JCBagriculturalbackhoe loader 3cx,4cx,214,215,217
Jcb 4CN PC
Maintenance schedule, common problems & OEM parts breakdown
The JCB 4CN is a backhoe loader manufactured from 2009 to 2017 with an operating weight of 8.85 tons. It is powered by a JCB DieselMax 4-cylinder turbocharged engine producing 81.5 kW (109 hp) and 500 Nm of torque at 1,400 rpm. The machine features a 4-speed powershift transmission, a 160-liter fuel tank, and a hydraulic system flow of 160 L/min (42.2 gpm). Configurations include a standard ROPS cabin, a 1.0–1.3 m³ (1.3–1.7 yd³) loader bucket, and a 0.2–0.3 m³ (0.26–0.39 yd³) backhoe bucket. The 4CN succeeded the 4C series and was followed by the 4CX series.
The 4CN PC designation indicates a specific configuration variant within the 4CN family. Across the 4CN generation, JCB utilized the DieselMax engine platform, which extended engine oil intervals to 500 hours by eliminating the need for DEF or DPF regeneration. This maintenance advantage, combined with the machine's ground-level access design for daily checks, drives its value in the used market. The 4CN PC remains a sought-after configuration for contractors requiring specific hydraulic or structural features distinct from the standard 4CN or the later 4CX models.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 4CN PC specifications
Engine
| Model | Perkins 444 |
| Net Power | 81 kW (109 hp) |
| Displacement | 4.4 L |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 8,850 kg (19,511 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 7.53 m (24.7 ft) |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speed | Not documented for this exact serial range — verify with your dealer |
| Digging Depth | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 4CN PC maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 100 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 4CN PC beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic system, axle, and final drive to establish a laboratory baseline. Compare subsequent samples against this baseline to detect developing bearing wear, seal failure, or contamination 500 to 800 hours before catastrophic failure. Inspect the hydraulic return filter magnet for metallic debris before disposal. Interpret hydraulic oil samples against the 500-hour baseline at the 1,000-hour service to determine if the next interval should be extended or compressed based on fluid condition.
Corrective & Common Repairs
Address turbocharger shaft play, charge cooler boot condition, and wastegate function on the DieselMax engine during the 1,000-hour service. Load test the alternator and starter to identify failing electrical components before they strand the machine. Check injector spray patterns via the diagnostic tool and replace injectors as required. Inspect hydraulic hoses for chafing and cylinder rods for scoring. Verify the integrity of the quick-hitch keeper pins and GET teeth to prevent safety alerts and operational delays.
Overhaul & Rebuild Points
At the 2,000-hour deep service, fully drain the hydraulic oil and clean the hydraulic tank. Inspect structural components including the boom, arm/dipper, loader arm, chassis, and side frames for cracking or unauthorized welding. Measure swing ring radial and axial play using a dial indicator on tracked variants. Service the brake system including disc wear and immersed brake condition. Measure complete undercarriage components against JCB wear limits to determine the need for track or roller replacement.
Seasonal & Environment Servicing
Check the cab HVAC system including A/C pressure, evaporator condition, and cabin filter replacement. Verify the condition of the charge cooler boot and turbocharger connections for optimal cooling performance. Inspect the cooling system for silicate separation in the expansion bottle. Ensure the engine oil meets the machine's API spec for the operating temperature range. Check battery electrolyte levels on non-sealed units and clean terminals to ensure reliable starting in cold conditions.
4CN PC common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 123/04176 | Filter, Air Conditioner | Air intake service | Check fitment → |
| 32/915801 | Element, Air, Safety | Air intake service | Check fitment → |
| 32/915802 | Element, Air, Main | Air intake service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
4CN PC fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Fuel filter blockage or lift pump failure | Check fuel filters and lift pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Coolant temperature sensor fault or wiring issue | Inspect sensor and wiring harness |
| P0521 | Engine oil pressure sensor range/performance issue | Oil pressure sensor fault or low oil level | Check oil level and sensor function |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Reductant injector circuit failure | Inspect SCR injector wiring and connections |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus communication failure or loose battery terminal | Check battery voltage and CAN bus connections |
| 101 | Low transmission clutch pressure detected | Transmission hydraulic pressure fault | Check transmission fluid level and pressure |
| F01 | Engine control module failure | ECU hardware or connection fault | Check ECU connections and power supply |
| E420 | Low hydraulic pressure | Hydraulic pump or system leak | Refill hydraulic fluid and check for leaks |
| E512 | Low voltage detected | Battery or charging system issue | Charge or replace battery |
| D901 | Communication error with display unit | CAN bus wiring fault to display | Inspect CAN bus wiring to display |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
4CN PC attachments & work tools
Buckets
JCB offers a range of buckets for the 4CN class, including Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading variants. These tools are designed to improve productivity, efficient digging, material retention, and clean release of material on job sites.
Breakers
An OEM hydraulic breaker range is available, engineered to work in harmony with JCB machines and other excavator or backhoe carriers. These breakers are extensively tested and approved by JCB engineers to ensure reliability and efficiency for demolition and breaking tasks.
Forestry Attachments
Specialist forestry attachments are included in the global range of over 2,000 products designed to enhance machine versatility. These tools allow the backhoe loader to perform specialized tasks in logging and land management applications.
Forks
Forks are available as standard or optional work tools for material handling applications. They attach to the base machine using a coupler or quick coupler system to enable lifting and transport of palletized or bundled loads.
Grabs and Grapples
JCB provides grabs and grapples for handling bulk materials such as wood, scrap, or debris. These attachments are designed to integrate with the machine's hydraulic system to provide secure gripping and controlled release of materials.
Lifting Equipment
The lifting equipment range has a capacity of 0.15 to 4 tons and features a compact design to improve operator visibility. They utilize a Q-Fit pick-up system to ensure easy attachment to the machine for safe handling of suspended loads.
Quickhitches
Quickhitches are used to attach work tools to the base machine, allowing for rapid tool changes. They serve as the primary coupler system for buckets, breakers, and other implements to enhance the versatility of the backhoe loader.
Shovels
Standard shovels are included with the base model configuration. These are designed for general excavation and loading tasks, providing the fundamental digging capability required for construction and earthmoving applications.
Snow Attachments
Snow attachments are available to extend the machine's utility into winter conditions. These tools allow the backhoe loader to perform snow removal and clearing tasks in addition to standard construction duties.
Sweepers
Sweepers are offered as specialist attachments to maintain job site cleanliness. They attach to the machine to provide efficient sweeping capabilities for dust and debris control on construction and industrial sites.
Specialist Attachments
A range of specialist attachments is designed for the toughest applications, enhancing the machine's performance on any job site. These tools address specific industry needs beyond standard earthmoving and loading tasks.
All 4CN PC assemblies by section
Every catalogued assembly group for the Jcb 4CN PC. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-2 Shovel, G.P 1.1m3, 2350mm (7'8.5") Wide, Quickhitch
| 12***04 | Toeplate | 1 |
| 12***86 | Shovel, Gp 1.1m3 Heavy Duty, Quickhitch 2350mm | 1 |
A1-4-4 Shovel, G.P 1.2m3, 8' Wide, Quickhitch
| 12***64 | Toeplate, 8' Wide | 1 |
| 12***51 | Shovel, Gp 1.2m3 Quickhitch, 8' Wide | 1 |
A1-5-2 Shovel, Clam, 6 In 1, 2350mm (7'8.5") Wide, 1.0m3
| 12***23 | Bush | 2 |
| 12***62 | Toeplate, 2343mm Long | 1 |
| 12***44 | Toeplate, 6 In 1, 7'8" Wide | 1 |
A1-7-2 Shovel, Clam, 6 In 1, 2235mm (7'4") Wide
| 12***23 | Bush | 2 |
| 12***49 | Bracket, Indicator | 1 |
| 12***45 | Toeplate, 6 In 1 Shovel, 7'4" Wide | 1 |
A1-8-2 Shovel, Clam, 6 In 1, 2350mm (7'8.5") Wide, Quickhitch
| 12***23 | Bush | 2 |
| 12***62 | Toeplate, 2343mm Long | 1 |
| 12***44 | Toeplate, 6 In 1, 7'8" Wide | 1 |
A1-4-3 Shovel, G.P 1.1m3, 2350mm (7'8.5") Wide, Quickhitch
| 12***04 | Toeplate | 1 |
| 12***49 | Shovel, Gp 1.1m3 Quickhitch, 7'8.5" Wide | 1 |
A1-10-1 Shovel, Clam, 6 In 1, 2450mm (8'0") Wide, 1.3m3
| 12***23 | Bush | 2 |
| 12***74 | Pivot, Casting, Right Hand | 2 |
| 12***75 | Pivot, Casting, Left Hand | 1 |
A1-9-1 Shovel, Clam, 6 In 1, 2210mm (7'3") Wide
| 12***23 | Bush | 2 |
| 12***49 | Bracket, Indicator | 1 |
| 12***74 | Pivot, Casting, Right Hand | 1 |
A1-1-5 Shovel, G.P 1.1m3, 2350mm (7'8.5") Wide
| 12***55 | Toeplate | 1 |
| 12***00 | Shovel, Gp 1.1m3, 2350mm (7'8.5") Wide | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A1-3-2 Shovel, G.P 1.0m3, 2253mm (7'4") Wide
| 12***23 | Toeplate | 1 |
| 12***00 | Shovel, Gp 1.0m3, 2235mm (7'4") Wide | 1 |
| 12***00 | Shovel, Gp 1.0m3 Heavy Duty, 2235mm (7'4") Wide | 1 |
A1-1-2 Shovel, G.P 1.1m3, 2350mm (7'8.5") Wide
| 12***07 | Toeplate, 2350mm Long | 1 |
| 12***00 | Shovel, Gp 1.1m3 7'8" Wide, 215; Replaced By 12***66, See San08647 | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A1-1-7 Shovel, G.P 1.3m3, 2350mm (7'8.5") Wide, Heavy Duty
| 12***14 | Toeplate | 1 |
| 12***00 | Shovel, Gp 1.3m3 Heavy Duty, 2350mm (7.8.5") Wide | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A1-5-3 Shovel, Clam, 6 In 1, 2350mm (7'8.5") Wide, 1.2m3
| 12***23 | Bush | 2 |
| 12***59 | Pivot, Casting; Part Is Mss Use 12***74, 12***75, See San05162 | 2 |
| 12***62 | Toeplate, 2343mm Long | 1 |
A1-8-1 Shovel, Clam, 6 In 1, 2450mm (8'0") Wide, Quickhitch
| 12***23 | Bush | 2 |
| 12***74 | Pivot, Casting, Right Hand | 2 |
| 12***75 | Pivot, Casting, Left Hand | 1 |
A2-3-1 Blade, Grading 5'
| 13***1Z | Nut | 6 |
| 14***11 | Washer | 6 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-4-3 Bucket, Jaw, 600mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***05 | Collar | 1 |
| 12***17 | Bush | 2 |
A2-4-1 Bucket, Jaw, 305mm Wide
| 10***18 | Pin, Pivot | 1 |
| 12***17 | Bush | 2 |
| 13***14 | Bolt | 2 |
A2-5-1 Blade, Attachment, 4, 60 & 600 Jaw Bucket
| 13***4Z | Bolt, 3/8"Unf X 2" | 6 |
| 13***26 | Bolt, L=1.3/4" | 1 |
| 13***3Z | Nut | 7 |
A2-4-2 Bucket, Jaw, 460mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***05 | Collar | 1 |
| 12***17 | Bush | 2 |
A2-3-4 Bucket, 1800mm Wide, Ditch Cleaning, Dedicated Q/Hitch
| 98***03 | Toeplate, 2000mm Wide | 1 |
| 98***00 | Bucket, Ditch Cleaning, 1800mm Wide | 1 |
A2-1-5 Bucket, Ribbed
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 6 |
A2-5-1 Asphalt Cutter, Atta, Chment, Jaw Bucket
| 13***4Z | Bolt, 3/8"Unf X 2" | 6 |
| 13***26 | Bolt, L=1.3/4" | 1 |
| 13***3Z | Nut | 7 |
A2-3-2 Blade, Grading 6'
| 13***1Z | Nut | 8 |
| 14***11 | Washer | 8 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-2-1 Tooth, Ripper
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-1-8 Bucket, Ribbed, Dedicated Q/Hitch
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut | 6 |
| 53***05 | Tooth | 0 |
A2-1-9 Bucket, Standard, Spanish Build
| 10***04 | Boss, Pivot | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 80***32 | Bush, Spring | 4 |
A2-1-2 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 7 |
A2-3-3 Bucket, 1500mm Wide, Ditch Cleaning, Dedicated Q/Hitch
| 98***10 | Toeplate, 1500mm Wide | 1 |
| 98***00 | Bucket, Ditch Cleaning, 1500mm Wide | 1 |
A2-1-1 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 6 |
A2-2-1 Bucket, Tapered Ditc, Hing
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-6-1 Adapter Bracket, Dedicated Q/Hitch, Conversion
| 33***47 | Bracket, Dedicated Quickhitch, 3cx 4cx | 1 |
| 98***00 | Adapter, Bracket, Dedicated Q/Hitch; Replaced By 98***00 | 1 |
| 98***00 | Adapter, Bracket, Dedicated Q/Hitch | 1 |
A2-2-1 Blade, Back Fill
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A3-8-1 Fork Frames & Forks, Industrial
| 12***74 | Fork, 2t S.W.L. | 1 |
| 12***51 | Fork, 2t S.W.L., 1500mm Long | 1 |
| 98***00 | Frame, Fork | 1 |
A3-2-3 Guard, Tooth, Optional, 2253mm (7'4") Wide Shovels
