JCBagriculturalwheeled loaders
Jcb 446
Maintenance schedule, common problems & OEM parts breakdown
The JCB 446 is a wheeled loading shovel (wheel loader) manufactured from 2001 to 2005. It is powered by a 6-cylinder, turbocharged Cummins 6CT8.3C engine producing 185 hp (138.0 kW) net power. The machine weighs approximately 20,633.9 kg (45,490 lbs) and features a power shift transmission with 4 forward and 3 reverse gears. Configurations include the standard 446 and the high-lift 446ZX variant. The 446ZX offers a tipping capacity of 10,432.6 kg (23,000 lbs) and a heaped bucket capacity of 3.1 m³ (4.1 cu yds).
The 446 replaced earlier models in the JCB wheeled loader lineup and was succeeded by the 456 series. The machine is significant in the used market due to its robust Cummins engine and JCB’s extended 500-hour oil change interval, which reduces downtime compared to competitors. The 446ZX high-lift configuration remains popular for quarry and aggregate handling where dump clearance is critical. Parts availability is supported by the shared service manual (the OEM part reference-10) with the 456, facilitating easier maintenance for fleet operators.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 446 specifications
Engine
| Model | 6CT8.3C |
| Cylinders | 6 |
| Displacement | 506.5 cu in. (8300.1 cc) |
| Aspiration | Turbocharged |
| Gross Power | 193 hp (143.9 kW) |
| Net Power | 185 hp (138.0 kW) |
| Rated Speed | 2200 RPM |
| Peak Torque | 665.3 lbs ft (902.0 N-m) |
| Torque Speed | 1400 RPM |
Weights
| Operating Weight | 45490 lbs (20633.9 kg) |
| Tipping Capacity | 23000 lbs (10432.6 kg) |
Dimensions
| Overall Length | 312 in (792.5 cm) |
| Width Over Tires | 108 in (274.3 cm) |
| Wheelbase | 132 in (335.3 cm) |
| Ground Clearance | 24 in (61.0 cm) |
| Turning Radius | 264 in (670.6 cm) |
| Bucket Hinge Pin Height | 156 in (396.2 cm) |
| Cab Height | 132 in (335.3 cm) |
| Bucket Width | 108 in (274.3 cm) |
Performance
| Max Speed (Forward) | 23.3 mph (37.5 km/h) |
| Max Speed (Reverse) | 15.2 mph (24.5 km/h) |
| Breakout Force | 38670 lbs (17540.4 kg) |
| Bucket Capacity (Heaped) | 4.1 cu yds (3.1 m³) |
| Bucket Capacity (Struck) | 3.7 cu yds (2.8 m³) |
| Raise Lift Arms Time | 5.8 sec |
| Lower Lift Time | 4.1 sec |
| Bucket Dump Time | 1.2 sec |
| Reach At Max Lift And Dump | 48 in (121.9 cm) |
| Dump Clearance At Max Raise | 108 in (274.3 cm) |
| Rear Axle Oscillation | 25° |
| Transmission Type | Power shift |
| Forward Gears | 4 |
| Reverse Gears | 3 |
| Pump Type | Twin variable displacement piston pump |
| Pump Flow | 43.1 GPM (163.2 LPM) |
| Relief Pressure | 3625 psi (249.9 bar) |
Service capacities (summary)
| Fuel Tank Capacity | 84.6 gal (320.2 l) |
| Engine Oil Capacity | 5 gal (18.9 l) |
| Cooling System Capacity | 10.6 gal (40.1 l) |
| Hydraulic System Capacity | 56.8 gal (215.0 l) |
| Transmission Oil Capacity | 9 gal (34.1 l) |
| Differential Front Capacity | 18.3 gal (69.3 l) |
| Differential Rear Capacity | 13.5 gal (51.1 l) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
446 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 18.9 l (5 gal) | JCB engine oil (non-DPF) or JCB Advanced engine oil (DPF); viscosity per ambient temperature |
| Cooling system | 40.1 l (10.6 gal) | JCB engine coolant (silicate-based); change at recommended intervals to prevent silicate separation |
| Fuel tank | 320.2 l (84.6 gal) | Standard diesel fuel |
| Transmission | 34.1 l (9 gal) | JCB transmission oil (multipurpose for transmissions and wet brakes) |
| Hydraulic system and tank | 215.0 l (56.8 gal) | JCB hydraulic oil (high anti-wear, thermal stability, demulsibility) |
| Front differential | 69.3 l (18.3 gal) | JCB gear oil (for axles and oil-immersed brakes) |
| Rear differential | 51.1 l (13.5 gal) | JCB gear oil (for axles and oil-immersed brakes) |
| Grease | N/A | JCB grease (boom grease or blue grease; high load capacity, long-life protection) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 446 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 446 beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, collect oil samples from the engine, hydraulic system, front axle, and rear axle to establish a baseline. JCB engines do not use DEF or DPF, allowing for extended 500-hour oil changes using JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specs. Monitor hydraulic return filter magnets for metallic debris during filter replacement. Use JCB-spec long-life coolant for the 1000-hour change to prevent corrosion in the 40.1 L (10.6 gal) cooling system. Regular fluid analysis prevents premature wear in the twin variable displacement piston pumps.
Corrective & Common Repairs
Common issues include turbocharger boot leaks and wastegate malfunction on the 6CT8.3C engine; inspect these at the 1000-hour service. Check alternator and starter load to prevent electrical failures. Inspect immersed brake discs on the 446ZX for wear. The power shift transmission requires specific oil changes every 1000 hours to maintain smooth gear engagement. Verify belt tension on the alternator, A/C, and fan drives to prevent overheating. Address hydraulic hose chafing at the kingpost and boom pivots during daily checks to avoid high-pressure leaks.
Overhaul & Rebuild Points
The 2000-hour deep service includes a full hydraulic oil change and tank cleaning to remove sediment. Inspect the chassis, side frames, and loader arm for structural cracks or unauthorized welding. Measure swing ring play if applicable to related models, though the 446 is wheeled. Check injector spray patterns via diagnostic tool to ensure efficient combustion. The 6CT8.3C engine requires precise torque settings for dry threads; reduce lubricated thread torque by one-third. Structural integrity checks are critical for the 446ZX high-lift configuration due to increased leverage on the frame.
Seasonal & Environment Servicing
In cold climates, ensure the 40.1 L (10.6 gal) cooling system is protected against freezing. Check battery electrolyte levels in non-sealed units and clean terminals. In dusty environments, monitor the air filter restriction indicator closely and replace the primary element at 500 hours. Inspect the fuel water separator daily to prevent water contamination in the common-rail injectors. Verify tire pressure and cut damage on the 23.5R25 HXA (L3) tires. Ensure the ROPS/FOPS dataplate is intact and all safety devices, including backup alarms and fire extinguishers, are functional.
446 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/914200 | Filter, Fuel Sedimentor | Fuel system service | Check fitment → |
| 02/910150 | Element, Fuel Filter, Water Seperator | Fuel system service | Check fitment → |
| 02/910155 | Element, Fuel Filter, Cartridge | Fuel system service | Check fitment → |
| 581/18071 | Filter, Assembly, Hydraulic | Scheduled service item | Check fitment → |
| 331/16893 | Plate, Recirculation Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
446 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel Rail/System Pressure Too Low | Clogged fuel filters, failing lift pump, or restricted fuel line. | Check fuel filter condition and fuel supply pressure. |
| P0117 | Engine Coolant Temperature Sensor Circuit Low Voltage | Faulty coolant temperature sensor, shorted wiring harness, or poor connector contact. | Inspect sensor wiring for damage and check connector pins for corrosion. |
| P0521 | Engine Oil Pressure Sensor Range/Performance Issue | Faulty oil pressure sensor or erratic signal from the sensor circuit. | Verify oil pressure with a mechanical gauge and inspect sensor electrical connections. |
| P2047 | Reductant Injector Circuit Open (SCR System) | Open circuit in the DEF/AdBlue injector wiring or faulty injector solenoid. | Inspect the reductant injector harness and connector for damage or disconnection. |
| U0100 | Lost Communication with Engine Control Module (CAN Bus) | Damaged CAN bus wiring, poor ground connection, or low battery voltage. | Check battery voltage, inspect ground straps, and verify CAN bus connector integrity. |
| 101 | Low Transmission Clutch Pressure | Hydraulic system issue, low transmission fluid, or faulty pressure sensor. | Check transmission fluid level and inspect hydraulic lines for leaks. |
| P0335 | Crankshaft Position Sensor 'A' Circuit (No Signal) | Failed crank sensor, damaged wiring, or debris on the sensor pickup. | Inspect the crank sensor and its wiring harness for physical damage. |
| P0112 | Intake Air Temperature Sensor Malfunction (Low Voltage) | Short to ground in the IAT sensor circuit or faulty sensor. | Check the intake air temperature sensor connector and wiring for shorts. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
446 attachments & work tools
Standard Buckets
The JCB 446ZX is equipped with a standard heavy-duty bucket with a struck capacity of 2.8 m³ (3.7 cu yds) and a heaped capacity of 3.1 m³ (4.1 cu yds). The bucket width is 274.3 cm (108 in), designed for general material handling and loading applications.
