JCBagriculturalbackhoe loader 3cx,4cx,214,215,217
Jcb 3D-MK3
Maintenance schedule, common problems & OEM parts breakdown
The JCB 3D-MK3 is a backhoe loader produced during the Mk3 generation, succeeding the 3D-MK2 and preceding the 3DX series. It features a 57 kW diesel engine and has a shipping weight of 7060 kg with 2WD and standard buckets. The machine offers configurations including 2WD and 4WD variants, with overall length of 6.11 m and maximum dig depth of 4.77 m.
The 3D-MK3 represents a specific era of JCB backhoe engineering with distinct powertrain and hydraulic specifications compared to later Mk3 variants like the 3C-MK3. Its continued presence in the used market is driven by its robust 57 kW engine and durable chassis design, which remain relevant for contractors seeking reliable, high-capacity earthmoving equipment with proven serviceability.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 3D-MK3 specifications
Engine
| Model | JCB 444 |
| Gross Power | 74 HP (55 kW) |
| Peak Torque | 400 Nm |
| Displacement | 4.4 L |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | Not documented for this exact serial range — verify with your dealer |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | Not documented for this exact serial range — verify with your dealer |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase | 2240 mm (88.2 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel Speed | Not documented for this exact serial range — verify with your dealer |
| Dig Depth | Not documented for this exact serial range — verify with your dealer |
| Lift Capacity | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 128 L (33.8 gal) |
| Hydraulic System | 92 L (24.3 gal) |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | 20.5 L (5.4 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 3D-MK3 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 3D-MK3 beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid analysis at the 500-hour interval is critical for the 3D-MK3. Sample engine oil, hydraulic fluid, axle oil, and final drive oil to establish wear patterns. The 57 kW engine relies on JCB Engine Oil Special or equivalent 15W-40; monitor for contamination. Hydraulic system pressure of 3300 psi requires strict filter maintenance. The hydraulic return filter magnet must be inspected for metallic debris at every 500-hour service to detect early pump or cylinder wear.
Corrective & Common Repairs
Common repairs on the 3D-MK3 involve the torque converter and transmission system. At 1000 hours, inspect the torque converter bolts and transmission oil filter. The 12V electrical system requires regular alternator and starter load testing to prevent failure. Check the e-Waste Gate Turbocharger for shaft play and boot integrity. Inspect the Q-brakes for wear and ensure hydraulic actuation is functioning correctly to maintain safe stopping power on the 7060 kg machine.
Overhaul & Rebuild Points
The 2000-hour deep service dictates the next phase of the 3D-MK3's life. Drain and clean the hydraulic tank thoroughly before refilling with JCB-spec oil. Inspect the boom, arm, and chassis structure for unauthorized welding or cracking. Measure swing ring play if equipped with excavator attachments. Check injector spray patterns and replace as required. Structural integrity of the 6.11 m length frame is vital for safe operation at maximum dig depth.
Seasonal & Environment Servicing
In cold climates, use JCB 15W/40 Multigrade oil rated for -10°C to 50°C. In agricultural settings, verify compatibility with JCB Super Universal Agricultural fluids if specified. The 128 L fuel tank requires regular water separator drainage. Inspect the cab HVAC system for evaporator condition and cabin filter cleanliness. Ensure the 12V electrical system is protected from moisture ingress, particularly around the engine bay and undercarriage components during wet seasons.
3D-MK3 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 988/00038 | Element, Oil Filter | Lubrication service | Check fitment → |
| 32/300900 | Filter | Scheduled service item | Check fitment → |
| 200/44601 | Head, Sediment Filter | Scheduled service item | Check fitment → |
| 106/99600 | Adapter, Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3D-MK3 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Clogged fuel filters or failing lift pump | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring short | Inspect sensor connector for corrosion and test sensor resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Verify oil level and inspect sensor wiring harness |
| P2047 | DEF/AdBlue injector circuit open | SCR system fault or injector wiring issue | Check injector connector and wiring for damage |
| U0100 | Lost communication with Engine Control Module | CAN bus communication failure or poor ground connection | Check battery voltage, ground straps, and CAN bus connectors |
| 101 | Low transmission clutch pressure detected | Transmission hydraulic pressure fault | Check transmission fluid level and pressure sensor |
| P0325 | Accelerometer fault (signal/noise ratio too low in idle) | Knock sensor or accelerometer circuit issue | Inspect sensor wiring and connector integrity |
| P0335 | Crankshaft Position Sensor 'A' Circuit fault | Faulty crank sensor or wiring open/short | Check sensor gap and wiring continuity |
| P0101 | MAF Sensor Fault | Mass Air Flow sensor malfunction | Inspect MAF sensor and intake air path |
| P0102 | MAF Low Voltage Fault | MAF sensor low voltage signal or ground fault | Check MAF sensor power and ground circuits |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3D-MK3 attachments & work tools
Backhoe Buckets
Standard backhoe bucket capacity ranges from 0.24 to 1.3 cubic meters (0.31 to 1.7 cubic yards). The machine achieves a maximum digging depth of 4.77 meters. Bucket selection varies by configuration and series.
Loader Buckets
Standard loader bucket capacity is 1.0 cubic meter (1.3 cubic yards). Options include Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading buckets. The 3D variant features a larger front shovel as standard compared to the 3C.
Specialty Attachments
A 4-in-1 bucket option is available for the 3D model. JCB offers an OEM hydraulic breaker range designed for excavator and backhoe carrier compatibility. Additional attachments include tilt rotators and grapples for material handling.
Coupler/Mounting Systems
Work tools attach to the base machine using a coupler or quick coupler system. The specific coupler type is determined by the attachment manufacturer and machine configuration.
Hydraulic Kit Requirements
The machine operates on a 3300 psi hydraulic system. Hydraulic breakers and other specialized attachments require appropriate hydraulic kit arrangements to interface with the carrier's hydraulic circuit.
Factory Configurations & Guarding
The 3D model includes a ROPS cabin as part of the basic model configuration. The machine is equipped with outrigger stabilizers as special equipment to ensure stability during operation. The 3D has a larger standard front shovel than the 3C.
