JCBconstructionbackhoe loader 3cx,4cx,214,215,217
Jcb 214e-LL
Maintenance schedule, common problems & OEM parts breakdown
The JCB 214e-LL is a backhoe loader manufactured from 1997 to 2004, featuring a Perkins 1004 Series engine with 76 hp. Operating weight ranges from 6.75 to 7.74 tons depending on configuration. It succeeded the JCB 214 and was followed by the JCB 216. Configurations include 2WD, 4WD, and Max-Trac options.
The 214e-LL introduced a unitized one-piece mainframe and fully enclosed engine compartment compared to earlier models. It matters in the used market for its durable heavy-duty build and accessible maintenance points. The 500-hour oil interval reduces downtime compared to competitors, making it a cost-effective choice for utility and municipal work.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 214e-LL specifications
Engine
| Model | Perkins 1004 Series |
| Gross Power | 76 HP (56.7 kW) |
| Net Power | 72 HP (53.7 kW) |
| Displacement | 259 cu. in. (4.25 L) |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight (214e-2WD, Base Unit) | 5,919 kg (13,046 lb) |
| Operating Weight (214e-4WD, Base Unit) | 6,069 kg (13,376 lb) |
| Operating Weight (214e-2WD, Cab) | 6,519 kg (14,368 lb) |
| Operating Weight (214e-4WD, Cab) | 6,669 kg (14,698 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 7.01 m (23 ft 276 in) |
| Transport Height (Standard Backhoe) | 3.40 m (11 ft 134 in) |
| Overall Width | 2.24 m (7 ft 88 in) |
| Wheelbase (2WD) | 2.11 m (6 ft 83 in) |
| Wheelbase (4WD) | 2.16 m (7 ft 85 in) |
| Ground Clearance (Mainframe) | 0.36 m (1 ft 14 in) |
| Ground Clearance (Front Axle) | 0.36 m (1 ft 14 in) (2WD); 0.25 m (0 ft 10 in) (4WD) |
Performance
| Travel Speed (Gear 1) | 5.5 kph (3.4 mph) |
| Travel Speed (Gear 2) | 8.2 kph (5.1 mph) |
| Travel Speed (Gear 3) | 17.5 kph (10.9 mph) |
| Travel Speed (Gear 4) | 20.6 mph (33.2 kph) |
| Lift Capacity | 6,750 lb |
| Breakout Force | 11,730 lb |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 83.2 L (18.3 UK gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | 11.1 L (2.5 UK gal) |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
214e-LL fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 11.1 L (2.5 US gal) | JCB 15W/40 Multigrade (climate: -10°C to 50°C / 14°F to 122°F) |
| Cooling System | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Fuel Tank | 83.2 L (18.3 UK gal) | Diesel Oil (See Types of Fuel) |
| Transmission/Powertrain | Not documented for this exact serial range — verify with your dealer | JCB Super Universal Agricultural (climate: -15°C to 30°C / 5°F to 86°F) |
| Final Drives (each) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System and Tank | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Axles/Differentials | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease | N/A | JCB Grease (Long life protection; outstanding performance in challenging environments; significant load handling capacity) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 214e-LL maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 214e-LL beyond the schedule
Predictive Maintenance & Fluid Analysis
Take oil samples at the 500-hour interval from the engine, hydraulic, and axle systems to establish a baseline. Monitor hydraulic oil for contamination and check the hydraulic return filter magnet for metallic debris. Use JCB 15W/40 Multigrade engine oil meeting API specifications. Replace the hydraulic oil and clean the tank at 2000 hours to prevent component wear. Track fluid levels daily to catch leaks early.
Corrective & Common Repairs
Address faulty EOS (Engine Oil Solenoid) switches that cause fuel flooding, hard starting, and black smoke on Perkins engines. Replace the primary and secondary fuel filters to protect common-rail injectors. Inspect the turbocharger shaft play and charge cooler boots for leaks. Check the alternator and starter load to prevent electrical failures. Ensure the loader arm safety strut is fitted before working under raised arms.
Overhaul & Rebuild Points
Inspect the heavy-duty one-piece mainframe and rear frame supports for cracks or unauthorized welding. Check the slew ring bolts for torque on compatible configurations. Measure undercarriage wear against JCB limits for track models. Inspect the transmission oil for contamination after major repairs. Replace the hydraulic pump drive shaft seal if leakage occurs. Verify the condition of the grease seals at vital backhoe joints.
Seasonal & Environment Servicing
Use JCB Super Universal Agricultural oil for temperatures between -15°C and 30°C. Switch to JCB 15W/40 Multigrade for -10°C to 50°C. Clean the hydraulic oil cooler tubes and fins regularly to prevent overheating. Check the air filter restriction indicator more frequently in dusty environments. Inspect the cooling system hoses and pressure test the radiator cap annually. Ensure the cab HVAC system functions correctly for operator comfort.
214e-LL common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 32/925423 | Element, Fuel Filter | Fuel system service | Check fitment → |
| 32/925366 | Filter, Fuel Sediment | Fuel system service | Check fitment → |
| 32/925371 | Element, Fuel Sediment Filter | Fuel system service | Check fitment → |
| 32/925372 | Bowl, Fuel Sediment Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
214e-LL fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel Rail Pressure Too Low | Clogged fuel filters or failing lift pump. | Check fuel filter condition and fuel pump pressure. |
| P0117 | Engine Coolant Temperature Sensor Circuit Low Voltage | Faulty coolant temperature sensor or wiring issue. | Inspect sensor connector for corrosion and test sensor resistance. |
| P0521 | Engine Oil Pressure Sensor Range/Performance Issue | Faulty oil pressure sensor or low oil level. | Verify oil level and test sensor signal output. |
| P2047 | DEF/AdBlue Injector Circuit Open | SCR system fault or injector circuit failure. | Check injector wiring and DEF fluid quality. |
| U0100 | Lost Communication with Engine Control Module | CAN bus communication failure or loose battery terminal. | Check battery voltage and ground strap connections. |
| 101 | Low Transmission Clutch Pressure | Hydraulic system pressure loss or transmission fault. | Check hydraulic fluid levels and transmission pressure. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
214e-LL attachments & work tools
Loader Buckets
The JCB 214e-LL utilizes a standard tool carrier quick-attach system for front-end buckets. Factory specifications for the 214e Series 4 indicate a standard 1.25 cubic yard (0.96 m³) bucket capacity with a width of 2.24 meters (7.35 ft). Available profiles include Deep Profile, Ditch Maintenance, Grading, Heavy Duty, Jaw, Ribbed, Tapered Ditching, and Tilting Grading buckets. The bucket features a dual-position tipping link to maximize tearout force or rotation for straight-wall digging.
Backhoe Buckets
The rear backhoe assembly supports standard digging buckets with a width of 2.24 meters (7.35 ft) for the 214E class. The machine offers a 14-foot (4.27 m) backhoe stick in two options: the classic dipper or an extra-deep dig version for increased reach. The backhoe is designed for dredging depths up to 4.45 meters (14.6 ft) and includes heavy-duty features such as 1x18 inch (25x457 mm) cutting edges and box section cross-straps.
Thumb Attachments
Compatible thumb attachments for the JCB 214E class typically range from 36 inches (914 mm) to 42 inches (1067 mm) in length. Options include mechanical thumbs with manual position adjustment and fully hydraulic thumbs that retract against the stick using machine hydraulics. Fixed thumb configurations such as 12x40 inch (305x1016 mm) or 17x40 inch (432x1016 mm) are also referenced for this machine size.
Hydraulic Breakers
JCB manufactures a dedicated range of hydraulic breakers designed for use on JCB backhoes. A wide variety of tools are available for these breakers to suit different material densities. The breaker system requires specific hydraulic flow and pressure arrangements to operate effectively with the machine's hydraulic circuit.
Cab and Canopy Options
Operators can choose between an open canopy or an enclosed cab for the 214e-LL. The enclosed cab includes ergonomic controls, safety features, and heating. The machine utilizes a signal key that locks and secures the fuel, cab, hydraulic, and engine systems for security.
Steering and Drive Configurations
The 214e-LL is available in 2WD and 4WD configurations. The machine features JCB Max-Trac with outboard planetary drive and limited slip steer drive axles front and rear. Three steering modes provide maximum flexibility, and the transmission offers synchronized shifting in all gears with power shift between forward and reverse.
All 214e-LL assemblies by section
Every catalogued assembly group for the Jcb 214e-LL. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-7-2 Shovel, Clam, 6 In 1, 7'4" Wide 1.0m3
| 12***23 | Bush | 2 |
| 12***45 | Toeplate, 6 In 1 Shovel, 7'4" Wide | 1 |
| 12***74 | Pivot, Casting, Right Hand | 1 |
A1-8-2 Shovel, Clam, 6 In 1, 2350mm (7'8.5") Wide, Quickhitch
| 12***23 | Bush | 2 |
| 12***62 | Toeplate, 2343mm Long | 1 |
| 12***44 | Toeplate, 6 In 1, 7'8" Wide | 1 |
A1-4-2 Shovel, G.P 1.1m3, 2350mm (7'8.5") Wide, Quickhitch
| 12***04 | Toeplate | 1 |
| 12***86 | Shovel, Gp 1.1m3 Heavy Duty, Quickhitch 2350mm | 1 |
A1-1-1 Shovel, G.P 1.0m3, 2253mm (7'4") Wide
| 12***23 | Toeplate | 1 |
| 12***65 | Shovel, Gp 1.0m3, 7'4" Wide | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A1-1-2 Shovel, G.P 1.0m3, 2253mm (7'4") Wide, Heavy Duty
| 12***56 | Toeplate | 1 |
| 12***74 | Shovel, Gp 1.0m3 7'4" Wide, Heavy Duty | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A1-7-1 Shovel, Clam, 6 In 1, 7'4" Wide 1.0m3
| 12***23 | Bush | 2 |
| 12***49 | Bracket, Indicator | 1 |
| 12***45 | Toeplate, 6 In 1 Shovel, 7'4" Wide | 1 |
A2-1-1 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 6 |
A2-1-5 Bucket, Ribbed
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 6 |
A2-1-6 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 82***70 | Washer | 2 |
A2-3-1 Blade, Grading 5'
| 13***1Z | Nut | 6 |
| 14***11 | Washer | 6 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-1-2 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 7 |
A2-2-1 Bucket, Tapered Ditc, Hing
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-2-1 Blade, Back Fill
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-1-7 Bucket, Heavy Duty
| 10***04 | Boss, Pivot | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 82***70 | Washer | 2 |
A2-1-3 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 8 |
A2-1-13 Bucket, Heavy Duty
| 13***4Z | Bolt | 2 |
| 13***1Z | Nut | 6 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
A2-1-9 Bucket, Standard, Spanish Build
| 10***04 | Boss, Pivot | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 80***32 | Bush, Spring | 4 |
A2-1-12 Bucket, Standard
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***73 | Pin, Pivot | 2 |
| 13***4Z | Bolt | 2 |
A2-3-2 Blade, Grading 6'
| 13***1Z | Nut | 8 |
| 14***11 | Washer | 8 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-1-4 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 7 |
A2-2-1 Tooth, Ripper
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A3-25-4 Circuit, Compactor, Backhoe Attachment
