JCBagriculturalwheeled loaders
Jcb 412S LE
Maintenance schedule, common problems & OEM parts breakdown
The JCB 412S is a wheeled loading shovel manufactured from 2003 to 2010. It operates in the mid-size wheel loader class with an operating weight of approximately 8.182 tons (8,182 kg). The machine is powered by a JCB 2257 four-cylinder turbocharged engine producing 147.6 hp (110 kW) net power. Configurations include a standard ROPS cabin, a 1.31 yd³ (1 m³) heaped bucket, and smooth shift powershift transmission. It succeeded earlier JCB wheeled loader models and was followed by the 414S and 416S variants.
The 412S transitioned to a smooth shift transmission starting at machine serial number the OEM part reference. Later units from serial number the OEM part reference incorporated the JCB 444 Series engine. The machine remains relevant in the used market due to its durable Dieselmax/EcoMAX engine architecture which allows for extended 500-hour oil intervals. Its compact dimensions and versatile loader backhoe capabilities make it a staple for municipal and agricultural applications.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 412S LE specifications
Engine
| Model | JCB 444 |
| Gross Power | 162.3 hp (121 kW) |
| Net Power | 147.6 hp (110 kW) |
| Displacement | 268.6 cu in (4.4 L) |
| Cylinders | 4 |
| Emissions Tier | Tier III / Stage IIIA |
Weights
| Operating Weight | 18,038 lb (8,182 kg) |
| Static Tipping Weight | 8,755 lb (3,971 kg) |
Dimensions
| Transport Length | 20.15 ft (6,140 mm) |
| Transport Width | 7.46 ft (2,272 mm) |
| Transport Height | 9.29 ft (2,829 mm) |
| Wheelbase | 8.86 ft (2,700 mm) |
| Ground Clearance | 1.32 ft (400 mm) |
Performance
| Max Speed Forward | 22.5 mph (36.2 km/h) |
| Max Speed Reverse | 16 mph (25.6 km/h) |
| Breakout Force | 12,971 lb (57.7 kN) |
| Bucket Capacity Heaped | 1.31 cu yd (1 m³) |
| Bucket Capacity Struck | 1.1 cu yd (0.84 m³) |
Service capacities (summary)
| Fuel Tank | 33.1 gal (125 L) |
| Hydraulic System | 29.1 gal (110 L) |
| Engine Oil | 2.9 gal (10.7 L) |
| Cooling System | 5.7 gal (21.5 L) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
412S LE fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 10.7 L (2.9 US gal) | JCB 15W/40 Multigrade engine oil; viscosity range -10°C to 50°C (14°F to 122°F) |
| Cooling system | 21.5 L (5.7 US gal) | JCB OAT Coolant |
| Fuel tank | 125 L (33.1 US gal) | Diesel Oil |
| Transmission | 24 L (6.4 US gal) | JCB Super Universal Agricultural transmission oil |
| Front axle/differential | 25 L (6.7 US gal) | JCB gear oil |
| Rear axle/differential | 25 L (6.7 US gal) | JCB gear oil |
| Hydraulic system and tank | 110 L (29.1 US gal) | JCB hydraulic oil |
| Grease | N/A | JCB grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 412S LE maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 412S LE beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid analysis at the 500-hour interval is critical for the 412S. Sample engine oil, hydraulic fluid, and axle oil to detect early bearing wear or contamination. The JCB 2257 engine relies on clean fuel; inspect the primary and secondary fuel filters regularly to protect common-rail injectors. Monitor the hydraulic return filter magnet for metallic debris. Use JCB 15W-40 Multigrade engine oil and JCB-spec hydraulic fluid to maintain system efficiency and component life.
Corrective & Common Repairs
Address belt tension on the alternator, A/C, and fan drives during weekly checks to prevent premature wear. Inspect the smooth shift powershift transmission for fluid leaks and filter clogging. Check the JCB 2257 engine turbocharger shaft play and charge cooler boot condition. Verify the integrity of the hydraulic cylinder rods and kingpost fittings for pinhole seepage. Replace worn GET teeth and bucket pins to maintain breakout force and operational safety.
Overhaul & Rebuild Points
The 2000-hour service mandates a full hydraulic oil change and tank cleaning. Measure swing ring play on compatible excavator variants using dial indicators. Inspect the chassis, side frames, and loader arm for structural cracks or unauthorized welding. Service the immersed brakes and check disc wear. Test the injector spray patterns via the JCB ServiceMaster diagnostic tool and replace as required to ensure optimal combustion and emissions compliance.
Seasonal & Environment Servicing
In cold climates, verify the coolant mixture provides freeze protection down to -36°C (-33°F). Use JCB Super Universal Agricultural oil for temperatures between -15°C and 30°C. In dusty environments, clean the air filter housing frequently and replace the element per restriction indicators. Inspect the undercarriage and tires for damage from debris. Ensure the cab HVAC system is serviced to maintain operator comfort and prevent condensation issues in the electrical components.
412S LE common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 817/03978 | Label, Fuel Filter, 100 Hr | Fuel system service | Check fitment → |
| 02/201138 | Pipe, Assembly, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
| 581/07100 | Filter, Hydraulic | Scheduled service item | Check fitment → |
| 30/925323 | Filter, Recirculation | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
412S LE fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel Rail Pressure Too Low | Clogged fuel filters, failing lift pump, or restricted fuel line. | Check fuel filter condition and fuel supply pressure. |
| P0117 | Engine Coolant Temperature Sensor Circuit Low Voltage | Faulty coolant temperature sensor, shorted wiring, or low coolant level. | Inspect sensor wiring harness and connector for damage; check coolant level. |
| P0521 | Engine Oil Pressure Sensor Range/Performance Issue | Faulty oil pressure sensor or erratic signal from the sensor. | Verify oil pressure with a mechanical gauge; inspect sensor wiring. |
| P2047 | Reductant Injector Circuit Open (SCR System) | Open circuit in the DEF/AdBlue injector wiring or connector. | Inspect the reductant injector harness and connector for corrosion or damage. |
| U0100 | Lost Communication with Engine Control Module | Damaged CAN bus wiring, poor ground connection, or low battery voltage. | Check battery voltage and ground straps; inspect CAN bus wiring for damage. |
| P0335 | Crankshaft Position Sensor 'A' Circuit (No Signal) | Failed crank sensor, damaged wiring, or faulty reluctor ring. | Inspect crank sensor wiring and connector; check sensor resistance. |
| P0102 | Mass Air Flow (MAF) Sensor Low Voltage Fault | Dirty or faulty MAF sensor, or intake air leak. | Clean the MAF sensor; inspect intake ducting for leaks. |
| P0321 | CAN Bus Message Error for Engine Speed | Intermittent CAN bus communication fault or sensor signal loss. | Check CAN bus wiring integrity and connector pins. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
412S LE attachments & work tools
Standard Shovel Bucket
The base configuration includes a standard shovel bucket with a struck capacity of 0.84 m³ (1.1 yd³) and a heaped capacity of 1 m³ (1.4 yd³). The bucket width is 2286 mm (7.5 ft), and the machine provides a breakout force of 57.7 kN (12971.5 lb).
Loader Forks
The machine is equipped with a fork tine assembly with a tine length of 1220 mm (4.01 ft). The static tipping load for forks is rated at 3344 kg (7372.3 lb), which is lower than the bucket tipping load of 3971 kg (8754.6 lb).
Quick Hitch Systems
Factory options include both mechanical and hydraulic quick hitch configurations. The service manual for the 412S, 414S, and 416S series includes a dedicated section on attachments, indicating the structural provision for tool interchangeability.
Hydraulic System Configuration
The machine utilizes a dual gear type pump with a total flow capacity of 390 l/min (103.1 gal/min). The hydraulic system relief valve is set to 21994.3 kPa (3190 psi), and the total system fluid capacity is 110 l (29.1 gal).
Engine and Power
The 412S is powered by a JCB 444 Series engine with a displacement of 4.4 l (271 cu in). Gross power is 90.5 kW (121.4 hp) at 2200 rpm, with a maximum torque of 434 Nm (320.2 lb ft) at 1400 rpm. Turbocharging is the standard aspiration method.
Transmission and Drive
The machine features a smooth shift powershift transmission with six forward gears and three reverse gears. Maximum forward speed is 37.8 km/h (23.5 mph), and maximum reverse speed is 26.7 km/h (16.6 mph).
Serial Number and Model Identification
The Vehicle Identification Number (VIN) format for the 412S begins with 'SLP 412S0'. Smoothshift transmission was introduced for the 412S Wheeled Loading Shovel starting from machine serial number the OEM part reference. The JCB 444 Series engine was added to the 412S from machine serial number the OEM part reference.
