JCBconstructionbackhoe loader 3cx,4cx,214,215,217
Jcb 3D 1700
Maintenance schedule, common problems & OEM parts breakdown
The JCB 3D 1700 is a backhoe loader positioned in the mid-size class with an operating weight range of approximately 7.5 to 8.0 tons. Production began in 2019, succeeding earlier 3D series variants. The machine is powered by a JCB Dieselmax engine delivering 74 HP and 400 Nm of torque. Configurations include 2WD and 4WD options, with loader bucket capacities around 1.0 cubic meter and backhoe digging depths up to 4.77 meters. The 3D 1700 shares its lineage with the 3DX and 3DX Super models, utilizing similar powertrain architecture and chassis design principles.
Across the 3D series generations, JCB integrated the Dieselmax engine platform to improve fuel efficiency and power density without relying on DEF or DPF regeneration systems. This design choice extends engine oil intervals to 500 hours, a key differentiator in the used market where lower maintenance frequency translates to higher residual value. The 3D 1700 remains relevant in the parts market due to its widespread adoption in municipal and utility applications, creating steady demand for engine components, hydraulic filters, and undercarriage parts across the broader 3D/3DX family.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 3D 1700 specifications
Engine
| Model | JCB 430 |
| Emissions Tier | CEV Stage V |
| Displacement | 3000 cc |
| Gross Power | 37 kW (49 hp) @ 2050 rpm |
| Maximum Torque | 270 Nm @ 1200 rpm |
Weights
| Operating Weight | 7510 kg (16,557 lb) |
Dimensions
| Transport Length | 5900 mm (19 ft 4 in) |
| Width Over Bucket | 2350 mm (7 ft 9 in) |
| Height to Top of Cabin | 2870 mm (9 ft 5 in) |
| Wheelbase | 2170 mm (7 ft 1 in) |
| Minimum Ground Clearance | 310 mm (1 ft 0 in) |
Performance
| Travel Speed | 40 km/h (25 mph) |
| Max Dig Depth | 4770 mm (15 ft 8 in) |
| Max Working Height | 5970 mm (19 ft 7 in) |
| Max Load Over Height | 4180 mm (13 ft 9 in) |
| Loader Dump Height | 2740 mm (9 ft 0 in) |
| Loader Rollback at Ground | 45 degrees |
| Loader Dump Angle | 38 degrees |
| Bucket Rotation | 185 degrees |
| Dipper Tear Out Force | 3257 kgf |
| Max Lift Capacity (Loader) | 1650 kg (3,638 lb) |
| Max Lift Capacity (Backhoe) | 1490 kg (3,285 lb) |
Service capacities (summary)
| Fuel Tank | 128 L (33.8 gal) |
| Hydraulic Oil (System) | 110 L (29.1 gal) |
| Hydraulic Oil (Replacement) | 92 L (24.3 gal) |
| Engine Oil | 15 L (4.0 gal) |
| Coolant | 16.5 L (4.4 gal) |
| Transmission Oil | 17.5 L (4.6 gal) |
| Rear Axle | 20 L (5.3 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
3D 1700 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 17 L (4.5 US gal) | JCB Engine Oil Special 198 (non-DPF) or JCB Advanced engine oil (DPF); viscosity varies by climate per OMM |
| Cooling system | 23 L (6.1 US gal) | Ethylene glycol antifreeze diluted with coolant blend per OMM proportions |
| Fuel tank | 128 L (33.8 US gal) | Diesel fuel |
| Transmission | 21 L (5.5 US gal) | JCB Synchoro Shuttle |
| Hydraulic system and tank | 110 L (29.1 US gal) | JCB Hydraulic Oil the OEM part reference |
| Front axle | 11 L (2.9 US gal) | JCB Gear Oil |
| Rear axle | 20 L (5.3 US gal) | JCB Gear Oil |
| Grease | N/A | JCB boom grease or JCB blue grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 3D 1700 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 3D 1700 beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid analysis at the 500-hour interval is critical for the JCB 3D 1700. Sample engine oil, hydraulic fluid, axle oil, and final drive oil to detect early wear patterns. The Dieselmax engine relies on JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specifications. Monitor hydraulic return filter magnets for metallic debris during every 500-hour service. Interpret subsequent samples against this baseline to predict bearing or seal failures 500 to 800 hours before catastrophic breakdown.
Corrective & Common Repairs
Common repairs on the 3D 1700 involve the Dieselmax engine’s e-Waste Gate Turbocharger, requiring inspection of shaft play and boot integrity at 1000-hour intervals. Injector spray patterns must be checked via diagnostic tool; replace injectors if patterns deviate. Hydraulic system leaks often originate at the kingpost or boom pivot fittings. Inspect hoses for chafing and cylinder rods for scoring. Replace primary and secondary fuel filters promptly to protect common-rail injectors from contamination.
Overhaul & Rebuild Points
The 2000-hour interval marks the primary overhaul threshold for the JCB 3D 1700. Drain and clean the hydraulic tank, then refill with JCB-spec hydraulic oil. Inspect structural welds on the boom, arm, and chassis for cracking or unauthorized modifications. Measure swing ring play on excavator variants using dial indicators. Check brake disc wear and immersed brake condition. Service the cab HVAC system, including A/C pressure and evaporator condition, to maintain operator comfort and system efficiency.
Seasonal & Environment Servicing
JCB 3D 1700 maintenance intervals are additive; every 500-hour service includes 100-hour tasks, and every 1000-hour service includes all prior intervals. In cold climates, verify coolant mixture and battery electrolyte levels. In dusty environments, inspect air filter restriction indicators more frequently. Grease all pivot points including boom, arm, bucket, and stabilizer pivots every 50 hours or weekly. Ensure track tension is correct to prevent accelerated wear on rollers and idlers during heavy earthmoving operations.
3D 1700 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/400101 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 01/111100R | Engine, Imperial, 4.236 Compensated | Fuel system service | Check fitment → |
| 01/107400R | Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated | Fuel system service | Check fitment → |
| 02/100182 | Pipe, Assembly, Fuel, L/Pump To Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3D 1700 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Fuel filter blockage or lift pump failure | Check fuel filters and pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Coolant temperature sensor fault or wiring short | Inspect sensor circuit and coolant level |
| P0521 | Engine oil pressure sensor range/performance issue | Oil pressure sensor malfunction | Test sensor resistance and oil level |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Reductant injector circuit failure | Inspect injector wiring and connections |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus communication failure | Check battery voltage and ground straps |
| 101 | Low transmission clutch pressure detected | Transmission pressure fault | Check transmission fluid level and pressure |
| F01 | Engine control module failure | ECU hardware or connection fault | Check ECU connections |
| E420 | Low hydraulic pressure | Hydraulic system leak or pump issue | Refill fluid and check for leaks |
| E512 | Low voltage detected | Battery or charging system fault | Charge or replace battery |
| D901 | Communication error with display unit | CAN bus wiring fault | Inspect CAN bus wiring |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3D 1700 attachments & work tools
Backhoe Buckets
Standard backhoe buckets are available in widths of 305 mm (12 in), 610 mm (24 in), and 914 mm (36 in). These buckets utilize a 45 mm pin interface and are compatible with the JCB 3D series frame. Hardened cutting edges and side cutters are standard construction features for durability.
Loader Buckets
Loader buckets range from 1.0 m³ (1.3 yd³) to 1.1 m³ (1.4 yd³) capacity depending on the specific configuration. The standard shovel width is 2.35 m (7 ft 9 in) for the 3DX class, which shares data with the 3D model. Bucket types include Deep Profile, Ditch Maintenance, Grading, and Heavy Duty variants.
Quick Hitches
OEM quick hitches are available for both the front loader and rear backhoe to reduce attachment swap time. The system allows for rapid tool changes without leaving the cab, enhancing productivity on job sites. Compatibility extends to competitor machines as well as JCB backhoe loaders.
Hydraulic Breakers
JCB offers an OEM hydraulic breaker range designed for demolition and trenching applications. These breakers are compatible with backhoe loaders and require high-flow hydraulic connections. The attachment reduces manual labor and accelerates concrete breaking tasks.
