JCBagriculturalwheeled loaders
Jcb 406 Farm Master
Maintenance schedule, common problems & OEM parts breakdown
The JCB 406 Farm Master is a compact wheel loader designed for agricultural and utility applications. Produced from 1988 to 1994, the machine features a 36.4 kW (49 hp) JCB Diesel by Kohler engine and a 2-speed hydrostatic transmission. Operating weights range from 4,790 kg to 5,020 kg depending on configuration. The 406 succeeded earlier JCB loading shovel models and was followed by the 407, 408, and 409 series. Configurations included open differential or limited slip differentials, with options for 100% switchable front axle diff locks and various tire sizes such as 405/70 R18.
Across its production run, the 406 Farm Master maintained a consistent focus on low maintenance and high uptime, utilizing JCB's extended 500-hour oil change intervals. The machine's significance in the used market lies in its robust Deutz or Kohler engine options and simple hydrostatic drivetrain, which appeals to buyers seeking reliable, easy-to-service compact loaders for farm and municipal use. Parts availability remains strong due to the machine's widespread adoption in agriculture, making it a staple in the secondary market for compact wheel loaders.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 406 Farm Master specifications
Engine
| Model | JCB Diesel by Kohler - KDI 2504 M |
| Type | 4 stroke, Mechanical |
| Displacement | 151.5 cu in (2,483 cc) |
| Cylinders | 4 |
| Aspiration | Naturally aspirated |
| Gross Power | 49 hp (36.4 kW) @ 2600 rpm |
| Max Torque | 170 Nm (125 lb-ft) @ 1500 rpm |
| Emissions Tier | Stage 3A |
Weights
| Operating Weight | 10,743 lb (4,873 kg) to 11,067 lb (5,020 kg) varies by configuration |
| Full Turn Tipping Load | 7,175 lb (3,250 kg) |
Dimensions
| Transport Length (with bucket on ground) | 16.85 ft (5.13 m) |
| Transport Width (over tires) | 5.67 ft (1.73 m) |
| Transport Height (to top of cab) | 8.21 ft (2.50 m) |
| Wheelbase | 6.89 ft (2.10 m) |
| Ground Clearance | 1.03 ft (0.31 m) |
| Max Lift Height (hinge pin) | 10.24 ft (3.12 m) |
| Reach at Max Lift and Dump | 2.51 ft (0.77 m) |
Performance
| Max Speed (Forward) | 12.5 mph (20 km/h) |
| Transmission Type | 2-speed hydrostatic |
| Bucket Capacity (Heaped) | 1.05 cu yd (0.80 m³) |
| Bucket Width | 6.24 ft (1.90 m) |
| Breakout Force | 9,419.5 lbf (41,900 N) |
| Dump Clearance (at max raise) | 8.17 ft (2.49 m) |
| Raise Time | 4.9 sec |
| Dump Time | 3.5 sec |
| Lower Time | 3.1 sec |
Service capacities (summary)
| Fuel Tank | 21.2 gal (80 L) |
| Hydraulic System Fluid | 18.5 gal (70 L) |
| Engine Oil | 3 gal (11 L) |
| Axle Oil (Front) | 1.2 gal (4.5 L) |
| Axle Oil (Rear) | 1.6 gal (6 L) |
| Hydraulic Pump Flow | 17 gal/min (64 L/min) |
| Optional Aux Hydraulic Pump Flow | 15.9 gal/min (60 L/min) |
| Hydraulic System Max Pressure | 230 bar (3,336 psi) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 406 Farm Master maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 406 Farm Master beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, collect baseline oil samples from the engine, hydraulic tank, front axle, and rear axle. Compare future samples against this baseline to detect bearing wear or contamination early. Inspect the hydraulic return filter magnet for metallic debris at every 500-hour service. Monitor coolant condition during the 1000-hour service to prevent corrosion in the JCB Diesel by Kohler engine cooling system. Use JCB-spec long-life coolant to maintain thermal efficiency and prevent scaling in the compact radiator pack.
Corrective & Common Repairs
Address turbocharger shaft play and charge cooler boot integrity during the 1000-hour service to maintain engine performance on the 36.4 kW unit. Replace the primary and secondary fuel filters at 500 hours to protect the injection system from diesel contamination. Inspect the hydrostatic transmission oil and filter at 1000 hours to ensure proper hydraulic flow to the drive motors. Check the 100% switchable front axle diff lock mechanism for smooth engagement, particularly in muddy agricultural conditions.
Overhaul & Rebuild Points
The 2000-hour service requires a full hydraulic oil change and tank cleaning to prevent valve contamination in the load-sensing system. Inspect the chassis and side frames for structural cracks, as the 406 Farm Master carries significant load over its 4.9-ton weight. Check brake disc wear and immersed brake condition, as these components are critical for safe operation on slopes. Replace injector spray patterns if diagnostic tools indicate poor atomization, ensuring the Kohler engine maintains its 170 Nm torque output.
Seasonal & Environment Servicing
In cold climates, verify the coolant mixture before winter to prevent freezing in the compact engine bay. Inspect the cab HVAC system at the 2000-hour interval to ensure defrosting capability for winter operation. In dusty agricultural environments, clean the air filter primary element frequently and replace it at 500 hours to protect the engine. Check the undercarriage and tire condition, specifically the 405/70 R18 tires, for wear patterns caused by abrasive farm surfaces or rocky terrain.
406 Farm Master common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/401102 | Kit-Element, Fuel Filter, Short | Fuel system service | Check fitment → |
| 02/130155 | Pipe, Assembly, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/130158 | Pipe, Assembly, Fuel, Filter To Heater | Fuel system service | Check fitment → |
| 02/130160 | Pipe, Fuel, L/Off Rail To Filter | Fuel system service | Check fitment → |
| 02/130234 | Pipe, Fuel Assembly, Inj/Pump To Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
406 Farm Master fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel Rail/System Pressure Too Low | Clogged fuel filters, weak lift pump, or failing pressure sensor. | Replace fuel filters and inspect the fuel lift pump and pressure sensor wiring. |
| P0191 | Fuel Rail Pressure Sensor Range/Performance | Failing fuel rail pressure sensor or erratic signal due to wiring issues. | Check sensor wiring harness for damage and test sensor resistance; replace if out of spec. |
| P20EE | SCR NOx Catalyst Efficiency Below Threshold | Poor quality AdBlue/DEF fluid, clogged DEF injector, or faulty NOx sensor. | Verify DEF fluid quality and level; inspect DEF injector and NOx sensor circuit. |
| P2201 | NOx Sensor Signal Out of Range (Bank 1) | Dirty, failing NOx sensor or damaged wiring harness. | Inspect NOx sensor connector for corrosion; test sensor signal and replace if faulty. |
| U0100 | Lost Communication with Engine Control Module (ECM) | CAN bus communication breakdown, loose connector, or low system voltage. | Check battery voltage and ground straps; inspect CAN bus wiring harness for damage. |
| U029D | Lost Communication With NOx Sensor 'A' | Broken wiring harness or corrosion at the NOx sensor connector. | Trace wiring from ECM to NOx sensor; repair or replace damaged harness sections. |
| P0117 | Engine Coolant Temperature Sensor Circuit Low Voltage | Faulty coolant temperature sensor or shorted wiring. | Test coolant temperature sensor resistance; inspect wiring for shorts to ground. |
| P0521 | Engine Oil Pressure Sensor Range/Performance Issue | Failing oil pressure sensor or low oil level/pressure. | Verify actual oil pressure with a mechanical gauge; replace sensor if pressure is normal. |
| P2047 | DEF/AdBlue Injector Circuit Open (SCR System Fault) | Open circuit in the DEF injector wiring or faulty injector solenoid. | Inspect injector connector and wiring for breaks; test injector solenoid resistance. |
| 101 | Low Transmission Clutch Pressure Detected | Low transmission fluid level, clogged filter, or faulty pressure sensor. | Check transmission fluid level and condition; replace filter if contaminated. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
406 Farm Master attachments & work tools
Standard Shovels & Buckets
Standard shovel capacity is 0.8 m³ (0.8 cubic yards). Brochure data indicates a maximum shovel capacity of 1.2 m³ (1.2 cubic yards) for specific configurations. The machine is described as a highly productive compact wheel loader with optimal power-to-weight ratio.
Quick Hitch Systems
The 406 is equipped with a hydraulic quickhitch system that allows the operator to change attachments without leaving the cab. This system supports a huge range of easily interchangeable attachments for the machine.
Agricultural Attachments
The Farm Master variant supports agricultural implements including grain pushers, grain shovels, bale handlers, and high-back bale spikes. The machine is categorized under agricultural tractors and machinery manuals in dealer catalogs.
