JCBconstructionbackhoe loader 3cx,4cx,214,215,217
Jcb 214e
Maintenance schedule, common problems & OEM parts breakdown
The JCB 214e is a Series 4 backhoe loader manufactured from 1997 to 2004. It is powered by a Perkins 1000 Series four-cylinder, direct-injection diesel engine with 4.25 liters displacement. Operating weights range from 5,919 kg (13,046 lb) for the 2WD base unit to 6,669 kg (14,698 lb) for the 4WD cab version. The machine features a unitized one-piece mainframe, a synchro shuttle transmission with a torque converter, and JCB Max-Trac axles. Configurations include 2WD and 4WD variants, available with either an enclosed cab or a canopy.
The 214e succeeded the earlier 214 series and was later replaced by the 216 and 220 models. It matters in the used market for its durable Perkins engine and extended 500-hour oil change intervals, which reduce downtime compared to competitors. The machine remains popular for municipal and agricultural work due to its compact footprint, lockable fluid compartments, and heavy-duty one-piece mainframe design.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 214e specifications
Engine
| Model | Perkins 1004 Series |
| Displacement | 4.25 L (259 cu. in.) |
| Cylinders | 4 |
| Aspiration | Natural |
| Gross Power | 76 HP (56.7 kW) |
| Net Power | 72 HP (53.7 kW) |
| Max. Gross Torque | 214 lb-ft (291 Nm) |
| Max. Net Torque | 210 lb-ft (286 Nm) |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight (2WD Base Unit) | 13,046 lb (5,919 kg) |
| Operating Weight (4WD Base Unit) | 13,376 lb (6,069 kg) |
| Operating Weight (2WD Cab) | 14,368 lb (6,519 kg) |
| Operating Weight (4WD Cab) | 14,698 lb (6,669 kg) |
| Operating Weight (4WD Cab, varies by configuration/series) | 15,439 lb (7,003 kg) |
| Operating Weight (4WD, varies by configuration/series) | 16,446 lb (7,459 kg) |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 23 ft 276 in (7.01 m) |
| Transport Height (Standard Backhoe) | 11 ft 134 in (3.40 m) |
| Height to Top of Cab/Canopy | 9 ft 111 in (2.82 m) |
| Overall Width with Bucket | 7 ft 88 in (2.24 m) |
| Ground Clearance (Mainframe) | 1 ft 14 in (0.36 m) |
| Ground Clearance (Front Axle, 2WD) | 1 ft 14 in (0.36 m) |
| Ground Clearance (Front Axle, 4WD) | 0 ft 10 in (0.25 m) |
| Wheelbase (2WD) | 6 ft 83 in (2.11 m) |
| Wheelbase (4WD) | 7 ft 85 in (2.16 m) |
| Front Wheel Track (2WD) | 5 ft 71 in (1.80 m) |
| Front Wheel Track (4WD) | 6 ft 73 in (1.85 m) |
| Rear Wheel Track (2WD) | 5 ft 65 in (1.65 m) |
| Rear Wheel Track (4WD) | 5 ft 68 in (1.73 m) |
Performance
| Travel Speed (Gear 1) | 3.4 mph (5.5 kph) |
| Travel Speed (Gear 2) | 5.1 mph (8.2 kph) |
| Travel Speed (Gear 3) | 10.9 mph (17.5 kph) |
| Travel Speed (Gear 4) | 20.6 mph (33.2 kph) |
| Lift Capacity | 6,750 lb (3,062 kg) |
| Breakout Force | 11,730 lb (52,054 N) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
214e fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 11.1 L (2.5 US gal) | JCB 15W/40 Multigrade engine oil. Viscosity range: -10°C to 50°C (14°F to 122°F). For temperatures below -10°C, use JCB Super Universal Agricultural oil with a range of -15°C to 30°C (5°F to 86°F). |
| Cooling system | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Fuel tank | 83.2 L (18.3 US gal) | Diesel oil. See types of fuel specified in the operation and maintenance manual. |
| Transmission | Not documented for this exact serial range — verify with your dealer | JCB Super Universal Agricultural transmission oil. Viscosity range: -15°C to 30°C (5°F to 86°F). |
| Front axle | Not documented for this exact serial range — verify with your dealer | JCB Super Universal Agricultural gear oil. |
| Rear axle | Not documented for this exact serial range — verify with your dealer | JCB Super Universal Agricultural gear oil. |
| Hydraulic system | Not documented for this exact serial range — verify with your dealer | JCB hydraulic oil. Genuine JCB hydraulic oil is recommended for high anti-wear performance and thermal stability. |
| Grease | N/A | JCB grease. Axles and driveshafts are factory greased with high-performance grease; if standard grease is used during service, the interval must be reduced to every 50 hours. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 214e maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 214e beyond the schedule
Predictive Maintenance & Fluid Analysis
JCB 214e intervals rely on 500-hour oil changes rather than 250-hour schedules. Take baseline oil samples from the engine, hydraulic tank, and axles at the first 500-hour service. Compare subsequent samples against this baseline to detect bearing wear or contamination early. Monitor the hydraulic return filter magnet for metallic debris during every 250-hour service. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specs. Check the coolant expansion tank daily to prevent overheating in the pressurized cooling system.
Corrective & Common Repairs
The Perkins 1000 Series engine uses a gear-driven water pump and cast iron sump. Replace the dual-element cyclonic air filter when the restriction indicator shows clogging, especially in dusty environments. The synchro shuttle transmission requires oil changes at 1,000 hours. After any major transmission repair, run the new oil to operating temperature and change it again to remove contamination. Check the EOS (Engine Oil Solenoid) switch if experiencing hard starting or black smoke. Inspect the torque converter stall pressure if power loss occurs.
Overhaul & Rebuild Points
At 2,000 hours, inspect the loader arms, backhoe boom, and chassis for structural cracks or unauthorized welding. Measure swing ring play on the backhoe kingpost using dial indicators. Check service brake disc wear and immersed brake condition. Inspect the turbocharger shaft play and charge cooler boot integrity. Test injector spray patterns via diagnostic tool and replace as required. Verify the integrity of the unitized mainframe welds, which support the heavy rear frame and loader arms.
Seasonal & Environment Servicing
The 214e features a Thermostart cold start aid for low-temperature operation. In hot climates, the cooling system is pressurized to 0.5 bar with a 21-inch suction fan. Check the pressurized recovery tank filler neck for leaks. Grease all pivot points more frequently in dusty conditions. If standard grease is used in the axles and driveshafts instead of factory high-performance grease, reduce the greasing interval to every 50 hours. Ensure the IP67-rated electrical connectors remain sealed to prevent water and dust ingress.
214e common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 02/200165 | Pipe, Assembly, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/201705 | Pipe, Fuel, F/Filter To Inj/Pump | Fuel system service | Check fitment → |
| 02/201845 | Pipe, Fuel, Inj/Pump To F/Filter | Fuel system service | Check fitment → |
| 02/201696 | Pipe, Fuel, L/Pump To F/Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
214e fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel Rail Pressure Too Low | Clogged fuel filters, failing lift pump, or pressure regulator fault. | Check fuel filter condition and fuel line integrity; verify lift pump operation. |
| P0112 | Intake Air Temperature Sensor Low Voltage | Short circuit to ground in the IAT sensor wiring or connector corrosion. | Inspect wiring harness for damage; check connector pins for corrosion or bent terminals. |
| P0117 | Engine Coolant Temperature Sensor Low Voltage | Short circuit in the coolant temperature sensor circuit or faulty sensor. | Check sensor resistance and wiring continuity; verify coolant level. |
| P0521 | Engine Oil Pressure Sensor Range/Performance | Faulty oil pressure sensor or low engine oil level. | Verify actual oil pressure with a mechanical gauge; check oil level and sensor wiring. |
| P2047 | Reductant Injector Circuit Open (SCR System) | DEF/AdBlue injector circuit fault or clogged injector nozzle. | Inspect injector wiring harness and connectors; check DEF fluid quality and level. |
| U0100 | Lost Communication with Engine Control Module | CAN bus wiring fault, loose connector, or ECU power/ground issue. | Check battery voltage and ground straps; inspect CAN bus wiring for damage or corrosion. |
| 101 | Low Transmission Clutch Pressure | Transmission fluid low, pump wear, or solenoid valve fault. | Check transmission fluid level and condition; inspect transmission solenoid valves. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
214e attachments & work tools
Loader Buckets
Standard configuration includes a 1.25 cubic yard (0.96 m³) general-purpose bucket with a 92-inch (2.34 m) width. Breakout force is rated at 11,730 lb (5,319 kg) with a lift capacity of 6,750 lb (3,062 kg).
Backhoe Buckets
Standard equipment is a 24-inch (0.61 m) heavy-duty digging bucket. Optional configurations include a 48-inch (1.22 m) ditching bucket or a 15-foot (4.57 m) extending dipper stick for increased reach.
Backhoe Thumbs
Compatible with 36-inch (0.91 m) mechanical or hydraulic thumb attachments. Hydraulic options include basic pin-adjustment or fully hydraulic retraction systems requiring auxiliary flow.
Quick Attach Systems
Factory options include the Q-fit tool carrier system for loader buckets. Aftermarket solutions such as the Wain Roy XLS hydraulic swing coupler system are available for bucket rotation.
Hydraulic Breakers
Compatible with JCB hydraulic breakers such as the Model 360Q. Requires a factory-installed hydraulic breaker circuit and specific tooling available through JCB dealers.
Cab and Canopy Options
Operators may select an open canopy or an enclosed cab meeting SAE ROPS/FOPS standards. Cab options include heater, pressurizer, and air conditioning.
Transmission Configurations
Standard transmission is a 4-speed synchro shuttle. Optional configurations include a 6-speed Powershift transmission with autoshift capabilities for higher travel speeds.
Steering and Axle Options
Front axle options include flame cut bar with fixed tread or JCB Max-Trac torque proportioning. Rear axle configurations feature limited slip or standard automatic traction control.