Tilt Rotators
Tilt rotators enable attachments to tilt up to 45 degrees and rotate 360 degrees for multi-directional movement. The integrated hydraulic system provides precise control for grading, trenching on slopes, and material handling. This accessory eliminates the need to reposition the machine for complex tasks.
Specialist Attachments
Available specialist tools include earth drills (augers), hydraulic thumbs, forks, and grabs. These attachments enhance versatility for forestry, lifting, and material handling tasks. The range is designed to work in harmony with the machine's hydraulic system for optimal performance.
All 3D 1700 assemblies by section
Every catalogued assembly group for the Jcb 3D 1700. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-3-4 Fork Lift, Shovel Mounted, (42")
| 12***02 | Plate | 2 |
| 12***03 | Plate | 1 |
| 13***24 | Bolt | 2 |
A1-3-1 Fork Lift, Shovel Mounted
| 12***00 | Kit-Fork Lift, Shovel, Std | 1 |
| 12***00 | Fork | 4 |
| 12***01 | Gusset, Standard Shovel | 2 |
A1-4-1 Crane Hook
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***39 | Attachment, Crane Hook Assembly, Fork Mounted | 1 |
A1-3-2 Fork Lift, Shovel Mounted
| 12***00 | Fork, Lift, -3c/3cx/3d | 1 |
| 12***01 | Gusset | 4 |
| 12***00 | Fork | 2 |
A1-2-2 Shovel, Clam, 6 In 1, 1.2 Cu.Yd.
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-1-1 Shovel
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***18 | Spacer | 4 |
A1-2-1 Shovel, Clam, 6 In 1, 1.0 Cu.Yd
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-2-3 Shovel, Clam, 6 In 1, 1.1 Cu.Yd.
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-3-3 Fork Lift, 6 In 1 Clam Shovel, Mounted (42")
| 12***00 | Fork, Shovel Mounted | 1 |
| 12***00 | Fork | 2 |
| 12***00 | Bracket | 2 |
A2-1-1 Bucket
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt | 6 |
A2-5-1 Attachments, Jaw Bucket
| 10***48 | Pin, Pivot | 1 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 6 |
A2-2-1 Attachments, Backhoe, Ripper Tooth,B.Blade, Bucket,Clay,Square Hole,T.Ditching
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-4-1 Bucket, Jaw, 460mm Wide, Jaw, 600mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-3-1 Blade, Ditch Cleaning
| 13***12 | Bolt | 3 |
| 13***2Z | Bolt | 3 |
| 13***1Z | Nut | 0 |
A2-4-2 Bucket, Jaw, 305mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-1-2 Bucket
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt | 6 |
A3-1-2 Roadbreaker, Installation, 4wd
| 10***06 | Lock; Supply 12***71 | 1 |
| 11***09 | Washer | 3 |
| 12***00 | Pipe | 1 |
A3-3-1 Roadbreaker, Stanley
| 12***00 | Breaker, Road | 1 |
| 12***01 | Handle | 1 |
| 12***02 | Grab | 1 |
A3-4-1 Roadbreaker, Steels, Stanley
| 99***14 | Pad, Rammer | 1 |
| 99***15 | Tool, Moil, Tool, Moil; 380mm Long Below Collar. 160mm (6 1/4") Long Above Collar | 1 |
| 99***16 | Tool, Chisel, Narrow | 1 |
A3-2-1 Roadbreaker, Hose Reel
| 12***01 | Plate, Side | 2 |
| 12***02 | Plate | 1 |
| 12***03 | Block | 1 |
A3-1-1 Roadbreaker, Installation, 2wd
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Carrier | 1 |
| 12***00 | Carrier | 1 |
B Bodywork, Cab, Loader End
B1-5-1 Bonnet
| 12***00 | Hinge, Assemble | 2 |
| 12***00 | Stay | 1 |
| 12***00 | Stay, Assembly | 1 |
B1-1-1 Mainframe, 7'4" Sideshift
| 10***06 | Spacer | 1 |
| 10***19 | Boss | 1 |
| 11***09 | Washer | 8 |
B1-4-2 Stabiliser, Centremount
| 10***04 | Collar | 2 |
| 12***00 | Leg, Stabiliser | 2 |
| 12***00 | Leg, Stabiliser, Lh | 1 |
B1-2-1 Tank, Hydraulic, Fitting
| 12***03 | Indicator | 1 |
| 12***05 | Indicator | 1 |
| 12***00 | Cover | 1 |
B1-4-3 Stabiliser, Centremount
| 10***30 | Pin, Pivot | 2 |
| 10***04 | Collar | 2 |
| 12***01 | Foot, Rubber | 2 |
B1-3-1 Tank, Diesel Fuel, Fittings
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Cap, Filler | 1 |
| 12***00 | Tube, Filler | 1 |
B1-4-1 Stabiliser, Sideshift
| 10***10 | Pin, Pivot | 1 |
| 10***37 | Pin, Pivot | 2 |
| 10***02 | Foot; Replaced By 12***66, See San04389 | 2 |
B1-1-7 Mainframe, Centremount
| 12***00 | Grille | 1 |
| 12***02 | Guard, Mesh | 1 |
| 12***04 | Spacer | 4 |
B1-1-4 Mainframe, Loader
| 11***09 | Washer | 4 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***00 | Grille | 1 |
B1-1-3 Mainframe, Centremount
| 11***09 | Washer | 8 |
| 12***00 | Grille | 1 |
| 12***02 | Guard, Mesh | 1 |
B1-1-2 Mainframe, 8'0" Sideshift
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B2-5-1 Basic Seat
| 12***00 | Housing | 1 |
| 12***00 | Riser, Seat, Assembly | 1 |
| 12***03 | Cushion | 1 |
B2-2-2 Cab Glass
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 1 |
| 12***01 | Bracket | 1 |
B2-5-3 Basic Seat
| 12***10 | Cushion, Brown, Vinyl | 1 |
| 12***11 | Cushion, Brown, Vinyl | 1 |
| 12***00 | Lever | 1 |
B2-3-3 Cab
| 12***01 | Bracket, Interior Light | 1 |
| 12***02 | Cap | 4 |
| 12***05 | Bolt, Closing | 1 |
B2-4-1 Wash/Wipe, Windscreen
| 12***00 | Pump, And Reservoir | 1 |
| 12***01 | Jet | 1 |
| 12***00 | Pump, And Reservoir | 1 |
B2-2-1 Cab Glazing
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***03 | Lining, Roof | 1 |
| 12***00 | Mirror | 2 |
B2-3-2 Canopy
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 2 |
| 12***01 | Bracket | 1 |
B2-3-1 Cab Shell, Unglazed
| 12***00 | Door, Lh | 1 |
| 12***00 | Door, Rh | 1 |
| 12***00 | Roof | 1 |
B2-6-1 Soundproofing, Engine
| 12***00 | Panel, Engine, Lh | 1 |
| 12***00 | Panel, Engine, Rh | 1 |
| 12***01 | Mat | 2 |
B2-1-1 Soundproofing, Cab Base
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***02 | Mat | 1 |
B3-2-1 Arms, Loader, Parallel Lift
| 10***15 | Pin, Pivot, 165mm Long | 2 |
| 10***21 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 8 |
B4-1-3 Kingpost Carriage, Centremount
| 12***05 | Pin, Lock | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Carriage | 1 |
B4-4-3 Boom
| 10***16 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-3-2 Kingpost
| 10***16 | Pin, Pivot | 1 |
| 11***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-1-1 Kingpost Carriage, Sideshift
| 12***05 | Pin, Lock | 1 |
| 12***07 | Plate | 1 |
| 12***13 | Shaft | 1 |
B4-6-1 Dipper (Stick), Extending
| 10***25 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-4-4 Boom
| 10***23 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 12***00 | Boom, 2200 M.M. Long | 1 |
B4-4-1 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-1-2 Kingpost Carriage, Centremount
| 12***05 | Pin, Lock | 1 |
| 12***13 | Shaft | 1 |
| 12***20 | Carriage | 1 |
B4-2-2 Slew/Swing, Components
| 12***06 | Bearing | 1 |
| 12***14 | Rack | 1 |
| 12***00 | Plate | 1 |
B4-5-3 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***43 | Pin, Pivot | 1 |
B4-6-2 Dipper (Stick), Extending
| 10***32 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-2-1 Slew/Swing, Components
| 12***03 | Pin | 1 |
| 12***06 | Bearing | 1 |
| 12***12 | Gear, Pinion | 1 |
B4-4-2 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-5-1 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-3-1 Kingpost
