JCBjcb indiabackhoe loader 3cx,4cx,214,215,217
Jcb 3DXL(INDIA HOME MARKET )
Maintenance schedule, common problems & OEM parts breakdown
The JCB 3DXL Plus is a backhoe loader designed for the Indian market, featuring a JCB 430 CRDi Stage 5 engine delivering 55 kW (74 hp) at 2200 rpm. The machine has an operating weight of 7620 kg and is available in 2WD and 4WD configurations. It includes a 1.1 cu.m loader bucket and a 0.26 cu.m backhoe bucket. The 3DXL Plus is part of the 3DX family lineage, succeeding earlier 3DX variants with updated emissions compliance and enhanced fuel efficiency.
The 3DXL Plus introduces Stage 5 engine technology, offering 12% better fuel efficiency compared to previous models. The machine features a robust fuel and hydraulic filtration system, extended service intervals, and improved operator comfort with a ROPS/FOPS-rated cabin. Its significance in the used and parts market lies in its reliability, low maintenance requirements, and widespread availability of genuine parts through JCB's extensive dealer network in India.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 3DXL(INDIA HOME MARKET ) specifications
Engine
| Model | JCB 444 CRDI |
| Gross Power | 55 kW (74 hp) @ 2200 rpm |
| Maximum Torque | 400 Nm |
| Emissions Tier | Stage 5 |
Weights
| Operating Weight | 7620 kg |
Dimensions
| Wheelbase | 2170 mm |
| Loader Dump Height | 2740 mm |
| Loader Load Over Height | 3320 mm |
| Loader Max Reach at Full Height | 1150 mm |
| Loader Arm Breakout Force | 5635 kgf |
| Front Tyre Size | 9 x 16 - 16 PR |
| Rear Tyre Size | 16.9 x 28 - 12 PR |
Performance
| Hydraulic Pump Flow | 114 lpm |
| Steering System Pressure | 320 psi (160 bar) |
| Front Axle Oscillation Angle | 16 degrees |
Service capacities (summary)
| Fuel Tank Capacity | 128 L |
| Hydraulic Oil Capacity | 130 L |
| Engine Oil Capacity | 15 L |
| Coolant Capacity | 15 L |
| Transmission Oil Capacity | 16 L |
| Rear Axle Capacity | 23 L |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
3DXL(INDIA HOME MARKET ) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 15 L (3.96 US gal) | JCB Engine Oil Max (meets API CI-4 Plus & JCB Standard 00080) |
| Cooling system | 15 L (3.96 US gal) | JCB Coolant Ready to Use (protection down to -37°C) |
| Fuel tank | 128 L (33.8 US gal) | Diesel fuel |
| Transmission/powertrain compartments | 16 L (4.23 US gal) | JCB Transmission Oil+ |
| Final drives | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system AND tank | 130 L (34.3 US gal) | JCB HVI Hydraulic Oil |
| Axles/differentials | 23 L (6.08 US gal) | JCB Rear Axle Oil |
| Grease (spec only) | N/A | JCB Grease Special or JCB Grease AP 2 |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 3DXL(INDIA HOME MARKET ) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 3DXL(INDIA HOME MARKET ) beyond the schedule
Predictive Maintenance & Fluid Analysis
At 500 hours, take oil samples from the engine, hydraulic system, and axles to establish a baseline. Monitor hydraulic oil condition closely, as the 3DXL Plus uses a 130-liter system. Check the hydraulic return filter for metallic debris. Use JCB-spec long-life coolant and replace it at 1000 hours. Track fuel filter life, extending intervals to 1000 hours if conditions permit. Regular fluid analysis prevents premature component failure and optimizes service intervals.
Corrective & Common Repairs
Address hydraulic hose chafing and cylinder rod scoring during daily checks. Inspect Q-brakes for wear and ensure they remain immersed and protected from dirt. Check the torque converter and transmission oil for contamination. Replace the air filter element if the restriction indicator shows clogging. Verify belt tension on the alternator and fan. Promptly fix fluid leaks to prevent system pressure loss and component damage.
Overhaul & Rebuild Points
At 2000 hours, replace hydraulic oil and clean the tank thoroughly. Inspect the structural frame, loader arm, and backhoe boom for cracks. Check brake disc wear and immersed brake condition. Test injector spray patterns and replace as needed. Inspect the turbocharger shaft play and charge cooler boots. Perform a complete electrical system test. These tasks ensure long-term reliability and prevent major overhauls.
Seasonal & Environment Servicing
In dusty environments, inspect the air filter more frequently and clean the radiator fins. In cold conditions, check coolant concentration and battery electrolyte levels. In hot climates, monitor hydraulic oil temperature and ensure the cooling system is clean. Grease all pivot points regularly to prevent wear from abrasive materials. Store the machine under cover to protect the ROPS/FOPS cabin and electrical components from weather damage.
3DXL(INDIA HOME MARKET ) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 40/302837 | Filter, Element, Fuel | Fuel system service | Check fitment → |
| 32/915801 | Element, Air, Safety | Air intake service | Check fitment → |
| 32/915802 | Element, Air, Main | Air intake service | Check fitment → |
| 550/41639 | Filter, Air | Air intake service | Check fitment → |
| 550/41640 | Filter, Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3DXL(INDIA HOME MARKET ) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Clogged primary fuel filter, failing lift pump, or air leaks on the suction side. | Replace primary fuel filter; verify lift pump primes at key-on; inspect suction-side hoses for air leaks. |
| P0191 | Fuel rail pressure sensor performance | Erratic rail pressure readings due to sensor failure or wiring issues. | Check fuel filter age; test sensor 5V reference and ground; wiggle-test connector for intermittent faults. |
| P2201 | NOx sensor out of range | Faulty NOx sensor or exhaust leaks upstream of the sensor triggering regen loops. | Inspect NOx sensor connector and harness; check for exhaust leaks upstream of the sensor. |
| P20EE | SCR NOx efficiency low | Poor SCR conversion due to DEF injector issues, sensor faults, or contaminated DEF. | Verify DEF quality (32.5% urea); inspect DEF injector for crystals; verify NOx sensor operation. |
| P1C54 | SCR inducement derate | Power reduction triggered by an unresolved emissions/SCR fault. | Fix the root SCR/DEF code first; top off clean DEF; complete parked regen if required. |
| U029D | Lost NOx sensor communication | ECU cannot communicate with NOx sensor A due to electrical faults. | Check battery voltage; inspect NOx connector pins; verify power, ground, and CAN continuity. |
| U0073 | CAN bus off | Module network drop, often caused by low battery voltage or poor grounds. | Load-test battery; clean ground straps; inspect harness at articulation points. |
| E485 | AdBlue / DEF quality | DEF quality out of specification range. | Confirm 32.5% urea concentration; replace contaminated DEF; check quality sensor. |
| T135 | Transmission oil temperature high | Transmission overheating due to low oil level or blocked cooler. | Check oil level; clean cooler fins; allow machine to cool down before continued heavy work. |
| T072 | Output speed sensor no signal | Missing speed signal causing erratic shifting or limp gear. | Inspect speed sensor connector; check wiring integrity at articulation points. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3DXL(INDIA HOME MARKET ) attachments & work tools
Loader Buckets
Standard 1.1 cu.m General Purpose (GP) shovel is supplied with the 3DXL Plus. Optional configurations include a 1.2 cu.m GP shovel and a 6-in-1 multipurpose shovel to enhance versatility for varied loading applications.