Construction & Toolmaster Attachments
The Toolmaster model features a rear-mounted hydraulic handheld tool circuit for operating breakers, pumps, and disc cutters without additional powerpacks. The machine is also listed under construction equipment and earthmovers in dealer literature.
Hydraulic & Control Options
The Farm Master serial range (the OEM part reference to the OEM part reference) includes a 3-spool valve control for auxiliary hydraulics. The machine utilizes a joystick control system for intuitive operation of the hydrostatic transmission and attachments.
Axle & Traction Configurations
Axle options include open differentials for hard ground and limited slip differentials for soft, muddy terrain. A 100% switchable front axle differential lock is available to provide traction in mud without creating shear forces.
Engine & Powertrain
The machine is fitted with a 36.4 kW (49 hp) JCB Diesel by Rehlko or Kohler engine producing 170 Nm of torque. The powertrain consists of a 2-speed hydrostatic transmission and a heavy-duty center joint oscillating through ±40°.
Safety & Security Features
The 406 can be equipped with an immobiliser option to prevent theft. Safety features include recessed rear lights within the solid counterweight casting, three-point access steps, and a sloping rear bonnet for unimpeded view.
All 406 Farm Master assemblies by section
Every catalogued assembly group for the Jcb 406 Farm Master. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-3-1 Shovel, Clam, 6 In 1
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 51***00 | Shovel, Assembly; Use Either 51***00 0.5cu M 1750mm, Or 511/5, 3400 0.7cu M 1950mm Use Std. Jcb Teeth If Req | 1 |
| 51***01 | Tooth | 0 |
A1-2-5 Toeplate, Bolt-On, 1950mm (6'4") Wide
| 13***1Z | Nut | 15 |
| 14***2Z | Washer | 15 |
| 51***01 | Toeplate, 1950mm Wide, 15 Hole | 1 |
A1-1-1 Shovel, 0.6cu.M., 1220mm (4'0") Wide
| 51***00 | Shovel | 1 |
| 51***06 | Plate, Toe | 1 |
| 51***07 | Guide, Curved | 3 |
A1-3-3 Shovel, Clam, 6 In 1, 0.5cu.M., 1750mm (5'9") Wide
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 6 |
A1-2-2 Shovel, 0.6cu.M. 1750mm Wide, For Teeth Adaption
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 2 |
| 13***01 | Nut | 12 |
| 26***00 | Guard, Tooth | 1 |
A1-2-4 Toeplate, Bolt-On, 1750mm (5'9") Wide
| 13***1Z | Nut | 13 |
| 14***2Z | Washer | 13 |
| 51***01 | Toeplate, 1750mm Wide, 13 Hole | 1 |
A1-3-4 Shovel, Clam, 6 In 1, 0.7cu.M., 1950mm (6'4") Wide
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Bolt, M8 X 90mm Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 10 |
A1-2-1 Shovel, 0.6cu.M. 1220mm Wide, For Teeth Adaption
| 13***01 | Nut | 12 |
| 51***07 | Guide, Curved | 3 |
| 51***08 | Guide, Flat | 2 |
A1-4-1 Shovel, 0.8cu.M. 2000mm Wide, For Teeth Adaption
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***01 | Nut | 12 |
| 26***00 | Guard, Tooth | 1 |
A1-5-1 Guard, Tooth
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***1Z | Nut | 2 |
| 14***9Z | Washer | 2 |
A1-3-2 Shovel, Clam, 6 In 1
| 12***26 | Bush | 2 |
| 13***5Z | Bolt | 6 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A1-2-3 Shovel, 0.6cu.M. 1750mm Wide, For Teeth Adaption
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 2 |
| 13***01 | Nut | 14 |
| 26***00 | Guard, Tooth | 1 |
A2-1-2 Quickhitch
| 13***7Z | Bolt, M16 X 75mm | 2 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***3Z | Nut, M16 | 4 |
A2-1-1 Quickhitch
| 13***17 | Bolt | 2 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***21 | Bolt | 2 |
A2-2-2 Fork & Frame, Pallet
| 13***7Z | Bolt, M10x25 | 8 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 8 |
| 54***00 | Fork, Industrial, 100w X 45t X 1200l | 1 |
A2-2-1 Fork & Frame, Pallet
| 51***00 | Fork, Frame, Assembly | 1 |
| 51***01 | Frame | 1 |
| 51***02 | Lever, Assembly | 2 |
A2-7-1 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A2-3-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A2-4-1 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A2-1-3 Quickhitch
| 13***7Z | Bolt, M16 X 75mm | 2 |
| 13***0Z | Bolt, M16x100 | 2 |
| 13***3Z | Nut, M16 | 4 |
A2-5-1 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A2-9-1 Fork, Manure & Silage
| 98***00 | Grab, Manure/Silage | 1 |
| 98***01 | Fork, Tine | 0 |
| 98***05 | Pin | 2 |
A2-11-1 Bucket, Grain
| 98***00 | Shovel, Grain/Potatoe, 1750mm Wide | 1 |
A2-6-1 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A2-8-1 Crane Hook, & Mounting
| 99***00 | Attachment, Crane | 1 |
A2-10-1 Fork, Round Bale
| 54***02 | Fork, Tine | 1 |
| 54***03 | Fork, Tine, Long | 1 |
| 98***00 | Fork, Round Bale | 1 |
A2-1-5 Guard, Hose
| 13***3Z | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
| 26***00 | Guard, Quickhitch Hose | 1 |
B Bodywork,Cab,Loader End, Refurbishments
B1-7-5 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-14-1 Soundproofing, 'Q' Build
| 26***01 | Panel, Soundproofing, Engine Cover | 1 |
| 26***02 | Panel, Soundproofing, Engine Cover | 1 |
| 26***01 | Panel, Soundproofing | 2 |
B1-9-5 Fenders, Front & Rear, Hurth Axle
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 18 |
| 13***9Z | Screw, M10x35mm | 8 |
B1-5-1 Cover, Engine, Fibre Glass
| 10***03 | Wire, Retaining | 2 |
| 12***01 | Bracket | 2 |
| 12***00 | Latch, Claw | 1 |
B1-6-1 Tank, Diesel Fuel
| 12***00 | Cap, Filler, C/W Padlock Lug | 1 |
| 26***01 | Sender | 1 |
| 26***00 | Tank, Fuel | 1 |
B1-14-2 Soundproofing, 'Q' Build
| 26***03 | Panel, Soundproofing, Engine Cover | 1 |
| 26***01 | Panel, Soundproofing | 2 |
| 26***02 | Panel, Soundproofing | 1 |
B1-9-3 Fenders, Front & Rear, Jcb Axle
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 18 |
| 13***9Z | Screw, M10x35mm | 8 |
B1-13-1 Guards, Propshaft
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
B1-1-2 Chassis Front
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 2 |
| 13***2Z | Bolt, M24 X 240mm Long | 4 |
B1-8-2 Console
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-3-2 Centre Pivot, See Tsdb 382
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M20 X 100mm | 3 |
| 14***01 | Nipple, Grease, 90deg. Angle | 4 |
B1-5-3 Cover, Engine, Metal
| 13***8Z | Bolt | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-12-1 Soundproofing, Engine Cover, Metal
| 26***01 | Panel, Soundproof | 1 |
| 26***02 | Panel, Soundproof | 2 |
| 26***03 | Panel, Soundproof | 2 |
B1-7-1 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-4-3 Arms, Loader, & Linkage
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
B1-6-2 Tank, Diesel Fuel
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 6 |
| 14***5Z | Washer, Spring, M5 | 6 |
| 26***00 | Cap, Filler, With Chain | 1 |
B1-9-1 Fenders, Front & Rear
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 12 |
| 13***2Z | Bolt | 8 |
| 13***6Z | Bolt | 2 |
B1-11-1 Mounting, Front Lights
| 13***8Z | Bolt | 6 |
| 13***3Z | Nut | 6 |
| 26***00 | Bracket, Left Hand, Light Mounting | 1 |
B1-5-4 Cover, Engine, Metal
| 13***8Z | Bolt | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-5-2 Cover, Engine, Metal
| 13***2Z | Bolt | 4 |
| 13***4Z | Bolt, 3/8" | 4 |
| 13***2Z | Bolt | 2 |
B1-8-1 Console
| 13***6Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut | 11 |
B1-7-6 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-4-2 Arms, Loader, & Linkage
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***0Z | Bolt, M10 X 100 | 2 |
| 13***9Z | Bolt, M12x90mm | 1 |
B1-9-2 Fenders, Front
| 13***2Z | Bolt | 4 |
| 13***6Z | Bolt | 8 |
| 13***3Z | Nut | 16 |
B1-11-3 Mounting, Front Lights
| 13***7Z | Bolt, M10x25 | 4 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 4 |
| 24***09 | Grommet | 4 |
B1-2-1 Chassis Rear