All 214e assemblies by section
Every catalogued assembly group for the Jcb 214e. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-1-10 Shovel, G.P 1.1m3, 2350mm (7'8") Wide
| 12***55 | Toeplate | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***3Z | Nut | 4 |
A1-7-1 Shovel, Clam, 6 In 1, 7'4" Wide 1.0m3
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
| 12***23 | Bush | 2 |
| 12***49 | Bracket, Indicator | 1 |
A1-5-1 Shovel, Clam, 6 In 1, 2350mm (7'8") Wide, 1.0m3
| 12***23 | Bush | 2 |
| 12***62 | Toeplate, 2343mm Long | 1 |
| 12***44 | Toeplate, 6 In 1, 7'8" Wide | 1 |
A1-1-1 Shovel, G.P 1.0m3, 2253mm (7'4") Wide
| 12***23 | Toeplate | 1 |
| 12***65 | Shovel, Gp 1.0m3, 7'4" Wide | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A1-1-11 Shovel, G.P 1.1m3, 2350mm (7'8") Wide, Heavy Duty
| 12***04 | Toeplate | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
| 13***3Z | Nut | 4 |
A1-1-2 Shovel, G.P 1.0m3, 2253mm (7'4") Wide, Heavy Duty
| 12***56 | Toeplate | 1 |
| 12***74 | Shovel, Gp 1.0m3 7'4" Wide, Heavy Duty | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A2-2-1 Blade, Back Fill
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-1-3 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 8 |
A2-1-7 Bucket, Heavy Duty
| 10***04 | Boss, Pivot | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 82***70 | Washer | 2 |
A2-1-5 Bucket, Ribbed
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 6 |
A2-1-6 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 4 |
| 82***70 | Washer | 2 |
A2-3-1 Blade, Grading 5'
| 13***1Z | Nut | 6 |
| 14***11 | Washer | 6 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-1-4 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 2 |
| 13***01 | Nut | 7 |
A2-2-1 Tooth, Ripper
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-2-1 Bucket, Tapered Ditc, Hing
| 13***01 | Nut | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-3-2 Blade, Grading 6'
| 13***1Z | Nut | 8 |
| 14***11 | Washer | 8 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A3-24-2 Quickhitch, Attachment, Backhoe
| 12***18 | Hook | 1 |
| 12***19 | Plate, Retaining | 1 |
| 12***21 | Pin, Locking | 1 |
A3-6-6 Quickhitch, Manual
| 12***56 | Handle, Grip | 1 |
| 13***7Z | Bolt | 3 |
| 13***3Z | Bolt, M6x55 | 1 |
A3-23-3 Earth Drill, Gearbox
| 98***02 | Gearbox, Earth Drill | 1 |
| 98***03 | Housing, Output | 1 |
| 98***04 | Shaft, Output | 1 |
A3-7-1 Tooth Option, 2350mm, (7'8.5") Shovel
| 13***01 | Nut | 8 |
| 13***1Z | Nut | 16 |
| 14***11 | Washer | 8 |
A3-8-1 Fork Frames & Forks, Industrial
| 12***74 | Fork, 2t S.W.L. | 1 |
| 98***00 | Frame, Fork | 1 |
| 98***00 | Guard, Load | 1 |
A3-6-5 Quickhitch, Industrial, Hydraulic
| 13***3Z | Screw, 1/4 Unf X .625 | 2 |
| 13***8Z | Bolt | 2 |
| 13***3Z | Screw, M6x16 | 12 |
A3-24-5 Quickhitch, Attachment, Backhoe
| 12***57 | Latch | 1 |
| 12***61 | Bolt, Trunnion | 2 |
| 12***62 | Pin, Pivot | 1 |
A3-7-3 Toeplate Option, 225, 3mm (7'4") Shovel
| 13***01 | Nut | 24 |
| 14***11 | Washer | 8 |
| 53***05 | Tooth | 8 |
A3-7-3 Tooth Option, 2253mm, (7'4") Shovel
| 13***01 | Nut | 24 |
| 14***11 | Washer | 8 |
| 53***05 | Tooth | 8 |
A3-7-1 Toeplate Option, 235, 0mm (7'8.5") Shovel
| 13***01 | Nut | 8 |
| 13***1Z | Nut | 16 |
| 14***11 | Washer | 8 |
A3-1-6 Fork Lift, Gp Shovel Mounted
| 12***32 | Pin, Pivot | 2 |
| 12***27 | Fork | 2 |
| 12***96 | Block, Rubber Pad | 2 |
A3-1-5 Fork Lift, 6 In 1 Clam Shovel, Mounted 1.0m3
| 12***32 | Pin, Pivot | 2 |
| 12***93 | Bracket, Fork Rail Support | 2 |
| 12***94 | Bracket, Fork Rail Support | 1 |
B Bodywork, Cab, Loader End
B1-8-30 Mudguards, Rear, Black, Optional Aws
| 13***5Z | Bolt | 12 |
| 14***1Z | Washer | 12 |
| 14***6Z | Washer, Spring | 12 |
B1-1-1 Chassis Centremount, 2ws
| 12***75 | Frame, Rear, Centremount | 1 |
| 12***00 | Yoke, 2ws Axle | 1 |
| 12***14 | Chassis, Centremount, 2ws | 1 |
B1-10-14 Pads, Street, Stabiliser, Centremount
| 12***61 | Pad, Street | 2 |
| 12***62 | Roller | 1 |
| 12***63 | Sleeve | 1 |
B1-10-12 Pads, Street, Stabiliser, Centremount
| 10***47 | Pin, Pivot | 2 |
| 12***71 | Strip, Rubber | 19 |
| 12***72 | Clamp, Street Foot | 1 |
B1-6-10 Grille, Front, Aws
| 12***24 | Blank, Bumper Infill, (2ws 90kg) | 1 |
| 12***00 | Guard, Grille Housing, Aws | 1 |
| 12***55 | Grille, Assembly Front; Replaced By 12***80, See San09798 | 1 |
B1-9-20 Mudguards, Front, Yellow, Aws
| 12***52 | Bracket, Lower Left Hand | 1 |
| 12***53 | Bracket, Lower Right Hand | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
B1-6-2 Grille, Front, 2ws
| 12***00 | Guard, Grille Housing, 2ws | 1 |
| 12***55 | Grille, Assembly Front; Replaced By 12***80, See San09798 | 1 |
| 12***80 | Grille, Assembly, Front; Replaced By 12***58, See San 12660 | 1 |
B1-8-20 Mudguards, Rear, Yellow, Aws
| 13***5Z | Bolt | 12 |
| 14***1Z | Washer | 12 |
| 14***6Z | Washer, Spring | 12 |
B1-5-1 Bonnet
| 12***63 | Spacer | 2 |
| 12***66 | Bonnet, With Pre-Cleaner | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-11-10 Engine Sidepanel, Aws
| 12***64 | Shield, Heat | 1 |
| 12***65 | Handle; Replaced By 12***55, See San08835 | 2 |
| 12***30 | Handle, Locking, 180 Deg | 2 |
B1-10-10 Pads, Street, Stabiliser, Centremount
| 13***16 | Screw | 2 |
| 13***3Z | Nut | 2 |
| 13***01 | Nut | 9 |
B1-3-1 Tank, Diesel Fuel, 130 Litres
| 12***92 | Cap, Filler, Lockable, Supplied Without Key | 1 |
| 12***93 | Strainer, Fuel, Guaze; Replaced By 12***11, See San10198 | 1 |
| 12***41 | Cover, Battery Box | 1 |
B1-4-2 Stabiliser, Centremount
| 10***19 | Pin, Pivot | 2 |
| 10***47 | Pin, Pivot | 2 |
| 12***03 | Leg, Stabiliser, Centremount | 2 |
B1-9-1 Mudguards, Front, Yellow, 2ws
| 12***23 | Fender, Front Left Ahnd, Yellow, 343mm Wide | 1 |
| 12***24 | Fender, Front Right Hand, Yellow, 343mm Wide | 1 |
| 12***93 | Bracket, Upper, Left Hand | 1 |
B1-7-1 Step, Cab Access, Hydraulic Tank Side
| 12***11 | Step, Top | 1 |
| 12***12 | Step, Lower | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 8 |
B1-9-30 Mudguards, Front, Black, Optional, Aws
| 12***52 | Bracket, Lower Left Hand | 1 |
| 12***53 | Bracket, Lower Right Hand | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 8 |
B1-8-1 Mudguards, Rear, Yellow, 2ws
| 12***74 | Fender, Left Hand | 1 |
| 12***52 | Fender, Right Hand | 1 |
| 13***5Z | Bolt | 12 |
B1-9-10 Mudguards, Front, Black, Optional, 2ws
| 12***93 | Bracket, Upper, Left Hand | 1 |
| 12***94 | Bracket, Upper, Right Hand | 1 |
| 12***74 | Fender, Front Left Hand, Black, 343mm Wide | 1 |
B1-6-1 Grille, Front, 2ws
| 12***66 | Bumper, 2ws 90kg Cast | 1 |
| 12***67 | Bumper, 2ws 250kg Cast | 1 |
| 12***24 | Blank, Bumper Infill, (2ws 90kg) | 1 |
B1-11-1 Engine Sidepanel, 2ws
| 12***77 | Panel, Engine Side, Left Hand | 1 |
| 12***78 | Panel, Engine Side, Right Hand | 1 |
| 12***64 | Shield, Heat | 1 |
B1-13-10 Valve Mountings, Excavator & Loader
| 12***89 | Plate, Loader Valve Mount | 1 |
| 12***05 | Bracket, Loader Valve; Replaced By 12***51, See San 10396 | 1 |
| 12***26 | Bracket, Ex Valve Mount | 1 |
B1-2-1 Tank, Hydraulic
| 12***27 | Tube, Hydraulic Filler, Neck | 1 |
| 12***87 | Gauge, Sight; Replaced By 12***53 | 1 |
| 12***17 | Cover, Plate | 1 |
B1-5-2 Bonnet
| 12***63 | Spacer | 2 |
| 12***81 | Bonnet, With Pre-Cleaner | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B1-1-10 Chassis Centremount, Aws
| 12***75 | Frame, Rear, Centremount | 1 |
| 33***53 | Yoke, Aws Axle, 214se | 1 |
| 33***33 | Chassis, Centremount, 214se Aws | 1 |
B1-8-10 Mudguards, Rear, Black, Optional 2ws
| 12***33 | Fender, Left Hand, Black | 1 |
| 12***34 | Fender, Right Hand, Black | 1 |
| 13***5Z | Bolt | 12 |
B2-7-20 Seat, Suspension, 5000 Lb
| 12***98 | Pedestal, Seat; Replaced By 12***98, See San08817 | 1 |
| 12***75 | Seat, Suspension Cloth, 5000lb; Replaced By 12***68, See San08817 | 1 |
| 12***76 | Seat, Suspension Vnyl, 5000lb; Replaced By 12***69, See San08817 | 1 |
B2-18-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-15-1 Handbook Case
| 13***3Z | Screw, M6x16 | 4 |
| 15***01 | Holder, Handbook | 1 |
| 82***01 | Nut, Rivet,M6 Open Ended, For 3 To 5.5mm Plt | 4 |
B2-23-1 Cab Roof, Uk & World
| 12***47 | Spacer | 2 |
| 12***50 | Roof, Cab, Uk & World, Yellow | 1 |
| 12***40 | Roof, Cab, Black | 1 |
B2-8-10 Wash/Wipe, Rear Screen
| 12***70 | Bottle, Front & Rear, Sceen Wash | 1 |
| 12***31 | Bottle, Front & Rear, Screen Wash | 1 |
| 24***11 | Grommet, Groove Dia 25.4mm, Panel Thkness 2-3mm | 1 |
B2-2-1 Cab Glazing, Tinted, Direct Glazing
| 82***24 | Windscreen, Green Tinted, Laminated | 1 |
| 82***25 | Glass, Right Hand 1/4 Light, 1 Piece; Replaced By 82***70, See San 10301 | 1 |
| 82***26 | Glass, Left Hand 1/4 Light, 1 Piece; Replaced By 82***69, See San 10301 | 1 |
B2-24-1 Cover, Harness'S
| 12***93 | Cover; Replaced By 12***75 | 1 |
| 12***75 | Cover | 1 |
| 12***76 | Bracket, Pedal Cover | 1 |
B2-1-1 Cab Shell, Unglazed
| 12***91 | Washer, Nylon | 4 |
| 12***67 | Cover, Heater | 1 |