All 3D-MK3 assemblies by section
Every catalogued assembly group for the Jcb 3D-MK3. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-4-1 Blade, Dozer
| 13***24 | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 52***00 | Blade | 1 |
A1-5-1 Fork Lift, Frame Mounted., Jib Crane, Direct Mounted
| 10***52 | Pin, Pivot | 4 |
| 10***31 | Pin, Pivot | 4 |
| 13***22 | Bolt | 8 |
A1-6-1 Pole Planter, Single
| 10***52 | Pin, Pivot | 2 |
| 10***66 | Pin, Pivot | 2 |
| 10***31 | Pin, Pivot | 2 |
A1-1-1 Shovel
| 10***52 | Pin, Pivot | 2 |
| 10***31 | Pin, Pivot | 2 |
| 10***06 | Plate, Toe | 1 |
A1-1-2 Shovel
| 10***52 | Pin, Pivot | 2 |
| 10***31 | Pin, Pivot | 2 |
| 10***01 | Bracket, Anchor, Welded | 1 |
A1-2-1 Shovel, 6 In 1 Clam
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***52 | Pin, Pivot | 2 |
A1-6-2 Pole Planter, Single
| 10***52 | Pin, Pivot | 2 |
| 10***66 | Pin, Pivot | 2 |
| 10***31 | Pin, Pivot | 2 |
A1-3-1 Fork Lift
| 13***24 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 52***00 | Arm, Fork | 1 |
A2-5-1 Bucket, Jaw
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
| 12***17 | Bush | 1 |
A2-4-1 Bucket, Tapered Ejector
| 10***79 | Pin, Pivot | 1 |
| 13***22 | Bolt | 1 |
| 13***03 | Nut | 1 |
A2-1-1 Bucket
| 10***04 | Boss, Pivot | 1 |
| 13***11 | Bolt | 0 |
| 13***14 | Bolt | 6 |
A2-2-1 Attachments, Backhoe, Ripper Tooth,B.Blade, Bucket,Clay,Square Hole,T.Ditching
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-3-1 Blade, Ditch Cleaning
| 13***12 | Bolt | 3 |
| 13***2Z | Bolt | 3 |
| 13***1Z | Nut | 0 |
A2-6-1 Attachments, Jaw Bucket
| 10***48 | Pin, Pivot | 1 |
| 13***4Z | Bolt | 6 |
| 13***14 | Bolt | 6 |
A3-4-1 Grab Extension
| 13***04 | Bolt | 4 |
| 13***12 | Bolt | 16 |
| 13***12 | Bolt | 3 |
A3-2-1 Grab
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
| 10***70 | Pin | 2 |
| 12***29 | Bush | 1 |
A3-1-1 Grab Mounting
| 10***01 | Pin, Pivot | 2 |
| 13***24 | Bolt | 2 |
| 13***03 | Nut | 2 |
A3-3-1 Grab Actuator
| 13***06 | Bolt | 5 |
| 13***14 | Bolt | 2 |
| 13***34 | Bolt | 2 |
A4-1-2 Roadbreaker, Installation
| 10***06 | Lock; Supply 12***71 | 2 |
| 13***10 | Bolt | 8 |
| 13***22 | Bolt, Long | 3 |
A4-5-1 Powerbreaker Steels, Krupp
| 99***06 | Shaft | 1 |
| 99***07 | Pad, Pile Driving | 1 |
| 99***08 | Sleeve, Pile Driving | 1 |
A4-3-1 Roadbreaker, Steels
| 99***02 | Tool, Chisel, 1.1/4in | 1 |
| 99***03 | Tool, Digger Steel, 3" | 1 |
| 99***04 | Tool, Digger Steel, 5" | 1 |
A4-7-1 Circuit, Road Breaker
| 13***03 | Nut | 1 |
| 13***08 | Screw, Cap | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
A4-1-1 Roadbreaker, Installation
| 10***06 | Lock; Supply 12***71 | 2 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 8 |
| 13***22 | Bolt, Long | 3 |
A4-2-1 Roadbreaker
| 13***08 | Screw, Cap | 1 |
| 52***00 | Tool, Hammer | 2 |
| 99***00 | Handle | 1 |
A4-4-1 Powerbreaker
| 11***09 | Washer | 4 |
| 13***10 | Bolt | 4 |
| 13***52 | Bolt, Centre | 5 |
A4-6-1 Roadbreaker, Hose Reel
| 13***04 | Bolt | 4 |
| 13***8Z | Bolt, M10x80 | 1 |
| 13***3Z | Nut | 10 |
A5-1-1 Travelling Postion
| 10***00 | Bracket | 1 |
| 10***00 | Clamp | 2 |
| 10***00 | Bracket | 3 |
B Bodywork, Cab, Loader End
B1-4-2 Floor Plate, & Fittings, Build 3 Transmission
| 10***02 | Plate, Foot | 1 |
| 10***06 | Cover, Valve | 1 |
| 10***01 | Cowling | 1 |
B1-1-1 Mainframe, Sideshift
| 10***06 | Clip, Bonnet; Replaced By 26***00 | 2 |
| 10***07 | Spacer | 6 |
| 10***01 | Hinge, Bonnet | 1 |
B1-1-2 Mainframe, Sideshift
| 10***06 | Clip, Bonnet; Replaced By 26***00 | 2 |
| 10***07 | Spacer | 6 |
| 10***01 | Hinge, Bonnet | 1 |
B1-4-4 Floor Plate, & Fittings, Build 5 Transmission
| 10***06 | Cover, Valve | 1 |
| 10***04 | Cover | 1 |
| 10***00 | Guard | 1 |
B1-4-1 Floor Plate, & Fittings, Manual Transmission
| 10***02 | Plate, Foot | 1 |
| 10***06 | Cover, Valve | 1 |
| 10***01 | Cowling | 1 |
B1-3-1 Stabiliser, Sideshift
| 10***38 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 2 |
| 10***02 | Foot; Replaced By 12***66, See San04389 | 2 |
B1-2-1 Hydra-Chassis, Components
| 10***01 | Strainer | 1 |
| 10***02 | Retainer | 1 |
| 10***04 | Clamp | 1 |
B1-4-3 Floor Plate, & Fittings, Build 3 Transmission C/W Wheel Brakes
| 10***02 | Plate, Foot | 1 |
| 10***06 | Cover, Valve | 1 |
| 10***01 | Cowling | 1 |
B2-1-1 Cab Shell, Unglazed, Standard
| 10***02 | Catch | 1 |
| 10***03 | Key | 2 |
| 10***00 | Handle, External | 1 |
B2-5-3 Seat, German
| 10***00 | Seat, Passenger | 1 |
| 10***01 | Bracket | 2 |
| 11***00 | Housing | 1 |
B2-5-1 Seat, Standard
| 10***00 | Seat, Passenger | 1 |
| 10***01 | Bracket | 1 |
| 10***03 | Plunger | 1 |
B2-6-1 Soundproofing, Cab Base, Manual Transmission
| 10***01 | Panel | 1 |
| 10***02 | Panel | 1 |
| 10***03 | Panel, Diesel Tank | 1 |
B2-5-2 Seat, Optional
| 10***00 | Slide | 1 |
| 10***01 | Mounting | 2 |
| 10***00 | Mounting | 1 |
B2-3-1 Cab Glazing
| 10***01 | Holder, Licence | 1 |
| 10***00 | Mirror | 1 |
| 10***00 | Arm, Mounting | 1 |
B2-4-2 Wash/Wipe, Windscreen, Electric
| 12***00 | Pump, And Reservoir | 1 |
| 14***01 | Screw, No.6x3/8" Posiflange, Self Tapping | 2 |
| 25***00 | Pump, And Reservoir | 1 |
B2-2-1 Cab Shell, Unglazed, Safety
| 10***02 | Catch | 1 |
| 10***03 | Key | 2 |
| 10***02 | Lining | 1 |
B2-7-2 Soundproofing, Engine, Build 5
| 13***06 | Bolt | 8 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 13 |
| 13***07 | Bolt | 2 |
B2-6-2 Soundproofing, Cab Base, Build 3 Build 5 Transmission
| 10***22 | Panel, Hose Shroud | 1 |
| 10***01 | Panel | 1 |
| 10***02 | Panel | 1 |
B2-4-1 Wash/Wipe, Windscreen, Manual
| 12***01 | Jet | 1 |
| 14***01 | Screw, No.6x3/8" Posiflange, Self Tapping | 2 |
| 24***07 | Grommet | 1 |
B2-7-1 Soundproofing, Engine, Build 3
| 10***03 | Baffle, Top | 1 |
| 10***00 | Baffle, Rh | 1 |
| 10***00 | Baffle, Rh | 1 |
B2-2-2 Sun Canopy
| 11***09 | Washer | 4 |
| 13***06 | Bolt | 4 |
| 13***10 | Bolt | 4 |
B3-1-1 Arms, Loader
| 10***32 | Pin, Pivot | 4 |
| 10***52 | Pin, Pivot | 4 |
| 10***00 | Arm, Shovel | 1 |
B4-6-2 Dipper (Stick), Extradig
| 10***25 | Pin, Pivot | 2 |
| 10***56 | Pin, Pivot | 1 |
| 10***73 | Pin, Pivot | 1 |
B4-3-1 Kingpost 3c
| 10***25 | Pin, Pivot | 1 |