| 10***16 | Pin, Pivot | 1 |
| 10***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-5-2 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B5-1-1 Paint And Transfers
| 33***15 | Label, On Off, Hydraulic Tools | 1 |
| 33***22 | Label, Warning, Lights | 1 |
| 33***23 | Label, Warning, Lights | 1 |
B5-3-1 Tool Kit, Supplementary
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
| 82***05 | Spanner, 11/16" X 3/4" A/F, D.O.E. | 1 |
B5-4-1 Fire Extinguisher
| 13***02 | Nut | 2 |
| 14***05 | Screw, Self Tapping | 2 |
| 25***00 | Extinguisher, Fire | 1 |
B5-2-1 Tool Kit, Standard
| 27***00 | Bag, Tool | 1 |
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
C Electrics-Machine, Cab & Engine
C1-2-2 Side & Rear Lights
| 10***01 | Spring, 24" Bungy | 1 |
| 12***00 | Bracket, Rh | 1 |
| 12***00 | Bracket, Lh | 1 |
C1-1-1 Electrical Equipment, Cab
| 12***01 | Cover, Front | 1 |
| 12***02 | Cover, Rear | 1 |
| 12***01 | Bracket | 2 |
C1-2-1 Side & Rear Lights
| 10***01 | Spring, 24" Bungy | 1 |
| 70***00 | Light, Side Front, Supplied Without Bulbs | 2 |
| 70***01 | Lens | 1 |
C1-5-1 Pump, Diesel, Refuelling
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-3-1 Light, Head, Working
| 70***01 | Light, Right Hand Dip, European & France | 2 |
| 70***00 | Light, Sealed, Left Hand Dip | 2 |
| 70***00 | Body | 2 |
C2-6-1 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-5-2 Motor, Starter, Service Option
| 71***00 | Motor, Starter | 1 |
| 71***01 | Bearing | 1 |
| 71***02 | Bracket, End | 1 |
C2-4-1 Alternator
| 02***28 | Pulley | 1 |
| 71***01 | Regulator | 1 |
| 71***02 | Rotor, Assembly | 1 |
C2-1-1 Electrics, Engine
| 02***23 | Switch, Oil Pressure | 1 |
| 04***76 | Switch, Isolating | 1 |
| 04***99 | Switch, Neutral Start | 1 |
C2-5-4 Motor, Starter, M127 12.Volt, 4.236 Engines
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Nut | 3 |
C2-4-2 Alternator
| 71***06 | Kit-Bearing, Drive End | 1 |
| 71***00 | Alternator; Lucas Ref 24037. Type Of Alternator Best Identified By Lucas Ref.Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref. Stamped On Tag At Pulley End., Alternator; Lucas Ref. 24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator | 1 |
| 71***01 | Cover | 1 |
C2-7-1 Warning System -, Powerbreaker
| 14***19 | Seal, Dowty | 1 |
| 24***12 | Grommet | 1 |
| 70***00 | Light, Warning | 1 |
C2-4-4 Alternator, A127-45amp 12.Volt, 4.236 Engines
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-5-1 Motor, Starter
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 70***01 | Bracket, Commutator End | 1 |
C2-6-3 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-2-1 Battery 12v, Carrier, Standard
| 10***00 | Clamp | 1 |
| 12***01 | Tray | 1 |
| 12***02 | Tray | 1 |
C2-3-3 Alternator Mountings
| 02***76 | Spacer | 1 |
| 02***92 | Washer | 3 |
| 02***43 | Bracket, Alternator Mounting | 1 |
C2-3-1 Alternator Mountings, 4.98nt Engine
| 02***88 | Bracket, Support | 1 |
| 02***89 | Tube, Spacer | 1 |
| 02***90 | Link, Adjusting | 1 |
C2-3-4 Alternator Mountings
| 02***76 | Spacer | 1 |
| 02***01 | Lever, Alternator Adjusting | 1 |
| 02***02 | Bracket, Alternator Mounting | 1 |
C2-4-3 Alternator, A127-45amp 12.Volt, Blmc 4.98 Engines
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-8-1 Installation, Reverse Alarm, Optional
| 13***02 | Nut, Lock | 1 |
| 14***14 | Washer, Star | 1 |
| 70***00 | Switch | 1 |
C2-3-2 Alternator Mountings, 4.236 Engine
| 02***73 | Bracket, Alternator Mounting | 1 |
| 02***74 | Bracket, Alternator Support | 1 |
| 02***75 | Lever, Alternator Adjusting | 1 |
C2-5-5 Motor, Starter, M127 12.Volt, 4.236 Engines
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-5-3 Starter Motor, Type M127 - 12.Volt, Blmc 4.98 Engines, (Alternative)
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 3 |
C3-2-2 Instrument Panel
| 12***05 | Cover | 1 |
| 12***06 | Cover | 1 |
| 12***00 | Cable, Control | 1 |
C3-1-1 Switch, Column
| 11***01 | Key, German | 2 |
| 12***09 | Cover | 1 |
| 12***12 | Cover | 1 |
C3-2-1 Instrument Panel
| 12***03 | Cover | 1 |
| 12***04 | Bracket | 1 |
| 12***06 | Cover | 1 |
D Controls-Machine, Engine & Steering
D1-3-2 Foot Pedal Controls, - Aux. Valve
| 12***00 | Lever | 1 |
| 12***00 | Bracket | 1 |
| 12***01 | Bar, Locking | 1 |
D1-1-1 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***05 | Joint, Universal | 2 |
| 10***06 | Joint, Ball | 1 |
D1-2-3 Controls, Excavator, Standard
| 10***01 | Knob, Large Dia. | 2 |
| 10***06 | Joint, Ball | 2 |
| 12***02 | Band, Retaining | 1 |
D1-2-1 Controls, Excavator, Standard
| 10***01 | Knob, Large Dia. | 2 |
| 10***05 | Joint, Universal | 1 |
| 10***06 | Joint, Ball | 1 |
D1-4-1 Installation, Shovel Reset
| 12***00 | Bracket | 1 |
| 12***01 | Bar | 1 |
| 12***02 | Bracket, Saddle | 2 |
D1-3-3 Foot Pedal Controls, - Aux. Valve
| 12***01 | Bar, Locking | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Bracket | 1 |
D1-1-3 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
D2-2-1 Control, Parking Brake
| 12***05 | Bracket | 1 |
| 12***01 | Plate | 1 |
| 12***02 | Plate | 1 |
D2-1-1 Control Pedal, Brake
| 10***01 | Knob, Large Dia. | 1 |
| 12***04 | Pin, Pivot | 1 |
| 12***06 | Plate, Lock | 1 |
D3-1-3 Throttle Controls, 4.236 Engine
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
D3-2-1 Controls 2wd, Forward & Reverse, Transmission Dump
| 12***05 | Pin, Pivot | 1 |
| 12***00 | Pedal | 1 |
| 12***1P | Bracket | 1 |
D3-2-2 Controls 4wd, Forward & Reverse, Transmission Dump, 2/4wd Selector
| 12***00 | Pedal | 1 |
| 12***01 | Bracket | 1 |
| 12***02 | Bracket | 1 |
D3-1-1 Throttle Controls, Blmc 4.98 Engine
| 02***82 | Spring | 1 |
| 10***00 | Bracket | 1 |
| 10***01 | Bracket | 1 |
E Hydraulics & Air Including, Steering
E1-7-1 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***05 | Seal | 1 |
| 12***01 | Housing | 4 |
E1-5-4 Circuit, Backhoe, Standard Dipper, Centremount/7
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 3 |
| 61***00 | Hose | 2 |
E1-6-9 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift/7
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-6-3 Circuit, Auxiliary, Backhoe, Standard Dipper, Centermount
| 12***07 | Guide | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-6 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-8-2 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-6-2 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-4 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-3-2 Circuit, Auxiliary, Loader Arm, Self Level
| 12***02 | Plate | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-1-2 Circuit, Neutral, Twin Pump, Extending Dipper & Breaker
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-3-4 Circuit, Auxiliary, Loader Arm, Self Level
| 13***08 | Bolt | 2 |
| 13***12 | Bolt | 1 |
| 14***03 | Washer | 3 |
E1-5-5 Circuit, Backhoe, Standard Dipper, Centremount/7
| 12***00 | Pipe | 1 |
| 13***04 | Bolt | 2 |
| 13***03 | Nut | 1 |
E1-7-2 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***01 | Housing | 4 |
