JCBconstructionbackhoe loader 2cx, 210, 212, midi cx
Jcb 210S LE
Maintenance schedule, common problems & OEM parts breakdown
The JCB 210S is a mid-size backhoe loader manufactured from 1997 to 2004. It is powered by a 60 hp (45 kW) 4-cylinder turbo diesel engine and has an operating weight of approximately 10,196 lb (4,626 kg). The machine features a 9.8 ft (3.0 m) max digging depth and an 8.5 ft (2.6 m) loading height. Configurations include standard and SL (Long Reach) variants with ROPS cabs. The 210S succeeded the 210 model and was followed by the 214S and 216S series. It was marketed in North America as the 210S and in Europe as the 2CX.
The 210S remains relevant in the used market due to its simple, non-DEF engine design and long 500-hour oil change intervals, which reduce downtime compared to competitors. Its compact size and 4.88 m transport length allow for easy trailer transport. The machine's hydraulic system and undercarriage are widely supported by aftermarket parts suppliers. The SL variant offers extended reach for deeper trenching, appealing to utility contractors. The 210S is often compared to the John Deere 310 and CAT 416 for its balance of power and maneuverability in confined spaces.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 210S LE specifications
Engine
| Model | JCB Diesel by Kohler |
| Gross/Net Power | 60 hp (45 kW) net |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 10,196 lb (4,626 kg) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 4.88 m (16.0 ft) |
| Transport Width | 1.85 m (6.1 ft) |
| Transport Height | 2.55 m (8.4 ft) |
| Wheelbase / Track Gauge | Not documented for this exact serial range — verify with your dealer |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Other Class-Relevant Dimensions | Max Digging Depth: 3.65 m (12.0 ft); Max Discharge Height: 4.41 m (14.5 ft) |
Performance
| Travel Speeds | 31.4 km/h (19.5 mph) forward |
| Class-Relevant Performance Figures | Loader Breakout Force: 38.7 kN (8,706 lbf); Loader Lift Capacity: 2,200 kg (4,850 lb); Backhoe Digging Depth: 3.65 m (12.0 ft) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service Capacities (Summary)
| Fuel Tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
210S LE fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| engine crankcase (with filter) | 11.1 L (2.5 UK gal) | JCB 15W/40 Multigrade (climate: -10 C to 50 C / 14 F to 122 F) |
| fuel tank | 83.2 L (18.3 UK gal) | Diesel Oil |
| hydraulic system AND tank | not documented | zinc-free hydraulic oil |
| grease (spec only) | not applicable | JCB Super Universal Agricultural (climate: -15 C to 30 C / 5 F to 86 F) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 210S LE maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 210S LE beyond the schedule
Predictive Maintenance & Fluid Analysis
Take oil samples at the 500-hour interval from the engine, hydraulic tank, and axle housings to establish a baseline. Monitor hydraulic oil for zinc depletion and contamination. Check the hydraulic return filter magnet for metallic debris during every 500-hour service. Inspect the air filter restriction indicator regularly; replace elements when the indicator signals. Verify coolant concentration annually to prevent corrosion in the aluminum engine block. Track fuel filter replacement intervals to protect the common-rail injectors from water and particulate contamination.
Corrective & Common Repairs
Address hydraulic hose chafing at the kingpost and boom pivot points, which are common failure sites. Replace worn stabilizer leg wear pads to prevent chassis damage. Inspect the Smooth Ride System (SRS) accumulator for nitrogen pressure loss if loader operation feels harsh. Check the priority valve and steer mode valve for leaks if steering becomes sluggish. Replace cracked cylinder rods or scored wiper seals to prevent hydraulic fluid loss. Inspect the torque converter for slippage or overheating during heavy loader work.
Overhaul & Rebuild Points
Perform structural inspections of the chassis, side frames, and boom for cracks or unauthorized welding at the 2000-hour interval. Measure swing ring play if equipped with a swing attachment. Check brake disc wear and immersed brake condition for safe operation. Inspect the turbocharger shaft play and wastegate function for power loss. Replace injector spray patterns if diagnostics indicate poor atomization. Check the slew ring bolts for proper torque on compatible configurations.
Seasonal & Environment Servicing
Use JCB Super Universal Agricultural fluid or HP46 hydraulic oil in temperatures between -15°C and 30°C. Switch to JCB Hydraulic Fluid 68 for temperatures above 30°C. Use JCB 15W/40 Multigrade engine oil for temperatures between -10°C and 50°C. In cold weather, use a block heater and ensure the fuel system is free of water. Check the windscreen washer fluid for de-icing properties. Inspect the cab heater filter and A/C condenser for debris before summer operation.
210S LE common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32/912001 | Element, Fuel Filter, Canister Type | Fuel system service | Check fitment → |
| 02/201705 | Pipe, Fuel, F/Filter To Inj/Pump | Fuel system service | Check fitment → |
| 02/201845 | Pipe, Fuel, Inj/Pump To F/Filter | Fuel system service | Check fitment → |
| 32/905002 | Element, Air Safety | Air intake service | Check fitment → |
| 32/909101 | Element, Air, Main | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
210S LE fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Fuel supply restriction, leaking injector, or faulty pressure sensor | Check fuel filter and lines for blockage; verify sensor wiring and connector integrity |
| P0100 | Mass Air Flow (MAF) circuit malfunction | Dirty or faulty MAF sensor, intake air leak, or wiring fault | Inspect intake tract for leaks; clean or replace MAF sensor; check harness continuity |
| P0102 | MAF sensor low voltage input | MAF sensor short to ground, open circuit, or low air flow | Check MAF sensor power and ground; inspect wiring for damage; verify air filter condition |
| P0103 | MAF sensor high voltage input | MAF sensor short to battery, open circuit, or excessive air flow | Check MAF sensor wiring for short to power; inspect for vacuum leaks in intake system |
| P0112 | Intake air temperature sensor low voltage | IAT sensor short to ground, open circuit, or sensor failure | Check IAT sensor connector and wiring; replace sensor if circuit is intact |
| P0335 | Crankshaft position sensor 'A' circuit no signal | Faulty crank sensor, damaged tone ring, or open wiring | Inspect crank sensor wiring and connector; check sensor gap and tone ring for damage |
| P0336 | Crankshaft position sensor circuit range/performance | Damaged crank sensor, misaligned tone ring, or signal noise | Verify sensor mounting and gap; inspect wiring for interference; replace sensor if necessary |
| P0340 | Camshaft position sensor circuit malfunction | Faulty cam sensor, wiring issue, or timing chain/belt problem | Check cam sensor wiring and connector; verify engine timing alignment |
| P029B | Injector drift fault detection on Injector 2 | Worn or faulty injector 2, or high-pressure fuel leak | Swap injector 2 with another cylinder to isolate; check high-pressure lines for leaks |
| P0321 | CAN bus message error for engine speed | CAN bus communication fault, ECU issue, or wiring short/open | Inspect CAN bus wiring for damage or corrosion; check ECU connections and power supply |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
210S LE attachments & work tools
Loader Bucket
Standard shovel and general-purpose buckets are supplied with the machine. The 210S backhoe loader variant typically includes a 92-inch (2.34 m) GP loader bucket as standard equipment on newer units, while older 1997–2004 models list a 0.06 m³ (0.08 yd³) bucket capacity. Bucket width for the standard 210S is 1.22 m (48 in).
Backhoe Bucket
The rear backhoe assembly includes a standard 24-inch (0.61 m) excavator bucket. The boom and stick reach a maximum dredging depth of 3.65 m (12 ft). The backhoe features a 14 ft 169 in (4.3 m) center pivot boom with anti-drift hydraulics.
