JCBconstructionbackhoe loader 2cx, 210, 212, midi cx
Jcb 2CX LOADER
Maintenance schedule, common problems & OEM parts breakdown
The JCB 2CX is a compact backhoe loader designed for utility, landscaping, and general contracting work. Produced from 2006 to 2012, it succeeded the 2CX II and was later replaced by the 2CX Plus. The machine features a heavy-duty one-piece mainframe and a fully enclosed engine compartment. It is powered by a four-cylinder direct injection diesel engine, typically a Perkins unit in earlier models and a JCB Dieselmax or Kohler unit in later versions, producing approximately 51.5 kW (69 hp) to 53.91 kW (72 hp). Operating weight ranges from 5,200 kg to 6,355 kg depending on configuration. The 2CX utilizes a hydrostatic drive system for stepless travel and four-wheel steering, distinguishing it from the Powershift transmissions found in larger JCB backhoes. Configurations included the standard 2CX, the 2CX Utility with street pads and hammer pipework, and the 2CX Streetmaster with an excavator quickhitch.
Across its production life, the 2CX evolved from the 2CX II platform, introducing a side-shift back-end design option and updated emissions-compliant engines. The machine matters in the used and parts market because its hydrostatic drivetrain offers superior maneuverability in tight spaces compared to the geared transmissions of its larger siblings. The compact dimensions and 4x4x4 drive capability make it a staple for municipal and residential work. Parts availability remains high due to the shared components with the 3CX and 4CX series, particularly the engine architecture and hydraulic systems. The transition from Perkins to JCB Dieselmax engines in later serial ranges requires specific fluid and filter knowledge, making accurate service data critical for maintenance.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 2CX LOADER specifications
Engine
| Model | JCB 2257 |
| Gross Power | 55.3 hp (41.24 kW) |
| Net Power | 51.5 hp (38.4 kW) |
| Displacement | 268.6 cu in (4,401.58 cu cm) |
| Cylinders | 4 |
| Aspiration | Naturally aspirated |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 14,010.4 lb (6,355 kg) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 16.84 ft (5.15 m) |
| Transport Width | 6.07 ft (1.86 m) |
| Transport Height | 9.85 ft (3.0 m) |
| Wheelbase | 6.53 ft (2.01 m) |
| Ground Clearance | 1.12 ft (0.34 m) |
| Height to Top of Suspended Cab | 8.7 ft (2.65 m) |
Performance
| Travel Speed Forward | 21.3 mph (34.28 kph) |
| Travel Speed Reverse | 21.3 mph (34.28 kph) |
| Max Bucket Dig Force | 9,259 lb (4,199.82 kg) |
| Loader Bucket Breakout Force | 7,921 lb (3,599.26 kg) |
| Lift Capacity at Full Height | 4,844 lb (2,199 kg) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 22 gal (83.27 liter) |
| Hydraulic System | 22 gal (83.27 liter) |
| Engine Oil | 4 gal (15.14 liter) |
| Cooling System | 4.8 gal (18.17 liter) |
| Transmission | 4.5 gal (17.03 liter) |
| Front Axle | 2.4 gal (9.08 liter) |
| Rear Axle | 2.4 gal (9.08 liter) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
2CX LOADER fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 11.1 l (2.5 UK gal) | JCB 15W/40 Multigrade (-10 C to 50 C / 14 F to 122 F); JCB Super Universal Agricultural (-15 C to 30 C / 5 F to 86 F); JCB 10W/30 Multigrade |
| Cooling System | 18 l (4.8 gal) | Not specified in source text |
| Fuel Tank | 83.2 l (18.3 UK gal) | Diesel Oil |
| Transmission/Powertrain | Not specified in source text | Not specified in source text |
| Final Drives | Not specified in source text | Not specified in source text |
| Hydraulic System and Tank | Not specified in source text | Not specified in source text |
| Axles/Differentials | Not specified in source text | Not specified in source text |
| Grease | N/A | Not specified in source text |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 2CX LOADER maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 2CX LOADER beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor engine oil and hydraulic fluid samples at every 500-hour interval to detect early wear. The 2CX hydrostatic drive requires clean hydraulic oil; inspect the return line filter magnet for metallic debris before disposal. Check the hydraulic tank sight glass with the loader and backhoe in the travel position. Use JCB 15W/40 Multigrade oil meeting API specifications for the engine. Verify coolant concentration annually to prevent corrosion in the aluminum heat exchangers. Track fuel filter restriction to protect the common-rail injectors from contamination.
Corrective & Common Repairs
Address kingpost pivot pin wear regularly, as it carries the highest load on the backhoe structure. Inspect the loader arm safety strut mounting points for fatigue cracks. Check the self-adjusting, oil-immersed multi-disc brakes for wear and proper fluid level. Replace drive belts if tension drops below specification. Inspect cylinder rods on the loader and backhoe for scoring that causes seal leakage. Verify the integrity of the high-tensile mounting bolts on the boom and chassis, tightening to 200 Nm (148 lbf ft) if necessary.
Overhaul & Rebuild Points
Plan hydraulic system overhaul at 2,000 hours with a full tank drain and cleaning. Inspect the hydrostatic pump and motor for internal leakage if travel speed drops. Check the final drive output shafts for seal leaks and bearing play. Inspect the turbocharger shaft play and wastegate function on Dieselmax engines. Examine the swing ring bolts on the backhoe for loosening. Measure the wear on the loader arm pins and bushings to determine if replacement is required before structural damage occurs.
Seasonal & Environment Servicing
In hot climates, verify the pressurized 14.5 psi (1.0 bar) suction fan and cooling system integrity. Check the air cleaner restriction indicator frequently in dusty conditions. In cold weather, use JCB Super Universal Agricultural oil rated to -15°C (5°F) or lower. Inspect the battery electrolyte level and charge status before winter. Ensure the defroster and HVAC system function correctly for cab visibility. Grease all pivot points more frequently in wet or muddy conditions to prevent corrosion and binding.
2CX LOADER common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 320/07057 | Filter, Fuel | Fuel system service | Check fitment → |
| 32/925914 | Filter, Fuel Sediment 30m, Reverse Flow | Fuel system service | Check fitment → |
| 32/925975 | Element, Fuel Filter, 150micron Rev/Flow | Fuel system service | Check fitment → |
| 32/925705 | Element, Fuel Sediment/Water, 150 Microns | Fuel system service | Check fitment → |
| 32/925694 | Element, Fuel Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
2CX LOADER fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0335 | Crankshaft Position Sensor 'A' Circuit No Signal | Faulty crankshaft position sensor, damaged wiring harness, or sensor alignment issue. | Inspect sensor wiring for damage and check sensor mounting; replace sensor if circuit is intact. |
| P0336 | Crankshaft Position Sensor 'A' Circuit Signal Fault | Torque reduction triggered by erratic or out-of-limit crank signal. | Verify sensor gap and signal integrity; check for mechanical interference with the sensor target. |
| P0101 | Mass Air Flow (MAF) Sensor Fault | MAF sensor malfunction or contaminated air intake system. | Clean the MAF sensor element and inspect the air intake path for blockages or leaks. |
| P0102 | MAF Sensor Low Voltage Fault | MAF sensor circuit short to ground or low voltage signal. | Check MAF sensor power supply and ground connections; inspect wiring for shorts. |
| P0103 | MAF Sensor High Voltage Fault | MAF sensor circuit open or high voltage signal. | Inspect MAF sensor connector for corrosion or loose pins; test sensor output voltage. |
| P0321-87 | CAN Bus Message Error for Engine Speed from Engine ECU | Communication failure on the CAN bus network between engine ECU and other modules. | Check CAN bus wiring continuity and termination resistors; verify ECU connections. |
| P029B | Injector Drift Fault Detection on Injector 2 | Injector 2 mechanical drift exceeding calibrated threshold limits. | Test Injector 2 electrical and mechanical performance; replace if drift persists. |
| P0330 | Knock Sensor 1 Circuit | Faulty knock sensor or open/short circuit in the sensor wiring. | Inspect knock sensor mounting and wiring; replace sensor if circuit is functional. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
2CX LOADER attachments & work tools
Loader Buckets
JCB provides high-capacity buckets drilled to accept optional auxiliary cutting edges or teeth. The standard loader bucket is included in the operating weight calculation for the base machine.
Quickhitch Systems
An optional hydraulic loader quickhitch allows for quick switching between shovel and forks. The 2CX Streetmaster variant specifically features an excavator quickhitch for utility market applications.
Backhoe Buckets
Buckets are designed with specific pin positions to maximize tearout, load retention, and straight wall digging characteristics. The standard rear attachment is a 24-inch general purpose backhoe bucket.
Specialized Attachments
Compatible tools include scrap grapples for recycling, brush grapples for land clearing, ditch buckets for utility installation, and pallet forks for load retention.
Hydraulic Requirements
The open center hydraulic system uses a single gear pump to supply oil for the loader, backhoe, and steering functions. Tools requiring hydraulic operation must utilize the side-mounted hydraulic tank and high-strength steel tubing circuits.