| 12***00 | Guard, Tooth | 1 |
| 12***00 | Bracket | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
A3-8-2 Fork Frames & Forks, Industrial, 4'6"
| 12***47 | Frame, Fork | 1 |
| 54***00 | Fork, Industrial, 100w X 45t X 1200l | 1 |
| 99***00 | Kit-Fork Retention, Class 2 Fork; Longer Pin Than 99***00. Class 2 Fork Rating,1000-2000 Kgs. Class 3 Fork Rating, 2501-4999 Kgs., Kit-Fork Retention, Class 2 Fork; Longer Pin Than 99***00. Class 2 Fork Rating, 1000 - 2000 Kgs, Class 3 Fork Rating, 2501 - 4999 Kgs, Kit-Fork Retention, Class 2 Fork, Kit-Fork Retention, Class 2 Fork; Longer Pin Than 99***00. Class 2 Fork Rating, 1000-2000 Kgs. Class 3 Fork Rating, 2501-4999 Kgs. | 1 |
A3-9-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-7-3 Tooth Option, 2253mm, (7'4") Shovel
| 13***01 | Nut | 24 |
| 14***11 | Washer | 8 |
| 53***05 | Tooth | 8 |
A3-34-1 Pump, Submersible
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***02 | Nut | 1 |
| 13***8Z | Capscrew | 6 |
A3-25-4 Circuit, Compactor, Backhoe Attachment
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
A3-2-1 Guard, Tooth, Optional, 2350mm (7'8.5") Wide Shovels
| 12***00 | Bracket | 1 |
| 12***00 | Guard, Tooth, 2350mm (7'8.5") Wide | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
A3-4-1 Crane, Fork Mounted
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***39 | Attachment, Crane Hook Assembly, Fork Mounted | 1 |
A3-1-4 Fork Lift, 6 In 1 Clam Shovel, Mounted 1.2m3
| 12***32 | Pin, Pivot | 2 |
| 12***93 | Bracket, Fork Rail Support | 2 |
| 12***94 | Bracket, Fork Rail Support | 1 |
A3-22-6 Patch Planer, 400mk2, Hydraulic Motor
| 13***10 | Screw, Cap | 20 |
| 82***91 | Washer, M10 Shake-Proof | 20 |
| 90***26 | Motor, Hydraulic | 1 |
A3-6-7 Quickhitch, Industrial, Hydraulic C/W Forks
| 12***32 | Pin, Pivot | 4 |
| 12***26 | Plate, Shovel Stop, 12mm | 2 |
| 12***47 | Plate, Shovel Stop, 25mm | 4 |
A3-25-3 Compactor, Backhoe Attachment
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 16 |
A3-23-21 Earth Drill Jcb 2150, Components
| 98***88 | Kit, Earth Drill | 1 |
| 98***77 | Sprocket | 1 |
| 98***78 | Chain, Drive | 1 |
A3-11-1 Shovel, Right Hand Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-11-10 Shovel, Left Hand Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-7-2 Tooth Option, 2438mm, (8'0") Shovel
| 13***01 | Nut | 27 |
| 14***11 | Washer | 9 |
| 53***05 | Tooth | 9 |
A3-7-3 Toeplate Option, 225, 3mm (7'4") Shovel
| 13***01 | Nut | 24 |
| 14***11 | Washer | 8 |
| 53***05 | Tooth | 8 |
A3-22-5 Patch Planer, 400mk2
| 13***4Z | Bolt | 4 |
| 13***4Z | Bolt, M20 X 60mm | 8 |
| 13***5Z | Bolt | 2 |
A3-6-1 Quickhitch, Attachment, Loader
| 12***56 | Handle, Grip | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***7Z | Bolt | 3 |
A3-22-4 Circuit, Patch Planer 400 Mk2
| 13***9Z | Bolt, M10x90mm | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 5 |
| 14***26 | Washer, Seal | 1 |
A3-1-6 Fork Lift, Gp Shovel Mounted
| 12***32 | Pin, Pivot | 2 |
| 12***27 | Fork | 2 |
| 12***96 | Block, Rubber Pad | 2 |
A3-23-23 Earth Drill, Attachments, Dfb Series
| 98***97 | Bit, 6" Earth Drill, Light Duty | 1 |
| 98***98 | Bit, 9" Earth Drill, Light Duty | 1 |
| 98***99 | Bit, 12" Earth Drill, Light Duty | 1 |
A3-1-5 Fork Lift, 6 In 1 Clam Shovel, Mounted 1.0m3
| 12***32 | Pin, Pivot | 2 |
| 12***93 | Bracket, Fork Rail Support | 2 |
| 12***94 | Bracket, Fork Rail Support | 1 |
A3-24-5 Quickhitch, Attachment, Backhoe
| 12***57 | Latch | 1 |
| 12***61 | Bolt, Trunnion | 2 |
| 12***62 | Pin, Pivot | 1 |
A3-7-1 Toeplate Option, 235, 0mm (7'8.5") Shovel
| 13***01 | Nut | 8 |
| 13***1Z | Nut | 16 |
| 14***11 | Washer | 8 |
A3-6-4 Quickhitch, Industrial, Hydraulic
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***18 | Bolt | 2 |
| 13***3Z | Nut | 4 |
A3-24-2 Quickhitch, Attachment, Backhoe
| 12***18 | Hook | 1 |
| 12***19 | Plate, Retaining | 1 |
| 12***21 | Pin, Locking | 1 |
A3-10-1 Snow Plough
| 99***00 | Blade, Dozer, Snow | 1 |
| 99***01 | Frame | 1 |
| 99***02 | Toeplate | 1 |
A3-24-4 Quickhitch, Dedicated, Backhoe Attachment
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 14***7Z | Washer | 2 |
A3-2-2 Guard, Tooth, Optional, 2438mm (8'0") Wide Shovels
| 10***00 | Guard, Tooth | 1 |
| 12***00 | Bracket | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
A3-6-5 Quickhitch, Industrial, Hydraulic
| 13***3Z | Screw, 1/4 Unf X .625 | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Screw, M6x16 | 12 |
A3-7-2 Toeplate Option, 243, 8mm (8'0") Shovel
| 13***01 | Nut | 27 |
| 14***11 | Washer | 9 |
| 53***05 | Tooth | 9 |
A3-7-1 Tooth Option, 2350mm, (7'8.5") Shovel
| 13***01 | Nut | 8 |
| 13***1Z | Nut | 16 |
| 14***11 | Washer | 8 |
A3-23-22 Earth Drill, Attachments, Lp Series
| 98***04 | Bit, Earth Drill, 12" Heavy Duty | 1 |
| 98***05 | Bit, 18" Earth Drill, Heavy Duty | 1 |
| 98***06 | Bit, 24" Earth Drill, Heavy Duty | 1 |
B Bodywork, Cab, Loader End
B1-7-23 Step, Cab Access, Batterybox, Fuel Tank
| 12***67 | Step, Lower | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 8 |
| 13***7Z | Bolt, M10x25 | 4 |
B1-19-10 Mounting, Wheel Chock, Aws
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 12***32 | Bracket, Wheel Chock Mounting, Right Hand | 1 |
B1-19-1 Mounting, Wheel Chock
| 12***01 | Strap | 2 |
| 12***28 | Wheel, Chock.; Replaced By 14***63, See San08553 | 2 |
| 12***62 | Bracket, Wheel Chock Mounting, Right Hand | 1 |
B1-21-1 Retaining Straps, Loader End, Excavator End
| 12***22 | Strap, Retaining Loader Arm, 1060mm Long | 1 |
| 12***23 | Strap, Retaining Excavator, 3550mm Long | 1 |
| 12***24 | Strap, Retaining Excavator, 3900mm Long | 1 |
B1-13-1 Valve Mountings, Excavator & Loader
| 12***46 | Mounting, Rubber | 3 |
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***7Z | Bolt, M8 X75mm Long | 2 |
B1-1-1 Chassis Centremount, 2ws
| 12***71 | Chassis, 2ws Centremount, 14' Excavator | 1 |
| 12***00 | Bracket, Rear Cab Mounting | 2 |
| 12***00 | Frame, Rear Centremount | 1 |
B1-3-2 Tank, Diesel Fuel, 150 Litres
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***86 | Plug, Drain; San 23362.Cwe To 32/92***90.Approved T Bland, D Bickerton.15/2/2007. | 1 |
| 12***62 | Tank, Diesel Fuel, 150 Litre | 1 |
B1-2-2 Tank, Hydraulic
| 12***27 | Tube, Hydraulic Filler, Neck | 1 |
| 12***17 | Cover, Plate | 1 |
| 12***92 | Cap, Hydraulic Filler; See Note 1. Use 29***00 To Replace 12***92, Cap, Hydraulic Filler | 1 |
B1-8-10 Mudguards, Rear, Black, Optional 2ws
| 12***73 | Fender, Left Hand, Black | 1 |
| 12***74 | Fender, Right Hand, Black | 1 |
| 12***83 | Spacer | 10 |
B1-10-12 Pads, Street, Stabiliser, Centremount
| 10***47 | Pin, Pivot | 2 |
| 12***71 | Strip, Rubber | 19 |
| 12***72 | Clamp, Street Foot | 1 |
B1-1-3 Chassis Centremount, 2ws
| 12***00 | Bracket, Rear Cab Mounting | 2 |
| 12***00 | Frame, Rear Centremount | 1 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
B1-1-2 Chassis Centremount, 2ws
| 12***72 | Chassis, 2ws Centremount, 15' & 17' Excavator | 1 |
| 12***00 | Frame, Rear Centremount | 1 |
| 12***00 | Yoke, 2ws Axle | 1 |
B1-5-2 Bonnet
| 12***63 | Spacer | 2 |
| 12***80 | Bonnet, Without Pre-Cleaner | 1 |
| 12***81 | Bonnet, With Pre-Cleaner | 1 |
B1-11-1 Engine Sidepanel, 2ws
| 12***77 | Panel, Engine Side, Left Hand | 1 |
| 12***78 | Panel, Engine Side, Right Hand | 1 |
| 12***64 | Shield, Heat | 1 |
B1-1-10 Chassis Centremount, Aws
| 11***07 | Boss | 1 |
| 12***90 | Bracket, Bumper Mounting, Left Hand | 1 |
| 12***91 | Bracket, Bumper Mounting, Right Hand | 1 |
B1-16-30 Mudguard Extension, Aws, For Use With Toolbox
| 12***67 | Guard, Right Hand Extension, Use With Toolbox | 1 |
| 12***71 | Guard, Left Hand Extension | 1 |
| 12***64 | Guard, Right Hand Extension | 1 |
B1-6-10 Grille, Front, Aws
| 12***68 | Bumper, Aws 105kg Cast | 1 |
| 12***25 | Baffle, Bumper Infill, Aws | 1 |
| 12***40 | Casting, Jcb Logo Plate | 1 |
B1-9-30 Mudguards, Front, Black, Optional, Aws
| 12***52 | Bracket, Lower Left Hand | 1 |
| 12***53 | Bracket, Lower Right Hand | 1 |
| 12***54 | Bracket, Upper Left Hand | 1 |
B1-9-10 Mudguards, Front, Black, Optional, 2ws
| 12***93 | Bracket, Upper, Left Hand | 1 |
| 12***94 | Bracket, Upper, Right Hand | 1 |
| 12***74 | Fender, Front Left Hand, Black, 343mm Wide | 1 |
B1-1-4 Chassis Centremount, 2ws
| 12***00 | Frame, Rear Centremount | 1 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
| 33***52 | Pad, Yoke Axle Pivot | 1 |
B1-8-30 Mudguards, Rear, Black, Optional Aws
| 12***73 | Fender, Left Hand, Black | 1 |
| 12***74 | Fender, Right Hand, Black | 1 |
| 12***83 | Spacer | 10 |
B1-16-10 Mudguard Extension, Aws
| 12***57 | Guard, Right Hand Extension | 1 |
| 12***59 | Guard, Left Hand Extension | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B1-8-1 Mudguards, Rear, Yellow, 2ws
| 12***69 | Fender, Left Hand | 1 |
| 12***70 | Fender, Right Hand | 1 |
| 12***13 | Sleeve, 10mm I/D, 16.5 Lg. | 10 |
B1-6-1 Grille, Front, 2ws
| 12***66 | Bumper, 2ws 90kg Cast | 1 |
| 12***67 | Bumper, 2ws 250kg Cast | 1 |
| 12***24 | Blank, Bumper Infill, (2ws 90kg) | 1 |
B1-8-20 Mudguards, Rear, Yellow, Aws
| 12***98 | Fender, Left Hand | 1 |
| 12***99 | Fender, Right Hand | 1 |
| 12***13 | Sleeve, 10mm I/D, 16.5 Lg. | 10 |
B1-4-2 Stabiliser, Centremount
| 10***19 | Pin, Pivot | 2 |
| 12***32 | Bush | 2 |
| 12***56 | Leg, Stabiliser; Replaced By 12***55, See San 10251 | 2 |
B1-9-1 Mudguards, Front, Yellow, 2ws
| 12***23 | Fender, Front Left Ahnd, Yellow, 343mm Wide | 1 |
| 12***24 | Fender, Front Right Hand, Yellow, 343mm Wide | 1 |
| 12***93 | Bracket, Upper, Left Hand | 1 |
B1-1-11 Chassis Centremount, Aws
| 11***07 | Boss | 1 |
| 12***74 | Chassis, Aws Centremount, 15' 17' Excavator | 1 |
| 12***00 | Frame, Rear Centremount | 1 |
B1-15-2 Battery Box
| 12***79 | Bush, Hinge | 2 |
| 12***87 | Handle, Locking | 1 |
| 12***89 | Pin, Hinge | 2 |
B1-6-2 Grille, Front, 2ws
| 12***00 | Guard, Grille Housing, 2ws | 1 |
| 12***55 | Grille, Assembly Front; Replaced By 12***80, See San09798 | 1 |
| 12***80 | Grille, Assembly, Front; Replaced By 12***58, See San 12660 | 1 |
B1-6-20 Counterweight
| 12***67 | Bumper, 2ws 250kg Cast | 1 |
| 12***76 | Counterweight, 88kg | 1 |
| 12***77 | Counterweight, 80kg | 1 |
B1-3-21 Tank, Diesel Fuel, 130 Litres
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***86 | Plug, Drain; San 23362.Cwe To 32/92***90.Approved T Bland, D Bickerton.15/2/2007. | 1 |
| 12***21 | Tank, Diesel Fuel, 130 Litre | 1 |
B1-11-10 Engine Sidepanel, Aws
| 12***64 | Shield, Heat | 1 |
| 12***65 | Handle; Replaced By 12***55, See San08835 | 2 |
| 12***30 | Handle, Locking, 180 Deg | 2 |
B1-10-14 Pads, Street, Stabiliser, Centremount
| 12***61 | Pad, Street | 2 |
| 12***62 | Roller | 1 |
| 12***63 | Sleeve | 1 |
B1-9-20 Mudguards, Front, Yellow, Aws
| 12***50 | Fender, Front Left Hand, 420mm Wide | 1 |
| 12***51 | Fender, Front Right Hand, 420mm Wide | 1 |
| 12***52 | Bracket, Lower Left Hand | 1 |
B1-14-12 Toolbox, Use With 130 Litre Fuel Tank
| 12***79 | Bush, Hinge | 2 |
| 12***43 | Buffer | 1 |
| 12***87 | Handle, Locking | 1 |
B2-10-1 Cab Mountings
| 12***02 | Plate, Compression | 8 |
| 12***84 | Spacer | 2 |
| 12***00 | Mounting, Cab Front | 1 |
B2-25-1 Cab Bulkhead Plate, Electrics
| 12***77 | Plate | 1 |
| 12***32 | Seal | 1 |
| 12***49 | Plate, Bulkhead | 1 |
B2-9-1 Visor, Sun
| 12***16 | Bracket, Sun Visor | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 33***72 | Visor, Sun | 1 |
B2-7-30 Seat, Suspension, With Heater
| 12***98 | Pedestal, Seat; Replaced By 12***98, See San08817 | 1 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-5-10 Window, Rear, Tinted Glass, Direct Glazing
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 12***02 | Handle, Left Hand | 1 |
| 12***15 | Cap | 4 |
B2-8-10 Wash/Wipe, Rear Screen
| 12***70 | Bottle, Front & Rear, Sceen Wash | 1 |
| 12***31 | Bottle, Front & Rear, Screen Wash | 1 |
| 24***11 | Grommet, Groove Dia 25.4mm, Panel Thkness 2-3mm | 1 |
B2-8-1 Wash/Wipe, Windscreen
| 12***69 | Bottle, Front Screen Wash | 1 |
| 12***05 | Spacer | 1 |
| 12***17 | Bracket, Washer Bottle | 1 |
B2-18-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-7-1 Seat, Servo Additions
| 12***16 | Cap, Carriage Bolt | 2 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
| 12***03 | Pod, Control Left Hand, Servo Seat | 2 |
B2-5-11 Window, Rear, Tinted Glass, Direct Glazing Electical Mechanism
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 12***02 | Handle, Left Hand | 1 |
| 12***15 | Cap | 2 |
B2-19-1 Cover, Vandal Proof, Instrument Panel
| 12***86 | Catch, Vandal Cover | 1 |
| 12***96 | Cover, Vadal; Replaced By 12***21, See San009536 | 1 |
| 12***36 | Bracket, Vandal Cover Lock | 1 |
B2-17-1 Gear Lever Blank, Powershift Build
| 12***87 | Cover, Plate | 1 |
| 12***00 | Cover, Plate, Floor Mat Insert | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
B2-24-1 Door Stay
| 12***74 | Stay, Left Hand Door | 1 |
| 12***75 | Stay, Right Hand Door | 1 |
| 12***76 | Stop, Door Stay | 2 |
B2-16-1 Stowage Box
| 12***37 | Catch | 1 |
| 12***60 | Cover, Left Hand Toolbox | 1 |
| 12***63 | Pin, Hinge | 1 |
B2-3-20 Door Opening Window
| 12***40 | Plug, Blanking, 7mm | 1 |
| 12***01 | Lever, Upper | 2 |
| 12***02 | Lever, Lower | 2 |
B2-22-1 Coat Tidy
| 12***79 | Strap, Coat Tidy | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 14***02 | Screw, No 8x1/2" | 1 |