Quick Hitch / Coupler
The machine is equipped with a standard-fit mechanical quick hitch featuring a universal face plate. An optional electric quick hitch is available, allowing the operator to lock and unlock attachments from the cab. A Wain Roy XLS hydraulic swing coupler system is also available as an option, providing 45-degree rotation.
Hydraulic Flow / Coupling
A high-flow package is available, including a 7-way multi-function joystick and a 14-pin connector to operate diverse attachments. Standard flow machines may require the high-flow option for certain tools. The system uses zinc-free hydraulic oil to protect components.
Skid Steer Adapter
Aftermarket adapters convert the JCB 210S standard mount to SAE Skid Steer hitch, allowing use of forks, bale huggers, tree shears, and grapples. These adapters use heavy-duty 3/8-inch (9.5 mm) latch box sides and 1-inch (25 mm) hook plates. The adapter couples the two quick hitches to maintain lifting capacity.
Rear Mount / 3-Point
The rear backhoe frame serves as the mounting point for rear implements. Users have mounted 3-point adapters to the skid steer adapter plate to utilize rear-mounted tools like disk harrows and box blades. The backhoe stick and boom include transport locks.
Cab / Operator Protection
The machine features a ROPS cabin with large windows for visibility. Optional equipment includes an enclosed cab with heat and air conditioning, block heater, and work lights. The Smoothride System (SRS) is available as an option to improve load retention and operator comfort.
All 210S LE assemblies by section
Every catalogued assembly group for the Jcb 210S LE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-3-2 Shovel, Clam, 1372mm Wide
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-5-1 Guard, Tooth
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***00 | Guard, Tooth, 1850mm | 1 |
A1-2-1 Shovel, 1372mm (4'6") Wide
| 14***76 | Toeplate | 1 |
| 14***77 | Sidecutter | 2 |
| 52***00 | Shovel, G.P. 1372mm Wide, Direct Mount | 1 |
A1-6-2 Toeplate, Bolt On, 1950mm
| 13***1Z | Nut | 7 |
| 14***17 | Toeplate, 1950mm, 7 Holes | 1 |
| 14***2Z | Washer | 7 |
A1-2-3 Shovel, 1950mm Wide
| 13***01 | Nut | 14 |
| 14***93 | Toeplate, 1950mm | 1 |
| 52***00 | Shovel, G.P. 1950mm Wide, Direct Mount | 1 |
A1-1-2 Shovel, 1950mm Wide
| 13***01 | Nut | 14 |
| 14***93 | Toeplate, 1950mm | 1 |
| 52***00 | Shovel, G.P. 1950mm Wide, Quickhitch Mount | 1 |
A1-1-1 Shovel, 1850mm (6'0") Wide
| 13***01 | Nut | 12 |
| 14***72 | Toeplate, 1850mm | 1 |
| 52***00 | Shovel, G.P. 1850mm Wide, Quickhitch Mount | 1 |
A1-6-1 Toeplate, Bolt On, 1850mm
| 13***1Z | Nut | 7 |
| 14***04 | Toeplate, 1850mm | 1 |
| 14***2Z | Washer | 7 |
A1-2-2 Shovel, 1850mm (6'0") Wide
| 13***01 | Nut | 12 |
| 14***72 | Toeplate, 1850mm | 1 |
| 52***00 | Shovel, G.P. 1850mm Wide, Direct Mount | 1 |
A1-3-3 Shovel, Clam, 1850mm (6'0") Wide
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
A1-3-1 Shovel, Clam, 1850mm (6'0") Wide
| 12***01 | Bush | 4 |
| 13***4Z | Bolt | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 2 |
A2-2-1 Bucket, 230mm (9")
| 13***01 | Nut | 4 |
| 53***52 | Toeplate, 230mm (9") | 1 |
| 53***54 | Sidecutter, Right Hand | 1 |
A2-1-1 Bucket, Standard
| 13***01 | Nut | 10 |
| 14***30 | Toeplate, 300mm | 1 |
| 14***31 | Toeplate, 350mm | 1 |
A2-3-1 Bucket, Grading
| 13***1Z | Nut | 5 |
| 14***1Z | Washer, Spring | 5 |
| 53***01 | Toeplate, Weld On | 1 |
A2-5-1 Bucket, Square Hole, Quickhitch Mount
| 13***4Z | Bolt | 2 |
| 13***01 | Nut | 12 |
| 53***05 | Tooth | 3 |
A2-4-1 Buckets, High Capacity
| 98***01 | Tooth, Tip-Forged | 0 |
| 98***03 | Pin, Flex | 0 |
| 98***00 | Bucket, High Capacity, 24" | 1 |
A3-11-1 Shovel, Right Hand Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 45***00 | Coupling, 3/8" Bsp Male, Quick Release; Replaced By 45/91***00, See San04893 | 1 |
A3-8-2 Earth Drill Jcb 1200, Attachments, Heavy Duty
| 98***04 | Bit, Earth Drill, 12" Heavy Duty | 1 |
| 98***05 | Bit, 18" Earth Drill, Heavy Duty | 1 |
| 98***06 | Bit, 24" Earth Drill, Heavy Duty | 1 |
A3-9-1 Quickhitch, Attachment, Backhoe
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***8Z | Bolt, M8x80mm Long | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
A3-8-3 Earth Drill Jcb 1200, Attachments, Light Duty
| 98***97 | Bit, 6" Earth Drill, Light Duty | 1 |
| 98***98 | Bit, 9" Earth Drill, Light Duty | 1 |
| 98***99 | Bit, 12" Earth Drill, Light Duty | 1 |
A3-22-1 Weight Tray Assembly, Rear
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Counterweight, 40kg | 16 |
A3-7-2 Earth Drill Jcb 1200, Quick Hitch Mounted, Front
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***03 | Adapter | 2 |
A3-13-1 Sweeper, 2134mm (7ft)
| 13***7Z | Bolt, M10x25 | 14 |
| 13***0Z | Bolt | 4 |
| 13***1Z | Nut | 16 |
A3-1-1 Quickhitch
| 13***7Z | Screw, M6 X 25mm Long | 5 |
| 13***21 | Bolt | 2 |
| 13***3Z | Nut, M16 | 2 |
A3-14-2 Shovel, Side Tip, Direct Mount
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-24-1 Lower Links, Claw Type Category 2
| 14***15 | Ball, Lower Link | 2 |
| 14***00 | Link, Claw Assembly, L.H. Lower | 1 |
| 14***00 | Link, Claw Assembly, R.H.Lower | 1 |
A3-14-1 Shovel, Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***03 | Adapter | 4 |
| 45***00 | Coupling, 3/8" Bsp Female, Quick Release | 1 |
A3-6-1 Bracket, Bucket Stowage
| 13***8Z | Bolt, M10 X 30 | 2 |
| 14***00 | Pin, Pivot | 1 |
| 14***00 | Bracket, Hanger | 1 |
A3-12-6 Frame, Q/Hitch, 7' Sweeper Collector