| 12***00 | Bracket, Support | 1 |
E1-4-1 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-4-5 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-2 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-5-3 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Hose | 1 |
| 13***03 | Nut | 2 |
E1-1-1 Circuit, Neutral, Single Pump
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-6-1 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe, Assembly | 1 |
| 12***00 | Pipe | 1 |
E1-8-4 Circuit, Backhoe, Extradig Dipper, Centremount 1550/1900
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 13***04 | Bolt | 2 |
E1-2-2 Circuit, Loader Arm, Self Level
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 13***08 | Bolt | 6 |
E1-4-8 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-7 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-1-5 Neutral Circuit, Auxiliary Valve, Powerbreaker
| 13***05 | Bolt | 3 |
| 14***19 | Seal, Dowty | 1 |
| 14***26 | Washer, Seal | 2 |
E1-5-1 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 2 |
| 61***00 | Hose | 2 |
E1-5-2 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 1 |
| 61***00 | Hose, 1/4"Bsp X 1200mm | 2 |
E1-8-3 Circuit, Backhoe, Extradig Dipper, Centremount 1400/1600
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Pipe, Rh | 2 |
E1-1-4 Circuit, Roadbreaker
| 12***02 | Plate | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
E1-6-4 Circuit, Auxiliary, Backhoe, Standard Dipper, Centermount
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-8-1 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-4-3 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-2-4 Hose And Pipework, Loader Arm, Self Level
| 12***00 | Pipe, Assembly | 1 |
| 13***08 | Bolt | 2 |
| 13***03 | Nut | 2 |
E1-1-3 Neutral Circuit, Loading Shovel
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E2-1-1 Pump, Main Hydraulic, Single, Standard
| 13***10 | Bolt | 4 |
| 13***03 | Nut | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
E2-2-1 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***10 | Bolt | 4 |
| 13***14 | Bolt | 2 |
| 13***03 | Nut | 2 |
E2-3-1 Shaft, Pump Drive
| 11***02 | Adapter, Drive | 1 |
| 12***02 | Adapter, Drive | 1 |
| 13***06 | Bolt | 4 |
E3-2-2 Valve, Relief, Check & Overload, Loader Valve
| 13***02 | Nut | 1 |
| 24***07 | O Ring | 1 |
| 24***11 | O Ring | 2 |
E3-5-2 Valve, Assembly, Excavator, Sideshift
| 12***00 | Restrictor | 2 |
| 13***34 | Bolt | 2 |
| 13***03 | Nut | 1 |
E3-5-1 Valve, Assembly, Excavator, Centremount
| 13***34 | Bolt | 1 |
| 13***01 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 12 |
E3-2-6 Valve, Relief, Loader Valve
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
E3-2-3 Valve, Spool, Standard, Loader Valve
| 24***07 | O Ring | 2 |
| 25***09 | O Ring | 2 |
| 25***18 | Spacer | 2 |
E3-2-1 Loader Valve M.R.V.
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 2 |
| 25***01 | Nut | 1 |
E3-6-2 Valve, Components, Excavator
| 24***07 | O Ring | 12 |
| 24***17 | O Ring | 7 |
| 92***22 | Seal, Wiper | 6 |
E3-6-4 Valve, Rotary Clamp
| 14***11 | Seal, Bonded | 1 |
| 24***15 | O Ring | 1 |
| 92***54 | O Ring | 1 |
E3-8-1 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***17 | Element, Spin-On Canister | 1 |
E3-4-1 Components, Auxiliary Valve
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 2 |
| 24***16 | O Ring | 1 |
E3-3-1 Valve, Auxiliary, & Adapters
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***04 | Adapter, Male/Male | 4 |
E3-2-4 Valve, Spool, Mechanical Detent, Loader Valve
| 24***05 | O Ring | 1 |
| 24***20 | O Ring | 2 |
| 24***07 | O Ring | 1 |
E3-7-1 Filter, Hydraulic
| 13***01 | Plug, Drain | 1 |
| 13***01 | Nut | 2 |
| 14***11 | Seal, Bonded | 1 |
E3-2-5 Valve, Spool, Electric Detent, Loader Valve
| 24***07 | O Ring | 2 |
| 25***09 | O Ring | 2 |
| 25***18 | Spacer | 2 |
E3-6-1 Valve, Components, Excavator
| 13***06 | Bolt | 12 |
| 24***14 | O Ring | 1 |
| 24***04 | O Ring | 1 |
E3-1-1 Valve, Loader
| 12***01 | Mounting, Rubber | 3 |
| 13***30 | Bolt | 1 |
| 13***03 | Nut | 6 |
E3-6-3 Valve, Section, Excavator Valve, Seventh Spool
| 24***15 | O Ring | 1 |
| 24***11 | O Ring | 1 |
| 91***00 | Valve, Section, Assembly | 1 |
E3-5-3 Valve, Assembly, Excavator, Centremount, Sideshift
| 12***00 | Restrictor | 3 |
| 13***34 | Bolt | 1 |
| 13***36 | Bolt | 1 |
E4-2-6 Ram, Dipper
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-4-2 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-2-7 Ram, Dipper
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-3 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-1 Ram, Stabiliser, Sideshift
| 55***01 | Head, Piston | 1 |
| 55***00 | Rod, Piston | 1 |
| 55***01 | Cap, End | 1 |
E4-2-7 Ram, Boom Standard
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-7 Ram, Bucket, Extradi, G Dipper
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-6 Ram, Stabiliser, Sideshift, With Check Valve
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E4-4-1 Ram, Attachment
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 12***22 | Bush | 1 |
E4-2-5 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 2 |
| 14***01 | Washer, Aluminium | 1 |
E4-1-4 Ram, Shovel, Loader, Lift
| 12***15 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-2-1 Ram, Dipper
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-6-2 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***16 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E4-1-2 Ram, Loader Lift Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-1-2 Ram, Shovel, Loader, Lift
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-2 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-4-3 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-2-2 Ram, Boom Standard
| 12***15 | Bush | 2 |
| 12***21 | Bush | 2 |
| 12***17 | Bush | 2 |
E4-5-2 Seal Kits, Extension Ram, Jaw Bucket
| 21***13 | Pin, Cotter, Split | 1 |
| 21***16 | Pin, Split | 1 |
| 24***26 | O Ring, 4.00in | 1 |
E4-1-4 Ram, Loader Lift Arm
| 12***15 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-3-7 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***29 | Bracket | 2 |
E4-2-8 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-6-3 Valve, Ram Lockout, Check
| 13***30 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
E4-6-1 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 24***09 | O Ring | 1 |
| 24***13 | O Ring | 2 |
E4-2-2 Ram, Bucket, Extradi, G Dipper
| 12***15 | Bush | 2 |
| 12***21 | Bush | 2 |
| 12***17 | Bush | 2 |
E4-2-7 Ram, Bucket, Mono Di, Pper
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-2 Ram, Bucket, Mono Di, Pper
| 12***15 | Bush | 2 |
| 12***21 | Bush | 2 |
| 12***17 | Bush | 2 |
E4-2-1 Ram, Boom Standard
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-3 Ram, Stabiliser, Sideshift, With Check Valve
| 55***01 | Head, Piston | 1 |
| 55***00 | Rod, Piston | 1 |
| 55***01 | Cap, End | 1 |
E4-6-4 Valve, Check
| 13***06 | Bolt | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***04 | Washer | 2 |
