JCBagriculturalwheeled loaders
Jcb 434S
Maintenance schedule, common problems & OEM parts breakdown
The JCB 434S is a wheeled loading shovel designed for agricultural and construction applications. It is powered by a Cummins QSB 6.7-litre turbocharged diesel engine producing 230 hp (171 kW). The machine weighs approximately 13.1 to 13.4 tonnes depending on configuration. Production began in 2018. It features a 6-speed powershift transmission and 4-wheel drive. Configurations include standard and high-lift variants with Q-Fit carriage options.
The 434S replaced earlier S-series wheel loaders in JCB's agricultural lineup. It matters in the used market due to its long 500-hour engine oil interval and robust Cummins engine. The machine is valued for its power-to-weight ratio and low maintenance requirements. Parts availability remains strong due to its common platform with the 435S and 427 models.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 434S specifications
Engine
| Model | Cummins QSB 6.7 litre |
| Configuration | 6-cylinder wastegated turbo-charged, liquid cooled, common rail injection diesel |
| Gross Power | 171 kW (230 hp) |
| Peak Torque | 945 Nm |
| Emissions Tier | Tier 4 Final / Stage IV |
Weights
| Operating Weight | 13,440 kg (29,630 lb) [per brochure]; 13,120 kg (28,925 lb) [per published references] |
| Full Turn Tipping Load | 7,849 kg (17,304 lb) |
Dimensions
| Transport Length | 6.831 m (22 ft 5 in) |
| Transport Width | 2.74 m (9 ft 0 in) |
| Transport Height | 3.244 m (10 ft 8 in) |
| Turning Radius (Outside) | 5.79 m (19 ft 0 in) |
| Maximum Discharge Height | 2.817 m (9 ft 3 in) |
Performance
| Transmission | 6-speed powershift with torque converter lock-up |
| Power-to-Weight Ratio | 16.8 hp/tonne |
| Hydraulic Circulation | 264 l/min (twin variable displacement piston pumps) |
| Bucket Capacity Range | 1.6 m³ (minimum) to 2.7 m³ (maximum) |
| Standard Shovel Capacity | 2.4 m³ (3.14 cu yd) |
Service capacities (summary)
| Fuel Tank | 400 litres (105.7 gal) |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 434S maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 434S beyond the schedule
Predictive Maintenance & Fluid Analysis
Take oil samples from the engine, hydraulic system, and axles at the 500-hour mark to establish a baseline. Monitor hydraulic return filter magnets for metallic debris. Use JCB-approved engine oil meeting API specifications. Check coolant silicate levels to prevent separation. Track transmission oil condition to detect gear wear early. Analyze fuel filter elements for water contamination.
Corrective & Common Repairs
Replace the hydraulic return filter if the magnet shows significant debris. Inspect the Cummins QSB 6.7 turbocharger boots for cracks. Check the 6-speed powershift transmission for smooth gear engagement. Replace worn brake discs and check immersed brake condition. Inspect the ZF axles for oil leaks at the hub seals. Test the LCD display and joystick auxiliary controls for responsiveness.
Overhaul & Rebuild Points
Inspect the loader arms and chassis for structural cracks at the 2000-hour service. Measure the articulation joint for wear. Check the swing ring bolts for torque if equipped with a rotating attachment. Inspect the engine injectors for spray pattern issues. Evaluate the transmission clutch packs for slippage. Check the hydraulic pump pressure settings against factory specs.
Seasonal & Environment Servicing
Check the cooling package for debris buildup to prevent overheating. Inspect the cab HVAC system for proper cooling in summer. Verify the battery electrolyte level in cold weather. Check tire pressure for varying ground conditions. Inspect the ROPS/FOPS structure for damage. Ensure the backup alarm and horn function correctly in noisy environments.
434S common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 332/W2716 | Engine, Complete Less Fuel Pre-Filter, Qsb 6.7l 220bhp | Fuel system service | Check fitment → |
| 32/925763 | Element, Fuel Water/Sediment, Filter Cartridge | Fuel system service | Check fitment → |
| 32/925922 | Adapter, Fuel Filter | Fuel system service | Check fitment → |
| 332/U5302 | Filter, Fuel, Assembly | Fuel system service | Check fitment → |
| 32/925920 | Filter, Fuel Assembly, M12 Ports | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
434S fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Fuel filter blockage or lift pump failure | Check fuel filters and pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Coolant temperature sensor fault or wiring issue | Inspect sensor circuit and coolant level |
| P0521 | Engine oil pressure sensor range/performance issue | Oil pressure sensor fault or low oil level | Check oil level and sensor wiring |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Reductant injector circuit fault | Inspect injector circuit and DEF level |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus communication fault or loose connection | Check battery voltage and CAN bus connections |
| 101 | Low transmission clutch pressure detected | Transmission pressure fault | Check transmission fluid level and pressure |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Crank sensor fault or wiring issue | Inspect crank sensor and wiring harness |
| P0100 | AMF High Side Driver fault (Torque Reduction) | Electrical sensor fault or open/short circuit | Check sensor wiring and connectors |
| P0101 | MAF Sensor Fault | Mass Air Flow sensor fault | Inspect MAF sensor and intake system |
| P0102 | Torque Reduction MAF Low Voltage Fault | MAF sensor low voltage signal | Check MAF sensor voltage and wiring |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
434S attachments & work tools
Buckets
Standard shovel capacity is 2.4 m³ (3.1 yd³). Bucket configurations range from a minimum of 1.6 m³ (2.1 yd³) to a maximum of 2.7 m³ (3.5 yd³), with a standard bucket width of 2.55 m (8.4 ft).
Quickhitch Systems
JCB offers an optional quickhitch designed for fast and efficient attachment changing. The system is engineered to be compatible with aftermarket attachments as well as OEM tools.
Hydraulic Control
Attachment control is supported by constant torque loader arms throughout the full carriage rotation. The machine utilizes variable displacement pumps feeding a load-sensing valve block to provide precise power on demand.
Engine & Power
The machine is powered by a Cummins QSB 6.7-litre, 6-cylinder, wastegated turbo-charged, liquid-cooled, common rail injection diesel engine. Gross rated power is 230 hp (171 kW).
Transmission & Driveline
A 6-speed powershift transmission with electrically operated selector and gear change provides improved acceleration and hill climbing. The system includes a torque converter and closer gear ratios for roading performance.
Operating Weight & Capacity
Operating weight is 13,440 kg (29,630 lb) assuming the OEM part reference Michelin Megaxbib tyres. Full turn tipping load is 7,849 kg (17,304 lb).
Serial Applicability
The service manual and specifications apply to the JCB 434S model from machine serial number the OEM part reference onwards.
All 434S assemblies by section
Every catalogued assembly group for the Jcb 434S. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-1 Shovel 2.0 Cu.M., Ht
| 51***00 | Shovel, 2.0cu.M./2.6cu.Yd. | 1 |
| 51***02 | Toeplate | 1 |
A1-3-1 Shovel 1.8 Cu.M., Ht
| 51***00 | Shovel, 1.8cu.M./2.3cu.Yd. | 1 |
| 51***02 | Toeplate | 1 |
A1-1-1 Shovel 1.8 Cu.M., Quickhitch Ht
| 33***17 | Shovel, 1.8cu.M./2.3cu.M | 1 |
| 51***02 | Toeplate | 1 |
A1-6-1 Shovel 3.0 Cu.M., Quickhitch Ht, Sales Special
| 13***01 | Nut | 4 |
| 13***01 | Nut, 1"Unc Hexagon | 18 |
| 14***8D | Washer, 3/4inch | 4 |
A1-5-1 Shovel 2.0 Cu.M., Quickhitch Ht
| 33***18 | Shovel, 2.0cu.M | 1 |
| 51***02 | Toeplate | 1 |
A1-9-1 Tooth Guard
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 4 |
A1-10-1 Tooth Options, Esco V23 Series
| 13***8D | Bolt, M20 X 80mm | 16 |
| 13***1D | Nut | 16 |
| 14***2Z | Washer | 16 |
A1-8-1 Toeplate, Bolt-On, 2548mm Wide
| 13***1Z | Nut | 15 |
| 51***02 | Toeplate, Outer, 444mm Long,3 Holes | 2 |
| 51***05 | Toeplate, Inner, 1648mm Long, 9 Holes | 1 |
A3-10-1 Quick Release Coupling
