JCBconstructionfastrac
Jcb 2155
Maintenance schedule, common problems & OEM parts breakdown
The JCB 2155 is a high-speed 4-wheel drive agricultural tractor manufactured by JCB from 2007 to 2014. It belongs to the Fastrac series, replacing the JCB Fastrac 2150. The machine weighs approximately 7.3 tonnes and is powered by an 11-liter turbocharged diesel engine producing 119 kW (160 hp) to 179 kW (240 hp) depending on the specific configuration and market. It features a transmission with 54 forward and 18 reverse speeds, allowing travel speeds up to 60 km/h. Configurations include the standard 4WD and the 4WS (Four-Wheel Steering) variant. The 2155 is part of the JCB Fastrac line, which succeeded earlier high-speed tractor models and was later joined by the 3155 and 3185 in the same generation.
Across the Fastrac generation, the 2155 maintained JCB's focus on road-legal high-speed transport combined with field utility. The machine matters in the used and parts market because its Dieselmax engine does not require Diesel Exhaust Fluid (DEF) or a Diesel Particulate Filter (DPF), simplifying maintenance compared to newer Tier 4/Stage V engines. The 2155 shares many components with the 2170 and earlier 2150 models, creating a robust supply chain for used parts. Its 500-hour engine oil interval reduces operating costs, making it a cost-effective option for contractors and farmers seeking reliable, simpler agricultural machinery.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 2155 specifications
Engine
| Model | Cummins QSB 6.7 |
| Gross Power | 119 kW (160 hp) |
| Displacement | 6702 cm³ |
| Cylinders | 6 |
| Emissions Tier | Tier 4 Final / Stage V |
Weights
| Operating Weight | 7300 kg (16,094 lb) |
Dimensions
| Transport Length | 5.21 m (17.09 ft) |
| Transport Width | 2.35 m (7.71 ft) |
| Transport Height | 2.88 m (9.45 ft) |
| Wheelbase | 2.946 m (9.67 ft) |
| Ground Clearance | 464 mm (18.3 in) |
Performance
| Travel Speed | 60 km/h (37.28 mph) |
Service capacities (summary)
| Fuel Tank | 330 L (87.2 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 2155 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 2155 beyond the schedule
Predictive Maintenance & Fluid Analysis
At the 500-hour interval, take oil samples from the engine, hydraulic tank, and axle systems to establish a baseline. JCB extends engine oil intervals to 500 hours on its Dieselmax engines because they do not use DEF or DPF regen. Monitor hydraulic fluid for contamination by inspecting the magnet in the return filter. Use JCB Advanced engine oil or equivalent 15W-40 diesel oil meeting API specifications. Regular fluid analysis prevents catastrophic bearing and seal failures by detecting wear metals early.
Corrective & Common Repairs
Common repairs on the JCB 2155 include replacing the primary and secondary fuel filters to protect common-rail injectors. Inspect the alternator and fan belts for tension and cracking during every 250-hour service. Check the hydraulic hoses and cylinder rods for chafing or pinhole seepage, particularly at the kingpost and boom pivots. Replace the hydrostatic steering oil filter every 1,200 hours. Addressing these items promptly prevents loss of hydraulic pressure and engine overheating.
Overhaul & Rebuild Points
The 2,000-hour service is the critical overhaul point for the JCB 2155. Drain and clean the hydraulic tank completely before refilling with JCB-spec hydraulic oil. Inspect the structural frame, boom, and loader arm for cracks or unauthorized welding. Measure swing ring play if equipped with excavator attachments. Check injector spray patterns using a JCB ServiceMaster diagnostic tool. Replace the cab HVAC cabin filter and service the A/C pressure. This deep service determines if the machine can continue reliable operation for another five years.
Seasonal & Environment Servicing
Before winter, check the coolant mixture and pressure test the cooling system to prevent catastrophic engine damage. Inspect the battery electrolyte levels in non-sealed units and clean terminals. In dusty environments, clean the radiator and oil cooler fins frequently to maintain engine temperature. Check track tension on undercarriage components to prevent accelerated wear. Store the machine under cover when possible to reduce corrosion on hydraulic cylinders and electrical connections.
2155 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/925763 | Element, Fuel Water/Sediment, Filter Cartridge | Fuel system service | Check fitment → |
| 02/912540 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 32/925922 | Adapter, Fuel Filter | Fuel system service | Check fitment → |
| 332/U7903 | Filter, Fuel Sediment, Assembly Abi | Fuel system service | Check fitment → |
| 478/02221 | Grille, Air/Con Filter | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
2155 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Leaking fuel lines, faulty lift pump, or clogged fuel filter | Check fuel filter condition and inspect fuel lines for leaks |
| P0088 | Fuel rail/system pressure too high | Faulty fuel pressure regulator or restricted return line | Inspect fuel pressure regulator operation and return line flow |
| P0115 | Engine coolant temperature sensor circuit malfunction | Failed coolant temperature sensor or wiring harness issue | Test sensor resistance and inspect connector for corrosion |
| P0117 | Engine coolant temperature sensor low input | Short to ground in sensor circuit or open sensor | Check sensor wiring continuity and ground connection |
| P0118 | Engine coolant temperature sensor high input | Open circuit in sensor wiring or failed sensor | Verify sensor power supply and signal return path |
| P0200 | Injector circuit malfunction | Open or shorted injector wiring harness | Inspect injector connectors and wiring for damage |
| P0201 | Injector circuit malfunction - Cylinder 1 | Failed injector or open circuit in cylinder 1 injector line | Swap injector with another cylinder to isolate fault |
| P0261 | Cylinder 1 contribution/balance low | Restricted fuel injector or poor cylinder performance | Perform injector balance test and inspect injector nozzle |
| P0264 | Cylinder 2 contribution/balance low | Restricted fuel injector or poor cylinder performance | Perform injector balance test and inspect injector nozzle |
| P0267 | Cylinder 3 contribution/balance low | Restricted fuel injector or poor cylinder performance | Perform injector balance test and inspect injector nozzle |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
2155 attachments & work tools
Agricultural Implements
The JCB Fastrac 2155 is a high-speed agricultural tractor manufactured from 2007 to 2014. It utilizes a three-point hitch system for mounting implements, with a bridge length of 1.73 m (5.68 ft) and a bridge width of 2.37 m (7.78 ft). Compatible tools include grain shovels with various widths and pick-up options, grain pushers, and power grabs designed for silage handling.
Front-End Loaders
The machine is equipped with front tyres sized 540/65 R30 and rear tyres sized 540/65 R30 (or 480/80 R24 depending on configuration). Loader buckets for this class typically range from 1.5 to 2.5 m³ (1.96 to 3.27 cu yd) capacity, designed for material handling and loading operations compatible with the tractor's hydraulic system.
Rear-Mounted Equipment
The service manual for the Fastrac 2155 includes Section A dedicated to attachments, indicating provisions for rear-mounted tools. Typical rear attachments for this weight class (7.3 tonnes) include counterweights, snow ploughs, or specialized agricultural rear implements requiring hydraulic connectivity.
Hydraulic & Coupling Systems
The 2155 features a hydraulic system requiring specific fluid maintenance as outlined in the service manual. Implement compatibility relies on standard JCB hydraulic couplers and three-point linkage geometry. Hydraulic kit requirements vary by attachment type, with some tools requiring dual-flow circuits for operation.
All 2155 assemblies by section
Every catalogued assembly group for the Jcb 2155. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2D | Setscrew | 8 |
| 13***1D | Nut | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 8 |
A3-5-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-13-1 Top Link Assembly, Eye End, Cat Iii
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-20-1 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-15-1 Stabiliser, Standard Compression
| 33***96 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-12-1 Top Link Assembly, Eye End, Cat Ii
| 47***07 | Nipple, Grease | 2 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-23-1 Roller Drawbar, Heavy Duty, Australian & New Zealand Builds
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-13-2 Top Link Assembly, Hook End, Cat Iii
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
A3-22-2 Trailer Coupling,, Ladder Hitch, 38mm, Rockinger 840ra
| 47***15 | Nipple, Grease - Drive In | 2 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-2-1 Hitch Assembly, Front
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***4D | Bolt, M20 X 60mm | 8 |
| 13***8D | Bolt, M20 X 80mm | 2 |
A3-22-4 Trailer Coupling, Ladder Hitch, 274s, Rockinger