All 2CX LOADER assemblies by section
Every catalogued assembly group for the Jcb 2CX LOADER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-5-12 Shovel Side Tip Rh, Direct Mount 2cx Mk3, 1950mm (6'4")Wide,Twin Shovel Ram
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***83 | Ram | 1 |
A1-2-50 Shovel Clam, 1850mm (6'0") Wide, Direct Mount
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-5-11 Shovel Side Tip Rh, Direct Mount, 1950mm (6'4")Wide
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***07 | Adapter | 2 |
| 61***00 | Hose | 1 |
A1-3-11 Shovel Gp 0.7cu.M, 2000mm (6'5") Wide, Quickhitch Mount
| 13***01 | Nut | 14 |
| 33***95 | Toeplate, Weld-In | 1 |
| 33***02 | Shovel, Gp | 1 |
A1-5-1 Shovel Side Tip Rh, Direct Mount, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***14 | Toeplate, 1850mm Wide | 1 |
A1-3-6 Shovel Gp 0.6cu.M, 1850mm (6'0") Wide, Quickhitch Mount
| 13***01 | Nut | 14 |
| 33***86 | Toeplate, Weld-In | 1 |
| 33***01 | Shovel, Gp | 1 |
A1-3-10 Shovel Gp 0.7cu.M, 2000mm (6'5") Wide, Direct Mount
| 13***01 | Nut | 14 |
| 33***95 | Toeplate, Weld-In | 1 |
| 33***90 | Shovel, Gp 0.7cu M | 1 |
A1-3-20 Shovel Gp, 1950mm (6'4") Wide, Quickhitch Mount
| 13***01 | Nut | 14 |
| 14***93 | Toeplate, 1950mm | 1 |
| 52***00 | Shovel, G.P. 1950mm Wide, Quickhitch Mount | 1 |
A1-3-5 Shovel Gp 0.6cu.M, 1850mm (6'0") Wide, Direct Mount
| 13***01 | Nut | 14 |
| 33***86 | Toeplate, Weld-In | 1 |
| 33***54 | Shovel, Gp 0.6 Cu.M, 1850mm Wide | 1 |
A1-2-40 Shovel Clam, 1850mm (6'0") Wide, Quickhitch Mount
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
A1-4-10 Shovel Side Tip Lh, Direct Mount, 1950mm (6'4")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***15 | Toeplate, 1950mm Wide | 1 |
A1-5-20 Shovel Side Tip Rh, Quickhitch Mount, 1850mm(6'-0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A1-2-30 Shovel Clam 0.6cu.M, 2000mm (6'5") Wide, Quickhitch Mount
| 12***01 | Bush | 4 |
| 12***07 | Clamshovel, Assembly | 1 |
| 12***19 | Clamshovel, Assembly | 1 |
A1-4-20 Shovel Side Tip Lh, Quickhitch Mount, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A1-4-2 Shovel Side Tip Lh, Direct Mount 2cx Mk3, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***82 | Toeplate, Cutting Edge 1850 mm | 1 |
A1-2-5 Shovel Clam 0.6cu.M, 1850mm (6'0") Wide, Direct Mount
| 12***01 | Bush | 4 |
| 12***42 | Clamshovel, Assembly,1850mm | 1 |
| 12***35 | Clamshovel, Assembly As Supplied | 1 |
A1-3-31 Shovel Gp, 1372mm (4'5") Wide, Quickhitch Mount
| 33***83 | Toeplate, Weld-In | 1 |
| 33***03 | Shovel, Gp 1372mm Wide, Qh Mount | 1 |
A1-6-15 Toeplate, Bolt On, 1950mm (6'4") Wide
| 13***1Z | Nut | 7 |
| 14***17 | Toeplate, 1950mm, 7 Holes | 1 |
| 14***2Z | Washer | 7 |
A1-6-10 Toeplate, Bolt On, 2000mm (6'5") Wide, 305mm Centres
| 13***1Z | Nut | 7 |
| 14***2Z | Washer | 7 |
| 33***63 | Toeplate, 2000mm | 1 |
A1-4-12 Shovel Side Tip Lh, Direct Mount 2cx Mk3, 1950mm (6'4")Wide,Twin Shovel Ram
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***83 | Ram | 1 |
A1-3-42 Shovel Gp 0.6cu.M, 2000mm (6'5") Wide, Direct Mount
| 13***01 | Nut | 14 |
| 33***83 | Toeplate | 1 |
| 33***78 | Shovel, Gp 2000mm Wide, Direct Mount | 1 |
A1-4-11 Shovel Side Tip Lh, Direct Mount, 1950mm (6'4")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A1-3-30 Shovel Gp, 1372mm (4'5") Wide, Direct Mount Twin Shovel Ram
| 33***83 | Toeplate, Weld-In | 1 |
| 33***53 | Shovel, Gp 0.6 Cu M Hd, 1372mm Wide | 1 |
A1-2-20 Shovel Clam 0.6cu.M, 1850mm (6'0") Wide, Qh Mount,
| 12***01 | Bush | 4 |
| 12***03 | Clamshovel, Assembly | 1 |
| 12***18 | Clamshovel, Assembly Abi | 1 |
A1-3-40 Shovel Gp, 1372mm (4'5") Wide, Direct Mount
| 14***76 | Toeplate | 1 |
| 14***77 | Sidecutter | 2 |
| 52***00 | Shovel, G.P. 1372mm Wide, Direct Mount | 1 |
A1-4-1 Shovel Side Tip Lh, Direct Mount, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***14 | Toeplate, 1850mm Wide | 1 |
A1-2-41 Shovel Clam 0.65cu.M, 2000mm (6'5") Wide, Quickhitch Mount
| 12***01 | Bush | 4 |
| 12***03 | Clamshovel, Assembly | 1 |
| 12***11 | Clamshovel, Assembly,2000mm, Quickhitch Mounted | 1 |
A1-2-10 Shovel Clam 0.6cu.M, 2000mm (6'5") Wide, Direct Mount
| 12***01 | Bush | 4 |
| 12***51 | Clamshovel, Assembly,2000mm | 1 |
| 13***9Z | Bolt, M8 X 35mm | 2 |
A1-6-1 Toeplate, Bolt On, 1850mm (6'0") Wide, 279.5mm Centres
| 13***1Z | Nut | 7 |
| 14***04 | Toeplate, 1850mm | 1 |
| 14***2Z | Washer | 7 |
A1-5-2 Shovel Side Tip Rh, Direct Mount 2cx Mk3, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***82 | Toeplate, Cutting Edge 1850 mm | 1 |
A1-1-1 Guard, Tooth
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***00 | Guard, Tooth, 1850mm | 1 |
A1-5-10 Shovel Side Tip Rh, Direct Mount, 1950mm (6'4")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***15 | Toeplate, 1950mm Wide | 1 |
A1-3-7 Shovel Gp, 1850mm (6'0") Wide, Quickhitch Mount
| 13***01 | Nut | 12 |
| 14***72 | Toeplate, 1850mm | 1 |
| 52***00 | Shovel, G.P. 1850mm Wide, Quickhitch Mount | 1 |
A1-3-32 Shovel Gp, 1372mm (4'5") Wide, Quickhitch Mount
| 14***76 | Toeplate | 1 |
| 14***77 | Sidecutter | 2 |
| 52***00 | Shovel, G.P. 1372mm Wide, Quickhitch Mount | 1 |
A1-3-41 Shovel Gp, 1850mm (6'0") Wide, Direct Mount
| 13***01 | Nut | 12 |
| 14***72 | Toeplate, 1850mm | 1 |
| 52***00 | Shovel, G.P. 1850mm Wide, Direct Mount | 1 |
A2-2-1 Bucket, Narrow, 230mm (9")
| 13***01 | Nut | 4 |
| 53***52 | Toeplate, 230mm (9") | 1 |
| 53***54 | Sidecutter, Right Hand | 1 |
A2-4-1 Bucket Standard
| 13***01 | Nut | 10 |
| 14***30 | Toeplate, 300mm | 1 |
| 14***31 | Toeplate, 350mm | 1 |
A2-5-1 Buckets, High Capacity, Deep Profile
| 98***01 | Tooth, Tip-Forged | 0 |
| 98***03 | Pin, Flex | 0 |
| 98***03 | Toeplate, 24" | 1 |
A2-1-1 Bucket Grading, 1200mm (4') Wide
| 13***1Z | Nut | 5 |
| 14***1Z | Washer, Spring | 5 |
| 53***01 | Toeplate, Weld On | 1 |
A3-13-1 Quickhitch, Excavator
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
A3-15-1 Shovel Adaptor Kit, Loader Arms
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***3Z | Nut, Lock, M10 | 2 |
A3-7-1 Earth Drill, Attachments, Excavator Mounted
| 13***4Z | Bolt | 3 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
A3-8-1 Fork Frames & Forks, Industrial
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 33***08 | Frame, Fork | 1 |
A3-12-2 Lower Links, Claw Type Category 2
| 14***15 | Ball, Lower Link | 2 |
| 14***00 | Link, Claw Assembly, L.H. Lower | 1 |
| 14***00 | Link, Claw Assembly, R.H.Lower | 1 |
A3-18-1 Tilt And Pitch, Control Hydraulic
A3-12-1 Lower Links, Ball Type Category 1
| 14***99 | Bush, Top Link; See Note 1. Fit Bush Item 1 To Pitch Control Ram Or Turnbuckle When Using Category 1 Type Power Links, Bush, Top Link | 1 |
| 14***00 | Arm, Lift, Right Hand | 1 |
| 14***00 | Arm, Lift, Left Hand | 1 |
A3-6-1 Earth Drill, Excavator Mounted
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, M16 | 10 |
A3-8-2 Fork Frames & Forks, Industrial
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 52***00 | Frame, Fork | 1 |
A3-16-1 Shovel Restraint
| 13***3Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***29 | Retainer, Shovel | 2 |
A3-2-1 Drawbar, 3 Point Hitch
| 13***2Z | Bolt, M16 X 120 | 2 |
| 13***1Z | Bolt, M24x110; Replaces 60***21 San11383, S/S Cancelled San 13642 (1315/ Wrong Grade) | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-14-10 Quickhitch, Loader, Mk Iii Attachments, (128/11309)
| 12***09 | Hitch, Assembly | 1 |
| 13***1Z | Screw | 2 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 4 |
A3-14-21 Quickhitch, Loader, Mk Ii Attachments, Twin Shovel Ram (128/12547)
| 12***06 | Bush, Steel | 2 |
| 12***47 | Hitch, Assembly, Excl.Italian M/Cs | 1 |
| 12***21 | Hitch, Assembly, Italian M/Cs Only | 1 |
A3-1-1 Bracket, Bucket Stowage
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***00 | Pin, Pivot | 1 |
| 14***00 | Bracket, Hanger | 1 |
A3-13-2 Quickhitch, Excavator
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
A3-17-1 Tilt And Pitch, Control Manual
| 14***49 | Rod, Eye End, L.H.Thread | 2 |
| 14***51 | Tube, Centre, Top Link | 1 |
| 14***52 | Bar, Tommy | 2 |
A3-20-1 Weight Tray Assembly, Rear
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-11-1 Hitch Rear, Jcb 3 Point
| 12***02 | Bush | 2 |
| 12***22 | Bush, Steel | 2 |
| 13***9Z | Setscrew, M8x35 | 3 |
A3-14-22 Quickhitch, Loader, Mk Ii Attachments, (128/12547)
| 12***06 | Bush, Steel | 2 |
| 12***47 | Hitch, Assembly, Excl.Italian M/Cs | 1 |
| 12***21 | Hitch, Assembly, Italian M/Cs Only | 1 |
B Bodywork, Cab, Loader End
B1-19-1 Top Link Retainer, 3 Point Hitch
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***96 | Top, Link, Retainer | 2 |
B1-11-3 Mountings, Hydraulic Valve, Loader
| 13***0Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
| 82***49 | Nut, Rivet M10 Open End, For 6 To 8.5mm Plate | 3 |
B1-13-5 Mountings, Number Plate, Rearframe Mounted
| 12***81 | Bracket, Number Plate | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 2 |
B1-11-1 Mountings, Hydraulic Valve, 3 Point Hitch
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***10 | Screw, Cap | 2 |
B1-2-1 Bonnet, Sidepanels, Front Grille
| 12***55 | Handle | 1 |
| 12***52 | Strut, Gas, Assembly | 1 |
| 13***3Z | Screw, M8 X 16 | 4 |
B1-9-1 Frame, Rear, Stabilisers & Wearpads
| 12***14 | Pad, Lower Wear, Colour Black | 2 |
| 12***50 | Pad, Assembly Wear, Stabiliser Leg | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
B1-11-2 Mountings, Hydraulic Valve, Excavator
| 12***94 | Pin, Pivot, Stabiliser | 1 |
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***0Z | Capscrew | 3 |
B1-14-1 Restraints, Loader And Excavator, Uk
| 14***63 | Strap, Retaining, Loader End | 1 |
| 14***64 | Strap, Retaining, Excavator End | 1 |
B1-7-1 Fenders, Front 18" Tyres
| 12***09 | Cap, Nut M8; Replaces 69***72 | 0 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt | 4 |
B1-9-2 Frame, Rear, Hose Guides
| 12***92 | Tube, Wear, Nylon | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B1-16-2 Street Pads, Standard
| 13***4Z | Bolt, M12 X 60mm | 3 |
| 13***3Z | Nut, M12 | 3 |
| 14***9Z | Washer | 3 |
B1-4-15 Chassis, Excavator, Sideshift 2000mm Wide
| 12***23 | Adhesive, Washer | 1 |
| 12***45 | Chassis, Sideshift,78" Wide | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-17-1 Tank, Diesel, Including Battery Box
| 10***01 | Gasket | 1 |
| 12***19 | Tap, Diesel | 1 |
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