Backhoe Buckets
The machine is equipped with a 0.3 cu.m backhoe bucket as standard. JCB offers additional bucket options of 0.12 cu.m and 0.18 cu.m to provide flexibility for different excavation and trenching work applications.
Coupler/Mounting Systems
The 3DXL Plus is designed with fully customizable attachment points to support universal attachability. Specific quick-hitch mechanisms or proprietary coupler types are not detailed in the provided specifications.
Hydraulic Kit/Arrangement
The machine utilizes a robust hydraulic filtration system to increase efficiency. The system supports high hydraulic pump flow of 148 lpm to ensure faster cycle times and improved productivity for attached work tools.
Factory Configurations/Guarding
Standard ROPS & FOPS-rated cabin provides operator safety. The machine features a single-piece composite cab roof that is rustproof and includes molded water channels for durability.
All 3DXL(INDIA HOME MARKET ) assemblies by section
Every catalogued assembly group for the Jcb 3DXL(INDIA HOME MARKET ). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-2-1 Shovel Clam, 6 In 1
| 12***11 | Bush | 2 |
| 12***19 | Bush | 2 |
| 12***23 | Bush | 2 |
A1-4-1 Fork, Kit
| 12***32 | Pin, Pivot | 2 |
| 12***75 | Block, Rubber Pad | 2 |
| 12***27 | Fork | 2 |
A1-5-1 Carriage, Fork Lift
| 13***40 | Forklift, Kit | 1 |
| 13***41 | Arm, Fork | 2 |
| 13***42 | Latch | 2 |
A1-1-2 Shovel, 1.1 Cu.M
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***3Z | Nut | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
A1-3-3 Shovel, With Forks
| 13***1Z | Nut | 0 |
| 40***03 | Tooth, Bucket | 0 |
| 40***63 | Shovel, With Forks Assembly. | 1 |
A1-6-1 Jib, Crane - M/C Mounted
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***3Z | Nut | 4 |
| 40***64 | Jib, Crane | 1 |
A2-1-4 Buckets
| 12***11 | Bucket, 0.24cu.M | 1 |
| 12***12 | Bucket, 0.18cu.M | 1 |
| 12***13 | Bucket, 0.30cu.M | 1 |
A2-6-1 Clam Shell Bucket
| 13***42 | Adapter | 2 |
| 13***43 | Bracket | 2 |
| 13***44 | Clam, Shell Kit | 1 |
A2-5-3 Jaw Bucket, 305 Mm
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
| 12***17 | Bush | 2 |
A2-3-2 Ditch Cleaning, Blade
| 13***12 | Bolt | 3 |
| 13***03 | Nut | 3 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-4-3 Jaw Bucket
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 12***17 | Bush | 2 |
A2-2-3 Backhoe, Attachment
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 12***31 | Bush | 2 |
A3-6-1 Wire, Rope
| 40***83 | Wire, Rope | 1 |
| 40***84 | Grip, Bull Dog | 10 |
A3-2-2 Unloader Valve With, Tyre Inflator
A3-3-3 Breaker Hammermaster, Jcb 360 (Sideplates)
| 13***6Z | Bolt | 4 |
| 13***9Z | Bolt | 8 |
| 14***01 | Nipple, Grease, 90deg. Angle | 4 |
A3-4-1 Breaker Hammermaster, Jcb 360
| 13***14 | Capscrew | 4 |
| 13***16 | Capscrew | 12 |
| 13***19 | Capscrew, M16x90, Grade 12.9 | 12 |
A3-5-1 Swivel Coupling, Hammermaster Jcb 360
| 90***16 | Plug | 2 |
| 98***00 | Coupling, Swivel | 1 |
| 98***01 | Manifold | 1 |
A3-1-1 Cold Start Kit
| 00***57 | Fluid, Capsule Cold Start | 2 |
| 13***54 | Kit, Cold Start | 1 |
| 13***55 | Kit, Cold Start | 1 |
B Bodywork, Cab, Loader End
B1-19-1 Chassis Sideshift, 7'4" Rear Frame
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
B1-5-5 Bonnet
| 12***43 | Buffer | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***8Z | Screw, M8x30 | 2 |
B1-6-4 Grille Front
| 13***9Z | Screw, M10x35mm | 4 |
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
B1-13-2 Valve Mounting, Loader
| 12***46 | Mounting, Rubber | 3 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
B1-3-4 Tank Diesel Fuel
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***00 | Plate, Neck, Diesel Filler | 1 |
| 13***3Z | Screw, M8 X 16 | 6 |
B1-7-1 Step Cab Access
B1-17-3 Stone Guard Hose, Guide Side Shift
| 12***26 | Pin, Hose Retainer | 12 |
| 12***27 | Retainer, Hose; Replaced By 12***27, See San08264 | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
B1-8-2 Fenders Rear
| 13***8Z | Bolt, M10 X 30 | 10 |
| 13***3Z | Nut, Lock, M10 | 10 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 10 |
B1-18-1 Mounting, Side Cover, Engine - Rcp
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B1-11-1 Engine Side Panel
| 13***5Z | Bolt | 4 |
| 14***6Z | Washer, M6 | 4 |
| 14***6Z | Washer, Spring | 4 |
B1-4-2 Stabiliser Sideshift
| 12***12 | Spacer | 4 |
| 12***14 | Pad, Lower Wear, Colour Black | 4 |
| 12***23 | Cap, Sideshift Stabiliser | 2 |
B1-2-3 Tank Hydraulic
| 12***56 | Seal, Cap | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 10 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
B1-1-4 Chassis Sideshift, 7'4" Rear Frame
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 13***0Z | Bolt, M16x100 | 2 |
B2-2-1 Cab Glazing, Clear Glass