| 12***11 | Cover, Left Hand B.Post, Cab & Canopy | 1 |
B2-13-1 Cab Rear Valance, Centremount
| 12***03 | Cover, Rear Valance | 1 |
| 13***3Z | Bolt, M8 X 55 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
B2-7-1 Seat, Static
| 12***99 | Rail, Left & Right Hand, Slide | 1 |
| 12***57 | Seat, Assembly, Static Vinyl; Replaced By 12***84, See Pi A00/132 | 1 |
| 12***84 | Seat, Assembly, Static, Vinyl; Replaced By 12***72, See San 12833 | 1 |
B2-2-10 Canopy Glazing
| 12***52 | Strip, Cosmetic Glazing | 2 |
| 25***03 | Jet, Screen Washer | 1 |
| 64***25 | Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 3000mm, Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 2500mm, Tube, 5 Metres Long, Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1200mm (600mm Per Pump To Valve), Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1400mm (700mm Per Pump To Valve), Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 5000mm, Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 4000mm | 0 |
B2-25-1 Luggage Nets
| 26***01 | Net, Stowage | 1 |
| 82***33 | Screw | 4 |
B2-6-1 Soundproofing, Cab Base
| 12***57 | Plate, Auxiliary Pedal Blanking | 1 |
| 12***20 | Floormat | 1 |
| 12***72 | Mat, Soundproofing, Loader Valve | 1 |
B2-1-10 Cab Glazzing
| 12***93 | Liner, Roof | 1 |
| 25***03 | Jet, Screen Washer | 1 |
| 64***25 | Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 3000mm, Tube, 5 Metres Long; Front Screen. Cut Length To Suit Installation, Maximum Length Required 2500mm, Tube, 5 Metres Long, Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1200mm (600mm Per Pump To Valve), Tube, 5 Metres Long; Pump(S) To Non Return Valve(S). Cut Length To Suit Installation, Maximum Length Required 1400mm (700mm Per Pump To Valve), Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 5000mm, Tube, 5 Metres Long; Rear Screen. Cut Length To Suit Installation, Maximum Length Required 4000mm | 0 |
B2-8-1 Wash/Wipe, Windscreen
| 12***05 | Spacer | 1 |
| 12***17 | Bracket, Washer Bottle | 1 |
| 12***30 | Bottle, Front Screen Wash | 1 |
B2-3-1 Door
| 12***05 | Bolt, Closing | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***29 | Grommet | 1 |
B2-5-1 Window, Rear Opening
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 12***78 | Bracket, Right Hand, Rear Window; Replaced By 33***94 | 1 |
| 12***79 | Bracket, Left Hand, Rear Window; Replaced By 33***93 | 1 |
B2-11-1 Mirror, Interior
| 12***68 | Arm, Right Hand Mirror | 1 |
| 12***69 | Arm, Left Hand Mirror | 1 |
| 12***70 | Mirror, Exterior Head Assembly | 2 |
B2-10-1 Cab Mountings
| 12***02 | Plate, Compression | 4 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-7-10 Seat, Suspension
| 12***99 | Rail, Left & Right Hand, Slide | 1 |
| 12***58 | Seat, Suspension, Vinyl; Replaced By 12***85, See Pi A00132 | 1 |
| 12***59 | Seat, Suspension, Cloth; Replaced By 12***86, See Pi A00132 | 1 |
B2-1-30 Canopy
| 12***11 | Cover, Left Hand B.Post, Cab & Canopy | 1 |
| 12***12 | Cover, Right Hand B.Post, Cab & Canopy | 1 |
| 12***71 | Canopy, Frame | 1 |
B2-12-1 Cab - Tower Moulding
| 12***72 | Moulding, Right Hand Tower | 1 |
| 12***73 | Moulding, Left Hand Tower | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-23-2 Cab Roof, Usa
| 12***47 | Spacer | 2 |
| 12***39 | Roof, Cab,Usa, Yellow | 1 |
| 12***32 | Roof, Cab,Usa, Black | 1 |
B2-4-1 Window, Side, Opening
| 11***22 | Handle | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 2 |
B2-6-20 Soundproofing, Cab Roof
| 12***93 | Liner, Roof | 1 |
| 12***94 | Bracket, Support | 1 |
| 82***54 | Washer, Plain | 3 |
B3-3-1 Arms, Loader, Shovel Linkage
| 12***23 | Bush | 6 |
| 12***49 | Lever, Shovel, 440mm Long (Plain) | 3 |
| 12***95 | Lever, Crowd, 440mm Long, With Tapped Hole | 1 |
B3-4-1 Safety Strut, Loader Arms
| 12***70 | Strut, Safety, 650mm | 1 |
| 12***71 | Stop | 2 |
| 12***34 | Fastener, Antiluce | 2 |
B3-1-1 Arms, Loader
| 12***41 | Arm, Loader | 1 |
| 13***2Z | Bolt, M12 X 120 | 2 |
| 13***4Z | Bolt, M12 X 140 Lg. | 2 |
B4-6-1 Dipper (Stick), Extradig
| 10***01 | Strap | 1 |
| 12***01 | Clip | 1 |
| 12***15 | Pad, Wear Strip, Bottom, Green | 4 |
B4-11-1 Kingpost, Bulkhead
| 12***48 | Plate, Bulkhead, Kingpost | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
B4-12-2 Kinkpost Hose Clamps
| 12***68 | Clamp, 5/8" Top, Centremount | 2 |
| 12***69 | Plate, Clamp | 4 |
| 12***89 | Clamp, 5/8" Middle | 2 |
B4-8-1 Tipping Link, Standard
| 12***47 | Link, Tipping | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-2-1 Slew/Swing, Components
| 12***37 | Seal | 4 |
| 12***28 | Disc, Blanking | 1 |
| 12***40 | Cap, Bolt Cover | 2 |
B4-5-1 Dipper (Stick), Mono
| 10***01 | Strap | 1 |
| 12***00 | Lever, Tipping, Single Link Position | 1 |
| 12***00 | Lever, Tipping, Twin Link Position | 1 |
B4-10-1 Boom Lock, In Cab Controls, 14'0 Centremount
| 12***34 | Lever, Boomlock, Red Grip | 1 |
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
B4-8-20 Tipping Link, With Lifting Hook
| 12***50 | Link, Tipping | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B4-4-1 Boom, Centremount
| 12***21 | Pivot, Boom Eye End Casting | 1 |
| 12***22 | Pivot, Boom Nose Casting; Superseded To Nla, San21025 | 1 |
| 12***32 | Boom, 2390mm Long | 1 |
B4-3-1 Kingpost, 14'0 Backhoe, Centremount
| 12***26 | Spacer | 1 |
| 12***27 | Washer, Thrust; Replaced By 82***70 | 2 |
| 12***43 | Spacer | 1 |
B4-8-30 Tipping Link, With Lifting Hook
| 12***49 | Link, Tipping, Max S.W.L. '5ton' | 1 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 2 |
| 80***25 | Bearing, Liner, 45mm Pivot Bore | 2 |
B5-2-10 Decals, 214
| 33***18 | Label, Warning, Stab Leg Hazard | 1 |
| 33***44 | Label, Seat Belt Warning | 1 |
| 33***47 | Label, Warning, 'Use The Seat Belt' | 1 |
B5-1-11 Decals, Excavator, Ford Style
| 81***96 | Decal, Stabiliser | 1 |
| 81***38 | Decal, Left Hand, Ford Type Controls | 1 |
| 81***39 | Decal, Right Hand, Ford Type Controls | 1 |
B5-3-2 Tool Kit
| 27***00 | Bag, Tool | 1 |
| 40***12 | Grease, Cartridge 400g | 1 |
| 82***08 | Screwdriver | 1 |
B5-1-1 Decals, Loader & Excavator, Jcb X Pattern Controls
| 24***04 | Seal | 26 |
| 81***78 | Decal, Jaw | 1 |
| 81***80 | Decal, Extradig | 1 |
B5-1-2 Decals, Loader & Excavator, Jcb + Pattern Controls
| 24***04 | Seal | 26 |
| 81***78 | Decal, Jaw | 1 |
| 81***80 | Decal, Extradig | 1 |
B5-1-10 Decals, Excavator, Case Style
| 81***96 | Decal, Stabiliser | 1 |
| 81***97 | Decal, Left Hand Foot, Case Controls | 1 |
| 81***98 | Decal, Right Hand Foot, Case Control | 1 |
B5-1-3 Decals, Loader & Excavator, Iso + Pattern Controls
| 24***04 | Seal | 26 |
| 81***78 | Decal, Jaw | 1 |
| 81***80 | Decal, Extradig | 1 |
B5-4-2 Fire Extinguisher
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
| 82***68 | Rivet, Nut | 2 |
B5-5-1 Paint
| 42***01 | Thinners, 5 Litres | 0 |
| 42***01 | Paint, Undercoat Grey, 5 Lts | 0 |
| 42***02 | Paint, Undercoat Grey, 1 Lts | 0 |
C Electrics-Machine, Cab & Engine
C1-5-2 Light, Working, Cab Rear
| 12***05 | Bracket | 4 |
| 12***70 | Grommet, (1 Hole) | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
C1-1-10 Harness Cab & Canopy, 4ws Machine Electric, Shuttle Transmission
| 12***95 | Clip, Harness Support | 2 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 5 |
| 12***65 | Clip | 1 |
C1-20-2 Harness Connectors, Repair Ip67 Standard, (C45/N.Am.)
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-2-1 Battery 12v, Carrier
| 12***65 | Clip | 1 |
| 12***59 | Clip | 1 |
| 12***80 | Bolt, Battery, M6 X 290mm | 2 |
C1-8-1 Light, Highway, Dipper Hazard
| 10***01 | Spring, 24" Bungy | 1 |
| 70***00 | Wire, With Plug | 1 |
| 70***01 | Plug | 1 |
C1-12-1 Horn, Single Tone, Front
| 12***99 | Bracket, Front Horn | 1 |
| 13***7Z | Bolt, M10x25 | 1 |
| 13***9Z | Screw, M10x35mm | 1 |
C1-3-20 Light, Rear, Roof Mounted
| 13***1Z | Nut, M5-8 | 4 |
| 14***7Z | Washer | 4 |
| 70***00 | Light, Rear | 2 |
C1-20-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-26-1 Harness, Loader Lift, Suspension
| 70***52 | Cover, Actuator, Arm Suspension | 1 |
| 70***00 | Switch, 12v | 1 |
| 72***91 | Harness, Arm Suspension | 1 |
C1-10-1 Pump, Diesel, Refuelling, Optional
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-16-1 Electrics, Machine Switches, Gauges
| 10***01 | Gasket | 1 |
| 12***05 | Cap, Fuel Sender Unit, Yellow; Superseded By 12***35 See San 20239 | 1 |
| 12***35 | Cap, Fuel Level Sensor, Black | 1 |
C1-1-1 Harness Cab & Canopy, 2ws Machine Electric, Shuttle Transmission
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 5 |
| 12***65 | Clip | 1 |
| 12***47 | Clip, Cable | 4 |
C1-14-1 Mountings & Supports, Harness
C1-9-1 Alarm, Reverse, Installation, Optional
| 71***00 | Alarm, Reverse | 1 |
| 82***54 | Washer, Plain | 2 |
| 82***55 | Washer, Spring | 2 |
C1-22-1 Light, Indicator
| 12***69 | Gasket, Left Hand Indicator | 1 |
| 12***70 | Gasket, Right Hand Idicator | 1 |
| 14***07 | Washer | 4 |
C1-17-1 Inclinometer, Lev-O-Gage.