High-Lift Buckets
A High-Lift configuration is available for the 446ZX, providing increased dump clearance of 274.3 cm (108 in) at maximum lift height. This configuration supports a tipping load of 10432.6 kg (23000 lbs) and is optimized for stacking or loading into high-sided trucks.
Specialty Buckets
Dealer offerings include Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading buckets. These tools are designed to improve productivity, material retention, and clean release depending on the specific job site conditions.
Quick Hitch Systems
JCB offers both manual and hydraulic quick hitch options to allow operators to switch between buckets, forks, and breakers within minutes. The system is designed to minimize downtime and is available based on the specific machine type and operator requirement.
Hydraulic Breakers
An OEM hydraulic breaker range is designed to work in harmony with JCB machines. These attachments are intended for demolition, trenching, and concrete breaking, requiring specific hydraulic flow and pressure connections compatible with the machine's twin variable displacement piston pump.
Safety Configurations
Machines built to the ROPS/FOPS standard feature a data plate inside the cab and comply with EN13510:2000 (ROPS) and EN13627:2000 Level 2 (FOPS). The cab part numbers for these safety configurations are the OEM part reference and the OEM part reference.
All 446 assemblies by section
Every catalogued assembly group for the Jcb 446. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-12-1 Shovel, 3.1 Cu.M., Ht
| 26***66 | Shovel, 3.1cu.M., Direct Mount | 1 |
| 51***07 | Toeplate, With Teeth Holes | 1 |
A1-16-1 Shovel, 3.1 Cu.M., Ht, Z Bar Quickhitch Mount
| 26***73 | Shovel, 3.1cu.M, Q/Hitch Moun | 1 |
| 51***07 | Toeplate, With Teeth Holes | 1 |
A1-15-1 Shovel, 2.8 Cu.M., Ht, Z Bar Quickhitch Mount
| 26***69 | Shovel, 2.8cu.M, Q/Hitch Mount | 1 |
| 51***07 | Toeplate, With Teeth Holes | 1 |
A1-6-1 Tooth Options, Esco V29 Series
| 13***8D | Bolt, M20 X 80mm | 16 |
| 13***1D | Nut | 16 |
| 14***2Z | Washer | 16 |
A1-7-1 Tooth Guard
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***6Z | Bolt, M16 X 70mm | 2 |
A1-17-1 Shovel, 3.3 Cu.M., Ht, Z Bar Quickhitch Mount
| 26***74 | Shovel, 3.3cu.M., Q/Hitch Mount | 1 |
| 51***07 | Toeplate, With Teeth Holes | 1 |
A1-5-1 Bolt On Cutting Edge, 7 Piece
| 13***1Z | Nut | 14 |
| 51***00 | G.A. | 1 |
| 51***01 | Toeplate, Filler | 7 |
A1-11-1 Shovel, 2.8 Cu.M., Ht
| 26***65 | Shovel, 2.8cu.M., Direct Mount | 1 |
| 51***07 | Toeplate, With Teeth Holes | 1 |
A1-3-1 Shovel, 3.1 Cu.M., Z Bar
| 51***07 | Toeplate, With Teeth Holes | 1 |
| 51***00 | Shovel, 3.1 Cu. Metre | 1 |
A1-2-1 Shovel 3.1 Cu.M, Penetration, Z Bar
| 51***03 | Toeplate, Plain | 1 |
| 51***00 | Shovel, Peneteration, 3.1 Cu. Metre | 1 |
A1-1-1 Shovel, 2.8 Cu M.
| 51***07 | Toeplate, With Teeth Holes | 1 |
| 51***00 | Shovel, 2.8 Cu. Metre | 1 |
A1-4-1 Toeplate, Bolt-On, 2788 Mm Wide
| 13***1Z | Nut | 22 |
| 51***00 | G.A. | 1 |
| 51***01 | Toeplate, Outer | 2 |
A1-14-1 Shovel, 3.3 Cu.M., Ht
| 26***67 | Shovel, 3.3cu.M, Direct Mount | 1 |
| 51***07 | Toeplate, With Teeth Holes | 1 |
A3-1-1 Quickhitch, Z Bar, With Ball Valve
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***11 | Seal, Bonded | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
A3-1-2 Quickhitch, Z Bar, Without Ball Valve
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
B Bodywork, Cab, Loader End
B1-6-1 Engine Cover
| 12***43 | Buffer | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-5-1 Centre Pivot
| 13***3Z | Bolt | 6 |
| 14***1Z | Washer, M16 Plain | 6 |
| 14***2Z | Washer, M20 | 2 |
B1-21-1 Soundproofing, Rear Axle
| 13***7D | Setscrew, M10 X 25mm Long | 6 |
| 14***4D | Washer, 7/16" Large | 5 |
| 14***8D | Washer, M10 | 1 |
B1-17-1 Counterweight
| 13***5D | Bolt, M24 X 300 Lg. | 2 |
| 13***1D | Nut | 6 |
| 14***4D | Washer | 4 |
B1-1-1 Chassis Front
| 13***0D | Setscrew | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
B1-15-1 Mountings, Rear Lights
| 13***1D | Bolt, M8 X 110mm | 2 |
| 14***3D | Washer, Large | 2 |
| 33***98 | Bracket, Rear Light Mount | 2 |
B1-7-2 Cover, Cooling Bay
| 13***0D | Setscrew, M10 X 40mm | 10 |
| 13***6D | Bolt, M10 X 70mm Long | 3 |
| 13***1D | Nut, Plain | 42 |
B1-26-1 Covers, Anti Recirculation, Near Hyd/Transmission Coolers
| 33***56 | Plate, Anti-Recirculation, Bottom | 1 |
| 33***95 | Plate, Anti-Recirculation, Left Side | 1 |
| 33***96 | Plate, Anti-Recirculation, Right Side | 1 |
B1-19-1 Soundproofing, Cooling Bay
| 33***03 | Panel, Soundproofing, Left Side; Drg States Right Side But This Is Incorrect W, Hen Compared With Machine Build | 1 |
| 33***05 | Panel, Soundproofing, Right Side; Drg States Left Side But This Is Incorrect Wh, En Compared With Machine Build | 1 |
| 82***08 | Retainer, Insulation | 12 |
B1-18-1 Soundproofing, Engine Cover
| 33***26 | Panel, Soundproofing, Upper, Left Side | 1 |
| 33***28 | Panel, Soundproofing, Upper, Right Side | 1 |
| 33***29 | Panel, Soundproofing, Left Side | 1 |
B1-30-1 Guards, Front Light, Optional
| 33***22 | Guard, Front Light, Yellow | 2 |
B1-8-1 Fenders, Rear
| 13***9D | Setscrew, M10 X 35mm Long | 6 |
| 13***0D | Setscrew, M16 X 40mm | 8 |
| 13***3D | Nut, Self Lock M10 | 6 |
B1-16-1 Guard, Belly, Optional
| 13***8Z | Bolt, M12 X 30 | 17 |
| 14***5Z | Washer, Plain, 1/2" X 41mm Od | 17 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 17 |
B1-14-1 Step/Toolbox
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***2D | Bolt, M10 X 50 | 12 |
B1-7-1 Cover, Cooling Bay
| 13***7D | Setscrew, M8x25 | 11 |
| 13***0D | Setscrew, M10 X 40mm | 6 |
| 13***1D | Nut, Plain | 42 |
B1-25-1 Air Conditioing, Condensor
| 13***3D | Setscrew | 2 |
| 13***9D | Setscrew | 4 |
| 13***5D | Setscrew, M10 X 20 | 2 |
B1-20-1 Soundproofing, Belly Guard
| 33***01 | Panel, Soundproofing, Belly Guard | 1 |
| 33***02 | Panel, Soundproofing, Belly Guard | 1 |
| 82***08 | Retainer, Insulation | 9 |
B1-10-1 Fenders, Front
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***0D | Setscrew, M16 X 40mm | 14 |
B1-4-1 Tank, Hydraulic
| 02***82 | Plug, Oil Drain | 1 |
| 02***98 | O Ring | 1 |
| 12***91 | Washer, Nylon | 4 |
B1-2-1 Chassis Rear
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***43 | Seal | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
B1-3-1 Bodywork, Steps,Light Brackets
| 13***3D | Setscrew, M10 X16mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 6 |
| 13***0D | Setscrew, M12 X 40 | 2 |