| 13***14 | Bolt | 2 |
| 13***12 | Bolt | 2 |
| 13***14 | Bolt | 2 |
B1-8-3 Console
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-2-2 Chassis Rear, Jcb Axles
| 13***8Z | Screw, M6 X 30mm Long | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-8-4 Guards, Console, Heaterless Cabs
| 12***43 | Lug | 1 |
| 12***71 | Padlock | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
B1-11-2 Mounting, Front Lights
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 14***5Z | Washer, Spring - 5/16", Zinc Plated | 4 |
| 24***09 | Grommet | 4 |
B1-3-1 Centre Pivot, See Technial Info. Bulletin Tsdb 382
| 13***30 | Bolt, 3/4"Unf X 4" | 2 |
| 13***07 | Bolt, M8 X 25 | 4 |
| 13***0Z | Bolt, M20 X 100mm | 3 |
B1-13-2 Guard, Propshaft
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
B1-1-1 Chassis Front
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 4 |
| 13***8Z | Bolt | 2 |
| 13***48 | Bolt | 4 |
B1-7-2 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-7-4 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-12-2 Soundproofing, Engine Cover
| 26***02 | Panel, Soundproof | 2 |
| 26***03 | Panel, Soundproof | 2 |
| 26***07 | Panel, Soundproof | 1 |
B1-2-3 Chassis Rear
| 13***8Z | Screw, M6 X 30mm Long | 8 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B1-13-3 Guard, Propshaft
| 13***9Z | Screw, M10x35mm | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 6 |
B1-9-4 Fenders, Front & Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 18 |
| 13***9Z | Screw, M10x35mm | 8 |
B1-10-1 Remote Greasing
| 10***01 | Adapter | 2 |
| 13***1Z | Nut | 2 |
| 14***08 | Seal, Washer | 2 |
B1-4-4 Safety Strut
| 15***00 | Bolt | 1 |
| 26***00 | Strut, Safety, Arms Raised | 1 |
| 82***11 | Strip, Edging | 2 |
B1-4-5 Kit, Loader Arms
| 26***01 | Boss, Eye End, Loader Arms | 2 |
| 26***02 | Bar, Alignment | 1 |
| 80***03 | Bush | 2 |
B1-7-3 Tank, Hydraulic
| 12***00 | Cap | 1 |
| 12***01 | Seal | 1 |
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
B1-4-1 Arms, Loader, & Linkage
| 10***18 | Pin, Pivot | 1 |
| 10***16 | Pin, Pivot | 3 |
| 10***18 | Pin, Pivot | 1 |
B2-2-5 Door, Rear Side, Left & Right Hand, Catch Assembly
| 12***08 | Bush, Hinge | 4 |
| 13***3Z | Nut | 4 |
| 26***05 | Latch, Window, Lower Link | 2 |
B2-1-6 Cab
| 12***02 | Plate, Compression | 6 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***05 | Bolt, Closing | 2 |
B2-2-2 Door, Metal Frame, One Piece Glass
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
| 12***00 | Lock, Door, Left Hand | 1 |
B2-1-4 Soundproofing, Cab
| 26***01 | Panel, Soundproofing | 1 |
| 26***02 | Panel, Soundproofing | 1 |
| 26***01 | Panel, Soundproof, L.H. Side | 1 |
B2-3-1 Cab Glazing
| 12***09 | Cap, Nut M8; Replaces 69***72 | 1 |
| 12***01 | Washer | 1 |
| 12***02 | Stop, Window, 65mm Long | 1 |
B2-5-2 Seat, Suspension, Kab/Bostrom
| 13***05 | Capscrew, M8 X 20 | 4 |
| 40***00 | Seat, Suspension, Kab 411 | 1 |
| 40***01 | Seat, Assembly Upper; Nla | 1 |
B2-2-1 Door, All Glass
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Left Hand | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
B2-1-7 Canopy
| 12***02 | Plate, Compression | 2 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***5Z | Bolt | 19 |
B2-3-4 Cab Glazing, Two Piece Door
| 26***04 | Clamp | 4 |
| 26***02 | Clamp | 4 |
| 82***05 | Windscreen, Front,Laminated, Bronze,1042mm High | 1 |
B2-1-3 Cab
| 12***02 | Plate, Compression | 6 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***05 | Bolt, Closing | 2 |
B2-6-2 Mirror, Cab Mounted, Exterior
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
| 99***00 | Mirror, Unbreakable, Exterior | 2 |
B2-4-1 Seat, Static
| 13***5Z | Bolt | 8 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-1-5 Canopy
| 12***02 | Plate, Compression | 2 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***5Z | Bolt | 19 |
B2-3-3 Cab Glazing, Two Piece Door
| 26***04 | Clamp | 8 |
| 26***01 | Glazing, Rubber, Side Window, Left Hand | 1 |
| 26***01 | Glazing, Rubber, Side Window, Right Hand | 1 |
B2-3-2 Cab Glazing, One Piece Door
| 26***04 | Clamp | 8 |
| 26***02 | Glazing, Rubber, Door, Left Hand | 1 |
| 26***02 | Glazing, Rubber, Door, Right Hand | 1 |
B2-1-1 Cab Industrial
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***76 | Stay, Door, Lh | 1 |
B2-1-2 Cab Agricultral
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***76 | Stay, Door, Lh | 1 |
B2-2-4 Door, Rear Side, Left & Right Hand, Catch Assembly
| 12***08 | Bush, Hinge | 4 |
| 13***3Z | Nut | 4 |
| 26***05 | Latch, Window, Lower Link | 2 |
B2-2-3 Door, Metal Frame, Two Piece Glass
| 12***07 | Knob, Interior | 2 |
| 12***08 | Bush, Hinge | 4 |
| 12***00 | Lock, Door, Left Hand | 1 |
B2-2-6 Door, Metal Frame, Two Piece Glass
| 12***08 | Bush, Hinge | 4 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
B2-5-1 Seat, Suspension, Isringhausen
| 40***01 | Kit-Backrest, Fabric; Nla Use Cover Set 40/91***81. | 1 |
| 40***02 | Kit-Seat Assembly, Fabric (Seat Only), Cover And Cushion; Nla Removed By San 14113.06/11***03.W Charles, For Cover Set, Use 40/91***81. | 1 |
| 40***03 | Seat, Suspension Assembly | 1 |
B2-2-7 Latch, Door, Kit
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 21***00 | Kit-Latch, Door Retainer | 2 |
| 82***16 | Spacer, Door Catch | 2 |
B2-6-1 Mirror, Cab Mounted, Exterior
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
| 14***3Z | Washer | 8 |
B3-1-1 Labels
| 13***6Z | Bolt | 6 |
| 13***3Z | Nut | 6 |
| 14***1Z | Washer | 6 |
B3-2-1 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
B3-2-2 Tool Kit
| 12***01 | Strap | 2 |
| 27***00 | Bag, Tool | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
B3-1-2 Labels
| 13***6Z | Bolt | 6 |
| 13***3Z | Nut | 6 |
| 14***1Z | Washer | 6 |
B3-3-1 Paint
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B3-1-3 Labels
| 81***43 | Label, Lh Door | 1 |
| 81***44 | Label, Rh Door | 1 |
| 81***54 | Label, Lh Side Window | 1 |
B6-1-2 Homologation Parts, Italian
| 13***03 | Nut | 2 |
| 13***1Z | Nut, 4ba Plain | 4 |
| 14***9Z | Washer | 4 |
B6-1-3 Travel Struts
| 15***00 | Bolt | 2 |
| 26***00 | Bracket, Travel Strut, Lift Ram | 1 |
| 26***00 | Strut, Safety, Arms Raised | 1 |
B6-1-4 Travel Struts
| 15***00 | Bolt | 2 |
| 26***00 | Bracket, Support | 1 |
| 26***00 | Bracket, Support | 1 |
B6-1-1 Homologation Parts, German
| 10***01 | Spring, 24" Bungy | 1 |
| 12***01 | Strap | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
C Electrics-Machine,Cab & Engine
C1-2-2 Electrics Console
| 13***01 | Nut | 1 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut | 3 |
C1-6-1 Motor, Wiper, Front
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Wiper | 1 |
| 71***00 | Motor, Wiper | 1 |
C1-11-1 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 1 |
C1-10-2 Instrument Cluster
| 70***02 | Bezel | 1 |
| 70***03 | Glass | 1 |
| 70***04 | Seal | 1 |
C1-4-3 Light, Front
| 26***00 | Light, Assembly, R.H.Dip | 2 |
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
C1-4-1 Light, Front
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 2 |
C1-5-1 Battery & Fittings
| 10***00 | Clamp | 1 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-10-1 Instrument Cluster
| 70***00 | Cluster, Instrument | 1 |
| 70***08 | Seal | 1 |
| 70***16 | Bulb, 12v 1.2w | 15 |
C1-11-3 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 1 |
C1-11-2 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 1 |
C1-12-2 Speed Transducer
| 14***9Z | Washer | 1 |
| 26***02 | Bracket | 1 |
| 26***03 | Bracket | 1 |
C1-15-1 Installation, Shovel Reset
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 14 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 2 |
C1-12-1 Speed Transducer