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
A3-6-2 Quickhitch, Attachment,Loader
| 12***56 | Handle, Grip | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***7Z | Bolt | 3 |
A3-34-1 Pump, Submersible
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***02 | Nut | 1 |
| 13***8Z | Capscrew | 6 |
A3-23-3 Earth Drill, Gearbox
| 98***02 | Gearbox, Earth Drill | 1 |
| 98***03 | Housing, Output | 1 |
| 98***04 | Shaft, Output | 1 |
A3-26-10 Tilt And Pitch, Control Hydraulic
A3-7-3 Toeplate Option, 225, 3mm (7'4") Shovel
| 13***01 | Nut | 24 |
| 14***11 | Washer | 8 |
| 53***05 | Tooth | 8 |
A3-26-1 Hitch Rear, Jcb 3 Point
| 12***02 | Bush | 2 |
| 12***22 | Bush, Steel | 2 |
| 13***9Z | Setscrew, M8x35 | 3 |
A3-22-4 Circuit, Patch Planer 400 Mk2
| 13***9Z | Bolt, M10x90mm | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 5 |
| 14***26 | Washer, Seal | 1 |
A3-6-5 Quickhitch, Industrial,Hydraulic, Superseded - See A3-6-8
| 13***3Z | Screw, 1/4 Unf X .625 | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Screw, M6x16 | 12 |
A3-2-1 Guard, Tooth, Optional, 2350mm (7'8.5") Wide Shovels
| 12***00 | Bracket | 1 |
| 12***00 | Guard, Tooth, 2350mm (7'8.5") Wide | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
A3-26-12 Weight Tray Assembly, Rear
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-24-5 Quickhitch, Attachment, Backhoe
| 12***57 | Latch | 1 |
| 12***61 | Bolt, Trunnion | 2 |
| 12***62 | Pin, Pivot | 1 |
A3-6-1 Quickhitch, Attachment,Loader, Superseded,See A3-6-2
| 12***56 | Handle, Grip | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***7Z | Bolt | 3 |
A3-2-3 Guard, Tooth, Optional, 2253mm (7'4") Wide Shovels
| 12***00 | Guard, Tooth | 1 |
| 12***00 | Bracket | 1 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
A3-4-1 Crane, Fork Mounted
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***39 | Attachment, Crane Hook Assembly, Fork Mounted | 1 |
A3-24-2 Quickhitch, Attachment, Backhoe
| 12***18 | Hook | 1 |
| 12***19 | Plate, Retaining | 1 |
| 12***21 | Pin, Locking | 1 |
A3-24-3 Quickhitch, Dedicated, Backhoe Attachment
| 13***0Z | Bolt, M16 X 40mm | 2 |
| 14***7Z | Washer | 2 |
| 14***07 | Nipple, Grease | 2 |
A3-23-4 Earth Drill, Motor
| 92***71 | Key | 1 |
| 99***21 | Kit-Seal, Earthdrill Motor | 1 |
A3-22-5 Patch Planer, 400mk2
| 13***4Z | Bolt | 4 |
| 13***4Z | Bolt, M20 X 60mm | 8 |
| 13***5Z | Bolt | 2 |
A3-26-5 Lower Links, Ball Type Category 1
| 14***99 | Bush, Top Link; See Note 1. Fit Bush Item 1 To Pitch Control Ram Or Turnbuckle When Using Category 1 Type Power Links, Bush, Top Link | 1 |
| 14***00 | Arm, Lift, Right Hand | 1 |
| 14***00 | Arm, Lift, Left Hand | 1 |
A3-11-10 Shovel, Left Hand Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-7-3 Tooth Option, 2253mm, (7'4") Shovel
| 13***01 | Nut | 24 |
| 14***11 | Washer | 8 |
| 53***05 | Tooth | 8 |
A3-9-1 Concrete Skip
| 11***00 | Pin, Lynch, With Chain | 1 |
| 54***00 | Skip, Assembly | 1 |
| 54***01 | Spring, Shuttle | 2 |
A3-8-1 Fork Frames & Forks, Industrial
| 12***74 | Fork, 2t S.W.L. | 1 |
| 98***00 | Frame, Fork | 1 |
| 98***00 | Guard, Load | 1 |
A3-1-5 Fork Lift, 6 In 1 Clam Shovel, Mounted 1.0m3
| 12***32 | Pin, Pivot | 2 |
| 12***93 | Bracket, Fork Rail Support | 2 |
| 12***94 | Bracket, Fork Rail Support | 1 |
A3-23-2 Earth Drill
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, M16 | 10 |
A3-6-10 Quickhitch, Manual
| 12***56 | Handle, Grip | 1 |
| 13***7Z | Bolt | 3 |
| 13***3Z | Bolt, M6x55 | 1 |
A3-26-6 Lower Links, Claw Type Category 2
| 14***15 | Ball, Lower Link | 2 |
| 14***00 | Link, Claw Assembly, L.H. Lower | 1 |
| 14***00 | Link, Claw Assembly, R.H.Lower | 1 |
A3-6-8 Quickhitch, Industrial,Hydraulic
| 12***26 | Plate, Shovel Stop, 12mm | 2 |
| 13***1Z | Screw | 2 |
| 13***3Z | Screw, M6x16 | 8 |
A3-23-10 Earth Drill, Attachments
| 13***4Z | Bolt | 3 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
A3-10-1 Snow Plough
| 99***00 | Blade, Dozer, Snow | 1 |
| 99***01 | Frame | 1 |
| 99***02 | Toeplate | 1 |
A3-6-4 Quickhitch, Industrial, Hydraulic
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***18 | Bolt | 2 |
| 13***3Z | Nut | 4 |
A3-26-14 Counterweight, Assembly, Rear, Loader Landscaper
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 2 |
| 13***2Z | Bolt, M20 X 120mm | 2 |
| 13***8Z | Bolt, M20 X 360 | 2 |
A3-7-1 Tooth Option, 2350mm, (7'8.5") Shovel
| 13***01 | Nut | 8 |
| 13***1Z | Nut | 16 |
| 14***11 | Washer | 8 |
A3-25-3 Compactor, Backhoe Attachment
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***7Z | Bolt | 16 |
A3-7-1 Toeplate Option, 235, 0mm (7'8.5") Shovel
| 13***01 | Nut | 8 |
| 13***1Z | Nut | 16 |
| 14***11 | Washer | 8 |
A3-1-6 Fork Lift, Gp Shovel Mounted
| 12***32 | Pin, Pivot | 2 |
| 12***27 | Fork | 2 |
| 12***96 | Block, Rubber Pad | 2 |
A3-11-1 Shovel, Right Hand Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
B Bodywork, Cab, Loader End
B1-6-1 Grille, Front, 2ws
| 12***31 | Grille, Assembly, Front | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
B1-5-1 Bonnet
| 12***43 | Buffer | 1 |
| 12***79 | Strut, Door Stay | 2 |
| 12***52 | Strut, Gas, Assembly | 2 |
B1-13-5 Mountings, Hydraulic Valve, 3 Point Hitch
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***10 | Screw, Cap | 2 |
B1-7-1 Step, Cab Access, Hydraulic Tank Side
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 8 |
| 13***3Z | Nut, Lock, M10 | 8 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
B1-14-1 Firewall Panel
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
| 24***12 | Grommet | 2 |
B1-11-1 Engine Sidepanel, 2ws
| 12***08 | Latch, Plate & Lock | 1 |
| 12***10 | Panel, Soundproofing, Access Flap | 1 |
| 12***30 | Wire, Retaining | 1 |
B1-6-2 Grille,Front, 2ws, Tier 2
| 12***31 | Grille, Assembly, Front | 1 |
| 13***9Z | Screw, M10x35mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
B1-11-2 Engine Sidepanel, 2ws, Tier 2
| 12***93 | Panel, Assembly Right Hand, No Sound Proofing | 1 |
| 12***97 | Panel, Assembly Right Hand, With Sound Proofing | 1 |
| 12***07 | Panel, Assembly,Left Side, No Soundproofing | 1 |
B1-13-1 Valve Mountings, Excavator & Loader
| 12***89 | Plate, Loader Valve Mount | 1 |
| 12***51 | Bracket, Loader Lever | 1 |
| 13***0Z | Bolt, M10 X 40 | 12 |
B1-10-14 Pads, Street, Stabiliser, Centremount
| 12***61 | Pad, Street | 2 |
| 12***62 | Roller | 1 |
| 12***63 | Sleeve | 1 |
B1-3-1 Tank, Diesel Fuel, 130 Litres
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***93 | Strainer, Fuel, Guaze; Replaced By 12***11, See San10198 | 1 |
| 12***41 | Cover, Battery Box | 1 |
B1-1-25 Chassis, Loader Landscaper, 2ws
| 33***23 | Chassis, 214e Loader Leveller | 1 |
| 80***93 | Bearing, Liner | 2 |
| 80***02 | Bearing, Liner | 4 |
B1-8-30 Mudguards, Rear, Black, Optional
| 13***5Z | Bolt | 12 |
| 14***1Z | Washer | 12 |
| 14***6Z | Washer, Spring | 12 |
B1-10-12 Pads, Street, Stabiliser, Centremount
| 10***47 | Pin, Pivot | 2 |
| 12***71 | Strip, Rubber | 19 |
| 12***72 | Clamp, Street Foot | 1 |
B1-14-2 Firewall,Panel, Tier 2
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
| 24***12 | Grommet | 2 |
B1-2-1 Tank, Hydraulic
| 12***56 | Seal, Cap | 1 |
| 12***17 | Cover, Plate | 1 |
| 12***53 | Gauge, Sight | 1 |
B1-1-20 Chassis Centremount, 2ws
| 12***00 | Frame, Rear Centremount | 1 |
| 33***95 | Chassis, 214e 2ws Centremount | 1 |
| 33***19 | Chassis, 214e,2ws,Centremount, Tier 2 | 1 |
B1-8-20 Mudguards, Rear, Yellow
| 13***5Z | Bolt | 12 |
| 14***1Z | Washer | 12 |
| 14***6Z | Washer, Spring | 12 |
B1-15-3 Top Link Retainer, 3 Point Hitch
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***96 | Top, Link, Retainer | 2 |
B1-13-2 Valve Mounting, Loader, Loader/Landscaper
| 12***89 | Plate, Loader Valve Mount | 1 |
| 12***51 | Bracket, Loader Lever | 1 |
| 13***0Z | Bolt, M10 X 40 | 5 |
B1-15-1 Bracket, Coupler Mounting, 3 Point Hitch
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 5 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 33***50 | Bracket | 1 |
B1-5-2 Bonnet, Tier 2
| 12***43 | Buffer | 1 |
| 12***15 | Bonnet, 2ws,Soundprfd,Tier 2, As Supplied | 1 |
| 13***3Z | Screw, M8 X 16 | 2 |
B1-9-10 Mudguards, Front, Black, Optional, 2ws
| 12***93 | Bracket, Upper, Left Hand | 1 |
| 12***94 | Bracket, Upper, Right Hand | 1 |
| 12***74 | Fender, Front Left Hand, Black, 343mm Wide | 1 |
B1-4-2 Stabiliser, Centremount
| 10***19 | Pin, Pivot | 2 |
| 10***47 | Pin, Pivot | 2 |
| 12***03 | Leg, Stabiliser, Centremount | 2 |
B2-4-1 Window, Side, Opening
| 11***22 | Handle | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
B2-6-20 Soundproofing, Cab Roof
| 12***94 | Bracket, Support | 1 |
| 33***83 | Liner, Roof | 1 |
| 82***54 | Washer, Plain | 3 |
B2-2-1 Cab Glazing, Tinted, Direct Glazing
| 82***24 | Windscreen, Green Tinted, Laminated | 1 |
| 82***25 | Glass, Right Hand 1/4 Light, 1 Piece; Replaced By 82***70, See San 10301 | 1 |
| 82***26 | Glass, Left Hand 1/4 Light, 1 Piece; Replaced By 82***69, See San 10301 | 1 |
B2-23-1 Cab Roof, Uk & World
| 12***47 | Spacer | 2 |
| 12***50 | Roof, Cab, Uk & World, Yellow | 1 |
| 12***40 | Roof, Cab, Black | 1 |
B2-9-1 Covers, Vandal Resistant, 3 Point Hitch
| 12***21 | Padlock | 1 |
| 12***39 | Catch | 1 |
| 14***25 | Plate, Spacer | 1 |
B2-6-5 Soundproofing, Cab Base, Loader/Landscaper
| 12***73 | Mat, Soundproofing, Bulkhead | 1 |
| 12***20 | Mat, Brake Cylinder | 2 |
| 12***40 | Panel, Seal Support | 1 |
B2-15-1 Handbook Case
| 13***3Z | Screw, M6x16 | 4 |
| 15***01 | Holder, Handbook | 1 |
| 82***01 | Nut, Rivet,M6 Open Ended, For 3 To 5.5mm Plt | 4 |
B2-1-1 Cab Shell, Unglazed
| 12***91 | Washer, Nylon | 4 |
| 12***67 | Cover, Heater | 1 |
| 12***49 | Cover, Heaterless Cab | 1 |
B2-25-1 Luggage Nets
| 26***01 | Net, Stowage | 1 |
| 82***33 | Screw | 4 |
B2-1-10 Cab Glazing
| 25***03 | Jet, Screen Washer | 1 |
| 33***83 | Liner, Roof | 1 |
| 64***25 | Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 3000mm, Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 2500mm, Tube, 5 Metres Long, Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1200mm (600mm Per Pump To Valve), Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1400mm (700mm Per Pump To Valve), Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 5000mm, Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 4000mm | 0 |
B2-23-2 Cab Roof, Usa
| 12***47 | Spacer | 2 |
| 12***39 | Roof, Cab,Usa, Yellow | 1 |
| 12***32 | Roof, Cab,Usa, Black | 1 |
B2-24-1 Cover, Harness'S
| 12***75 | Cover | 1 |
| 12***76 | Bracket, Pedal Cover | 1 |
| 13***3Z | Screw; Replaces 69***21 | 6 |
B2-13-1 Cab Rear Valance, Centremount
| 12***03 | Cover, Rear Valance | 1 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B2-11-1 Mirror, Interior
| 12***71 | Mirror, Interior Assembly | 1 |
| 12***75 | Glass, Interior Mirror | 1 |
| 33***44 | Mirror, External Head Assembly | 2 |
B2-10-1 Cab Mountings
| 13***2Z | Bolt, M16 X 120 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
B2-18-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-6-1 Soundproofing, Cab Base
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 12***20 | Floormat | 1 |
| 12***72 | Mat, Soundproofing, Loader Valve | 1 |
B2-12-1 Cab - Tower Moulding
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 33***57 | Moulding, Left Hand Tower, 214e | 1 |
B2-7-12 Seat, Low Back, Suspension, Pvc & Fabric, Silver Control Knobs