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 26***17 | G.A. | 1 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
A3-3-1 Quickhitch
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 14***11 | Seal, Bonded | 2 |
A3-2-1 Fork Frame And Tines, Parallel Lift
| 14***4Z | Washer | 2 |
| 21***10 | Pin, Split | 2 |
| 51***03 | Pin, Spring | 2 |
A3-4-1 Fork And Frame, Class 3, Standard Lift
| 14***4Z | Washer | 2 |
| 21***10 | Pin, Split | 2 |
| 51***03 | Pin, Spring | 2 |
A3-5-1 Silage Fork, Folding, Sales Special
| 33***66 | Fork, Silage, Folding | 1 |
| 33***14 | Ram | 2 |
| 61***28 | Hose | 2 |
A3-1-1 Fork Frame And Tines, Standard Lift
| 14***4Z | Washer | 2 |
| 21***10 | Pin, Split | 2 |
| 51***03 | Pin, Spring | 2 |
B Bodywork, Cab, Loader End
B1-9-5 Fenders, Rear, Extension,620 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 12 |
| 13***8D | Setscrew, M10 X 30 | 14 |
| 13***3D | Nut, Self Lock M10 | 16 |
B1-15-1 Counterweight
| 13***4D | Bolt, M24x140mm Lg | 4 |
| 13***1D | Bolt, M24 X 220mm Long | 2 |
| 13***2D | Bolt, M24 X 240mm Long | 2 |
B1-20-2 Sound Proofing, Engine Cover
| 33***06 | Panel, Soundproofing, Lh Upper Door | 1 |
| 33***07 | Panel, Soundproofing, Rh Upper Door; Superseded To 33***87 On San101280 D.Jackson 17/11/09, Pritex Wiil Not Supply Individual Panels | 1 |
| 33***08 | Panel, Soundproofing; Superseded To 33***75 On San101280 D.Jackson 17/11/09, Pritex Will Not Supply Individual Panels | 2 |
B1-27-1 Tool Kit
| 40***17 | Grease, Hp, 400g X 24 | 1 |
| 82***02 | Bar, Tommy | 1 |
| 82***30 | Socket, Wheel Nut, 32mm A/F | 1 |
B1-33-1 Auto Greasing, Front Chassis, Installation Ht
| 13***3D | Setscrew, M10 X16mm | 2 |
| 13***5D | Setscrew, M10 X 20 | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
B1-25-1 Air Conditioning, Condenser
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***9D | Setscrew | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
B1-25-2 Air Conditioning, Condenser
| 13***9D | Setscrew | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
| 13***6D | Bolt, M8x70 | 1 |
B1-22-1 Guards, Rear Lights
| 33***24 | Guard, Rear Light | 2 |
B1-26-1 Guards, Front Light, Optional
| 33***22 | Guard, Front Light, Yellow | 2 |
| 33***09 | Guard, Front Light, Black | 2 |
B1-10-6 Fenders, Front, 20.5 R25 & 620 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
| 13***4D | Bolt, M12 X 60mm Long | 6 |
| 13***16 | Bolt | 6 |
B1-13-1 Guards, Rear Lights
| 13***7D | Screw, M6 X 25mm | 8 |
| 13***3D | Nut, M6 Lock | 8 |
| 14***6D | Washer, M6 Plain | 16 |
B1-6-1 Centre Pivot
| 13***3Z | Bolt | 6 |
| 14***7Z | Washer | 1 |
| 14***1Z | Washer, M16 Plain | 6 |
B1-20-1 Sound Proofing, Engine Cover
| 33***86 | Panel, Soundproofing, Lh Upper Door; Superseded To 33***06 On San100625, D. Jackson 07/04/09 Supplier Change | 1 |
| 33***87 | Panel, Soundproofing, Rh Upper Door; Superseded To 33***07 On San100625, D.Jackson 07/04/09 Supplier Change | 1 |
| 33***90 | Panel, Soundproofing, Lh Lower Door; Superseded To 33***09 On San100625, D.Jackson 07/04/09 Supplier Change | 1 |
B1-17-1 Corner Castings, Rear Chassis
| 13***5D | Bolt, M10x65 | 6 |
| 13***3D | Nut, Self Lock M10 | 6 |
| 14***8D | Washer, M10 | 12 |
B1-11-2 Toolbox, Engine Cover
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***1D | Setscrew, M8 X 12mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B1-7-1 Auxiliary Fuel Tank
| 12***91 | Washer, Nylon | 4 |
| 13***1D | Setscrew, M10x45 | 4 |
| 13***7D | Setscrew, M12 X 25 | 4 |
B1-12-16 Fenders, Rear, 20.5r25 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 30 |
| 13***8D | Setscrew, M10 X 30 | 16 |
| 13***9D | Setscrew, M10 X 35mm Long | 7 |
B1-4-1 Hose Clamp, Centre Pivot
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***1D | Bolt, M10 X110mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
B1-3-1 Steps And Light Arms
| 13***3D | Setscrew, M10 X16mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***9D | Setscrew, M10 X 35mm Long | 4 |
B1-10-1 Fenders, Front, 750 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
| 13***0D | Setscrew, M16 X 40mm | 6 |
| 13***3D | Nut, Self Lock M8 | 9 |
B1-12-11 Fenders, Tank Mounted
| 13***8D | Setscrew, M12 X 30 | 5 |
| 14***5D | Washer, Large | 6 |
| 33***02 | Fender, Tank Mounted, C/W Step | 1 |
B1-12-1 Fenders, Rear, 750 Tyres
| 12***91 | Washer, Nylon | 16 |
| 13***7D | Setscrew, M10 X 25mm Long | 34 |
| 13***8D | Setscrew, M10 X 30 | 16 |
B1-9-10 Fenders, Rear, Extension, 20.5r25 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 12 |
| 13***8D | Setscrew, M10 X 30 | 12 |
| 13***3D | Nut, Self Lock M10 | 12 |
B1-14-1 Mountings, Rear Lights
| 13***4D | Bolt | 2 |
| 14***3D | Washer, Large | 2 |
| 14***7D | Washer, M8 Plain | 2 |
B1-12-5 Fenders, Rear, 620 Tyres
| 12***91 | Washer, Nylon | 16 |
| 13***7D | Setscrew, M10 X 25mm Long | 34 |
| 13***8D | Setscrew, M10 X 30 | 16 |
B1-12-15 Fenders, Rear, 20.5r25 Tyres
| 12***91 | Washer, Nylon | 16 |
| 13***7D | Setscrew, M10 X 25mm Long | 34 |
| 13***8D | Setscrew, M10 X 30 | 16 |
B1-3-2 Step, Lh And Rh, And Rear
| 13***9D | Setscrew, M10 X 35mm Long | 8 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***1D | Setscrew, M10x45 | 2 |
B1-5-5 Mirror, Rear View
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 14***7D | Washer, M8 Plain | 8 |
B1-31-1 Auto Greasing, Rear Chassis
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 6 |
B1-19-1 Guard, Rear Axle
| 13***3D | Setscrew, M10 X16mm | 3 |
| 14***8D | Washer, M10 | 3 |
| 33***69 | Guard, Rear Axle | 1 |
B1-2-1 Chassis Rear
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***43 | Seal | 1 |
| 12***53 | Gauge, Sight | 1 |
B1-12-6 Fenders, Rear, 620 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 32 |
| 13***8D | Setscrew, M10 X 30 | 16 |
| 13***9D | Setscrew, M10 X 35mm Long | 7 |
B1-2-5 Chassis Rear, Closing Panels
| 13***5D | Setscrew, M8x20 | 6 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
B1-5-1 Cover & Grille, Cooling Bay
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***5D | Setscrew, M8x20 | 6 |
| 13***5D | Setscrew, M10 X 20 | 4 |
B1-10-2 Fenders, Front, 750 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
| 13***0D | Setscrew, M16 X 40mm | 6 |
| 13***3D | Nut, Self Lock M8 | 9 |
B1-8-1 Engine Cover
| 13***5D | Setscrew, M6 X 20mm Long | 11 |
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 15 |
B1-10-5 Fenders, Front, 20.5 R25 & 620 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 8 |
| 13***0D | Setscrew, M16 X 40mm | 6 |
| 13***3D | Nut, Self Lock M8 | 9 |
B1-12-2 Fenders, Rear, 750 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 34 |
| 13***8D | Setscrew, M10 X 30 | 16 |
| 13***9D | Setscrew, M10 X 35mm Long | 7 |
B1-9-1 Fenders, Rear, Extension,750 Tyres
| 13***7D | Setscrew, M10 X 25mm Long | 12 |
| 13***8D | Setscrew, M10 X 30 | 14 |
| 13***3D | Nut, Self Lock M10 | 16 |
B1-18-1 Belly Guards
| 13***8D | Setscrew, M10 X 30 | 12 |
| 13***6D | Bolt, M12x70 | 2 |
| 13***8D | Bolt, M12x80 | 2 |
B1-11-1 Toolbox, Engine Cover
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***5D | Setscrew, M8x20 | 8 |
| 13***3D | Nut, M6 Lock | 4 |
B1-12-10 Fender, Tank Mounted
| 13***8D | Setscrew, M12 X 30 | 4 |
| 14***5D | Washer, Large | 4 |
| 33***30 | Fender, Tank Mounted | 1 |
B1-1-1 Chassis Front
| 13***0D | Setscrew | 4 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
B1-33-5 Auto Greasing, Front Chassis, Hose & Pipework Ht
| 33***61 | Switch, Pressure 150 Bar | 1 |
| 33***03 | Harness, Pressure Switch | 1 |
| 33***61 | Tube, Corrugated, 1100mm Long | 1 |
B1-21-1 Fuel Sender
| 13***3D | Screw, M5x16 | 4 |
| 14***5D | Washer | 4 |
| 70***92 | Sender, Fuel | 1 |
B2-18-1 Seat Belt, 5000lb Seat
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 1 |
| 13***4Z | Bolt, 7/16"Unfx2"Long | 1 |
B2-35-2 Sound Proofing, Cab
| 33***86 | Panel, Soundproofing, Floor; Superseded To 33***39 On San101280 D.Jackson 17/11/09, Pritex Will Not Supply Individual Panels | 1 |
| 33***87 | Panel, Soundproofing, Floor; Superseded To 33***38 On San101280 D.Jackson 17/11/09, Pritex Will Not Supply Individual Panels | 1 |
| 33***88 | Panel, Soundproofing, Floor; Superseded To 33***37 On San101280 D.Jackson 17/11/09, Pritex Will Not Supply Individual Panels | 1 |
