JCBconstructionbackhoe loader 2cx, 210, 212, midi cx
Jcb 2CX 12
Maintenance schedule, common problems & OEM parts breakdown
The JCB 2CX is a mid-size backhoe loader manufactured from 2006 to 2022, designed for general contracting, utilities, and landscaping. It features a net power engine of 53.91 kW (72 hp) and an operating weight ranging from 6,355 kg (14,010 lb) to 6,200 kg (13,669 lb) depending on configuration. The 2CX succeeded the 1CX platform and was followed by the 3CX series in the broader lineup. Configurations included the standard 2CX, the 2CX L with extended reach, the 2CX Streetmaster with utility-specific attachments, and the 2CX Airmaster variant. The machine offers four-wheel drive, a ROPS/FOPS approved cab, and integrated hydraulic tool circuits.
Across its production life, the 2CX evolved from early Euro Stage IIIA emissions packages to later Stage IV/Tier 4 Final configurations, necessitating changes to fuel injection and exhaust systems. The 2CX-12 designation specifically refers to the 12-foot dipper configuration. The machine remains significant in the used market due to its simple, durable powertrain and accessible maintenance points. Its 500-hour engine oil interval reduces downtime compared to competitors, making it a cost-effective option for utility and municipal fleets. Parts availability remains high due to the large installed base and shared components with the 3CX and 4CX series.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 2CX 12 specifications
Engine
| Model | JCB 2257 |
| Gross Power | 55.3 hp (41.24 kW) |
| Net Power | 51.5 hp (38.4 kW) |
| Displacement | 268.6 cu in (4,401.58 cu cm) |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 14,010.4 lb (6,355 kg) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 16.84 ft (5.13 m) |
| Transport Width | 6.07 ft (1.86 m) |
| Transport Height | 9.85 ft (3.05 m) |
| Wheelbase | 6.53 ft (2.01 m) |
| Ground Clearance | 1.12 ft (0.34 m) |
| Height to Top of Suspended Cab | 8.7 ft (2.65 m) |
Performance
| Travel Speed Forward | 21.3 mph (34.28 km/h) |
| Travel Speed Reverse | 21.3 mph (34.28 km/h) |
| Dig Depth (Standard) | 10 ft (3.05 m) |
| Dig Depth (Extended) | 12.15 ft (3.72 m) |
| Bucket Breakout Force | 7,921 lb (3,599 kg) |
| Lift Capacity at Full Height | 4,844 lb (2,197 kg) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 22 gal (83.27 L) |
| Hydraulic System | 22 gal (83.27 L) |
| Engine Oil | 4 gal (15.14 L) |
| Cooling System | 4.8 gal (18.17 L) |
| Transmission | 4.5 gal (17.03 L) |
| Front Axle | 2.4 gal (9.08 L) |
| Rear Axle | 2.4 gal (9.08 L) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
2CX 12 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 11.1 L (2.5 UK gal) | JCB 15W/40 Multigrade (-10°C to 50°C / 14°F to 122°F) or JCB Super Universal Agricultural (-15°C to 30°C / 5°F to 86°F); new machines shipped with JCB 10W/30 Multigrade |
| Cooling system | 17.5 L (3.8 UK gal) | JCB Coolant (SP 15+ Coolant -38 Organic NF) |
| Fuel tank | 83.2 L (18.3 UK gal) | Diesel Oil |
| Transmission | 11 L (2.4 UK gal) | JCB Special Transmission Fluid (Friction modified oils such as Dexron ATF type MUST NOT be used) |
| Front axle / Final drive | 15.5 L (3.4 UK gal) | JCB Special Gear Oil Plus (Must be suitable for use with oil immersed brakes and limited slip differentials) |
| Rear axle / Final drive | 15.5 L (3.4 UK gal) | JCB Special Gear Oil Plus (Must be suitable for use with oil immersed brakes and limited slip differentials) |
| Hydraulic system and tank | 58 L (12.75 UK gal) | JCB High Performance Hydraulic Oil |
| Grease | N/A | JCB Grease (JCB boom grease or JCB blue grease) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 2CX 12 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 2CX 12 beyond the schedule
Predictive Maintenance & Fluid Analysis
Take baseline oil samples from the engine, hydraulic system, front axle, and rear axle at the 500-hour mark. Compare future samples against this baseline to detect bearing wear or contamination early. Monitor hydraulic oil cleanliness against ISO 4406 17/15/12 standards. Inspect the hydraulic return filter magnet for metallic debris at every 500-hour service. Check coolant silicate levels to prevent separation and sludge formation in the expansion bottle. Use only JCB High Performance Hydraulic Oil or equivalent to ensure anti-wear protection for pumps and valves.
Corrective & Common Repairs
Address turbocharger shaft play and charge cooler boot integrity during the 1000-hour service to prevent boost leaks. Inspect the oil immersed brakes for fade and disc wear, adjusting as necessary. Check the alternator and starter load capacity to avoid electrical failures. Replace the primary and secondary fuel filters to protect common-rail injectors from contamination. Inspect the engine oil cooler for internal cross-contamination between oil and coolant. Verify the integrity of the high-tensile mounting bolts on the loader arm and backhoe structure.
Overhaul & Rebuild Points
Inspect the swing ring bolts for torque and wear on JS-series excavators, though the 2CX uses a wheeled chassis. Check the rear axle planetary drives and outboard reduction gears for wear. Inspect the transmission torque converter and filter for metal shavings. Examine the loader arm and backhoe boom for structural cracks, particularly at high-stress weld points. Check the cylinder rods for scoring and pitting. Replace the hydraulic pump seals if external leaks develop. Inspect the final drive hubs for oil leaks and bearing play.
Seasonal & Environment Servicing
In cold climates, use JCB 15W/40 Multigrade oil rated for -10°C to 50°C. In moderate climates, JCB Super Universal Agricultural oil is suitable for -15°C to 30°C. Use JCB SP 15+ Coolant rated to -38°C for freeze protection. Check the battery CCA rating in winter conditions. Inspect the cab HVAC system for proper heating and cooling performance. Ensure the air cleaner restriction indicator is functioning correctly to prevent dust ingestion in dry environments. Verify the operation of the audible and visual warning systems for engine oil and coolant temperature.
2CX 12 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 320/07057 | Filter, Fuel | Fuel system service | Check fitment → |
| 32/925914 | Filter, Fuel Sediment 30m, Reverse Flow | Fuel system service | Check fitment → |
| 32/925705 | Element, Fuel Sediment/Water, 150 Microns | Fuel system service | Check fitment → |
| 32/925694 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 32/925975 | Element, Fuel Filter, 150micron Rev/Flow | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
2CX 12 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters or failing lift pump | Check fuel filter condition and fuel supply pressure |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring short | Inspect sensor connector and wiring harness for damage |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Verify oil level and test sensor signal |
| P2047 | DEF/AdBlue injector circuit open (SCR system fault) | Open circuit in reductant injector wiring | Inspect injector connector and wiring for damage |
| U0100 | Lost communication with Engine Control Module (ECM) | CAN bus wiring fault or poor ground connection | Check battery voltage and ground straps |
| 101 | Low transmission clutch pressure detected | Transmission fluid issue or pressure sensor fault | Check transmission fluid level and condition |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
2CX 12 attachments & work tools
Loader Buckets
Direct-mount General Purpose (GP) buckets are available in 0.8 cu yd (0.61 m³) and 1.0 cu yd (0.76 m³) sizes. All buckets feature a flat top box section for rigidity and are drilled to accept optional auxiliary cutting edges or teeth.
Loader Couplers
The machine utilizes a Q-Fit coupler system for loader attachments. An optional hydraulic loader quickhitch is available to facilitate rapid switching between the shovel and pallet forks.
Loader Attachments
Compatible tools include pallet forks with a foot truss boom and hydraulic winch, a 7-in-1 bucket (0.8 cu yd / 0.61 m³), and a Q-Fit blank. A sweeper/collector attachment is also listed for this class.
Backhoe Buckets
Standard profile buckets are designed with specific pin positions to maximize tearout and load retention. Heavy-duty options include ribbed buckets with bolt-on teeth and 2-piece tooth variants with weld-on adaptors.
Backhoe Attachments
Specialized tools include ditch maintenance buckets with bolt-on toeplates, tapered ditching buckets, and tilting grading buckets which require a compatible hydraulic service. Extending dippers are also available.
Hydraulic Systems
The system features a gear pump with a power modulation valve to match hydraulic power to digging conditions. It includes an Integrated Hand-Held Tool Circuit (HHTC) for operating hand-held attachments and a single-acting auxiliary circuit.
Engine & Power
The 2CX Airmaster variant is equipped with a 51.5 kW (69 hp) engine. The 2CX 12 FT J model is manufactured from 2006 to 2022 with a weight of 5.592 tons.
Fluid Specifications
Recommended fluids include JCB 15W/40 Multigrade engine oil, JCB Special Transmission Fluid, and JCB Special Gear Oil Plus. The hydraulic system requires JCB High Performance Hydraulic Oil.