All 412S LE assemblies by section
Every catalogued assembly group for the Jcb 412S LE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-25-1 Shovel, 1.2cu.M., 2286mm (7'6") Wide
| 54***00 | Shovel, 1.2 Cu.M. | 1 |
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
A1-5-1 Shovel, 1.3cu.M., Quickhitch
| 51***09 | Toeplate, 2400 mm Wide, 15 Holes | 1 |
| 51***00 | Shovel, 1.4 Cu.M, 2400 mm Wide | 1 |
| 51***00 | Shovel, 1.4 Cu. M | 1 |
A1-26-1 Shovel G.P, 1.3cu.Yd. & 1.2cu.M., Agricultural, Quickhitch
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
| 54***00 | Shovel, 1.2 Cu.M. | 1 |
A1-3-1 Shovel, 1.1cu.M.
| 51***09 | Toeplate, 2250 mm Wide, 13 Holes | 1 |
| 51***00 | Shovel, 1.2 Cu.M., 2250 mm Wide | 1 |
| 51***00 | Shovel, 1.2 Cu.M. | 1 |
A1-1-1 Shovel, 1.3cu.M.
| 51***00 | Shovel, 1.3 Cu. M., 2400mm Wide | 1 |
| 51***09 | Toeplate, 2400 mm Wide, 15 Holes | 1 |
| 51***00 | Shovel, 1.4 Cu.M/1.8 Cu.Yrd. | 1 |
A1-11-1 Toeplate, Bolt-On, 2400mm Wide
| 13***3Z | Nut, M20 | 15 |
| 51***00 | G.A. | 1 |
| 51***01 | Toeplate, Inner | 1 |
A1-24-1 Shovels
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
| 54***00 | Shovel, 1.0 M3 | 1 |
A1-23-1 Shovel, 1.0 Cu.M.
| 54***01 | Toeplate, 2286mm Wide, With Holes | 1 |
| 54***00 | Shovel, 1.0cu.M | 1 |
A1-10-1 Toeplate, Bolt-On, 2250mm Wide
| 13***3Z | Nut, M20 | 13 |
| 51***00 | G.A. | 1 |
| 51***01 | Toeplate, Inner, 1350mm Wide 7 Holes | 1 |
A1-4-1 Shovel, 1.1cu.M., Quickhitch
| 51***09 | Toeplate, 2250 mm Wide, 13 Holes | 1 |
| 51***00 | Shovel, 1.1cu M Quickhitch, 2250mm Wide | 1 |
| 51***00 | Shovel, 1.2 Cu.M/1.6cu.Yrd. | 1 |
A2-2-1 Tow Hitch, Installation, 12 Volt
| 12***97 | Box, Rocker Switch | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
A2-1-4 Couplings, Quick Release
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 26***17 | G.A. | 1 |
| 45***00 | Coupling, 1/2" Bsp Female, Quick Release | 1 |
A2-1-3 Tow Hitch Components
| 14***6Z | Washer, M6 | 2 |
| 26***01 | Hitch, Inner Tube | 1 |
| 26***05 | Handle, Toggle | 2 |
A2-1-5 Quickhitch
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 14***11 | Seal, Bonded | 2 |
A2-1-6 Quickhitch
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 14***11 | Seal, Bonded | 2 |
A2-1-1 Quickhitch
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 14***11 | Seal, Bonded | 2 |
A2-2-2 Tow Hitch, Installation, 24 Volt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***2Z | Bolt, M24x50 | 4 |
A2-1-2 Quickhitch
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 14***11 | Seal, Bonded | 2 |
A3-1-2 Fork Retention Kits, Industrial Forks
| 54***01 | Pin, Location | 2 |
| 81***45 | Spring | 2 |
| 82***98 | Pin | 2 |
A3-6-1 Fork,Manure,, Silage,With Top Grab, 2.29m Wide X 1.9cu.M
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-15-1 Wrapped, Bale Clamp
| 13***6Z | Bolt, M20 X 70 | 1 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
| 13***3Z | Nut, M20 | 3 |
A3-20-1 Bucket,Grain,, Potatoe,, 2.5 Cu.M
| 98***17 | Bucket, Grain/Potato, 2290mm X 2.5cu.M. | 1 |
A3-1-1 Fork Frame And Tines
| 14***4Z | Washer | 2 |
| 21***10 | Pin, Split | 2 |
| 51***02 | Fork | 2 |
A3-3-1 Bucket,Grain,, Potatoe,, 50 X 70 Cub.Ft 7'6"Wide
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 1.5cu.M | 1 |
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 2.1cu.M | 1 |
A3-27-1 Box Tipper
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***04 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-11-1 Fork,, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 81***68 | Plate, Rating | 1 |
A3-26-1 Log Grab, Sliding Fork
| 54***09 | Hose | 2 |
| 54***10 | Hose | 2 |
| 54***02 | Frame | 1 |
A3-14-1 Flat 8 Bale Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-7-1 Fork,Manure/Silage,, With Push Off & Grab
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-28-1 Bracket, Conversion
| 98***42 | Bracket, Conversion | 1 |
A3-25-1 Log Grab, Fixed Fork
| 54***01 | Frame | 1 |
| 54***03 | Grab, Arm | 2 |
| 54***04 | Pin, Pivot | 2 |
A3-8-1 Fork,Manure/Silage,, High Capacity
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-5-1 Fork,, Manure,Silage,, 2.29m Wide X 1.9cu.M
| 54***01 | Frame | 1 |
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
A3-17-1 Bucket, Root Crop
| 98***00 | Shovel, Root Crop, 2290mm Wide 105 Cu.M | 1 |
| 98***00 | Bucket, Root Crop, 2290mm Wide 2.1 Cu.M | 1 |
A3-2-2 Fork And Frame, Class 3, Standard Lift
| 14***4Z | Washer | 2 |
| 21***10 | Pin, Split | 2 |
| 51***03 | Pin, Spring | 2 |
A3-12-1 Fork., Round Bale,, With Push Off
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter; Not Illustrated, Fitted To Solenoid Valve. Not Illustrated, Fitted To Solenoid Valve And Item 32., Adapter | 2 |
| 45***00 | Coupling, Female, 3/8" Bsp; Replaced By 45/91***00, See San04893 | 2 |
A3-2-1 Bucket Grain/Potatoe, 2290mm Wide
| 98***00 | Shovel, Grain/Potato, 2290mm Wide, 1.7cu.M | 1 |
| 98***01 | Toeplate, Weld On | 1 |
A3-24-1 Fork, Muck, C/W Top Grab
| 33***03 | Grab Box | 2 |
| 33***04 | Grab, Outer Claw | 1 |
| 33***09 | Grab, Inner Claw | 1 |
A3-19-1 Bale Grab, Hesston
| 98***01 | Frame, Sliding | 1 |
| 98***02 | Fork, Tine | 1 |
| 98***03 | Fork, Spike | 1 |
A3-23-1 Fork, Muck/Silage
| 54***02 | Boss | 9 |
| 54***03 | Fork | 9 |
| 54***04 | Nut | 9 |
A3-4-1 Bucket, Slurry Rehandling, 7'-6"Wide X 50cu/Ft
| 54***01 | Plate, Toe | 1 |
| 98***00 | Shovel, Slurry/Rehandling, 2290mm Wide, 1.5cu.M | 1 |
A3-22-1 Bucket, Heavy Duty
| 98***28 | Bucket, Heavy Duty | 1 |
| 99***00 | Kit, Tooth C/W Fixings | 1 |
| 99***00 | Toeplate, Bolt On | 1 |
A3-21-1 Bucket, Multi
| 98***26 | Bucket, Multi | 1 |
A3-13-1 Grab, Bale
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 1 |
| 54***07 | Kit-Seal | 1 |
| 98***00 | Grab, Bale | 1 |
A3-29-1 Blade, Scraper, 7'6" (2.29m) Wide
| 54***01 | Plate, Toe | 1 |
| 54***00 | Blade, Scraper, 7'-6"(2.29m) Wide | 1 |
A3-18-1 Carriage, Fork, Industrial
| 54***00 | Frame, 1370mm | 1 |
| 54***00 | Frame, 1980mm | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-9-1 Silashear
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-16-1 Blade,, Grain Pusher
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 10ft Reach; Nsp Ref A.Little, Resurrected By K Colclough San 03763 | 1 |
| 54***00 | Blade, Grain Pusher, 7'-0"Wide 7ft Reach; Nsp Ref A.Little | 1 |
A3-10-1 Fork,, Round Bale,, 2 Bale Capacity
| 54***01 | Fork, Tine | 4 |
| 98***00 | Fork, Round Bale, 1820mm Wide | 1 |
B Bodywork, Cab, Loader End
B1-19-1 Counterweight, With Tow Hitch
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
B1-11-3 Fenders, Rear
| 13***5Z | Bolt | 6 |
| 13***8Z | Bolt, M10 X 30 | 24 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
B1-15-2 Condenser, Installation
| 13***0Z | Bolt, M6 X 40mm Long | 6 |
| 13***7Z | Bolt, M10x25 | 6 |
| 13***4Z | Bolt | 1 |
B1-15-4 Air Intake Screen
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***6Z | Washer, M6 | 4 |
B1-15-9 Condenser, Installation
| 13***0Z | Bolt, M6 X 40mm Long | 6 |
| 13***7Z | Bolt, M10x25 | 6 |
| 13***4Z | Bolt | 1 |
B1-17-1 Soundproofing, 'Q' Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 26***55 | Panel, Soundproofing, Seat Box Upper | 1 |
B1-5-1 Centre Pivot
| 13***5Z | Bolt, M5 X 20mm Long | 1 |
| 13***8Z | Screw | 1 |
| 13***2Z | Bolt, M12 X 50mm | 6 |
B1-14-3 Step/Toolbox
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***1Z | Bolt, M12 X 45mm | 8 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-7-1 Engine Cover
| 12***01 | Stop, Bump | 2 |
| 13***5Z | Bolt | 8 |
| 13***8Z | Screw, M8x30 | 2 |
B1-11-4 Fenders, Rear
| 13***5Z | Bolt | 6 |