B2-7-10 Seat, Suspension
| 12***99 | Rail, Left & Right Hand, Slide | 1 |
| 12***78 | Seat, Assembly C/W Arms, & Pedestal, Servo; Replaced By 12***75, See San 12682 | 1 |
| 12***75 | Seat, Assembly C/W Arms, & Pedestal, Servo; Replaced By 12***18, See San 12833 | 1 |
B2-6-1 Soundproofing, Cab Base
| 12***59 | Panel, Right Hand Fender | 1 |
| 12***57 | Plate, Auxiliary Pedal Blanking | 2 |
| 12***39 | Mat, Floor Underlay, Insert, Seat | 1 |
B2-12-2 Cab Front Seal
| 12***97 | Cover, Brake Cylinder, Non Servo | 1 |
| 12***98 | Cover, Brake Cylinder, Servo | 1 |
| 13***8Z | Screw, M6 X 30mm Long | 7 |
B2-27-1 Access Plates, Loader Valve, Excavator Valve
| 12***05 | Plate, Access, Excavator Valve | 1 |
| 14***03 | Screw | 7 |
| 33***37 | Plate, Loader Valve Access, + Fuse & Relay Mount | 1 |
B2-13-1 Cab Rear Valance, Centremount
| 12***45 | Cover, Rear Valance, Yellow | 1 |
| 12***15 | Cover, Rear Valance Yellow, Centremount Hammer | 1 |
| 82***54 | Washer, Plain | 5 |
B2-6-21 Soundproofing, Cab Roof, Twin Speakers & Clock
| 12***16 | Lining, Rear Cab Roof | 1 |
| 12***22 | Bracket, Mounting | 2 |
| 12***98 | Lining, Rear Cab Roof, Use With Face Fan | 1 |
B2-11-1 Mirror, External & Interior
| 12***68 | Arm, Right Hand Mirror | 1 |
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 2 |
B2-23-1 Cab Roof, Uk & World
| 12***47 | Spacer | 2 |
| 12***50 | Roof, Cab, Uk & World, Yellow | 1 |
| 12***40 | Roof, Cab, Black | 1 |
B2-2-10 Cab Glazing, Tinted, Direct Glazing
| 82***81 | Glass, Sixlights, Left Hand | 1 |
| 82***82 | Glass, Sixlights, Right Hand | 1 |
| 82***63 | Glass, Front Bulkhead, Left Hand | 1 |
B2-4-10 Window, Side, Tinted Glass, Direct Glazing
| 11***22 | Handle | 1 |
| 12***06 | Window, Left Hand Side; Replaced By 33***55, See San 12578, Window, Left Hand Side; Replaced By 33***55, See San 12578, Use With Fixed Window. Cut-In Number = M480988 + M480974, M480979, M480985 & M480986. | 1 |
| 12***07 | Window, Right Hand Side; Replaced By 33***54, See San 12578 | 1 |
B2-28-1 B Post Moulding, Refresh Build
| 33***33 | Moulding, B Post | 1 |
| 33***97 | Retainer, Ellastic | 1 |
| 33***30 | Cover, Cargo Net, B Post Moulding | 1 |
B2-3-10 Door, Tinted Glass, Direct Glazing
| 12***29 | Grommet | 1 |
| 12***30 | Grommet | 1 |
| 12***58 | Cover, Door Lock, Right Hand; Replaced By 33***58 | 1 |
B2-1-1 Cab Shell, Unglazed
| 12***96 | Hook, Coat | 1 |
| 12***32 | Stop | 2 |
| 12***37 | Guard | 2 |
B3-3-1 Arms, Loader, Shovel Linkage
| 12***23 | Bush | 6 |
| 12***01 | Lever, Shovel, 479mm Long | 4 |
| 12***91 | Plate, Stop; Replaced By 12***26 | 2 |
B3-4-1 Safety Strut, Loader Arms
| 12***70 | Strut, Safety, 650mm | 1 |
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
B3-1-1 Arms, Loader
| 12***00 | Arm, Loader, 2500mm Long; Replaced By 12***06, See San 13042 | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
B3-3-11 Arms, Loader, Shovel Linkage, Austrian, Swiss, Italian
| 12***23 | Bush | 6 |
| 12***07 | Lever, Crowd, 500mm Long | 4 |
| 12***49 | Strut | 1 |
B3-1-10 Arms, Loader
| 12***00 | Arm, Loader, 2690mm Long | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
B3-3-10 Arms, Loader, Shovel Linkage
| 12***23 | Bush | 6 |
| 12***07 | Lever, Crowd, 500mm Long | 4 |
| 12***91 | Plate, Stop; Replaced By 12***26 | 2 |
B3-3-5 Arms, Loader, Shovel Linkage, Austrian, Swiss, Italian
| 12***23 | Bush | 6 |
| 12***01 | Lever, Shovel, 479mm Long | 4 |
| 12***49 | Strut | 1 |
B3-2-10 Arms, Loader, Interlever
| 12***03 | Spacer | 4 |
| 12***23 | Bush | 4 |
| 12***10 | Plate, Interlever | 4 |
B3-2-1 Arms, Loader, Interlever
| 12***03 | Spacer | 4 |
| 12***23 | Bush | 4 |
| 12***20 | Plate, Interlever | 4 |
B4-2-1 Slew/Swing, Components
| 12***37 | Seal | 4 |
| 12***28 | Disc, Blanking | 1 |
| 12***40 | Cap, Bolt Cover | 2 |
B4-5-1 Dipper (Stick), Mono
| 10***01 | Strap | 1 |
| 12***00 | Lever, Tipping, Single Link Position | 1 |
| 12***00 | Lever, Tipping, Twin Link Position | 1 |
B4-10-10 Boom Lock, In Cab Controls, 15'6 & 17'0 Centremount
| 12***34 | Lever, Boomlock, Red Grip | 1 |
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
B4-9-1 Instalation, Beacon Light, Mounted On Excavator End
| 12***11 | Bracket, Beacon Mounting, Basic Dipper | 1 |
| 12***91 | Bracket, Beacon Light, Extradig Dipper; Replaced By 12***33, See San09490a | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
B4-4-30 Boom, Knuckle
| 12***20 | Boom, 2565.5mm Long, Knuckle | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***1Z | Bolt, M12x110 | 1 |
B4-5-30 Dipper (Stick), Knuckle
| 10***01 | Strap | 1 |
| 12***00 | Lever, Speed/Power | 1 |
| 12***36 | Dipper, Knuckle | 1 |
B4-4-1 Boom
| 12***21 | Pivot, Boom Eye End Casting | 1 |
| 12***22 | Pivot, Boom Nose Casting; Superseded To Nla, San21025 | 1 |
| 12***83 | Boom, 2390mm Long 8mm S/Pl, Heavy Lift | 1 |
B4-10-1 Boom Lock, In Cab Controls, 14'0 Centremount
| 12***34 | Lever, Boomlock, Red Grip | 1 |
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
B4-6-1 Dipper (Stick), Extradig
| 10***01 | Strap | 1 |
| 12***01 | Clip | 1 |
| 12***15 | Pad, Wear Strip, Bottom, Green | 4 |
B4-11-1 Kingpost, Bulkhead
| 12***48 | Plate, Bulkhead, Kingpost | 1 |
| 12***45 | Plate, Bulkhead, Centrmount, Wainroy | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
B4-5-10 Dipper (Stick), Mono
| 10***01 | Strap | 1 |
| 12***00 | Lever, Speed, Power | 1 |
| 12***00 | Lever, Speed, Power, Jaw | 1 |
B4-12-2 Kinkpost Hose Clamps
| 12***68 | Clamp, 5/8" Top, Centremount | 2 |
| 12***69 | Plate, Clamp | 4 |
| 12***89 | Clamp, 5/8" Middle | 2 |
B4-8-1 Tipping Link, Standard
| 12***47 | Link, Tipping | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-6-10 Dipper (Stick), Extradig
| 10***01 | Strap | 1 |
| 12***01 | Clip | 1 |
| 12***15 | Pad, Wear Strip, Bottom, Green | 4 |
B4-7-1 Knuckle, Boom Pivot
| 12***14 | Washer, Thrust | 1 |
| 12***37 | Pivot, Knuckle; Part Is Mss Use 12***93 X1 + 80***33 X2, See San 10507 | 1 |
| 12***38 | Link, Pivot, Dipper Ram | 1 |
B4-3-1 Kingpost, 14'0 Backhoe
| 12***26 | Spacer | 1 |
| 12***27 | Washer, Thrust; Replaced By 82***70 | 2 |
| 12***43 | Spacer | 1 |
B4-8-20 Tipping Link, With Lifting Hook
| 12***50 | Link, Tipping | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-4-10 Boom
| 12***33 | Pivot, Boom Nose End, Casting | 1 |
| 12***85 | Boom, 2730mm Long, Centremount | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B4-3-10 Kingpost, 15'6 & 17'0 Backhoe
| 12***26 | Spacer | 1 |
| 12***27 | Washer, Thrust; Replaced By 82***70 | 2 |
| 12***43 | Spacer | 1 |
B5-5-1 Paint
| 42***01 | Thinners, 1 Litre, 2-Pack | 0 |
| 42***40 | Paint, Gloss, 0.5 Litre, Two Pack Yellow | 0 |
| 42***43 | Paint, Gloss, 5 Litre, Two Pack Yellow | 0 |
B5-2-2 Decals 4cx444
| 81***50 | Label, Transmission Filler | 1 |
| 81***55 | Label, Diesel | 1 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
B5-5-2 Paint, Nato Green
| 42***02 | Paint, Eau-De-Nil, Undercoat | 1 |
| 42***02 | Paint, Green, Nato | 1 |
B5-1-1 Decals, Loader & Excavator, Iso + Pattern Controls
| 81***54 | Decal, Excavator Cont. Iso+, Servo Qh | 1 |
| 81***55 | Decal, Loader Control Iso +, Servo | 1 |
| 81***72 | Decal, Excavator Cont. Iso, Servo Sideshift | 1 |
B5-3-2 Tool Kit
| 27***00 | Bag, Tool | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
B5-2-1 Decals, 3cx/Sitemaster
| 81***50 | Label, Transmission Filler | 1 |
| 81***55 | Label, Diesel | 1 |
| 81***80 | Label, Drain Every 50 Hours | 1 |
B5-4-2 Fire Extinguisher
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
| 82***68 | Rivet, Nut | 2 |
C Electrics-Machine, Cab & Engine
C1-1-20 Harness, 2ws Machine Electric, Powershift Transmission
| 71***00 | Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Coloured Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way, Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Coloured Harness. | 1 |
| 71***00 | Diode, Gate Assembly, Double | 1 |
| 71***00 | Plug, 6 Diode, Aws | 1 |
C1-20-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-4-3 Light, Head, 12.Volt, Left Hand Dip, White
| 70***00 | Light, Head Assembly, Left Hand Dip | 2 |
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
C1-1-63 Harness, Aws Machine Electric, Auto-Powershift 40kph Transmission
| 70***82 | Diode, Single | 2 |
| 70***88 | Diode, Dual Assembly | 1 |
| 71***58 | Strap, Earth | 1 |
C1-17-1 Inclinometer, Lev-O-Gage.
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-16-1 Electrics, Machine Switches, Gauges
| 10***01 | Gasket | 1 |
| 13***2Z | Nut | 2 |
| 14***5Z | Washer, 1/2", Medium | 1 |
C1-14-1 Mountings & Supports, Harness
| 12***95 | Clip, Harness Support | 1 |
| 12***65 | Clip | 4 |
| 12***47 | Clip, Cable | 1 |
C1-1-60 Harness, Aws Machine Electric, Powershift Transmission
| 71***00 | Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Coloured Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way, Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Coloured Harness. | 2 |
| 71***06 | Harness, Alternator | 1 |
| 71***73 | Harness, Esos, Darwin Engine | 1 |
C1-3-12 Light, Rear, Centremount, European
| 24***13 | Grommet | 2 |
| 33***92 | Bracket, Rear Light Mounting, Right Hand | 1 |
| 33***93 | Bracket, Rear Light Mounting, Left Hands | 1 |
C1-1-22 Harness, 2ws Machine Electric, Powershift Transmission
| 70***82 | Diode, Single | 3 |
| 70***83 | Diode, Twin | 1 |
| 70***88 | Diode, Dual Assembly | 1 |
C1-5-2 Light, Working, Cab Rear
| 12***05 | Bracket | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-3-11 Light, Rear, Centremount, European
| 12***53 | Bracket, Rear Light Mounting, Right Hand | 1 |
| 12***54 | Bracket, Rear Light Mounting, Left Hand | 1 |
| 24***13 | Grommet | 2 |
C1-4-5 Light, Head, 12.Volt, Right Hand Dip, Austrian Homologation
| 12***00 | Clamp | 8 |
| 12***13 | Bracket, Right Hand Headlight, Toothguard | 1 |
| 12***14 | Bracket, Left Hand Headlight, Toothguard | 1 |
C1-1-62 Harness, Aws Machine Electric, Powershift Transmission
| 70***82 | Diode, Single | 3 |
| 70***83 | Diode, Twin | 1 |
| 70***88 | Diode, Dual Assembly | 1 |
C1-1-23 Harness, 2ws Machine Electric, Auto-Powershift 40kph Transmission
| 70***82 | Diode, Single | 2 |
| 70***88 | Diode, Dual Assembly | 1 |
| 71***58 | Strap, Earth | 1 |
C1-8-1 Light, Highway, Dipper Hazard
| 10***01 | Spring, 24" Bungy | 1 |
| 70***00 | Wire, With Plug | 1 |
| 70***01 | Plug | 1 |
C1-2-1 Battery 12v, Carrier
| 10***00 | Clamp | 1 |
| 12***65 | Clip | 2 |
| 12***73 | Box, Battery; Replaced By 12***20 | 1 |
C1-4-4 Light, Head, 12.Volt, Right Hand Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***00 | Light, Head Assembly, Right Hand Dip | 2 |
| 70***01 | Lens, Assembly, Headlight | 1 |
C1-4-20 Mounting, Head Light
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 12***82 | Bracket, Left Hand Head Light; Replaced By 12***20, See San10047 | 1 |
| 12***83 | Bracket, Right Hand Headlight; Replaced By 12***21, See San10047 | 1 |
C1-10-1 Pump, Diesel, Refuelling, Optional
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-1-1 Harness, Servo, Additions
| 71***00 | Plug, Junior Timer Sealed, Socket Ho. Amp 2-Way | 1 |
| 71***40 | Lead, Link | 1 |
| 71***01 | Plug, Harness Blanking, 2-Way, Sealed | 1 |
C1-26-1 Harness, Loader Lift, Suspension
| 70***52 | Cover, Actuator, Arm Suspension | 1 |
| 70***00 | Switch, 12v | 1 |
| 72***91 | Harness, Arm Suspension | 1 |
C1-12-1 Horn, Single Tone
| 12***99 | Bracket, Front Horn | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
C1-12-2 Horn, Installation, Rear
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***1Z | Nut, M8 | 1 |
| 14***7Z | Washer, Spring | 1 |
C1-15-1 Security System
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C1-9-1 Alarm, Reverse, Installation, Optional
| 12***04 | Bracket, Alarm Mount | 1 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-1-21 Harness, 2ws Machine Electric, Auto-Powershift 40kph Transmission
| 71***00 | Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Coloured Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way, Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Coloured Harness. | 1 |
| 71***00 | Diode, Gate Assembly, Double | 1 |
| 71***06 | Harness, Alternator | 1 |
C1-28-1 Earth Leads
| 14***1Z | Washer | 1 |
| 14***6Z | Washer, Spring | 1 |
| 71***05 | Strap, Braided Earth, 400mm Long | 2 |
C1-2-10 Battery 12v, Carrier + Isolator, Optional
| 10***00 | Clamp | 1 |
| 12***95 | Clip, Harness Support | 1 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 2 |
C1-5-1 Light, Working, Cab Front
| 14***07 | Screw | 4 |
| 70***03 | Spring | 2 |
| 70***00 | Light, Front Working | 2 |
C1-24-1 Electronic, Control Unit, Auto-Powershift 40kph Transmission
| 12***56 | Plate, Mounting | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
C1-1-61 Harness, Aws Machine Electric, Auto-Powershift 40kph Transmission
| 71***00 | Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Coloured Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way, Plug, Single Diode, 2 Way; Washer Bottle And Shutdown Motor. Used With Single Colour Harness., Plug, Single Diode, 2 Way; Wiper Motor. Used With Single Coloured Harness. | 1 |
| 71***06 | Harness, Alternator | 1 |
| 71***73 | Harness, Esos, Darwin Engine | 1 |
C1-20-2 Harness Connectors, Repair Ip67 Standard, Technical Information 2/174 (C45/N.Am.)