B2-24-2 Cover, Heater
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***3Z | Nut | 2 |
B2-21-1 Armrest
| 12***53 | Spacer, Steel | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B2-1-1 Cab
| 12***47 | Handle, C/W Barrel Lock Only | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Capscrew, M6 X 10mm X 12.9 | 2 |
B2-29-1 Soundproofing, Cab
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 26***17 | Panel, Soundproofing, "C" Pillar; Superseded To 33***93 On San100944 D.Jackson 05/08/09, Pi R06267aa ( Supplier Change ) | 2 |
B2-30-1 Cab Mountings
| 13***3D | Bolt | 4 |
| 13***3D | Nut | 4 |
| 14***8Z | Washer, External Teeth Lock | 4 |
B2-31-1 Mirror, Interior
| 12***71 | Mirror, Interior Assembly | 2 |
| 82***72 | Screw, M5 X 25 | 2 |
| 82***77 | Spacer | 4 |
B2-26-1 Fire Extinguisher
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
B2-27-1 Vandal Guards And, Shrouds, Canopy
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut | 18 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
B2-3-1 Canopy
| 14***2Z | Washer, Lock | 6 |
| 26***25 | G.A. | 1 |
| 26***57 | Canopy | 1 |
B2-13-1 Roof And Skirts, Cab
| 13***5Z | Bolt | 1 |
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 13 |
B2-2-1 Door Restraints
| 13***2Z | Nut, Lock | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 21***08 | Pin, Clevis | 1 |
B2-23-1 Drinks Holder
| 12***02 | Plate, Compression | 1 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
B2-10-1 Suspension Seat, Components, Kab/Bostrom
| 40***11 | Kit-Latch, Height Riser | 1 |
| 40***21 | Pad, Switch | 1 |
| 40***03 | Kit, Backrest Foam | 1 |
B2-4-1 Interior Mouldings
| 12***31 | Vent, Air Register | 2 |
| 12***51 | Strip, Kick | 1 |
| 13***7D | Screw, M6 X 25mm | 3 |
B2-14-1 Suspension Seat, Heated, 24 Volt - Optional
| 26***92 | G.A., Seat, 24v Heated | 1 |
| 40***00 | Seat, Heated, 24 Volt | 1 |
| 40***00 | Belt, Safety, Inertia 42" Long; Superseded By 40/90***00, San22076 07/02/06, S.Littlewood. | 1 |
B2-7-1 Visor, Sun
| 13***0D | Bolt, M6x40 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 26***68 | G.A. | 1 |
B2-18-1 Air Suspension Seat, Components
| 40***21 | Pad, Switch | 1 |
| 40***03 | Kit, Backrest Foam | 1 |
| 40***05 | Kit, Seat Squab Foam | 1 |
B2-9-1 Seat, Suspension, Kab/Bostrom
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 13***3Z | Nut, Lock | 2 |
B2-15-1 Suspension Seat, Components, 24 Volt Heated
| 40***11 | Kit-Latch, Height Riser | 1 |
| 40***21 | Pad, Switch | 1 |
| 40***03 | Kit, Backrest Foam | 1 |
B2-6-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-16-1 Seat, Suspension, Kab/Bostrom
| 12***52 | Spacer | 2 |
| 13***3Z | Nut, Lock | 2 |
| 13***08 | Bolt | 4 |
B2-1-2 Cab
| 13***3D | Setscrew | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1D | Nut, M8 | 2 |
B2-8-1 Visor, Sun
| 26***02 | G.A. | 1 |
| 33***72 | Visor, Sun | 1 |
| 82***23 | Screw, Spire | 1 |
B2-22-1 Canopy Trim Kit
| 12***96 | Hook, Coat | 1 |
| 12***79 | Strap, Coat Tidy | 1 |
| 12***51 | Strip, Kick | 2 |
B2-25-1 Skirts, Canopy
| 13***5Z | Bolt | 14 |
| 13***3Z | Nut, Self Lock, M6 | 14 |
| 13***2Z | Nut, Thin M20 | 2 |
B2-5-1 Cab Glazing, Tinted, Sliding Window
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***17 | Window, Drop Sliding & Frame, Tinted Green | 2 |
B2-24-1 Cover, Heater
| 12***86 | Catch, Vandal Cover | 1 |
| 13***1Z | Bolt, M10 X 10 | 4 |
| 14***09 | Seal; Supplied With Item 1. Remove To Fit Item 18, Seal | 4 |
B2-28-1 Guard Windscreen
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 4 |
B3-1-1 Arms, Loader, & Linkage
| 13***0D | Setscrew | 13 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 12 |
| 26***79 | Spacer | 2 |
B3-5-1 Remote Greasing, Z Bar
| 14***08 | Seal, Washer | 1 |
| 20***04 | Adaptor, Grease | 1 |
| 26***78 | Bracket, Remote Greasing | 1 |
B3-4-1 Safety Strut
| 12***00 | Strap | 1 |
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut | 1 |
B5-2-1 Labels, Identity
| 81***16 | Label, Height, 12 Ft. | 1 |
| 81***16 | Label, Tyre Pressure | 1 |
| 81***22 | Decal, Engine Cover, 446zx | 2 |
B5-1-1 Labels
| 81***73 | Label, Caution | 1 |
| 81***52 | Label, Battery, Isolator | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
B5-4-1 Labels, Cab
| 81***77 | Label, Read Handbook | 1 |
| 81***05 | Decal, Loader Control, 3 Spool | 1 |
| 81***06 | Label, Lever Lock | 1 |
B6-4-1 Homologation, Rear Number Plate, German
| 13***7D | Screw, M6 X 25mm | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 26***74 | Mounting, No.Plate Light | 1 |
B6-3-1 Homologation Parts, German
| 13***7D | Setscrew, M8x25 | 8 |
| 13***3Z | Nut | 8 |
| 13***3D | Nut, Self Lock M8 | 8 |
B6-2-1 Hazard Warning Kit, Toothguard, German
| 12***99 | Plate, Hazard Warning | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
B6-1-1 Homologation Parts, Italian
| 12***00 | Strap | 3 |
| 12***81 | Bracket, Number Plate | 1 |
| 26***65 | Plate, Tilt Ram Stay | 1 |
C Electrics-Machine, Cab & Engine
C1-14-1 Work Lights, Front, 24 Volt
| 26***38 | G.A. | 1 |
| 70***00 | Light, Front Working,24v, Twin Power(2 Bulbs) | 2 |
| 72***32 | Bulb, H3 24v 70w | 2 |
C1-26-1 Electrics, Auxilliary Solenoids, Proportional Control
| 70***13 | Cover, Auxiliary, Decal | 1 |
| 70***31 | Switch, 24v | 1 |
| 70***37 | Gasket, Panel Switch | 1 |
C1-2-1 Harness, Canopy Electrics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 24***09 | Grommet | 2 |
C1-4-1 Electrics Trailer, 24 Volt
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
C1-12-1 Work Light, Rear
| 12***05 | Bracket | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
C1-23-1 Harness Brackets
| 26***08 | Bracket, Mounting P Clip | 0 |
| 26***09 | Bracket, Mounting | 1 |
| 26***10 | Bracket, Mounting, Alternator Wiring | 0 |
C1-22-1 Pressure Switches, Brake And Dump
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
C1-24-1 Heated Mirror
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 33***71 | Bracket, Mirror | 1 |
C1-10-1 Cctv Installation, 'Mitsubishi' Cv40, Optional
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
C1-9-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-5-1 Electrics Trailer, 12 Volt
| 13***5Z | Bolt, M5 X 20mm Long | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut | 9 |
C1-19-1 Light, Head, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***09 | Light, & Side Repeater, Rh Dip, Lh Side | 1 |
C1-15-1 Light, Beacon, Hazard Warning, Optional