B1-5-3 Counterweight, Rear, Airmaster, Additional 275kg
| 13***8Z | Bolt | 2 |
| 13***1Z | Bolt, M24 X 220mm | 2 |
| 13***3Z | Nut | 4 |
B1-4-10 Chassis, Excavator, Sideshift 1850mm Wide
| 12***23 | Adhesive, Washer | 1 |
| 12***73 | Chassis, Sideshift,72"Wide | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-18-1 Tank, Hydraulic
| 12***55 | Cap, Hydraulic Filler, Non Lockable; Replaced By Mss Use The Following Parts 123/0, 4930 + 70***01 Key. See San05966 | 1 |
| 12***17 | Cover, Plate | 1 |
| 12***53 | Gauge, Sight | 1 |
B1-13-1 Mountings, Rear Lights, Loader
| 13***7Z | Bolt | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***08 | Bracket, Light Mounting Rh | 1 |
B1-4-1 Chassis, Airmaster
| 12***23 | Adhesive, Washer | 1 |
| 12***77 | Chassis, Airmaster | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-13-2 Mountings, Rear Lights, Excavator, Sideshift
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-13-6 Mountings, Wheel Chock
| 13***5Z | Bolt | 8 |
| 13***2Z | Bolt, M24x50 | 2 |
| 13***5Z | Bolt | 2 |
B1-16-1 Street Pads, Hydra Shuh Option
| 13***4Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***75 | Pad, Pad; Optional For Most Countries. These Street Pads Are Only Suitable For The Feet As Shown. (Germany Mainly) | 2 |
B1-20-1 Tool Mounting Plate
| 12***86 | Rack, Tool | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B1-3-1 Bracket, Coupler Mounting, 3 Point Hitch
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 33***50 | Bracket | 1 |
B1-5-1 Counterweight, Rear, Airmaster
| 13***0Z | Bolt | 2 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
B1-15-1 Soundproofing, Replaced By B1-15-2
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
B1-15-2 Soundproofing
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 33***26 | Panel, Soundproofing | 1 |
B1-13-7 Mountings, Front Lights, Extension Bracket, Italian Machines Only
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
B1-8-1 Fenders, Rear
| 13***3Z | Screw, M6x16 | 12 |
| 14***1Z | Washer | 12 |
| 14***6Z | Washer, Spring | 12 |
B1-4-25 Chassis, Loader
| 12***23 | Adhesive, Washer | 1 |
| 12***81 | Chassis, Loader | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-4-30 Chassis, Utility
| 12***23 | Adhesive, Washer | 1 |
| 12***82 | Chassis, Utility | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-1-1 Bonnet, Release
| 12***43 | Buffer | 1 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***2Z | Nut, M8 | 2 |
B1-4-35 Chassis, Utility
| 12***23 | Adhesive, Washer | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***5Z | Bolt, M24 X 300mm | 4 |
B1-13-4 Mountings, Rear Fog, Side Shift Excavators
| 13***0Z | Setscrew, M5x10mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 2 |
B1-3-2 Bracket, Hold Down
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***3Z | Nut, M12 | 6 |
| 14***9Z | Washer | 6 |
B1-13-8 Mountings, Rear Lights, Airmaster
| 12***47 | Spacer; Replaced By 12***56 | 2 |
| 12***05 | Bracket | 4 |
| 13***8Z | Screw, M8x30 | 4 |
B1-12-1 Mountings, Number Plate, Roof Mounted
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
B1-5-2 Counterweight, Rear, Loader
| 13***0Z | Bolt, M10 X 100 | 4 |
| 13***5Z | Bolt | 2 |
| 13***1Z | Bolt | 2 |
B2-18-2 Seat, Low Back, Suspension, Pvc & Fabric, Silver Control Knobs
| 12***33 | Seat, Low Back,Vinyl, Assembly | 1 |
| 12***34 | Seat, Low Back,Fabric, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-2-1 Cab Door
| 12***05 | Bolt, Closing | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***29 | Grommet | 1 |
B2-11-1 Glazing, Cab
| 33***05 | Glass, Rear Window, Laminated | 1 |
| 82***24 | Windscreen, Green Tinted, Laminated | 1 |
| 82***28 | Glass, Left Hand Rear Side, Green Tinted | 1 |
B2-10-1 Floormat, Bulkhead,Side Mat
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 4 |
| 33***93 | Floormat | 1 |
B2-9-3 Covers, Vandal Resistant, 3 Point Hitch
| 12***21 | Padlock | 1 |
| 12***39 | Catch | 1 |
| 14***25 | Plate, Spacer | 1 |
B2-3-1 Cab Door Stay
| 12***74 | Stay, Left Hand Door | 1 |
| 12***76 | Stop, Door Stay | 2 |
| 12***77 | Pivot, Door Stay | 2 |
B2-21-1 Window, Side, Opening
| 11***22 | Handle | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
B2-8-3 Consoles, Colour Graphite Grey
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***31 | Vent, Air Register | 1 |
| 13***8Z | Bolt | 6 |
B2-19-1 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 33***61 | Bracket, Mounting,Sun Visor | 1 |
| 82***54 | Washer, Plain | 1 |
B2-9-2 Covers, Vandal Resistant
| 12***86 | Catch, Vandal Cover | 1 |
| 12***91 | Washer, Nylon | 2 |
| 12***97 | Spacer | 1 |
B2-8-1 Consoles, Colour Graphite Grey
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***31 | Vent, Air Register | 1 |
| 12***96 | Panel, Switch | 1 |
B2-17-1 Stowage Box, Cab,Canopy
| 13***5Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 14***6Z | Washer, M6 | 3 |
B2-6-1 Canopy Shell, Abi
| 12***76 | Canopy, Assembly,Unglazed, Abi | 1 |
| 14***3Z | Screw | 2 |
| 33***28 | Cover, Inspection,Bulkhead | 1 |
B2-16-1 Cab Mountings
| 13***3Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
B2-13-1 Glazing, Direct, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-4-1 Cab Shell, Abi
| 12***75 | Cab, Assembly,Unglazed, Abi | 1 |
| 14***3Z | Screw | 2 |
| 33***28 | Cover, Inspection,Bulkhead | 1 |
B2-8-2 Consoles, Colour Graphite Grey
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***31 | Vent, Air Register | 1 |
| 12***47 | Plate, Switch | 1 |
B2-1-1 Cab Assembly
| 12***47 | Spacer | 2 |
| 12***91 | Washer, Nylon | 4 |
| 12***39 | Roof, Cab,Usa, Yellow | 1 |
B2-15-1 Seat Belt, Inertia
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 14***4Z | Washer | 2 |
B2-14-1 Mirror, External & Interior
| 12***68 | Arm, Right Hand Mirror | 1 |
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 2 |
B2-10-2 Floormat, Bulkhead,Side Mat
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 14***03 | Screw | 4 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 4 |
B2-5-1 Canopy Assembly
| 12***47 | Spacer | 2 |
| 12***39 | Roof, Cab,Usa, Yellow | 1 |
| 12***32 | Roof, Cab,Usa, Black | 1 |
B2-18-1 Seat, High Back, Suspension, Pvc & Fabric, Silver Control Knobs
| 12***35 | Seat, High Back,Vinyl, Assembly | 1 |
| 12***36 | Seat, High Back,Fabric, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-20-1 Window, Rear, Opening
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B2-12-1 Glazing, Canopy
| 12***52 | Strip, Cosmetic Glazing | 1 |
| 82***24 | Windscreen, Green Tinted, Laminated | 1 |
| 82***69 | Glass, Front Quarter Light, Left Hand Toughened | 1 |
B3-3-1 Safety Strut, Loader Arms, 70x40 Lift Ram
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
| 12***44 | Strap | 1 |
B3-4-1 Travel Lock, Loader Arms
| 12***02 | Stop | 2 |
| 12***44 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
B3-3-5 Safety Strut, Loader Arms, 70x50 Lift Ram
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
| 12***44 | Strap | 1 |
B3-2-1 Links, Loader Arm
| 12***13 | Bush, Spring | 2 |
| 12***15 | Bush | 2 |
| 12***23 | Bush | 6 |
B3-3-2 Safety Strut, Shovel Ram
| 12***00 | Strap | 1 |
| 12***02 | Stop | 2 |
| 14***00 | Strut, Travel, 654mm Long | 1 |
B3-1-1 Arms, Loader
| 12***23 | Bush | 2 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B4-2-1 Dipper 10', Fixed
| 12***38 | Bush | 2 |
| 12***00 | Dipper, Assembly | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
B4-1-2 Boom 12', Fixed And Extending, Excavator End
| 12***87 | Boom, Assembly | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 33***79 | Plug, Blanking 25mm Dia | 2 |
B4-2-4 Dipper 12', Extending
| 12***38 | Bush | 2 |
| 12***89 | Pad, Top Wear | 4 |
| 12***56 | Spacer, Steel | 8 |
B4-6-2 Pivot Pins, Fixed Excavator End, 10' & 12'
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt | 3 |
| 13***9Z | Bolt, M10x90mm | 3 |
B4-10-1 Tipping Link, With Lifting Shackle
| 12***07 | Bush | 2 |
| 12***38 | Bush | 1 |
| 14***00 | Link, Tipping,With Shackle | 1 |
B4-11-1 Tipping Lever
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***02 | Lever, Tipping | 2 |
B4-1-1 Boom 10', Fixed And Extending, Excavator End
| 12***99 | Boom, Assembly | 1 |
| 14***02 | Nipple, Grease, 1/4" Bsp 90deg. | 1 |
| 83***64 | Bush, Bronze | 2 |
B4-2-2 Dipper 12', Fixed
| 12***38 | Bush | 2 |
| 12***88 | Dipper, Assembly | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
B4-3-1 Kingpost Carriage, Sideshift
| 12***42 | Kingpost, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***4Z | Bolt, M10x60 | 2 |
B4-4-1 Lock, Boom
| 12***52 | Joint, Ball End | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
B4-8-1 Safety Strut, Germany Travel
| 12***00 | Strap | 1 |
| 12***02 | Stop | 2 |
| 12***60 | Chain, Security | 1 |
B4-6-1 Pivot Pins, Extending Excavator, 10' & 12'
| 13***7Z | Bolt | 3 |
| 13***9Z | Bolt, M10x90mm | 5 |
| 13***2Z | Nut, Lock | 2 |
B4-2-3 Dipper 10', Extending
| 12***38 | Bush | 2 |
| 12***07 | Plate, Spreader; Replaced By 33***94, See San 13691 | 4 |
| 12***89 | Pad, Top Wear | 4 |
B4-5-1 Lock, Slew
| 12***43 | Spacer | 1 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***3Z | Nut, M12 | 1 |
B4-9-1 Tipping Link, Basic
| 12***07 | Bush | 2 |
| 12***38 | Bush | 1 |
| 14***00 | Link, Tipping | 1 |
B5-7-2 Decals, Supplementary, Utility
| 14***94 | Disc, Decal | 1 |
| 81***54 | Decal, Warning,Moving Parts | 2 |
| 81***32 | Label, Power Take-Off, Warning | 1 |
B5-5-1 Decals, Machine Identity
| 13***1Z | Nut | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 3 |
B5-7-3 Decals, Supplementary, German Homologation
| 70***00 | Reflector, Red | 2 |
| 81***01 | Label, No Passengers, German | 1 |
| 81***43 | Label, Warning | 1 |
B5-5-2 Decals, Machine Identity
| 13***1Z | Nut | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 3 |
B5-3-1 Decals, Control, Utility
| 81***52 | Label, Controls | 2 |
| 81***20 | Label, Power Take-Off Lever | 1 |
B5-6-21 Label, Safety
| 12***29 | G.A., Safety Labels Usa | 1 |
| 33***07 | Label, Fan Guard-Warning, Ansi | 1 |
| 33***09 | Decal, Safe Load, Ansi | 1 |
B5-2-2 Decals, Control, Excavator, Jcb + Pattern, Black & Silver Knobs
| 24***04 | Seal | 0 |
| 33***44 | Label, Hydraclamp Control | 1 |
| 81***77 | Decal, Breaker | 1 |
B5-8-1 Fire Extinguisher, 2.5kg
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
| 82***68 | Rivet, Nut | 2 |
B5-2-3 Decals, Control, Excavator, Iso + Pattern, Black & Silver Knobs
| 24***04 | Seal | 0 |
| 33***44 | Label, Hydraclamp Control | 2 |