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C2-4-1 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-3-2 Alternator, 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
C2-1-1 Electrical Equipment, Ar Builds
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-1-2 Electrical Equipment, Ak Builds
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-3-1 Alternator, 72amp
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***08 | Bracket, Drive End | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C3-6-10 Switches, Lights, Heater & Wiper, 2ws
| 12***03 | Lock, Switch | 1 |
| 12***23 | Plate, Switch, 2ws/4wd | 1 |
| 70***00 | Switch, 3 Postion Selector | 1 |
C3-1-1 Gauges, Instrument Cluster, Side Consol
| 70***00 | Switch, Push Button, Hour 2 Cavities | 1 |
| 70***00 | Switch, Push Button, Minute 3 Cavities | 1 |
| 70***00 | Gauge, Tacho | 1 |
C3-4-30 Switch, Column, Auto-Powershift, 40kph Transmission
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
| 70***01 | Switch, Column, Light, Wiper | 1 |
C3-7-20 Fuse Box & Relays, Powershift Trans
| 12***47 | Plate, Fuse Mounting | 1 |
| 14***8Z | Washer, Lock, 5m Internal Teeth | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-13-10 No Vandal Cover
| 12***66 | Strip, Clamp | 1 |
| 12***67 | Plate, Clamp | 1 |
| 82***99 | Nut, Rivet,M6 Open Ended | 3 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-18-10 Interior Mouldings, Air Ducting, Air Conditioning
| 12***48 | Spacer | 1 |
| 12***60 | Cover, Left Hand Toolbox | 1 |
| 12***80 | Vent, Face, Left Hand | 1 |
C3-3-1 Covers, Instrument Surround, Heater Build
| 12***55 | Bracket, Cover Support | 1 |
| 12***90 | Bracket, Support, Left Hand | 1 |
| 12***14 | Bracket, Switch Cover Mount | 1 |
C3-2-10 Instrument Panel, Side Console, Cab Build
| 12***53 | Bracket, Air Recirc Flap | 1 |
| 12***65 | Cover, Fuse/Relays | 1 |
| 12***82 | Controller, Heater, C/W Cables & Clip | 1 |
C3-5-10 Heater, Installation
| 12***76 | Filter, Air Conditioner | 1 |
| 12***91 | Washer, Nylon | 2 |
| 12***50 | Adapter, Bulkhead | 2 |
C3-19-1 Air Conditioning, Installation
| 12***41 | Shim | 1 |
| 12***23 | Bracket, Accumulator Mounting | 1 |
| 12***43 | Accumulator; Replaced By 47***27, See San06209 | 1 |
C3-11-1 Radio, Optional
| 14***6Z | Washer, M6 | 1 |
| 24***01 | O Ring | 1 |
| 24***05 | Grommet | 1 |
C3-3-10 Covers, Instrument Surround, Heaterless M/C,S Build
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***55 | Bracket, Cover Support | 1 |
| 12***90 | Bracket, Support, Left Hand | 1 |
C3-22-1 Electric Rear Window
| 12***55 | Liner, Front Roof | 1 |
| 12***79 | Casting, Ramp Right Hand | 1 |
| 12***80 | Casting, Ramp Left Hand | 1 |
C3-1-11 Gauge, Warning Light, Cluster, Front Consol
| 70***13 | Bulb, 12v 1.7w | 12 |
| 70***00 | Cluster, Warning Light | 1 |
C3-14-1 Cigarette Lighter
| 12***83 | Ashtray | 1 |
| 12***48 | Mounting, Ashtray | 1 |
| 71***00 | Lighter, Cigar | 1 |
C3-5-2 Heater Assembly, Hi-Performance
| 12***61 | Housing, Upper | 1 |
| 12***66 | Seal, Rubber, 130mm Dia | 1 |
| 12***67 | Seal, Rubber, 85mm Dia | 1 |
C3-13-1 Cover, Vandal Proof, Instrument Panel
| 12***86 | Catch, Vandal Cover | 1 |
| 12***96 | Cover, Vadal; Replaced By 12***21, See San009536 | 1 |
| 12***36 | Bracket, Vandal Cover Lock | 1 |
C3-18-2 Interior Mouldings, Air Ducting, Deluxe Heater/Air Conditioning
| 12***48 | Spacer | 1 |
| 12***56 | Duct, Bulkhead | 1 |
| 12***60 | Cover, Left Hand Toolbox | 1 |
C3-9-10 Instalation, Beacon Light, Mounted On Excavator End
| 12***11 | Bracket, Beacon Mounting, Basic Dipper | 1 |
| 12***91 | Bracket, Beacon Light, Extradig Dipper; Replaced By 12***33, See San09490a | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
C3-9-1 Light, Beacon, Hazard Warning, Amber
| 12***01 | Plate, Beacon Mounting | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
C3-2-2 Instrument Panel, Side Console, Canopy Build, Heaterless Build.
| 12***53 | Bracket, Air Recirc Flap | 1 |
| 12***65 | Cover, Fuse/Relays | 1 |
| 12***82 | Controller, Heater, C/W Cables & Clip | 1 |
C3-4-10 Switch, Column, Powershift, Transmission
| 11***58 | Gaiter, Column Switch | 2 |
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
C3-18-3 Interior Mouldings, Heaterless Cab, Canopy/Cabless Build
| 12***60 | Cover, Left Hand Toolbox | 1 |
| 12***08 | Blank, Ashtray | 1 |
| 12***91 | Washer, Nylon | 2 |
C3-17-1 Fan, Face Level, Optional
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 33***46 | Fan, Face Level; Usa Part Only, Usa Sourced, Not Fitted At Jcb, Rocester, Alt Service Number 71***40 | 1 |
C3-5-20 Air Conditioning, Assembly
| 12***61 | Housing, Upper | 1 |
| 12***67 | Wheel, Blower | 1 |
| 12***32 | Housing, Lower | 1 |
C3-18-1 Interior Mouldings, Air Ducting, Basic Heater
| 12***56 | Duct, Bulkhead | 1 |
| 12***60 | Cover, Left Hand Toolbox | 1 |
| 12***74 | Vent, Air Ducting Flap | 1 |
C3-6-20 Switches, Lights, Heater & Wiper, Aws
| 12***03 | Lock, Switch | 1 |
| 12***24 | Plate, Switch, Aws Build | 1 |
| 70***00 | Switch, 3 Postion Selector | 1 |
C3-7-30 Fuse Box & Relays, Auto-Shift Trans
| 12***47 | Plate, Fuse Mounting | 1 |
| 14***8Z | Washer, Lock, 5m Internal Teeth | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-1-2 Gauges, Instrument Cluster, Side Consol
| 70***19 | Cap | 1 |
| 70***20 | Cap | 3 |
| 70***00 | Gauge, Fuel | 1 |
C3-8-1 Motor, Wiper
| 14***1Z | Washer, 2 Ba | 2 |
| 14***02 | Screw | 1 |
| 15***03 | Cover | 1 |
C3-7-50 Fuse Box & Relays, Servo Additions
| 13***8Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
D Controls-Machine, Engine & Steering
D1-20-6 Controls, Brake Pedal, Fixed Steering Column
| 12***01 | Plate, Lock | 1 |
| 12***30 | Spacer | 1 |
| 12***77 | Pivot; Replaced By 91***40, See San05567 | 2 |
D1-21-2 Control, Parking Brake
| 12***73 | Gaiter, Hand Brake | 1 |
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***53 | Lever, Parking Brake, Red Grip | 1 |
D1-4-1 Control, Shovel Reset
| 12***02 | Bracket, Saddle | 3 |
| 12***42 | Bar | 1 |
| 12***28 | Bracket, Reset Switch | 1 |
D1-6-10 Controls, Lever, In Cab Boom Lock, 15'6 & 17'0 Centremount
| 12***34 | Lever, Boomlock, Red Grip | 1 |
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
D1-20-5 Controls, Brake Pedal
| 12***01 | Plate, Lock | 1 |
| 12***16 | Lever | 1 |
| 12***77 | Pivot; Replaced By 91***40, See San05567 | 2 |
D1-6-1 Controls, Lever, In Cab Boom Lock, 14'0 Centremount
| 12***34 | Lever, Boomlock, Red Grip | 1 |
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
D1-21-3 Control, Parking Brake
| 12***73 | Gaiter, Hand Brake | 1 |
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***53 | Lever, Parking Brake, Red Grip | 1 |
D1-4-2 Control, Shovel Reset
| 13***2Z | Nut, Thin M20 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
D2-1-3 Controls, Throttle & Stop
| 12***57 | Gaiter | 1 |
| 12***57 | Pivot, Cable | 1 |
| 12***58 | Bracket, Throttle Reaction | 1 |
D2-1-4 Controls, Throttle & Stop, Autoshift
| 12***57 | Gaiter | 1 |
| 12***57 | Pivot, Cable | 1 |
| 12***58 | Bracket, Throttle Reaction | 1 |
D3-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***52 | Plate, Retainer | 1 |
D3-1-2 Steering Column, Fixed
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***52 | Plate, Retainer | 1 |
E Hydraulics & Air Including, Steering
E1-9-2 Circuit, Dipper Ram, 1550, 1700
| 12***36 | Clamp | 2 |
| 12***46 | Plate, Clamp Stiffener | 1 |
| 13***4Z | Bolt | 2 |
E1-18-11 Cooler, Hydraulic, & Transmission 5 Row, Fitted To All European 100hp Builds
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***06 | Adapter, & Clip Assembly | 2 |
| 12***92 | Radiator, & Cooler Assembly | 1 |
E1-10-20 Circuit, Bucket Ram, Knuckle Dipper
| 13***4Z | Nut | 6 |
| 61***00 | Hose; Steer Pump To Fan Motor. 525-58, 525-67, 530-110, 530-95 505-19, 505-22, 506-36, Hose | 4 |
| 61***03 | Hose; Replaced By 61***00, See San09658 | 1 |
E1-11-2 Circuit, Auxiliary, Extention Ram, Extradig Dipper 1550
| 12***00 | Cluster, Pipe, Bucket Auxiliary | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***4Z | Nut | 2 |
E1-6-1 Circuit, Slew/Swing
| 14***11 | Seal, Bonded | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
| 16***02 | Adapter | 2 |
E1-1-20 Circuit, Neutral, Basic Build+ Breaker, (3/4"Bsp Pipes)
| 12***91 | Pipe, 2ws Oil Cooler; Replaced By 12***65, See San09822 | 1 |
| 12***92 | Pipe, Aws Oil Cooler Feed; Replaced By 12***66, See San09822 | 1 |
| 12***24 | Valve, Dual Check | 1 |
E1-27-20 Boom Ram Pipework, None H.B.P Valve
| 65***63 | Pipe, Boom Ram; Replaced By 83***16, See San 13611 | 1 |
E1-1-50 Circuit, Servo, Mainframe Pilot
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 3 |
| 61***00 | Hose, 1/4"Bsp X 740mm; See Note 1. Replaced 61***00 Because It'S 90mm Longer And Improved Hose Run.Fit As Matching Pair, Hose, 1/4"Bsp X 740mm | 1 |
| 61***00 | Hose, 1/4bspx1270 | 3 |
E1-1-10 Circuit, Neutral, Basic Build, (5/8" Bsp Pipes)
| 12***91 | Pipe, 2ws Oil Cooler; Replaced By 12***65, See San09822 | 1 |
| 12***24 | Valve, Dual Check | 1 |
| 12***26 | Pipe, Return, Centremount | 1 |
E1-10-10 Circuit, Bucket Ram, Extradig Dipper, 1400
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
| 12***00 | Cluster, Pipe, Bucket, Auxiliary | 1 |
E1-2-1 Circuit, Loader Arm
| 12***19 | Pipe, Cluster, Loader Valve | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
E1-2-20 Circuit, Loader Arm, Lift Ram, Hose Burst Protection
| 12***12 | Bracket, Valve Mounting | 1 |
| 12***13 | Pipe, Link, Right Hand, Lift Ram | 1 |
| 12***14 | Bracket, Valve Mounting | 1 |
E1-27-2 Circuit, H.B.P Valve, Boom Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***38 | Bracket, Valve Mounting, 150mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
E1-26-2 Circuit, H.B.P Valve, Dipper Ram
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-27-21 Boom Ram Pipework, None H.B.P Valve
| 12***75 | Clamp, Pipe Support | 1 |
| 22***10 | Clip, Jubilee | 1 |
| 65***50 | Pipe, Boom Ram Dump End | 1 |
E1-0-3 O Rings, Air Conditioning, System
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-10-2 Circuit, Bucket Ram, Mono Dipper, 1550
| 12***00 | Pipe | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***4Z | Nut | 2 |
E1-11-4 Circuit, Auxiliary, Extention Ram, Extradig Dipper 1400
| 12***36 | Clamp | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***4Z | Nut | 2 |
E1-8-1 Circuit, Boom Ram, 1400
| 13***4Z | Nut | 1 |
| 13***5Z | Nut | 1 |
| 61***00 | Hose | 1 |
E1-10-13 Circuit, Bucket Ram, Extradig Dipper, 1400
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
| 12***36 | Clamp | 1 |
E1-16-2 Circuit, Auxiliary, Hand Held Tools, Vary Flow Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***1Z | Bolt | 2 |
E1-3-1 Circuit, Auxiliary, Loader
| 12***02 | Pipe, Loader Arm Auxiliary, Left Hand | 1 |
| 12***03 | Pipe, Loader Arm Auxiliary, Right Hand | 1 |
| 12***20 | Pipe, Auxiliary, Right Hand | 1 |
E1-30-1 Circuit, Breaker, Changeover Valve
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 16***04 | Adapter, Male/Male | 6 |
| 25***00 | Valve, Change Over; Replaced By Mss Use 92***20 + 16***06 X2,, 81***16 X1. See San 12991 Pi A01/005 | 2 |
E1-27-1 Circuit, H.B.P Valve, Boom Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***38 | Bracket, Valve Mounting, 150mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
E1-8-2 Circuit, Boom Ram, 1550, 1700
| 13***4Z | Nut | 1 |
| 13***5Z | Nut | 1 |
| 61***09 | Hose, 1/2"Bsp X 850mm | 1 |
E1-10-1 Circuit, Bucket Ram, Mono Dipper, 1400
| 12***56 | Spacer, Steel | 2 |
| 12***00 | Pipe | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
E1-1-31 Circuit, Auxiliary, Low Flow, Single & Double Valve
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 13***4Z | Nut | 2 |
E1-10-4 Circuit, Bucket Ram, Mono Dipper, 1400
| 12***36 | Clamp | 1 |
| 12***56 | Spacer, Steel | 2 |
| 13***4Z | Bolt | 1 |
E1-10-11 Circuit, Bucket Ram, Extradig Dipper, 1550
| 12***11 | Pipe, Extradig Dipper, Right Hand | 1 |
| 12***12 | Pipe, Exradig Dipper, Left Hand | 1 |
| 12***00 | Cluster, Pipe, Bucket Auxiliary | 1 |
E1-1-40 Circuit, Servo, Seat To Valve
| 14***11 | Seal, Bonded | 12 |
| 16***02 | Adapter, 1/4" Bsp M/M | 12 |
| 33***84 | Sleeve | 2 |
E1-9-1 Circuit, Dipper Ram, 1400
| 12***36 | Clamp | 2 |
| 12***46 | Plate, Clamp Stiffener | 1 |
| 13***4Z | Bolt | 2 |
E1-5-20 Circuit, Steering, Aws
| 12***34 | Adapter, Bulkhead | 1 |
| 12***66 | Pipe, Steering & Trans, Aws | 1 |
| 13***8Z | Screw, M8x30 | 1 |
E1-3-4 Circuit, Auxiliary, Loader, 2ws (5/8" Bsp Pipwork)
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Bolt, M8 X 55 | 2 |
E1-18-10 Cooler, Hydraulic, Transmission, Blue Spot 92hp Ak Build
| 12***06 | Shield, Heat | 2 |
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
E1-7-10 Circuit, Stabiliser, Centremount
| 13***8Z | Screw, M8x30 | 4 |
| 14***11 | Seal, Bonded | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-1-60 Circuit, Servo Pilot, Auxiliary, Single & Double Valve
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 3 |
| 61***00 | Hose, Straight-Elbow | 1 |
| 61***00 | Hose, 1/4bsp X 1100mm | 1 |
E1-26-1 Circuit, H.B.P Valve, Dipper Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
E1-4-1 Circuit, Transmission, 2ws
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 6 |
E1-3-2 Circuit, Auxiliary, Loader
| 12***99 | Pipe, Loader Arm Auxiliary, Left Hand | 1 |
| 12***01 | Pipe, Loader Arm Auxiliary, Right Hand | 1 |
| 12***20 | Pipe, Auxiliary, Right Hand | 1 |
E1-4-10 Circuit, Transmission, Aws
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 6 |
E1-34-1 Circuit, Loader Lift, Suspension, Use With Gear Pump
| 12***48 | Bracket, Valve Mounting | 1 |
