JCBagriculturalwheeled loaders
Jcb 408
Maintenance schedule, common problems & OEM parts breakdown
The JCB 408 is a compact wheel loader designed for utility, agricultural, and light construction applications. It is powered by a naturally aspirated 4-cylinder Perkins 1104C-44 engine displacing 4401.6 cc (268.6 cu in), producing 75 hp (55.9 kW) gross power. The machine weighs approximately 4839.8 kg (10670 lbs) in standard configuration, with operating weight varying by attachment and tire setup. Production spans multiple decades, with the 408 succeeding earlier JCB loader lines and preceding the modern 409 series. Configurations include standard and high-tooling booms, with bucket capacities ranging from 0.7 m³ (struck) to 0.8 m³ (heaped).
Across its production life, the 408 evolved from early Perkins-powered models to later iterations featuring updated hydraulic systems and emissions-compliant engines. The machine remains significant in the used and parts market due to its simple, robust hydrostatic transmission and widely available Perkins engine components. Its compact footprint and 12.5 mph (20.1 km/h) travel speed make it a staple for rental fleets and municipal maintenance crews. The 408 shares many structural and hydraulic components with the 406, 407, and 409 models, ensuring high parts interchangeability and sustained dealer support for older units.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 408 specifications
Engine
| Model | Perkins 1004.4LR2 (408 B); Perkins 1104C-44 (408ZX) |
| Gross Power | 47 kW (63 hp) (408 B); 75 hp (55.9 kW) (408ZX) |
| Net Power | 43 kW (58 hp) (408 PS); 47 kW (63 hp) (408 B) |
| Displacement | 4.4 L (268.6 cu in. / 4401.6 cc) |
| Cylinders | 4 |
| Emissions Tier | Not documented for these specific serial ranges — verify with your dealer |
Weights
| Operating Weight | 4.7 t (10,362 lbs) (408 B); 4.7 t (10,362 lbs) (408 ZX); 5.1 t (11,244 lbs) (408 PS); 10,670 lbs (4,839.8 kg) (408ZX); 11,309 lbs (5,129 kg) (standard 408) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 5.13 m (192 in.) (408 B); 5 m (16.4 ft) (408 ZX); 4.88 m (192 in.) (408ZX) |
| Transport Width | 1.95 m (6.4 ft) (408 B); 1.71 m (5.6 ft) (408 ZX); 1.91 m (75 in.) (408ZX) |
| Transport Height | 2.51 m (8.2 ft) (408 B); 2.64 m (8.7 ft) (408 ZX); 2.74 m (108 in.) (408ZX) |
| Wheelbase | 2.13 m (84 in.) (408ZX) |
| Ground Clearance | 30.5 cm (12 in.) (408ZX) |
| Turning Radius | 3.96 m (156 in.) (408ZX) |
Performance
| Travel Speed | 20.1 km/h (12.5 mph) (408ZX); 20 km/h (12.4 mph) (408 ZX) |
| Tipping Load | 3,388.3 kg (7,470 lbs) (408ZX) |
| Bucket Capacity (Heaped) | 0.8 m³ (1.1 cu yds) (408 B, 408 PS, 408 ZX, 408ZX) |
| Bucket Capacity (Struck) | 0.7 m³ (0.9 cu yds) (408ZX) |
| Breakout Force | 4,254.7 kg (9,380 lbs) (408ZX) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 100.3 L (26.5 gal) |
| Hydraulic System | 85.2 L (22.5 gal) |
| Engine Oil | 9.5 L (2.5 gal) |
| Cooling System | 15.5 L (4.1 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
408 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 9.5 l (2.5 gal) | JCB 15W/40 Multigrade SAE 15W/40, MIL-L-46152B, API CD/SE, MIL-L-2104 (-10 °C to 50 °C / 14 °F to 122 °C); JCB Super Universal Agricultural SAE 10W/30, MIL-L-2105, MIL-L-46152 (-15 °C to 30 °C / 5 °F to 86 °F), API CD/SE, MIL-L-2104C |
| Cooling system | 15.5 l (4.1 gal) | JCB Universal Antifreeze/water ASTM D3306-74 |
| Fuel tank | 100.3 l (26.5 gal) | Diesel Oil |
| Transmission | Not documented for JCB 408 | Not documented for JCB 408 |
| Final drives | Not documented for JCB 408 | Not documented for JCB 408 |
| Hydraulic system AND tank | 85.2 l (22.5 gal) | JCB Genuine Hydraulic Oil |
| Axles/differentials | Front: 9.8 l (2.6 gal); Rear: 10.6 l (2.8 gal) | JCB Special Gear Oil ESEN-M2C 86A/B |
| Grease | Not documented for JCB 408 | JCB Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 408 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 408 beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid samples at the 500-hour service are critical for the JCB 408. Sample engine oil, hydraulic fluid, and axle differentials simultaneously to establish wear trends. The Perkins 1104C-44 engine relies on clean fuel; monitor primary and secondary fuel filter restriction indicators closely. Hydraulic system relief pressure is set to 22.0 bar (319 psi); deviations indicate pump wear or valve issues. Track hydraulic oil contamination levels, as the ISO 46 fluid is sensitive to particulate ingress through damaged cylinder rods or hose fittings.
Corrective & Common Repairs
The JCB 408 hydrostatic transmission uses JCB Special Transmission Fluid meeting Ford ESN-M2C 33G specifications. Overheating or loss of power often stems from clogged transmission filters or degraded fluid. The 1104C-44 engine is naturally aspirated; check turbocharger boot integrity and charge cooler connections if power drops. Axle differentials require 16 liters of JCB Special Gear Oil (Ford ESE-M2C 86B). Inspect front and rear axle hubs for seal leaks, which are common failure points in high-dust environments. Replace brake discs if wear exceeds limits to maintain stopping power.
Overhaul & Rebuild Points
The 2000-hour service mandates a full hydraulic oil change and tank cleaning to prevent valve stiction. Inspect the loader arm and chassis frame for fatigue cracks, particularly at weld joints and pivot points. The Perkins 1104C-44 engine does not require a running-in period for new engines but demands immediate oil changes after the first 100 hours. Check alternator and starter load during the 1000-hour service to preempt electrical failures. Inspect all fluoroelastomeric seals for heat damage, as decomposition can produce corrosive acids requiring careful handling.
Seasonal & Environment Servicing
In temperatures below -10°C (14°F), use JCB 15W/40 Multigrade engine oil to ensure proper lubrication. Above 38°C (100°F), switch to JCB High Performance Hydraulic Fluid ISO 46 to maintain viscosity. The cooling system holds 15.5 liters (3.5 UK gal) of coolant; verify ASTM D3306-74 compatibility to prevent corrosion. In dusty environments, inspect the air filter restriction indicator more frequently than the standard schedule. Ensure the hydraulic tank breather is clean to prevent vacuum lock during cold starts or pressure spikes during heavy loading.
408 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/401102 | Kit-Element, Fuel Filter, Short | Fuel system service | Check fitment → |
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 02/130155 | Pipe, Assembly, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/130158 | Pipe, Assembly, Fuel, Filter To Heater | Fuel system service | Check fitment → |
| 02/130160 | Pipe, Fuel, L/Off Rail To Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
408 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel Rail/System Pressure Too Low | Clogged fuel filters, failing lift pump, or restricted fuel line. | Inspect and replace fuel filters; check fuel pump operation and line integrity. |
| P0117 | Engine Coolant Temperature Sensor Circuit Low Voltage | Faulty coolant temperature sensor, shorted wiring harness, or poor ground connection. | Check sensor resistance and wiring continuity; verify ground points. |
| P0521 | Engine Oil Pressure Sensor Range/Performance Issue | Faulty oil pressure sensor, low oil level, or sensor circuit malfunction. | Verify oil level; test sensor output and wiring for shorts or opens. |
| P2047 | Reductant (DEF/AdBlue) Injector Circuit Open | SCR system fault, open injector circuit, or clogged doser pump. | Inspect DEF injector wiring and connections; check for AdBlue contamination or blockage. |
| U0100 | Lost Communication with Engine Control Module (ECM) | CAN bus network fault, damaged harness, or poor ECU ground. | Check battery voltage and ground straps; inspect CAN bus wiring for damage. |
| 101 | Low Transmission Clutch Pressure Detected | Hydraulic system issue, low transmission fluid, or faulty pressure sensor. | Check transmission fluid level and condition; inspect hydraulic lines for leaks. |
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Failed crank sensor, damaged wiring, or debris on sensor tip. | Inspect sensor and connector; check wiring harness for damage; verify sensor gap. |
| P0001 | Fuel Volume Regulator Control Circuit Open | Open circuit in fuel volume regulator wiring or faulty regulator solenoid. | Check wiring harness for breaks; test regulator solenoid resistance. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
408 attachments & work tools
Buckets
Standard shovel buckets are offered in capacities ranging from 0.65 m³ (0.85 cu yd) to 0.8 m³ (1.1 cu yd), with specific configurations noted for the 408 PS and 408 ZX series. Heavy-duty and grading variants are available to improve material retention and clean release, while tapered ditching buckets are listed for specialized excavation tasks.