| 70***00 | Gauge, Inclinometer/Level | 1 |
C1-12-2 Horn, Installation, Rear
C1-4-4 Light, Head, 12.Volt, Right Hand Dip, White
| 70***01 | Lens, Indicator | 1 |
| 70***00 | Light, Head Assembly, Right Hand Dip | 2 |
| 70***01 | Lens, Assembly, Headlight | 1 |
C1-5-1 Light, Working, Cab Front
| 14***07 | Screw | 4 |
| 70***03 | Spring | 2 |
| 70***00 | Light, Front Working | 2 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-2 Alternator, 72amp
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***08 | Bracket, Drive End | 1 |
C2-3-1 Alternator, 65amp
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
C2-3-3 Alternator, 85amp, Optional
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***00 | Alternator, 85amp | 1 |
| 71***01 | Stator, & Drive End Bracket | 1 |
C2-4-1 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-4-2 Alternator Mountings, 85amp
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-4-0 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-1-1 Electrical Equipment, Ar Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-1-0 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Temperature | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-1-2 Electrical Equipment, Ak Build
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C3-18-1 Interior Mouldings, Air Ducting, Basic Heater
| 12***92 | Plate, Switch | 1 |
| 12***62 | Cover, Front Right Hand, Lower Moulding; Replaced By 12***70, See San 12906 | 1 |
| 12***83 | Console, Switch Housing, Heater; Replaced By 12***71, See San 12906 | 1 |
C3-1-1 Gauges, Instrument Cluster
| 70***00 | Gauge, Fuel | 1 |
| 70***00 | Gauge, Water Temp | 1 |
| 70***00 | Gauge, Warning Lightcluster | 1 |
C3-4-20 Switch, Column, Shuttle Transmission
| 12***58 | Plate, Retainer | 1 |
| 13***03 | Screw, Cap | 2 |
| 70***00 | Switch, Forward & Reverse; Replaced By 70***44, See San 10543 | 1 |
C3-2-1 Cover, Column Switch
| 12***14 | Bracket, Switch Cover Mount | 1 |
| 12***13 | Cover, Column Switch | 1 |
| 14***1Z | Washer, 2 Ba | 1 |
C3-18-10 Interior Mouldings, Air Ducting, Basic Heater
| 12***92 | Plate, Switch | 1 |
| 12***62 | Cover, Front Right Hand, Lower Moulding; Replaced By 12***70, See San 12906 | 1 |
| 12***85 | Console, Heater | 1 |
C3-13-1 Cover, Vandal Proof, Instrument Panel
| 12***86 | Catch, Vandal Cover | 1 |
| 12***91 | Washer, Nylon | 1 |
| 12***67 | Plate, Switch & Gauge, Vandal Proof | 1 |
C3-8-1 Motor, Wiper
| 14***1Z | Washer, 2 Ba | 2 |
| 71***00 | Arm, Wiper | 1 |
| 71***00 | Arm | 1 |
C3-6-1 Switches, Lights, Heater & Wiper, 2ws
| 70***00 | Switch, Ignition; Replaced By 70***84, See San 11449 | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***01 | Cover, 4wd Switch Decal | 1 |
C3-5-1 Heater, Installation
| 12***62 | Cover, Front Right Hand, Lower Moulding; Replaced By 12***70, See San 12906 | 1 |
| 12***85 | Console, Heater | 1 |
| 12***86 | Cover, Front Console, Cab Grey Colour; Replaced By 12***73, See San 12906 | 1 |
C3-9-4 Light, Strobe, Hazard Warning, Amber
| 70***00 | Light, Beacon; Part Is Mss Use 70***00, 12***42, Light, Beacon; Part Is Mss Use 70***00, 12***42, Astro Flash 11, Model Ll 800b Series B. Contact Your Jcb Dealer For Replacement Or Spares. | 1 |
| LL***1A | Bulb | 1 |
| LL***9B | Lens, Amber | 1 |
C3-7-2 Fuse Box & Relays, Shuttle Transmission
| 12***34 | Bracket, Fuse Mounting | 1 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***1Z | Nut, M5-8 | 2 |
C3-17-1 Fan, Face Level, Optional
| 12***11 | Cover, Fan Harness | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-6-10 Switches, Lights, Heater & Wiper, Aws
| 70***00 | Switch, Ignition; Replaced By 70***84, See San 11449 | 1 |
| 70***01 | Key, Door/Ignition, Ref 14657 | 1 |
| 70***01 | Cover, 4wd Switch Decal | 1 |
C3-7-1 Fuse Box & Relays, Shuttle Transmission
| 12***34 | Bracket, Fuse Mounting | 1 |
| 13***6Z | Bolt, M6x70 | 2 |
| 13***20 | Capscrew | 2 |
D Controls-Machine, Engine & Steering
D1-2-40 Cover, Case Controls, Excavator
| 12***55 | Gaiter, Double | 1 |
| 12***56 | Gaiter, Single Lever | 1 |
| 12***27 | Cover, Cab, 4 Lever Excavator | 1 |
D1-2-11 Controls, Excavator, Case System
| 12***57 | Knob, Control | 3 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 12 |
| 12***99 | Rod, Control, 149mm | 2 |
D1-20-1 Controls, Brake Pedal
| 12***01 | Plate, Lock | 1 |
| 12***05 | Pin, Pivot, Brake Pedal | 1 |
| 12***35 | Bracket, Brake Control, Console | 1 |
D1-2-30 Controls, Stabiliser
| 12***02 | Knob, Controls, Yellow | 2 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 4 |
| 12***95 | Rod, Stabiliser Control | 2 |
D1-9-1 Control, Steer Mode Valve, C/W Cable
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***4Z | Bolt | 2 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
D1-8-10 Lever Lock + Pattern, Excavator Valve, Italian Build
| 12***81 | Bar, Lever Lock | 1 |
| 12***16 | Plate, Lock | 1 |
| 12***93 | Lever, Left Hand Stabiliser | 1 |
D1-3-20 Controls, Auxiliary Valve, Backhoe, Optional
| 12***84 | Seal, Auxiliary Pedal | 1 |
| 12***53 | Plate, Auxiliary Pedal | 1 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 1 |
D1-6-1 Controls, Lever, In Cab Boom Lock, 14'0 Centremount
| 12***34 | Lever, Boomlock, Red Grip | 1 |
| 12***36 | Plate, Boom Stop; Replaced By 12***18, See San09544 | 1 |
| 12***01 | Pin, Kinpost Top, Centremount; Replaced By 91***79, 91***80, 83***11,, 82***70. See San11266 | 1 |
D1-1-1 Controls, Loader, Loader Lift, Shovel
| 11***16 | Joint, Universal | 1 |
| 12***72 | Mat, Soundproofing, Loader Valve | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
D1-2-21 Controls, Excavator, Ford System
| 12***55 | Gaiter, Double | 2 |
| 12***93 | Dipper Control, Ford 4 Lever Control; Replaced By 12***54, See San 11158 | 1 |
| 12***04 | Knob, Control | 4 |
D1-21-3 Control, Parking Brake
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***92 | Bracket, Brake Lever Cover | 1 |
| 12***93 | Cover, Brake Lever | 1 |
D1-4-10 Control, Shovel Reset
| 12***02 | Bracket, Saddle | 3 |
| 12***47 | Clip, Cable | 1 |
| 12***42 | Bar | 1 |
D1-2-50 Cover, Ford Controls, Excavator
| 12***55 | Gaiter, Double | 2 |
| 12***71 | Seal, Excavator Controls | 1 |
| 12***90 | Plate, Access, Excavator Valve | 1 |
D1-2-3 Controls, Excavator, Jcb + Pattern
| 11***16 | Joint, Universal | 2 |
| 12***59 | Ring, Tolerance | 2 |
| 12***76 | Grommet, Blind,Hole Dia 50mm, Panel Thickness 3mm | 1 |
D1-7-1 Control Knob, Black, Loader Valve, Single Switch
| 12***90 | Knob, Loader Control, Single Switch | 1 |
| 13***02 | Screw, Grub, M5 X 8mm | 1 |
| 70***00 | Push Button Black, With Microswitch | 1 |
D1-21-2 Control, Parking Brake
| 12***61 | Grommet, Cable/Harness | 1 |
| 12***92 | Bracket, Brake Lever Cover | 1 |
| 12***93 | Cover, Brake Lever | 1 |
D1-24-1 Control, Gear Change
| 12***50 | Gaiter | 1 |
| 12***88 | Lever, Gear | 1 |
| 13***1Z | Bolt, M10 X 45mm | 1 |
D1-1-10 Controls, Loader, Auxiliary, Optional
| 11***16 | Joint, Universal | 1 |
| 12***11 | Knob, Black | 1 |
| 12***02 | Gaiter, Control | 1 |
D1-3-30 Controls, Auxiliary, Case System
| 12***57 | Knob, Control | 1 |
| 12***49 | Lever, Control; Replaced By 12***53, See San 11158 | 1 |
| 12***89 | Pin, Spring,8mm Clevis; Superseded By 91***01 See San 20228 | 1 |
D1-4-2 Control, Shovel Reset
| 12***85 | Cam, Plate | 1 |
| 13***2Z | Nut, M8 | 1 |
| 13***2Z | Nut, M12 | 1 |
D1-20-10 Controls, Brake Pedal, 214se
| 12***05 | Pin, Pivot, Brake Pedal | 1 |
| 12***16 | Pedal, Single Brake Control, 214se | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
D1-20-2 Controls, Brake Pedal
| 12***01 | Plate, Lock | 1 |
| 12***05 | Pin, Pivot, Brake Pedal | 1 |
| 12***89 | Pedal, Left Hand Brake | 1 |
D1-4-11 Control, Shovel Reset
| 13***2Z | Nut, Thin M20 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 26***24 | Bar | 1 |
D1-4-1 Control, Shovel Reset
| 12***85 | Cam, Plate | 1 |
| 12***39 | Link, Anti-Spill | 1 |
| 12***45 | Spacer | 1 |
D1-8-1 Lever Lock X Pattern, Excavator Valve, Italian Build
| 12***81 | Bar, Lever Lock | 1 |
| 12***25 | Plate, Lock | 1 |
| 12***00 | Lever, Excavator Control, Left Hand Pattern | 1 |
D2-1-1 Controls, Throttle & Stop
| 12***03 | Pedal, Assembly, Throttle Control | 1 |
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***5Z | Bolt | 5 |
D2-1-0 Controls, Throttle & Stop
| 12***06 | Bracket, Throttle Reaction | 1 |
| 12***03 | Pedal, Assembly, Throttle Control | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
D3-1-2 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
E Hydraulics & Air Including, Steering
E1-26-1 Circuit, H.B.P Valve, Dipper Ram
| 12***37 | Bracket, Valve Mounting, 130mm Dia. | 1 |
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
E1-8-1 Circuit, Boom Ram, 1400
| 13***4Z | Nut | 1 |
| 13***5Z | Nut | 1 |
| 61***00 | Hose | 1 |
E1-6-1 Circuit, Slew/Swing
| 14***11 | Seal, Bonded | 2 |
| 16***02 | Adapter, 1/4" Bsp M/M | 2 |
| 16***02 | Adapter | 2 |
E1-5-10 Circuit, Steering, 2ws 4wd
| 12***26 | Pipe, Steering, Transmission 2ws 4wd; Replaced By 12***65 + 81***01 & 14***15, See San 10358 | 1 |
| 12***65 | Pipe, Steering & Trans, 2ws/4wd | 1 |
| 13***8Z | Screw, M8x30 | 1 |
E1-4-1 Circuit, Transmission, 2ws
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
| 22***05 | Clip, Jubilee | 4 |
E1-9-1 Circuit, Dipper Ram, 1400
| 12***36 | Clamp | 2 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***4Z | Nut | 2 |
E1-21-1 Circuit, Attachment, Hammer
E1-10-13 Circuit, Bucket Ram, Extradig Dipper, 1400
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
| 12***36 | Clamp | 1 |
E1-27-20 Boom Ram Pipework
| 65***63 | Pipe, Boom Ram; Replaced By 83***16, See San 13611 | 1 |
E1-7-10 Circuit, Stabiliser, Centremount
| 13***8Z | Screw, M8x30 | 4 |
| 14***11 | Seal, Bonded | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-1-30 Circuit, Neutral, Auxiliary Lowflow
| 61***00 | Hose, 3/4"Bsp X 780mm | 1 |
| 62***38 | Hose, 3/4"Bsp 780mm | 1 |
| 63***00 | Hose | 1 |