| 47***15 | Nipple, Grease - Drive In | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-4-1 Front Pto Frame, Utility
| 13***2D | Setscrew | 8 |
| 13***3D | Nut, M16 | 2 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 8 |
A3-22-1 Trailer Coupling,, Ladder Hitch, 30mm, Rockinger 850rb
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-19-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***91 | Pin, Retaining | 1 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-20-3 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-30-2 Rear Deck, Weight Carrier
| 13***5Z | Bolt, M12x20 | 2 |
| 13***3Z | Bolt | 4 |
| 13***9Z | Bolt | 4 |
A3-16-1 Lower Links, Cat 2
| 47***46 | Link, Assembly, Lower, Left Hand, Cat 2 | 1 |
| 47***47 | Link, Lower, Cat.2, Right Hand | 1 |
| 47***07 | Kit-Repair, Cat2 Link | 1 |
A3-17-1 Cat 2-3 Components
| 33***46 | G.A, Front Linkage Common, Parts | 1 |
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
| 47***07 | Ball, Cat 3-2 | 1 |
A3-10-2 Hitch, Rear, Linkage
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***9Z | Bolt, M20 X 90 | 3 |
| 13***0Z | Bolt, M20 X 100mm | 1 |
A3-15-2 Stabiliser, Short
| 33***97 | Stabiliser | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-13-3 Top Link Assembly, Hook End, Cat Iii
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
A3-11-1 Pickup Hitch
| 14***0Z | Washer, Plain | 4 |
| 14***2Z | Washer | 2 |
| 47***06 | Wire, Rope 250mm Long, Linch Pin Retaining | 4 |
A3-30-1 Rear Deck
| 13***1D | Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings., Setscrew, M16x45, Setscrew, M16x45; Dacromet (Silver) Finish. All Fasteners With A Suffix 'D' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***7D | Bolt, M8 X 75mm Long | 2 |
| 13***3D | Bolt, M16x130, Dacromet | 2 |
A3-12-2 Top Link Assembly, Hook End, Cat Ii
| 47***07 | Nipple, Grease | 2 |
| 47***07 | Pin, Tension | 3 |
| 47***05 | Handle | 1 |
A3-14-1 Lift Rod Assembly
| 47***07 | Nipple, Grease | 2 |
| 47***02 | Fork | 1 |
| 47***03 | Shaft | 1 |
A3-21-2 Ladder Hitch, Pto Drawbar, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-23-2 Roller Drawbar, Heavy Duty
| 13***1Z | Bolt, M20 X 110mm | 4 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M20 X 80 (10.9) | 2 |
A3-3-1 Front Lower Links, Cat 2
A3-21-3 Ladder Hitch, Pto Drawbar & Piton, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 5 |
A3-2-2 Front Din Plate, Weight Carrier, Single
| 48***72 | Pin, Lynch | 3 |
| 48***04 | Pin, Spiral | 4 |
| 48***05 | Pin, Locking | 2 |
A3-10-1 Hitch, Rear
| 13***5D | Setscrew, M8x20 | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-16-2 Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-20-2 P.T.O Drawbar, With Piton, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-21-4 Ladder Hitch, Pto Drawbar, Fixed Offsetable With Cushioning,Italian
| 13***4D | Bolt, M20 X 60mm | 4 |
| 13***9D | Bolt, M20 X 90, Dacromet | 4 |
| 13***0D | Bolt, M20 X 100 | 2 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 33***46 | G.A, Front Linkage Common, Parts | 1 |
A3-18-1 Drawbar,Assembly
| 13***7Z | Bolt, M10x25 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-22-3 Trailer Coupling,, Ladder Hitch, 38mm, Rockinger 860d
| 33***21 | Coupling, Trailer Towing, Rockinger 860d01 | 1 |
| 33***34 | Kit-Lever | 1 |
| 33***35 | Kit-Spring | 1 |
A3-12-3 Top Link Assembly, Hook End, Cat Ii
| 33***04 | Link, Top Assembly, Cat 3 Hook End | 1 |
| 33***55 | Yoke, Assembly | 1 |
| 33***56 | Yoke | 1 |
B Bodywork, Cab, Loader End
B1-1-11 Chassis Crossmember, Front, No Pto
| 13***3D | Bolt | 2 |
| 13***6D | Bolt | 2 |
| 13***3D | Nut, M16 | 4 |
B1-6-1 Fenders, Front
| 13***0D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 6 |
| 13***9D | Screw, M12x35mm Long | 4 |
B1-4-2 Toolbox
| 12***71 | Padlock | 1 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 4 |
B1-1-1 Chassis & Fittings
| 13***5D | Bolt | 4 |
| 13***6D | Bolt, M12x70 | 10 |
| 13***3D | Nut, M12 | 14 |
B1-6-4 Fender Extensions, Rear, Optional
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 2 |
| 13***2Z | Bolt, M16 X 50mm | 4 |
B1-2-1 Tank, Hydraulic, 2ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B1-2-2 Tank, Hydraulic, 4ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
B1-7-1 Quiet Build Kit
| 13***5Z | Bolt | 17 |
| 13***3Z | Nut, Self Lock, M6 | 8 |
| 14***1D | Washer, Large | 8 |
B1-1-12 Chassis Crossmember, Front, With Pto
| 13***0D | Bolt, M12 X 40 | 4 |
| 13***3D | Bolt | 2 |
| 13***6D | Bolt | 2 |
B1-6-3 Fender Extensions, Front, Optional
| 13***7Z | Screw, M6 X 25mm Long | 6 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 1 |
B1-4-3 Step, Cab Access, Left Hand
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***8D | Setscrew, M10 X 30 | 14 |
B1-4-1 Pannier Unit, Right Hand
| 13***7D | Setscrew, M8x25 | 13 |
| 13***7D | Setscrew, M10 X 25mm Long | 1 |
| 13***8D | Bolt, M8x30mm | 1 |
B1-3-1 Tank, Diesel Fuel
| 13***7D | Setscrew, M10 X 25mm Long | 4 |
| 13***8D | Setscrew, M10 X 30 | 9 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
B1-5-2 Bonnet & Fittings, Utility (Orange)
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-8-1 Light Mounting Bars
| 13***9D | Screw, M12x35mm Long | 8 |
| 13***3D | Nut, M12 | 8 |
| 14***9D | Washer, M12 | 16 |
B1-5-1 Bonnet & Fittings
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***3D | Setscrew, M8 X 16mm | 1 |
| 13***8D | Setscrew, M10 X 30 | 6 |
B1-6-2 Fenders, Rear
| 13***0D | Setscrew | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***8D | Setscrew, M10 X 30 | 8 |
B2-1-2 Cab Assembly, Utility (Orange)
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
| 33***33 | Roof, Cab, Without Hatch, Orange | 1 |
B2-4-10 332/R6196, Left Side, Door Gas Strut, Service Modification
| 13***1D | Setscrew, M8x45 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 33***15 | Clevis Pin | 1 |
B2-11-4 Seat Suspension Unit, High-Spec, Top
| 40***03 | Kit-Level Control | 1 |
| 40***04 | Kit-Upper Suspension | 1 |
| 40***05 | Kit-Lever Locking | 1 |
B2-11-6 Seat Suspension Unit, High-Spec, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-11-18 Seat Suspension, Kit Wear Parts, High Spec Heated
| 40***14 | Washer | 1 |
| 40***49 | Roller | 1 |
| 40***51 | Screw | 1 |
B2-10-3 Visor, Sun
| 33***72 | Visor, Sun | 1 |
| 47***55 | G.A, Cab Fittings | 1 |
| 82***72 | Screw, M5 X 16 | 3 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***1Z | Nut, M5-8 | 4 |
B2-4-21 Door, Left Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-9-3 Soundproofing, Cab Base
| 14***1D | Washer, Large | 22 |
| 14***2D | Washer, Large | 7 |
| 33***70 | Panel, Insulation, Floorplate, Left Side | 1 |
B2-9-2 Soundproofing, Cab Base
| 14***1D | Washer, Large | 27 |
| 14***2D | Washer, Large | 7 |
| 26***00 | Clip | 1 |
B2-11-1 Seats, Suspension, Installation
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut | 2 |
| 13***1Z | Nut, M8 | 2 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 12***31 | Vent, Air Register | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***5Z | Bolt | 0 |
B2-4-22 Door, Right Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-11-12 Seat, Suspension, High-Spec, Heated
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-10-1 Mirrors, External
| 13***7D | Setscrew, M8x25 | 6 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 14***7D | Washer, M8 Plain | 6 |
B2-11-5 Seat Suspension Unit, Standard, Top
| 40***05 | Kit-Lever Locking | 1 |
| 40***06 | Kit-Isolator | 1 |
| 40***07 | Kit-Handle | 1 |
B2-2-1 Cab Shell, Hardware
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 2 |
| 13***3D | Nut, Self Lock M8 | 8 |
| 14***7D | Washer, M8 Plain | 8 |
B2-11-21 Seat, Passenger
| 40***14 | Washer | 2 |
| 40***86 | Kit-Headrest, Dynamic Yellow | 1 |
| 40***10 | Screw | 7 |
B2-11-16 Seat Suspension Unit, High-Spec, Bottom, Heated
| 40***14 | Washer | 2 |
| 40***22 | Bracket | 1 |
| 40***23 | Kit-Cable Connecting | 1 |
B2-9-1 Soundproofing, Cab
| 24***05 | Grommet | 1 |
| 24***12 | Grommet | 1 |
| 24***14 | Grommet | 1 |
B2-11-14 Seat Suspension Unit, High-Spec, Top, Heated
| 40***07 | Kit-Handle | 1 |
| 40***08 | Guide | 1 |
| 40***09 | Handle | 1 |
B2-3-2 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-3-1 Cab Glazing
| 33***38 | Glass, Rear Quarter Light, Left Hand | 1 |
| 33***10 | G.A, Parts To Complete, Cab Tier 3 | 1 |
| 33***72 | Glass, Front Windscreen | 1 |
B2-8-1 Ducts, Mouldings, Floormat & Covers, Fig.1
| 12***31 | Vent, Air Register | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***3Z | Screw, M6x16 | 20 |
B2-4-2 Door, Right Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-11-7 Seat Suspension Unit, Standard, Bottom
| 40***14 | Washer | 6 |
| 40***19 | Kit-Swing Arm | 1 |
| 40***20 | Kit-Air Spring | 1 |
B2-4-1 Door, Left Hand
| 12***69 | Bolt, Striker Assembly, Cab Door Lock | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 7 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
B2-1-1 Cab Assembly
| 13***0D | Bolt, M20 X 100 | 4 |
| 13***3D | Nut, M20, 2.5 Pitch; San 10***25 | 4 |
| 33***96 | Cab, Assembly, No Hatch A.B.I | 1 |
B2-11-3 Seat, Suspension, Standard
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-11-2 Seat, Suspension, High-Spec
| 40***11 | Kit-Slide Rails | 1 |
| 40***12 | Handle | 1 |