Quick Couplers
Both mechanical and hydraulic quick hitch systems are available to allow rapid switching between buckets, forks, and breakers. The hydraulic option is specified for models such as the 408 BZX and 35Z-1, enabling operators to change tools within minutes without leaving the cab.
Breakers
OEM hydraulic breakers are designed to work with the machine's hydraulic system, which operates at a relief pressure of 22.0 bar (319 psi). These attachments are intended for demolition and concrete breaking, requiring compatible hydraulic flow and pressure settings to function correctly.
Forks
Pallet forks are included in the attachment range to enhance material handling versatility. They attach via the standard coupler system, allowing the wheel loader to perform tasks typically requiring a forklift.
Specialist Attachments
The range includes tilt rotators for multi-directional movement and specialist grabs for handling loose materials. These tools connect to the machine's hydraulic system to provide additional control and functionality for complex job site conditions.
All 408 assemblies by section
Every catalogued assembly group for the Jcb 408. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-1 Shovel, 0.8cu.M. 2000mm Wide, For Teeth Adaption
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***01 | Nut | 12 |
| 26***00 | Guard, Tooth | 1 |
A1-3-2 Shovel, Clam, 6 In 1
| 12***26 | Bush | 2 |
| 13***5Z | Bolt | 6 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A1-3-3 Shovel, Clam, 6 In 1, 0.5cu.M., 1750mm (5'9") Wide
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
A1-2-5 Toeplate, Bolt-On, 1950mm (6'4") Wide
| 13***1Z | Nut | 15 |
| 14***2Z | Washer | 15 |
| 51***01 | Toeplate, 1950mm Wide, 15 Hole | 1 |
A1-2-2 Shovel, 0.6cu.M. 1750mm Wide, For Teeth Adaption
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 2 |
| 13***01 | Nut | 12 |
| 26***00 | Guard, Tooth | 1 |
A1-2-4 Toeplate, Bolt-On, 1750mm (5'9") Wide
| 13***1Z | Nut | 13 |
| 14***2Z | Washer | 13 |
| 51***01 | Toeplate, 1750mm Wide, 13 Hole | 1 |
A1-3-1 Shovel, Clam, 6 In 1
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 51***00 | Shovel, Assembly; Use Either 51***00 0.5cu M 1750mm, Or 511/5, 3400 0.7cu M 1950mm Use Std. Jcb Teeth If Req | 1 |
| 51***01 | Tooth | 0 |
A1-2-3 Shovel, 0.6cu.M. 1750mm Wide, For Teeth Adaption
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 2 |
| 13***01 | Nut | 14 |
| 26***00 | Guard, Tooth | 1 |
A1-2-1 Shovel, 0.6cu.M. 1220mm Wide, For Teeth Adaption
| 13***01 | Nut | 12 |
| 51***07 | Guide, Curved | 3 |
| 51***08 | Guide, Flat | 2 |
A1-1-1 Shovel, 0.6cu.M., 1220mm (4'0") Wide
| 51***00 | Shovel | 1 |
| 51***06 | Plate, Toe | 1 |
| 51***07 | Guide, Curved | 3 |
A1-3-4 Shovel, Clam, 6 In 1, 0.7cu.M., 1950mm (6'4") Wide
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 10 |
A1-5-1 Guard, Tooth
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***1Z | Nut | 2 |
| 14***9Z | Washer | 2 |
A2-5-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A2-1-5 Guard, Hose
| 13***3Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 26***00 | Guard, Quickhitch Hose | 1 |
A2-10-1 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 98***00 | Fork, Round Bale | 1 |
A2-8-1 Crane Hook, & Mounting
| 99***00 | Attachment, Crane | 1 |
A2-7-1 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A2-6-1 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A2-4-1 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A2-1-3 Quickhitch
| 13***7Z | Bolt, M16 X 75mm | 2 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***3Z | Nut, M16 | 4 |
A2-1-2 Quickhitch
| 13***7Z | Bolt, M16 X 75mm | 2 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***3Z | Nut, M16 | 4 |
A2-3-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A2-2-1 Fork & Frame, Pallet
| 51***00 | Fork, Frame, Assembly | 1 |
| 51***01 | Frame | 1 |
| 51***02 | Lever, Assembly | 2 |
A2-11-1 Bucket, Grain
| 98***00 | Shovel, Grain/Potatoe, 1750mm Wide | 1 |
A2-2-2 Fork & Frame, Pallet
| 13***7Z | Bolt, M10x25 | 8 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
| 54***00 | Fork, Industrial, 100w X 45t X 1200l | 1 |
A2-9-1 Fork, Manure & Silage
| 98***00 | Grab, Manure/Silage | 1 |
| 98***01 | Fork, Tine | 0 |
| 98***05 | Pin | 2 |
A2-1-1 Quickhitch
| 13***17 | Bolt | 2 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***21 | Bolt | 2 |
B Bodywork,Cab,Loader End, Refurbishments
B1-8-3 Console
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-4-4 Safety Strut
| 15***00 | Bolt | 1 |
| 26***00 | Strut, Safety, Arms Raised | 1 |
| 82***11 | Strip, Edging | 2 |
B1-11-3 Mounting, Front Lights
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 24***09 | Grommet | 4 |
B1-14-2 Soundproofing, 'Q' Build
| 26***03 | Panel, Soundproofing, Engine Cover | 1 |
| 26***01 | Panel, Soundproofing | 2 |
| 26***02 | Panel, Soundproofing | 1 |
B1-4-5 Kit, Loader Arms
| 26***01 | Boss, Eye End, Loader Arms | 2 |
| 26***02 | Bar, Alignment | 1 |
| 80***03 | Bush | 2 |
B1-7-3 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-13-3 Guard, Propshaft
| 13***9Z | Screw, M10x35mm | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 6 |
B1-2-3 Chassis Rear
| 13***8Z | Screw, M6 X 30mm Long | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-9-3 Fenders, Front & Rear, Jcb Axle
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 18 |
| 13***9Z | Screw, M10x35mm | 8 |
B1-7-4 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-12-2 Soundproofing, Engine Cover
| 26***02 | Panel, Soundproof | 2 |
| 26***03 | Panel, Soundproof | 2 |
| 26***07 | Panel, Soundproof | 1 |
B1-10-1 Remote Greasing
| 10***01 | Adapter | 2 |
| 13***1Z | Nut | 2 |
| 14***08 | Seal, Washer | 2 |
B1-5-3 Cover, Engine, Metal
| 13***8Z | Bolt | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-9-4 Fenders, Front & Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 18 |
| 13***9Z | Screw, M10x35mm | 8 |
B1-11-1 Mounting, Front Lights
| 13***8Z | Bolt | 6 |
| 13***3Z | Nut | 6 |
| 26***00 | Bracket, Left Hand, Light Mounting | 1 |
B1-9-1 Fenders, Front & Rear
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 12 |
| 13***2Z | Bolt | 8 |
| 13***6Z | Bolt | 2 |
B1-3-1 Centre Pivot, See Technial Info. Bulletin Tsdb 382
| 13***30 | Bolt, 3/4"Unf X 4" | 2 |
| 13***07 | Bolt, M8 X 25 | 4 |
| 13***0Z | Bolt, M20 X 100mm | 3 |
B1-7-2 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-8-4 Guards, Console, Heaterless Cabs
| 12***43 | Lug | 1 |
| 12***71 | Padlock | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B1-13-2 Guard, Propshaft
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-2-2 Chassis Rear, Jcb Axles
| 13***8Z | Screw, M6 X 30mm Long | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-2-1 Chassis Rear
| 13***14 | Bolt | 2 |
| 13***12 | Bolt | 2 |
| 13***14 | Bolt | 2 |
B1-11-2 Mounting, Front Lights
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 14***5Z | Washer, Spring - 5/16", Zinc Plated | 4 |
| 24***09 | Grommet | 4 |
B1-4-1 Arms, Loader, & Linkage
| 10***18 | Pin, Pivot | 1 |
| 10***16 | Pin, Pivot | 3 |
| 10***18 | Pin, Pivot | 1 |
B1-13-1 Guards, Propshaft
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
B1-4-2 Arms, Loader, & Linkage
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
B1-9-2 Fenders, Front
| 13***2Z | Bolt | 4 |
| 13***6Z | Bolt | 8 |
| 13***3Z | Nut | 16 |
B1-5-2 Cover, Engine, Metal
| 13***2Z | Bolt | 4 |