| 10***01 | Washer, Spacer | 1 |
| 10***01 | Plate, Keep | 1 |
B4-2-1 Slewing Actuator
| 10***02 | Plate, Cover | 1 |
| 10***05 | Pad, Thrust | 1 |
| 10***07 | Gear, Slew | 1 |
B4-1-1 Kingpost Carriage
| 10***02 | Block, Slide | 4 |
| 10***00 | Bonnet | 2 |
| 10***01 | Buffer | 2 |
B4-6-1 Dipper (Stick), Extradig
| 10***25 | Pin, Pivot | 2 |
| 10***56 | Pin, Pivot | 1 |
| 10***73 | Pin, Pivot | 2 |
B4-5-1 Dipper (Stick), Mono
| 10***56 | Pin, Pivot | 1 |
| 10***79 | Pin, Pivot | 1 |
| 10***91 | Pin, Pivot | 1 |
B4-4-1 Boom, Sideshift
| 10***79 | Pin, Pivot | 1 |
| 10***10 | Pin, Pivot | 1 |
| 10***01 | Spacer | 1 |
B4-4-2 Boom, Sideshift
| 10***43 | Pin, Pivot | 1 |
| 10***69 | Pin, Pivot | 1 |
| 10***01 | Spacer | 1 |
B4-5-2 Dipper (Stick), Mono
| 10***56 | Pin, Pivot | 1 |
| 10***84 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot | 2 |
B4-3-2 Kingpost 3d
| 10***19 | Pin, Pivot | 1 |
| 10***00 | Kingpost, Standard Build | 1 |
| 10***00 | Shaft, Pivot | 1 |
B5-2-2 Tool Kit, Standard
| 27***00 | Bag, Tool | 1 |
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
B5-1-1 Paint And Transfers
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 1 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 1 |
| 42***05 | Paint, Gloss Yellow, 2.5 Lts | 1 |
B5-2-1 Tool Kit, Standard
| 82***08 | Screwdriver | 1 |
| 82***21 | Spanner, Adjustable, 10in. | 1 |
| 82***01 | Wheelbrace; Replaced By 82***28, See San 14523 | 1 |
B5-3-1 Tool Kit, Supplementary
| 27***00 | Bag, Tool | 1 |
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
C Electrics-Machine, Cab & Engine
C1-2-1 Side & Rear Lights
| 10***01 | Bracket | 1 |
| 13***04 | Bolt | 2 |
| 13***3Z | Nut | 2 |
C1-3-1 Light, Side, Shovel Mounted, German, Austrian & Swiss
| 10***00 | Bracket | 1 |
| 13***01 | Nut | 3 |
| 13***8Z | Bolt | 3 |
C1-5-1 Light, Head, 12.Volt, Right Hand Dip, White With Side Repeat
| 10***01 | Bracket | 2 |
| 13***05 | Bolt | 4 |
| 14***03 | Screw, Self Tapping | 8 |
C1-1-1 Electrical Equipment, Cab
| 14***07 | Washer | 1 |
| 52***02 | Cover, Wiper Motor | 2 |
| 70***00 | Light, Number Plate | 1 |
C1-2-2 Side & Rear Lights
| 10***01 | Bracket | 1 |
| 10***01 | Bracket, Standard | 1 |
| 10***01 | Bracket | 1 |
C1-4-1 Light, Head, Working
| 10***00 | Guard | 4 |
| 10***00 | Guard | 4 |
| 13***10 | Bolt | 6 |
C2-3-1 Alternator, Ac Delco Dn460
| 13***4Z | Bolt | 2 |
| 13***34 | Bolt, Pivot | 1 |
| 13***1Z | Nut | 1 |
C2-2-3 Heater, Installation, Manual Build, T/C Build /3
| 10***03 | Clip | 4 |
| 10***01 | Fan | 1 |
| 10***00 | Box | 1 |
C2-2-2 Heater, Installation, Manual Build, T/C Build /3
| 10***03 | Clip | 6 |
| 10***01 | Plate | 1 |
| 10***00 | Cover | 1 |
C2-3-5 Alternator, 18acr 43amp 12.Volt, T/C Trans Build /5
| 54***22 | Bolt, Fixing | 3 |
| 54***43 | Bracket, De | 1 |
| 54***51 | Stator | 1 |
C2-3-4 Alternator Mountings, 4.98nt Engine T/C Build /5
| 2K***73 | Spacer | 1 |
| 53***20 | Bolt | 1 |
| 86***67 | Bracket, Support | 1 |
C2-5-1 Warning System, Power Breaker
| 13***03 | Nut | 1 |
| 14***19 | Seal, Dowty | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
C2-3-2 Alternator Mountings, + Installation, Optional Sealed Alternator
| 13***02 | Bolt | 4 |
| 13***04 | Bolt | 1 |
| 13***06 | Bolt | 1 |
C2-1-2 Electrics, Engine, T/C Build /5
| 04***76 | Switch, Isolating | 1 |
| 10***01 | Gasket | 1 |
| 10***00 | Clamp | 1 |
C2-2-1 Heater, Installation, Manual Build, T/C Build /3
| 10***01 | Heater | 1 |
| 10***03 | Clip | 4 |
| 10***01 | Motor; Replaced By 10***05 + 10***06 | 1 |
C2-3-3 Alternator, Sealed, 35amp 12.Volt
| 71***00 | Alternator | 1 |
| 71***01 | Holder, & Brushes Assembly | 1 |
| 71***02 | Regulator | 1 |
C2-1-1 Electrics, Engine, Manual Build, T/C Build /3
| 10***01 | Gasket | 1 |
| 10***00 | Cable, Tractometer Drive | 1 |
| 10***06 | Washer, Leather | 1 |
C2-4-1 Motor, Starter
| 70***01 | Bracket, Commutator End | 1 |
| 70***03 | Coil, Field, Assembly | 1 |
| 70***05 | Kit-Bush | 1 |
C2-2-4 Heater, Installation, T/C Build /5
| 10***03 | Clip | 4 |
| 11***02 | Tap | 2 |
| 11***03 | Tap | 2 |
C3-4-2 Instrument Panel, Canopy, Cabless
| 10***01 | Gaiter | 1 |
| 10***02 | Gaiter | 1 |
| 10***03 | Gaiter | 1 |
C3-3-2 Instrument Panel, Transmission Build/5
| 11***01 | Panel, Standard | 1 |
| 11***02 | Panel, Standard | 1 |
| 11***03 | Ring, Backing | 1 |
C3-5-1 Hazard Warning, Uk
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 2 |
| 70***00 | Light, Warning | 1 |
| 70***00 | Switch, Hazard Warning | 1 |
C3-1-1 Instrument Cluster
| 02***79 | O Ring | 1 |
| 02***97 | Stabiliser | 1 |
| 02***99 | Panel, Instrument | 1 |
C3-3-1 Instrument Panel, Transmission Build/3
| 10***04 | Plate | 1 |
| 10***05 | Panel | 1 |
| 10***00 | Pipe | 1 |
C3-2-2 Instrument Panel, Transmission Manual
| 10***02 | Panel | 1 |
| 10***03 | Panel | 1 |
| 10***03 | Bracket | 2 |
C3-6-1 Instrument Panel, German
| 10***01 | Panel, Switch | 1 |
| 10***01 | Panel | 1 |
| 10***02 | Panel | 1 |
C3-2-1 Instrument Panel, Transmission Manual
| 10***00 | Panel, Assembly | 1 |
| 10***02 | Panel | 1 |
| 10***03 | Panel | 1 |
C3-4-1 Instrument Panel, Canopy, Cabless
| 10***00 | Panel, Manual Trans | 1 |
| 10***00 | Panel, T/C Trans Build/3 | 1 |
| 10***01 | Plate | 1 |
C3-7-1 Cover, Vandal Proof, Instrument Panel Manual & T/C Build/3
| 10***06 | Lock; Supply 12***71 | 1 |
| 13***3Z | Nut | 4 |
| 52***05 | Cover | 1 |
C3-7-2 Cover, Vandal Proof, Instrument Panel, T/C Build/5
| 10***06 | Lock; Supply 12***71 | 2 |
| 52***00 | Cover | 1 |
| 52***00 | Cover | 1 |
D Controls-Machine
D1-7-1 Lever Lock, Installation, Shovel Valve
| 10***01 | Plate | 2 |
| 10***02 | Bracket | 1 |
| 10***00 | Plate | 1 |
D1-2-1 Lever Control, Three, Shovel Valve
| 10***01 | Pin, Pivot | 1 |
| 10***02 | Link | 6 |
| 10***00 | Plate | 1 |
D1-5-2 Lever Control, Excavator Valve, Optional Single Operation
| 13***08 | Bolt | 2 |
| 13***2Z | Nut | 8 |
| 13***3Z | Nut | 4 |
D1-1-1 Lever Control, Single, Shovel Valve
| 13***04 | Bolt | 2 |
| 92***57 | Washer | 2 |
| 92***48 | Washer, Lock | 1 |
D1-8-1 Cover, Excavator Valve
| 10***00 | Cover | 1 |
| 10***01 | Cover | 1 |
| 13***08 | Bolt | 2 |
D1-5-1 Lever Control, Excavator Valve, Optional Plus, Diagonal.