| 40***30 | Glass, Windscreen | 0 |
| 40***31 | Glass, Front Quarter, Left Hand | 2 |
| 40***32 | Glass, Front Quarter, Right Hand | 1 |
B2-14-2 Cab Roof
| 13***2Z | Bolt, M8x50 | 4 |
| 14***2Z | Washer | 4 |
| 14***7Z | Washer, Spring | 4 |
B2-8-2 Seat
| 13***8Z | Bolt | 4 |
| 14***6Z | Washer, Spring | 4 |
| 40***60 | Seat, Assembly | 1 |
B2-6-5 Soundproofing Cab, Base
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 14***03 | Screw | 4 |
| 33***77 | Shield, Heat Top | 1 |
B2-1-2 Cab Shell
| 12***82 | Strap | 1 |
| 12***32 | Pin, Hinge | 4 |
| 12***92 | Plate, Door Catch | 2 |
B2-3-3 Door Clear Glass, Direct Glazing
| 12***29 | Grommet | 1 |
| 12***30 | Grommet | 1 |
| 12***50 | Lock, Door, Left Hand | 1 |
B2-15-1 First Aid Box
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 40***03 | Spacer | 2 |
B2-5-2 Window Rear Clear, Glass Direct Glazing
| 12***01 | Stud | 2 |
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 12***02 | Handle, Left Hand | 1 |
B2-9-2 Mirror (External)
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 33***34 | Mirror, Rear View | 1 |
B2-11-3 Cab Rear Valance
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***1Z | Washer | 4 |
| 33***91 | Cover, Valance, Cab Rear | 1 |
B2-10-3 Cab Front Seal
| 12***32 | Seal, Cab Front-Chassis | 1 |
| 12***33 | Strip, Seal Retainer | 1 |
| 12***66 | Plate, Retainer | 2 |
B2-4-2 Window Side Clear, Glass Direct Glazing
| 11***22 | Handle | 1 |
| 12***00 | Frame, Side Window, Left Hand; Replaced By 12***00 + 82***93 Clear Or, 82***09 Tinted | 1 |
| 12***00 | Frame, Side Window, Right Hand; Replaced By 12***00 + 82***94 Clear Or, 82***10 Tinted | 1 |
B2-12-4 Cover Jcb Excavator, Controls
| 13***5Z | Screw, M5 X 20 | 8 |
| 14***03 | Screw | 4 |
| 33***05 | Gaiter, Excavator Lever | 2 |
B2-13-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***10 | Cleaner, Hand, Polyurethane, 454gm/1lb | 0 |
| 64***21 | Adhesive, Jcb Ultrafast 310ml, Unqin | 0 |
B2-7-3 Soundproofing Canopy, Roof
| 13***07 | Bolt, M8 X 25 | 4 |
| 14***02 | Washer | 4 |
| 40***19 | Roof, Lining, Unqin | 1 |
B3-5-3 Arms Loader Shovel, Linkage
| 12***23 | Bush | 6 |
| 12***26 | Plate, Shovel Stop, 12mm | 2 |
| 13***9Z | Screw, M10x35mm | 4 |
B3-3-3 Counter Weight, 3d
| 10***02 | Stopper | 4 |
| 12***28 | Pin, Clampimg | 4 |
| 13***03 | Spacer | 4 |
B3-4-2 Counterweight, Remote Cooling
| 12***79 | Bush, Hinge | 3 |
| 13***03 | Spacer | 4 |
| 13***30 | Hinge, Pin | 3 |
B3-6-3 Safety Strut Loader, Arms
| 12***00 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 33***56 | Foam | 1 |
B3-2-3 Arms Loader, Interlever
| 12***03 | Spacer | 4 |
| 12***23 | Bush | 4 |
| 13***9Z | Bolt, M10x90mm | 6 |
B3-1-4 Arms Loader
| 13***8Z | Bolt, M10x80 | 2 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***0Z | Bolt, M12 X 100mm | 4 |
B4-11-3 Bulkhead, Plate, King Post
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 40***94 | Plate, Bulk Head - Auxiliary, Unqin | 1 |
B4-8-2 Tipping Link
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 40***75 | Link, Tipping Assembly, Unqin | 1 |
| 40***10 | Liner, Bearing, Unqin | 2 |
B4-5-4 Dipper
| 10***01 | Strap | 1 |
| 13***8Z | Bolt, M10x80 | 4 |
| 13***9Z | Bolt, M10x90mm | 3 |
B4-3-4 Kingpost S/S 3d
| 13***0Z | Bolt, M12 X 100mm | 2 |
| 13***4Z | Bolt, M12 X 140 Lg. | 1 |
| 13***2Z | Nut, M12 | 4 |
B4-6-3 Dipper (Stick), Extra-Dig
| 12***01 | Clip | 1 |
| 12***07 | Plate, Spreader; Replaced By 33***94, See San 13691 | 4 |
| 12***89 | Pad, Top Wear | 4 |
B4-10-1 Boom Lock /, Boom Stop
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 13***4Z | Bolt, M20 X 60mm | 1 |
| 13***2Z | Nut, Lock | 1 |
B4-4-4 Boom
| 13***6Z | Bolt, M12 X 70mm | 4 |
| 13***0Z | Bolt, M12 X 100mm | 2 |
| 13***3Z | Nut, M12 | 2 |
B4-1-2 Kingpost Carriage, 3d
B4-2-3 Slew / Swing, Components 3d
| 12***37 | Seal | 2 |
| 12***92 | Tube, Wear, Nylon | 2 |
| 12***40 | Cap, Bolt Cover | 2 |
B5-2-2 Tool Kit, Army - 3dx
| 13***07 | Spanner, 55mm, Single End | 1 |
| 13***11 | Spanner, D.E. | 1 |
| 13***12 | Spanner, D.E | 1 |
B5-1-2 Tool Kit Standard
| 13***11 | Spanner, D.E. | 1 |
| 13***12 | Spanner, D.E | 1 |
| 13***14 | Spanner, D.E. | 1 |
B5-4-2 Decals, - 3dx, 3dxl & Super - 3dx
| 13***13 | Decal, Tyre Pressure | 1 |
| 13***11 | Decal, Pre Cleaner | 1 |
| 33***39 | Decal | 1 |
B5-3-2 Fire Extinguisher
| 13***0Z | Bolt, M8x40 | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
C Electrics-Machine, Cab & Engine
C1-1-14 Harness Machine, Electrics
| 33***65 | Chassis Harness | 1 |
| 33***85 | Panel, Harness | 1 |
| 40***17 | Fuse, Maxi Harness | 1 |
C1-11-1 Mountings & Supports, Harness
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 3 |
| 12***65 | Clip | 2 |
| 12***47 | Clip, Cable | 3 |
C1-4-1 Head Light 12 Volt, Left-Hand Dip -White
| 40***48 | Light, Head Assembly L/H Dip, Unqin | 2 |