| 13***4Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***24 | Washer, Bonded | 4 |
A3-12-5 Sweeper Collector, Sprinkler Assembly, Beta 7' & Beta 8'
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***3Z | Bolt, M12x130 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 12 |
A3-20-1 Hitch Assembly, Rear, Jcb
| 12***02 | Bush | 2 |
| 12***11 | Bush | 2 |
| 12***22 | Bush, Steel | 2 |
A3-7-1 Earth Drill
| 13***0Z | Bolt | 4 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, M16 | 10 |
A3-7-3 Earth Drill Jcb 1200, Components
| 98***90 | Kit, Power Head | 1 |
| 98***74 | Sprocket | 1 |
| 98***75 | Chain, Drive | 1 |
A3-21-1 Drawbar
| 13***2Z | Setscrew | 2 |
| 13***2Z | Bolt, M16 X 120 | 2 |
| 13***1Z | Bolt, M24x110; Replaces 60***21 San11383, S/S Cancelled San 13642 (1315/ Wrong Grade) | 2 |
A3-12-1 Sweeper Collector
| 13***8Z | Screw, M6 X 30mm Long | 4 |
| 13***3Z | Screw, M8 X 16 | 14 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 18 |
A3-26-1 Tilt And Pitch, Control Manual
| 14***49 | Rod, Eye End, L.H.Thread | 2 |
| 14***51 | Tube, Centre, Top Link | 1 |
| 14***52 | Bar, Tommy | 2 |
A3-2-1 Fork Frames & Forks, Industrial
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***3Z | Nut, M16 | 2 |
| 52***00 | Frame, Fork | 1 |
A3-12-3 Sweeper Collector, Hydraulic Circuit
| 14***11 | Seal, Bonded | 7 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 6 |
A3-25-1 Top Link Turnbuckle, Claw Type Category 2
| 14***31 | Link, Hook End Top | 1 |
| 14***49 | Rod, Eye End, L.H.Thread | 1 |
| 14***50 | Collar, Locking | 1 |
A3-13-4 Sweeper, Mounting Frame
| 98***24 | Frame, Mounting | 1 |
A3-12-4 Sweeper Collector, Mounting Frame
| 13***3Z | Bolt, M12x130 | 2 |
| 13***3Z | Nut, M12 | 2 |
| 14***9Z | Washer | 2 |
A3-24-2 Lower Links, Ball Type Category 1
| 14***99 | Bush, Top Link; See Note 1. Fit Bush Item 1 To Pitch Control Ram Or Turnbuckle When Using Category 1 Type Power Links, Bush, Top Link | 1 |
| 14***00 | Arm, Lift, Right Hand | 1 |
| 14***00 | Arm, Lift, Left Hand | 1 |
A3-27-1 Tilt And Pitch, Control Hydraulic
| 90***00 | Ram, Hydraulic, Pitch | 1 |
| 90***00 | Ram, Hydraulic,Tilt | 1 |
| 90***56 | Rod, Piston | 1 |
A3-12-2 Sweeper Collector, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-3-1 Breaker, Hammermaster 260l
| 13***9Z | Bolt | 4 |
| 13***2Z | Bolt, M24 X 240mm | 4 |
| 13***1Z | Nut, M24 | 4 |
A3-8-1 Earth Drill, Attachments
| 13***4Z | Bolt | 3 |
| 13***4Z | Bolt, M16x60 | 6 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
A3-13-3 Sweeper, Hydraulic Circuit
| 14***15 | Washer, Seal; Replaces Khj0891 | 4 |
| 16***04 | Adapter, Male/Male | 2 |
| 16***07 | Adapter | 2 |
A3-23-1 Pick-Up Hitch, Hydraulic
| 13***7Z | Bolt | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
| 13***2Z | Nut | 1 |
A3-13-2 Sweeper, Drive/Brush Assembly
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***9Z | Screw, M10x35mm | 8 |
A3-10-1 Shovel, Left Hand Side Tip
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 16***07 | Adapter | 2 |
| 33***31 | Circlip | 2 |
B Bodywork, Cab, Loader End
B1-17-2 Bracket, Coupler Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Nut, M8 | 3 |
| 14***04 | Bracket, Support; Replaced By 33***08 San10720 | 1 |
B1-4-1 Tank, Hydraulic
| 12***77 | Cover | 1 |
| 13***5Z | Bolt | 14 |
| 13***0Z | Bolt, M12x40 | 4 |
B1-11-1 Tow Hitch, Hydraulic
| 13***4Z | Bolt, M6 X 60 | 1 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 1 |
B1-5-2 Bonnet, Sidepanels &, Front Grille
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt | 1 |
B1-9-2 Counterweight, Airmaster
| 13***0Z | Bolt | 2 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
B1-9-1 Counterweight, Rear
| 13***0Z | Bolt, M10 X 100 | 4 |
| 13***5Z | Bolt | 2 |
| 13***1Z | Bolt | 2 |
B1-15-1 Restraints, Loader And Excavator, Uk
| 14***63 | Strap, Retaining, Loader End | 1 |
| 14***64 | Strap, Retaining, Excavator End | 1 |
B1-10-1 Soundproofing, Standard
| 14***23 | Panel, Soundproofing | 1 |
| 14***24 | Panel, Soundproofing,L.Side | 1 |
| 14***25 | Panel, Soundproofing,R.Side | 1 |
B1-12-1 Mountings, Rear Lights
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 14***00 | Bracket, Light Mounting, Left Side | 1 |
| 14***00 | Bracket, Light Mounting, Right Side | 1 |
B1-2-3 Frame, Rear, 12'0" Dig Depth
| 13***9Z | Screw, M10x35mm | 4 |
| 13***8Z | Screw | 8 |
| 13***9Z | Bolt, M10x90mm | 2 |
B1-10-2 Soundproofing, Standard
| 14***23 | Panel, Soundproofing | 1 |
| 14***24 | Panel, Soundproofing,L.Side | 1 |
| 14***25 | Panel, Soundproofing,R.Side | 1 |
B1-2-1 Frame, Rear
| 13***9Z | Screw, M10x35mm | 4 |
| 13***8Z | Screw | 8 |
| 13***9Z | Bolt, M10x90mm | 2 |
B1-7-1 Fenders, Rear
| 13***3Z | Screw, M6x16 | 12 |
| 14***1Z | Washer | 12 |
| 14***84 | Fender, Left Hand, Yellow | 1 |
B1-1-1 Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 55 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
B1-2-5 Street Pads, Hydrashuh Option
| 13***4Z | Bolt | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***75 | Pad, Pad; Optional For Most Countries. These Street Pads Are Only Suitable For The Feet As Shown. (Germany Mainly) | 2 |
B1-2-2 Frame, Rear, Japan
| 13***9Z | Screw, M10x35mm | 4 |
| 13***8Z | Screw | 8 |
| 13***9Z | Bolt, M10x90mm | 2 |
B1-16-1 Top Link Retainer
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***96 | Top, Link, Retainer | 2 |
B1-6-2 Battery Box & Step
| 12***95 | Step, Upper | 1 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***8Z | Bolt, M10 X 30 | 2 |
B1-8-1 Cover, Excavator Valve