| 13***8Z | Bolt, M10 X 30 | 24 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
B1-16-1 Guard, Belly, Optional
| 13***7Z | Bolt, M10x25 | 10 |
| 13***0Z | Bolt, M12x40 | 2 |
| 13***2Z | Bolt, M16 X 50mm | 4 |
B1-6-1 Bodywork Standard
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 34 |
| 13***2Z | Bolt, M12 X 50mm | 10 |
B1-15-3 Condenser, Installation
| 13***0Z | Bolt, M6 X 40mm Long | 6 |
| 13***4Z | Bolt | 1 |
| 13***1Z | Nut, M5-8 | 1 |
B1-18-1 Chassis Rear
| 12***55 | Cap, Hydraulic Filler, Non Lockable; Replaced By Mss Use The Following Parts 123/0, 4930 + 70***01 Key. See San05966 | 1 |
| 12***56 | Seal, Cap | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 20 |
B1-11-2 Fenders, Front & Rear
| 13***5Z | Bolt | 6 |
| 13***7Z | Bolt, M10x25 | 16 |
| 13***8Z | Bolt, M10 X 30 | 24 |
B1-9-1 Fuel Sender
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 6 |
| 26***74 | G.A. | 1 |
| 71***00 | Sender, Fuel | 1 |
B1-15-1 Air Intake Screen
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B1-10-1 Rear Grille
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
| 13***9Z | Screw, M10x35mm | 4 |
B1-19-2 Counterweight, Optional
| 13***6Z | Bolt | 4 |
| 14***4Z | Washer | 4 |
| 26***65 | Counterweight, Rear Chassis, 331kg | 1 |
B1-21-1 Breather, Hydraulic Tank
| 13***3Z | Nut | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 14***6Z | Washer | 1 |
B1-20-1 Auxiliary Fuel Tank
| 12***91 | Washer, Nylon | 6 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 14 |
| 13***0Z | Nut, Back, 1-1/2" Bsp | 1 |
B1-7-2 Engine Cover
| 12***01 | Stop, Bump | 2 |
| 13***5Z | Bolt | 8 |
| 13***8Z | Screw, M8x30 | 2 |
B1-1-2 Chassis Front
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***8Z | Screw | 2 |
B2-1-2 Door Restraints
| 12***34 | Strut, Door Stay; Replaced By 33***73, See San 10864 | 1 |
| 13***2Z | Nut, Lock | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
B2-14-1 Fire Extinguisher
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
B2-8-3 Seat, Suspension
| 12***00 | Turntable | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
B2-7-1 Visor, Sun
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***87 | Blind, Roller, Scissor Type | 1 |
B2-4-13 Cab Glazing, Tinted, Sliding Window
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***24 | G.A. | 1 |
B2-5-1 Tool Kit
| 40***17 | Grease, Hp, 400g X 24 | 1 |
| 82***28 | Tool, Wrench Wheel Nut, 28.83-28.57mm A/F | 1 |
| 91***00 | Gauge, Tyre Pressure | 1 |
B2-1-3 Cab
| 12***47 | Handle, C/W Barrel Lock Only | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Capscrew, M6 X 10mm X 12.9 | 2 |
B2-4-10 Cab Glazing, Clear Glass, Fixed Door
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***21 | G.A. | 1 |
B2-10-1 Roof, Safari
| 13***1Z | Bolt, M10 X 45mm | 4 |
| 13***2Z | Nut, Lock | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
B2-9-1 Cab Components
| 12***96 | Hook, Coat | 1 |
| 12***78 | Mirror, Interior | 1 |
| 12***79 | Strap, Coat Tidy | 1 |
B2-7-2 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 26***02 | G.A. | 1 |
| 82***23 | Screw, Spire | 1 |
B2-8-1 Seat, Suspension
| 13***08 | Bolt | 4 |
| 26***60 | G.A. | 1 |
| 40***00 | Armrest, Kit | 1 |
B2-4-9 Cab Glazing, Clear Glass, Sliding Window
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***23 | G.A. | 1 |
B2-1-1 Cab
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
| 12***47 | Handle, C/W Barrel Lock Only | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B2-6-1 Direct Glazing, Replacement Material
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
| 41***03 | Cleaner, Primer Sika 205, 250ml | 0 |
B2-2-1 Heat Baffles, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***5Z | Bolt | 6 |
| 14***1Z | Washer | 6 |
B2-8-2 Suspension Seat, Components, Kab/Bostrom
| 40***03 | Kit-Seat Foam | 1 |
| 40***02 | Frame, L.H. | 1 |
| 40***05 | Kit, Back Foam | 1 |
B2-16-1 Cab Cover
| 99***00 | Cover, Cab | 1 |
B2-4-14 Cab Glazing, Tinted, Fixed Door
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***22 | G.A. | 1 |
B2-2-2 Rubber Baffle, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Bolt | 13 |
B2-12-1 Cover, Heater
| 12***67 | Wire, Rope | 1 |
| 12***86 | Catch, Vandal Cover | 1 |
| 13***1Z | Nut | 1 |
B2-3-1 Soundproofing & Trim, Standard Cab
| 12***31 | Vent, Air Register | 6 |
| 14***02 | Screw | 4 |
| 24***13 | Grommet, 31.8 Panel Hole X 3.5 Thk | 2 |
B2-12-2 Cover, Heater
| 12***86 | Catch, Vandal Cover | 1 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 3 |
| 26***64 | Hinge; N.L.A. Bonded Into Door | 1 |
B2-13-1 Roof Trims, Cab
| 26***94 | Panel, L.H., Roof | 1 |
| 26***95 | Panel, R.H., Roof | 1 |
| 26***11 | Panel, Centre, Roof | 1 |
B2-4-2 Cab Glazing, Tinted, Sliding Window
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***57 | G.A. | 1 |
B2-4-1 Cab Glazing, Tinted, Fixed Door
| 26***78 | Hammer, Emergency, Glass Breaker; Supercedes 69***88, San 12499 | 1 |
| 26***79 | Holder, Hammer | 1 |
| 26***56 | G.A. | 1 |
B3-7-1 Arms, Loader, & Linkage
| 13***8Z | Screw | 10 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 13***2Z | Bolt, M12 X 120 | 3 |
B3-7-2 Arms, Loader, & Linkage
| 13***8Z | Screw | 14 |
| 13***0Z | Bolt, M16 X 40mm | 4 |
| 13***2Z | Bolt, M12 X 120 | 3 |
B3-6-1 Safety Strut
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 12***35 | Mounting, Strut | 2 |
B5-2-1 Paint
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
| 42***01 | Thinners, 1 Litre, 2-Pack | 0 |
B5-1-1 Transfers
| 26***52 | G.A. | 1 |
| 70***52 | Decal, Heater Fan Blower | 1 |
| 81***73 | Label, Caution | 4 |
C Electrics-Machine, Cab & Engine
C1-12-10 Air Conditioning, Installation 24v
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-3-3 Battery & Fittings, 12 Volt
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut | 4 |
C1-24-3 Full Auto Shift Kit
| 04***02 | Switch, Idle | 1 |
| 04***00 | Kit, Full Auto Shift | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
C1-7-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-1-1 Harness, Machine Electric, 12 Volt
| 14***02 | Screw | 4 |
| 24***14 | Grommet | 1 |
| 26***48 | G.A. | 1 |
C1-12-4 Condenser, Installation
| 13***0Z | Bolt, M6 X 40mm Long | 6 |
| 13***7Z | Bolt, M10x25 | 6 |
| 13***4Z | Bolt | 1 |
C1-13-1 Work Lights, Rear, 12 Volt
| 26***10 | G.A. | 1 |
| 70***00 | Light, Work, Rh Rear | 1 |
| 70***00 | Light, Work, Lh Rear | 1 |
C1-10-1 Light, Number Plate, 12 Volt
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***74 | Mounting, No.Plate Light | 1 |
C1-23-1 Flasher, Side Repeater, 12 Volt
| 13***1Z | Nut, 4ba Plain | 4 |
| 14***9Z | Washer | 4 |
| 26***13 | G.A. | 1 |
C1-20-1 Light Combination, Rear 12volt
| 12***02 | Plate, Compression | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***6Z | Bolt, M10 X 160 Long | 2 |
C1-12-27 Heater Installation, Componentry
| 13***5Z | Bolt | 9 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***1Z | Washer | 7 |
C1-21-2 Light, Head, 24.Volt
| 26***00 | Headlight R.H. Dip, 24 Volt Clear | 1 |
| 26***00 | Headlight L.H. Dip, 24 Volt Clear; Mss To 33***88 +72***08 + 72***17 + 72***43, San101083 D.Jackson ( Request From Andy Weir ) | 1 |
| 70***01 | Lens | 1 |
C1-14-3 Instrument Panel, Roof Mounted
| 26***50 | Panel, Instrumentation, Roof | 1 |
| 26***48 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C1-12-1 Air Conditioning, Installation 12v
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
C1-1-10 Electrics, Trailer, 24 Volt
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
C1-12-3 Air Conditioning, Installation 12v