| 10***01 | Plate | 2 |
| 10***02 | Lever | 2 |
| 10***03 | Bracket | 1 |
D1-6-1 Foot Control Linkage
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***08 | Bolt | 3 |
| 13***30 | Bolt | 3 |
D1-4-1 Lever Control, Excavator Valve, Optional
| 10***01 | Knob, Large Dia. | 2 |
| 10***01 | Lever | 2 |
| 10***02 | Lever | 2 |
D1-3-1 Lever Control, Excavator Valve
| 13***04 | Bolt | 6 |
| 92***51 | Nut | 4 |
| 92***57 | Washer | 10 |
D2-2-2 Brake Pedal, Manual Transission, 272b
| 02***03 | Bush | 4 |
| 02***47 | Key | 1 |
| 10***03 | Plate, Support | 1 |
D2-4-1 Control, Handbrake, Standard, Manual & T/C Transmission Build/3
| 02***93 | Brake, Hand | 1 |
| 02***04 | Button | 1 |
| 02***06 | Pawl | 1 |
D2-3-3 Brake Pedal, T/C Transission, Build/5
| 11***00 | Cowling | 1 |
| 11***01 | Pin, Pivot | 1 |
| 11***03 | Cover | 1 |
D2-2-1 Brake Pedal, Manual Transission, 384b
| 02***03 | Bush | 4 |
| 02***70 | Pin, Clevis | 2 |
| 02***47 | Key | 1 |
D2-3-1 Brake Pedal, T/C Transission, Build/3
| 02***03 | Bush | 2 |
| 02***70 | Pin, Clevis | 2 |
| 02***47 | Key | 1 |
D2-8-1 Linkage, Handbrake, With Wheel Brakes, Manual & T/C Transmission Build/3
| 10***03 | Lever | 2 |
| 10***01 | Shaft | 1 |
| 10***00 | Adjuster | 1 |
D2-4-2 Control, Handbrake, Standard, T/C Transmission Build/5
| 11***00 | Brake, Hand | 1 |
| 12***05 | Bracket | 1 |
| 12***00 | Brake, Hand | 1 |
D2-5-1 Control, Handbrake, Heavy Duty, Manual & T/C Transmission Build/3
| 10***00 | Lever, Hand Brake | 1 |
| 10***01 | Link | 2 |
| 10***02 | Spacer | 3 |
D2-6-1 Control, Handbrake, With Wheel Brakes, Manual & T/C Transmission Build/3
| 10***00 | Lever, Assembly | 1 |
| 10***01 | Ratchet | 1 |
| 10***03 | Pawl | 1 |
D2-7-1 Brake Linkage, With Wheel Brakes, Manual & T/C Transmission Build/3
| 02***70 | Pin, Clevis | 8 |
| 10***01 | Lever | 1 |
| 10***04 | Pin, Pivot | 1 |
D2-1-1 Clutch Pedal, Manual Transmission
| 02***57 | Lever | 1 |
| 02***02 | Bush | 1 |
| 02***70 | Pin, Clevis | 2 |
D2-3-2 Brake Pedal, T/C Transission, Build/3
| 02***03 | Bush | 1 |
| 02***47 | Key | 1 |
| 10***03 | Plate, Support | 1 |
D3-2-3 Throttle Control, T/C Transmission, Build/5
| 02***82 | Spring | 1 |
| 07***99 | Spring, Return | 1 |
| 10***00 | Bracket | 1 |
D3-3-1 Controls, Transmission Dump, Build/5
| 11***01 | Bolt | 1 |
| 11***02 | Gaiter | 1 |
| 11***03 | Rod | 1 |
D3-2-2 Throttle Control, Manual Transmission, T/C Transmission Build/3
| 07***99 | Spring, Return | 1 |
| 10***01 | Pedal | 1 |
| 10***00 | Bracket | 1 |
D3-1-3 Control Linkage, Forward & Reverse, T/C Build/5
| 10***01 | Knob, Large Dia. | 1 |
| 11***00 | Boss | 1 |
| 11***02 | Handle | 1 |
D3-1-2 Control Linkage, Forward & Reverse, T/C Build/3 German
| 10***00 | Clevis, With Pin | 3 |
| 13***08 | Bolt | 1 |
| 13***02 | Nut | 3 |
D3-4-1 Control, Remote Gear Lever, T/C Transmission Build/5
| 11***01 | Bracket | 1 |
| 11***02 | Pin, Pivot | 2 |
| 11***03 | Knob | 1 |
D3-1-1 Control Linkage, Forward & Reverse, T/C Build/3
| 10***00 | Clevis, With Pin | 3 |
| 13***08 | Bolt | 1 |
| 13***02 | Nut | 4 |
D3-2-1 Throttle Control, Manual Transmission, T/C Transmission Build/3
| 02***82 | Spring | 1 |
| 07***99 | Spring, Return | 1 |
| 10***21 | Bracket | 1 |
E Hydraulics
E1-6-1 Circuit, Auxiliary, Loader Arm, Three Lever Valve
| 10***01 | Clip | 2 |
| 13***12 | Bolt | 1 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 2 |
E1-5-1 Circuit, Loader Arm, Single Lever Valve
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
E1-4-1 Circuit, Roadbreaker
| 13***10 | Bolt | 4 |
| 13***10 | Bolt | 8 |
| 13***10 | Bolt | 1 |
E1-8-2 Circuit, Backhoe, Standard Dipper, Sideshift
| 10***00 | Junction, Pipe | 1 |
| 10***00 | Junction, Pipe | 1 |
| 10***00 | Pipe | 1 |
E1-12-1 Circuit, Hydraclamp, Sideshift
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
| 10***01 | Housing | 4 |
E1-7-1 Circuit, Auxiliary, Loader Arm, Grab Attachment
| 13***3Z | Nut | 4 |
| 14***06 | Washer | 2 |
| 14***11 | Seal, Bonded | 4 |
E1-11-1 Circuit, Excavator, Auxiliary Attachment, Grab
| 10***01 | Pin, Pivot | 2 |
| 13***06 | Bolt | 8 |
| 13***24 | Bolt | 2 |
E1-10-1 Circuit, Excavator, Auxiliary Attachment
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 2 |
| 13***3Z | Nut | 6 |
E1-8-1 Circuit, Backhoe, Standard Dipper, Sideshift
| 10***00 | Junction, Pipe | 1 |
| 10***00 | Pipe | 1 |
| 13***3Z | Nut | 2 |
E1-1-1 Circuit, Neutral, Single Pump, Single Lever Valve
| 10***04 | Clamp | 2 |
| 10***05 | Plate, Clamp | 2 |
| 10***00 | Pipe | 1 |
E1-11-2 Circuit, Excavator, Auxiliary Attachment, Grab
| 10***01 | Pin, Pivot | 2 |
| 13***24 | Bolt | 2 |
| 13***3Z | Nut | 12 |
E1-9-1 Circuit, Backhoe, Extradig Dipper, Sideshift
| 13***08 | Bolt | 1 |
| 13***01 | Plug, Drain | 1 |
| 13***8Z | Bolt | 2 |
E1-5-2 Circuit, Loader Arm, Three Lever Valve
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
E1-13-1 Circuit, Breaker Kit, Brh125 Breaker
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***06 | Adapter, 3/4" Bsp M/M | 2 |
| 16***18 | Adapter | 1 |
E1-1-2 Circuit, Neutral, Single Pump, Three Lever Valve
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
| 10***04 | Clamp | 2 |
E1-3-1 Circuit, Roadbreaker, Powerbreaker
| 13***3Z | Nut | 1 |
| 14***06 | Washer | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 7 |
E1-12-2 Circuit, Hydraclamp, Sideshift
| 10***00 | Pipe | 1 |
| 10***01 | Housing | 4 |
| 10***03 | Bolt | 4 |
E1-2-1 Circuit, Neutral, Twin Pump, Auxiliary
| 13***10 | Bolt | 4 |
| 13***10 | Bolt | 8 |
| 13***10 | Bolt | 4 |
E2-2-3 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 91***00 | Pump; Replaced By 91***00, See San05519 | 1 |
| 91***00 | Pump, American; Replaced By 91***00, See San05519 | 1 |
| 92***59 | Key | 1 |
E2-4-1 Motor, Grab
| 91***00 | Motor | 1 |
| 92***43 | Housing | 1 |
| 92***44 | Cover, Front | 1 |
E2-1-1 Pump, Main Hydraulic, Single, Standard
| 13***14 | Bolt | 2 |
| 13***10 | Bolt | 4 |
| 13***10 | Bolt | 4 |
E2-3-2 Shaft, Pump Drive, T/C Build/5
