JCBagriculturalbackhoe loader 3cx,4cx,214,215,217
Jcb 3CX-4 Australia
Maintenance schedule, common problems & OEM parts breakdown
The JCB 3CX-4 Australia is a mid-size backhoe loader designed for municipal, utility, and general construction work. It is powered by a JCB DieselMax 4-cylinder turbocharged engine producing 74.6 kW (100 hp) and 440 Nm of torque. Operating weight ranges from approximately 8,070 kg to 8,300 kg depending on configuration. The 3CX-4 is part of the 3CX family, which succeeded the 3CX Super and is succeeded by the 3CX Plus. Configurations include 2-wheel steering (2WS) and 4-wheel steering (4WS) variants, with loader bucket capacities up to 1.3 m³ and backhoe dig depths exceeding 5.8 meters.
The 3CX-4 generation marked a shift to Tier 4 Final emissions compliance using an in-cylinder solution rather than DEF or DPF aftertreatment. This architectural choice eliminated DEF consumption and forced regeneration events, reducing annual maintenance overhead compared to competitors like the Cat 420F2. The machine remains significant in the used and parts market due to its durable EcoMAX/DieselMax powertrain, which allows for extended 500-hour engine oil intervals. Its widespread use in Australian utility sectors ensures high availability of aftermarket components and a large base of serviceable units.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 3CX-4 Australia specifications
Engine
| Engine Model | JCB DieselMax (4-cylinder turbocharged diesel) |
| Gross Power | 82.7 hp (61.7 kW) |
| Net Power | 74.6 kW (100 hp) |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 7,370 kg (16,248 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 5.62 m (18.44 ft) |
| Transport Width | 2.35 m (7.71 ft) |
| Transport Height | 3.61 m (11.85 ft) |
| Wheelbase | 2.48 m (8.14 ft) |
| Ground Clearance | 0.38 m (1.25 ft) |
| Other Dimensions | Max Lift Capacity (Loader): 3,300 kg (7,275 lb); Load At Max Lift: 1,584 kg (3,492 lb); Bucket Width: 2.35 m (92.52 in) |
Performance
| Travel Speed (Forward) | 40 km/h (24.85 mph) |
| Travel Speed (Reverse) | 40 km/h (24.85 mph) |
| Dig Depth (Backhoe) | 5.87 m (19.26 ft) |
| Reach (Backhoe) | 6.245 m (20.49 ft) |
| Bucket Dig Force | 63,250 N (14,218 lbf) |
| Bucket Breakout Force | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 160 L (42.3 gal) |
| Hydraulic System | 118 L (31.2 gal) |
| Engine Oil | 11 L (2.9 gal) |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 3CX-4 Australia maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 3CX-4 Australia beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid analysis at the 500-hour interval is critical for the 3CX-4 Australia. Sample engine oil, hydraulic oil, and axle oils to detect early bearing wear or contamination. Monitor hydraulic return filter magnets for metallic debris during every 500-hour service. Use JCB High Performance Hydraulic Oil ISO VG46 for temperatures above 38°C and ISO VG32 below 38°C. Track coolant silicate levels to prevent sludge formation in the expansion bottle. Extend intervals only if lab results confirm clean fluid condition within JCB specifications.
Corrective & Common Repairs
Common failures on the 3CX-4 Australia include hydraulic hose chafing on the boom and stick due to high-cycle use. Inspect hoses daily for pinhole seepage and replace before failure. Wet-disc service brakes on the rear axle wear faster under heavy roading; inspect disc thickness at 1,000-hour intervals. The DieselMax engine requires strict fuel quality discipline; contaminated fuel damages common-rail injectors faster than aftertreatment-equipped engines. Replace fuel filters at 500 hours to protect injector integrity. Check kingpost pivot pins for slop, which accelerates wear on the swing mechanism.
Overhaul & Rebuild Points
The 2,000-hour interval is the primary overhaul checkpoint for the 3CX-4 Australia. Inspect the hydraulic pump swash plate and piston block for wear during the hydraulic oil change. Check the torque converter transmission for slippage or overheating signs, indicating internal clutch wear. Inspect the DieselMax engine valve clearances and adjust if necessary to maintain compression. Examine the front and rear axle hubs for seal leaks and bearing play. Structural integrity checks of the loader arm and backhoe boom welds are essential to prevent catastrophic failure under load.
Seasonal & Environment Servicing
In Australian summer conditions above 38°C, switch to JCB High Performance Hydraulic Oil ISO VG46 to maintain viscosity. In winter or cold starts, use ISO VG32 or JCB Engine Oil Special 15W-40 to ensure proper flow. Drain the fuel water separator daily to prevent water-induced injector corrosion. In dusty environments, clean the air filter pre-cleaner frequently and monitor the restriction indicator. Check the cooling system for debris buildup in the radiator and oil cooler fins to prevent overheating during high-load excavation tasks.
3CX-4 Australia common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 32/400101 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 01/111100R | Engine, Imperial, 4.236 Compensated | Fuel system service | Check fitment → |
| 01/107400R | Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated | Fuel system service | Check fitment → |
| 02/100182 | Pipe, Assembly, Fuel, L/Pump To Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3CX-4 Australia fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0400-00 | Exhaust Gas Recirculation (EGR) flow fault. No EGR flow detected when operation is required. | Blocked EGR passage, restricted tube, or faulty EGR valve. | Inspect EGR tube for blockage; clean or replace valve if restricted. |
| P02A6-00 | Fuel trim for cylinder #4 at maximum limit. | Fuel delivery issue or injector fault on cylinder 4. | Clear code and reset computer; inspect fuel system and injector for cylinder 4. |
| P0087 | Fuel rail/system pressure too low. | Fuel filter blockage or lift pump failure. | Check and replace fuel filters; verify lift pump operation. |
| P0117 | Engine coolant temperature sensor circuit low voltage. | Faulty coolant temperature sensor or wiring issue. | Inspect sensor wiring harness for damage; test sensor resistance. |
| P0521 | Engine oil pressure sensor range/performance issue. | Faulty oil pressure sensor or low oil level. | Check engine oil level; test sensor circuit with multimeter. |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault). | Open circuit in the reductant injector wiring or injector failure. | Inspect injector connector for corrosion; verify circuit continuity. |
| U0100 | Lost communication with Engine Control Module (ECM). | CAN bus communication failure or poor ground connection. | Check battery voltage and ground straps; inspect CAN bus wiring. |
| 101 | Low transmission clutch pressure detected. | Hydraulic pressure loss in transmission circuit. | Check transmission fluid level; inspect hydraulic lines for leaks. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3CX-4 Australia attachments & work tools
Loader Buckets
Large capacity buckets up to 0.48 m³ (0.63 yd³) are supported for excavation rates of up to 190 tonnes per hour. The standard 6-in-1 shovel is available in 1.0 m³ (1.3 yd³), 1.2 m³ (1.6 yd³), or 1.3 m³ (1.7 yd³) configurations depending on the specific model variant.
Backhoe Buckets
Standard digging depth exceeds 6 m (19.7 ft) with an extending dipper providing reach up to 7.1 m (23.3 ft). Backhoe bucket capacities range from 0.2 m³ (0.26 yd³) to 0.3 m³ (0.39 yd³) for trenching and pipe laying tasks.
Quick Hitch Systems
An auto-lock quick hitch with proximity sensor and two-stage unlock process is available as an optional factory fit. Integrated quickhitch forks offer a 2000 kg (4409 lb) lifting capacity with a wide 1360 mm (53.5 in) carriage for stability.
Hydraulic Tool Circuits
A hand-held hydraulic tool circuit is available for breakers and power tools. The 3CX Compact variant provides 120 lpm auxiliary flow to support attachments such as trenchers, water pumps, and disc breakers.
Grading and Laser Systems
A built-in laser grading mount allows for simple integration of a 2D laser system. The Return-to-Grade feature positions the shovel at the optimum angle for levelling tasks.
Forks and Skid Steer Compatibility
The machine is compatible with a wide range of skid steer loader attachments via bi-directional pipework. Easy Forks are wider and designed for easier folding and deployment.
Steering and Maneuverability Options
Steering modes include all-wheel steer (AWS), crab steer, and two-wheel steer (2WS). The 3CX Compact features auto-switchable 2WS/4WS and a tight 5.8 m (19 ft) turning circle for single carriageway work.
Visibility and Camera Systems
Forward-facing wide-angle cameras with 7-inch colour displays are standard on the 3CX PRO. Roof-mounted and quickhitch cameras are available as optional upgrades to enhance visibility of forks and loads.
Transmission and Roading Options
The 3CX PLUS features a 4-speed Powershift with TorqueLock. The 3CX PRO offers a 6-speed Autoshift transmission with overdrive for travel speeds up to 50 kph (31 mph).
Operator Comfort and Controls
The 3CX PLUS and PRO include a fully adjustable heated cloth air suspension seat with lumbar support and 180-degree operation. Servo excavator controls and single-lever operation are standard for ease of use.