B2-16-1 Seat, Hi Spec, Air Suspension, Fabric
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B2-33-2 Seat, Components, Mech. Suspension, Fabric
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-33-1 Seat, Assembly, Mech. Suspension, Fabric
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B2-30-1 Cab Mountings
| 13***2D | Bolt, M24 X120mm Long | 4 |
| 33***90 | Mounting, Cab | 4 |
| 33***66 | Plate, Locking, M24 | 4 |
B2-21-1 Armrest
| 13***7D | Bolt | 1 |
| 14***8D | Washer, M10 | 2 |
| 16***97 | Clamp, Lever M10 | 1 |
B2-26-1 Fire Extinguisher
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 26***67 | Extinguisher, Fire, Excludes Cradle | 1 |
| 26***64 | G.A. | 1 |
B2-24-1 Seat, Air Suspension, Heated
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***7D | Washer, M8 Plain | 4 |
B2-1-1 Cab
| 12***40 | Plug, Blanking, 30mm | 6 |
| 24***15 | Grommet | 2 |
| 24***09 | Grommet | 2 |
B2-29-1 Guard Windscreen
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Bolt, M10 X 35mm Long | 6 |
| 13***0D | Bolt, M10 X 40mm Long | 4 |
B2-34-1 Seat, Assembly, Mech. Suspension, Vinyl
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B2-34-2 Seat, Components, Mech Suspension, Vinyl
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-28-1 Cover, Heater
| 13***1D | Nut, M8 | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 13***3D | Nut, Self Lock M10 | 1 |
B2-36-1 Glass Hammer
| 14***02 | Screw, No 8x1/2" | 2 |
| 15***02 | Ring, Key 20mm Diameter, Approx. | 1 |
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
B2-15-4 Seat, Cushion Kit, Heated
| 40***24 | Connector | 1 |
| 40***71 | Kit, Heated Cushion | 1 |
| 40***72 | Cushion, Seat | 1 |
B2-9-5 Cover, Switches, And Interior Light, Canopy Cab
| 13***5D | Setscrew, M8x20 | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***31 | Box, Switch And Interior Light, Canopy | 1 |
B2-7-1 Visor, Sun
| 13***7D | Screw, M6 X 25mm | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 26***61 | G.A. | 1 |
B2-32-1 Non Heated Mirror, Exterior
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 1 |
B2-4-1 Interior Mouldings
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 14***95 | Vent, Elbow | 4 |
B2-23-1 Seat, Air Suspension, Components
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-31-1 Mirror, Interior
| 12***71 | Mirror, Interior Assembly | 2 |
| 82***72 | Screw, M5 X 25 | 2 |
B2-9-1 Canopy, Cab
| 26***97 | Canopy | 1 |
| 82***81 | Nut, Rivet | 8 |
| 82***46 | Nut, Rivet | 4 |
B2-22-1 Seat, Air Suspension
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***7D | Washer, M8 Plain | 4 |
B2-13-1 Roof And Skirts, Cab
| 13***8D | Setscrew, M16 X 30mm | 4 |
| 13***0D | Setscrew, M16 X 40mm | 8 |
| 14***1D | Washer, M16 | 4 |
B2-25-1 Seat, Air Suspension, Heated, Components
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
B2-35-1 Sound Proofing, Cab
| 33***03 | Panel, Soundproofing; Superseded To 33***10 On San100627, D.Jackson 07/04/09 Supplier Change | 2 |
| 33***43 | Panel, Soundproofing, Floor,Rh Console; Superseded To 33***09 On San100627, D.Jackson 07/04/09 Supplier Change | 1 |
| 33***47 | Panel, Soundproofing, Rh Console; Superseded To 33***08 On San100627, D.Jackson 07/04/09 Supplier Change | 1 |
B2-5-1 Cab Glazing, Tinted, Sliding Window
| 33***35 | Pillar, Window | 4 |
| 33***62 | Panel, Lower, Left Side, Front | 1 |
| 33***63 | Panel, Lower. Right Side, Front | 1 |
B2-6-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-20-1 Recirculation Filter, And Ducting
| 14***04 | Screw | 4 |
| 30***90 | Diffuser, Air | 2 |
| 33***74 | Vent, Air(76.5mm Dia.Hole) | 2 |
B2-3-1 Window, Side, Opening
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***2D | Bolt | 1 |
| 13***3D | Nut, M6 Lock | 1 |
B2-10-1 Floormat
| 33***75 | Floormat | 1 |
| 33***76 | Plate | 1 |
| 82***29 | Screw, Countersunk, M6x35 | 4 |
B2-27-1 Cup Holder
| 13***3Z | Screw; Replaces 69***21 | 2 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
B2-8-1 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 13***3D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
B2-2-1 Cab Door
| 12***09 | Cap, Nut M8; Replaces 69***72 | 8 |
| 13***8D | Setscrew, M8 X 30mm | 4 |
| 13***6D | Bolt, M8x70 | 2 |
B3-1-2 Arm, Loader, &, Linkage, Ht
| 13***8D | Setscrew, M16 X 30mm | 10 |
| 13***0D | Setscrew, M16 X 40mm | 8 |
| 13***0D | Setscrew | 4 |
B3-14-1 Auto Greasing, Loader End, Ht
| 13***8D | Setscrew, M8 X 30mm | 6 |
| 13***2D | Bolt, M10 X 50mm | 2 |
| 13***9D | Bolt | 2 |
B3-6-1 Safety Strut, Optional
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 26***82 | Strut, Safety, Lift Ram | 1 |
B3-1-1 Arm, Loader, & Linkage, Ht
| 13***8D | Setscrew, M16 X 30mm | 10 |
| 13***0D | Setscrew, M16 X 40mm | 12 |
| 13***0D | Setscrew | 4 |
B5-1-1 Labels, Identity
| 33***23 | Label, Tyre Pressure, 434s | 1 |
| 33***89 | Decal, Engine Cover, 434s Agri | 2 |
| 81***22 | Decal, Jcb Insignia (Black) | 1 |
B5-4-1 Labels, Warning
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
B5-2-1 Labels
| 33***23 | Label, Tyre Pressure, 434s | 1 |
| 33***96 | Decal, Diesel Fuel | 1 |
| 33***33 | Decal, Engine Start | 1 |
B5-3-1 Labels, Cab
| 33***39 | Decal, Fuse/Relay Box; Superseded To 33***30 D.Jackson 07/03/08, San26039 (Pi R02879 Aa) Latest Symbols | 1 |
| 33***30 | Decal, Fuse/Relay Box | 1 |
| 33***33 | Decal, Engine Start | 1 |
B5-6-1 Labels, Warning, Iso En 474
| 33***24 | Decal, Warning, Crush Hazard | 1 |
| 33***28 | Decal, Warning, Hot Hazard | 2 |
| 33***29 | Decal, Warning, Start Engine From Operators Seat | 1 |
B5-10-1 Paint
| 42***01 | Thinners, 5 Litres | 1 |
| 42***01 | Paint, Black, 1 Lts, Semi-Gloss Enamel; San 10***16 | 1 |
| 42***02 | Paint, Black, 2.5 Lts, Semi-Gloss Enamel | 1 |
B5-7-1 Labels, Warning, Ansi En 474
| 33***36 | Decal, Warning, Keep A Safe Distance From Machine | 1 |
| 33***42 | Decal, Warning, Do Not Short Cross Terminals | 1 |
| 33***43 | Decal, Warning, Pressurized System | 1 |
B6-5-1 Homologation, Rear Number Plate, German & Italian
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Nut, M6 Lock | 2 |
B6-1-1 Homologation Parts, German
| 12***00 | Strap | 1 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***3Z | Nut | 4 |
B6-2-1 Homologation Parts, Italian
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 13***0D | Bolt, M16x100, Dacromet | 1 |
C Electrics-Machine, Cab & Engine
C1-23-1 Electrics Trailer, 12 Volt
| 13***3D | Screw, M5x16 | 5 |
| 13***7D | Setscrew M5x25 | 2 |
| 13***0D | Screw, M30 X 40mm | 1 |
C1-16-1 Light, Head, Right Hand Dip
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***09 | Light, & Side Repeater, Rh Dip, Lh Side | 1 |
C1-28-1 Earth Leads
| 13***5D | Setscrew, M10 X 20 | 1 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
C1-15-1 Light, Head, Left Hand Dip
| 26***48 | G.A., Ga Headlight Lh Dip | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 2 |
C1-40-1 Usb Data Link, Adaptor Kit
| 33***86 | Lead, Service Adapter, Hc11 | 1 |
| 71***65 | Case, Dla | 1 |
| 71***35 | Pc Usb Cable | 1 |
C1-11-1 Cctv Installation
| 13***3Z | Nut | 2 |
| 24***06 | Grommet, 16mm Diameter | 1 |
| 33***54 | Cover | 1 |
C1-27-1 Electrics, Emergency Steer
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***3D | Nut, M6 Lock | 5 |
C1-26-1 Electrics, Auxilliary Solenoids, Prop. Control. Superseded To C1-26-2
| 33***32 | Harness, Prop. Auxiliary. Control | 1 |
| 33***15 | Relay, 24v 30a | 1 |
| 70***13 | Cover, Auxiliary, Decal | 1 |
C1-3-1 Battery, Installation
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M10 X 30 | 3 |
| 13***2D | Bolt, M10 X 50 | 1 |
C1-20-1 Heated Mirror
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 24***03 | Grommet | 4 |
C1-23-2 Electrics Trailer, 12 Volt
| 13***3D | Screw, M5x16 | 3 |
| 13***7D | Setscrew M5x25 | 2 |
| 13***0D | Screw, M30 X 40mm | 1 |
C1-14-1 Light, Beacon, Hazard Warning, Optional
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***42 | Beacon, Assembly, 24 Volt, Inc. Bracket | 1 |
C1-1-1 Harnesses
| 33***51 | Harness, Engine, Tier 3 | 1 |
| 33***11 | Harness, Cab Panel | 1 |
| 33***46 | Harness, Rear Chassis | 1 |
C1-12-1 Work Light, Auxilliary