| 13***5Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
| 14***17 | Cover, Valve | 1 |
B1-17-1 Bracket, Coupler Mounting
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***1Z | Nut, M8 | 3 |
| 14***58 | Bracket, Coupler Mounting; Replaced By 33***07 San10720 | 1 |
B1-1-25 Canopy
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***48 | Panel, Side, Lower Right Hand | 1 |
| 14***51 | Plate, Floor, Inspection | 1 |
B1-5-1 Bonnet, Sidepanels &, Front Grille
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt | 1 |
B1-7-2 Fenders, Front
| 13***9Z | Screw, M10x35mm | 12 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 13***4Z | Bolt, M12 X 60mm | 8 |
B1-14-1 Guard, Propshaft
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 14***00 | Guard, Propshaft | 1 |
| 14***9Z | Washer | 2 |
B1-2-4 Frame, Rear, Street Pads
| 13***4Z | Bolt, M12 X 60mm | 3 |
| 13***3Z | Nut, M12 | 3 |
| 14***9Z | Washer | 3 |
B1-1-2 Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 55 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
B1-3-1 Tank, Diesel Fuel, & Fittings
| 12***00 | Cap, Filler,Diesel Fuel | 1 |
| 13***3Z | Screw; Replaces 69***21 | 3 |
| 13***7Z | Screw, M6 X 25mm Long | 9 |
B1-13-1 Mountings, Rear Lights
| 13***3Z | Nut, Self Lock, M8 | 8 |
| 14***81 | Plate, Rear Light Mounting | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 8 |
B1-6-1 Battery Box
| 13***3Z | Screw, M6x16 | 1 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
B2-16-1 Covers, Vandal Resistant
| 12***21 | Padlock | 1 |
| 13***3Z | Screw, M6x16 | 1 |
| 13***4Z | Bolt, M6 X 60 | 1 |
B2-4-1 Window, Side, Opening
| 11***22 | Handle | 1 |
| 12***08 | Bush, Hinge | 2 |
| 13***3Z | Screw, M6x16 | 1 |
B2-9-2 Consoles
| 12***31 | Vent, Air Register | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 50 |
| 14***72 | Cover | 1 |
B2-1-1 Cab Assembly
| 12***00 | Pump, And Reservoir; Replaced By 25***00, See San07699, Single Pump Type. Refer To Page C3-3-1 For Machines Not Fitted With Non Return Valve At Base Of Bottle., Pump, And Reservoir; Replaced By 25***00, See San07699 | 1 |
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***3Z | Screw, M6x16 | 5 |
B2-14-1 Exterior Fittings, Cab & Rearframe, Japanese
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 4 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Screw, M8 X 16 | 1 |
B2-1-2 Cab Assembly
| 12***00 | Pump, And Reservoir; Replaced By 25***00, See San07699, Single Pump Type. Refer To Page C3-3-1 For Machines Not Fitted With Non Return Valve At Base Of Bottle., Pump, And Reservoir; Replaced By 25***00, See San07699 | 1 |
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***3Z | Screw, M6x16 | 5 |
B2-20-1 Visor, Sun
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 14***04 | Screw, Self Tapping | 2 |
| 25***01 | Blind, Sun Visor | 1 |
B2-1-30 Canopy, Glazing
| 82***54 | Upper, Left Side, 2 Piece Glass System; And Foot Note 1. When Fitting Service Replacement Cab/Canopy Use Only 1 Piece 1/4 Light Glass Items 2a,3a, Upper, Left Side, 2 Piece Glass System | 1 |
| 82***55 | Upper, Right Side, 2 Piece Glass System | 1 |
| 82***56 | Lower, Left Side, 2 Piece Glass System | 1 |
B2-7-1 Suspension Unit, Seat
| 19***01 | Unit, Suspension | 1 |
| 19***02 | Kit-Weight Adjuster | 1 |
| 19***03 | Kit-Height Adjuster | 1 |
B2-6-1 Seat Belt
| 40***00 | Kit-Seat Belt, With Inertia Reel, 42" Long; Buckle Strap Length 190mm. There Are No Servicable Parts For This Item, Kit-Seat Belt, With Inertia Reel, 42" Long | 1 |
B2-17-2 Floormats
| 14***95 | Mat, Cab Side | 1 |
| 14***20 | Floormat, Left | 1 |
| 14***21 | Floormat, Right | 1 |
B2-17-1 Floormats
| 14***95 | Mat, Cab Side | 1 |
| 14***20 | Floormat, Left | 1 |
| 14***21 | Floormat, Right | 1 |
B2-6-4 Seat, Pvc & Fabric, High Back
| 40***05 | Kit-Seat Frame | 1 |
| 40***05 | Kit, Back Foam | 1 |
| 40***01 | Handle; New Stronger Handle To Replace The Ones Curre, Ntly In Field Which Are Breaking San 07598 | 1 |
B2-6-2 Seat Belt, 3"
| 12***52 | Spacer | 2 |
| 13***0Z | Bolt, 7/16"Unfx1.1/2"Long | 2 |
| 13***3Z | Nut, Lock | 2 |
B2-1-15 Cab Shell
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***84 | Lining, Front Roof | 1 |
B2-1-21 Canopy, Complete
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***3Z | Screw, M6x16 | 5 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-1-25 Canopy
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***48 | Panel, Side, Lower Right Hand | 1 |
| 14***51 | Plate, Floor, Inspection | 1 |
B2-9-1 Consoles
| 12***31 | Vent, Air Register | 1 |
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt, M5 X 20mm Long | 50 |
B2-13-1 Mountings, Number Plates
| 14***11 | Bracket, Number Plate | 1 |
| 14***12 | Bracket, Number Plate | 1 |
| 14***84 | Bracket, Number Plate | 1 |
B2-5-1 Window, Rear Opening
| 12***09 | Cap, Nut M8; Replaces 69***72 | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 8 |
B2-18-1 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***09 | Adhesive, Jcb Ultrafast, 310ml Cartridge | 0 |
B2-16-2 Covers, Vandal Resistant
| 12***21 | Padlock | 1 |
| 12***39 | Catch | 1 |
| 14***25 | Plate, Spacer | 1 |
B2-10-1 Mirror, External & Interior
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Mirror, With Bracket | 2 |
| 12***01 | Bracket | 1 |
B2-1-26 Canopy
| 13***3Z | Screw, M8 X 16 | 1 |
| 14***48 | Panel, Side, Lower Right Hand | 1 |
| 14***51 | Plate, Floor, Inspection | 1 |
B2-1-20 Canopy, Complete
| 12***01 | Plate, Beacon Mounting | 1 |