| 13***4Z | Bolt, 3/8" | 4 |
| 13***2Z | Bolt | 2 |
B1-7-6 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-8-1 Console
| 13***6Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut | 11 |
B1-5-4 Cover, Engine, Metal
| 13***8Z | Bolt | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-12-1 Soundproofing, Engine Cover, Metal
| 26***01 | Panel, Soundproof | 1 |
| 26***02 | Panel, Soundproof | 2 |
| 26***03 | Panel, Soundproof | 2 |
B1-7-1 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-4-3 Arms, Loader, & Linkage
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
B1-3-2 Centre Pivot, See Tsdb 382
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M20 X 100mm | 3 |
| 14***01 | Nipple, Grease, 90deg. Angle | 4 |
B1-6-2 Tank, Diesel Fuel
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 6 |
| 14***5Z | Washer, Spring, M5 | 6 |
| 26***00 | Cap, Filler, With Chain | 1 |
B1-9-5 Fenders, Front & Rear, Hurth Axle
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 18 |
| 13***9Z | Screw, M10x35mm | 8 |
B1-1-2 Chassis Front
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt, M24 X 240mm Long | 4 |
B1-8-2 Console
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-6-1 Tank, Diesel Fuel
| 12***00 | Cap, Filler, C/W Padlock Lug | 1 |
| 26***01 | Sender | 1 |
| 26***00 | Tank, Fuel | 1 |
B1-14-1 Soundproofing, 'Q' Build
| 26***01 | Panel, Soundproofing, Engine Cover | 1 |
| 26***02 | Panel, Soundproofing, Engine Cover | 1 |
| 26***01 | Panel, Soundproofing | 2 |
B1-1-1 Chassis Front
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 2 |
| 13***48 | Bolt | 4 |
B1-7-5 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-5-1 Cover, Engine, Fibre Glass
| 10***03 | Wire, Retaining | 2 |
| 12***01 | Bracket | 2 |
| 12***00 | Latch, Claw | 1 |
B2-2-7 Latch, Door, Kit
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 21***00 | Kit-Latch, Door Retainer | 2 |
| 82***16 | Spacer, Door Catch | 2 |
B2-2-6 Door, Metal Frame, Two Piece Glass
| 12***08 | Bush, Hinge | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
B2-3-1 Cab Glazing
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 12***01 | Washer | 1 |
| 12***02 | Stop, Window, 65mm Long | 1 |
B2-1-7 Canopy
| 12***02 | Plate, Compression | 2 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***5Z | Bolt | 19 |
B2-2-2 Door, Metal Frame, One Piece Glass
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
| 12***00 | Lock, Door, Left Hand | 1 |
B2-1-4 Soundproofing, Cab
| 26***01 | Panel, Soundproofing | 1 |
| 26***02 | Panel, Soundproofing | 1 |
| 26***01 | Panel, Soundproof, L.H. Side | 1 |
B2-1-6 Cab
| 12***02 | Plate, Compression | 6 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***05 | Bolt, Closing | 2 |
B2-2-5 Door, Rear Side, Left & Right Hand, Catch Assembly
| 12***08 | Bush, Hinge | 4 |
| 13***3Z | Nut | 4 |
| 26***05 | Latch, Window, Lower Link | 2 |
B2-6-1 Mirror, Cab Mounted, Exterior
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
| 14***3Z | Washer | 8 |
B2-3-3 Cab Glazing, Two Piece Door
| 26***04 | Clamp | 8 |
| 26***01 | Glazing, Rubber, Side Window, Left Hand | 1 |
| 26***01 | Glazing, Rubber, Side Window, Right Hand | 1 |
B2-3-2 Cab Glazing, One Piece Door
| 26***04 | Clamp | 8 |
| 26***02 | Glazing, Rubber, Door, Left Hand | 1 |
| 26***02 | Glazing, Rubber, Door, Right Hand | 1 |
B2-6-2 Mirror, Cab Mounted, Exterior
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
| 99***00 | Mirror, Unbreakable, Exterior | 2 |
B2-3-4 Cab Glazing, Two Piece Door
| 26***04 | Clamp | 4 |
| 26***02 | Clamp | 4 |
| 82***05 | Windscreen, Front,Laminated, Bronze,1042mm High | 1 |
B2-2-1 Door, All Glass
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Left Hand | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
B2-2-4 Door, Rear Side, Left & Right Hand, Catch Assembly
| 12***08 | Bush, Hinge | 4 |
| 13***3Z | Nut | 4 |
| 26***05 | Latch, Window, Lower Link | 2 |
B2-2-3 Door, Metal Frame, Two Piece Glass
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
| 12***00 | Lock, Door, Left Hand | 1 |
B2-5-1 Seat, Suspension, Isringhausen
| 40***01 | Kit-Backrest, Fabric; Nla Use Cover Set 40/91***81. | 1 |
| 40***02 | Kit-Seat Assembly, Fabric (Seat Only), Cover And Cushion; Nla Removed By San 14113.06/11***03.W Charles, For Cover Set, Use 40/91***81. | 1 |
| 40***03 | Seat, Suspension Assembly | 1 |
B2-5-2 Seat, Suspension, Kab/Bostrom
| 13***05 | Capscrew, M8 X 20 | 4 |
| 40***00 | Seat, Suspension, Kab 411 | 1 |
| 40***01 | Seat, Assembly Upper; Nla | 1 |
B2-4-1 Seat, Static
| 13***5Z | Bolt | 8 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-1-5 Canopy
| 12***02 | Plate, Compression | 2 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***5Z | Bolt | 19 |
B2-1-1 Cab Industrial
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***76 | Stay, Door, Lh | 1 |
B2-1-2 Cab Agricultral
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***76 | Stay, Door, Lh | 1 |
B2-1-3 Cab
| 12***02 | Plate, Compression | 6 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***05 | Bolt, Closing | 2 |
B3-2-1 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
B3-1-2 Labels
| 13***6Z | Bolt | 6 |
| 13***3Z | Nut | 6 |
| 14***1Z | Washer | 6 |
B3-1-3 Labels
| 81***43 | Label, Lh Door | 1 |
| 81***44 | Label, Rh Door | 1 |
| 81***54 | Label, Lh Side Window | 1 |
B3-3-1 Paint
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B3-2-2 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
B3-1-1 Labels
| 13***6Z | Bolt | 6 |
| 13***3Z | Nut | 6 |
| 14***1Z | Washer | 6 |
B6-1-3 Travel Struts
| 15***00 | Bolt | 2 |
| 26***00 | Bracket, Travel Strut, Lift Ram | 1 |
| 26***00 | Strut, Safety, Arms Raised | 1 |
B6-1-2 Homologation Parts, Italian
| 13***03 | Nut | 2 |
| 13***1Z | Nut, 4ba Plain | 4 |
| 14***9Z | Washer | 4 |
B6-1-4 Travel Struts
| 15***00 | Bolt | 2 |
| 26***00 | Bracket, Support | 1 |
| 26***00 | Bracket, Support | 1 |
B6-1-1 Homologation Parts, German
| 10***01 | Spring, 24" Bungy | 1 |
| 12***01 | Strap | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C Electrics-Machine,Cab & Engine
C1-2-2 Electrics Console
| 13***01 | Nut | 1 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut | 3 |
C1-2-1 Electrics Console
| 13***3Z | Nut | 12 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 6 |
| 13***4Z | Screw | 1 |
C1-4-1 Light, Front
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 2 |
C1-1-1 Electrics Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***6Z | Bolt | 1 |
| 13***8Z | Bolt | 2 |
C1-8-2 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***01 | Tap | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
C1-15-1 Installation, Shovel Reset
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 14 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
C1-12-1 Speed Transducer
| 14***9Z | Washer | 1 |
| 26***01 | Bracket | 1 |
| 26***02 | Bracket | 1 |
C1-3-1 Electrics, Cab
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 6 |
| 13***3Z | Nut | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
C1-10-3 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C1-1-2 Harness, Machine Electrics
| 71***00 | Harness, Engine Cover | 1 |
| 71***00 | Harness, Cab | 1 |
| 71***00 | Harness, Main | 1 |
C1-10-1 Instrument Cluster
| 70***00 | Cluster, Instrument | 1 |
| 70***08 | Seal | 1 |
| 70***16 | Bulb, 12v 1.2w | 15 |