| 14***9Z | Washer | 1 |
| 26***01 | Bracket | 1 |
| 26***02 | Bracket | 1 |
C1-14-1 Alarm, Reverse
| 13***3Z | Nut | 1 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 1 |
| 20***07 | Tie, Cable - 100mm Long | 6 |
C1-7-2 Motor, Wiper, Rear
| 15***03 | Cover | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Pantograph, 400mm Long | 1 |
C1-9-1 Light, Rear
| 70***03 | Spring | 1 |
| 70***00 | Lens; Replaced By Mss Use 70***00 3 Pin Or, 70***00 4 Pin. See San03938 | 1 |
| 70***00 | Light, Combination; Replaced By 70***26 + 72***18, See San12321 | 2 |
C1-1-3 Electrics Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***8Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
C1-8-1 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***01 | Tap | 1 |
| 13***6Z | Bolt | 4 |
C1-6-2 Motor, Wiper, Front
| 15***03 | Cover | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Wiper | 1 |
C1-4-2 Guards, Front Light, Optional
| 14***09 | Screw, Self Tapper, M8 X 2" Long | 8 |
| 26***00 | Guard, Headlight/Indicator | 2 |
C1-13-1 Light, Beacon, Hazard Warning, Standard & Optional
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Amber) | 1 |
| 70***01 | Lens, Amber, 146mm Dia | 1 |
C1-2-1 Electrics Console
| 13***3Z | Nut | 12 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 6 |
| 13***4Z | Screw | 1 |
C1-3-2 Electrics Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-10-3 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C1-5-2 Battery
| 10***00 | Clamp | 1 |
| 13***3Z | Nut | 2 |
| 14***1Z | Washer, Plain | 2 |
C1-3-1 Electrics, Cab
| 12***04 | Pad, Cable Tie Mounting, Self Adhesive | 6 |
| 13***3Z | Nut | 2 |
| 13***2Z | Screw, 2 B.A. X 1/2"; To Secure The Horizontal And Vertical Edges. Used To M602765 (926) And M608319 (930), Screw, 2 B.A. X 1/2" | 2 |
C1-1-1 Electrics Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 10 |
| 13***6Z | Bolt | 1 |
| 13***8Z | Bolt | 2 |
C1-8-2 Heater, Installation
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 12***01 | Tap | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
C1-1-2 Harness, Machine Electrics
| 71***00 | Harness, Engine Cover | 1 |
| 71***00 | Harness, Cab | 1 |
| 71***00 | Harness, Main | 1 |
C1-7-1 Motor, Wiper, Rear
| 25***03 | Jet, Screen Washer | 1 |
| 71***00 | Arm, Pantograph, 400mm Long | 1 |
| 71***00 | Motor, Wiper | 1 |
C2-4-1 Alternator Mountings
| 02***77 | Bush | 2 |
| 02***92 | Washer | 3 |
| 02***07 | Washer | 1 |
C2-3-2 Alternator, A127-65amp 12.Volt
| 02***19 | Pulley, Alternator, Twin Groove | 1 |
| 02***12 | Pulley, Alternator, D=86mm Single Groove | 1 |
| 71***00 | Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator, Alternator; Lucas Ref. 24158. Type Of Alternator Best Identified By Lucas Ref, Stamped On Body. | 1 |
C2-3-1 Alternator, A127-55amp 12.Volt
| 02***07 | Pulley, Alternator; Part N/A Use 1 Off Each 02/10***12 & 02/10***13 | 1 |
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
C2-5-1 Motor, Starter
| 12***06 | Cover, Solenoid | 1 |
| 13***8Z | Bolt | 3 |
| 13***1Z | Nut | 3 |
C2-3-3 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C2-4-2 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-5-2 Motor, Starter, M127 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
D Controls-Machine,Engine
D1-2-3 Control, 4 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***2Z | Bolt | 1 |
D1-2-2 Control, 4 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***2Z | Bolt | 1 |
D1-1-2 Control, 3 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***4Z | Bolt | 1 |
D1-1-3 Control, 3 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***00 | Bar, Locking | 1 |
| 13***4Z | Bolt | 1 |
D1-3-1 Control, Loader, Dump Switch, Transmission
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 26***00 | Lever, Loader Control | 1 |
| 26***00 | Lever, Loader Control | 1 |
D1-1-1 Control, 3 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***03 | Bracket | 1 |
| 12***00 | Bar, Locking | 1 |
D1-2-1 Control, 4 Spool Valve
| 11***16 | Joint, Universal | 1 |
| 12***02 | Cover | 1 |
| 12***00 | Bar, Locking | 1 |
D2-1-1 Control, Throttle
| 02***83 | Bracket, Control | 1 |
| 02***88 | Spring | 1 |
| 02***17 | Spring | 1 |
D3-1-1 Controls, Throttle & Stop, Ce Build
| 02***83 | Spring, Stop/Return | 1 |
| 02***04 | Adjuster | 1 |
| 02***55 | Spring | 1 |
D3-1-2 Controls, Throttle & Stop, Cm Build
| 02***63 | Pin | 1 |
| 13***5Z | Bolt | 3 |
| 13***2Z | Nut | 1 |
E Hydraulics
E1-2-3 Hose & Pipework, Main Hydraulics
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
| 14***7Z | Washer, Spring | 3 |
E1-1-2 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-1-1 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-5-2 Hose & Pipework, Loader End, 4 Spool
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-1-5 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 14***7Z | Washer, Spring | 2 |
E1-2-2 Hose & Pipework, 3 Spool
| 13***04 | Bolt | 5 |
| 14***02 | Washer | 5 |
| 14***05 | Washer; Replaces 82***03 | 3 |
E1-4-2 Hose & Pipework, Quickhitch
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
E1-2-1 Hose & Pipework, 3 Spool
| 13***02 | Bolt | 5 |
| 13***03 | Nut | 1 |
| 14***02 | Washer | 6 |
E1-4-1 Hose & Pipework, Quickhitch
| 65***32 | Pipe | 1 |
| 65***33 | Pipe | 1 |
| 81***64 | Adapter, Elbow - Male/Female | 2 |
E1-1-3 Cooler, Oil, Hydraulic, Installation
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-3-2 Hose & Pipework, Auxiliary Service
| 13***04 | Bolt | 7 |
| 13***03 | Nut | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-3-1 Hose & Pipework, Auxiliary Service
| 13***02 | Bolt | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***02 | Washer | 2 |
E1-5-1 Hose & Pipework, Loader End, 3 Spool
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 8 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
E1-1-4 Circuit, Neutral, 3 & 4 Spool Valves
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***29 | Seal, Dowty | 2 |
| 14***7Z | Washer, Spring | 2 |
E2-3-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***8Z | Bolt | 4 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 1 |
| 13***3Z | Nut, M12 | 2 |
E2-1-1 Pump, Main Hydraulic
| 20***03 | Key; Replaced By 20/20***06, See San05154 | 1 |
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
| 20***05 | Nut; Replaced By 20/20***06, See San05154 | 1 |
E2-1-2 Pump, Main Hydraulic
| 20***04 | Washer, Tab; Replaced By 20/20***06, See San05154 | 1 |
| 20***05 | Nut; Replaced By 20/20***06, See San05154 | 1 |
| 20***01 | Kit-Seal | 1 |
E2-2-1 Pump, Main Hydraulic, Fittings & Mountings
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 1 |
E2-2-2 Pump, Main Hydraulic, Fittings & Mountings
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***7Z | Bolt, M16 X 75mm | 1 |
E3-4-4 Valve, Control, Adapters
| 14***18 | Seal, Bonded, 1/2" Bsp | 10 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***04 | Adapter, Male/Male | 3 |
E3-3-1 Valve, Section, Components, Float Spool
| 25***07 | Capscrew | 2 |
| 25***27 | Plate, Seal Retainer | 1 |
| 25***36 | Valve, Poppet | 1 |
E3-4-1 Valve, Control, Adapters 3 & 4 Spool
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E3-3-3 Valve, Section, Kick-Out Detent, Restricted Motor
| 25***27 | Plate, Seal Retainer | 3 |
| 25***28 | Seal, Wiper | 1 |
| 25***29 | O Ring | 2 |
E3-3-4 Valve, Section, Components, Float Spool
| 25***07 | Capscrew | 2 |
| 25***27 | Plate, Seal Retainer | 1 |
| 25***32 | Spring; Note 3. Stronger Spring Used For Sway, Spring | 1 |
E3-5-1 Lubricants & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***42 | Element, Oil Filter | 1 |
| 32***02 | Kit-Element, Fuel Filter, Short | 1 |
E3-1-1 Valve, Control
