JCBagriculturalwheeled loaders
Jcb 408ZX
Maintenance schedule, common problems & OEM parts breakdown
The JCB 408ZX is a compact wheel loader manufactured from 2001 to 2008 with an operating weight of approximately 4.7 tons (10,670 lbs). It is powered by a naturally aspirated 4-cylinder Perkins 1104C-44 engine producing 75 hp (55.9 kW) with a displacement of 4.4 L (4401.6 cc). The machine features a hydrostatic transmission with two forward and two reverse gears, reaching a maximum speed of 20.1 km/h (12.5 mph). It offers a heaped bucket capacity of 0.8 m³ (1.05 yd³) and a static tipping load of 3,388 kg (7,470 lbs). The 408ZX succeeded the JCB 408BZX (1997–2001) and was followed by the JCB 409ZX and 411ZX series. Configurations included standard and high-lift loader arms with various bucket widths and tire options.
Across its production run, the 408ZX evolved from the earlier 408BZX platform, introducing updated Perkins engine integration and refined hydrostatic drive components. The machine remains relevant in the used market due to its simple, non-DEF Dieselmax powertrain and accessible maintenance intervals that favor long-term fleet utility. Its compact dimensions and 4.7-ton weight allow operation in confined spaces while maintaining sufficient breakout force of 4,254 kg (9,380 lbs) for general material handling. The availability of compatible Fleet Tec filters and the machine's widespread use in municipal and agricultural sectors sustain demand for replacement parts and service expertise.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 408ZX specifications
Engine
| Model | 1104C-44 |
| Gross Power | 75 hp (55.9 kW) |
| Power Measured At | 67 rpm |
| Displacement | 268.6 cu in (4401.6 cc) |
| Cylinders | 4 |
| Aspiration | Naturally aspirated |
| Peak Torque | 222.8 lb ft (302.1 N-m) |
| Torque Measured At | 1400 rpm |
Weights
| Operating Weight | 10670 lbs (4839.8 kg) |
| Static Tipping Weight | 7470 lbs (3388.3 kg) |
Dimensions
| Overall Length (With Bucket On Ground) | 192 in (487.7 cm) |
| Wheelbase | 84 in (213.4 cm) |
| Ground Clearance | 12 in (30.5 cm) |
| Height To Top Of Cab | 108 in (274.3 cm) |
| Bucket Hinge Pin Max Height | 120 in (304.8 cm) |
| Reach At Max Lift And Dump | 24 in (61.0 cm) |
| Dump Clearance At Max Raise | 96 in (243.8 cm) |
| Turning Radius | 156 in (396.2 cm) |
| Bucket Width | 72 in (182.9 cm) |
Performance
| Max Speed (Forward) | 12.5 mph (20.1 km/h) |
| Max Speed (Reverse) | 12.5 mph (20.1 km/h) |
| Breakout Force | 9380 lbs (4254.7 kg) |
| Raise Lift Arms Time | 5 sec |
| Lower Lift Arms Time | 3.2 sec |
| Bucket Dump Time | 1 sec |
| Relief Pressure | 319 psi (22.0 bar) |
| Pump Flow | 17.5 GPM (66.2 LPM) |
Service capacities (summary)
| Fuel Tank | 26.5 gal (100.3 l) |
| Hydraulic System | 22.5 gal (85.2 l) |
| Engine Oil | 2.5 gal (9.5 l) |
| Cooling System | 4.1 gal (15.5 l) |
| Front Axle/Diff | 2.6 gal (9.8 l) |
| Rear Axle/Diff | 2.8 gal (10.6 l) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
408ZX fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 9.5 l (2.5 gal) | JCB 15W/40 Multigrade (–10 °C to 50 °C / 14 °F to 122 °C); JCB Super Universal Agricultural 10W/30 (–15 °C to 30 °C / 5 °F to 86 °F) |
| Cooling System | 15.5 l (4.1 gal) | JCB Universal Antifreeze / water (55% mixture; freezes at –36 °C / –33 °F) |
| Fuel Tank | 100.3 l (26.5 gal) | Diesel Oil |
| Transmission / Powertrain | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Final Drives | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System and Tank | 85.2 l (22.5 gal) | JCB Special Hydraulic Fluid (up to 30 °C / 86 °F); JCB Hydraulic Fluid 46 (over 30 °C / 86 °F) |
| Axles / Differentials | Front: 9.8 l (2.6 gal); Rear: 10.6 l (2.8 gal) | JCB Special Gear Oil |
| Grease | Not documented for this exact serial range — verify with your dealer | JCB HD90 Gear Oil (API-GL-5, MIL-L-2105D) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 408ZX maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 408ZX beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid samples at the 500-hour interval are critical for the 408ZX Perkins 1104C-44 engine and hydrostatic transmission. Monitor engine oil for soot loading and coolant for glycol concentration to prevent corrosion in the 15.5 L (4.1 gal) system. Hydraulic oil analysis detects gear pump wear and seal degradation in the 85.2 L (22.5 gal) circuit. Axle oil samples reveal differential gear wear in the front (9.8 L) and rear (10.6 L) hubs. Extend intervals only if lab results confirm cleanliness; otherwise, compress the 500-hour oil change schedule to protect the common-rail injectors.
Corrective & Common Repairs
The 408ZX hydrostatic transmission relies on precise belt tension for the alternator and accessory drives; loose belts cause charging failures and overheating. Replace fuel filters every 250 hours to prevent injector damage from contaminated diesel. Inspect the turbocharger boots and wastegate function during the 500-hour service to address boost leaks. Check hydraulic relief valve settings (22.0 bar / 319 psi) if lift times exceed 5 seconds. Replace worn bucket teeth and cutting edges to maintain the 4,254 kg (9,380 lbs) breakout force and reduce structural stress on the loader arms.
Overhaul & Rebuild Points
The 2,000-hour interval marks the primary overhaul threshold for the 408ZX. Inspect the Perkins 1104C-44 engine timing and valve clearances to restore compression and efficiency. Check the hydrostatic pump flow (66.2 L/min) and gear wear if hydraulic performance declines. Measure swing ring play if the model includes a rotating attachment interface. Inspect the chassis and loader arms for cracks near the hinge pins (304.8 cm / 120 in height). Replace all seals in the hydraulic system during the 2,000-hour oil change to prevent external leaks and contamination.
Seasonal & Environment Servicing
In cold climates, verify the cooling system mixture strength to protect the 15.5 L (4.1 gal) capacity against freezing. Check battery electrolyte levels in non-sealed units and clean terminals to ensure reliable 12 V starting. In dusty environments, inspect the air filter restriction indicator frequently and replace the primary element as needed to protect the 4.4 L engine. Grease all pivot points daily to prevent abrasive wear from sand or mud. Store the machine under cover to protect the cab HVAC system and electrical components from moisture and UV degradation.
408ZX common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925371 | Element, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 32/925543 | Filter, Fuel Sediment | Fuel system service | Check fitment → |
| 17/919300 | Pump, Electric Fuel Lift, Filter Assembly | Fuel system service | Check fitment → |
| 02/203106 | Element, Oil Cooler | Lubrication service | Check fitment → |
| 02/100073 | Element, Oil Filter, Canister Type - Long | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
408ZX fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Clogged primary fuel filter, lift pump failure, or air leaks on the suction side. | Replace primary fuel filter; verify lift pump primes at key-on; inspect suction-side hoses for air leaks. |
| P0191 | Fuel rail pressure sensor performance | Erratic rail pressure readings confusing the ECU due to sensor failure or wiring issues. | Check fuel filter age; test sensor 5V reference and ground; wiggle-test connector for intermittent faults. |
| P2201 | NOx sensor out of range | Common trigger for regeneration loops and DEF warnings due to sensor malfunction or exhaust leaks. | Inspect NOx sensor connector and harness; check for exhaust leaks upstream of the sensor. |
| P20EE | SCR NOx efficiency low | SCR system reports poor conversion, often caused by DEF injector issues or sensor faults rather than catalyst failure. | Verify DEF is fresh 32.5% urea; inspect DEF injector for crystals; verify NOx sensor operation. |
| P1C54 | SCR inducement derate | Power reduction applied as a penalty for unresolved emissions faults. | Fix the root SCR/DEF code first; top off clean DEF; complete parked regeneration if required. |
| U0073 | CAN bus off | Module network drop, often caused by battery/ground issues before ECU failure. | Load-test battery; clean ground connections; inspect harness at articulation points for chafing. |
| ENG OIL | Engine oil pressure low | Oil pressure below safe threshold due to low level, leaks, or sensor failure. | Check oil level immediately; inspect for leaks and filter condition; test sensor before condemning the pump. |
| T135 | Transmission oil temperature high | Transmission overheating due to low oil level or blocked cooler. | Check transmission oil level; inspect cooler fins for debris; allow machine to cool down before heavy work. |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Damaged harness, faulty sensor, or signal loss preventing engine synchronization. | Inspect crank sensor connector and wiring; verify sensor gap and signal output with diagnostic tool. |
| P1093 | Common Rail Pressure Fault (Lack of Feed) | Fuel supply restriction or pump failure preventing rail pressurization. | Check fuel tank venting; inspect lift pump operation; verify fuel filter condition and suction line integrity. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
408ZX attachments & work tools
Buckets
Standard configurations include a 0.8 m³ (0.9 cu yd) struck capacity and 0.8 m³ (1.05 cu yd) heaped capacity bucket with a 1900 mm (72 in) width. Variations include Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading buckets for specific material handling tasks.