| 64***48 | Bulb | 1 |
| 64***34 | Bulb, Side Light, Unqin | 1 |
C1-7-4 Light Working Cab, Rear
| 33***48 | Grommet, Cab Roof | 2 |
| 40***07 | Light, Working | 2 |
| 40***08 | Light, Work Lamp, Adjustable | 2 |
C1-8-1 Light Number Plate
| 40***06 | Light, Number Plate | 2 |
C1-10-1 Horn Installation, Reverse
| 12***31 | Bracket, Rear Horn Mounting, Centremount Biuld | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***1Z | Nut, M8 | 1 |
C1-9-1 Horn Single Tone
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
C1-12-6 Electrics Machine, Switches Gauges
| 10***01 | Gasket | 1 |
| 13***2Z | Nut | 2 |
| 14***11 | Seal, Bonded | 1 |
C1-3-1 Light (Rear)
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
C1-6-2 Light Working Cab, Front
| 40***07 | Light, Working | 2 |
| 40***61 | Nut, Spire | 4 |
| 40***26 | Light, Gasketi Work | 1 |
C1-2-3 Battery 12v Carrier
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
| 12***59 | Clip | 1 |
| 13***1Z | Bolt, M10 X 10 | 1 |
C1-5-3 Mounting Head Light
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 40***99 | Light, Headlamp, Left Hand | 1 |
C3-2-9 Side Console And, Instrumentation
| 13***5Z | Screw, M5 X 20 | 4 |
| 14***03 | Screw | 3 |
| 33***85 | Gaiter, Excavator, 3cx Cab | 1 |
C3-5-2 Switch Column, Shuttle Transmission
| 12***58 | Plate, Retainer | 1 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 14***5Z | Washer, Spring, M5 | 2 |
C3-3-5 Fuses & Relays
| 13***5Z | Bolt | 4 |
| 14***1Z | Washer | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 6 |
C3-8-2 Fan Face Level
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
C3-6-2 Motor Wiper
| 13***1Z | Nut, M8 | 2 |
| 14***1Z | Washer, Lock | 2 |
| 24***05 | O Ring | 2 |
C3-7-2 Light Interior Cab
| 40***57 | Bulb, 12 V - 10 W - Festoon | 1 |
| 40***68 | Light, Interior | 1 |
C3-9-1 Foot Switch Hammer, Attachment
| 12***55 | Spacer | 1 |
| 13***5Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
C3-1-2 Warning Light, Cluster
| 40***85 | Light, Cluster, Warning | 1 |
C3-4-4 Steer Console Front, 2/4wd
| 33***41 | Instrument, Front, Console | 1 |
| 33***55 | Cover, Front Steer Column | 1 |
| 33***56 | Cover, Rear Steer Column | 1 |
D Controls-Machine, Engine & Steering
D1-2-4 Controls Loader, Auxiliary, 3rd Spool Optional
| 03***03 | Pin, Clevis | 3 |
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt, 1/2" X 1" Long | 1 |
D1-8-3 Controls Brake Pedal, Fixed Steering, Column
| 12***01 | Plate, Lock | 1 |
| 12***01 | Pin, Pivot, Brake Pedal | 1 |
| 12***75 | Bracket, Steering Mounting; Replaced By 12***28 | 1 |
D1-25-1 Controls Hyrda Clamp
| 03***03 | Pin, Clevis | 1 |
| 12***79 | Rod, Control | 1 |
| 13***5Z | Bolt | 2 |
D1-7-2 Valve Mounting, Excavator /, Stabiliser
| 13***4Z | Bolt, M10x60 | 3 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***3Z | Washer | 1 |
D1-9-3 Controls Parking, Brake
| 12***73 | Gaiter, Hand Brake | 1 |
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***53 | Lever, Parking Brake, Red Grip | 1 |
D1-3-5 Controls Auxiliary, Valve & Pedal, Linkage
| 03***03 | Pin, Clevis | 8 |
| 13***4Z | Bolt | 4 |
| 13***2Z | Nut | 10 |
D1-4-3 Controls Excavator &, Stabiliser Jcb "X", Diagonal Pattern
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 1 |
| 12***01 | Joint, Ball End, M8 Left Hand Thread | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 2 |
D1-10-2 Control Gear Change
| 11***77 | Plate | 1 |
| 12***96 | Gaiter, Gear Lever | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
D1-6-6 Control Knob, Excavator & Loader, Valve Black Body / Silver Top
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 33***07 | Knob, Top | 2 |
| 33***45 | Knob, With Switch, Gear Lever | 1 |
D1-5-5 Control Knob, Gear Lever
| 24***06 | Grommet, Blind, Noml Dia 20mm | 1 |
| 33***07 | Knob, Top | 1 |
| 33***47 | Knob, Ga Assembly. | 1 |
D1-1-4 Controls Loader, Loader Shift Shovel, Gear Pump Build
| 13***50 | Pin, Clevis | 2 |
| 13***4Z | Bolt | 1 |
| 13***6Z | Bolt, 1/2" X 1" Long | 1 |
D2-1-4 Controls Throttle &, Stop
| 03***55 | Clip, Shut Off Cable Mtg. | 1 |
| 03***63 | Clevis | 1 |
| 12***57 | Gaiter | 1 |
D3-1-3 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***75 | Bracket, Steering Mounting; Replaced By 12***28 | 1 |
| 12***52 | Plate, Retainer | 1 |
E Hydraulics & Air Including, Steering
E1-2-3 Circuit Neutral, Auxiliary 3 Spool
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-5-4 Circuit Loader Arm
| 13***9Z | Setscrew, M8x35 | 4 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt | 2 |
E1-21-3 Circuit Bucket Ram
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***4Z | Nut | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-11-1 Circuit Stabiliser
| 40***08 | Hose, Unqin | 4 |
E1-23-2 Circuit, Jaw Bucket
| 12***36 | Clamp | 1 |