| 40***14 | Washer | 8 |
B2-4-12 332/R5667, Right Side, Door Gas Strut, Service Modification
| 13***1D | Setscrew, M8x45 | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 33***15 | Clevis Pin | 1 |
B2-8-2 Ducts, Mouldings, Floormat & Covers, Fig.2
| 13***5D | Screw, M5x20 | 7 |
| 14***5D | Washer | 7 |
| 26***01 | Net, Stowage | 1 |
B2-5-1 Window, Rear Opening
| 13***5D | Setscrew, M6 X 20mm Long | 6 |
| 13***3Z | Nut | 2 |
| 13***1D | Nut, Plain | 7 |
B2-10-2 Mirrors, External
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 47***65 | Arm, Mirror, Left Hand | 1 |
B2-12-1 Seat Belt
| 47***00 | Kit-Seat Belt, Lap Type, Kit-Seat Belt, Lap Type; Drivers Seat. Contains All Parts Necessary For Installation. | 2 |
| 47***00 | Kit-Seat Belt, Lap Type | 1 |
B2-6-2 Filter, Air Conditioning
| 32***00 | Filter, Carbon, Cab Intake | 1 |
| 32***00 | Filter, Air | 1 |
| 47***77 | Filter, Air Conditioning | 1 |
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-1-1 Decals, External
| 13***3D | Nut, M6 Lock | 3 |
| 14***6D | Washer, M6 Plain | 3 |
| 33***58 | Decal, Speed 60kph | 1 |
B5-10-1 Lubricants & Filters
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***91 | Element, Hydraulic Filter | 1 |
| 32***13 | Element, Engine Oil Filter, Cartridge | 1 |
B5-3-4 Homologation, Italian 40k
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***3D | Nut, Self Lock M8 | 1 |
| 13***3D | Nut, Self Lock M10 | 1 |
B5-5-1 Labels, Safety, Iso
| 33***60 | Label, Sheet, Fastrac Iso | 1 |
| 81***72 | Plate, Homologation | 1 |
| 81***38 | Decal, 40 Kph | 1 |
B5-2-1 Decals, Internal
| 33***52 | Decal, Speed 60km/H | 1 |
| 33***93 | Decal, Hydraulic Lever, 4 Spool | 1 |
| 81***39 | Label, Warning English, Read Operating Book | 1 |
B5-4-1 Decals, North American, Homologation
| 33***35 | Decal, Warning Trailer Towi, Trailer Towing | 1 |
| 33***03 | Decal, Warning, Read Manual | 1 |
| 47***30 | G.A, H/Book & Labels-Usa | 1 |
B5-6-1 Labels, Safety, Usa, Ansi
| 33***88 | G.A, Handbook & Labels, Ansi Safety Usa | 0 |
| 33***59 | Label, Sheet, Fastrac Ansi | 1 |
| 81***82 | Label, Warning, Drawbar | 1 |
B5-1-0 Identification, Serial Plates
C Electrics-Machine, Cab & Engine
C1-9-1 Horn, Single Tone
| 13***6Z | Bolt, M6x70 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***1Z | Washer | 2 |
C1-1-1 Battery & Carrier, Single
| 13***5D | Setscrew, M8x20 | 1 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 13***2D | Bolt | 1 |
C1-7-1 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-6-1 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C1-1-3 Earth Lead, Chassis To Engine
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 14***9D | Washer, M12 | 1 |
| 47***87 | G.A, Electrics-2170 S, T3 - Cummins 6.7l | 1 |
C1-3-2 Harnesses, Cab
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 24***14 | Grommet | 1 |
C1-4-2 Light, Head, Right Hand Dip
| 33***27 | G.A, Light - Rh Dip Ga | 1 |
| 70***94 | Light, Head 12v Assembly, R/H Dip L/H Mounted | 1 |
| 70***95 | Light, Head 12v Assembly, R/H Dip R/H Mounted | 1 |
C1-10-2 Radar Installation
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-3-10 Harness Assembly, Accessories
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 90 |
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***7D | Screw, M6 X 25mm | 1 |
C1-3-3 Harnesses, Edc
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***2Z | Nut, Thin M20 | 4 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
C1-10-1 Radar Installation
| 13***3D | Setscrew | 3 |
| 13***4D | Bolt, M10 X 60mm | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
C1-11-1 Harness Connectors, Sumitomo
| 72***16 | Terminal, Crimp | 2 |
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
C1-5-2 Light, Combination, Rear, Italian Homologation
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 48***39 | G.A, Rear Light Cluster, With Fog Light Op. | 1 |
| 48***98 | G.A, Electrics | 1 |
C1-3-6 7 Pin Trailer Socket, Single, Front
| 13***3D | Nut, Lock M5 | 3 |
| 13***5D | Capscrew, M5 X 65. 12.9 | 3 |
| 14***5D | Washer | 3 |
C1-4-1 Light, Head, Left Hand Dip
| 33***24 | G.A, Light - Lh Dip Ga | 1 |
| 70***92 | Light, Head 12v Assembly, L/H Dip L/H Mounted | 1 |
| 70***93 | Light, Head 12v Assembly, L/H Dip R/H Mounted | 1 |
C1-3-1 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***7D | Screw, M6 X 25mm | 1 |
| 13***8D | Bolt, M6 X 30 | 1 |
C1-3-11 Non Abs Axle, Electrics, Sealing Parts, ( Australian )
| 48***21 | G.A, Non Abs Sealing Part, Australian | 1 |
| 72***08 | Connector, Weatherpack Cavity, Seal, Green Packard | 13 |
| 72***54 | Housing, 2 Way Metripack, 150 Fm(Pin) | 1 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 1 |
| 32***30 | Indicator, Assembly | 1 |
| 33***52 | Boot, Warning Buzzer | 1 |
C1-1-2 Battery & Fittings, Twin
| 13***5D | Setscrew, M8x20 | 2 |
| 13***2D | Bolt | 1 |
| 13***2D | Bolt, M12 X 50mm Long | 1 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 33***10 | G.A, Parts To Complete, Cab Tier 3 | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
C1-3-5 7 Pin Trailer Socket, Sae Single
| 13***5D | Screw, M5x20 | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
C1-5-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-3-4 7 Pin Trailer Socket, Single
| 13***9D | Setscrew | 3 |
| 13***3D | Nut, Lock M5 | 3 |
| 47***00 | G.A, 7 Pin Trailer Socket | 1 |
C1-11-2 Harness Connectors, Repair Ip67 Standard
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C2-8-1 Earth Strap
| 13***5D | Screw, M12 X 20mm Long | 1 |
| 14***9D | Washer, M12 | 1 |
| 71***79 | Strap, Earth, 220mm Long; Superseded By 71***41 D.Jackson 08/12/06, San23096 (Greater Cross Sectional Area) | 1 |
C2-6-2 Engine Block Heater, 240v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-2-1 Switches & Sensors
| 02***79 | Screw | 1 |
| 02***81 | Screw, Socket Head | 1 |
| 02***08 | O Ring | 1 |
C2-7-1 Circuit, Induction Heater
| 13***3D | Screw, M5x16 | 4 |
| 13***3D | Setscrew | 3 |
| 13***5D | Screw, M12 X 20mm Long | 1 |
C2-4-1 Alternator
| 71***93 | Alternator | 1 |
C2-6-1 Engine Block Heater, 120v
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
C2-5-1 Alternator Mountings
| 02***07 | Bolt, M8x1.25x25 | 1 |
| 02***19 | Screw | 1 |
| 02***26 | Nut, Flange Head | 1 |
C2-3-1 Motor, Starter, 12.Volt
| 02***72 | Screw, 12 Point Cap | 3 |
| 71***01 | Motor, Starter | 1 |
C2-1-2 Module, Control Harness
| 02***56 | Clip | 6 |
| 02***57 | Clip | 3 |
| 02***82 | Screw | 3 |
C2-1-1 Module, Engine Control
| 02***74 | Screw, M8 X 45 | 3 |
| 02***64 | Screw | 1 |
| 02***93 | Screw | 8 |
C3-7-1 Light, Interior, Cab
| 47***16 | Bracket, Mounting, Door Light Switch | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 70***00 | Switch, Door Light | 2 |
C3-12-2 Light, Working, Front & Rear
| 13***5D | Setscrew, M8x20 | 0 |
| 13***3D | Nut, Self Lock M8 | 0 |
| 14***7D | Washer, M8 Plain | 0 |
C3-12-7 Light, Working, Auxiliary, 6 Front & 4 Rear
| 13***7D | Screw, M6 X 25mm | 0 |
| 13***5D | Setscrew, M8x20 | 0 |
| 13***3D | Nut, Self Lock M8 | 0 |
C3-11-1 Washer Kit, Windscreen, Left Hand Cab Step Mounted
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
C3-3-1 Control Panel, With Rear Hitch
| 33***99 | Plate, Switch, A.G Panel | 1 |
| 47***46 | Nut, M4 Insert, Self Tapping | 6 |
| 48***05 | Switch, 4wd Power Take-Off, Assembly | 0 |
C3-3-11 Control Panel, 4ws Quadtronic
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***93 | Plate, Mounting, Switch Control | 1 |
C3-12-4 Lights, Front Combination, Auxiliary Light Installation
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Nut, Lock M5 | 4 |
| 14***5D | Washer | 4 |
C3-4-1 Fuse Box & Relays, Front
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***03 | Fuse, 5 Amp | 1 |
C3-3-3 Switches & Sensor, Rear Hitch Control, External
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Setscrew, M6 X 12mm Long | 1 |
C3-9-2 Air Conditioning, Chassis
| 12***91 | Washer, Nylon | 4 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***2D | Bolt | 6 |
C3-14-4 Power Supply, Auxiliary, Without Convenience Socket, 4ws
| 33***03 | G.A, Ecu1 Installation | 1 |
| 33***93 | Plate, Mounting, Switch Control | 1 |
| 33***12 | G.A, Auxiliary Power Sup 4ws | 1 |
C3-14-1 Power Supply, Auxiliary, With Convenience Socket, 2ws Builds
| 13***3Z | Screw, M6x16 | 3 |
| 13***1Z | Nut, M5-8 | 1 |
| 14***6Z | Washer, M6 | 3 |
C3-6-1 Switch, Column
| 70***01 | Column, Switch Cap | 1 |
| 70***01 | Clamp | 1 |
| 70***00 | Switch, Column Indicator | 1 |
C3-9-4 Air Conditioning, Unit Assembly
| 13***1Z | Screw, M4 X 12 | 7 |
| 13***3Z | Nut | 2 |
| 30***61 | Unit, Air Conditioning, Heater | 1 |
C3-7-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C3-5-2 Fuse Box, Relays, & Ecu Controllers, Rear 2ws Mechanical
| 13***3D | Screw, M5x16 | 3 |
| 13***5D | Screw, M5x20 | 7 |
| 13***3D | Setscrew | 2 |
C3-12-5 Light, Working, Auxiliary, 2/4 Front & 2/4 Rear
| 13***5D | Setscrew, M8x20 | 0 |
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 0 |
C3-14-2 Power Supply, Auxiliary, Without Convenience Socket, 2ws Builds
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***53 | Bracket, Mounting, Power Supply | 1 |
C3-5-1 Fuse Box, Relays, & Ecu Controllers, Rear 4ws Mechanical & Electric