E4-2-9 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-2 Ram, Dipper
| 12***15 | Bush | 2 |
| 12***21 | Bush | 2 |
| 12***17 | Bush | 2 |
E4-2-6 Ram, Bucket, Extradi, G Dipper
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-6 Ram, Bucket, Mono Di, Pper
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-4 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-1 Ram, Bucket, Extradi, G Dipper
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-5-1 Seal Kits, Backhoe Rams
| 24***01 | O Ring | 1 |
| 24***15 | O Ring | 1 |
| 24***18 | O Ring | 1 |
E4-3-4 Ram, Stabiliser, Sideshift
| 55***01 | Cap, End | 1 |
| 55***02 | Head, Piston | 1 |
| 55***00 | Ram, Stabiliser, Sideshift; Standard. X= Early Type See E4-3-1. Y= Later Type See List Below., Ram, Stabiliser, Sideshift | 1 |
E4-2-6 Ram, Boom Standard
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-5 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***11 | Seal, Bonded | 4 |
E4-2-1 Ram, Bucket, Mono Di, Pper
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
F Axles, Wheels & Transmission
F1-4-1 Mountings, 498 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 1 |
| 12***00 | Mounting | 1 |
F1-1-1 Gearbox Housing
| 05***01 | Gasket | 1 |
| 05***02 | Cover; N.L.A. Recommend Customer Go'S To Used Parts, Dealer. B Borsley'S Requested This. | 1 |
| 05***03 | Bolt | 6 |
F1-2-1 Gear Change
| 05***16 | Rod | 1 |
| 05***17 | Spring | 1 |
| 05***18 | Ball | 2 |
F1-4-2 Mountings, 4.236 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
F1-3-1 Gearbox Components
| 05***55 | Shim, 0.003in | 0 |
| 05***06 | Seal, Oil | 1 |
| 05***08 | Seal, Oil | 2 |
F2-1-1 Transmission, Shuttle Reverser
| 04***47 | Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve., Lowing Parts 81***78 + 04/50***01 Ti Gen046. W When Fitting New Housing Please Order The Fol, Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve. | 1 |
| 04***48 | Sleeve | 1 |
| 04***49 | Ring, Spacer | 1 |
F2-5-2 Flywheel & Housing, 4.236 Engine
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
F2-4-1 Valve, Shuttle
| 04***58 | Spring | 1 |
| 04***59 | Valve, Assembly, Forward/Reverse | 1 |
| 04***61 | Seal | 1 |
F2-6-1 Circuit, Oil Cooler, Torque Converter
| 04***90 | Pipe; Use 04/50***04. | 1 |
| 04***91 | Elbow | 1 |
| 04***92 | Pipe | 1 |
F2-3-1 Clutch, Reverse, & Drive Pump
| 04***01 | Seal | 2 |
| 04***02 | Bearing | 1 |
| 04***03 | Carrier, Assembly | 1 |
F2-5-1 Flywheel & Housing, 498 Engine
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
F2-8-1 Filter
| 02***09 | Seal | 1 |
| 32***00 | Filter | 1 |
| 98***38 | Element, Oil Filter | 1 |
F2-7-1 Propshaft, Transmission Drive
| 13***12 | Bolt | 8 |
| 13***03 | Nut | 8 |
| 14***03 | Nipple, Grease | 1 |
F2-2-1 Forward Clutch
| 04***01 | Seal | 2 |
| 04***20 | Gear, Drive | 1 |
| 04***21 | Gear, Hub | 1 |
F3-3-3 Crown Wheel & Pinion
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-4-1 Wheels & Tyres - 2wd
| 10***01 | Nut | 16 |
| 41***00 | Wheel | 2 |
| 41***00 | Wheel, Centre, W15lx24 | 1 |
F3-1-3 Axle Assembly, 15.587 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F3-2-3 Differential, Assembly
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F4-2-1 Differential, Housing Assembly, 4wd
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F4-3-1 Crown Wheel & Pinion, 4wd
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F4-4-1 Propshafts, Axle Drive 4wd
| 12***01 | Strap | 1 |
| 12***02 | Plate | 1 |
| 12***03 | Clip, Steady | 1 |
F4-5-1 Wheels & Tyres - 4wd
| 10***14 | Nut | 12 |
| 10***15 | Washer | 12 |
| 10***01 | Nut | 26 |
F4-1-1 Axle Assembly, 4wd
| 10***01 | Nut | 16 |
| 13***09 | Bolt | 28 |
| 13***52 | Bolt | 4 |
G Brakes
G1-1-1 Brake System
| 12***00 | Pipe, Rh | 1 |
| 12***00 | Pipe, Lh | 1 |
| 12***00 | Pipe, Rh | 1 |
G1-3-1 Brake, Parking
| 13***10 | Bolt | 4 |
| 14***08 | Washer, Spring | 4 |
| 15***01 | Pivot, Seat; Replaced By Nla, See San 11411 | 1 |
G1-2-1 Brake Assembly
| 13***09 | Bolt | 16 |
| 13***07 | Capscrew | 12 |
| 45***01 | Plate, Back | 2 |
H Steering
H1-7-2 Ram, Steering, 2wd
| 13***10 | Bolt | 2 |
| 13***16 | Bolt | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-2-1 Circuit, Steering
| 14***11 | Seal, Bonded | 1 |
| 61***00 | Hose; See Note 1. Kit Is Supplied With Connection Hoses 61***00, Hose; See Note 1. Kit Is Supplied With Hoses 61***00, Hose | 2 |
| 61***00 | Hose | 1 |
H1-3-1 Steering Column
| 11***03 | Clip | 4 |
| 12***03 | Mounting | 1 |
| 12***06 | Washer, Grooved | 1 |
H1-4-2 Pump, Steering, 4.236 Engine
| 12***02 | Gear | 1 |
| 13***12 | Bolt | 1 |
| 13***18 | Bolt | 2 |
H1-5-1 Valve, Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 2 |
| 16***10 | Adapter | 2 |
H1-7-1 Ram, Steering, 2wd
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***56 | Circlip | 1 |
| 24***15 | O Ring | 1 |
H1-3-2 Steering Column
| 11***03 | Clip | 4 |
| 12***08 | Spacer | 2 |
| 12***01 | Wheel, Steering; Re J Smith Is Only Available From Manufacture, In Qty Of 500 Use 11***22, 11***08 | 1 |
H1-4-1 Pump, Steering, 4.98nt Engine
| 03***02 | Pump, Steering | 1 |
| 13***30 | Bolt, Long | 4 |
| 14***06 | Washer | 4 |
H1-6-1 Valve, Shock, Steering, Optional
| 13***10 | Screw, Cap | 2 |
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
H1-1-1 Axle Assembly
| 12***01 | Pin, King | 2 |
| 12***02 | Pin, Cotter | 2 |
| 12***03 | Axle, Stub | 2 |
H1-2-2 Circuit, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H2-1-1 Axle Assembly, 4wd, Steering
| 10***00 | Axle, Assembly, Steering | 1 |
| 10***01 | Casing | 1 |
| 10***03 | Pin, Pivot | 2 |
H2-2-1 Knuckle, Steering, 4wd Axle
| 10***02 | Pin, King | 4 |
| 10***05 | Seal | 4 |
| 10***06 | Shim, 0.1 | 4 |
H2-8-4 Differential, Assembly, 4wd Axle
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing | 1 |
| 10***02 | Stud | 4 |
H2-8-1 Axle Assembly
| 12***01 | Pin, Lock | 2 |
| 13***28 | Bolt | 1 |
| 13***05 | Bolt | 2 |
H2-5-1 Differential, Assembly, 4wd Axle
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing | 1 |
| 10***02 | Flange | 1 |
H2-8-2 Knuckle, Steering, 4wd Axle
| 12***01 | Pin, Lock | 2 |
| 13***05 | Bolt | 2 |
| 13***08 | Bolt | 16 |
H2-4-1 Differential, Housing Assembly
| 10***01 | Housing | 1 |
| 10***02 | Bracket | 1 |
| 10***03 | Flange | 1 |
H2-3-1 Hub & Components
| 10***14 | Nut | 12 |
| 10***15 | Washer | 12 |
| 10***17 | Nipple | 4 |
H2-7-2 Circuit, Steering, 4wd
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H2-6-1 A
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***56 | Circlip | 1 |
| 24***15 | O Ring | 1 |
H2-6-2 Ram, Steering, 4wd, Jcb Axle
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
| 24***06 | O Ring | 1 |
H2-7-1 Circuit, Steering, 4wd
| 14***11 | Seal, Bonded | 1 |
| 61***00 | Hose | 2 |
| 61***00 | Hose | 1 |
H2-8-3 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 32 |
| 13***08 | Bolt | 12 |
K Engine, 4.98nt, To M298602
K1-2-1 Block Assembly
| 02***94 | Tap, Drain | 1 |
| 02***00 | Block, Cylinder | 1 |