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 26***78 | Valve, Expansion | 1 |
| 26***74 | Unit, Heating/, Air Conditioning,Cab | 1 |
C1-14-4 Instrument Panel, Roof Mounted, 24 Volt
| 26***50 | Panel, Instrumentation, Roof | 1 |
| 70***00 | Light, Interior | 1 |
| 70***03 | Cover, Roadlamps, Switch Decal | 1 |
C1-2-3 Fuses And Relays, 24 Volt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 3 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
C1-17-2 Light, Beacon, Hazard Warning, Optional - 24 Volt
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***55 | Bracket, Folding | 1 |
C1-25-1 Radio Installation
| 26***84 | Plate, Clamping | 2 |
| 26***20 | G.A. | 1 |
| 71***00 | Aerial | 1 |
C1-10-2 Light, Number Plate, 24 Volt
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***74 | Mounting, No.Plate Light | 1 |
C1-1-2 Harness, Machine Electrics, 24 Volt
| 14***02 | Screw | 4 |
| 26***94 | G.A. | 1 |
| 72***97 | Harness, Rear Grille | 1 |
C1-12-29 Recirculation Filter
| 26***89 | Plate, Clamp | 1 |
| 26***11 | G.A. | 1 |
| 30***23 | Filter, Recirculation | 1 |
C1-1-11 Electrics, Trailer, 12 Volt
| 13***5Z | Bolt, M5 X 20mm Long | 6 |
| 13***3Z | Nut | 9 |
| 13***9Z | Capscrew | 3 |
C1-12-20 Air Conditioning, Common Parts
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***4Z | Bolt | 1 |
C1-12-30 Recirculation Filter
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 26***11 | G.A. | 1 |
| 30***23 | Filter, Recirculation | 1 |
C1-18-1 Alarm, Reverse
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C1-19-1 Ashtray & Lighter
| 14***02 | Screw | 4 |
| 26***90 | Ashtray | 1 |
| 26***88 | Bracket | 1 |
C1-12-28 Filter, Heater Air Inlet
| 14***2Z | Screw | 14 |
| 25***01 | Latch | 2 |
| 26***43 | Element, Paper | 1 |
C1-12-5 Heater, Installation
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***1Z | Washer, Plain | 4 |
| 14***6Z | Washer, M6 | 10 |
C1-12-22 Air Conditioning, Installation
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***6Z | Washer, M6 | 1 |
C1-3-4 Battery & Fittings, 24 Volt
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 6 |
C1-12-26 Heater Unit
| 25***03 | Valve, Water | 1 |
| 26***50 | Unit, Heater | 1 |
| 30***50 | Cover, Assembly, Heater/Air Con. | 1 |
C1-20-4 Rear Light, Components
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Reflector, Side Light | 1 |
| 70***03 | Lens, Brake Light | 1 |
C1-9-1 Cctv Installation, Clarion, Optional
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-13-2 Work Lights, Rear, 24 Volt
| 26***07 | G.A. | 1 |
| 70***00 | Light, Work | 1 |
| 70***00 | Light, Work | 1 |
C1-2-2 Fuses And Relays, 12 Volt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut | 3 |
C1-4-1 Electrics Cab
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-21-1 Light, Head, 12.Volt
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***01 | Harness | 1 |
C1-5-1 Switch, Column
| 04***01 | Switch, Column | 1 |
| 13***3Z | Capscrew | 2 |
| 26***48 | G.A. | 1 |
C1-12-12 Heater, Installation
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 26***07 | Unit, Heating Cab, 24 Volt | 1 |
| 71***00 | Blower, Heater, 24 Volt | 1 |
C1-14-2 Instrument Panel, Roof Mounted
| 26***50 | Panel, Instrumentation, Roof | 1 |
| 26***34 | G.A. | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
C1-9-2 Cctv Installation, 'Mitsubishi', Optional
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-26-1 Heaterless Machines
| 13***5Z | Bolt | 6 |
| 14***1Z | Washer, Plain | 4 |
| 14***6Z | Washer, M6 | 2 |
C1-12-6 Filter Kit
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
| 14***2Z | Screw | 14 |
| 24***11 | Grommet | 2 |
C1-22-1 Horn, Single Tone
| 13***3Z | Screw, M6x16 | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-24-2 Full Auto Shift Kit
| 04***73 | Valve, Assembly, Gearshift | 1 |
| 04***02 | Switch, Idle; Superseded To Nla On San101172 D.Jackson 16/10/09, Advised By Zf And No Alternative. | 1 |
| 04***00 | Kit, Full Auto. Shift; Mss To 33***38 + 04/80***02 + 04/80***73, D.Jackson 11/07/07 San23879 (Zf Instruction) | 1 |
C1-25-2 Radio Installation
| 26***84 | Plate, Clamping | 2 |
| 26***20 | G.A. | 1 |
| 71***00 | Aerial | 1 |
C1-12-11 Air Conditioning, Installation 24v
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 26***78 | Valve, Expansion | 1 |
| 26***04 | Kit, Cab Heating | 1 |
C1-27-1 In Cab Convertor, 24/12 Volt
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C1-2-1 Instrument Panel, 12 Volt
| 24***14 | Grommet | 1 |
| 70***00 | Light, Master, Warning 12v | 1 |
| 70***00 | Switch, Blank | 1 |
C1-4-2 Electrics Cab, 24 Volt
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-3-2 Battery & Fittings
| 13***5Z | Bolt, M5 X 20mm Long | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut | 3 |
C1-12-23 Air Con. Unit, Components
| 25***02 | Valve, Expansion | 1 |
| 25***03 | Valve, Water | 1 |
| 26***51 | Unit, Air Conditioning | 1 |
C1-22-2 Horn, Single Tone, 24 Volt
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C1-2-4 Instrument Panel, 24 Volt
| 24***14 | Grommet | 1 |
| 26***09 | G.A. | 1 |
| 26***48 | G.A. | 1 |
C1-16-2 Work Lights, Front, 24 Volt
| 26***08 | Bracket, L.H. | 2 |
| 26***09 | Bracket, R.H. | 2 |
| 26***31 | G.A. | 1 |
C1-18-2 Alarm, Reverse
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C1-23-2 Flasher, Side Repeater, 24 Volt
| 13***1Z | Nut, 4ba Plain | 4 |
| 14***9Z | Washer | 4 |
| 26***90 | G.A. | 1 |
C1-20-3 Light Combination, Rear 24volt
| 12***02 | Plate, Compression | 2 |
| 26***97 | Arm, Rear Light | 2 |
C1-20-2 Rear Light, Components, 12 Volt
| 70***00 | Light, Rear Combination, L.H. | 1 |
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Reflector, Side Light | 1 |
C1-17-1 Light, Beacon, Hazard Warning, Optional
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 26***55 | Bracket, Folding | 1 |
C1-16-1 Work Lights, Front
| 70***00 | Light, Front Working | 2 |
| 72***61 | Bulb, 12v-55w H3 | 2 |
C1-12-2 Air Conditioning, Installation 12v
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
C2-3-1 Alternator, 72amp
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***08 | Bracket, Drive End | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-4-4 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-3-2 Alternator, 85amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***01 | Stator, & Drive End Bracket | 1 |
C2-3-3 Alternator, Sealed, 35amp 12.Volt, Optional
| 71***00 | Alternator | 1 |
| 71***01 | Holder, & Brushes Assembly | 1 |
| 71***02 | Regulator | 1 |
C2-5-3 Motor, Starter, 24volt
| 71***00 | Motor, Starter 24.Volt | 1 |
| 71***05 | Stud | 2 |
| 71***08 | Washer, Spring | 2 |
C2-1-2 Electrical Equipment, Am Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-1-3 Electrical Equipment, 24volt, Am Build
| 17***04 | Solenoid, 24.Volt, Solenoid, 24.Volt; 24.Volt - May Be Used In Place Of 17/10***01. When Fitting To 02/11***00 - 12.Volt Engine Disconnect And Discard Esos Resistor., Solenoid, 24.Volt; 24.Volt - May Be Used In Place Of 17/10***01. When Fitting To Engine 01/11***00 With 12.Voltsolenoid, Disconnect & Discard Esos Resistor. | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-4-3 Alternator Mountings, 35amp 12.Volt Sealed
| 02***79 | Belt, Fan, Pair | 1 |
| 13***8Z | Bolt | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
C2-5-2 Motor, Starter, 24volt
| 71***00 | Motor, Starter 24.Volt | 1 |
| 71***01 | Armature | 1 |
| 71***02 | Bush | 1 |
C2-3-4 Alternator, Sealed, A127m-55amp 12.Volt, Optional
| 70***00 | Tape, Self-Amalgamating | 0 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***00 | Alternator, 12volt-55amp Sealed | 1 |