| 13***3D | Screw, M5x16 | 3 |
| 13***5D | Screw, M5x20 | 4 |
| 13***3D | Setscrew | 2 |
C3-10-1 Wash/Wipe, Windscreen
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
C3-9-3 Heater, Installation
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Bolt | 1 |
| 13***3D | Nut, M6 Lock | 1 |
C3-3-2 Switch Panel, Draft Control
| 33***21 | Knob, Control, Setpoint Setting | 1 |
| 33***22 | Knob, Control | 2 |
| 33***23 | Lever, Main Lift Control; Supp No Changed From 1.532.000.002. Ref, R Bryant 21/04***05.P Gamble. | 1 |
C3-13-1 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 33***43 | G.A, Cab Common Parts, Tier 3 | 1 |
| 47***52 | G.A, Machine Controls, & Instrumentation | 1 |
C3-12-6 Light, Working, Auxiliary, 6 Front & 4 Rear
| 13***5D | Setscrew, M8x20 | 0 |
| 13***7D | Setscrew, M8x25 | 4 |
| 14***7D | Washer, M8 Plain | 0 |
C3-7-3 Ashtray & Lighter
| 33***81 | Ashtray | 1 |
| 33***81 | Plate, Ashtray Retaining | 1 |
| 60***3Z | Screw, Countersunk | 2 |
C3-1-1 Instrumentation, Front
| 24***02 | Grommet | 1 |
| 24***04 | Grommet | 2 |
| 24***02 | Grommet | 1 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-8-1 Radio, Optional
| 71***00 | Aerial | 1 |
| 71***01 | Speaker | 2 |
| 71***02 | Grille, Speaker | 2 |
C3-12-1 Light, Head, Right Hand Dip, Auxiliary Lights Installation
| 24***04 | Grommet, Blind, 11.1mm | 2 |
| 33***30 | Bracket, Mounting, Auxiliary/Lights Left Hand | 1 |
| 33***46 | Bracket, Mounting, Auxiliary/Light Right Hand | 1 |
C3-12-3 Light, Indicator, Side
| 14***4D | Washer, Plain M4 | 4 |
| 24***10 | Grommet | 2 |
| 47***35 | G.A, Elec Parts To Comple | 1 |
C3-14-3 Power Supply, Auxiliary, With Convenience Socket, 4ws Builds
| 13***3D | Setscrew | 2 |
| 13***1D | Nut, Plain M5 | 1 |
| 14***6D | Washer, M6 Plain | 2 |
C3-2-2 Switches, Rear, & Spool Controllers, Electronic Valves
| 24***09 | Grommet | 3 |
| 33***52 | Boot, Warning Buzzer | 1 |
| 33***31 | G.A, Air Con Installation | 1 |
C3-9-1 Air Conditioning, Cab
| 13***5Z | Bolt | 3 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***6D | Washer, M6 Plain | 3 |
C3-5-10 Fuse Box, Conversion, Service Fix, 27 Way To 3 X 10 Way
| 13***3D | Screw, M5x16 | 2 |
| 13***3D | Nut, Lock M5 | 2 |
| 14***5D | Washer | 2 |
C3-2-1 Switches, Rear
| 24***09 | Grommet | 3 |
| 33***52 | Boot, Warning Buzzer | 1 |
| 33***31 | G.A, Air Con Installation | 1 |
D Controls-Machine, Engine & Steering
D1-10-1 Control, Valve Flow, Mechanical
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***31 | Screw, Grub | 2 |
D1-11-1 Contr0l, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***3Z | Nut | 2 |
D1-2-11 Valve, Air, 4ws
| 47***69 | Adapter, Straight Connector | 1 |
| 47***05 | Adapter, Elbow | 2 |
| 47***00 | Valve, Air, 4ws | 1 |
D1-9-1 Control, Valve Flow, Electronic
D1-12-1 Control, Pick Up Hitch
| 13***3Z | Screw, M6x16 | 2 |
| 14***9Z | Washer | 1 |
| 23***20 | Knob, Control Lever | 1 |
D1-2-21 Gearshift, Air Assisted, Range Change, 2ws
| 13***2D | Bolt | 2 |
| 13***1D | Bolt, M10 X 45mm Long | 2 |
| 13***1D | Nut, Plain M5 | 2 |
D1-5-1 Control, Hydraulic, 3 & 4 Spool, Electronic Valves
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 33***09 | Plate, Spool Pod Cover | 1 |
D1-3-1 Brake, Parking
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
| 33***14 | Valve, Handbrake, Colour Black | 1 |
D1-7-1 Controls, Hydraulic, 3 & 4 Mechanical Spool Valves
| 13***5Z | Bolt | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 6 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-2-22 Gearshift, Air Assisted, Range Change, 4ws
| 13***9D | Bolt, Special M6x90 | 2 |
| 13***1D | Bolt, M10 X 45mm Long | 2 |
| 13***1D | Nut, Plain M5 | 2 |
D1-1-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***5Z | Bolt | 6 |
D1-2-2 Valve Assembly, Pneumatic
| 25***48 | Valve, Manifold Assembly, 4 Station | 1 |
| 47***67 | Manifold, 4 Station | 1 |
| 47***69 | Adapter, Straight Connector | 8 |
D1-4-1 Controls, Brake & Clutch
| 13***5Z | Bolt | 1 |
| 13***8Z | Screw, M8x30 | 1 |
| 13***9Z | Setscrew, M8x35 | 1 |
D1-2-10 Gearshift, Air Assisted, Range Change, 4ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-2-3 Ram Assembly, Pneumatic Gearchange
| 47***62 | Elbow, 1/8" X 6mm | 3 |
| 47***88 | Nut | 2 |
| 47***91 | Clevis, Assembly | 2 |
D1-2-1 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***1Z | Nut, M5-8 | 2 |
D1-13-1 Control, Ladder Hitch Release
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***9Z | Washer | 1 |
D2-2-1 Control, Throttle, Foot
| 13***7D | Screw, M6 X 25mm | 4 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, M6 Lock | 4 |
D2-1-1 Control, Hand Throttle
| 13***3D | Bolt, M4 X 16 | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
| 14***6D | Washer, M6 Plain | 8 |
D3-1-1 Steering Wheel, Installation
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 4 |
E Hydraulics & Air Including, Steering
E1-9-4 Circuit, Auxiliary, 4 Spool, Rear, Electronic Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***59 | Hose, 1/2"Bsp 660mm | 1 |
E1-4-1 Circuit, Steering, 2ws & 4ws (Fig.1)
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***5D | Setscrew, M8x20 | 3 |
| 13***7D | Setscrew, M8x25 | 2 |
E1-21-2 Qr Drain Couplings, With Drip Tank, Installation
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E1-9-3 Circuit, Auxiliary, 4 Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***01 | G.A, Mech Spool Common | 1 |
E1-4-2 Circuit, Steering, 4ws, (Fig.2)
| 13***9D | Bolt, Special M8x90 | 2 |
| 13***6D | Bolt, M16 X 70mm | 4 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-16-2 Circuit, Auxiliary, Free Flow Return, Front, Electronic Valves
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 5 |
| 13***5Z | Nut | 1 |
E1-11-1 Circuit, Auxiliary, 3 Spool, Front, With Weight Tray, (Mechanical Valves)
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-6-1 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-2-2 Circuit, Transmission
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***9D | Setscrew, M8x35 | 2 |
| 13***1D | Setscrew, M8x45 | 1 |
E1-10-2 Circuit, Auxiliary, 4th Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 3 |
| 33***59 | Hose, 1/2"Bsp 660mm | 1 |
E1-16-1 Circuit, Auxiliary, Free Flow Return, Front, Mechanical Valves
| 13***7D | Setscrew, M8x25 | 5 |
| 13***5Z | Nut | 1 |
| 13***3D | Nut, Self Lock M8 | 5 |
E1-20-2 Circuit, Flow Divider, Rear, Without Trailer Brake Valve
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***9D | Bolt | 2 |
E1-15-2 Circuit, Auxiliary, Free Flow Return, Rear, Electronic Valves
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***5Z | Nut | 1 |
E1-1-11 Circuit, Neutral, Mechanical Valves, 4ws
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***7D | Capscrew | 4 |
E1-14-1 Circuit, Auxiliary, 4 Spool, Front, With Pto Frame
| 23***06 | O Ring, 3/8"Bsp | 6 |
| 33***47 | Cap, Qrc, Faster Tarv | 2 |
| 33***70 | Cap, Qrc (Double), Faster Tarv | 1 |
E1-17-1 Circuit, Rear Suspension 2ws
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Bolt, M6x100mm | 3 |
E1-12-2 Circuit, Auxiliary, 3 Spool, Front Hitch, (Electronic Valves)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, Back | 1 |
E1-1-1 Circuit, Neutral, Mechanical Valves, 2ws
| 13***7D | Setscrew, M8x25 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***7Z | Capscrew, M8x25mm | 4 |
E1-12-1 Circuit, Auxiliary, 3 Spool, Front Hitch, (Mechanical Valves)
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3Z | Nut | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
E1-10-1 Circuit, Auxiliary, 4th Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 3 |
| 33***01 | G.A, Mech Spool Common | 1 |
E1-9-2 Circuit, Auxiliary, 3 Spool, Rear, Electronic Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***59 | Hose, 1/2"Bsp 660mm | 1 |
E1-2-11 Circuit, Transmission Cooler
| 13***7D | Setscrew, M8x25 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
E1-7-1 Circuit, Front Hitch
| 13***8D | Bolt, M8x30mm | 1 |
| 13***3D | Bolt | 1 |
| 13***8D | Bolt | 1 |
E1-21-1 Qr Drain Couplings, With Drip Tank, Installation
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***3D | Nut, M6 Lock | 2 |
| 14***6D | Washer, M6 Plain | 4 |
E1-9-1 Circuit, Auxiliary, 3 Spool, Rear, Mechanical Valves
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 23***10 | O Ring, 1/2"Bsp | 11 |
| 33***01 | G.A, Mech Spool Common | 1 |
E1-2-1 Circuit, Transmission, Cooling
| 13***5D | Setscrew, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***0D | Setscrew, M8 X 40mm Long | 1 |
E1-5-1 Circuit, Differential Lock
| 16***50 | Adaptor | 1 |
| 24***03 | O Ring | 1 |
| 33***59 | G.A, Suspension Charge, Valve | 1 |
E1-15-1 Circuit, Auxiliary, Free Flow Return, Rear, Mechanical Valves
| 13***7D | Setscrew, M8x25 | 2 |
| 13***5Z | Nut | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
E1-13-1 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray (Mechanical Valves)
| 13***3Z | Nut | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 33***70 | Cap, Qrc (Double), Faster Tarv | 1 |
E1-3-1 Circuit, 2/4wd, Front & Rear Pto
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-13-2 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray (Electronic Valves)
| 13***3Z | Nut | 1 |