| 12***64 | Pipe, Left Hand Jaw, Mono Dipper | 1 |
| 12***65 | Pipe, Right Hand Jaw, Mono Dipper | 1 |
E1-19-4 Circuit Auxiliary, Extension Ram
| 12***36 | Clamp | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
E1-27-1 Transmission, Oil Cooler Circuit (For Aluminium Oil Cooler)
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 14***14 | Washer, Seal | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 2 |
E1-6-3 Circuit Auxiliary, Loader Arm
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Bolt, M8 X 55 | 2 |
E1-26-1 Hydraulic Oil Cooler, Circuit (For Aluminum Oil Cooler)
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 3 |
| 14***26 | Washer, Seal | 1 |
E1-24-1 Circuit, Loader Lift, Suspension
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Bolt, M10x90mm | 3 |
E1-12-1 Circuit Boom Ram
| 13***4Z | Nut | 1 |
| 13***5Z | Nut | 1 |
| 40***04 | Hose, High Pressure | 1 |
E1-20-5 Circuit Bucket, Ram Extradig
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
| 12***36 | Clamp | 1 |
E1-7-5 Circuit Transmission, 2ws & Aws
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 14***14 | Washer, Seal | 1 |
| 40***71 | Cooler, Transmission Oil | 1 |
E1-15-2 Circuit Auxiliary, Breaker 360, Return
| 12***58 | Pipe, Boom Return | 1 |
| 13***0Z | Bolt, M10 X 40 | 6 |
| 14***26 | Washer, Seal | 1 |
E1-22-3 Circuit Hydra Clamp
| 16***02 | Adapter | 2 |
| 24***05 | O Ring | 6 |
| 33***33 | Hose | 1 |
E1-16-2 Circuit Auxiliary, Breaker 360, Feed
| 12***67 | Pipe, Manifold | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***4Z | Nut, Back | 4 |
E1-17-2 Circuit Breaker, 360, Feed
| 13***2Z | Bolt, 3/8"Unf X 3" | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut | 2 |
E1-8-2 Circuit, Hydraulic - Rcp
| 16***06 | Adapter, 3/4" Bsp M/M | 1 |
| 32***00 | Strainer | 1 |
| 33***82 | Pipe L.H. | 1 |
E1-1-5 Circuit Neutral, 2 Spool
| 13***8Z | Bolt, M10 X 30 | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
| 33***25 | Hose, High Pressure | 1 |
E1-18-2 Circuit Auxiliary, Valve Block
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-14-2 Circuit Aux Breaker,, Return To Tank Side-, Shift, Gear Pump
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***1Z | Bolt, M12x110 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E1-10-3 Circuit Slew Ram
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 2 |
| 33***65 | Hose, 3/8bsp 1740mm | 1 |
| 33***66 | Hose, 3/8bsp 1410mm | 1 |
E1-13-1 Circuit Dipper Ram
| 12***36 | Clamp | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***4Z | Nut | 1 |
E1-3-4 Circuit, Neutral 2 Spool - Loader
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-9-2 Circuit Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***04 | Adapter, Male/Male | 2 |
| 16***07 | Adapter | 1 |
E1-4-3 Circuit, Neutral Auxiliary 3 Spool - Loader
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***11 | Seal, Bonded | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
E1-25-1 Circuit, Hydraulic Tool
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E2-2-2 Pump Transmission &, Ss700 Syncro Shuttle, Pump & Main Hyd Pump Drive
| 13***3Z | Bolt, M8 X 55 | 4 |
| 20***52 | Pump, Assembly, Transmission | 1 |
| 22***68 | Circlip, Internal | 1 |
E2-4-1 Motor, Hydraulic, Remote
| 40***99 | Motor, Ga | 1 |
| 55***35 | Seal, Shaft | 1 |
| 55***36 | Kit, Seal | 1 |
E2-5-1 Fan, Moulding Remote Cooling
| 13***5Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***6Z | Washer, M6 | 1 |
E2-3-1 Pump, Mounting, Rcp
| 13***8Z | Bolt | 4 |
| 13***3Z | Bolt, M10 X 130 | 2 |
| 13***2Z | Bolt, M16 X 120 | 1 |
E2-6-1 Control, Flow Control, Valve Rcp
| 13***6Z | Bolt | 2 |
| 13***1Z | Nut, M8 | 2 |
| 14***17 | Seal | 3 |
E2-1-4 Pump Main Hydraulic, 23/23ccr
| 13***0Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***11 | Seal, Bonded | 1 |
E2-7-1 Motor, Mounting, Rcp
| 13***8Z | Bolt, M10 X 30 | 6 |
| 13***3Z | Nut, Lock, M10 | 6 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E3-4-1 Valve Main Relief, Loader Valve
| 25***01 | Valve, Relief | 1 |
| 25***02 | Valve, Relief Mrv, 3300psi | 1 |
| 25***32 | Kit-Repair | 1 |
E3-14-2 Lubricants & Filters
| 13***05 | Diesel | 0 |
| 22***33 | Fluid Anti-Freeze, 1 | 0 |
| 33***80 | Mosil, 3866 | 0 |
E3-3-1 Valve Spool Standard
| 25***02 | Retainer, Wiper | 1 |
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***37 | Kit-Seal, Valve Spool | 1 |
E3-2-4 Valve, Loader, New Block - 2 Spool (Ports Re-Oriented)
| 16***55 | Adaptor, 39.5mm Long. M/M 1/2" X 7/8" | 4 |
| 24***06 | O Ring | 6 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-5-1 Valve Unloader, Loader Valve
| 25***16 | O Ring | 1 |
| 25***17 | Spring | 1 |
| 25***28 | Coil, Soleniod Assembly | 1 |
E3-6-1 Valve Relief, Auxiliary & Load, Hold Deck
| 25***11 | Cap | 3 |