All 3CX-4 Australia assemblies by section
Every catalogued assembly group for the Jcb 3CX-4 Australia. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-3-3 Fork Lift, 6 In 1 Clam Shovel, Mounted (42")
| 12***00 | Fork, Shovel Mounted | 1 |
| 12***00 | Fork | 2 |
| 12***00 | Bracket | 2 |
A1-2-3 Shovel, Clam, 6 In 1, 1.1 Cu.Yd.
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-2-2 Shovel, Clam, 6 In 1, 1.2 Cu.Yd.
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-3-4 Fork Lift, Shovel Mounted, (42")
| 12***02 | Plate | 2 |
| 12***03 | Plate | 1 |
| 13***24 | Bolt | 2 |
A1-3-1 Fork Lift, Shovel Mounted
| 12***00 | Kit-Fork Lift, Shovel, Std | 1 |
| 12***00 | Fork | 4 |
| 12***01 | Gusset, Standard Shovel | 2 |
A1-3-2 Fork Lift, Shovel Mounted
| 12***00 | Fork, Lift, -3c/3cx/3d | 1 |
| 12***01 | Gusset | 4 |
| 12***00 | Fork | 2 |
A1-1-3 Bucket, Side Tip L/H
| 98***66 | Bucket, Lh Side Tip | 1 |
| 98***99 | Plate | 1 |
| 98***00 | Frame | 1 |
A1-4-1 Crane Hook
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***39 | Attachment, Crane Hook Assembly, Fork Mounted | 1 |
A1-1-1 Shovel
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***18 | Spacer | 4 |
A1-2-1 Shovel, Clam, 6 In 1, 1.0 Cu.Yd
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-1-2 Bucket, Side Tip R/H
| 98***66 | Bucket, Lh Side Tip | 1 |
| 98***99 | Plate | 1 |
| 98***00 | Frame | 1 |
A2-1-2 Bucket
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt | 6 |
A2-1-1 Bucket
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt | 6 |
A2-5-1 Attachments, Jaw Bucket
| 10***48 | Pin, Pivot | 1 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 6 |
A2-4-1 Bucket, Jaw, 460mm Wide, Jaw, 600mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-3-1 Blade, Ditch Cleaning
| 13***12 | Bolt | 3 |
| 13***2Z | Bolt | 3 |
| 13***1Z | Nut | 0 |
A2-4-2 Bucket, Jaw, 305mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-2-1 Attachments, Backhoe, Ripper Tooth,B.Blade, Bucket,Clay,Square Hole,T.Ditching
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A3-5-1 Powerbreaker
| 12***00 | Breaker, Power | 1 |
| 12***01 | Plate | 1 |
| 12***00 | Plate, Pivot | 1 |
A3-5-4 Breaker, Brh 250
| 12***87 | Bracket, Carrier | 1 |
| 16***18 | Adapter | 1 |
| 81***44 | Adapter | 1 |
A3-5-2 Breaker, Brh 125, With Side Plates, Standard
| 10***51 | Spacer | 2 |
| 12***00 | Kit-Installation, Brh125 Breaker | 1 |
| 12***00 | Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., For Use On Normal Backhoe. Part Is Mss Use The Following Parts Marked B , Ie 1 Left Hand, 1 Right Hand Plate. | 1 |
A3-1-2 Roadbreaker, Installation, 4wd
| 10***06 | Lock; Supply 12***71 | 1 |
| 11***09 | Washer | 3 |
| 12***00 | Pipe | 1 |
A3-2-1 Roadbreaker, Hose Reel
| 12***01 | Plate, Side | 2 |
| 12***02 | Plate | 1 |
| 12***03 | Block | 1 |
A3-3-1 Roadbreaker, Stanley
| 12***00 | Breaker, Road | 1 |
| 12***01 | Handle | 1 |
| 12***02 | Grab | 1 |
A3-1-1 Roadbreaker, Installation, 2wd
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Carrier | 1 |
| 12***00 | Carrier | 1 |
A3-4-1 Roadbreaker, Steels, Stanley
| 99***14 | Pad, Rammer | 1 |
| 99***15 | Tool, Moil, Tool, Moil; 380mm Long Below Collar. 160mm (6 1/4") Long Above Collar | 1 |
| 99***16 | Tool, Chisel, Narrow | 1 |
A3-6-1 Powerbreaker Steels, Krupp
| 99***06 | Shaft | 1 |
| 99***07 | Pad, Pile Driving | 1 |
| 99***08 | Sleeve, Pile Driving | 1 |
A3-5-3 Breaker, Brh 125
| 90***00 | Breaker, Hydraulic | 1 |
| 90***01 | Screw | 10 |
| 90***02 | Accumulator, Assembly | 1 |
A4-1-1 Tooth Guard
| 10***00 | Guard, Tooth | 1 |
| 11***00 | Cable, Control, With Plug | 1 |
| 12***00 | Guard, Tooth | 1 |
A4-2-1 Highway Parts, Italian
| 12***00 | Strut, Jury | 1 |
| 12***00 | Strap | 1 |
| 12***01 | Washer | 2 |
A4-3-1 Front Mudguard, Swedish
| 12***01 | Guard, Mud | 2 |
| 12***02 | Strap | 4 |
| 12***00 | Platform, Lh | 1 |
B Bodywork, Cab, Loader End
B1-4-1 Stabiliser, Sideshift
| 10***10 | Pin, Pivot | 1 |
| 10***37 | Pin, Pivot | 2 |
| 10***02 | Foot; Replaced By 12***66, See San04389 | 4 |
B1-1-6 Mainframe, 8'0" Sideshift, German, Swedish
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B1-3-1 Tank, Diesel Fuel, Fittings
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Cap, Filler | 1 |
| 12***00 | Tube, Filler | 1 |
B1-1-5 Mainframe, 7'4" Sideshift, German, Swedish
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B1-1-3 Mainframe, Centremount
| 11***09 | Washer | 8 |
| 12***00 | Grille | 1 |
| 12***02 | Guard, Mesh | 1 |
B1-1-4 Mainframe, Loader
| 11***09 | Washer | 4 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***00 | Grille | 1 |
B1-1-1 Mainframe, 7'4" Sideshift
| 10***06 | Spacer | 1 |
| 10***19 | Boss | 1 |
| 11***09 | Washer | 8 |
B1-1-7 Mainframe, Centremount
| 12***00 | Grille | 1 |
| 12***02 | Guard, Mesh | 1 |
| 12***04 | Spacer | 4 |
B1-4-3 Stabiliser, Centremount
| 10***30 | Pin, Pivot | 2 |
| 10***04 | Collar | 2 |
| 12***01 | Foot, Rubber | 2 |
B1-1-2 Mainframe, 8'0" Sideshift
| 11***09 | Washer | 8 |
| 12***00 | Leg, Outer, Right Hand | 1 |
| 12***00 | Grille | 1 |
B1-4-2 Stabiliser, Centremount
| 10***04 | Collar | 2 |
| 12***00 | Leg, Stabiliser | 2 |
| 12***00 | Leg, Stabiliser, Lh | 1 |
B1-2-1 Tank, Hydraulic, Fitting
| 12***03 | Indicator | 1 |
| 12***05 | Indicator | 1 |
| 12***00 | Cover | 1 |
B1-5-1 Bonnet
| 12***00 | Hinge, Assemble | 2 |
| 12***00 | Stay | 1 |
| 12***00 | Stay, Assembly | 1 |
B2-9-1 Window, Rear, Swedish
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 12***02 | Handle, Left Hand | 1 |
| 12***00 | Handle | 1 |
B2-6-2 Soundproofing, Engine - Swedish
| 12***01 | Mat | 2 |
| 12***02 | Mat | 2 |
| 12***01 | Lug | 2 |
B2-5-1 Basic Seat
| 12***00 | Housing | 1 |
| 12***00 | Riser, Seat, Assembly | 1 |
| 12***03 | Cushion | 1 |
B2-6-1 Soundproofing, Engine
| 12***00 | Panel, Engine, Lh | 1 |
| 12***00 | Panel, Engine, Rh | 1 |
| 12***01 | Mat | 2 |
B2-3-1 Cab Shell, Unglazed
| 12***00 | Roof, Swedish | 1 |
| 12***00 | Door, Lh | 1 |
| 12***00 | Door, Rh | 1 |
B2-5-4 Seat - Optional, Swedish/German,U.K., & World
| 12***00 | Seat, Complete, Low Back | 1 |
| 12***00 | Seat | 1 |
| 40***00 | Seat, Suspension, Fabric | 2 |
B2-5-2 9802/8000 B2-5-2
| 11***01 | Stop | 1 |
| 11***00 | Lever | 1 |
| 12***01 | Adapter | 1 |
B2-5-6 Seat Riser, Standard, German, Swedish, Optional, Uk & World
| 40***01 | Damper | 1 |
| 40***10 | Bracket | 1 |
| 40***11 | Lever | 1 |
B2-1-1 Soundproofing, Cab Base
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
| 12***02 | Mat | 1 |
B2-5-5 Seat With Riser, Standard, German, Swedish, Optional, Uk & World
| 12***00 | Seat, Complete, Low Back | 1 |
| 12***14 | Spacer | 2 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
B2-2-1 Cab Glazing
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Cab, Assembly, With Glass | 1 |
| 12***00 | Cab, Assembly, With Glass | 1 |
B2-3-3 Cab
| 12***01 | Bracket, Interior Light | 1 |
| 12***02 | Cap | 4 |
| 12***05 | Bolt, Closing | 1 |
B2-5-3 Basic Seat
| 12***10 | Cushion, Brown, Vinyl | 1 |
| 12***11 | Cushion, Brown, Vinyl | 1 |
| 12***00 | Lever | 1 |
B2-2-2 Cab Glass
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 1 |
| 12***01 | Bracket | 1 |
B2-3-4 Cab -, Swedish
| 12***01 | Bracket, Interior Light | 1 |
| 12***02 | Cap | 4 |
| 12***05 | Bolt, Closing | 2 |
B2-4-1 Wash/Wipe, Windscreen
| 12***00 | Pump, And Reservoir | 1 |
| 12***01 | Jet | 1 |
| 12***00 | Pump, And Reservoir | 1 |
B2-3-2 Canopy
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 2 |
| 12***01 | Bracket | 1 |
B2-2-3 Cab Glazing, Swedish
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror | 2 |
| 12***01 | Bracket | 2 |
B3-1-1 Arms, Loader, Basic
| 10***15 | Pin, Pivot, 165mm Long | 4 |
| 10***21 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 6 |
B3-2-1 Arms, Loader, Parallel Lift
| 10***15 | Pin, Pivot, 165mm Long | 2 |
| 10***21 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 8 |