Quickhitch Systems
The machine utilizes a Q-Fit pick-up system for attachment engagement, allowing for manual or hydraulic quick hitch operation. This system enables rapid switching between buckets, forks, and breakers to minimize downtime.
Hydraulic Breakers
An OEM hydraulic breaker range is available, designed to operate in harmony with the machine's hydraulic system. The system requires a relief pressure setting of 22.0 bar (319 psi) and a pump flow of 66.2 LPM (17.5 GPM) to function effectively.
Forks and Fork Frames
Fork attachments are supported by the quick hitch system for material handling applications. These tools allow the wheel loader to function as a material handler, increasing fleet versatility.
Lifting Equipment
Lifting equipment with a capacity range of 0.15 to 4 tonnes is available for safe handling of suspended loads. These attachments feature a compact design to improve operator visibility and utilize the Q-Fit pick-up for easy attachment.
Specialist Attachments
The range includes specialist attachments for tough applications, such as earth drills/augers, grabs and grapples, and snow attachments. These tools enhance the machine's versatility across construction, agriculture, and landscaping sectors.
Hydraulic Kit Requirements
Attachments such as breakers and tilt rotators require connection to the machine's hydraulic system. The base hydraulic capacity is 85.2 L (22.5 gal), with a gear pump providing 66.2 LPM (17.5 GPM) at a relief pressure of 22.0 bar (319 psi).
All 408ZX assemblies by section
Every catalogued assembly group for the Jcb 408ZX. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-7-1 Shovel, Clam, 6 In 1, 0.75cu.M., Jcb Quickhitch
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-6-1 Shovel G.P., 1.25cu.Yd.
| 27***88 | Toeplate | 1 |
| 52***00 | Shovel, G.P. 1.25 Cu. Yd., (Usa) | 1 |
A1-26-1 Shovel, 0.7cu.M.
| 13***1Z | Nut | 12 |
| 27***12 | Toeplate | 1 |
| 27***22 | Tooth | 6 |
A1-36-1 Shovel, G.P,0.9cu.M.,1900mm, Bolt-On Teeth,Zettlemeyer
| 13***1D | Nut | 16 |
| 27***22 | Tooth | 8 |
| 33***52 | Toeplate | 1 |
A1-17-2 Shovel 6 In 1, ( Zettlemeyer Q.H.), 408b
| 12***01 | Bush | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A1-14-1 Shovel G.P, 0.8cu.M., Jcb
| 13***1Z | Nut | 14 |
| 27***12 | Toeplate | 1 |
| 27***22 | Tooth | 7 |
A1-7-2 Shovel, Clam, 6 In 1, 0.70cu.M.1900mm
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-5-1 Shovel G.P, 1.0cu.Yd.
| 27***12 | Toeplate | 1 |
| 52***00 | Shovel, G.P. 1 Cu. Yd, (Usa) | 1 |
A1-23-1 Stone Shovel
| 98***16 | Shovel, Stone, 1750mm | 1 |
A1-8-1 Shovel, Clam, 6 In 1, 0.85 Cu.M, Jcb Quickhitch
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-21-1 Toeplate, Bolt On, 1900mm
| 13***1Z | Nut | 15 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 15 |
| 27***89 | Toeplate, Bolt-On, 1900mm | 1 |
A1-27-1 Shovel, 0.8cu.M.
| 13***1Z | Nut | 12 |
| 27***12 | Toeplate | 1 |
| 27***22 | Tooth | 6 |
A1-19-1 Shovel G.P., (Zettlemeyer Q.H.), 407b
| 98***51 | Attachment, Shovel G.P. 407b, ( Zettlemeyer Q.H. ) | 1 |
| 98***59 | Tooth Kit | 8 |
A1-29-1 Shovel, 1.0cu.M.
| 27***21 | Shovel, G.P. 1.0 Cu M; Uses Bolt On Toeplate On A1-21-1. Light Duty Shovel For Low Density Material | 1 |
| 27***36 | Toeplate, Weld On | 1 |
A1-16-1 Shovel G.P, 0.9cu.M., Jcb
| 27***88 | Toeplate | 1 |
| 52***00 | Shovel, G.P. 0.9 Cu.Metre | 1 |
A1-12-1 Shovel, Clam, 6 In 1, 0.65cu.M., Jcb Quickhitch
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-22-1 Guard, Tooth
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 27***00 | Guard, Tooth, 1900mm | 1 |
| 27***00 | Guard, Tooth, 1750mm | 1 |
A1-17-1 Shovel 6 In 1, 0.65cu.M.1900 Wide), 407b (Zettlemeyer Quickhitch)
| 12***01 | Bush | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A1-14-3 Shovel G.P, 0.85cu.M.
| 13***1Z | Nut | 16 |
| 27***88 | Toeplate | 1 |
| 27***22 | Tooth | 8 |
A1-25-2 Shovel G.P, (Jcb Quickhitch ), 408b
| 13***1Z | Nut | 2 |
| 82***07 | Bolt | 2 |
| 98***57 | Attachment, Shovel G.P. 408b, ( Jcb Quickhitch ) | 1 |
A1-9-1 Shovel, Clam, 6 In 1, 0.65 Cu.M
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-13-1 Shovel G.P, 0.7cu.M., Jcb
| 13***1Z | Nut | 14 |
| 27***12 | Toeplate | 1 |
| 27***22 | Tooth | 7 |
A1-30-1 Shovel & Tooth Assy, 0.9cu.M., Sales Special
| 13***1D | Nut | 8 |
| 27***22 | Tooth | 8 |
| 52***00 | Kit, Tooth | 1 |
A1-19-2 Shovel G.P., (Zettlemeyer Q.H.), 408b
| 98***53 | Attachment, Shovel G.P. 408b, (Zettlemeyer Q.H. ) | 1 |
| 98***59 | Tooth Kit | 8 |
A1-18-2 Shovel 6 In 1, (Jcb Quickhitch), 408b
| 12***01 | Bush | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A1-20-1 Toeplate, Bolt On, 1750mm
| 13***1Z | Nut | 13 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 13 |
| 27***15 | Toeplate, Bolt-On, 1750mm | 1 |
A1-31-1 Shovel, 1.1cu.M., Sales Special
| 27***88 | Toeplate | 1 |
| 97***22 | Shovel, 1.1cu.M. | 1 |
A1-10-1 Shovel, Clam, 6 In 1, 0.75 Cu.M
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-18-1 Shovel 6 In 1, (Jcb Quickhitch), 407b
| 12***01 | Bush | 1 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A1-35-1 Shovel, G.P,0.9cu.M.,1900mm, Welded Teeth,Zettlemeyer
| 33***84 | Toeplate, Front | 1 |
| 33***28 | Tooth | 8 |
| 33***29 | Tooth, Adapter | 8 |
A1-15-1 Fork Frames & Forks, Industrial
| 27***00 | Fork, Frame | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
| 54***00 | Fork, Industrial, 100w X 45t X 1200l | 1 |
A1-25-1 Shovel G.P, (Jcb Quickhitch ), 407b
| 13***1Z | Nut | 2 |
| 82***07 | Bolt | 2 |
| 98***55 | Attachment, Shovel G.P. 407b, ( Jcb Quickhitch ) | 1 |
A1-28-1 Shovel, 0.9cu.M.