| 13***3Z | Screw, M6x16 | 3 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
B2-8-1 Seat Pedestal
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
B2-6-3 Seat, Pvc & Fabric
| 40***03 | Kit-Backrest Foam | 1 |
| 40***06 | Seat, Frame Assembly | 1 |
| 40***00 | Seat, 'T6' Fabric; Nb 2 Numbers One Is Packaged And One Is Kit., A Kavanagh Kab Seating See San 20479. | 1 |
B2-2-10 Cab Glazing, Tinted, Direct Glazing
| 82***54 | Upper, Left Side, 2 Piece Glass System; And Foot Note 1. When Fitting Service Replacement Cab/Canopy Use Only 1 Piece 1/4 Light Glass Items 2a,3a, Upper, Left Side, 2 Piece Glass System | 1 |
| 82***55 | Upper, Right Side, 2 Piece Glass System | 1 |
| 82***56 | Lower, Left Side, 2 Piece Glass System | 1 |
B2-6-5 Seat, Suspension, 5000lb
| 12***98 | Pedestal, Seat; Replaced By 12***98, See San08817 | 1 |
| 13***2Z | Bolt, M10 X 1.5 X 50 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
B2-19-1 Carrier, First Aid Box
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***6Z | Washer, M6 | 2 |
| 14***6Z | Washer, Spring | 2 |
B2-12-1 Cab Mountings
| 13***1Z | Screw, M16 X 110 | 4 |
| 13***2Z | Bolt, M16 X 120 | 4 |
| 13***3Z | Nut, M16 | 4 |
B2-11-1 Covers, Harness'S
| 13***3Z | Screw; Replaces 69***21 | 8 |
| 14***13 | Plate, Cover | 1 |
| 14***23 | Bracket | 1 |
B2-1-10 Cab Shell
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***84 | Lining, Front Roof | 1 |
B2-3-1 Door
| 12***05 | Bolt, Closing | 1 |
| 12***08 | Bush, Hinge | 2 |
| 12***29 | Grommet | 1 |
B3-3-1 Shovel Ram Restraint, & Loader Ram Strut
| 12***00 | Strap | 2 |
| 12***02 | Stop | 2 |
| 14***95 | Strut, Travel | 1 |
B3-1-2 Arms, Loader
| 12***22 | Bush, Steel | 2 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M10x80 | 4 |
B3-1-1 Arms, Loader
| 12***22 | Bush, Steel | 2 |
| 13***5Z | Bolt | 4 |
| 13***8Z | Bolt, M10x80 | 6 |
B3-2-1 Safety Strut, Loader Arms
| 12***02 | Stop | 2 |
| 12***44 | Wire, Retaining, Safety Strut | 1 |
| 12***73 | Fastener, Anti-Luce | 1 |
B4-3-2 Boom, 12'0" Dig Depth
| 14***01 | Spacer | 1 |
| 14***02 | Spacer | 1 |
| 14***00 | Boom, Assembly, 12'0" Dig Depth | 1 |
B4-9-1 Safety Strut, Germany
| 12***00 | Strap | 1 |
| 12***02 | Stop | 2 |
| 14***00 | Bracket, Rear Light, German | 1 |
B4-1-0 Excavator End, Extending Dipper
| 14***26 | Shim, 0.5mm | 0 |
| 14***28 | Shim, 1.5mm | 0 |
| 14***18 | Spacer, 0.5mm | 0 |
B4-1-1 Pivot Pins, Excavator End, Standard Dipper
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
B4-4-1 Dipper
| 12***38 | Bush | 2 |
| 14***90 | Lever, Tipping; Cwe By 14***02 See San 12698 Division Eng., K.Willett Agreed Parts Interchangable. | 2 |
| 14***00 | Dipper | 1 |
B4-8-1 Safety Strut, Bucket Crowd Ram
| 12***02 | Stop | 2 |
| 14***57 | Strap | 1 |
| 14***00 | Strut, Travel, 654mm Long | 1 |
B4-2-2 Kingpost & Carriage, 12' Dig Depth
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***1Z | Bolt, M10 X 110 | 3 |
| 13***2Z | Bolt, M10 X 120 | 2 |
B4-5-1 Lock, Boom
| 13***7Z | Bolt | 1 |
| 14***04 | Chain | 2 |
| 14***00 | Pin, Locking | 1 |
B4-1-3 Pivot Pins, Excavator End, Extending Dipper
| 13***8Z | Bolt | 1 |
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
| 13***5Z | Bolt | 4 |
B4-3-1 Boom
| 14***01 | Spacer | 1 |
| 14***02 | Spacer | 1 |
| 14***00 | Boom, Assembly | 1 |
B4-4-3 Dipper (Stick), Extending
| 12***38 | Bush | 2 |
| 13***0Z | Bolt, M10 X 40 | 6 |
| 13***2Z | Nut, M12 | 8 |
B4-2-1 Kingpost & Carriage
| 13***8Z | Bolt, M12 X 30 | 4 |
| 13***1Z | Bolt, M10 X 110 | 3 |
| 13***2Z | Bolt, M10 X 120 | 2 |
B4-7-2 Tipping Link, Standard
| 12***07 | Bush | 2 |
| 12***38 | Bush | 1 |
| 14***00 | Link, Tipping | 1 |
B4-6-1 Slew Lock
| 13***9Z | Bolt, M12x90mm | 2 |
| 14***00 | Pin, Slew Lock | 1 |
| 14***55 | Chain | 1 |
B4-4-2 Dipper, 12'0" Dig Depth
| 12***38 | Bush | 2 |
| 14***90 | Lever, Tipping; Cwe By 14***02 See San 12698 Division Eng., K.Willett Agreed Parts Interchangable. | 2 |
| 14***00 | Dipper, Assembly, 12'0" Dig Depth | 1 |
B4-7-1 Tipping Link, With Lifting Shackle
| 12***07 | Bush | 2 |
| 12***38 | Bush | 1 |
| 14***00 | Link, Tipping,With Shackle | 1 |
B4-1-2 Pivot Pins, Excavator End, 12' Dig Depth
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt | 2 |
| 13***8Z | Bolt, M10x80 | 2 |
B5-1-3 Decals, Excavator, Jcb X Pattern
| 81***41 | Label, Backhoe | 1 |
| 81***42 | Label, Backhoe | 1 |
B5-1-6 Labels, German
| 81***01 | Label, No Passengers, German | 1 |
| 81***60 | Label, Hi-Lite | 1 |
| 81***88 | Label, Chevron, Left Hand, 380mm Long | 1 |
B5-1-2 Labels
| 81***50 | Label, Transmission Filler | 1 |
| 81***52 | Label, Drain Daily | 1 |
| 81***55 | Label, Diesel | 1 |
B5-1-4 Decals, Excavator, Jcb + Pattern
| 81***69 | Decal, Jcb + Pattern, R.H | 1 |
| 81***70 | Decal, Jcb + Pattern, L.H | 1 |
| 81***99 | Label, Iso Plus Pattern | 1 |
B5-1-11 Labels, Extradig 210s
| 81***05 | Decal, Extradig 210s, Right Side | 1 |
| 81***06 | Decal, Extradig 210s, Left Side | 1 |
B5-1-9 Labels, 210sl
| 81***56 | Decal, 210sl, Window | 2 |
| 81***58 | Decal, 210sl, Loader Arm | 2 |
B5-1-12 Labels
| 81***50 | Label, Transmission Filler | 1 |
| 81***52 | Label, Drain Daily | 1 |
| 81***55 | Label, Diesel | 1 |
B5-3-1 Tool Kit
| 14***58 | Key | 1 |
| 27***00 | Bag, Tool | 1 |
| 40***02 | Grease, Cartridge 400g | 1 |
B5-5-1 Paint
| 42***01 | Thinners, 1 Litre, 2-Pack | 0 |
| 42***40 | Paint, Gloss, 0.5 Litre, Two Pack Yellow | 0 |
| 42***43 | Paint, Gloss, 5 Litre, Two Pack Yellow | 0 |
B5-4-1 Fire Extinguisher, 2.5kg