| 12***49 | Bracket, Accumulator Mounting | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
E1-12-1 Circuit, Knuckle Ram
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Nut | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-11-1 Circuit, Auxiliary, Extention Ram, Extradig Dipper 1400
| 12***00 | Cluster, Pipe, Bucket, Auxiliary | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***4Z | Nut | 2 |
E1-1-30 Circuit, Neutral, Auxiliary Lowflow
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose | 2 |
E1-16-1 Circuit, Auxiliary, Hand Held Tools, Vary Flow Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***1Z | Bolt | 2 |
E1-5-10 Circuit, Steering, 2ws 4wd
| 12***65 | Pipe, Steering & Trans, 2ws/4wd | 1 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
E1-16-10 Circuit, Auxiliary, Hand Held Tools, Gear Pump
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 12***80 | Bracket, Packhard Retaining | 1 |
| 13***8Z | Screw, M8x30 | 2 |
E2-1-3 Pump, Main Hydraulic, Code 7441
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***3Z | Nut, M12 | 2 |
E2-1-5 Pump, Main Hydraulic, Code 8282
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***3Z | Nut, M12 | 2 |
E2-4-10 Shaft, Pump Drive, Aws
| 12***57 | Spacer | 1 |
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***04 | Screw, Grub | 1 |
E2-1-4 Pump, Main Hydraulic, Code 4071
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***3Z | Nut, M12 | 2 |
E2-1-1 Pump, Main Hydraulic, Code 4070
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***3Z | Nut, M12 | 2 |
E2-4-1 Shaft, Pump Drive, 2ws
| 12***57 | Spacer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***04 | Screw, Grub | 1 |
E2-1-6 Pump, Main Hydraulic, Code 831
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***3Z | Nut, M12 | 2 |
E3-6-9 Valve, Relief, Dipper Head Side, Boom Head Side, Bucket & Slew
| 25***01 | Plug | 1 |
| 25***00 | Valve, Relief, 4500 Psi | 1 |
| 25***01 | Kit-Seal; Replaced By 25/62***06, See San 10352 | 2 |
E3-2-2 Valve, Auxiliary, 2 Spool
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
E3-10-20 Valve, Steering, Aws
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***03 | O Ring | 1 |
E3-2-1 Valve, Auxiliary, 1 Spool
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***07 | Adapter | 1 |
E3-1-60 Valve, Unloader, 2,3 Loader Valve
| 25***44 | Nut, Coil Retainer | 1 |
| 25***16 | O Ring | 1 |
| 25***17 | Spring | 1 |
E3-6-8 Valve, Relief, Dipper Rod Side, Boom Rod Side
| 25***01 | Kit-Seal; Replaced By 25/62***06, See San 10352 | 1 |
| 25***00 | Valve, Relief, 3600 Psi, Valve, Relief, 3600 Psi; Breaker M/C'S Only. Bucket. This Arv Is Fitted In Place Of Bucket Arv Blanking Plug. | 1 |
| 25***06 | Kit-Seal, With Locking O Ring; Cwe By 25/22***05 See San 20222 - Tech Service, To Issue A Ti | 1 |
E3-1-50 Valve, Spool, Soleniod Pilot, Loader Valve
| 25***99 | Seat, Spring | 1 |
| 25***00 | Spring | 1 |
| 25***01 | Bolt, Spool End | 1 |
E3-6-1 Plugs, Excavator Valve, Centremount
| 24***03 | O Ring | 1 |
| 25***16 | O Ring | 1 |
| 25***23 | Plug, Assembly | 1 |
E3-11-10 Valve, Steering Mode, With No Crab
| 12***80 | Block | 1 |
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 13***20 | Capscrew | 2 |
E3-8-1 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, Fuel Filter, Canister Type | 1 |
E3-1-20 Valve, Loader, 3 Spool, With Float & Reset, Gear Pump
| 12***62 | Adapter, C/W Filter, 5/8"Bsp X 1 1/16"Unf | 1 |
| 12***63 | Adapter, C/W Filter, 3/4"Bsp X 1 1/16"Unf; Superseded By 81***08 (San20134 6/01/04) | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-10-1 Valve, Steering, 2ws, 200 Load Sensing
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***03 | O Ring | 1 |
E3-17-1 Valve, Soleniod, Jaw Bucket/Extradig, Dipper
| 12***80 | Bracket, Packhard Retaining | 2 |
| 12***17 | Harness, Soleniod | 2 |
| 12***23 | Cover | 1 |
E3-6-10 Valve, Excavator, Centremount
| 25***96 | Valve, 6 Spool Excavator, Servo; Replaced By 25/22***70, See San 12680 | 1 |
| 25***96 | Cap | 4 |
| 25***97 | Cap | 4 |
E3-9-1 Valve, Priority
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 16***07 | Adapter | 1 |
| 24***06 | O Ring | 1 |
E3-3-1 Valve, Hand Control, Servo
| 25***98 | Valve, Pilot Control, Left Hand; Replaced By 25/22***01, See San 12568 | 1 |
| 25***99 | Valve, Pilot Control, Right Hand; Replaced By 25/22***01, See San 12755 | 1 |
| 25***77 | Valve, Flow Control, Rh Servo Joystick; Replaced By 25/22***02, See San 12568 | 1 |
E3-1-10 Valve, Loader, 2 Spool, With Float & Reset
| 12***62 | Adapter, C/W Filter, 5/8"Bsp X 1 1/16"Unf | 1 |
| 12***63 | Adapter, C/W Filter, 3/4"Bsp X 1 1/16"Unf; Superseded By 81***08 (San20134 6/01/04) | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-1-31 Valve, Loader, 3 Spool, With Float & Aux Reset, Gear Pump
| 12***62 | Adapter, C/W Filter, 5/8"Bsp X 1 1/16"Unf | 1 |
| 12***63 | Adapter, C/W Filter, 3/4"Bsp X 1 1/16"Unf; Superseded By 81***08 (San20134 6/01/04) | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-5-11 Valve Adapters, Excavator, 1550, 1700
| 12***63 | Adapter, C/W Filter, 3/4"Bsp X 1 1/16"Unf; Superseded By 81***08 (San20134 6/01/04) | 1 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 4 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
E3-5-10 Valve Adapters, Excavator, 1400
| 12***63 | Adapter, C/W Filter, 3/4"Bsp X 1 1/16"Unf; Superseded By 81***08 (San20134 6/01/04) | 1 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 4 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
E3-7-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 27***00 | Filter, Hydraulic, Assembly, 10 Micron | 1 |
| 32***00 | Element, Hydraulic Filter, 10 Micron; San 22618.Cwe To 32/92***46.Ref Pi A01/187, P Guest/M Mcarthy. P Gamble 20/09***06 | 1 |
E3-5-12 Valve Adapters, Excavator, Knuckle
| 12***63 | Adapter, C/W Filter, 3/4"Bsp X 1 1/16"Unf; Superseded By 81***08 (San20134 6/01/04) | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***07 | Adapter | 4 |
E3-2-20 Valve, Section, Auxiliary Valve
| 25***02 | Solenoid, Assembly | 2 |
| 25***03 | Cartridge, Solenoid | 1 |
| 25***06 | Section, Auxiliary Valve | 1 |
E3-1-40 Valve, Spool, Standard, Loader Valve
| 25***99 | Seat, Spring | 1 |
| 25***00 | Spring | 1 |
| 25***01 | Bolt, Spool End | 1 |
E3-2-35 Valve, Auxiliary Relief, 2 Sool Loader Valve
| 25***32 | Valve, Relief | 4 |
| 25***06 | Valve, Relief | 1 |
| 25***32 | Kit-Repair | 1 |
E3-1-65 Valve, Auxiliary Relief, Load Hold Check, 2,3 Loader Valve
| 25***11 | Cap | 3 |
| 25***12 | O Ring | 3 |
| 25***13 | Spring | 1 |
E3-1-55 Valve, Main Relief, 2,3 Loader Valve
| 25***01 | Valve, Relief | 1 |
| 25***02 | Kit-Repair, Relief Valve | 1 |
E3-11-1 Valve, Steering Mode
| 12***21 | Block | 1 |
| 13***8Z | Capscrew, M5 X 30mm | 8 |
| 13***20 | Capscrew | 2 |
E3-1-45 Valve, Spool, Float Pilot, Loader Valve
| 25***99 | Seat, Spring | 1 |
| 25***18 | Cap | 1 |
| 25***19 | Spool, End | 1 |
E3-18-1 Valve Manifold
| 12***20 | Manifold, Assembly, Servo Pilot | 1 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 19 |
| 25***00 | Manifold, Assembly Servo Build; Replaced By 12***20 | 1 |
E4-1-1 Ram, Lift, Standard
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***95 | Pipe, Ram Feed | 1 |
E4-7-2 Ram, Bucket, Mono Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***74 | Ram, Bucket, Mono Dipper; Replaced By 55***45, See San 12827 | 1 |
E4-13-11 Seal Kit, Shovel Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-5-20 Ram, Boom, Standard Lift, 110mm Cyl X 60mm Rod
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 56***63 | Ram, Boom Hbcv (Yellow), 110mm Cyl X 60mm Rod; Replaced By 56***89 + 24***12, See San09952 | 1 |
| 56***87 | Ram, Boom, In Black; Replaced By 56***90 + 24***12, See San09952 | 1 |
E4-13-19 Seal Kit, Boom Ram,, 120mm Cyl X 65mm Rod
| 23***07 | O Ring | 1 |
| 23***16 | O Ring, 110mm Id X 5.0mm | 1 |
| 24***09 | Seal, Gland, 65mm Rod | 1 |
E4-3-10 Ram, Steering, Aws
| 14***2Z | Washer, M20 | 4 |
| 23***10 | O Ring | 2 |
| 24***26 | Seal, 50 X 60 X 8.0 | 2 |
E4-8-1 Ram, Extension, Extradig Dipper
| 22***16 | Clip, Jubilee | 1 |
| 55***01 | Gland, Bearing | 1 |
| 55***57 | Ram, Extension, 45mm Hole, Extradig Dipper; Replaced By 55***33, See San 12827 | 1 |
E4-13-14 Seal Kit, Dipper Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***14 | O Ring | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-5-60 Ram, Boom, Heavy Lift, 140mm Cyl X 75mm Rod
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 56***04 | Ram, Boom, 75mm Rod X 140mm Cyl; Replaced By 56***30, See San 12828 | 1 |
| 56***04 | Cylinder, Boom Ram, 140mm Id | 1 |
E4-1-10 Ram, Lift, Standard
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-7-3 Ram, Bucket, Mono Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***31 | Ram, Bucket, Mono Dipper, 60mm Rod X 90mm Cyl; Replaced By 55***61, See San 12827 | 1 |
E4-13-18 Seal Kit, Stabiliser, Ram, Centremount
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-7-11 Ram, Bucket
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***24 | Ram, Bucket, 60mm Rod X 100mm Cyl; Replaced By 55***42, See San 12827 | 1 |
E4-14-1 Ram, Jaw Bucket
| 12***15 | Bush | 1 |
| 12***22 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-11-10 Ram, Slew/Swing, Centremount
| 14***15 | Washer, Seal; Replaces Khj0891 | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***02 | Adapter | 1 |
E4-14-10 Seal Kit, Ram, Jaw Bucket, 2" Rod X 4.0" Cyl
| 21***16 | Pin, Split | 1 |
| 24***26 | O Ring, 4.00in | 1 |
| 24***18 | O Ring, 4.00in | 1 |
E4-13-16 Seal Kit, Knuckle Bo, Om Ram
| 23***08 | O Ring | 1 |
| 23***18 | O Ring, 120mm I.D. X 5mm Xs | 1 |
| 24***10 | Seal, 70 X 85 X 11.6 | 1 |
E4-13-18 Seal Kit, Dipper Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-15-1 Ram, Quickhitch
| 53***00 | Ram, Complete, (1/4 Bsp Ports) | 1 |
| 53***01 | Cylinder, (1/4 Bsp Ports) | 1 |
| 53***02 | Cap, End | 1 |
E4-7-12 Ram, Bucket, Extradig Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***30 | Ram, Bucket, 60mm Rod X 90mm Cyl; Replaced By 55***60, See San 12827 | 1 |
E4-12-1 Ram, Knuckle
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***28 | Ram, Knuckle | 1 |
| 55***28 | Cylinder, Knuckle Ram | 1 |
E4-6-30 Ram, Dipper, Heavy Lift, 110mm Cyl X 60mm Rod. Use With Hbcv
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-11-20 Ram, Slew/Swing, Centremount
| 14***15 | Washer, Seal; Replaces Khj0891 | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***02 | Adapter | 1 |
E4-4-1 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 12***27 | Pipe | 1 |
E4-6-20 Ram, Dipper, Standard Lift, 100mm Cyl X 60mm Rod.
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-13-12 Seal Kit, Lift Ram
| 23***55 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***06 | Seal, 50mm Rod | 1 |
E4-6-40 Ram, Dipper, Knuckle Build, 100mm Cyl X 60mm Rod.
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-3-2 Ram, Steering, 4wd
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
E4-5-50 Ram, Boom, Knuckle Build, 130mm Cyl X 70mm Rod
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 56***28 | Ram, Boom; Replaced By 56***50, See San 12828 | 1 |
| 56***21 | Cylinder, Boom Ram, 130mm Id; Replaced By 56***28 + 24***12 | 1 |
E4-13-11 Seal Kit, Clam Shove, L Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-5-30 Ram, Boom, Heavy Lift, 120mm Cyl X 65mm Rod Use With Hbcv
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 56***29 | Ram, Boom Hbcv (Yellow), 120mm Cyl X 65mm Rod; Replaced By 56***39 + 24***12, See San09952 | 1 |
| 56***38 | Ram, Boom, In Black; Replaced By 56***40 + 24***12, See San09953 | 1 |
E4-13-13 Seal Kit, Lift Ram
| 23***55 | O Ring | 1 |
| 23***10 | O Ring | 1 |
| 24***06 | Seal, 50mm Rod | 1 |
E4-10-1 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-13-18 Seal Kit, Bucket Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-2-2 Ram, Shovel
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-13-11 Seal Kit, Extension, Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-6-50 Ram, Dipper, Knuckle Build, 100mm Cyl X 60mm Rod. Use With Hbcv
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
F Axles, Wheels & Transmission
F1-12-21 Hub & Components Aws, Steering Axle, 453/32210
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-11-11 Knuckle, Aws, Steering Axle, 453/31620
| 13***09 | Screw | 8 |
| 41***02 | Sealant, Locking | 4 |
| 45***04 | Trunnion; Replaced By 44***02, See San 08684 | 4 |
F1-2-20 Hub & Components 2ws, 4wd Steering Axle, 30kph, 40kph 448/43000
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-2-1 Axle Assembly, 2ws, 4wd Steering, 30kph & 40kph. 448/43000
| 12***18 | Stop, Lock, 45mm Long | 2 |
| 12***38 | Stop, Lock, 35mm Long | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-11-1 Axle Assembly, Aws, Steering, Maxtrac Diff 453/31620
| 12***25 | Stop, 8mm | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***82 | Circlip | 2 |
F1-1-20 Hub & Components 2ws, 4wd Steering Axle, 35kph 448/42400
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-2-30 Differential, 2ws, 4wd Steering Axle, 30kph, 40kph 448/43000
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-11-21 Hub & Components Aws, Steering Axle, 453/31620
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-11-30 Differential, Aws, Steering Axle, 453/31620 Maxtrac Diff
| 13***8Z | Bolt, M10x80 | 8 |
| 44***05 | Spacer, Collapsible | 1 |
| 45***03 | Nut, Side Differential | 2 |
F1-30-10 Power Trackrod, 2ws, 4wd
| 12***89 | Gaiter | 2 |
| 12***55 | Gaiter | 2 |
| 12***53 | Link, Trackrod, M24/M22 | 2 |
F1-12-40 Differential, Aws, Components, 453/32210 C/W L.S.D.