All 2CX 12 assemblies by section
Every catalogued assembly group for the Jcb 2CX 12. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-3-10 Shovel Gp 0.7cu.M, 2000mm (6'5") Wide, Direct Mount
| 13***01 | Nut | 14 |
| 33***95 | Toeplate, Weld-In | 1 |
| 33***90 | Shovel, Gp 0.7cu M | 1 |
A1-4-2 Shovel Side Tip Lh, Direct Mount 2cx Mk3, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***82 | Toeplate, Cutting Edge 1850 mm | 1 |
A1-4-10 Shovel Side Tip Lh, Direct Mount, 1950mm (6'4")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***15 | Toeplate, 1950mm Wide | 1 |
A1-3-32 Shovel Gp, 1372mm (4'5") Wide, Quickhitch Mount
| 14***76 | Toeplate | 1 |
| 14***77 | Sidecutter | 2 |
| 52***00 | Shovel, G.P. 1372mm Wide, Quickhitch Mount | 1 |
A1-2-10 Shovel Clam 0.6cu.M, 2000mm (6'5") Wide, Direct Mount
| 12***01 | Bush | 4 |
| 12***51 | Clamshovel, Assembly,2000mm | 1 |
| 13***9Z | Bolt, M8 X 35mm | 2 |
A1-1-1 Guard, Tooth
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***00 | Guard, Tooth, 1850mm | 1 |
A1-3-11 Shovel Gp 0.7cu.M, 2000mm (6'5") Wide, Quickhitch Mount
| 13***01 | Nut | 14 |
| 33***95 | Toeplate, Weld-In | 1 |
| 33***02 | Shovel, Gp | 1 |
A1-5-2 Shovel Side Tip Rh, Direct Mount 2cx Mk3, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***82 | Toeplate, Cutting Edge 1850 mm | 1 |
A1-3-41 Shovel Gp, 1850mm (6'0") Wide, Direct Mount
| 13***01 | Nut | 12 |
| 14***72 | Toeplate, 1850mm | 1 |
| 52***00 | Shovel, G.P. 1850mm Wide, Direct Mount | 1 |
A1-3-7 Shovel Gp, 1850mm (6'0") Wide, Quickhitch Mount
| 13***01 | Nut | 12 |
| 14***72 | Toeplate, 1850mm | 1 |
| 52***00 | Shovel, G.P. 1850mm Wide, Quickhitch Mount | 1 |
A1-5-12 Shovel Side Tip Rh, Direct Mount 2cx Mk3, 1950mm (6'4")Wide,Twin Shovel Ram
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***83 | Ram | 1 |
A1-5-11 Shovel Side Tip Rh, Direct Mount, 1950mm (6'4")Wide
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***07 | Adapter | 2 |
| 61***00 | Hose | 1 |
A1-2-41 Shovel Clam 0.65cu.M, 2000mm (6'5") Wide, Quickhitch Mount
| 12***01 | Bush | 4 |
| 12***03 | Clamshovel, Assembly | 1 |
| 12***11 | Clamshovel, Assembly,2000mm, Quickhitch Mounted | 1 |
A1-4-20 Shovel Side Tip Lh, Quickhitch Mount, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A1-2-30 Shovel Clam 0.6cu.M, 2000mm (6'5") Wide, Quickhitch Mount
| 12***01 | Bush | 4 |
| 12***07 | Clamshovel, Assembly | 1 |
| 12***19 | Clamshovel, Assembly | 1 |
A1-3-30 Shovel Gp, 1372mm (4'5") Wide, Direct Mount Twin Shovel Ram
| 33***83 | Toeplate, Weld-In | 1 |
| 33***53 | Shovel, Gp 0.6 Cu M Hd, 1372mm Wide | 1 |
A1-2-20 Shovel Clam 0.6cu.M, 1850mm (6'0") Wide, Qh Mount,
| 12***01 | Bush | 4 |
| 12***03 | Clamshovel, Assembly | 1 |
| 12***18 | Clamshovel, Assembly Abi | 1 |
A1-3-40 Shovel Gp, 1372mm (4'5") Wide, Direct Mount
| 14***76 | Toeplate | 1 |
| 14***77 | Sidecutter | 2 |
| 52***00 | Shovel, G.P. 1372mm Wide, Direct Mount | 1 |
A1-2-5 Shovel Clam 0.6cu.M, 1850mm (6'0") Wide, Direct Mount
| 12***01 | Bush | 4 |
| 12***42 | Clamshovel, Assembly,1850mm | 1 |
| 12***35 | Clamshovel, Assembly As Supplied | 1 |
A1-4-1 Shovel Side Tip Lh, Direct Mount, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***14 | Toeplate, 1850mm Wide | 1 |
A1-5-1 Shovel Side Tip Rh, Direct Mount, 1850mm (6'0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***14 | Toeplate, 1850mm Wide | 1 |
A1-3-6 Shovel Gp 0.6cu.M, 1850mm (6'0") Wide, Quickhitch Mount
| 13***01 | Nut | 14 |
| 33***86 | Toeplate, Weld-In | 1 |
| 33***01 | Shovel, Gp | 1 |
A1-3-31 Shovel Gp, 1372mm (4'5") Wide, Quickhitch Mount
| 33***83 | Toeplate, Weld-In | 1 |
| 33***03 | Shovel, Gp 1372mm Wide, Qh Mount | 1 |
A1-5-20 Shovel Side Tip Rh, Quickhitch Mount, 1850mm(6'-0")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A1-6-15 Toeplate, Bolt On, 1950mm (6'4") Wide
| 13***1Z | Nut | 7 |
| 14***17 | Toeplate, 1950mm, 7 Holes | 1 |
| 14***2Z | Washer | 7 |
A1-6-1 Toeplate, Bolt On, 1850mm (6'0") Wide, 279.5mm Centres
| 13***1Z | Nut | 7 |
| 14***04 | Toeplate, 1850mm | 1 |
| 14***2Z | Washer | 7 |
A1-3-42 Shovel Gp 0.6cu.M, 2000mm (6'5") Wide, Direct Mount
| 13***01 | Nut | 14 |
| 33***83 | Toeplate | 1 |
| 33***78 | Shovel, Gp 2000mm Wide, Direct Mount | 1 |
A1-4-12 Shovel Side Tip Lh, Direct Mount 2cx Mk3, 1950mm (6'4")Wide,Twin Shovel Ram
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***83 | Ram | 1 |
A1-6-10 Toeplate, Bolt On, 2000mm (6'5") Wide, 305mm Centres
| 13***1Z | Nut | 7 |
| 14***2Z | Washer | 7 |
| 33***63 | Toeplate, 2000mm | 1 |
A1-4-11 Shovel Side Tip Lh, Direct Mount, 1950mm (6'4")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A1-3-20 Shovel Gp, 1950mm (6'4") Wide, Quickhitch Mount
| 13***01 | Nut | 14 |
| 14***93 | Toeplate, 1950mm | 1 |
| 52***00 | Shovel, G.P. 1950mm Wide, Quickhitch Mount | 1 |
A1-3-5 Shovel Gp 0.6cu.M, 1850mm (6'0") Wide, Direct Mount
| 13***01 | Nut | 14 |
| 33***86 | Toeplate, Weld-In | 1 |
| 33***54 | Shovel, Gp 0.6 Cu.M, 1850mm Wide | 1 |
A1-5-10 Shovel Side Tip Rh, Direct Mount, 1950mm (6'4")Wide
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter, Male/Male | 3 |
| 33***15 | Toeplate, 1950mm Wide | 1 |
A1-2-50 Shovel Clam, 1850mm (6'0") Wide, Direct Mount
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-2-40 Shovel Clam, 1850mm (6'0") Wide, Quickhitch Mount
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
A2-4-1 Bucket Standard
| 13***01 | Nut | 10 |
| 14***30 | Toeplate, 300mm | 1 |
| 14***31 | Toeplate, 350mm | 1 |
A2-1-1 Bucket Grading, 1200mm (4') Wide
| 13***1Z | Nut | 5 |
| 14***1Z | Washer, Spring | 5 |
| 53***01 | Toeplate, Weld On | 1 |
A2-2-1 Bucket, Narrow, 230mm (9")
| 13***01 | Nut | 4 |
| 53***52 | Toeplate, 230mm (9") | 1 |
| 53***54 | Sidecutter, Right Hand | 1 |
A2-5-1 Buckets, High Capacity, Deep Profile
| 98***01 | Tooth, Tip-Forged | 0 |
| 98***03 | Pin, Flex | 0 |
| 98***03 | Toeplate, 24" | 1 |
A3-14-22 Quickhitch, Loader, Mk Ii Attachments, (128/12547)
| 12***06 | Bush, Steel | 2 |
| 12***47 | Hitch, Assembly, Excl.Italian M/Cs | 1 |
| 12***21 | Hitch, Assembly, Italian M/Cs Only | 1 |
A3-14-10 Quickhitch, Loader, Mk Iii Attachments, (128/11309)
| 12***09 | Hitch, Assembly | 1 |
| 13***1Z | Screw | 2 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 4 |
A3-18-1 Tilt And Pitch, Control Hydraulic
A3-12-2 Lower Links, Claw Type Category 2
| 14***15 | Ball, Lower Link | 2 |
| 14***00 | Link, Claw Assembly, L.H. Lower | 1 |
| 14***00 | Link, Claw Assembly, R.H.Lower | 1 |
A3-13-1 Quickhitch, Excavator
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
A3-1-1 Bracket, Bucket Stowage
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***00 | Pin, Pivot | 1 |
| 14***00 | Bracket, Hanger | 1 |
A3-7-1 Earth Drill, Attachments, Excavator Mounted
| 13***4Z | Bolt | 3 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
A3-11-1 Hitch Rear, Jcb 3 Point
| 12***02 | Bush | 2 |
| 12***22 | Bush, Steel | 2 |
| 13***9Z | Setscrew, M8x35 | 3 |
A3-17-1 Tilt And Pitch, Control Manual
| 14***49 | Rod, Eye End, L.H.Thread | 2 |
| 14***51 | Tube, Centre, Top Link | 1 |
| 14***52 | Bar, Tommy | 2 |
A3-6-1 Earth Drill, Excavator Mounted
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, M16 | 10 |
A3-8-1 Fork Frames & Forks, Industrial
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 33***08 | Frame, Fork | 1 |
A3-20-1 Weight Tray Assembly, Rear
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-2-1 Drawbar, 3 Point Hitch
| 13***2Z | Bolt, M16 X 120 | 2 |
| 13***1Z | Bolt, M24x110; Replaces 60***21 San11383, S/S Cancelled San 13642 (1315/ Wrong Grade) | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-13-2 Quickhitch, Excavator
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***9Z | Bolt, M8 X 35mm | 1 |
A3-15-1 Shovel Adaptor Kit, Loader Arms
| 13***7Z | Bolt | 2 |
| 13***2Z | Bolt, M12 X 50mm | 4 |
| 13***3Z | Nut, Lock, M10 | 2 |
A3-8-2 Fork Frames & Forks, Industrial
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 52***00 | Frame, Fork | 1 |
A3-14-21 Quickhitch, Loader, Mk Ii Attachments, Twin Shovel Ram (128/12547)
| 12***06 | Bush, Steel | 2 |
| 12***47 | Hitch, Assembly, Excl.Italian M/Cs | 1 |
| 12***21 | Hitch, Assembly, Italian M/Cs Only | 1 |
A3-16-1 Shovel Restraint
| 13***3Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***29 | Retainer, Shovel | 2 |
A3-12-1 Lower Links, Ball Type Category 1
| 14***99 | Bush, Top Link; See Note 1. Fit Bush Item 1 To Pitch Control Ram Or Turnbuckle When Using Category 1 Type Power Links, Bush, Top Link | 1 |
| 14***00 | Arm, Lift, Right Hand | 1 |
| 14***00 | Arm, Lift, Left Hand | 1 |
B Bodywork, Cab, Loader End
B1-4-25 Chassis, Loader
| 12***23 | Adhesive, Washer | 1 |
| 12***81 | Chassis, Loader | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-13-2 Mountings, Rear Lights, Excavator, Sideshift
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-7-1 Fenders, Front 18" Tyres
| 12***09 | Cap, Nut M8; Replaces 69***72 | 0 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt | 4 |
B1-13-1 Mountings, Rear Lights, Loader
| 13***7Z | Bolt | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***08 | Bracket, Light Mounting Rh | 1 |
B1-4-10 Chassis, Excavator, Sideshift 1850mm Wide
| 12***23 | Adhesive, Washer | 1 |
| 12***73 | Chassis, Sideshift,72"Wide | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-15-1 Soundproofing, Replaced By B1-15-2
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
B1-13-7 Mountings, Front Lights, Extension Bracket, Italian Machines Only
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
B1-16-1 Street Pads, Hydra Shuh Option
| 13***4Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***75 | Pad, Pad; Optional For Most Countries. These Street Pads Are Only Suitable For The Feet As Shown. (Germany Mainly) | 2 |
B1-17-1 Tank, Diesel, Including Battery Box
| 10***01 | Gasket | 1 |
| 12***19 | Tap, Diesel | 1 |
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
B1-20-1 Tool Mounting Plate
| 12***86 | Rack, Tool | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B1-13-6 Mountings, Wheel Chock
| 13***5Z | Bolt | 8 |
| 13***2Z | Bolt, M24x50 | 2 |
| 13***5Z | Bolt | 2 |
B1-11-1 Mountings, Hydraulic Valve, 3 Point Hitch
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***10 | Screw, Cap | 2 |