| 13***1Z | Nut | 14 |
| 27***88 | Toeplate | 1 |
| 27***22 | Tooth | 7 |
A1-3-1 Shovel G.P, 0.8cu.M.
| 13***1Z | Nut | 14 |
| 27***12 | Toeplate | 1 |
| 27***22 | Tooth | 7 |
A1-7-3 Shovel, Clam, 6 In 1, 0.75cu.M.1900mm, Bolt-On Toeplate Option
| 12***01 | Bush | 1 |
| 13***4D | Bolt | 2 |
| 13***6D | Bolt, M8x70 | 2 |
A1-24-1 Stone Shovel, 1900mm
| 98***04 | Shovel, Stone, 1900 mm | 1 |
A1-14-2 Shovel G.P, 0.8cu.M.
| 27***88 | Toeplate | 1 |
| 52***00 | Shovel, G.P. .8 Cu M, 1900mm | 1 |
A1-2-1 Shovel G.P, 0.7cu.M.
| 13***1Z | Nut | 14 |
| 27***12 | Toeplate | 1 |
| 27***22 | Tooth | 7 |
A1-11-1 Shovel, Clam, 6 In 1, 0.85 Cu.M
| 12***01 | Bush | 1 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-4-1 Shovel G.P, 0.9cu.M.
| 13***1Z | Nut | 16 |
| 27***88 | Toeplate | 1 |
| 27***22 | Tooth | 8 |
A3-5-2 Shovel, Side Tip R.H. 409b, ( Zettlemeyer Quickhitch )
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 2 |
A3-12-3 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
A3-50-1 Level Indicator, Shovel
| 12***02 | Bracket, Saddle | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***2Z | Nut, Lock | 1 |
A3-3-1 Hose And Pipework, Quickhitch Isolation
| 13***7D | Setscrew, M8x25 | 1 |
| 13***9D | Bolt, Special M6x90 | 2 |
| 13***3D | Bolt, M8 X 55mm | 1 |
A3-12-2 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-15-1 Fork Frames & Forks, Industrial
| 24***00 | Wheel, Assembly, 12x16.5nhs | 1 |
| 27***00 | Fork, Frame | 1 |
| 54***00 | Fork, Assembly, 100w X 45t X 1067l | 1 |
A3-1-1 Quickhitch
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
A3-12-4 Sweeper Collector, Mounting Frame, ( Zettlemeyer Quickhitch )
| 13***3Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 14***1Z | Washer, M16 Plain | 2 |
A3-5-1 Shovel, Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 2 |
A3-2-1 Quickhitch, Jcb
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
A3-2-2 Quickhitch, Auxiliary Pipework
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-13-2 Sweeper Collector, Mounting Frame, ( Zettlemeyer Quickhitch )
| 13***3Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 14***1Z | Washer, M16 Plain | 4 |
A3-12-5 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-7-1 Grapple, Industrial, 1900mm ( Zettlemeyer Q.Hitch )
| 98***20 | Attachment, Industrial Grapple, ( Zettlemeyer Q.H.) | 1 |
| 98***14 | Pin | 10 |
| 98***15 | Pin, Pivot | 10 |
A3-12-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A3-1-2 Quickhitch, Auxiliary Pipework
| 13***8Z | Screw, M8x30 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
A3-6-1 Grapple, Industrial
| 90***00 | Ram, Assembly, Left Side | 1 |
| 90***00 | Ram, Assembly, Right Side | 1 |
| 98***03 | Attachment, Industrial | 1 |
B Bodywork, Cab, Loader End
B1-14-1 Hitch Recovery, Manual
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***3Z | Nut, M20 | 2 |
| 14***2Z | Washer, M20 | 4 |
B1-5-1 Tank, Diesel Fuel, & Fittings
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 12***39 | Strainer, Fuel, Gauze | 1 |
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
B1-13-2 Fenders, Rear
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***3Z | Bolt, M10 X 55 | 4 |
| 13***3Z | Nut, Lock, M10 | 10 |
B1-17-3 Mounting, In Board, Front Lights, Sales Special
| 13***8D | Setscrew, M10 X 30 | 4 |
| 14***8D | Washer, M10 | 4 |
| 33***54 | Bracket, In Board Light, Left Side | 1 |
B1-9-1 Engine Cover, Top Panel
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 4 |
| 13***3D | Nut, Self Lock M10 | 2 |
B1-16-1 Blanking Plate, Fog Light
| 13***0Z | Bolt, M10 X 40 | 4 |
| 14***4Z | Washer | 4 |
| 27***51 | Plate, Blanking | 2 |
B1-13-1 Fenders, Front
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***0D | Bolt, M10 X 40mm Long | 4 |
| 13***4D | Bolt, M10 X 60mm | 2 |
B1-17-1 Mounting, Front Lights
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 27***00 | Bracket, Light, Left Side | 1 |
B1-17-2 Mounting, Front Lights, Italian
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 27***00 | Bracket, Light/Fuel Filler, Italy | 1 |
B1-12-2 Counterweight, Rear
| 13***8D | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***4Z | Washer | 4 |
B1-6-1 Tank, Hydraulic
| 12***77 | Cover | 1 |
| 12***53 | Gauge, Sight | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 15 |
B1-4-1 Steer Ram Pivots
| 13***9Z | Bolt, M10x90mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***18 | Spacer, 0.5mm | 2 |
B1-13-3 Wide Fenders
| 13***9D | Bolt, M10 X 35mm Long | 16 |
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***0D | Bolt, M10 X 40mm Long | 6 |
B1-1-1 Chassis Front & Rear
| 12***02 | Plate, Compression | 2 |
| 13***0D | Setscrew, M10 X 40mm | 4 |
| 13***0Z | Bolt, M12x40 | 1 |
B1-3-1 Centre Pivot
| 13***3Z | Bolt, M10 X 16 | 4 |
| 13***5D | Setscrew, M10 X 20 | 4 |
| 13***32 | Bolt | 4 |
B1-21-1 Access Door, Air-Conitioning
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 9 |
B1-12-1 Counterweight, Rear
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***9Z | Bolt, M20 X 90 | 2 |
| 13***8D | Bolt | 2 |
B1-7-2 Cover, Engine, Blue Angel Soundproofing
| 12***00 | Latch, Claw | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
| 13***3Z | Screw, M6x16 | 2 |
B1-15-1 Mounting, Chock
| 12***01 | Strap | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***63 | Chock, Wheel, Chock, Wheel; Black Painted. New Zinc Plated Wheel Chocks Can Be Supplied With Zinc Plated Mounting., Chock, Wheel; See Note 1. May Be Used In Place Of Item 1 If Required, Chock, Wheel; Black Painted. New Zinc Plated Wheel Chocks Can Be Supplied With Zinc Plated Mounting | 1 |
B1-20-1 Air-Con, Installation
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***26 | Receiver, Drier; San 21498.Ref T Reece-Evans.Says Same As The, 14***26.Reinstated San 22427.Tim Wrong | 1 |