| 81***77 | Decal, Breaker | 1 |
B5-9-1 Paint
| 42***01 | Thinners, 1 Litre, 2-Pack | 0 |
| 42***40 | Paint, Gloss, 0.5 Litre, Two Pack Yellow | 0 |
| 42***43 | Paint, Gloss, 5 Litre, Two Pack Yellow | 0 |
B5-7-1 Decals, Supplementary, Airmaster
| 33***46 | Label, Compressor Caution | 1 |
| 81***52 | Label, Drain Daily | 1 |
| 81***54 | Decal, Warning,Moving Parts | 3 |
B5-6-2 Decals, Non Language, Symbols
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***87 | Decal, Tie Down (Chain) | 4 |
B5-10-1 Tool Kit
| 12***01 | Pin | 1 |
| 14***58 | Key | 1 |
| 27***00 | Bag, Tool | 1 |
B5-7-6 Decals, Supplementary, Austrian Homologation
| 13***5Z | Bolt | 4 |
| 14***26 | Link, Travel | 1 |
| 14***00 | Plate, Front Number Wa | 1 |
B5-1-1 Decals, Control, Loader, Black & Silver Knobs
| 81***71 | Decal, Loader Lever, With Float, Reset | 1 |
| 81***72 | Label, Loader Auxiliary, Clamshovel | 1 |
B5-6-11 Label, Warning
| 12***00 | G.A., Safety Labels | 1 |
| 33***08 | Decal, Warning-Fan Blades, Remove Key From Ign. | 1 |
| 33***01 | Decal, Safe Load, Iso | 1 |
B5-2-1 Decals, Control, Excavator, Jcb X Pattern, Black & Silver Knobs
| 24***04 | Seal | 0 |
| 33***44 | Label, Hydraclamp Control | 1 |
| 81***77 | Decal, Breaker | 1 |
B5-11-1 Labels, Load Charts
| 33***29 | Label, Lift Chart, Non En474 | 1 |
| 33***80 | Label, Lift Chart, 12' Fix | 1 |
| 33***92 | Label, Lift Chart, 10' Fix | 1 |
B5-4-2 Decals, Language, Common
| 81***80 | Label, Press. Cooling | 1 |
| 81***84 | Label, Warning, Boom Lock | 1 |
| 81***91 | Label, Warning, Servicing | 2 |
B5-4-1 Decals, Language, Common
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***24 | Label, Craning, Finnish | 2 |
| 81***37 | Label, Hydraulic Oil Only | 1 |
B5-0-11 Labels, Buy British
| 81***03 | Label, Buy British, 46 X 60mm | 2 |
B5-7-5 Decals, Supplementary, Swedish Homologation
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***07 | Plate, Reflector Mounting | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B5-6-1 Decals, Non Language, Symbols
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***87 | Decal, Tie Down (Chain) | 4 |
B5-7-4 Decals, Supplementary, Italian Homologation
| 12***99 | Plate, Hazard Warning | 3 |
| 25***03 | Ring, Key | 1 |
| 70***16 | Switch, 3 Position, 12v | 1 |
B5-5-3 Decals, Machine Identity
| 13***01 | Nut | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 3 |
B7-1-2 Circuit, Air/Hydraulic
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
B7-2-1 Compressor, Assembly
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***7Z | Screw, M6 X 25mm Long | 34 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B7-8-1 Oil Cooler
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B7-7-2 Hitch, Tow 3.5t Capacity, Sales Special
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
B7-7-1 Hitch, Tow 3.5t Capacity
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 14***9Z | Washer | 4 |
B7-12-1 Suction Unloader
| 14***10 | Gasket | 1 |
| 14***00 | Valve, Unloader Assembly | 1 |
| 99***00 | Kit, Seal/Repair | 1 |
B7-11-1 Speed Control
| 13***1Z | Nut | 4 |
| 14***13 | Cylinder, Speed Control | 1 |
| 14***9Z | Washer | 6 |
B7-9-1 Receiver, Air/Oil
| 13***1Z | Bolt, M10 X 45mm | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 14***18 | Dipstick, Assembly | 1 |
B7-5-1 Filter, Airmaster
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
B7-6-1 Hitch, Recovery, Manual
| 13***6Z | Bolt, M20 X 70 | 2 |
| 14***2Z | Washer, M20 | 2 |
| 15***00 | Pin | 1 |
B7-4-1 Fan & Fan Cowl
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***20 | Bracket, Mounting | 2 |
| 14***00 | Fan, Cooling, 18", 10 Blades | 1 |
B7-13-1 Valve, Blow Down
| 13***1Z | Nut | 6 |
| 14***11 | Valve, Blowdown | 1 |
| 14***9Z | Washer | 6 |
B7-3-1 Compressor, Unit
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***5Z | Bolt | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
B7-1-1 Circuit, Air/Hydraulic, Also Refer To Ti 2/501
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
B7-10-1 Speed Control, Installation
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
C Electrics-Machine, Cab & Engine
C1-17-2 Light, Rear, Number Plate, Rearframe Mounted
| 70***00 | Light, Number Plate | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
| 82***44 | Tie, Cable, 200mm Long | 2 |
C1-1-2 Alarm, Reverse, Loaders
| 33***03 | Harness, Reverse Alarm | 1 |
| 71***00 | Alarm, Reverse | 1 |
| 72***72 | Harness, Reverse Alarm | 1 |
C1-19-1 Shovel Reset, Installation
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***2Z | Nut, Thin M20 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-1-1 Alarm, Reverse, Excavators
| 33***03 | Harness, Reverse Alarm | 1 |
| 71***00 | Alarm, Reverse | 1 |
| 72***72 | Harness, Reverse Alarm | 1 |
C1-8-1 Light, Toothguard Mounted
| 12***00 | Clamp | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***7Z | Bolt | 4 |
C1-2-1 Battery
| 12***59 | Clip | 1 |
| 12***97 | Bolt, Swing, Link Mounting | 1 |
| 13***4Z | Bolt, M6 X 60 | 2 |
C1-6-5 Harnesses, Air Conditioning
| 26***18 | Housing, Binary Switch | 1 |
| 70***26 | Switch, Binary | 1 |
| 70***31 | Actuator, Aircon Switch, Soft Touch | 1 |
C1-10-1 Light, Front, Driving Lh Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***54 | Light, Head Assembly, Left Hand Dip | 2 |
C1-40-1 Boom, Load Sense
| 33***50 | Harness, Boom Link, 3000mm Long | 1 |
| 33***95 | Actuator, Switch, Boom Overload | 1 |
| 33***15 | Transducer, Pressure, 180 Bar, Red | 1 |
C1-6-6 Harnesses, Rear Light, Excavator Mounted German Only
| 72***44 | Harness, Rear Lights | 1 |
| 72***45 | Harness, Extension, Rear Lights | 1 |
C1-6-1 Harnesses, Airmaster, Machine
| 12***47 | Clip, Cable | 5 |
| 12***47 | Cover, Harness, Floor | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
C1-6-2 Harnesses, Excavator, Machine
| 12***47 | Clip, Cable | 5 |
| 12***47 | Cover, Harness, Floor | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
C1-5-4 Harness, Trailer Electrics
| 13***3Z | Nut | 3 |
| 13***8Z | Bolt | 3 |
| 24***15 | Grommet | 1 |
C1-15-2 Light, Rear, Driving, Roof Mounted
| 13***1Z | Nut, M5-8 | 4 |
| 14***7Z | Washer | 4 |
| 24***12 | Grommet, Panel Hole Dia 29mm, Panel Thk 2.8-3.5mm | 2 |
C1-5-6 Harness, Hydraulic Tools, Circuit (Htc)
| 70***66 | Insert, Switch Htc | 1 |
| 70***87 | Insert, Switch Htc | 1 |
| 70***05 | Switch, Spst | 1 |
C1-6-3 Harnesses, Loader & Utility, Machine
| 12***47 | Clip, Cable | 5 |
| 12***47 | Cover, Harness, Floor | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
C1-7-1 Horn, Front, Single Tone
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-28-1 Drop-Down Alarm, Sideshift Stabiliser, Mandatory For E.U.
| 33***52 | Switch, Proximity | 2 |
| 72***98 | Link, Low Leg Warning Switch Cap | 2 |
C1-6-4 Harnesses, Smooth Ride System, Srs
| 70***42 | Cover, Srs Switch, Soft Touch | 1 |
| 70***00 | Switch, 12v | 1 |
| 82***44 | Tie, Cable, 200mm Long | 3 |
C1-5-1 Harness, Cab/Canopy Roof
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***15 | Grommet | 1 |
C1-5-8 Harness, 3 Point Hitch, Pto
| 72***21 | Harness | 1 |
C1-15-3 Light, Rear, Driving, Loader
| 13***2Z | Bolt, M8x50 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***08 | Bracket, Light Mounting Rh | 1 |
C1-11-1 Light, Front, Driving Rh Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***55 | Light, Head Assembly, Right Hand Dip | 2 |
C1-9-1 Light, Beacon, Hazard Warning, Amber
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
C1-13-1 Light, Front, Driving Indicator
| 12***69 | Gasket, Left Hand Indicator | 1 |
| 12***70 | Gasket, Right Hand Idicator | 1 |
| 14***7Z | Washer | 4 |
C1-5-5 Harness, Shovel Reset
| 27***06 | Tie, Cable 385mm Long | 2 |
| 70***35 | Cover, Return To Dig Switch, Soft Touch | 1 |
| 70***00 | Switch, 12v | 1 |
C1-7-2 Horn, Rear
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-12-1 Light, Front, Driving Rh Dip, White With Side Repeat
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***56 | Light, Head Assembly, Right Hand | 1 |
C1-2-2 Battery & Isolator, Option
| 12***59 | Clip | 1 |
| 12***97 | Bolt, Swing, Link Mounting | 1 |
| 13***8Z | Screw, M8x30 | 3 |
C1-5-9 Harness, Rear Work Lights, Airmaster
| 72***34 | Harness, Double Wire | 1 |
C1-15-1 Light, Rear, Driving, Excavator Sideshift
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
C1-16-1 Light, Rear Fog
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 14***5Z | Washer, Spring, M5 | 2 |
| 70***00 | Light, Fog | 1 |
C1-17-1 Light, Rear, Number Plate, Roof Mounted
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 2 |
| 72***67 | Harness, Number Plate Lights | 1 |
C1-5-2 Harness, Cab/Canopy Roof
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***15 | Grommet | 1 |
C1-18-1 Light, Rear, Working, Cab Roof Mounted
| 12***05 | Bracket | 4 |
| 12***70 | Grommet, (1 Hole) | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 0 |
C1-14-1 Light, Front, Working, Cab Mounted
| 14***07 | Screw | 4 |
| 70***03 | Spring | 2 |
| 70***00 | Light, Front Working | 2 |
C1-5-7 Harness, Trailer Electrics
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
C1-5-3 Harness, Steer Mode Selection, 2/4ws
| 70***57 | Switch, 2ws Mode | 1 |
| 72***49 | Harness, Steermode, No Crab | 1 |
| 81***54 | Label, 2/4ws Mode | 1 |
C2-4-1 Alternator, 12volt - 95amp
| 13***8Z | Screw, Star Drive, M10 X 30 | 1 |
| 13***2Z | Bolt, Star Drive, M10 X 120 | 1 |
| 32***60 | Alternator, 12v-95amp | 1 |
C2-2-1 Engine Shut-Off, Solenoid Link, & Electrical Fastenings
| 12***95 | Clip, Harness Support | 2 |
| 12***47 | Clip, Cable | 2 |
| 12***53 | Spacer | 2 |
C2-6-1 Engine Immobiliser, 12.Volt
| 12***25 | G.A, Engine Immobiliser, Scout | 1 |
| 32***93 | Spring, Immobiliser | 1 |
| 32***94 | Spacer, Immobiliser | 1 |
C2-5-2 Grid Heater Relay, Installation, Turbo
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
| 12***65 | G.A, Grid Heater, Turbo | 1 |
C2-3-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***22 | Motor, Starter 12v | 1 |
| 32***52 | Motor, Starter | 1 |
C2-7-2 Engine Block Heater, 240v
| 32***53 | Washer, Copper Sealing | 1 |
| 32***59 | Element, Engine Block Heater, 230v | 1 |
| 32***60 | Kit-Block Heater, Engine, 230v | 1 |
C2-1-1 Switches & Senders
| 17***02 | Seal, Ring | 1 |
| 32***38 | Switch, Engine Oil Pressure | 1 |
| 32***57 | Seal, Bonded | 1 |
C2-5-1 Grid Heater Relay, Installation, Naturally Aspirated
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