| 15***81 | Extinguisher, Fire C/W Cradle; Replaces Jhh0058 Ref San09577, Replaced By 26***95 See San 10308 | 1 |
| 26***95 | Extinguisher, Fire C/W Cradle | 1 |
| 82***88 | Screw, Countersunk, M6 X 25 | 2 |
B5-1-16 Decals, 212su
| 81***19 | Decal, 212su | 1 |
| 81***32 | Label, Power Take-Off, Warning | 1 |
| 81***33 | Label, Power Take-Off, Warning | 1 |
B5-1-15 Decals, 210su
| 81***71 | Decal, 210su, Window, Yellow | 2 |
| 81***72 | Decal, 210su, Loader Arm, Black | 2 |
| 81***30 | Label, Warning, Loader | 1 |
B5-1-7 Labels
| 81***84 | Label, Warning, Boom Lock | 1 |
| 81***86 | Label, Warning, Swinging Boom; Replaced By 81***37 San 07623 | 1 |
| 81***91 | Label, Warning, Servicing | 2 |
B5-1-10 Labels, "Airmaster"
| 81***52 | Label, Drain Daily | 1 |
| 81***49 | Decal, Airmaster | 2 |
| 81***54 | Decal, Warning,Moving Parts | 3 |
B5-1-17 Decals, 2cxu
| 81***52 | Label, Power Take-Off Lever; Replaced By 81***20 San10720 | 1 |
| 81***32 | Label, Power Take-Off, Warning | 1 |
| 81***33 | Label, Power Take-Off, Warning | 1 |
B5-1-8 Labels
| 81***66 | Label, Cold Start, Instructions | 1 |
| 81***77 | Label, Read Handbook | 1 |
| 81***56 | Label, External Noise, 104lwa | 1 |
B5-1-1 Labels
| 81***50 | Label, Transmission Filler | 1 |
| 81***52 | Label, Drain Daily | 1 |
| 81***55 | Label, Diesel | 1 |
B5-1-5 Labels, 2cxl &'Streetmaster'
| 81***21 | Decal, Streetmaster | 2 |
| 81***22 | Decal, '2cxl' Right Side | 1 |
| 81***23 | Decal, '2cxl' Left Side | 1 |
B7-1-1 Airmaster, Compressor Assembly
| 13***5Z | Bolt, M5 X 20mm Long | 8 |
| 13***7Z | Screw, M6 X 25mm Long | 34 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
B7-2-1 Airmaster, Air/Hydraulic, Use In Conjunction With Ti 2/501
| 13***7Z | Bolt, M10x25 | 2 |
| 13***9Z | Bolt, M10x90mm | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
B7-13-1 Hitch, Tow 2.6t Capacity
| 13***4Z | Bolt, M16x60 | 2 |
| 13***0Z | Bolt, M20 X 100mm | 2 |
| 13***3Z | Nut, M16 | 2 |
B7-11-1 Airmaster, Speed Control, Installation
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
B7-8-1 Airmaster, Air/Oil Receiver
| 13***1Z | Bolt, M10 X 45mm | 4 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 2 |
| 14***18 | Dipstick, Assembly | 1 |
B7-12-1 Hitch Recovery, Manual
| 13***6Z | Bolt, M20 X 70 | 2 |
| 14***2Z | Washer, M20 | 2 |
| 15***00 | Pin | 1 |
B7-7-1 Airmaster, Oil Cooler
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
B7-10-1 Airmaster, Air Cleaner
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
| 14***7Z | Washer, Spring | 2 |
B7-5-1 Airmaster, Speed Control
| 13***1Z | Nut | 4 |
| 14***13 | Cylinder, Speed Control | 1 |
| 14***9Z | Washer | 6 |
B7-6-1 Airmaster, Blow Down Valve
| 13***1Z | Nut | 6 |
| 14***11 | Valve, Blowdown | 1 |
| 14***9Z | Washer | 6 |
B7-3-1 Airmaster, Compressor Unit
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***5Z | Bolt | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
B7-4-1 Airmaster, Suction Unloader
| 14***10 | Gasket | 1 |
| 14***00 | Valve, Unloader Assembly | 1 |
| 99***00 | Kit, Seal/Repair | 1 |
B7-9-1 Airmaster, Fan & Fan Cowl
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 12 |
| 14***20 | Bracket, Mounting | 2 |
| 14***00 | Fan, Cooling, 18", 10 Blades | 1 |
C Electrics-Machine, Cab & Engine
C1-1-4 Trailer Electrics
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***2Z | Washer, M20 | 3 |
C1-12-1 Light, Number Plate, Japanese
| 14***00 | Bracket, Number Plate | 1 |
| 70***00 | Light, Number Plate | 1 |
| 71***00 | Harness, Extention | 1 |
C1-11-1 Light, Indicator, Side
| 13***1Z | Nut, 4ba Plain | 2 |
| 14***9Z | Washer | 2 |
| 70***00 | Flasher, Side, Repeater | 2 |
C1-10-1 Light, Number Plate
| 14***83 | Bracket, Number Plate | 1 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C1-9-1 Battery
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***27 | Clamp, Battery | 1 |
C1-1-5 Harnesses
| 12***95 | Clip, Harness Support | 0 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 1 |
C1-14-2 Alarm, Reverse
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
C1-1-3 Harnesses
| 12***95 | Clip, Harness Support | 0 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 0 |
| 70***00 | Lead, Engine Earth | 1 |
C1-9-2 Battery & Isolator, Optional
| 13***8Z | Screw, M6 X 30mm Long | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-16-2 Horn, Rear
| 13***1Z | Nut | 2 |
| 14***6Z | Washer, M6 | 3 |
| 14***6Z | Washer, Spring | 2 |
C1-6-1 Light, Working
| 70***00 | Light, Working | 4 |
| 72***61 | Bulb, 12v-55w H3 | 1 |
C1-1-1 Harnesses
| 12***95 | Clip, Harness Support | 0 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 0 |
| 70***00 | Lead, Engine Earth | 1 |
C1-1-6 Harness, Electrical Detent
| 24***12 | Grommet | 1 |
| 70***17 | Cover, Float Switch Decal | 1 |
| 70***00 | Switch, 12v | 1 |
C1-18-1 Harness, Blanking Plugs
| 21***03 | Plug, 3 Way Male Blanking, Connector | 0 |
| 71***00 | Plug, Junior Timer Sealed, Socket Ho. Amp 2-Way | 0 |
| 71***00 | Plug, Harness Blanking, 2-Way Male, Sealed | 0 |
C1-2-1 Light, Head, Left Hand Dip, Clear
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Left Hand Dip | 2 |
C1-16-1 Horn, Single Tone
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
C1-1-2 Harnesses
| 12***95 | Clip, Harness Support | 0 |
| 12***69 | Clip, 'S'; Replaced By 12***13, See San07976 | 0 |
| 70***00 | Lead, Engine Earth | 1 |
C1-8-1 Light, Beacon, Hazard Warning, Amber
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
C1-20-1 Harness Connectors, Repair Ip67 Standard, Technical Information 2/174 (C45/N.Am.)