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***42 | Beacon, Assembly, 24 Volt, Inc. Bracket | 1 |
C1-25-1 Electrics, Auxilliary Solenoids, Bang-Bang
| 26***32 | Resistor, Assembly; Earthmovers Supplier: Parkinson Harness Tech, Ltd | 1 |
| 33***24 | Bracket, Relay Mounting | 1 |
| 70***13 | Cover, Auxiliary, Decal | 1 |
C1-3-1 Battery & Fittings
| 13***8Z | Bolt | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3Z | Nut | 3 |
C1-16-1 Alarm, Reverse
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-10-2 Cctv Installation, 'Mitsubishi' Vt-70
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 26***22 | G.A. | 1 |
C1-18-1 Light, Head, Left Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***07 | Light, & Side Repeater, Lh Dip, Lh Side | 1 |
C1-11-1 Light, Number Plate
| 13***3D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 26***74 | Mounting, No.Plate Light | 1 |
C1-20-1 Horn, Single Tone
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-7-1 Fuel Sender
| 13***3D | Screw, M5x16 | 4 |
| 14***5D | Washer | 4 |
| 70***86 | Sender, Fuel | 1 |
C1-8-1 "P" Clips
| 13***3Z | Screw, M6x16 | 1 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
C1-6-1 Fuses And Relays, Battery Mounted
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 14***7Z | Washer, Spring | 1 |
| 26***49 | G.A., Ga Primary Fuse Box | 1 |
C1-1-1 Harnesses
| 72***18 | Harness, Side Console | 1 |
| 72***20 | Harness, Rear Cab | 1 |
| 72***24 | Harness, Transmission | 1 |
C1-17-1 Light Combination, Rear 24v
| 70***68 | Rear Cluster, With Reverse Light | 1 |
| 70***69 | Rear Cluster, With Fog Light | 1 |
| 70***72 | Lens, Red, Rear Position/Stop | 2 |
C1-27-1 Electrics, Emergency Steer
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***3D | Nut, M6 Lock | 5 |
| 14***6D | Washer, M6 Plain | 10 |
C1-16-2 Alarm, Reverse, Bbs
| 13***7D | Setscrew, M8x25 | 2 |
| 13***0D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
C2-3-1 Alternator
| 71***04 | Stator, Assembly | 1 |
| 71***07 | Rectifier, Bridge Assembly | 1 |
| 71***08 | Diode, Trio | 1 |
C2-6-1 Solenoid, Engine Stop
| 02***46 | Nut, Lock | 1 |
| 02***47 | Washer | 1 |
| 02***02 | Screw, M8 X 20mm | 1 |
C2-4-3 Alternator Mountings, Sealed, Optional
| 02***97 | Belt, Fan Drive | 1 |
| 13***7D | Screw, M6 X 25mm | 6 |
| 13***8D | Setscrew, M12 X 30 | 4 |
C2-3-2 Alternator, Sealed, 24volt-50amp, Optional
| 71***02 | Unit, Rectifier/Regulator | 1 |
| 71***03 | Regulator, Voltage | 1 |
| 71***04 | Circuit Board, Pc | 1 |
C2-1-1 Electrical Equipment
| 70***21 | Switch, Vacuum Pressure | 1 |
| 70***65 | Switch, Engine Oil Pressure | 1 |
| 71***19 | Alternator, 24v-70a | 1 |
C2-4-2 Alternator Guard
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 5 |
C2-4-1 Alternator Mountings
| 02***19 | Screw | 1 |
| 02***20 | Screw | 3 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
C2-5-1 Engine Heater, Circuit
| 13***8D | Screw, M5x30 | 3 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, Lock M5 | 3 |
C2-2-1 Motor, Starter, 24.Volt
| 71***57 | Motor, Starter | 1 |
| 71***41 | Kit-Brush, Negative | 2 |
| 71***42 | Kit-Brush, Positive | 2 |
C3-7-1 Motor,Wiper,Washer, Front And Rear
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
C3-24-1 Heater Door, Heavy Duty Filter
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
C3-23-1 Heater Hoses
| 11***03 | Tap | 1 |
| 22***05 | Clip, Jubilee | 6 |
| 33***80 | Pipe, Hose Connector | 1 |
C3-16-1 In Cab Convertor, 24/12 Volt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut | 4 |
| 13***3Z | Capscrew | 2 |
C3-2-1 Fuse Box Cover
| 13***2Z | Screw | 2 |
| 13***3Z | Screw, M6x16 | 4 |
| 13***1Z | Nut, M5-8 | 6 |
C3-12-1 Ashtray & Lighter
| 14***02 | Screw | 4 |
| 26***90 | Ashtray | 1 |
| 26***88 | Bracket | 1 |
C3-6-1 Instrument Panel, Canopy, 24 Volt
| 26***51 | Bracket, Buzzer | 1 |
| 26***12 | G.A. | 1 |
| 70***02 | Indicator, Stalk | 1 |
C3-1-1 Instrument Panel, 24 Volt
| 24***14 | Grommet | 1 |
| 26***38 | G.A. | 1 |
| 70***00 | Light, Master, Warning 24v | 1 |
C3-8-1 Switch, Column
| 04***01 | Switch, Column | 1 |
| 13***3Z | Capscrew | 2 |
| 26***01 | G.A. | 1 |
C3-21-1 Air Conditioning, Common Parts
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***4Z | Bolt | 1 |
C3-22-1 Air-Con, Installation
| 13***9D | Bolt | 1 |
| 13***2D | Bolt | 1 |
| 13***4D | Bolt | 2 |
C3-2-2 Fuses And Relays
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 5 |
| 13***3Z | Nut | 13 |
| 13***07 | Screw, Cap | 8 |
C3-4-1 Fuse Box Lid, Canopy
| 13***5Z | Bolt | 3 |
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 4 |
C3-11-1 Instrument Panel, Roof Mounted
| 26***92 | G.A. | 1 |
| 33***23 | Panel, Switch, Roof Mounted; Superseded To 33***90 On San100543, D.Jackson 11/03/09 | 1 |
| 70***00 | Light, Interior | 1 |
C3-3-1 Fuses And Relays
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Nut | 9 |
| 13***07 | Screw, Cap | 8 |
C3-15-1 Radio Installation
| 26***84 | Plate, Clamping | 2 |
| 26***63 | G.A., Ga Speaker & Arial I | 1 |
| 71***00 | Aerial | 1 |
C3-10-1 Canopy Electrics, 24 Volt
| 13***3Z | Nut | 3 |
| 26***34 | G.A. | 1 |
| 70***03 | Cover, Roadlamps, Switch Decal | 1 |
C3-14-1 Control Unit, Transmission
| 04***38 | Unit, Transmission Control | 1 |
| 04***55 | Unit, Control, No 3rd/4th Gears | 1 |
| 26***23 | G.A. | 1 |
C3-20-1 Air Con. Unit, Components
| 25***02 | Valve, Expansion | 1 |
| 25***03 | Valve, Water | 1 |
| 26***17 | Unit, Air Conditioning | 1 |
C3-5-1 Fuses And Relays, Canopy Build, 24 Volt
| 14***07 | Screw | 4 |
| 14***09 | Screw, Self Tapper, M8 X 2" Long | 2 |
| 26***13 | G.A. | 1 |
D Controls-Machine, Engine & Steering
D1-4-1 Valve Servo, Joystick Control, Solenoid Operated Auxiliaries
| 13***5Z | Bolt | 5 |
| 14***11 | Seal, Bonded | 8 |
| 14***6Z | Washer, M6 | 5 |
D1-20-1 Control, Tilt Reset, Z Bar
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***8Z | Screw | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
D1-2-1 Handle, Servo Controller
| 25***68 | Spring | 2 |
| 25***69 | Pin | 2 |
| 25***21 | Switch, Sliding | 1 |
D1-3-2 Servo Valve, Components,928/60033
| 25***54 | Kit-Plunger | 4 |
| 25***42 | Regulator | 1 |
| 25***43 | Regulator | 3 |
D1-21-1 Control, Reset, Lift Arm
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
D1-1-1 Valve Servo, Joystick Control
| 13***5D | Setscrew, M6 X 20mm Long | 5 |
| 14***11 | Seal, Bonded | 8 |
| 14***6D | Washer, M6 Plain | 5 |
D1-10-1 Brake, Parking, Control
| 13***5D | Setscrew, M8x20 | 3 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