B1-16-2 Street Pads, Standard
| 13***4Z | Bolt, M12 X 60mm | 3 |
| 13***3Z | Nut, M12 | 3 |
| 14***9Z | Washer | 3 |
B1-2-1 Bonnet, Sidepanels, Front Grille
| 12***55 | Handle | 1 |
| 12***52 | Strut, Gas, Assembly | 1 |
| 13***3Z | Screw, M8 X 16 | 4 |
B1-14-1 Restraints, Loader And Excavator, Uk
| 14***63 | Strap, Retaining, Loader End | 1 |
| 14***64 | Strap, Retaining, Excavator End | 1 |
B1-9-1 Frame, Rear, Stabilisers & Wearpads
| 12***14 | Pad, Lower Wear, Colour Black | 2 |
| 12***50 | Pad, Assembly Wear, Stabiliser Leg | 2 |
| 13***9Z | Bolt, M10x90mm | 2 |
B1-5-3 Counterweight, Rear, Airmaster, Additional 275kg
| 13***8Z | Bolt | 2 |
| 13***1Z | Bolt, M24 X 220mm | 2 |
| 13***3Z | Nut | 4 |
B1-9-2 Frame, Rear, Hose Guides
| 12***92 | Tube, Wear, Nylon | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B1-11-2 Mountings, Hydraulic Valve, Excavator
| 12***94 | Pin, Pivot, Stabiliser | 1 |
| 13***0Z | Bolt, M10 X 40 | 4 |
| 13***0Z | Capscrew | 3 |
B1-4-15 Chassis, Excavator, Sideshift 2000mm Wide
| 12***23 | Adhesive, Washer | 1 |
| 12***45 | Chassis, Sideshift,78" Wide | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-12-1 Mountings, Number Plate, Roof Mounted
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
B1-13-5 Mountings, Number Plate, Rearframe Mounted
| 12***81 | Bracket, Number Plate | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 2 |
B1-13-8 Mountings, Rear Lights, Airmaster
| 12***47 | Spacer; Replaced By 12***56 | 2 |
| 12***05 | Bracket | 4 |
| 13***8Z | Screw, M8x30 | 4 |
B1-1-1 Bonnet, Release
| 12***43 | Buffer | 1 |
| 13***8Z | Screw, M8x30 | 4 |
| 13***2Z | Nut, M8 | 2 |
B1-4-35 Chassis, Utility
| 12***23 | Adhesive, Washer | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***5Z | Bolt, M24 X 300mm | 4 |
B1-5-2 Counterweight, Rear, Loader
| 13***0Z | Bolt, M10 X 100 | 4 |
| 13***5Z | Bolt | 2 |
| 13***1Z | Bolt | 2 |
B1-19-1 Top Link Retainer, 3 Point Hitch
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***96 | Top, Link, Retainer | 2 |
B1-11-3 Mountings, Hydraulic Valve, Loader
| 13***0Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
| 82***49 | Nut, Rivet M10 Open End, For 6 To 8.5mm Plate | 3 |
B1-4-1 Chassis, Airmaster
| 12***23 | Adhesive, Washer | 1 |
| 12***77 | Chassis, Airmaster | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B1-8-1 Fenders, Rear
| 13***3Z | Screw, M6x16 | 12 |
| 14***1Z | Washer | 12 |
| 14***6Z | Washer, Spring | 12 |
B1-15-2 Soundproofing
| 13***8Z | Bolt, M10 X 30 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 33***26 | Panel, Soundproofing | 1 |
B1-18-1 Tank, Hydraulic
| 12***55 | Cap, Hydraulic Filler, Non Lockable; Replaced By Mss Use The Following Parts 123/0, 4930 + 70***01 Key. See San05966 | 1 |
| 12***17 | Cover, Plate | 1 |
| 12***53 | Gauge, Sight | 1 |
B1-3-1 Bracket, Coupler Mounting, 3 Point Hitch
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 33***50 | Bracket | 1 |
B1-3-2 Bracket, Hold Down
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 6 |
| 13***3Z | Nut, M12 | 6 |
| 14***9Z | Washer | 6 |
B1-5-1 Counterweight, Rear, Airmaster
| 13***0Z | Bolt | 2 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
B1-13-4 Mountings, Rear Fog, Side Shift Excavators
| 13***0Z | Setscrew, M5x10mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Nut, M8 | 2 |
B1-4-30 Chassis, Utility
| 12***23 | Adhesive, Washer | 1 |
| 12***82 | Chassis, Utility | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
B2-9-3 Covers, Vandal Resistant, 3 Point Hitch
| 12***21 | Padlock | 1 |
| 12***39 | Catch | 1 |
| 14***25 | Plate, Spacer | 1 |
B2-17-1 Stowage Box, Cab,Canopy
| 13***5Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 14***6Z | Washer, M6 | 3 |
B2-3-1 Cab Door Stay
| 12***74 | Stay, Left Hand Door | 1 |
| 12***76 | Stop, Door Stay | 2 |
| 12***77 | Pivot, Door Stay | 2 |
B2-2-1 Cab Door
| 12***05 | Bolt, Closing | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***29 | Grommet | 1 |
B2-8-1 Consoles, Colour Graphite Grey
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***31 | Vent, Air Register | 1 |
| 12***96 | Panel, Switch | 1 |
B2-19-1 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 33***61 | Bracket, Mounting,Sun Visor | 1 |
| 82***54 | Washer, Plain | 1 |
B2-8-3 Consoles, Colour Graphite Grey
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***31 | Vent, Air Register | 1 |
| 13***8Z | Bolt | 6 |
B2-12-1 Glazing, Canopy
| 12***52 | Strip, Cosmetic Glazing | 1 |
| 82***24 | Windscreen, Green Tinted, Laminated | 1 |
| 82***69 | Glass, Front Quarter Light, Left Hand Toughened | 1 |
B2-10-1 Floormat, Bulkhead,Side Mat
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 4 |
| 33***93 | Floormat | 1 |
B2-18-1 Seat, High Back, Suspension, Pvc & Fabric, Silver Control Knobs
| 12***35 | Seat, High Back,Vinyl, Assembly | 1 |
| 12***36 | Seat, High Back,Fabric, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-14-1 Mirror, External & Interior
| 12***68 | Arm, Right Hand Mirror | 1 |
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 2 |
B2-11-1 Glazing, Cab
| 33***05 | Glass, Rear Window, Laminated | 1 |
| 82***24 | Windscreen, Green Tinted, Laminated | 1 |
| 82***28 | Glass, Left Hand Rear Side, Green Tinted | 1 |
B2-1-1 Cab Assembly
| 12***47 | Spacer | 2 |
| 12***91 | Washer, Nylon | 4 |
| 12***39 | Roof, Cab,Usa, Yellow | 1 |
B2-20-1 Window, Rear, Opening
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B2-18-2 Seat, Low Back, Suspension, Pvc & Fabric, Silver Control Knobs
| 12***33 | Seat, Low Back,Vinyl, Assembly | 1 |
| 12***34 | Seat, Low Back,Fabric, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-8-2 Consoles, Colour Graphite Grey
| 12***88 | Bracket, Switch Cover Mount; Superseded By 33***17 See San 13469 | 1 |
| 12***31 | Vent, Air Register | 1 |
| 12***47 | Plate, Switch | 1 |
B2-5-1 Canopy Assembly
| 12***47 | Spacer | 2 |
| 12***39 | Roof, Cab,Usa, Yellow | 1 |
| 12***32 | Roof, Cab,Usa, Black | 1 |
B2-13-1 Glazing, Direct, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-10-2 Floormat, Bulkhead,Side Mat
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 14***03 | Screw | 4 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 4 |
B2-15-1 Seat Belt, Inertia
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 14***4Z | Washer | 2 |
B2-16-1 Cab Mountings
| 13***3Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
B2-6-1 Canopy Shell, Abi
| 12***76 | Canopy, Assembly,Unglazed, Abi | 1 |
| 14***3Z | Screw | 2 |
| 33***28 | Cover, Inspection,Bulkhead | 1 |
B2-9-2 Covers, Vandal Resistant
| 12***86 | Catch, Vandal Cover | 1 |
| 12***91 | Washer, Nylon | 2 |
| 12***97 | Spacer | 1 |
B2-4-1 Cab Shell, Abi
| 12***75 | Cab, Assembly,Unglazed, Abi | 1 |
| 14***3Z | Screw | 2 |
| 33***28 | Cover, Inspection,Bulkhead | 1 |
B2-21-1 Window, Side, Opening
| 11***22 | Handle | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
B3-2-1 Links, Loader Arm
| 12***13 | Bush, Spring | 2 |
| 12***15 | Bush | 2 |
| 12***23 | Bush | 6 |
B3-3-2 Safety Strut, Shovel Ram
| 12***00 | Strap | 1 |
| 12***02 | Stop | 2 |
| 14***00 | Strut, Travel, 654mm Long | 1 |
B3-4-1 Travel Lock, Loader Arms
| 12***02 | Stop | 2 |
| 12***44 | Strap | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
B3-3-5 Safety Strut, Loader Arms, 70x50 Lift Ram
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
| 12***44 | Strap | 1 |
B3-1-1 Arms, Loader
| 12***23 | Bush | 2 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
B3-3-1 Safety Strut, Loader Arms, 70x40 Lift Ram
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
| 12***44 | Strap | 1 |
B4-8-1 Safety Strut, Germany Travel
| 12***00 | Strap | 1 |
| 12***02 | Stop | 2 |
| 12***60 | Chain, Security | 1 |
B4-6-1 Pivot Pins, Extending Excavator, 10' & 12'
| 13***7Z | Bolt | 3 |
| 13***9Z | Bolt, M10x90mm | 5 |
| 13***2Z | Nut, Lock | 2 |
B4-2-3 Dipper 10', Extending
| 12***38 | Bush | 2 |
| 12***07 | Plate, Spreader; Replaced By 33***94, See San 13691 | 4 |
| 12***89 | Pad, Top Wear | 4 |
B4-11-1 Tipping Lever
| 13***7Z | Bolt | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***02 | Lever, Tipping | 2 |
B4-6-2 Pivot Pins, Fixed Excavator End, 10' & 12'
| 13***5Z | Bolt | 1 |
| 13***7Z | Bolt | 3 |
| 13***9Z | Bolt, M10x90mm | 3 |
B4-2-1 Dipper 10', Fixed
| 12***38 | Bush | 2 |
| 12***00 | Dipper, Assembly | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
B4-9-1 Tipping Link, Basic
| 12***07 | Bush | 2 |
| 12***38 | Bush | 1 |
| 14***00 | Link, Tipping | 1 |
B4-5-1 Lock, Slew
| 12***43 | Spacer | 1 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***3Z | Nut, M12 | 1 |
B4-2-2 Dipper 12', Fixed
| 12***38 | Bush | 2 |
| 12***88 | Dipper, Assembly | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
B4-2-4 Dipper 12', Extending
| 12***38 | Bush | 2 |
| 12***89 | Pad, Top Wear | 4 |
| 12***56 | Spacer, Steel | 8 |
B4-1-2 Boom 12', Fixed And Extending, Excavator End
| 12***87 | Boom, Assembly | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 33***79 | Plug, Blanking 25mm Dia | 2 |
B4-10-1 Tipping Link, With Lifting Shackle
| 12***07 | Bush | 2 |
| 12***38 | Bush | 1 |
| 14***00 | Link, Tipping,With Shackle | 1 |
B4-1-1 Boom 10', Fixed And Extending, Excavator End
| 12***99 | Boom, Assembly | 1 |
| 14***02 | Nipple, Grease, 1/4" Bsp 90deg. | 1 |
| 83***64 | Bush, Bronze | 2 |
B4-3-1 Kingpost Carriage, Sideshift
| 12***42 | Kingpost, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***4Z | Bolt, M10x60 | 2 |
B4-4-1 Lock, Boom
| 12***52 | Joint, Ball End | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
B5-7-1 Decals, Supplementary, Airmaster
| 33***46 | Label, Compressor Caution | 1 |
| 81***52 | Label, Drain Daily | 1 |
| 81***54 | Decal, Warning,Moving Parts | 3 |
B5-7-5 Decals, Supplementary, Swedish Homologation
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***07 | Plate, Reflector Mounting | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B5-6-1 Decals, Non Language, Symbols
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***87 | Decal, Tie Down (Chain) | 4 |
B5-1-1 Decals, Control, Loader, Black & Silver Knobs
| 81***71 | Decal, Loader Lever, With Float, Reset | 1 |
| 81***72 | Label, Loader Auxiliary, Clamshovel | 1 |