E1-17-1 Circuit, Q-Fit Carriage
| 13***6Z | Bolt | 2 |
| 13***1Z | Nut | 2 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-10-10 Circuit, Bucket Ram, Extradig Dipper, 1400
| 12***85 | Pipe | 1 |
| 12***86 | Pipe, Left Hand | 1 |
| 12***00 | Cluster, Pipe, Bucket, Auxiliary | 1 |
E1-26-2 Circuit, H.B.P Valve, Dipper Ram
| 12***04 | Bracket, Valve Mounting, 120mm Dia. | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
E1-1-1 Circuit, Neutral, Basic Build
| 12***91 | Pipe, 2ws Oil Cooler; Replaced By 12***65, See San09822 | 1 |
| 12***24 | Valve, Dual Check | 1 |
| 12***26 | Pipe, Return, Centremount | 1 |
E1-18-1 Cooler, Hydraulic, Transmission, White Spot Aa Build
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
| 12***81 | Adapter; Replaced By 12***06, See San10199 | 2 |
E1-18-10 Cooler, Hydraulic, Transmission, Blue Spot Ab Build
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
| 12***70 | Adapter, Assembly | 4 |
E1-0-2 O Rings, Hydraulic Hoses
| 23***06 | O Ring, 3/8"Bsp | 1 |
| 23***10 | O Ring, 1/2"Bsp | 1 |
| 23***11 | O Ring, 5/8"Bsp | 1 |
E1-10-1 Circuit, Bucket Ram, Mono Dipper, 1400
| 12***56 | Spacer, Steel | 2 |
| 12***00 | Pipe | 1 |
| 13***0Z | Bolt, M10 X 40 | 2 |
E1-10-4 Circuit, Bucket Ram, Mono Dipper, 1400
| 12***36 | Clamp | 1 |
| 12***56 | Spacer, Steel | 2 |
| 13***4Z | Bolt | 1 |
E1-5-1 Circuit, Steering, 2ws 2wd
| 12***29 | Pipe, Steering, Transmission 2ws 2wd; Replaced By 12***64 + 81***01 & 14***15, See San 10357 | 1 |
| 12***64 | Pipe, Steering & Trans, 2ws/2wd | 1 |
| 13***8Z | Screw, M8x30 | 1 |
E1-30-1 Circuit, Breaker, Changeover Valve
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
| 16***04 | Adapter, Male/Male | 6 |
| 25***00 | Valve, Change Over; Replaced By Mss Use 92***20 + 16***06 X2,, 81***16 X1. See San 12991 Pi A01/005 | 2 |
E1-34-1 Circuit, Loader Lift, Suspension, Gear Pump
| 12***48 | Bracket, Valve Mounting | 1 |
| 12***49 | Bracket, Accumulator Mounting | 1 |
| 13***8Z | Bolt, M10 X 30 | 3 |
E1-11-3 Circuit, Auxiliary, Extention Ram, Extradig Dipper 1400, Gear Pump
| 12***36 | Clamp | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***4Z | Nut | 2 |
E1-2-1 Circuit, Loader Arm
| 12***12 | Spacer, Steel, 10mm Long | 2 |
| 12***59 | Pipe, Loader X Over | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
E1-11-30 Circuit, Auxiliary, Jaw Bucket, Extradig Dipper
| 12***20 | Pipe, Bucket Ram, Left Hand | 1 |
| 12***21 | Pipe, Bucket Ram, Right Hand | 1 |
| 12***66 | Pipe, Inner Dipper, Right Hand | 1 |
E1-3-1 Circuit, Auxiliary, Loader
| 12***23 | Pipe, Loader Arms +, Auxiliary | 1 |
| 12***36 | Pipe, Left Hand Auxiliary, Loader Arms | 1 |
| 12***37 | Pipe, Right Hand Auxiliary, Loader Arms | 1 |
E1-5-20 Circuit, Steering, Aws
| 13***0Z | Bolt, M10 X 40 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
| 14***8Z | Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also N524275 & 52***55, Washer, Spring M10; Replaces 60***8r & 60***08, Replaces Luu0105-San 12222, Used On Outlet Adapter, Item 5. Also M524275 & 52***55 | 1 |
E1-16-1 Circuit, Auxiliary, Hand Held Tools
E1-1-10 Circuit, Neutral, Basic Build
| 12***24 | Valve, Dual Check | 1 |
| 12***26 | Pipe, Return, Centremount | 1 |
| 13***0Z | Bolt, M10 X 40 | 3 |
E1-26-20 Dipper Ram Pipework
| 12***74 | Clamp, Pipe Support | 1 |
| 22***19 | Clip, Jubilee | 1 |
| 22***20 | Clip, Jubilee, 156-178mm | 1 |
E1-11-1 Circuit, Auxiliary, Extention Ram, Extradig Dipper 1400
| 12***00 | Cluster, Pipe, Bucket, Auxiliary | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
| 13***4Z | Nut | 2 |
E1-4-10 Circuit, Transmission, Aws
| 12***02 | Mounting, Cooler | 2 |
| 12***04 | Spacer | 4 |
| 13***1Z | Screw, Hex Head, M8 X 12 | 6 |
E2-2-10 Pump, Main Hydraulic, Single 51 Ccr, Pump Code J077701, Engine Side Mounted
| 02***37 | Gasket | 1 |
| 13***1Z | Bolt, M10 X 45mm | 1 |
| 13***3Z | Nut, M12 | 2 |
E2-4-1 Shaft, Pump Drive, 2ws
| 12***57 | Spacer | 1 |
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***04 | Screw, Grub | 1 |
E2-2-2 Pump, Main Hydraulic, Single 51 Ccr, Pump Code J101702
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***3Z | Nut, M12 | 2 |
E2-2-1 Pump, Main Hydraulic, Single 50 Ccr, Pump Code 6197
| 13***8Z | Bolt | 4 |
| 13***4Z | Bolt, M12 X 60mm | 2 |
| 13***3Z | Nut, M12 | 2 |
E3-10-1 Valve, Steering, 2ws, 200 Load Sensing
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***06 | O Ring | 1 |
E3-6-30 Valve, Relief, Dipper Head Side, Boom Head Side, Bucket & Slew
| 25***01 | Plug | 1 |
| 25***01 | Kit-Seal; Replaced By 25/62***06, See San 10352 | 2 |
| 25***00 | Valve, Relief, 3600 Psi, Valve, Relief, 3600 Psi; Breaker M/C'S Only. Bucket. This Arv Is Fitted In Place Of Bucket Arv Blanking Plug. | 4 |
E3-6-10 Valve, Excavator, Centremount
| 25***02 | Retainer, Wiper | 6 |
| 25***08 | Cover | 6 |
| 25***10 | Screw, Cap | 12 |
E3-7-1 Filter, Hydraulic
| 24***24 | O Ring | 1 |
| 27***00 | Filter, Hydraulic, Assembly, 10 Micron | 1 |
| 32***00 | Element, Hydraulic Filter, 10 Micron; San 22618.Cwe To 32/92***46.Ref Pi A01/187, P Guest/M Mcarthy. P Gamble 20/09***06 | 1 |
E3-10-20 Valve, Steering, Aws
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***03 | O Ring | 1 |
E3-3-21 Valve Assembly, Excavator Auxiliary
| 25***02 | Valve, Relief, 138bar | 1 |
| 25***03 | Valve, Relief, 207 Bar | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
E3-9-10 Valve, Priority
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 2 |
E3-11-1 Valve, Steering Mode
| 16***03 | Adapter | 2 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***05 | O Ring | 1 |
E3-2-30 Valve, Main Relief, Loader Valve
| 25***01 | Valve, Relief | 1 |
| 25***02 | Kit-Repair, Relief Valve | 1 |
E3-2-20 Valve, Spool, Standard, 2 Spool Loader Valve
| 25***24 | Seat | 2 |
| 25***01 | Screw | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E3-2-1 Valve, Loader, 2 Spool, With Float
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 4 |
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 1 |
E3-2-40 Valve, Section, Electric Detent
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 1 |
E3-6-40 Plugs, Excavator Valve, Centremount
| 24***03 | O Ring | 1 |
| 25***16 | O Ring | 1 |
| 25***23 | Plug, Assembly | 1 |
E3-3-2 Valve, Auxiliary, Backhoe, Monoblock
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 2 |
| 24***07 | O Ring | 3 |
E3-8-2 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, Fuel Filter, Canister Type | 1 |
E3-5-10 Valve Adapters, Excavator, 1400
| 16***06 | Adapter, 39.5mm Lg. M/M | 1 |
| 16***07 | Adapter | 4 |
| 16***10 | Adapter, Includes 'O'Ring | 2 |
E3-2-35 Valve, Auxiliary Relief, 2 & 3 Sool Loader Valve
| 25***32 | Kit-Repair | 1 |
| 25***03 | Valve, Relief | 1 |
| 25***05 | Valve, Relief, Auxiliary | 1 |
E3-9-11 Valve, Priority
| 13***7Z | Bolt, M8 X75mm Long | 1 |
| 14***7Z | Washer, Spring | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 1 |
E3-2-10 Valve, Loader, 3 Spool, With Float
| 16***05 | Adapter, 3/4"Unf O-Ring Boss, 1/2"Bsp Male | 6 |
| 16***07 | Adapter | 1 |
| 16***09 | Adapter; Superseded To 16***58 D.Jackson 16/05/08, San26156 (Pi R02728 Aa) Leak Free | 1 |
E3-10-10 Valve, Steering, 2ws, 250 Load Sensing
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 2 |
| 24***03 | O Ring | 1 |
E3-6-20 Valve, Relief, Dipper Rod Side, Boom Rod Side
| 25***01 | Kit-Seal; Replaced By 25/62***06, See San 10352 | 1 |
| 25***00 | Valve, Relief, 3600 Psi, Valve, Relief, 3600 Psi; Breaker M/C'S Only. Bucket. This Arv Is Fitted In Place Of Bucket Arv Blanking Plug. | 1 |
| 25***06 | Kit-Seal, With Locking O Ring; Cwe By 25/22***05 See San 20222 - Tech Service, To Issue A Ti | 1 |
E3-2-25 Valve, Spool, Mechanical Detent, 2 Spool Loader Valve
| 25***24 | Seat | 2 |
| 25***01 | Screw | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
E4-7-1 Ram, Bucket, Mono Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***16 | Ram, Bucket, Mono Dipper; Replaced By 55***31, See San 10406 | 1 |
E4-13-18 Seal Kit, Bucket Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-5-20 Ram, Boom, Standard Lift, 110mm Cyl X 60mm Rod
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 56***63 | Ram, Boom Hbcv (Yellow), 110mm Cyl X 60mm Rod; Replaced By 56***89 + 24***12, See San09952 | 1 |
| 56***87 | Ram, Boom, In Black; Replaced By 56***90 + 24***12, See San09952 | 1 |
E4-8-1 Ram, Extension, Extradig Dipper
| 55***86 | Ram, Extension, 70mm Cyl X 40mm Rod; Replaced By 55***35, See San 12827 | 1 |
| 55***58 | Ram, Extension, Extradig Dipper | 1 |
| 55***86 | Cylinder, Extension Ram | 1 |
E4-13-18 Seal Kit, Stabiliser, Ram, Centremount
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-13-14 Seal Kit, Boom Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***14 | O Ring | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-1-1 Ram, Lift, Standard
| 12***15 | Bush | 1 |
| 12***19 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-10-1 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***20 | Ram, Stabiliser, Centremount; Replaced By 55***72 + 81***10 X2., See San 12739 | 2 |
E4-7-3 Ram, Bucket, Mono Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***31 | Ram, Bucket, Mono Dipper, 60mm Rod X 90mm Cyl; Replaced By 55***61, See San 12827 | 1 |
E4-3-20 Ram, Steering, Aws, Rear Axle, 75mm Cyl X 50mm Rod
| 14***2Z | Washer, M20 | 4 |
| 23***07 | O Ring | 2 |
| 24***26 | Seal, 50 X 60 X 8.0 | 2 |
E4-2-1 Ram, Shovel
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-7-12 Ram, Bucket, Extradig Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***30 | Ram, Bucket, 60mm Rod X 90mm Cyl; Replaced By 55***60, See San 12827 | 1 |
E4-13-11 Seal Kit, Clam Shove, L Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-13-14 Seal Kit, Dipper Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***14 | O Ring | 2 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-6-20 Ram, Dipper, Standard Lift, 100mm Cyl X 60mm Rod.