B4-5-2 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-3-2 Kingpost
| 10***16 | Pin, Pivot | 1 |
| 11***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-4-2 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-3-1 Kingpost
| 10***16 | Pin, Pivot | 1 |
| 10***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-5-1 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-2-2 Slew/Swing, Components
| 12***06 | Bearing | 1 |
| 12***14 | Rack | 1 |
| 12***00 | Plate | 1 |
B4-6-1 Dipper (Stick), Extending
| 10***25 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-4-1 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-6-2 Dipper (Stick), Extending
| 10***32 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-4-4 Boom
| 10***23 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 12***00 | Boom, 2200 M.M. Long | 1 |
B4-1-2 Kingpost Carriage, Centremount
| 12***05 | Pin, Lock | 1 |
| 12***13 | Shaft | 1 |
| 12***20 | Carriage | 1 |
B4-1-1 Kingpost Carriage, Sideshift
| 12***05 | Pin, Lock | 1 |
| 12***07 | Plate | 1 |
| 12***13 | Shaft | 1 |
B4-4-3 Boom
| 10***16 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 10***01 | Adapter | 1 |
B4-2-1 Slew/Swing, Components
| 12***03 | Pin | 1 |
| 12***06 | Bearing | 1 |
| 12***12 | Gear, Pinion | 1 |
B4-5-3 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***43 | Pin, Pivot | 1 |
B4-1-3 Kingpost Carriage, Centremount
| 12***05 | Pin, Lock | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Carriage | 1 |
B5-3-1 Tool Kit, Supplementary
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
| 82***05 | Spanner, 11/16" X 3/4" A/F, D.O.E. | 1 |
B5-2-1 Tool Kit, Standard
| 27***00 | Bag, Tool | 1 |
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
B5-4-1 Fire Extinguisher
| 13***02 | Nut | 2 |
| 14***05 | Screw, Self Tapping | 2 |
| 25***00 | Extinguisher, Fire | 1 |
B5-1-1 Paint And Transfers
| 12***02 | Decal, Jcb, Side Door | 2 |
| 42***04 | Paint, Black Gloss Enamel, 1 Lts | 0 |
| 42***04 | Paint, Gloss Yellow, 1 Lts | 0 |
C Electrics-Machine, Cab & Engine
C1-2-1 Side & Rear Lights
| 10***01 | Spring, 24" Bungy | 1 |
| 70***00 | Light, Rear Fog | 1 |
| 70***00 | Light, Side Front, Supplied Without Bulbs | 2 |
C1-3-1 Light, Head, Working
| 12***00 | Bracket | 2 |
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, 5/16" Unf | 2 |
C1-3-2 Light, Head, Working
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***03 | Spring | 1 |
| 70***00 | Light, Working, 12 Volt | 2 |
C1-2-2 Side & Rear Lights
| 10***01 | Spring, 24" Bungy | 1 |
| 12***00 | Bracket, Rh | 1 |
| 12***00 | Bracket, Lh | 1 |
C1-1-1 Electrical Equipment, Cab
| 12***01 | Cover, Front | 1 |
| 12***02 | Cover, Rear | 1 |
| 12***01 | Bracket | 2 |
C1-5-1 Pump, Diesel, Refuelling
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-4-1 Light, Side, Shovel Mounted, German & Swiss
| 12***00 | Bracket | 1 |
| 12***01 | Bracket, Swiss | 2 |
| 12***02 | Bracket, Reflector Mounting, German | 2 |
C1-4-2 Light, Side, Shovel Mounted, German & Swiss
| 12***01 | Bracket, Swiss | 1 |
| 12***02 | Bracket, Reflector Mounting, German | 1 |
| 12***00 | Bracket | 1 |
C2-4-2 Alternator
| 71***06 | Kit-Bearing, Drive End | 1 |
| 71***00 | Alternator; Lucas Ref 24037. Type Of Alternator Best Identified By Lucas Ref.Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref. Stamped On Tag At Pulley End., Alternator; Lucas Ref. 24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator | 1 |
| 71***01 | Cover | 1 |
C2-5-2 Motor, Starter, Service Option
| 71***00 | Motor, Starter | 1 |
| 71***01 | Bearing | 1 |
| 71***02 | Bracket, End | 1 |
C2-8-1 Installation, Reverse Alarm, Optional
| 13***02 | Nut, Lock | 1 |
| 14***14 | Washer, Star | 1 |
| 70***00 | Switch | 1 |
C2-5-3 Starter Motor, Type M127 - 12.Volt, Blmc 4.98 Engines, (Alternative)
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***6Z | Bolt | 3 |
C2-1-2 Electrics, Engine, Swedish
| 02***23 | Switch, Oil Pressure | 1 |
| 04***76 | Switch, Isolating | 1 |
| 04***99 | Switch, Neutral Start | 1 |
C2-3-2 Alternator Mountings, 4.236 Engine
| 02***73 | Bracket, Alternator Mounting | 1 |
| 02***74 | Bracket, Alternator Support | 1 |
| 02***75 | Lever, Alternator Adjusting | 1 |
C2-1-1 Electrics, Engine
| 02***23 | Switch, Oil Pressure | 1 |
| 04***76 | Switch, Isolating | 1 |
| 04***99 | Switch, Neutral Start | 1 |
C2-7-1 Warning System -, Powerbreaker
| 14***19 | Seal, Dowty | 1 |
| 24***12 | Grommet | 1 |
| 70***00 | Light, Warning | 1 |
C2-6-1 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-4-3 Alternator, A127-45amp 12.Volt, Blmc 4.98 Engines
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-2-1 Battery 12v, Carrier, Standard
| 10***00 | Clamp | 1 |
| 12***01 | Tray | 1 |
| 12***02 | Tray | 1 |
C2-6-3 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-6-2 Heater, Installation, Swedish
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-3-4 Alternator Mountings
| 02***76 | Spacer | 1 |
| 02***01 | Lever, Alternator Adjusting | 1 |
| 02***02 | Bracket, Alternator Mounting | 1 |
C2-3-3 Alternator Mountings
| 02***76 | Spacer | 1 |
| 02***92 | Washer | 3 |
| 02***43 | Bracket, Alternator Mounting | 1 |
C2-5-1 Motor, Starter
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 70***01 | Bracket, Commutator End | 1 |
C2-5-4 Motor, Starter, M127 12.Volt, 4.236 Engines
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Nut | 3 |
C2-5-5 Motor, Starter, M127 12.Volt, 4.236 Engines
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-4-4 Alternator, A127-45amp 12.Volt, 4.236 Engines
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
C2-4-1 Alternator
| 02***28 | Pulley | 1 |
| 71***01 | Regulator | 1 |
| 71***02 | Rotor, Assembly | 1 |
C2-3-1 Alternator Mountings, 4.98nt Engine
| 02***88 | Bracket, Support | 1 |
| 02***89 | Tube, Spacer | 1 |
| 02***90 | Link, Adjusting | 1 |
C2-6-4 Heater, Installation, Swedish
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C3-2-1 Instrument Panel
| 12***03 | Cover | 1 |
| 12***04 | Bracket | 1 |
| 12***06 | Cover | 1 |
C3-2-2 Instrument Panel
| 12***05 | Cover | 1 |
| 12***06 | Cover | 1 |
| 12***00 | Cable, Control | 1 |
C3-1-1 Switch, Column
| 11***01 | Key, German | 2 |
| 12***09 | Cover | 1 |
| 12***12 | Cover | 1 |
D Controls-Machine, Engine
D1-5-1 Lever Lock, Excavator Valve, Italian Build
| 12***00 | Kit-Lever Lock | 1 |
| 12***01 | Plate, Lock | 1 |
| 12***02 | Pin, Pivot | 1 |
D1-1-1 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***05 | Joint, Universal | 2 |
| 10***06 | Joint, Ball | 1 |
D1-2-1 Controls, Excavator, Standard
| 10***01 | Knob, Large Dia. | 2 |
| 10***05 | Joint, Universal | 1 |
| 10***06 | Joint, Ball | 1 |
D1-2-2 Controls, Excavator, Swedish
| 10***01 | Knob, Large Dia. | 2 |
| 10***05 | Joint, Universal | 1 |
| 10***06 | Joint, Ball | 1 |
D1-3-1 Foot Pedal Controls, - Aux. Valve
| 12***00 | Lever | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Bracket | 1 |
D1-1-4 Controls, Loader Valve, With Lever Lock
| 10***01 | Knob, Large Dia. | 1 |
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
D1-2-4 Controls, Excavator, Swedish
| 10***01 | Knob, Large Dia. | 2 |
| 10***06 | Joint, Ball | 2 |
| 12***02 | Band, Retaining | 1 |
D1-2-3 Controls, Excavator, Standard
| 10***01 | Knob, Large Dia. | 2 |
| 10***06 | Joint, Ball | 2 |
| 12***02 | Band, Retaining | 1 |
D1-4-1 Installation, Shovel Reset
| 12***00 | Bracket | 1 |
| 12***01 | Bar | 1 |
| 12***02 | Bracket, Saddle | 2 |
D1-3-2 Foot Pedal Controls, - Aux. Valve
| 12***00 | Lever | 1 |
| 12***00 | Bracket | 1 |
| 12***01 | Bar, Locking | 1 |
D1-1-3 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
D1-1-2 Controls, Loader Valve, With Lever Lock
| 10***01 | Knob, Large Dia. | 1 |
| 10***05 | Joint, Universal | 2 |
| 10***06 | Joint, Ball | 1 |
D1-3-3 Foot Pedal Controls, - Aux. Valve
| 12***01 | Bar, Locking | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Bracket | 1 |
D2-1-1 Control Pedal, Brake
| 10***01 | Knob, Large Dia. | 1 |