B5-9-1 Paint
| 42***01 | Thinners, 1 Litre, 2-Pack | 0 |
| 42***40 | Paint, Gloss, 0.5 Litre, Two Pack Yellow | 0 |
| 42***43 | Paint, Gloss, 5 Litre, Two Pack Yellow | 0 |
B5-7-4 Decals, Supplementary, Italian Homologation
| 12***99 | Plate, Hazard Warning | 3 |
| 25***03 | Ring, Key | 1 |
| 70***16 | Switch, 3 Position, 12v | 1 |
B5-4-1 Decals, Language, Common
| 81***95 | Decal, Warning, Disconnect Battery | 1 |
| 81***24 | Label, Craning, Finnish | 2 |
| 81***37 | Label, Hydraulic Oil Only | 1 |
B5-4-2 Decals, Language, Common
| 81***80 | Label, Press. Cooling | 1 |
| 81***84 | Label, Warning, Boom Lock | 1 |
| 81***91 | Label, Warning, Servicing | 2 |
B5-6-2 Decals, Non Language, Symbols
| 81***80 | Label, Drain Every 50 Hours | 1 |
| 81***39 | Label, Coolant Warning | 1 |
| 81***87 | Decal, Tie Down (Chain) | 4 |
B5-10-1 Tool Kit
| 12***01 | Pin | 1 |
| 14***58 | Key | 1 |
| 27***00 | Bag, Tool | 1 |
B5-5-3 Decals, Machine Identity
| 13***01 | Nut | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 3 |
B5-11-1 Labels, Load Charts
| 33***29 | Label, Lift Chart, Non En474 | 1 |
| 33***80 | Label, Lift Chart, 12' Fix | 1 |
| 33***92 | Label, Lift Chart, 10' Fix | 1 |
B5-7-2 Decals, Supplementary, Utility
| 14***94 | Disc, Decal | 1 |
| 81***54 | Decal, Warning,Moving Parts | 2 |
| 81***32 | Label, Power Take-Off, Warning | 1 |
B5-6-11 Label, Warning
| 12***00 | G.A., Safety Labels | 1 |
| 33***08 | Decal, Warning-Fan Blades, Remove Key From Ign. | 1 |
| 33***01 | Decal, Safe Load, Iso | 1 |
B5-2-1 Decals, Control, Excavator, Jcb X Pattern, Black & Silver Knobs
| 24***04 | Seal | 0 |
| 33***44 | Label, Hydraclamp Control | 1 |
| 81***77 | Decal, Breaker | 1 |
B5-2-3 Decals, Control, Excavator, Iso + Pattern, Black & Silver Knobs
| 24***04 | Seal | 0 |
| 33***44 | Label, Hydraclamp Control | 2 |
| 81***77 | Decal, Breaker | 1 |
B5-8-1 Fire Extinguisher, 2.5kg
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
| 82***68 | Rivet, Nut | 2 |
B5-0-11 Labels, Buy British
| 81***03 | Label, Buy British, 46 X 60mm | 2 |
B5-5-1 Decals, Machine Identity
| 13***1Z | Nut | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 3 |
B5-3-1 Decals, Control, Utility
| 81***52 | Label, Controls | 2 |
| 81***20 | Label, Power Take-Off Lever | 1 |
B5-2-2 Decals, Control, Excavator, Jcb + Pattern, Black & Silver Knobs
| 24***04 | Seal | 0 |
| 33***44 | Label, Hydraclamp Control | 1 |
| 81***77 | Decal, Breaker | 1 |
B5-7-6 Decals, Supplementary, Austrian Homologation
| 13***5Z | Bolt | 4 |
| 14***26 | Link, Travel | 1 |
| 14***00 | Plate, Front Number Wa | 1 |
B5-6-21 Label, Safety
| 12***29 | G.A., Safety Labels Usa | 1 |
| 33***07 | Label, Fan Guard-Warning, Ansi | 1 |
| 33***09 | Decal, Safe Load, Ansi | 1 |
B5-7-3 Decals, Supplementary, German Homologation
| 70***00 | Reflector, Red | 2 |
| 81***01 | Label, No Passengers, German | 1 |
| 81***43 | Label, Warning | 1 |
B5-5-2 Decals, Machine Identity
| 13***1Z | Nut | 3 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 3 |
B7-1-2 Circuit, Air/Hydraulic
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
B7-1-1 Circuit, Air/Hydraulic, Also Refer To Ti 2/501
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
B7-4-1 Fan & Fan Cowl
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***20 | Bracket, Mounting | 2 |
| 14***00 | Fan, Cooling, 18", 10 Blades | 1 |
B7-6-1 Hitch, Recovery, Manual
| 13***6Z | Bolt, M20 X 70 | 2 |
| 14***2Z | Washer, M20 | 2 |
| 15***00 | Pin | 1 |
B7-3-1 Compressor, Unit
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***5Z | Bolt | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
B7-13-1 Valve, Blow Down
| 13***1Z | Nut | 6 |
| 14***11 | Valve, Blowdown | 1 |
| 14***9Z | Washer | 6 |
B7-10-1 Speed Control, Installation
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
B7-12-1 Suction Unloader
| 14***10 | Gasket | 1 |
| 14***00 | Valve, Unloader Assembly | 1 |
| 99***00 | Kit, Seal/Repair | 1 |
B7-11-1 Speed Control
| 13***1Z | Nut | 4 |
| 14***13 | Cylinder, Speed Control | 1 |
| 14***9Z | Washer | 6 |
B7-9-1 Receiver, Air/Oil
| 13***1Z | Bolt, M10 X 45mm | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 14***18 | Dipstick, Assembly | 1 |
B7-7-1 Hitch, Tow 3.5t Capacity
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 2 |
| 14***9Z | Washer | 4 |
B7-7-2 Hitch, Tow 3.5t Capacity, Sales Special
| 13***8Z | Bolt, M12 X 80mm | 4 |
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***3Z | Nut, M20 | 4 |
B7-2-1 Compressor, Assembly
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***7Z | Screw, M6 X 25mm Long | 34 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B7-8-1 Oil Cooler
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B7-5-1 Filter, Airmaster
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
C Electrics-Machine, Cab & Engine
C1-5-1 Harness, Cab/Canopy Roof
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***15 | Grommet | 1 |
C1-5-9 Harness, Rear Work Lights, Airmaster
| 72***34 | Harness, Double Wire | 1 |
C1-2-2 Battery & Isolator, Option
| 12***59 | Clip | 1 |
| 12***97 | Bolt, Swing, Link Mounting | 1 |
| 13***8Z | Screw, M8x30 | 3 |
C1-15-3 Light, Rear, Driving, Loader
| 13***2Z | Bolt, M8x50 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***08 | Bracket, Light Mounting Rh | 1 |
C1-5-8 Harness, 3 Point Hitch, Pto
| 72***21 | Harness | 1 |
C1-7-2 Horn, Rear
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-11-1 Light, Front, Driving Rh Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***55 | Light, Head Assembly, Right Hand Dip | 2 |
C1-5-5 Harness, Shovel Reset
| 27***06 | Tie, Cable 385mm Long | 2 |
| 70***35 | Cover, Return To Dig Switch, Soft Touch | 1 |
| 70***00 | Switch, 12v | 1 |
C1-9-1 Light, Beacon, Hazard Warning, Amber
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
C1-6-4 Harnesses, Smooth Ride System, Srs
| 70***42 | Cover, Srs Switch, Soft Touch | 1 |
| 70***00 | Switch, 12v | 1 |
| 82***44 | Tie, Cable, 200mm Long | 3 |
C1-13-1 Light, Front, Driving Indicator
| 12***69 | Gasket, Left Hand Indicator | 1 |
| 12***70 | Gasket, Right Hand Idicator | 1 |
| 14***7Z | Washer | 4 |
C1-5-4 Harness, Trailer Electrics
| 13***3Z | Nut | 3 |
| 13***8Z | Bolt | 3 |
| 24***15 | Grommet | 1 |
C1-6-3 Harnesses, Loader & Utility, Machine
| 12***47 | Clip, Cable | 5 |
| 12***47 | Cover, Harness, Floor | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
C1-28-1 Drop-Down Alarm, Sideshift Stabiliser, Mandatory For E.U.
| 33***52 | Switch, Proximity | 2 |
| 72***98 | Link, Low Leg Warning Switch Cap | 2 |
C1-18-1 Light, Rear, Working, Cab Roof Mounted
| 12***05 | Bracket | 4 |
| 12***70 | Grommet, (1 Hole) | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 0 |
C1-16-1 Light, Rear Fog
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 14***5Z | Washer, Spring, M5 | 2 |
| 70***00 | Light, Fog | 1 |
C1-14-1 Light, Front, Working, Cab Mounted
| 14***07 | Screw | 4 |
| 70***03 | Spring | 2 |
| 70***00 | Light, Front Working | 2 |
C1-15-1 Light, Rear, Driving, Excavator Sideshift
| 13***8Z | Screw, M8x30 | 4 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
C1-17-1 Light, Rear, Number Plate, Roof Mounted
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 2 |
| 72***67 | Harness, Number Plate Lights | 1 |
C1-12-1 Light, Front, Driving Rh Dip, White With Side Repeat
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***56 | Light, Head Assembly, Right Hand | 1 |
C1-2-1 Battery
| 12***59 | Clip | 1 |
| 12***97 | Bolt, Swing, Link Mounting | 1 |
| 13***4Z | Bolt, M6 X 60 | 2 |
C1-10-1 Light, Front, Driving Lh Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***54 | Light, Head Assembly, Left Hand Dip | 2 |
C1-6-6 Harnesses, Rear Light, Excavator Mounted German Only
| 72***44 | Harness, Rear Lights | 1 |
| 72***45 | Harness, Extension, Rear Lights | 1 |
C1-1-1 Alarm, Reverse, Excavators
| 33***03 | Harness, Reverse Alarm | 1 |
| 71***00 | Alarm, Reverse | 1 |
| 72***72 | Harness, Reverse Alarm | 1 |
C1-8-1 Light, Toothguard Mounted
| 12***00 | Clamp | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***7Z | Bolt | 4 |
C1-19-1 Shovel Reset, Installation
| 13***3Z | Screw, M8 X 16 | 4 |
| 13***2Z | Nut, Thin M20 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C1-5-3 Harness, Steer Mode Selection, 2/4ws
| 70***57 | Switch, 2ws Mode | 1 |
| 72***49 | Harness, Steermode, No Crab | 1 |
| 81***54 | Label, 2/4ws Mode | 1 |
C1-5-2 Harness, Cab/Canopy Roof
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 24***15 | Grommet | 1 |
C1-1-2 Alarm, Reverse, Loaders
| 33***03 | Harness, Reverse Alarm | 1 |
| 71***00 | Alarm, Reverse | 1 |
| 72***72 | Harness, Reverse Alarm | 1 |
C1-17-2 Light, Rear, Number Plate, Rearframe Mounted
| 70***00 | Light, Number Plate | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
| 82***44 | Tie, Cable, 200mm Long | 2 |
C1-5-6 Harness, Hydraulic Tools, Circuit (Htc)
| 70***66 | Insert, Switch Htc | 1 |
| 70***87 | Insert, Switch Htc | 1 |
| 70***05 | Switch, Spst | 1 |
C1-7-1 Horn, Front, Single Tone
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-6-2 Harnesses, Excavator, Machine
| 12***47 | Clip, Cable | 5 |
| 12***47 | Cover, Harness, Floor | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
C1-15-2 Light, Rear, Driving, Roof Mounted
| 13***1Z | Nut, M5-8 | 4 |
| 14***7Z | Washer | 4 |
| 24***12 | Grommet, Panel Hole Dia 29mm, Panel Thk 2.8-3.5mm | 2 |
C1-5-7 Harness, Trailer Electrics
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
C1-6-1 Harnesses, Airmaster, Machine
| 12***47 | Clip, Cable | 5 |
| 12***47 | Cover, Harness, Floor | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
C1-40-1 Boom, Load Sense
| 33***50 | Harness, Boom Link, 3000mm Long | 1 |
| 33***95 | Actuator, Switch, Boom Overload | 1 |
| 33***15 | Transducer, Pressure, 180 Bar, Red | 1 |
C1-6-5 Harnesses, Air Conditioning
| 26***18 | Housing, Binary Switch | 1 |
| 70***26 | Switch, Binary | 1 |
| 70***31 | Actuator, Aircon Switch, Soft Touch | 1 |
C2-4-1 Alternator, 12volt - 95amp
| 13***8Z | Screw, Star Drive, M10 X 30 | 1 |
| 13***2Z | Bolt, Star Drive, M10 X 120 | 1 |
| 32***60 | Alternator, 12v-95amp | 1 |
C2-3-1 Starter Motor, 12.Volt
| 13***8Z | Screw, Star Drive, M10 X 30 | 3 |