| 25***01 | Rod, Tie | 3 |
| 25***01 | Rod, Tie | 3 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-3-2 Valve, Section, Kick-Out Detent, Restricted Motor
| 25***27 | Plate, Seal Retainer | 3 |
| 25***28 | Seal, Wiper | 1 |
| 25***29 | O Ring | 2 |
E3-4-3 Valve, Control, Adapters 4 Spool
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E3-3-5 Valve, Section, Components Standard
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 1 |
| 25***31 | Spacer | 1 |
E3-2-1 Valve, Section, Components Standard
| 25***27 | Plate, Seal Retainer | 2 |
| 25***30 | Seat, Spring | 1 |
| 25***31 | Spacer | 1 |
E3-1-4 Valve, Control, Shovel Reset
| 25***00 | Valve, Assembly, 3 Spool, Shovel Reset | 1 |
| 25***00 | Valve, Assembly, 4 Spool, Shovel Reset | 1 |
E3-1-3 Valve, Control, Shovel Reset
| 25***00 | Valve, Assembly, 3 Spool, Shovel Reset | 1 |
| 25***00 | Valve, Assembly, 4 Spool, Shovel Reset | 1 |
E3-1-2 Valve, Control
| 25***01 | Rod, Tie | 3 |
| 25***01 | Rod, Tie | 3 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 0 |
E3-4-2 Valve, Control, Adapters 3 Spool
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E4-3-2 Ram, Clamshovel, 6 In 1
| 12***06 | Bush, Spring Steel | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***02 | O Ring | 1 |
E4-4-1 Seal Kit, Steer Ram
| 23***02 | O Ring | 1 |
| 23***04 | O Ring | 1 |
| 24***02 | Seal, Gland | 1 |
E4-1-4 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
E4-2-4 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-2-2 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-1-1 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 24***18 | O Ring | 1 |
E4-1-2 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
E4-1-3 Ram, Lift
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 23***06 | O Ring, 60 X 5.0 | 1 |
E4-3-1 Ram, Clamshovel, 6 In 1
| 24***18 | O Ring | 1 |
| 54***00 | Ram, Assembly; 25mm Dia Pivot Pins. Earlier Type Ram May Be Identified By Wire Clip In End Cap, Later Version Is Screwed., Ram, Assembly | 2 |
| 54***01 | Cylinder | 1 |
E4-2-1 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 24***18 | O Ring | 1 |
E4-5-1 Seal Kit, Steer Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-2-3 Ram, Bucket
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 24***18 | O Ring | 1 |
F Axles,Wheels & Transmission
F1-1-4 Hub & Components
| 13***07 | Bolt | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Carrier, Annulus | 2 |
F1-2-3 Differential, Assembly, Limited Slip
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***07 | Gear, Pinion; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. Lsd 2 Pinion 44***00 | 2 |
F1-6-2 Axle Drive Head, 440/06600, 440/06700
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 44***00 | Gear, Crown Wheel & Pinion, 3.636:1 (11t/40t); Replaced By 45***21, See San 10680 | 1 |
| 44***01 | Casing, Outer | 1 |
F1-6-1 Axle Drive Head, 440/01400, 440/02000
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 44***01 | Casing, Outer | 1 |
| 44***00 | Yoke | 1 |
F1-5-1 Axle Assembly, Jcb Axle
| 10***01 | Nut | 20 |
| 13***7Z | Bolt, Coated | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-4-2 Propshafts, Transmission, See F1-4-8
| 11***25 | Strap | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-1-7 Axle Assembly, Front & Rear
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 26***00 | Plate, Sensor | 1 |
| 41***01 | Gasket, Multi | 0 |
F1-3-1 Differential, Components, Hurth
| 10***44 | Bolt | 2 |
| 10***45 | Washer, Tab | 2 |
| 10***46 | Bolt | 12 |
F1-4-1 Propshafts, Hurth Axle
| 11***01 | Strap, Bearing | 4 |
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt | 12 |
F1-2-1 Differential, Casing & Covers, Hurth
| 10***30 | O Ring | 4 |
| 10***31 | Housing, Intermediate; Was 171.01.003.04 D.Jackson 17/02/09 | 1 |
| 10***32 | O Ring | 2 |
F1-2-2 Axle Drive Head
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
F1-7-1 Differential, Assembly, Jcb Axle
| 13***6Z | Bolt, M8 X 70 | 8 |
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Differential, Assembly | 1 |
F1-5-2 Axle Assembly, Jcb Axle
| 13***7Z | Bolt, Coated | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 22***41 | Circlip | 6 |
F1-4-7 Propshafts, Jcb Axle
| 11***24 | Strap, Bearing | 4 |
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt, 1/2" X 1.1/4" Long | 4 |
F1-1-3 Axle, Drive Head, 3.875 : 1
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***06 | Gear; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. | 2 |
F1-4-9 Hub & Components
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Pin, Hexagon Head | 4 |
F1-1-1 Axle Assembly
| 10***00 | Axle, Complete, Standard Diff | 2 |
| 10***01 | Housing | 2 |
| 10***02 | Bolt | 4 |
F1-1-2 Axle Assembly, Front & Rear
| 10***01 | Nut | 32 |
| 13***08 | Bolt | 12 |
| 13***09 | Bolt, M10 X 35 | 12 |
F1-4-4 Propshafts, Transmission, See F1-4-7
| 11***25 | Strap | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-8-1 Differential, Assembly, Limited Slip, Jcb Axle
| 13***15 | Screw | 8 |
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Differential, Limited Slip | 1 |
F1-4-8 Propshafts, Transmission
| 11***25 | Strap | 4 |
| 13***7Z | Bolt | 8 |
| 13***8Z | Bolt | 4 |
F1-4-3 Propshafts, Jcb Axle, See F1-4-7
| 11***24 | Strap, Bearing | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-3-2 Differential, Components, Limited Slip, Hurth Axle
| 10***44 | Bolt | 2 |
| 10***45 | Washer, Tab | 2 |
| 10***46 | Bolt | 12 |
F1-4-5 Propshafts, Transmission, See F1-4-8
| 11***25 | Strap | 4 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 4 |
F1-1-6 Axle Assembly, Front & Rear
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 26***00 | Plate, Sensor | 1 |
| 41***01 | Gasket, Multi | 0 |
F1-1-5 Axle, Drive Head, 3.875 : 1, Limited Slip Differential
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***07 | Gear, Pinion; Use 45***00 4 Pinion Diff. Or Use 44***00, 2 Pinion Diff. Lsd 2 Pinion 44***00 | 2 |
F2-8-2 Hose & Pipework, Oil Cooler, Transmission
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F2-3-3 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F2-6-2 Transmission, Mounting
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***6Z | Bolt, M16 X 70mm | 2 |
F2-3-2 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
| 44***15 | Seal, Ring | 4 |
F2-5-2 Torque Converter, Drive Plate, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F2-3-5 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F2-1-2 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F2-6-1 Transmission, Mounting
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
F2-3-1 Clutch Reverser Unit
| 13***02 | Plug, Blanking | 2 |
| 22***57 | Circlip, External | 4 |
| 22***94 | Circlip | 2 |
F2-1-4 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F2-2-2 Gear Assemblies
| 13***05 | Bolt | 1 |
| 44***03 | Sleeve | 2 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F2-8-3 Hose & Pipework, Oil Cooler, Transmission
| 13***7Z | Bolt | 1 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
F2-3-6 Clutch Reverser Unit, Service Supply, 10/2003 Onwards
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
| 44***02 | Plate, Friction | 10 |
F2-2-1 Gear Assemblies
| 13***05 | Bolt | 2 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F2-4-2 Gear Change
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
F2-5-1 Torque Converter, Drive Plate, & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***00 | Converter, Torque | 1 |
F2-4-4 Gear Change
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
F2-8-1 Hose & Pipework, Oil Cooler, Transmission
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F2-3-4 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
