JCBagriculturalbackhoe loader 3cx,4cx,214,215,217
Jcb 4C-2 Turbo
Maintenance schedule, common problems & OEM parts breakdown
The JCB 4C-2 Turbo is a backhoe loader belonging to the 4CX series, produced from approximately 2002 to 2008. It is powered by a 4.4-liter, four-cylinder turbocharged Dieselmax or EcoMAX engine delivering 74 kW (100 hp) net power. Operating weight ranges from 8,722 kg (19,229 lb) to 13,063 kg (28,798 lb) depending on configuration. The 4CX series succeeded the 4C and was succeeded by the 4CX Max and 4CX Plus generations. Configurations included 2-wheel steer (2WS) and 4-wheel steer (4WS) variants, with options for sideshift or centermount loader frames.
Across the 4CX generation, JCB introduced the Dieselmax and EcoMAX engine families, extending engine oil intervals to 500 hours to reduce downtime compared to competitors. The 4C-2 Turbo specifically utilizes the mechanically controlled 444 engine variant. In the used market, these machines are valued for their simple, non-DEF powertrain and robust hydraulic systems. Parts availability remains high due to the large fleet size, though engine-specific components like turbochargers and injectors require careful inspection due to age.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 4C-2 Turbo specifications
Engine
| Engine Make | JCB 2257 |
| Configuration | 4 cylinder turbocharged |
| Displacement | 268.6 cu in (4.4 L) |
| Gross Power | 81 hp (60 kW) |
| Net Power | 97.6 hp (73 kW) |
| Power Measured At | 2200 rpm |
| Net Max Torque | 380.6 lb ft (516 Nm) |
| Torque Measured At | 1300 rpm |
Weights
| Operating Weight | varies by configuration/series |
Dimensions
| Transport Length | 19.39 ft (5.91 m) |
| Transport Width | 7.75 ft (2.36 m) |
| Transport Height | 12.9 ft (3.93 m) |
| Wheelbase | 7.29 ft (2.22 m) |
| Ground Clearance | 1.12 ft (0.34 m) |
| Height To Top Of Suspended Cab | 9.45 ft (2.88 m) |
Performance
| Max Speed - Forward | 23.7 mph (38.1 km/h) |
| Max Speed Reverse | 23.7 mph (38.1 km/h) |
| Dig Depth - Std | 14.18 ft (4.32 m) |
| Dig Depth - Ext | 18.15 ft (5.53 m) |
| Load Height - Std | 12.6 ft (3.84 m) |
| Load Height - Ext | 14.05 ft (4.28 m) |
| Reach From Swivel - Std | 17.72 ft (5.40 m) |
| Reach At Load Height - Std | 9.26 ft (2.82 m) |
| Reach At Load Height - Ext | 12.31 ft (3.75 m) |
| Load At Max Lift - Std | 4510.66 lb (2046 kg) |
| Load At Max Lift - Ext | 4155.72 lb (1885 kg) |
| Bucket Dig Force - Std | 11851 lb (5277 kg) |
| Bucket Dig Force - Ext | 11851 lb (5277 kg) |
| Bucket Breakout Force | 13699 lb (6214 kg) |
| Clearance At Max Dump Height | 8.83 ft (2.69 m) |
| Reach At Max Dump Height | 3.97 ft (1.21 m) |
| Dig Depth (Loader) | 5.52 in (0.14 m) |
Service capacities (summary)
| Fuel Capacity | 42.3 gal (160 L) |
| Hydraulic System Fluid Capacity | 34.9 gal (132 L) |
| Oil System Fluid Capacity | 4 gal (15 L) |
| Cooling System Fluid Capacity | 4.9 gal (18.5 L) |
| Transmission Fluid Capacity | 4.3 gal (16 L) |
| Front Axle Fluid Capacity | 4.3 gal (16 L) |
| Rear Axle Fluid Capacity | 4.3 gal (16 L) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
4C-2 Turbo fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 11.1 L (2.5 UK gal) | JCB 15W/40 Multigrade engine oil. Viscosity range: -10°C to 50°C (14°F to 122°F). For temperatures below -10°C, use lower viscosity grade per JCB standards. |
| Cooling system | 4.9 L (1.3 US gal) | JCB OAT Coolant. Replace every 2,000 hours. |
| Fuel tank | 42.3 US gal (160 L) | Diesel Oil. See Types of Fuel in manual. |
| Transmission | 4.3 L (1.1 US gal) | JCB Super Universal Agricultural transmission fluid. |
| Front axle | 4.3 L (1.1 US gal) | JCB Super Universal Agricultural fluid. |
| Rear axle | 4.3 L (1.1 US gal) | JCB Super Universal Agricultural fluid. |
| Hydraulic system and tank | 34.9 US gal (132 L) | JCB Genuine Hydraulic Oil. High quality base oils with latest additive technology. |
| Grease | N/A | JCB Blue Grease or JCB Boom Grease. Long-life protection with significant load handling capacity. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 4C-2 Turbo maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 4C-2 Turbo beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic tank, and axle housings to establish a baseline. JCB Dieselmax engines rely on JCB 15W-40 Multigrade oil; monitor for silicate separation in the coolant expansion bottle, which indicates the need for a coolant change. Inspect the hydraulic return filter magnet for metallic debris at every 250-hour service. Early detection of wear metals in the hydraulic sample can prevent pump failure in the open-center twin gear pump system.
Corrective & Common Repairs
The 4.4-liter 444 engine is mechanically controlled, eliminating complex electronic sensor failures common in later tiers. Common repairs involve replacing the primary and secondary fuel filters to protect the injection pump. Inspect the turbocharger shaft play and charge cooler boot condition during the 1000-hour service. Check the alternator and starter load capacity, as the 95-amp alternator can fail under heavy hydraulic load. Replace worn GET teeth and bucket pins to maintain breakout force and cycle times.
Overhaul & Rebuild Points
The 2000-hour service mandates a full hydraulic oil change and tank cleaning to prevent contamination of the high-pressure relief valves (3650 psi). Inspect the torque converter transmission for slippage and replace the transmission filter. Check the immersed brake condition on the rear axle. Structural integrity checks of the mainframe, loader arm, and backhoe boom are critical. Measure swing ring play if the variant includes a swing mechanism. Address any unauthorized welding on the chassis immediately.
Seasonal & Environment Servicing
In cold climates, verify the cold start aid operation and use JCB Super Universal Agricultural oil for temperatures down to -15°C. Ensure the coolant mixture provides adequate freeze protection. In dusty environments, check the air filter restriction indicator frequently and clean the radiator fins to prevent overheating. Inspect the cab HVAC system and replace the cabin filter to maintain operator comfort. Store the machine under cover to protect the ROPS/FOPS structure and hydraulic hoses from UV degradation and weather damage.
4C-2 Turbo common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/400101 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 01/111100R | Engine, Imperial, 4.236 Compensated | Fuel system service | Check fitment → |
| 01/107400R | Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated | Fuel system service | Check fitment → |
| 02/100182 | Pipe, Assembly, Fuel, L/Pump To Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
4C-2 Turbo fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters or failing lift pump | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring short | Inspect sensor connector for corrosion and test circuit resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Verify oil level and test sensor signal output |
| P2047 | Reductant injector circuit open (SCR system fault) | DEF injector circuit failure or clogged nozzle | Inspect wiring harness and injector connections for damage |
| U0100 | Lost communication with Engine Control Module (ECM) | Loose battery terminals or damaged CAN bus wiring | Check battery voltage and inspect ground straps |
| P0236 | Turbocharger boost sensor circuit range/performance | Faulty boost pressure sensor or vacuum leak | Inspect turbo hoses for cracks and test sensor signal |
| P0190 | Fuel pressure sensor circuit malfunction | Faulty high-pressure fuel sensor | Check sensor connector pins for damage and test resistance |
| P0115 | Engine coolant temperature sensor circuit malfunction | Sensor failure or wiring open circuit | Test sensor resistance at operating temperature |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
4C-2 Turbo attachments & work tools
Buckets
JCB offers a range of buckets for the 4C-2 Turbo class, including general purpose, heavy duty, and trenching variants. Typical capacities for this size class range from 0.5 m³ (0.65 cu yd) to 1.4 m³ (1.83 cu yd) depending on the specific application and material density. These tools attach via the machine's standard quickhitch system for rapid changeover.
Quickhitches & Carriages
The machine utilizes a JCB-branded quickhitch coupler system designed for secure attachment of work tools. Material handling carriages with tilt functions are available to enhance versatility for pallet fork operations. These couplers integrate with the loader's self-levelling arm to maintain tool position during lifting.
Forks & Fork Frames
Pallet forks and fork frames are standard attachments for material handling tasks. They connect directly to the quickhitch or carriage interface, allowing for quick conversion from digging to lifting modes. Capacity ratings vary by configuration but are designed to complement the loader's lift curve.
Breakers
Hydraulic breakers are available for demolition and rock breaking applications. These tools require auxiliary hydraulic lines and a specific flow arrangement to operate effectively. The machine's hydraulic system must be configured to support the breaker's pressure and flow requirements.