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-12-30 Differential, Aws, Steering Axle, 453/32210 L.S.D.
| 44***05 | Spacer, Collapsible | 1 |
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***00 | Yoke | 1 |
F1-2-10 Knuckle, 2ws, 4wd Steering Axle, 30kph, 40kph 448/43000
| 13***09 | Screw | 16 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
| 44***02 | Joint, Knuckle Swivel | 1 |
F1-12-1 Axle Assembly, Aws, Steering, L.S.D. 453/32210
| 12***25 | Stop, 8mm | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***82 | Circlip | 2 |
F1-1-10 Knuckle, 2ws, 4wd Steering Axle, 35kph 448/42400
| 13***09 | Screw | 16 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
| 44***02 | Joint, Knuckle Swivel | 1 |
F1-30-20 Power Trackrod, Aws Front
| 12***73 | Disc, Sensor | 1 |
| 12***09 | Cover, Front Sensor | 1 |
| 12***10 | Bracket, Front Sensor | 1 |
F1-3-1 Axle Pivot Pin, & Greasing, 2ws, 2wd/4wd
| 12***23 | Adhesive, Washer | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***3Z | Nut, M12 | 1 |
F1-12-11 Knuckle, Aws, Steering Axle, 453/32210
| 13***09 | Screw | 8 |
| 41***02 | Sealant, Locking | 4 |
| 45***04 | Trunnion; Replaced By 44***02, See San 08684 | 4 |
F1-1-30 Differential, 2ws, 4wd Steering Axle, 35kph 448/42400
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-1-1 Axle Assembly, 2ws, 4wd Steering, 35kph. 448/42400
| 12***18 | Stop, Lock, 45mm Long | 2 |
| 12***38 | Stop, Lock, 35mm Long | 2 |
| 12***19 | Stop, Axle Lock, 15mm | 2 |
F1-3-10 Axle Pivot Pin, & Greasing, Aws
| 12***23 | Adhesive, Washer | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***3Z | Nut, M12 | 1 |
F2-16-31 Differential Aws, Assembly, 13.7 : 1, 40kph 453/33320
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-1-1 Axle Assembly 2ws, Rear Drive 15.78 : 1, 35kph 450/36700, 450/43840
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-16-30 Differential Aws, Assembly, 13.7 : 1, 40kph 453/31200
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-16-40 Crown Wheel & Pinion, Aws, 13.7 : 1, 40kph 453/31200, 453/33320 L.S.D.
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, 13t/33t; Replaced By 45***40, See San 10572 | 1 |
| 45***60 | Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***38 & 45***24. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***08 & 45***47. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***51 & 45***34. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***51 * 45***34. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***39 & 45***52. See Ti Gen209, Gear, Crown Wheel & Pinion, 13t/33t (Green); See Ti Gen 209, M24 Thread Used In 45***08 & 15***47. See Ti Gen209 | 1 |
F2-1-20 Crown Wheel & Pinion, 2ws, 15.78 : 1, 35kph 450/36700, 450/43840
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Casing, Assembly, Differential | 1 |
F2-13-30 Differential Aws, Assembly, 13.7 : 1, 40kph 453/31190
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-2-1 Axle Assembly 2ws, Rear Drive 18.16 : 1, 30kph 450/36900, 450/43850
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-15-40 Crown Wheel & Pinion, Aws, 18/16 : 1, 30kph 453/32200, 453/33500 L.S.D.
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, 11t/37t; Replaced By 45***35, See San 10680 | 1 |
| 45***35 | Gear, Crown Wheel & Pinion, 11t/37t See Ti Gen209; San 22279.Nla.3/6.Rei S 19/9/6,San 226, 9/06.San 22984 Ss To Nla See Gen 209 | 1 |
F2-12-40 Crown Wheel & Pinion, Aws, 18/16 : 1, 30kph 453/31600, 453/33480 Maxtrac
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-3-11 Differential 2ws, Assembly, 15.78 : 1, 35kph C/W L.S.D. 450/43860
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***12 | Multigasket | 0 |
F2-14-40 Crown Wheel & Pinion, Aws, 15.78 : 1, 35kph 453/31800, 453/33490 C/W L.S.D.
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Differential, Assembly, Lsd | 1 |
| 82***80 | Bolt | 12 |
F2-5-11 Differential 2ws, Assembly, 13.7 : 1, 40kph 450/43970
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-15-61 Brakes, Axle, 453/33500, 453/33610
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-13-1 Axle Assembly Aws, Rear Drive 13.7 : 1, 40kph 453/31190 Maxtrac Diff
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-5-20 Crown Wheel & Pinion, 2ws, 13.7 : 1, 40kph 450/43220, 450/43970
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-14-61 Brakes, Axle, 453/33490
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-4-30 Brakes, Axle, 450/37100
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-15-31 Differential Aws, Assembly, 18.16 : 1, 30kph 453/33500, 453/33610 C/W L.S.D.
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-11-60 Brakes, Axle, 453/31600
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-3-20 Crown Wheel & Pinion, 2ws, 15.78 : 1, 35kph, C/W L.S.D. 450/37000, 450/43860
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***10 | Differential, Lsd Assembly, 3 Working Faces | 1 |
| 45***37 | Gear, Crown Wheel & Pinion, 13t/38t See Gen209; San 22279.S/S Nla..P G 20/03/06.San 22429, Pi 450/316.See Ti' Gen 209 | 1 |
F2-12-61 Brakes, Axle, 453/33480
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-16-21 Hub & Components Aws, Rear Axle, 453/31200, 453/33320
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-1-11 Differential 2ws, Assembly, 15.78 : 1, 35kph 450/43840
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-1-30 Brakes, Axle, 450/36700
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-4-40 Differential 2ws, Components, L.S.D. 450/37100, 450/43870
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-15-60 Brakes, Axle, 453/32200, 453/33200
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-12-11 Knuckle, Steering, Aws Rear Axle, 453/31610, 453/33480 C/W Maxtrac
| 13***9Z | Bolt | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-14-30 Differential Aws, Assembly, 15.78 : 1, 35kph 453/31800 C/W L.S.D.
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-13-40 Crown Wheel & Pinion, Aws, 13.7 : 1, 40kph 453/31190, 453/33310 Maxtrac
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-5-1 Axle Assembly 2ws, Rear Drive 13.7 : 1, 40kph 450/43220, 450/43970
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-16-60 Brakes, Axle, 453/31200
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-15-1 Axle Assembly Aws, Rear Drive 18.16 : 1, 30kph C/W L.S.D. 453/32200, 453/33500
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-16-50 Differential Aws, Components, L.S.D. 453/31200, 453/33320
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-13-21 Hub & Components Aws, Rear Axle, 453/31190, 453/33550
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-12-30 Differential Aws, Assembly, 18.16 : 1, 30kph 453/31610
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-2-20 Crown Wheel & Pinion, 2ws, 18.16 : 1, 30kph, 450/36900, 450/43850
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-11-1 Axle Assembly Aws, Rear Drive 15.78 : 1, 35kph 453/31600 Maxtrac Diff
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-15-21 Hub & Components Aws, Rear Axle, 453/32200, 453/33500
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-4-1 Axle Assembly 2ws, Rear Drive 18.16 : 1, 30kph C/W L.S.D 450/37100
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-11-61 Brakes, Axle, 453/33470, 453/33580
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-5-31 Brakes, Axle, 450/43970
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-15-30 Differential Aws, Assembly, 18.16 : 1, 30kph 453/32200 C/W L.S.D.
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-4-31 Brakes, Axle, 450/43870
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-12-60 Brakes, Axle, 453/31610
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-30-1 Power Trackrod, Aws Rear Axle
| 12***73 | Disc, Sensor | 1 |
| 12***11 | Cover, Rear Sensor | 1 |
| 12***12 | Bracket, Rear Sensor | 1 |
F2-5-10 Differential 2ws, Assembly, 13.7 : 1, 40kph 450/43220
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-16-11 Knuckle, Steering, Aws Rear Axle, 453/31200, 453/33320 C/W L.S.D.
| 13***9Z | Bolt | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-6-11 Differential 2ws, Assembly, 13.7 : 1, 40kph C/W L.S.D. 450/43960
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-6-30 Brakes, Axle, 450/43210
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-16-1 Axle Assembly Aws, Rear Drive 13.7 : 1, 40kph C/W L.S.D. 453/31200, 453/33320
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-4-20 Crown Wheel & Pinion, 2ws, 18.16 : 1, 30kph, C/W L.S.D. 450/37100, 450/43870
| 45***10 | Differential, Lsd Assembly, 3 Working Faces | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, 11t/37t; Replaced By 45***35, See San 10680 | 1 |
| 45***35 | Gear, Crown Wheel & Pinion, 11t/37t See Ti Gen209; San 22279.Nla.3/6.Rei S 19/9/6,San 226, 9/06.San 22984 Ss To Nla See Gen 209 | 1 |
F2-1-31 Brakes, Axle, 450/43840
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-1-10 Differential 2ws, Assembly, 15.78 : 1, 35kph 450/36700
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-14-1 Axle Assembly Aws, Rear Drive 15.78 : 1, 35kph C/W L.S.D. 453/31800
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-6-10 Differential 2ws, Assembly, 13.7 : 1, 40kph C/W L.S.D. 450/43210
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-3-10 Differential 2ws, Assembly, 15.78 : 1, 35kph C/W L.S.D. 450/37000
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***02 | Gasket, High Strength, 50ml | 0 |
F2-6-20 Crown Wheel & Pinion, 2ws, 13.7 : 1, 40kph, C/W L.S.D. 450/43210, 450/43960
| 45***10 | Differential, Lsd Assembly, 3 Working Faces | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, 13t/33t; Replaced By 45***40, See San 10572 | 1 |
| 45***40 | Gear, Crown Wheel & Pinion, 13t/33t; Replaced By 45***60, See San 10681 | 1 |
F2-3-30 Brakes, Axle, 450/37000
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-6-1 Axle Assembly 2ws, Rear Drive 13.7 : 1, 40kph C/W L.S.D 450/43210, 450/43960
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-15-11 Knuckle, Steering, Aws Rear Axle, 453/32200, 453/33500 C/W L.S.D.
| 13***9Z | Bolt | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-14-60 Brakes, Axle, 453/31800
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-11-40 Crown Wheel & Pinion, Aws 15.78 : 1, 35kph 453/31600, 453/33470 Maxtrac
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Casing, Assembly, Differential | 1 |
F2-12-1 Axle Assembly Aws, Rear Drive 18.16 : 1, 30kph 453/31610, 453/33480 Maxtrac Diff
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-2-30 Brakes, Axle, 450/36900
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-16-61 Brakes, Axle, 453/33320, 453/33600
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-13-31 Differential Aws, Assembly, 13.7 : 1, 40kph 453/33310
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-11-11 Knuckle, Steering, Aws Rear Axle, 453/31600, 453/33470 C/W Maxtrac
| 13***9Z | Bolt | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-13-60 Brakes, Axle, 453/31190
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-2-31 Brakes, Axle, 450/43850
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-4-11 Differential 2ws, Assembly, 18.16 : 1, 30kph C/W L.S.D. 450/43870
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***12 | Multigasket | 0 |
F2-11-30 Differential Aws, Assembly, 15.78 : 1, 35kph 453/31600
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-5-30 Brakes, Axle, 450/43220
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-4-10 Differential 2ws, Assembly, 18.16 : 1, 30kph C/W L.S.D. 450/37100
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***02 | Gasket, High Strength, 50ml | 0 |
F2-2-11 Differential 2ws, Assembly, 18.16 : 1, 30kph 450/43850
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-15-50 Differential Aws, Components, L.S.D. 453/32200, 453/33500
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-6-31 Brakes, Axle, 450/43860
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-14-50 Differential Aws, Components, L.S.D. 453/31800, 453/33490
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-3-40 Differential 2ws, Components, L.S.D. 450/37000, 450/43860
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-2-10 Differential 2ws, Assembly, 18.16 : 1, 30kph 450/36900
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-6-40 Differential 2ws, Components, L.S.D. 450/43210, 450/43960
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-13-11 Knuckle, Steering, Aws Rear Axle, 453/31190, 453/33310 C/W Maxtrac
| 13***9Z | Bolt | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-14-11 Knuckle, Steering, Aws Rear Axle, 453/31800, 453/33490 C/W L.S.D.
| 13***9Z | Bolt | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-11-31 Differential Aws, Assembly, 15.78 : 1, 35kph 453/33470, 453/33580
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-13-61 Brakes, Axle, 453/33310
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-3-1 Axle Assembly 2ws, Rear Drive 15.78 : 1, 35kph C/W L.S.D. 450/37000, 450/43860
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-12-31 Differential Aws, Assembly, 18.16 : 1, 30kph 453/33480
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-3-31 Brakes, Axle, 450/43860
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-14-31 Differential Aws, Assembly, 15.78 : 1, 35kph 453/33490 C/W L.S.D.
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-12-21 Hub & Components Aws, Rear Axle, 453/31610, 453/33480
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-14-21 Hub & Components Aws, Rear Axle, 453/31800, 453/33490
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-11-21 Hub & Components Aws, Rear Axle, 453/31600, 453/33470
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F3-4-1 Wheel & Tyre, Assembly, Front, 2ws 4wd 14x17.5
| 10***01 | Nut | 10 |
| 12***06 | Wheel, & Tyre Assembly, Armstrong 14x17.5x10 | 2 |
| 12***88 | Wheel, & Tyre Assembly Goodyear, 14x17.5x10 Ply Ind | 1 |
F3-1-10 Propshaft, Transmission, Front Drive Axle, Powershift
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-5-3 Wheel & Tyre, Assembly, Rear, 2ws 18.4/15x26
| 10***01 | Nut | 10 |
| 12***02 | Wheel, & Tyre Assembly Trac, 18.4x26x12 Olympic | 2 |
| 12***11 | Wheel, & Tyre Assembly Trac, 18.4x26x12 Goodyear | 2 |
F3-4-2 Wheel & Tyre, Assembly, Front, 2ws 4wd 12.5x20
| 10***01 | Nut | 10 |
| 12***21 | Wheel, & Tyre Assembly, 12.5x20x10pr Ind | 2 |
| 15***01 | Valve | 1 |
F3-5-2 Wheel & Tyre, Assembly, Rear, 2ws 19.5lx24
| 10***01 | Nut | 10 |
| 12***46 | Wheel, & Tyre. Armstrong, 19.5lx24x10pr | 2 |
| 12***47 | Wheel, & Tyre. Armstrong, 19.5lx24x12pr | 2 |
F3-5-1 Wheel & Tyre, Assembly, Rear, 2ws 16.9x14x24
| 10***01 | Nut | 10 |
| 12***45 | Wheel, & Tyre. Armstrong, 16.9x24x10pr | 2 |
| 12***36 | Wheel, & Tyre Assembly, Goodyear 16.9x24x12 | 2 |
F3-4-6 Wheel & Tyre, Assembly, Front, 2ws 4wd 335/80 X 20 Xm27
| 10***01 | Nut | 10 |
| 12***11 | Wheel, & Tyre Assembly, 335/80 X R20 Xm27 | 2 |
| 41***00 | Wheel, 11 X 20 | 1 |
F3-4-7 Wheel & Tyre, Assembly, Front, 2ws 4wd 12.5x18
| 10***01 | Nut | 10 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***94 | Wheel, Assembly, 12.5/80x18x10pr | 2 |
F3-6-4 Wheel & Tyre, Assembly, Front & Rear, Aws 17.5x24
| 10***01 | Nut | 20 |
| 12***21 | Wheel, & Tyre Assembly Trac, 46***24 Goodyear | 4 |
| 15***01 | Valve | 1 |
F3-4-5 Wheel & Tyre, Assembly, Front, 4ws 4wd 335/80 X 18
| 10***01 | Nut | 10 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***97 | Wheel, & Tyre Assembly, 335x18 R Michelin | 2 |
F3-6-5 Wheel & Tyre, Assembly, Front & Rear, Aws 16.9x28
| 12***41 | Wheel, & Tyre. Armstrong, 16.9x28x12pr Ind | 4 |
| 12***09 | Wheel, & Tyre Assembly Ind, 16.9x28x12 Goodyear | 4 |
| 12***10 | Wheel, & Tyre Assembly Ind, 16.9x28x10 Goodyear | 4 |
F3-2-12 Propshaft, Transmission, Rear Drive Axle, Powershift 40kph Build
| 11***25 | Strap | 2 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-2-11 Propshaft, Transmission, Rear Drive Axle, Powershift
| 11***25 | Strap | 2 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F3-6-2 Wheel & Tyre, Assembly, Front & Rear, Aws 15.5x25x1star
| 10***01 | Nut | 20 |
| 26***01 | Valve | 1 |
| 26***00 | Wheel, & Tyre Assembly 15.5-25, Michelin Xgla | 4 |
F3-6-6 Wheel & Tyre, Assembly, Front & Rear, Aws 17.5x25
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***90 | Wheel, And Tyre 17.5x25x12, Goodyear Tubeless | 4 |
| 26***00 | Valve, Angled | 1 |
F3-6-3 Wheel & Tyre, Assembly, Front & Rear, Aws 16.9x24
| 12***40 | Wheel, & Tyre. Armstrong, 16.9x24x12pr | 4 |
| 12***13 | Wheel, & Tyre Assembly Ind, 16.9x24x12 Goodyear | 4 |
| 12***97 | Wheel, & Tyre Assembly, Ind, Goodyear 16.9x24x12 | 4 |
F3-5-5 Wheel & Tyre, Assembly, Rear, 2ws 18.4x30
| 10***01 | Nut | 10 |
| 12***00 | Wheel, & Tyre Assembly Goodyear, 18.4x30x14pr | 1 |
| 12***13 | Wheel, & Tyre Continental, 18.4x30x14 Pr Ind | 2 |
F3-5-6 Wheel & Tyre, Assembly, Rear, 2ws 21lx24
| 10***01 | Nut | 10 |
| 12***68 | Wheel, & Tyre Assembly, Ind, 21lx24x12 Goodyear | 2 |
| 15***01 | Valve | 1 |
F3-5-4 Wheel & Tyre, Assembly, Rear, 2ws 16.9/14x28
| 10***01 | Nut | 10 |
| 12***00 | Wheel, /Tyre Assembly Firestone, 16.9/14x28x12pr | 2 |
| 12***00 | Wheel, & Tyre Assembly Michelin, 16.9x28x2str | 2 |
F3-4-3 Wheel & Tyre, Assembly, Front, 2ws 4wd 12.00x18
| 10***01 | Nut | 10 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***06 | Wheel, & Tyre Assembly | 2 |
F3-6-1 Wheel & Tyre, Assembly, Front & Rear, Aws 14.9x24
| 10***01 | Nut | 20 |
| 12***61 | Wheel, & Tyre Assembly, Ind, Goodyear 14.9x24x12 | 4 |
| 15***01 | Valve | 1 |
F3-4-4 Wheel & Tyre, Assembly, Front, 2ws 4wd 340x18
| 10***01 | Nut | 10 |
| 12***89 | Wheel, & Tyre Assembly, 34***18 Goodyear | 2 |
| 26***00 | Valve, Angled | 1 |
F6-8-1 Transmission, Mounting, Powershift
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***07 | Bracket, Transmission Mount, Powershift | 1 |
F6-1-21 Transmission, 2ws 4wd Clutch Unit, Drop Box 449/11000
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F6-3-71 Switch, Solenoid, 2ws 4wd 30kph, 449/11030 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-1-71 Switch, Solenoid, 2ws 4wd 35kph, 449/11000 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-14-2 Transmission Assy, Aws 20kph Ps740, 449/11130 Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***01 | Gear, Input, 24t | 1 |
| 44***01 | Gear, Output, 44t | 1 |
F6-5-31 Clutch, Input, 2ws 4wd 40kph, 449/11060, 449/11110 Powershift Trans.