| 12***04 | Pin, Pivot | 1 |
| 12***06 | Plate, Lock | 1 |
D2-2-1 Control, Parking Brake
| 12***05 | Bracket | 1 |
| 12***01 | Plate | 1 |
| 12***02 | Plate | 1 |
D3-2-1 Controls, Forward & Reverse, Transmission Dump
| 12***05 | Pin, Pivot | 1 |
| 12***00 | Pedal | 1 |
| 12***1P | Bracket | 1 |
D3-1-3 Throttle Controls, 4.236 Engine
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
D3-1-2 Throttle Controls, Blmc 4.98 Engines, Swedish Builds
| 02***82 | Spring | 1 |
| 10***01 | Connector | 1 |
| 10***00 | Bracket | 1 |
D3-1-4 Throttle Controls, 4.236 Engine, Swedish Builds
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 10***01 | Connector | 1 |
D3-1-1 Throttle Controls, Blmc 4.98 Engine
| 02***82 | Spring | 1 |
| 10***00 | Bracket | 1 |
| 10***01 | Bracket | 1 |
D3-2-2 Controls, Forward & Reverse, Transmission Dump, 2/4wd Selector
| 12***00 | Pedal | 1 |
| 12***01 | Bracket | 1 |
| 12***02 | Bracket | 1 |
E Hydraulics
E1-6-8 Hose And Pipework, Aux. Circuit, Powerbreaker
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-5-4 Circuit, Backhoe, Standard Dipper, Centremount/7
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 3 |
| 61***00 | Hose | 2 |
E1-6-2 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-8-4 Circuit, Backhoe, Extradig Dipper, Centremount 1550/1900
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 13***04 | Bolt | 2 |
E1-4-1 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-2-1 Circuit, Loader Arm, Basic
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 13***14 | Bolt, Long | 4 |
E1-5-1 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 2 |
| 61***00 | Hose | 2 |
E1-3-2 Circuit, Auxiliary, Loader Arm, Self Level
| 12***02 | Plate | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-6-1 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe, Assembly | 1 |
| 12***00 | Pipe | 1 |
E1-1-4 Circuit, Roadbreaker
| 12***02 | Plate | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
E1-3-5 Circuit, Pole Planter, Installation
| 12***01 | Manifold | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Connector | 1 |
E1-6-9 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift/7
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-6-5 Auxiliary Circuit, Powerbreaker
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-3-3 Circuit, Auxiliary, Loader Arm, Basic
| 13***12 | Bolt | 1 |
| 14***03 | Washer | 1 |
| 14***06 | Washer | 1 |
E1-4-8 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-5-5 Circuit, Backhoe, Standard Dipper, Centremount/7
| 12***00 | Pipe | 1 |
| 13***04 | Bolt | 2 |
| 13***03 | Nut | 1 |
E1-4-2 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-5-3 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Hose | 1 |
| 13***03 | Nut | 2 |
E1-6-7 Auxiliary Circuit, Hose And Pipework, Powerbreaker (Krupp)
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-1-5 Neutral Circuit, Auxiliary Valve, Powerbreaker
| 13***05 | Bolt | 3 |
| 14***19 | Seal, Dowty | 1 |
| 14***26 | Washer, Seal | 2 |
E1-6-4 Circuit, Auxiliary, Backhoe, Standard Dipper, Centermount
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-3-1 Circuit, Auxiliary, Loader Arm, Basic
| 12***02 | Plate | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-5 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-8-3 Circuit, Backhoe, Extradig Dipper, Centremount 1400/1600
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Pipe, Rh | 2 |
E1-8-2 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-8-1 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-8-5 Hose & Pipework, Extended Dipper, Centremount Circuit
| 12***00 | Pipe, R.H | 1 |
| 12***00 | Pipe, L.H. | 1 |
| 12***00 | Pipe | 1 |
E1-9-1 Circuit, Auxiliary, Breaker Brh125, Standard Dipper
| 12***02 | Guide | 2 |
| 12***01 | Plate | 1 |
| 12***02 | Guide | 1 |
E1-4-4 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-2-3 Circuit, Loader Arm, Basic
| 12***00 | Pipe, Assembly | 1 |
| 13***8Z | Bolt | 2 |
| 13***8Z | Bolt | 4 |
E1-2-2 Circuit, Loader Arm, Self Level
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 13***08 | Bolt | 6 |
E1-4-3 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Cluster, Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Base | 1 |
E1-9-2 Circuit, Auxiliary, Breaker Brh125, Standard Dipper
| 12***02 | Guide | 2 |
| 12***01 | Plate | 1 |
| 12***02 | Guide | 1 |
E1-7-2 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***01 | Housing | 4 |
| 12***00 | Bracket, Support | 1 |
E1-6-3 Circuit, Auxiliary, Backhoe, Standard Dipper, Centermount
| 12***07 | Guide | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-7-1 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***05 | Seal | 1 |
| 12***01 | Housing | 4 |
E1-5-2 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 1 |
| 61***00 | Hose, 1/4"Bsp X 1200mm | 2 |
E1-1-1 Circuit, Neutral, Single Pump
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-4-7 Circuit, Excavator, Valve To Kingpost, Jcb Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-6 Circuit, Excavator, Valve To Kingpost, Iso Controls
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-9-3 Circuit, Auxiliary, Hydraulic Breaker
| 14***11 | Seal, Bonded | 1 |
| 14***14 | Washer, Seal | 1 |
| 14***17 | Seal | 7 |
E1-3-4 Circuit, Auxiliary, Loader Arm, Self Level
| 13***08 | Bolt | 2 |
| 13***12 | Bolt | 1 |
| 14***03 | Washer | 3 |
E1-2-4 Hose And Pipework, Loader Arm, Self Level
| 12***00 | Pipe, Assembly | 1 |
| 13***08 | Bolt | 2 |
| 13***03 | Nut | 2 |
E1-6-6 Auxiliary Circuit, Powerbreaker
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Plate | 1 |
E1-1-2 Circuit, Neutral, Twin Pump
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E1-1-3 Neutral Circuit, Loading Shovel
| 12***00 | Pipe | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
E2-1-1 Pump, Main Hydraulic, Single, Standard
| 13***10 | Bolt | 4 |
| 13***03 | Nut | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
E2-3-1 Shaft, Pump Drive
| 11***02 | Adapter, Drive | 1 |
| 12***02 | Adapter, Drive | 1 |
| 13***06 | Bolt | 4 |
E2-2-1 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***10 | Bolt | 4 |
| 13***14 | Bolt | 2 |
| 13***03 | Nut | 2 |
E3-6-3 Valve, Section, Excavator Valve, Seventh Spool
| 24***15 | O Ring | 1 |
| 24***11 | O Ring | 1 |
| 91***00 | Valve, Section, Assembly | 1 |
E3-7-1 Filter, Hydraulic
| 13***01 | Plug, Drain | 1 |
| 13***01 | Nut | 2 |
| 14***11 | Seal, Bonded | 1 |
E3-1-1 Valve, Loader
| 12***01 | Mounting, Rubber | 3 |
| 13***30 | Bolt | 1 |
| 13***03 | Nut | 6 |
E3-7-2 Filter -, Powerbreaker
| 32***00 | Filter | 1 |
| 32***01 | Element | 1 |
| 32***02 | Seal | 1 |
E3-6-1 Valve, Components, Excavator
| 13***06 | Bolt | 12 |
| 24***14 | O Ring | 1 |
| 24***04 | O Ring | 1 |
E3-5-2 Valve, Assembly, Excavator, Sideshift
| 12***00 | Restrictor | 2 |
| 13***34 | Bolt | 2 |
| 13***03 | Nut | 1 |
E3-6-2 Valve, Components, Excavator
| 24***07 | O Ring | 12 |
| 24***17 | O Ring | 7 |
| 92***22 | Seal, Wiper | 6 |
E3-5-1 Valve, Assembly, Excavator, Centremount
| 13***34 | Bolt | 1 |
| 13***01 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 12 |
E3-2-2 Valve, Relief, Check & Overload, Loader Valve
| 13***02 | Nut | 1 |
| 24***07 | O Ring | 1 |
| 24***11 | O Ring | 2 |
E3-2-5 Valve, Spool, Electric Detent, Loader Valve
| 24***07 | O Ring | 2 |
| 25***09 | O Ring | 2 |
| 25***18 | Spacer | 2 |
E3-8-1 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***17 | Element, Spin-On Canister | 1 |
E3-6-4 Valve, Rotary Clamp
| 14***11 | Seal, Bonded | 1 |
| 24***15 | O Ring | 1 |
| 92***54 | O Ring | 1 |
E3-3-1 Valve, Auxiliary, & Adapters
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***04 | Adapter, Male/Male | 4 |
E3-2-4 Valve, Spool, Mechanical Detent, Loader Valve
| 24***05 | O Ring | 1 |
| 24***20 | O Ring | 2 |
| 24***07 | O Ring | 1 |
E3-2-6 Valve, Relief, Loader Valve
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
E3-2-1 Loader Valve M.R.V.