| 12***33 | Seat, Low Back,Vinyl, Assembly | 1 |
| 12***34 | Seat, Low Back,Fabric, Assembly | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-3-1 Door
| 12***05 | Bolt, Closing | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***29 | Grommet | 1 |
B2-1-30 Canopy
| 12***71 | Canopy, Frame | 1 |
| 14***83 | Hook, Coat | 1 |
| 33***81 | Cover, Left Hand B Post | 1 |
B2-7-10 Seat, Suspension
| 12***62 | Seat, Assembly Suspension, Vinyl As Supplied | 1 |
| 12***63 | Seat, Assembly Suspension, Cloth, As Supplied | 1 |
| 12***98 | Seat, Assembly Suspension, Vinyl | 1 |
B2-8-2 Wash/Wipe, Front & Rear Screen, Tier 2
| 12***05 | Spacer | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 14***3Z | Washer | 2 |
B2-5-1 Window, Rear Opening
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
B2-7-1 Seat, Static
| 12***61 | Seat, Assembly, Static, Vinyl | 1 |
| 12***98 | Seat, Assembly Suspension, Vinyl | 1 |
| 13***9Z | Bolt, M10 X 35 | 4 |
B2-8-10 Wash/Wipe, Rear Screen
| 12***70 | Bottle, Front & Rear, Sceen Wash | 1 |
| 12***31 | Bottle, Front & Rear, Screen Wash | 1 |
| 24***11 | Grommet, Groove Dia 25.4mm, Panel Thkness 2-3mm | 1 |
B2-8-1 Wash/Wipe, Windscreen
| 12***05 | Spacer | 1 |
| 12***17 | Bracket, Washer Bottle | 1 |
| 12***30 | Bottle, Front Screen Wash | 1 |
B2-2-10 Canopy Glazing
| 12***52 | Strip, Cosmetic Glazing | 2 |
| 25***03 | Jet, Screen Washer | 1 |
| 64***25 | Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 3000mm, Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 2500mm, Tube, 5 Metres Long, Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1200mm (600mm Per Pump To Valve), Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1400mm (700mm Per Pump To Valve), Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 5000mm, Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 4000mm | 0 |
B3-4-1 Safety Strut, Loader Arms
| 12***70 | Strut, Safety, 650mm | 1 |
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
B3-4-2 Safety Strut, Loader Arms, Tier 2
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
| 12***44 | Strap | 1 |
B3-1-2 Arms, Loader
| 12***54 | Arm, Loader, 214e | 1 |
| 13***8Z | Bolt, M10x80 | 2 |
| 13***2Z | Bolt, M12 X 120 | 2 |
B3-1-1 Arms, Loader
| 12***84 | Arm, Loader, 214e; Part Otp Replaced By 33***11 San 23665 23/0, 8/07 (Extra Hole & Safety Strut Moved 53mm) | 1 |
| 13***2Z | Bolt, M12 X 120 | 2 |
| 13***4Z | Bolt, M12 X 140 Lg. | 2 |
B3-3-1 Arms, Loader, Shovel Linkage
| 12***23 | Bush | 6 |
| 12***63 | Link, Crowd, 595mm Long | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
B4-8-1 Tipping Link, Standard
| 12***47 | Link, Tipping | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-6-1 Dipper (Stick), Extradig
| 10***01 | Strap | 1 |
| 12***01 | Clip | 1 |
| 12***15 | Pad, Wear Strip, Bottom, Green | 4 |
B4-11-1 Kingpost, Bulkhead
| 12***48 | Plate, Bulkhead, Kingpost | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
B4-8-20 Tipping Link, With Lifting Hook
| 12***50 | Link, Tipping | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-12-2 Kingpost Hose Clamps
| 12***68 | Clamp, 5/8" Top, Centremount | 2 |
| 12***69 | Plate, Clamp | 4 |
| 12***89 | Clamp, 5/8" Middle | 2 |
B4-8-30 Tipping Link, With Lifting Hook
| 12***49 | Link, Tipping, Max S.W.L. '5ton' | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-3-1 Kingpost, 14'0 Backhoe, Centremount
| 12***26 | Spacer | 1 |
| 12***43 | Spacer | 1 |
| 12***00 | Pin, Slewlock | 1 |
B4-4-1 Boom, Centremount
| 12***21 | Pivot, Boom Eye End Casting | 1 |
| 12***22 | Pivot, Boom Nose Casting; Superseded To Nla, San21025 | 1 |
| 12***32 | Boom, 2390mm Long | 1 |
B4-2-1 Slew/Swing, Components
| 12***37 | Seal | 4 |
| 12***28 | Disc, Blanking | 1 |
| 12***40 | Cap, Bolt Cover | 2 |
B4-10-1 Boom Lock, In Cab Controls, 14'0 Centremount
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
| 12***62 | Casting, Boom Lock, 14'0 (Yellow) | 1 |
B4-5-1 Dipper (Stick), Mono
| 10***01 | Strap | 1 |
| 12***00 | Lever, Tipping, Single Link Position | 1 |
| 12***00 | Lever, Tipping, Twin Link Position | 1 |
B5-6-1 Labels, Noise Level, Tier 2, Re & Rg Engine Builds
| 81***29 | Label, Sound Pressure, 104db Lwa | 1 |
| 81***30 | Label, Sound Pressure, 105db Lwa | 1 |
| 81***31 | Label, Sound Pressure, 106db Lwa | 1 |
B5-1-3 Decals, Loader & Excavator, Iso + Pattern Controls
| 24***04 | Seal | 26 |
| 81***80 | Decal, Extradig | 1 |
| 81***81 | Decal, Hydraclamp | 1 |
B5-4-2 Fire Extinguisher
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 26***67 | Extinguisher, Fire, Excludes Cradle | 1 |
| 82***32 | Nut, M6 Jack | 2 |
B5-1-5 Decals, Control, Loader
| 81***71 | Decal, Loader Lever, With Float, Reset | 1 |
| 81***72 | Label, Loader Auxiliary, Clamshovel | 1 |
B5-2-20 Decals, Usa Build
| 12***35 | G.A., Ga Usa Labels | 1 |
| 32***17 | G.A., Warning Decal Kit, As Supplied | 1 |
| 32***18 | G.A., Warning Labels Kit, A Supplied | 1 |
B5-5-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
B5-2-40 Decal, Machine, 214e
| 81***84 | Decal, 214e, Loader Arm | 2 |
| 81***35 | Decal, 214e, Dipper | 2 |
B5-3-1 Decals, Control, Utility
| 81***52 | Label, Controls | 2 |
| 81***20 | Label, Power Take-Off Lever | 1 |
B5-3-2 Tool Kit
| 27***00 | Bag, Tool | 1 |
| 40***12 | Grease, Cartridge 400g | 1 |
| 40***27 | Grease, Cartridge, 400g | 1 |
B5-1-1 Decals, Loader & Excavator, Jcb X Pattern Controls
| 24***04 | Seal | 26 |
| 81***80 | Decal, Extradig | 1 |
| 81***81 | Decal, Hydraclamp | 1 |
B5-1-2 Decals, Loader & Excavator, Jcb + Pattern Controls
| 24***04 | Seal | 26 |
| 81***80 | Decal, Extradig | 1 |
| 81***81 | Decal, Hydraclamp | 1 |
B5-2-41 Decal, Machine, 214e Ll
| 81***54 | Decal, 214e Ll, Loader Landscaper | 1 |
B5-2-10 Decals, 214
| 33***18 | Label, Warning, Stab Leg Hazard | 1 |
| 33***44 | Label, Seat Belt Warning | 1 |
| 33***47 | Label, Warning, 'Use The Seat Belt' | 1 |
B5-1-10 Decals, Excavator, Case Style
| 81***70 | Decal, Stabiliser Control | 1 |
| 81***77 | Decal, L Hand Case Control, Bucket & Dipper | 1 |
| 81***78 | Decal, R Hand Case Control, Boom & Auxiliary | 1 |
C Electrics-Machine, Cab & Engine
C1-5-2 Light, Working, Cab Rear
| 12***05 | Bracket | 4 |
| 12***70 | Grommet, (1 Hole) | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 0 |
C1-20-2 Harness Connectors, Repair Ip67 Standard, (C45/N.Am.)
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-12-1 Horn, Single Tone
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
C1-9-1 Alarm, Reverse, Installation, Optional
| 71***00 | Alarm, Reverse | 1 |
| 82***54 | Washer, Plain | 2 |
| 82***55 | Washer, Spring | 2 |
C1-16-1 Electrics, Machine Switches, Gauges
| 10***01 | Gasket | 1 |
| 12***05 | Cap, Fuel Sender Unit, Yellow; Superseded By 12***35 See San 20239 | 1 |
| 12***35 | Cap, Fuel Level Sensor, Black | 1 |
C1-4-2 Light, Head, 12.Volt, Right Hand Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***01 | Lens, Assembly, Headlight | 1 |
| 70***55 | Light, Head Assembly, Right Hand Dip | 2 |
C1-20-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-1-2 Harness Cab & Canopy, Machine Electrics, Tier 2
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 1 |
| 12***65 | Clip | 2 |
| 12***47 | Clip, Cable | 4 |
C1-26-1 Harness, Loader Lift, Suspension
| 70***52 | Cover, Actuator, Arm Suspension | 1 |
| 70***00 | Switch, 12v | 1 |
| 72***91 | Harness, Arm Suspension | 1 |
C1-22-1 Light, Indicator
| 12***69 | Gasket, Left Hand Indicator | 1 |
| 12***70 | Gasket, Right Hand Idicator | 1 |
| 14***07 | Washer | 4 |
C1-10-1 Pump, Diesel, Refuelling, Optional
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-4-1 Light, Head, 12.Volt, Left Hand Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***02 | Lens, Assembly, Headlight, Lh Dip | 1 |
| 70***54 | Light, Head Assembly, Left Hand Dip | 2 |
C1-2-1 Battery 12v, Carrier
| 12***65 | Clip | 1 |
| 12***59 | Clip | 1 |
| 12***73 | Stud, Clamp | 2 |
C1-3-20 Light, Rear, Roof Mounted
| 13***1Z | Nut, M5-8 | 4 |
| 14***7Z | Washer | 4 |
| 70***00 | Light, Rear | 2 |
C1-5-1 Light, Working, Cab Front
| 14***07 | Screw | 4 |
| 70***03 | Spring | 2 |
| 70***00 | Light, Front Working | 2 |
C1-1-1 Harness Cab & Canopy, 2ws Machine Electric, Shuttle Transmission
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 5 |
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
C2-14-2 Alternator, 12volt-85amp
| 71***54 | Alternator, 85a-12v | 1 |
C2-15-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***98 | Spacer | 1 |
| 02***53 | Lever, Alternator Adjusting | 1 |
C2-3-1 Alternator, 75amp
| 71***53 | Alternator, 75a-12v | 1 |
C2-3-2 Alternator, 85amp, Optional
| 71***54 | Alternator, 85a-12v | 1 |
C2-11-1 Electrical Equipment, Naturally Aspirated, Re Build
| 12***95 | Clip, Harness Support | 3 |
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
C2-1-1 Electrical Equipment, Ar Builds
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
| 17***04 | Nut | 1 |
C2-4-1 Alternator Mountings
| 02***62 | Lever, Alternator Adjusting | 1 |
| 02***77 | Bracket, Lever Support | 1 |
| 02***17 | Bracket, Alternator Mounting | 1 |
C2-1-2 Electrical Equipment, Ak Builds
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
| 17***04 | Nut | 1 |
C2-13-1 Motor, Starter, 12volt
| 02***03 | Stud | 3 |
| 02***59 | Nut | 3 |
| 71***31 | Motor, Starter - 12volt | 1 |
C2-11-2 Electrical Equipment, Turbocharged, Rg Build
| 12***95 | Clip, Harness Support | 3 |
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
C2-14-1 Alternator, 12volt-75amp
| 71***53 | Alternator, 75a-12v | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-12-1 Circuit, Glow Plug
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-6-5 Switches, Lights, Heater & Wiper, Loader/Landscaper
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***26 | Actuator, Front Worklights, Switch Decal | 1 |
| 70***27 | Cover, Rear Working Lights, Switch Decal | 1 |
C3-7-2 Fuse Box & Relays, Shuttle Transmission
| 12***34 | Bracket, Fuse Mounting | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Nut, M5-8 | 2 |
C3-6-1 Switches, Lights, Heater & Wiper, 2ws
| 70***00 | Switch, Ignition; Replaced By 70***84, See San 11449 | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***01 | Cover, 4wd Switch Decal | 1 |
C3-2-1 Cover, Column Switch
| 12***14 | Bracket, Switch Cover Mount | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 14***7Z | Washer | 1 |
C3-5-1 Heater, Installation
| 12***62 | Cover, Front Right Hand, Lower Moulding; Replaced By 12***70, See San 12906 | 1 |
| 12***85 | Console, Heater | 1 |
| 12***80 | Adapter, Air Vent Outlet | 1 |
C3-18-1 Interior Mouldings, Air Ducting, Basic Heater
| 12***92 | Plate, Switch | 1 |
| 12***62 | Cover, Front Right Hand, Lower Moulding; Replaced By 12***70, See San 12906 | 1 |
| 12***85 | Console, Heater | 1 |
C3-13-1 Cover, Vandal Proof, Instrument Panel
| 12***86 | Catch, Vandal Cover | 1 |
| 12***91 | Washer, Nylon | 1 |
| 12***67 | Plate, Switch & Gauge, Vandal Proof | 1 |
C3-18-5 Interior Mouldings, Air Ducting, Loader/Landscaper
| 12***31 | Vent, Air Register | 1 |
| 12***62 | Cover, Front Right Hand, Lower Moulding; Replaced By 12***70, See San 12906 | 1 |
| 12***88 | Console, Loader Controls | 1 |
C3-4-20 Switch, Column, Shuttle Transmission
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
| 70***95 | Switch, Column, Manual Trans | 1 |
C3-17-1 Fan, Face Level, Optional