| 32***22 | Motor, Starter 12v | 1 |
| 32***52 | Motor, Starter | 1 |
C2-1-1 Switches & Senders
| 17***02 | Seal, Ring | 1 |
| 32***38 | Switch, Engine Oil Pressure | 1 |
| 32***57 | Seal, Bonded | 1 |
C2-5-2 Grid Heater Relay, Installation, Turbo
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
| 12***65 | G.A, Grid Heater, Turbo | 1 |
C2-5-1 Grid Heater Relay, Installation, Naturally Aspirated
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
| 12***67 | I.A, Grid Heater N/Asp, 2cx Scout | 1 |
C2-2-1 Engine Shut-Off, Solenoid Link, & Electrical Fastenings
| 12***95 | Clip, Harness Support | 2 |
| 12***47 | Clip, Cable | 2 |
| 12***53 | Spacer | 2 |
C2-6-1 Engine Immobiliser, 12.Volt
| 12***25 | G.A, Engine Immobiliser, Scout | 1 |
| 32***93 | Spring, Immobiliser | 1 |
| 32***94 | Spacer, Immobiliser | 1 |
C2-7-2 Engine Block Heater, 240v
| 32***53 | Washer, Copper Sealing | 1 |
| 32***59 | Element, Engine Block Heater, 230v | 1 |
| 32***60 | Kit-Block Heater, Engine, 230v | 1 |
C3-6-2 Heater, Installation, With Air Conditioning
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***3Z | Nut | 6 |
| 13***4Z | Screw | 6 |
C3-14-1 Wash/Wipe Motor, Front Screen, Single Speed
| 71***00 | Arm, Wiper | 1 |
| 71***00 | Blade, Wiper | 1 |
| 71***00 | Wiper, Motor (Front) | 1 |
C3-9-1 Switch, Column - Black
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
| 70***92 | Switch, Column, Manual | 1 |
C3-10-2 Switches, Electrical, Front And Side Consoles
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***91 | Insert, Switch,Rear Horn | 1 |
| 70***42 | Cover, Srs Switch, Soft Touch | 1 |
C3-2-1 Air Conditioning, Installation
| 13***1Z | Setscrew, M6 X 12mm Long | 4 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 1 |
C3-4-1 Face Level Fan, Installation
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 14***6Z | Washer, Spring | 4 |
C3-15-2 Wash/Wipe, Washer Bottle, Front & Rear Screens
| 12***75 | Screen Washer Bottle, Cab | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 33***04 | Tube, Split, Conduit | 1 |
C3-6-1 Heater, Installation, Without Air Conditioning
| 12***50 | Adapter, Bulkhead | 2 |
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***3Z | Nut | 6 |
C3-1-1 Air Conditioning, Assembly Abi
| 13***5Z | Bolt, M5 X 20mm Long | 26 |
| 13***8Z | Bolt | 1 |
| 13***3Z | Nut | 4 |
C3-7-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
C3-15-1 Wash/Wipe, Washer Bottle, Front & Rear Screens
| 25***03 | Jet, Screen Washer | 1 |
| 33***04 | Tube, Split, Conduit | 1 |
| 33***68 | Bottle, Screenwash | 1 |
C3-11-3 Warning Lights, Cluster And Gauges, Front Console
| 70***20 | Cap | 3 |
| 70***85 | Holder, Bulb | 3 |
| 70***98 | Gauge, Fuel Level | 1 |
C3-10-1 Switches, Electrical, Front And Side Consoles
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***21 | Actuator, Hazard Switch | 1 |
| 70***24 | Actuator, Head Lights Switch | 1 |
C3-11-2 Warning Lights, Cluster And Gauges, Front Console
| 70***20 | Cap | 3 |
| 70***85 | Holder, Bulb | 3 |
| 70***98 | Gauge, Fuel Level | 1 |
C3-8-1 Radio Installation
| 14***07 | Screw | 8 |
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 1 |
| 33***86 | Console, Speaker; Superseded By 33***90 See San 20728 | 1 |
C3-5-1 Fuse Box & Relays, Excavator & Loader
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***31 | Plate, Fuse Mounting | 1 |
C3-12-2 Warning Lights, Side Console
| 70***49 | Light, Panel Led, Air Filter | 1 |
| 70***50 | Light, Panel Led, Eng/Trans Pressure | 1 |
| 70***51 | Light, Panel Led, Eng/Trans Temp | 1 |
C3-41-11 Livelink
| 12***47 | G.A., Livelink, Row | 1 |
| 12***76 | G.A., Livelink, N America | 1 |
| 13***3D | Nut, M6 Lock | 3 |
C3-11-1 Warning Lights, Front Console
| 70***13 | Bulb, 12v 1.7w | 12 |
| 70***00 | Cluster, Warning Light | 1 |
C3-10-3 Switches, Electrical, Front And Side Consoles
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***21 | Actuator, Hazard Switch | 1 |
| 70***24 | Actuator, Head Lights Switch | 1 |
C3-31-21 Immobiliser, Installation, Cab, Key Operated
| 12***19 | G.A., Immobiliaser | 1 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***01 | Washer | 2 |
C3-13-1 Wash/Wipe Motor, Rear Screen
| 33***31 | Motor, Wiper, 90deg | 1 |
| 34***17 | Cover, Wiper Motor | 1 |
| 71***00 | Arm | 1 |
C3-12-1 Warning Lights, And Gauges, Side Console
| 70***20 | Cap | 3 |
| 70***50 | Light, Panel Led, Eng/Trans Pressure | 1 |
| 70***51 | Light, Panel Led, Eng/Trans Temp | 1 |
C3-11-5 Warning Lights, Front Console
| 70***13 | Bulb, 12v 1.7w | 12 |
| 70***88 | Cluster, Warning Lamp | 1 |
C3-16-1 Immobiliser, Installation
| 70***03 | Key, Immobiliser | 1 |
| 71***58 | Unit, Immobiliser, Cab Dash Fitted; When Nla See Tsdb 469 | 1 |
| 71***74 | Receptacle, Dallas Key Assembly | 1 |
C4-4-1 Econoseal, Connectors, Fly Leads
| 72***15 | Plug, Dummy, Econoseal | 1 |
| 72***08 | Housing, 2 Way, Econoseal | 1 |
| 72***09 | Retainer, 2way Socket, Econoseal | 1 |
C4-3-1 Deutsch, Multi-Way Block, Drb Range
| 72***42 | Socket, Solid,Size 20, Wire Size 0.5-1.0mm | 72 |
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 24 |
| 72***44 | Socket, Solid,Size 16, Wire Size 1.0-2.0mm | 24 |
C4-2-1 Conversion Harness'S
| 71***00 | Harness, 2-Way Link 40mm Long, Packard-Amp J/Timer | 1 |
| 72***63 | Harness, 2-Way Link 40mm Long, Deutsch-Amp/Jnrtimer; Deutsch Pin Hsg-Amp J/Timer Hsg. Normal Polarity, Harness, 2-Way Link 40mm Long, Deutsch-Amp/Jnrtimer | 1 |
| 72***65 | Harness, 2-Way Link 40mm Long, Deutsch-Sumitomo | 1 |
C4-9-1 Tools, All Make Connectors
| 89***49 | Tool, Crimp | 1 |
| 89***50 | Heater, Assembly, Butane | 1 |
| 89***69 | Tool, Pin/Receptcal, Removal (Power) Itt | 1 |
C4-7-1 Packard, Connectors, Flyleads
| 72***11 | Connector, Terminal | 1 |
| 72***12 | Terminal, Socket | 1 |
| 72***07 | Terminal, Pin | 1 |
C4-1-1 Blanking Plugs, All Makes
| 21***03 | Plug, 3 Way Male Blanking, Connector | 1 |
| 71***00 | Plug, Junior Timer Sealed, Socket Ho. Amp 2-Way | 1 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 1 |
C4-0-1 Information Page, Connectors, Electrical
C4-5-1 Itt/Cannon, Connectors, Fly Leads
| 72***03 | Pin, Female, 0.5-1.5mm, Signal | 1 |
| 72***04 | Pin, Female, 1.5-2.0mm, Signal | 1 |
| 72***05 | Pin, Female, 2.5-4.0mm, Power | 1 |
C4-3-20 Deutsch, Minature Terminal, Dtm Range
| 72***42 | Socket, Solid,Size 20, Wire Size 0.5-1.0mm | 35 |
| 72***47 | Pin, Solid,Size 20, Wire Size .05-1.0mm | 35 |
| 72***52 | Plug, Seal, Cavity Size 20 | 0 |
C4-3-10 Deutsch, Standard Terminal, Dt Range
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 35 |
| 72***44 | Socket, Solid,Size 16, Wire Size 1.0-2.0mm | 35 |
| 72***48 | Pin, Solid, Size 16, Wire Size 0.5-1.0mm | 35 |
C4-3-30 Deutsch, Bulkhead, Hdp Range, Round, 9,16,23 & 31 Way
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 54 |
| 72***44 | Socket, Solid,Size 16, Wire Size 1.0-2.0mm | 54 |
| 72***45 | Socket, Solid,Size 12, Wire Size 2.0-3.0mm | 16 |
C4-3-40 Deutsch, Bulkhead, Hdp Range, Round, 18,19 & 29 Way
| 72***25 | Terminal, Crimp 5.0 To 8.0mm | 2 |
| 72***42 | Socket, Solid,Size 20, Wire Size 0.5-1.0mm | 6 |
| 72***43 | Socket, Solid,Size 16, Wire Size 0.5-1.0mm | 73 |
C4-6-1 Miscellanous, Connectors, Flyleads, J/Timer, Amp, Hirschmann, Pozilok, Merit
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C4-8-1 Sumitomo, Connectors, Flyleads
| 72***01 | Connector, Female | 1 |
| 72***02 | Connector, Female | 2 |
| 72***01 | Connector, Male | 1 |
D Controls-Machine, Engine & Steering
D1-3-1 Control Knob, Loader Valve, Black And Silver
| 12***59 | Ring, Tolerance | 1 |
| 12***48 | Knob, Assembly | 1 |
| 70***00 | Switch, Micro | 1 |
D1-1-2 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***96 | Gaiter, Gear Lever | 1 |
| 12***34 | Knob, Assembly | 1 |
D1-9-1 Lever Lock, Excavator Valve, Italian Build Only
| 12***81 | Bar, Lever Lock | 1 |
| 12***16 | Plate, Lock | 1 |
| 12***53 | Lever, Excavator, Left Hand Control | 1 |
D1-9-2 Lever Lock, Loader Valve
| 24***08 | Grommet | 1 |
| 24***12 | Grommet | 1 |
| 33***05 | Bar, Locking | 1 |
D1-5-1 Controls, Excavator
| 11***16 | Joint, Universal | 2 |
| 12***59 | Ring, Tolerance | 2 |
| 12***94 | Pin, Pivot, Stabiliser | 1 |
D1-6-1 Controls, Hydraclamp
| 13***1Z | Nut | 1 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 3 |
| 14***19 | Knob | 1 |
D1-7-1 Controls, Loader Valve, 2 & 3 Spool
| 12***02 | Joint, Ball, M8 Right Hand | 3 |
| 13***4Z | Bolt | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 1 |
D1-2-1 Control, Parking Brake
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***50 | Lever, Parkbrake | 1 |
| 13***2Z | Bolt | 2 |
D1-1-1 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***96 | Gaiter, Gear Lever | 1 |
| 12***34 | Knob, Assembly | 1 |
D1-4-1 Control, Foot, Excavator Auxiliary
| 12***84 | Seal, Auxiliary Pedal | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***80 | Fastener, Fir Tree | 0 |
D2-1-1 Controls, Throttle & Stop
| 12***57 | Pivot, Cable | 1 |
| 12***31 | G.A, Pedal Throttle, 2cx Mkiii | 1 |
| 12***02 | G.A, Mount Hand Throttle, 2cxmkiii | 1 |
D2-21-1 Controls, Throttle & Stop
| 12***59 | Bracket, Reaction Wa | 1 |
| 12***66 | Engine, Mount Throttle | 1 |
| 12***69 | Assembly, Pivot Arm | 1 |
D2-31-1 Controls, Throttle & Stop
| 12***59 | Bracket, Reaction Wa | 1 |
| 12***66 | Engine, Mount Throttle | 1 |
| 12***69 | Assembly, Pivot Arm | 1 |
D2-11-1 Controls, Throttle & Stop
| 12***57 | Pivot, Cable | 1 |
| 12***72 | G.A, Throttle Pedal, 2cx Mkiii | 0 |
| 12***37 | Arm, Throttle Pivot | 1 |
D3-1-1 Steering Column, Fixed
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***52 | Plate, Retainer | 1 |
E Hydraulics & Air Including, Steering
E1-4-1 Circuit, Dipper & Bucket, (Iso & Jcb) Extending Excavator End 10'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
E1-16-10 Hose Clamps, Transmission Cooling
| 12***05 | Bracket, Hose Clip | 1 |
| 12***59 | Bracket, Hose Clip | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
E1-3-1 Circuit, Auxiliary, Extending Dipper 10'
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-1-1 Circuit, Boom (Iso & Jcb), 1850mm Wide Rearframe
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 22***17 | Clip, Worm Drive | 1 |
| 33***78 | Pipe, Wa; Superseded By 33***46 See San 25324 | 1 |