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 2 |
| 25***01 | Nut | 1 |
E3-2-3 Valve, Spool, Standard, Loader Valve
| 24***07 | O Ring | 2 |
| 25***09 | O Ring | 2 |
| 25***18 | Spacer | 2 |
E3-5-3 Valve, Assembly, Excavator, Centremount, Sideshift
| 12***00 | Restrictor | 3 |
| 13***34 | Bolt | 1 |
| 13***36 | Bolt | 1 |
E3-4-1 Components, Auxiliary Valve
| 13***02 | Nut | 1 |
| 24***06 | O Ring | 2 |
| 24***16 | O Ring | 1 |
E4-3-1 Ram, Stabiliser, Sideshift
| 55***01 | Head, Piston | 1 |
| 55***00 | Rod, Piston | 1 |
| 55***01 | Cap, End | 1 |
E4-6-4 Valve, Check
| 13***06 | Bolt | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***04 | Washer | 2 |
E4-6-2 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 14***16 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E4-2-6 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-8 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-1 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-3 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-4-3 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-3-4 Ram, Stabiliser, Sideshift
| 55***01 | Cap, End | 1 |
| 55***02 | Head, Piston | 1 |
| 55***00 | Ram, Stabiliser, Sideshift; Standard. X= Early Type See E4-3-1. Y= Later Type See List Below., Ram, Stabiliser, Sideshift | 1 |
E4-3-5 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***11 | Seal, Bonded | 4 |
E4-1-4 Ram, Lift, Selflevel Loader Arm
| 12***15 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-3-2 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-4-1 Ram, Attachment
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 12***22 | Bush | 1 |
E4-1-2 Ram, Lift, Selflevel Loader Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-2-7 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-6-3 Valve, Ram Lockout, Check
| 13***30 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
E4-7-1 Ram, Assembly, Service Exchange
E4-6-1 Check Valve, Components
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
| 24***09 | O Ring | 1 |
| 24***13 | O Ring | 2 |
E4-2-9 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-2-5 Ram, Backhoe
| 12***15 | Bush | 1 |
| 12***21 | Bush | 2 |
| 14***01 | Washer, Aluminium | 1 |
E4-1-3 Ram, Lift, Basic Loader Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-3 Ram Assy., Stabiliser With Chec, K Valve - Sideshift
| 55***01 | Head, Piston | 1 |
| 55***00 | Rod, Piston | 1 |
| 55***01 | Cap, End | 1 |
E4-2-4 Ram, Backhoe, With Check Valve
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***17 | Bush | 2 |
E4-3-6 Ram, Stabiliser, Sideshift, With Check Valve
| 14***11 | Seal, Bonded | 4 |
| 16***02 | Adapter | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
E4-5-2 Seal Kits, Extension Ram, Jaw Bucket
| 21***13 | Pin, Cotter, Split | 1 |
| 21***16 | Pin, Split | 1 |
| 24***26 | O Ring, 4.00in | 1 |
E4-4-2 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-5-1 Seal Kits, Backhoe Rams
| 24***01 | O Ring | 1 |
| 24***15 | O Ring | 1 |
| 24***18 | O Ring | 1 |
E4-1-1 Ram, Lift, Basic Loader Arm
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-3-7 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***29 | Bracket | 2 |
E4-8-1 Ram, Side Tip Shovel
| 98***01 | Ram | 1 |
| 98***03 | Pin, Rod End | 1 |
| 98***09 | Rod, Piston | 1 |
E4-2-2 Ram, Backhoe
| 12***15 | Bush | 2 |
| 12***21 | Bush | 2 |
| 12***17 | Bush | 2 |
F Axles, Wheels & Transmission
F1-4-1 Mountings, 498 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 1 |
| 12***00 | Mounting | 1 |
F1-4-2 Mountings, 4.236 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
F1-1-1 Gearbox Housing
| 05***01 | Gasket | 1 |
| 05***02 | Cover; N.L.A. Recommend Customer Go'S To Used Parts, Dealer. B Borsley'S Requested This. | 1 |
| 05***03 | Bolt | 6 |
F1-3-1 Gearbox Components
| 05***55 | Shim, 0.003in | 0 |
| 05***06 | Seal, Oil | 1 |
| 05***08 | Seal, Oil | 2 |
F1-2-1 Gear Change
| 05***16 | Rod | 1 |
| 05***17 | Spring | 1 |
| 05***18 | Ball | 2 |
F2-4-1 Valve, Shuttle
| 04***58 | Spring | 1 |
| 04***59 | Valve, Assembly, Forward/Reverse | 1 |
| 04***61 | Seal | 1 |
F2-5-1 Flywheel & Housing, 498 Engine
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
F2-2-1 Forward Clutch
| 04***01 | Seal | 2 |
| 04***20 | Gear, Drive | 1 |
| 04***21 | Gear, Hub | 1 |
F2-5-2 Flywheel & Housing, 4.236 Engine
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
F2-7-1 Propshaft, Transmission Drive
| 13***12 | Bolt | 8 |
| 13***03 | Nut | 8 |
| 14***03 | Nipple, Grease | 1 |
F2-1-1 Transmission, Shuttle Reverser
| 04***47 | Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve., Lowing Parts 81***78 + 04/50***01 Ti Gen046. W When Fitting New Housing Please Order The Fol, Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve. | 1 |
| 04***48 | Sleeve | 1 |
| 04***49 | Ring, Spacer | 1 |
F2-8-1 Filter
| 02***09 | Seal | 1 |
| 32***00 | Filter | 1 |
| 98***38 | Element, Oil Filter | 1 |
F2-3-1 Clutch, Reverse, & Drive Pump
| 04***01 | Seal | 2 |
| 04***02 | Bearing | 1 |
| 04***03 | Carrier, Assembly | 1 |
F2-6-1 Circuit, Oil Cooler, Torque Converter
| 04***90 | Pipe; Use 04/50***04. | 1 |
| 04***91 | Elbow | 1 |
| 04***92 | Pipe | 1 |
F3-3-2 Crown Wheel & Pinion, - German
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-2-1 Differential, Assembly
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F3-3-1 Crown Wheel & Pinion, - Std.