| 11***02 | Adapter, Drive | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***04 | Screw, Grub | 1 |
E2-3-1 Shaft, Pump Drive, Manual Build, T/C Build/3
| 10***05 | Adapter | 1 |
| 13***06 | Bolt | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
E2-2-2 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***14 | Bolt | 2 |
| 13***32 | Bolt | 4 |
| 13***3Z | Nut | 2 |
E2-2-1 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***10 | Bolt | 2 |
| 14***08 | Washer, Spring | 2 |
| 20***09 | Plug | 1 |
E3-11-1 Valve, Inline Relief
| 13***30 | Bolt | 2 |
| 14***16 | Seal, Bonded | 1 |
| 14***05 | Washer; Replaces 82***03 | 2 |
E3-7-1 Valve, Assembly, Excavator, Sideshift
| 10***02 | Spacer | 2 |
| 10***00 | Restrictor, Flow | 2 |
| 10***00 | Restrictor, Slew | 2 |
E3-13-1 Valve, Relief, Roadbreaker
| 52***00 | Valve, Relief | 1 |
| 99***00 | Valve, Relief Kit | 1 |
E3-10-1 Valve, Grab
| 13***26 | Bolt, L=1.3/4" | 2 |
| 21***11 | Pin, Split | 3 |
| 91***00 | Valve, Changeover | 1 |
E3-1-1 Valve, Loader, Single Lever
| 13***6Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 14***26 | Washer, Seal | 3 |
E3-9-1 Valve, Auxiliary, Foot Control
| 13***2Z | Nut | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***04 | Adapter, Male/Male | 1 |
E3-2-1 Valve, Loader, Components, Single Lever
| 13***06 | Bolt | 4 |
| 24***05 | O Ring | 1 |
| 24***08 | O Ring | 2 |
E3-6-1 Valve, Loader, Auxiliary Components, Three Lever
| 25***03 | Valve, Section, Assembly | 1 |
| 25***10 | Cover, Rubber; Nla | 1 |
| 25***11 | Retainer | 1 |
E3-4-1 Valve, Loader, Loader Components, Three Lever
| 25***01 | Valve, Section, Assembly | 1 |
| 25***10 | Cover, Rubber; Nla | 1 |
| 25***11 | Retainer | 1 |
E3-12-1 Filter, Hydraulic
| 10***09 | Plug, Filler | 1 |
| 13***18 | Bolt | 2 |
| 13***3Z | Nut | 2 |
E3-12-2 Filter, Hydraulic, Powerbreaker
| 13***7Z | Bolt | 3 |
| 13***20 | Bolt | 1 |
| 13***3Z | Nut | 2 |
E3-5-1 Valve, Loader, Bucket Components, Three Lever
| 24***05 | O Ring | 2 |
| 25***02 | Valve, Section, Assembly | 1 |
| 25***08 | O Ring | 1 |
E3-8-1 Valve, Components, Excavator
| 13***06 | Bolt | 12 |
| 24***14 | O Ring | 1 |
| 24***04 | O Ring | 1 |
E3-3-1 Valve, Loader, Three Lever
| 16***07 | Adapter | 2 |
| 24***08 | O Ring | 3 |
| 24***08 | O Ring | 6 |
E3-14-1 Hydraulic Fluid
| 40***23 | Fluid, Hydraulic, 25 Litre | 0 |
| 40***24 | Fluid, Hydraulic, 200 Litres | 0 |
E3-7-2 Valve, Assembly, Excavator, Sideshift
| 10***02 | Spacer | 2 |
| 10***00 | Restrictor, Slew | 2 |
| 10***01 | Adapter | 1 |
E4-2-1 Rams, Backhoe, 3c
| 12***15 | Bush | 1 |
| 12***22 | Bush | 1 |
| 12***23 | Bush | 1 |
E4-6-1 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 24***06 | O Ring | 1 |
| 24***13 | O Ring | 2 |
E4-4-1 Ram, Attachment
| 12***11 | Bush | 1 |
| 12***25 | Bush | 1 |
| 12***26 | Bush | 1 |
E4-1-2 Ram, Loader Lift., Ram, Shovel Arm, 3d (Optional 3c With 6 In 1 Shovel)
| 12***15 | Bush | 1 |
| 12***22 | Bush | 1 |
| 14***01 | Washer, Aluminium | 2 |
E4-5-1 Ram Seal Kits, Backhoe Rams, Loader Rams
| 21***13 | Pin, Cotter, Split | 1 |
| 21***16 | Pin, Split, 6 X 71 | 1 |
| 21***16 | Pin, Split | 1 |
E4-3-1 Ram, Boom 5.000"
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 13***22 | Bolt | 1 |
E4-1-1 Ram, Loader Lift., Ram, Shovel Arm
| 12***15 | Bush | 1 |
| 12***22 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-2 Ram, Boom 5.000"
| 12***17 | Bush | 1 |
| 12***23 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-2-2 Rams, Backhoe, 3d
| 12***15 | Bush | 1 |
| 12***22 | Bush | 1 |
| 12***23 | Bush | 1 |
F Transmission & Rear Axle
F1-3-1 Cover, Clutch
| 02***76 | Screw | 4 |
| 02***33 | Strip | 1 |
| 13***10 | Bolt | 6 |
F1-2-1 Flywheel & Housing
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
| 02***56 | Plate | 1 |
F1-11-1 Layshaft, 272b (3x3 Trans)
| 02***42 | Bearing | 1 |
| 02***53 | Bearing | 2 |
| 02***69 | Gear | 1 |
F1-7-1 Primary Shaft, 384b (5x2 Trans)
| 02***01 | Seal | 2 |
| 02***24 | Circlip | 2 |
| 02***55 | O Ring | 1 |
F1-10-1 Gearbox Casing, 272b (3x3 Trans)
| 03***01 | Cover | 1 |
| 10***05 | Plate, 4 Cylinder | 1 |
| 13***08 | Bolt | 6 |
F1-9-1 Layshaft, 384b (5x2 Trans)
| 02***88 | Circlip | 2 |
| 02***14 | Circlip | 1 |
| 02***62 | Bearing | 2 |
F1-4-1 Clutch Plate
| 02***58 | Strut | 4 |
| 02***14 | Hose, Greasing | 1 |
| 02***81 | Retainer | 4 |
F1-5-1 Gearbox Casing, 384b (5x2 Trans)
| 10***05 | Plate, 4 Cylinder | 1 |
| 13***8Z | Bolt | 6 |
| 13***10 | Bolt | 12 |
F1-12-1 Primary Shaft, 272b (3x3 Trans)
| 02***01 | Seal | 2 |
| 02***62 | Gear, Reverse | 1 |
| 02***68 | Shaft | 2 |
F1-14-1 Gearbox Cover, 272b (3x3 Trans)
| 02***13 | Arm, First/Reverse | 1 |
| 02***23 | Pin | 9 |
| 02***31 | Gasket | 1 |
F1-1-1 Mainframe, Engine, 384b (5x5 Trans), 272b (3x3 Trans)
| 02***00 | Bush | 3 |
| 10***17 | Washer | 6 |
| 10***29 | Guard, Sump | 1 |
F1-6-1 Gearbox Cover, 384b (5x5 Trans)
| 02***32 | Bolt | 1 |
| 02***05 | Dipstick | 1 |
| 02***23 | Pin | 7 |
F1-13-1 Crown Wheel & Pinion, 272b (3x3 Trans)
| 02***18 | Carrier | 1 |
| 02***19 | Sleeve | 1 |
| 02***20 | Coupling, Hub | 2 |
F1-8-1 Crown Wheel & Pinion, 384b (5x2 Trans)
| 02***28 | Nut | 2 |
| 22***59 | Circlip, External | 1 |
| 82***33 | Nut, Locking | 1 |
F2-2-1 Gearbox Casing, Trans Build/3
| 10***05 | Plate, 4 Cylinder | 1 |
| 13***10 | Bolt | 12 |
| 13***20 | Bolt | 3 |
F2-5-1 Layshaft, Trans Build/3
| 02***14 | Circlip | 1 |
| 22***63 | Circlip; Replaces 370a0100z | 2 |
| 83***23 | Circlip | 1 |
F2-3-1 Gearbox Cover, Trans Build/3
| 02***32 | Bolt | 1 |
| 02***05 | Dipstick | 1 |
| 02***23 | Pin | 5 |
F2-1-1 Flywheel & Housing, Trans Build/3
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
| 10***01 | Plate | 1 |
F2-4-1 Crown Wheel & Pinion, Trans Build/3
| 02***28 | Nut | 2 |
| 02***46 | Bearing | 1 |
| 22***59 | Circlip, External | 1 |
F3-6-1 Reaction Plate, Trans Build/3
| 13***08 | Bolt | 8 |
| 13***10 | Bolt | 11 |
| 13***10 | Bolt | 2 |