| 70***70 | Light, Working, Rear Body Mounted | 2 |
| 72***32 | Bulb, H3 24v 70w | 1 |
| 97***88 | Light, Working, Amber | 1 |
C1-11-5 Cctv Installation, Emc Certified
| 13***3Z | Nut | 2 |
| 24***06 | Grommet, 16mm Diameter | 1 |
| 33***54 | Cover | 1 |
C1-10-1 Cctv Installation
| 24***06 | Grommet, 16mm Diameter | 1 |
| 33***81 | Bracket, Monitor Mounting | 1 |
| 33***51 | Cover | 1 |
C1-1-6 Harnesses, Control Area Network, (Can)
| 33***73 | Harness, Can, 1250mm Long | 1 |
| 33***84 | Harness, Can, Cab | 1 |
| 72***01 | Connector, T Splitter | 1 |
C1-32-1 Pump, Auto Greasing
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 14***7D | Washer, M8 Spring | 4 |
C1-19-1 Horn, Single Tone
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-1-5 Harnesses, Control Area Network, (Can)
| 72***01 | Connector, T Splitter | 3 |
| 72***03 | Connector, Straight | 2 |
| 72***05 | Harness, Can, 3550mm Long | 1 |
C1-18-1 Alarm, Reverse
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-26-2 Electrics, Auxilliary Solenoids, Proportional Control
| 33***32 | Harness, Prop. Auxiliary. Control | 1 |
| 70***33 | Actuator, Auxiliary Hydraulics | 1 |
| 70***72 | Switch | 1 |
C1-3-2 Battery, Installation
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M10 X 30 | 3 |
| 13***2D | Bolt, M10 X 50 | 1 |
C1-17-1 Light Combination, Rear 24v
| 33***90 | Holder, Bulb | 2 |
| 33***10 | Holder, Bulb | 1 |
| 70***68 | Rear Cluster, With Reverse Light | 1 |
C1-18-5 Alarm, Reverse, Bbs
| 13***0D | Bolt | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
C1-21-1 "P" Clips
| 13***3D | Setscrew | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***5D | Setscrew, M8x20 | 1 |
C1-24-1 Harness Brackets
| 26***08 | Bracket, Mounting P Clip | 0 |
| 26***09 | Bracket, Mounting | 1 |
| 26***10 | Bracket, Mounting, Alternator Wiring | 0 |
C2-5-1 Alternator Mountings
| 02***02 | Screw, M8 X 20mm | 1 |
| 02***19 | Screw | 1 |
| 02***26 | Nut, Flange Head | 1 |
C2-1-3 Switches & Sensors
| 02***79 | Screw | 1 |
| 02***81 | Screw, Socket Head | 1 |
| 02***08 | O Ring | 1 |
C2-2-2 Engine Pre-Heat
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***5D | Setscrew, M10 X 20 | 1 |
| 14***6D | Washer, M6 Plain | 4 |
C2-4-1 Alternator
| 71***88 | Alternator, Assembly, 24v-70amp; May Be Used As An Alternative To 71***19. Change Harness Plug To Alternator Using 72***34 X 3 & 72***44,72***94,72***49 X 1, Alternator, Assembly, 24v-70amp | 1 |
C2-2-1 Alternator Cables
| 13***5D | Setscrew, M6 X 20mm Long | 1 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
C2-1-2 Module, Control Harness
| 02***82 | Screw, Caphead | 3 |
| 02***56 | Clip | 6 |
| 02***57 | Clip | 3 |
C2-4-2 Alternator Guard
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***1D | Nut, M8 | 3 |
C2-3-1 Motor,Starter, 24 Volt
| 02***72 | Screw, 12 Point Cap | 2 |
| 71***56 | Motor, Starter, 24v | 1 |
C2-1-1 Module, Engine Control
| 02***04 | Screw | 2 |
| 02***74 | Screw, M8 X 45 | 3 |
| 02***64 | Screw | 1 |
C2-6-1 Engine Block Heater, 120v
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
C3-1-1 Instrument Panel, 24 Volt
| 33***84 | Panel, Instrument, Including Software; Superseded To 33***58 D.Jackson 19/02/08, San25748 (Pi R00719 Ac) Software Update | 1 |
| 33***58 | Panel, Instrument, Including Software; Superseded To 33***79 D.Jackson 19/02/08, San25748 (Pi R02882 Aa) Software Update | 1 |
| 33***79 | Panel, Instrument, Including Software; Superseded To 33***48 On San26443 D.Jackson 15/09/08 ( Software Change) | 1 |
C3-2-1 Fuse Link Box
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***5D | Setscrew, M8x20 | 5 |
| 13***3D | Nut, M6 Lock | 1 |
C3-26-1 Light, Number Plate
| 33***07 | Bracket, Number Plate Mount | 1 |
| 33***53 | Numberplate Blanking | 1 |
| 70***00 | Light, 24 Volt, No. Plate | 2 |
C3-7-1 Motor, Wiper, Washer, Front And Rear
| 13***9D | Setscrew | 2 |
| 13***3D | Setscrew, M8 X 16mm | 4 |
| 14***1D | Washer, Large | 2 |
C3-21-1 Air Con Control
| 26***89 | Switch, Assembly, Incuding Knob | 1 |
| 26***91 | Switch, Assembly, Including Knob | 1 |
| 26***95 | Switch, Cable Assembly, Heater Control | 2 |
C3-12-1 Ashtray & Lighter
| 14***02 | Screw | 4 |
| 24***12 | Grommet, Panel Hole Dia 29mm, Panel Thk 2.8-3.5mm | 1 |
| 26***90 | Ashtray | 1 |
C3-24-1 Heater Control
| 26***89 | Switch, Assembly, Incuding Knob | 1 |
| 26***95 | Switch, Cable Assembly, Heater Control | 2 |
| 30***35 | Knob, Rotary Control; Superseded By 30/92***56, San23051 22/12/06,, S.Littlewood. Requested By John Banks. | 3 |
C3-6-1 Instrument Panel, Cab, 24 Volt
| 33***77 | Panel, Switch, Lh Dash | 1 |
| 33***30 | Panel, Switch Mounting; Superseded By 33***00 D.Jackson 03/05/07, San23359 (Duplicated By Design) | 1 |
| 33***00 | Panel, Switch, Rh Console | 1 |
C3-23-1 Heater Unit, Components
| 30***55 | Heater, Blower - Ac-2 | 1 |
| 30***43 | Chassis, Bulkhead, Blower | 1 |
| 30***44 | Clamp, Hose | 2 |
C3-3-1 Fuse And Relays
| 33***39 | Decal, Fuse/Relay Box; Superseded To 33***30 D.Jackson 07/03/08, San26039 (Pi R02879 Aa) Latest Symbols | 1 |
| 33***30 | Decal, Fuse/Relay Box | 1 |
| 33***15 | Relay, 24v 30a | 6 |
C3-2-2 Fuse Link Box
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***5D | Setscrew, M8x20 | 5 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
C3-30-1 Electrics, Auto Greasing
| 33***25 | Clamp | 1 |
| 33***26 | Harness, Cab | 1 |
| 33***27 | Unit, Display, Inc. Bracket | 1 |
C3-15-1 Work Lights Oval, Rear, 24 Volt
| 33***37 | Plate, Mounting, Rear Work Light | 1 |
| 70***47 | Light, Front Working,Lh, 24 Volt | 1 |
| 70***48 | Light, Front Working,Rh, 24 Volt | 1 |
C3-14-1 Work Lights Oval, Front, 24 Volt
| 26***87 | Cab, Electrics | 1 |
| 33***36 | Bracket | 1 |
| 70***47 | Light, Front Working,Lh, 24 Volt | 1 |
C3-11-1 Instrument Panel, Roof Mounted
| 33***48 | Panel, Switch, Roof Mounting | 1 |
| 33***24 | Panel, Stowage Box | 1 |
| 70***25 | Actuator, Beacon, Convoy Warning | 1 |
C3-25-1 Heater Hoses
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***7D | Setscrew, M8x25 | 3 |
| 13***7D | Setscrew, M12 X 25 | 1 |
C3-10-1 Light, Interior, Cab, 24 Volt
| 70***00 | Light, Interior | 1 |
| KH***92 | Bulb, 24v 10w | 1 |
C3-22-1 Air-Con, Installation
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
C3-8-1 Switch, Column
| 04***01 | Switch, Column | 1 |
| 13***3Z | Capscrew | 2 |
| 70***00 | Switch, Column Indicator | 1 |
C3-27-1 Livelink
| 13***1D | Bolt, M6x45mm Long | 3 |
| 13***3D | Nut, M6 Lock | 3 |
| 13***3D | Nut, Self Lock M8 | 2 |
C3-18-1 Radio Installation
| 26***84 | Plate, Clamping | 2 |
| 26***78 | G.A. | 1 |
| 71***00 | Aerial | 1 |
C3-17-1 In Cab Convertor, 24/12 Volt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut | 4 |
| 13***3Z | Capscrew | 2 |
C3-20-1 Air Con. Unit, Components
| 25***02 | Valve, Expansion | 1 |
| 30***55 | Heater, Blower - Ac-2 | 1 |
| 30***43 | Chassis, Bulkhead, Blower | 1 |
C3-16-1 Control Unit, Transmission
| 04***42 | Unit, Transmission Control | 1 |
| 33***39 | Unit, Control | 1 |
| 81***81 | Decal, Six Speed Selector | 1 |
C3-17-2 In Cab Convertor, 24/12 Volt
| 13***3D | Capscrew, M5 X 16 Lg | 2 |
| 14***5D | Washer | 2 |
| 33***40 | Convertor, 24/12 Volt(12amp); Superseded To 71***98 On San101095 P .Gamble 28/09/09 | 1 |
D Controls-Machine, Engine & Steering
D1-10-5 Multi-Lever, 3 Spool Components
| 33***93 | Plate, Mounting | 3 |
| 33***23 | Kit, Bracket For Magnet | 3 |
| 33***25 | Magnet | 3 |
D1-3-1 Valve Servo, Joystick Control, 3 Spool
| 13***3D | Setscrew | 5 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***5D | Screw, Cap M5 X 20 | 4 |
D1-12-1 Control, Tilt Reset, Ht
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 13***1D | Nut | 2 |
D1-11-1 Valve Servo, Joystick Control, Solenoid Operated Auxiliaries
| 13***3D | Setscrew | 5 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***5D | Screw, Cap M5 X 20 | 4 |
D1-9-1 Twin Auxiliary Lever, 24 Volt
| 13***8D | Bolt, M10 X 80 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***11 | Seal, Bonded | 2 |
D1-10-1 Multi-Lever, 3 Spool, Aux. Left
| 13***3D | Setscrew | 6 |
| 13***5D | Setscrew, M8x20 | 3 |
| 14***6D | Washer, M6 Plain | 6 |
D1-4-1 Servo Valve, Components,928/60033
| 25***54 | Kit-Plunger | 4 |