| 12***67 | I.A, Grid Heater N/Asp, 2cx Scout | 1 |
C3-9-1 Switch, Column - Black
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
| 70***92 | Switch, Column, Manual | 1 |
C3-8-1 Radio Installation
| 14***07 | Screw | 8 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 1 |
| 33***86 | Console, Speaker; Superseded By 33***90 See San 20728 | 1 |
C3-31-21 Immobiliser, Installation, Cab, Key Operated
| 12***19 | G.A., Immobiliaser | 1 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***01 | Washer | 2 |
C3-7-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-13-1 Wash/Wipe Motor, Rear Screen
| 33***31 | Motor, Wiper, 90deg | 1 |
| 34***17 | Cover, Wiper Motor | 1 |
| 71***00 | Arm | 1 |
C3-1-1 Air Conditioning, Assembly Abi
| 13***5Z | Bolt, M5 X 20mm Long | 26 |
| 13***8Z | Bolt | 1 |
| 13***3Z | Nut | 4 |
C3-41-11 Livelink
| 12***47 | G.A., Livelink, Row | 1 |
| 12***76 | G.A., Livelink, N America | 1 |
| 13***3D | Nut, M6 Lock | 3 |
C3-14-1 Wash/Wipe Motor, Front Screen, Single Speed
| 71***00 | Arm, Wiper | 1 |
| 71***00 | Blade, Wiper | 1 |
| 71***00 | Wiper, Motor (Front) | 1 |
C3-11-2 Warning Lights, Cluster And Gauges, Front Console
| 70***20 | Cap | 3 |
| 70***85 | Holder, Bulb | 3 |
| 70***98 | Gauge, Fuel Level | 1 |
C3-12-1 Warning Lights, And Gauges, Side Console
| 70***20 | Cap | 3 |
| 70***50 | Light, Panel Led, Eng/Trans Pressure | 1 |
| 70***51 | Light, Panel Led, Eng/Trans Temp | 1 |
C3-5-1 Fuse Box & Relays, Excavator & Loader
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***31 | Plate, Fuse Mounting | 1 |
C3-12-2 Warning Lights, Side Console
| 70***49 | Light, Panel Led, Air Filter | 1 |
| 70***50 | Light, Panel Led, Eng/Trans Pressure | 1 |
| 70***51 | Light, Panel Led, Eng/Trans Temp | 1 |
C3-6-2 Heater, Installation, With Air Conditioning
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***3Z | Nut | 6 |
| 13***4Z | Screw | 6 |
C3-11-3 Warning Lights, Cluster And Gauges, Front Console
| 70***20 | Cap | 3 |
| 70***85 | Holder, Bulb | 3 |
| 70***98 | Gauge, Fuel Level | 1 |
C3-10-1 Switches, Electrical, Front And Side Consoles
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***21 | Actuator, Hazard Switch | 1 |
| 70***24 | Actuator, Head Lights Switch | 1 |
C3-11-5 Warning Lights, Front Console
| 70***13 | Bulb, 12v 1.7w | 12 |
| 70***88 | Cluster, Warning Lamp | 1 |
C3-16-1 Immobiliser, Installation
| 70***03 | Key, Immobiliser | 1 |
| 71***58 | Unit, Immobiliser, Cab Dash Fitted; When Nla See Tsdb 469 | 1 |
| 71***74 | Receptacle, Dallas Key Assembly | 1 |
C3-6-1 Heater, Installation, Without Air Conditioning
| 12***50 | Adapter, Bulkhead | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***3Z | Nut | 6 |
C3-15-2 Wash/Wipe, Washer Bottle, Front & Rear Screens
| 12***75 | Screen Washer Bottle, Cab | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 33***04 | Tube, Split, Conduit | 1 |
C3-11-1 Warning Lights, Front Console
| 70***13 | Bulb, 12v 1.7w | 12 |
| 70***00 | Cluster, Warning Light | 1 |
C3-15-1 Wash/Wipe, Washer Bottle, Front & Rear Screens
| 25***03 | Jet, Screen Washer | 1 |
| 33***04 | Tube, Split, Conduit | 1 |
| 33***68 | Bottle, Screenwash | 1 |
C3-10-2 Switches, Electrical, Front And Side Consoles
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***91 | Insert, Switch,Rear Horn | 1 |
| 70***42 | Cover, Srs Switch, Soft Touch | 1 |
C3-10-3 Switches, Electrical, Front And Side Consoles
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***21 | Actuator, Hazard Switch | 1 |
| 70***24 | Actuator, Head Lights Switch | 1 |
C3-4-1 Face Level Fan, Installation
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 14***6Z | Washer, Spring | 4 |
C3-2-1 Air Conditioning, Installation
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 1 |
C4-7-1 Packard, Connectors, Flyleads
| 72***11 | Connector, Terminal | 1 |
| 72***12 | Terminal, Socket | 1 |
| 72***07 | Terminal, Pin | 1 |
C4-4-1 Econoseal, Connectors, Fly Leads
| 72***15 | Plug, Dummy, Econoseal | 1 |
| 72***08 | Housing, 2 Way, Econoseal | 1 |
| 72***09 | Retainer, 2way Socket, Econoseal | 1 |
C4-9-1 Tools, All Make Connectors
| 89***49 | Tool, Crimp | 1 |
| 89***50 | Heater, Assembly, Butane | 1 |
| 89***69 | Tool, Pin/Receptcal, Removal (Power) Itt | 1 |
C4-1-1 Blanking Plugs, All Makes
| 21***03 | Plug, 3 Way Male Blanking, Connector | 1 |
| 71***00 | Plug, Junior Timer Sealed, Socket Ho. Amp 2-Way | 1 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 1 |
C4-3-30 Deutsch, Bulkhead, Hdp Range, Round, 9,16,23 & 31 Way
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 54 |
| 72***44 | Socket, Solid,Size 16, Wire Size 1.0-2.0mm | 54 |
| 72***45 | Socket, Solid,Size 12, Wire Size 2.0-3.0mm | 16 |
C4-8-1 Sumitomo, Connectors, Flyleads
| 72***01 | Connector, Female | 1 |
| 72***02 | Connector, Female | 2 |
| 72***01 | Connector, Male | 1 |
C4-3-40 Deutsch, Bulkhead, Hdp Range, Round, 18,19 & 29 Way
| 72***25 | Terminal, Crimp 5.0 To 8.0mm | 2 |
| 72***42 | Socket, Solid,Size 20, Wire Size 0.5-1.0mm | 6 |
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 73 |
C4-3-20 Deutsch, Minature Terminal, Dtm Range
| 72***42 | Socket, Solid,Size 20, Wire Size 0.5-1.0mm | 35 |
| 72***47 | Pin, Solid,Size 20, Wire Size .05-1.0mm | 35 |
| 72***52 | Plug, Seal, Cavity Size 20 | 0 |
C4-5-1 Itt/Cannon, Connectors, Fly Leads
| 72***03 | Pin, Female, 0.5-1.5mm, Signal | 1 |
| 72***04 | Pin, Female, 1.5-2.0mm, Signal | 1 |
| 72***05 | Pin, Female, 2.5-4.0mm, Power | 1 |
C4-3-10 Deutsch, Standard Terminal, Dt Range
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 35 |
| 72***44 | Socket, Solid,Size 16, Wire Size 1.0-2.0mm | 35 |
| 72***48 | Pin, Solid, Size 16, Wire Size 0.5-1.0mm | 35 |
C4-3-1 Deutsch, Multi-Way Block, Drb Range
| 72***42 | Socket, Solid,Size 20, Wire Size 0.5-1.0mm | 72 |
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 24 |
| 72***44 | Socket, Solid,Size 16, Wire Size 1.0-2.0mm | 24 |
C4-2-1 Conversion Harness'S
| 71***00 | Harness, 2-Way Link 40mm Long, Packard-Amp J/Timer | 1 |
| 72***63 | Harness, 2-Way Link 40mm Long, Deutsch-Amp/Jnrtimer; Deutsch Pin Hsg-Amp J/Timer Hsg. Normal Polarity, Harness, 2-Way Link 40mm Long, Deutsch-Amp/Jnrtimer | 1 |
| 72***65 | Harness, 2-Way Link 40mm Long, Deutsch-Sumitomo | 1 |
C4-6-1 Miscellanous, Connectors, Flyleads, J/Timer, Amp, Hirschmann, Pozilok, Merit
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C4-0-1 Information Page, Connectors, Electrical
D Controls-Machine, Engine & Steering
D1-7-1 Controls, Loader Valve, 2 & 3 Spool
| 12***02 | Joint, Ball, M8 Right Hand | 3 |
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 1 |
D1-3-1 Control Knob, Loader Valve, Black And Silver
| 12***59 | Ring, Tolerance | 1 |
| 12***48 | Knob, Assembly | 1 |
| 70***00 | Switch, Micro | 1 |
D1-5-1 Controls, Excavator
| 11***16 | Joint, Universal | 2 |
| 12***59 | Ring, Tolerance | 2 |
| 12***94 | Pin, Pivot, Stabiliser | 1 |
D1-9-1 Lever Lock, Excavator Valve, Italian Build Only
| 12***81 | Bar, Lever Lock | 1 |
| 12***16 | Plate, Lock | 1 |
| 12***53 | Lever, Excavator, Left Hand Control | 1 |
D1-2-1 Control, Parking Brake
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***50 | Lever, Parkbrake | 1 |
| 13***2Z | Bolt | 2 |
D1-1-1 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***96 | Gaiter, Gear Lever | 1 |
| 12***34 | Knob, Assembly | 1 |
D1-9-2 Lever Lock, Loader Valve
| 24***08 | Grommet | 1 |
| 24***12 | Grommet | 1 |
| 33***05 | Bar, Locking | 1 |
D1-4-1 Control, Foot, Excavator Auxiliary
| 12***84 | Seal, Auxiliary Pedal | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***80 | Fastener, Fir Tree | 0 |
D1-6-1 Controls, Hydraclamp
| 13***1Z | Nut | 1 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 3 |
| 14***19 | Knob | 1 |
D1-1-2 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***96 | Gaiter, Gear Lever | 1 |
| 12***34 | Knob, Assembly | 1 |
D2-31-1 Controls, Throttle & Stop
| 12***59 | Bracket, Reaction Wa | 1 |
| 12***66 | Engine, Mount Throttle | 1 |
| 12***69 | Assembly, Pivot Arm | 1 |
D2-21-1 Controls, Throttle & Stop
| 12***59 | Bracket, Reaction Wa | 1 |
| 12***66 | Engine, Mount Throttle | 1 |
| 12***69 | Assembly, Pivot Arm | 1 |
D2-11-1 Controls, Throttle & Stop
| 12***57 | Pivot, Cable | 1 |
| 12***72 | G.A, Throttle Pedal, 2cx Mkiii | 0 |
| 12***37 | Arm, Throttle Pivot | 1 |
D2-1-1 Controls, Throttle & Stop
| 12***57 | Pivot, Cable | 1 |
| 12***31 | G.A, Pedal Throttle, 2cx Mkiii | 1 |
| 12***02 | G.A, Mount Hand Throttle, 2cxmkiii | 1 |
D3-1-1 Steering Column, Fixed
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***52 | Plate, Retainer | 1 |
E Hydraulics & Air Including, Steering
E1-11-1 Circuit, Hydraulic Tools-Htc, Roadbreaker
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-13-20 Circuit, Stabiliser, 2000mm Wide R/Frame, With Optional Lockout Valves
| 13***2Z | Bolt | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
| 16***63 | Adaptor | 4 |
E1-16-10 Hose Clamps, Transmission Cooling
| 12***05 | Bracket, Hose Clip | 1 |
| 12***59 | Bracket, Hose Clip | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
E1-7-1 Circuit, Hydraclamp
| 14***11 | Seal, Bonded | 2 |
| 24***03 | O Ring | 4 |
| 61***00 | Hose | 2 |
E1-13-21 Circuit, Stabiliser, Sideshift,6'6"Frame, With Hose Burst Protection Italian Build
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt | 4 |
| 14***3Z | Washer, Medium | 4 |
E1-13-1 Circuit, Stabiliser, 1850mm Wide, Rearframe
| 13***2Z | Bolt | 4 |
| 61***00 | Hose, 1/4bspx1270 | 4 |
| 82***34 | Clamp, 16mm/16mm Holes, 26mm High | 4 |
E1-3-2 Circuit, Auxiliary, Extending Dipper 10', With Breaker
| 13***9Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
E1-9-3 Circuit, Neutral, Utility
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
E1-4-2 Circuit, Dipper & Bucket, (Iso & Jcb) Extending Excavator End 12'
| 13***9Z | Screw, M10x35mm | 8 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
E1-14-5 Circuit, Steering, 4 Wheel Steer, With Anticavitation Valve
| 12***15 | Bracket, Mounting | 1 |
| 12***92 | Pipe, Steer, Wa | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-2-1 Circuit, Auxiliary, Breaker, 10' & 12' Fixed Dippers
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***8Z | Bolt, M10 X 30 | 6 |
| 13***4Z | Bolt, M10x60 | 2 |
E1-8-10 Circuit, Loader & Shovel
| 13***9Z | Setscrew, M8x35 | 8 |
| 13***4Z | Bolt | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 4 |