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
| 55***04 | Spring | 1 |
| 55***05 | Restrictor | 1 |
E4-3-10 Ram, Steering, Aws, Front Axle, 75mm Cyl X 45mm Rod
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
E4-13-13 Seal Kit, Bucket Ram
| 23***55 | O Ring | 1 |
| 23***10 | O Ring | 1 |
| 24***06 | Seal, 50mm Rod | 1 |
E4-13-21 Seal Kit, Bucket Ram
| 23***55 | O Ring | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-3-1 Ram, Steering, 2wd
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
E4-11-11 Ram, Slew/Swing, Centremount
| 14***15 | Washer, Seal; Replaces Khj0891 | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 16***02 | Adapter | 1 |
E4-13-11 Seal Kit, Shovel Ram
| 23***08 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***04 | Seal, 40mm Rod | 1 |
E4-3-2 Ram, Steering, 4wd
| 13***8Z | Bolt, M20 X 80mm | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
| 14***2Z | Washer, M20 | 4 |
E4-13-12 Seal Kit, Lift Ram
| 23***55 | O Ring | 1 |
| 23***08 | O Ring | 1 |
| 24***06 | Seal, 50mm Rod | 1 |
E4-7-10 Ram, Bucket, Extradig Dipper
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
| 55***06 | Ram, Bucket, 45mm Hole, 50mm Rod X 90mm Cyl; Replaced By 55***30, See San 10406 | 1 |
E4-13-18 Seal Kit, Dipper Ram
| 23***06 | O Ring, 60 X 5.0 | 1 |
| 23***12 | O Ring, 90 X 5.0 | 1 |
| 24***08 | Seal, 60 X 75 X 11.4 | 1 |
E4-15-1 Ram, Quickhitch
| 53***00 | Ram, Complete, (1/4 Bsp Ports) | 1 |
| 53***01 | Cylinder, (1/4 Bsp Ports) | 1 |
| 53***02 | Cap, End | 1 |
E4-4-1 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 12***27 | Pipe | 1 |
E4-11-10 Ram, Slew/Swing, Centremount
| 14***15 | Washer, Seal; Replaces Khj0891 | 8 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 22***17 | Clip, Worm Drive | 2 |
F Axles, Wheels & Transmission
F1-11-1 Axle Assembly, Aws, Steering, Maxtrac Diff 448/56900
| 12***38 | Stop, Lock, 35mm Long | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***82 | Circlip | 2 |
F1-30-10 Power Trackrod, 2ws, 4wd
| 12***89 | Gaiter | 2 |
| 12***55 | Gaiter | 2 |
| 12***53 | Link, Trackrod, M24/M22 | 2 |
F1-11-20 Hub & Components Aws, Steering Axle, 448/56900
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F1-1-1 Axle Assembly, 2ws, 4wd Steering, 18 : 1 Ratio 448/56020
| 12***19 | Stop, Axle Lock, 15mm | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 22***82 | Circlip | 2 |
F1-1-30 Differential, 2ws, 4wd Steering Axle, 448/56030
| 21***16 | Pin, Tension | 1 |
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-30-20 Power Trackrod, Aws Front
| 12***89 | Gaiter | 2 |
| 12***55 | Gaiter | 2 |
| 12***97 | Link, Trackrod, 214es Aws Front Axle | 2 |
F1-10-1 Axle Assembly, 2ws, 2wd Steering
| 12***02 | Pin, Cotter | 2 |
| 12***03 | Axle, Stub | 2 |
| 12***06 | Washer; Replaced By 45***41, See San 13487 | 2 |
F1-11-10 Knuckle, Aws, Steering Axle, 448/56900
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***09 | Screw | 8 |
| 44***02 | Ring, Masking | 2 |
F1-1-20 Hub & Components 2ws, 4wd Steering Axle, 448/56020
| 13***7Z | Bolt, Coated | 4 |
| 22***41 | Circlip | 6 |
| 22***57 | Circlip, External | 2 |
F1-1-10 Knuckle, 2ws, 4wd Steering Axle, 448/56020
| 13***09 | Screw | 16 |
| 44***02 | Trunnion; Replaced By 45***01 | 4 |
| 44***31 | Joint, Knuckle Swivel | 1 |
F1-3-1 Axle Pivot Pin, & Greasing, 2ws, 2wd/4wd
| 12***23 | Adhesive, Washer | 2 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
| 13***3Z | Nut, M12 | 1 |
F1-11-30 Differential, Aws, Steering Axle, 448/56900 Maxtrac Diff
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***08 | Pin, Trunnion | 1 |
F2-1-11 Differential 2ws, Assembly, 15.78 : 1, 35kph 450/43840
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***02 | Sealant, Locking | 0 |
F2-11-60 Brakes, Axle, 453/33060
| 22***71 | Circlip, External | 4 |
| 33***63 | Carrier, Brake Plate; See Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate, Carrier, Brake Plate; Note 1. Kit 99***39 Uses All Items A Kit 99***40 Uses All Items B, Carrier, Brake Plate; Note 1. 45***15 Not To Be Used Please Use 33***3x 2., Carrier, Brake Plate; Note 1. Must Do Both Sides | 2 |
| 45***13 | Pin, Reaction | 6 |
F2-1-10 Differential 2ws, Assembly, 15.78 : 1, 35kph 450/36700
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
| 41***51 | Sealant, Threadlock, 50ml | 0 |
F2-3-20 Crown Wheel & Pinion, 2ws, 15.78 : 1, 35kph, C/W L.S.D. 450/37000, 450/43860
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***10 | Differential, Lsd Assembly, 3 Working Faces | 1 |
| 45***37 | Gear, Crown Wheel & Pinion, 13t/38t See Gen209; San 22279.S/S Nla..P G 20/03/06.San 22429, Pi 450/316.See Ti' Gen 209 | 1 |
F2-1-1 Axle Assembly 2ws, Rear Drive 15.78 : 1, 35kph 450/36700, 450/43840
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-11-10 Knuckle, Steering, Aws Rear Axle, 453/33060 C/W L.S.D.
| 13***09 | Screw | 16 |
| 41***02 | Sealant, Locking | 1 |
| 45***40 | Joint, Knuckle Swivel | 1 |
F2-11-30 Differential Aws, Assembly, 13.7 : 1, 40kph 453/33060
| 13***07 | Capscrew | 8 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 41***02 | Sealant, Locking | 0 |
F2-11-40 Crown Wheel & Pinion, Aws, 13.7 : 1, 40kph 453/33060 L.S.D.
| 45***00 | Differential, Assembly, Lsd | 1 |
| 45***00 | Gear, Crown Wheel & Pinion, 13t/33t; Replaced By 45***40, See San 10572 | 1 |
| 82***80 | Bolt | 12 |
F2-30-1 Power Trackrod, Aws Rear Axle
| 12***73 | Disc, Sensor | 1 |
| 12***11 | Cover, Rear Sensor | 1 |
| 12***12 | Bracket, Rear Sensor | 1 |
F2-3-40 Differential 2ws, Components, L.S.D. 450/37000, 450/43860
| 13***8Z | Bolt, M10x80 | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F2-11-20 Hub & Components Aws, Rear Axle, 453/33060
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 45***05 | Gear, Annulus Ring | 2 |
F2-1-31 Brakes, Axle, 450/43840
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-3-1 Axle Assembly 2ws, Rear Drive 15.78 : 1, 35kph C/W L.S.D. 450/37000, 450/43860
| 13***7Z | Bolt, Coated | 4 |
| 13***6Z | Bolt | 32 |
| 14***0Z | Washer; Replaced By 82***78, See San09459 | 4 |
F2-3-30 Brakes, Axle, 450/37000
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-3-11 Differential 2ws, Assembly, 15.78 : 1, 35kph C/W L.S.D. 450/43860
| 13***07 | Capscrew | 8 |
| 41***02 | Sealant, Locking | 0 |
| 41***12 | Multigasket | 0 |
F2-1-20 Crown Wheel & Pinion, 2ws, 15.78 : 1, 35kph 450/36700, 450/43840
| 13***8Z | Bolt, M10x80 | 8 |
| 45***00 | Gear, Crownwheel/Pinion, 13t/38t | 1 |
| 45***00 | Casing, Assembly, Differential | 1 |
F2-1-30 Brakes, Axle, 450/36700
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
F2-3-10 Differential 2ws, Assembly, 15.78 : 1, 35kph C/W L.S.D. 450/37000
| 13***07 | Capscrew | 8 |
| 41***51 | Sealant, Threadlock, 50ml | 0 |
| 41***51 | Sealant, Threadlocker, 50ml | 0 |
F2-11-1 Axle Assembly Aws, Rear Drive 13.7 : 1, 40kph C/W L.S.D. 453/33060
| 13***16 | Bolt, M16x70l | 28 |
| 22***82 | Circlip | 2 |
| 44***02 | Ring, Masking | 2 |
F2-3-31 Brakes, Axle, 450/43860
| 22***71 | Circlip, External | 4 |
| 22***20 | Circlip | 6 |
| 44***05 | Bush, Tension, Flanged - External | 6 |
F2-11-50 Differential Aws, Components, L.S.D. 453/33060
| 13***18 | Bolt | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Pressure | 2 |
F3-6-4 Wheel & Tyre, Assembly, Front & Rear, Aws 17.5x24
| 10***01 | Nut | 20 |
| 12***15 | Wheel, & Tyre Assembly, 17.5lx24 Xm27 | 4 |
| 12***90 | Wheel, & Tyre Assembly, 17.5lx24 Xm27 Radial | 4 |
F3-4-1 Wheel & Tyre, Assembly, Front, 2ws 4wd 12x16.5
| 10***01 | Nut | 8 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 12***68 | Wheel, & Tyre Assembly, 12x16.5 Armstrong | 2 |
F3-5-1 Wheel & Tyre, Assembly, Rear, 2ws 2wd 17.5x24
| 10***01 | Nut | 10 |
| 12***69 | Wheel, & Tyre Assembly, 17.5x24x10pr | 2 |
| 15***01 | Valve | 1 |
F3-1-2 Propshaft, Transmission, Front Drive Axle, Manual
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***03 | Kit-End Cap | 1 |
F3-1-1 Propshaft, Transmission, Front Drive Axle, Manual
| 11***25 | Strap | 4 |
| 81***75 | Nipple, Grease | 1 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
F3-3-1 Wheel & Tyre, Assembly, Front, 2ws 2wd 11.0x16
| 12***19 | Wheel, & Tyre Assembly, 11x16 12pr Armstrong | 2 |
| 12***98 | Wheel, & Tyre Assembly, 11lx16x12 Goodyear | 2 |
| 15***01 | Valve | 1 |
F3-5-3 Wheel & Tyre, Assembly, Rear, 2ws 4wd 17.5x24
| 10***01 | Nut | 10 |
| 12***87 | Wheel, & Tyre Assembly, 17.5x24x10pr | 2 |
| 15***01 | Valve | 1 |
F3-6-3 Wheel & Tyre, Assembly, Front & Rear, Aws 16.9x24
| 10***01 | Nut | 10 |
| 12***40 | Wheel, & Tyre. Armstrong, 16.9x24x12pr | 4 |
| 12***89 | Wheel, & Tyre Assembly, 16.9x24x12 Titan | 4 |
F3-5-2 Wheel & Tyre, Assembly, Rear, 2ws 4wd 19.5lx24
| 10***01 | Nut | 10 |
| 12***46 | Wheel, & Tyre. Armstrong, 19.5lx24x10pr | 2 |
| 12***47 | Wheel, & Tyre. Armstrong, 19.5lx24x12pr | 2 |
F3-6-1 Wheel & Tyre, Assembly, Front & Rear, Aws 14.9x24
| 10***01 | Nut | 20 |
| 12***88 | Wheel, & Tyre Assembly, 14.9x24x10 Titan | 4 |
| 12***99 | Wheel, & Tyre Assembly, 14.9x24x10 Titan | 4 |
F3-2-2 Propshaft, Transmission, Rear Drive Axle, Manual
| 11***25 | Strap | 2 |
| 13***2Z | Bolt | 4 |
| 13***3Z | Nut | 4 |
F5-4-1 Transmission Assy, Ss640 Syncro Shuttle, 2ws 4wd 24" Wheels & Aws 445/75900
| 21***05 | Dowel | 2 |
| 22***71 | Circlip | 1 |
| 33***59 | Bracket, Brake Caliper Mount, Hayes Caliper | 1 |
F5-4-10 Transmission 2ws 4wd, Jcb Syncro Shuttle, External Components 445/75900 & Aws
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 18 |
F5-8-1 Transmission, Mounting, Jcb Syncro Shuttle
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 4 |
| 12***06 | Bracket, Transmission Mount, 2ws | 1 |
F5-7-3 Torque Converter, 2.8 : 1 Ratio, Drive Plate & Trans Dipstick
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***03 | Bolt | 6 |
F5-4-50 Transmission 2ws 4wd, Gear Change, 445/75900 & Aws
| 22***80 | Circlip | 1 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 2 |
F5-1-20 Transmission 2ws 2wd, Internal Components, 445/75400
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F5-4-30 Transmission 2ws 4wd, Reverser Unit, 445/75900 & Aws
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-9-1 Flywheel Housing, Cover Plate
| 13***3Z | Screw, M8 X 16 | 1 |
| 99***00 | Cover, Plate Assembly, Flywheel | 1 |
| 99***01 | Plate, Outer | 1 |
F5-7-2 Torque Converter, 12.2"Dia 2.8 : 1 Ratio, Drive Plate & Transmission Dipstick
| 04***00 | Converter, 12.2"Dia - 2.82:1, Purple/Yellow/Purple | 1 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***02 | Bolt, M8 X 20 | 6 |
F5-1-1 Transmission Assy, Ss620 Syncro Shuttle, & External Components, 2wd 2ws 445/75400
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***8Z | Bolt, M10 X 30 | 18 |
F5-1-50 Transmission 2ws 2wd, Gear Change, 445/75400
| 22***80 | Circlip | 1 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 2 |
F5-10-1 Fasteners, Flywheel Housing, Transmission To Gearbox
| 02***70 | Dowel | 2 |
| 13***2Z | Bolt, M12 X 50mm | 1 |
| 13***0Z | Bolt, M12 X 100mm | 1 |
F5-4-40 Transmission 2ws 4wd, Clutch Unit, Drop Box 445/75900 & Aws