Drills & Augers
Earth drills and augers are offered for post-hole digging and foundation work. Options include various bit diameters to suit different drilling depths and soil conditions. Hydraulic drive units connect to the machine's auxiliary circuits to provide rotational power.
Grabs & Grapples
Grapples and grabs are available for handling bulk materials, debris, or forestry applications. These tools often require specialized hydraulic circuits for gripping and tilting functions. The selection of grab type depends on the specific material being handled.
Specialist Attachments
JCB provides a range of specialist attachments for tough applications, including sweepers, patch planers, and lifting equipment. These tools often require specific hydraulic configurations or power take-off connections. The availability of specific specialist tools may vary by market and dealer inventory.
All 4C-2 Turbo assemblies by section
Every catalogued assembly group for the Jcb 4C-2 Turbo. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-1-1 Shovel
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***18 | Spacer | 4 |
A1-3-4 Fork Lift, Shovel Mounted, (42")
| 12***02 | Plate | 2 |
| 12***03 | Plate | 1 |
| 13***24 | Bolt | 2 |
A1-2-3 Shovel, Clam, 6 In 1, 1.1 Cu.Yd.
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-3-1 Fork Lift, Shovel Mounted
| 12***00 | Kit-Fork Lift, Shovel, Std | 1 |
| 12***00 | Fork | 4 |
| 12***01 | Gusset, Standard Shovel | 2 |
A1-3-2 Fork Lift, Shovel Mounted
| 12***00 | Fork, Lift, -3c/3cx/3d | 1 |
| 12***01 | Gusset | 4 |
| 12***00 | Fork | 2 |
A1-2-2 Shovel, Clam, 6 In 1, 1.2 Cu.Yd.
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-2-1 Shovel, Clam, 6 In 1, 1.0 Cu.Yd
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-3-3 Fork Lift, 6 In 1 Clam Shovel, Mounted (42")
| 12***00 | Fork, Shovel Mounted | 1 |
| 12***00 | Fork | 2 |
| 12***00 | Bracket | 2 |
A1-4-1 Crane Hook
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***39 | Attachment, Crane Hook Assembly, Fork Mounted | 1 |
A1-1-2 Bucket, Side Tip R/H
| 98***66 | Bucket, Lh Side Tip | 1 |
| 98***99 | Plate | 1 |
| 98***00 | Frame | 1 |
A1-1-3 Bucket, Side Tip L/H
| 98***66 | Bucket, Lh Side Tip | 1 |
| 98***99 | Plate | 1 |
| 98***00 | Frame | 1 |
A2-4-1 Bucket, Jaw, 460mm Wide, Jaw, 600mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-5-1 Attachments, Jaw Bucket
| 10***48 | Pin, Pivot | 1 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 6 |
A2-2-1 Attachments, Backhoe, Ripper Tooth,B.Blade, Bucket,Clay,Square Hole,T.Ditching
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-4-2 Bucket, Jaw, 305mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-1-2 Bucket
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt | 6 |
A2-1-1 Bucket
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt | 6 |
A2-3-1 Blade, Ditch Cleaning
| 13***12 | Bolt | 3 |
| 13***2Z | Bolt | 3 |
| 13***1Z | Nut | 0 |
A3-5-4 Breaker, Brh 250
| 12***87 | Bracket, Carrier | 1 |
| 16***18 | Adapter | 1 |
| 81***44 | Adapter | 1 |
A3-5-1 Powerbreaker
| 12***00 | Breaker, Power | 1 |
| 12***01 | Plate | 1 |
| 12***00 | Plate, Pivot | 1 |
A3-1-2 Roadbreaker, Installation, 4wd
| 10***06 | Lock; Supply 12***71 | 1 |
| 11***09 | Washer | 3 |
| 12***00 | Pipe | 1 |
A3-6-1 Powerbreaker Steels, Krupp
| 99***06 | Shaft | 1 |
| 99***07 | Pad, Pile Driving | 1 |
| 99***08 | Sleeve, Pile Driving | 1 |
A3-1-1 Roadbreaker, Installation, 2wd
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Carrier | 1 |
| 12***00 | Carrier | 1 |
A3-5-3 Breaker, Brh 125
| 90***00 | Breaker, Hydraulic | 1 |
| 90***01 | Screw | 10 |
| 90***02 | Accumulator, Assembly | 1 |
A3-2-1 Roadbreaker, Hose Reel
| 12***01 | Plate, Side | 2 |
| 12***02 | Plate | 1 |
| 12***03 | Block | 1 |
A3-5-2 Breaker, Brh 125, With Side Plates, Standard
| 10***51 | Spacer | 2 |
| 12***00 | Kit-Installation, Brh125 Breaker | 1 |
| 12***00 | Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., For Use On Normal Backhoe. Part Is Mss Use The Following Parts Marked B , Ie 1 Left Hand, 1 Right Hand Plate. | 1 |
A3-3-1 Roadbreaker, Stanley
| 12***00 | Breaker, Road | 1 |
| 12***01 | Handle | 1 |
| 12***02 | Grab | 1 |
A3-4-1 Roadbreaker, Steels, Stanley
| 99***14 | Pad, Rammer | 1 |
| 99***15 | Tool, Moil, Tool, Moil; 380mm Long Below Collar. 160mm (6 1/4") Long Above Collar | 1 |
| 99***16 | Tool, Chisel, Narrow | 1 |
A4-2-1 Highway Parts, Italian
| 12***00 | Strut, Jury | 1 |
| 12***00 | Strap | 1 |
| 12***01 | Washer | 2 |
A4-3-1 Front Mudguard, Swedish
| 12***01 | Guard, Mud | 2 |
| 12***02 | Strap | 4 |
| 12***00 | Platform, Lh | 1 |
A4-1-1 Tooth Guard
| 10***00 | Guard, Tooth | 1 |
| 11***00 | Cable, Control, With Plug | 1 |
| 12***00 | Guard, Tooth | 1 |
B Bodywork, Cab, Loader End
B1-5-1 Bonnet
| 12***00 | Hinge, Assemble | 2 |
| 12***00 | Stay | 1 |
| 12***00 | Stay, Assembly | 1 |
B1-1-1 Mainframe, 7'4" Sideshift
| 10***06 | Spacer | 1 |
| 10***19 | Boss | 1 |
| 11***09 | Washer | 8 |
B1-1-2 Mainframe, 8'0" Sideshift
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B1-1-6 Mainframe, 8'0" Sideshift, German, Swedish
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B1-1-4 Mainframe, Loader
| 11***09 | Washer | 4 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***00 | Grille | 1 |
B1-1-3 Mainframe, Centremount
| 11***09 | Washer | 8 |
| 12***00 | Grille | 1 |
| 12***02 | Guard, Mesh | 1 |
B1-1-5 Mainframe, 7'4" Sideshift, German, Swedish
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B1-3-1 Tank, Diesel Fuel, Fittings
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Cap, Filler | 1 |
| 12***00 | Tube, Filler | 1 |
B1-2-1 Tank, Hydraulic, Fitting
| 12***03 | Indicator | 1 |
| 12***05 | Indicator | 1 |
| 12***00 | Cover | 1 |
B1-4-1 Stabiliser, Sideshift
| 10***10 | Pin, Pivot | 1 |
| 10***37 | Pin, Pivot | 2 |
| 10***02 | Foot; Replaced By 12***66, See San04389 | 4 |
B1-4-3 Stabiliser, Centremount
| 10***30 | Pin, Pivot | 2 |
| 10***04 | Collar | 2 |
| 12***01 | Foot, Rubber | 2 |
B1-1-7 Mainframe, Centremount
| 12***00 | Grille | 1 |
| 12***02 | Guard, Mesh | 1 |
| 12***04 | Spacer | 4 |
B1-4-2 Stabiliser, Centremount
| 10***04 | Collar | 2 |
| 12***00 | Leg, Stabiliser | 2 |
| 12***00 | Leg, Stabiliser, Lh | 1 |
B2-4-1 Wash/Wipe, Windscreen
| 12***00 | Pump, And Reservoir | 1 |
| 12***01 | Jet | 1 |
| 12***00 | Pump, And Reservoir | 1 |
B2-1-1 Soundproofing, Cab Base
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***02 | Mat | 1 |
B2-5-5 Seat With Riser, Standard, German, Swedish, Optional, Uk & World
| 12***00 | Seat, Complete, Low Back | 1 |
| 12***14 | Spacer | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
B2-3-3 Cab
| 12***01 | Bracket, Interior Light | 1 |
| 12***02 | Cap | 4 |
| 12***05 | Bolt, Closing | 1 |
B2-6-1 Soundproofing, Engine
| 12***00 | Panel, Engine, Lh | 1 |
| 12***00 | Panel, Engine, Rh | 1 |
| 12***01 | Mat | 2 |
B2-5-2 9802/8000 B2-5-2
| 11***01 | Stop | 1 |
| 11***00 | Lever | 1 |
| 12***01 | Adapter | 1 |
B2-5-1 Basic Seat
| 12***00 | Housing | 1 |
| 12***00 | Riser, Seat, Assembly | 1 |
| 12***03 | Cushion | 1 |
B2-9-1 Window, Rear, Swedish
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 12***02 | Handle, Left Hand | 1 |
| 12***00 | Handle | 1 |
B2-3-2 Canopy
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 2 |
| 12***01 | Bracket | 1 |
B2-3-1 Cab Shell, Unglazed
| 12***00 | Roof, Swedish | 1 |
| 12***00 | Door, Lh | 1 |
| 12***00 | Door, Rh | 1 |
B2-2-1 Cab Glazing
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Cab, Assembly, With Glass | 1 |
| 12***00 | Cab, Assembly, With Glass | 1 |
B2-5-4 Seat - Optional, Swedish/German,U.K., & World
| 12***00 | Seat, Complete, Low Back | 1 |
| 12***00 | Seat | 1 |
| 40***00 | Seat, Suspension, Fabric | 2 |
B2-5-6 Seat Riser, Standard, German, Swedish, Optional, Uk & World
| 40***01 | Damper | 1 |
| 40***10 | Bracket | 1 |