B1-7-1 Cover, Engine
| 12***00 | Latch, Claw | 1 |
| 12***67 | Handle, C/W Barrel Lock Only | 1 |
| 13***3Z | Screw, M6x16 | 2 |
B1-8-1 Engine Side Panels
| 14***8D | Washer, M10 | 8 |
| 27***57 | Panel, Assembly, Right Side | 1 |
| 33***16 | Panel, Left Side | 1 |
B1-22-1 Restrant, Air-Con Door
| 12***00 | Strap | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***4Z | Bolt | 1 |
B1-11-1 Soundproofing, Engine Cover
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 6 |
| 14***1D | Washer, Large | 6 |
| 24***01 | Grommet, 6.4 Blind | 6 |
B1-10-1 Chaff Guards
| 13***1Z | Nut, M8 | 1 |
| 14***1Z | Washer, 2 Ba | 10 |
| 24***09 | Grommet | 1 |
B1-2-1 Mounting, Axle
| 13***32 | Bolt, Plain, M24 X 240mm | 8 |
| 13***33 | Bolt, Plain | 4 |
| 13***01 | Nut | 16 |
B2-3-2 Cover, Loader Valve
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***17 | Cover, Valve | 1 |
B2-17-1 Vandal Guards, Instrument Cluster
| 33***59 | Guard, Instrument Panel | 1 |
| 33***48 | Plate, Instument | 1 |
| 33***40 | Plate, Instrument | 1 |
B2-13-1 Consoles, Servo Controls
| 13***5Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 10 |
B2-1-1 Cab Glazing, Tinted
| 82***66 | Glass, Door, Left Side, Tinted | 1 |
| 82***67 | Glass, Door, Right Side, Tinted | 1 |
| 82***68 | Glass, Cab, Lower, Left Side | 1 |
B2-5-1 Servo Control Arm
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***0Z | Bolt, M10 X 40 | 1 |
B2-8-1 Door Stay
| 27***96 | Stay, Door | 2 |
| 27***20 | Pad, Rubber | 2 |
| 81***17 | Spring, Door Stay, Left Hand | 1 |
B2-3-5 Cab Fittings
| 13***3D | Setscrew | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Screw, M6 X 25mm | 4 |
B2-7-1 Door
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
| 12***00 | Lock, Door, Left Hand | 1 |
B2-15-1 Carrier, Warning Triangle
| 12***01 | Strap | 1 |
| 27***00 | Carrier, Warning Triangle | 1 |
| 27***00 | Carrier, Warning Triangle, Black Cab | 1 |
B2-12-1 Guard, Screen
| 13***8Z | Bolt, M10 X 30 | 8 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 14 |
B2-7-3 Door Retainer
| 12***01 | Stop, Bump | 2 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***2Z | Nut | 2 |
B2-6-1 Seat Belt
| 40***93 | Kit, Seat Belt | 1 |
B2-10-1 Mirror, External & Interior
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
B2-4-1 Cab Mountings
| 13***0Z | Bolt, M10 X 40 | 16 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, Lock, M10 | 16 |
B2-9-2 Seat, Suspension 5000lb
| 40***02 | Spring, Tension | 2 |
| 40***03 | Damper | 2 |
| 40***04 | Knob, Damper Adjuster | 1 |
B2-2-2 Canopy Cab Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 12 |
B2-2-1 Cab Assembly, Black Cab, Tinted Glazing
| 12***05 | Bolt, Closing | 2 |
| 13***8Z | Screw, M8x30 | 8 |
| 13***1Z | Nut | 2 |
B2-14-1 Stowage Box, (Optional)
| 13***8Z | Screw, M8x30 | 3 |
| 13***0Z | Bolt | 1 |
| 13***3Z | Nut | 4 |
B2-17-5 Vandal Guard, Instrument Cluster
| 33***90 | Bracket, Vandal Cover, Retainer | 1 |
| 33***81 | Bracket, Stow | 1 |
| 33***59 | Guard, Instrument Panel | 1 |
B2-3-1 Cab Fittings
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 2 |
B2-9-1 Seat, Suspension
| 40***02 | Spring, Tension | 2 |
| 40***03 | Damper | 2 |
| 40***04 | Knob, Damper Adjuster | 1 |
B2-16-1 Visor, Sun
| 14***02 | Screw, No 8x1/2" | 3 |
| 33***72 | Visor, Sun | 1 |
B2-13-2 Consoles, Manual Controls
| 14***5Z | Washer, M5; Replaces 69***59 | 8 |
| 27***44 | Console, Side, Manual | 1 |
| 27***45 | Cover, Access, Fuse Box | 1 |
B2-11-1 Soundproofing, Cab
| 33***35 | Panel, Soundproofing, Parcel Shelf | 1 |
| 33***36 | Panel, Soundproofing, Rear Wall | 1 |
| 33***37 | Panel, Soundproofing, Under Seat | 1 |
B3-3-1 Travel Struts
| 12***00 | Strap | 2 |
| 12***02 | Stop | 1 |
| 12***71 | Stop | 2 |
B3-1-1 Arms, Loader
| 13***8Z | Bolt, M10x80 | 5 |
| 13***9Z | Bolt, M10x90mm | 3 |
| 13***0Z | Bolt, M10 X 100 | 2 |
B3-2-1 Safety Strut, Loader Arms
| 12***00 | Strap | 1 |
| 12***71 | Stop | 2 |
| 13***2D | Nut, Thin | 1 |
B3-4-1 Arms, Loader, Direct Mount
| 13***8D | Setscrew, M16 X 30mm | 2 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
B5-2-3 Labels, Italian
| 81***54 | Label, Outline Sticker L.H. | 1 |
| 81***55 | Label, Outline Sticker R.H. | 1 |
| 81***45 | Label, Warning Italian, Read Operating Book | 1 |
B5-2-4 Labels, Spanish
| 81***48 | Label, Warning Spanish, Read Operating Book | 1 |
| 81***01 | Label, "Fit Cover", Spanish | 1 |
B5-10-1 Fire Extinguisher, 2.5kg
| 14***4Z | Screw, Self Tapping | 2 |
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
B5-3-1 Labels, Noise Level
| 81***64 | Label, Sound Level, 78 Lpa | 1 |
| 81***51 | Decal, Noise, 73 Lpa | 1 |
| 81***23 | Label, Noise, 98 Lwa | 1 |
B5-2-1 Labels, German
| 81***54 | Label, Outline Sticker L.H. | 1 |
| 81***55 | Label, Outline Sticker R.H. | 1 |
| 81***44 | Label, Warning German, Read Operating Book | 1 |
B5-2-7 Labels, Holland, Sweden, Norway, Finland
| 81***40 | Label, Warning Danish, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***42 | Label, Warning Finnish, Read Operating Book | 1 |
B5-11-1 Tool Kit
| 27***00 | Bag, Tool | 1 |
| 27***43 | Bracket, Wheel Brace | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
B5-1-1 Labels
| 81***55 | Label, Diesel | 1 |
| 81***87 | Decal, Tie Down (Chain) | 1 |
| 81***18 | Decal, Forward/Reverse | 1 |
B5-2-2 Labels, French
| 81***43 | Label, Warning French, Read Operating Book | 1 |
| 81***52 | Label, Warning, Fit Cover | 1 |
B6-1-2 Travel Security, Italy
| 12***00 | Strap | 2 |
| 12***71 | Stop | 4 |
| 12***99 | Plate, Hazard Warning | 1 |
B6-1-1 Homologation Package, Italy, Legislatative Reqmnt.
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
B6-2-1 Homologation Package, Germany, Legislatative Reqmnt.