E1-5-3 Circuit, Dipper & Bucket, Iso & Jcb, 12' Excavator End Fixed
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 4 |
E1-14-4 Circuit, Steering, 2/4ws Option, With Anticavitation Valve
| 12***15 | Bracket, Mounting | 1 |
| 12***92 | Pipe, Steer, Wa | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
E1-11-2 Circuit, Hydraulic Tools, Roadbreaker
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-1-2 Circuit, Boom (Iso & Jcb), 2000mm Wide Rearframe
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 22***17 | Clip, Worm Drive | 1 |
| 33***78 | Pipe, Wa; Superseded By 33***46 See San 25324 | 1 |
E1-4-1 Circuit, Dipper & Bucket, (Iso & Jcb) Extending Excavator End 10'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
E1-13-11 Circuit, Stabiliser, Sideshift,6'0"Frame, With Hose Burst Protection Italian Build
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt | 4 |
| 14***3Z | Washer, Medium | 4 |
E1-3-1 Circuit, Auxiliary, Extending Dipper 10'
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-6-2 Circuit, Hitch Auxiliaries
| 45***60 | Coupling, Qrc 3/8"Bsp Female | 4 |
| 47***08 | Cap, Qrc Dust, Green | 4 |
| 61***00 | Hose | 2 |
E1-14-3 Circuit, Steering, 4 Wheel Steer, With Anticavitation Valve
| 12***15 | Bracket, Mounting | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 5 |
E1-6-3 Circuit, Hitch, Tilt,Pitch,Lift Rams
| 13***9Z | Bolt, M8 X 35mm | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 61***00 | Hose | 4 |
E1-8-30 Circuit, Loader Auxiliary
| 13***1Z | Bolt, M10 X 45mm | 7 |
| 13***3Z | Nut, Lock, M10 | 7 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 7 |
E1-14-1 Circuit, Steering, 4 Wheel Steer, Without Anticavitation Valve
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***2Z | Nut | 1 |
E1-3-22 Circuit, Auxiliary, Extending Dipper 12', With Breaker
| 13***9Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
E1-50-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-9-2 Circuit, Neutral, Airmaster & Loader
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
E1-9-1 Circuit, Neutral, Excavators
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
E1-5-1 Circuit, Dipper & Bucket, Iso & Jcb,10' Excavator End Fixed 1850mm
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 4 |
E1-16-2 Circuit, Transmission Cooling, With Pto
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-1-1 Circuit, Boom (Iso & Jcb), 1850mm Wide Rearframe
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 22***17 | Clip, Worm Drive | 1 |
| 33***78 | Pipe, Wa; Superseded By 33***46 See San 25324 | 1 |
E1-8-40 Circuit, Hbcv, Loader Lift Rams, Non Srs
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***3Z | Bolt, M8 X 55 | 2 |
E1-14-2 Circuit, Steering, 2/4ws Option, Without Anticavitation Valve
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***12 | Capscrew | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E1-13-10 Circuit, Stabiliser, 1850mm Wide R/Frame, With Optional Lockout Valves
| 13***2Z | Bolt | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
| 16***63 | Adaptor | 4 |
E1-13-2 Circuit, Stabiliser, 2000mm Wide, Rearframe
| 13***2Z | Bolt | 4 |
| 61***00 | Hose, 1/4"Bsp 1370mm | 4 |
| 61***00 | Hose | 4 |
E1-15-1 Circuit, Suspension, Smooth Ride System
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
E1-3-12 Circuit, Auxiliary, Extending Dipper 12'
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Nut | 1 |
E1-12-1 Circuit, Slew, 1850mm Wide, Rearframe
| 24***06 | O Ring | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose | 1 |
E1-15-2 Circuit, Suspension, Smooth Ride System
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
E1-6-1 Circuit, Hitch-3 Point, Valve Block To Bulkhead
| 13***2Z | Nut | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 14***4Z | Washer, Star | 4 |
E1-12-2 Circuit, Slew, 2000mm Wide, Rearframe
| 24***06 | O Ring | 1 |
| 61***00 | Hose, 1/4bsp X 1680 | 1 |
| 61***00 | Hose, 1/4" 1120mm Long | 1 |
E1-16-1 Circuit, Transmission Cooling
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E2-1-1 Pump,Single, Main Hydraulic, Jcb Engine
| 13***8Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
E3-10-1 Valve,Aux Relief, Iso Pattern, Excavator
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***30 | Kit-Seal | 1 |
E3-9-40 Valve,Loader, Control 3 Spool, Shovel Reset/Aux Detent & Shovel Regen
| 13***1Z | Nut | 1 |
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
E3-7-1 Valve,Excavator, Iso Control, 7 Spool
| 13***0Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
| 16***53 | Adaptor; O Ring 24***06 | 3 |
E3-14-1 Valve,Steering, Assembly
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 24***03 | O Ring | 1 |
| 24***06 | O Ring | 1 |
E3-13-1 Valve,Section, Loader Aux, Mechanical Detent
| 25***51 | Valve, Section, Mech.2 Position Detent | 1 |
| 25***52 | Spool, End | 1 |
| 25***53 | Sleeve | 1 |
E3-12-2 Valve,Section, Hitch Pitch,Tilt,Aux, Utility
| 25***55 | Valve, Section | 2 |
| 25***57 | Valve, Section | 1 |
| 25***01 | Screw | 2 |
E3-13-6 Valve Section, Shovel, Reset Electric With Regen
| 25***83 | Sleeve, Magnetic | 1 |
| 25***71 | Valve, Section With Regen, Electric Reset | 1 |
| 25***01 | Screw | 2 |
E3-10-4 Valve,Aux Relief, Utility
| 25***75 | Kit, Seal | 1 |
| 25***05 | Valve, Relief | 2 |
E3-1-1 Cover, Inlet & Outlet, Excavator Valve
| 25***12 | O Ring, Interface, Valve Sections | 2 |
| 25***16 | Seal | 1 |
| 25***17 | Plug | 1 |
E3-2-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
| 32***01 | Element, Hydraulic Filter, 5 Micron 254 Long | 1 |
E3-13-3 Valve,Section, Loader Lift, Mechanical Detent-Float
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 2 |
| 25***78 | Valve, Section, Mechanical Detent | 1 |
E3-11-1 Valve,Section, Excavator,Components
| 25***59 | Valve, Section | 1 |
| 25***24 | Seat | 2 |
| 25***01 | Screw | 2 |
E3-9-41 Valve,Loader, Control 3 Spool, Shovel Reset/Aux Detent & Shovel Regen
| 13***1Z | Nut | 1 |
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
E3-13-5 Valve Section, Shovel, No Detent/Reset With Regen
| 25***70 | Valve, Section,With Regen, No Detent | 1 |
| 25***01 | Screw | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-10-2 Valve,Aux Relief, Jcb Pattern, Excavator
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***30 | Kit-Seal | 1 |
E3-7-2 Valve,Excavator, Jcb Control, 7 Spool
| 13***0Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
E3-13-11 Valve,Section, Loader Aux, Mechanical Detent
| 25***52 | Spool, End | 1 |
| 25***54 | Cap, Detent | 1 |
| 25***01 | Screw | 2 |
E3-12-1 Valve,Section, Hitch Lift, Utility
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 1 |
| 25***56 | Valve Section | 1 |
E3-16-1 Valve, Steering Mode, With No Crab
| 13***20 | Capscrew | 2 |
| 14***7Z | Washer, Spring | 2 |
| 25***67 | Valve, Steer Mode, No Crab; Oil Control. For Vickers See Page E3-16-1. Check Part Number And Manufactuer Of Valve Fitted To Machine Before Ordering Parts, Valve, Steer Mode, No Crab | 1 |
E3-9-10 Valve,Loader, Control 2 Spool, With Shovel Regen
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
| 25***59 | Valve, 2 Spool | 1 |
E3-17-1 Valve, Solenoid
| 25***82 | Solenoid, Coil Only | 1 |
| 25***53 | Valve, Solenoid | 1 |
| 92***84 | Valve Solenoid, (No Coil) | 1 |
E3-3-1 Lubricants & Filters, Jcb 444 Engines
| 32***01 | Element, Air Filter, Main | 1 |
| 32***02 | Element, Air Filter, Safety | 1 |
| 32***00 | Element, Suction | 1 |
E3-10-3 Valve,Aux Relief, Loader
| 25***97 | Valve, Main Relief, 3500psi; Shovel Circuit Without Regen. For Use With Single Shovel Ram System Only, Valve, Main Relief, 3500psi | 1 |
| 25***15 | Valve, Relief,Auxiliary, 2750psi; Shovel Circuit With Regen. For Use With Twin Shovel Ram System Only, Valve, Relief,Auxiliary, 2750psi | 1 |
| 25***21 | Valve, Relief, Auxiliary, 2000 Psi; Shovel Circuit With Regen. For Use With Twin Shovel Ram System Only | 1 |
E3-8-1 Valve,Hitch, Control,Utility
| 13***10 | Screw, Cap | 1 |
| 13***12 | Capscrew | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-13-2 Valve,Section, Loader Aux & Shovel, No Detent/Reset
| 25***01 | Screw | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-9-30 Valve,Loader, Control 3 Spool, Shovel Reset (Electric) With Regen
| 13***1Z | Nut | 1 |
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
E3-10-5 Valve,Main Relief, Loader
| 25***02 | Valve, Relief Mrv, 3300psi | 1 |
| 25***32 | Kit-Repair | 0 |
E3-9-20 Valve,Loader, Control 3 Spool, With Shovel Regen
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
| 25***60 | Valve, 3 Spool | 1 |
E4-6-20 Ram, Dipper, 12'0" Excavator End, With Hbcv
| 13***3Z | Bolt, M8 X 55 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 22***18 | Clip, Jubilee, 130-152mm | 1 |
E4-4-2 Ram, Bucket
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-8-2 Ram, Loader Lift Ram
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 33***42 | Endcap Assembly, 70 X 40 | 1 |
E4-2-21 Ram, Boom, With Hbcv
| 12***52 | Pipe, Boom Ram, Hbcv | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E4-5-1 Ram, Clamshovel, 6 In 1
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***21 | Ram, Clamshovel; Replaced By 99***84, See San 13446 | 1 |
| 55***21 | Cylinder | 1 |
E4-1-1 Hydraclamp
| 13***3Z | Bolt, M24 X 130 | 8 |
| 13***1Z | Nut, M24 | 8 |
| 14***59 | Piston | 4 |
E4-10-1 Ram, Pitch & Tilt, 3 Point Hitch
| 90***00 | Ram, Hydraulic, Pitch | 1 |
| 90***00 | Ram, Hydraulic,Tilt | 1 |
| 90***56 | Rod, Piston | 1 |
E4-2-20 Ram, Boom, With Hbcv
| 12***52 | Pipe, Boom Ram, Hbcv | 1 |
| 33***34 | Bracket | 1 |
| 33***36 | Pipe | 1 |
E4-11-21 Ram, Shovel, With Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-16-2 Ram, Quickhitch
| 33***47 | Cylinder | 1 |
| 53***02 | Cap, End | 1 |
| 53***03 | Piston | 1 |
E4-6-2 Ram, Dipper, 12'0" Excavator End
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***81 | Ram, Dipper, Complete, 90 X 50 | 1 |
| 55***88 | Ram, Dipper, 90 X 50 | 1 |
E4-16-1 Ram, Quickhitch, Shovel
| 53***01 | Cylinder, (1/4 Bsp Ports) | 1 |
| 53***02 | Cap, End | 1 |
| 53***03 | Piston | 1 |
E4-12-1 Ram, Slew/Swing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 22***20 | Circlip | 1 |
| 55***20 | Spacer | 1 |
E4-6-10 Ram, Dipper, 10'0" Excavator End, With Hbcv
| 13***3Z | Bolt, M8 X 55 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 22***18 | Clip, Jubilee, 130-152mm | 1 |
E4-15-1 Ram, Steering, Rear