F3-3-1 Impeller Assembly, Trans Build/3
| 13***06 | Bolt | 20 |
| 13***12 | Bolt | 8 |
| 14***12 | Washer, Shakeproof | 8 |
F3-1-1 Transmission, Assembly Build/3
| 44***00 | Transmission, Torque Converter | 1 |
F3-9-1 Valve, Modulating, Trans Build/3
| 24***06 | O Ring | 2 |
| 44***22 | Plug, Pressure, Taper | 2 |
| 44***02 | Spring | 1 |
F3-8-1 Valve, Directional, Trans Build/3
| 13***02 | Bolt | 2 |
| 13***11 | Bolt | 2 |
| 13***30 | Bolt | 3 |
F3-11-2 Mainframe, Dipstick & Filler, Trans Build/3
| 10***00 | Dipstick | 1 |
| 10***01 | Dipstick | 1 |
| 10***00 | Tube, Dipstick | 1 |
F3-10-1 Circuit, Trans Build/3
| 10***00 | Pipe | 1 |
| 10***00 | Bracket | 1 |
| 10***00 | Pipe | 1 |
F3-7-1 Filter, Transmission, Build/3
| 13***20 | Stud | 2 |
| 13***12 | Screw, Cap | 2 |
| 14***13 | Washer | 2 |
F3-10-2 Circuit, Trans Build/3
| 10***00 | Pipe | 1 |
| 10***00 | Cooler, Oil | 1 |
| 10***00 | Bracket | 1 |
F3-5-1 Clutch, Trans Build/3
| 13***05 | Screw | 8 |
| 44***05 | Ring, Piston | 2 |
| 44***13 | Dowel | 2 |
F3-11-1 Mainframe, Dipstick & Filler, Trans Build/3
| 10***00 | Frame | 1 |
| 10***00 | Frame | 1 |
| 10***00 | Dipstick | 1 |
F3-4-1 Layshaft, Trans Build/3
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 1 |
| 44***08 | Bearing, Roller | 1 |
| 44***14 | Shaft, Lay | 1 |
F3-2-1 Maincase, Trans Build/3
| 13***04 | Bolt | 6 |
| 13***02 | Bolt | 1 |
| 13***04 | Bolt | 3 |
F4-3-1 Wheel & Tyre, Assembly
| 10***01 | Nut, Wheel | 12 |
| 10***01 | Nut | 16 |
| 25***01 | O Ring | 2 |
F4-2-2 Half Shaft & Housing, 384b Trans Build, 272b Trans Build With Wheel Brakes.
| 02***25 | Stud, Wheel | 16 |
| 02***19 | Shaft, Half | 2 |
| 02***06 | Dowel | 4 |
F4-1-1 Differential, Trans Build/3, Manual Trans.
| 02***12 | Housing, Bearing | 2 |
| 02***34 | Shim | 0 |
| 02***35 | Shim | 0 |
F4-2-1 Half Shaft & Housing, 384b Trans Build, 272b Trans Build
| 02***66 | Gear, Pinion 12 Tooth | 2 |
| 02***67 | Gear, 45 Tooth | 2 |
| 02***18 | Shaft, Half | 2 |
F5-4-1 Mountings, 498 Engine, Transmission Build/5
| 11***00 | Mounting | 1 |
| 11***07 | Plate, Support | 4 |
| 11***08 | Mounting, Rubber | 4 |
F5-2-1 Gear Change, Trans Build/5
| 05***16 | Rod | 1 |
| 05***17 | Spring | 1 |
| 05***18 | Ball | 2 |
F5-3-1 Gearbox Components, Trans Build/5
| 05***06 | Seal, Oil | 1 |
| 05***08 | Seal, Oil | 2 |
| 05***24 | Gear | 1 |
F5-1-1 Gearbox Housing, Trans Build/5
| 05***00 | Gearbox, Assembly | 1 |
| 05***01 | Gasket | 1 |
| 05***02 | Cover; N.L.A. Recommend Customer Go'S To Used Parts, Dealer. B Borsley'S Requested This. | 1 |
F5-2-2 Gear Change, Trans Build/5
| 05***16 | Rod | 1 |
| 05***17 | Spring | 1 |
| 05***18 | Ball | 2 |
F6-6-1 Circuit, Oil Cooler, Torque Converter, Trans Build/5
| 11***00 | Cooler, Oil | 1 |
| 11***00 | Base | 1 |
| 13***10 | Bolt | 2 |
F6-3-1 Gearbox Components, Trans Build/5
| 04***01 | Seal | 2 |
| 04***02 | Bearing | 1 |
| 04***03 | Carrier, Assembly | 1 |
F6-7-1 Propshaft, Transmission Drive
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 8 |
| 13***3Z | Nut | 8 |
| 14***03 | Nipple, Grease | 1 |
F6-1-1 Transmission, Shuttle Reverser, Trans Build/5
| 04***47 | Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve., Lowing Parts 81***78 + 04/50***01 Ti Gen046. W When Fitting New Housing Please Order The Fol, Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve. | 1 |
| 04***48 | Sleeve | 1 |
| 04***49 | Ring, Spacer | 1 |
F6-8-1 Filter, Transmission, Build/5
| 02***09 | Seal | 1 |
| 32***00 | Filter | 1 |
| 98***38 | Element, Oil Filter | 1 |
F6-6-2 Circuit, Oil Cooler, Torque Converter, Trans Build/5
| 04***90 | Pipe; Use 04/50***04. | 1 |
| 04***91 | Elbow | 1 |
| 04***92 | Pipe | 1 |
F6-2-1 Forward Clutch, Trans Build/5
| 04***01 | Seal | 1 |
| 04***20 | Gear, Drive | 1 |
| 04***21 | Gear, Hub | 1 |
F6-4-1 Valve, Shuttle, Trans Build/5
| 04***57 | Lever | 1 |
| 04***58 | Spring | 1 |
| 04***59 | Valve, Assembly, Forward/Reverse | 1 |
F6-5-1 Flywheel & Housing, 498 Engine, Trans Build/5
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
F7-3-1 Crown Wheel & Pinion, Trans Build/5
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
| 45***04 | Housing; Replaced By 99***00 + 90***00 X2. 990/662, 01 X2 Dry Brakes Or 45***02 X2 Wet Brakes. | 1 |
F7-2-1 Differential, Assembly, Trans Build/5
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 14 |
| 13***7Z | Bolt, M10x25 | 14 |
| 13***10 | Bolt | 16 |
F7-2-2 Differential, Assembly, Trans Build/5
| 13***7Z | Bolt, M10x25 | 14 |
| 13***10 | Bolt | 16 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 14 |
F7-1-1 Axle Assembly - Std., Trans Build/5
| 10***01 | Nut | 16 |
| 13***10 | Bolt | 28 |
| 14***09 | Washer | 28 |
F7-1-2 Axle Assembly - Std., Trans Build/5
| 10***01 | Nut | 16 |
| 13***10 | Bolt | 28 |
| 14***09 | Washer | 28 |
G Brakes
G1-1-2 Brake, Transmission, 272b Trans Build, 7x4
| 02***51 | Link | 1 |
| 02***52 | Link | 1 |
| 10***01 | Plate, Lh | 1 |
G1-2-1 Wheel Brakes, German, Austrain
| 13***01 | Bolt | 1 |
| 13***01 | Nut | 1 |
| 14***04 | Washer | 1 |
G1-1-1 Brake, Transmission, 384b Trans Build/3, Manual Build
| 02***48 | Rod | 2 |
| 02***51 | Link | 1 |
| 02***52 | Link | 2 |
G2-1-2 Brake System, Trans Build/5
| 11***01 | Pipe | 1 |
| 11***02 | Pipe | 1 |
| 11***03 | Pipe | 1 |
G2-2-1 Brake Linkage, Trans Build/5
| 13***08 | Screw, Cap | 2 |
| 13***11 | Bolt, M8 X 45, Bolt, M8 X 45; 45mm Long Bolt, (Approx 1 3/4"). Use With Concentric Pump, See T.I. F13/Nam | 2 |
| 13***03 | Nut | 1 |
G2-1-1 Brake System, Trans Build/5
| 11***02 | Pipe | 1 |
| 11***03 | Pipe | 1 |
| 11***04 | Pipe | 1 |
G2-3-2 Brake, Axle, Trans Build/5
| 13***09 | Bolt | 16 |
| 13***07 | Capscrew | 12 |
| 45***01 | Plate, Back | 2 |
G2-4-1 Brake, Parking, Trans Build/5
| 13***10 | Bolt | 4 |
| 14***08 | Washer, Spring | 4 |
| 15***01 | Pivot, Seat; Replaced By Nla, See San 11411 | 1 |
G2-3-1 Brake, Axle, Trans Build/5
| 02***51 | Link | 1 |
| 02***52 | Link | 2 |
| 13***22 | Bolt | 6 |