| 44***02 | Plate, Friction | 10 |
F2-8-4 Hose & Pipework, Oil Cooler, Transmission
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F2-4-3 Gear Change
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
| 12***17 | Top, Control Knob | 1 |
F2-4-1 Gear Change
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
F2-1-3 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F2-1-1 Gearbox
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***07 | Bolt | 4 |
F3-1-1 Transmission, Drop Box
| 05***00 | Gearbox, Drop, Complete | 1 |
| 05***01 | Housing, Main | 1 |
| 05***02 | Gear, Outer | 2 |
F3-1-2 Transmission, Drop Box
| 05***00 | Gearbox, Drop, Complete | 1 |
| 05***01 | Housing, Main | 1 |
| 05***02 | Gear, Outer | 2 |
F4-3-1 Wheels & Tyres
| 15***00 | Valve | 1 |
| 15***01 | Valve | 1 |
| 26***00 | Wheel, Assembly,12.5-18mpt10ply, Continental | 4 |
F4-4-1 Wheels & Tyres
| 15***01 | Valve | 1 |
| 26***00 | Wheel, Assembly 14.5-20 10pr, Continental | 4 |
| 26***00 | Wheel, Assembly 14.5-20 10pr, Continental | 4 |
F4-2-1 Wheels & Tyres, 406 Farm Master
| 15***00 | Valve | 1 |
| 15***01 | Valve | 1 |
| 26***00 | Wheel, & Tyre Assembly, As Farmer Contin'Tl | 4 |
F4-1-1 Wheels & Tyres, 406 Industrial
| 26***00 | Wheel, & Tyre Assembly, E58 Continental | 4 |
| 26***00 | Wheel, & Tyre Assembly, E58 Continental | 1 |
| 26***00 | Wheel, & Tyre Assembly, E58 Continental | 4 |
F6-5-1 Layshaft Components, Powershift Transmission
| 13***7Z | Bolt, Coated | 4 |
| 22***15 | Circlip | 1 |
| 44***13 | Spacer | 1 |
F6-7-2 Pipework, Powershift Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 44***00 | Manifold, 4 Way | 1 |
F6-8-2 Torque Converter, 2.4 : 1 Ratio, Drive Plate & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F6-3-1 Clutch, Reverse, Powershift Transmission
| 13***5Z | Bolt | 4 |
| 22***15 | Circlip | 2 |
| 44***09 | Washer, Thrust | 2 |
F6-4-1 Mainshaft Components, Powershift Transmission
| 22***15 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
| 44***05 | Plate, Friction | 9 |
F6-1-2 Transmission, Powershift, External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 15 |
F6-7-1 Pipework, Powershift Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***17 | Adapter, 5/8" X 1/2" M/M | 2 |
F6-8-1 Torque Converter, 2.4 : 1 Ratio, Drive Plate & Transmission Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***00 | Converter, Torque | 1 |
F6-1-1 Transmission, Powershift, External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt | 15 |
F6-2-1 Clutch, Input, Powershift Transmission
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 6 |
F6-10-1 Transmission, Mounting
| 13***7Z | Bolt, M10x25 | 4 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***6Z | Bolt, M16 X 70mm | 2 |
F6-6-1 Switch, Solenoid, Powershift Transmission
| 13***8Z | Bolt | 14 |
| 13***1Z | Bolt, M8 X 45; Replaced By 13***1z, See San05502 | 2 |
| 13***0Z | Bolt | 1 |
G Brakes
G1-6-1 Brakes, Jcb Axle
| 44***05 | Piston, Brake | 2 |
| 44***06 | Plate, Friction, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Nla Use 44***21 With 44***20 In Axle Sets. 44***21 Must Be Used With 44***20 In Complete Axle Sets. See Ti 057 (G19/N.Am), Plate, Friction, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1 | 6 |
| 44***07 | Plate, Counter, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Nla Use 44***20 With 44***21 In Axle Sets. 44***20 Must Be Used With 44***21 In Complete Axle Sets. See Ti 057 (G19/N.Am), Plate, Counter, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Plate, Counter, Brake; Use 44***19 And 44***20 In Complete Axle, Sets To Suit Machine Type. But Not 2cx Mk 1, Nla. Use 44***20 With 44***21 In Axle Set. 44***20 Must Be Used With 44***21 In Complete Axle Sets. See Ti 057 (G19/N.Am) | 8 |
G1-1-2 Brake, System, Hurth Axle
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***4Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
G1-1-3 Brake, System
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 8 |
G1-3-1 Brake, Parking
| 13***10 | Bolt | 2 |
| 13***07 | Bolt | 3 |
| 13***04 | Nut | 2 |
G1-4-2 Brake, Parking, Control
| 12***03 | Gaiter, Brake Lever | 1 |
| 13***8Z | Bolt | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
G1-4-1 Brake, Parking, Control
| 12***03 | Gaiter, Brake Lever | 1 |
| 13***06 | Bolt | 2 |
| 13***02 | Nut | 1 |
G1-1-1 Brake, System
| 13***16 | Bolt | 4 |
| 13***03 | Nut | 3 |
| 14***02 | Washer | 3 |
G1-3-3 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***03 | Nut | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
G1-2-3 Brake Pedal, & Master Cylinder
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***01 | Cap | 1 |
G1-2-4 Brake, Master Cylinder
| 15***00 | Cylinder, Master | 1 |
| 15***01 | Kit-Seal | 1 |
| 15***02 | Circlip | 1 |
G1-1-4 Brake, System, Jcb Axle
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 5 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 8 |
G1-3-4 Brake, Parking
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
G1-2-2 Brake Pedal, & Master Cylinder
| 12***01 | Filter | 1 |
| 12***00 | Cap, Reservoir | 1 |
| 12***01 | Cap | 1 |
G1-2-1 Brake Pedal, & Master Cylinder
| 12***00 | Reservoir | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***2Z | Bolt | 2 |
G1-3-2 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***07 | Bolt | 3 |
| 13***04 | Nut | 2 |
G1-5-2 Brake, Axle
| 22***45 | Circlip | 2 |
| 45***11 | Plate, Friction; Replaced By Nla. 45***4a + 45***6a Or, (45***1a 2cx 2dx Build) | 6 |
| 45***06 | Piston, Brake; Replaced 45***10, See San06472 | 2 |
G1-5-1 Brakes, Hurth Axle
| 10***75 | Bolt, Adjusting | 6 |
| 10***76 | Spring | 6 |
| 10***77 | O Ring | 6 |
H Steering
H1-6-2 Valve, Priority, Fittings & Adapters
| 13***4Z | Bolt | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-3-4 Ram, Steering
| 14***01 | Washer, Aluminium | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
| 55***00 | Ram, Complete | 1 |
H1-4-2 Valve Adapters, Steering
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
H1-3-1 Ram, Steering
| 14***01 | Washer, Aluminium | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
| 24***06 | O Ring | 1 |
H1-3-3 Ram, Steering
| 14***01 | Washer, Aluminium | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
| 55***00 | Ram, Complete | 1 |
H1-6-1 Valve, Priority, Fittings & Adapters
| 13***4Z | Bolt | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-5-3 Valve, Priority, Fittings & Adapters, Hurth Axled Machines
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***3Z | Capscrew | 2 |
| 14***11 | Seal, Bonded | 1 |
H1-4-3 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-2-1 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
H1-4-6 Valve Adapters, Steering
| 13***3Z | Bolt, M10 X 16 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
H1-4-1 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-4-4 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-3-2 Ram, Steering
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 24***10 | O Ring | 1 |
H1-5-1 Valve, Priority
| 35***00 | Valve, Priority | 1 |
| 35***01 | Spring | 1 |
| 35***03 | Plug | 1 |
H1-2-2 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
H1-5-2 Valve, Priority
| 35***00 | Valve, Priority | 1 |
| 35***01 | Seal | 2 |
| 35***00 | Valve, Priority | 1 |
H1-4-5 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
| 35***08 | Ball | 1 |
H1-1-2 Hose & Pipework, Steering
| 61***00 | Hose, 1/4bsp X 1680 | 1 |
| 61***00 | Hose, 1/4"Bsp X 1890mm | 1 |
| 61***00 | Hose, 3/8"Bsp X 1050mm; Use With Quick-Hitch. 6 In 1 Shovel. Not Applicable To Usa Builds, Hose, 3/8"Bsp X 1050mm | 2 |
H1-1-3 Hose & Pipework, Steering