| 12***52 | Ram, Steer Assembly; As 55***39 But Painted Black | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***39 | Ram, Steer Assembly | 1 |
E4-11-10 Ram, Shovel, Without Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-6-1 Ram, Dipper, 10'0" Excavator End
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
| 55***89 | Ram, Dipper,Complete, 90 X 50 | 1 |
E4-11-11 Ram, Shovel, Without Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-7-1 Ram, Extension, Extending Dipper, 10' & 12'
| 55***63 | Ram, Assembly Dipper | 1 |
| 55***63 | Cylinder | 1 |
| 59***22 | Rod, Piston | 1 |
E4-13-1 Ram, Stabiliser, Sideshift
| 55***46 | Ram, Stabiliser,60x40 | 1 |
| 55***46 | Cylinder | 1 |
| 59***75 | Rod, Piston 40mm Dia | 1 |
E4-11-20 Ram, Shovel, With Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-8-1 Ram, Loader Lift Ram, 70 X 40
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***68 | Ram, Lift, 70x40 | 2 |
E4-8-5 Ram, Lift, Left & Right Hand, 70 X 50
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***57 | Ram, Lift, 70x50 | 2 |
E4-17-1 Ram, Sidetip Shovel
| 33***83 | Ram | 1 |
| 33***15 | Cylinder, Body | 1 |
| 33***16 | Piston Rod | 1 |
E4-4-1 Ram, Bucket
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-2-2 Ram, Boom
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***82 | Ram, Boom, Complete, 90 X 50 | 1 |
| 55***89 | Ram, Boom 90 X 50 | 1 |
E4-14-1 Ram, Steering, Front
| 12***47 | Ram, Steer Assembly; As 55***26 But Painted Black | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***26 | Ram, Steer Assembly | 1 |
E4-9-1 Ram, Lift, 3 Point Hitch
| 12***11 | Bush | 2 |
| 90***00 | Ram, 3 Point Lift, Rear Hitch | 1 |
| 90***58 | Rod, Piston | 1 |
F Axles, Wheels & Transmission
F1-5-2 Differential, Assembly, Maxtrac, 18.6 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
| 44***90 | Differential, Assembly, Complete | 1 |
F1-1-2 Axle Assembly, Front,Maxtrac 18.6 : 1, 20" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-8-1 Axle Pivot Pin, & Greasing, Aws
F1-1-3 Axle Assembly, Front, 15.78 : 1, Maxtrac,18" Wheels,448/58240
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-2-1 Axle Assembly, Front,Lsd 16.2 : 1, 18" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-2-3 Axle Assembly, Front,Lsd 15.78 : 1, 18" Wheels 448/58250
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-1-0 Axle Assembly, Serial No, Identification Information
F1-5-4 Differential, Assembly, Lsd, 18.6 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 44***60 | Differential, Complete | 1 |
F1-5-1 Differential, Assembly, Maxtrac, 16.2 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
| 44***60 | Differential, Assembly | 1 |
F1-7-1 Shaft, Drive
| 91***04 | Shaft, Drive Assembly, Btb320 | 1 |
| 91***05 | Shaft, Drive Assembly | 1 |
| 91***55 | Shaft | 1 |
F1-4-1 Hub & Components, Front Axle
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***21 | Carrier, Planetary Hub, Black | 2 |
F1-6-2 Differential, Components Lsd
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F1-1-1 Axle Assembly, Front,Maxtrac 16.2 : 1, 18" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-5-5 Differential, Assembly, Maxtrac, 15.78 : 1 Ratio, Axle 448/58240
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
| 45***00 | Yoke | 1 |
F1-5-6 Differential, Assembly, Lsd, 15.78 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 45***00 | Yoke | 1 |
F1-2-2 Axle Assembly, Front,Lsd 18.6 : 1, 20" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-3-1 Knuckle, Steering, Front Axle
| 13***9Z | Bolt | 16 |
| 45***02 | Carrier, Annulus Ring | 2 |
| 45***03 | Plate, Retaining | 2 |
F1-5-3 Differential, Assembly, Lsd, 16.2 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 44***50 | Differential, Complete | 1 |
F1-6-1 Differential, Components, Maxtrac
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Case | 1 |
F2-2-3 Axle Assembly, Rear,Lsd 15.78 : 1, 18" Wheels 448/58260
F2-1-2 Axle Assembly, Rear,Maxtrac 18.6 : 1, 20" Wheels
F2-2-2 Axle Assembly, Rear,Lsd 18.6 : 1, 20" Wheels
F2-7-1 Shaft, Drive
F2-6-2 Differential, Components Lsd
F2-5-6 Drivehead Assembly, Lsd 15.78 : 1
F2-5-5 Drivehead Assembly, Maxtrac 15.78 : 1, 448/58230 Axle
F2-1-1 Axle Assembly, Rear,Maxtrac 16.2 : 1, 18" Wheels
F2-5-1 Drivehead Assembly, Maxtrac 16.2 : 1
F2-1-0 Axle Assembly, Serial No, Identification Information
F2-5-2 Drivehead Assembly, Maxtrac 18.6 : 1
F2-5-4 Drivehead Assembly, Lsd 18.6 : 1
F2-2-1 Axle Assembly, Rear,Lsd 16.2 : 1, 18" Wheels
F2-3-1 Knuckle, Steering, Rear Axle
F2-1-3 Axle Assembly, Rear,Maxtrac 15.78 : 1, 18" Wheels
F2-5-3 Drivehead Assembly, Lsd 16.2 : 1
F2-6-1 Differential, Components, Maxtrac
F2-4-1 Hub & Components, Rear Axle
F3-1-5 Propshafts, Transmission, Airmaster
F3-2-14 Wheels & Tyres, 405/70 R20, Michelin Traction Xm27
F3-2-5 Wheels & Tyres, 12.5x18x10, Firestone Ind Traction Stl
F3-2-15 Wheels & Tyres, 340/65 R18, Goodyear Industrial Fs24 Radial
F3-2-7 Wheels & Tyres, 12.5x20x10, Goodyear Ind Mpt
F3-1-10 Propshafts, Transmission, Utility
F3-2-4 Wheels & Tyres, 12.5/80x18x10, Goodyear Industrial Sgl
F3-2-2 Wheels & Tyres, 12.5/80x18x10, Continental Imp As Farmer
F3-1-1 Propshafts, Transmission
F3-2-10 Wheels & Tyres, 15.5/55 R18, Dunlop Traction Mpt
F3-2-8 Wheels & Tyres, 14.5/80x18, Continental Imp E7
F3-2-16 Wheels & Tyres, 400/70 R20, Michelin Traction Xmcl
F3-2-12 Wheels & Tyres, 335/80 R18, Michelin Traction Xm27
F3-2-11 Wheels & Tyres, 340/65 R18, Michelin Traction Xp27
F3-2-9 Wheels & Tyres, 14.5x20x10, Continental Ind E58 Mpt
F3-2-13 Wheels & Tyres, 340/80 R18, Goodyear Ind It530
F3-2-1 Wheels & Tyres, 12.0/12.5x18x12, Firestone Ind Haul Champion
F3-2-6 Wheels & Tyres, 12.5x20x10, Firestone Ind Traction Stl
F3-2-3 Wheels & Tyres, 12.5/80x18x10, Goodyear Traction Sgi
F5-6-2 Transmission, Gear Components, Output, 30kph
F5-6-4 Transmission, Gear Components, Pto Transfer Box
F5-5-3 Transmission, Driveshafts, Internal, 30kph
F5-4-1 Transmission, Dipstick
| 12***43 | Bracket, Mounting,Filler Tube | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 15***00 | Nut, Sealastic | 1 |
F5-1-1 Clutch, Pto
F5-1-4 Clutch, Reverser Unit
F5-5-1 Transmission, Driveshafts,Internal, 20kph Non Pto
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-3-6 Transmission Assy, Jcb Syncro Shuttle, 30kph 75hp
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-3-1 Transmission Assy, Jcb Syncro Shuttle, 20kph
F5-6-1 Transmission, Gear Components, Output, 20kph
F5-2-2 Torque Converter, Drive Plate
F5-3-5 Transmission Assy, Jcb Syncro Shuttle, 30kph, Pto
| 13***9Z | Screw, M10x35mm | 31 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-3-3 Transmission Assy, Jcb Syncro Shuttle, 30kph 67hp
F5-3-4 Transmission Assy, Jcb Syncro Shuttle, 30kph, Airmaster
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***9Z | Bolt, M10x90mm | 7 |
F5-1-2 Clutch, Reverser Unit
F5-1-3 Clutch, Reverser Unit
F5-5-4 Transmission, Driveshafts,Internal, 30kph, Pto
F5-1-10 Clutch, Pto Feed Pipe
F5-5-2 Transmission, Driveshafts,Internal, 20kph, Pto
F5-8-1 Transmission, Mounting
F5-2-3 Torque Converter, Drive Plate, Sales Specials, See Item 1 For S/Nos
F5-3-2 Transmission Assy, Jcb Syncro Shuttle, 20kph, Pto
F5-2-1 Torque Converter, Drive Plate
F5-7-1 Transmission, Gearchange
F5-6-3 Transmission, Gear Components, Pto Engine Driven,20 & 30kph
F5-6-5 Transmission, Gear Components, Pto Output Drive,20 & 30kph
F5-0-5 Mounting, Transmission, To Engine
G Brakes
G1-1-1 Brake,System
G1-3-1 Brake Components, Axle Rear
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***04 | Pin, Brake Back Off | 6 |
G1-1-2 Brake,System
G1-5-1 Brake, Parking, Transmission, 15/920269
| 15***03 | Kit-Pad, Brake Pad | 1 |
| 15***69 | Caliper, Parkbrake, Hayes, Booted | 1 |
| 15***89 | Kit-Bolt, Torx Head | 1 |
G1-4-1 Brake, Pedal, & Mounting
| 12***01 | Plate, Lock | 1 |
| 12***05 | Pin, Pivot, Brake Pedal | 1 |
| 13***3Z | Screw, M6x16 | 1 |
V Jcb444 Engine Installation, Components
V41-1-1 Engine Assembly, 320/40087, 74bhp, See Catalogue 9802/2910
| 12***93 | I.A, Engine N/Ap 75hp, Scout | 1 |
| 12***42 | I.A, Engine Aws 75hp 95a, None Exc. | 1 |
| 32***87 | Engine, Assembly 74bhp-12v, Nat/Asp 11"T/C | 1 |
V42-1-1 Engine Mountings
| 12***78 | G.A, Mounts Engine Aws | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 5 |
| 13***0Z | Bolt, M10 X 40 | 8 |
V43-1-1 Filter, Air
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
V44-2-1 Rain Cap, Installation
| 12***17 | G.A, Sealing Plate, 2cx Mkiii | 1 |
| 12***92 | G.A, Rain Cap, 2cx Scout | 1 |
| 12***01 | I.A, Air Induction, Rain Cap 2cx Scout | 1 |
V44-1-1 Air Induction Hoses
| 12***91 | G.A, Induction Hose | 1 |
| 12***01 | I.A, Air Induction, Rain Cap 2cx Scout | 1 |
| 12***17 | I.A, Air Induction, Pre-Cleaner 2cxscout | 1 |
V44-3-1 Pre-Cleaner, Installation
| 12***17 | G.A, Sealing Plate, 2cx Mkiii | 1 |
| 12***06 | G.A, Pre-Cleaner, 2cx Scout | 1 |
| 12***17 | I.A, Air Induction, Pre-Cleaner 2cxscout | 1 |
V45-2-1 Silencer & Extension
| 02***16 | Nut | 1 |
| 12***70 | G.A, Silencer N/Asp | 1 |
| 12***24 | G.A, Extension Exhaust, 2cx Mkiii | 1 |
V45-1-1 Silencer & Extension
| 02***16 | Nut | 4 |
| 12***81 | G.A, Extension Nat Asp, 2cx Mkiii | 1 |
| 12***79 | G.A, Silencer N/Asp, 2cx | 1 |
V46-1-1 Radiator, Fittings & Mountings
| 12***62 | Washer, Spreader | 6 |
| 12***11 | G.A, Hoses Cooling, 2cx Mkiii | 1 |
| 12***12 | G.A, Anti Recirculation, 2cx Mkiii | 1 |
V46-2-1 Fan Guards
| 12***62 | Washer, Spreader | 6 |
| 12***92 | G.A, Fan Guard, 2cx Scout | 1 |
| 12***82 | Guard, Fan, Left Hand | 1 |
V47-2-1 Combination Cooler, Assembly
| 12***64 | Combination, 4row Rad/9+16 Cooler | 1 |
| 12***23 | I.A, Cooling 0.85 Aws, 2cx Airmaster | 1 |
| 12***24 | G.A, Cooler Airmaster, 2cx | 1 |
V47-1-1 Combination Cooler, Assembly
| 12***65 | Combination Assembly, 4row Rad/9+16 Cooler | 1 |
| 12***86 | G.A, Cooling Pack 2cx, B/Hoe & Utility | 1 |
| 12***07 | I.A, Cooling 0.85, 2cx | 1 |
V48-1-1 Radiator & Hoses
| 12***96 | Tank, Coolant Expansion | 1 |
| 12***87 | G.A, Top Hose, 2cx | 1 |
| 12***88 | G.A, Bottom Hose, 2cx | 1 |
V49-30-1 Cooling Fan & Spacer, C/W Viscous Coupling
| 12***97 | Fan, & Viscous Coupling, Assembly | 1 |
| 12***47 | G.A, Fan Drive 20" | 1 |
| 12***68 | I.A, Fan Vc 2cx 1.16 A | 1 |
V49-20-1 Lower Idler Pulley, Small
| 12***07 | I.A, Cooling 0.85, 2cx | 1 |
| 12***25 | I.A, Fan Dd 2cx 0.85 | 1 |
| 12***31 | I.A, Fan Dd 2cx 1.00 | 1 |
V49-2-1 Front End Drive, Accessory, With Cooling Fan
| 12***07 | I.A, Cooling 0.85, 2cx | 1 |