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-2-3 Differential, Assembly
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F3-1-2 Axle Assembly, German, 24.494 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F3-1-1 Axle Assembly - Std., 18.295 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F3-2-2 Differential, Assembly - German
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F3-3-3 Crown Wheel & Pinion
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F3-3-4 9802/8000 F3-3-4
| 13***08 | Bolt | 1 |
| 45***03 | Trunnion | 1 |
| 45***07 | Pin, Lock | 1 |
F3-2-4 9802/8000 F3-2-4
| 13***05 | Bolt | 1 |
| 13***10 | Bolt | 1 |
| 14***06 | Washer | 1 |
F3-1-3 Axle Assembly, 15.587 : 1
| 10***01 | Nut | 16 |
| 13***52 | Bolt | 4 |
| 13***09 | Bolt | 28 |
F3-4-1 Wheels & Tyres
| 10***01 | Nut | 1 |
| 41***00 | Wheel, 18.4/15x26 | 1 |
| 41***00 | Wheel, 14x28 | 1 |
F4-5-1 Wheels & Tyres, 4wd
| 10***14 | Nut | 1 |
| 10***15 | Washer | 1 |
| 10***01 | Nut | 26 |
F4-1-1 Axle Assembly, 4wd
| 10***01 | Nut | 16 |
| 13***09 | Bolt | 28 |
| 13***52 | Bolt | 4 |
F4-3-1 Crown Wheel & Pinion, 4wd
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F4-2-1 Differential, Housing Assembly, 4wd
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F4-4-1 Propshafts, Axle Drive 4wd
| 12***01 | Strap | 1 |
| 12***02 | Plate | 1 |
| 12***03 | Clip, Steady | 1 |
F4-3-2 Crown Wheel & Pinion, 4wd - German
| 13***05 | Bolt | 1 |
| 13***08 | Bolt | 12 |
| 45***03 | Trunnion | 1 |
F4-2-2 Differential, Housing Assembly, 4wd - German
| 13***05 | Bolt | 14 |
| 13***09 | Bolt | 16 |
| 13***10 | Bolt | 16 |
F4-1-2 Axle Assembly, 4wd, German
| 10***01 | Nut | 16 |
| 13***09 | Bolt | 28 |
| 13***52 | Bolt | 4 |
G Brakes
G1-1-1 Brake System
| 12***00 | Pipe, Rh | 1 |
| 12***00 | Pipe, Lh | 1 |
| 12***00 | Pipe, Rh | 1 |
G1-3-1 Brake, Parking
| 13***10 | Bolt | 4 |
| 14***08 | Washer, Spring | 4 |
| 15***01 | Pivot, Seat; Replaced By Nla, See San 11411 | 1 |
G1-2-1 Brake Assembly
| 13***09 | Bolt | 16 |
| 13***07 | Capscrew | 12 |
| 45***01 | Plate, Back | 2 |
H Steering
H1-2-1 Circuit, Steering
| 14***11 | Seal, Bonded | 1 |
| 61***00 | Hose; See Note 1. Kit Is Supplied With Connection Hoses 61***00, Hose; See Note 1. Kit Is Supplied With Hoses 61***00, Hose | 2 |
| 61***00 | Hose | 1 |
H1-7-1 Ram, Steering
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***56 | Circlip | 1 |
| 24***15 | O Ring | 1 |
H1-4-2 Pump, Steering, 4.236 Engine
| 12***02 | Gear | 1 |
| 13***12 | Bolt | 1 |
| 13***18 | Bolt | 2 |
H1-3-1 Steering Column
| 11***03 | Clip | 4 |
| 12***03 | Mounting | 1 |
| 12***06 | Washer, Grooved | 1 |
H1-3-2 Steering Column
| 11***03 | Clip | 4 |
| 12***08 | Spacer | 2 |
| 12***01 | Wheel, Steering; Re J Smith Is Only Available From Manufacture, In Qty Of 500 Use 11***22, 11***08 | 1 |
H1-1-1 Axle Assembly Front, And Steering 2-Wd
| 12***01 | Pin, King | 2 |
| 12***02 | Pin, Cotter | 2 |
| 12***03 | Axle, Stub | 2 |
H1-7-2 Ram, Steering
| 13***10 | Bolt | 2 |
| 13***16 | Bolt | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-4-1 Pump, Steering, 4.98nt Engine
| 03***02 | Pump, Steering | 1 |
| 13***30 | Bolt, Long | 4 |
| 14***06 | Washer | 4 |
H1-6-1 Valve, Shock, Steering, Optional
| 13***10 | Screw, Cap | 2 |
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
H1-5-1 Valve, Steering
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 2 |
| 16***10 | Adapter | 2 |
H1-2-2 Circuit, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H2-6-2 Ram, Steering, 4wd, Jcb Axle
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, 90deg. Angle | 2 |
| 24***06 | O Ring | 1 |
H2-8-4 Differential, Assembly, 4wd Axle
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing | 1 |
| 10***02 | Stud | 4 |
H2-7-1 Circuit, Steering, 4wd
| 14***11 | Seal, Bonded | 1 |
| 61***00 | Hose | 2 |
| 61***00 | Hose | 1 |
H2-3-1 Hub & Components
| 10***14 | Nut | 12 |
| 10***15 | Washer | 12 |
| 10***17 | Nipple | 4 |
H2-8-1 Axle Assembly
| 12***01 | Pin, Lock | 2 |
| 13***28 | Bolt | 1 |
| 13***05 | Bolt | 2 |
H2-2-1 Knuckle, Steering, 4wd Axle
| 10***02 | Pin, King | 4 |
| 10***05 | Seal | 4 |
| 10***06 | Shim, 0.1 | 4 |
H2-8-3 Hub & Components
| 10***01 | Nut | 10 |
| 13***07 | Bolt | 32 |
| 13***08 | Bolt | 12 |
H2-1-1 Axle Assembly Front, 4wd And Steering
| 10***00 | Axle, Assembly, Steering | 1 |
| 10***01 | Casing | 1 |
| 10***03 | Pin, Pivot | 2 |
H2-6-1 Ram, Steering, 4wd, Front
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 22***56 | Circlip | 1 |
| 24***15 | O Ring | 1 |
H2-4-1 Differential, Housing Assembly
| 10***01 | Housing | 1 |
| 10***02 | Bracket | 1 |
| 10***03 | Flange | 1 |
H2-7-2 Circuit, Steering, 4wd
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H2-5-1 Differential, Assembly, 4wd Axle
| 10***00 | Differential, Assembly | 1 |
| 10***01 | Housing | 1 |
| 10***02 | Flange | 1 |
H2-8-2 Knuckle, Steering, 4wd Axle
| 12***01 | Pin, Lock | 2 |
| 13***05 | Bolt | 2 |
| 13***08 | Bolt | 16 |
K Engine, Blmc 4.98nt
K1-8-1 Flywheel & Housing, 4.98 Engine
| 02***18 | Plate | 1 |
| 02***19 | Bolt | 6 |
| 02***20 | Ring, Starter | 1 |
K1-5-1 Timing Gears
| 01***01 | Pulley, And Adapter | 1 |
| 02***01 | Block, Assembly, Cylinder | 1 |
| 02***02 | Belt, Drive | 1 |
K1-6-1 Gears, Oil Pump Drive
| 02***10 | Washer | 1 |
| 02***11 | Spindle | 1 |
| 02***12 | Collar | 1 |
K1-1-0 Engine Build, Identification
K1-4-1 Timing Case
| 02***08 | Casing, Timing | 1 |
| 02***09 | Cover, Timing | 1 |
| 02***10 | Plate, Lifting, Front | 1 |
K1-3-1 Crankshaft, Bearings, Pistons, Con-Rods, & Cylinder Liners
| 02***01 | Liner, Cylinder | 4 |
| 02***02 | Shim, 0.004in.(0.102mm) | 0 |
| 02***03 | Shim, 0.005in.(0.127mm) | 0 |
K1-1-1 Engine Basic
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
| 01***00 | Engine, Complete, 4.98tt Turbocharged | 1 |
| 01***00 | Engine, Complete, 4.98nt Nat/Aspirated | 1 |
K1-2-1 Block Assembly
| 02***94 | Tap, Drain | 1 |
| 02***00 | Block, Cylinder | 1 |
| 02***01 | Dowel, Hollow | 2 |
K1-7-1 Mountings, 4.98 Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 1 |
| 12***00 | Mounting | 1 |
K2-4-1 Gasket Sets
K2-2-1 Rocker Assembly, Push Rods & Tappets
K2-1-1 Cylinder Head
| 01***03 | Plate, Rear | 1 |
| 02***15 | Valve, Inlet | 4 |
| 02***16 | Valve, Exhaust | 4 |
K2-3-1 Covers, Rocker & Tappet
K2-1-0 Engine Build, Identification
K2-1-2 Cylinder Head
K3-1-2 Manifold, Induction, Turbo
K3-3-2 Manifold, Exhaust, & Silencer, Turbo
K3-1-0 Engine Build, Identification
K3-2-1 Filter, Air, Nat/Aspirated
K3-3-1 Manifold, Exhaust, & Silencer, Nat/Aspirated
K3-2-2 Filter, Air, Turbo
K3-1-1 Manifold, Induction, Nat/Aspirated
K4-3-2 Radiator, Hoses & Fittings, Turbo
K4-4-2 Thermostat, Housing, Inlet & Outlet
K4-1-1 Pump, Water
K4-3-1 Radiator, Hoses & Fittings, Nat/Aspirated
K4-2-1 Radiator, Fittings & Mountings, Nat/Aspirated
K4-1-2 Pump, Water
K4-1-0 Engine Build, Identification
K4-2-2 Radiator, Fittings & Mountings, Turbo
K4-4-1 Thermostat, Housing, Inlet & Outlet
K5-2-1 Pump, Oil
K5-2-2 Pump, Oil
K5-3-1 Filter, Oil
K5-5-1 Cooler, Oil Filter, Turbocharger Pipework
K5-1-0 Engine Build, Identification
K5-1-1 Sump, Oil
K5-4-1 Oil Feed Pipework
K6-1-0 Engine Build, Identification
K6-1-1 Fuel System
K6-6-1 Filter, Fuel Sediment
| 13***03 | Nut | 2 |
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
K6-3-1 Injectors, Fuel
| 13***09 | Bolt | 2 |
| 14***05 | Washer; Replaces 82***03 | 2 |
| 17***05 | Nut | 1 |
K6-5-2 Filter, Fuel, Short
| 20***06 | Seal | 2 |
| 20***07 | Bolt, Centre | 1 |
| 20***08 | Washer | 1 |
K6-4-2 Pump, Fuel Lift
| 17***00 | Pump, Fuel Lift | 1 |
| 17***11 | Kit-Repair | 1 |
| 17***12 | Kit-Seal | 1 |
K6-5-1 Filter, Fuel, Long
| 13***16 | Bolt | 2 |
| 13***01 | Nut | 2 |
| 14***03 | Washer | 2 |
K6-2-1 Pump, Fuel Injection, Installation
K6-4-1 Pump, Fuel Lift
| 12***00 | Rod, Pull | 1 |
| 13***03 | Screw, 1/4 Unf X .625 | 1 |
| 13***06 | Bolt | 1 |
L Engine, 4.236
L1-1-1 Block Assembly, Imperial, Ld & Lh Builds
| 02***16 | Bolt, 89mm | 6 |
| 02***17 | Bolt, 105mm | 12 |
| 02***01 | Thimble | 10 |
L1-7-2 Engine, Complete, Lh Build