| 25***42 | Regulator | 1 |
| 25***43 | Regulator | 3 |
D1-8-1 Servo Valve, 3 Spool
| 12***59 | Ring, Tolerance | 1 |
| 12***55 | Knob, Base | 1 |
| 12***61 | Knob, Top | 1 |
D2-1-2 Control, Throttle, Electronic
| 13***3D | Setscrew | 1 |
| 13***3D | Nut, M6 Lock | 1 |
| 14***6D | Washer, M6 Plain | 1 |
D2-1-1 Control, Throttle, Electronic
| 26***00 | G.A, Base Unit Jcb 434, P117 | 1 |
| 26***81 | G.A, Elec Throttle | 1 |
| 70***17 | Pedal, Assembly, Throttle Control | 1 |
D3-1-1 Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
| 13***8D | Setscrew, M10 X 30 | 4 |
E Hydraulics & Air Including, Steering
E1-10-1 Hose And Pipework, Servo Controller, Loader, Under Cab
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E1-1-2 Circuit, Loader End
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***2D | Bolt, M10 X 50 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
E1-10-3 Hose And Pipework, Servo Controller, Loader, Under Cab
| 13***3D | Setscrew | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E1-9-3 Hose And Pipework, Servo Controller, Loader, Solenoid Aux. On Valve Block
| 14***11 | Seal, Bonded | 6 |
| 16***02 | Adapter, 1/4" Bsp M/M | 6 |
| 25***00 | Valve, Servo, Loader Control | 1 |
E1-4-1 Circuit, Loader End, Auxiliary
| 13***8D | Bolt, M10 X 80 | 2 |
| 13***4Z | Nut | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
E1-10-4 Pipework, Cluster, Servo Controller, Loader, Under Cab
| 14***4D | Washer, Lock 1/2" | 8 |
| 33***65 | Plate, Floor, Servo Hoses | 1 |
| 81***05 | Adaptor, Bulkhead M/M | 8 |
E1-24-1 Hose And Pipework, Solenoid Prop., Pilot Valve, 3 Spool
| 16***02 | Adapter | 4 |
| 24***05 | O Ring | 4 |
| 25***07 | Assembly, Prop. Pilot Valve | 1 |
E1-15-1 Hose And Pipework, Fan Motor, Cooling Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***5D | Screw, 5/16 X 7/8" | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
E1-0-2 O Rings, Air Con Hoses
| 82***67 | O Ring, No 12, Air Con System | 1 |
| 99***60 | O Ring, No.8 | 1 |
| 99***61 | O Ring, No.6; Replaces 99***00 | 1 |
E1-26-2 Hose And Pipework, Auxiliary, Solenoid, Accumulator
| 14***08 | Seal, Washer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 16***50 | Adaptor | 1 |
E1-8-1 Circuit, Loader End, Parallel Lift
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-17-1 Hose And Pipework, Steer Valve
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 4 |
| 16***54 | Adapter, 1/2bsp X 3/4 Sae | 4 |
E1-45-1 Hose And Pipework, Isolator Valve
| 13***0D | Bolt, M6x40 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E1-23-2 Hose And Pipework, Loader Valve
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***2D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-9-2 Hose And Pipework, Servo Controller, Loader, 4 Spool
| 14***11 | Seal, Bonded | 10 |
| 16***02 | Adapter, 1/4" Bsp M/M | 10 |
| 33***64 | Pipe, Assembly, Servo Control | 1 |
E1-15-5 Hose And Pipework, Reverse Fan Motor, Cooling Bay
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 6 |
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***8D | Setscrew, M10 X 30 | 1 |
E1-25-2 Hose And Pipework, Solenoid, Prop., Pilot Valve, 4 Spool
| 13***8D | Capscrew, M8 X 80mm, Grade 12.9 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 16***02 | Adapter | 6 |
E1-21-1 Filter, Hydraulic
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 32***03 | Bridge | 1 |
E1-19-1 Filter, Hydraulic, Return Pipe
| 13***5D | Setscrew, M8x20 | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
E1-23-1 Hose And Pipework, Loader Valve
| 13***9D | Capscrew, M12 X 35lg | 16 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***9D | Washer, M12 Spring | 8 |
E1-20-1 Hose And Pipework, Hydraulic Oil Cooler
| 13***8D | Setscrew, M10 X 30 | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
| 13***8D | Capscrew, M10x30 | 8 |
E1-29-2 Hose And Pipework, Main Pump
| 13***8D | Setscrew, M12 X 30 | 4 |
| 13***3D | Capscrew | 8 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
E1-11-1 Hose And Pipework, Test Points
| 14***08 | Seal, Washer | 3 |
| 16***01 | Adapter | 3 |
| 16***50 | Adaptor | 3 |
E1-7-1 Circuit, Loader End, Auxiliary, Super High Lift
| 13***6D | Bolt, M8x70 | 2 |
| 13***8D | Bolt, M10 X 80 | 4 |
| 13***4Z | Nut | 2 |
E1-28-1 Hose And Pipework, Quickhitch Locking
| 13***3D | Setscrew | 1 |
| 13***2Z | Screw, M6 X 50 | 2 |
| 13***1D | Setscrew, M8 X 12mm | 1 |
E1-30-1 Hose And Pipework, Brake/Gear Pump
| 02***06 | Gasket, Hydraulic Pump | 1 |
| 02***24 | Gasket, Hydraulic Pump | 1 |
| 13***7D | Capscrew, M10 | 2 |
E1-3-2 Hose And Pipework, Diverter Valve
| 13***5D | Setscrew, M8x20 | 2 |
| 13***2D | Screw, Cap, M5x50 | 2 |
| 14***5D | Washer | 2 |
E1-0-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-26-1 Hose And Pipework, Auxiliary, Solenoid, Accumulator
| 13***0D | Setscrew, M10 X 40mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***08 | Seal, Washer | 1 |
E1-18-1 Hose And Pipework, Steer Rams
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 3 |
| 13***3D | Nut, Self Lock M8 | 3 |
| 14***7D | Washer, M8 Plain | 6 |
E1-14-2 Hose And Pipework, Load Suspension
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 8 |
| 14***11 | Seal, Bonded | 2 |
E1-10-2 Hose And Pipework, Servo Controller, Loader, Under Cab
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 17***01 | Plug, 7/16"Unf, O Ring Boss | 1 |
E1-24-2 Hose And Pipework, Solenoid, Prop., Pilot Valve, 3 Spool
| 13***8D | Capscrew, M8 X 80mm, Grade 12.9 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 16***02 | Adapter | 4 |
E1-50-1 Hose And Pipework, Transmission
| 16***61 | Adapter, M/M | 2 |
| 61***31 | Hose | 1 |
| 61***14 | Hose, Bottom Rad. | 1 |
E1-9-1 Hose And Pipework, Servo Controller, Loader, 3 Spool
| 14***11 | Seal, Bonded | 8 |
| 16***02 | Adapter, 1/4" Bsp M/M | 8 |
| 33***64 | Pipe, Assembly, Servo Control | 1 |
E1-25-1 Hose And Pipework, Solenoid Prop., Pilot Valve, 4 Spool
| 13***8D | Capscrew, M8 X 80mm, Grade 12.9 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 16***02 | Adapter | 6 |
E1-3-1 Hose And Pipework, Diverter Valve
| 13***5D | Setscrew, M8x20 | 2 |
| 13***2D | Screw, Cap, M5x50 | 2 |
| 14***5D | Washer | 2 |
E1-1-1 Circuit, Loader End
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-29-1 Hose And Pipework, Main Pump
| 13***8D | Setscrew, M12 X 30 | 4 |
| 13***9D | Bolt, Grade 12.9 | 4 |
| 13***3D | Capscrew | 8 |
E1-27-1 Hose And Pipework, Emergency Steer
| 13***7D | Setscrew, M8x25 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***7D | Washer, M8 Plain | 4 |
E1-14-1 Hose And Pipework, Load Suspension
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 8 |
| 14***11 | Seal, Bonded | 2 |
E1-19-2 Filter, Hydraulic, Return Pipe
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***9D | Bolt | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
E1-30-2 Hose And Pipework, Brake/Gear Pump
| 02***06 | Gasket, Hydraulic Pump | 1 |
| 13***7D | Capscrew, M10 | 2 |
| 14***8D | Washer, M10 | 2 |
E1-28-2 Hose And Pipework, Quickhitch Locking
| 13***3D | Setscrew | 1 |
| 13***2Z | Screw, M6 X 50 | 2 |
| 13***1D | Setscrew, M8 X 12mm | 1 |
E2-7-1 Motor, Reverse Fan
| 20***07 | Motor, Reverse Fan | 1 |
| 33***78 | Kit-Seal | 1 |
| 33***80 | Valve, Proportional Relief | 1 |
E2-4-2 Gear Pump
| 02***06 | Gasket, Hydraulic Pump | 1 |
| 13***7D | Capscrew, M10 | 2 |
| 14***8D | Washer, M10 | 2 |
E2-2-1 Pump, Main Hydraulic, Components
| 20***18 | O Ring | 6 |
| 20***25 | Pump, Twin, 60cc | 1 |
| 20***08 | Valve, Pilot, Dfr 1 | 2 |
E2-4-1 Gear Pump
| 02***06 | Gasket, Hydraulic Pump | 1 |
| 13***7D | Capscrew, M10 | 2 |
| 14***8D | Washer, M10 | 2 |
E2-1-1 Pump, Main Hydraulic, Valve And Adapters
| 04***47 | Seal, 130mm X 3mm | 1 |
| 13***8D | Setscrew, M12 X 30 | 4 |
| 13***9D | Bolt, Grade 12.9 | 4 |
E2-3-1 Pump, Emergency Steer
| 20***09 | Pump, Emergency Steer; Superseded By 33***92 D.Jackson 22/05/08, San26158 (Pi R00719 Ac) No Thermal Cut-Out | 1 |
| 25***63 | Kit, Motor | 1 |
| 25***64 | Kit, Brush | 1 |
E3-21-1 Valve, Sections, Priority Steer
| 25***94 | Valve, Section, Priority Steer | 1 |
| 25***78 | Spring, Compensator | 1 |
| 25***79 | Spring, Compensator, Inner | 1 |
E3-10-1 Valve And Adapters, Steering