H Steering & Front Axle
H1-1-1 Axle Assembly, Steering
| 10***04 | Cap, Hub | 1 |
| 10***06 | Plate, Retaining | 1 |
| 10***15 | Washer, Fibre | 2 |
H2-1-1 Circuit, Steering, Manual Trans
| 10***00 | Pipe, Assembly | 1 |
| 10***00 | Pipe | 1 |
| 10***03 | Wheel, Steering | 1 |
H2-2-2 Circuit, Steering, Trans Build/3
| 10***00 | Pipe, Assembly | 1 |
| 10***00 | Column, Steering, Long | 1 |
| 11***01 | Wheel, Steering | 1 |
H2-2-3 Circuit, Steering, Trans Build/5
| 10***00 | Pipe, Assembly | 1 |
| 10***00 | Pipe | 1 |
| 10***00 | Pipe | 1 |
H2-3-1 Steering Column, Trans Build/5
| 11***01 | Wheel, Steering | 1 |
| 11***02 | Nameplate | 1 |
| 11***03 | Clip | 4 |
H2-2-1 Circuit, Steering, Trans Build/3
| 10***00 | Pipe, Assembly | 1 |
| 10***03 | Wheel, Steering | 1 |
| 10***05 | Nameplate, Wheel | 1 |
H3-2-3 Adapters, Steer Pump, Trans Tandem, T/C Trans Build/3
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
H3-3-1 Valve, Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 4 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
H3-5-1 Valve, Steer Relief, Trans Build/3
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 20***00 | Valve, Relief | 1 |
| 20***02 | Valve, Assembly - Pilot | 1 |
H3-4-1 Valve, Shock, Steering, Optional
| 13***0Z | Capscrew | 2 |
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
H3-2-1 Pump, Steering, Trans Tandem, T/C Trans Build/3
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
H3-2-2 Pump, Steering, Trans Tandem, T/C Trans Build/3
| 14***10 | Seal, Dowty | 1 |
| 14***06 | Washer | 4 |
| 20***04 | Dowel | 8 |
H3-1-1 Pump, Steering, Single, Manual Trans & T/C Trans Build/5
| 03***02 | Pump, Steering | 1 |
| 13***30 | Bolt, Long | 4 |
| 14***06 | Washer | 4 |
H4-1-1 Ram, Steering
| 10***16 | Wire | 1 |
| 14***03 | Nipple, Grease | 1 |
| 14***03 | Nipple, Grease, Angled | 1 |
K Engine
K1-6-1 Gears, Oil Pump Drive
| 02***10 | Washer | 1 |
| 02***11 | Spindle | 1 |
| 02***12 | Collar | 1 |
K1-3-1 Crankshaft, Bearings, Pistons, Con-Rods, & Cylinder Liners (Manual & Tc Build/3)
| 02***02 | Shim, 0.004in.(0.102mm) | 0 |
| 02***03 | Shim, 0.005in.(0.127mm) | 0 |
| 02***06 | Crankshaft | 1 |
K1-4-1 Timing Case, Manual Trans, T/C Trans Build/3
| 02***11 | Plate | 1 |
| 02***12 | Jet, Oil Feed | 1 |
| 02***13 | Drive, Tachometer | 1 |
K1-8-1 Flywheel & Housing
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
| 02***56 | Plate | 1 |
K1-3-2 Crankshaft, Bearings, Pistons, Con-Rods, & Cylinder Liners (Tc Build/5)
| 02***01 | Liner, Cylinder | 4 |
| 02***02 | Shim, 0.004in.(0.102mm) | 0 |
| 02***03 | Shim, 0.005in.(0.127mm) | 0 |
K1-1-1 Engine Assembly, Engine Basic
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
K1-4-2 Timing Case, T/C Trans Build/5
| 02***08 | Casing, Timing | 1 |
| 02***09 | Cover, Timing | 1 |
| 02***10 | Plate, Lifting, Front | 1 |
K1-5-1 Timing Gears
| 02***01 | Deflector, Oil | 1 |
| 02***02 | Belt, Drive | 1 |
| 02***04 | Plate | 1 |
K1-2-2 Block Assembly, T/C Trans Build/5
| 02***94 | Tap, Drain | 1 |
| 02***00 | Block, Cylinder | 1 |
| 02***01 | Dowel, Hollow | 2 |
K1-2-1 Block Assembly, Manual Trans, T/C Trans Build/3
| 02***94 | Tap, Drain | 1 |
| 02***01 | Dowel, Hollow | 2 |
| 02***01 | Bush, Camshaft | 1 |
K2-3-1 Covers, Rocker & Tappet
| 02***42 | Cover | 1 |
| 02***44 | Pipe, Vent | 1 |
| 02***45 | Cover, Tappet | 1 |
K2-4-1 Gasket Sets
| 81***04 | Gasket, Decarbonising | 1 |
| 81***05 | Kit-Gasket, Supplementary | 1 |
| 81***68 | Kit-Gasket, Decarbonising | 1 |
K2-1-1 Cylinder Head, Manual Trans, T/C Trans Build/3
| 02***15 | Valve, Inlet | 4 |
| 02***16 | Valve, Exhaust | 4 |
| 02***17 | Spring, Inner | 8 |
K2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***29 | Shaft, Rocker | 2 |
| 02***30 | Lever, Rocker | 8 |
| 02***31 | Spacer, 1/2in.(6.35mm) | 8 |
K2-1-2 Cylinder Head, T/C Trans Build/5
| 02***15 | Valve, Inlet | 4 |
| 02***16 | Valve, Exhaust | 4 |
| 02***17 | Spring, Inner | 8 |
K3-4-1 Heater, Engine Block
| 10***00 | Installation, Heater | 1 |
| 10***03 | Elbow | 1 |
| 10***00 | Pipe, Gas | 1 |
K3-2-1 Filter, Air, Nat/Aspirated
| 13***04 | Bolt | 4 |
| 14***06 | Washer | 4 |
| 22***12 | Clip, Jubilee | 2 |
K3-1-1 Manifold, Induction, Nat/Aspirated
| 02***46 | Adapter | 1 |
| 02***47 | Manifold | 1 |
| 02***24 | Stud | 2 |
K3-5-1 Manifold, Exhaust, & Silencer, Nat/Aspirated, Manual Trans, T/C Build/3
| 02***51 | Nut | 2 |
| 10***07 | Silencer, Exhaust | 1 |
| 10***12 | Pipe, Exhaust Extension | 1 |
K3-3-1 Cold Start Device
| 10***00 | Pump, Cold Start | 1 |
| 25***01 | Container | 1 |
| 25***00 | Pump | 1 |
K3-2-2 Filter, Air, Nat/Aspirated
| 10***00 | Tube | 1 |
| 11***01 | Bracket | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
K3-5-2 Manifold, Exhaust, & Silencer, Nat/Aspirated, T/C Build/5
| 02***51 | Nut | 2 |
| 11***01 | Silencer | 1 |
| 11***02 | Pipe, Exhaust Extension | 1 |
K4-2-2 Radiator, Fittings & Mountings, T/C Trans Build/5
| 10***01 | Radiator | 1 |
| 11***03 | Bracket, Top | 1 |
| 11***04 | Guard, Right Hand | 1 |
K4-2-1 Radiator, Fittings & Mountings, Manual Trans, T/C Trans Build/3
| 10***22 | Guard, Lh | 1 |
| 10***23 | Guard, Rh | 1 |
| 10***00 | Bracket | 1 |
K4-3-2 Radiator, Hoses & Fittings, T/C Trans Build/5
| 02***02 | Belt, Drive | 1 |
| 02***43 | Hose, By-Pass, L Shaped | 1 |
| 11***02 | Bracket | 1 |
K4-1-1 Pump, Water
| 02***52 | Pulley | 1 |
| 02***53 | Spacer, Distance Piece | 1 |
| 02***54 | Body | 1 |
K4-3-1 Radiator, Hoses & Fittings, Manual Trans, T/C Trans Build/3
| 02***43 | Hose, By-Pass, L Shaped | 1 |
| 03***23 | Bottle | 1 |
| 13***08 | Bolt | 2 |
K4-4-1 Thermostat, Housing, Inlet & Outlet
| 02***55 | Connector, Outlet | 1 |
| 02***56 | Thermostat, 82 Degree C | 1 |
| 02***57 | Thermostat, 74 Degree C | 1 |
K5-3-1 Filter, Oil
| 02***01 | Bolt | 1 |
| 02***02 | Collar | 1 |
| 02***03 | Seal | 1 |
K5-1-1 Sump, Oil, Manual Trans Build, T/C Trans Build/3
| 02***24 | Tube, Dipstick | 1 |
| 02***50 | Gasket, Sump | 1 |