C1-1-3 Electrics Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***8Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
C1-11-2 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 1 |
C1-10-2 Instrument Cluster
| 70***02 | Bezel | 1 |
| 70***03 | Glass | 1 |
| 70***04 | Seal | 1 |
C1-7-2 Motor, Wiper, Rear
| 15***03 | Cover | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Pantograph, 400mm Long | 1 |
C1-6-1 Motor, Wiper, Front
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Wiper | 1 |
| 71***00 | Motor, Wiper | 1 |
C1-5-1 Battery & Fittings
| 10***00 | Clamp | 1 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-4-3 Light, Front
| 26***00 | Light, Assembly, R.H.Dip | 2 |
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
C1-11-1 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 1 |
C1-12-2 Speed Transducer
| 14***9Z | Washer | 1 |
| 26***02 | Bracket | 1 |
| 26***03 | Bracket | 1 |
C1-14-1 Alarm, Reverse
| 13***3Z | Nut | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 1 |
| 20***07 | Tie, Cable - 100mm Long | 6 |
C1-13-1 Light, Beacon, Hazard Warning, Standard & Optional
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Amber) | 1 |
| 70***01 | Lens, Amber, 146mm Dia | 1 |
C1-4-2 Guards, Front Light, Optional
| 14***09 | Screw, Self Tapper, M8 X 2" Long | 8 |
| 26***00 | Guard, Headlight/Indicator | 2 |
C1-6-2 Motor, Wiper, Front
| 15***03 | Cover | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Wiper | 1 |
C1-9-1 Light, Rear
| 70***03 | Spring | 1 |
| 70***00 | Lens; Replaced By Mss Use 70***00 3 Pin Or, 70***00 4 Pin. See San03938 | 1 |
| 70***00 | Light, Combination; Replaced By 70***26 + 72***18, See San12321 | 2 |
C1-8-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***01 | Tap | 1 |
| 13***6Z | Bolt | 4 |
C1-5-2 Battery
| 10***00 | Clamp | 1 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-11-3 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 1 |
C1-3-2 Electrics Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-7-1 Motor, Wiper, Rear
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Pantograph, 400mm Long | 1 |
| 71***00 | Motor, Wiper | 1 |
C2-4-2 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-5-1 Motor, Starter
| 12***06 | Cover, Solenoid | 1 |
| 13***8Z | Bolt | 3 |
| 13***1Z | Nut | 3 |
C2-3-1 Alternator, A127-55amp 12.Volt
| 02***07 | Pulley, Alternator; Part N/A Use 1 Off Each 02/10***12 & 02/10***13 | 1 |
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
C2-3-3 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C2-3-2 Alternator, A127-65amp 12.Volt
| 02***19 | Pulley, Alternator, Twin Groove | 1 |
| 02***12 | Pulley, Alternator, D=86mm Single Groove | 1 |
| 71***00 | Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator, Alternator; Lucas Ref. 24158. Type Of Alternator Best Identified By Lucas Ref, Stamped On Body. | 1 |
C2-4-1 Alternator Mountings
| 02***77 | Bush | 2 |
| 02***92 | Washer | 3 |
| 02***07 | Washer | 1 |
C2-5-2 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
D Controls-Machine,Engine
D1-2-2 Control, 4 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***2Z | Bolt | 1 |
D1-1-1 Control, 3 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***03 | Bracket | 1 |
| 12***00 | Bar, Locking | 1 |
D1-3-1 Control, Loader, Dump Switch, Transmission
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 26***00 | Lever, Loader Control | 1 |
| 26***00 | Lever, Loader Control | 1 |
D1-2-3 Control, 4 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***2Z | Bolt | 1 |
D1-2-1 Control, 4 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***02 | Cover | 1 |
| 12***00 | Bar, Locking | 1 |
D1-1-3 Control, 3 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***4Z | Bolt | 1 |
D1-1-2 Control, 3 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***4Z | Bolt | 1 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 02***17 | Spring | 1 |
D3-1-1 Controls, Throttle & Stop, Ce Build
| 02***83 | Spring, Stop/Return | 1 |
| 02***04 | Adjuster | 1 |
| 02***55 | Spring | 1 |
D3-1-2 Controls, Throttle & Stop, Cm Build
| 02***63 | Pin | 1 |
| 13***5Z | Bolt | 3 |
| 13***2Z | Nut | 1 |
E Hydraulics
E1-2-3 Hose & Pipework, Main Hydraulics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
| 14***7Z | Washer, Spring | 3 |
E1-1-4 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-1-2 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-1-3 Cooler, Oil, Hydraulic, Installation
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-2-2 Hose & Pipework, 3 Spool
| 13***04 | Bolt | 5 |
| 14***02 | Washer | 5 |
| 14***05 | Washer; Replaces 82***03 | 3 |
E1-3-2 Hose & Pipework, Auxiliary Service
| 13***04 | Bolt | 7 |
| 13***03 | Nut | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-5-2 Hose & Pipework, Loader End, 4 Spool
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-2-1 Hose & Pipework, 3 Spool
| 13***02 | Bolt | 5 |
| 13***03 | Nut | 1 |
| 14***02 | Washer | 6 |
E1-1-5 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-1-1 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-4-1 Hose & Pipework, Quickhitch
| 65***32 | Pipe | 1 |
| 65***33 | Pipe | 1 |
| 81***64 | Adapter, Elbow - Male/Female | 2 |
E1-3-1 Hose & Pipework, Auxiliary Service
| 13***02 | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***02 | Washer | 2 |
E1-5-1 Hose & Pipework, Loader End, 3 Spool
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
E1-4-2 Hose & Pipework, Quickhitch
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
E2-2-2 Pump, Main Hydraulic, Fittings & Mountings
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***7Z | Bolt, M16 X 75mm | 1 |
E2-1-2 Pump, Main Hydraulic
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
| 20***05 | Nut; Replaced By 20/20***06, See San05154 | 1 |
| 20***01 | Kit-Seal | 1 |
E2-2-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 1 |
E2-1-1 Pump, Main Hydraulic
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
| 20***05 | Nut; Replaced By 20/20***06, See San05154 | 1 |
E2-3-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 1 |
| 13***3Z | Nut, M12 | 2 |
E3-3-3 Valve, Section, Kick-Out Detent, Restricted Motor
| 25***27 | Plate, Seal Retainer | 3 |
| 25***28 | Seal, Wiper | 1 |
| 25***29 | O Ring | 2 |
E3-1-1 Valve, Control
| 25***01 | Rod, Tie | 3 |
| 25***01 | Rod, Tie | 3 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-3-4 Valve, Section, Components, Float Spool
| 25***07 | Capscrew | 2 |
| 25***27 | Plate, Seal Retainer | 1 |
| 25***32 | Spring; Note 3. Stronger Spring Used For Sway, Spring | 1 |
E3-3-2 Valve, Section, Kick-Out Detent, Restricted Motor
| 25***27 | Plate, Seal Retainer | 3 |
| 25***28 | Seal, Wiper | 1 |
| 25***29 | O Ring | 2 |
E3-3-1 Valve, Section, Components, Float Spool
| 25***07 | Capscrew | 2 |
| 25***27 | Plate, Seal Retainer | 1 |
| 25***36 | Valve, Poppet | 1 |
E3-1-4 Valve, Control, Shovel Reset
| 25***00 | Valve, Assembly, 3 Spool, Shovel Reset | 1 |
| 25***00 | Valve, Assembly, 4 Spool, Shovel Reset | 1 |
E3-2-1 Valve, Section, Components Standard
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 1 |
| 25***31 | Spacer | 1 |
E3-4-3 Valve, Control, Adapters 4 Spool
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E3-3-5 Valve, Section, Components Standard
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 1 |
| 25***31 | Spacer | 1 |
E3-1-3 Valve, Control, Shovel Reset
| 25***00 | Valve, Assembly, 3 Spool, Shovel Reset | 1 |