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***02 | Pulley, 0.85:1 Ratio | 1 |
V49-3-1 Front End Drive, Accessory, With Cooling Fan
| 12***31 | I.A, Fan Dd 2cx 1.00 | 1 |
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***41 | Screw, Pan Head, M8 X 20 | 1 |
V49-4-1 Front End Drive, Accessory, With Cooling Fan & Air Conditioning
| 12***67 | I.A, Fan Dd 2cx 1.00 A | 1 |
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***30 | Pulley, Idler, Long | 1 |
V49-1-1 Cooling Fan & Spacer
| 12***47 | G.A, Fan 20" 2ws | 1 |
| 12***25 | I.A, Fan Dd 2cx 0.85 | 1 |
| 12***31 | I.A, Fan Dd 2cx 1.00 | 1 |
V49-6-2 Front End Drive, Accessory, With Viscous Cooling Fan & Aircon
| 12***64 | I.A, Cooling 1.16 2ws, Scout | 1 |
| 12***70 | I.A, Cooling 1.16 Aws, Scout | 1 |
| 12***92 | I.A, Fan 1.16 2ws D/D | 1 |
V50-1-1 Fuel Pipes, Fuel Tank To Filter
| 12***82 | G.A, Sedimenter 214e/3c, 2cx Scout | 1 |
| 12***32 | G.A, Fuel System, 2cx Scout | 1 |
| 12***27 | G.A, Fuel System, With Ptc 2cx Scout | 1 |
V50-2-1 Fuel Pipes, Fuel Tank To Filter
| 12***65 | G.A, Circuit Diesel | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
V51-4-1 Filter, Fuel Sediment, Cold Climate
| 32***33 | Seal, O'Ring | 1 |
| 32***75 | Element, Fuel Filter, 150micron Rev/Flow | 1 |
V51-2-1 Filter, Fuel Sediment, Cold Climate
| 32***05 | Element, Fuel Sediment/Water, 150 Microns | 1 |
| 32***33 | Seal, O'Ring | 1 |
V51-3-1 Filter, Fuel Sediment
| 12***66 | G.A, Fuel Sedimenter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
V51-1-1 Filter, Fuel Sediment
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
| 32***94 | Element, Fuel Filter | 1 |
V55-1-1 Oil Level Dipstick, & Tube, Standard
| 12***93 | I.A, Engine N/Ap 75hp, Scout | 1 |
| 12***42 | I.A, Engine Aws 75hp 95a, None Exc. | 1 |
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
V55-1-2 Oil Level Dipstick, & Tube, Long
| 12***93 | I.A, Engine N/Ap 75hp, Scout | 1 |
| 12***42 | I.A, Engine Aws 75hp 95a, None Exc. | 1 |
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
V56-1-1 Compressor, Air Conditioning
| 12***67 | I.A, Fan Dd 2cx 1.00 A | 1 |
| 12***68 | I.A, Fan Vc 2cx 1.16 A | 1 |
| 13***0Z | Bolt, Star Drive, M8 X 100mm | 3 |
V57-1-1 Engine Oil Drain
| 12***79 | G.A, Drain Engine Sump, Scout | 1 |
| 25***62 | Plug, Oil Drain | 1 |
| 33***28 | Tube, Oil Sump Drain | 1 |
2CX LOADER serial number reference
The machine identification plate is located on the right-hand side of the loader tower or cab frame. The serial number is also stamped into the chassis frame as a backup if the plate is missing or worn. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 00659599-00659999, 00760001-00764999 | JCB 2CX LOADER backhoe loader |
Frequently asked questions
What engine does the JCB 2CX use?
The JCB 2CX uses a four-cylinder direct injection diesel engine. Early models typically feature a Perkins engine, while later models use a JCB Dieselmax or Kohler unit, producing approximately 51.5 kW (69 hp) to 53.91 kW (72 hp).
What is the operating weight of the JCB 2CX?
The operating weight of the JCB 2CX varies by configuration, ranging from 5,200 kg (11,464 lb) to 6,355 kg (14,010 lb).
What model replaced the JCB 2CX?
The JCB 2CX Plus replaced the standard 2CX model, continuing the compact backhoe loader line with updated features and emissions compliance.
What 2CX LOADER owners discuss
What is the primary powertrain configuration of the JCB 2CX compared to larger JCB backhoe models?
The JCB 2CX utilizes a hydrostatic drive system rather than the Powershift transmissions found in larger JCB backhoe loaders. This configuration provides smooth, stepless travel and high maneuvering precision. The drivetrain is a componentized 4x4x4 system (four-wheel drive, four-wheel steering, four equal-sized tires) with a heavy-duty one-piece mainframe. The transmission is designed specifically for JCB backhoes, featuring synchronized shifting in all gears and powershuttle between forward and reverse. The hydraulic system is an open-center design with a single gear pump supplying oil for the loader, backhoe, and steering functions. A side-mounted hydraulic tank includes a sight glass and a return line filter. The front and rear axles incorporate double reduction, outboard planetary drives and steel drive mechanisms. The braking system consists of hydraulically actuated, dual-line, self-adjusting (compensated), oil-immersed, multi-disc 'Q' brakes. The compressor operates only when the parking brake is applied, with overheat sensors disengaging the drive if oil temperature rises abnormally.
What are the typical engine specifications and known quirks for the JCB 2CX?
The engine is a four-cylinder, direct injection diesel. Older models (circa 1990s) typically used a Perkins engine with approximately 75 HP (53.91 kW net power). Newer versions (2008–2022) were equipped with a JCB by Kohler unit. The engine operates with JCB Dieselmax water pump, spin-on oil and fuel filters, and a water sediment separator prefilter. A full-flow 10-micron filter ensures oil remains free of contaminants. A known operational quirk is the requirement to avoid extended idling; engines should not be allowed to idle for extended periods, such as during warm-up without load, to prevent glazing of the piston cylinder bores and excessive oil consumption. New machines are filled at the factory with JCB 10W/30 Multigrade oil, which must be drained after the first 100 hours of operation. The engine is housed in a fully enclosed compartment.
What are the common hydraulic and drive-related failure modes reported by owners?
A frequent cause of complete loss of drive (machine will not move forward or backward) is a clogged suction strainer or micro screen within the transmission/hydraulic system. This issue is particularly common after periods of inactivity (e.g., four months). Cleaning the strainer and replacing the oil filter and fluid typically restores function. Another reported issue is a loss of power during load-bearing tasks, such as climbing small hills or pushing material, which may indicate hydraulic flow restrictions or pump wear. The open-center hydraulic system relies on the single gear pump; failure here affects all functions simultaneously. Operators should also monitor the hydraulic tank sight glass for proper fluid levels and check the return line filter for contamination.
What electrical and sensor issues are commonly associated with the JCB 2CX?
The electrical system is a 12-volt negative ground setup using wiring and connectors rated to IP69 water ingress standards. A central fuse panel is supplemented by main circuit breakers at the battery positive terminal. Common electrical faults include myriad electronics failures and wiring harness issues. Specific sensor alerts include audible and visual warnings for engine oil pressure, transmission temperature, park brake status, battery charge, air cleaner restriction, and alternator output. The alternator is rated at 72 amps. A slow crank condition may indicate a parasitic draw or a faulty steering valve causing excessive load on the starter circuit. Battery capacity is specified as 550 CCA. The battery location is typically under the front radiator grille. Pre-wiring for radio speakers and beacons is standard.
What are the typical wear patterns and undercarriage/steering maintenance requirements for this machine type?
The JCB 2CX features four equal-sized tires and four-wheel steering. A critical maintenance item is the drive chain tension; loose chains can hammer the motors and other drive components. Proper tension is verified by jacking up the rear wheels and checking for approximately 6.35 mm (1/4 inch) of rotation at the outside of the tire. Steering alignment issues between the front and rear axles are common; resolution may require adjusting a valve in the engine compartment with the steering locked to full position. Loader arm pins and bushings wear over time, requiring replacement with precision pins and bushings to eliminate play. Grease nipples on the top loader arm pins are often positioned such that standard 90-degree grease gun fittings cannot reach them, necessitating specialized tools or angled fittings. Hydraulic cylinder seals (cylinder seals) and high-strength steel tubing/hose protection should be inspected for leaks, as hydraulic leaks are a common fault.
What are the key fluid specifications and capacities for the JCB 2CX?
Fuel tank capacity is 83.2 liters (18.3 UK gallons). Engine oil capacity is 11.1 liters (2.5 UK gallons). Recommended engine oil is JCB 15W/40 Multigrade for temperatures ranging from -10°C to 50°C (14°F to 122°F), or JCB Super Universal Agricultural oil for -15°C to 30°C (5°F to 86°F). JCB 10W/30 is used for initial break-in. The cooling system and hydraulic system capacities are specified in the service manual but exact liter values vary by configuration and are not explicitly listed in the provided summary data. The machine uses JCB-branded fluids verified for use, with equivalent alternatives allowed. The transmission and axle housings require specific JCB lubricants as detailed in the routine maintenance table. Grease points require standard lithium-based greases verified by JCB.
What specific items must be checked when buying a used JCB 2CX?
Verify the machine's serial number (PIN) and engine serial plate, as they are distinct and located on the chassis/loader tower and engine respectively. Check the drive chain tension on the rear axle (6.35 mm / 1/4 inch play). Inspect the hydraulic suction strainer for clogging, which causes loss of drive. Test the steering alignment between front and rear axles. Check for hydraulic leaks around the open-center pump and cylinder seals. Verify the condition of the loader arm pins and bushings for play. Ensure the battery holds 550 CCA and check for parasitic draws causing slow cranking. Confirm the brake system 'Q' brakes are functioning and self-adjusting. Check the IP69-rated wiring connectors for water ingress damage. Verify the engine does not idle excessively to avoid piston glazing. Note that the 2CX is a mid-size machine with an operating weight of approximately 6,000–6,355 kg (13,200–14,010 lb) and 51.5 kW (69–75 HP) depending on the series. Have your dealer verify the exact serial range specifications and fluid capacities.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 2CX LOADER part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.