D1-3-1 Servo Valve, Components, 3 Spool Page Superseded See Index
| 25***04 | Coil, Assembly, 12 Volt | 3 |
| 25***01 | Coil, Assembly, 24 Volt; Superseded By 25/94***05 D.Jackson 06/08/08 On San26373 ( Request From Andrew Wier ) | 3 |
| 25***01 | Kit, Electric Detent, 24 Volt | 1 |
D2-1-1 Control, Throttle
| 02***87 | Lever, Throttle Extension | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 2 |
D2-3-1 Control, Hand Throttle, Optional
| 12***30 | Knob | 1 |
| 13***0Z | Bolt | 4 |
| 13***7D | Screw, M6 X 25mm | 2 |
D3-2-1 Flexible Joint, Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
D3-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***00 | Wheel, Steering | 1 |
| 13***9Z | Bolt, M8 X 35mm | 4 |
E Hydraulics & Air Including, Steering
E1-19-1 Cooler, Oil, Hydraulic
| 13***8D | Capscrew, M10x30 | 8 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
| 26***01 | Clamp | 4 |
E1-17-2 Hose And Pipework, Load Suspension
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 8 |
| 14***11 | Seal, Bonded | 2 |
E1-7-2 Hose And Pipework, Charge Pump
| 16***12 | Adapter | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
E1-10-1 Hose And Pipework, Servo Controller, Loader, Under Cab
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E1-20-1 Hose And Pipework, Hydraulic Tank
| 61***00 | Hose | 1 |
| 63***52 | Hose | 1 |
| 64***95 | Hose, Suction | 1 |
E1-5-1 Hose And Pipework, Steer Valve
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 4 |
| 24***03 | O Ring | 1 |
E1-1-1 Circuit, Loader End, Z Bar
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***0Z | Bolt, M10 X 100 | 2 |
E1-6-1 Hose And Pipework, Main Pump
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***13 | Capscrew | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
E1-10-5 Hose And Pipework, Servo Controller, Loader, Under Cab, Solenoid Auxilliaries
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E1-16-1 Hose And Pipework, Ground Pump
| 61***00 | Hose | 1 |
| 63***00 | Hose | 1 |
| 81***74 | Adapter | 1 |
E1-24-1 Hose & Pipework, Auxillary Solenoid, Accumulator
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***08 | Seal, Washer | 1 |
E1-4-1 Hose And Pipework, Loader Valve
| 13***9D | Capscrew, M12 X 35lg | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 1 |
E1-9-1 Hose And Pipework, Servo Controller, Loader
| 14***11 | Seal, Bonded | 10 |
| 16***02 | Adapter, 1/4" Bsp M/M | 10 |
| 25***00 | Valve, Ball | 1 |
E1-7-1 Hose And Pipework, Charge Pump
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
E1-14-2 Hose And Pipework, Fan Motor, Cooling Bay
| 13***8D | Capscrew, M10x30 | 16 |
| 14***11 | Seal, Bonded | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-17-1 Hose And Pipework, Load Suspension
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***2Z | Bolt, M14 X 50 Lg | 8 |
| 13***0D | Capscrew | 8 |
E1-11-1 Hose And Pipework, Test Points
| 14***08 | Seal, Washer | 3 |
| 14***11 | Seal, Bonded | 2 |
| 16***01 | Adapter | 3 |
E1-13-1 Hose And Pipework, Reverse Fan
| 13***5D | Setscrew, M10 X 20 | 4 |
| 14***8D | Washer, M10 | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
E1-28-1 Hose And Pipework, Quickhitch Locking
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***2Z | Screw, M6 X 50 | 2 |
| 13***1D | Setscrew, M8 X 12mm | 1 |
E1-18-1 Hose And Pipework, Accumulators, Load Suspension
| 14***26 | Washer, Seal | 2 |
| 16***12 | Adapter | 2 |
| 32***36 | Accumulator | 2 |
E1-9-5 Hose And Pipework, Servo Controller, Loader, Solenoid Aux. On Valve Block
| 14***11 | Seal, Bonded | 8 |
| 16***02 | Adapter, 1/4" Bsp M/M | 8 |
| 25***00 | Valve, Servo, Loader Control | 1 |
E1-8-1 Hose And Pipework, Emergency Steer
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***1Z | Bolt, M8 X 45 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-15-1 Hose And Pipework, Hyd/Transmission, Engine Bay
| 16***06 | Adapter | 1 |
| 61***65 | Hose | 1 |
| 63***28 | Hose | 1 |
E1-14-1 Hose And Pipework, Fan Motor, Cooling Bay
| 13***8D | Capscrew, M10x30 | 16 |
| 14***11 | Seal, Bonded | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E1-12-1 Hose And Pipwork, Steer Rams
| 13***0D | Bolt, M8x100 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E1-8-2 Hose And Pipework, Emergency Steer
| 13***5D | Setscrew, M8x20 | 5 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***7D | Setscrew, M12 X 25 | 2 |
E2-5-1 Motor, Fan
| 20***61 | Motor, Hydraulic | 1 |
| 20***18 | Motor, Hydaulic | 1 |
| 20***34 | Kit, Seal | 1 |
E2-2-1 Main Hydraulic Pump, Components
| 20***18 | O Ring | 6 |
| 20***25 | Pump, Twin, 60cc | 1 |
| 20***08 | Valve, Pilot, Dfr 1 | 2 |
E2-3-1 Pump, Emergency Steer
| 20***09 | Pump, Emergency Steer; Superseded By 33***92 D.Jackson 22/05/08, San26158 (Pi R00719 Ac) No Thermal Cut-Out | 1 |
| 25***63 | Kit, Motor | 1 |
| 25***64 | Kit, Brush | 1 |
E2-4-1 Pump, With Charge Valve
| 20***69 | Pump, Charge | 1 |
| 20***52 | Kit-Seal | 1 |
| 20***95 | Valve, Assembly | 1 |
E3-23-1 Valve Components, 25/220963, 3 Spool
| 25***01 | Kit, Section, Sealing | 3 |
| 25***01 | Body, Assembly, Inlet | 1 |
| 25***94 | Valve, Section, Priority Steer | 1 |
E3-22-1 Valve Components, 928/60072
| 25***01 | Kit, Section, Sealing | 3 |
| 25***01 | Body, Assembly, Inlet | 1 |
| 25***93 | Cover, End C/W Pressure, Reducing Valve | 1 |
E3-10-1 Valve, Load Suspension
| 25***80 | Kit-Seal, Suspension Valve | 1 |
| 25***96 | Valve, Pressure Relief | 1 |
| 25***97 | Block, Control | 2 |
E3-1-1 Valve Assembly, 3 Spool & Adapters
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
E3-21-1 Lubricants & Filters
| 26***97 | G.A. | 1 |
| 40***1A | Oil, Ls Gear, 5 Litres | 1 |
| 40***02 | Oil, Ls Gear, 25 Litres | 1 |
E3-19-1 Valve, Section, Priority Steer
| 25***94 | Valve, Section, Priority Steer | 1 |
| 25***78 | Spring, Compensator | 1 |
| 25***79 | Spring, Compensator, Inner | 1 |
E3-3-1 Valve Assembly, 25/220963
| 25***01 | Kit, Section, Sealing | 1 |
| 25***01 | Body, Assembly, Inlet | 1 |
| 25***94 | Valve, Section, Priority Steer | 1 |
E3-2-1 Valve Assemebly, 928/60072
| 25***01 | Kit, Section, Sealing | 1 |
| 25***01 | Body, Assembly, Inlet | 1 |
| 25***93 | Cover, End C/W Pressure, Reducing Valve | 1 |
E3-10-2 Valve, Load Suspension
| 25***27 | Valve, Ride Control; V19 | 1 |
| 25***69 | Housing | 1 |
| 25***70 | Socket | 1 |
E3-11-1 Valve Assembly, 25/221741 Rev.Fan
| 13***11 | Screw, Cap | 4 |
| 25***41 | Valve, Reversing Fan | 1 |
| 25***28 | Kit-Seal | 1 |
E3-20-1 Filter, Hydraulic