| 12***11 | Cover, Fan Harness | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
C3-2-5 Cover, Column Switch, Loader/Landscaper
| 12***14 | Bracket, Switch Cover Mount | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
| 14***7Z | Washer | 1 |
C3-8-1 Motor, Wiper
| 14***1Z | Washer, 2 Ba | 2 |
| 71***00 | Arm, Wiper | 1 |
| 71***00 | Arm | 1 |
C3-11-2 Warning Lights, Cluster And Gauges, Front Console
| 70***00 | Gauge, Fuel | 1 |
| 70***00 | Gauge, Water Temp | 1 |
| 70***00 | Cluster, Warning Lights | 1 |
C3-1-1 Gauges, Instrument Cluster
| 70***00 | Gauge, Fuel | 1 |
| 70***00 | Gauge, Water Temp | 1 |
| 70***00 | Gauge, Warning Lightcluster | 1 |
D Controls-Machine, Engine & Steering
D1-4-10 Control, Shovel Reset
| 13***2Z | Nut, Thin M20 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 26***24 | Bar | 1 |
D1-2-40 Cover, Case Controls, Excavator
| 12***55 | Gaiter, Double | 1 |
| 12***56 | Gaiter, Single Lever | 1 |
| 12***16 | Seal, Case, Excavator Controls | 1 |
D1-1-10 Controls, Loader, Auxiliary, Optional
| 11***16 | Joint, Universal | 1 |
| 12***11 | Knob, Black | 1 |
| 12***02 | Gaiter, Control | 1 |
D1-1-1 Controls, Loader, Loader Lift, Shovel
| 11***16 | Joint, Universal | 1 |
| 12***72 | Mat, Soundproofing, Loader Valve | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
D1-3-30 Controls, Auxiliary, Case System
| 12***57 | Knob, Control | 1 |
| 12***49 | Lever, Control; Replaced By 12***53, See San 11158 | 1 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 1 |
D1-24-1 Control, Gear Change
| 12***50 | Gaiter | 1 |
| 12***88 | Lever, Gear | 1 |
| 12***65 | Knob, Assembly, Gearlever, Black & Silver; Superseded By 12***34 See San13467 | 1 |
D1-7-1 Control Knob, Black, Loader Valve, Single Switch
| 13***02 | Screw, Grub, M5 X 8mm | 1 |
| 33***36 | Knob, Loader Lever | 1 |
| 70***00 | Push Button Black, With Microswitch | 1 |
D1-2-50 Cover, Jcb Controls, Excavator
| 12***71 | Seal, Excavator Controls | 1 |
| 12***90 | Plate, Access, Excavator Valve | 1 |
| 12***47 | Plate, Clamping | 2 |
D1-6-1 Controls, Lever, In Cab Boom Lock, 14'0 Centremount
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
| 12***62 | Casting, Boom Lock, 14'0 (Yellow) | 1 |
D1-2-30 Controls, Stabiliser
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 4 |
| 12***95 | Rod, Stabiliser Control | 2 |
| 12***77 | Lever, Stabiliser, Right Hand; Superceded By 33***81 + 33***82 | 1 |
D1-4-3 Control, Shovel Reset
| 12***39 | Link, Anti-Spill | 1 |
| 12***45 | Spacer | 1 |
| 13***0Z | Bolt, M8x40 | 1 |
D1-20-2 Controls, Brake Pedal
| 12***01 | Plate, Lock | 1 |
| 12***05 | Pin, Pivot, Brake Pedal | 1 |
| 12***48 | Pedal, Left Hand Brake, 214e | 1 |
D1-2-3 Controls, Excavator, Jcb + Pattern
| 11***16 | Joint, Universal | 2 |
| 12***59 | Ring, Tolerance | 2 |
| 12***76 | Grommet, Blind,Hole Dia 50mm, Panel Thickness 3mm | 1 |
D1-4-1 Control, Shovel Reset
| 12***85 | Cam, Plate | 1 |
| 12***39 | Link, Anti-Spill | 1 |
| 12***45 | Spacer | 1 |
D1-2-31 Controls, Stabiliser
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 4 |
| 12***95 | Rod, Stabiliser Control | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
D1-3-20 Controls, Auxiliary Valve, Backhoe, Optional
| 12***84 | Seal, Auxiliary Pedal | 1 |
| 12***53 | Plate, Auxiliary Pedal | 1 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 1 |
D1-21-3 Control, Parking Brake
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***92 | Bracket, Brake Lever Cover | 1 |
| 12***93 | Cover, Brake Lever | 1 |
D1-2-11 Controls, Excavator, Case System
| 12***57 | Knob, Control | 3 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 12 |
| 12***99 | Rod, Control, 149mm | 2 |
D2-1-1 Controls, Throttle & Stop, Ar & Ak Builds Tier 1 Emissions
| 12***03 | Pedal, Assembly, Throttle Control | 1 |
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
D2-2-1 Controls, Throttle & Stop, Re & Rg Builds Tier 2 Emissions
| 12***03 | Pedal, Assembly, Throttle Control | 1 |
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 6 |
D2-2-2 Controls, Throttle & Stop, Re & Rg Builds Tier 2 Emissions
| 12***03 | Pedal, Assembly, Throttle Control | 1 |
| 13***5Z | Bolt | 5 |
| 13***1Z | Nut, M5-8 | 6 |
D3-1-2 Steering Column
| 12***52 | Plate, Retainer | 1 |
| 12***85 | Shaft, Fixed Steer Column | 1 |
| 12***04 | Bracket, Master Cylinder, Mounting | 1 |
D3-1-5 Steering Column, Loader/Landscaper
| 12***52 | Plate, Retainer | 1 |
| 12***04 | Bracket, Master Cylinder, Mounting | 1 |
| 12***47 | Column, Steering Outer, Loader/Landscaper | 1 |
E Hydraulics & Air Including, Steering
E1-6-2 Circuit, Hitch Auxiliaries
| 45***60 | Coupling, Qrc 3/8"Bsp Female | 4 |
| 47***08 | Cap, Qrc Dust, Green | 4 |
| 61***00 | Hose | 2 |
E1-26-20 Dipper Ram Pipework
| 12***74 | Clamp, Pipe Support | 1 |
| 22***19 | Clip, Jubilee | 1 |
| 22***20 | Clip, Jubilee, 156-178mm | 1 |
E1-18-11 Cooler, Combination, Radiator/Hydraulic, & Transmission, 2ws
| 12***06 | Assembly 4row, Radiator/Oil Cooler | 1 |
| 12***07 | Assembly 5 Row, Radiator/Oil Cooler | 1 |
| 12***06 | Assembly 5 Row, Radiator/ Oil Cooler | 1 |
E1-26-1 Circuit, H.B.P Valve, Dipper Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
E1-10-13 Circuit, Bucket Ram, Extradig Dipper, 1400
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
| 12***36 | Clamp | 1 |
E1-5-10 Circuit, Steering, 2ws 4wd
| 12***56 | Spacer, Steel | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-4-1 Circuit, Cooler, Transmission, 2ws
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 4 |
| 14***14 | Washer, Seal | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
E1-6-3 Circuit, Hitch, Tilt,Pitch,Lift Rams
| 13***9Z | Setscrew, M8x35 | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 61***00 | Hose | 4 |
E1-6-10 Circuit, Hitch-3 Point, Valve Block To Bulkhead
| 13***2Z | Nut | 1 |
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 14***4Z | Washer, Star | 4 |
E1-18-12 Cooler, Combination, Re & Rg Engine Build, Rad, Hyd & Trans Cooler, 2ws
| 12***06 | Assembly 5 Row, Radiator/ Oil Cooler | 1 |
| 13***3Z | Nut, Lock, M10 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 8 |
E1-1-1 Circuit, Neutral, Basic Build, Twin Outlet Pump
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 14***08 | Seal, Washer | 1 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-21-1 Circuit, Attachment, Hammer
| 12***86 | Ring, Support | 1 |
| 12***87 | Mounting, Hook Clamp | 1 |
| 12***88 | Hook, 4" Spring | 1 |
E1-34-1 Circuit, Loader Lift, Suspension, Gear Pump
| 12***49 | Bracket, Accumulator Mounting | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 13***9Z | Bolt, M10x90mm | 1 |
E1-6-1 Circuit, Slew/Swing
| 16***02 | Adapter | 2 |
| 24***03 | O Ring | 1 |
| 61***00 | Hose, 1/4"Bsp X 690mm, A=Strt - B=Strt | 2 |
E1-1-30 Circuit, Neutral, Auxiliary Lowflow
| 62***38 | Hose, 3/4"Bsp 780mm | 1 |
| 63***00 | Hose | 1 |
| 81***16 | Adapter | 1 |
E1-27-20 Boom Ram Pipework
| 65***63 | Pipe, Boom Ram; Replaced By 83***16, See San 13611 | 1 |
E1-10-4 Circuit, Bucket Ram, Mono Dipper, 1400
| 12***36 | Clamp | 1 |
| 12***56 | Spacer, Steel | 2 |
| 13***4Z | Bolt | 1 |
E1-27-1 Circuit, H.B.P Valve, Boom Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
E1-4-11 Circuit, Cooler, Transmission, 2ws
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 4 |
| 14***14 | Washer, Seal | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E1-11-3 Circuit, Auxiliary, Extention Ram, Extradig Dipper 1400, Gear Pump
| 12***36 | Clamp | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***4Z | Nut | 2 |
E1-21-2 Circuit, Attachment, Hammer
| 12***86 | Ring, Support | 1 |
| 12***87 | Mounting, Hook Clamp | 1 |
| 12***88 | Hook, 4" Spring | 1 |
E1-26-2 Circuit, H.B.P Valve, Dipper Ram
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
E1-27-2 Circuit, H.B.P Valve, Boom Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
E1-8-1 Circuit, Boom Ram, 1400
| 13***4Z | Nut | 1 |
| 13***5Z | Nut | 1 |
| 61***09 | Hose, 1/2"Bsp X 850mm | 1 |
E1-5-1 Circuit, Steering, 2ws 2wd
| 12***56 | Spacer, Steel | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E1-1-10 Circuit, Neutral, Basic Build, Single Outlet Pump
| 13***0Z | Bolt, M10 X 40 | 2 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 14***08 | Seal, Washer | 1 |
E1-3-1 Circuit, Auxiliary, Loader
| 12***23 | Pipe, Loader Arms +, Auxiliary | 1 |
| 12***36 | Pipe, Left Hand Auxiliary, Loader Arms | 1 |
| 12***37 | Pipe, Right Hand Auxiliary, Loader Arms | 1 |
E1-2-1 Circuit, Loader Arm
| 12***12 | Spacer, Steel, 10mm Long | 2 |
| 12***59 | Pipe, Loader X Over | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-30-1 Circuit, Breaker, Changeover Valve
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 16***04 | Adapter, Male/Male | 6 |
| 25***00 | Valve, Change Over; Replaced By Mss Use 92***20 + 16***06 X2,, 81***16 X1. See San 12991 Pi A01/005 | 2 |
E1-11-30 Circuit, Auxiliary, Jaw Bucket, Extradig Dipper
| 12***20 | Pipe, Bucket Ram, Left Hand | 1 |
| 12***21 | Pipe, Bucket Ram, Right Hand | 1 |
| 12***66 | Pipe, Inner Dipper, Right Hand | 1 |
E1-11-4 Circuit, Auxiliary, Extention Ram, Extradig Dipper & Jaw 1400, Gear Pump
| 12***36 | Clamp | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***4Z | Nut | 2 |
E1-18-10 Cooler, Combination, Radiator/Hydraulic, & Transmission, 2ws
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***06 | Adapter, & Clip Assembly | 2 |
| 12***90 | Radiator, & Cooler Assembly, 4row, 4 Row Rad | 1 |
E1-9-1 Circuit, Dipper Ram, 1400
| 12***36 | Clamp | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***4Z | Nut | 2 |
E1-7-10 Circuit, Stabiliser, Centremount
| 13***8Z | Screw, M8x30 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 14***7Z | Washer, Spring | 4 |
E1-1-15 Circuit, Neutral, Utility, Loader/Landscaper
| 13***0Z | Bolt, M10 X 40 | 5 |
| 13***8Z | Bolt, M10x80 | 1 |
| 13***05 | Nut | 1 |
E1-12-1 Circuit, Jaw Bucket, Extradig Dipper 1400
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 2 |
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
E2-1-1 Pump, Main Hydraulic, 29/23ccr, Twin Outlet Pump
| 13***8Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
E2-2-1 Pump, Transmission &, Ss740 Syncro Shuttle, Pump & Main Hyd Pump Drive
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Bolt, M8 X 55 | 4 |
| 20***35 | Pump, Assembly Transmission, Ss700 | 1 |
E2-1-10 Pump, Main Hydraulic, 29/23ccr, Single Outlet
| 13***8Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
E2-1-2 Pump, Main Hydraulic, 29/23ccr, Twin Outlet Pump
| 13***8Z | Bolt | 4 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***9Z | Washer | 2 |
E3-6-20 Valve, Relief, Dipper Rod Side, Boom Rod Side
| 25***59 | Valve, Relief, 3600psi | 1 |
| 25***62 | Valve, Relief, 5000psi | 1 |
| 25***01 | Kit-Seal; Replaced By 25/62***06, See San 10352 | 1 |
E3-2-25 Valve, Section, Lift, 2 & 3 Spool, Mechanical Detent, Loader Valve
| 25***74 | Spacer | 1 |
| 25***33 | Seal | 1 |
| 25***34 | Seal | 1 |
E3-2-1 Valve, Loader, 2 Spool, With Float
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 4 |
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 1 |
E3-11-5 Valve,Section, Hitch Pitch,Tilt,Aux, Utility
| 25***55 | Valve, Section | 2 |
| 25***57 | Valve, Section | 1 |
| 25***01 | Screw | 2 |
E3-3-21 Valve Assembly, Excavator Auxiliary
| 25***02 | Valve, Relief, 138bar | 1 |
| 25***03 | Valve, Relief, 207 Bar | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