| 72***08 | Terminal, 0.5-1.25mm, Fusebox (Pressac) | 1 |
| 72***09 | Terminal, 1.0-3.2mm, Fusebox (Pressac) | 1 |
| 72***10 | Terminal, 2.5-6.mm (Pressac) | 1 |
C1-7-1 Light, Rear
| 14***03 | Screw, Self Tapping | 2 |
| 70***07 | Seal | 1 |
| 70***00 | Light, Rear Combination; Replaced By 70***26 + 72***13, See San 12320 | 1 |
C1-5-1 Trailer Electrics, Pick Up Hitch
| 13***3Z | Nut | 3 |
| 13***9Z | Capscrew | 3 |
| 14***5Z | Washer, M5; Replaces 69***59 | 3 |
C1-14-1 Alarm, Reverse
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 4 |
| 71***00 | Alarm, Reverse | 1 |
C1-22-1 Shovel Reset, Installation
| 12***02 | Bracket, Saddle | 2 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 9 |
| 13***6Z | Bolt, M8 X 70 | 1 |
C1-19-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-4-1 Light, Head, Right Hand Dip, Clear
| 70***01 | Lens | 1 |
| 70***02 | Seal | 1 |
| 70***00 | Light, Unit, Right Hand Dip | 2 |
C1-15-1 Light, Rear Fog
| 13***1Z | Nut, M5-8 | 2 |
| 14***15 | Bracket, Fog Light | 1 |
| 14***00 | Light, Fog, G.A. | 1 |
C2-3-2 Alternator, 72amp
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***08 | Bracket, Drive End | 1 |
C2-2-1 Harnesses, Engine
| 71***00 | Harness, Engine Shut-Off, Solenoid | 1 |
| 71***73 | Harness, Esos, Darwin Engine | 1 |
| 72***50 | Harness, Cold Start Advance L, Ink | 1 |
C2-4-1 Alternator Mountings
| 02***60 | Bracket, Support | 1 |
| 02***61 | Bracket, Mounting | 1 |
| 02***62 | Lever, Alternator Adjusting | 1 |
C2-5-1 Motor, Starter
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 17***01 | Motor, Thermal Waxtat | 1 |
| 17***03 | Terminal, Male Lucar, 90 Degree | 1 |
C2-3-1 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
| 71***05 | Rectifier | 1 |
C3-2-2 Fuse Box & Relays
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***5Z | Bolt | 2 |
| 13***20 | Screw | 2 |
C3-8-1 Warning Light, Cluster
| 70***13 | Bulb, 12v 1.7w | 12 |
| 70***00 | Cluster, Warning Light | 1 |
C3-11-1 Face Level Fan, Installation
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 14***6Z | Washer, Spring | 4 |
C3-4-1 Wash/Wipe, Rear Screen
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 14***6Z | Washer, M6 | 2 |
C3-7-2 Radio Installation
| 14***11 | Housing, Radio | 1 |
| 14***01 | Screw, No.6x3/8" Posiflange, Self Tapping | 7 |
| 14***04 | Screw | 8 |
C3-15-1 Air Conditioning
| 13***3Z | Nut | 4 |
| 13***4Z | Screw | 4 |
| 14***43 | Filter, Recirculation | 1 |
C3-2-1 Switches, Electrical
| 14***71 | Cover, Stalk | 1 |
| 70***31 | Decal, Front Working Lights | 1 |
| 70***33 | Decal, Rear Working Lights | 1 |
C3-1-2 Instrument Cluster, Gauges
| 70***00 | Gauge, Tacho | 1 |
| 70***00 | Gauge, Fuel | 1 |
| 70***00 | Gauge, Water Temp | 1 |
C3-1-1 Instrument Cluster, Rpm
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C3-5-1 Switch, Column
| 11***58 | Gaiter, Column Switch | 2 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 2 |
C3-3-1 Wash/Wipe, Windscreen
| 12***00 | Pump, And Reservoir; Replaced By 25***00, See San07699, Single Pump Type. Refer To Page C3-3-1 For Machines Not Fitted With Non Return Valve At Base Of Bottle., Pump, And Reservoir; Replaced By 25***00, See San07699 | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C3-7-1 Radio Installation
| 14***04 | Screw | 8 |
| 71***00 | Aerial | 1 |
| 71***00 | Speaker, Loud, Set | 1 |
C3-16-1 Air Conditioning, Installation
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***94 | Vent | 5 |
C3-2-3 Switches, Electrical
| 14***71 | Cover, Stalk | 1 |
| 70***60 | Insert, Park Brake | 1 |
| 70***00 | Switch, Ignition; Replaced By 70***84, See San 11449 | 1 |
C3-6-1 Heater, Installation
| 13***3Z | Bolt, M10 X 16 | 1 |
| 13***3Z | Nut | 6 |
| 13***4Z | Screw | 6 |
C3-17-1 Air Conditioning, Hoses
| 14***80 | Bracket, Condenser | 2 |
| 14***81 | Bracket, Condenser | 2 |
| 14***87 | Compressor | 1 |
C3-10-1 Light, Interior, Cab
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 72***54 | Bulb, 12v-10w - Festoon | 1 |
D Controls-Machine, Engine & Steering
D1-5-1 Control Knob, Loader Valve
| 12***59 | Ring, Tolerance | 1 |
| 70***00 | Push Button Black, With Microswitch | 1 |
| 99***00 | Knob, Assembly, Yellow | 1 |
D1-10-2 Lever Lock, Excavator Valve
| 12***81 | Bar, Lever Lock | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***9Z | Bolt, M8 X 35mm | 2 |
D1-3-2 Control, Loader Valve, With Electrical Detent
| 11***16 | Joint, Universal | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 2 |
| 13***4Z | Bolt | 1 |
D1-3-1 Control, Loader Valve
| 11***16 | Joint, Universal | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 2 |
| 13***4Z | Bolt | 1 |
D1-9-1 Lever Lock, Loader Valve
| 14***90 | Bar, Locking | 1 |
| 14***00 | Lever, Loader Control | 1 |
| 24***08 | Grommet | 1 |
D1-2-1 Control, Hydraclamp
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
| 14***19 | Knob | 1 |
| 82***07 | Nut | 1 |
D1-6-2 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
D1-6-1 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***50 | Gaiter | 1 |
| 12***59 | Ring, Tolerance | 1 |
D1-7-2 Control, Foot, Excavator Auxiliary
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
| 13***5Z | Bolt | 2 |
| 13***9Z | Screw, M10x35mm | 2 |
D1-1-1 Controls, Excavator
| 11***16 | Joint, Universal | 2 |
| 12***02 | Knob, Controls, Yellow | 2 |
| 12***59 | Ring, Tolerance | 2 |
D1-10-1 Lever Lock, Excavator Valve
| 12***81 | Bar, Lever Lock | 1 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***9Z | Bolt, M10 X 35 | 2 |
D1-7-1 Control, Foot, Excavator Auxiliary
| 12***81 | Catch, Locking | 1 |
| 12***82 | Plate, Spring Strip | 1 |
| 12***02 | Joint, Ball, M8 Right Hand | 1 |
D1-6-3 Control, Gear Change
| 11***77 | Plate | 1 |
| 12***59 | Ring, Tolerance | 1 |
| 12***96 | Gaiter, Gear Lever | 1 |
D2-1-2 Control, Throttle, Airmaster
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***5Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M6 | 6 |
D2-1-1 Control, Throttle
| 12***09 | Bracket, Throttle Reaction | 1 |
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***5Z | Bolt | 5 |
D3-1-2 Steering Column
| 12***45 | Cap | 1 |
| 12***00 | Wheel, Steering | 1 |
| 13***9Z | Bolt, M10 X 35 | 4 |
D3-1-1 Steering Column
| 12***42 | Knob, Assembly, Steering Wheel | 1 |
| 12***45 | Cap | 1 |
| 12***00 | Wheel, Steering | 1 |
E Hydraulics & Air Including, Steering
E1-2-4 Circuit, Steering
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***00 | Pipe, Assembly | 1 |
E1-2-3 Circuit, Steering
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-3-1 Circuit, Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
E1-1-3 Circuit, Neutral, With Quick Release Couplings
| 13***0Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 4 |
| 14***87 | Hose, Suction | 1 |
E1-2-5 Circuit, Steering