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 32***03 | Bridge | 1 |
E4-4-1 Ram, Quickhitch
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-5-1 Ram, Shovel, Sales Special
| 13***15 | Screw, Cap | 8 |
| 69***47 | Screw, Set; Part Made N.L.A By Supplier, Ref San10755 | 1 |
| 69***48 | Ball, Steel; Part Made N.L.A By Supplier, Ref San10755 | 1 |
E4-3-1 Ram, Lift
| 69***06 | Ring, Snap | 1 |
| 69***70 | Shim | 1 |
| 69***76 | Kit, Repair, Nut; Replaces 69***71 | 1 |
E4-2-1 Ram, Shovel
| 13***15 | Screw, Cap | 8 |
| 33***63 | Bracket, Shovel Reset | 1 |
| 69***47 | Screw, Set; Part Made N.L.A By Supplier, Ref San10755 | 1 |
E4-1-1 Ram, Steering
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***08 | O Ring | 1 |
F Axles, Wheels & Transmission
F1-2-1 Differential, Components
| 10***49 | Kit, Crownwheel & Pinion | 1 |
| 10***51 | Trunnion, Pinion | 1 |
| 10***72 | Washer, Thrust | 2 |
F1-11-1 Axle Assembly, Front Pr15, Lsd, 10/300216, Data Plate Ref. 3286123
| 10***16 | Axle, Front Pr15 Lsd, Smoothshift | 1 |
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
F1-1-1 Axle Assembly, Front Pr15, Std., 10/300214, Data Plate Ref. 3286103
| 10***14 | Axle, Front Pr15, Smoothshift | 1 |
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
F1-3-1 Hub & Components, Front, 10/300214, 10/300216
| 10***00 | Disc, Brake | 8 |
| 10***76 | Cover, End, Jcb | 2 |
| 10***78 | Plate, Pressure | 2 |
F1-12-1 Differential, Components, Limited Slip
| 10***27 | Casing, Assembly | 1 |
| 10***49 | Kit, Crownwheel & Pinion | 1 |
| 10***51 | Trunnion, Pinion | 1 |
F2-1-1 Axle Assembly, Rear, 10/300215, Data Plate Ref. 3286113
| 10***15 | Axle, Rear Pr15, Smoothshift | 1 |
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
F2-2-1 Differential, Components
| 10***82 | Kit, Crownwheel & Pinion | 1 |
| 10***83 | Differential, Assembly | 1 |
| 10***84 | Drivehead, Assembly, Complete | 1 |
F2-10-1 Axle Pivot, Rear
| 13***6D | Bolt | 8 |
| 13***1D | Bolt | 6 |
| 13***7D | Capscrew | 4 |
F2-3-1 Hub & Components, Rear, 10/300215, 10/300217
| 10***00 | Disc, Brake | 8 |
| 10***76 | Cover, End, Jcb | 2 |
| 10***79 | Plug, C/W O Ring | 2 |
F2-12-1 Differential, Components, Limited Slip
| 10***82 | Kit, Crownwheel & Pinion | 1 |
| 10***86 | Pinion, Spider | 1 |
| 10***88 | Drivehead, Assembly, Complete | 1 |
F2-11-1 Axle Assembly, Rear Pr15, Lsd, 10/300217, Data Plate Ref. 3286133
| 10***17 | Axle, Rear Pr15 Lsd, Smoothshift | 1 |
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
F3-2-1 Wheels & Tyres, Michelin, 5 Piece Rim
| 25***01 | Valve | 1 |
| 25***03 | Adapter, Valve | 1 |
| 26***36 | Wheel, And Tyre Assembly, Mich.Xld65-1superl3t | 1 |
F3-4-1 Wheels & Tyres, Bridgestone, 5 Piece Rim
| 25***01 | Valve | 1 |
| 25***03 | Adapter, Valve | 1 |
| 26***34 | Wheel, And Tyre Assembly, Bridgestone Vl2 | 4 |
F3-1-1 Wheels & Tyres, Michelin, 3 Piece Rim
| 25***01 | Valve | 1 |
| 25***03 | Adapter, Valve | 1 |
| 33***24 | Wheel, And Tyre, Michelin, 20.5x25 Xtla | 4 |
F3-3-1 Wheels & Tyres, Bridgestone, 3 Piece Rim
| 25***01 | Valve | 1 |
| 33***67 | Wheel, And Tyre, Brdstone, 20.5r25 Vut L2 | 4 |
| 33***68 | Wheel, And Tyre, Brdstone, 20.5r25 Vmt | 4 |
F3-6-1 Wheels & Tyres, Goodyear, 5 Piece Rim
| 25***01 | Valve | 1 |
| 25***03 | Adapter, Valve | 1 |
| 26***14 | Wheel, And Tyre Assembly, Goodyear Gp-2b | 1 |
F3-5-1 Wheels & Tyres, Goodyear, 3 Piece Rim
| 25***01 | Valve | 1 |
| 33***23 | Wheel, Assembly, 20.5-25, Goodyear, 12 Ply | 4 |
| 33***31 | Wheel, And Tyre, Goodyear, 20.5r25 Gp-2b | 4 |
F4-1-1 Propshafts, Transmission
| 11***25 | Strap | 8 |
| 13***9D | Bolt, Grade 12.9 | 2 |
| 13***3D | Nut | 10 |
F5-4-1 Oil Pump
| 04***16 | Screw, M10 | 10 |
| 20***83 | Pump, Gear; Was 0501-214-216 D.Jackson 23/04/07 | 1 |
| 20***32 | Pump, Oil Pressure | 1 |
F5-10-1 Coupling Group, Fourth
| 04***69 | O Ring | 1 |
| 04***71 | Spring, Cup | 7 |
| 04***72 | Ring, Retaining | 1 |
F5-11-1 Coupling Group, Forward
| 04***69 | O Ring | 1 |
| 04***72 | Ring, Retaining | 1 |
| 04***73 | Ring, Snap | 1 |
F5-6-1 Pipework, Gearbox Housing
| 33***28 | Pipe, Assembly | 1 |
| 33***29 | Pipe, Assembly | 2 |
| 33***30 | Pipe, Assembly | 1 |
F5-8-1 Coupling Group, Second
| 04***69 | O Ring | 1 |
| 04***71 | Spring, Cup | 7 |
| 04***72 | Ring, Retaining | 1 |
F5-5-1 Gearbox Housing
| 04***07 | Capscrew | 51 |
| 04***23 | Screw | 2 |
| 04***28 | Nut | 12 |
F5-22-1 Dipstick, Transmission
| 04***94 | Dipstick | 1 |
| 04***26 | Screw, M8x18 | 2 |
| 04***60 | Bolt | 2 |
F5-23-1 Blanking Plugs
| 04***53 | O Ring | 2 |
| 04***82 | Plug | 1 |
| 04***83 | O Ring | 1 |
F5-12-1 Coupling Group, Reverse
| 04***69 | O Ring | 1 |
| 04***72 | Ring, Retaining | 1 |
| 04***73 | Ring, Snap | 1 |
F5-18-1 Pressure Regulator
| 04***86 | Valve | 1 |
| 04***87 | Piston | 1 |
| 04***88 | Plate, Pressure | 1 |
F5-6-2 Pipework, Gearbox Housing
| 04***92 | Pipe, Oil | 1 |
| 04***93 | Capscrew, M8 | 2 |
| 04***94 | Pipe, Oil | 1 |
F5-7-1 Coupling Group, First
| 04***68 | Piston | 1 |
| 04***69 | O Ring | 1 |
| 04***70 | O Ring | 1 |
F5-17-1 Gearshift System
| 04***77 | Gasket | 1 |
| 04***78 | Screen | 6 |
| 04***79 | Plate, Intermediate | 1 |
F5-2-1 Torque Converter
| 04***47 | Torque Converter | 1 |
| 04***05 | Bolt | 18 |
| 04***67 | Washer | 8 |
F5-24-1 Transmission, Mounting
| 12***02 | Plate, Compression | 4 |
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***10 | Bolt, M20 X 40 Lg | 4 |
F5-19-1 Filter, Transmission Oil
| 04***46 | O Ring; Superseded To 33***31 On San100877, D.Jackson 07/07/09 ( Instruction From Zf ) | 2 |
| 32***97 | Element, Filter; Superseded By 32/92***05 D.Jackson 12/10/06, San22941 | 1 |
| 32***38 | Cover, Filter Head | 1 |
F5-15-1 Gearshift System
| 04***48 | Gasket | 1 |
| 04***49 | Gasket | 1 |
| 04***50 | Plate, Intermediate | 1 |
F5-13-1 Output Group
| 04***84 | Bearing, Roller | 2 |
| 04***41 | Shaft, Output; Was Zf Part Number 4657-303-003 | 1 |
| 04***42 | Yoke, End | 1 |
F5-1-1 Transmission, & Converter Housing, Group
| 04***54 | Transmission, Smoothshift | 1 |
| 04***94 | Transmission, Complete | 1 |
| 71***65 | Sensor, Speed | 3 |
F5-20-2 Blanking Plate, Emergency Steer
| 04***26 | Screw, M8x18 | 23 |
| 04***57 | Gasket | 1 |
| 33***05 | Cover | 1 |
F5-21-1 Sender, Transmission
| 04***93 | Cap, Sealing | 1 |
| 04***17 | O Ring | 1 |
| 04***19 | Plug, M14 | 1 |
F5-9-1 Coupling Group, Third
| 04***69 | O Ring | 1 |
| 04***71 | Spring, Cup | 1 |
| 04***72 | Ring, Retaining | 1 |
F5-3-1 Input Group