| 22***15 | Circlip | 1 |
| 44***05 | Plate, Friction | 10 |
| 44***04 | Retainer, Spring | 1 |
F5-11-1 Dipstick, Ss620, Ss640, Transmission
| 12***42 | Tube, Filler | 1 |
| 12***99 | Dipstick | 1 |
| 12***04 | Bracket, Gearbox Filler | 1 |
F5-1-30 Transmission 2ws 2wd, Reverser Unit, 445/75400
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-4-20 Transmission 2ws 4wd, Internal Components, 445/75900 & Aws
| 13***3Z | Bolt, M10 X 16 | 4 |
| 44***03 | Sleeve | 1 |
| 44***05 | Spacer, Collapsible | 1 |
G Brakes
G1-2-1 Brakes, Rear Axle
| 22***71 | Circlip, External | 4 |
| 45***13 | Pin, Reaction | 6 |
| 45***15 | Carrier, Brake Plate | 2 |
G1-3-2 Brake, Parking
| 15***01 | Kit-Brake Pad; Replaced By 15/92***03 | 1 |
| 15***03 | Kit, Spring | 1 |
| 15***04 | Kit, Rotor; Now Supplier Number Is 98-18015 | 1 |
G1-1-10 Brake, System
| 12***41 | Cover, Reservoir; Replaced By 16***43, See San 10088 | 1 |
| 12***42 | Seal, Splash Guard | 1 |
| 12***16 | Pipe, Servo Link | 1 |
G1-3-1 Brake, Parking
| 13***04 | Nut | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 13***3Z | Nut, Lock, M10 | 1 |
N Engines 1004-4, Aa Builds
N1-3-1 Block Assembly, Aa Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
N1-8-1 Engine Mountings, 2ws
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***01 | Bracket, Engine Mounting, Left Hand | 1 |
N1-7-1 Flywheel, & Starter Ring Gear, Aa Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***25 | Washer | 6 |
N1-5-3 Fans, Pulleys, & Fan Belt, Aa & Ab Builds, 1.06 : 1 Fan Speed
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***52 | Fan, Alternator | 1 |
N1-5-2 Fans, Pulleys, & Fan Belt, Air Conditioning, Aa Builds, 0.85 : 1
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
N1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-2-11 Engine, Long, Aa Build
| 01***00 | Engine, Complete 1004-4,75hp, Nat/Asp C/W Cooler | 1 |
N1-1-1 Engine, Complete, Aa Build
| 01***00 | Engine, Complete 1004-4,75hp, Nat/Asp C/W Cooler | 1 |
N1-5-1 Fans, Pulleys, & Fan Belt, Aa Build, 0.85 : 1 Fan Speed
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 1 |
| 02***17 | Block, Thrust | 1 |
N1-6-1 Timing Case, Camshaft & Gears, Aa Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
N1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Aa Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 4 |
N1-5-4 Fans, Pulleys, & Fan Belt, Air Conditioning, Aa & Ab Builds, 1.06 : 1
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
N1-2-1 Engine, Short, Aa Build
| 02***40 | Engine, Short, Nat/Asp | 1 |
N2-3-1 Rocker Cover
| 02***90 | Spring | 1 |
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 3 |
N2-2-1 Rocker Assembly, Push Rods & Tappets, Aa Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
N2-1-1 Cylinder Head, Aa Build
| 02***24 | Collet | 8 |
| 02***95 | Plug, Taper | 1 |
| 02***20 | Bolt, Cylinder Head | 8 |
N2-4-1 Lifting Plates, Engine, Aa Build
| 02***13 | Plate, Lifting | 1 |
| 02***31 | Plate, Lifting | 1 |
| 02***71 | Bolt | 2 |
N3-1-1 Manifold, Induction, Aa Build
| 02***98 | Plug | 1 |
| 02***10 | Plug | 1 |
| 02***07 | Gasket | 1 |
N3-4-1 Silencer & Extension, Naturally Aspirated, Aa Build
| 02***03 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 12***26 | Strip, Clamping | 1 |
N3-3-3 Filter, Pre-Cleaner, Optional
| 32***00 | Filter, Pre-Cleaner | 1 |
| 32***01 | Cover, Assembly | 1 |
| 32***02 | Bowl | 1 |
N3-2-1 Manifold, Exhaust, Aa Build
| 02***50 | Gasket | 2 |
| 02***74 | Manifold, Exhaust | 1 |
| 02***02 | Stud | 3 |
N3-3-1 Filter, Air, Naturally Aspirated, Aa Build
| 12***38 | Plate, Tower | 1 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
N4-3-1 Radiator, Fittings & Mountings, 2ws
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***69 | Guard, Cooling Fan, Left Hand | 1 |
N4-4-2 Radiator & Hoses, Aa Build, 2ws With 5 Row Oil Cooler
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
| 12***37 | Tank, Expansion | 1 |
N4-1-1 Pump, Water, Aa Build
| 02***82 | O Ring | 1 |
| 02***83 | Seal | 1 |
| 02***86 | Gasket | 1 |
N4-2-2 Thermostat, Housing, Inlet & Outlet, Air Conditioned, Aa Builds
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***03 | Plug, Core", D=26mm | 1 |
N4-3-2 Radiator, Fittings & Mountings, Air Conditioning Builds, 2ws
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***68 | Guard, Cooling Fan, Left Hand | 1 |
N4-2-1 Thermostat, Housing, Inlet & Outlet, Aa Build
| 02***95 | Plug, Taper | 2 |
| 02***92 | Thermostat | 1 |
| 02***03 | Plug, Core", D=26mm | 1 |
N4-4-1 Radiator & Hoses, Aa Build, 2ws With 4 Row Oil Cooler
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
| 12***37 | Tank, Expansion | 1 |
N5-5-1 Cooler, Oil, Filter & Pipework, Aa Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
N5-1-1 Sump, Oil, Aa Build
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
N5-2-1 Pump, Oil, & Relief Valve, Aa Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
N6-2-1 Injectors, Fuel, & Injection Pipes, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N6-5-1 Fuel Heater, & Fuel Feed Pipe, Aa Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
N6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
N6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
N6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
N6-3-1 Fuel Pipes, Injection Pump, Aa Build
| 02***87 | Damper, Vibration | 2 |
| 02***88 | Plate | 2 |
| 02***17 | Nut | 4 |
N6-1-1 Pump, Fuel Injection, Aa Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***79 | Gasket, Inj/Pump To T/Case | 1 |
N6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***17 | Nut | 2 |
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
N6-2-3 Injectors, Fuel, & Injection Pipes, Alternative, Aa Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 2 |
N7-5-1 Compressor 12.Volt, Air Conditioning
| 12***37 | Valve, Pressure | 1 |
| 12***41 | Shim | 3 |
| 12***54 | Spacer | 2 |
N7-4-1 Pump, Vacuum
| 15***00 | Pump, Vacuum | 1 |
| 15***01 | Housing | 1 |
| 15***02 | Valve, Body | 1 |
N7-4-2 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 1 |
| 15***11 | Bearing | 2 |
N7-8-1 Cold Start, Ether
| 12***09 | Block, Or Fitting | 1 |
| 12***10 | Clamp | 1 |
| 12***11 | Canister, Fluid | 1 |
N7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
N7-7-1 Block Heater, Freeze Plug Type, Optional, Aa Build
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
N7-7-2 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 12***46 | Bracket, Mounting | 1 |
| 13***3Z | Screw, M6x16 | 2 |
N8-1-1 Gasket Sets, Aa Build
| 02***77 | Kit-Gasket, Bottom | 1 |
| 02***11 | Kit-Gasket, Top | 1 |
N8-2-1 Kit, Engine Overhaul, Aa Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***02 | Liner, Cylinder, Slip Fit | 4 |
P Engines 1004-4 Low Emission, Ar & Ak Builds
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-1-1 Engine, Complete, Ar Build
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated, 75bhp | 1 |
P1-4-4 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-6-1 Timing Case, Camshaft & Gears, Ar Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-3-2 Block Assembly, Ak Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-3-4 Block Assembly, Ak Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-1 Engine, Short, Ar Build
| 02***00 | Engine, Short, Nat/Asp | 1 |
| 02***82 | Engine, Short | 1 |
P1-5-3 Fans, Pulleys, & Fan Belt, Ak Builds, 1.06 : 1 Fan Speed
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***52 | Fan, Alternator | 1 |
P1-3-1 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-4-3 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 1 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 0 |
P1-2-5 Engine, Long, Ak Build, 92bhp
| 02***37 | Engine Short | 1 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Ak Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-1-2 Engine, Complete, Ak Build
| 01***00 | Engine, Complete 1004-4t, Turbocharged, 80bhp | 1 |
P1-5-4 Fans, Pulleys, & Fan Belt, Air Conditioning, Ak Build, 1.06 : 1
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 12***01 | Bracket, Engine Mounting, Left Hand | 1 |
P1-2-4 Engine, Long, Ak Build, 80bhp
| 02***37 | Engine Short | 1 |
P1-7-1 Flywheel, & Starter Ring Gear, Ar & Ak Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
P1-3-3 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-2 Engine, Short, Ak Build
| 02***60 | Engine, Short, Turbo | 1 |
P1-2-3 Engine, Long, Ar Build, 75 Bhp
| 02***41 | Motor, Long | 1 |
P1-6-3 Timing Case, Camshaft & Gears, Ak Build 92 Bhp
| 02***38 | Key | 1 |
| 02***95 | Plug, Taper | 1 |
| 02***35 | Seal, Front Oil | 1 |
P1-7-2 Flywheel, & Starter Ring Gear, Ak Build
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***25 | Washer | 6 |
P1-5-2 Fans, Pulleys, & Fan Belt, Air Conditioning, Ar & Ak Builds, 0.85 : 1
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-6-2 Timing Case, Camshaft & Gears, Ak Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-1-3 Engine, Complete, Ak Build
| 01***07 | Engine, Complete 1004-4t, Turbocharged, 92bhp | 1 |
| 01***10 | Engine, Complete, 1004-4t, Turbocharged, 92bhp | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt, Ar & Ak Builds, 0.85 : 1 Fan Speed
| 01***01 | Pulley, Alternator, D=70mm Single Groove | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Ar Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-2-3 Rocker Assembly, Push Rods & Tappets, Ar Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Ak Builds
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-4-1 Lifting Plates, Engine, Ar & Ak Builds
| 02***31 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-3-2 Rocker Cover, Policeman Breather, Ar & Ak Builds
| 02***69 | Bush | 3 |
| 02***59 | Bracket | 1 |
| 02***94 | O Ring | 1 |
P2-1-2 Cylinder Head, Ak Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P2-1-1 Cylinder Head, Ar Build
| 02***21 | Bolt, Cylinder Head | 4 |
| 02***48 | Plug | 1 |
| 02***96 | Plug, Core, D=32mm | 1 |
P2-3-1 Rocker Cover, Ar & Ak Builds
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
| 02***59 | Bracket | 1 |
P3-3-3 Filter, Pre-Cleaner, Optional
| 32***00 | Filter, Pre-Cleaner | 1 |
| 32***01 | Cover, Assembly | 1 |
| 32***02 | Bowl | 1 |
P3-4-3 Silencer & Extension, Naturally Aspirated, Ar Build
| 02***16 | Screw | 1 |
| 12***57 | Pipe, Exhaust Extension, I/D=78mm | 1 |
| 12***68 | Silencer, Exhaust, Nat/Asp | 1 |
P3-3-1 Filter, Air, Naturally Aspirated, Ar Build
| 12***38 | Plate, Tower | 1 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
P3-2-1 Manifold, Exhaust, Ar Build
| 02***36 | Gasket, Ind/Exhst Manifold | 1 |
| 02***37 | Manifold, Exhaust | 1 |
| 02***02 | Stud | 3 |
P3-4-1 Silencer & Extension, Naturally Aspirated, Ar Build
| 02***02 | Stud | 3 |
| 02***61 | Nut | 3 |
| 12***26 | Strip, Clamping | 1 |
P3-4-4 Silencer & Extension, Turbocharged, Ak Build
| 02***02 | Stud | 3 |
| 02***16 | Screw | 1 |
| 02***61 | Nut | 3 |
P3-1-1 Manifold, Induction, Ar Build
| 02***36 | Gasket | 1 |
| 02***37 | Connector, Air Inlet | 1 |
| 02***39 | Plate | 1 |