| 14***18 | Guard | 2 |
| 81***66 | Label, Speed Limit, 20kph | 1 |
| 81***37 | Decal, Grease Points | 25 |
C Electrics-Machine, Cab & Engine
C1-3-1 Light, Working, Front
| 33***34 | Bracket | 2 |
| 70***00 | Light, Working | 2 |
| 72***61 | Bulb, 12v-55w H3 | 1 |
C1-12-1 Light, Reversing
| 70***00 | Light, Reversing | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-21-1 Alarm, Reverse
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6D | Washer, M6 Plain | 2 |
C1-6-1 Light, Head, Left Hand Dip, Clear
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 2 |
C1-3-5 Light, Working, Front, Canopy Build
| 13***7D | Screw, M6 X 25mm | 4 |
| 14***6D | Washer, M6 Plain | 4 |
| 14***6Z | Washer, Spring | 4 |
C1-4-1 Light, Working, Cab Rear
| 70***00 | Light, Working | 2 |
| 72***61 | Bulb, 12v-55w H3 | 1 |
C1-5-2 Light, Reversing
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 27***78 | Plate, Mounting | 2 |
C1-11-1 Light, Beacon, Hazard Warning, Amber
| 12***01 | Plate, Beacon Mounting | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***01 | Lens, Amber, 121mm Dia | 1 |
C1-10-2 Battery Isolator
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***3D | Nut, M6 Lock | 1 |
| 14***6D | Washer, M6 Plain | 2 |
C1-1-1 Harnesses
| 13***3Z | Screw, M6x16 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***6Z | Washer, M6 | 4 |
C1-7-1 Light, Head, Right Hand Dip, Clear
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
C1-14-1 Immobiliser, Sales Special
| 34***80 | Kit, Immobiliser Gps; Sales Special 9257 & 8461. For Service Parts Contact The Following : Baumaco. Telephone : 0049 171 339 1432, Kit, Immobiliser Gps, Kit, Immobiliser Gps; Sales Special 8460 & 9256. For Service Parts Contact The Following : Baumaco. Telephone : 0049 171 339 1432 | 1 |
C1-17-1 Switches, Electrical
| 14***11 | Seal, Bonded | 1 |
| 14***12 | Washer, Bonded | 1 |
| 24***05 | O Ring | 1 |
C1-8-1 Light, Rear
| 14***03 | Screw, Self Tapping | 2 |
| 70***00 | Light, Rear Combination; Replaced By 70***26 + 72***13, See San 12320 | 2 |
| 70***01 | Lens | 1 |
C1-1-2 Harnesses, Reverse Fan
| 72***10 | Harness, Reversible Fan | 1 |
| 72***11 | Harness, Reverse Fan, Warning Light | 1 |
| 72***39 | Harness, Reverse Fan, Extension | 1 |
C1-18-1 Kit, Road Travel, Servo Cut Off, Uk
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 1 |
C1-3-2 Light, Working, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 14***6D | Washer, M6 Plain | 4 |
| 14***6Z | Washer, Spring | 4 |
C1-20-1 Horn, Single Tone
| 13***3Z | Screw, M6x16 | 1 |
| 13***3D | Nut, M6 Lock | 1 |
| 14***6Z | Washer, M6 | 1 |
C1-19-1 Light, Indicator, Side
| 13***1Z | Nut, 4ba Plain | 2 |
| 14***9Z | Washer | 2 |
| 70***00 | Flasher, Side, Repeater | 1 |
C1-15-1 Fuel Sender
| 13***1Z | Screw | 6 |
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
| 71***00 | Sender, Fuel | 1 |
C1-22-1 Srs, Harness, Electrical Components
| 13***3Z | Nut | 1 |
| 14***5D | Washer | 1 |
| 25***00 | Valve, Ride Control | 1 |
C1-10-1 Battery
| 10***00 | Clamp | 1 |
| 13***0D | Bolt, M10 X 40mm Long | 4 |
| 14***6D | Washer, M6 Plain | 2 |
C1-5-1 Light, Rear Fog
| 70***00 | Light, Fog | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-9-1 Light, Number Plate, Exhaust Base Mtg
| 33***78 | Bracket, Number Plate | 1 |
| 33***76 | Bracket, Number Plate | 1 |
| 70***00 | Light, Number Plate | 1 |
C1-2-1 Fuses, Primary, Engine Compartment
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 14***6D | Washer, M6 Plain | 2 |
| 33***57 | Bracket, Fuse Link Box | 1 |
C2-1-1 Electrical Equipment
| 70***11 | Sensor, Vacuum - 70mbar | 1 |
| 70***89 | Switch, Water Temperature | 1 |
| 70***90 | Switch, Engine Oil Pressure | 1 |
C2-4-2 Alternator, 100amp, Optional Air Conditioning
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***02 | Rectifier, & S.R.E Bracket | 1 |
| 71***04 | Regulator, Assembly | 1 |
C2-6-1 Circuit, Reversing Fan
| 33***53 | Plate, Clamp | 1 |
| 33***70 | Plate, Micro Switch | 2 |
| 33***61 | Plate, Solenoid | 1 |
C2-4-1 Alternator, 12volt-75amp
| 71***53 | Alternator, 75a-12v | 1 |
C2-2-1 Circuit, Glow Plug
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 4 |
| 13***3Z | Nut | 2 |
C2-5-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***98 | Spacer | 1 |
| 02***53 | Lever, Alternator Adjusting | 1 |
C2-3-1 Motor, Starter, 12volt
| 02***03 | Stud | 3 |
| 02***59 | Nut | 3 |
| 71***31 | Motor, Starter - 12volt | 1 |
C3-13-1 Control Levers, Joysticks
| 25***19 | Button, Push, & Spring | 4 |
| 25***21 | Switch, Sliding | 1 |
| 33***74 | Boss, Joystick | 1 |
C3-5-1 Instrument Cluster
| 27***00 | G.A., Full Inst. Pkge | 1 |
| 27***86 | Plate, Instrument | 1 |
| 27***87 | Plate, Switch | 1 |
C3-8-1 Wash/Wipe, Roof, Sales Special
| 15***00 | Connector, 'T' Piece | 1 |
| 15***01 | Cover, Wiper Motor; San 22420.Pi Md05/093. Cwe To 34***18. | 1 |
| 64***00 | Tube | 0 |
C3-4-1 Wash/Wipe, Rear Screen
| 15***00 | Connector, 'T' Piece | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 53***03 | Valve, Non-Return | 1 |
C3-1-5 Sealed Fuse Box
| 13***3Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-1-1 Fuse Box & Relays
| 13***11 | Capscrew | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 7 |
C3-20-1 Air-Con, Installation
| 13***3Z | Screw; Replaces 69***21 | 1 |
| 13***3Z | Nut | 8 |
| 14***5Z | Washer, M5; Replaces 69***59 | 8 |
C3-3-1 Wash/Wipe, Windscreen
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 14***1Z | Washer, 2 Ba | 2 |
| 15***00 | Connector, 'T' Piece | 1 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-12-1 Warning Light, Cluster
| 70***13 | Bulb, 12v 1.7w | 0 |
| 70***00 | Cluster, Warning Light | 1 |
| 70***00 | Cluster, Warning Lights | 1 |
C3-2-1 Switches, Electrical
| 70***00 | Holder, Warning Light | 1 |
| 70***31 | Decal, Front Working Lights | 1 |
| 70***33 | Decal, Rear Working Lights | 1 |
C3-11-2 Switch, Column
| 11***58 | Gaiter, Column Switch | 1 |
| 70***01 | Clamp | 1 |
| 70***22 | Switch, Column | 1 |
C3-11-1 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 70***00 | Switch, Right Hand, Switch, Right Hand; Syncro And Semi-Auto. Not Powershift. Syncro And Semi-Auto. Not Fitted To Powershift After Machine 63***07 | 1 |
| 70***00 | Switch, Column; Replaced By 70***49, See San 10543 | 1 |
C3-6-1 Heater, Installation
| 13***8Z | Bolt | 2 |
| 13***8Z | Screw, M8x30 | 4 |
| 14***94 | Vent | 4 |
C3-6-2 Heater, Cab
| 27***00 | Heater, Assembly | 1 |
| 33***74 | Cover, Sideplate, Lh | 1 |
| 71***62 | Resistor | 1 |
C3-7-1 Radio Installation
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***6Z | Washer, M6 | 1 |
| 71***00 | Aerial | 1 |
C3-15-1 Face Level Fan, Installation
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
| 14***6Z | Washer, M6 | 4 |
D Controls-Machine, Engine & Steering
D1-2-1 Control Knob, Loader Valve
| 12***59 | Ring, Tolerance | 1 |
| 12***55 | Knob, Base | 1 |
| 12***61 | Knob, Top | 1 |
D1-10-1 Control, Parking Brake
| 13***3D | Screw, M5x16 | 1 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Bolt, M10 X 55 | 2 |
D1-1-1 Controls, Loader Valve, Manual
| 12***01 | Knob | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
D2-1-5 Hand Throttle, Creep Speed
| 13***1D | Screw, M6x45 | 4 |
| 13***1D | Nut, Plain | 4 |
| 14***11 | Seal, Bonded | 4 |
D2-1-1 Control, Throttle
| 13***5D | Setscrew, M6 X 20mm Long | 3 |
| 13***7D | Screw, M6 X 25mm | 3 |
| 13***3D | Nut, M6 Lock | 3 |
D2-2-1 Control, Throttle Pedal
| 13***3Z | Nut | 2 |
| 14***3Z | Washer, Spring | 2 |
| 25***00 | Clamp, Assembly | 1 |
D3-1-3 Steering Column, Fixed
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
D3-2-1 Steering Wheel
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***00 | Wheel, Steering | 1 |
D3-1-1 Steering Column
| 13***7Z | Bolt, M10x25 | 8 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***2Z | Nut | 1 |
E Hydraulics & Air Including, Steering
E1-28-1 Circuit, Industrial Grapple, ( Zetelmeyer Quickhitch )
| 14***11 | Seal, Bonded | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E1-22-1 Circuit, Lift, H.B.C.V.