| 25***00 | Valve, Assembly, 4 Spool, Shovel Reset | 1 |
E3-4-2 Valve, Control, Adapters 3 Spool
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E3-4-4 Valve, Control, Adapters
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***04 | Adapter, Male/Male | 3 |
E3-1-2 Valve, Control
| 25***01 | Rod, Tie | 3 |
| 25***01 | Rod, Tie | 3 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-5-1 Lubricants & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***42 | Element, Oil Filter | 1 |
| 32***02 | Kit-Element, Fuel Filter, Short | 1 |
E3-4-1 Valve, Control, Adapters 3 & 4 Spool
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E4-4-1 Seal Kit, Steer Ram
| 23***02 | O Ring | 1 |
| 23***04 | O Ring | 1 |
| 24***02 | Seal, Gland | 1 |
E4-2-2 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-1-2 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-2-4 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-2-3 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 24***18 | O Ring | 1 |
E4-3-1 Ram, Clamshovel, 6 In 1
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-2-1 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 24***18 | O Ring | 1 |
E4-1-3 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
E4-1-4 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-5-1 Seal Kit, Steer Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-1-1 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 24***18 | O Ring | 1 |
E4-3-2 Ram, Clamshovel, 6 In 1
| 12***06 | Bush, Spring Steel | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***02 | O Ring | 1 |
F Axles,Wheels & Transmission
F1-1-7 Axle Assembly, Front & Rear
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 26***00 | Plate, Sensor | 1 |
| 41***01 | Gasket, Multi | 0 |
F1-4-4 Propshafts, Transmission, See F1-4-7
| 11***25 | Strap | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-6-2 Axle Drive Head, 440/06600, 440/06700
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 44***00 | Gear, Crown Wheel & Pinion, 3.636:1 (11t/40t); Replaced By 45***21, See San 10680 | 1 |
| 44***01 | Casing, Outer | 1 |
F1-1-2 Axle Assembly, Front & Rear
| 10***01 | Nut | 32 |
| 13***08 | Bolt | 12 |
| 13***09 | Bolt, M10 X 35 | 12 |
F1-4-1 Propshafts, Hurth Axle
| 11***01 | Strap, Bearing | 4 |
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt | 12 |
F1-7-1 Differential, Assembly, Jcb Axle
| 13***6Z | Bolt, M8 X 70 | 8 |
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Differential, Assembly | 1 |
F1-3-1 Differential, Components, Hurth
| 10***44 | Bolt | 2 |
| 10***45 | Washer, Tab | 2 |
| 10***46 | Bolt | 12 |
F1-5-2 Axle Assembly, Jcb Axle
| 13***7Z | Bolt, Coated | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 22***41 | Circlip | 6 |
F1-4-8 Propshafts, Transmission
| 11***25 | Strap | 4 |
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt | 4 |
F1-4-5 Propshafts, Transmission, See F1-4-8
| 11***25 | Strap | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-4-9 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Pin, Hexagon Head | 4 |
F1-4-3 Propshafts, Jcb Axle, See F1-4-7
| 11***24 | Strap, Bearing | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-2-2 Axle Drive Head
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
F1-4-2 Propshafts, Transmission, See F1-4-8
| 11***25 | Strap | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-3-2 Differential, Components, Limited Slip, Hurth Axle
| 10***44 | Bolt | 2 |
| 10***45 | Washer, Tab | 2 |
| 10***46 | Bolt | 12 |
F1-2-1 Differential, Casing & Covers, Hurth
| 10***30 | O Ring | 4 |
| 10***31 | Housing, Intermediate; Was 171.01.003.04 D.Jackson 17/02/09 | 1 |
| 10***32 | O Ring | 2 |
F1-8-1 Differential, Assembly, Limited Slip, Jcb Axle
| 13***15 | Screw | 8 |
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Differential, Limited Slip | 1 |
F1-1-3 Axle, Drive Head, 3.875 : 1
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***06 | Gear; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. | 2 |
F1-2-3 Differential, Assembly, Limited Slip
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***07 | Gear, Pinion; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. Lsd 2 Pinion 44***00 | 2 |
F1-1-6 Axle Assembly, Front & Rear
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 26***00 | Plate, Sensor | 1 |
| 41***01 | Gasket, Multi | 0 |
F1-1-4 Hub & Components
| 13***07 | Bolt | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Carrier, Annulus | 2 |
F1-4-7 Propshafts, Jcb Axle
| 11***24 | Strap, Bearing | 4 |
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 4 |
F1-5-1 Axle Assembly, Jcb Axle
| 10***01 | Nut | 20 |
| 13***7Z | Bolt, Coated | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-1-5 Axle, Drive Head, 3.875 : 1, Limited Slip Differential
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***07 | Gear, Pinion; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. Lsd 2 Pinion 44***00 | 2 |
F1-6-1 Axle Drive Head, 440/01400, 440/02000
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 44***01 | Casing, Outer | 1 |
| 44***00 | Yoke | 1 |
F1-1-1 Axle Assembly
| 10***00 | Axle, Complete, Standard Diff | 2 |
| 10***01 | Housing | 2 |
| 10***02 | Bolt | 4 |
F2-3-6 Clutch Reverser Unit, Service Supply, 10/2003 Onwards
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
| 44***02 | Plate, Friction | 10 |
F2-8-1 Hose & Pipework, Oil Cooler, Transmission
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F2-3-3 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F2-5-1 Torque Converter, Drive Plate, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***00 | Converter, Torque | 1 |
F2-1-1 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F2-2-2 Gear Assemblies
| 13***05 | Bolt | 1 |
| 44***03 | Sleeve | 2 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F2-4-4 Gear Change
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
F2-1-2 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F2-1-3 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F2-4-2 Gear Change
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
F2-3-4 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
| 44***02 | Plate, Friction | 10 |
F2-3-1 Clutch Reverser Unit
| 13***02 | Plug, Blanking | 2 |
| 22***57 | Circlip, External | 4 |
| 22***94 | Circlip | 2 |
F2-4-3 Gear Change
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
| 12***17 | Top, Control Knob | 1 |
F2-2-1 Gear Assemblies
| 13***05 | Bolt | 2 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F2-1-4 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F2-8-3 Hose & Pipework, Oil Cooler, Transmission
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F2-5-2 Torque Converter, Drive Plate, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F2-8-2 Hose & Pipework, Oil Cooler, Transmission
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F2-3-2 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
| 44***15 | Seal, Ring | 4 |
F2-8-4 Hose & Pipework, Oil Cooler, Transmission
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F2-6-1 Transmission, Mounting
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
F2-6-2 Transmission, Mounting
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***6Z | Bolt, M16 X 70mm | 2 |
F2-3-5 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F2-4-1 Gear Change
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
F3-1-1 Transmission, Drop Box