E3-7-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 32***41 | Element, Hydraulic Filter, 5 Micron, 254mm Long | 1 |
| 32***46 | Element, Hydraulic Filter, 12 Micron,229mm Long | 1 |
E3-6-10 Valve, Excavator, Centremount
| 25***40 | Kit-Repair, Spool Boot | 6 |
| 25***08 | Seal | 12 |
| 25***02 | Retainer, Wiper | 6 |
E3-9-12 Valve, Priority
| 13***6Z | Bolt, M8 X 70 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E3-2-20 Valve, Section, Shovel, 2 Spool, Loader Valve
| 25***33 | Seal | 2 |
| 25***34 | Seal | 2 |
| 25***17 | Valve, Section | 1 |
E3-10-1 Valve, Steering, 2ws, 200 Load Sensing
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***03 | O Ring | 1 |
E3-11-4 Valve,Section, Hitch Lift, Utility
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 1 |
| 25***56 | Valve Section | 1 |
E3-8-2 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, Fuel Filter, Canister Type | 1 |
E3-9-11 Valve, Priority
| 13***6Z | Bolt, M8 X 70 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E3-2-30 Valve, Loader, Main Relief
| 25***59 | Valve, Assembly, Main Relief | 1 |
| 25***01 | Valve, Relief | 1 |
| 25***02 | Kit-Repair, Relief Valve | 1 |
E3-8-3 Lubricants & Filters, Tier 2 Engines, Re & Rg Engine Builds
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 32***01 | Element, Air, Safety | 1 |
| 32***02 | Element, Air, Main | 1 |
E3-2-10 Valve, Loader, 3 Spool, With Float, Reset & Detent
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 6 |
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 1 |
E3-2-2 Valve, Loader, 2 Spool, With Float Never Used In Prod A04/245m
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 4 |
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 1 |
E3-3-3 Valve, Auxiliary, Backhoe, Monoblock
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
E3-37-1 Valve, Flow Regulator, Hammer Circuit
| 13***8Z | Bolt, M8x80mm Long | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 3 |
| 14***7Z | Washer, Spring | 3 |
E3-6-40 Plugs, Excavator Valve, Centremount
| 24***03 | O Ring | 1 |
| 25***16 | O Ring | 1 |
| 25***23 | Plug, Assembly | 1 |
E3-11-1 Valve,Hitch, Control,Utility
| 13***10 | Screw, Cap | 1 |
| 13***12 | Capscrew | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-3-2 Valve, Auxiliary, Backhoe, Monoblock
| 16***06 | Adapter, 39.5mm Lg. M/M | 3 |
| 16***07 | Adapter | 2 |
| 24***07 | O Ring | 5 |
E3-6-11 Valve, Excavator, Centremount
| 25***08 | Seal | 12 |
| 25***71 | Spool, Ex Digging | 6 |
| 25***22 | Valve, 6 Spool Excavator, Centremount 14' | 1 |
E3-3-22 Valve Assembly, Excavator, Auxiliary
| 25***24 | Poppet, Check Valve; Was Supplier Ref 53698, Change Requested By T, Ony Senior 28/08/03 To Dar | 1 |
| 25***25 | Spring | 1 |
| 25***26 | Plug | 1 |
E3-2-35 Valve, Loader, Auxiliary Relief, 2 & 3 Spool
| 25***32 | Kit-Repair | 1 |
| 25***03 | Valve, Relief | 1 |
| 25***05 | Valve, Relief, Auxiliary | 1 |
E3-2-50 Valve, Section, Auxiliary, 3 Spool, Loader Valve
| 25***33 | Seal | 2 |
| 25***34 | Seal | 2 |
| 25***15 | Valve, Section | 1 |
E3-6-30 Valve, Relief, Dipper Head Side, Boom Head Side, Bucket & Slew
| 25***59 | Valve, Relief, 3600psi | 4 |
| 25***60 | Valve, Relief, 3800psi | 2 |
| 25***01 | Plug | 1 |
E3-6-12 6alve, Excavator, Centremount, Never Used In Production A04/245m
| 25***08 | Seal | 12 |
| 25***42 | Kit-Check Valve | 1 |
| 25***46 | Kit-Anti-Cavitation | 6 |
E3-10-10 Valve, Steering, 2ws, 250 Load Sensing
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***03 | O Ring | 1 |
E3-5-10 Valve Adapters, Excavator, 1400
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***07 | Adapter | 4 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E3-2-11 Valve, Loader, 3 Spool, Never Used In Production A04/245m
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 6 |
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 1 |
E3-2-40 Valve, Section, Shovel, 3 Spool, Electrical Detent
| 25***33 | Seal | 1 |
| 25***34 | Seal | 2 |
| 25***13 | Valve, Section | 1 |
E4-6-70 Ram, Dipper, 100mm Cyl X 60mm Rod
| 12***15 | Ram, Dipper, Sunbelt Green | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
E4-13-18 Seal Kit, Dipper Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-15-1 Ram, Quickhitch
| 33***54 | Cylinder, (7/16"Unf Ports) | 1 |
| 53***00 | Ram, Complete, (1/4 Bsp Ports) | 1 |
| 53***01 | Cylinder, (1/4 Bsp Ports) | 1 |
E4-11-10 Ram, Slew/Swing, Centremount
| 14***15 | Washer, Seal; Replaces Khj0891 | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***02 | Adapter | 1 |
E4-11-11 Ram, Slew/Swing, Centremount
| 12***71 | Ram, Slew, Sunbelt Green | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-7-5 Ram, Bucket, Mono Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***56 | Ram, Assembly Bucket, 90 X 60 | 1 |
E4-13-12 Seal Kit, Lift Ram
| 23***55 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***06 | Seal, 50mm Rod | 1 |
E4-6-20 Ram, Dipper, Standard Lift, 100mm Cyl X 60mm Rod, 1898 Open Centres
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-10-1 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***02 | Ram, Stabiliser, Sunbelt Green | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-13-11 Seal Kit, Clam Shove, L Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-6-61 Ram, Dipper, 100mm Cyl X 60mm Rod, 1878 Open Centres
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-7-13 Ram, Bucket, Extradig Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***38 | Ram, Assembly, Bucket | 1 |
E4-5-20 Ram, Boom, Standard Lift, 110mm Cyl X 60mm Rod
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 56***89 | Ram, Boom (Yellow), 110mm Cyl X 60mm Rod; Replaced By 56***25 | 1 |
| 56***25 | Ram, Assembly, Boom, 2341oc 1361cc 980st | 1 |
E4-8-1 Ram, Extension, Extradig Dipper
| 12***98 | Ram, Extension, Extradig Dipper | 1 |
| 55***58 | Ram, Extension, Extradig Dipper | 1 |
| 55***58 | Cylinder, Extension Ram, 1244 Hole Ctr To End | 1 |
E4-13-11 Seal Kit, Shovel Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-4-1 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E4-7-4 Ram, Bucket, Mono Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***39 | Ram, Assembly, Bucket | 1 |
E4-13-14 Seal Kit, Dipper Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***14 | O Ring | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-12-2 Ram, Pitch & Tilt, 3 Point Hitch
| 90***00 | Ram, Hydraulic, Pitch | 1 |
| 90***00 | Ram, Hydraulic,Tilt | 1 |
| 90***56 | Rod, Piston | 1 |
E4-13-13 Seal Kit, Bucket Ram
| 23***55 | O Ring | 1 |
| 23***10 | O Ring | 1 |
| 24***06 | Seal, 50mm Rod | 1 |
E4-7-14 Ram, Bucket, Extradig Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***54 | Ram, Assembly Bucket, 90 X 60 | 1 |
E4-12-1 Ram, Lift, 3 Point Hitch
| 12***11 | Bush | 2 |
| 90***00 | Ram, 3 Point Lift, Rear Hitch | 1 |
| 90***58 | Rod, Piston | 1 |
E4-6-60 Ram, Dipper, 100mm Cyl X 60mm Rod, Use With Deep Profile Buckets Only
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-3-2 Ram, Steering, 4wd
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 2 |
E4-13-14 Seal Kit, Boom Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***14 | O Ring | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-1-1 Ram, Lift, Standard
| 12***15 | Bush | 1 |
| 12***80 | Ram, Lift, Sunbelt Green | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-13-18 Seal Kit, Stabiliser, Ram, Centremount
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-7-12 Ram, Bucket, Extradig Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***60 | Ram, Assembly, Bucket | 1 |
E4-4-2 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 3 |
E4-3-1 Ram, Steering, 2wd
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
E4-13-21 Seal Kit, Bucket Ram
| 23***55 | O Ring | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-2-1 Ram, Shovel
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 12***34 | Ram, Shovel, Sunbelt Green | 2 |
E4-7-3 Ram, Bucket, Mono Dipper
| 12***40 | Ram, Assembly,Bucket, Mono Dipper | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
F Axles, Wheels & Transmission
F1-1-30 Differential, 2ws, 4wd Steering Axle, 35kph 448/42400, 448/55000
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-6-10 Knuckle, 2ws, 4wd Steering Axle, 15.785 : 1 Ratio 448/57470 & 448/57480
| 13***09 | Screw | 16 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
| 45***04 | Joint, Knuckle Swivel, 3cx, Lockstop | 1 |
F1-6-30 Differential, 2ws, 4wd Steering Axle, 15.785 : 1 Ratio 448/57470 & 448/57480
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F1-6-1 Axle Assembly, 2ws, 4wd Steering, 15.785 : 1 Ratio 448/57470 & 448/57480
| 12***18 | Stop, Lock, 45mm Long | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***82 | Circlip | 2 |
F1-10-1 Axle Assembly, 2ws, 2wd Steering
| 12***01 | Pin, King | 2 |
| 12***02 | Pin, Cotter | 2 |
| 12***03 | Axle, Stub | 2 |
F1-1-10 Knuckle, 2ws, 4wd Steering Axle, 35kph 448/42400, 448/55000
| 13***09 | Screw | 16 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
| 44***02 | Joint, Knuckle Swivel | 1 |
F1-30-10 Power Trackrod, 2ws, 4wd
| 12***89 | Gaiter | 2 |
| 12***55 | Gaiter | 2 |
| 12***53 | Link, Trackrod, M24/M22 | 2 |
F1-3-1 Axle Pivot Pin, & Greasing, 2ws, 2wd/4wd
| 12***23 | Adhesive, Washer | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***3Z | Nut, M12 | 1 |
F1-1-20 Hub & Components 2ws, 4wd Steering Axle, 35kph 448/42400, 448/55000
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-1-1 Axle Assembly, 2ws, 4wd Steering, 35kph. 448/42400, 448/55000
| 12***18 | Stop, Lock, 45mm Long | 2 |
| 12***38 | Stop, Lock, 35mm Long | 2 |
| 12***19 | Stop, Axle Lock, 15mm | 2 |
F1-6-20 Hub & Components 2ws, 4wd Steering Axle, 15.785 : 1 Ratio 448/57470 & 448/57480
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-2-1 Axle Assembly 2ws, Rear Drive 15.78 : 1, 450/44030 450/44040 450/44660 450/44670
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-1-10 Differential 2ws, Assembly, 15.78 : 1, 450/44020 450/44050 450/44650 450/44680
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-1-1 Axle Assembly 2ws, Rear Drive 15.78 : 1, 450/44020 450/44050 450/44650 450/44680
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-3-30 Brakes, Axle, 450/44100
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-2-10 Differential 2ws, Assembly, 15.78 : 1, 450/44030 450/44040 450/44660 450/44670
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-2-30 Brakes, Axle, 450/44030 450/44040 450/44660 450/44670
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-3-20 Crown Wheel & Pinion, 2ws, 18.16 : 1, 30kph 450/44100
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-2-40 Differential 2ws, Components, 450/44030 450/44040 450/44660 450/44670
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-1-20 Crown Wheel & Pinion, 2ws, 15.78 : 1, 450/44020 450/44050 450/44650 450/44680
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Casing, Assembly, Differential | 1 |
| 45***00 | Differential, Assembly | 1 |
F2-1-30 Brakes, Axle, 450/44020 450/44050 450/44650 450/44680
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-2-20 Crown Wheel & Pinion, 2ws, 15.78 : 1, 35kph, 450/44030 450/44040 450/44660 450/44670
| 45***10 | Differential, Lsd Assembly, 3 Working Faces | 1 |
| 45***68 | Gear, Crown Wheel & Pinion, 13/38t; San 22277.Ss 99***55.P G 17/03/06.San 22429, Mss 82***44 & 45***58 | 1 |