| 04***25 | Shaft, Input | 1 |
| 04***18 | Ring, Snap | 1 |
| 04***49 | Ring, Piston | 2 |
F5-14-1 Power Take-Off
| 04***44 | Shaft, Pump | 1 |
| 04***45 | Ring, Retaining | 1 |
| 04***46 | Plate, Cover | 1 |
F5-16-1 Control Valve, Gearshift System
| 04***60 | Orifice | 6 |
| 04***61 | Piston | 6 |
| 04***62 | Plug | 8 |
F5-20-1 Pump, Emergency Steer
| 04***44 | Cover | 1 |
| 04***45 | Gasket, Cover | 1 |
| 04***12 | Pump, Emergency Steer | 1 |
F5-15-2 Gearshift System
| 04***52 | Plug | 1 |
| 04***53 | O Ring | 2 |
| 04***55 | Spring | 1 |
F6-2-1 Hose And Pipework, Transmission Casing
| 16***12 | Adapter, 1" Bsp, M/M | 2 |
| 24***10 | O Ring | 1 |
| 63***50 | Hose | 1 |
F6-1-1 Cooler, Oil, Transmission
| 13***8D | Capscrew, M10x30 | 8 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
| 26***01 | Clamp | 4 |
G Brakes
G1-9-1 Brake Switch, Installation
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-2-1 Brake Caliper, Parking
| 13***3Z | Bolt, M14 X 55 | 4 |
| 13***8Z | Bolt, M16 X 80 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
G1-5-2 Hose And Pipework, Charge Pump
| 16***12 | Adapter | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
G1-3-1 Hose And Pipework, Park Brake Valve, Accumulators
| 16***03 | Adapter | 2 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***05 | O Ring | 1 |
G1-7-1 Brake Pipes
| 13***3Z | Bolt, M10 X 16 | 2 |
| 13***1D | Bolt, M10 X 45mm Long | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
G1-5-1 Hose And Pipework, Charge Pump
| 14***11 | Seal, Bonded | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
G1-6-1 Brake Pedal
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt, M10 X 100 | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 4 |
G1-1-1 Valve, Brake
| 13***2D | Nut, Thin | 1 |
| 13***16 | Capscrew, M8 X 70mm | 3 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 5 |
U Engine C Series 8.3 Litre
U1-5-2 Pulley Guards
| 13***7D | Setscrew, M8x25 | 8 |
| 13***3D | Nut, Self Lock M8 | 3 |
| 14***7D | Washer, M8 Plain | 12 |
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***69 | Plate, Cover | 1 |
U1-6-1 Timing Case, Camshaft & Gears
| 02***43 | Seal | 1 |
| 02***55 | Ring, Retaining | 1 |
| 02***56 | Pin, Timing | 1 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***39 | Dowel, Pin | 1 |
| 02***20 | Crankshaft, Assembly | 1 |
| 02***21 | Gear, Crankshaft | 1 |
U1-1-1 Engine, Complete
| 01***96 | Engine, Complete, Turbocharged, 185bhp | 1 |
U1-6-2 Timing Case, Auxiliary Drive
| 02***87 | Gasket | 1 |
| 02***61 | Plate, Cover | 1 |
| 02***33 | Spacer | 1 |
U1-8-1 Engine Mountings
| 02***89 | Screw, M12 X 90 | 4 |
| 02***63 | Bracket, Engine Support, Front | 1 |
| 12***02 | Plate, Compression | 2 |
U1-5-1 Fans, Pulleys, & Fan Belt
| 02***32 | Bearing | 1 |
| 02***33 | Circlip | 2 |
| 02***35 | Hub, Fan | 1 |
U1-3-1 Block Assembly
| 02***14 | Dowel, Pin | 2 |
| 02***15 | Plug, Pipe, 1/2"Npt | 7 |
| 02***28 | Seal, Rectangular Ring | 1 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***24 | Manifold, Rocker Oil Feed | 1 |
| 02***25 | Washer, Plain | 12 |
| 02***26 | Washer, Spring | 12 |
U2-1-1 Cylinder Head
| 02***06 | Plug, Expansion, D=58mm | 2 |
| 02***07 | Plug, Expansion, D=26mm | 5 |
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
U2-3-1 Rocker Cover
| 02***69 | Clamp, Hose | 2 |
| 02***77 | Gasket, Rocker Cover | 1 |
| 02***78 | O Ring | 6 |
U2-4-1 Lifting Plates, Engine
| 02***07 | Bracket, Lifting | 1 |
| 02***08 | Bracket, Lifting | 1 |
| 02***87 | Screw | 2 |
U3-5-1 Heater, Air Intake
| 02***01 | Lead, Earth | 1 |
| 02***01 | Gasket, Inlet Manifold | 1 |
| 02***45 | Heater, Engine | 1 |
U3-4-1 Exhaust System
| 13***7D | Setscrew, M8x25 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
U3-1-1 Manifold, Induction
| 02***15 | Plug, Pipe, 1/2"Npt | 1 |
| 02***01 | Gasket, Inlet Manifold | 1 |
| 02***09 | Cover, Air Induction | 1 |
U3-3-2 Filter, Pre-Cleaner
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***6Z | Washer, M6 | 8 |
U3-3-1 Filter, Air
| 13***7Z | Bolt, M10x25 | 4 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 4 |
| 13***3Z | Nut, Lock, M10 | 6 |
U3-2-1 Manifold, Exhaust
| 02***04 | Plate, Lock | 12 |
| 02***44 | Gasket, Turbo To Manifold | 1 |
| 02***36 | Nut | 4 |
U3-4-2 Exhaust System
| 02***47 | Clamp, D=104.4 | 1 |
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
U4-4-1 Radiator, Fittings & Mountings
| 12***02 | Plate, Compression | 2 |
| 13***7D | Setscrew, M8x25 | 20 |
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
U4-5-4 Cooler Assembly, Wide Core, Epoxy Coated
| 30***24 | Cooler, Combination, Wide Core,Epoxy Coat | 1 |
U4-5-2 Cooler Assembly, Epoxy Coated
| 13***7Z | Bolt, M10x25 | 16 |
| 13***0Z | Bolt, M12x40 | 4 |
| 13***3Z | Nut, M12 | 4 |
U4-7-1 Cooler, Air Charge, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U4-5-1 Cooler Assembly
| 13***7Z | Bolt, M10x25 | 16 |
| 13***0Z | Bolt, M12x40 | 4 |
| 13***3Z | Nut, M12 | 4 |
U4-3-1 Corrosion Resistor, Installation
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
| 02***85 | Element, Anti-Corrosion | 1 |
| 02***82 | Head, Corrosion Filter | 1 |
U4-1-1 Pump, Water
| 02***14 | Seal, O Ring | 1 |
| 02***15 | Pump, Water | 1 |
| 82***53 | Screw | 3 |
U4-5-3 Cooler Assembly, Wide Core
| 30***23 | Cooler, Combination, Wide Core | 1 |
U4-2-1 Connectors, Water Inlet/Outlet, And Thermostat
| 02***02 | Screw, M8 X 20mm | 2 |
| 02***07 | Bolt, M8x1.25x25 | 2 |
| 02***68 | Connector, Water Inlet | 1 |
U4-6-1 Radiator, Hoses & Fittings
| 02***21 | Valve, Check | 1 |
| 02***22 | Coupling, Straight | 1 |
| 02***05 | Connector, Water | 2 |
U5-5-1 Pipes, Oil Feed
| 02***37 | Washer, Seal | 2 |
| 02***34 | Bolt Banjo, M10 X 1.00 X 19 | 1 |
| 02***39 | Adapter, Elbow | 1 |
U5-1-1 Sump, Oil, & Fittings
| 02***22 | Washer, Seal | 1 |
| 02***26 | Plug, Oil Drain | 1 |
| 02***27 | Washer, Seal | 1 |
U5-2-1 Pump, Oil
| 02***32 | Screw | 4 |
| 02***12 | Pump, Oil | 1 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 2 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***56 | Cover, Oil Cooler | 1 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***96 | Bolt, Banjo | 1 |
| 02***44 | Washer, Seal | 2 |
| 02***45 | Valve, Non-Return | 1 |
U6-3-1 Fuel Pipes, Injection Pump
| 02***27 | Washer, Seal | 1 |
| 02***61 | Bolt, Banjo | 1 |
| 02***63 | Adapter | 1 |
U6-8-1 Pump, Fuel Lift
| 02***10 | Gasket | 1 |
| 02***18 | Screw | 2 |
| 17***00 | Pump, Fuel Lift | 1 |
U6-7-1 Filter, Fuel