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-10-71 Switch, Solenoid, 2ws 4wd 20kph, 449/11140 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-10-51 Clutch, Mainshaft, 2ws 4wd 20kph, 449/11140 Powershift Trans.
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-14-31 Clutch, Input, Aws 20kph, 449/11130 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-10-11 Transmission, External Components, 2ws 4wd 20kph 449/11140
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F6-3-51 Clutch, Mainshaft, 2ws 4wd 30kph, 449/11030 Powershift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-1-41 Clutch, Reverse, 2ws 4wd 35kph, 449/11000 Powershift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-11-21 Transmission, Aws Clutch Unit, Drop Box 449/11010
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F6-1-31 Clutch, Input, 2ws 4wd 35kph, 449/11000 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-14-51 Clutch, Mainshaft, Aws 20kph, 449/11130 Powershift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-14-41 Clutch, Reverse, Aws 20kph, 449/11130 Powershift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-5-81 Pipework, Aws 4wd 40kph, 449/11060, 449/11110 Powershift Trans.
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-10-22 Transmission, 2ws 4wd Clutch Unit, Drop Box, 449/12020
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-3-61 Clutch, Layshaft, 2ws 4wd 30kph, 449/11030 Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-5-2 Transmission Assy, 2ws 4wd 40kph Ps740, 449/11060, 449/11110 Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***00 | Clutch, Assembly | 1 |
| 44***01 | Gear, Input, 24t | 1 |
F6-3-2 Transmission Assy, 2ws 4wd 30kph Ps740, 449/11030 Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***01 | Gear, Input 25t | 1 |
| 44***00 | Gear, Ouput, 41t, Plate Carrier | 1 |
F6-13-2 Transmission Assy, Aws 40kph Ps740, 449/11070, 449/11120 Auto Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***00 | Clutch, Assembly | 1 |
| 44***01 | Gear, Input, 25t | 1 |
F6-13-31 Clutch, Input, Aws 40kph, 449/11070, 449/11120 Auto Powershift
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-9-1 Flywheel Housing, Cover Plate
| 13***3Z | Screw, M8 X 16 | 1 |
| 44***03 | Cover, Flywheel Housing, 110mm X 79mm X 17mm | 1 |
| 99***00 | Cover, Plate Assembly, Flywheel | 1 |
F6-14-81 Pipework, Aws 20kph, 449/11130 Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-13-11 Transmission, External Components, Aws 40kph 449/11070, 449/11120
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
F6-14-22 Transmission, Clutch Unit, Drop Box, 449/12010
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-12-51 Clutch, Mainshaft, Aws 30kph, 449/11040 Powershift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-12-41 Clutch, Reverse, Aws 30kph, 449/11040 Powershift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-3-31 Clutch, Input, 2ws 4wd 30kph, 449/11030 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-12-81 Pipework, Aws 30kph, 449/11040 Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-14-71 Switch, Solenoid, Aws 20kph, 449/11130 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-13-71 Switch, Solenoid, Aws 40kph, 449/11070, 449/11120 Auto Powershift
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-12-21 Transmission, Aws Clutch Unit, Drop Box 449/11040
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F6-5-41 Clutch, Reverse, 2ws 4wd 40kph, 449/11060, 449/11110 Powershift Trans.
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-11-71 Switch, Solenoid, Aws 35kph, 449/11010 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-3-81 Pipework, 2ws 4wd 30kph, 449/11030 Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-14-21 Transmission, Aws Clutch Unit, Drop Box 449/11130
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-21-1 Dipstick, Ss740, Transmission
| 12***40 | Bracket, Gearbox Filler; Replaced By 12***04, See San09578 | 1 |
| 12***44 | Tube, Dipstick, Powershift | 1 |
| 12***99 | Dipstick | 1 |
F6-11-51 Clutch, Mainshaft, Aws 35kph, 449/11010 Powershift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-13-81 Pipework, Aws 40kph, 449/11070, 449/11120 Auto Powershift
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-3-21 Transmission, 2ws 4wd Clutch Unit, Drop Box 449/11030
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F6-10-31 Clutch, Input, 2ws 4wd 20kph, 449/11140 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-12-11 Transmission, External Components, Aws 30kph 449/11040
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F6-10-2 Transmission Assy, 2ws 4wd 20kph Ps740, 449/11140 Powershift
| 44***03 | Washer, Thrust; Superseded By 82***82 | 2 |
| 44***03 | Yoke, Coupling | 1 |
| 44***01 | Gear, Input,26t | 1 |
F6-20-1 Fasteners, Flywheel Housing, Transmission To Gearbox
| 02***70 | Dowel | 2 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
F6-11-81 Pipework, Aws 35kph, 449/11010 Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-5-61 Clutch, Layshaft, 2ws 4wd 40kph, 449/11060, 449/11110 Powershift Trans.
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-13-21 Transmission, Aws Clutch Unit, Drop Box 449/11070, 449/11120
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F6-14-11 Transmission, External Components, Aws 20kph 449/11130
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F6-1-51 Mainshaft Components, 2ws 4wd 35kph, 449/11000 Powershift Transmission
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-12-61 Clutch, Layshaft, Aws 30kph, 449/11040 Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-5-11 Transmission, External Components, 2ws 4wd 40kph 449/11060, 449/11110
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
F6-3-11 Transmission, External Components, 2ws 4wd 30kph 449/11030
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F6-11-61 Clutch, Layshaft, Aws 35kph, 449/11010 Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-10-21 Transmission, 2ws 4wd Clutch Unit, Drop Box 449/11140
| 22***04 | Circlip | 1 |
| 24***21 | O Ring | 1 |
| 24***44 | O Ring | 1 |
F6-12-31 Clutch, Input, Aws 30kph, 449/11040 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-11-11 Transmission, External Components, Aws 35kph 449/11010
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F6-11-41 Clutch, Reverse, Aws 35kph, 449/11010 Powershift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-11-31 Clutch, Input, Aws 35kph, 449/11010 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***00 | Pump; Superseded By 20/92***27 See San 14259 | 1 |
| 20***01 | Seal, Oil, Trans Pump | 1 |
F6-13-61 Clutch, Layshaft, Aws 40kph, 449/11070, 449/11120 Auto Powershift
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-14-61 Clutch, Layshaft, Aws 20kph, 449/11130 Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-10-41 Clutch, Reverse, 2ws 4wd 20kph, 449/11140 Powershift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-1-11 Transmission, External Components, 2ws 4wd 35kph 449/11000
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***9Z | Screw, M10 X 35 | 11 |
| 13***01 | Capscrew, M6 X 10mm X 12.9 | 1 |
F6-13-41 Clutch, Reverse, Aws 40kph, 449/11070, 449/11120 Powershift Trans.
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-1-2 Transmission Assy, 2ws 4wd 35kph Ps740, 449/11000 Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***01 | Gear, Input,26t | 1 |
| 44***00 | Gear, Ouput, 41t, Plate Carrier | 1 |
F6-12-71 Switch, Solenoid, Aws 30kph, 449/11040 Powershift Transmission
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
F6-1-61 Layshaft Components, 2ws 4wd 35kph, 449/11000 Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-5-51 Clutch, Mainshaft, 2ws 4wd 40kph, 449/11060, 449/11110 Powershift Trans.
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-7-2 Torque Converter, 12.2"Dia 2.8 : 1 Ratio, Drive Plate & Transmission Dipstick
| 04***00 | Converter, 12.2"Dia - 2.82:1, Purple/Yellow/Purple | 1 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***02 | Bolt, M8 X 20 | 6 |
F6-10-81 Pipework, 2ws 4wd 20kph, 449/11140 Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-5-21 Transmission, 2ws 4wd Clutch Unit, Drop Box 449/11060, 449/11110
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F6-11-2 Transmission Assy, Aws 35kph Ps740, 449/11010 Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***01 | Gear, Input, 24t | 1 |
| 44***00 | Gear, 44t, Output, Plate Carrier | 1 |
F6-10-61 Clutch, Layshaft, 2ws 4wd 20kph, 449/11140 Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***04 | Retainer, Spring | 1 |
| 44***05 | Baffle, Oil | 1 |
F6-13-51 Clutch, Mainshaft, Aws 40kph, 449/11070, 449/11120 Auto Powershift
| 22***15 | Circlip | 1 |
| 33***55 | Baffle, Oil | 1 |
| 44***05 | Plate, Friction | 9 |
F6-1-81 Pipework, 2ws 4wd 35kph, 449/11000 Powershift Transmission
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
F6-3-41 Clutch, Reverse, 2ws 4wd 30kph, 449/11030 Powershift Transmission
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-12-2 Transmission Assy, Aws 30kph Ps740, 449/11040 Powershift
| 44***03 | Yoke, Coupling | 1 |
| 44***01 | Gear, Input, 24t | 1 |
| 44***00 | Gear, 44t, Output, Plate Carrier | 1 |
F6-5-71 Switch, Solenoid, 2ws 4wd 40kph, 449/11060, 449/11110 Powershift Trans.