| 01***00 | Engine, Imperial, Complete, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated; & 1, Lh50205. Fuel Filter & Pipework,Fan Belt,Outlet Connection & Inlet/Exhaust Manifolds., Engine, Imperial, 4.236 Compensated | 1 |
L1-8-3 Engine, Short, Imperial, Lh & Lj Builds
| 02***09 | Engine, Short, Imperial | 1 |
L1-7-1 Engine, Complete, Ld Build
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
| 01***0R | Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated; See Note 2. Fuel Filter & Pipework, Fan Belt, Thermostat,Outlet Connection & Inlet, Exhaust Manifolds. | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
L1-4-1 Flywheel & Housing, Ld,Lh & Lj Builds
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
L1-3-2 Timing Case, Camshaft & Gears, Lj Build
| 02***02 | Casing, Timing | 1 |
| 02***05 | Gasket, Timing Case | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
L1-3-1 Timing Case, Camshaft & Gears, Ld & Lh Builds
| 02***02 | Casing, Timing | 1 |
| 02***03 | Cover, Timing | 0 |
| 02***04 | Seal, Front Oil | 0 |
L1-2-3 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Lj Build
| 02***38 | Key | 1 |
| 02***27 | Bolt | 1 |
| 02***28 | Nut | 1 |
L1-7-3 Engine, Complete, Lj Build
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged | 1 |
| 01***0R | Engine, Imperial, 4.236 Turbocharged | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Superseded By N.S.P. Part No Longer Available Use 01/11***00 And Refer To T.I.K135/H, K129/E., Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 S/Seded By N.S.P. Part No Longer Available Use 02/11***00 And Refer To T.I.K135/H - K129/E., Engine, Imperial, Complete, 4.236 Turbocharged, Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Supersede By N.S.P. Part No Longer Available, Use 01/11***00 And Refer To T.I.K135/H K129/E. | 1 |
L1-6-1 Engine Mountings, Ld,Lh & Lj Builds
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
L1-1-3 Block Assembly, Imperial, Lj Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***03 | Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip-Fit Type., Liner, Press Fit, Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip Fit Type., Liner, Press Fit; Flame Ring Type. This Requires Specialised Tools For Fitting, For General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing,For General Service Use Slip-Fit., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Refer To Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. This Requires Specialised Tools For Fitting, For General Service, Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type. | 4 |
L1-8-1 Short Engine
| 02***25 | Engine, Short, Imperial | 1 |
L1-2-1 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Ld & Lh Builds
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***08 | Piston, Assembly, Oversize - .030inch | 4 |
| 02***09 | Kit-Piston Ring | 4 |
L2-1-4 Cylinder Head, Lj Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***21 | Holder, Collet | 8 |
L2-1-1 Cylinder Head, Ld Build
| 02***14 | Head, Assembly, Cylinder | 1 |
| 02***15 | Nut | 2 |
| 02***18 | Spring, Valve, Inner | 8 |
L2-3-2 Rocker Assembly, Push Rods & Tappets, Ld, Lh & Lj Builds
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-4-1 Turbo, Heatshield, Lh & Lj Builds
| 02***15 | Guard, Heat | 1 |
| 02***00 | Guard, Heat | 1 |
| 02***80 | Shield, Heat | 1 |
L2-1-3 Cylinder Head, Ld & Lh Builds
| 02***24 | Collet | 8 |
| 02***26 | O Ring; Exhaust. Used Only With Cylinder Heads 02/10***82 And 02/10***24., O Ring, O Ring; Inlet & Exhaust. No Longer Required | 4 |
| 02***48 | Plug | 1 |
L2-3-1 Rocker Assembly, Push Rods & Tappets, Ld Build
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-1-2 Cylinder Head, Lj Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***20 | Seat, Spring | 8 |
L2-2-1 Rocker Cover, Ld Build
| 02***35 | Cover, Rocker | 1 |
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***80 | Pipe | 1 |
L2-2-2 Rocker Cover, Lh & Lj Builds
| 02***37 | Cap, Oil Filler | 1 |
| 02***80 | Pipe | 1 |
| 02***22 | Seal | 1 |
L3-2-2 Manifold, Exhaust, Lh & Lj Builds
| 02***50 | Gasket | 1 |
| 02***51 | Nut | 4 |
| 02***17 | Manifold, Exhaust | 1 |
L3-1-2 Manifold, Induction, Lh & Lj Builds
| 02***16 | Manifold, Induction | 1 |
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
L3-5-1 Silencer & Extension, Ld Build
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust Extension | 2 |
L3-1-1 Manifold, Induction, Ld Build
| 02***45 | Manifold, Induction | 1 |
| 02***46 | Gasket | 1 |
| 02***47 | Gasket | 1 |
L3-4-8 Filter, Air, Ld Build
| 12***02 | Bracket | 1 |
| 13***04 | Bolt | 2 |
| 13***10 | Bolt | 1 |
L3-4-1 Filter, Air, Ld Build
| 12***00 | Bracket, Air Filter Mounting | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pad, Mounting | 4 |
L3-4-6 Filter, Air, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Hose, Assembly, Induction | 1 |
| 12***01 | Hose, Induction Elbow | 1 |
L3-5-6 Silencer & Extension, Lh & Lj Builds
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust | 1 |
L3-2-1 Manifold, Exhaust, Ld Build
| 02***49 | Manifold, Exhaust | 1 |
| 02***50 | Gasket | 2 |
| 02***51 | Nut | 4 |
L4-1-1 Pump, Water, Ld Build
| 02***66 | Pump, Water | 1 |
| 02***67 | Gasket | 1 |
| 02***70 | Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7,9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump, Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1. & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit., Kit-Repair, Water Pump; Contains Items 3,4,5,6,7,8,9,10,11,12,13 & 27. Items 7,8,9 & 11, Repaired And Replaced By K It 02/10***87., Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 Are No Longer Required, Repaired And Replaced By Kit 02/10***87. | 1 |
L4-4-1 Radiator & Hoses
| 12***02 | Tube | 1 |
| 12***00 | Bottle, Expansion | 1 |
| 12***02 | Cap, Filler | 1 |
L4-3-3 Thermostat, Housing, Inlet & Outlet, Lh & Lj Builds
| 02***95 | Plug, Taper | 2 |
| 02***99 | Gasket | 1 |
| 02***59 | Connector, Water Outlet | 1 |
L4-1-4 Pump, Water, Lh & Lj Builds
| 02***67 | Gasket | 1 |
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
L4-3-1 Thermostat, Housing, Inlet & Outlet, Ld Build
| 02***71 | Thermostat | 1 |
| 02***98 | Housing, Thermostat | 1 |
| 02***99 | Gasket | 1 |
L4-4-6 Radiator, Hoses & Fittings, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
L4-4-7 Radiator, Hoses & Fittings, Ld Build
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
| 12***03 | Hose, Overflow Assembly | 1 |
L4-1-3 Pump, Water, Lh & Lj Builds
| 02***67 | Gasket | 1 |
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
L5-2-4 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 0 |
| 02***71 | Head, Filter | 0 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 0 |
L5-2-3 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 1 |
| 02***71 | Head, Filter | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
L5-1-1 Sump, Oil Pump, & Fittings, Ld,Lh & Lj Builds
| 02***59 | Sump, Oil | 1 |
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
L5-2-1 Filter, Oil, Ld Build
| 02***63 | Gasket | 1 |
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***71 | Head, Filter | 1 |
L6-7-1 Filter, Fuel, Ld,Lh & Lj Builds
| 02***89 | Bracket | 1 |
| 02***94 | Banjo | 1 |
| 02***95 | Valve, Non-Return | 1 |
L6-1-4 Pump, Fuel Injection, Lj Build
| 17***00 | Pump, Fuel Injection; 0r 3241f881 If Totally Stuck Use 3348f212 To, Modify And Recalibrate To Make 3241f790 | 1 |
| 17***02 | Screw | 1 |
| 17***03 | Nut | 3 |
L6-1-3 Fuel Injection, Equipment, Lj Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 3 |
L6-1-1 Fuel Injection, Equipment, Ld & Lh Builds
| 02***53 | Washer | 4 |
| 02***54 | Pipe, No.1 Cylinder | 1 |
| 02***55 | Pipe, No.2 Cylinder | 1 |
L6-3-2 Controls, Throttle & Stop, Swedish Builds
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 10***01 | Connector | 1 |
L6-9-6 Fuel System, Lj Build
| 02***82 | Pipe, Assembly, Fuel, L/Pump To Filter | 1 |
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
L6-9-1 Fuel System, Ld & Lh Builds
| 02***82 | Pipe, Assembly, Fuel, L/Pump To Filter | 1 |