E1-3-12 Circuit, Auxiliary, Extending Dipper 12'
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Nut | 1 |
E1-11-2 Circuit, Hydraulic Tools, Roadbreaker
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-14-3 Circuit, Steering, 4 Wheel Steer, With Anticavitation Valve
| 12***15 | Bracket, Mounting | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 5 |
E1-5-1 Circuit, Dipper & Bucket, Iso & Jcb,10' Excavator End Fixed 1850mm
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 4 |
E1-13-11 Circuit, Stabiliser, Sideshift,6'0"Frame, With Hose Burst Protection Italian Build
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt | 4 |
| 14***3Z | Washer, Medium | 4 |
E1-14-4 Circuit, Steering, 2/4ws Option, With Anticavitation Valve
| 12***15 | Bracket, Mounting | 1 |
| 12***92 | Pipe, Steer, Wa | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
E1-13-10 Circuit, Stabiliser, 1850mm Wide R/Frame, With Optional Lockout Valves
| 13***2Z | Bolt | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
| 16***63 | Adaptor | 4 |
E1-13-2 Circuit, Stabiliser, 2000mm Wide, Rearframe
| 13***2Z | Bolt | 4 |
| 61***00 | Hose, 1/4"Bsp 1370mm | 4 |
| 61***00 | Hose | 4 |
E1-16-2 Circuit, Transmission Cooling, With Pto
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-15-1 Circuit, Suspension, Smooth Ride System
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
E1-3-22 Circuit, Auxiliary, Extending Dipper 12', With Breaker
| 13***9Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
E1-9-2 Circuit, Neutral, Airmaster & Loader
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
E1-14-2 Circuit, Steering, 2/4ws Option, Without Anticavitation Valve
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***12 | Capscrew | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E1-8-40 Circuit, Hbcv, Loader Lift Rams, Non Srs
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M8x40 | 4 |
| 13***3Z | Bolt, M8 X 55 | 2 |
E1-9-1 Circuit, Neutral, Excavators
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
E1-50-1 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-14-1 Circuit, Steering, 4 Wheel Steer, Without Anticavitation Valve
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 3 |
| 13***2Z | Nut | 1 |
E1-6-1 Circuit, Hitch-3 Point, Valve Block To Bulkhead
| 13***2Z | Nut | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 14***4Z | Washer, Star | 4 |
E1-12-2 Circuit, Slew, 2000mm Wide, Rearframe
| 24***06 | O Ring | 1 |
| 61***00 | Hose, 1/4bsp X 1680 | 1 |
| 61***00 | Hose, 1/4" 1120mm Long | 1 |
E1-4-2 Circuit, Dipper & Bucket, (Iso & Jcb) Extending Excavator End 12'
| 13***9Z | Screw, M10x35mm | 8 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
E1-11-1 Circuit, Hydraulic Tools-Htc, Roadbreaker
| 13***7Z | Bolt, M10x25 | 4 |
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-13-20 Circuit, Stabiliser, 2000mm Wide R/Frame, With Optional Lockout Valves
| 13***2Z | Bolt | 4 |
| 16***51 | Adaptor, 1/4"Bsp X 9/16"Sae | 4 |
| 16***63 | Adaptor | 4 |
E1-3-2 Circuit, Auxiliary, Extending Dipper 10', With Breaker
| 13***9Z | Bolt | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***9Z | Setscrew, M8x35 | 2 |
E1-15-2 Circuit, Suspension, Smooth Ride System
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***0Z | Bolt, M10 X 100 | 1 |
E1-2-1 Circuit, Auxiliary, Breaker, 10' & 12' Fixed Dippers
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***8Z | Bolt, M10 X 30 | 6 |
| 13***4Z | Bolt, M10x60 | 2 |
E1-12-1 Circuit, Slew, 1850mm Wide, Rearframe
| 24***06 | O Ring | 1 |
| 61***00 | Hose | 1 |
| 61***00 | Hose | 1 |
E1-16-1 Circuit, Transmission Cooling
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
E1-8-10 Circuit, Loader & Shovel
| 13***9Z | Setscrew, M8x35 | 8 |
| 13***4Z | Bolt | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 4 |
E1-14-5 Circuit, Steering, 4 Wheel Steer, With Anticavitation Valve
| 12***15 | Bracket, Mounting | 1 |
| 12***92 | Pipe, Steer, Wa | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-7-1 Circuit, Hydraclamp
| 14***11 | Seal, Bonded | 2 |
| 24***03 | O Ring | 4 |
| 61***00 | Hose | 2 |
E1-6-3 Circuit, Hitch, Tilt,Pitch,Lift Rams
| 13***9Z | Bolt, M8 X 35mm | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 61***00 | Hose | 4 |
E1-8-30 Circuit, Loader Auxiliary
| 13***1Z | Bolt, M10 X 45mm | 7 |
| 13***3Z | Nut, Lock, M10 | 7 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 7 |
E1-9-3 Circuit, Neutral, Utility
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
E1-13-21 Circuit, Stabiliser, Sideshift,6'6"Frame, With Hose Burst Protection Italian Build
| 13***0Z | Bolt | 4 |
| 13***2Z | Bolt | 4 |
| 14***3Z | Washer, Medium | 4 |
E1-1-2 Circuit, Boom (Iso & Jcb), 2000mm Wide Rearframe
| 13***3Z | Nut, Back 3/8" Bsp | 2 |
| 22***17 | Clip, Worm Drive | 1 |
| 33***78 | Pipe, Wa; Superseded By 33***46 See San 25324 | 1 |
E1-13-1 Circuit, Stabiliser, 1850mm Wide, Rearframe
| 13***2Z | Bolt | 4 |
| 61***00 | Hose, 1/4bspx1270 | 4 |
| 82***34 | Clamp, 16mm/16mm Holes, 26mm High | 4 |
E1-6-2 Circuit, Hitch Auxiliaries
| 45***60 | Coupling, Qrc 3/8"Bsp Female | 4 |
| 47***08 | Cap, Qrc Dust, Green | 4 |
| 61***00 | Hose | 2 |
E1-5-3 Circuit, Dipper & Bucket, Iso & Jcb, 12' Excavator End Fixed
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 4 |
E2-1-1 Pump,Single, Main Hydraulic, Jcb Engine
| 13***8Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
E3-1-1 Cover, Inlet & Outlet, Excavator Valve
| 25***12 | O Ring, Interface, Valve Sections | 2 |
| 25***16 | Seal | 1 |
| 25***17 | Plug | 1 |
E3-10-1 Valve,Aux Relief, Iso Pattern, Excavator
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***30 | Kit-Seal | 1 |
E3-11-1 Valve,Section, Excavator,Components
| 25***59 | Valve, Section | 1 |
| 25***24 | Seat | 2 |
| 25***01 | Screw | 2 |
E3-7-1 Valve,Excavator, Iso Control, 7 Spool
| 13***0Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
| 16***53 | Adaptor; O Ring 24***06 | 3 |
E3-13-6 Valve Section, Shovel, Reset Electric With Regen
| 25***83 | Sleeve, Magnetic | 1 |
| 25***71 | Valve, Section With Regen, Electric Reset | 1 |
| 25***01 | Screw | 2 |
E3-10-2 Valve,Aux Relief, Jcb Pattern, Excavator
| 25***19 | Kit-Seal, Relief Valve | 1 |
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***30 | Kit-Seal | 1 |
E3-9-40 Valve,Loader, Control 3 Spool, Shovel Reset/Aux Detent & Shovel Regen
| 13***1Z | Nut | 1 |
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
E3-2-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
| 32***01 | Element, Hydraulic Filter, 5 Micron 254 Long | 1 |
E3-13-2 Valve,Section, Loader Aux & Shovel, No Detent/Reset
| 25***01 | Screw | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-12-2 Valve,Section, Hitch Pitch,Tilt,Aux, Utility
| 25***55 | Valve, Section | 2 |
| 25***57 | Valve, Section | 1 |
| 25***01 | Screw | 2 |
E3-13-1 Valve,Section, Loader Aux, Mechanical Detent
| 25***51 | Valve, Section, Mech.2 Position Detent | 1 |
| 25***52 | Spool, End | 1 |
| 25***53 | Sleeve | 1 |
E3-10-3 Valve,Aux Relief, Loader
| 25***97 | Valve, Main Relief, 3500psi; Shovel Circuit Without Regen. For Use With Single Shovel Ram System Only, Valve, Main Relief, 3500psi | 1 |
| 25***15 | Valve, Relief,Auxiliary, 2750psi; Shovel Circuit With Regen. For Use With Twin Shovel Ram System Only, Valve, Relief,Auxiliary, 2750psi | 1 |
| 25***21 | Valve, Relief, Auxiliary, 2000 Psi; Shovel Circuit With Regen. For Use With Twin Shovel Ram System Only | 1 |
E3-9-20 Valve,Loader, Control 3 Spool, With Shovel Regen
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
| 25***60 | Valve, 3 Spool | 1 |
E3-10-4 Valve,Aux Relief, Utility
| 25***75 | Kit, Seal | 1 |
| 25***05 | Valve, Relief | 2 |
E3-8-1 Valve,Hitch, Control,Utility
| 13***10 | Screw, Cap | 1 |
| 13***12 | Capscrew | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-14-1 Valve,Steering, Assembly
| 16***53 | Adaptor; O Ring 24***06 | 2 |
| 24***03 | O Ring | 1 |
| 24***06 | O Ring | 1 |
E3-9-30 Valve,Loader, Control 3 Spool, Shovel Reset (Electric) With Regen
| 13***1Z | Nut | 1 |
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
E3-16-1 Valve, Steering Mode, With No Crab
| 13***20 | Capscrew | 2 |
| 14***7Z | Washer, Spring | 2 |
| 25***67 | Valve, Steer Mode, No Crab; Oil Control. For Vickers See Page E3-16-1. Check Part Number And Manufactuer Of Valve Fitted To Machine Before Ordering Parts, Valve, Steer Mode, No Crab | 1 |
E3-13-3 Valve,Section, Loader Lift, Mechanical Detent-Float
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 2 |
| 25***78 | Valve, Section, Mechanical Detent | 1 |
E3-13-5 Valve Section, Shovel, No Detent/Reset With Regen
| 25***70 | Valve, Section,With Regen, No Detent | 1 |
| 25***01 | Screw | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-17-1 Valve, Solenoid
| 25***82 | Solenoid, Coil Only | 1 |
| 25***53 | Valve, Solenoid | 1 |
| 92***84 | Valve Solenoid, (No Coil) | 1 |
E3-13-11 Valve,Section, Loader Aux, Mechanical Detent
| 25***52 | Spool, End | 1 |
| 25***54 | Cap, Detent | 1 |
| 25***01 | Screw | 2 |
E3-12-1 Valve,Section, Hitch Lift, Utility
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 1 |
| 25***56 | Valve Section | 1 |
E3-10-5 Valve,Main Relief, Loader
| 25***02 | Valve, Relief Mrv, 3300psi | 1 |
| 25***32 | Kit-Repair | 0 |
E3-7-2 Valve,Excavator, Jcb Control, 7 Spool
| 13***0Z | Capscrew | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
| 16***53 | Adaptor; O Ring 24***06 | 2 |
E3-3-1 Lubricants & Filters, Jcb 444 Engines
| 32***01 | Element, Air Filter, Main | 1 |
| 32***02 | Element, Air Filter, Safety | 1 |
| 32***00 | Element, Suction | 1 |
E3-9-41 Valve,Loader, Control 3 Spool, Shovel Reset/Aux Detent & Shovel Regen
| 13***1Z | Nut | 1 |
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
E3-9-10 Valve,Loader, Control 2 Spool, With Shovel Regen
| 25***24 | Cover, Hpco, Auxiliary Valve | 1 |
| 25***25 | Inlet Cover | 1 |
| 25***59 | Valve, 2 Spool | 1 |
E4-6-10 Ram, Dipper, 10'0" Excavator End, With Hbcv
| 13***3Z | Bolt, M8 X 55 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 22***18 | Clip, Jubilee, 130-152mm | 1 |
E4-16-1 Ram, Quickhitch, Shovel
| 53***01 | Cylinder, (1/4 Bsp Ports) | 1 |
| 53***02 | Cap, End | 1 |