| 25***12 | O Ring | 3 |
| 25***13 | Spring | 1 |
E3-13-1 Filter Hydraulic
| 13***8Z | Screw, M8x30 | 4 |
| 13***1Z | Nut | 4 |
| 14***26 | Washer, Seal | 1 |
E3-8-3 Adaptors & Mounting, Excavator Valve
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***10 | Adapter, Includes 'O'Ring | 1 |
| 16***11 | Adapter | 1 |
E3-16-1 Valve, Auxiliary, Backhoe
| 13***2Z | Bolt | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E3-17-1 Valve Components, Auxiliary, Excavator & Roadbreaker
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 2 |
| 25***05 | Washer | 6 |
| 25***06 | Nut | 6 |
E3-19-1 Valve, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***02 | Adapter, 1/4" Bsp M/M | 1 |
E3-7-2 Valve Auxiliary &, Extradig Dipper, Breaker
| 16***06 | Adapter, 39.5mm Lg. M/M | 2 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 3 |
| 24***07 | O Ring | 5 |
E3-9-2 Valve Auxiliary, Backhoe
| 13***2Z | Bolt | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E3-12-1 Valve Rotary Clamp, Excavator Valve,, Sideshift
| 25***01 | Screw | 1 |
| 25***10 | Screw, Cap | 1 |
| 25***35 | O Ring | 1 |
E3-10-3 Valve Relief Dipper, Boom, Bucket & Slew
| 25***58 | Valve, Relief, 4500psi | 1 |
| 25***60 | Valve, Relief, 3800psi | 2 |
| 25***05 | Seal, Arv Service Kit | 1 |
E3-2-1 Valve Loader 2 Spool, With Float
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 4 |
| 16***10 | Adapter, Includes 'O'Ring | 1 |
| 24***06 | O Ring | 3 |
E3-11-2 Valve Components, Excavator
| 25***19 | Valve, Excavator, Centermount | 1 |
| 25***01 | Screw | 12 |
| 25***02 | Retainer, Wiper | 12 |
E3-9-4 Valve Section, Excavator Auxiliary
| 25***30 | Seat, Spring | 2 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***28 | Seal, Wiper | 2 |
E3-1-3 Valve Loader 3 Spool, With Float
| 14***11 | Seal, Bonded | 1 |
| 16***02 | Adapter | 1 |
| 16***06 | Adapter, 39.5mm Lg. M/M | 4 |
E3-9-3 Valve Components,, Auxiliary Excavator, & Road-Breaker
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 2 |
| 25***05 | Washer | 6 |
| 25***06 | Nut | 6 |
E3-18-1 Valve, Section, Excavator Auxiliary
| 25***30 | Seat, Spring | 2 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***28 | Seal, Wiper | 2 |
E3-15-3 Valve Priority
| 14***11 | Seal, Bonded | 2 |
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E3-20-1 Valve Flow Regulator, Hammer Circuit
| 13***8Z | Bolt, M8x80mm Long | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 14***7Z | Washer, Spring | 3 |
E4-5-8 Bucket, Cyl. B/H
| 40***76 | Ram, -As Suppli, Crowd | 1 |
| 55***95 | Grease, Nipple, Unqin | 1 |
| 55***14 | Bush, Unqin | 1 |
E4-15-1 Ram, Extension
| 40***88 | Dipper, Ram, Extension | 1 |
| 55***21 | Piston Rod, S/A | 1 |
| 55***22 | Tube, S/A | 1 |
E4-3-9 Boom Ram
| 40***74 | Ram, Boom, Cylinder | 1 |
| 55***95 | Grease, Nipple, Unqin | 1 |
| 55***96 | Screw, Set, Unqin | 1 |
E4-7-1 Ram Shovel
| 40***66 | Ram, Shovel | 1 |
| 55***75 | Piston, Rod Nut, Unqin | 1 |
| 55***76 | Retainer, Unqin | 1 |
E4-9-2 Ram Steering, 4wd
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***1Z | Bolt, Hex. Hd, M20x110 | 2 |
| 14***2Z | Washer, M20 | 2 |
E4-6-1 6 In 1 Ram
E4-8-1 Steering Ram, 2 Wd
| 40***50 | Ram, Steer 2wd | 1 |
| 55***91 | Seal, Dust, Unqin | 1 |
| 55***45 | O Ring, Std, Unqin | 1 |
E4-12-1 Bucket, Ram, (Dongyang)
| 33***91 | Tube, Ass'Y. | 1 |
| 33***95 | Seal, Kit (Dong-Bucket) | 0 |
| 33***97 | Rod, Ass'Y | 1 |
E4-14-1 Boom, Ram, (Dongyang)
| 33***89 | Tube, Ass'Y | 1 |
| 33***93 | Rod, Ass'Y | 1 |
| 33***94 | Seal, Kit (Dong-Boom) | 0 |
E4-1-2 Ram Lift Standard
| 40***44 | Ram, Lift | 1 |
| 55***95 | Grease, Nipple, Unqin | 1 |
| 55***75 | Piston, Unqin | 1 |
E4-10-3 Stabiliser Ram
| 40***77 | Ram, Stabiliser L/H | 1 |
| 40***78 | Ram, Stabiliser R/H | 1 |
| 55***13 | Tube, Sub Assembly Rhs, Unqin | 1 |
E4-2-2 Bucket, Lift Cyl. - Ldr
| 40***43 | Ram, Shovel | 1 |
| 55***75 | Piston, Rod Nut, Unqin | 1 |
| 55***95 | Grease, Nipple, Unqin | 1 |
E4-4-9 Dipper Ram
| 13***33 | Spring | 1 |
| 40***75 | Dipper Ram -As Suppl | 1 |
| 55***89 | Piston, Rod S/A, Unqin | 1 |
E4-1-8 Crowd Ram
| 40***68 | Ram, Crowd, Unqin | 1 |
| 55***95 | Grease, Nipple, Unqin | 1 |
| 55***02 | Ring, Back-Up, Unqin | 1 |
E4-11-4 Slew Ram
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 22***17 | Clip, Worm Drive | 1 |
| 33***99 | Cylinder, Slew | 2 |
E4-13-1 Dipper, Ram (Dongyang)
| 33***88 | Rod, Cover | 1 |
| 33***90 | Tube, Assembly. | 1 |
| 33***92 | Seal, Kit (Dong-Dipper) | 0 |
F Axles, Wheels & Transmission
F1-6-2 Axle Assembly, 2wd Steering
| 10***01 | Nut | 12 |
| 12***01 | Pin, King | 2 |
| 12***02 | Pin, Cotter | 2 |
F1-4-4 Hub & Components, 4wd Steering, 30kph & 35 Kph
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 33***60 | Plug Filler | 2 |
F1-5-3 4wd Steering Axle, 30kph & 35kph