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 13***4Z | Bolt | 2 |
| 13***7Z | Bolt, M8 X75mm Long | 4 |
E1-6-1 Hose And Pipework, Fan Motor
| 13***21 | Bolt | 2 |
| 13***03 | Nut, M10 Self-Locking | 2 |
| 16***02 | Adapter | 1 |
E1-21-1 Circuit, Lift
| 27***00 | G.A., Loader Hydraulics | 1 |
| 61***00 | Hose | 4 |
| 61***00 | Hose, 3/8bsp X 1375mm | 2 |
E1-25-1 Circuit, Auxiliary, 2nd Service
| 13***2Z | Bolt | 4 |
| 27***97 | Spacer | 4 |
| 27***00 | Pipe, Tower | 1 |
E1-10-1 Hose And Pipework, Hydraulic Tank
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 1 |
| 61***00 | Hose, 3/8"Bsp X 880mm | 1 |
| 61***00 | Hose | 1 |
E1-3-1 Hose And Pipework, Drive Motor
| 13***2Z | Bolt | 8 |
| 13***2Z | Bolt, M16 X 50mm | 4 |
| 14***1Z | Washer, M16 Plain | 7 |
E1-24-1 Circuit, Auxiliary
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
E1-11-1 Hose And Pipework, Smooth Ride System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
E1-7-1 Hose And Pipework, Temp.Regulator
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 63***00 | Hose | 1 |
| 63***50 | Hose | 1 |
E1-11-2 Hose And Pipework, Smooth Ride System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
E1-5-1 Hose And Pipework, Steering
| 61***00 | Hose, 1/4"Bsp 1315mm | 1 |
| 61***00 | Hose, 3/8"Bsp X 1220mm | 1 |
| 61***00 | Hose, 3/8"Bsp 2500mm Long | 1 |
E1-23-1 Circuit, Shovel
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 27***7P | Clamp | 2 |
E1-6-2 Hose And Pipework, Reversing Fan Motor
| 13***3D | Bolt, M10 X130mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 16***02 | Adapter | 1 |
E1-26-1 Circuit, Auxiliary, 2nd Service, Motorspool
| 13***2Z | Bolt | 4 |
| 27***97 | Spacer | 4 |
| 27***00 | Pipe, Tower | 1 |
E1-9-1 Hose And Pipework, Hydraulic Oil Cooler
| 16***10 | Adapter, Includes 'O'Ring | 2 |
| 24***08 | O Ring | 1 |
| 30***37 | Cooler, Combination | 1 |
E1-8-1 Hose And Pipework, Fan Pump
| 02***37 | Gasket | 1 |
| 13***08 | Bolt | 4 |
| 14***7Z | Washer, Spring | 4 |
E1-4-1 Hose And Pipework, Drive Pump
| 13***0Z | Bolt | 8 |
| 13***7Z | Screw | 2 |
| 13***0Z | Screw | 2 |
E1-2-1 Hose And Pipework, Servo Controller
| 14***11 | Seal, Bonded | 8 |
| 16***02 | Adapter, 1/4" Bsp M/M | 8 |
| 16***02 | Adapter | 3 |
E1-29-1 Clamps, Pipe, Machine
| 13***9D | Setscrew | 2 |
| 82***15 | Plate, Cover M6 X 45mm, @ 33mm Crs | 1 |
| 82***16 | Base, Clamp, 25.4mm Hole, M6 X 33mm Crs | 1 |
E1-27-1 Circuit, Industrial Grapple
| 14***11 | Seal, Bonded | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***03 | Adapter, Male/Male | 2 |
E2-6-1 Pump, Gear, Auxilliary, Fitted To Engine
| 02***37 | Gasket | 1 |
| 13***7D | Bolt, M8 X 75mm Long | 1 |
| 13***08 | Bolt | 5 |
E2-2-1 Pump, Transmission, Servicable Parts
| 20***91 | Pump, Transmission; Superseded By 33***01 D.Jackson 01/07/08, San26307 (Advised By V.Malin Bosch Rexroth) | 1 |
| 20***61 | Kit, Seal; Superseded By 20/95***68 D.Jackson 06/08/08 On San26373 ( Request From Andrew Wier ) | 1 |
| 20***16 | Valve, Relief, Boost Pressure | 1 |
E2-4-1 Motor,Drive, Servicable Parts
| 13***0D | Bolt | 4 |
| 14***1D | Washer, M16 | 1 |
| 14***1Z | Washer, Spring; Replaces 60***1r | 4 |
E2-1-1 Pump, Drive/Main
| 13***2D | Setscrew, M16 X 50mm | 2 |
| 20***91 | Pump, Transmission; Superseded By 33***01 D.Jackson 01/07/08, San26307 (Advised By V.Malin Bosch Rexroth) | 1 |
| 20***16 | Pump, 33cc | 1 |
E2-5-1 Motor, Fan Drive
| 20***17 | Washer, Tab | 1 |
| 20***00 | Motor, Hydraulic; Superseded By 20/92***03 Ref James Coleman, E.Mail To Paul Guest,21/3/08 San.25671 Refers | 1 |
| 20***01 | Valve Relief | 1 |
E2-3-1 Drive Coupling
| 13***8Z | Bolt | 4 |
| 14***2Z | Washer | 4 |
| 14***5Z | Washer, Spring - 5/16", Zinc Plated | 4 |
E3-1-7 Valve, Control, 4 Spool, Motorspool, Manual
| 25***20 | Valve, Section | 1 |
| 25***40 | Kit, End Cap | 1 |
| 25***16 | Valve, (Steer) Section | 1 |
E3-4-1 Valve, Section, Auxiliary
| 25***10 | Spacer | 2 |
| 25***12 | Seal | 2 |
| 25***01 | Valve, Auxiliary. Section, Amp Connectors | 1 |
E3-12-2 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***41 | Element, Hydraulic Filter, 5 Micron, 254mm Long | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
E3-3-2 Valve, Section, Manual, With Reset
| 25***00 | Valve, Section, Mag. Detent | 1 |
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***26 | Plate, Seal | 1 |
E3-2-2 Valve Section, Loader Lift Ram, Manual Valve
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 2 |
| 25***01 | Screw | 2 |
E3-15-1 Valve, Joystick, Loader, Right Hand
| 25***25 | Joint, Assembly | 1 |
| 25***28 | Kit, Plunger, C_w Springs | 1 |
| 25***01 | Kit, Service | 1 |
E3-1-3 Valve, Control, Manual
| 25***40 | Kit, End Cap | 1 |
| 25***16 | Valve, (Steer) Section | 1 |
| 25***16 | O Ring | 1 |
E3-20-1 Valve, Auxillary Relief
| 25***00 | Valve, Relief, 241 Bar | 4 |
E3-11-1 Valve Adapters, Steering
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
E3-10-1 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
E3-1-5 Valve, Control, 4 Spool, Motorspool
| 25***20 | Valve, Section | 1 |
| 25***93 | Valve, Servo, 4 Spool, Motor Spool | 1 |
| 25***40 | Kit, End Cap | 1 |
E3-6-1 Valve And Adapters, & Fittings
| 13***3Z | Screw, M6x16 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 3 |
E3-30-1 Lubrication
| 40***03 | Brake, Fluid, 5 Ltr | 1 |
| 40***23 | Fluid, Hydraulic, 25 Litres, Biodegradable, Fluid, Hydraulic, 25 Litres, Biodegradable; See Note 1. Use Up To Maximum Of 40 Degrees Centigrade Ambient Temperature. | 1 |
| 40***24 | Fluid, Hydraulic 205 Litres, Biodegradable | 1 |
E3-1-1 Valve, Control, Loader
| 25***91 | Valve, Servo, 3spool | 1 |
| 25***92 | Valve, Servo, 4 Spool | 1 |
| 25***40 | Kit, End Cap | 1 |
E3-12-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 27***00 | Filter, Hydraulic, Assembly, 10 Micron | 1 |
| 32***00 | Element, Hydraulic Filter, 10 Micron; San 22618.Cwe To 32/92***46.Ref Pi A01/187, P Guest/M Mcarthy. P Gamble 20/09***06 | 1 |
E3-16-1 Valve,Check, Hoseburst, ( Lift Ram )
| 14***08 | Seal, Washer | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***01 | Adapter | 1 |
E3-1-14 Valve, Control, Manual, With Shovel Reset
| 25***20 | Valve, Section | 1 |
| 25***42 | Valve, 3 Spool, With Reset | 1 |
| 25***00 | Valve, Section, Mag. Detent | 1 |
E4-7-2 Rams, Industrial Grapple, 409b
| 90***01 | Cylinder | 1 |
| 90***02 | Rod | 1 |
| 90***03 | Cap | 1 |
E4-6-2 Ram, Sidetip Shovel, 409b
| 90***00 | Ram | 1 |
| 90***01 | Cylinder | 1 |
| 90***02 | Rod, Piston | 1 |
E4-2-2 Ram, Shovel
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***87 | Ram, Shovel Crowd | 2 |
| 55***87 | Cylinder | 1 |
E4-3-1 Ram, Steering
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***73 | Ram, Steering | 1 |
| 55***73 | Cylinder | 1 |
E4-4-1 Ram, Clamshovel, 6 In 1
| 14***01 | Washer, Aluminium | 1 |
| 14***07 | Nipple, Grease, 45 Deg. Angle | 2 |
| 55***16 | Ram, Clamshovel; Replaced By 99***83, See San 13446 | 1 |
E4-10-1 Ram, Lift, Hbcv
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 57***85 | Ram, Lift | 2 |
| 57***85 | Cylinder | 1 |
E4-7-1 Ram, Industrial Grapple
| 90***01 | Cylinder | 1 |
| 90***02 | Rod | 1 |
| 90***03 | Cap | 1 |
E4-2-1 Ram, Shovel