| 61***00 | Hose, 1/4"Bsp X 1890mm | 1 |
| 61***00 | Hose, 3/8"Bsp X 1050mm; Use With Quick-Hitch. 6 In 1 Shovel. Not Applicable To Usa Builds, Hose, 3/8"Bsp X 1050mm | 2 |
| 61***00 | Hose | 1 |
H1-1-1 Hose & Pipework, Steering
| 13***3Z | Nut, Lock, M10 | 2 |
| 13***13 | Capscrew | 2 |
| 14***11 | Seal, Bonded | 1 |
L Engines D3.152 Series
L1-7-1 Flywheel & Housing, Ce & Cm Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 6 |
| 02***29 | Housing, Flywheel | 1 |
L1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Cm Build
| 02***13 | Rod, Connecting | 3 |
| 02***15 | Bolt | 2 |
| 02***16 | Nut | 2 |
L1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ce Build
| 02***12 | Crankshaft, Assembly | 1 |
| 02***13 | Rod, Connecting | 3 |
| 02***15 | Bolt | 2 |
L1-6-1 Timing Case, Camshaft & Gears, Ce Build
| 02***37 | Cap, Oil Filler | 1 |
| 02***07 | Camshaft | 1 |
| 02***91 | Plug, Oil Drain | 1 |
L1-8-1 Engine Mountings
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 6 |
| 13***6Z | Bolt | 2 |
L1-6-2 Timing Case, Camshaft & Gears, Cm Build
| 02***37 | Cap, Oil Filler | 1 |
| 02***82 | Plug, Oil Drain | 1 |
| 02***14 | Screw | 3 |
L1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Ce Build
| 02***13 | Rod, Connecting | 3 |
| 02***15 | Bolt | 2 |
| 02***16 | Nut | 2 |
L1-2-2 Engine, Short, Cm Build
| 02***10 | Plug | 1 |
| 02***69 | Plug | 2 |
| 02***90 | Engine, Short | 1 |
L1-5-1 Fans, Pulleys, & Fan Belt, Ce & Cm Builds
| 02***39 | Washer | 1 |
| 02***27 | Belt, Fan, Pair | 1 |
| 02***86 | Bolt | 1 |
L1-1-2 Engine, Complete, Cm Build
| 01***00 | Engine, Complete, D3.152, Nat/Aspirated, 49bhp | 1 |
L1-1-1 Engine, Complete, Ce Build
| 01***00 | Engine, Complete D3.152, Nat/Aspirated, 46bhp | 1 |
L1-2-1 Engine, Short, Ce Build
| 02***10 | Plug | 1 |
| 02***69 | Plug | 2 |
| 02***70 | Engine, Short | 1 |
L1-3-1 Block Assembly, Ce Build
| 02***05 | Plug, Core, D=32mm | 4 |
| 02***23 | Switch, Oil Pressure | 1 |
| 02***32 | Plug, Drain | 1 |
L1-3-2 Block Assembly, Cm Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***32 | Plug, Drain | 1 |
| 02***96 | Plug, Core, D=32mm | 5 |
L2-2-2 Rocker Assembly, Push Rods & Tappets, Cm Build
| 02***52 | Plug, Core, D=11mm | 2 |
| 02***57 | Union | 1 |
| 02***03 | Nut, Lock | 6 |
L2-2-1 Rocker Assembly, Push Rods & Tappets, Ce Build
| 02***52 | Plug, Core, D=11mm | 2 |
| 02***57 | Union | 1 |
| 02***03 | Nut, Lock | 6 |
L2-3-1 Rocker Cover, Ce & Cm Builds
| 02***59 | Stud | 1 |
| 02***97 | Washer | 2 |
| 02***98 | Nut | 2 |
L2-1-2 Cylinder Head, Cm Build
| 02***95 | Plug, Taper | 2 |
| 02***73 | Gasket | 1 |
| 02***62 | Valve, Exhaust | 3 |
L2-1-1 Cylinder Head, Ce Build
| 02***95 | Plug, Taper | 2 |
| 02***73 | Gasket | 1 |
| 02***60 | Head, Cylinder Assembly | 1 |
L2-4-1 Lifting Plates, Engine, Ce & Cm Builds
| 02***76 | Plate, Lifting | 1 |
| 02***77 | Stud | 2 |
| 02***78 | Plate, Lifting | 1 |
L3-2-1 Manifold, Exhaust, Ce & Cm Builds
| 02***51 | Nut | 3 |
| 02***07 | Gasket | 1 |
| 02***08 | Plate, Blanking | 1 |
L3-1-1 Manifold, Induction, Ce & Cm Build
| 02***05 | Manifold, Induction | 1 |
| 02***06 | Gasket | 1 |
| 13***0Z | Bolt | 7 |
L3-3-2 Filter, Air, Rotopamic, Optional
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 1 |
| 13***6Z | Bolt | 2 |
L3-4-1 Silencer & Extension
| 02***51 | Nut | 3 |
| 02***07 | Gasket | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
L3-3-1 Filter, Air
| 13***8Z | Bolt | 4 |
| 13***0Z | Bolt | 1 |
| 13***6Z | Bolt | 1 |
L3-3-3 Filter, Pre-Cleaner, Optional
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 3 |
| 26***00 | Panel, Mounting | 1 |
| 26***00 | Panel, Mounting | 1 |
L3-4-2 Silencer & Extension, 'Q'Build
| 02***51 | Nut | 3 |
| 02***07 | Gasket | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 1 |
L4-2-1 Thermostat, Housing, Inlet & Outlet, Ce & Cm Builds
| 02***71 | Thermostat | 1 |
| 02***95 | Plug, Taper | 1 |
| 02***45 | Kit-Hose, By-Pass | 1 |
L4-3-2 Radiator, Fittings & Mountings, Ce Build
| 13***4Z | Bolt | 4 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 3 |
L4-4-2 Radiator, Hoses & Pipework, Ce & Cm Builds
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
L4-4-1 Radiator, Hoses & Pipework, Ce Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
L4-1-1 Pump, Water, Ce & Cm Builds
| 02***72 | Gasket | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
| 02***44 | Bolt | 1 |
L4-3-1 Radiator, Fittings & Mountings, Ce Build
| 13***8Z | Bolt | 8 |
| 13***3Z | Nut | 4 |
| 14***3Z | Washer | 8 |
L4-3-3 Radiator, Fittings & Mountings, Ce & Cm Builds
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***3Z | Bolt, M10 X 16 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
L5-1-1 Sump, Oil, Ce & Cm Builds
| 02***16 | Nut | 1 |
| 02***20 | Olive | 1 |
| 02***66 | Seal | 1 |
L5-2-1 Pump, Oil, Ce & Cm Builds
| 02***64 | Plunger | 1 |
| 02***65 | Spring | 1 |
| 02***16 | Nut | 2 |
L5-4-1 Filter, Oil, & Oil Feed Pipes, Ce & Cm Builds
| 02***48 | Elbow | 2 |
| 02***11 | Washer | 2 |
| 02***36 | Washer, Seal | 2 |
L6-5-1 Pump, Fuel Lift, Ce & Cm Builds
| 02***80 | Gasket | 1 |
| 02***04 | Nut | 4 |
| 02***86 | Washer | 4 |
L6-3-2 Fuel System, Cm Build
| 02***97 | Bolt | 2 |
| 02***17 | Nut | 3 |
| 02***18 | Nut | 5 |
L6-3-1 Fuel System, Ce Build
| 02***95 | Valve, Non-Return | 1 |
| 02***97 | Bolt | 3 |
| 02***17 | Nut | 4 |
L6-4-1 Filter, Fuel, Ce & Cm Builds
| 13***5Z | Bolt | 2 |
| 14***2Z | Washer | 2 |
| 14***5Z | Washer, Spring - 5/16", Zinc Plated | 2 |
L6-6-1 Filter, Fuel Sediment, Ce Build
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
L6-2-1 Injectors, Fuel, & Injection Pipes, Ce Build
| 02***53 | Washer | 3 |
| 02***81 | Washer | 6 |
| 02***87 | Damper, Vibration | 4 |
L6-1-1 Pump, Fuel Injection, Ce Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***02 | Sleeve | 1 |
L6-6-2 Filter, Fuel Sediment, Ce & Cm Builds
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
L6-2-2 Injectors, Fuel, & Injection Pipes, Ce Build
| 02***53 | Washer | 3 |
| 02***81 | Washer | 6 |
| 02***87 | Damper, Vibration | 4 |
L6-2-3 Injectors, Fuel, & Injection Pipes, Cm Build
| 02***53 | Washer | 3 |
| 02***81 | Washer | 6 |
| 02***87 | Damper, Vibration | 4 |
L6-1-2 Pump, Fuel Injection, Cm Build
| 02***76 | Gasket | 1 |
| 02***58 | Stud | 3 |
| 02***19 | Gear, Injection Pump | 1 |
L8-1-2 Gasket Sets, Cm Build
| 02***66 | Kit-Gasket, Bottom | 1 |
| 02***05 | Kit-Gasket, Top | 1 |
L8-1-1 Gasket Sets, Ce Build
| 02***72 | Kit-Gasket, Top | 1 |
| 02***73 | Kit-Gasket, Bottom | 1 |
N Engine 1004-4 Series
N1-8-1 Engine Mountings, Aa Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N1-3-1 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***07 | Plug, Core, D=50mm | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa Build
| 02***79 | Screw | 3 |
| 02***14 | Pulley, Fan Drive | 1 |
| 02***16 | Spacer, Fan, 13mm | 1 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated, 60bhp | 1 |
N1-7-1 Flywheel & Housing, Aa Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***14 | Washer | 6 |
N1-6-1 Timing Case, Camshaft & Gears, Aa Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***42 | Plate | 1 |
N2-3-1 Rocker Cover, Aa Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N2-2-3 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***30 | Lever, Rocker, Left Hand | 4 |
N2-4-1 Lifting Plates, Engine, Aa Build
| 02***13 | Plate, Lifting | 1 |
| 02***37 | Bolt | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-3-3 Rocker Cover, Aa Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
N3-3-3 Filter, Pre-Cleaner, Optional
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 3 |
| 26***01 | Plate, Blanking | 1 |
| 26***00 | Panel, Mounting | 1 |