C2-2-1 Engine Heater, Installation, Ad Build
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
C2-3-5 Alternator, 24volt
| 71***02 | Capacitor, Suppression | 1 |
| 71***03 | Screw | 1 |
| 71***09 | Kit-Screw & Washer | 1 |
C2-1-1 Electrical Equipment, Ad Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Temperature | 1 |
C2-4-2 Alternator Mountings, 85amp, Optional
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
D Controls-Machine, Engine & Steering
D1-2-2 Brake, Parking, Control
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-6-1 Servo Valve, 3 Spool, 12 Volt
| 14***11 | Seal, Bonded | 8 |
| 16***02 | Adapter, 1/4" Bsp M/M | 8 |
| 25***00 | Valve, Loader Control, Servo | 1 |
D1-6-4 Servo Valve, Components, 3 Spool
| 25***04 | Coil, Assembly, 12 Volt | 3 |
| 25***01 | Coil, Assembly, 24 Volt; Superseded By 25/94***05 D.Jackson 06/08/08 On San26373 ( Request From Andrew Wier ) | 3 |
| 25***01 | Kit, Electric Detent, 24 Volt | 1 |
D1-10-1 Twin Auxiliary Lever
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***11 | Seal, Bonded | 2 |
D1-4-1 Control, Reset, Lift Arm
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 26***82 | Bracket, Switch | 1 |
| 26***86 | Handle, Locking | 1 |
D1-4-2 Control, Reset, Lift Arm
| 13***6Z | Bolt | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
D1-6-3 Servo Valve, 3 Spool, 24 Volt
| 14***11 | Seal, Bonded | 8 |
| 16***02 | Adapter | 8 |
| 25***00 | Valve, Loader Control, 24 Volt, Valve, Loader Control, 24 Volt; Deutsch Connectors. Also Supply 72***21 Harness | 1 |
D1-3-4 Control, Tilt Reset
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***1Z | Nut | 2 |
D1-3-1 Control, Tilt Reset
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***1Z | Nut | 2 |
D1-6-2 Servo Valve, 3 Spool, 24 Volt
| 14***11 | Seal, Bonded | 8 |
| 16***02 | Adapter | 8 |
| 25***00 | Valve, Loader Control, 24 Volt | 1 |
D2-2-1 Control Pedal, Throttle
| 13***3Z | Nut | 2 |
| 14***3Z | Washer, Spring | 2 |
| 25***00 | Clamp, Assembly | 1 |
D2-1-1 Control, Throttle
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
D2-1-2 Control, Throttle
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
E Hydraulics & Air Including, Steering
E1-2-1 Circuit, Loader End, Auxiliary
| 13***8Z | Bolt, M10x80 | 2 |
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-3-1 Circuit, Loader End, Parallel Lift
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
E1-8-1 Hose & Pipework, Hot Climate
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 26***85 | Cooler, Oil, Epoxy Coating | 1 |
E1-7-3 Charge Valve
| 15***00 | Valve, Charge; Superseded By 92***88 D.Jackson 07/03/07, San23427 (James Coleman Request At Parker) | 1 |
| 15***01 | Kit-Seal, Including Filter; See Memo.24/7/06.Nla.Only Parker Can Service, The Valve.P Gamble.Ref J Coleman Parker. | 1 |
| 16***02 | Adapter | 3 |
E1-15-1 Isolator Kit, 'Bridge Bashing'
| 12***00 | Strap | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
E1-20-1 Filter, Hydraulic
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 58***12 | Element, Filter, 10 Micron | 1 |
E1-10-1 Circuit, Servo Valve 3 Spool
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***5Z | Bolt | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-5-1 Filter, Hydraulic, Return Pipe
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
E1-1-1 Circuit, Loader End
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
E1-4-1 Circuit, Loader End, Auxiliary
| 13***8Z | Bolt, M10x80 | 2 |
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E2-1-2 Main Hydraulic Pump, Components
| 20***03 | Kit, Pressure Plates, (2 Off) | 2 |
| 20***01 | Kit-Seal, Pump | 1 |
| 33***52 | Key, Pump Shaft | 1 |
E2-4-2 Hose & Pipework, Main & Steering, Fixed Flow
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
E2-1-1 Pump, Main Hydraulic
| 13***8Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
E3-25-1 Aux. Service, Auxiliary Relief Val, Ves
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***02 | Valve, Auxiliary. Relief | 2 |
| 26***57 | Kit, Auxiliary. Relief Valve, 411-414 | 1 |
E3-5-6 Priority Steer Assy
| 25***27 | Screw | 4 |
| 25***05 | O Ring | 2 |
| 25***06 | Cap, End | 2 |
E3-1-1 Solenoid Valve, Tow Hitch, 12 Volt
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
E3-4-3 Valve Assembly, Components
| 25***11 | Cap | 2 |
| 25***13 | Spring | 2 |
| 25***14 | Seat | 2 |
E3-5-5 Aux. End Mechanism
| 25***06 | O Ring | 1 |
| 25***07 | Capscrew | 2 |
| 25***08 | Cap, Detent | 1 |
E3-5-2 Valve Assembly, Components
| 25***11 | Cap | 2 |
| 25***13 | Spring | 2 |
| 25***14 | Seat | 2 |
E3-4-4 Bucket End Mechanism
| 25***02 | Retainer, Wiper | 4 |
| 25***05 | O Ring | 2 |
| 25***01 | Cover, Spool | 1 |
E3-5-3 Bucket End Mechanism
| 25***02 | Retainer, Wiper | 4 |
| 25***05 | O Ring | 2 |
| 25***01 | Cover, Spool | 1 |
E3-10-1 Valve, Steering, And Adapters
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
E3-5-4 Lift End Mechanism
| 25***02 | Retainer, Wiper | 4 |
| 25***05 | O Ring | 2 |
| 25***02 | Cap, End | 2 |
E3-10-2 Valve Steering, Components
| 26***16 | G.A. | 1 |
| 35***03 | Pin | 1 |
| 35***04 | Ball, Check | 2 |
E3-4-5 Aux. End Mechanism
| 25***06 | O Ring | 1 |
| 25***07 | Capscrew | 2 |
| 25***08 | Cap, Detent | 1 |
E3-13-1 Valve, Diverter, 12 Volt
| 13***1Z | Bolt, M8x110 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 24***07 | O Ring | 6 |
E3-20-1 Lubricants & Filters
| 26***01 | G.A. | 1 |
| 26***03 | G.A. | 1 |
| 40***01 | Oil, Jcb T/C-25 Litre, Type C3 Sae 10w | 1 |
E3-12-2 Servo Filter, Installation, Loader Controls
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 16***02 | Adapter | 1 |
E3-4-7 Priority Steer Assy
| 25***27 | Screw | 4 |
| 25***06 | Cap, End | 2 |
| 25***42 | Valve, Section Assembly, Priority Steer | 1 |
E3-1-2 Solenoid Valve, Tow Hitch, 24 Volt
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
E3-2-1 Solenoid Valve, Components
| 25***00 | Valve, Solenoid | 1 |
| 25***01 | Screw, Cap | 4 |
| 25***02 | Plate, Rear Entry | 1 |
E3-20-2 Lubricants & Filters, Biodegradable
| 04***77 | Filter, Element | 1 |
| 26***26 | G.A. | 1 |
| 32***00 | Filter, Servo Hydraulic | 1 |
E3-13-2 Valve, Diverter, 24 Volt
| 13***1Z | Bolt, M8x110 | 2 |
| 14***2Z | Washer | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E3-4-6 Lift End Mechanism
| 25***02 | Retainer, Wiper | 4 |
| 25***05 | O Ring | 2 |
| 25***02 | Cap, End | 2 |
E3-12-1 Servo Filter, Installation, Loader Controls
| 16***02 | Adapter | 1 |
| 25***00 | Valve, Check, In Line | 1 |
| 26***17 | G.A. | 1 |
E3-5-1 Valve Assembly, 3 Spool & Adapters
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E3-4-2 Valve, Assembly, 4 Spool & Adapters
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
E4-13-1 Ram, Strimech, Heston Bale Grab &, Wrapped Bale Clamp
| 99***03 | Kit-Seal | 1 |
| 99***00 | Ram, Assembly | 1 |
| 99***01 | Cylinder | 1 |
E4-16-1 Ram, Log Grab
| 33***52 | Ram; Tighe Ref Cb-12 | 1 |
| 55***44 | Cylinder, W.A. | 1 |
| 55***45 | Rod, W.A.; San 22983.Cwe To 33***52.P Gamble 30/10/06, Ref Tighe Eng/Sue Chadwick | 1 |
E4-3-2 Ram, Lift
| 23***10 | O Ring | 2 |
| 24***06 | Seal, 50mm Rod | 2 |
| 24***35 | Seal, Piston | 2 |
E4-15-1 Ram, Log Grab, Manure Silage Fork, Fixed & Sliding , Bale Grab
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-5-1 Ram, Tilt
| 23***55 | O Ring | 4 |
| 23***08 | O Ring | 2 |
| 24***06 | Seal, 50mm Rod | 2 |
E4-14-1 Ram, Manure Fork, With Push Off
| 98***01 | Ram, Assembly | 1 |
| 98***02 | Nut | 1 |
| 98***03 | Kit-Seal, Ram | 1 |
E4-10-1 Ram, Steering, L.H.& R.H.