| 02***50 | Element, Fuel Filter, Water Seperator | 1 |
| 02***54 | Adapter, Filter Connector | 1 |
| 02***55 | Element, Fuel Filter, Cartridge | 1 |
U6-5-1 Injectors, Fuel
| 17***00 | Injector, Assembly | 6 |
U6-1-1 Pump, Fuel Injection
| 02***43 | Bolt | 1 |
| 02***63 | Seal, O Ring | 1 |
| 02***33 | O Ring | 1 |
U6-6-1 Filter, Fuel Sediment
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***07 | Washer, Locking | 1 |
U6-2-1 Injectors, Fuel, & Injection Pipes
| 02***91 | Seal | 7 |
| 02***44 | Washer, Seal | 2 |
| 02***45 | Valve, Non-Return | 1 |
U7-5-2 Compressor 24volt, Air Conditioning, Sd7h15#8163 Green Label
| 12***99 | Compressor, 24v | 1 |
| 14***67 | Cover, Bearing Dust | 1 |
| 26***84 | Coil, Field | 1 |
U7-2-1 Turbo, Pipework
| 02***47 | Adapter | 2 |
| 02***68 | Hose | 1 |
| 02***59 | Gasket | 1 |
U7-1-1 Turbocharger
| 02***44 | Gasket, Turbo To Manifold | 1 |
| 02***99 | Gasket | 1 |
| 02***36 | Nut | 4 |
U7-4-1 Compressor, & Installation, Air Conditioning
| 02***93 | Bracket, Compressor Mounting | 1 |
| 02***46 | Lever, Compressor Adjusting | 2 |
| 02***20 | Nut | 5 |
U7-5-1 Compressor 24.Volt, Air Conditioning, Sd7h15#4652 White Label
| 12***99 | Compressor, 24v | 1 |
| 14***24 | Kit-Sundry Parts | 1 |
| 14***67 | Cover, Bearing Dust | 1 |
U7-6-1 Heater, Engine Block
| 13***0D | Setscrew | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 2 |
U8-1-1 Gasket Set, Top Overhaul
| 02***45 | Kit-Gasket, Top Overhaul | 1 |
U8-2-1 Gasket Sets, Bottom Overhaul
| 02***02 | Kit-Gasket, Bottom Overhaul | 1 |
446 serial number reference
Locate the machine identification plate mounted on the frame or chassis as shown in the service manual illustrations. The PIN indicates the machine model and build specification. The serial number of the machine and major units is stamped on this plate. If a major unit is replaced, the serial number on the identification plate may be incorrect; stamp the new number on the plate to prevent quoting the wrong unit number when ordering replacement parts. Confirm applicability with a JCB dealer if the plate is unreadable or missing.
| Prefix | Identifies | Notes |
|---|---|---|
| 540000 to 540011 | JCB 446 Wheeled Loading Shovel applicability per manual the OEM part reference-17 | |
| 540013 onwards | JCB 446 Wheeled Loading Shovel applicability per manual the OEM part reference-08 |
Frequently asked questions
What engine does the JCB 446 use?
The JCB 446 uses a Cummins 6CT8.3C engine, which is a 6-cylinder, turbocharged diesel with 8300.1 cc (506.5 cu in) displacement.
What is the operating weight of the JCB 446?
The operating weight is 20,633.9 kg (45,490 lbs), varying by configuration and attachment package.
What model replaced the JCB 446?
The JCB 456 Wheeled Loading Shovel succeeded the 446, with service manuals covering both models from specific serial number ranges.
What 446 owners discuss
What are the typical powertrain and hydraulic behaviors for the JCB 446ZX wheel loader?
The JCB 446ZX utilizes a smooth shift powershift transmission paired with a twin variable displacement piston pump hydraulic system. Operators report that hydraulic performance can degrade significantly when the rear of the machine is lower than the front (e.g., rear in a hole), as the suction strainer may draw air or lose prime. Steering responsiveness may also lag if hydraulic oil levels are low or if the orbital steering valve leaks, a known fault on older JCB models.
What undercarriage or wear patterns are typical for this machine type?
As a wheel loader, the JCB 446ZX relies on tire wear and axle hub integrity rather than track undercarriage. However, similar JCB articulated machines (such as skid steers and backhoes) exhibit high wear on hydraulic hoses due to crimping failures or pressure spikes. For wheel loaders, axle housing seals and hub bearings are critical wear points requiring regular inspection to prevent fluid loss and component failure.
What are the engine quirks per series for the JCB 446ZX?
The JCB 446ZX (manufactured 2001–2005) typically uses a JCB Dieselmax engine. Early Dieselmax engines (Tier 2/early Tier 3) are prone to big end bearing failures on the crankshaft if oil change intervals are stretched. Later iterations (Tier 4i/T4 Final) use common rail systems sensitive to fuel quality, with injector faults causing rough running or white smoke. Power loss is often linked to restricted air filters or turbocharger boost leaks.
What are common electrical or sensor issues?
Electrical issues often manifest as starting difficulties due to weak batteries (below 12.4V for 12V systems) or corroded earth straps. On older models, forward/reverse movement problems can stem from faulty microswitches on the shuttle lever that fail to activate hydraulic solenoids. Sensor faults in common rail engines may prevent the ECU from allowing the engine to run, requiring diagnostic code reading.
What should be checked when buying a used JCB 446ZX?
Verify the hydraulic oil level and suction strainer condition, as low levels cause steering and hydraulic lag. Check for internal collapse of the hydraulic suction hose, which can restrict oil flow without external signs. Inspect the engine for big end bearing knock (early Dieselmax) or injector leaks (common rail). Confirm the condition of the orbital steering valve for leaks. Ensure the battery and starter motor provide adequate cranking speed.
What safety-critical fix involves the hydraulic system?
If hydraulic performance is sluggish or steering fails when the machine is tilted, check the hydraulic oil level and suction strainer immediately. Running the hydraulic pump with a collapsed suction hose or low oil can cause catastrophic pump failure. Have your dealer verify the integrity of the suction hose and the condition of the hydraulic pump before further operation.
What fluid specifications are recommended for the JCB 446ZX?
Use JCB-branded service fluids verified for the specific machine. JCB recommends genuine hydraulic oil for the hydraulic system, engine oil for the Dieselmax engine, and specific transmission fluid for the powershift gearbox. Coolant must be changed at recommended intervals to prevent silicate separation, which causes brown sludge in the expansion bottle. Equivalent fluids meeting JCB verification standards are acceptable.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 446. Related factory variants of the same model family:
446
Need a specific 446 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.