| 53***03 | Piston | 1 |
E4-16-2 Ram, Quickhitch
| 33***47 | Cylinder | 1 |
| 53***02 | Cap, End | 1 |
| 53***03 | Piston | 1 |
E4-6-2 Ram, Dipper, 12'0" Excavator End
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***81 | Ram, Dipper, Complete, 90 X 50 | 1 |
| 55***88 | Ram, Dipper, 90 X 50 | 1 |
E4-8-2 Ram, Loader Lift Ram
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 33***42 | Endcap Assembly, 70 X 40 | 1 |
E4-5-1 Ram, Clamshovel, 6 In 1
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***21 | Ram, Clamshovel; Replaced By 99***84, See San 13446 | 1 |
| 55***21 | Cylinder | 1 |
E4-17-1 Ram, Sidetip Shovel
| 33***83 | Ram | 1 |
| 33***15 | Cylinder, Body | 1 |
| 33***16 | Piston Rod | 1 |
E4-1-1 Hydraclamp
| 13***3Z | Bolt, M24 X 130 | 8 |
| 13***1Z | Nut, M24 | 8 |
| 14***59 | Piston | 4 |
E4-2-21 Ram, Boom, With Hbcv
| 12***52 | Pipe, Boom Ram, Hbcv | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E4-4-2 Ram, Bucket
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-13-1 Ram, Stabiliser, Sideshift
| 55***46 | Ram, Stabiliser,60x40 | 1 |
| 55***46 | Cylinder | 1 |
| 59***75 | Rod, Piston 40mm Dia | 1 |
E4-2-2 Ram, Boom
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***82 | Ram, Boom, Complete, 90 X 50 | 1 |
| 55***89 | Ram, Boom 90 X 50 | 1 |
E4-11-20 Ram, Shovel, With Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-14-1 Ram, Steering, Front
| 12***47 | Ram, Steer Assembly; As 55***26 But Painted Black | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***26 | Ram, Steer Assembly | 1 |
E4-11-11 Ram, Shovel, Without Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-9-1 Ram, Lift, 3 Point Hitch
| 12***11 | Bush | 2 |
| 90***00 | Ram, 3 Point Lift, Rear Hitch | 1 |
| 90***58 | Rod, Piston | 1 |
E4-8-1 Ram, Loader Lift Ram, 70 X 40
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***68 | Ram, Lift, 70x40 | 2 |
E4-6-20 Ram, Dipper, 12'0" Excavator End, With Hbcv
| 13***3Z | Bolt, M8 X 55 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 22***18 | Clip, Jubilee, 130-152mm | 1 |
E4-10-1 Ram, Pitch & Tilt, 3 Point Hitch
| 90***00 | Ram, Hydraulic, Pitch | 1 |
| 90***00 | Ram, Hydraulic,Tilt | 1 |
| 90***56 | Rod, Piston | 1 |
E4-7-1 Ram, Extension, Extending Dipper, 10' & 12'
| 55***63 | Ram, Assembly Dipper | 1 |
| 55***63 | Cylinder | 1 |
| 59***22 | Rod, Piston | 1 |
E4-11-10 Ram, Shovel, Without Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-12-1 Ram, Slew/Swing
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 22***20 | Circlip | 1 |
| 55***20 | Spacer | 1 |
E4-6-1 Ram, Dipper, 10'0" Excavator End
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 23***55 | O Ring | 1 |
| 55***89 | Ram, Dipper,Complete, 90 X 50 | 1 |
E4-15-1 Ram, Steering, Rear
| 12***52 | Ram, Steer Assembly; As 55***39 But Painted Black | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***39 | Ram, Steer Assembly | 1 |
E4-8-5 Ram, Lift, Left & Right Hand, 70 X 50
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***57 | Ram, Lift, 70x50 | 2 |
E4-4-1 Ram, Bucket
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-2-20 Ram, Boom, With Hbcv
| 12***52 | Pipe, Boom Ram, Hbcv | 1 |
| 33***34 | Bracket | 1 |
| 33***36 | Pipe | 1 |
E4-11-21 Ram, Shovel, With Shovel Reset
| 12***15 | Bush | 2 |
| 14***01 | Washer, Aluminium | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F Axles, Wheels & Transmission
F1-5-1 Differential, Assembly, Maxtrac, 16.2 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
| 44***60 | Differential, Assembly | 1 |
F1-1-1 Axle Assembly, Front,Maxtrac 16.2 : 1, 18" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-5-4 Differential, Assembly, Lsd, 18.6 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 44***60 | Differential, Complete | 1 |
F1-7-1 Shaft, Drive
| 91***04 | Shaft, Drive Assembly, Btb320 | 1 |
| 91***05 | Shaft, Drive Assembly | 1 |
| 91***55 | Shaft | 1 |
F1-2-1 Axle Assembly, Front,Lsd 16.2 : 1, 18" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-2-3 Axle Assembly, Front,Lsd 15.78 : 1, 18" Wheels 448/58250
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-2-2 Axle Assembly, Front,Lsd 18.6 : 1, 20" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-1-0 Axle Assembly, Serial No, Identification Information
F1-5-5 Differential, Assembly, Maxtrac, 15.78 : 1 Ratio, Axle 448/58240
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
| 45***00 | Yoke | 1 |
F1-4-1 Hub & Components, Front Axle
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***21 | Carrier, Planetary Hub, Black | 2 |
F1-5-6 Differential, Assembly, Lsd, 15.78 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 45***00 | Yoke | 1 |
F1-6-2 Differential, Components Lsd
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F1-6-1 Differential, Components, Maxtrac
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Case | 1 |
F1-5-3 Differential, Assembly, Lsd, 16.2 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Casing, Outer | 1 |
| 44***50 | Differential, Complete | 1 |
F1-1-3 Axle Assembly, Front, 15.78 : 1, Maxtrac,18" Wheels,448/58240
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-3-1 Knuckle, Steering, Front Axle
| 13***9Z | Bolt | 16 |
| 45***02 | Carrier, Annulus Ring | 2 |
| 45***03 | Plate, Retaining | 2 |
F1-1-2 Axle Assembly, Front,Maxtrac 18.6 : 1, 20" Wheels
| 13***9Z | Screw, M10x35mm | 1 |
| 13***5Z | Bolt | 3 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
F1-8-1 Axle Pivot Pin, & Greasing, Aws
| 12***23 | Adhesive, Washer | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***3Z | Nut, M12 | 1 |
F1-5-2 Differential, Assembly, Maxtrac, 18.6 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
| 44***90 | Differential, Assembly, Complete | 1 |
F2-5-4 Drivehead Assembly, Lsd 18.6 : 1
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F2-2-2 Axle Assembly, Rear,Lsd 18.6 : 1, 20" Wheels
| 13***5Z | Bolt | 4 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-1 Hub & Components, Rear Axle
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***21 | Carrier, Planetary Hub, Black | 2 |
F2-5-3 Drivehead Assembly, Lsd 16.2 : 1
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F2-6-2 Differential, Components Lsd
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F2-5-6 Drivehead Assembly, Lsd 15.78 : 1
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F2-1-2 Axle Assembly, Rear,Maxtrac 18.6 : 1, 20" Wheels
| 13***5Z | Bolt | 4 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-3-1 Knuckle, Steering, Rear Axle
| 13***9Z | Bolt | 16 |
| 45***02 | Carrier, Annulus Ring | 2 |
| 45***03 | Plate, Retaining | 2 |
F2-5-1 Drivehead Assembly, Maxtrac 16.2 : 1
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F2-1-1 Axle Assembly, Rear,Maxtrac 16.2 : 1, 18" Wheels
| 13***5Z | Bolt | 4 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-5-5 Drivehead Assembly, Maxtrac 15.78 : 1, 448/58230 Axle
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F2-1-0 Axle Assembly, Serial No, Identification Information
F2-1-3 Axle Assembly, Rear,Maxtrac 15.78 : 1, 18" Wheels
| 13***5Z | Bolt | 4 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-2-3 Axle Assembly, Rear,Lsd 15.78 : 1, 18" Wheels 448/58260
| 13***5Z | Bolt | 4 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-2-1 Axle Assembly, Rear,Lsd 16.2 : 1, 18" Wheels
| 13***5Z | Bolt | 4 |
| 13***5Z | Bolt, M12 X 65mm | 12 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-7-1 Shaft, Drive
| 91***57 | Shaft, Drive | 1 |
| 91***58 | Shaft, Drive | 1 |
| 91***56 | Yoke | 2 |
F2-5-2 Drivehead Assembly, Maxtrac 18.6 : 1
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***20 | Circlip | 6 |
F2-6-1 Differential, Components, Maxtrac
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Case | 1 |
F3-2-4 Wheels & Tyres, 12.5/80x18x10, Goodyear Industrial Sgl
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***94 | Wheel, Assembly, 12.5/80x18x10pr | 4 |
F3-2-7 Wheels & Tyres, 12.5x20x10, Goodyear Ind Mpt
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***88 | Wheel, Assembly, 12.5x20x10pr | 4 |
F3-2-5 Wheels & Tyres, 12.5x18x10, Firestone Ind Traction Stl
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***96 | Wheel, & Tyre Assembly, 12.5x18x10 Firestone | 4 |
F3-2-15 Wheels & Tyres, 340/65 R18, Goodyear Industrial Fs24 Radial
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***31 | Stop, Axle | 0 |
F3-2-14 Wheels & Tyres, 405/70 R20, Michelin Traction Xm27
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***85 | Wheel, Assembly, 40***20 | 4 |
F3-1-5 Propshafts, Transmission, Airmaster
| 11***24 | Strap, Bearing | 2 |
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
F3-2-3 Wheels & Tyres, 12.5/80x18x10, Goodyear Traction Sgi
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***20 | Wheel, Assembly, 12.5/80x18x10pr | 4 |
F3-2-13 Wheels & Tyres, 340/80 R18, Goodyear Ind It530
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***18 | Wheel, & Tyre Assembly Goodyear, 34***18 Industrial | 4 |
F3-2-8 Wheels & Tyres, 14.5/80x18, Continental Imp E7
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***31 | Wheel, Assembly, 14.5/80x18 | 4 |
F3-2-1 Wheels & Tyres, 12.0/12.5x18x12, Firestone Ind Haul Champion
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***30 | Wheel, Assembly, 12.0/12.5x18x12pr | 4 |
F3-2-12 Wheels & Tyres, 335/80 R18, Michelin Traction Xm27
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***97 | Wheel, & Tyre Assembly, 335x18 R Michelin | 4 |
F3-2-6 Wheels & Tyres, 12.5x20x10, Firestone Ind Traction Stl
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***87 | Wheel, Assembly, 12.5x20x10pr | 4 |
F3-2-11 Wheels & Tyres, 340/65 R18, Michelin Traction Xp27
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***29 | Wheel, Assembly, 33***18 | 4 |
F3-1-1 Propshafts, Transmission
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-2-2 Wheels & Tyres, 12.5/80x18x10, Continental Imp As Farmer
| 10***01 | Nut | 20 |
| 33***25 | Wheel, Assembly, 12.5/80x18x10pr | 4 |
| 33***31 | Stop, Axle | 0 |
F3-2-9 Wheels & Tyres, 14.5x20x10, Continental Ind E58 Mpt
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***86 | Wheel, Assembly, 14.5x20x10pr | 4 |
F3-2-10 Wheels & Tyres, 15.5/55 R18, Dunlop Traction Mpt