| 13***1Z | Bolt, M8 X 45 | 2 |
| 13***8Z | Bolt | 14 |
| 13***2Z | Capscrew, M5 X 50mm | 12 |
G Brakes
G1-1-1 Brake, System, Servo
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***12 | Pipe, Left Hand Front | 1 |
G1-3-1 Brake, Parking
| 13***04 | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***3Z | Nut, Lock, M10 | 1 |
G1-4-1 Brake, Servo
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Spring | 2 |
| 15***02 | Grommet | 1 |
G1-1-10 Brake, System
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***16 | Pipe, Servo Link | 1 |
G1-2-1 Brakes, Rear Axle
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
G1-3-2 Brake, Parking
| 15***01 | Kit-Brake Pad; Replaced By 15/92***03 | 1 |
| 15***03 | Kit, Spring | 1 |
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
N Engine 1004-4, 1004-4t
N1-6-2 Timing Case, Camshaft & Gears, Ab Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N1-5-4 Fans, Pulleys, & Fan Belt, Air Conditioning, Aa & Ab Builds
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
N1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ab Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-2-12 Engine, Long, Ab Build
| 02***82 | Engine, Long, Ab Build, Turbo, 1004-4t | 1 |
N1-7-1 Flywheel, & Starter Ring Gear, Ab Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***25 | Washer | 6 |
N1-5-1 Fans, Pulleys, & Fan Belt, Ab Builds
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 1 |
| 02***17 | Block, Thrust | 1 |
N1-5-3 Fans, Pulleys, & Fan Belt, Ab Builds
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***52 | Fan, Alternator | 1 |
N1-3-2 Block Assembly, Ab Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-5-0 Fan Belt, Identification Chart
N1-8-1 Engine Mountings, 2ws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***01 | Bracket, Engine Mounting, Left Hand | 1 |
N1-1-4 Engine, Complete, Ab Build, 96bhp
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 96bhp | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 96bhp | 1 |
N1-1-3 Engine, Complete, Ab Build, 90bhp
| 01***00 | Engine, Complete, 1004-4t, Turbocharged, 90bhp | 1 |
N1-8-2 Engine Mountings, Aws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***04 | Bracket, Engine Mounting, Left Hand | 1 |
N1-5-2 Fans, Pulleys, & Fan Belt, Air Conditioning, Ab Builds
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
N1-5-6 Fans, Pulleys, & Fan Belt, Air Conditioning, Ab Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 4 |
N1-2-2 Engine, Short, Ab Build
| 02***47 | Engine, Short | 1 |
N2-1-2 Cylinder Head, Ab Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-3-1 Rocker Cover
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Ab Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-4-2 Lifting Plates, Engine, Ab Build
| 02***31 | Plate, Lifting | 1 |
| 02***36 | Plate, Lifting | 1 |
| 02***71 | Bolt | 2 |
N3-4-5 Silencer & Extension, Turbocharged, 90bhp, 'Q' Build Ab
| 12***57 | Pipe, Exhaust Extension, I/D=78mm | 1 |
| 12***73 | Bracket, Exhaust Mounting, Rear | 1 |
| 12***43 | Silencer, Exhaust | 1 |
N3-3-2 Filter, Air, Turbocharged, 2ws, Ab Build
| 12***65 | Clip | 1 |
| 12***00 | Box, Air Induction | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
N3-4-4 Silencer & Extension, Turbocharged, 90/96bhp, Ab Build
| 12***25 | Stay, Silencer Support | 1 |
| 12***38 | Pipe, Exhaust Extension, I/D=66mm | 1 |
| 12***05 | Silencer, Exhaust, Turbo | 1 |
N3-1-2 Manifold, Induction, Ab Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N3-3-4 Filter, Pre-Cleaner, Optional
| 12***70 | Pipe, Precleaner Induction | 1 |
| 12***71 | Plate, Adapter, Pre-Cleaner | 1 |
| 12***66 | Bonnet, With Pre-Cleaner | 1 |
N3-3-3 Filter, Air, Turbocharged, Aws, Ab Build
| 12***65 | Clip | 1 |
| 12***00 | Box, Air Induction | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
N3-2-2 Manifold, Exhaust, Ab Build
| 02***50 | Gasket | 2 |
| 02***22 | Gasket | 1 |
| 02***76 | Manifold, Exhaust | 1 |
N4-3-3 Radiator, Fittings & Mountings, Aws
| 12***99 | Cowling, Fan 21", Aws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***69 | Guard, Cooling Fan, Left Hand | 1 |
N4-3-1 Radiator, Fittings & Mountings, 2ws
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***69 | Guard, Cooling Fan, Left Hand | 1 |
N4-4-1 Radiator & Hoses, Ab Builds, 2ws With 4 Row Oil Cooler
| 12***05 | Spacer | 2 |
| 12***76 | Cap, 0.5bar Pressure | 1 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
N4-4-2 Radiator & Hoses, Aa & Ab Builds, 2ws With 5 Row Oil Cooler
| 12***05 | Spacer | 2 |
| 12***76 | Cap, 0.5bar Pressure | 1 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
N4-4-4 Radiator & Hoses, Ab Builds, Aws With 5 Row Oil Cooler
| 12***05 | Spacer | 2 |
| 12***76 | Cap, 0.5bar Pressure | 1 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
N4-3-4 Radiator, Fittings & Mountings, Air Conditioning Builds, Aws
| 12***99 | Cowling, Fan 21", Aws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***68 | Guard, Cooling Fan, Left Hand | 1 |
N4-3-2 Radiator, Fittings & Mountings, Air Conditioning Builds, 2ws
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***68 | Guard, Cooling Fan, Left Hand | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Ab Builds
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 2 |
| 02***03 | Plug, Core", D=26mm | 1 |
N4-1-1 Pump, Water, Ab Builds
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***86 | Gasket | 1 |
N4-4-3 Radiator & Hoses, Ab Builds, Aws With 4 Row Oil Cooler
| 12***05 | Spacer | 2 |
| 12***76 | Cap, 0.5bar Pressure | 1 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
N4-2-2 Thermostat, Housing, Inlet & Outlet, Air Conditioned, Ab Builds
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 2 |
| 02***03 | Plug, Core", D=26mm | 1 |
N5-1-1 Sump, Oil, & Fittings, Ab Builds
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
N5-5-2 Cooler, Oil, Hose & Pipework, Ab Build, 90bhp
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
N5-3-1 Piston Cooling Jets, Ab Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
N5-5-3 Cooler, Oil, Hose & Pipework, Ab Build, 96bhp
| 02***13 | Connector | 1 |
| 02***17 | O Ring | 4 |
| 02***31 | Gasket | 2 |
N5-4-2 Filter, Oil, & Oil Feed Adapter, Ab Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***94 | Connector | 1 |
| 02***20 | Head, Filter | 1 |
N5-2-2 Pump, Oil, & Relief Valve, Ab Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N6-7-3 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-2-4 Injectors, Fuel, & Injection Pipes, Ab Build, 96bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 1 |
N6-2-2 Injectors, Fuel, & Injection Pipes, Ab Build, 90bhp
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-1-2 Pump, Fuel Injection, Ab Build 90bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-4-2 Fuel Pipes, Fuel Tank To Filter, Ab Build 96bhp
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-1-3 Pump, Fuel Injection, Ab Build 96bhp
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-3-2 Fuel Pipes, Injection Pump, Ab Build, 90bhp
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-5-2 Fuel Heater, & Fuel Feed Pipe, Ab Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
N6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
N6-4-1 Fuel Pipes, Fuel Tank To Filter, Ab Build 90bhp
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-3-4 Fuel Pipes, Injection Pump, Ab Build, 96bhp
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 4 |
N6-3-5 Fuel Pipes, Injection Pump, Ab Build, 96bhp
| 02***17 | Nut | 2 |
| 02***22 | Olive | 3 |
| 02***48 | Elbow | 1 |
N7-7-2 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 12***46 | Bracket, Mounting | 1 |
| 13***3Z | Screw, M6x16 | 2 |
N7-2-1 Turbocharger, Pipework & Mounting, Ab Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***06 | Nut | 1 |
N7-5-1 Compressor 12.Volt, Air Conditioning
| 12***37 | Valve, Pressure | 1 |
| 12***41 | Shim | 3 |
| 12***45 | Bracket, Compressor Mounting | 1 |
N7-8-1 Cold Start, Ether
| 12***09 | Block, Or Fitting | 1 |
| 12***10 | Clamp | 1 |
| 12***11 | Canister, Fluid | 1 |
N7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
N7-4-1 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 1 |
| 15***11 | Bearing | 2 |
N7-3-1 Pump, Vacuum, & Installation
| 13***07 | Capscrew | 2 |
| 14***01 | Washer, Aluminium | 1 |
| 14***11 | Seal, Bonded | 1 |
N7-1-2 Turbocharger, Ab Build, 96bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N7-1-1 Turbocharger, Ab Build, 90bhp
| 02***58 | Nut, Lock | 1 |
| 02***59 | Wheel | 1 |
| 02***60 | Ring, Piston | 1 |
N8-1-1 Gasket Sets, Aa & Ab Build
| 02***77 | Kit-Gasket, Bottom | 1 |
| 02***41 | Kit-Gasket, Top | 1 |
N8-2-2 Kit, Engine 0verhaul, Ab Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
P Engine 1004-4, 1004-4t Tier 1, Emissions
P1-5-0 Fan Belt, Identification Chart
P1-2-4 Engine, Long, Ak Build 92 Bhp
| 02***37 | Engine Short | 1 |
P1-3-4 Block Assembly, Ak Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-5-2 Fans, Pulleys, & Fan Belt, Air Conditioning, Ak Builds
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-2-6 Engine, Long, Ak Build 100 Bhp, 85 Amp
| 02***36 | Engine, Short | 1 |
P1-1-4 Engine, Complete, Ak Build, 100bhp
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 100bhp | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 100bhp | 1 |
P1-5-3 Fans, Pulleys, & Fan Belt, Ak Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***52 | Fan, Alternator | 1 |
P1-1-3 Engine, Complete, Ak Build, 92bhp
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 92bhp | 1 |
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 92bhp | 1 |
P1-2-2 Engine, Short, Ak Build
| 02***60 | Engine, Short, Turbo | 1 |
P1-6-3 Timing Case, Soundproofing
| 02***07 | Screw | 2 |
| 02***03 | Shield | 1 |
| 02***04 | Damper | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt, Ar Builds
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-7-1 Flywheel, & Starter Ring Gear, Ak Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***25 | Washer | 6 |
P1-3-2 Block Assembly, Ak Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-8-1 Engine Mountings, 2ws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***01 | Bracket, Engine Mounting, Left Hand | 1 |
P1-5-4 Fans, Pulleys, & Fan Belt, Air Conditioning, Ak Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-2-5 Engine, Long, Ak Build 100 Bhp, 72 Amp
| 02***37 | Engine Short | 1 |
P1-6-2 Timing Case, Camshaft & Gears, Ak Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-8-2 Engine Mountings, Aws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***04 | Bracket, Engine Mounting, Left Hand | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P2-1-3 Cylinder Head, Ak Build, 100bhp
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-4-1 Lifting Plates, Engine, Ak Build
| 02***31 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-1-2 Cylinder Head, Ak Build, 92bhp
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-3-1 Rocker Cover, Ak Builds
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
| 02***59 | Bracket | 1 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Ak Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-3-2 Rocker Cover, Policeman Breather, Ar & Ak Builds
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
| 02***94 | O Ring | 1 |
P3-4-2 Silencer & Extension, Turbocharged, Ak Build, 92/100bhp
| 02***16 | Screw | 1 |
| 12***67 | Silencer, Exhaust, Turbo | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
P3-3-2 Filter, Air, Turbocharged, 2ws
| 12***65 | Clip | 1 |
| 12***00 | Box, Air Induction | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
P3-3-3 Filter, Air, Turbocharged, Aws
| 12***65 | Clip | 1 |
| 12***00 | Box, Air Induction | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
P3-3-4 Filter, Pre-Cleaner, Optional
| 12***70 | Pipe, Precleaner Induction | 1 |
| 12***71 | Plate, Adapter, Pre-Cleaner | 1 |
| 12***81 | Bonnet, With Pre-Cleaner | 1 |
P3-1-2 Manifold, Induction, Ak Build
| 02***89 | Hose, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***53 | Manifold, Air Induction | 1 |
P3-2-2 Manifold, Exhaust, Ak Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P4-3-1 Radiator, Fittings & Mountings, 2ws
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***69 | Guard, Cooling Fan, Left Hand | 1 |
P4-3-3 Radiator, Fittings & Mountings, Aws
| 12***99 | Cowling, Fan 21", Aws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***69 | Guard, Cooling Fan, Left Hand | 1 |
P4-1-1 Pump, Water, Ak Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
| 02***10 | Pump, Water | 1 |
P4-4-3 Radiator & Hoses, Aws With 4 Row Oil Cooler
| 12***65 | Clip | 1 |
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
P4-3-4 Radiator, Fittings & Mountings, Air Conditioning Builds, Aws
| 12***99 | Cowling, Fan 21", Aws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***68 | Guard, Cooling Fan, Left Hand | 1 |
P4-2-2 Thermostat, Housing, Inlet & Outlet, Ak Builds
| 02***95 | Plug, Taper | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
| 02***46 | O Ring | 1 |
P4-4-4 Radiator & Hoses
| 12***65 | Clip | 1 |
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
P4-3-2 Radiator, Fittings & Mountings, Air Conditioning Builds, 2ws
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***68 | Guard, Cooling Fan, Left Hand | 1 |
P4-4-1 Radiator & Hoses, 2ws With 4 Row Oil Cooler
| 12***65 | Clip | 1 |
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
P4-4-2 Radiator & Hoses
| 12***65 | Clip | 1 |
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
P5-4-2 Filter, Oil, & Oil Feed Adapter, Ak Build. 100bhp
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***96 | Gasket | 2 |
| 02***32 | Adapter, Oil Feed | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Ak Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-5-2 Cooler, Oil, Filter & Pipework, Ak Build 92bhp
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P5-3-1 Piston Cooling Jets, Ak Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P5-5-3 Cooler, Oil, Hose & Pipework, Ak Build, 100bhp
| 02***13 | Connector | 1 |
| 02***17 | O Ring | 4 |
| 02***31 | Gasket | 2 |
P5-1-1 Sump, Oil, & Fittings, Ak Builds
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
P5-5-4 Cooler, Oil, Hose & Pipework, Ak Build, 100bhp
| 02***73 | Element, Oil Filter, Canister Type - Long | 2 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P6-3-2 Fuel Pipes, Injection Pump, Ak Build, 92bhp
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 4 |
P6-2-2 Injectors, Fuel, & Injection Pipes, Ak Build, 92bhp
| 02***59 | Adapter, Union | 2 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-1-2 Pump, Fuel Injection, Ak Build 92bhp
| 02***63 | Bracket, Support | 1 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-6-2 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
P6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P6-5-2 Fuel Heater, & Fuel Feed Pipe, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***31 | Clip | 1 |
P6-2-3 Injectors, Fuel, & Injection Pipes, Ak Build, 100bhp
| 02***59 | Adapter, Union | 2 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-1-3 Pump, Fuel Injection, Ak Build 100bhp
| 02***22 | Olive | 1 |
| 02***79 | Nut | 2 |
| 02***86 | Bracket | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-3-3 Fuel Pipes, Injection Pump, Ak Build, 100bhp
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***48 | Elbow | 1 |
P6-8-2 Pump, Fuel Lift
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 2 |
P7-1-3 Turbocharger, Ak Build, 92bhp
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***70 | Turbocharger | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P7-1-2 Turbocharger, Ak Build, 100bhp
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***71 | Housing, Compressor | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P7-1-1 Turbocharger, Ak Build, 92bhp
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***70 | Turbocharger | 1 |
| 02***71 | Housing, Compressor | 1 |
P7-7-2 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 12***46 | Bracket, Mounting | 1 |
| 13***3Z | Screw, M6x16 | 2 |
P7-4-1 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 1 |
| 15***11 | Bearing | 2 |
P7-5-1 Compressor 12.Volt, Air Conditioning
| 12***37 | Valve, Pressure | 1 |
| 12***41 | Shim | 0 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
P7-8-1 Cold Start, Ether
| 12***09 | Block, Or Fitting | 1 |
| 12***10 | Clamp | 1 |
| 12***11 | Canister, Fluid | 1 |
P7-1-4 Turbocharger, Ak Build, 100bhp
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Ak Build
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P7-3-1 Pump, Vacuum, & Installation
| 13***07 | Capscrew | 2 |
| 14***01 | Washer, Aluminium | 1 |
| 14***11 | Seal, Bonded | 1 |
P8-1-2 Gasket Set, Top, Ak Build
| 02***49 | Kit-Gasket, Top | 1 |
P8-2-1 Gasket Set, Bottom, Ar & Ak Builds
| 02***51 | Kit-Gasket, Bottom | 1 |
Frequently asked questions
What engine does the JCB 4CN use?
The JCB 4CN uses a JCB DieselMax 4-cylinder turbocharged diesel engine producing 81.5 kW (109 hp) and 500 Nm of torque at 1,400 rpm.
What is the operating weight of the JCB 4CN?
The operating weight of the JCB 4CN is 8.85 tons.
What model replaced the JCB 4CN?
The JCB 4CX series succeeded the 4CN, continuing production from 2009 to 2017.
What 4CN PC owners discuss
What engine generation is typically found in the JCB 4CN PC, and what are the known powertrain or hydraulic behaviors associated with it?
The JCB 4CN (manufactured 2009–2017) utilizes the JCB DieselMax 4-cylinder turbocharged engine. Early Dieselmax units (Tier 2/early Tier 3) are prone to big end bearing failures on the crankshaft if oil intervals are stretched. Later Tier 4i/T4 Final EcoMax variants are sensitive to fuel quality, with injector faults causing rough running or white smoke. Hydraulic systems rely on high-pressure pumps; loss of power in specific directions (e.g., forward vs. reverse) often stems from electrical microswitches on the transmission body failing to activate hydraulic solenoids rather than pump failure. Variations in hydraulic flow and torque occur based on the specific engine tier and transmission configuration (4-speed powershift vs. 6-speed Autoshift).
What are the typical undercarriage or wear patterns for this machine type?
The JCB 4CN is a wheeled backhoe loader, not a tracked excavator, so it does not have undercarriage tracks. Wear patterns focus on the tire setup (standard 16.9-24 or 16.9-28 tires), axle hubs, and steering components. The TorqueLock system on PLUS and PRO models reduces fuel consumption but adds stress to transmission and brake components during road travel. High-dust environments (e.g., quarries, dry agricultural land) accelerate wear on piston rings and air filters if cyclone pre-filters are not installed, leading to heavy breathing and oil consumption.
What engine quirks per series should operators be aware of?
Early Dieselmax engines (Tier 2/early Tier 3) exhibit fuel injection pump faults and are sensitive to oil quality. Later Tier 4i/T4 Final EcoMax engines require high-quality fuel to prevent injector issues. Cold starting relies on glow plugs; a failed glow plug relay or timer causes hard starting in cold weather. The engine is a high-compression diesel requiring strong crank speed (minimum 12.4V for 12V systems or 24.8V for 24V systems). In dusty conditions, standard air filtration fails quickly, necessitating cyclone pre-filters to prevent accelerated ring and bore wear.
What are the common electrical or sensor issues reported?
Starting problems are frequently linked to weak batteries (below 12.4V/24.8V) or corroded terminals/earth straps. Electrical shutdowns and intermittent movement issues often trace to faulty microswitches on the forward/reverse lever that activate hydraulic solenoids on the transmission body. Wiring faults, ground issues, and ECU failures can cause shutdowns. Fuel gauges on plant machinery are often unreliable, leading to false 'empty' readings or condensation-related fuel system issues.
What should be checked when buying a used 4CN PC?
Verify the 17-character PIN (ISO 3779 format) to confirm model year (10th character) and plant code (Rocester UK, Pooler US, or Pune India). Check the engine data plate to identify the specific DieselMax variant (Tier 2/3 vs. Tier 4i/EcoMax) for accurate parts and troubleshooting. Inspect the transmission body for solenoid function and microswitch integrity. Test hydraulic performance at different ground levels, as some older JCB powertrains lose pressure when the rear is lower than the front. Check for silicate separation in the coolant expansion bottle (brown sludge) and verify the condition of the air intake system for dust damage.
What safety-critical fixes require dealer verification?
Any diagnosis of internal engine wear (worn piston rings, big end bearing knock) or ECU-related shutdowns requires professional diagnostic software and OEM verification. Safety systems like the keypad immobilizer, check valves, and rear screen protection must be verified against factory specifications. Coolant system integrity (silicate separation) and high-pressure fuel system components (injectors, high-pressure pump) should be serviced using JCB-approved fluids and filters to maintain warranty and safety standards.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 4CN PC. Related factory variants of the same model family:
4CN PC
Need a specific 4CN PC part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.