| 02***01 | Dowel, Hollow | 2 |
K1-1-0 Engine Build, Identification
K1-8-1 Flywheel & Housing, 4.98 Engine
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
K1-4-1 Timing Case
| 02***08 | Casing, Timing | 1 |
| 02***09 | Cover, Timing | 1 |
| 02***10 | Plate, Lifting, Front | 1 |
K1-6-1 Gears, Oil Pump Drive
| 02***10 | Washer | 1 |
| 02***11 | Spindle | 1 |
| 02***12 | Collar | 1 |
K1-7-1 Mountings, 4.98 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 1 |
| 12***00 | Mounting | 1 |
K1-3-1 Crankshaft, Bearings, Pistons, Con-Rods, & Cylinder Liners
| 02***01 | Liner, Cylinder | 4 |
| 02***02 | Shim, 0.004in.(0.102mm) | 0 |
| 02***03 | Shim, 0.005in.(0.127mm) | 0 |
K1-5-1 Timing Gears
| 01***01 | Pulley, And Adapter | 1 |
| 02***01 | Block, Assembly, Cylinder | 1 |
| 02***02 | Belt, Drive | 1 |
K1-1-1 Engine Basic
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
| 01***00 | Engine, Complete, 4.98tt Turbocharged | 1 |
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
K2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***29 | Shaft, Rocker | 2 |
| 02***30 | Lever, Rocker | 8 |
| 02***31 | Spacer, 1/2in.(6.35mm) | 8 |
K2-4-1 Gasket Sets
| 81***04 | Gasket, Decarbonising | 1 |
| 81***05 | Kit-Gasket, Supplementary | 1 |
| 81***52 | Kit-Gasket, Decarbonising | 1 |
K2-3-1 Covers, Rocker & Tappet
| 02***42 | Cover | 1 |
| 02***44 | Pipe, Vent | 1 |
| 02***45 | Cover, Tappet | 1 |
K2-1-2 Cylinder Head
| 01***03 | Plate, Rear | 1 |
| 02***16 | Valve, Exhaust | 4 |
| 02***20 | Holder, Collet | 8 |
K2-1-0 Engine Build, Identification
K2-1-1 Cylinder Head
| 01***03 | Plate, Rear | 1 |
| 02***15 | Valve, Inlet | 4 |
| 02***16 | Valve, Exhaust | 4 |
K3-3-1 Manifold, Exhaust, & Silencer, Nat/Aspirated
| 02***50 | Manifold | 1 |
| 02***51 | Nut | 2 |
| 12***00 | Silencer | 1 |
K3-3-2 Manifold, Exhaust, & Silencer, Turbo
| 02***04 | Turbocharger | 1 |
| 02***05 | Manifold | 1 |
| 02***25 | Bolt | 4 |
K3-2-2 Filter, Air, Turbo
| 12***00 | Tube | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Tube | 1 |
K3-2-1 Filter, Air, Nat/Aspirated
| 12***05 | Bracket | 1 |
| 13***06 | Bolt | 2 |
| 13***04 | Bolt | 4 |
K3-1-1 Manifold, Induction, Nat/Aspirated
| 02***46 | Adapter | 1 |
| 02***47 | Manifold | 1 |
| 12***01 | Plate, Adaptor | 1 |
K3-1-0 Engine Build, Identification
K3-1-2 Manifold, Induction, Turbo
| 02***47 | Manifold | 1 |
| 02***02 | Pipe, Air Induction, Adapter | 1 |
| 02***03 | Hose, Air Induction | 1 |
K4-3-2 Radiator, Hoses & Fittings, Turbo
| 02***02 | Belt, Drive | 1 |
| 02***43 | Hose, By-Pass, L Shaped | 1 |
| 02***43 | Hose | 1 |
K4-4-1 Thermostat, Housing, Inlet & Outlet
| 02***55 | Connector, Outlet | 1 |
| 02***56 | Thermostat, 82 Degree C | 1 |
| 02***57 | Thermostat, 74 Degree C | 1 |
K4-2-2 Radiator, Fittings & Mountings, Turbo
| 11***03 | Bracket, Top | 1 |
| 11***04 | Guard, Right Hand | 1 |
| 11***05 | Guard, Left Hand | 1 |
K4-2-1 Radiator, Fittings & Mountings, Nat/Aspirated
| 11***03 | Bracket, Top | 1 |
| 11***04 | Guard, Right Hand | 1 |
| 11***05 | Guard, Left Hand | 1 |
K4-1-1 Pump, Water
| 02***52 | Pulley | 1 |
| 02***53 | Spacer, Distance Piece | 1 |
| 02***54 | Body | 1 |
K4-1-0 Engine Build, Identification
K4-4-2 Thermostat, Housing, Inlet & Outlet
| 02***56 | Thermostat, 82 Degree C | 1 |
| 02***57 | Thermostat, 74 Degree C | 1 |
| 02***58 | Housing, Thermostat | 1 |
K4-3-1 Radiator, Hoses & Fittings, Nat/Aspirated
| 02***02 | Belt, Drive | 1 |
| 02***43 | Hose, By-Pass, L Shaped | 1 |
| 12***02 | Tube | 1 |
K4-1-2 Pump, Water
| 02***52 | Pulley | 1 |
| 02***54 | Body | 1 |
| 02***45 | Pulley | 1 |
K5-1-1 Sump, Oil
| 02***59 | Sump | 1 |
| 02***60 | Dipstick | 1 |
| 02***61 | Tube, Guide | 1 |
K5-2-2 Pump, Oil
| 02***62 | Shim, .002in (0.51mm) | 0 |
| 02***63 | Shim, .003in.(.076mm) | 0 |
| 02***64 | Pipe, Suction | 1 |
K5-5-1 Cooler, Oil Filter, Turbocharger Pipework
| 02***42 | Element, Oil Filter | 1 |
| 02***06 | Pipe, Turbo Oil Feed | 1 |
| 02***07 | Hose, Turbo Oil Feed | 1 |
K5-3-1 Filter, Oil
| 02***01 | Bolt | 1 |
| 02***02 | Collar | 1 |
| 02***03 | Seal | 1 |
K5-4-1 Oil Feed Pipework
| 02***67 | Pipe, Overflow | 1 |
| 02***68 | Pipe | 1 |
| 02***04 | Pipe | 1 |
K5-1-0 Engine Build, Identification
K5-2-1 Pump, Oil
| 02***62 | Shim, .002in (0.51mm) | 0 |
| 02***63 | Shim, .003in.(.076mm) | 0 |
| 02***64 | Pipe, Suction | 1 |
K6-5-2 Filter, Fuel, Short
| 20***06 | Seal | 2 |
| 20***07 | Bolt, Centre | 1 |
| 20***08 | Washer | 1 |
K6-4-2 Pump, Fuel Lift
| 17***00 | Pump, Fuel Lift | 1 |
| 17***11 | Kit-Repair | 1 |
| 17***12 | Kit-Seal | 1 |
K6-6-1 Filter, Fuel Sediment
| 13***03 | Nut | 2 |
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
K6-3-1 Injectors, Fuel
| 13***09 | Bolt | 2 |
| 14***05 | Washer; Replaces 82***03 | 2 |
| 17***05 | Nut | 1 |
K6-5-1 Filter, Fuel, Long
| 13***16 | Bolt | 2 |
| 13***01 | Nut | 2 |
| 14***03 | Washer | 2 |
K6-2-1 Pump, Fuel Injection, Installation
| 02***77 | Bracket, Support | 1 |
| 02***78 | Plug | 1 |
| 02***79 | Hub | 1 |
K6-1-0 Engine Build, Identification
K6-4-1 Pump, Fuel Lift
| 12***00 | Rod, Pull | 1 |
| 13***03 | Screw, 1/4 Unf X .625 | 1 |
| 13***06 | Bolt | 1 |
K6-1-1 Fuel System
| 02***73 | Clamp | 2 |
| 02***74 | Pipe, Nylon | 1 |
| 02***75 | Clip | 1 |
L Engine, 4.236, From M298603
L1-7-2 Engine, Complete, Lh Build
| 01***00 | Engine, Imperial, Complete, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated; & 1, Lh50205. Fuel Filter & Pipework,Fan Belt,Outlet Connection & Inlet/Exhaust Manifolds., Engine, Imperial, 4.236 Compensated | 1 |
L1-8-3 Engine, Short, Imperial, Lh & Lj Builds
| 02***09 | Engine, Short, Imperial | 1 |
L1-2-3 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Lj Build
| 02***38 | Key | 1 |
| 02***27 | Bolt | 1 |
| 02***28 | Nut | 1 |
L1-3-2 Timing Case, Camshaft & Gears, Lj Build
| 02***02 | Casing, Timing | 1 |
| 02***05 | Gasket, Timing Case | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
L1-2-1 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Ld & Lh Builds
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***08 | Piston, Assembly, Oversize - .030inch | 4 |
| 02***09 | Kit-Piston Ring | 4 |
L1-3-1 Timing Case, Camshaft & Gears, Ld & Lh Builds
| 02***02 | Casing, Timing | 1 |
| 02***03 | Cover, Timing | 0 |
| 02***04 | Seal, Front Oil | 0 |
L1-1-1 Block Assembly, Imperial, Ld & Lh Builds
| 02***16 | Bolt, 89mm | 6 |
| 02***17 | Bolt, 105mm | 12 |
| 02***01 | Thimble | 10 |
L1-1-3 Block Assembly, Imperial, Lj Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***03 | Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip-Fit Type., Liner, Press Fit, Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip Fit Type., Liner, Press Fit; Flame Ring Type. This Requires Specialised Tools For Fitting, For General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing,For General Service Use Slip-Fit., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Refer To Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. This Requires Specialised Tools For Fitting, For General Service, Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type. | 4 |