| 40***11 | Lever | 1 |
B2-2-3 Cab Glazing, Swedish
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 2 |
| 12***01 | Bracket | 2 |
B2-2-2 Cab Glass
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 1 |
| 12***01 | Bracket | 1 |
B2-6-2 Soundproofing, Engine - Swedish
| 12***01 | Mat | 2 |
| 12***02 | Mat | 2 |
| 12***01 | Lug | 2 |
B2-3-4 Cab -, Swedish
| 12***01 | Bracket, Interior Light | 1 |
| 12***02 | Cap | 4 |
| 12***05 | Bolt, Closing | 2 |
B2-5-3 Basic Seat
| 12***10 | Cushion, Brown, Vinyl | 1 |
| 12***11 | Cushion, Brown, Vinyl | 1 |
| 12***00 | Lever | 1 |
B3-2-1 Arms, Loader, Parallel Lift
| 10***15 | Pin, Pivot, 165mm Long | 2 |
| 10***21 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 8 |
B3-1-1 Arms, Loader, Basic
| 10***15 | Pin, Pivot, 165mm Long | 4 |
| 10***21 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 6 |
B4-4-1 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-6-1 Dipper (Stick), Extending
| 10***25 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-3-1 Kingpost
| 10***16 | Pin, Pivot | 1 |
| 10***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-4-4 Boom
| 10***23 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 12***00 | Boom, 2200 M.M. Long | 1 |
B4-5-3 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***43 | Pin, Pivot | 1 |
B4-4-3 Boom
| 10***16 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-1-3 Kingpost Carriage, Centremount
| 12***05 | Pin, Lock | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Carriage | 1 |
B4-1-2 Kingpost Carriage, Centremount
| 12***05 | Pin, Lock | 1 |
| 12***13 | Shaft | 1 |
| 12***20 | Carriage | 1 |
B4-5-2 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-2-2 Slew/Swing, Components
| 12***06 | Bearing | 1 |
| 12***14 | Rack | 1 |
| 12***00 | Plate | 1 |
B4-2-1 Slew/Swing, Components
| 12***03 | Pin | 1 |
| 12***06 | Bearing | 1 |
| 12***12 | Gear, Pinion | 1 |
B4-1-1 Kingpost Carriage, Sideshift
| 12***05 | Pin, Lock | 1 |
| 12***07 | Plate | 1 |
| 12***13 | Shaft | 1 |
B4-5-1 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-6-2 Dipper (Stick), Extending
| 10***32 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-4-2 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-3-2 Kingpost
| 10***16 | Pin, Pivot | 1 |
| 11***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B5-1-1 Paint And Transfers
| 12***02 | Decal, Jcb, Side Door | 2 |
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 0 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 0 |
B5-3-1 Tool Kit, Supplementary
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
| 82***05 | Spanner, 11/16" X 3/4" A/F, D.O.E. | 1 |
B5-2-1 Tool Kit, Standard
| 27***00 | Bag, Tool | 1 |
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
B5-4-1 Fire Extinguisher
| 13***02 | Nut | 2 |
| 14***05 | Screw, Self Tapping | 2 |
| 25***00 | Extinguisher, Fire | 1 |
C Electrics-Machine, Cab & Engine
C1-3-2 Light, Head, Working
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***03 | Spring | 1 |
| 70***00 | Light, Working, 12 Volt | 2 |
C1-5-1 Pump, Diesel, Refuelling
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-2-1 Side & Rear Lights
| 10***01 | Spring, 24" Bungy | 1 |
| 70***00 | Light, Rear Fog | 1 |
| 70***00 | Light, Side Front, Supplied Without Bulbs | 2 |
C1-1-1 Electrical Equipment, Cab
| 12***01 | Cover, Front | 1 |
| 12***02 | Cover, Rear | 1 |
| 12***01 | Bracket | 2 |
C1-2-2 Side & Rear Lights
| 10***01 | Spring, 24" Bungy | 1 |
| 12***00 | Bracket, Rh | 1 |
| 12***00 | Bracket, Lh | 1 |
C1-4-1 Light, Side, Shovel Mounted, German & Swiss
| 12***00 | Bracket | 1 |
| 12***01 | Bracket, Swiss | 2 |
| 12***02 | Bracket, Reflector Mounting, German | 2 |
C1-4-2 Light, Side, Shovel Mounted, German & Swiss
| 12***01 | Bracket, Swiss | 1 |
| 12***02 | Bracket, Reflector Mounting, German | 1 |
| 12***00 | Bracket | 1 |
C1-3-1 Light, Head, Working
| 12***00 | Bracket | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
C2-5-1 Motor, Starter
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 70***01 | Bracket, Commutator End | 1 |
C2-5-3 Starter Motor, Type M127 - 12.Volt, Blmc 4.98 Engines, (Alternative)
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 3 |
C2-7-1 Warning System -, Powerbreaker
| 14***19 | Seal, Dowty | 1 |
| 24***12 | Grommet | 1 |
| 70***00 | Light, Warning | 1 |
C2-3-2 Alternator Mountings, 4.236 Engine
| 02***73 | Bracket, Alternator Mounting | 1 |
| 02***74 | Bracket, Alternator Support | 1 |
| 02***75 | Lever, Alternator Adjusting | 1 |
C2-5-5 Motor, Starter, M127 12.Volt, 4.236 Engines
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-6-3 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-6-4 Heater, Installation, Swedish
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-5-2 Motor, Starter, Service Option
| 71***00 | Motor, Starter | 1 |
| 71***01 | Bearing | 1 |
| 71***02 | Bracket, End | 1 |
C2-1-2 Electrics, Engine, Swedish
| 02***23 | Switch, Oil Pressure | 1 |
| 04***76 | Switch, Isolating | 1 |
| 04***99 | Switch, Neutral Start | 1 |
C2-4-2 Alternator
| 71***06 | Kit-Bearing, Drive End | 1 |
| 71***00 | Alternator; Lucas Ref 24037. Type Of Alternator Best Identified By Lucas Ref.Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref. Stamped On Tag At Pulley End., Alternator; Lucas Ref. 24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator | 1 |
| 71***01 | Cover | 1 |
C2-1-1 Electrics, Engine
| 02***23 | Switch, Oil Pressure | 1 |
| 04***76 | Switch, Isolating | 1 |
| 04***99 | Switch, Neutral Start | 1 |
C2-4-4 Alternator, A127-45amp 12.Volt, 4.236 Engines
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-6-2 Heater, Installation, Swedish
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-2-1 Battery 12v, Carrier, Standard
| 10***00 | Clamp | 1 |
| 12***01 | Tray | 1 |
| 12***02 | Tray | 1 |
C2-3-4 Alternator Mountings
| 02***76 | Spacer | 1 |
| 02***01 | Lever, Alternator Adjusting | 1 |
| 02***02 | Bracket, Alternator Mounting | 1 |
C2-6-1 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-3-3 Alternator Mountings
| 02***76 | Spacer | 1 |
| 02***92 | Washer | 3 |
| 02***43 | Bracket, Alternator Mounting | 1 |
C2-5-4 Motor, Starter, M127 12.Volt, 4.236 Engines
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Nut | 3 |
C2-4-1 Alternator
| 02***28 | Pulley | 1 |
| 71***01 | Regulator | 1 |
| 71***02 | Rotor, Assembly | 1 |
C2-4-3 Alternator, A127-45amp 12.Volt, Blmc 4.98 Engines
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-3-1 Alternator Mountings, 4.98nt Engine
| 02***88 | Bracket, Support | 1 |
| 02***89 | Tube, Spacer | 1 |
| 02***90 | Link, Adjusting | 1 |
C2-8-1 Installation, Reverse Alarm, Optional
| 13***02 | Nut, Lock | 1 |
| 14***14 | Washer, Star | 1 |
| 70***00 | Switch | 1 |
C3-1-1 Switch, Column
| 11***01 | Key, German | 2 |
| 12***09 | Cover | 1 |
| 12***12 | Cover | 1 |
C3-2-1 Instrument Panel
| 12***03 | Cover | 1 |
| 12***04 | Bracket | 1 |
| 12***06 | Cover | 1 |
C3-2-2 Instrument Panel
| 12***05 | Cover | 1 |
| 12***06 | Cover | 1 |
| 12***00 | Cable, Control | 1 |
D Controls-Machine, Engine
D1-3-1 Foot Pedal Controls, - Aux. Valve
| 12***00 | Lever | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Bracket | 1 |
D1-3-2 Foot Pedal Controls, - Aux. Valve
| 12***00 | Lever | 1 |
| 12***00 | Bracket | 1 |
| 12***01 | Bar, Locking | 1 |
D1-2-3 Controls, Excavator, Standard
| 10***01 | Knob, Large Dia. | 2 |
| 10***06 | Joint, Ball | 2 |
| 12***02 | Band, Retaining | 1 |
D1-2-1 Controls, Excavator, Standard
| 10***01 | Knob, Large Dia. | 2 |
| 10***05 | Joint, Universal | 1 |
| 10***06 | Joint, Ball | 1 |
D1-4-1 Installation, Shovel Reset
| 12***00 | Bracket | 1 |
| 12***01 | Bar | 1 |
| 12***02 | Bracket, Saddle | 2 |
D1-3-3 Foot Pedal Controls, - Aux. Valve
| 12***01 | Bar, Locking | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Bracket | 1 |
D1-1-2 Controls, Loader Valve, With Lever Lock