| 14***01 | Washer, Aluminium | 6 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 6 |
| 23***04 | O Ring | 2 |
E4-11-1 Ram, Attachment
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-6-1 Ram, Quickhitch
| 23***00 | O Ring | 1 |
| 24***01 | Seal, Gland | 1 |
| 24***27 | Seal | 1 |
E4-5-2 Ram, Tilt
| 23***55 | O Ring | 4 |
| 23***08 | O Ring | 2 |
| 24***06 | Seal, 50mm Rod | 2 |
E4-9-1 Ram, Tow Hitch
| 26***19 | Rod, Piston | 1 |
| 26***20 | Cap, End | 1 |
| 26***21 | Cylinder; Superseded To 26***36 On San 10***33 D.Jackson 30/07/09, Cylinder Nla | 1 |
F Axles, Wheels & Transmission
F1-15-1 Axle Assembly, Front Pd70, 18.16 : 1 Pad Mounted
| 13***7Z | Bolt, Coated | 4 |
| 13***16 | Bolt, M16x70l | 56 |
| 13***1Z | Nut | 8 |
F1-8-1 Differential, Limited Slip, Front
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F1-16-2 Differential, 458/11094, Front Axle
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F1-16-1 Differential, 450/38600, Front Axle
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F2-16-3 Differential, 458/11202, Rear Axle
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F2-3-1 Axle Pivot, Rear
| 13***6Z | Bolt, M12 X 70mm | 2 |
| 13***6Z | Bolt, M20 X 70 | 4 |
| 14***9Z | Washer | 2 |
F2-12-1 Differential, Limited Slip, Rear
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-15-1 Axle Assembly, Rear Pd 70, 18.16 : 1 Pivot Mounted
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 41***02 | Sealant, 50ml | 0 |
F2-16-2 Differential, 458/11095, Rear Axle
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F2-16-1 Differential, 450/38800, Rear Axle
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***00 | Sealant | 0 |
F3-4-2 Wheels & Tyres
| 26***00 | Valve, Angled | 1 |
| 41***00 | Wheel | 1 |
| 42***00 | Snowtyre Bstn17.5r25, Bridgestone Vsw2 | 1 |
F3-4-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 26***00 | Valve, Angled | 1 |
| 26***17 | Wheel, And Tyre Assembly, Goodyear | 1 |
F3-3-1 Wheel Brace, Retainer
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut | 2 |
F4-1-1 Propshafts, Transmission
| 11***25 | Strap | 8 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, M12 | 10 |
F5-1-9 Coupling Group
| 04***65 | Circlip | 1 |
| 04***76 | Spring | 2 |
| 04***77 | Plate, Backing | 2 |
F5-1-3 Torque Converter
| 04***08 | Converter | 1 |
F5-1-12 Output Flange
| 04***70 | Flange, Output | 1 |
| 04***71 | Cap, Sealing | 1 |
| 04***72 | Cap, Sealing | 1 |
F5-1-20 Oil Pipes, Transmission
| 04***85 | Adapter | 8 |
| 04***83 | Coupling; Supply 04/80***85 | 8 |
| 04***84 | Pipe | 1 |
F5-2-2 Transmission, & Converter Housing, Group
| 04***09 | Switch, Pressure, Transmission Oil | 1 |
| 04***01 | Sender, Oil Temperature | 1 |
| 04***00 | Transmission | 1 |
F5-3-2 Transmission, Mounting
| 14***1Z | Washer, M16 Plain | 4 |
| 82***04 | Washer, Hardened,Zinc Plated, M20 | 4 |
F5-1-19 Dipstick, Transmission
| 04***92 | Union, C/W Nut | 1 |
| 04***93 | Dipstick | 1 |
| 04***38 | O Ring | 1 |
F5-1-11 Output Group
| 04***46 | Bolt | 4 |
| 04***47 | Plate, Lock | 2 |
| 04***48 | Washer | 2 |
F5-1-18 Transmitter
| 04***81 | Transmitter | 2 |
| 04***14 | Sensor, Speed | 2 |
| 10***45 | Plug | 3 |
F5-1-14 Valve, Control
| 04***22 | Plug | 1 |
| 04***01 | Gasket | 1 |
| 04***02 | Capscrew | 16 |
F5-1-10 Coupling Group
| 04***54 | Circlip | 1 |
| 04***65 | Circlip | 1 |
| 04***76 | Spring | 2 |
F5-1-8 Coupling Group
| 04***65 | Circlip | 1 |
| 04***77 | Plate, Backing | 2 |
| 04***79 | Disc, Balancing 1.5mm | 4 |
F5-1-15 Valve, Control, Components, 04/805800, 04/806100
| 04***22 | Plug | 8 |
| 04***10 | Housing, Valve | 1 |
| 04***11 | Housing, Valve | 1 |
F5-1-2 Drive Plate Group
| 04***94 | Screw | 4 |
| 04***95 | Washer | 8 |
| 04***01 | Diaphragm | 2 |
F5-1-13 Power Take-Off
| 04***98 | Screw, Cap | 2 |
| 04***29 | Ring, Piston; Superseded By 04/60***86 (0734-401-267), D.Jackson 13/11/07 San25486 (Zf Request) | 1 |
| 04***43 | Ring, Retaining | 2 |
F5-1-6 Gearbox Housing
| 04***76 | Washer | 8 |
| 04***35 | Bolt | 8 |
| 04***97 | Screw, Cap | 3 |
F5-1-16 Filter, Transmission
| 04***26 | Bolt | 4 |
| 04***74 | Housing | 1 |
| 04***75 | Cover | 1 |
F5-1-17 Pressure Regulator
| 04***52 | Ball | 1 |
| 04***79 | Insert, Valve | 1 |
| 04***80 | Spring, Compression | 1 |
F5-2-1 Transmission, & Converter Housing, Group
| 04***09 | Switch, Pressure, Transmission Oil | 1 |
| 04***01 | Sender, Oil Temperature | 1 |
| 04***00 | Transmission | 1 |
F5-1-4 Pump, Oil
| 04***96 | Screw, Cap | 8 |
| 04***03 | Pump | 1 |
| 04***04 | Seal, Shaft | 1 |
F5-1-21 Dipstick, Transmission
| 13***7Z | Bolt, M10x25 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 26***58 | Bracket, Mounting Dipstick | 1 |
F5-1-5 Input Group
| 04***07 | Shaft, Turbine | 1 |
| 04***08 | Bearing, Roller | 1 |
| 04***09 | Gear, Input | 1 |
F5-1-7 Layshaft Group
| 04***47 | Axle | 1 |
| 04***48 | Gear, Idler | 1 |
| 04***49 | Bearing, Roller | 2 |
F5-1-1 Transmission, & Converter Housing, Group
| 04***09 | Switch, Pressure, Transmission Oil | 1 |
| 04***01 | Sender, Oil Temperature | 1 |
| 04***00 | Transmission | 1 |
F6-1-1 Cooler, Oil, Transmission
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
F6-1-2 Cooler, Oil, Transmission
| 13***3Z | Bolt, M8 X 55 | 1 |
| 13***3Z | Nut | 4 |
| 14***26 | Washer, Seal | 2 |
G Brakes
G1-9-1 Trailer Braking
| 26***30 | G.A. | 1 |
| 45***00 | Coupling, Male, 1/2"Bsp Qr | 1 |
| 61***00 | Hose | 1 |
G1-11-1 Kit Brake Housing
| 45***03 | Pin, Headed Backoff | 6 |
| 45***01 | Piston, Brake C/W 3 M6 Holes, 220mm X 55.5mm; Replaced By Mss 45***37 X2, 45***38 X2, See San 11269 | 2 |
| 45***02 | Housing; Replaced By Nsp See 45***01, See San 11268 | 2 |
G1-3-2 Brake, Parking, Control
| 13***2Z | Bolt | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
G1-5-2 Brake, Parking, Components
| 13***9Z | Bolt | 2 |
| 13***7Z | Bolt, M20 X 75 Lg. | 2 |
| 13***3Z | Nut, M16 | 2 |
G1-8-1 Brake, Components, High Retraction, Rear
| 22***71 | Circlip, External | 2 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
G1-6-1 Brake Pedal
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt, M10 X 100 | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 4 |
G1-1-5 Valve, Brake, Adapters & Switches, Fixed Flow
| 13***8Z | Screw, M8x30 | 2 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***0Z | Bolt | 4 |
G1-5-3 Brake Caliper, Parking
| 15***01 | Kit-Brake Pad; Replaced By 15/92***03 | 1 |
| 15***00 | Caliper, Park Brake | 1 |
| 15***03 | Kit, Spring | 1 |
G1-1-2 Valve, Brake
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
G1-10-1 Brake Components, Front, Lsd. Pd70
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
G1-1-3 Valve, Brake, Adapters & Switches, Variable Flow
| 13***7Z | Bolt, M10x25 | 4 |
| 13***2Z | Nut, Lock | 1 |
| 13***3Z | Nut, Lock, M10 | 4 |
H Steering
H1-1-3 Flexible Joint, Steering Column
| 12***61 | Plate, Retainer | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
H1-1-2 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***00 | Wheel, Steering | 1 |
H1-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***00 | Wheel, Steering | 1 |
N Engine 1004-4t (To M535352)
N1-6-1 Timing Case, Camshaft & Gears, Ad Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
N1-5-2 Fans, Pulleys, & Fan Belts, Optional Air Conditioning, Ad Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
N1-1-1 Engine, Complete, Ad Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged 106bhp | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ad Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
N1-2-1 Engine, Short, Ad Build
| 02***46 | Engine, Short, 1004-4t, Turbocharged | 1 |
N1-8-1 Engine Mountings, Ad Build
| 13***9Z | Screw, M10x35mm | 8 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
N1-7-1 Flywheel & Housing, Ad Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Dowel | 2 |