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
E3-22-1 Valve Assembly, Priority Steer
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
E3-4-2 Valve And Adapters, 25/213700,4 Spool,Ht
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***2D | Bolt, M10 X 50 | 2 |
| 13***3D | Nut, Self Lock M10 | 4 |
E3-34-2 Valve, Adaptors, 4 Spool Ht, 332/V1134
| 13***8D | Setscrew, M12 X 30 | 3 |
| 14***9D | Washer, M12 | 3 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 8 |
E3-33-1 Valve Assembly, 3 Spool, Ht, 332/V1133
| 33***33 | Valve, Assembly, 3 Spool Ht | 1 |
E3-10-5 Valve And Adapters, Steering, Option, 620/75/R26 & 750/65/R26 Tyres
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
E3-20-5 Lubricants & Filters
| 26***33 | G.A. | 1 |
| 40***1A | Oil, Ls Gear, 5 Litres | 1 |
| 40***02 | Oil, Ls Gear, 25 Litres | 1 |
E3-33-2 Valve, Adaptors, 3 Spool Ht, 332/V1133
| 13***8D | Setscrew, M12 X 30 | 3 |
| 14***9D | Washer, M12 | 3 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 8 |
E3-12-1 Valve Assembly, 25/222708, 4 Station Prop. Pilot Valve
| 13***8D | Capscrew, M8 X 80mm, Grade 12.9 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 25***89 | Solenoid | 4 |
E3-20-1 Filter, Hydraulic
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 32***03 | Bridge | 1 |
E3-3-4 Valve Assembly, 3 Spool & Adapters, Hi-Lift
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
E3-11-1 Valve Components, Steering
| 35***03 | Pin | 1 |
| 35***04 | Ball, Check | 2 |
| 35***05 | Plug, Anti-Cavitation | 2 |
E3-9-1 Valve Assembly, 25/222707, 2 Station Prop. Pilot Valve
| 13***8D | Capscrew, M8 X 80mm, Grade 12.9 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 25***89 | Solenoid | 2 |
E3-3-1 Valve Assembly, 25/213600,3 Spool,Ht
| 25***01 | Valve, Section, Bucket | 1 |
| 25***01 | Kit, Section, Sealing | 1 |
| 25***01 | Body, Assembly, Inlet | 1 |
E3-3-3 Valve Components, 25/213600,3 Spool Ht
| 25***01 | Valve, Section, Bucket | 1 |
| 25***02 | Valve, Relief, 1800 Psi-125 Bar | 1 |
| 25***01 | Kit, Section, Sealing | 2 |
E3-4-3 Valve Components, 25/213700,4 Spool Ht
| 25***01 | Valve, Section, Bucket | 1 |
| 25***02 | Valve, Relief, 1800 Psi-125 Bar | 1 |
| 25***01 | Kit, Section, Sealing | 2 |
E3-3-2 Valve And Adapters, 25/213600,3 Spool,Ht
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***2D | Bolt, M10 X 50 | 2 |
| 13***3D | Nut, Self Lock M10 | 4 |
E3-8-1 Isolator Valve, 25/222746
| 13***0D | Bolt, M6x40 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E3-1-1 Valve, Load Suspension
| 25***27 | Valve, Ride Control; V19 | 1 |
| 25***69 | Housing | 1 |
| 25***70 | Socket | 1 |
E3-4-1 Valve Assembly, 25/213700,4 Spool,Ht
| 25***01 | Valve, Section, Bucket | 1 |
| 25***01 | Kit, Section, Sealing | 1 |
| 25***01 | Body, Assembly, Inlet | 1 |
E3-34-1 Valve Assembly, 4 Spool, Ht, 332/V1134
| 33***34 | Valve, Assembly, 4 Spool Ht | 1 |
| 33***83 | Valve, Section, Motor Spool | 1 |
E3-25-1 Aux. Service, Aux. Relief Valves
| 25***01 | Kit-Seal | 1 |
| 25***03 | Valve, Auxiliary. Relief | 1 |
E4-3-2 Ram, Tilt
| 33***82 | Kit-Seal | 1 |
| 33***85 | Rod | 1 |
| 33***86 | Cap | 1 |
E4-3-1 Ram, Tilt
| 23***06 | O Ring, 60 X 5.0 | 4 |
| 23***12 | O Ring, 90 X 5.0 | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 2 |
E4-1-1 Ram, Steering
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***01 | Washer, Aluminium | 6 |
E4-6-1 Ram, Quickhitch
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-2-2 Ram, Lift
| 33***19 | Kit-Seal | 1 |
| 33***92 | Nut | 1 |
| 33***93 | Rod | 1 |
E4-1-2 Ram, Steering
| 33***85 | Kit-Seal | 1 |
| 33***90 | Cap | 2 |
| 33***91 | Piston Head | 1 |
E4-2-1 Ram, Lift
| 23***14 | O Ring | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 2 |
| 24***39 | Seal, Piston | 2 |
F Axles, Wheels & Transmission
F1-4-2 Hub Assembly, Front, Pr12, 332/P6440
| 10***00 | Disc, Brake | 8 |
| 10***79 | Plug, C/W O Ring | 2 |
| 10***94 | Spring | 2 |
F1-4-1 Hub Assembly, Front, Pr12, 10/300161
| 10***00 | Disc, Brake | 8 |
| 10***79 | Plug, C/W O Ring | 2 |
| 10***94 | Spring | 2 |
F1-8-2 Hub Assembly, Front, Pr12, 332/P6460
| 10***00 | Disc, Brake | 8 |
| 10***79 | Plug, C/W O Ring | 2 |
| 10***94 | Spring | 2 |
F1-1-1 Axle Assembly, Front, Pr12, 10/300161, Data Plate Ref.3286063
| 10***61 | Axle, Front, Pr12 B.O.; Superseded To 33***40 On San100930 D.Jackson 29/07/09, Pi R01129aa | 1 |
| 10***86 | Adapter, Elbow, 90 Degree | 2 |
| 13***1D | Nut | 8 |
F1-6-1 Axle Assembly,L.S.D., Front Pr12,10/300163, Plugs & Shafts
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
| 10***03 | Breather | 1 |
F1-3-1 Differential, Front Pr12,10/300161, Housing Assembly
| 10***02 | Differential, Assembly | 1 |
| 10***03 | Gear, Crownwheel & Pinnion | 1 |
| 10***05 | Rivet | 2 |
F1-8-1 Hub Assembly, Front, Pr12, 10/300163
| 10***00 | Disc, Brake | 8 |
| 10***79 | Plug, C/W O Ring | 2 |
| 10***94 | Spring | 2 |
F1-5-2 Axle Assembly, Front, Lsd, Pr12, 332/P6460, Data Plate Ref : 3485333
| 10***86 | Adapter, Elbow, 90 Degree | 2 |
| 13***1D | Nut | 8 |
| 14***4D | Washer | 16 |
F1-1-2 Axle Assembly, Front, Pr12, 332/P6440, Data Plate Ref : 3485273
| 10***86 | Adapter, Elbow, 90 Degree | 2 |
| 13***1D | Nut | 8 |
| 14***4D | Washer | 16 |
F1-5-1 Axle Assembly, Front, Lsd, Pr12, 10/300163, Data Plate Ref.3286083
| 10***63 | Axle, Front, Lsd Pr12 B.O.; Superseded To 33***60 On San100930 D.Jackson 29/07/09, Pi P01129aa | 1 |
| 10***86 | Adapter, Elbow, 90 Degree | 2 |
| 13***1D | Nut | 8 |
F1-2-1 Axle Assembly, Front Pr12,10/300161, Plugs & Shafts
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
| 10***03 | Breather | 1 |
F1-7-1 Differential,L.S.D., Front Pr12,10/300163, Housing Assembly
| 10***70 | Housing, Assembly, Differential | 1 |
| 10***03 | Gear, Crownwheel & Pinnion | 1 |
| 10***04 | Differential, Assembly, L.S.D. | 1 |
F2-6-1 Hub Assembly, Lsd, Rear Pr12,10/300195
| 10***00 | Disc, Brake | 8 |
| 10***76 | Cover, End, Jcb | 2 |
| 10***80 | Plate, Pressure | 2 |
F2-4-1 Axle Assembly, Lsd, Rear Pr12,10/300195, Data Plate Ref. 3289693
| 10***95 | Axle, Assembly, Rear, Lsd, Pr12, Heavy Duty; Superseded To 33***73 On San100930 D.Jackson 29/07/09, Pi P01129aa | 1 |
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
F2-1-1 Axle Assembly, Rear Pr12,10/300196, Data Plate Ref. 3291503
| 10***96 | Axle, Assembly, Rear, Pr 12 H/Duty; Superseded To 33***72 On San100930 D.Jackson 29/07/09, Pi P01129aa | 1 |
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
F2-3-2 Hub Assembly, Rear, Pr12, 332/P6472
| 10***00 | Disc, Brake | 8 |
| 10***76 | Cover, End, Jcb | 2 |
| 10***80 | Plate, Pressure | 2 |
F2-24-1 Axle Pivot, Rear, H/Duty Axles
| 13***4D | Bolt, M20 X 60mm | 6 |
| 13***8D | Bolt, M16 X 80mm | 8 |
| 13***22 | Capscrew, M16 X 120mm | 8 |
F2-1-2 Axle Assembly, Rear, Pr12, 332/P6472, Data Plate Ref : 3485353
| 10***01 | Plug, Drain | 1 |
| 10***02 | Plug, Oil Level | 1 |
| 10***03 | Breather | 1 |
F2-5-1 Differential,L.S.D., Rear Pr12,10/300195, 332/P6473
| 10***85 | Washer, Thrust | 2 |
| 10***86 | Pinion, Spider | 1 |
| 10***87 | Washer | 4 |
F2-3-1 Hub Assembly, Rear, Pr12, 10/300196
| 10***00 | Disc, Brake | 8 |
| 10***76 | Cover, End, Jcb | 2 |
| 10***80 | Plate, Pressure | 2 |
F2-4-2 Axle Assembly, Lsd, Rear Pr12,332/P6473, Data Plate Ref : 3485363
| 10***01 | Plug, Drain | 2 |
| 10***02 | Plug, Oil Level | 1 |
| 10***03 | Breather | 1 |
F2-2-1 Differential, Rear Pr12,10/300196, 332/P6472
| 10***85 | Washer, Thrust | 2 |
| 10***86 | Pinion, Spider | 1 |
| 10***87 | Washer | 4 |
F2-6-2 Hub Assembly, Lsd, Rear Pr12, 332/P6473
| 10***00 | Disc, Brake | 8 |
| 10***76 | Cover, End, Jcb | 2 |
| 10***80 | Plate, Pressure | 2 |
F3-2-1 Wheels & Tyres, Single Piece Rim, Michelin 750/65r26
| 15***01 | Valve | 1 |
| 26***20 | Wheel, And Tyre Assembly, Michelin Megaxbib | 1 |
| 41***16 | Wheel, Dw25a X 26 | 1 |
F3-1-1 Wheels & Tyres, Single Piece Rim, Goodyear 750/65r26
| 15***01 | Valve | 1 |
| 26***52 | Wheel, And Tyre Assembly, Goodyear 75***26 | 1 |
| 41***16 | Wheel, Dw25a X 26 | 1 |
F3-4-1 Wheels & Tyres, Single Piece Rim, Michelin 620/75r26
| 15***01 | Valve | 1 |
| 26***22 | Wheel, And Tyre Assembly, Michelin Mega Xbib | 1 |