L1-8-1 Short Engine
| 02***25 | Engine, Short, Imperial | 1 |
L1-7-3 Engine, Complete, Lj Build
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged | 1 |
| 01***0R | Engine, Imperial, 4.236 Turbocharged | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Superseded By N.S.P. Part No Longer Available Use 01/11***00 And Refer To T.I.K135/H, K129/E., Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 S/Seded By N.S.P. Part No Longer Available Use 02/11***00 And Refer To T.I.K135/H - K129/E., Engine, Imperial, Complete, 4.236 Turbocharged, Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Supersede By N.S.P. Part No Longer Available, Use 01/11***00 And Refer To T.I.K135/H K129/E. | 1 |
L1-7-1 Engine, Complete, Ld Build
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
| 01***0R | Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated; See Note 2. Fuel Filter & Pipework, Fan Belt, Thermostat,Outlet Connection & Inlet, Exhaust Manifolds. | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
L1-4-1 Flywheel & Housing, Ld,Lh & Lj Builds
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
L1-6-1 Engine Mountings, Ld,Lh & Lj Builds
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
L2-2-1 Rocker Cover, Ld Build
| 02***35 | Cover, Rocker | 1 |
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***80 | Pipe | 1 |
L2-1-1 Cylinder Head, Ld Build
| 02***14 | Head, Assembly, Cylinder | 1 |
| 02***15 | Nut | 2 |
| 02***18 | Spring, Valve, Inner | 8 |
L2-3-2 Rocker Assembly, Push Rods & Tappets, Ld, Lh & Lj Builds
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-4-1 Turbo, Heatshield, Lh & Lj Builds
| 02***15 | Guard, Heat | 1 |
| 02***00 | Guard, Heat | 1 |
| 02***80 | Shield, Heat | 1 |
L2-3-1 Rocker Assembly, Push Rods & Tappets, Ld Build
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-2-2 Rocker Cover, Lh & Lj Builds
| 02***37 | Cap, Oil Filler | 1 |
| 02***80 | Pipe | 1 |
| 02***22 | Seal | 1 |
L2-1-2 Cylinder Head, Lj Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***20 | Seat, Spring | 8 |
L2-1-3 Cylinder Head, Ld & Lh Builds
| 02***24 | Collet | 8 |
| 02***26 | O Ring; Exhaust. Used Only With Cylinder Heads 02/10***82 And 02/10***24., O Ring, O Ring; Inlet & Exhaust. No Longer Required | 4 |
| 02***48 | Plug | 1 |
L2-1-4 Cylinder Head, Lj Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***21 | Holder, Collet | 8 |
L3-4-1 Filter, Air, Ld Build
| 12***00 | Bracket, Air Filter Mounting | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pad, Mounting | 4 |
L3-5-6 Silencer & Extension, Lh & Lj Builds
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust | 1 |
L3-2-1 Manifold, Exhaust, Ld Build
| 02***49 | Manifold, Exhaust | 1 |
| 02***50 | Gasket | 2 |
| 02***51 | Nut | 4 |
L3-2-2 Manifold, Exhaust, Lh & Lj Builds
| 02***50 | Gasket | 1 |
| 02***51 | Nut | 4 |
| 02***17 | Manifold, Exhaust | 1 |
L3-4-8 Filter, Air, Ld Build
| 12***02 | Bracket | 1 |
| 13***04 | Bolt | 2 |
| 13***10 | Bolt | 1 |
L3-1-1 Manifold, Induction, Ld Build
| 02***45 | Manifold, Induction | 1 |
| 02***46 | Gasket | 1 |
| 02***47 | Gasket | 1 |
L3-5-1 Silencer & Extension, Ld Build
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust Extension | 2 |
L3-4-6 Filter, Air, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Hose, Assembly, Induction | 1 |
| 12***01 | Hose, Induction Elbow | 1 |
L3-1-2 Manifold, Induction, Lh & Lj Builds
| 02***16 | Manifold, Induction | 1 |
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
L4-1-1 Pump, Water, Ld Build
| 02***66 | Pump, Water | 1 |
| 02***67 | Gasket | 1 |
| 02***70 | Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7,9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump, Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1. & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit., Kit-Repair, Water Pump; Contains Items 3,4,5,6,7,8,9,10,11,12,13 & 27. Items 7,8,9 & 11, Repaired And Replaced By K It 02/10***87., Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 Are No Longer Required, Repaired And Replaced By Kit 02/10***87. | 1 |
L4-1-3 Pump, Water, Lh & Lj Builds
| 02***67 | Gasket | 1 |
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
L4-1-4 Pump, Water, Lh & Lj Builds
| 02***67 | Gasket | 1 |
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
L4-4-7 Radiator, Hoses & Fittings, Ld Build
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
L4-3-1 Thermostat, Housing, Inlet & Outlet, Ld Build
| 02***71 | Thermostat | 1 |
| 02***98 | Housing, Thermostat | 1 |
| 02***99 | Gasket | 1 |
L4-3-3 Thermostat, Housing, Inlet & Outlet, Lh & Lj Builds
| 02***95 | Plug, Taper | 2 |
| 02***99 | Gasket | 1 |
| 02***59 | Connector, Water Outlet | 1 |
L4-4-6 Radiator, Hoses & Fittings, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
L5-2-3 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 1 |
| 02***71 | Head, Filter | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
L5-2-1 Filter, Oil, Ld Build
| 02***63 | Gasket | 1 |
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***71 | Head, Filter | 1 |
L5-2-4 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 1 |
| 02***71 | Head, Filter | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
L5-1-1 Sump, Oil Pump, & Fittings, Ld,Lh & Lj Builds
| 02***59 | Sump, Oil | 1 |
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
L6-2-1 Bracket, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 02***90 | Bracket | 2 |
L6-1-2 Pump, Fuel Injection, Ld & Lh Builds
| 17***00 | Pump, Fuel Injection | 1 |
| 17***00 | Pump, Fuel Injection | 1 |
| 17***02 | Screw | 1 |
L6-6-1 Filter, Fuel Sediment, Ld,Lh & Lj Builds
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
L6-3-1 Controls, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
L6-4-2 Pump, Fuel Lift, Alternative
| 17***12 | Kit-Seal | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
| 17***19 | Kit-Repair, Fuel Lift Pump | 1 |
L6-1-1 Fuel Injection, Equipment, Ld & Lh Builds
| 02***53 | Washer | 4 |
| 02***54 | Pipe, No.1 Cylinder | 1 |
| 02***55 | Pipe, No.2 Cylinder | 1 |
L6-4-1 Pump, Fuel Lift, Ld,Lh & Lj Builds
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***98 | Screw | 1 |
L6-9-6 Fuel System, Lj Build
| 02***82 | Pipe, Assembly, Fuel, L/Pump To Filter | 1 |
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
L6-1-4 Pump, Fuel Injection, Lj Build
| 17***00 | Pump, Fuel Injection; 0r 3241f881 If Totally Stuck Use 3348f212 To, Modify And Recalibrate To Make 3241f790 | 1 |
| 17***02 | Screw | 1 |
| 17***03 | Nut | 3 |
L6-7-1 Filter, Fuel, Ld,Lh & Lj Builds
| 02***89 | Bracket | 1 |
| 02***94 | Banjo | 1 |
| 02***95 | Valve, Non-Return | 1 |
L6-1-3 Fuel Injection, Equipment, Lj Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 3 |
L6-9-1 Fuel System, Ld & Lh Builds
| 02***82 | Pipe, Assembly, Fuel, L/Pump To Filter | 1 |
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