| 21***16 | Pin, Tension | 1 |
| 40***32 | Shim, Kit | 0 |
| 40***14 | Drivehead, 2.923 | 1 |
F1-7-1 Power Track Rod 4wd
| 12***89 | Gaiter | 2 |
| 12***55 | Gaiter | 2 |
| 12***53 | Link, Trackrod, M24/M22 | 2 |
F1-1-1 Axle Pivot Pin &, Grease
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***3Z | Nut, M12 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
F1-3-3 Axle Assembly, Steering, 30kph & 35kph
| 13***9Z | Bolt | 16 |
| 44***02 | Joint, Knuckle Swivel | 1 |
| 44***03 | Joint, Knuckle Swivel | 1 |
F1-2-4 Axle Assembly, Steering, 30kph & 35kph
| 12***38 | Stop, Lock, 35mm Long | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***82 | Circlip | 2 |
F2-2-6 Differential, Assembly & 35kph
| 13***7Z | Cab, Screw M10 X 25, G12.9 Micro-Encaps | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 33***53 | Nut, M30 X2, Static | 1 |
F2-3-6 Crown Wheel & Pinion, 35kph & 30kph
| 13***8Z | Bolt | 8 |
| 33***54 | Verbus Ripp M12 X 30l | 12 |
| 40***32 | Shim, Kit | 1 |
F2-1-7 Axle Assembly, Rear Drive 36 Kph & 40 Kph
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 28 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
F2-4-5 Brakes Axle
| 22***71 | Circlip, External | 4 |
| 40***26 | Pin, Reaction | 6 |
| 40***13 | Brake, Piston | 2 |
F3-3-4 Wheels & Tyres
| 13***53 | Adapter, Air Filling | 2 |
| 33***47 | Wheel Rim | 2 |
| 40***24 | Tyre, Unqin | 2 |
F3-2-3 Propshaft, Transmission Rear, Drive Axle Manual Sideshift
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***4Z | Nut | 4 |
| 33***15 | Strap, Bearing | 2 |
F3-1-3 Propshaft, Transmission Front, Drive Axle Manual
| 33***15 | Strap, Bearing | 4 |
| 55***94 | Kit, Spider, Unqin | 2 |
| 55***95 | Flange, Yoke, Unqin | 1 |
F3-4-3 Wheel & Tyre, Assembly, Front, 36kph 12.5x18
| 33***21 | Wheel, Front Assembly | 2 |
| 40***10 | Wheel, & Tyre 4wd, Unqin | 2 |
| 40***15 | Tyre | 1 |
F5-7-3 Transmission 4wd, Internal Components
| 33***56 | Nut Stake M30 X 2 | 1 |
| 33***57 | Screw, Flanged M10x1.5x35 | 4 |
| 33***52 | Cover Machining -Lay | 1 |
F5-9-3 Torque Converter, W300 3.01, Ratio Drive Plate
| 04***02 | Bolt, M8 X 20 | 6 |
| 04***36 | Kit-Drive Plate, Torque Converter, See Ti 2/479; Ss By 04/60***64 | 1 |
| 04***37 | Drive Plate, Part Of Kit 04***13 | 1 |
F5-5-5 Transmission Assy, Syncro Shuttle, 4wd 5kph
| 33***58 | Set Screw M10x1.5x30 | 10 |
| 40***75 | Case, Front, Machined | 1 |
| 41***00 | Sealant | 0 |
F5-11-1 Dipstick & Filler, Manual Transmission
| 00***74 | Clamp, U | 1 |
| 13***2Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
F5-6-2 Transmission 4wd, Clutch Unit Drop Box
| 22***15 | Circlip | 1 |
| 33***60 | Plate, Pressure, 4mm | 1 |
| 33***16 | Clutch, Assembly - 4wd | 1 |
F5-3-2 Transmission 2wd, Reverser Unit
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 2 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-10-3 Transmission, Mounting
| 11***09 | Washer | 2 |
| 13***8Z | Bolt, M12 X 80mm | 2 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
F5-8-6 Transmission 4wd, Ss700 Syncro Shuttle, External Components
| 13***8Z | Bolt, M10 X 30 | 12 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
F5-1-8 Transmission Assy, Ss700 Syncro Shuttle, & Extl Compt 2wd
| 13***8Z | Bolt, M10 X 30 | 12 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
F5-2-4 Transmission 2wd, Internal Components
| 33***56 | Nut Stake M30 X 2 | 1 |
| 33***57 | Screw, Flanged M10x1.5x35 | 4 |
| 33***52 | Cover Machining -Lay | 1 |
F5-4-5 Transmission 2wd, Gear Change
| 22***80 | Circlip | 1 |
| 33***60 | Gaiter, Gear Lever | 1 |
| 33***61 | Gear, Lever Turret | 1 |
G Brakes
G1-1-6 Brake System
| 12***40 | Reservoir | 1 |
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***16 | Pipe, Servo Link | 1 |
G1-3-2 Brake Parking
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
| 13***4Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 4 |
N Engine
N1-1-4 Engine Complete
| 30***02 | Fan, 4dx | 1 |
| 33***23 | Engine, Turbo 96 Hp Bs-Ii | 1 |
| 33***67 | Engine 76 Hp Na | 1 |
N1-2-2 Engine Mountings
| 11***09 | Washer | 2 |
| 13***9Z | Bolt, M12x90mm | 2 |
| 13***3Z | Nut, M12 | 2 |
N6-2-2 Fuel System, 3dx
| 00***14 | Filter, Mud Assembly | 1 |
| 03***65 | Plug | 1 |
| 03***76 | Bolt | 4 |
N6-3-1 Sedimentor &, Related Parts
| 03***76 | Bolt | 2 |
| 03***77 | Washer | 4 |
| 40***54 | Filter, Sediment, Unqin | 1 |
N6-4-1 Mud Filter &, Related Parts
| 00***14 | Filter, Mud Assembly | 1 |
| 00***15 | Filter, Element | 1 |
| 03***65 | Plug | 1 |
N6-1-1 Fuel System
| 00***14 | Filter, Mud Assembly | 1 |
| 03***65 | Plug | 1 |
| 03***76 | Bolt | 4 |
P Engine
P3-4-2 Filter Pre-Cleaner
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
P3-3-1 Filter Air, Turbocharged
| 32***01 | Element, Air, Safety | 1 |
| 32***02 | Element, Air, Main | 1 |