| 41***76 | Wheel, Dw20a X 26 (-5 | 1 |
F3-3-1 Wheels & Tyres, Single Piece Rim, Goodyear 620/75r26
| 15***01 | Valve | 1 |
| 33***10 | Wheel, And Tyre Assembly, Goodyear Dt82 | 1 |
| 41***76 | Wheel, Dw20a X 26 (-5 | 1 |
F4-1-1 Propshafts, Transmission
| 11***25 | Strap | 8 |
| 13***9D | Bolt, Grade 12.9 | 2 |
| 13***3D | Nut | 10 |
F5-6-1 Coupling Group, First
| 04***69 | O Ring | 1 |
| 04***70 | O Ring | 1 |
| 04***71 | Spring, Cup | 7 |
F5-3-1 Transmission, Mounting
| 13***8D | Setscrew, M10 X 30 | 8 |
| 13***3D | Bolt | 2 |
| 13***7D | Bolt | 4 |
F5-21-1 Dipstick, Transmission
| 04***47 | Dipstick | 1 |
| 04***23 | Gasket | 1 |
| 13***9D | Setscrew, M8x35 | 2 |
F5-7-1 Coupling Group, Second
| 04***69 | O Ring | 1 |
| 04***71 | Spring, Cup | 7 |
| 04***72 | Ring, Retaining | 1 |
F5-14-1 Power Take-Off
| 04***44 | Shaft, Pump | 1 |
| 04***45 | Ring, Retaining | 1 |
| 04***46 | Plate, Cover | 1 |
F5-5-2 Torque Converter, Drive Plates (3)
| 04***05 | Bolt | 18 |
| 04***67 | Washer | 8 |
| 04***70 | Plate, Drive | 1 |
F5-5-1 Torque Converter, Drive Plates (2)
| 04***05 | Bolt | 18 |
| 04***67 | Washer | 8 |
| 04***70 | Plate, Drive | 1 |
F5-12-1 Output Group
| 04***84 | Bearing, Roller | 2 |
| 04***01 | Guard, Seal, Output Shaft | 1 |
| 04***40 | Washer | 2 |
F5-1-1 Transmission, Assembly
| 04***38 | Transmission, Complete; Superseded By 33***30 D.Jackson 21/11/07, San25494 (Pi R01374 Aa) Transmission Facelift | 1 |
| 13***8D | Setscrew, M10 X 30 | 12 |
| 13***9D | Capscrew, M10x35 | 4 |
F5-4-1 Blanking Plate, Emergency Steer
| 04***44 | Cover | 1 |
| 04***26 | Screw, M8x18 | 8 |
| 04***57 | Gasket | 1 |
F5-8-1 Coupling Group, Third
| 04***69 | O Ring | 1 |
| 04***71 | Spring, Cup | 1 |
| 04***72 | Ring, Retaining | 1 |
F5-16-1 Gearshift System, Valve Components
| 04***60 | Orifice | 6 |
| 04***61 | Piston | 6 |
| 04***62 | Plug | 8 |
F5-24-1 Pipework, Gearbox Housing
| 04***92 | Pipe, Oil | 1 |
| 04***93 | Capscrew, M8 | 2 |
| 04***94 | Pipe, Oil | 1 |
F5-2-1 Gearbox Housing
| 04***07 | Capscrew | 3 |
| 04***23 | Screw | 2 |
| 04***28 | Nut | 12 |
F5-10-1 Coupling Group, Forward
| 04***69 | O Ring | 1 |
| 04***72 | Ring, Retaining | 1 |
| 04***73 | Ring, Snap | 1 |
F5-23-1 Oil Pump
| 04***16 | Screw, M10 | 10 |
| 20***83 | Pump, Gear; Was 0501-214-216 D.Jackson 23/04/07 | 1 |
| 82***61 | Ring; Zf Reference Changed From 0501-317-937, D.Jackson 19/12/07 | 1 |
F5-18-1 Pressure Regulator
| 04***86 | Valve | 1 |
| 04***87 | Piston | 1 |
| 04***88 | Plate, Pressure | 1 |
F5-19-1 Senders, Transmission
| 04***17 | O Ring | 1 |
| 04***20 | Cap, Sealing | 1 |
| 04***58 | Screw, Cap | 1 |
F5-17-1 Gearshift System, Plates And Gaskets
| 04***77 | Gasket | 1 |
| 04***78 | Screen | 6 |
| 04***80 | Gasket | 1 |
F5-20-1 Filter, Transmission Oil
| 04***46 | O Ring; Superseded To 33***31 On San100877, D.Jackson 07/07/09 ( Instruction From Zf ) | 2 |
| 32***97 | Element, Filter; Superseded By 32/92***05 D.Jackson 12/10/06, San22941 | 1 |
| 32***38 | Cover, Filter Head | 1 |
F5-15-1 Gearshift System
| 04***49 | Gasket | 1 |
| 04***50 | Plate, Intermediate | 1 |
| 04***51 | Gasket | 1 |
F5-11-1 Coupling Group, Reverse
| 04***69 | O Ring | 1 |
| 04***72 | Ring, Retaining | 1 |
| 04***73 | Ring, Snap | 1 |
F5-9-1 Coupling Group, Fourth
| 04***69 | O Ring | 1 |
| 04***71 | Spring, Cup | 7 |
| 04***72 | Ring, Retaining | 1 |
F5-25-1 Blanking Plugs
| 04***53 | O Ring | 2 |
| 04***82 | Plug | 1 |
| 04***83 | O Ring | 1 |
F5-22-1 Input Group
| 04***25 | Shaft, Input | 1 |
| 04***18 | Ring, Snap | 1 |
| 04***49 | Ring, Piston | 1 |
F6-1-1 Cooler, Oil, Transmission
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***8D | Capscrew, M10x30 | 8 |
| 14***8D | Washer, M10 | 4 |
F6-3-1 Hose And Pipework, Transmission By-Pass
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***7D | Setscrew, M20x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G Brakes
G1-2-1 Valve, Brake
| 15***01 | Kit, Seal | 1 |
| 25***64 | Valve, Brake | 1 |
G1-3-2 Brake, Parking, Control
| 13***5D | Setscrew, M8x20 | 3 |
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
G1-7-1 Brake Caliper, Parking
| 13***3D | Bolt | 4 |
| 13***8D | Bolt | 2 |
| 13***3D | Nut, M6 Lock | 1 |
G1-8-2 Brake,Parking, Caliper Components
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
| 15***03 | Kit-Pad, Brake Pad | 1 |
| 15***89 | Kit-Bolt, Torx Head | 1 |
G1-5-2 Brake, System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***9D | Bolt, M10 X 35mm Long | 1 |
G1-4-1 Brake Pedal
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt, M10 X 100 | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 4 |
G1-8-1 Brake,Parking, Caliper Components
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
| 15***03 | Kit-Pad, Brake Pad | 1 |
| 15***72 | Caliper,Parkbrake | 1 |
G1-3-1 Brake, Parking, Control
| 13***5D | Setscrew, M8x20 | 5 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
| 13***1D | Setscrew, M8x45 | 1 |
G1-5-1 Brake, System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M10 X 30 | 1 |
G1-1-1 Valve, Brake
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***04 | Adapter, Male/Female | 1 |
G1-8-3 Brake, Parking, Caliper Components
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
| 15***89 | Kit-Bolt, Torx Head | 1 |
| 15***90 | Kit-Lever | 1 |
U Engine Qsb6.7 Tier 3 Emissions
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***43 | Circlip | 12 |
| 02***09 | Kit-Wear Sleeve, Front | 1 |
| 02***59 | Kit-Wear Sleeve, Rear | 1 |
U1-7-1 Flywheel & Housing
| 02***30 | Kit-Seal, Rear Oil | 1 |
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
U1-1-1 Engine, Complete, Qsb 6.7l 220bhp
| 01***16 | Engine, Assembly Qsb 6.7l, Turbocharged | 1 |
| 26***00 | G.A, Base Unit Jcb 434, P117 | 1 |
| 26***06 | G.A, Eng & Trans, Jcb 434s - P117 | 1 |
U1-6-2 Rear Housing, Camshaft & Gear
| 02***39 | Dowel, Pin | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***65 | Screw, M12 X 30 | 1 |
U1-1-2 Engine, Complete, Qsb 6.7l 220bhp
| 26***00 | G.A, Base Unit Jcb 434, P117 | 1 |
| 26***06 | G.A, Eng & Trans, Jcb 434s - P117 | 1 |
| 33***61 | Engine, Complete, Qsb 6.7l 220bhp | 1 |
U1-3-1 Block Assembly
| 02***07 | Plug, Expansion, D=26mm | 1 |
| 02***08 | Plug, Expansion, 17.73mm | 2 |
| 02***09 | Thimble | 14 |
U1-8-1 Engine Mountings
| 13***2D | Bolt | 2 |
| 13***3D | Nut, M16 | 2 |
| 13***0D | Capscrew | 6 |
U1-6-1 Gear Cover, Front
| 02***62 | Screw | 6 |
| 02***74 | Screw, M8 X 45 | 7 |
| 02***81 | Dowel, Ring | 2 |
U1-1-3 Engine, Complete, Qsb 6.7l 220bhp
| 26***00 | G.A, Base Unit Jcb 434, P117 | 1 |
| 26***06 | G.A, Eng & Trans, Jcb 434s - P117 | 1 |
| 33***21 | Engine, Complete, Qsb 6.7l 220bhp | 1 |
U1-5-1 Fans, Pulleys, & Fan Belt
| 02***31 | Housing, Assembly, Fan Drive | 1 |
| 02***32 | Bearing | 1 |
| 02***33 | Circlip | 2 |
U1-6-3 Timing Case, Auxiliary Drive
| 02***85 | Gasket | 1 |
| 02***88 | Bearing, Roller | 1 |
| 02***90 | Gear, Accessory Drive | 1 |
U1-1-4 Engine, Complete, Qsb 6.7l 220bhp
| 26***00 | G.A, Base Unit Jcb 434, P117 | 1 |
| 26***06 | G.A, Eng & Trans, Jcb 434s - P117 | 1 |
| 33***16 | Engine, Complete Less Fuel Pre-Filter, Qsb 6.7l 220bhp | 1 |
U2-4-1 Lifting Plates
| 02***05 | Bolt | 2 |
| 02***87 | Screw | 2 |
| 02***22 | Screw, Flange Head, M10 X 25 | 4 |
U2-5-1 Crankcase Breather
| 02***26 | Hose, Plain | 1 |
| 02***55 | O Ring | 1 |
| 02***15 | Seal, O Ring | 2 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***81 | Valve, Overflow | 12 |
| 02***21 | Nut, 3/8"-24unf, Heavy Hexagon | 2 |
| 02***22 | O Ring | 4 |
U2-3-1 Rocker Cover
| 02***46 | Nut | 6 |
| 02***47 | Cap, Filler | 1 |
| 02***48 | Gasket, Filler Cap | 1 |
U2-1-1 Cylinder Head
| 02***07 | Plug, Expansion, D=26mm | 13 |
| 02***15 | Plug, Pipe, 1/2"Npt | 4 |
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
U3-1-1 Manifold, Induction, & Heater Element
| 02***10 | Screw, Flange Head, M8 X 50mm | 1 |
| 02***75 | Screw, M8 X 90 | 2 |
| 02***98 | Screw | 1 |
U3-4-1 Exhaust System
| 02***73 | Clamp, D=81.8 | 2 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***3D | Nut, Self Lock M10 | 8 |
U3-2-1 Manifold,Exhaust
| 02***85 | Screw | 3 |
| 02***83 | Screw, Flange Head Cap | 12 |
| 02***58 | Spacer, Mounting | 12 |
U3-3-1 Filter, Air