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***13 | Ram, Shovel Crowd; Superseded By 55***87 D.Jackson 13/09/07, San23997 (Pi C00812 Aa) Reduced End Cap | 2 |
| 55***87 | Ram, Shovel Crowd | 2 |
E4-6-1 Ram, Sidetip Shovel
| 90***00 | Ram | 1 |
| 90***01 | Cylinder | 1 |
| 90***02 | Rod, Piston | 1 |
E4-1-1 Lift Ram
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 57***85 | Ram, Lift | 2 |
| 57***85 | Cylinder | 1 |
F Axles, Wheels & Transmission
F1-1-2 Axle Assembly, Front, 448/58100
| 13***0Z | Bolt, M12x40 | 24 |
| 13***5Z | Bolt | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 6 |
F1-4-1 Differential, Components
| 13***9Z | Bolt, M10x90mm | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
F1-2-1 Axle Assembly, Front, Limited Slip Diff. ,448/31100 448/58090
| 13***0Z | Bolt, M12x40 | 24 |
| 13***5Z | Bolt | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 8 |
F1-5-1 Differential, Assembly, Limited Slip
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
F1-3-1 Differential, Assembly
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
F1-1-1 Axle Assembly, Front, 448/31300 448/58100
| 13***0Z | Bolt, M12x40 | 24 |
| 13***5Z | Bolt | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 8 |
F1-6-1 Differential, Components, Limited Slip
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F2-1-1 Axle Assembly, Rear
| 13***0Z | Bolt, M12x40 | 24 |
| 13***5Z | Bolt | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 8 |
F2-5-1 Gearbox, Transfer, L.Slip, Complete With Differential Assembly
| 13***4Z | Bolt, M10x60 | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***0Z | Bolt, M10 X 100 | 1 |
F2-6-1 Differential, Components, Limited Slip
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F2-4-1 Differential, Components
| 13***9Z | Bolt, M10x90mm | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
F2-2-1 Axle Assembly, Rear, L.Slip Differential 448/57410 448/58130
| 13***0Z | Bolt, M12x40 | 24 |
| 13***5Z | Bolt | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 8 |
F2-3-1 Gearbox, Transfer, Complete With Differential Assembly
| 13***4Z | Bolt, M10x60 | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 8 |
| 13***0Z | Bolt, M10 X 100 | 1 |
F3-5-3 Wheels & Tyres, 11.00 X 20, Sales Special
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W11x20 | 1 |
F3-1-1 Wheels & Tyres, 12.5 X 18
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, Assembly,, 12.5x18 | 4 |
F3-5-2 Wheels & Tyres, 11.0 X 20
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, And Tyre Assembly, 365/80 R20 | 1 |
F3-9-1 Wheel & Tyres, 14 X 20, Sales Special
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 41***28 | Wheel, 14 X 20 | 1 |
F3-5-1 Wheels & Tyres, 11.0 X 20
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, And Tyre Assembly, Dunlop 335/80 R20 | 4 |
F3-4-1 Wheels & Tyres, 335/80 Xm27, Michelin
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, Assembly, 33***18 Michelin | 4 |
F3-3-1 Wheels & Tyres, 14.5 X 20
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, Assembly, 14.5x20 | 4 |
F3-7-1 Wheels & Tyres, 335/80 R18 Xzsl, Michelin
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***67 | Wheel, And Tyre Assembly, 33***18 Xzsl | 4 |
F3-12-1 Wheels & Tyres, 12.5 R18 Xm37, Michelin
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***85 | Wheel, Assembly, Michelin, 12.5 R18 Xm 37 | 4 |
F3-1-2 Wheels & Tyres, 12.5 X 20
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, Assembly, 12.5x20 | 4 |
F3-8-1 Wheels And Tyres, Foam-Filled, Sales Special
| 10***01 | Nut | 6 |
| 33***73 | Wheel, Assembly, Foam-Filled | 4 |
| 41***00 | Wheel, W11x20 | 1 |
F3-2-1 Wheels & Tyres, 405/70 R20 Michelin
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 27***00 | Wheel, Assembly, 405/70, R20 | 4 |
F3-2-2 Wheels & Tyres, 405/70 R20 Dunlop, Sales Special
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***75 | Wheel, & Tyre Assembly, Dunlop 405/70 R20 | 4 |
F3-6-1 Wheels & Tyres, 375/75r20 Mich. Xzsl
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***55 | Wheel, And Tyre Assembly, Mich 37***20 Xzsl | 4 |
F3-11-1 Wheels & Tyres, 12.5 X 20, Dunlop Tg32
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, W11x20 | 2 |
F3-4-2 Wheels & Tyres, 340/80 R18 Xmcl, Michelin
| 10***01 | Nut | 6 |
| 15***01 | Valve | 1 |
| 33***94 | Wheel, Assembly,340/80 R18, Michelin Xmcl | 4 |
F3-10-1 Propshaft, Transmission
| 13***03 | Nut, M10 Self-Locking | 16 |
| 14***03 | Nipple, Grease | 2 |
| 45***00 | Propshaft | 1 |
G Brakes
G1-1-1 Brake Pedal, & Master Cylinder
| 13***0D | Setscrew | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 1 |
G1-4-1 Brake Caliper, Parking, Components
| 15***87 | Pad, Brake, Right Hand, Cam Side; Replaced By 15/92***03 | 1 |
| 15***88 | Pad, Brake, Left Hand, Carrier Side; Replaced By 15/92***03 | 1 |
| 15***03 | Kit-Pad, Brake Pad | 1 |
G1-2-1 Brake, System
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
G1-3-1 Brake Caliper
| 15***11 | Caliper, Brake 60mm, Mineral Fluid Eurotubi | 1 |
| 33***86 | Kit-Seal, C/W Bolts | 1 |
| 47***08 | Nipple, Grease | 1 |
G1-4-2 Brake Caliper, Parking, Components
| 15***03 | Kit-Pad, Brake Pad | 1 |
| 15***78 | Brake, Caliper | 1 |
| 15***89 | Kit-Bolt, Torx Head | 1 |
R Engine 1104c-44 Re Build, Tier 2 Emissions
R1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Re Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 2 |
R1-1-1 Engine, Complete, Re Build, 75bhp
| 01***44 | Engine, Complete 1104c-44, Nat/Aspirated, 75bhp | 1 |
R1-5-1 Fans, Pulleys, & Fan Belt, Re Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***21 | Pulley, Crankshaft, Single Groove | 1 |
R1-3-1 Block Assembly, Re Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***34 | Plug | 1 |
R1-2-1 Engine Short, Re Build
| 02***02 | Engine, Short | 1 |
R1-7-1 Flywheel, & Starter Ring Gear, Re Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***70 | Dowel | 2 |
R1-8-1 Engine Mountings
| 12***02 | Plate, Compression | 4 |
| 13***7Z | Bolt, M10x25 | 16 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
R1-6-1 Timing Case, Camshaft & Gears, Re Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
R2-5-1 Cover, Cylinder Head, Re Build
| 02***77 | Cover | 1 |
| 02***10 | Bolt | 3 |
R2-7-1 Heater Plugs, & Pick-Up Sensor
| 71***73 | Sensor, Cold Start | 1 |
| 71***66 | Connector, Bar Thermostart | 1 |
| 71***72 | Thermostart | 4 |
R2-6-1 Lifting Plates, Engine, Re Build
| 02***63 | Bracket, Engine Lifting | 1 |
| 33***76 | Bracket, Engine Lifting | 1 |
| 82***01 | Screw | 2 |
R2-4-1 Breather, Engine Oil, Re Build
| 02***64 | Screw | 2 |
| 02***73 | O Ring | 1 |
| 02***74 | Seal | 1 |
R2-1-1 Cylinder Head, Re Build
| 02***95 | Plug, Taper | 1 |
| 02***07 | Plug, Core, D=50mm | 2 |
| 02***34 | Plug | 4 |
R2-3-1 Rocker Cover, Re Build
| 02***64 | Screw | 10 |
| 02***65 | Cover, Rocker | 1 |
| 02***66 | Gasket, Rocker Cover | 1 |
R2-2-1 Rocker Assembly, Push Rods & Tappets, Re Builds
| 02***43 | Rod, Push | 8 |
| 02***03 | Nut, Lock | 2 |
| 02***96 | Tappet | 8 |
R3-1-1 Manifold, Induction, Re Build
| 02***36 | Gasket | 2 |
| 02***39 | Plate | 2 |
| 02***19 | Screw | 2 |
R3-3-2 Pre-Cleaner
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
R3-4-1 Silencer
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***8D | Capscrew, M10x30 | 4 |