P3-3-2 Filter, Air, Turbocharged, Ak Build
| 12***38 | Plate, Tower | 1 |
| 13***1Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
P3-1-3 Manifold, Induction, Ar Build
| 02***10 | Plug | 1 |
| 02***36 | Gasket | 3 |
| 02***37 | Connector, Air Inlet | 1 |
P3-1-2 Manifold, Induction, Ak Build
| 02***89 | Hose, Induction | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***54 | Elbow, Air Induction | 1 |
P3-2-2 Manifold, Exhaust, Ak Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***85 | Manifold, Exhaust | 1 |
P3-4-2 Silencer & Extension, Turbocharged, Ak Build
| 12***57 | Pipe, Exhaust Extension, I/D=78mm | 1 |
| 12***43 | Silencer, Exhaust | 1 |
| 12***49 | Bracket, Exhaust Mounting, Lower Rear | 1 |
P4-4-1 Radiator & Hoses, With 4 Row Oil Cooler
| 12***65 | Clip | 1 |
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
P4-1-1 Pump, Water, Ar & Ak Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
| 02***10 | Pump, Water | 1 |
P4-4-2 Radiator & Hoses, With 5 Row Oil Cooler
| 12***65 | Clip | 1 |
| 12***05 | Spacer | 2 |
| 12***78 | Cap, Pressure 0.5bar | 1 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Ar Build
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-2-2 Thermostat, Housing, Inlet & Outlet, Ar & Ak Builds
| 02***95 | Plug, Taper | 1 |
| 02***34 | Gasket, Ind/Exhst Manifolds | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-3-1 Radiator, Fittings & Mountings
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***69 | Guard, Cooling Fan, Left Hand | 1 |
P4-3-2 Radiator, Fittings & Mountings, Air Conditioning Builds
| 12***98 | Cowling, Fan 21", 2ws | 1 |
| 12***01 | Bracket, Radiator Mounting | 2 |
| 12***68 | Guard, Cooling Fan, Left Hand | 1 |
P5-1-1 Sump, Oil, & Fittings, Ar & Ak Builds
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 2 |
P5-5-1 Cooler, Oil, Filter & Pipework, Ar Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Ak Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-3-1 Piston Cooling Jets, Ak Build
| 02***98 | Valve | 4 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P5-2-1 Pump, Oil, & Relief Valve, Ar Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-2-4 Pump, Oil, & Relief Valve, Ak Build,92bhp
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-4-1 Filter, Oil, & Oil Feed Adapter, Ar Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***54 | Adapter | 1 |
| 02***84 | Gasket | 2 |
P5-5-2 Cooler, Oil, Filter & Pipework, Ak Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***18 | Spacer | 2 |
| 02***05 | Seal | 1 |
P5-5-4 Cooler, Oil, Hose & Pipework, Ak Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 2 |
| 02***57 | Adapter | 1 |
| 02***05 | Seal | 1 |
P5-2-3 Pump, Oil, & Relief Valve, Ak Build
| 02***19 | Thimble | 1 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P6-8-2 Pump, Fuel Lift
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
| 17***00 | Pump, Fuel Lift | 1 |
P6-1-3 Pump, Fuel Injection, Ak Build 92bhp
| 02***63 | Bracket, Support | 1 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-1-2 Pump, Fuel Injection, Ak Build 80bhp
| 02***63 | Bracket, Support | 1 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Ar Build
| 02***59 | Adapter, Union | 2 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-3-1 Fuel Pipes, Injection Pump, Ar Build
| 02***64 | Olive | 4 |
| 02***05 | Pipe, Fuel, F/Filter To Inj/Pump | 1 |
| 02***45 | Pipe, Fuel, Inj/Pump To F/Filter | 1 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-1-1 Pump, Fuel Injection, Ar Build
| 02***63 | Bracket, Support | 3 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-3-2 Fuel Pipes, Injection Pump, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 4 |
P6-2-2 Injectors, Fuel, & Injection Pipes, Ak Build
| 02***59 | Adapter, Union | 1 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-4-1 Fuel Pipes, Fuel Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 2 |
P6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P6-6-2 Filter, Fuel Sediment
| 32***07 | Washer, Locking | 1 |
| 32***08 | Seal | 1 |
| 32***09 | Bowl, Assembly | 1 |
P6-5-2 Fuel Heater, & Fuel Feed Pipe, Ak Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P7-7-1 Block Heater, Freeze Plug Type, Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
P7-4-1 Pump, Vacuum
| 15***00 | Pump, Vacuum | 1 |
| 15***01 | Housing | 1 |
| 15***02 | Valve, Body | 1 |
P7-5-1 Compressor 12.Volt, Air Conditioning
| 12***37 | Valve, Pressure | 1 |
| 12***41 | Shim | 0 |
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
P7-7-3 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***7Z | Bolt | 1 |
P7-8-1 Cold Start, Ether
| 12***09 | Block, Or Fitting | 1 |
| 12***10 | Clamp | 1 |
| 12***11 | Canister, Fluid | 1 |
P7-1-2 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***71 | Housing, Compressor | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
P7-1-1 Turbocharger, Ak Build
| 02***51 | Housing, Centre, Assembly | 1 |
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-2-1 Turbocharger, Pipework & Mounting, Ak Build
| 02***85 | Clip | 1 |
| 02***75 | Gasket | 1 |
| 02***16 | Adapter, Union | 1 |
P7-7-2 Heater, Engine Block
| 12***47 | Clip, Cable | 1 |
| 12***46 | Bracket, Mounting | 1 |
| 13***3Z | Screw, M6x16 | 2 |
P7-4-2 Pump, Vacuum
| 15***05 | Spring, Inner | 1 |
| 15***10 | Washer, Spring | 1 |
| 15***11 | Bearing | 2 |
P7-1-3 Turbocharger, Ak Build
| 02***84 | Gasket, Turbo To Manifold | 1 |
| 02***72 | Housing, Centre, Assembly | 1 |
| 02***74 | Kit-Sundry Parts | 1 |
P7-3-1 Pump, Vacuum, & Installation
| 13***07 | Capscrew | 2 |
| 14***01 | Washer, Aluminium | 1 |
| 14***11 | Seal, Bonded | 1 |
P8-1-1 Gasket Set, Top, Ar Build
| 02***50 | Kit-Gasket, Top | 1 |
P8-1-3 Gasket Set, Top, Ak Build
| 02***49 | Kit-Gasket, Top | 1 |
P8-1-2 Gasket Set, Top, Ak Build
| 02***14 | Kit-Gasket, Top | 1 |
P8-2-2 Gasket Set, Bottom, Ak Build
| 02***41 | Kit-Gasket, Bottom | 1 |
P8-2-1 Gasket Set, Bottom, Ar & Ak Builds
| 02***51 | Kit-Gasket, Bottom | 1 |
214e serial number reference
The machine identification plate is mounted on the loader tower. The serial numbers of the machine and its major units are stamped on this plate. Verify applicability with a JCB dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 0907001 - 0912555 | Applicable to Outrigger, Swing, Boom, Dipper, Loader Lift, Loader Bucket Tilt, Loader Clam, and Steering cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 0960000 - 0989999 | Applicable to Outrigger, Swing, Boom, Dipper, Loader Bucket Tilt, and Loader Clam cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 1327000 - 1348036 | Applicable to Outrigger cylinder seal kit. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 1327000 - 1349999 | Applicable to Swing, Boom, Dipper, Loader Lift, Loader Bucket Tilt, and Loader Clam cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 1616000 - 1621599 | Applicable to Boom, Dipper, Loader Lift, Loader Bucket Tilt, and Loader Clam cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 1705500 - 1709999 | Applicable to Boom, Dipper, Loader Lift, Loader Bucket Tilt, and Loader Clam cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 2000000 - 2019999 | Applicable to Boom, Dipper, Loader Lift, Loader Bucket Tilt, and Loader Clam cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 2098876 - 2113875 | Applicable to Boom, Dipper, Loader Lift, Loader Bucket Tilt, and Loader Clam cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| 2254521 - 2274521 | Applicable to Boom, Dipper, and Loader Lift cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
| M430000 - Up | Applicable to Backhoe Dipper Extension and Steering cylinder seal kits. | Confirmed by HW Part Store product listings for JCB 214E seal kits. |
Frequently asked questions
What engine does the JCB 214e use?
The JCB 214e uses a Perkins 1000 Series four-cylinder, direct-injection diesel engine with 4.25 liters displacement, producing 72 SAE net horsepower.
What is the operating weight of the JCB 214e?
Operating weights vary by configuration: 5,919 kg (13,046 lb) for the 2WD base unit, 6,069 kg (13,376 lb) for the 4WD base unit, 6,519 kg (14,368 lb) for the 2WD cab version, and 6,669 kg (14,698 lb) for the 4WD cab version.
What model replaced the JCB 214e?
The JCB 214e was succeeded by the JCB 216 and 220 models in the backhoe loader lineup.
What 214e owners discuss
What are the common powertrain and hydraulic behaviors reported for the JCB 214e?
Users report intermittent engine shutdowns and random ignition switch power loss during operation. A common hydraulic issue is front-end bleed-off when in 'hoeing stance' with stabilizers down, losing pressure in 5-10 seconds. Transmission issues include loss of forward/reverse movement after warming up, often linked to low transmission oil levels or solenoid failures.
What undercarriage or wear patterns are typical for this machine type?
The JCB 214e is described as 'tippy' and 'cheaply built' by some operators, with reports of near-tipovers during backhoe operation. The machine features a one-piece mainframe and heavy-duty rear frame supports. Wear patterns include rapid loss of hydraulic pressure in stabilizers and potential leakage from loader lift cylinder seals, particularly in serial ranges the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, and the OEM part reference-the OEM part reference.
What are the engine quirks per series for the JCB 214e?
The JCB 214e uses a Perkins 4-cylinder turbo diesel engine (specifically the 1004 Series). A known quirk is that a faulty EOS (Engine Oil Solenoid) switch can cause fuel flooding, hard starting, and black smoke emissions. The engine may also experience intermittent power loss with hydraulic bogging, often pointing to turbocharger inefficiency or clogged air filters.
What are common electrical/sensor issues?
A frequent electrical issue is the blowing of the 10A fuse (#5a) which feeds the forward/reverse solenoids, relays, and start circuit. This is often caused by chafed wires in the forward/reverse stalk wiring harness where wires rub together. Other issues include loss of power to the ignition switch due to bad connections at the starter solenoid or fuse panel, and low transmission oil warning lights triggering prematurely or failing to clear.
What should be checked when buying a used 214e?
Check the forward/reverse stalk wiring harness for chafed or twisted wires that could cause short circuits. Verify the transmission fluid level and condition, as low oil can cause loss of movement. Test the hydraulic stabilizers for rapid pressure bleed-off. Inspect the EOS solenoid switch for signs of fuel flooding or hard starting. Check for front-end lift cylinder seal leaks, especially if the machine serial number falls within the ranges: the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, the OEM part reference-the OEM part reference, or the OEM part reference-the OEM part reference.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 214e part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.