| 45***37 | Gear, Crown Wheel & Pinion, 13t/38t See Gen209; San 22279.S/S Nla..P G 20/03/06.San 22429, Pi 450/316.See Ti' Gen 209 | 1 |
F3-5-1 Wheel & Tyre, Assembly, Rear, 2ws 16.9x14x24
| 10***01 | Nut | 10 |
| 12***45 | Wheel, & Tyre. Armstrong, 16.9x24x10pr | 2 |
| 12***36 | Wheel, & Tyre Assembly, Goodyear 16.9x24x12 | 2 |
F3-3-2 Wheel & Tyre, Assembly, Front, 2ws 2wd 11lx16
| 12***82 | Wheel, & Tyre. Armstrong, 11lx16x12pr | 2 |
| 12***54 | Wheel, And Tyre, Firestone, Industrial | 2 |
| 15***01 | Valve | 1 |
F3-5-2 Wheel & Tyre, Assembly, Rear, 2ws 19.5lx24
| 10***01 | Nut | 10 |
| 12***46 | Wheel, & Tyre. Armstrong, 19.5lx24x10pr | 2 |
| 12***47 | Wheel, & Tyre. Armstrong, 19.5lx24x12pr | 2 |
F3-5-6 Wheel & Tyre, Assembly, Rear, 2ws 21lx24
| 10***01 | Nut | 10 |
| 12***68 | Wheel, & Tyre Assembly, Ind, 21lx24x12 Goodyear | 2 |
| 15***01 | Valve | 1 |
F3-3-1 Wheel & Tyre, Assembly, Front, 2ws 2wd 11.0x16
| 12***43 | Wheel, & Tyre. Armstrong, 11.0x16x12pr | 2 |
| 12***07 | Wheel, & Tyre Assembly Ribbed, 11x16x12pr Firstone | 2 |
| 12***00 | Wheel, & Tyre Assembly, 11x16x12pr Ribbed | 2 |
F3-2-2 Propshaft, Transmission, Rear, Drive Axle, Manual Centremount
| 11***25 | Strap | 2 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut | 4 |
F3-1-1 Propshaft, Transmission, Front Drive Axle, Manual
| 11***25 | Strap | 4 |
| 81***75 | Nipple, Grease | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
F3-3-3 Wheel & Tyre, Assembly, Front, 2ws 2wd 11lx16 Firestone
| 12***68 | Wheel, And Tyre, Firestone, Industrial | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Wheel, Rim, 8x16 (6 Stud) | 1 |
F3-4-1 Wheel & Tyre, Assembly, Front, 2ws 4wd 14x17.5
| 10***01 | Nut | 10 |
| 12***06 | Wheel, & Tyre Assembly, Armstrong 14x17.5x10 | 2 |
| 12***88 | Wheel, & Tyre Assembly Goodyear, 14x17.5x10 Ply Ind | 2 |
F5-15-30 Transmission 2ws 4wd, Reverser Unit, 460/91950
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 2 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-15-60 Transmission 2ws 4wd, Ss740 Syncro Shuttle, Pump & Main Hyd Pump Drive 460/91950
| 13***1Z | Bolt, M8 X 45 | 4 |
| 20***52 | Pump, Assembly, Transmission | 1 |
| 22***68 | Circlip, Internal | 1 |
F5-15-1 Transmission Assy, Ss740 Syncro Shuttle, 2ws 4wd 4 Speed 460/91950
| 44***01 | Gear, Input, 26 Teeth | 1 |
| 44***01 | Dowel; 4 Dowels 44***01. Extra Dowels Added Between Items 1 And 1a, Dowel, Dowel; 4 Dowels On 44***06. Extra Dowels Added Between Items 1 And 1a, Dowel; 4 Dowels On 44***01. Extra Dowels Added Between Items 1 And 1a | 2 |
| 45***19 | Clutch, Assembly 4wd | 1 |
F5-4-60 Transmission 2ws 4wd, Ss740 Syncro Shuttle, Pump & Main Hyd Pump Drive 441/00110
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Bolt, M8 X 55 | 4 |
| 20***35 | Pump, Assembly Transmission, Ss700 | 1 |
F5-1-60 Transmission 2ws 2wd, Ss740 Syncro Shuttle, Pump & Main Hyd Pump Drive 441/00140
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Bolt, M8 X 55 | 4 |
| 20***35 | Pump, Assembly Transmission, Ss700 | 1 |
F5-15-50 Transmission 2ws 4wd, Gear Change, 460/91950
| 22***80 | Circlip | 1 |
| 33***66 | Gaiter, Gear Lever | 1 |
| 44***20 | Retainer, Spring | 1 |
F5-4-1 Transmission Assy, Ss740 Syncro Shuttle, 2ws 4wd 4 Speed 441/00110
| 44***10 | Gearbox, Assembly Ss700 4wd, 1.761:1 35kph Usa | 1 |
| 44***01 | Gear, Input, 26 Teeth | 1 |
| 44***01 | Dowel; 4 Dowels 44***01. Extra Dowels Added Between Items 1 And 1a, Dowel, Dowel; 4 Dowels On 44***06. Extra Dowels Added Between Items 1 And 1a, Dowel; 4 Dowels On 44***01. Extra Dowels Added Between Items 1 And 1a | 2 |
F5-10-1 Fasteners, Flywheel Housing, Transmission To Gearbox
| 02***70 | Dowel | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***2Z | Bolt, M12x50mm Long, Tuf-Lok | 1 |
F5-14-50 Transmission 2ws 4wd, Gear Change, 441/00320
| 22***80 | Circlip | 1 |
| 33***66 | Gaiter, Gear Lever | 1 |
| 44***20 | Retainer, Spring | 1 |
F5-15-20 Transmission 2ws 4wd, Internal Components, 460/91950
| 33***31 | Cover, Layshaft | 1 |
| 44***10 | Sleeve, Hub Shaft | 1 |
| 44***00 | Synchroniser, Assembly | 1 |
F5-14-1 Transmission Assy, Ss740 Syncro Shuttle, 2ws 4wd 4 Speed 441/00320
| 44***20 | Gearbox, Assembly Ss700, 4wd 1:1.446 | 1 |
| 44***01 | Dowel; 4 Dowels 44***01. Extra Dowels Added Between Items 1 And 1a, Dowel, Dowel; 4 Dowels On 44***06. Extra Dowels Added Between Items 1 And 1a, Dowel; 4 Dowels On 44***01. Extra Dowels Added Between Items 1 And 1a | 2 |
| 45***19 | Clutch, Assembly 4wd | 1 |
F5-4-30 Transmission 2ws 4wd, Reverser Unit, 441/00110
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 2 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-15-40 Transmission 2ws 4wd, Clutch Unit, Drop Box 460/91950
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F5-4-10 Transmission 2ws 4wd, Ss740 Syncro Shuttle, External Components 441/00110
| 13***9Z | Screw, M10x35mm | 12 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 4 |
F5-14-30 Transmission 2ws 4wd, Reverser Unit, 441/00320
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 2 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-1-20 Transmission 2ws 2wd, Internal Components, 441/00140
| 33***31 | Cover, Layshaft | 1 |
| 44***10 | Sleeve, Hub Shaft | 1 |
| 44***13 | Spacer | 1 |
F5-4-20 Transmission 2ws 4wd, Internal Components, 441/00110
| 33***31 | Cover, Layshaft | 1 |
| 44***10 | Sleeve, Hub Shaft | 1 |
| 44***00 | Synchroniser, Assembly | 1 |
F5-4-40 Transmission 2ws 4wd, Clutch Unit, Drop Box 441/00110
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F5-1-30 Transmission 2ws 2wd, Reverser Unit, 441/00140
| 33***16 | Plate, Counter, Clutch | 10 |
| 33***17 | Plate, Pressure, Clutch, 6.0 mm | 2 |
| 33***19 | Plate, Shim, Clutch, 1.2mm | 0 |
F5-11-1 Dipstick & Filler, Manual Transmission
| 12***42 | Tube, Filler | 1 |
| 12***99 | Dipstick | 1 |
| 12***04 | Bracket, Gearbox Filler | 1 |
F5-14-60 Transmission 2ws 4wd, Ss740 Syncro Shuttle, Pump & Main Hyd Pump Drive 441/00320
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***3Z | Bolt, M8 X 55 | 4 |
| 20***35 | Pump, Assembly Transmission, Ss700 | 1 |
F5-8-1 Transmission, Mounting, Jcb Syncro Shuttle
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 4 |
| 13***8Z | Bolt, M12 X 80mm | 2 |
F5-1-50 Transmission 2ws 2wd, Gear Change, 441/00140
| 22***80 | Circlip | 1 |
| 33***66 | Gaiter, Gear Lever | 1 |
| 44***20 | Retainer, Spring | 1 |
F5-15-10 Transmission 2ws 4wd, Ss740 Syncro Shuttle, External Components 460/91950
| 13***9Z | Screw, M10x35mm | 12 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 4 |
F5-7-1 Torque Converter, W300 3.01 Ratio, Drive Plate
| 04***05 | Washer, Plain | 4 |
| 04***02 | Bolt, M8 X 20 | 6 |
| 04***03 | Bolt | 4 |
F5-14-10 Transmission 2ws 4wd, Ss740 Syncro Shuttle, External Components 441/00320
| 13***9Z | Screw, M10x35mm | 12 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***1Z | Capscrew | 2 |
F5-4-50 Transmission 2ws 4wd, Gear Change, 441/00110
| 22***80 | Circlip | 1 |
| 33***66 | Gaiter, Gear Lever | 1 |
| 44***20 | Retainer, Spring | 1 |
F5-14-40 Transmission 2ws 4wd, Clutch Unit, Drop Box 441/00320
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F5-1-1 Transmission Assy, Ss700 Syncro Shuttle, & External Components, 2wd 2ws 441/00140
| 13***9Z | Screw, M10x35mm | 12 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Capscrew, M5 X 30mm | 4 |
F5-14-20 Transmission 2ws 4wd, Internal Components, 441/00320
| 33***31 | Cover, Layshaft | 1 |
| 44***10 | Sleeve, Hub Shaft | 1 |
| 44***00 | Synchroniser, Assembly | 1 |
F5-11-2 Dipstick & Filler, Manual Transmission, Tier 2
| 14***11 | Seal, Bonded | 1 |
| 15***00 | Nut, Sealastic | 1 |
| 33***40 | Dipstick, Gearbox,Manual, Tier 2 | 1 |
G Brakes
G1-2-1 Brakes, Rear Axle
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
G1-1-11 Brake, System
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***16 | Pipe, Servo Link | 1 |
G1-1-10 Brake, System
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***16 | Pipe, Servo Link | 1 |
G1-3-1 Brake, Parking
| 15***01 | Kit-Brake Pad; Replaced By 15/92***03 | 1 |
| 15***03 | Kit, Spring | 1 |
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
P Engines 1004-4/1004-4t Ar, Ak Builds, Tier 1
P1-6-3 Timing Case, Soundproofing
| 02***07 | Screw | 2 |
| 02***03 | Shield | 1 |
| 02***04 | Damper | 1 |
P1-5-15 Fans, Pulleys, & Fan Belt, 2ws, 1.16 : 1 Fan Speed, 20"Fan, Standard
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***06 | Belt, Fan - Pair, L=1300mm | 1 |
P1-5-13 Fans, Pulleys, & Fan Belt 2ws, 1.06 : 1 Fan Speed, 20"Fan, Standard
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
| 02***17 | Block, Thrust | 1 |
P1-3-1 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-6-1 Timing Case, Camshaft & Gears, Ar Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-1-2 Engine, Complete, Ak Build, 92bhp
| 01***86 | Engine, Complete 1004-4t, Turbo, 92bhp/72amp | 1 |
| 01***87 | Engine, Complete 1004-4t, Turbo, 92bhp/85amp | 1 |
P1-3-2 Block Assembly, Ak Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-3 Engine, Long, Ar Build
| 02***41 | Motor, Long | 1 |
P1-5-5 Fans, Pulleys, & Fan Belt, High Speed Fan, Ak Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***06 | Belt, Fan - Pair, L=1300mm | 1 |
P1-2-2 Engine, Short, Ak Build
| 02***60 | Engine, Short, Turbo | 1 |
P1-7-1 Flywheel, & Starter Ring Gear, Ar & Ak Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***25 | Washer | 6 |
| 02***50 | Flywheel, Assembly | 1 |
P1-2-1 Engine, Short, Ar Build
| 02***82 | Engine, Short | 1 |
P1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-6-2 Timing Case, Camshaft & Gears, Ak Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-5-2 Fans, Pulleys, & Fan Belt, Aircon, Ar Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***73 | Belt, Drive - Pair, L=1350mm; Lh Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 02/10***06., Belt, Drive - Pair, L=1350mm | 1 |
P1-5-4 Fans, Pulleys, & Fan Belt, Aircon, Low Speed Fan, Ak Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt, Ar Build
| 02***79 | Screw | 3 |
| 02***73 | Belt, Drive - Pair, L=1350mm; Lh Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 02/10***06., Belt, Drive - Pair, L=1350mm | 1 |
| 02***17 | Block, Thrust | 1 |
P1-2-4 Engine, Long, Ak Build 92 Bhp
| 02***37 | Engine Short | 1 |
P1-5-6 Fans, Pulleys, & Fan Belt, Aircon, High Speed Fan, Ak Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***06 | Belt, Fan - Pair, L=1300mm | 1 |
P1-8-1 Engine Mountings, 2ws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***01 | Bracket, Engine Mounting, Left Hand | 1 |
P1-5-3 Fans, Pulleys, & Fan Belt, Low Speed Fan, Ak Build
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
| 02***17 | Block, Thrust | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-5-20 Fans, Pulleys, & Fan Belt, 2ws, 1.16 : 1 Fan Speed, 22"Fan, Aircon
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***57 | Spacer, Fan, 25.4mm | 1 |
P1-1-1 Engine, Complete, Ar Build
| 01***85 | Engine, Complete 1004-4, Nat/Aspirated, 75bhp | 1 |
P1-5-14 Fans, Pulleys, & Fan Belt 2ws, 1.06 : 1 Fan Speed, 20"Fan, Aircon
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Ak Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-1-1 Cylinder Head, Ar Build
| 02***21 | Bolt, Cylinder Head | 4 |
| 02***48 | Plug | 1 |
| 02***96 | Plug, Core, D=32mm | 1 |
P2-4-1 Lifting Plates, Engine, Ar & Ak Builds