| 10***01 | Knob, Large Dia. | 1 |
| 10***05 | Joint, Universal | 2 |
| 10***06 | Joint, Ball | 1 |
D1-1-4 Controls, Loader Valve, With Lever Lock
| 10***01 | Knob, Large Dia. | 1 |
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
D1-1-3 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
D1-2-4 Controls, Excavator, Swedish
| 10***01 | Knob, Large Dia. | 2 |
| 10***06 | Joint, Ball | 2 |
| 12***02 | Band, Retaining | 1 |
D1-5-1 Lever Lock, Excavator Valve, Italian Build
| 12***00 | Kit-Lever Lock | 1 |
| 12***01 | Plate, Lock | 1 |
| 12***02 | Pin, Pivot | 1 |
D1-2-2 Controls, Excavator, Swedish
| 10***01 | Knob, Large Dia. | 2 |
| 10***05 | Joint, Universal | 1 |
| 10***06 | Joint, Ball | 1 |
D1-1-1 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***05 | Joint, Universal | 2 |
| 10***06 | Joint, Ball | 1 |
D2-1-1 Control Pedal, Brake
| 10***01 | Knob, Large Dia. | 1 |
| 12***04 | Pin, Pivot | 1 |
| 12***06 | Plate, Lock | 1 |
D2-2-1 Control, Parking Brake
| 12***05 | Bracket | 1 |
| 12***01 | Plate | 1 |
| 12***02 | Plate | 1 |
D3-1-4 Throttle Controls, 4.236 Engine, Swedish Builds
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 10***01 | Connector | 1 |
D3-2-1 Controls, Forward & Reverse, Transmission Dump
| 12***05 | Pin, Pivot | 1 |
| 12***00 | Pedal | 1 |
| 12***1P | Bracket | 1 |
D3-1-1 Throttle Controls, Blmc 4.98 Engine
| 02***82 | Spring | 1 |
| 10***00 | Bracket | 1 |
| 10***01 | Bracket | 1 |
D3-2-2 Controls, Forward & Reverse, Transmission Dump, 2/4wd Selector
| 12***00 | Pedal | 1 |
| 12***01 | Bracket | 1 |
| 12***02 | Bracket | 1 |
D3-1-2 Throttle Controls, Blmc 4.98 Engines, Swedish Builds
| 02***82 | Spring | 1 |
| 10***01 | Connector | 1 |
| 10***00 | Bracket | 1 |
D3-1-3 Throttle Controls, 4.236 Engine
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
E Hydraulics
E1-8-1 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-8-2 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-8-5 Hose & Pipework, Extended Dipper, Centremount Circuit
| 12***00 | Pipe, R.H | 1 |
| 12***00 | Pipe, L.H. | 1 |
| 12***00 | Pipe | 1 |
E1-5-5 Circuit, Backhoe, Standard Dipper, Centremount/7
| 12***00 | Pipe | 1 |
| 13***04 | Bolt | 2 |
| 13***03 | Nut | 1 |
E1-2-3 Circuit, Loader Arm, Basic
| 12***00 | Pipe, Assembly | 1 |
| 13***8Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
E1-4-1 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-9-1 Circuit, Auxiliary, Breaker Brh125, Standard Dipper
| 12***02 | Guide | 2 |
| 12***01 | Plate | 1 |
| 12***02 | Guide | 1 |
E1-3-1 Circuit, Auxiliary, Loader Arm, Basic
| 12***02 | Plate | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-3-4 Circuit, Auxiliary, Loader Arm, Self Level
| 13***08 | Bolt | 2 |
| 13***12 | Bolt | 1 |
| 14***03 | Washer | 3 |
E1-5-4 Circuit, Backhoe, Standard Dipper, Centremount/7
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 3 |
| 61***00 | Hose | 2 |
E1-4-8 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-5-3 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Hose | 1 |
| 13***03 | Nut | 2 |
E1-7-2 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***01 | Housing | 4 |
| 12***00 | Bracket, Support | 1 |
E1-4-5 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-3-2 Circuit, Auxiliary, Loader Arm, Self Level
| 12***02 | Plate | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-2-4 Hose And Pipework, Loader Arm, Self Level
| 12***00 | Pipe, Assembly | 1 |
| 13***08 | Bolt | 2 |
| 13***03 | Nut | 2 |
E1-2-1 Circuit, Loader Arm, Basic
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 13***14 | Bolt, Long | 4 |
E1-9-2 Circuit, Auxiliary, Breaker Brh125, Standard Dipper
| 12***02 | Guide | 2 |
| 12***01 | Plate | 1 |
| 12***02 | Guide | 1 |
E1-4-2 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-6-1 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe, Assembly | 1 |
| 12***00 | Pipe | 1 |
E1-8-4 Circuit, Backhoe, Extradig Dipper, Centremount 1550/1900
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 13***04 | Bolt | 2 |
E1-4-3 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-4-7 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-6-4 Circuit, Auxiliary, Backhoe, Standard Dipper, Centermount
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-4 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-6-7 Auxiliary Circuit, Hose And Pipework, Powerbreaker (Krupp)
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-6-5 Auxiliary Circuit, Powerbreaker
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-3-5 Circuit, Pole Planter, Installation
| 12***01 | Manifold | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Connector | 1 |
E1-7-1 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***05 | Seal | 1 |
| 12***01 | Housing | 4 |
E1-2-2 Circuit, Loader Arm, Self Level
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 13***08 | Bolt | 6 |
E1-1-1 Circuit, Neutral, Single Pump
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-5-2 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 1 |
| 61***00 | Hose, 1/4"Bsp X 1200mm | 2 |
E1-1-5 Neutral Circuit, Auxiliary Valve, Powerbreaker
| 13***05 | Bolt | 3 |
| 14***19 | Seal, Dowty | 1 |
| 14***26 | Washer, Seal | 2 |
E1-9-3 Circuit, Auxiliary, Hydraulic Breaker
| 14***11 | Seal, Bonded | 1 |
| 14***14 | Washer, Seal | 1 |
| 14***17 | Seal | 7 |
E1-5-1 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 2 |
| 61***00 | Hose | 2 |
E1-6-8 Hose And Pipework, Aux. Circuit, Powerbreaker
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-4-6 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-1-2 Circuit, Neutral, Twin Pump
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-3-3 Circuit, Auxiliary, Loader Arm, Basic
| 13***12 | Bolt | 1 |
| 14***03 | Washer | 1 |
| 14***06 | Washer | 1 |
E1-6-9 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift/7
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-1-3 Neutral Circuit, Loading Shovel
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-6-3 Circuit, Auxiliary, Backhoe, Standard Dipper, Centermount
| 12***07 | Guide | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-1-4 Circuit, Roadbreaker
| 12***02 | Plate | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
E1-6-6 Auxiliary Circuit, Powerbreaker
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-8-3 Circuit, Backhoe, Extradig Dipper, Centremount 1400/1600
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Pipe, Rh | 2 |
E1-6-2 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E2-1-1 Pump, Main Hydraulic, Single, Standard
| 13***10 | Bolt | 4 |
| 13***03 | Nut | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
E2-3-1 Shaft, Pump Drive
| 11***02 | Adapter, Drive | 1 |
| 12***02 | Adapter, Drive | 1 |
| 13***06 | Bolt | 4 |
E2-2-1 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***10 | Bolt | 4 |
| 13***14 | Bolt | 2 |
| 13***03 | Nut | 2 |
E3-4-1 Components, Auxiliary Valve
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 2 |
| 24***16 | O Ring | 1 |
E3-6-4 Valve, Rotary Clamp
| 14***11 | Seal, Bonded | 1 |
| 24***15 | O Ring | 1 |
| 92***54 | O Ring | 1 |
E3-6-3 Valve, Section, Excavator Valve, Seventh Spool
| 24***15 | O Ring | 1 |
| 24***11 | O Ring | 1 |
| 91***00 | Valve, Section, Assembly | 1 |
E3-2-2 Valve, Relief, Check & Overload, Loader Valve
| 13***02 | Nut | 1 |
| 24***07 | O Ring | 1 |
| 24***11 | O Ring | 2 |
E3-8-1 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***17 | Element, Spin-On Canister | 1 |
E3-5-2 Valve, Assembly, Excavator, Sideshift
| 12***00 | Restrictor | 2 |
| 13***34 | Bolt | 2 |
| 13***03 | Nut | 1 |
E3-5-3 Valve, Assembly, Excavator, Centremount, Sideshift
| 12***00 | Restrictor | 3 |
| 13***34 | Bolt | 1 |
| 13***36 | Bolt | 1 |
E3-2-4 Valve, Spool, Mechanical Detent, Loader Valve
| 24***05 | O Ring | 1 |
| 24***20 | O Ring | 2 |
| 24***07 | O Ring | 1 |
E3-2-1 Loader Valve M.R.V.