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
L6-2-1 Bracket, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 02***90 | Bracket | 2 |
L6-3-1 Controls, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
L6-1-2 Pump, Fuel Injection, Ld & Lh Builds
| 17***00 | Pump, Fuel Injection | 1 |
| 17***00 | Pump, Fuel Injection | 1 |
| 17***02 | Screw | 1 |
L6-4-2 Pump, Fuel Lift, Alternative
| 17***12 | Kit-Seal | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
| 17***19 | Kit-Repair, Fuel Lift Pump | 1 |
L6-6-1 Filter, Fuel Sediment, Ld,Lh & Lj Builds
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
L6-4-1 Pump, Fuel Lift, Ld,Lh & Lj Builds
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***98 | Screw | 1 |
L8-3-3 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
L8-2-2 Turbocharger, Lh & Lj Builds
| 02***56 | Turbocharger | 1 |
| 02***57 | Housing, Assembly, Centre | 1 |
| 02***58 | Nut, Lock | 1 |
L8-3-2 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***87 | Olive | 1 |
| 02***10 | Washer | 4 |
L9-1-1 Gaskets Sets
| 02***66 | Kit-Gasket, Bottom | 1 |
| 02***87 | Kit-Gasket, Top | 1 |
| 02***88 | Kit-Gasket, Bottom | 1 |
L9-2-1 Kit, Engine Overhaul, Ld Build
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
L9-1-2 Gasket Sets, Turbo Engine
| 02***97 | Kit-Gasket, Top | 1 |
| 02***98 | Kit-Gasket, Bottom | 1 |
| 02***89 | Kit-Gasket, Top; Lh50133,Lh50205 & Lj50183. Refer To Service Workshop Manual, Kit-Gasket, Top | 1 |
L9-2-3 Kit, Engine Overhaul, Lj Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
L9-2-2 Kit, Engine Overhaul, Lh Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***20 | Kit-Piston Ring | 4 |
| 02***35 | Seal, Front Oil | 1 |
3CX-4 Australia serial number reference
The machine identification plate is located on the right-hand side of the loader tower or cab frame. Major components such as the engine, axles, and gearbox carry their own serial plates; record all of them as the loader-tower PIN alone is not sufficient to pull the correct parts. For exact applicability verification, check the machine identification plate and confirm with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 00306001-00336999 | JCB 3CX-4 Australia Backhoe Loader Parts Catalogue applicability |
Frequently asked questions
What engine does the JCB 3CX-4 Australia use?
The JCB 3CX-4 Australia is powered by a JCB DieselMax 4-cylinder turbocharged diesel engine. It produces 74.6 kW (100 hp) of net power and 440 Nm of torque at 1,600 rpm. This engine meets Tier 4 Final emissions standards without using DEF or a DPF.
What is the operating weight of the JCB 3CX-4 Australia?
The operating weight of the JCB 3CX-4 Australia varies by configuration, typically ranging from 8,070 kg to 8,300 kg (17,790 lbs to 18,300 lbs). Exact weight depends on the specific attachment package, counterweight, and tire configuration.
What model replaced the JCB 3CX-4 Australia?
The JCB 3CX-4 Australia was succeeded by the JCB 3CX Plus. The 3CX Plus introduced updated specifications, including an 81 kW engine option and TorqueLock technology for improved fuel efficiency during roading, while maintaining the core 3CX backhoe loader platform.
What 3CX-4 Australia owners discuss
What are the common powertrain and hydraulic behaviors reported for the JCB 3CX-4 Australia?
Operators note that early 3CX models exhibit a 'lazy' or lethargic feel in forward motion due to the torque converter stall ratio. The machine utilizes a 4-speed powershift transmission with a forward/reverse shuttle. Hydraulic flow is rated at 160 L/min for the 2020 model, while older Perkins-based units rely on ISO 46 hydraulic oil. The transmission requires JCB 10W special trans oil or M2C33G specification fluid. A common symptom of transmission distress is the low pressure light illuminating when the gearbox overheats during repeated shifting attempts. The machine is designed to prioritize high-pressure hydraulic pump operation over road acceleration, making top-gear take-off difficult under load.
What are the typical undercarriage and wear patterns for this machine type?
The 3CX-4 Australia uses rubber tires, typically sized 12.5x18-10 or 18.4x26-12 depending on the configuration. Wear patterns focus on the slew ring bearing, which requires Lithium Complex (NLGI) grease with extreme pressure additives every 100 hours or monthly. The slew gearbox requires EP90 GL-4 or GL-5 oil. The king posts and slew ram seals are common leak points, particularly on older Sitemaster variants. The boom swing mechanism often develops play, indicating valve block wear or internal seal failure in the swing cylinder.
What engine quirks are associated with the 3CX-4 series?
The 3CX-4 Australia utilizes the JCB DieselMax 4-cylinder turbocharged diesel engine, producing 74.6 kW (100 hp) and 440 Nm of torque at 1,600 rpm. Older 3CX models (1996-2002) used the Perkins 1004-4T (AB) engine. A known issue with the Perkins engines is white sludge accumulation in fuel filters, indicating water contamination or fuel degradation. The DieselMax engine requires specific JCB engine oil and coolant changes to prevent silicate separation, which manifests as brown sludge in the expansion bottle. The engine is designed to run efficiently at low speeds, matching 1,300–1,400 RPM for fuel economy.
What are the common electrical and sensor issues?
A frequent failure point is the forward/reverse inhibitor switch (microswitch) located on the transmission body. If this switch fails or its wires bridge, the machine may refuse to start or lose forward drive while retaining reverse power. The shuttle direction is controlled by hydraulic solenoids on the transmission body; these can suffer from loose connections or short circuits. On newer models (2014+), operators report random starting issues linked to lift pump priming and return line restrictions in the injector lines. DEF system errors (e.g., code P204F9A) and flashing 'empty' tank indicators despite a full tank are reported on later Tier 4/Stage V compliant units.
What should be checked when buying a used 3CX-4 Australia?
Verify the exact serial number to determine the engine type (Perkins vs. DieselMax) and emissions tier. Check the forward/reverse shuttle operation for smooth engagement and listen for solenoid clicks. Inspect the slew ring bearing for play and check the king posts for hydraulic leaks. Test the torque converter filter for metal filings. Verify the condition of the boom swing cylinder seals and the front pump shaft seals, which are common leak sources. Ensure the transmission fluid is clean and at the correct level, and check for brown sludge in the coolant expansion bottle. Confirm the functionality of the inhibitor switch and all forward/reverse solenoids.
What are the critical fluid specifications for the 3CX-4 Australia?
Engine: 15W-40 diesel-rated oil (11 liters for Perkins, capacity varies for DieselMax). Transmission: JCB 10W special trans oil or M2C33G specification (18.8 liters for older gearboxes). Hydraulic System: JCB HP46 or ISO 46 hydraulic oil (118 liters capacity). Front/Rear Axles: 10W30 UTTO/GL-4/M2C fluid (28 liters). Brakes: Hydraulic Oil ISO 15 HVI (1.2 liters). Coolant: JCB multipurpose coolant to prevent silicate separation. Grease: JCB Grease Special or Lithium Complex for slew ring.
How does the 3CX-4 Australia handle heavy lifting and digging?
The machine offers a loader bucket capacity of 1.0–1.3 m³ (1.3–1.7 yd³) and a backhoe bucket capacity of 0.2–0.3 m³ (0.26–0.39 yd³). Max digging depth is 5,870 mm (19 ft 3 in) with a max reach of 6,245 mm (20 ft 6 in). The loader lift capacity is 3,300 kg. The hydraulic system provides 160 L/min flow for fast cycle times. The machine is designed for utility, municipal, and agricultural work, balancing compact size with heavy-duty capability. The TorqueLock feature reduces fuel consumption during roading.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Jcb 3CX-4 Australia. Related factory variants of the same model family:
3CX-4 Australia
Need a specific 3CX-4 Australia part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.