| 13***03 | Bolt | 18 |
K5-4-2 Oil Feed Pipework
| 02***67 | Pipe, Overflow | 1 |
| 02***68 | Pipe | 1 |
| 02***04 | Pipe | 1 |
K5-4-1 Oil Feed Pipework
| 02***22 | Banjo | 1 |
| 17***10 | Cover | 1 |
| 81***09 | Bolt, Banjo | 2 |
K5-2-1 Pump, Oil, Manual Trans Build, T/C Trans Build/3
| 02***62 | Shim, .002in (0.51mm) | 0 |
| 02***63 | Shim, .003in.(.076mm) | 0 |
| 02***65 | Strainer | 1 |
K5-1-2 Sump, Oil, T/C Trans Build/5
| 02***59 | Sump | 1 |
| 02***60 | Dipstick | 1 |
| 02***61 | Tube, Guide | 1 |
K5-2-2 Pump, Oil, T/C Trans Build/5
| 02***62 | Shim, .002in (0.51mm) | 0 |
| 02***63 | Shim, .003in.(.076mm) | 0 |
| 02***64 | Pipe, Suction | 1 |
K6-6-1 Filter, Fuel Sediment
| 13***08 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
K6-4-1 Pump, Fuel Lift
| 13***03 | Screw, 1/4 Unf X .625 | 1 |
| 13***06 | Bolt | 2 |
| 14***03 | Washer | 6 |
K6-5-1 Filter, Fuel, Long, Manual Trans Build, T/C Trans Build/3
| 04***86 | Seal | 2 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
K6-5-2 Filter, Fuel, Long, T/C Trans Build/5
| 02***87 | Bracket | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 2 |
| 13***16 | Bolt | 2 |
K6-1-1 Fuel System
| 02***73 | Clamp | 2 |
| 02***74 | Pipe, Nylon | 1 |
| 02***75 | Clip | 1 |
K6-3-1 Injectors, Fuel
| 13***09 | Bolt | 8 |
| 14***05 | Washer; Replaces 82***03 | 8 |
| 17***05 | Nut | 1 |
K6-2-1 Pump, Fuel Injection, Installation
| 02***77 | Bracket, Support | 1 |
| 02***78 | Plug | 1 |
| 02***79 | Hub | 1 |
K6-7-1 Pump, Diesel, Refuelling, Manual
| 10***00 | Pump, Refuelling | 1 |
| 10***02 | Fork | 1 |
| 10***03 | Bush | 2 |
3D-MK3 serial number reference
Locate the manufacturer's identification plate on the machine chassis. Verify the serial number falls within the sourced ranges and confirm applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 0125001 - 0290000 | Applicability for JCB 3D-MK3 Backhoe Dipper Cylinder Seal Kit (Cylinder #562-18500, 562-42300) | |
| 00125001 - 00289999 | Applicability for JCB 3D-MK3 Backhoe Loader Parts Catalogue Manual |
Frequently asked questions
What engine does the JCB 3D-MK3 use?
The JCB 3D-MK3 is equipped with a 57 kW diesel engine.
What is the operating weight of the JCB 3D-MK3?
The shipping weight is 7060 kg with 2WD and standard buckets.
What model replaced the JCB 3D-MK3?
The JCB 3DX series succeeded the 3D-MK3 generation.
What 3D-MK3 owners discuss
What powertrain or hydraulic behavior is typical when the rear of a JCB 3D-MK3 is lower than the front?
Hydraulic functions may operate slowly or not at all due to the suction strainer or pump pickup coming out of the oil. This occurs because the machine has a large hydraulic capacity, and the fluid level drops relative to the pickup point when the rear is depressed. Verify hydraulic oil levels before assuming pump failure. Have your dealer verify the suction hose integrity if levels are correct, as internal collapse of the hose can restrict flow even if the exterior looks normal.
What is a common steering fault on JCB 3D-MK3 machines?
The orbital steering valve is a common failure point and often leaks. It is located on the hydraulic control assembly where the steering wheel attaches directly. If steering response is delayed or weak, check for leaks at this valve and ensure the hydraulic oil level is adequate, as low oil exacerbates steering issues.
What electrical issues affect forward/reverse movement on JCB 3CX/3D models?
Intermittent forward movement is often caused by electrical faults in the shuttle system. The forward/reverse lever operates microswitches that activate hydraulic solenoids on the transmission body. A failed inhibitor switch or bridged wires on the forward microswitch can prevent engagement. Verify solenoid energization with a screwdriver blade; if the reverse solenoid attracts but the forward does not, trace the wiring from the fuse block through the dump relay to the forward solenoid.
What are typical undercarriage or wear patterns for this machine type?
Common wear items include rubbed pipes and worn pins on the linkage. The machine utilizes a hydraulic shuttle transmission which is prone to complex electrical and hydraulic failures compared to manual clutch boxes. Undercarriage wear is typical for earthmoving applications, but specific track shoe or roller wear rates vary by configuration and duty cycle.
What engine specifications are associated with the JCB 3D-MK3 series?
The JCB 3D-MK3 is equipped with a 57 kW diesel engine. Specific engine model designations and serial ranges vary by configuration and series. Do not assume engine specifications from newer 3DX models which use JCB 448 or 444 engines. Verify the exact engine serial and model against the machine PIN.
What are the hydraulic system specifications for the JCB 3D-MK3?
The hydraulic system operates at 3300 psi. The dipper cylinder rod diameter is 2-1/2 inches and the bore is 4-1/2 inches. Serial numbers for the dipper cylinder seal kit application range from OEM part reference to OEM part reference. Fluid specifications vary by configuration; consult the factory spec sheet for the exact hydraulic fluid type required.
What should be checked when buying a used JCB 3D-MK3?
Check the hydraulic oil level and condition, as low oil causes steering and hydraulic sluggishness. Inspect the orbital steering valve for leaks. Verify the forward/reverse microswitches and solenoids for electrical continuity if the machine has a shuttle transmission. Check the suction hose for internal collapse. Inspect linkage pins and pipes for wear. Verify the machine PIN against the dipper cylinder serial range to ensure correct parts availability. Have your dealer verify the transmission solenoid operation and hydraulic pump suction integrity.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 3D-MK3. Related factory variants of the same model family:
3D-MK3
Need a specific 3D-MK3 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.