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 2 |
| 25***01 | Nut | 1 |
E3-2-3 Valve, Spool, Standard, Loader Valve
| 24***07 | O Ring | 2 |
| 25***09 | O Ring | 2 |
| 25***18 | Spacer | 2 |
E3-6-1 Valve, Components, Excavator
| 13***06 | Bolt | 12 |
| 24***14 | O Ring | 1 |
| 24***04 | O Ring | 1 |
E3-3-1 Valve, Auxiliary, & Adapters
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***04 | Adapter, Male/Male | 4 |
E3-2-6 Valve, Relief, Loader Valve
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
E3-2-5 Valve, Spool, Electric Detent, Loader Valve
| 24***07 | O Ring | 2 |
| 25***09 | O Ring | 2 |
| 25***18 | Spacer | 2 |
E3-1-1 Valve, Loader
| 12***01 | Mounting, Rubber | 3 |
| 13***30 | Bolt | 1 |
| 13***03 | Nut | 6 |
E3-5-1 Valve, Assembly, Excavator, Centremount
| 13***34 | Bolt | 1 |
| 13***01 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 12 |
E3-7-2 Filter -, Powerbreaker
| 32***00 | Filter | 1 |
| 32***01 | Element | 1 |
| 32***02 | Seal | 1 |
E3-6-2 Valve, Components, Excavator
| 24***07 | O Ring | 12 |
| 24***17 | O Ring | 7 |
| 92***22 | Seal, Wiper | 6 |
E3-7-1 Filter, Hydraulic
| 13***01 | Plug, Drain | 1 |
| 13***01 | Nut | 2 |
| 14***11 | Seal, Bonded | 1 |
E4-2-3 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-4 Ram, Stabiliser, Sideshift
| 55***01 | Cap, End | 1 |
| 55***02 | Head, Piston | 1 |
| 55***00 | Ram, Stabiliser, Sideshift; Standard. X= Early Type See E4-3-1. Y= Later Type See List Below., Ram, Stabiliser, Sideshift | 1 |
E4-6-3 Valve, Ram Lockout, Check
| 13***30 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
E4-7-1 Ram, Assembly, Service Exchange
E4-3-2 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-4-3 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-2-5 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 2 |
| 14***01 | Washer, Aluminium | 1 |
E4-5-2 Seal Kits, Extension Ram, Jaw Bucket
| 21***13 | Pin, Cotter, Split | 1 |
| 21***16 | Pin, Split | 1 |
| 24***26 | O Ring, 4.00in | 1 |
E4-1-1 Ram, Lift, Basic Loader Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-8-1 Ram, Side Tip Shovel
| 98***01 | Ram | 1 |
| 98***03 | Pin, Rod End | 1 |
| 98***09 | Rod, Piston | 1 |
E4-6-1 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 24***09 | O Ring | 1 |
| 24***13 | O Ring | 2 |
E4-2-8 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-2 Ram, Backhoe
| 12***15 | Bush | 2 |
| 12***21 | Bush | 2 |
| 12***17 | Bush | 2 |
E4-2-7 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-5 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***11 | Seal, Bonded | 4 |
E4-2-9 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-6 Ram, Stabiliser, Sideshift, With Check Valve
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E4-6-4 Valve, Check
| 13***06 | Bolt | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***04 | Washer | 2 |
E4-5-1 Seal Kits, Backhoe Rams
| 24***01 | O Ring | 1 |
| 24***15 | O Ring | 1 |
| 24***18 | O Ring | 1 |
E4-3-3 Ram Assy., Stabiliser With Chec, K Valve - Sideshift
| 55***01 | Head, Piston | 1 |
| 55***00 | Rod, Piston | 1 |
| 55***01 | Cap, End | 1 |
E4-4-2 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-2-1 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-1 Ram, Stabiliser, Sideshift
| 55***01 | Head, Piston | 1 |
| 55***00 | Rod, Piston | 1 |
| 55***01 | Cap, End | 1 |
E4-2-6 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-1-4 Ram, Lift, Selflevel Loader Arm
| 12***15 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-2-4 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-6-2 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***16 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E4-1-3 Ram, Lift, Basic Loader Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-4-1 Ram, Attachment
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 12***22 | Bush | 1 |
E4-1-2 Ram, Lift, Selflevel Loader Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-7 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***29 | Bracket | 2 |
F Axles, Wheels & Transmission
F1-1-1 Gearbox Housing
| 05***01 | Gasket | 1 |
| 05***02 | Cover; N.L.A. Recommend Customer Go'S To Used Parts, Dealer. B Borsley'S Requested This. | 1 |
| 05***03 | Bolt | 6 |
F1-2-1 Gear Change
| 05***16 | Rod | 1 |
| 05***17 | Spring | 1 |
| 05***18 | Ball | 2 |
F1-3-1 Gearbox Components
| 05***55 | Shim, 0.003in | 0 |
| 05***06 | Seal, Oil | 1 |
| 05***08 | Seal, Oil | 2 |
F1-4-1 Mountings, 498 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 1 |
| 12***00 | Mounting | 1 |
F1-4-2 Mountings, 4.236 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
F2-1-1 Transmission, Shuttle Reverser
| 04***47 | Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve., Lowing Parts 81***78 + 04/50***01 Ti Gen046. W When Fitting New Housing Please Order The Fol, Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve. | 1 |
| 04***48 | Sleeve | 1 |
| 04***49 | Ring, Spacer | 1 |
F2-4-1 Valve, Shuttle
| 04***58 | Spring | 1 |
| 04***59 | Valve, Assembly, Forward/Reverse | 1 |
| 04***61 | Seal | 1 |
F2-8-1 Filter
| 02***09 | Seal | 1 |
| 32***00 | Filter | 1 |
| 98***38 | Element, Oil Filter | 1 |
F2-7-1 Propshaft, Transmission Drive
| 13***12 | Bolt | 8 |
| 13***03 | Nut | 8 |
| 14***03 | Nipple, Grease | 1 |
F2-5-1 Flywheel & Housing, 498 Engine
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
F2-5-2 Flywheel & Housing, 4.236 Engine
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
F2-6-1 Circuit, Oil Cooler, Torque Converter
| 04***90 | Pipe; Use 04/50***04. | 1 |
| 04***91 | Elbow | 1 |
| 04***92 | Pipe | 1 |
F2-3-1 Clutch, Reverse, & Drive Pump
| 04***01 | Seal | 2 |
| 04***02 | Bearing | 1 |
| 04***03 | Carrier, Assembly | 1 |
F2-2-1 Forward Clutch
| 04***01 | Seal | 2 |
| 04***20 | Gear, Drive | 1 |
| 04***21 | Gear, Hub | 1 |
F3-4-1 Wheels & Tyres
| 10***01 | Nut | 1 |
| 41***00 | Wheel, 18.4/15x26 | 1 |
| 41***00 | Wheel, 14x28 | 1 |
F3-1-2 Axle Assembly, German, 24.494 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F3-1-1 Axle Assembly - Std., 18.295 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F3-3-2 Crown Wheel & Pinion, - German
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-3-1 Crown Wheel & Pinion, - Std.