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 33***24 | Wheel, Assembly, 15.5/55r18 | 4 |
F3-2-16 Wheels & Tyres, 400/70 R20, Michelin Traction Xmcl
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 14***08 | Stop | 0 |
F3-1-10 Propshafts, Transmission, Utility
| 11***24 | Strap, Bearing | 2 |
| 11***25 | Strap | 6 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
F5-2-1 Torque Converter, Drive Plate
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***03 | Bolt | 6 |
| 04***00 | Converter, 2.78:1 Ratio, 1 Yellow 1 Pink Spot | 1 |
F5-8-1 Transmission, Mounting
| 13***9Z | Bolt, M10 X 35 | 8 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F5-3-3 Transmission Assy, Jcb Syncro Shuttle, 30kph 67hp
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-3-4 Transmission Assy, Jcb Syncro Shuttle, 30kph, Airmaster
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***9Z | Bolt, M10x90mm | 7 |
F5-5-3 Transmission, Driveshafts, Internal, 30kph
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-0-5 Mounting, Transmission, To Engine
| 12***95 | G.A, Fastners Eng To G/Bo | 1 |
| 13***9Z | Screw, M10x35mm | 12 |
F5-1-1 Clutch, Pto
| 44***06 | Plate, Friction | 7 |
| 44***07 | Plate, Counter | 6 |
| 44***00 | Housing | 1 |
F5-1-3 Clutch, Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-5-4 Transmission, Driveshafts,Internal, 30kph, Pto
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-1-10 Clutch, Pto Feed Pipe
| 14***11 | Seal, Bonded | 3 |
| 44***04 | Adapter, Tee | 1 |
| 44***05 | Adapter | 1 |
F5-6-3 Transmission, Gear Components, Pto Engine Driven,20 & 30kph
| 45***79 | Gear, Engine Driven, 40t | 1 |
| 46***08 | Washer | 2 |
| 82***75 | O Ring, 50mm I/D | 1 |
F5-5-1 Transmission, Driveshafts,Internal, 20kph Non Pto
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-4-1 Transmission, Dipstick
| 12***43 | Bracket, Mounting,Filler Tube | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 15***00 | Nut, Sealastic | 1 |
F5-7-1 Transmission, Gearchange
| 13***7Z | Bolt, Coated | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***22 | Lever, Gear Shift | 1 |
F5-6-2 Transmission, Gear Components, Output, 30kph
| 44***03 | Yoke, Coupling | 2 |
| 44***02 | Gear, Output Shaft, Ss400, 37t | 1 |
| 45***20 | Disc, Brake | 1 |
F5-2-2 Torque Converter, Drive Plate
| 04***03 | Bolt | 6 |
| 04***00 | Converter, 2.83:1 Ratio | 1 |
| 04***02 | Bolt, M8 X 20 | 6 |
F5-3-5 Transmission Assy, Jcb Syncro Shuttle, 30kph, Pto
| 13***9Z | Screw, M10x35mm | 31 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-2-3 Torque Converter, Drive Plate, Sales Specials, See Item 1 For S/Nos
| 04***03 | Bolt | 6 |
| 04***00 | Converter, 2.44:1 Ratio, 2 Orange 1 Green; Sales Special Fitment. Fitted To:M1332202,M1334174,M1334403,M1336600,M1336687,M1336888, Converter, 2.44:1 Ratio, 2 Orange 1 Green | 1 |
| 04***02 | Bolt, M8 X 20 | 6 |
F5-3-1 Transmission Assy, Jcb Syncro Shuttle, 20kph
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-5-2 Transmission, Driveshafts,Internal, 20kph, Pto
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-1-2 Clutch, Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-3-6 Transmission Assy, Jcb Syncro Shuttle, 30kph 75hp
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-6-1 Transmission, Gear Components, Output, 20kph
| 44***03 | Yoke, Coupling | 2 |
| 44***25 | Spacer | 1 |
| 44***01 | Gear, Output Shaft, Ss400, 43t | 1 |
F5-3-2 Transmission Assy, Jcb Syncro Shuttle, 20kph, Pto
| 13***9Z | Screw, M10x35mm | 31 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-6-4 Transmission, Gear Components, Pto Transfer Box
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 9 |
| 13***28 | Capscrew | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
F5-6-5 Transmission, Gear Components, Pto Output Drive,20 & 30kph
| 21***04 | Dowel | 3 |
| 22***76 | Circlip | 1 |
| 25***90 | Valve, Solenoid, 4 Way | 1 |
F5-1-4 Clutch, Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 10 |
| 44***09 | Washer, Thrust | 2 |
G Brakes
G1-1-1 Brake,System
| 12***42 | Seal, Splash Guard | 1 |
| 12***54 | Pipe, Left Hand Rear | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
G1-4-1 Brake, Pedal, & Mounting
| 12***01 | Plate, Lock | 1 |
| 12***05 | Pin, Pivot, Brake Pedal | 1 |
| 13***3Z | Screw, M6x16 | 1 |
G1-3-1 Brake Components, Axle Rear
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***04 | Pin, Brake Back Off | 6 |
G1-5-1 Brake, Parking, Transmission, 15/920269
| 15***03 | Kit-Pad, Brake Pad | 1 |
| 15***69 | Caliper, Parkbrake, Hayes, Booted | 1 |
| 15***89 | Kit-Bolt, Torx Head | 1 |
G1-1-2 Brake,System
| 12***42 | Seal, Splash Guard | 1 |
| 12***54 | Pipe, Left Hand Rear | 1 |
| 12***56 | Cover, Brake Reservoir | 1 |
V Jcb444 Engine Installation, Components
V41-1-1 Engine Assembly, 320/40087, 74bhp, See Catalogue 9802/2910
| 12***93 | I.A, Engine N/Ap 75hp, Scout | 1 |
| 12***42 | I.A, Engine Aws 75hp 95a, None Exc. | 1 |
| 32***87 | Engine, Assembly 74bhp-12v, Nat/Asp 11"T/C | 1 |
V42-1-1 Engine Mountings
| 12***78 | G.A, Mounts Engine Aws | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 5 |
| 13***0Z | Bolt, M10 X 40 | 8 |
V43-1-1 Filter, Air
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
V44-1-1 Air Induction Hoses
| 12***91 | G.A, Induction Hose | 1 |
| 12***01 | I.A, Air Induction, Rain Cap 2cx Scout | 1 |
| 12***17 | I.A, Air Induction, Pre-Cleaner 2cxscout | 1 |
V44-2-1 Rain Cap, Installation
| 12***17 | G.A, Sealing Plate, 2cx Mkiii | 1 |
| 12***92 | G.A, Rain Cap, 2cx Scout | 1 |
| 12***01 | I.A, Air Induction, Rain Cap 2cx Scout | 1 |
V44-3-1 Pre-Cleaner, Installation
| 12***17 | G.A, Sealing Plate, 2cx Mkiii | 1 |
| 12***06 | G.A, Pre-Cleaner, 2cx Scout | 1 |
| 12***17 | I.A, Air Induction, Pre-Cleaner 2cxscout | 1 |
V45-2-1 Silencer & Extension
| 02***16 | Nut | 1 |
| 12***70 | G.A, Silencer N/Asp | 1 |
| 12***24 | G.A, Extension Exhaust, 2cx Mkiii | 1 |
V45-1-1 Silencer & Extension
| 02***16 | Nut | 4 |
| 12***81 | G.A, Extension Nat Asp, 2cx Mkiii | 1 |
| 12***79 | G.A, Silencer N/Asp, 2cx | 1 |
V46-2-1 Fan Guards
| 12***62 | Washer, Spreader | 6 |
| 12***92 | G.A, Fan Guard, 2cx Scout | 1 |
| 12***82 | Guard, Fan, Left Hand | 1 |
V46-1-1 Radiator, Fittings & Mountings
| 12***62 | Washer, Spreader | 6 |
| 12***11 | G.A, Hoses Cooling, 2cx Mkiii | 1 |
| 12***12 | G.A, Anti Recirculation, 2cx Mkiii | 1 |
V47-2-1 Combination Cooler, Assembly
| 12***64 | Combination, 4row Rad/9+16 Cooler | 1 |
| 12***23 | I.A, Cooling 0.85 Aws, 2cx Airmaster | 1 |
| 12***24 | G.A, Cooler Airmaster, 2cx | 1 |
V47-1-1 Combination Cooler, Assembly
| 12***65 | Combination Assembly, 4row Rad/9+16 Cooler | 1 |
| 12***86 | G.A, Cooling Pack 2cx, B/Hoe & Utility | 1 |
| 12***07 | I.A, Cooling 0.85, 2cx | 1 |
V48-1-1 Radiator & Hoses
| 12***96 | Tank, Coolant Expansion | 1 |
| 12***87 | G.A, Top Hose, 2cx | 1 |
| 12***88 | G.A, Bottom Hose, 2cx | 1 |
V49-30-1 Cooling Fan & Spacer, C/W Viscous Coupling
| 12***97 | Fan, & Viscous Coupling, Assembly | 1 |
| 12***47 | G.A, Fan Drive 20" | 1 |
| 12***68 | I.A, Fan Vc 2cx 1.16 A | 1 |
V49-4-1 Front End Drive, Accessory, With Cooling Fan & Air Conditioning
| 12***67 | I.A, Fan Dd 2cx 1.00 A | 1 |
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***30 | Pulley, Idler, Long | 1 |
V49-3-1 Front End Drive, Accessory, With Cooling Fan
| 12***31 | I.A, Fan Dd 2cx 1.00 | 1 |
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***41 | Screw, Pan Head, M8 X 20 | 1 |
V49-6-2 Front End Drive, Accessory, With Viscous Cooling Fan & Aircon
| 12***64 | I.A, Cooling 1.16 2ws, Scout | 1 |
| 12***70 | I.A, Cooling 1.16 Aws, Scout | 1 |
| 12***92 | I.A, Fan 1.16 2ws D/D | 1 |
V49-1-1 Cooling Fan & Spacer
| 12***47 | G.A, Fan 20" 2ws | 1 |
| 12***25 | I.A, Fan Dd 2cx 0.85 | 1 |
| 12***31 | I.A, Fan Dd 2cx 1.00 | 1 |
V49-2-1 Front End Drive, Accessory, With Cooling Fan
| 12***07 | I.A, Cooling 0.85, 2cx | 1 |
| 32***00 | Hub, Fan Drive, Assembly | 1 |
| 32***02 | Pulley, 0.85:1 Ratio | 1 |
V49-20-1 Lower Idler Pulley, Small
| 12***07 | I.A, Cooling 0.85, 2cx | 1 |
| 12***25 | I.A, Fan Dd 2cx 0.85 | 1 |
| 12***31 | I.A, Fan Dd 2cx 1.00 | 1 |
V50-2-1 Fuel Pipes, Fuel Tank To Filter
| 12***65 | G.A, Circuit Diesel | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
V50-1-1 Fuel Pipes, Fuel Tank To Filter
| 12***82 | G.A, Sedimenter 214e/3c, 2cx Scout | 1 |
| 12***32 | G.A, Fuel System, 2cx Scout | 1 |
| 12***27 | G.A, Fuel System, With Ptc 2cx Scout | 1 |
V51-2-1 Filter, Fuel Sediment, Cold Climate
| 32***05 | Element, Fuel Sediment/Water, 150 Microns | 1 |
| 32***33 | Seal, O'Ring | 1 |
V51-1-1 Filter, Fuel Sediment
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
| 32***94 | Element, Fuel Filter | 1 |
V51-4-1 Filter, Fuel Sediment, Cold Climate
| 32***33 | Seal, O'Ring | 1 |
| 32***75 | Element, Fuel Filter, 150micron Rev/Flow | 1 |
V51-3-1 Filter, Fuel Sediment
| 12***66 | G.A, Fuel Sedimenter | 1 |
| 32***02 | Ring, Retaining | 1 |
| 32***03 | Seal, Dust | 1 |
V55-1-1 Oil Level Dipstick, & Tube, Standard
| 12***93 | I.A, Engine N/Ap 75hp, Scout | 1 |
| 12***42 | I.A, Engine Aws 75hp 95a, None Exc. | 1 |
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
V55-1-2 Oil Level Dipstick, & Tube, Long
| 12***93 | I.A, Engine N/Ap 75hp, Scout | 1 |
| 12***42 | I.A, Engine Aws 75hp 95a, None Exc. | 1 |
| 13***5Z | Bolt, Flange Head, M8 X 20 Lg | 1 |
V56-1-1 Compressor, Air Conditioning
| 12***67 | I.A, Fan Dd 2cx 1.00 A | 1 |
| 12***68 | I.A, Fan Vc 2cx 1.16 A | 1 |
| 13***0Z | Bolt, Star Drive, M8 X 100mm | 3 |
V57-1-1 Engine Oil Drain
| 12***79 | G.A, Drain Engine Sump, Scout | 1 |
| 25***62 | Plug, Oil Drain | 1 |
| 33***28 | Tube, Oil Sump Drain | 1 |
Frequently asked questions
What engine does the JCB 2CX 12 use?
The JCB 2CX 12 uses a 4-cylinder JCB Dieselmax or EcoMAX engine with a net power output of 53.91 kW (72 hp).
What is the operating weight of the JCB 2CX 12?
The operating weight varies by configuration, ranging from 6,200 kg (13,669 lb) to 6,355 kg (14,010 lb).
What model replaced the JCB 2CX?
The JCB 3CX series succeeded the 2CX in the mid-size backhoe loader lineup, offering increased power and capacity.
Need a specific 2CX 12 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.