R3-2-1 Manifold, Exhaust, Re Build
| 02***17 | Gasket, Exhaust Manifold | 1 |
| 02***29 | Manifold | 1 |
| 02***52 | Screw | 8 |
R3-3-3 Induction Assembly, Blue Angel
| 13***5D | Setscrew, M8x20 | 2 |
| 14***7D | Washer, M8 Plain | 2 |
| 22***15 | Clip, Jubilee | 2 |
R3-3-1 Filter, Air
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
R4-3-2 Reverse Fan, Fittings & Mountings, 20kph & 30kph
| 21***09 | Pin, Tension | 1 |
| 26***43 | Bearing, Oilite | 2 |
| 27***40 | G.A. | 1 |
R4-4-1 Radiator & Hoses
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 13***3D | Setscrew | 1 |
| 13***7D | Screw, M6 X 25mm | 2 |
R4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Bolt | 4 |
| 13***5D | Setscrew, M6 X 20mm Long | 11 |
| 13***7Z | Bolt, M10x25 | 3 |
R4-1-1 Pump, Water, Re Build
| 02***80 | Pump, Water Assembly | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
| 02***78 | Gasket, W/Pump To T/Case | 1 |
R4-2-1 Thermostat, Housing, Inlet & Outlet, Re Builds
| 02***57 | Adapter | 1 |
| 02***74 | Connector, Water Outlet, Assembly | 1 |
| 02***75 | Thermostat | 1 |
R4-5-1 Combination Cooler, Standard
| 13***6D | Screw, M8x20 | 6 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***7D | Washer, M8 Plain | 12 |
R4-5-2 Combination Cooler, Wide Core, Optional
| 13***6D | Screw, M8x20 | 6 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***7D | Washer, M8 Plain | 12 |
R5-2-1 Pump, Oil
| 02***85 | Pump, Oil | 1 |
| 02***18 | Screw | 5 |
R5-5-1 Cooler, Oil, Re Build
| 02***02 | Gasket, Oil Cooler To Block | 1 |
| 02***03 | Gasket | 2 |
| 02***05 | Cooler, Oil | 1 |
R5-4-1 Filter, Oil, & Oil Feed Adapter, Re Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***16 | Connector | 1 |
| 02***31 | Gasket, Oil Filter Head, To Cyl/Block | 1 |
R5-1-1 Sump, Oil, D Fittings, Re Build
| 02***82 | Plug, Oil Drain | 1 |
| 02***98 | O Ring | 1 |
| 02***03 | Olive | 1 |
R6-3-2 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-11-3 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-1-2 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-11-1 Pump, Fuel Injection, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-1-1 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-6-1 Filter, Fuel Sediment
| 32***71 | Element, Fuel Sediment Filter | 1 |
| 32***73 | Plug, Drain Assembly | 1 |
| 32***81 | Screw, Bleed | 1 |
R6-7-1 Pump, Fuel Lift, & Filter Assembly
| 02***32 | Washer | 2 |
| 02***80 | Screw, M6x40mm | 2 |
| 17***00 | Pump, Electric Fuel Lift, Filter Assembly | 1 |
R6-2-1 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***44 | Clip | 2 |
| 02***45 | Clip | 1 |
R6-11-2 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-4-1 Fuel Pipes, Fuel Tank To Filter, Re Build
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
R6-3-1 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-2-2 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***30 | Hose, Fuel Leak-Off | 3 |
| 02***35 | Cap, Blanking | 1 |
R7-5-1 Compressor, Installation, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***35 | Bolt, 3/8"Unf X 5.1/4" | 1 |
| 13***2D | Bolt | 1 |
R7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
R7-7-2 Heater, Engine Block
| 12***46 | Bracket, Mounting | 1 |
| 13***8D | Bolt, M6 X 30 | 2 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
R8-2-1 Gasket Set, Bottom, Re Build
| 02***17 | Kit-Gasket, Bottom | 1 |
R8-1-1 Gasket Set, Top, Re Build
| 02***80 | Kit-Gasket, Top | 1 |
408ZX serial number reference
Locate the machine identification plate on the right-hand side of the loader tower or cab frame. Record the full serial number and engine serial number for accurate parts identification. Verify applicability with a JCB dealer using the full serial number.
| Prefix | Identifies | Notes |
|---|---|---|
| 00757100-00757999 | JCB 408ZX Wheeled Loader parts catalog applicability |
Frequently asked questions
What engine does the JCB 408ZX use?
The JCB 408ZX uses a Perkins 1104C-44 naturally aspirated 4-cylinder diesel engine producing 75 hp (55.9 kW).
What is the operating weight of the JCB 408ZX?
The operating weight is 4,839.8 kg (10,670 lbs), varying slightly by configuration and tire size.
What model replaced the JCB 408ZX?
The JCB 408ZX was succeeded by the JCB 409ZX and 411ZX series in the compact wheel loader lineup.
What 408ZX owners discuss
What powertrain behavior is reported when hydraulic oil reaches high temperatures in the JCB 408ZX?
The machine exhibits slow travel speeds, described as moving at a "turtle pace," when the hydraulic oil temperature rises during summer operation. This is attributed to the viscosity of L-HV 46 oil used in the system.
What is the typical cause of oil leakage from the filler cap area on the JCB 408ZX?
Oil leakage from under the filler cap is often caused by blocked breather vents in the cap itself. Even if the vents appear clear, they may be obstructed, preventing proper pressure equalization.
What engine generation issues are common on JCB 444 engines found in this machine class?
Early Dieselmax engines (Tier 2 and early Tier 3) are prone to big end bearing failures on the crankshaft and fuel injection pump faults. Later Tier 4i and T4 Final EcoMax engines tend to suffer from injector faults and sensitivity to fuel quality. Worn piston rings are also a common cause of power loss and heavy breathing in high-hour units.
What are common electrical or sensor-related causes for starting difficulties or power loss?
Starting problems are frequently caused by low battery voltage (below 12.4V for 12V systems), corroded terminals, or poor earth strap connections. Power loss can result from control module malfunctions, faulty glow plug relays/timers affecting cold starts, or air leaks in the fuel suction lines causing the engine to fire briefly then die.
What undercarriage or wear patterns are typical for JCB wheel loaders and backhoes?
Operators report that JCB machines can experience intermittent movement issues, often linked to electrical faults in the forward/reverse microswitches that activate hydraulic solenoids on the transmission body. Hydraulic hose failures are also noted as a recurring issue, sometimes due to crimping quality or regenerative pressure spikes.
What engine and filtration issues arise in dusty operating environments?
In dusty conditions, standard air filtration can be overwhelmed, leading to high oil consumption and accelerated piston ring and bore wear. Operators recommend fitting a cyclone pre-filter ahead of the standard air filter to remove heavy dust particles and extend engine life.
What should be checked when buying a used JCB 408ZX?
Verify the engine generation (Dieselmax vs. EcoMax) to anticipate bearing or injector issues. Check for oil leaks around the filler cap and breather vents. Inspect the forward/reverse microswitches and solenoids for intermittent movement faults. Ensure the hydraulic oil viscosity is appropriate for the climate and check for signs of poor maintenance, such as coolant contamination or excessive crankcase breathing.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 408ZX. Related factory variants of the same model family:
408ZX
Need a specific 408ZX part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.