| 32***00 | Bracket, Air Filter Mounting | 1 |
P3-5-3 Silencer & Extension
| 13***7Z | Bolt, M10x25 | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
P4-3-3 Radiator Fittings &, Mountings
| 13***3Z | Screw, M6x16 | 3 |
| 13***5Z | Bolt | 4 |
| 13***3Z | Bolt, M10 X 16 | 8 |
P4-4-5 Radiator & Hose
| 22***02 | Clip, Jubilee; Superseded By 22***03 By Jcb Standards On P, I S61/0006 (17/10/00) See San 14225 | 4 |
| 22***12 | Clip, Jubilee | 2 |
| 33***84 | Hose, Bottom Radiator | 1 |
P4-7-1 Mountings, Fittings & (For Aluminium Oil Cooler)
| 13***3Z | Bolt, M10 X 16 | 8 |
| 13***3Z | Bolt, M6 X 16, Flange Reduced Hex | 11 |
| 13***3Z | Bolt, M8 X 16, Flange Reduced Hex | 4 |
P4-6-1 Radiattor, Mountings - Rcp
| 13***5Z | Bolt | 4 |
| 13***3Z | Bolt, M10 X 16 | 8 |
| 13***7Z | Bolt, M10x25 | 8 |
P4-8-1 Radiator & Hoses, (For Aluminium Oil Cooler)
| 22***02 | Clip, Jubilee; Superseded By 22***03 By Jcb Standards On P, I S61/0006 (17/10/00) See San 14225 | 1 |
| 22***12 | Clip, Jubilee | 4 |
| 33***06 | Radiator Water Hose | 1 |
P4-5-2 Radiator, Cooling, Circuit - Rcp
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Bolt, M10 X 30 | 10 |
| 13***1Z | Nut | 4 |
P4-9-1 Air Filter, Assembly, Nsap
| 55***39 | Filter, Air | 1 |
| 55***40 | Filter, Air | 1 |
| 55***70 | Assembly, Air Filter, Nsap | 1 |
Frequently asked questions
What engine does the JCB 3DXL Plus use?
The JCB 3DXL Plus uses a JCB 430 CRDi Stage 5 engine, delivering 55 kW (74 hp) at 2200 rpm and 400 Nm of torque.
What is the operating weight of the JCB 3DXL Plus?
The operating weight of the JCB 3DXL Plus is 7620 kg.
What replaced the JCB 3DXL Plus?
The JCB 3DXL Plus is part of the ongoing 3DX family lineage, with the 3DX Plus and 3DX Super variants offering updated features and compliance. Specific successor models depend on regional market updates and emission standards.
What 3DXL(INDIA HOME MARKET ) owners discuss
What engine powers the JCB 3DXL PLUS in the India home market, and what are its key performance specifications?
The JCB 3DXL PLUS is powered by the JCB 444 CRDI engine. It delivers a gross power of 55 kW (74 hp) at 2200 rpm and a maximum torque of 400 Nm. The engine utilizes CRDI and Turbo technology for fuel efficiency and high torque output.
What are the typical hydraulic and undercarriage characteristics reported for this machine type?
The machine features a 130-liter hydraulic oil capacity. The loader bucket capacity is 1.1 cubic meters, and the backhoe bucket capacity is 0.26 cubic meters. The operating weight is 7620 kg, which provides stability on worksites. The machine uses a Synchroshuttle transmission and power track steering.
Are there known electrical or sensor issues associated with JCB backhoe loaders that owners should monitor?
Owners of similar JCB models report that forward/reverse movement issues often stem from electrical faults rather than hydraulic ones. Specifically, the forward/reverse lever operates microswitches that activate hydraulic solenoids on the transmission body. A common failure point is the inhibitor switch or the forward microswitch, which can cause the machine to rev but not move forward. Verification of solenoid energization with a screwdriver blade is a standard diagnostic step.
What wear patterns or maintenance intervals are typical for the 3DXL PLUS series?
The 3DXL PLUS has a 4,000-hour hydraulic oil change interval to reduce maintenance frequency. The machine includes Auto Idle and Auto Stop features to reduce fuel consumption when not in active use. Cabin noise is reduced by 7% compared to previous iterations.
What specific component should be checked when buying a used 3DXL PLUS to ensure proper shuttle operation?
Check the forward/reverse microswitches and the inhibitor switch located on the transmission body under the cab. These components control the hydraulic solenoids for direction selection. A failed forward microswitch or a bridged inhibitor switch can result in the machine having power in reverse but failing to engage forward motion.
How does the JCB 3DXL PLUS compare to the standard JCB 3DX in terms of engine power?
The JCB 3DXL PLUS uses the JCB 444 CRDI engine producing 55 kW (74 hp). In contrast, the standard JCB 3DX uses a DieselMax engine producing 37 kW (49 hp). The 3DXL PLUS offers higher torque (400 Nm) and greater loader bucket capacity (1.1 cu.m vs 1.0 cu.m).
What safety features are standard on the JCB 3DXL PLUS cabin?
The machine includes ROPS (Roll-Over Protective Structure) and FOPS (Falling Object Protective Structure) cabin protection. It also features a fully enclosed cabin with reduced noise levels and smooth hand and foot throttle controls.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 3DXL(INDIA HOME MARKET ) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.