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-3-3 Crown Wheel & Pinion
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-2-4 9802/8000 F3-2-4
| 13***05 | Bolt | 1 |
| 13***10 | Bolt | 1 |
| 14***06 | Washer | 1 |
F3-3-4 9802/8000 F3-3-4
| 13***08 | Bolt | 1 |
| 45***03 | Trunnion | 1 |
| 45***07 | Pin, Lock | 1 |
F3-2-3 Differential, Assembly
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F3-2-2 Differential, Assembly - German
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F3-2-1 Differential, Assembly
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F3-1-3 Axle Assembly, 15.587 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F4-2-1 Differential, Housing Assembly, 4wd
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F4-1-1 Axle Assembly, 4wd
| 10***01 | Nut | 16 |
| 13***09 | Bolt | 28 |
| 13***52 | Bolt | 4 |
F4-3-2 Crown Wheel & Pinion, 4wd - German
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F4-5-1 Wheels & Tyres, 4wd
| 10***14 | Nut | 1 |
| 10***15 | Washer | 1 |
| 10***01 | Nut | 26 |
F4-3-1 Crown Wheel & Pinion, 4wd
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F4-2-2 Differential, Housing Assembly, 4wd - German
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F4-4-1 Propshafts, Axle Drive 4wd
| 12***01 | Strap | 1 |
| 12***02 | Plate | 1 |
| 12***03 | Clip, Steady | 1 |
F4-1-2 Axle Assembly, 4wd, German
| 10***01 | Nut | 16 |
| 13***09 | Bolt | 28 |
| 13***52 | Bolt | 4 |
G Brakes
G1-3-1 Brake, Parking
| 13***10 | Bolt | 4 |
| 14***08 | Washer, Spring | 4 |
| 15***01 | Pivot, Seat; Replaced By Nla, See San 11411 | 1 |
G1-2-1 Brake Assembly
| 13***09 | Bolt | 16 |
| 13***07 | Capscrew | 12 |
| 45***01 | Plate, Back | 2 |
G1-1-1 Brake System
| 12***00 | Pipe, Rh | 1 |
| 12***00 | Pipe, Lh | 1 |
| 12***00 | Pipe, Rh | 1 |
H Steering
H1-6-1 Valve, Shock, Steering, Optional
| 13***10 | Screw, Cap | 2 |
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
H1-3-2 Steering Column
| 11***03 | Clip | 4 |
| 12***08 | Spacer | 2 |
| 12***01 | Wheel, Steering; Re J Smith Is Only Available From Manufacture, In Qty Of 500 Use 11***22, 11***08 | 1 |
H1-4-2 Pump, Steering, 4.236 Engine
| 12***02 | Gear | 1 |
| 13***12 | Bolt | 1 |
| 13***18 | Bolt | 2 |
H1-5-1 Valve, Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 2 |
| 16***10 | Adapter | 2 |
H1-4-1 Pump, Steering, 4.98nt Engine
| 03***02 | Pump, Steering | 1 |
| 13***30 | Bolt, Long | 4 |
| 14***06 | Washer | 4 |
H1-3-1 Steering Column
| 11***03 | Clip | 4 |
| 12***03 | Mounting | 1 |
| 12***06 | Washer, Grooved | 1 |
H1-7-1 Ram, Steering
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***56 | Circlip | 1 |
| 24***15 | O Ring | 1 |
H1-2-2 Circuit, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H1-7-2 Ram, Steering
| 13***10 | Bolt | 2 |
| 13***16 | Bolt | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-2-1 Circuit, Steering
| 14***11 | Seal, Bonded | 1 |
| 61***00 | Hose; See Note 1. Kit Is Supplied With Connection Hoses 61***00, Hose; See Note 1. Kit Is Supplied With Hoses 61***00, Hose | 2 |
| 61***00 | Hose | 1 |
H1-1-1 Axle Assembly Front, And Steering 2-Wd
| 12***01 | Pin, King | 2 |
| 12***02 | Pin, Cotter | 2 |
| 12***03 | Axle, Stub | 2 |
H2-8-1 Axle Assembly
| 12***01 | Pin, Lock | 2 |
| 13***28 | Bolt | 1 |
| 13***05 | Bolt | 2 |
H2-7-1 Circuit, Steering, 4wd
| 14***11 | Seal, Bonded | 1 |
| 61***00 | Hose | 2 |
| 61***00 | Hose | 1 |
H2-1-1 Axle Assembly Front, 4wd And Steering
| 10***00 | Axle, Assembly, Steering | 1 |
| 10***01 | Casing | 1 |
| 10***03 | Pin, Pivot | 2 |
H2-6-2 Ram, Steering, 4wd, Jcb Axle
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
| 24***06 | O Ring | 1 |
H2-4-1 Differential, Housing Assembly
| 10***01 | Housing | 1 |
| 10***02 | Bracket | 1 |
| 10***03 | Flange | 1 |
H2-3-1 Hub & Components
| 10***14 | Nut | 12 |
| 10***15 | Washer | 12 |
| 10***17 | Nipple | 4 |
H2-5-1 Differential, Assembly, 4wd Axle
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing | 1 |
| 10***02 | Flange | 1 |
H2-8-2 Knuckle, Steering, 4wd Axle
| 12***01 | Pin, Lock | 2 |
| 13***05 | Bolt | 2 |
| 13***08 | Bolt | 16 |
H2-6-1 Ram, Steering, 4wd, Front
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***56 | Circlip | 1 |
| 24***15 | O Ring | 1 |
H2-2-1 Knuckle, Steering, 4wd Axle
| 10***02 | Pin, King | 4 |
| 10***05 | Seal | 4 |
| 10***06 | Shim, 0.1 | 4 |
H2-8-4 Differential, Assembly, 4wd Axle
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing | 1 |
| 10***02 | Stud | 4 |
H2-7-2 Circuit, Steering, 4wd
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H2-8-3 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 32 |
| 13***08 | Bolt | 12 |
K Engine, Blmc 4.98nt
K1-6-1 Gears, Oil Pump Drive
| 02***10 | Washer | 1 |
| 02***11 | Spindle | 1 |
| 02***12 | Collar | 1 |
K1-4-1 Timing Case
| 02***08 | Casing, Timing | 1 |
| 02***09 | Cover, Timing | 1 |
| 02***10 | Plate, Lifting, Front | 1 |
K1-3-1 Crankshaft, Bearings, Pistons, Con-Rods, & Cylinder Liners
| 02***01 | Liner, Cylinder | 4 |
| 02***02 | Shim, 0.004in.(0.102mm) | 0 |
| 02***03 | Shim, 0.005in.(0.127mm) | 0 |
K1-1-1 Engine Basic
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
| 01***00 | Engine, Complete, 4.98tt Turbocharged | 1 |
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
K1-1-0 Engine Build, Identification
K1-5-1 Timing Gears
| 01***01 | Pulley, And Adapter | 1 |
| 02***01 | Block, Assembly, Cylinder | 1 |
| 02***02 | Belt, Drive | 1 |
K1-2-1 Block Assembly
| 02***94 | Tap, Drain | 1 |
| 02***00 | Block, Cylinder | 1 |
| 02***01 | Dowel, Hollow | 2 |
K1-7-1 Mountings, 4.98 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 1 |
| 12***00 | Mounting | 1 |
K1-8-1 Flywheel & Housing, 4.98 Engine
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
K2-1-0 Engine Build, Identification
K2-1-1 Cylinder Head
| 01***03 | Plate, Rear | 1 |
| 02***15 | Valve, Inlet | 4 |
| 02***16 | Valve, Exhaust | 4 |
K2-3-1 Covers, Rocker & Tappet
| 02***42 | Cover | 1 |
| 02***44 | Pipe, Vent | 1 |
| 02***45 | Cover, Tappet | 1 |
K2-4-1 Gasket Sets
| 81***04 | Gasket, Decarbonising | 1 |
| 81***05 | Kit-Gasket, Supplementary | 1 |
| 81***52 | Kit-Gasket, Decarbonising | 1 |
K2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***29 | Shaft, Rocker | 2 |
| 02***30 | Lever, Rocker | 8 |
| 02***31 | Spacer, 1/2in.(6.35mm) | 8 |
K2-1-2 Cylinder Head
| 01***03 | Plate, Rear | 1 |
| 02***16 | Valve, Exhaust | 4 |
| 02***20 | Holder, Collet | 8 |
K3-1-2 Manifold, Induction, Turbo
| 02***47 | Manifold | 1 |
| 02***02 | Pipe, Air Induction, Adapter | 1 |
| 02***03 | Hose, Air Induction | 1 |
K3-1-1 Manifold, Induction, Nat/Aspirated
| 02***46 | Adapter | 1 |
| 02***47 | Manifold | 1 |
| 12***01 | Plate, Adaptor | 1 |
K3-3-1 Manifold, Exhaust, & Silencer, Nat/Aspirated
| 02***50 | Manifold | 1 |
| 02***51 | Nut | 2 |
| 12***00 | Silencer | 1 |
K3-3-2 Manifold, Exhaust, & Silencer, Turbo
| 02***04 | Turbocharger | 1 |
| 02***05 | Manifold | 1 |
| 02***25 | Bolt | 4 |
K3-2-2 Filter, Air, Turbo
| 12***00 | Tube | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Tube | 1 |
K3-1-0 Engine Build, Identification
K3-2-1 Filter, Air, Nat/Aspirated
| 12***05 | Bracket | 1 |
| 13***06 | Bolt | 2 |
| 13***04 | Bolt | 4 |
K4-2-1 Radiator, Fittings & Mountings, Nat/Aspirated
| 11***03 | Bracket, Top | 1 |
| 11***04 | Guard, Right Hand | 1 |
| 11***05 | Guard, Left Hand | 1 |
K4-2-2 Radiator, Fittings & Mountings, Turbo
| 11***03 | Bracket, Top | 1 |
| 11***04 | Guard, Right Hand | 1 |
| 11***05 | Guard, Left Hand | 1 |
K4-3-1 Radiator, Hoses & Fittings, Nat/Aspirated
| 02***02 | Belt, Drive | 1 |
| 02***43 | Hose, By-Pass, L Shaped | 1 |
| 12***02 | Tube | 1 |
K4-3-2 Radiator, Hoses & Fittings, Turbo
| 02***02 | Belt, Drive | 1 |
| 02***43 | Hose, By-Pass, L Shaped | 1 |
| 02***43 | Hose | 1 |
K4-4-1 Thermostat, Housing, Inlet & Outlet
| 02***55 | Connector, Outlet | 1 |
| 02***56 | Thermostat, 82 Degree C | 1 |
| 02***57 | Thermostat, 74 Degree C | 1 |
K4-1-2 Pump, Water
| 02***52 | Pulley | 1 |
| 02***54 | Body | 1 |
| 02***45 | Pulley | 1 |
K4-1-0 Engine Build, Identification
K4-4-2 Thermostat, Housing, Inlet & Outlet
| 02***56 | Thermostat, 82 Degree C | 1 |
| 02***57 | Thermostat, 74 Degree C | 1 |
| 02***58 | Housing, Thermostat | 1 |
K4-1-1 Pump, Water
| 02***52 | Pulley | 1 |