| 23***06 | O Ring, 3/8"Bsp | 2 |
| 33***70 | Cap, Qrc (Double), Faster Tarv | 1 |
E1-20-1 Circuit, Flow Divider, Rear, With Trailer Brake Valve
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***9D | Bolt | 2 |
E1-1-2 Circuit, Neutral, Electronic Valves, 2ws
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M6 Lock | 2 |
E1-1-12 Circuit, Neutral, Electronic Valves, 4ws
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, M6 Lock | 2 |
E1-11-2 Circuit, Auxiliary, 3 Spool, Front, With Weight Tray, (Electronic Valves)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***9D | Bolt | 1 |
| 13***3D | Nut, Back | 1 |
E1-18-1 Circuit, Rear Suspension 4ws
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***7D | Setscrew, M8x25 | 2 |
| 13***8D | Setscrew, M8 X 30mm | 2 |
E2-2-1 Pump, Main/Auxiliary, Hydraulic, 2ws
| 20***00 | Pump, Twin Main/Auxiliary, Hydraulic, 45cc,19cc | 1 |
| 20***23 | Coupling, Muff | 1 |
| 20***42 | Seal, Oil | 1 |
E2-1-1 Pump, Steer & Suspension
| 20***20 | Pump, Steering/Suspension | 1 |
| 20***18 | Seal, Oil, Radial Lip | 2 |
| 20***19 | Retainer | 1 |
E2-3-1 Pump, Main/Auxiliary, Hydraulic, 4ws
| 20***65 | Pump, Triple Main/Auxiliary, Hydraulic 45.19.19cc | 1 |
| 20***19 | Retainer | 1 |
| 20***20 | Pin, Straight | 6 |
E3-1-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E3-1-5 Valve, Assembly, Electronic 3 Spool, And Adapters
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***41 | Valve, Hydraulic, 3 Spool Electrionic | 1 |
E3-9-1 Valve, Suspension Charge
| 25***96 | Cartridge, Unloading | 1 |
| 25***98 | Cartridge, Solenoid | 1 |
| 25***50 | Coil, 12v, Deutsch Connector | 1 |
E3-1-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
| 24***01 | O Ring | 1 |
E3-12-1 Filter, Hydraulic, Tank Mounted
| 32***04 | O Ring | 1 |
| 32***52 | Filter, Hydraulic, Assembly | 1 |
| 32***90 | Housing, Filter | 1 |
E3-13-2 Filter, Transmission Oil
| 33***54 | Element, Trans/Oil Filter | 1 |
| 33***56 | Filter, Transmission Oil, Assembly | 1 |
| 33***80 | Kit-Seal | 1 |
E3-2-1 Valve Section, Inlet, With Main Relief
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***45 | O Ring | 2 |
| 25***54 | Plug | 1 |
E3-10-1 Valve, Flow Regulator, Diverter
| 25***69 | Cartridge, Sequence | 1 |
| 25***71 | Cartridge, Logic | 1 |
| 25***72 | Kit-Seal | 1 |
E3-4-11 Valve, Directional Control, Section
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-5-11 Valve, Draft Control, Section
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 1 |
| 25***66 | Plug | 2 |
E3-4-1 Valve, Section, Directional Control, With Flow Control
| 25***38 | Valve, Section, Directional, With Flow Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-3-11 Valve, Directional Control, Section
| 25***74 | Valve, Shuttle | 1 |
| 25***75 | Kit, Seals | 1 |
| 25***76 | Kit, Repair | 1 |
E3-1-6 Valve, Assembly, Electronic 4 Spool, And Adapters
| 24***08 | O Ring | 2 |
| 25***44 | Section Inlet, C/W Relief Valve | 1 |
| 25***40 | Valve, Assembly, 4 Spool Ehs-2 | 1 |
E3-11-1 Valve, Steering
| 33***91 | G.A, Steering Hydraulic | 1 |
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***07 | Pin, Cross | 1 |
E3-13-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-7-1 Valve, Solenoid, Pressure Maintenance
| 13***0D | Setscrew | 4 |
| 13***2D | Capscrew, M8 X 120 Long, Grade 12.9 | 2 |
| 13***8Z | Capscrew, M5 X 30 | 0 |
E3-6-1 Valve, Main Relief, In-Line
| 25***18 | Valve, Main Relief, In-Line | 1 |
| 25***78 | Cartridge, Main Relief | 1 |
| 25***13 | Kit-Seal | 1 |
E3-1-22 Valve Mountings, Electronic Valves
| 13***8D | Setscrew, M8 X 30mm | 2 |
| 13***3D | Nut, Self Lock M10 | 1 |
| 13***3D | Nut, M8 Locking | 2 |
E3-1-21 Valve Mountings, Mechanical Valves
| 13***8D | Screw, M8x30 | 2 |
| 13***3D | Nut, Self Lock M8 | 4 |
| 13***3D | Nut, Self Lock M10 | 2 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***01 | Kit-Pressure Tube, C/W Solenoid | 2 |
| 25***01 | Kit-Solenoid | 2 |
| 25***40 | Valve, Section,, Draft Control | 1 |
E3-3-1 Valve, Section, Directional Control
| 25***39 | Valve, Section, Directional Control | 1 |
| 25***45 | O Ring | 2 |
| 25***46 | Seat Spring | 1 |
E3-2-11 Valve, Endplate, Section
| 25***54 | Plug | 1 |
| 25***66 | O Ring | 1 |
| 25***69 | Filter | 1 |
E3-8-1 Valve, Control, 4ws
| 13***8Z | Capscrew, M5 X 30 | 4 |
| 25***00 | Valve, Solenoid | 1 |
| 25***01 | Coil | 2 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-5-1 Ram, Rear Hitch, 80mm
| 47***05 | Nipple, Grease | 2 |
| 47***95 | Bearing, Assembly; Cbm Will Not Supply To Jcb. Use Skf P/No, Gem 35 Es-2rs Supply Code 00220,San 09757 | 1 |
| 47***96 | Bearing, Assembly; Cbm Would Not Supply To Jcb.But Skf P/No, Gem 45 Es-2rs. Supplier Code 00220.San 09757 | 1 |
E4-4-1 Ram, Front Hitch, 80mm
| 48***47 | Nipple, Grease | 2 |
| 48***90 | Ram, Front Hitch, Assembly | 2 |
| 48***91 | Kit-Ram Seal | 1 |
E4-6-1 Power Track Rod
| 13***4D | Bolt | 4 |
| 13***8D | Bolt, M16 X 80mm | 4 |
| 33***90 | Ram, Assembly, 4ws Power Track Rod | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm Heavy Duty
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***13 | Cover, Protective Tube | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 1 |
| 47***07 | Cover, Protective Tube | 1 |
E4-3-1 Ram, Steering
| 33***91 | G.A, Steering Hydraulic | 1 |
| 47***25 | Gaiter | 2 |
| 47***29 | Nut, Hexagonal | 1 |
F Axles, Wheels & Transmission
F1-1-4 454/30970, Front Axle, 2ws, No Spin Differential, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-2-1 Hub & Components, Front Left Hand 2ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-14-1 454/07600, Differential Assy, No Spin Differential 4ws
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-12-4 Hub & Components, Front Right Hand 4ws
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-2-2 Hub & Components, Front Right Hand 2ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-14-2 454/09100, Differential Assy, Maxtrac, 4ws
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-13-1 454/28000, Drivehead Assembly, No Spin Differential, 4ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-1-3 454/30960, Front Axle, 2ws, Maxtrac, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-4-2 454/09100, Differential Assy, Maxtrac, 2ws
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-11-12 454/M2217, Front Axle, 4ws, Maxtrac, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-1-1 454/26900, Front Axle, 2ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-1-2 454/27000, Front Axle, 2ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***5Z | Bolt | 1 |
F1-12-3 Hub & Components, Front Left Hand 4ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-12-1 Hub & Components, Front Left Hand 4ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-3 454/30980, Front Axle, 4ws, Maxtrac, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-12-2 Hub & Components, Front Right Hand 4ws
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-11 454/M2215, Front Axle, 4ws, No Spin Differential, 454/M2215
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
F1-11-13 454/M2218, Front Axle, 4ws, No Spin Differential, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-4-1 454/07600, Differential Assy, No Spin, 2ws
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-3-2 454/27900, Drivehead Assembly, Maxtrac 2ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-2-4 Hub & Components, Front Right Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F1-11-4 454/30990, Front Axle, 4ws, No Spin Differential, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-11-10 454/M2214, Front Axle, 4ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
F1-3-1 454/28000, Drivehead Assembly, No Spin Differential, 2ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Assembly, No-Spin | 1 |
F1-11-2 454/27200, Front Axle, 4ws, No Spin Differential
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-13-2 454/27900, Drivehead Assembly, Maxtrac 4ws
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
| 45***00 | Differential, Maxtrac, ( 33mm Flange ) | 1 |
F1-11-1 454/27100, Front Axle, 4ws, Maxtrac
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***3D | Bolt, M20 X 55mm | 4 |
F1-2-3 Hub & Components, Front Left Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
F2-2-4 Hub & Components, Rear Right Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-11-2 454/31620, Rear Axle, 4ws, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-12-4 Hub & Components, Rear Right Hand 4ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-4-1 454/12400, Differential Assy
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-14-1 454/12400, Differential Assy
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-2-3 Hub & Components, Rear Left Hand 2ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-12-1 Hub & Components, Rear Left Hand 4ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-11-1 454/30420, Rear Axle, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-1-2 454/31610, Rear Axle, 2ws-Udh, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-3-1 458/10680, Drivehead Assembly
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-13-1 458/10680, Drivehead Assembly
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 45***02 | Plate, End | 1 |