| 02***31 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-3-1 Rocker Cover, & Engine Breather, Ar & Ak Builds
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
| 02***94 | O Ring | 1 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Ar Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-1-2 Cylinder Head, Ak Build, 92bhp
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P3-1-2 Manifold, Induction, Ak Build
| 02***89 | Hose, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***54 | Elbow, Air Induction | 1 |
P3-3-4 Filter Monitor
| 12***39 | Bracket, Mounting, Filter Monitor | 1 |
| 71***00 | Kit-Filter Monitor | 1 |
| 82***61 | Nut, M4 | 2 |
P3-3-6 Filter, Air, Turbocharged, Ak Build
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***1Z | Bolt | 2 |
| 13***8Z | Bolt, M10 X 30 | 2 |
P3-4-4 Silencer & Extension, Turbocharged, 92/100bhp, Ak Build
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
P3-3-1 Filter, Air, Naturally Aspirated, Ar Build
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***1Z | Bolt | 2 |
| 13***8Z | Bolt, M10 X 30 | 1 |
P3-2-1 Manifold, Exhaust, Ar Build
| 02***36 | Gasket, Ind/Exhst Manifold | 1 |
| 02***37 | Manifold, Exhaust | 1 |
| 02***02 | Stud | 3 |
P3-3-2 Filter, Air, Turbocharged, Ak Build
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***1Z | Bolt | 2 |
| 13***8Z | Bolt, M10 X 30 | 1 |
P3-4-2 Silencer & Extension, Turbocharged 2ws, 92bhp, Ak Build
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***8Z | Bolt, M10 X 30 | 2 |
P3-1-1 Manifold, Induction, Ar Build
| 02***36 | Gasket | 2 |
| 02***35 | Gasket, Induction Manifold, Inner | 1 |
| 02***36 | Gasket, Ind/Exhst Manifold | 1 |
P3-4-1 Silencer & Extension, Naturally Aspirated, Ar Build
| 13***8Z | Bolt, M10 X 30 | 5 |
| 13***9Z | Screw, M10x35mm | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 7 |
P3-3-3 Filter, Pre-Cleaner, Optional
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 1 |
P3-2-2 Manifold, Exhaust, Ak Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P4-3-1 Radiator, Fittings & Mountings, 2ws
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***62 | Washer, Spreader | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
P4-3-3 Radiator, Fittings & Mountings, 2ws Turbo Builds
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***62 | Washer, Spreader | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
P4-1-1 Pump, Water, Ar & Ak Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
| 02***65 | Pump, Water | 1 |
P4-4-1 Radiator & Hoses, 4 Row Oil Cooler, 2ws Naturally Aspirated
| 12***24 | Tank, Expansion, Assembly | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Ar & Ak Builds
| 02***95 | Plug, Taper | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
| 02***46 | O Ring | 1 |
P4-5-1 Seals, Anti-Recirculation, 2ws
| 33***37 | Seal, Anti-Recirculation, Baffle Plate | 1 |
| 33***38 | Seal, Anti-Recirculation, Tower Cover | 1 |
P4-4-2 Radiator & Hoses, 5 Row Oil Cooler, 2ws 92bhp-Turbo
| 12***24 | Tank, Expansion, Assembly | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
P5-3-1 Piston Cooling Jets, Ak Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P5-5-1 Cooler, Oil, Filter & Pipework, Ar Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P5-1-1 Sump, Oil, & Fittings, Ar & Ak Builds
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
P5-2-1 Pump, Oil, & Relief Valve, Ar Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Ak Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-5-2 Cooler, Oil, Filter & Pipework, Ak Build 92bhp
| 02***73 | Element, Oil Filter, Canister Type - Long | 2 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P6-6-1 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
P6-6-2 Filter, Fuel Sediment
| 32***66 | Filter, Fuel Sediment | 1 |
| 32***70 | Head, Filter | 1 |
| 32***71 | Element, Fuel Sediment Filter | 1 |
P6-8-1 Pump, Fuel Lift
| 02***23 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-5-2 Fuel Heater, & Fuel Feed Pipe, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-3-2 Fuel Pipes, Injection Pump, Ak Build, 92bhp
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 4 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Ar Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-6-3 Filter, Fuel Sediment
| 32***71 | Element, Fuel Sediment Filter | 1 |
| 32***73 | Plug, Drain Assembly | 1 |
| 32***81 | Screw, Bleed | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-3-1 Fuel Pipes, Injection Pump, Ar Build
| 02***64 | Olive | 4 |
| 02***05 | Pipe, Fuel, F/Filter To Inj/Pump | 1 |
| 02***45 | Pipe, Fuel, Inj/Pump To F/Filter | 1 |
P6-1-2 Pump, Fuel Injection, Ak Build 92bhp
| 02***63 | Bracket, Support | 1 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-1-1 Pump, Fuel Injection, Ar Build
| 02***63 | Bracket, Support | 1 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 2 |
P6-2-2 Injectors, Fuel, & Injection Pipes, Ak Build, 92bhp
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P7-7-1 Block Heater, Freeze Plug Type, 120v Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
| 71***18 | Harness, Engineblock Heater, 120voltv | 1 |
| 71***11 | Element, Heater, 120volt | 1 |
P7-4-1 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 1 |
| 15***11 | Bearing | 2 |
P7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Ak Build
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P7-7-3 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 12***46 | Bracket, Mounting | 1 |
| 13***3Z | Screw, M6x16 | 2 |
P7-8-1 Cold Start, Ether
| 12***09 | Block, Or Fitting | 1 |
| 12***10 | Clamp | 1 |
| 12***11 | Canister, Fluid | 1 |
P7-1-1 Turbocharger, Ak Build, 92bhp
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***70 | Turbocharger | 1 |
| 02***71 | Housing, Compressor | 1 |
P7-3-1 Pump, Vacuum, & Installation
| 13***07 | Capscrew | 2 |
| 14***01 | Washer, Aluminium | 1 |
| 14***11 | Seal, Bonded | 1 |
P7-5-1 Compressor, Installation, Air Conditioning
| 12***37 | Valve, Pressure | 1 |
| 12***41 | Shim | 0 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
P7-1-2 Turbocharger, Ak Build, 92bhp
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***70 | Turbocharger | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P8-2-1 Gasket Set, Bottom, Ar & Ak Builds
| 02***51 | Kit-Gasket, Bottom | 1 |
P8-1-1 Gasket Set, Top, Ar Build
| 02***30 | Kit-Gasket, Top | 1 |
P8-1-2 Gasket Set, Top, Ak Build
| 02***51 | Kit-Gasket, Top | 1 |
R Engines 1104c-44/1104c-44t Re, Rg Builds, Tier 2
R1-2-1 Engine Short, Re Build
| 02***02 | Engine, Short | 1 |
R1-7-1 Flywheel, & Starter Ring Gear, Re Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***25 | Washer | 10 |
| 02***81 | Flywheel, Assembly | 1 |
R1-1-4 Engine, Complete, 92bhp, Rg Build
| 01***52 | Engine, Complete, 1104c-44t, Turbo, 92bhp - 75amp | 1 |
| 01***53 | Engine, Complete, 1104c-44t, Turbo, 92bhp - 85amp | 1 |
R1-2-2 Engine Short, Rg Build
| 02***00 | Engine, Short | 1 |
R1-5-4 Fans, Pulleys, & Fan Belt, 2ws Build, 1.06 : 1 Fan Speed, Aircon
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
| 02***17 | Block, Thrust | 1 |
R1-6-2 Timing Case, Camshaft & Gears, Rg Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
R1-5-6 Fans, Pulleys, & Fan Belt, 2ws Build, 1.21 : 1 Fan Speed, Aircon
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***77 | Pulley, Crankshaft, Twin Groove | 1 |
R1-6-1 Timing Case, Camshaft & Gears, Re Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
R1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Rg Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 0 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 0 |
R1-8-1 Engine Mountings, 2ws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***01 | Bracket, Engine Mounting, Left Hand | 1 |
R1-1-2 Engine, Complete, 92bhp, Rg Build
| 01***14 | Engine, Complete, 1104c-44t, Turbo, 92bhp - 72amp | 1 |
| 01***15 | Engine, Complete, 1104c-44t, Turbo, 92bhp - 85amp | 1 |
R1-3-1 Block Assembly, Re Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***34 | Plug | 1 |
R1-5-1 Fans, Pulleys, & Fan Belt, 2ws Build, Standard
| 02***79 | Screw | 3 |
| 02***66 | Belt, Fan, Pair, L=1312mm; Ld Builds. When Replacing 45amp Alternators With Latest 55amp Type Use Fan Belt 99***00., Belt, Fan, Pair, L=1312mm | 1 |
| 02***17 | Block, Thrust | 1 |
R1-5-3 Fans, Pulleys, & Fan Belt, 2ws Build, 1.06 : 1 Fan Speed, Standard
| 02***79 | Screw | 3 |
| 02***06 | Belt, Fan - Pair, L=1300mm | 1 |
| 02***17 | Block, Thrust | 1 |
R1-1-1 Engine, Complete, Re Build, 82.5bhp
| 01***18 | Engine, Complete 1104-4, N/Asp, 82.5bhp-75amp | 1 |
R1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Re Build
| 02***38 | Key | 1 |
| 02***11 | Washer, Thrust, Top-Oversize 0.19mm | 2 |
| 02***13 | Washer, Thrust, Btm-Oversize 0.19mm | 2 |
R1-7-2 Flywheel, & Starter Ring Gear, Rg Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***25 | Washer | 10 |
| 02***81 | Flywheel, Assembly | 1 |
R1-3-2 Block Assembly, Rg Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***34 | Plug | 1 |
R2-4-2 Breather, Engine Oil, Rg Build
| 02***59 | Bracket | 1 |
| 02***78 | Spring | 1 |
| 02***64 | Screw | 2 |
R2-7-1 Heater Plugs, & Pick-Up Sensor, Re Build
| 71***73 | Sensor, Cold Start | 1 |
| 71***66 | Connector, Bar Thermostart | 1 |
| 71***72 | Thermostart | 4 |
R2-6-1 Lifting Plates, Engine, Re Build
| 02***63 | Bracket, Engine Lifting | 2 |
| 82***01 | Screw | 4 |
R2-3-1 Rocker Cover, Re Build
| 02***64 | Screw | 10 |
| 02***66 | Gasket, Rocker Cover | 1 |
| 02***67 | Spring | 1 |
R2-7-2 Heater Plugs, & Pick-Up Sensor, Rg Build
| 71***73 | Sensor, Cold Start | 1 |
| 71***66 | Connector, Bar Thermostart | 1 |
| 71***72 | Thermostart | 4 |
R2-1-1 Cylinder Head, Re Build
| 02***95 | Plug, Taper | 1 |
| 02***07 | Plug, Core, D=50mm | 2 |
| 02***34 | Plug | 4 |
R2-3-2 Rocker Cover, Rg Build
| 02***64 | Screw | 10 |
| 02***66 | Gasket, Rocker Cover | 1 |
| 02***67 | Spring | 1 |
R2-2-2 Rocker Assembly, Push Rods & Tappets, Rg Builds
| 02***43 | Rod, Push | 8 |
| 02***03 | Nut, Lock | 2 |
| 02***96 | Tappet | 8 |
R2-4-1 Breather, Engine Oil, Re Build
| 02***64 | Screw | 2 |
| 02***73 | O Ring | 1 |
| 02***74 | Seal | 1 |
R2-6-2 Lifting Plates, Engine, Rg Build
| 02***63 | Bracket, Engine Lifting | 1 |
| 02***42 | Bracket | 1 |
| 82***01 | Screw | 4 |
R2-2-1 Rocker Assembly, Push Rods & Tappets, Re Builds
| 02***43 | Rod, Push | 8 |
| 02***03 | Nut, Lock | 2 |
| 02***96 | Tappet | 8 |
R2-1-2 Cylinder Head, Rg Build
| 02***95 | Plug, Taper | 2 |
| 02***07 | Plug, Core, D=50mm | 2 |
| 02***34 | Plug | 4 |
R2-5-2 Covers, Cylinder Head
| 02***37 | Cover | 1 |
| 02***49 | Cover, Heatshield | 1 |
| 02***11 | Bolt | 1 |
R2-5-1 Cover, Cylinder Head
| 02***77 | Cover | 1 |
| 02***10 | Bolt | 3 |
R3-4-1 Silencer & Extension, Naturally Aspirated
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7Z | Bolt, M10x25 | 7 |
R3-4-3 Exhaust Extension, Two Spring Fixing, Service Kit
| 12***77 | G.A, Exhaust Extension Ki, Additional Spring | 1 |
| 22***14 | Clip, Jubilee; Replaces Kej0337 | 2 |
| 33***02 | Mounting, Exhaust Spring | 2 |
R3-1-2 Manifold, Induction, Rg Build
| 02***36 | Gasket | 3 |
| 02***39 | Plate | 3 |
| 02***83 | Clip, Hose | 2 |
R3-4-2 Silencer & Extension, Turbocharged, 92/100bhp
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 13***7Z | Bolt, M10x25 | 7 |
R3-2-2 Manifold, Exhaust, Rg Build