| 02***25 | Washer | 6 |
N1-5-1 Fans, Pulleys, & Fan Belts, Optional Air Conditioning, Ad Build
| 02***79 | Screw | 3 |
| 02***57 | Spacer, Fan, 25.4mm | 1 |
| 02***17 | Block, Thrust | 4 |
N1-3-1 Block Assembly, Ad Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N2-4-1 Lifting Plates, Engine, Ad Build
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Ad Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-3-1 Rocker Cover, Ad Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N2-1-1 Cylinder Head, Ad Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N3-3-1 Filter, Air, Ad Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
N3-4-1 Silencer, Ad Build
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***7Z | Bolt, M10x25 | 6 |
N3-3-2 Filter, Air, High Capacity, Ad Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
N3-1-1 Manifold, Induction, Ad Build
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
| 02***09 | Gasket | 1 |
N3-2-1 Manifold, Exhaust, Ad Build
| 02***01 | Gasket | 2 |
| 02***86 | Manifold, Exhaust | 1 |
| 02***39 | Gasket | 1 |
N4-4-1 Radiator & Hoses, Ad Build
| 22***12 | Clip, Jubilee | 5 |
| 26***84 | Radiator, Epoxy Coated | 1 |
| 30***00 | Radiator, Assembly | 1 |
N4-3-1 Radiator, Fittings & Mountings, Ad Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 11 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***4Z | Bolt, M12 X 60mm | 4 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Ad Build
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***45 | Gasket | 1 |
N4-5-1 Cooler, Air Charge, Ad Build
| 02***83 | Intercooler | 1 |
| 02***84 | Gasket | 1 |
| 02***93 | Connector | 1 |
N4-1-1 Pump, Water, Ad Build
| 02***82 | O Ring | 1 |
| 02***86 | Gasket | 1 |
| 02***87 | O Ring | 1 |
N5-2-1 Pump, Oil, & Relief Valve, Ad Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-5-1 Cooler, Oil, & Pipework, Ad Build
| 02***13 | Connector | 1 |
| 02***17 | O Ring | 4 |
| 02***31 | Gasket | 2 |
N5-4-1 Filter, Oil, & Oil Feed Adapter, Ad Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***96 | Gasket | 1 |
| 02***19 | Adapter, Oil Feed | 1 |
N5-1-1 Sump, Oil, Ad Build
| 02***69 | Gasket, Oil Sump | 1 |
| 02***00 | Sump, Oil | 1 |
| 02***03 | Olive | 1 |
N5-3-1 Piston Cooling Jets, Ad Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
N6-4-1 Fuel Pipes, Fuel Tank To Filter, Ad Build
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-8-1 Pump, Fuel Lift, Ad Build
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-6-1 Filter, Fuel Sediment, Ad Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
N6-1-1 Pump, Fuel Injection, Ad Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***76 | Gasket | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Ad Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-7-1 Filter, Fuel, Ad Build
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-3-1 Fuel Pipes, Injection Pump, Ad Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***17 | Nut | 5 |
N7-4-1 Compressor, Installation, Air Conditioning
| 02***23 | Bolt | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
N7-5-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
N7-2-1 Turbocharger, Pipework & Mounting, Ad Build
| 02***21 | Bracket | 1 |
| 02***86 | Clip | 1 |
| 02***88 | Adapter | 1 |
N7-1-2 Turbocharger, Ad Build
| 02***68 | Clip | 2 |
| 02***72 | Ring | 1 |
| 02***73 | Rod, Actuator | 1 |
N7-1-1 Turbocharger, Ad Build
| 02***68 | Clip | 2 |
| 02***70 | Actuator, Wastegate | 1 |
| 02***72 | Ring | 1 |
N8-1-1 Gasket Sets, Ad Build
| 02***77 | Kit-Gasket, Bottom | 1 |
| 02***41 | Kit-Gasket, Top | 1 |
N8-2-1 Kit, Engine Overhaul, Ad Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
P Engine 1004-4t Low Emission, (From M535353)
P1-5-3 Fans, Pulleys, & Fan Belt, Am Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***71 | Belt, Fan, Pair | 1 |
P1-5-2 Fans, Pulleys, & Fan Belts, Optional Air Conditioning, Am Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***79 | Belt, Fan, Pair | 1 |
P1-2-2 Engine, Long, Am Build, 115 Bhp
| 02***41 | Motor, Long | 1 |
P1-2-1 Engine, Short, Am Build
| 02***60 | Engine, Short, Turbo | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt, Am Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***79 | Belt, Fan, Pair | 1 |
P1-3-1 Block Assembly, Am Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-1-1 Engine, Complete, Am Build
| 01***00 | Engine, Complete, 1004-4t, 115bhp | 1 |
| 01***00 | Engine, Complete 1004-4t,24v, Turbo-A/Cool, 115bhp | 1 |
P1-8-1 Engine Mountings
| 13***9Z | Screw, M10x35mm | 8 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
P1-5-4 Fans, Pulleys, & Fan Belts, Optional Air Conditioning, Am Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***71 | Belt, Fan, Pair | 1 |
P1-7-1 Flywheel & Housing, Ak & Am Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Dowel | 2 |
| 02***25 | Washer | 6 |
P1-6-1 Timing Case, Camshaft & Gears, Am Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Am Build
| 02***38 | Key | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 1 |
P2-4-1 Lifting Plates, Engine, Am Build
| 02***19 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-1-1 Cylinder Head, Am Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Am Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-3-1 Rocker Cover, Am Build
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
| 02***34 | Nut, Sleeve | 3 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Am Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P3-4-2 Silencer & Extension, 'Q'Build
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***8Z | Bolt, M10 X 30 | 2 |
P3-1-2 Cooler, Air Charge, Pipework, Am Build
| 02***94 | Connector | 1 |
| 02***85 | Adapter | 1 |
| 02***80 | Hose, Water Cooling | 1 |
P3-1-1 Manifold, Induction, & Air Charge Cooler, Am Build
| 02***94 | Seal | 2 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***73 | Manifold, Induction/Cooler | 1 |
P3-3-2 Filter, Air, High Capacity, Am Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***15 | Clip, Jubilee | 2 |
P3-2-1 Manifold, Exhaust, Am Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P3-4-1 Silencer & Extension, Am Build
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***7Z | Bolt, M10x25 | 4 |
P3-3-1 Filter, Air, Am Build
| 13***3Z | Screw, M8 X 16 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
P4-2-2 Thermostat, Housing, Inlet & Outlet, Am Build
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Am Build
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-4-1 Radiator & Hoses, Am Build
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0Z | Bolt | 2 |
| 13***4Z | Bolt | 1 |
P4-3-1 Radiator, Fittings & Mountings, Am Build
| 13***5Z | Bolt | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 6 |
P4-1-1 Pump, Water, Am Build
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***00 | Pump, Water | 1 |
| 02***00 | Pump, Water | 1 |
P5-1-1 Sump, Oil, Am Build
| 02***26 | Spacer | 1 |
| 02***73 | Gasket | 1 |
| 02***82 | Plug, Oil Drain | 2 |
P5-4-1 Filter, Oil, & Oil Feed Adaptor, Am Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***19 | Adapter, Oil Feed | 1 |
| 02***79 | Gasket | 2 |
P5-5-2 Cooler, Oil, Filter & Pipework, Am Build
| 02***98 | Plug | 2 |
| 02***13 | Connector | 1 |
| 02***17 | O Ring | 4 |
P5-5-1 Cooler, Oil, Filter & Pipework, Am Build
| 02***13 | Connector | 1 |
| 02***17 | O Ring | 4 |
| 02***31 | Gasket | 2 |
P5-2-1 Pump, Oil, & Relief Valve, Am Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-3-1 Piston Cooling Jets, Am Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter, Am Build
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 2 |
P6-3-1 Fuel Pipes, Injection Pump, Am Build
| 02***87 | Damper, Vibration | 4 |
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
P6-8-1 Pump, Fuel Lift, Am Build