F2-11-11 454/M2219, Rear Axle, 4ws, Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-12-2 Hub & Components, Rear Right Hand 4ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-2-1 Hub & Components, Rear Left Hand 2ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-1-1 454/30810, Rear Axle, 2ws-Udh
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***9D | Bolt, M16 X 90mm | 4 |
F2-12-3 Hub & Components, Rear Left Hand 4ws, Abs
| 13***7Z | Bolt, Coated | 2 |
| 13***5Z | Capscrew, M8x20 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
F2-2-2 Hub & Components, Rear Right Hand 2ws
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-11-10 454/M2216, Rear Axle, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***07 | Bolt | 2 |
| 13***1D | Bolt, M16 X 45mm | 4 |
F2-13-2 Spacer Kit, 921/53500
| 92***00 | Kit-Spacer | 1 |
F3-3-15 Wheels & Tyres, Nokian 16.9 R24, 72" (1830)
| 15***01 | Valve | 1 |
| 33***61 | Wheel, Assembly Nokian 16.9 R24, 72" (1830) | 4 |
| 41***12 | Rim, Wheel W15l X 24 | 1 |
F3-3-11 Wheels & Tyres, 480/70r28, 480/70r30, 2015mm (80in.) Track
| 15***01 | Valve | 1 |
| 33***66 | Wheel, Assembly Left Hand, 480/70-R30 Firestone | 2 |
| 33***67 | Wheel, Assembly Right Hand, 480/70-R30 Firestone | 2 |
F3-3-5 Wheels & Tyres, 620/70-R26 Xm27, Michelin
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw20ax26 | 1 |
| 42***00 | Tyre, 620/70 R26 Xm27, Tl 145b Michelin | 1 |
F3-3-14 Wheels & Tyres, 16.9-R28 & 30 Nokian
| 15***01 | Valve | 1 |
| 33***14 | Wheel, Assembly, 16.9r30 Nokian | 4 |
| 33***33 | Tyre, Assembly, 16.9-R28 Nokian | 4 |
F3-3-12 Wheels & Tyres, 540/65-R28 & R30, 2015mm (80in) Track
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
| 41***00 | Rim, Wheel, W14lx28, 72mm Offset, 5 Stud | 1 |
F3-3-6 Wheels & Tyres, 520/65-R30 Nokian, 72" Track
| 15***01 | Valve | 1 |
| 33***94 | Wheel, Assembly, 520/65-R30 Nokian | 4 |
| 41***00 | Rim, Wheel, Dwl15x30, 5 Stud | 1 |
F3-3-10 Wheels & Tyres, 540/65-R30 Nokian, Tri 2
| 15***01 | Valve | 1 |
| 33***06 | Wheel, Assembly Left Hand, 54***30 Nokian | 2 |
| 33***07 | Wheel, Assembly Right Hand, 54***30 Nokian | 2 |
F3-4-1 Wheel Chocks, German
| 13***8Z | Screw, M8x30 | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
F3-3-1 Wheels & Tyres, 480/70r30
| 15***01 | Valve | 1 |
| 33***64 | Wheel, Assembly Left Hand, 480/70-R30 Firestone | 2 |
| 33***65 | Wheel, Assembly Right Hand, 480/70-R30 Firestone | 2 |
F3-3-13 Wheels & Tyres, 16.9-R28 & R30
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw15lx30, 72mm Offset, 5 Stud | 1 |
| 41***00 | Rim, Wheel, W14lx28, 72mm Offset, 5 Stud | 1 |
F3-3-7 Wheels & Tyres, 440/80-R24 Nokian, Tri2
| 15***01 | Valve | 1 |
| 33***08 | Wheel, & Tyre Assembly Tri2, 44***24 Nokian L/H | 2 |
| 33***09 | Wheel, & Tyre Assembly Tri2, 44***24 Nokian R/H | 1 |
F3-3-9 Wheels & Tyres, 440/80-R30 Nokian
| 15***01 | Valve | 1 |
| 33***55 | Wheel, & Tyre Assembly Tri2, 44***30 Nokian L/H | 2 |
| 33***57 | Wheel, & Tyre Assmbly Tri2, 44***30 Nokian R/H | 2 |
F3-3-8 Wheels & Tyres, 440/80-R28 Nokian
| 15***01 | Valve | 1 |
| 33***04 | Wheel, & Tyre Assembly Tri2, 44***28 Nokian L/H | 2 |
| 33***05 | Wheel, & Tyre Assembly Tri2, 44***28 Nokian R/H | 2 |
F3-3-4 Wheels & Tyres, 600/65-R28 Tm800, Pirrelli
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dw18lx28, 5 Stud | 1 |
| 42***00 | Tyre, Trelleborg, 60***8t | 1 |
F3-3-2 Wheels & Tyres, 540/65-R30
| 15***01 | Valve | 1 |
| 33***68 | Wheel, Assembly Left Hand, 54***30 Firestone | 2 |
| 33***73 | Wheel, Assembly Right Hand, 540/65-R30 Firestone | 2 |
F3-1-1 Propshafts, Axle Drive, Front
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 8 |
| 13***3Z | Nut | 8 |
| 91***03 | Kit-Spider, Cap D=35mm X 106.4 | 2 |
F3-3-3 Wheels & Tyres, 16.9-R28 & R30
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel, Dwl15x30, 5 Stud | 1 |
| 42***00 | Tyre, 16.9-R30, Michelin Agribib | 1 |
F3-2-1 Propshafts, Axle Drive, Rear
| 13***0Z | Bolt, M10x40; Replaces 60***0r | 4 |
| 13***3Z | Nut | 4 |
| 82***47 | Nut, Cleveloc | 8 |
F5-3-3 Pipework, Powershift Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***4Z | Bolt | 2 |
| 13***7Z | Capscrew, M8x25mm | 3 |
F5-2-1 Transmission Gearbox, Assembly, Twin Pto, 40/50kph Airshift
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M10 X 55 | 7 |
| 13***9Z | Screw, M10 X 35 | 19 |
F5-3-2 Pipework, Wet Clutch Drain
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***1Z | Nut | 2 |
F5-4-1 Dipstick & Filler, Transmission, Mechanical Spool Valve Build
| 13***5D | Setscrew, M8x20 | 1 |
| 13***6D | Screw, M8x20 | 2 |
| 13***7D | Setscrew, M8x25 | 1 |
F5-3-1 Pipework, Pto Drain
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-1-1 Transmission Gearbox, Assembly, Single Pto, 40/50kph Airshift
| 13***7Z | Bolt | 2 |
| 13***3Z | Bolt, M10 X 55 | 7 |
| 13***9Z | Screw, M10 X 35 | 19 |
F5-4-2 Dipstick & Filler, Transmission, Electronic Spool Valve Build
| 13***5D | Setscrew, M8x20 | 1 |
| 13***8D | Setscrew, M8 X 30mm | 1 |
| 13***9D | Setscrew, M8x35 | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive Clutch
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***03 | Washer, Thrust; Superseded By 82***82 | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***49 | Plunger | 3 |
F6-4-1 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-2-1 Gearbox Housing
| 13***9Z | Bolt | 1 |
| 13***7Z | Bolt, Coated | 7 |
| 13***9Z | Screw, M10 X 35 | 21 |
F6-1-1 Gearbox, Range, Manual
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-1-2 Gearbox, Range, Airshift
| 13***9Z | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 21***05 | Pin, Tension | 1 |
F6-5-2 Shaft, Output Group, 4 Wheel Drive Clutch
| 22***23 | Circlip | 1 |
| 44***06 | Plate, Counter | 13 |
| 44***09 | Washer, Thrust | 1 |
F6-7-1 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***07 | Shaft, Selector, Low & Reverse | 1 |
F6-6-1 Gear Change, Air Assisted
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F7-8-1 Gearbox, 6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F7-5-1 Gearbox, 6 Speed, Front Cover Assembly
| 45***97 | Seal, Oil | 1 |
| 45***02 | Cover, Front | 1 |
| 45***00 | Gearbox, 6 Speed (Eaton) | 1 |
F7-4-1 Gearbox, 6 Speed, Input Shaft Assembly
| 45***68 | Bearing, Roller | 1 |
| 45***00 | Gearbox, 6 Speed (Eaton) | 1 |
| 47***64 | Flange, Synchro | 1 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-2-1 Gearbox, 6 Speed, Front Case Assembly
| 45***16 | Screw, Hammer Drive | 2 |
| 45***24 | Dowel, 8.0 Dia X 16.0mm | 2 |
| 45***33 | Plunger, Neutral Detent | 1 |
F7-1-1 Gearbox, 6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-7-1 Gearbox, 6 Speed, Mainshaft Assembly
| 45***44 | Gear, 3rd | 1 |
| 45***45 | Bearing, Needle Roller | 2 |
| 45***49 | Plunger | 7 |
F7-9-1 Gearbox, 6 Speed, Remote Control
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 45***35 | Pin, Grooved | 1 |
F7-3-1 Gearbox, 6 Speed, Rear Case Assembly
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***49 | Bolt, Fastener Special | 4 |
F7-6-1 Gearbox, 6 Speed, Layshaft Assembly
| 45***63 | Circlip, 2.12mm | 0 |
| 45***64 | Circlip, 2.07mm | 0 |
| 45***65 | Circlip, 2.02mm | 0 |
F8-4-1 Clutch Assembly, Input
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***04 | Retainer, Spring | 1 |
F8-5-1 Gear Group, Splitter & Pto, Input, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***85 | Circlip, Internal | 1 |
F8-2-2 Clutch Assembly, Power Take Off, Rear
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 21***04 | Dowel | 3 |
| 22***60 | Circlip | 1 |
F8-4-2 Clutch Assembly, Medium/High
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-9-1 Clutch Drum, Carrier & Input Gear, Assembly
| 33***85 | Plate, Bearing Cover | 1 |
| 45***24 | Carrier, Clutch & Input Gear | 1 |
| 45***11 | Gear, 27t Power Take-Off Input | 1 |
F8-8-1 Clutch Assembly, Drum, Hub, Pressure Plates
| 13***16 | Bolt | 8 |
| 13***07 | Capscrew | 8 |
| 22***60 | Circlip | 1 |
F8-10-1 Solenoid & Valves, Splitter Gearbox
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 16 |
F8-6-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 3 |
F8-3-1 Gearbox Housing, Splitter & Pto, Clutch Assemblies
| 13***9Z | Screw, M10 X 35 | 18 |
| 33***25 | Plate, Friction | 2 |
| 33***26 | Plate, Counter, Brake | 1 |
F8-4-3 Clutch Assembly, Low
| 33***61 | Plate, Pressure, 6mm | 0 |
| 33***63 | Plate, Pressure, 6.5mm | 0 |
| 44***09 | Washer, Thrust | 1 |
F8-2-1 Clutch Assembly, Power Take Off, Front
| 13***7Z | Bolt, Coated | 6 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
F8-1-1 Gearbox, Splitter, Single Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew | 6 |
| 45***01 | Cover, End | 2 |
F8-1-2 Gearbox, Splitter, Twin Pto
| 13***7Z | Bolt, M10x25 | 6 |
| 13***9Z | Capscrew, M10 X 35mm | 6 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-7-1 Clutch Assembly, Wet Master
| 13***9Z | Screw, M10x35mm | 15 |
| 13***3Z | Bolt, M10 X 55 | 3 |
| 13***21 | Bolt | 12 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-1-2 Power Take Off, Front Attachments, ( Single )
| 11***25 | Strap | 2 |
| 13***3D | Setscrew, M8 X 16mm | 3 |
| 13***3D | Bolt | 3 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-1-1 Power Take Off, Front Attachments