| 05***00 | Gearbox, Drop, Complete | 1 |
| 05***01 | Housing, Main | 1 |
| 05***02 | Gear, Outer | 2 |
F3-1-2 Transmission, Drop Box
| 05***00 | Gearbox, Drop, Complete | 1 |
| 05***01 | Housing, Main | 1 |
| 05***02 | Gear, Outer | 2 |
F4-2-1 Wheels & Tyres, 406 Farm Master
| 15***00 | Valve | 1 |
| 15***01 | Valve | 1 |
| 26***00 | Wheel, & Tyre Assembly, As Farmer Contin'Tl | 4 |
F4-4-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 26***00 | Wheel, Assembly 14.5-20 10pr, Continental | 4 |
| 26***00 | Wheel, Assembly 14.5-20 10pr, Continental | 4 |
F4-1-1 Wheels & Tyres, 406 Industrial
| 26***00 | Wheel, & Tyre Assembly, E58 Continental | 4 |
| 26***00 | Wheel, & Tyre Assembly, E58 Continental | 1 |
| 26***00 | Wheel, & Tyre Assembly, E58 Continental | 4 |
F4-3-1 Wheels & Tyres
| 15***00 | Valve | 1 |
| 15***01 | Valve | 1 |
| 26***00 | Wheel, Assembly,12.5-18mpt10ply, Continental | 4 |
F6-2-1 Clutch, Input, Powershift Transmission
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 6 |
F6-10-1 Transmission, Mounting
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***6Z | Bolt, M16 X 70mm | 2 |
F6-1-2 Transmission, Powershift, External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 15 |
F6-7-1 Pipework, Powershift Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***17 | Adapter, 5/8" X 1/2" M/M | 2 |
F6-8-1 Torque Converter, 2.4 : 1 Ratio, Drive Plate & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***00 | Converter, Torque | 1 |
F6-4-1 Mainshaft Components, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F6-8-2 Torque Converter, 2.4 : 1 Ratio, Drive Plate & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-7-2 Pipework, Powershift Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 44***00 | Manifold, 4 Way | 1 |
F6-5-1 Layshaft Components, Powershift Transmission
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***13 | Spacer | 1 |
F6-6-1 Switch, Solenoid, Powershift Transmission
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 2 |
| 13***0Z | Bolt | 1 |
F6-1-1 Transmission, Powershift, External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 15 |
F6-3-1 Clutch, Reverse, Powershift Transmission
| 13***5Z | Bolt | 4 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
G Brakes
G1-3-1 Brake, Parking
| 13***10 | Bolt | 2 |
| 13***07 | Bolt | 3 |
| 13***04 | Nut | 2 |
G1-2-4 Brake, Master Cylinder
| 15***00 | Cylinder, Master | 1 |
| 15***01 | Kit-Seal | 1 |
| 15***02 | Circlip | 1 |
G1-1-1 Brake, System
| 13***16 | Bolt | 4 |
| 13***03 | Nut | 3 |
| 14***02 | Washer | 3 |
G1-2-1 Brake Pedal, & Master Cylinder
| 12***00 | Reservoir | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***2Z | Bolt | 2 |
G1-1-3 Brake, System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 8 |
G1-4-2 Brake, Parking, Control
| 12***03 | Gaiter, Brake Lever | 1 |
| 13***8Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
G1-1-4 Brake, System, Jcb Axle
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 8 |
G1-4-1 Brake, Parking, Control
| 12***03 | Gaiter, Brake Lever | 1 |
| 13***06 | Bolt | 2 |
| 13***02 | Nut | 1 |
G1-3-3 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
G1-5-1 Brakes, Hurth Axle
| 10***75 | Bolt, Adjusting | 6 |
| 10***76 | Spring | 6 |
| 10***77 | O Ring | 6 |
G1-5-2 Brake, Axle
| 22***45 | Circlip | 2 |
| 45***11 | Plate, Friction; Replaced By Nla. 45***4a + 45***6a Or, (45***1a 2cx 2dx Build) | 6 |
| 45***06 | Piston, Brake; Replaced 45***10, See San06472 | 2 |
G1-2-2 Brake Pedal, & Master Cylinder
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***01 | Cap | 1 |
G1-3-4 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
G1-6-1 Brakes, Jcb Axle
| 44***05 | Piston, Brake | 2 |
| 44***06 | Plate, Friction, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Nla Use 44***21 With 44***20 In Axle Sets. 44***21 Must Be Used With 44***20 In Complete Axle Sets. See Ti 057 (G19/N.Am), Plate, Friction, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1 | 6 |
| 44***07 | Plate, Counter, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Nla Use 44***20 With 44***21 In Axle Sets. 44***20 Must Be Used With 44***21 In Complete Axle Sets. See Ti 057 (G19/N.Am), Plate, Counter, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Plate, Counter, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Nla. Use 44***20 With 44***21 In Axle Set. 44***20 Must Be Used With 44***21 In Complete Axle Sets. See Ti 057 (G19/N.Am) | 8 |
G1-2-3 Brake Pedal, & Master Cylinder
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***01 | Cap | 1 |
G1-3-2 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***07 | Bolt | 3 |
| 13***04 | Nut | 2 |
G1-1-2 Brake, System, Hurth Axle
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
H Steering
H1-4-4 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-6-1 Valve, Priority, Fittings & Adapters
| 13***4Z | Bolt | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-2-1 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
H1-4-3 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-4-2 Valve Adapters, Steering
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
H1-1-1 Hose & Pipework, Steering
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***13 | Capscrew | 2 |
| 14***11 | Seal, Bonded | 1 |
H1-2-2 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
H1-5-2 Valve, Priority
| 35***00 | Valve, Priority | 1 |
| 35***01 | Seal | 2 |
| 35***00 | Valve, Priority | 1 |
H1-3-2 Ram, Steering
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 24***10 | O Ring | 1 |
H1-6-2 Valve, Priority, Fittings & Adapters
| 13***4Z | Bolt | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-1-2 Hose & Pipework, Steering
| 61***00 | Hose, 1/4bsp X 1680 | 1 |
| 61***00 | Hose, 1/4"Bsp X 1890mm | 1 |
| 61***00 | Hose, 3/8"Bsp X 1050mm; Use With Quick-Hitch. 6 In 1 Shovel. Not Applicable To Usa Builds, Hose, 3/8"Bsp X 1050mm | 2 |
H1-4-5 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-1-3 Hose & Pipework, Steering
| 61***00 | Hose, 1/4"Bsp X 1890mm | 1 |
| 61***00 | Hose, 3/8"Bsp X 1050mm; Use With Quick-Hitch. 6 In 1 Shovel. Not Applicable To Usa Builds, Hose, 3/8"Bsp X 1050mm | 2 |
| 61***00 | Hose | 1 |
H1-5-1 Valve, Priority
| 35***00 | Valve, Priority | 1 |
| 35***01 | Spring | 1 |
| 35***03 | Plug | 1 |
H1-3-3 Ram, Steering
| 14***01 | Washer, Aluminium | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
| 55***00 | Ram, Complete | 1 |
H1-4-1 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-5-3 Valve, Priority, Fittings & Adapters, Hurth Axled Machines
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***3Z | Capscrew | 2 |
| 14***11 | Seal, Bonded | 1 |
H1-3-1 Ram, Steering
| 14***01 | Washer, Aluminium | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
| 24***06 | O Ring | 1 |
H1-3-4 Ram, Steering
| 14***01 | Washer, Aluminium | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
| 55***00 | Ram, Complete | 1 |
H1-4-6 Valve Adapters, Steering
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
L Engines D3.152 Series
L1-8-1 Engine Mountings
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 6 |
| 13***6Z | Bolt | 2 |
L1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Cm Build
| 02***13 | Rod, Connecting | 3 |
| 02***15 | Bolt | 2 |
| 02***16 | Nut | 2 |
L1-5-1 Fans, Pulleys, & Fan Belt, Ce & Cm Builds
| 02***39 | Washer | 1 |
| 02***27 | Belt, Fan, Pair | 1 |
| 02***86 | Bolt | 1 |