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P6-1-1 Pump, Fuel Injection, Am Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***86 | Bracket | 1 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Am Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Am Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-1-2 Pump, Fuel Injection, Am Build
| 02***22 | Olive | 1 |
| 02***79 | Nut | 1 |
| 02***86 | Bracket | 1 |
P6-6-1 Filter, Fuel Sediment, Am Build
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P6-7-1 Filter, Fuel, Am Build
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P7-5-3 Compressor 24volt, Air Conditioning, Sd7h15#8163 Green Label
| 12***99 | Compressor, 24v | 1 |
| 14***67 | Cover, Bearing Dust | 1 |
| 26***84 | Coil, Field | 1 |
P7-3-1 Heater, Engine Block
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
P7-5-1 Compressor, Air Conditioning, 12volt
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-5-2 Compressor 24volt, Air Conditioning, Sd7h15#4652 White Label
| 12***99 | Compressor, 24v | 1 |
| 14***24 | Kit-Sundry Parts | 1 |
| 14***67 | Cover, Bearing Dust | 1 |
P7-4-1 Compressor, Installation, Air Conditioning
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Am Build
| 02***19 | Adapter, Oil Feed | 1 |
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
P7-1-1 Turbocharger, Am Build
| 02***50 | Turbocharger | 1 |
| 02***51 | Housing, Centre, Assembly | 1 |
| 02***52 | Housing, Compressor | 1 |
P7-1-2 Turbocharger, Am Build
| 02***50 | Turbocharger | 1 |
| 02***51 | Housing, Centre, Assembly | 1 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
P8-1-1 Gasket Sets, Am Build
| 02***49 | Kit-Gasket, Top | 1 |
P8-2-1 Gasket Set, Bottom, Am Build
| 02***31 | Kit-Gasket, Bottom | 1 |
412S LE serial number reference
The machine identification plate is mounted on the left-hand side of the machine on the loader arm pillar. The plate displays the World Manufacturer Identifier (SLP), machine model (412S0), year of manufacture code, manufacturing location (E for England), and the machine serial number. For machines with the JCB 444 Series engine, the engine serial number is stamped on a plate fastened to the right side of the cylinder block near the fuel filter. Confirm applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 535500 | Smoothshift Transmission introduced for 412S Wheeled Loading Shovel from this serial number upward. | Confirmed by JCB Service Manual for 412S/414S/416S Wheeled Loading Shovels. Note: The 412S is a wheeled loader, not a backhoe. |
| 1242000 | JCB 444 Series engine added to 412S Wheeled Loading Shovel from this serial number upward. | Confirmed by JCB Service Manual for 412S/414S/416S Wheeled Loading Shovels. Engine serial plate location: right side of cylinder block near fuel filter. |
Frequently asked questions
What engine does the JCB 412S use?
The JCB 412S uses a JCB 2257 four-cylinder turbocharged engine. Units from serial number the OEM part reference onwards utilize the JCB 444 Series engine. Net power is 147.6 hp (110 kW).
What is the operating weight of the JCB 412S?
The operating weight is approximately 8.182 tons (8,182 kg). Static tipping weight is 8,754.6 lb (3,971 kg).
What model replaced the JCB 412S?
The JCB 414S and 416S wheeled loaders succeeded the 412S in the same product line, sharing similar service manuals and structural frameworks.
What 412S LE owners discuss
What are the known powertrain and hydraulic behaviors for the JCB 412S, particularly regarding the tandem pump and transmission shifts?
Operators report that the smaller stage of the tandem hydraulic pump can remain under constant pressure (approximately 90 bar) when the system warms up, which may cause weak steering. Flow testing often reveals both pump stages operating at only 60% of full flow when loaded to 200 bar. For the transmission, gear shifting issues in the 412S Series 3 often stem from faulty solenoids, relays, or gasket leaks that disrupt hydraulic fluid flow. A leaking torque converter can also cause low pressure and slipping. Smoothshift transmission was introduced for the 412S starting from machine serial number the OEM part reference.
What undercarriage or wear patterns are typical for this machine type?
The JCB 412S is a wheeled loader, so it utilizes tires rather than track undercarriage. Wear patterns typically involve the front and rear axle housings and hubs, which require specific lubricants. The machine is built for versatility in construction, agriculture, and landscaping, with a robust frame designed to handle tough working conditions. Bucket wear is common, with a standard heaped capacity of 1.31 cubic yards (1 cubic meter) and a struck capacity of 1.1 cubic yards (0.84 cubic meters).
What engine quirks are associated with the JCB 412S series?
The JCB 412S was equipped with the JCB 444 Series engine starting from machine serial number the OEM part reference. Prior to this serial break, earlier units used different engine configurations. Common engine faults include difficulty starting, gradual loss of power, and unusual noises such as deep, rhythmic knocking under load, which indicates serious internal problems. Starting problems are the single most common reason owners seek troubleshooting help.
What are the common electrical or sensor issues reported by owners?
Electrical issues often involve the forward/reverse lever microswitches that activate hydraulic solenoids on the transmission body. Faulty solenoid connectors or unresponsive relays can prevent gear engagement. The machine uses an Electronic Control Unit (ECU) that stores Diagnostic Trouble Codes (DTCs) for EMS electrical faults, including open circuits, short circuits, and CAN bus communication errors. Wiring harnesses in some JCB machines have been noted for using white wiring, which can complicate diagnostics if not properly identified.
What should be checked when buying a used 412S LE?
Verify the machine serial number to determine if it has the Smoothshift transmission (serial the OEM part reference and up) or the JCB 444 Series engine (serial the OEM part reference and up). Check the identification plate mounted on the left-hand side of the loader arm pillar. Inspect the smaller tandem hydraulic pump for constant pressure when warm. Test the torque converter for internal leaks. Verify the condition of the solenoid connectors and gaskets on the transmission. Check the coolant level and condition, as the OAT JCB coolant range is designed for heat transfer efficiency and corrosion protection.
What are the fluid specifications and capacities for the JCB 412S?
The machine requires specific JCB branded fluids or verified equivalents. Engine oil capacity is approximately 11.1 liters (2.5 UK gallons), using JCB 15W/40 Multigrade for temperatures between -10°C and 50°C. The fuel tank capacity is 83.2 liters (18.3 UK gallons). Coolant mixtures with 55% antifreeze start to freeze at -36°C (-33°F). Hydraulic system capacity varies by configuration; fill with all rams closed and check the sight glass. Use genuine JCB hydraulic oil for high-quality base oils and additive technology.
How is the manufacturing year determined for the JCB 412S?
The manufacturing year is encoded in the 10th character of the 17-character PIN for modern JCBs, using a letter code that skips I, O, Q, U, and Z. For older machines, the year code is found in the VIN structure, where specific letters correspond to years (e.g., S = 1995, T = 1996, V = 1997, W = 1998, X = 1999, Y = 2000, 1 = 2001, 2 = 2002, 3 = 2003, 4 = 2004). The World Manufacturer Identifier (WMI) for Rocester-built machines is SLP.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 412S LE. Related factory variants of the same model family:
412S LE
Need a specific 412S LE part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.