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3D | Setscrew, M10 X16mm | 3 |
G Brakes
G1-19-1 Trailer Circuit, Duomatic Coupling
| 13***7D | Setscrew, M8x25 | 2 |
| 13***1D | Nut, M8 | 2 |
| 14***7D | Washer, M8 Plain | 4 |
G1-21-1 Valve, Circuit Protection
| 15***75 | Valve, Circuit Protection | 1 |
G1-2-1 Brake Caliper, Front
| 13***3D | Bolt, M20 X 55mm | 4 |
| 13***8D | Bolt, M20 X 80mm | 4 |
| 15***65 | Caliper, Brake Assembly, 75mm | 2 |
G1-1-11 Brake, System, 4ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Setscrew, M12 X 30 | 2 |
G1-12-1 Valve, Footbrake
| 15***00 | Valve, Brake | 1 |
| 15***01 | Kit-Repair, Brake Valve | 1 |
| 47***00 | G.A. | 1 |
G1-8-1 Handbrake Circuit
| 13***3Z | Screw, M6x16 | 2 |
| 14***6Z | Washer, M6 | 2 |
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
G1-1-2 Brake, System, 2ws Abs
| 13***8D | Setscrew, M12 X 30 | 1 |
| 13***8D | Bolt, M8x30mm | 5 |
| 13***3D | Nut, Self Lock M8 | 5 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***05 | Kit-Pilot Head, Conversion | 1 |
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Seal, Brake Valve | 1 |
G1-6-1 Foot Brake, Actuator Circuit
| 13***4D | Screw | 1 |
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***7Z | Bolt | 4 |
G1-6-11 Foot Brake, Actuator Circuit, Abs
| 13***8D | Setscrew, M10 X 30 | 2 |
| 13***7D | Setscrew, M12 X 25 | 6 |
| 13***0D | Bolt, M8 X 200 Long | 2 |
G1-13-1 Actuator, Air & Hydraulic
| 13***8D | Setscrew, M10 X 30 | 2 |
| 14***8D | Washer, M10 | 2 |
| 15***01 | Chamber, Brake | 1 |
G1-15-1 Brake, Actuator, Parking
| 47***19 | Bracket | 1 |
| 47***33 | Kit, Bolt | 1 |
| 47***34 | Kit-Repair | 1 |
G1-17-1 Trailer Circuit, Palm Couplings, Twin Line
| 33***43 | Cover, 'C' Coupling | 1 |
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
G1-20-1 Trailer Circuit, Twin Coupling Head
| 13***7D | Setscrew, M10 X 25mm Long | 3 |
| 13***9D | Setscrew, M10 X 35mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 5 |
G1-1-12 Brake, System, 4ws Abs
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5D | Setscrew, M6 X 20mm Long | 2 |
| 13***8D | Setscrew, M12 X 30 | 2 |
G1-11-1 Valve, Check
| 15***00 | Valve, Non Return | 1 |
| 99***03 | Kit-Repair, Check Valve | 1 |
G1-16-1 Valve, Trailer Control
| 15***25 | Kit-Repair, Brake Valve | 1 |
| 92***79 | Valve, Trailer Control, Single Caliper | 1 |
G1-10-1 Air Drier
| 15***84 | Drier, Air, Regenerative | 1 |
| 15***05 | Cartridge, Desiccant | 1 |
| 15***06 | Kit-Heater | 1 |
G1-30-1 Brakes, Trailer, Hydraulic
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 1 |
| 14***11 | Seal, Bonded | 2 |
G1-32-1 Trailer Brakes, Hydraulic, Single Line (Safim)
| 13***7D | Setscrew, M8x25 | 2 |
| 13***4D | Bolt | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-7-2 Trailer Braking, Control Line Filter, Circuit
| 13***7D | Setscrew, M10 X 25mm Long | 2 |
| 13***3D | Nut, Self Lock M10 | 2 |
| 14***8D | Washer, M10 | 4 |
G1-3-11 Brake Caliper, Rear, 4ws
| 13***1D | Bolt, M16 X 45mm | 4 |
| 13***5D | Bolt, M16 X 65mm | 4 |
| 15***66 | Caliper, Brake Assembly, 60mm | 2 |
G1-5-1 Foot Brake Circuit
| 13***8D | Bolt, M6 X 30 | 8 |
| 13***0D | Setscrew, M8 X 40mm Long | 4 |
| 13***3D | Nut, Self Lock M8 | 4 |
G1-1-1 Brake, System, 2ws
| 13***8D | Setscrew, M12 X 30 | 1 |
| 13***8D | Bolt, M8x30mm | 5 |
| 13***3D | Nut, Self Lock M8 | 6 |
G1-22-1 Valve, Trailer Control, Single Line
| 15***30 | Valve, Trailer Control | 1 |
| 15***55 | Kit-Repair, Major | 1 |
| 15***56 | Kit-Repair, Minor | 1 |
G1-3-1 Brake Caliper, Rear, 2ws
| 13***5D | Bolt, M16 X 65mm | 4 |
| 13***0D | Bolt, M16 X 100mm | 4 |
| 13***3D | Nut, M16 | 4 |
G1-14-1 Valve, Handbrake
| 15***00 | Valve, Handbrake, Colour Red; Superseded By 33***14 On San100631, D.Jackson 08/04/09 ( Pi R05673 Aa ) | 1 |
| 33***14 | Valve, Handbrake, Colour Black | 1 |
G1-9-1 Brakes, Trailer Air, Single Line, Optional
| 13***7D | Setscrew, M8x25 | 4 |
| 13***3D | Bolt, M6 X 25 | 2 |
| 13***3D | Nut, M6 Lock | 2 |
G1-7-1 Trailer Braking, Circuit
| 13***8D | Bolt, M6 X 30 | 4 |
| 13***0D | Setscrew, M8 X 40mm Long | 2 |
| 13***3D | Nut, Self Lock M8 | 2 |
G1-18-1 Trailer Circuit, 'C'Couplings, Twin Line
| 45***36 | Coupling, 'C'Male, Yellow | 1 |
| 45***37 | Coupling, 'C' Female, Red | 1 |
| 47***00 | G.A, Trailer Brakes, C Type + Hyds | 1 |
G1-5-2 Foot Brake Circuit
| 13***7D | Setscrew, M8x25 | 1 |
| 13***3D | Nut, Self Lock M8 | 2 |
| 14***11 | Seal, Bonded | 2 |
G1-4-1 Air Charge Circuit
| 02***17 | Olive, 16mm | 3 |
| 13***5D | Setscrew, M8x20 | 2 |
| 13***3D | Nut, M12 | 3 |
S Suspension
S1-1-1 Suspension, Front, Fig.1
| 13***8D | Bolt, M10 X 80 | 4 |
| 13***1D | Bolt, M16 X 110 | 2 |
| 13***5D | Bolt, M16x150, Dacromet | 2 |
S1-2-1 Suspension, Front, Fig.2
| 13***9D | Screw, M12x35mm Long | 4 |
| 13***9D | Bolt, M20 X 90, Dacromet | 2 |
| 13***9D | Bolt, M18 X 190 | 1 |
S2-2-10 Kit, Conversion, V Link Germany Only
| 13***0D | Bolt, M20 X 100 | 2 |
| 13***1D | Capscrew, M20 X 110 | 2 |
| 14***2D | Washer, Plain | 2 |
S2-1-1 Suspension, Rear 2ws
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
| 13***0D | Bolt, M12x100, Dacromet | 4 |
S2-2-1 Suspension, Rear, 4ws
| 13***5D | Bolt, M8 X 65mm Long, Dacromet | 4 |
| 13***2D | Bolt, M12 X 50mm Long | 4 |
| 13***0D | Bolt, M12x100, Dacromet | 4 |
U Engine Qsb 6.7 Tier 3, S
U1-6-2 Rear Housing, Camshaft & Gear
| 02***39 | Dowel, Pin | 1 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
| 02***65 | Screw, M12 X 30 | 1 |
U1-7-1 Flywheel & Housing
| 02***67 | O Ring | 1 |
| 02***68 | Plug | 1 |
| 02***71 | Plug | 1 |
U1-3-1 Block Assembly
| 02***07 | Plug, Expansion, D=26mm | 3 |
| 02***08 | Plug, Expansion, 17.73mm | 2 |
| 02***09 | Thimble | 14 |
U1-6-1 Gear Cover, Front
| 02***62 | Screw | 6 |
| 02***74 | Screw, M8 X 45 | 7 |
| 02***81 | Dowel, Ring | 2 |
U1-5-11 Cooling Fan & Spacer
| 01***55 | Adapter, Fan Drive | 1 |
| 13***3D | Nut, Self Lock M8 | 6 |
| 13***5D | Capscrew, M10 X 20 | 4 |
U1-4-1 Crankshaft, Bearings, Pistons & Con-Rods
| 02***43 | Circlip | 12 |
| 02***09 | Kit-Wear Sleeve, Front | 1 |
| 02***59 | Kit-Wear Sleeve, Rear | 1 |
U1-7-2 Flywheel Damper
| 13***4Z | Bolt | 6 |
| 33***98 | Coupling, Voith, Torsional Damper | 1 |
| 48***22 | G.A, Voith Damper Assembl, P137 | 1 |
U1-5-1 Front End Drive
| 02***31 | Housing, Assembly, Fan Drive | 1 |
| 02***32 | Bearing | 1 |
| 02***33 | Circlip | 2 |
U1-1-1 Engine, Complete
| 33***85 | Engine, Complete, T3 | 1 |
| 47***98 | G.A, Engine - Cummins T3, 2155 | 1 |
U1-8-1 Engine Mountings
| 13***1D | Bolt, M12x110 | 2 |
| 13***3D | Nut | 2 |
| 13***8D | Capscrew, M12 X 30 | 8 |
U2-4-1 Lifting Plates, Engine
| 02***05 | Bolt | 2 |
| 02***12 | Bracket, Lifting | 1 |
| 02***14 | Screw, Flange Head | 4 |
U2-5-1 Crankcase Breather
| 02***26 | Hose, Plain | 1 |
| 02***55 | O Ring | 1 |
| 02***15 | Seal, O Ring | 2 |
U2-2-1 Rocker Assembly, Push Rods & Tappets
| 02***21 | Nut, 3/8"-24unf, Heavy Hexagon | 2 |
| 02***22 | O Ring | 4 |
| 02***10 | Screw, Flange Head, M8 X 50mm | 2 |
U2-3-1 Rocker Cover
| 02***46 | Nut | 6 |
| 02***47 | Cap, Filler | 1 |
| 02***48 | Gasket, Filler Cap | 1 |
U2-1-1 Cylinder Head
| 02***07 | Plug, Expansion, D=26mm | 13 |
| 02***15 | Plug, Pipe, 1/2"Npt | 4 |
| 02***66 | Plug, Pipe, 3/4"Npt | 2 |
U3-4-1 Exhaust System
| 02***73 | Clamp, D=81.8 | 1 |
| 02***54 | Elbow, Turbo Exhaust Outlet | 1 |
| 13***3D | Setscrew, M8 X 16mm | 6 |
U3-1-1 Manifold, Induction, And Induction Heater
| 02***10 | Screw, Flange Head, M8 X 50mm | 1 |
| 02***98 | Screw | 1 |
| 02***23 | Bolt | 7 |
U3-2-1 Manifold, Exhaust
| 02***85 | Screw | 3 |
| 02***83 | Screw, Flange Head Cap | 12 |
| 02***58 | Spacer, Mounting | 12 |
U3-3-1 Filter, Air
| 13***3D | Setscrew, M8 X 16mm | 2 |
| 13***5D | Setscrew, M8x20 | 4 |
| 13***7D | Setscrew, M8x25 | 1 |
U4-3-1 Radiator, Fittings & Mountings
| 13***3D | Setscrew, M8 X 16mm | 12 |
| 13***5D | Setscrew, M10 X 20 | 2 |
| 13***8D | Setscrew, M10 X 30 | 2 |
U4-5-1 Air Charge Cooler, Fittings & Mountings
| 13***8D | Setscrew, M8 X 30mm | 10 |
| 13***9D | Bolt, M10 X 35mm Long | 2 |
| 13***2D | Nut, Thin | 2 |
U4-4-1 Radiator & Hoses
| 13***7D | Screw, M6 X 25mm | 2 |
| 13***0D | Bolt, M8x40 | 3 |
| 13***3D | Bolt, M8 X 55mm | 1 |
U4-3-2 Anti-Recirculation
| 13***3D | Setscrew | 8 |
| 13***5D | Setscrew, M6 X 20mm Long | 14 |
| 13***3D | Setscrew, M8 X 16mm | 2 |
U4-6-1 Air Charge Cooler, Hose & Pipework
| 02***13 | Plug | 1 |
| 02***04 | Nut, Lock | 1 |
| 02***05 | Pipe, Elbow, Air Transfer | 1 |
U4-2-1 Thermostat & Housing
| 02***13 | Screw | 3 |
| 02***37 | Connector, Water Outlet | 1 |
| 02***64 | Seal, Thermostat | 1 |
U4-1-1 Pump, Water
| 02***86 | Seal, Rectangular Ring | 1 |
| 02***29 | Screw, Hex Flange Head | 2 |
| 02***73 | Pump, Kit-Water | 1 |
U4-2-2 Connector, Water Inlet
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***98 | Seal, Rectangular Ring | 1 |
| 02***33 | O Ring | 1 |
U5-1-1 Sump, Oil, & Fittings
| 02***95 | Plug | 2 |
| 02***74 | Screw, M8 X 45 | 18 |
| 02***22 | Screw, Flange Head, M10 X 25 | 1 |
U5-3-1 Engine Oil Filler, Installation
| 02***98 | O Ring | 1 |
| 02***43 | Cap, Oil Filler | 1 |
| 13***5D | Setscrew, M10 X 20 | 2 |
U5-4-1 Filter, Oil & Cooler
| 02***16 | Plug, Pipe | 1 |
| 02***33 | Spring, Oil Relief Valve | 1 |