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***8D | Washer, M10 | 8 |
U4-4-1 Cooler Assembly
| 13***5D | Screw, M12 X 20mm Long | 8 |
| 13***9D | Screw, M12x35mm Long | 8 |
| 14***9D | Washer, M12 | 16 |
U4-2-1 Thermostat & Housing
| 02***13 | Screw | 3 |
| 02***37 | Connector, Water Outlet | 1 |
| 02***64 | Seal, Thermostat | 1 |
U4-6-1 Cooler,Air Charge, Hose And Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U4-5-2 Radiator & Hoses
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
U4-5-1 Radiator & Hoses
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***7D | Setscrew, M8x25 | 5 |
U4-3-2 Radiator/Fan, Fittings & Mountings, Fig 2
| 13***5D | Setscrew, M6 X 20mm Long | 6 |
| 13***5D | Setscrew, M8x20 | 6 |
| 13***5D | Setscrew, M10 X 20 | 4 |
U4-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***32 | Screw | 2 |
| 02***73 | Pump, Kit-Water | 1 |
U4-4-3 Cooler Assembly, Wide Core
| 13***5D | Setscrew, M8x20 | 10 |
| 13***7D | Setscrew, M8x25 | 10 |
| 14***7D | Washer, M8 Plain | 20 |
U4-2-2 Connector, Water Inlet
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***98 | Seal, Rectangular Ring | 1 |
| 02***31 | Screw, Flange Head Cap, M10 X 1.50 X 70 | 3 |
U4-3-3 Cooler,Installation
| 12***02 | Plate, Compression | 2 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***9D | Setscrew, M10 X 35mm Long | 8 |
U4-3-1 Cooler, Fittings & Mountings, Fig.1
| 12***02 | Plate, Compression | 2 |
| 13***7D | Setscrew, M8x25 | 8 |
| 13***9D | Setscrew, M10 X 35mm Long | 8 |
U4-6-2 Cooler,Air Charge, Hose And Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U4-4-2 Cooler Assembly, Epoxy Coated, Option
| 26***31 | G.A., Epoxy Coated Cool, Jcb 434s - P117 | 1 |
| 30***18 | Cooler, Combination, Epoxy Coated | 1 |
U5-3-1 Oil Filler
| 02***99 | O Ring | 1 |
| 02***09 | Tube, Oil Filler | 1 |
| 13***8D | Bolt, M8x30mm | 3 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 1 |
| 02***33 | Spring, Oil Relief Valve | 1 |
| 02***32 | Valve, Oil Pressure Relief | 1 |
U5-2-1 Pump, Oil
| 02***32 | Screw | 4 |
| 02***20 | Pump, Lubricating Oil | 1 |
| 02***11 | Pump, Oil | 1 |
U5-1-1 Sump, Oil, & Fittings
| 02***95 | Plug | 2 |
| 02***74 | Screw, M8 X 45 | 18 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
U5-3-2 Engine, Oil Filler
| 02***99 | O Ring | 1 |
| 02***09 | Tube, Oil Filler | 1 |
| 13***8D | Bolt, M8x30mm | 2 |
U6-5-1 Injectors, Fuel
| 02***08 | Screw | 12 |
| 02***31 | Connector | 6 |
| 02***32 | O Ring | 1 |
U6-1-1 Pump, Fuel Injection
| 02***17 | Nut | 3 |
| 02***81 | Nut | 1 |
| 02***82 | Washer, Spring | 1 |
U6-7-1 Filter, Fuel
| 02***96 | Plug | 2 |
| 02***11 | Screw, Flange Head, M8 X 60mm | 2 |
| 02***22 | Screw, Flange Head, M10 X 25 | 2 |
U6-2-1 Fuel Manifold, & Injection Pipes
| 02***80 | Screw, M8 X 50 | 4 |
| 02***36 | Retainer, Fuel Pipe Connector | 6 |
| 02***34 | Valve, Pressure Relief | 1 |
U6-4-1 Fuel Pipe, & Leak Off Pipe
| 02***19 | Plug, Expansion, D=9.8mm | 1 |
| 02***14 | Washer, Sealing | 1 |
| 02***07 | Bolt, M8x1.25x25 | 1 |
U6-6-2 Filter, Fuel Sedimenter
| 02***05 | Plug | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
| 32***22 | Adapter, Fuel Filter | 1 |
U6-6-1 Filter, Fuel Sedimenter
| 02***05 | Plug | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
| 32***20 | Filter, Fuel Assembly, M12 Ports | 1 |
U6-3-1 Fuel Filter Pipework
| 02***88 | Tube, Fuel Supply | 1 |
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 02***84 | Dowel, Ring | 2 |
| 13***0D | Bolt, M6x100mm | 3 |
| 71***50 | Compressor, Aircon | 1 |
U7-5-2 Compressor, & Installation, Air Conditioning
| 13***0D | Bolt, M6x100mm | 3 |
| 14***7D | Washer, M8 Plain | 3 |
| 26***24 | G.A, Air-Con M/C, Jcb 434s - P117 | 1 |
U7-1-1 Turbocharger
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
| 02***46 | O Ring | 1 |
U7-2-1 Turbocharger, Pipework
| 02***47 | Adapter | 2 |
| 02***99 | O Ring | 1 |
| 02***32 | Screw | 2 |
434S serial number reference
The machine identification plate is mounted on the left-hand side of the machine. The serial number is stamped on this plate along with major unit serials. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 1244000 - 1244499 | Applicable to JCB 434S Wheel Loader. Sourced from cylinder seal kit compatibility lists for bucket tilt, lift, steering, and quick hitch cylinders. | Confirmed by service manual for JCB 434S (from machine 1244000) and parts compatibility data. |
| 2460001 - 2460200 | Applicable to JCB 434S Wheel Loader. Sourced from cylinder seal kit compatibility lists for bucket tilt, lift, steering, and quick hitch cylinders. | Confirmed by parts compatibility data. |
| 2560601 - 2560800 | Applicable to JCB 434S Wheel Loader. Sourced from cylinder seal kit compatibility lists for bucket tilt, lift, steering, and quick hitch cylinders. | Confirmed by parts compatibility data. |
Frequently asked questions
What engine does the JCB 434S use?
Cummins QSB 6.7-litre turbocharged diesel engine producing 230 hp (171 kW).
What is the operating weight of the JCB 434S?
Approximately 13.1 to 13.4 tonnes (varies by configuration).
What model replaced the JCB 434S?
The JCB 435S succeeded the 434S in the agricultural wheel loader lineup.
What 434S owners discuss
What engine powers the JCB 434S and what are its key performance characteristics?
The JCB 434S uses a Cummins QSB 6.7-litre engine producing 230 hp (171 kW). It features a built-in turbocharger for increased performance at low engine speeds and is designed to deliver constant torque throughout the full loader arm rotation for excellent attachment control.
How does the transmission and driveline behave in the 434S?
The machine utilizes a 6-speed powershift transmission with closer gear ratios to improve acceleration and hill climbing. It includes an electrically operated selector and gear change with a speed inhibitor. The driveline is engineered to work in harmony with the axles and hydraulics for ultra-efficient operation.
What are the typical undercarriage and tire wear patterns for this model?
The 434S is a wheeled loader typically fitted with OEM part reference Michelin Megaxbib tyres. Operators should monitor tire wear closely as ground pressure and load capacity are directly tied to this specific tire size and configuration. The machine operates with a power-to-weight ratio of 16.8 hp per tonne.
Are there known electrical or sensor issues with the 434S?
The machine features an LCD display in the center of the dash to monitor machine health and prevent damage. The joystick includes integrated proportionality auxiliary controls. Operators should verify the functionality of these sensors and displays, as they are critical for preventing hydraulic and engine damage during operation.
What specific serial number ranges apply to the JCB 434S service manual?
The service manual for the JCB 434S applies to machines from serial number the OEM part reference onwards. The identification plate is mounted on the left-hand side of the machine and contains the serial numbers for the machine and its major units.
What fluid specifications are recommended for the JCB 434S?
JCB recommends using JCB branded fluids verified for performance and protection. The engine oil specification is JCB 15W/40 Multigrade for temperatures between -10°C to 50°C (14°F to 122°F). The hydraulic system requires JCB Super Universal Agricultural fluid for temperatures between -15°C to 30°C (5°F to 86°F). Coolant must be changed at recommended intervals to prevent silicate separation.
What should be checked when buying a used JCB 434S?
Verify the machine serial number against the OEM part reference+ range to ensure correct manual applicability. Check the condition of the OEM part reference tires for wear. Inspect the LCD display and joystick controls for proper function. Verify the engine oil and hydraulic fluid levels and condition, looking for signs of silicate separation in the coolant expansion bottle. Ensure the 6-speed powershift transmission shifts smoothly without slipping.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 434S. Related factory variants of the same model family:
434S
Need a specific 434S part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.