| 02***53 | Spacer, Distance Piece | 1 |
| 02***54 | Body | 1 |
K5-5-1 Cooler, Oil Filter, Turbocharger Pipework
| 02***42 | Element, Oil Filter | 1 |
| 02***06 | Pipe, Turbo Oil Feed | 1 |
| 02***07 | Hose, Turbo Oil Feed | 1 |
K5-4-1 Oil Feed Pipework
| 02***67 | Pipe, Overflow | 1 |
| 02***68 | Pipe | 1 |
| 02***04 | Pipe | 1 |
K5-2-1 Pump, Oil
| 02***62 | Shim, .002in (0.51mm) | 0 |
| 02***63 | Shim, .003in.(.076mm) | 0 |
| 02***64 | Pipe, Suction | 1 |
K5-1-0 Engine Build, Identification
K5-3-1 Filter, Oil
| 02***01 | Bolt | 1 |
| 02***02 | Collar | 1 |
| 02***03 | Seal | 1 |
K5-1-1 Sump, Oil
| 02***59 | Sump | 1 |
| 02***60 | Dipstick | 1 |
| 02***61 | Tube, Guide | 1 |
K5-2-2 Pump, Oil
| 02***62 | Shim, .002in (0.51mm) | 0 |
| 02***63 | Shim, .003in.(.076mm) | 0 |
| 02***64 | Pipe, Suction | 1 |
K6-4-2 Pump, Fuel Lift
| 17***00 | Pump, Fuel Lift | 1 |
| 17***11 | Kit-Repair | 1 |
| 17***12 | Kit-Seal | 1 |
K6-5-1 Filter, Fuel, Long
| 13***16 | Bolt | 2 |
| 13***01 | Nut | 2 |
| 14***03 | Washer | 2 |
K6-1-0 Engine Build, Identification
K6-4-1 Pump, Fuel Lift
| 12***00 | Rod, Pull | 1 |
| 13***03 | Screw, 1/4 Unf X .625 | 1 |
| 13***06 | Bolt | 1 |
K6-5-2 Filter, Fuel, Short
| 20***06 | Seal | 2 |
| 20***07 | Bolt, Centre | 1 |
| 20***08 | Washer | 1 |
K6-3-1 Injectors, Fuel
| 13***09 | Bolt | 2 |
| 14***05 | Washer; Replaces 82***03 | 2 |
| 17***05 | Nut | 1 |
K6-2-1 Pump, Fuel Injection, Installation
| 02***77 | Bracket, Support | 1 |
| 02***78 | Plug | 1 |
| 02***79 | Hub | 1 |
K6-1-1 Fuel System
| 02***73 | Clamp | 2 |
| 02***74 | Pipe, Nylon | 1 |
| 02***75 | Clip | 1 |
K6-6-1 Filter, Fuel Sediment
| 13***03 | Nut | 2 |
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
L Engine, 4.236
L1-2-3 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Lj Build
| 02***38 | Key | 1 |
| 02***27 | Bolt | 1 |
| 02***28 | Nut | 1 |
L1-8-1 Short Engine
| 02***25 | Engine, Short, Imperial | 1 |
L1-1-1 Block Assembly, Imperial, Ld & Lh Builds
| 02***16 | Bolt, 89mm | 6 |
| 02***17 | Bolt, 105mm | 12 |
| 02***01 | Thimble | 10 |
L1-7-2 Engine, Complete, Lh Build
| 01***00 | Engine, Imperial, Complete, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated; & 1, Lh50205. Fuel Filter & Pipework,Fan Belt,Outlet Connection & Inlet/Exhaust Manifolds., Engine, Imperial, 4.236 Compensated | 1 |
L1-8-3 Engine, Short, Imperial, Lh & Lj Builds
| 02***09 | Engine, Short, Imperial | 1 |
L1-7-3 Engine, Complete, Lj Build
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged | 1 |
| 01***0R | Engine, Imperial, 4.236 Turbocharged | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Superseded By N.S.P. Part No Longer Available Use 01/11***00 And Refer To T.I.K135/H, K129/E., Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 S/Seded By N.S.P. Part No Longer Available Use 02/11***00 And Refer To T.I.K135/H - K129/E., Engine, Imperial, Complete, 4.236 Turbocharged, Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Supersede By N.S.P. Part No Longer Available, Use 01/11***00 And Refer To T.I.K135/H K129/E. | 1 |
L1-3-1 Timing Case, Camshaft & Gears, Ld & Lh Builds
| 02***02 | Casing, Timing | 1 |
| 02***03 | Cover, Timing | 0 |
| 02***04 | Seal, Front Oil | 0 |
L1-3-2 Timing Case, Camshaft & Gears, Lj Build
| 02***02 | Casing, Timing | 1 |
| 02***05 | Gasket, Timing Case | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
L1-4-1 Flywheel & Housing, Ld,Lh & Lj Builds
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
L1-7-1 Engine, Complete, Ld Build
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
| 01***0R | Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated; See Note 2. Fuel Filter & Pipework, Fan Belt, Thermostat,Outlet Connection & Inlet, Exhaust Manifolds. | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
L1-6-1 Engine Mountings, Ld,Lh & Lj Builds
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
L1-2-1 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Ld & Lh Builds
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***08 | Piston, Assembly, Oversize - .030inch | 4 |
| 02***09 | Kit-Piston Ring | 4 |
L1-1-3 Block Assembly, Imperial, Lj Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***03 | Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip-Fit Type., Liner, Press Fit, Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip Fit Type., Liner, Press Fit; Flame Ring Type. This Requires Specialised Tools For Fitting, For General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing,For General Service Use Slip-Fit., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Refer To Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. This Requires Specialised Tools For Fitting, For General Service, Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type. | 4 |
L2-3-2 Rocker Assembly, Push Rods & Tappets, Ld, Lh & Lj Builds
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-1-3 Cylinder Head, Ld & Lh Builds
| 02***24 | Collet | 8 |
| 02***26 | O Ring; Exhaust. Used Only With Cylinder Heads 02/10***82 And 02/10***24., O Ring, O Ring; Inlet & Exhaust. No Longer Required | 4 |
| 02***48 | Plug | 1 |
L2-1-2 Cylinder Head, Lj Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***20 | Seat, Spring | 8 |
L2-2-1 Rocker Cover, Ld Build
| 02***35 | Cover, Rocker | 1 |
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***80 | Pipe | 1 |
L2-4-1 Turbo, Heatshield, Lh & Lj Builds
| 02***15 | Guard, Heat | 1 |
| 02***00 | Guard, Heat | 1 |
| 02***80 | Shield, Heat | 1 |
L2-3-1 Rocker Assembly, Push Rods & Tappets, Ld Build
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-1-4 Cylinder Head, Lj Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***21 | Holder, Collet | 8 |
L2-1-1 Cylinder Head, Ld Build
| 02***14 | Head, Assembly, Cylinder | 1 |
| 02***15 | Nut | 2 |
| 02***18 | Spring, Valve, Inner | 8 |
L2-2-2 Rocker Cover, Lh & Lj Builds
| 02***37 | Cap, Oil Filler | 1 |
| 02***80 | Pipe | 1 |
| 02***22 | Seal | 1 |
L3-1-2 Manifold, Induction, Lh & Lj Builds
| 02***16 | Manifold, Induction | 1 |
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
L3-5-1 Silencer & Extension, Ld Build
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust Extension | 2 |
L3-4-6 Filter, Air, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Hose, Assembly, Induction | 1 |
| 12***01 | Hose, Induction Elbow | 1 |
L3-1-1 Manifold, Induction, Ld Build
| 02***45 | Manifold, Induction | 1 |
| 02***46 | Gasket | 1 |
| 02***47 | Gasket | 1 |
L3-5-6 Silencer & Extension, Lh & Lj Builds
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust | 1 |
L3-4-8 Filter, Air, Ld Build
| 12***02 | Bracket | 1 |
| 13***04 | Bolt | 2 |
| 13***10 | Bolt | 1 |
L3-2-2 Manifold, Exhaust, Lh & Lj Builds
| 02***50 | Gasket | 1 |
| 02***51 | Nut | 4 |
| 02***17 | Manifold, Exhaust | 1 |
L3-2-1 Manifold, Exhaust, Ld Build
| 02***49 | Manifold, Exhaust | 1 |
| 02***50 | Gasket | 2 |
| 02***51 | Nut | 4 |
L3-4-1 Filter, Air, Ld Build
| 12***00 | Bracket, Air Filter Mounting | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pad, Mounting | 4 |
L4-4-7 Radiator, Hoses & Fittings, Ld Build
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
L4-1-4 Pump, Water, Lh & Lj Builds
| 02***67 | Gasket | 1 |
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
L4-3-3 Thermostat, Housing, Inlet & Outlet, Lh & Lj Builds
| 02***95 | Plug, Taper | 2 |
| 02***99 | Gasket | 1 |
| 02***59 | Connector, Water Outlet | 1 |
L4-1-1 Pump, Water, Ld Build
| 02***66 | Pump, Water | 1 |
| 02***67 | Gasket | 1 |
| 02***70 | Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7,9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump, Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1. & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit., Kit-Repair, Water Pump; Contains Items 3,4,5,6,7,8,9,10,11,12,13 & 27. Items 7,8,9 & 11, Repaired And Replaced By K It 02/10***87., Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 Are No Longer Required, Repaired And Replaced By Kit 02/10***87. | 1 |
L4-1-3 Pump, Water, Lh & Lj Builds
| 02***67 | Gasket | 1 |
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
L4-4-6 Radiator, Hoses & Fittings, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
L4-3-1 Thermostat, Housing, Inlet & Outlet, Ld Build
| 02***71 | Thermostat | 1 |
| 02***98 | Housing, Thermostat | 1 |
| 02***99 | Gasket | 1 |
L4-4-1 Radiator & Hoses