| 02***32 | Valve, Oil Pressure Relief | 1 |
U5-2-1 Pump, Oil
| 02***32 | Screw | 4 |
| 02***11 | Pump, Oil | 1 |
U5-1-2 Oil Level Dipstick, & Tube
| 24***09 | Grommet | 1 |
| 33***56 | Dipstick, Assembly | 1 |
| 33***58 | Dipstick, Engine Oil | 1 |
U6-2-1 Fuel Manifold, & Injection Pipes
| 02***80 | Screw, M8 X 50 | 4 |
| 02***36 | Retainer, Fuel Pipe Connector | 6 |
| 02***34 | Valve, Pressure Relief | 1 |
U6-4-1 Fuel Pipes, Fuel Tank To Filter
| 13***9D | Setscrew | 1 |
| 13***1D | Screw, M12x45 | 2 |
| 13***3D | Nut, M6 Lock | 1 |
U6-7-1 Filter, Fuel
| 02***87 | Screw | 2 |
| 02***93 | Washer, Sealing | 2 |
| 02***96 | Connector, Quick Disconnect | 2 |
U6-3-2 Fuel System, Leak-Off Pipework
| 02***19 | Plug, Expansion, D=9.8mm | 1 |
| 02***14 | Washer, Sealing | 1 |
| 02***07 | Bolt, M8x1.25x25 | 1 |
U6-3-1 Fuel Pipes, Filter To Fuel Pump
| 02***43 | Hose, Fuel Feed | 1 |
| 02***44 | Hose, Fuel Feed | 1 |
U6-5-1 Injectors, Fuel
| 02***08 | Screw | 12 |
| 02***08 | O Ring | 1 |
| 02***31 | Connector | 6 |
U6-6-1 Filter, Fuel Sediment
| 02***46 | O Ring | 1 |
| 02***41 | Plug, Threaded | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
U6-1-1 Pump, Fuel Injection
| 02***17 | Nut | 3 |
| 02***81 | Nut | 1 |
| 02***82 | Washer, Spring | 1 |
U6-6-2 Filter, Fuel Sedimenter
| 02***05 | Plug | 1 |
| 32***63 | Element, Fuel Water/Sediment, Filter Cartridge | 1 |
| 33***52 | G.A, Fuel Supply | 0 |
U6-4-2 Fuel Pipes, Fuel Tank To Filter
| 13***9D | Setscrew | 1 |
| 13***2D | Setscrew | 2 |
| 13***3D | Nut, M6 Lock | 1 |
U7-2-1 Turbo, Pipework
| 02***47 | Adapter | 2 |
| 02***73 | Clamp, D=81.8 | 1 |
| 02***99 | O Ring | 1 |
U7-3-1 Air Compressor, & Installation
| 02***75 | O Ring | 1 |
| 02***02 | Screw, M8 X 20mm | 2 |
| 02***09 | Screw | 2 |
U7-4-1 Compressor Pipework
| 02***66 | Plug, Pipe, 3/4"Npt | 1 |
| 02***54 | Spacer | 1 |
| 02***05 | Bolt | 1 |
U7-1-1 Turbocharger
| 02***36 | Nut | 4 |
| 02***78 | Stud | 4 |
| 02***46 | O Ring | 1 |
U7-5-1 Compressor, & Installation, Air Conditioning
| 13***1D | Bolt, M8 X 110mm | 4 |
| 14***7D | Washer, M8 Plain | 4 |
| 33***31 | G.A, Air Con Installation | 1 |
2155 serial number reference
For the JCB Fastrac 2155, the machine identification plate is located on the chassis/frame. This plate contains the 17-digit Vehicle Identification Number (VIN), the engine serial number, and the transmission serial number. The VIN structure includes a manufacturing code, engine type code (26 = 2155), transmission type code, vehicle max speed code, authenticity code, and year code. Verify applicability with a JCB dealer if the plate is unreadable.
| Prefix | Identifies | Notes |
|---|---|---|
| 00742003-00742999 | JCB Fastrac 2155 4WD Tractor. Applies to the specific service manual the OEM part reference-2 for the 2155 model, identifying the machine serial number plate location and VIN structure. | The 17-digit Vehicle Identification Number (VIN) and the serial numbers of the engine and transmission are stamped on the machine identification plate. The VIN structure includes a manufacturing code, engine type code (26 = 2155), transmission type code, vehicle max speed code, authenticity code, and year code. Verify applicability with a JCB dealer if the plate is unreadable. |
Frequently asked questions
What engine does the JCB 2155 use?
The JCB 2155 is powered by an 11-liter turbocharged diesel engine. Power output varies by configuration, ranging from 119 kW (160 hp) to 179 kW (240 hp). The engine is part of JCB's Dieselmax family and does not require DEF or DPF.
What is the operating weight of the JCB 2155?
The JCB Fastrac 2155 has an operating weight of approximately 7.3 tonnes (16,093 lb). Weight varies slightly by configuration, including tire size and attachment package.
What model replaced the JCB 2155?
The JCB 2155 was replaced by the JCB Fastrac 3155 and 3185 in the subsequent generation of the Fastrac high-speed tractor line. The 2155 itself replaced the JCB Fastrac 2150 in 2004.
What 2155 owners discuss
What engine specifications and common failures are associated with the JCB Fastrac 2155?
The JCB Fastrac 2155 is powered by a 4.8-liter, 6-cylinder, turbocharged, liquid-cooled diesel engine producing 217 hp (162 kW) and 840 Nm of torque. Early DieselMax engines (Tier 2 and early Tier 3) are prone to big-end bearing failures on the crankshaft if oil change intervals are stretched or oil quality is poor. Fuel injection pump faults are also common on these earlier mechanical and early electronic engines. Worn piston rings are a frequent cause of power loss, often requiring a rebuild rather than a simple repair. Unusual noises, such as a deep rhythmic knocking that increases under load, indicate serious internal engine damage.
What are the known hydraulic and transmission behaviors for the JCB Fastrac 2155?
The machine uses a closed-center, load-sensing hydraulic system with a pump flow rate of 140 l/min and a maximum pressure of 210 bar. Common issues include hydraulic system failure and slow operation when the rear end is lower than the front, indicating oil starvation to the pump. Transmission problems are frequent, with clutch pack wear being a primary suspect for shifting delays. Contamination in the hydraulic system can cause sluggish shifting; cleaning the tank and changing filters often restores performance. The transmission offers 54 forward and 18 reverse speeds in some configurations, or a powershift with 6 forward and 3 reverse gears in others.
What electrical and sensor issues are commonly reported by JCB Fastrac 2155 owners?
Owners frequently report electrical system issues and steering difficulties. A specific fault code, 040, is associated with the four-wheel steering system and may appear shortly after ignition or after driving. Code C125 has also been reported. On similar JCB models, the centering switch on the front right is a known failure point for steering-related codes. Other common electrical faults include a non-working tachometer, fuel gauge failure, and power steering leaks attributed to failing O-rings. The machine is equipped with a 12V/130Ah battery and a 12V/140A alternator.
What are the typical wear patterns and undercarriage/steering considerations for this machine?
The JCB Fastrac 2155 is a high-speed agricultural tractor (top speed 60-70 km/h) rather than a construction excavator, so it does not have a traditional undercarriage. However, steering components are critical wear points. The orbital steering valve is a common fault on older JCB machines and often leaks. Tire wear can be excessive, particularly on the rear tires (size 650/65 R42 or 540/65 R42 depending on configuration). Hydraulic hoses are prone to blowing due to regenerative spikes or poor crimping, with some owners reporting multiple hose failures. The machine requires specific metric English fittings for hoses, which may not be widely stocked.
What engine oil and hydraulic fluid specifications should be used for the JCB Fastrac 2155?
JCB recommends using JCB Genuine Service Fluids to maintain warranty and performance. For the engine, JCB 15W/40 Multigrade oil is specified for temperatures between -10°C and 50°C (14°F to 122°F), while JCB 10W/30 is used for colder conditions (-15°C to 30°C / 5°F to 86°F). New machines are filled with JCB 10W/30 at the factory. For the hydraulic system, JCB Genuine Hydraulic Oil is required. The cooling system capacity is approximately 10 liters (2.6 gallons), and the engine crankcase holds approximately 6.0 to 6.5 liters (1.6 to 1.7 gallons) depending on the specific variant.
What is the serial number range and identification method for the JCB Fastrac 2155?
The JCB Fastrac 2155 was manufactured from 2007 to 2014. The service repair manual covers serial numbers from the OEM part reference to the OEM part reference. The machine uses a 17-digit Vehicle Identification Number (VIN). On the serial number plate, the engine type code '26' identifies the 2155 model (distinct from '25' for the 2170). The 10th character of the 17-character PIN encodes the manufacturing year using a letter code that skips I, O, Q, U, and Z. The serial number plate is typically located on the body or framework, and the engine and transmission serial numbers are also stamped there.
What should be checked when buying a used JCB Fastrac 2155?
When inspecting a used JCB Fastrac 2155, verify the engine oil history to check for big-end bearing wear, especially on early Tier 2/3 models. Test the four-wheel steering system for fault codes 040 and C125, and check the orbital steering valve for leaks. Inspect all hydraulic hoses for signs of bursting or poor crimping. Check the transmission for smooth shifting across all gears, noting any delays that might indicate clutch pack wear or hydraulic contamination. Verify the operation of the tachometer and fuel gauge, as these are common electrical failures. Ensure the cooling system is flushed and filled with the correct coolant, and check for power steering leaks around the O-rings. Have your dealer verify the serial number plate and engine type code to confirm the exact configuration and year.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 2155 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.