L1-2-1 Engine, Short, Ce Build
| 02***10 | Plug | 1 |
| 02***69 | Plug | 2 |
| 02***70 | Engine, Short | 1 |
L1-2-2 Engine, Short, Cm Build
| 02***10 | Plug | 1 |
| 02***69 | Plug | 2 |
| 02***90 | Engine, Short | 1 |
L1-3-1 Block Assembly, Ce Build
| 02***05 | Plug, Core, D=32mm | 4 |
| 02***23 | Switch, Oil Pressure | 1 |
| 02***32 | Plug, Drain | 1 |
L1-1-2 Engine, Complete, Cm Build
| 01***00 | Engine, Complete, D3.152, Nat/Aspirated, 49bhp | 1 |
L1-6-1 Timing Case, Camshaft & Gears, Ce Build
| 02***37 | Cap, Oil Filler | 1 |
| 02***07 | Camshaft | 1 |
| 02***91 | Plug, Oil Drain | 1 |
L1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Ce Build
| 02***13 | Rod, Connecting | 3 |
| 02***15 | Bolt | 2 |
| 02***16 | Nut | 2 |
L1-6-2 Timing Case, Camshaft & Gears, Cm Build
| 02***37 | Cap, Oil Filler | 1 |
| 02***82 | Plug, Oil Drain | 1 |
| 02***14 | Screw | 3 |
L1-1-1 Engine, Complete, Ce Build
| 01***00 | Engine, Complete D3.152, Nat/Aspirated, 46bhp | 1 |
L1-3-2 Block Assembly, Cm Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***32 | Plug, Drain | 1 |
| 02***96 | Plug, Core, D=32mm | 5 |
L1-7-1 Flywheel & Housing, Ce & Cm Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 6 |
| 02***29 | Housing, Flywheel | 1 |
L1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ce Build
| 02***12 | Crankshaft, Assembly | 1 |
| 02***13 | Rod, Connecting | 3 |
| 02***15 | Bolt | 2 |
L2-1-2 Cylinder Head, Cm Build
| 02***95 | Plug, Taper | 2 |
| 02***73 | Gasket | 1 |
| 02***62 | Valve, Exhaust | 3 |
L2-2-1 Rocker Assembly, Push Rods & Tappets, Ce Build
| 02***52 | Plug, Core, D=11mm | 2 |
| 02***57 | Union | 1 |
| 02***03 | Nut, Lock | 6 |
L2-3-1 Rocker Cover, Ce & Cm Builds
| 02***59 | Stud | 1 |
| 02***97 | Washer | 2 |
| 02***98 | Nut | 2 |
L2-4-1 Lifting Plates, Engine, Ce & Cm Builds
| 02***76 | Plate, Lifting | 1 |
| 02***77 | Stud | 2 |
| 02***78 | Plate, Lifting | 1 |
L2-2-2 Rocker Assembly, Push Rods & Tappets, Cm Build
| 02***52 | Plug, Core, D=11mm | 2 |
| 02***57 | Union | 1 |
| 02***03 | Nut, Lock | 6 |
L2-1-1 Cylinder Head, Ce Build
| 02***95 | Plug, Taper | 2 |
| 02***73 | Gasket | 1 |
| 02***60 | Head, Cylinder Assembly | 1 |
L3-2-1 Manifold, Exhaust, Ce & Cm Builds
| 02***51 | Nut | 3 |
| 02***07 | Gasket | 1 |
| 02***08 | Plate, Blanking | 1 |
L3-3-2 Filter, Air, Rotopamic, Optional
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***6Z | Bolt | 2 |
L3-3-1 Filter, Air
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 1 |
| 13***6Z | Bolt | 1 |
L3-3-3 Filter, Pre-Cleaner, Optional
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 3 |
| 26***00 | Panel, Mounting | 1 |
| 26***00 | Panel, Mounting | 1 |
L3-4-1 Silencer & Extension
| 02***51 | Nut | 3 |
| 02***07 | Gasket | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
L3-4-2 Silencer & Extension, 'Q'Build
| 02***51 | Nut | 3 |
| 02***07 | Gasket | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
L3-1-1 Manifold, Induction, Ce & Cm Build
| 02***05 | Manifold, Induction | 1 |
| 02***06 | Gasket | 1 |
| 13***0Z | Bolt | 7 |
L4-4-2 Radiator, Hoses & Pipework, Ce & Cm Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
L4-4-1 Radiator, Hoses & Pipework, Ce Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
L4-3-3 Radiator, Fittings & Mountings, Ce & Cm Builds
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Bolt, M10 X 16 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
L4-2-1 Thermostat, Housing, Inlet & Outlet, Ce & Cm Builds
| 02***71 | Thermostat | 1 |
| 02***95 | Plug, Taper | 1 |
| 02***45 | Kit-Hose, By-Pass | 1 |
L4-1-1 Pump, Water, Ce & Cm Builds
| 02***72 | Gasket | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
| 02***44 | Bolt | 1 |
L4-3-2 Radiator, Fittings & Mountings, Ce Build
| 13***4Z | Bolt | 4 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
L4-3-1 Radiator, Fittings & Mountings, Ce Build
| 13***8Z | Bolt | 8 |
| 13***3Z | Nut | 4 |
| 14***3Z | Washer | 8 |
L5-1-1 Sump, Oil, Ce & Cm Builds
| 02***16 | Nut | 1 |
| 02***20 | Olive | 1 |
| 02***66 | Seal | 1 |
L5-4-1 Filter, Oil, & Oil Feed Pipes, Ce & Cm Builds
| 02***48 | Elbow | 2 |
| 02***11 | Washer | 2 |
| 02***36 | Washer, Seal | 2 |
L5-2-1 Pump, Oil, Ce & Cm Builds
| 02***64 | Plunger | 1 |
| 02***65 | Spring | 1 |
| 02***16 | Nut | 2 |
L6-6-1 Filter, Fuel Sediment, Ce Build
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
L6-2-3 Injectors, Fuel, & Injection Pipes, Cm Build
| 02***53 | Washer | 3 |
| 02***81 | Washer | 6 |
| 02***87 | Damper, Vibration | 4 |
L6-1-2 Pump, Fuel Injection, Cm Build
| 02***76 | Gasket | 1 |
| 02***58 | Stud | 3 |
| 02***19 | Gear, Injection Pump | 1 |
L6-6-2 Filter, Fuel Sediment, Ce & Cm Builds
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
L6-1-1 Pump, Fuel Injection, Ce Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***02 | Sleeve | 1 |
L6-2-1 Injectors, Fuel, & Injection Pipes, Ce Build
| 02***53 | Washer | 3 |
| 02***81 | Washer | 6 |
| 02***87 | Damper, Vibration | 4 |
L6-2-2 Injectors, Fuel, & Injection Pipes, Ce Build
| 02***53 | Washer | 3 |
| 02***81 | Washer | 6 |
| 02***87 | Damper, Vibration | 4 |
L6-3-1 Fuel System, Ce Build
| 02***95 | Valve, Non-Return | 1 |
| 02***97 | Bolt | 3 |
| 02***17 | Nut | 4 |
L6-4-1 Filter, Fuel, Ce & Cm Builds
| 13***5Z | Bolt | 2 |
| 14***2Z | Washer | 2 |
| 14***5Z | Washer, Spring - 5/16", Zinc Plated | 2 |
L6-3-2 Fuel System, Cm Build
| 02***97 | Bolt | 2 |
| 02***17 | Nut | 3 |
| 02***18 | Nut | 5 |
L6-5-1 Pump, Fuel Lift, Ce & Cm Builds
| 02***80 | Gasket | 1 |
| 02***04 | Nut | 4 |
| 02***86 | Washer | 4 |
L8-1-1 Gasket Sets, Ce Build
| 02***72 | Kit-Gasket, Top | 1 |
| 02***73 | Kit-Gasket, Bottom | 1 |
L8-1-2 Gasket Sets, Cm Build
| 02***66 | Kit-Gasket, Bottom | 1 |
| 02***05 | Kit-Gasket, Top | 1 |
N Engine 1004-4 Series
N1-8-1 Engine Mountings, Aa Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated, 60bhp | 1 |
N1-3-1 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa Build
| 02***79 | Screw | 3 |
| 02***14 | Pulley, Fan Drive | 1 |
| 02***16 | Spacer, Fan, 13mm | 1 |
N1-7-1 Flywheel & Housing, Aa Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***14 | Washer | 6 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-6-1 Timing Case, Camshaft & Gears, Aa Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N2-2-3 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-3-3 Rocker Cover, Aa Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N2-4-1 Lifting Plates, Engine, Aa Build
| 02***13 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***30 | Lever, Rocker, Left Hand | 4 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-3-1 Rocker Cover, Aa Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-3-1 Filter, Air, Aa Build
| 13***0Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Screw, M10x35mm | 2 |
N3-4-1 Silencer & Extension, Aa Build
| 13***7Z | Bolt, M10x25 | 3 |
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***0Z | Bolt, M10 X 40 | 3 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***03 | Stud | 3 |
N3-4-2 Silencer & Extension, 'Q'Build
| 13***7Z | Bolt, M10x25 | 7 |
| 13***2Z | Bolt, M10 X 120 | 1 |
| 13***3Z | Nut, Lock, M10 | 6 |
N3-3-5 Filter, Air, Rotopamic, Optional
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
N3-3-3 Filter, Pre-Cleaner, Optional
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 3 |
| 26***01 | Plate, Blanking | 1 |