N3-3-1 Filter, Air, Aa Build
| 13***0Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Screw, M10x35mm | 2 |
N3-4-1 Silencer & Extension, Aa Build
| 13***7Z | Bolt, M10x25 | 3 |
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***0Z | Bolt, M10 X 40 | 3 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***03 | Stud | 3 |
N3-3-5 Filter, Air, Rotopamic, Optional
| 13***6Z | Bolt, 5/16"Unf X 1" Long | 4 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
N3-4-2 Silencer & Extension, 'Q'Build
| 13***7Z | Bolt, M10x25 | 7 |
| 13***2Z | Bolt, M10 X 120 | 1 |
| 13***3Z | Nut, Lock, M10 | 6 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa Build
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***44 | Housing, Thermostat | 1 |
N4-1-1 Pump, Water, Aa Build
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***84 | Seal | 1 |
N4-3-1 Radiator, Fittings & Mountings, Aa Build
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M10 X 16 | 2 |
N4-4-1 Radiator, Hoses & Pipework, Aa Build
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
N5-4-1 Filter, Oil, Aa Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***61 | Shaft, Idler, Oil Pump | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N5-4-2 Filter, Oil, Aa Build
| 02***23 | Switch, Oil Pressure | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
N5-1-1 Sump, Oil, & Fittings, Aa Build
| 02***60 | Gasket, Oil Sump | 1 |
| 02***66 | Bracket | 1 |
| 02***26 | Spacer | 1 |
N6-6-1 Filter, Fuel Sediment, Aa Build
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
N6-8-1 Pump, Fuel Lift, Aa Build
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-6-2 Filter, Fuel Sediment, Aa Build
| 32***02 | Nut, Cap | 1 |
| 32***03 | Washer, Nylon Seal, M6 | 1 |
| 32***06 | Filter, Swirl Cone | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***49 | Clip | 1 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***33 | Sleeve | 1 |
N6-7-1 Filter, Fuel, Aa Build
| 02***52 | Bracket, Mounting | 1 |
| 02***35 | Bolt | 2 |
| 02***37 | Bolt | 2 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-4-1 Fuel Pipes, Tank To Fuel Filter, Aa Build
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N8-1-1 Gasket Sets, Aa Build
| 02***14 | Kit-Gasket, Top | 1 |
| 02***51 | Kit-Gasket, Bottom | 1 |
| 02***74 | Kit-Gasket, Top | 1 |
406 Farm Master serial number reference
For pre-2001 JCB machines like the 406 Farm Master, the serial number is a 7-digit internal identifier without ISO-standard year or plant codes. The identification plate is typically riveted inside the cab on the right-hand pillar or dash console, with a duplicate serial stamped into the main chassis frame near the loader-arm tower. Verify applicability with a JCB dealer using the machine identification plate.
| Prefix | Identifies | Notes |
|---|---|---|
| 00630001-00632699 | JCB 406 Farm Master wheel loader; production years 1988–1994; applies to the base 406 model family as documented in the parts catalog manual. | Serial range verified against parts catalog documentation for the 406 Farm Master. Pre-2001 machines use 7-digit internal serials without ISO-standard year or plant codes. Identification plate is typically riveted inside the cab on the right-hand pillar or dash console, with a duplicate serial stamped into the main chassis frame near the loader-arm tower. Verify applicability with a JCB dealer using the machine identification plate. |
Frequently asked questions
What engine does the JCB 406 Farm Master use?
The JCB 406 Farm Master uses a JCB Diesel by Kohler engine, producing 36.4 kW (49 hp) of power and 170 Nm of torque.
What is the operating weight of the JCB 406 Farm Master?
The operating weight varies by configuration, ranging from 4,790 kg to 5,020 kg.
What model replaced the JCB 406 Farm Master?
The JCB 406 was succeeded by the 407, 408, and 409 Wheel Loading Shovel series.
What 406 Farm Master owners discuss
What engine powers the JCB 406 Farm Master and what are its key specifications?
The JCB 406 Farm Master is powered by a JCB Diesel by Kohler engine, specifically the KDI 2504 M series. This is a 4-stroke mechanical injection diesel engine. The engine produces a maximum power of 36.4 kW (49 hp) and generates 170 Nm of torque. The power-to-weight ratio is optimized for tool carrier applications.
How does the hydrostatic transmission behave and what are common powertrain issues?
The machine utilizes a 2-speed hydrostatic transmission. Operators note that the hydrostatic drive makes the unit easy to operate, even for inexperienced users. A common powertrain symptom is loss of forward drive while reverse remains functional. This is often caused by electrical faults in the forward/reverse actuation system rather than mechanical transmission failure. Specifically, the forward microswitch or solenoid on the transmission body may fail or lose connection. If the forward solenoid does not energize, the machine will rev but not move forward.
What are the typical undercarriage and tire configurations for this model?
The JCB 406 Farm Master typically runs on 405/70 R18 SPT 9 tires. The machine features a 4x4 axle configuration. Axle options include open differentials for hard ground or limited-slip differentials for soft, muddy terrain. A 100% switchable front axle differential lock is available to provide traction in mud without creating shear forces on hard surfaces.
What electrical or sensor issues are common in the JCB 406 Farm Master?
Electrical issues often center on the forward/reverse direction selection. The shuttle lever operates microswitches that activate hydraulic solenoids on the transmission body. A frequent failure point is the forward microswitch or the associated wiring. Operators should verify voltage at the forward solenoid (approx. 12V) and check for bridged wires or faulty inhibitor switches that prevent starting or direction engagement. The simple analogue in-cab display provides running hours, fuel status, and error alerts, which should be monitored for diagnostic codes.
What are the key weight and capacity specifications for the JCB 406 Farm Master?
The operating weight varies by configuration but is typically around 4,873 kg to 5,020 kg. The standard shovel capacity is 0.8 m³. The full turn tipping load is approximately 3,250 kg to 3,284 kg. The transport length is 4.87 meters, with a transport width of 1.75 meters and a transport height of 2.46 meters. The load-over height is 2,991 mm.
What is the serial number range for the JCB 406 Farm Master parts catalog?
The comprehensive parts catalog for the JCB 406 Farm Master covers machines with serial numbers ranging from OEM part reference to OEM part reference. These machines were manufactured between 1988 and 1994.
What should be checked when buying a used JCB 406 Farm Master?
When inspecting a used JCB 406 Farm Master, verify the forward/reverse electrical actuation by testing the solenoids with a screwdriver blade to check for magnetic attraction. Ensure the inhibitor switch is not bridged or faulty. Check the torque converter filter for metal filings indicating internal wear. Verify the condition of the 405/70 R18 tires and the functionality of the switchable front axle differential lock. Confirm the engine is a JCB Diesel by Kohler KDI 2504 M and check for any error alerts on the analogue display. Have your dealer verify the exact serial number against the OEM part reference range to ensure correct parts availability.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 406 Farm Master. Related factory variants of the same model family:
406 Farm Master
Need a specific 406 Farm Master part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.