| 02***17 | Gasket, Exhaust Manifold | 1 |
| 02***54 | Manifold, Exhaust | 1 |
| 02***52 | Screw | 8 |
R3-3-4 Filter, Air, Turbocharged, 2ws Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt, Hex. | 1 |
R3-3-3 Filter, Air, Naturally Aspirated, 2ws Build
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt | 2 |
| 13***2Z | Bolt, Hex. | 1 |
R3-1-1 Manifold, Induction, Re Build
| 02***36 | Gasket | 2 |
| 02***39 | Plate | 2 |
| 02***11 | Connector | 1 |
R3-3-6 Filter, Pre-Cleaner
| 01***24 | Pipe, Air Intake; Replaces 01/18***13 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
R3-2-1 Manifold, Exhaust, Re Build
| 02***17 | Gasket, Exhaust Manifold | 1 |
| 02***50 | Manifold, Exhaust | 1 |
| 02***52 | Screw | 8 |
R4-1-2 Pump, Water, Rg Build
| 02***80 | Pump, Water Assembly | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
| 02***78 | Gasket, W/Pump To T/Case | 1 |
R4-3-1 Radiator, Fittings & Mountings, 2ws
| 12***62 | Washer, Spreader | 6 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 10 |
| 13***0Z | Bolt, M10 X 40 | 4 |
R4-1-1 Pump, Water, Re Build
| 02***80 | Pump, Water Assembly | 1 |
| 02***81 | Kit-Repair, Water Pump | 1 |
| 02***78 | Gasket, W/Pump To T/Case | 1 |
R4-2-1 Thermostat, Housing, Inlet & Outlet, Re Builds
| 02***95 | Plug, Taper | 1 |
| 02***74 | Connector, Water Outlet, Assembly | 1 |
| 02***75 | Thermostat | 1 |
R4-4-1 Radiator & Hoses, 5 Row Oil Cooler, 2ws Builds
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 12***90 | Bracket, Mounting, Expansion Tank | 1 |
| 12***93 | Tank, Expansion, Assembly | 1 |
R4-2-2 Thermostat, Housing, Inlet & Outlet, Rg Builds
| 02***95 | Plug, Taper | 1 |
| 02***74 | Connector, Water Outlet, Assembly | 1 |
| 02***75 | Thermostat | 1 |
R5-5-1 Cooler, Oil, Re Build
| 02***02 | Gasket, Oil Cooler To Block | 1 |
| 02***03 | Gasket | 2 |
| 02***05 | Cooler, Oil | 1 |
R5-1-2 Sump, Oil, & Fittings, Rg Build
| 02***82 | Plug, Oil Drain | 1 |
| 02***98 | O Ring | 1 |
| 02***03 | Olive | 1 |
R5-4-2 Filter, Oil, & Oil Feed Adapter, Rg Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***16 | Connector | 1 |
| 02***31 | Gasket, Oil Filter Head, To Cyl/Block | 1 |
R5-4-1 Filter, Oil, & Oil Feed Adapter, Re Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***16 | Connector | 1 |
| 02***31 | Gasket, Oil Filter Head, To Cyl/Block | 1 |
R5-1-1 Sump, Oil, & Fittings, Re Build
| 02***82 | Plug, Oil Drain | 1 |
| 02***98 | O Ring | 1 |
| 02***03 | Olive | 1 |
R5-5-2 Cooler, Oil, Rg Build
| 02***02 | Gasket, Oil Cooler To Block | 1 |
| 02***03 | Gasket | 2 |
| 02***04 | Element, Oil Cooler | 1 |
R5-6-1 Oil Filler, Installation, 2ws Builds
| 02***07 | Cap, Oil Filler | 1 |
| 02***94 | O Ring | 1 |
| 02***88 | O Ring | 1 |
R5-2-1 Pump, Oil
| 02***85 | Pump, Oil | 1 |
| 02***18 | Screw | 5 |
R5-2-2 Pump, Oil
| 02***85 | Pump, Oil | 1 |
| 02***18 | Screw | 5 |
R6-6-1 Filter, Fuel Sediment
| 32***71 | Element, Fuel Sediment Filter | 1 |
| 32***73 | Plug, Drain Assembly | 1 |
| 32***81 | Screw, Bleed | 1 |
R6-7-2 Pump, Fuel Lift, & Filter Assembly
| 02***32 | Washer | 2 |
| 02***80 | Screw, M6x40mm | 2 |
| 17***00 | Pump, Electric Fuel Lift, Filter Assembly | 1 |
R6-12-1 Fuel Injection Pump, Service Parts, Rg Build
| 17***22 | Washer, Cup | 1 |
| 17***01 | Connector, Fuel Pressure | 4 |
| 17***03 | Screw | 4 |
R6-3-1 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-11-3 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-2-4 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***30 | Hose, Fuel Leak-Off | 3 |
| 02***35 | Cap, Blanking | 1 |
R6-7-1 Pump, Fuel Lift, & Filter Assembly
| 02***32 | Washer | 2 |
| 02***80 | Screw, M6x40mm | 2 |
| 17***00 | Pump, Electric Fuel Lift, Filter Assembly | 1 |
R6-1-2 Pump, Fuel Injection, 92bhp, Rg Build
| 02***12 | O Ring | 1 |
| 02***27 | Gear, Fuel Injection | 1 |
| 02***95 | Washer | 3 |
R6-3-2 Fuel Pipes, Injection Pump, Rg Build, 92bhp
| 02***86 | Tie, Cable | 1 |
| 02***21 | Pipe, Fuel Feed, Filter To Inj/Pump | 1 |
| 02***23 | Connector, Fuel | 1 |
R6-2-1 Injectors, Fuel, & Injection Pipes, Re Build
| 02***26 | Clamp | 1 |
| 02***44 | Clip | 2 |
| 02***45 | Clip | 1 |
R6-11-1 Pump, Fuel Injection, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-11-2 Fuel Injection Pump, Service Parts, Re Build
| 17***23 | Capscrew | 3 |
| 17***01 | Valve, Overflow | 1 |
| 17***03 | Nut, Cap | 1 |
R6-3-6 Fuel Pipes, Injection Pump, Re Build
| 02***23 | Connector, Fuel | 1 |
| 02***26 | Spacer | 1 |
| 02***38 | Bracket, Support | 1 |
R6-3-4 Fuel Pipes, Injection Pump, Rg Build, 92bhp
| 02***22 | Olive | 1 |
| 02***57 | Union | 1 |
| 02***64 | Olive | 1 |
R6-1-4 Pump, Fuel Injection, 92bhp, Rg Build
| 02***12 | O Ring | 1 |
| 02***27 | Gear, Fuel Injection | 1 |
| 02***95 | Washer | 3 |
R6-12-2 Fuel Injection Pump, Service Parts, Rg Build
| 17***22 | Washer, Cup | 1 |
| 17***01 | Connector, Fuel Pressure | 4 |
| 17***03 | Screw | 4 |
R6-1-1 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-1-6 Pump, Fuel Injection, Re Build
| 02***94 | Gear, Fuel Injection Pump | 1 |
| 02***95 | Washer | 3 |
| 02***96 | O Ring | 1 |
R6-4-1 Fuel Pipes, Fuel Tank To Filter
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
R6-2-2 Injectors, Fuel, & Injection Pipes, Rg Build, 92bhp
| 02***26 | Clamp | 1 |
| 02***30 | Hose, Fuel Leak-Off | 3 |
| 02***35 | Cap, Blanking | 1 |
R7-2-1 Turbocharger, Pipework & Mounting, Rg Build
| 02***07 | Bolt, Banjo | 2 |
| 02***09 | Gasket | 1 |
| 02***10 | Gasket | 1 |
R7-3-1 Pump, Vacuum, & Installation
| 15***01 | Pipe, Oil Feed | 1 |
| 15***02 | Nut, Union | 2 |
| 15***03 | Olive | 2 |
R7-5-1 Compressor, Installation, Air Conditioning
| 12***37 | Valve, Pressure | 1 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 13***8Z | Screw, M8x30 | 1 |
R7-7-3 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 12***46 | Bracket, Mounting | 1 |
| 13***3Z | Screw, M6x16 | 2 |
R7-4-1 Pump, Vacuum
| 15***00 | Pump, Vacuum | 1 |
R7-1-1 Turbocharger, Rg Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***60 | Turbocharger, Assembly | 1 |
| 02***61 | Nut | 4 |
R7-7-1 Block Heater, Freeze Plug Type, 120v, Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
| 71***18 | Harness, Engineblock Heater, 120voltv | 1 |
| 71***11 | Element, Heater, 120volt | 1 |
R7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
R8-2-1 Gasket Set, Bottom, Re Build
| 02***98 | O Ring | 1 |
| 02***87 | Gasket | 1 |
| 02***12 | O Ring | 1 |
R8-1-1 Gasket Set, Top, Re Build
| 02***72 | Kit-Top Gasket | 1 |
R8-1-2 Gasket Set, Top, Rg Build
| 02***36 | Gasket | 1 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***76 | O Ring | 1 |
R8-2-2 Gasket Set, Bottom, Rg Build
| 02***98 | O Ring | 1 |
| 02***87 | Gasket | 1 |
| 02***12 | O Ring | 1 |
214e-LL serial number reference
Locate the machine identification plate mounted on the loader tower. The serial numbers of the machine and its major units are stamped on this plate. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 960001 to 989999 | Global production range for JCB 214e, 214e LL, and 215E backhoe loaders. | |
| 1327000 to 1349999 | Global production range for JCB 214e, 214e LL, and 215E backhoe loaders. | |
| 1616000 to 1625999 | Global production range for JCB 214e, 214e LL, and 215E backhoe loaders. | |
| 907001 to 919999 | North America market production range for JCB 214e, 214e LL, and 215E backhoe loaders. |
Frequently asked questions
What engine does the JCB 214e-LL use?
The JCB 214e-LL uses a Perkins 1004 Series engine with 76 hp.
What is the operating weight of the JCB 214e-LL?
The operating weight ranges from 6.75 to 7.74 tons depending on the configuration.
What model replaced the JCB 214e-LL?
The JCB 216 succeeded the 214e-LL in the product lineup.
What 214e-LL owners discuss
What are the known powertrain and hydraulic behaviors for the JCB 214e-LL?
The machine utilizes a synchronized shuttle transmission with power shift between forward and reverse. Common powertrain behaviors include pressure loss when the transmission heats up, where cold pressure is adequate but drops after 10–15 minutes of operation. Some units exhibit intermittent engine shutdowns and random ignition switch power loss during operation. The hydraulic system requires a clean hydraulic oil strainer and a hydraulic tank filler cap with an integral filter to maintain efficiency.
What undercarriage or wear patterns are typical for this machine type?
The JCB 214e-LL is a wheeled backhoe loader and does not have a tracked undercarriage. Wear patterns focus on the front and rear axle housings, hubs, and tires. Stabilizer legs feature wear pads that require periodic adjustment. The machine has a heavy-duty one-piece mainframe with grease seals at vital backhoe joints and large diameter pins and bushings to withstand load stress.
What are the engine quirks per series for the JCB 214e-LL?
The JCB 214e-LL is powered by a Perkins 4-cylinder turbo diesel engine (specifically the 1004 Series). A known quirk involves the Engine Oil Solenoid (EOS) switch; a faulty EOS can cause fuel flooding, hard starting, and black smoke emissions. The engine compartment is fully enclosed and lockable using the ignition key.
What are common electrical or sensor issues?
A frequent electrical issue is the blowing of the 10A fuse (#5a) which feeds the forward/reverse solenoids, relays, and start circuit. This is often caused by chafed wires in the forward/reverse stalk wiring harness where the plug joins the wires. Other issues include low transmission oil warning lights triggering alarms and the starter failing to engage if the machine is in gear or if the park brake is engaged.
What should be checked when buying a used 214e-LL?
Verify the machine serial number range, as service procedures and component specifications vary between machines up to serial no. the OEM part reference and those from serial no. the OEM part reference onwards (USA). Check for internal leaks from the oil pressure sender near the rear of the transmission. Inspect the transmission fluid for signs of overheating or coolant contamination, which can swell clutch packs. Ensure the forward/reverse stalk wiring is intact and that the 10A fuse for the shift circuit is not repeatedly blowing.
What fluids and specifications are recommended for the JCB 214e-LL?
The transmission requires a 'Powertrain spec' oil, specifically a 10W TO-4 specification transmission oil, rather than standard hydraulic oil. Engine oil should be JCB 15W/40 Multigrade for temperatures between -10°C to 50°C (14°F to 122°F). Hydraulic systems use JCB branded hydraulic oil verified for high-quality base oils and additive technology. Brake fluid can be substituted with aircraft hydraulic fluid MIL-H-5606A if JCB-specific fluid is unavailable.
What safety-critical fixes require dealer verification?
The installation of hose burst protection valves and the adjustment of stabilizer leg wear pads are safety-critical. Have your dealer verify the correct torque specifications for the flexi drive plate and engine support system bolts, as all bolts on JCB machines are high tensile and must not be replaced by lesser tensile specifications. Verify the serial-specific servo excavator valve pressure testing procedures if the machine is near the serial no. the OEM part reference break.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 214e-LL part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.