| 26***00 | Panel, Mounting | 1 |
N4-3-1 Radiator, Fittings & Mountings, Aa Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M10 X 16 | 2 |
N4-1-1 Pump, Water, Aa Build
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***84 | Seal | 1 |
N4-4-1 Radiator, Hoses & Pipework, Aa Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa Build
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***44 | Housing, Thermostat | 1 |
N5-4-1 Filter, Oil, Aa Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
N5-1-1 Sump, Oil, & Fittings, Aa Build
| 02***60 | Gasket, Oil Sump | 1 |
| 02***66 | Bracket | 1 |
| 02***26 | Spacer | 1 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***61 | Shaft, Idler, Oil Pump | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-4-2 Filter, Oil, Aa Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***33 | Sleeve | 1 |
N6-7-1 Filter, Fuel, Aa Build
| 02***52 | Bracket, Mounting | 1 |
| 02***35 | Bolt | 2 |
| 02***37 | Bolt | 2 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-8-1 Pump, Fuel Lift, Aa Build
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-4-1 Fuel Pipes, Tank To Fuel Filter, Aa Build
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-6-1 Filter, Fuel Sediment, Aa Build
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***49 | Clip | 1 |
N6-6-2 Filter, Fuel Sediment, Aa Build
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
N8-1-1 Gasket Sets, Aa Build
| 02***14 | Kit-Gasket, Top | 1 |
| 02***51 | Kit-Gasket, Bottom | 1 |
| 02***74 | Kit-Gasket, Top | 1 |
408 serial number reference
The machine identification plate is located on the right-hand side of the loader tower or cab frame. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 0755001 - 0757999 | JCB 408 ZX Wheel Loader lift cylinder seal kit applicability | Confirmed by HW Part Store product listing for JCB 408 ZX & 408B ZX lift cylinder seal kit. |
| 1136001 - 1136999 | JCB 408 ZX Wheel Loader lift cylinder seal kit applicability | Confirmed by HW Part Store product listing for JCB 408 ZX & 408B ZX lift cylinder seal kit. |
Frequently asked questions
What engine does the JCB 408 use?
The JCB 408 uses a Perkins 1104C-44, a 4-cylinder, naturally aspirated diesel engine with 4401.6 cc (268.6 cu in) displacement, producing 75 hp (55.9 kW).
What is the operating weight of the JCB 408?
The standard operating weight is 4839.8 kg (10670 lbs). Weight varies by configuration, attachment package, and tire setup.
What model replaced the JCB 408?
The JCB 409 series succeeded the 408, sharing similar structural dimensions but featuring updated engine and hydraulic specifications.
What 408 owners discuss
What are the known powertrain and transmission behaviors for the JCB 408 series?
The JCB 408 utilizes a hydrostatic drive system. Community reports indicate that loss of forward motion, particularly in first and third gears, is often caused by electrical faults rather than mechanical failure. Specifically, broken wires in the connector plug for the transmission solenoids can prevent gear engagement. If electrical connections are intact, internal transmission failure is a possibility, requiring disassembly to inspect for broken components. The system relies on hydraulic solenoids activated by microswitches on the shuttle lever to engage gears.
What hydraulic system issues are typical for older JCB loaders like the 408?
Operators report that hydraulic performance can degrade significantly if the machine is operated with the rear end lower than the front (e.g., in a hole), suggesting the hydraulic pump struggles to draw oil from the sump under certain tilt angles. Common maintenance items include the orbital steering valve, which is a frequent leak point on older JCB models. Low hydraulic oil levels or a clogged hydraulic strainer are primary causes of slow or non-responsive hydraulics. Regular fluid and filter changes are critical to prevent contamination issues that affect both steering and drive functions.
What are the common engine quirks and failure modes for the JCB 408 series?
Engine issues vary by generation. Early Dieselmax engines (Tier 2 and early Tier 3) are prone to big-end bearing failures on the crankshaft, especially if oil change intervals were extended or oil quality was poor. Fuel injection pump faults are also common on these earlier mechanical and early electronic engines. General starting problems are frequently attributed to battery issues or complex fuel system faults, including blockages or leaks in fuel lines, injectors, and the pump. Low power output may result from exhaust obstructions (catalytic converter, manifold, muffler) or engine control module malfunctions.
What electrical and sensor issues are commonly reported?
Electrical faults are a primary cause of transmission failure. The forward/reverse lever operates microswitches that activate hydraulic solenoids on the transmission body; broken wires in the connector plug for these solenoids can cause a loss of gear engagement. Operators should inspect the ignition switch, fuses, and relays for optimal working order. Diagnostic tools can be used to check the status of the engine control module and fuel delivery systems. Intermittent warning lights may indicate hydraulic system contaminants or sensor errors requiring diagnostic scanning.
What are the typical undercarriage and wear patterns for the JCB 408?
The JCB 408 is a wheel loader, so it uses tires rather than a tracked undercarriage. However, the drive motors (face-mounted to side plates) on JCB skid steer and compact loader platforms have been noted for potential design flaws where the side plate is too thin, leading to motor squirming and plate fracturing under operator abuse. For the 408 wheel loader, wear patterns include hydraulic hose failures due to pressure spikes or poor crimping, and orbital steering valve leaks. Drive chain tension on similar JCB compact machines must be adjusted regularly to prevent hammering of motors and drive components.
What engine is used in the JCB 408 series?
The JCB 408 series uses Perkins engines. Specific models like the 408 BZX list Perkins as the engine manufacturer. Some later or specific regional variants may use Kubota engines, as seen in some 3TST dumper listings, but the 408 wheel loader line is primarily associated with Perkins powerplants in the provided specifications.
What should be checked when buying a used JCB 408?
When purchasing a used JCB 408, check the following: 1) Transmission operation: Test all forward and reverse gears, especially first and third, for engagement. Inspect the electrical connector plug for broken wires. 2) Hydraulic system: Check for leaks at the orbital steering valve and ensure hydraulic oil levels are correct. Test hydraulic performance with the machine tilted to identify suction issues. 3) Engine: Inspect for starting difficulties, unusual noises (knocking indicating bearing wear), and check for exhaust obstructions. 4) Structure: Inspect the side plates and motor mounts for fractures, particularly on skid steer variants. 5) Maintenance history: Verify regular fluid and filter changes to assess internal wear. Have your dealer verify the exact serial range specifications and attachment package before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 408. Related factory variants of the same model family:
408
Need a specific 408 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.