L8-3-2 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***87 | Olive | 1 |
| 02***10 | Washer | 4 |
L8-2-2 Turbocharger, Lh & Lj Builds
| 02***56 | Turbocharger | 1 |
| 02***57 | Housing, Assembly, Centre | 1 |
| 02***58 | Nut, Lock | 1 |
L8-3-3 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
L9-2-2 Kit, Engine Overhaul, Lh Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***20 | Kit-Piston Ring | 4 |
| 02***35 | Seal, Front Oil | 1 |
L9-1-2 Gasket Sets, Turbo Engine
| 02***97 | Kit-Gasket, Top | 1 |
| 02***98 | Kit-Gasket, Bottom | 1 |
| 02***89 | Kit-Gasket, Top; Lh50133,Lh50205 & Lj50183. Refer To Service Workshop Manual, Kit-Gasket, Top | 1 |
L9-2-3 Kit, Engine Overhaul, Lj Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
L9-1-1 Gaskets Sets
| 02***66 | Kit-Gasket, Bottom | 1 |
| 02***87 | Kit-Gasket, Top | 1 |
| 02***88 | Kit-Gasket, Bottom | 1 |
L9-2-1 Kit, Engine Overhaul, Ld Build
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
Frequently asked questions
What engine does the JCB 3D 1700 use?
The JCB 3D 1700 is powered by a JCB Dieselmax engine delivering 74 HP and 400 Nm of torque.
What is the operating weight of the JCB 3D 1700?
The operating weight varies by configuration, ranging from 7,510 kg to 8,010 kg.
What model replaced the JCB 3D 1700?
The JCB 3DX Super is the successor model in the 3D series lineage, introduced in 2019.
What 3D 1700 owners discuss
What are the known powertrain and hydraulic behaviors for the JCB 3D series, specifically regarding transmission fluid and torque converter maintenance?
The JCB 3D series utilizes a Synchoro Shuttle transmission. Maintenance requires JCB Special Transmission Fluid (or equivalent Q8 fluid). A common issue involves the torque converter mesh filter becoming blocked by a white, milky substance, often indicating water contamination or seal degradation. The transmission fluid level must be checked with the engine running. Filling the transmission with the engine running can blow oil seals, a reported issue on Build 5 units with torque converters. The transmission oil filter service interval is every 50 hours or 30 days, with a major service at 800 hours or 120 days. Hydraulic oil capacity is 92 liters for the 3D Super, with a system capacity of 200 liters for older 3D models. JCB Hydraulic Oil the OEM part reference is specified for the hydraulic system. Have your dealer verify seal integrity before refilling if contamination is suspected.
What undercarriage or wear patterns are typical for the JCB 3D and similar backhoe loaders?
The JCB 3D is a backhoe loader, not a crawler excavator, so it does not have an undercarriage. Wear patterns typically involve the front and rear axle housings and hubs. The front axle requires 11 liters of oil, and the rear axle requires 20 liters. Grease points require regular lubrication. The machine operates with a standard operating weight of approximately 7,510 kg for the 3DX variant, with the older 3D series being lighter. Wear is common in the hydraulic cylinders and seals due to the high-pressure excavation work. The transmission fluid filter should be inspected for metal filings, which indicate internal wear.
What engine quirks are associated with the JCB 3D series, and which engine does it use?
The JCB 3D series typically uses a Leyland 3.77L 4-cylinder vertical engine. The 3DX variant uses a JCB 444 engine with a displacement of 4.4 liters, delivering 74 HP gross power and 400 Nm peak torque. Engine oil capacity is 18 liters for the 3D series and 21 liters for the 3DX. The engine oil filter service interval is every 100 hours or 30 days, with a major service at 1,000 hours or 120 days. Coolant capacity is 20.5 liters for the 3DX. The engine is equipped with an e-Waste Gate Turbocharger in newer variants to enhance power and fuel efficiency. Have your dealer verify the specific engine model and serial number against the machine's build date.
What are common electrical or sensor issues reported for JCB backhoe loaders?
Common electrical issues involve the forward/reverse shuttle system. The shuttle lever operates microswitches that activate hydraulic solenoids on the transmission body. A faulty forward microswitch or inhibitor switch can cause the machine to rev up but not move forward, while reverse works. The solenoids are located on the transmission body under the cab. Wiring issues, such as bridged wires on the inhibitor switch, can prevent starting or direction selection. The dump relay and fuse block (5 amp fuse for the forward solenoid circuit) should be checked. Random starting issues in newer JCB models can also be linked to joystick sensors or drive selector switches. Have your dealer verify the electrical diagram and solenoid operation for your specific serial range.
What should be checked when buying a used JCB 3D or 3DX backhoe loader?
When buying a used JCB 3D or 3DX, check the transmission fluid for a milky-white color, indicating water contamination in the torque converter. Inspect the torque converter mesh filter for blockage. Verify the operation of the forward and reverse microswitches and solenoids. Check the hydraulic system for leaks, particularly in the cylinders. Ensure the engine oil and coolant levels are correct. For the 3DX, verify the e-Waste Gate Turbocharger function. Check the front and rear axle oil levels. Inspect the undercarriage of the loader bucket and backhoe arm for wear. Verify the machine's serial number against the specific service manual for accurate fluid capacities and maintenance intervals.
What are the fluid capacities and specifications for the JCB 3D series?
Transmission fluid capacity is 21 liters for the 3D and 3DX series, using JCB Special Transmission Fluid. Hydraulic oil capacity is 92 liters for the 3DX Super and 200 liters for the system in older 3D models, using JCB Hydraulic Oil the OEM part reference. Engine oil capacity is 18 liters for the 3D and 21 liters for the 3DX. Coolant capacity is 20.5 liters for the 3DX. Front axle oil capacity is 11 liters, and rear axle oil capacity is 20 liters. Fuel tank capacity is 128 liters for the 3DX. DEF tank capacity is not specified for the 3D series in the sources. Have your dealer verify the exact fluid types and capacities for your machine's build year.
What maintenance intervals are specified for the JCB 3D series?
Grease points should be serviced every 10 hours. The transmission oil filter should be changed every 50 hours or 30 days. The engine oil filter should be changed every 100 hours or 30 days. The hydraulic oil filter should be changed every 1,700 hours or 270 days for the 3D series and 1,600 hours or 240 days for the 3DX Super. Major service intervals for the transmission are every 800 hours or 120 days. Engine oil change interval is every 1,000 hours or 120 days. Have your dealer verify the specific maintenance schedule for your machine's operating conditions.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 3D 1700 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.