| 12***02 | Tube | 1 |
| 12***00 | Bottle, Expansion | 1 |
| 12***02 | Cap, Filler | 1 |
L5-1-1 Sump, Oil Pump, & Fittings, Ld,Lh & Lj Builds
| 02***59 | Sump, Oil | 1 |
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
L5-2-3 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 1 |
| 02***71 | Head, Filter | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
L5-2-4 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 0 |
| 02***71 | Head, Filter | 0 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 0 |
L5-2-1 Filter, Oil, Ld Build
| 02***63 | Gasket | 1 |
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***71 | Head, Filter | 1 |
L6-1-1 Fuel Injection, Equipment, Ld & Lh Builds
| 02***53 | Washer | 4 |
| 02***54 | Pipe, No.1 Cylinder | 1 |
| 02***55 | Pipe, No.2 Cylinder | 1 |
L6-9-1 Fuel System, Ld & Lh Builds
| 02***82 | Pipe, Assembly, Fuel, L/Pump To Filter | 1 |
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
L6-7-1 Filter, Fuel, Ld,Lh & Lj Builds
| 02***89 | Bracket | 1 |
| 02***94 | Banjo | 1 |
| 02***95 | Valve, Non-Return | 1 |
L6-6-1 Filter, Fuel Sediment, Ld,Lh & Lj Builds
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
L6-3-1 Controls, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
L6-2-1 Bracket, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 02***90 | Bracket | 2 |
L6-3-2 Controls, Throttle & Stop, Swedish Builds
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 10***01 | Connector | 1 |
L6-1-3 Fuel Injection, Equipment, Lj Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 3 |
L6-4-2 Pump, Fuel Lift, Alternative
| 17***12 | Kit-Seal | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
| 17***19 | Kit-Repair, Fuel Lift Pump | 1 |
L6-4-1 Pump, Fuel Lift, Ld,Lh & Lj Builds
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***98 | Screw | 1 |
L6-1-4 Pump, Fuel Injection, Lj Build
| 17***00 | Pump, Fuel Injection; 0r 3241f881 If Totally Stuck Use 3348f212 To, Modify And Recalibrate To Make 3241f790 | 1 |
| 17***02 | Screw | 1 |
| 17***03 | Nut | 3 |
L6-9-6 Fuel System, Lj Build
| 02***82 | Pipe, Assembly, Fuel, L/Pump To Filter | 1 |
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
L6-1-2 Pump, Fuel Injection, Ld & Lh Builds
| 17***00 | Pump, Fuel Injection | 1 |
| 17***00 | Pump, Fuel Injection | 1 |
| 17***02 | Screw | 1 |
L8-2-2 Turbocharger, Lh & Lj Builds
| 02***56 | Turbocharger | 1 |
| 02***57 | Housing, Assembly, Centre | 1 |
| 02***58 | Nut, Lock | 1 |
L8-3-2 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***87 | Olive | 1 |
| 02***10 | Washer | 4 |
L8-3-3 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
L9-2-2 Kit, Engine Overhaul, Lh Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***20 | Kit-Piston Ring | 4 |
| 02***35 | Seal, Front Oil | 1 |
L9-2-3 Kit, Engine Overhaul, Lj Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
L9-2-1 Kit, Engine Overhaul, Ld Build
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
L9-1-1 Gaskets Sets
| 02***66 | Kit-Gasket, Bottom | 1 |
| 02***87 | Kit-Gasket, Top | 1 |
| 02***88 | Kit-Gasket, Bottom | 1 |
L9-1-2 Gasket Sets, Turbo Engine
| 02***97 | Kit-Gasket, Top | 1 |
| 02***98 | Kit-Gasket, Bottom | 1 |
| 02***89 | Kit-Gasket, Top; Lh50133,Lh50205 & Lj50183. Refer To Service Workshop Manual, Kit-Gasket, Top | 1 |
Frequently asked questions
What engine does the JCB 4C-2 Turbo use?
The JCB 4C-2 Turbo uses a 4.4-liter, four-cylinder, turbocharged Dieselmax or EcoMAX engine (variant 444), delivering 74 kW (100 hp) net power.
What is the operating weight of the JCB 4C-2 Turbo?
Operating weight varies by configuration, ranging from 8,722 kg (19,229 lb) for lighter setups to 13,063 kg (28,798 lb) for heavier configurations with counterweights and attachments.
What model replaced the JCB 4C-2 Turbo?
The 4C-2 Turbo was succeeded by the JCB 4CX Max and later the 4CX Plus generations within the 4CX family line.
What 4C-2 Turbo owners discuss
What engine family and generation does the JCB 4C-2 Turbo utilize, and what are the common failure modes for that generation?
The machine uses the JCB 444 engine family. Early Dieselmax variants (Tier 2 and early Tier 3) are prone to big end bearing failures on the crankshaft, particularly if oil change intervals are stretched. Later Tier 4i and T4 Final EcoMax variants tend to suffer from injector faults and general wear due to the sensitivity of common rail fuel systems to fuel quality. Injection pump failures are also common on early mechanical and early electronic engines. Have your dealer verify the specific engine tier and inspect the crankshaft bearings if the machine has high hours or poor maintenance history.
What are the typical hydraulic and powertrain behaviors associated with this machine type?
The machine features a full power hydrostatic system utilizing the main hydraulic pump with an integral steering priority valve. The transmission relies on microswitches activated by the forward/reverse lever to control hydraulic solenoids on the transmission body. Intermittent forward or reverse operation is a known issue often caused by electrical faults in these microswitches or solenoids rather than hydraulic failure. The system is designed for heavy-duty one-piece mainframe operation with componentised driveline.
What undercarriage or wear patterns are typical for this machine class?
As a backhoe loader, the machine utilizes specific front and rear axles designed for backhoe applications that accept a wide variety of tyre combinations. Undercarriage wear is not applicable as the machine uses tyres; however, the front and rear axle housings and hubs require specific lubrication. The machine is built with a heavy-duty one-piece mainframe and componentised driveline to withstand the stress of simultaneous loader and backhoe operations. Ground pressure and tyre selection significantly impact jobsite fit and wear.
What are the common electrical and sensor issues reported for this machine?
Starting problems are the single most common reason owners seek help, often stemming from flat batteries or fuel system faults rather than electrical issues. However, electrical faults can cause intermittent movement issues via the forward/reverse lever microswitches. On later common rail engines, sensor faults can prevent the ECU from allowing the engine to run, requiring diagnostic software to read fault codes. Coolant sensor readings should be reality-checked against actual temperature, as sensor drift can occur. Have your dealer verify the integrity of the earth strap connection to the block and the condition of the battery terminals.
What specific checks should be performed when buying a used JCB 4C-2 Turbo?
Check the turbocharger for excessive play in the shaft by removing the intake pipe and feeling for movement in the compressor wheel. Inspect the intake and exhaust hoses for splits or loose clamps. Verify the engine tier and part number (format the OEM part reference) to identify the correct fuel system type (mechanical vs. common rail). Check for brown sludge in the coolant expansion bottle, which indicates silicate separation and overdue coolant changes. Ensure the machine has the correct service manual for its specific serial number range, as manuals for different ranges are not interchangeable. Have your dealer verify the engine serial number and chassis PIN match the build records.
What fluid specifications and capacities are critical for this machine?
The machine requires JCB branded fluids or verified equivalents. The engine oil specification is JCB 15W/40 Multigrade for temperatures between -10°C to 50°C (14°F to 122°F). The hydraulic system uses genuine JCB hydraulic oil featuring high quality base oils and additive technology. The coolant is an OAT (Organic Acid Technology) type designed for heat transfer efficiency and corrosion protection. The fuel tank capacity is 83.2 litres (18.3 UK gal). Coolant must be changed at recommended service intervals to prevent silicate separation and brown sludge formation. Have your dealer verify the exact fluid capacities for the specific transmission and axle configurations.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 4C-2 Turbo. Related factory variants of the same model family:
4C-2 Turbo
Need a specific 4C-2 Turbo part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.