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***7Z | Bolt, M10x25 | 2 |
| 14***94 | Disc, Decal | 1 |
E1-4-1 Circuit, Hydraclamp, With Quick Release Couplings
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***11 | Seal, Bonded | 6 |
E1-9-3 Circuit, Iso Pattern, Boom
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-20-1 Circuit, P.T.O., 3 Point Hitch, Valve Block To Bulkhead
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***14 | Plate, Bulkhead | 1 |
| 14***5Z | Washer, Spring, M5 | 4 |
E1-8-6 Circuit, Jcb Pattern, Dipper & Bucket, 12'0" Excavator End
| 14***00 | Pipe, Assembly | 1 |
| 14***00 | Pipe, Assembly | 1 |
| 61***00 | Hose, 3/8in. Hp | 2 |
E1-12-3 Circuit, Roadbreaker
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 2 |
| 14***11 | Seal, Bonded | 1 |
E1-8-1 Circuit, Jcb Pattern, Dipper & Bucket, Standard Excavator End
| 13***1Z | Screw, Hex Head, M8 X 12 | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***06 | Clamp, Hose | 1 |
E1-12-1 Circuit, Roadbreaker
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 2 |
| 14***11 | Seal, Bonded | 1 |
E1-6-5 Circuit, Loader, H.B.C.V
| 13***2Z | Bolt | 2 |
| 14***00 | Pipe, Assembly | 1 |
| 14***7Z | Washer, Spring | 2 |
E1-2-2 Circuit, Steering, Japanese
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***00 | Pipe, Assembly | 1 |
E1-5-1 Circuit, Slew
| 12***01 | Bracket | 2 |
| 13***2Z | Screw, M6 X 50 | 4 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
E1-1-1 Circuit, Neutral
| 13***0Z | Bolt | 2 |
| 14***87 | Hose, Suction | 1 |
| 14***42 | Tube, Connector; Fitted To Loader And Airmaster Builds. Excavator Builds Have Hydraulic Oil Cooler In Place Of Item 8, See Index E1., Tube, Connector | 1 |
E1-6-1 Circuit, Loader
| 13***9Z | Bolt, M8 X 35mm | 2 |
| 13***2Z | Bolt | 2 |
| 14***00 | Pipe, Assembly | 1 |
E1-12-2 Circuit, Roadbreaker
| 13***5Z | Bolt | 2 |
| 13***4Z | Bolt, M6 X 60 | 2 |
| 13***4Z | Nut, 1/2" B.S.P. | 2 |
E1-7-1 Circuit, Loader, Auxiliary
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M8x40 | 2 |
| 13***0Z | Bolt | 2 |
E1-4-2 Circuit, Hydraclamp
| 13***8Z | Screw, M8x30 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***11 | Seal, Bonded | 6 |
E1-8-3 Circuit, Iso Pattern, Dipper & Bucket, 12'0" Excavator End
| 14***00 | Pipe, Assembly | 1 |
| 14***00 | Pipe, Assembly | 1 |
| 61***00 | Hose, 3/8in. Hp | 2 |
E1-11-1 Circuit, Excavator, Auxiliary
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 3 |
E1-11-3 Circuit, Excavator, Auxiliary, 12'0"
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 3 |
E1-9-2 Circuit, Iso Pattern, Boom
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***2Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-3-3 Circuit, Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-21-1 Circuit, Tilt,Pitch,Lift Rams, 3 Point Hitch
| 13***9Z | Bolt, M8 X 35mm | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 61***00 | Hose | 1 |
E1-13-1 Circuit, Hydraulic Tow Hitch
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-11-4 Circuit, Extending Dipper
| 13***0Z | Bolt, M6 X 40mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***8Z | Screw, M8x30 | 1 |
E1-10-2 Circuit, Stabiliser, Neutral Start, Interlock
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***3Z | Nut | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-8-4 Circuit, Jcb Pattern, Dipper & Bucket, Extending Dipper
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***06 | Clamp, Hose | 1 |
| 14***07 | Clamp | 1 |
E1-22-1 Circuit, Auxiliaries, 3 Point Hitch
| 45***00 | Coupling, Quick Release, 3/8"Bsp Female | 4 |
| 45***01 | Kit-Seal | 0 |
| 47***09 | Cap, Qrc Dust, Blue | 4 |
E1-1-4 Circuit, Neutral, Pto
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***87 | Hose, Suction | 1 |
| 14***14 | Plate, Bulkhead | 1 |
E1-22-2 Circuit, Auxiliaries, 3 Point Hitch
| 45***60 | Coupling, Qrc 3/8"Bsp Female | 4 |
| 47***08 | Cap, Qrc Dust, Green | 4 |
| 47***43 | Hose | 4 |
E1-1-7 Circuit, Neutral, Pto
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***87 | Hose, Suction | 1 |
| 14***42 | Tube, Connector; Fitted To Loader And Airmaster Builds. Excavator Builds Have Hydraulic Oil Cooler In Place Of Item 8, See Index E1., Tube, Connector | 1 |
E1-8-5 Circuit, Iso Pattern, Dipper & Bucket, Extending Dipper
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 14***06 | Clamp, Hose | 1 |
| 14***07 | Clamp | 1 |
E1-1-5 Circuit, Neutral, Pto
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 14***87 | Hose, Suction | 1 |
| 14***14 | Plate, Bulkhead | 1 |
E1-3-2 Circuit, Transmission, Cooling
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***7Z | Screw, M6 X 25mm Long | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 1 |
E1-2-1 Circuit, Steering
| 13***2Z | Nut | 1 |
| 14***11 | Seal, Bonded | 2 |
| 14***00 | Pipe, Assembly | 1 |
E1-1-6 Oil Cooler
| 14***42 | Tube, Connector; Fitted To Loader And Airmaster Builds. Excavator Builds Have Hydraulic Oil Cooler In Place Of Item 8, See Index E1., Tube, Connector | 1 |
| 14***45 | Bracket, Left | 1 |
| 14***46 | Bracket, Right | 1 |
E1-11-2 Circuit, Excavator, Auxiliary, With Quick Release Couplings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***8Z | Screw, M8x30 | 3 |
E1-10-1 Circuit, Stabiliser
| 61***00 | Hose, 1/4bsp X 1100mm | 4 |
| 82***35 | Cover | 2 |
| 82***47 | Clamp, Twin | 2 |
E1-8-2 Circuit, Iso Pattern, Dipper & Bucket, Standard Excavator End
| 14***00 | Pipe, Assembly | 1 |
| 14***00 | Pipe, Assembly | 1 |
| 61***00 | Hose, 3/8in. Hp | 2 |
E1-9-1 Circuit, Jcb Pattern, Boom
| 13***3Z | Screw, M8 X 16 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***2Z | Bolt | 2 |
E1-1-2 Circuit, Neutral
| 13***0Z | Bolt | 2 |
| 14***87 | Hose, Suction | 1 |
| 14***42 | Tube, Connector; Fitted To Loader And Airmaster Builds. Excavator Builds Have Hydraulic Oil Cooler In Place Of Item 8, See Index E1., Tube, Connector | 1 |
E2-1-1 Pump, Main Hydraulic
| 02***35 | Gasket | 1 |
| 13***07 | Screw, Cap | 4 |
| 13***16 | Capscrew, M8 X 70mm | 1 |
E2-2-2 Pump, Main Hydraulic
| 20***01 | Kit-Seal, Pump | 1 |
| 20***03 | Kit, Pressure Plates, (2 Off) | 1 |
| 20***04 | Gear, Drive | 1 |
E2-2-1 Pump, Main Hydraulic
| 20***01 | Kit-Seal, Pump | 1 |
| 20***03 | Kit, Pressure Plates, (2 Off) | 1 |
| 20***04 | Gear, Drive | 1 |
E2-1-2 Pump, Main Hydraulic, Installation
| 13***7Z | Capscrew, M8x25mm | 4 |
| 13***6Z | Capscrew, M8 X 70mm Long | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
E3-1-1 Valve, Control, Excavator, 6 Spool
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***10 | Screw, Cap | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-8-1 Valve, Section
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-11-2 Valve, Relief, Iso, Pilot Operated
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***31 | Valve, Relief,Auxiliary, 3500psi | 0 |
E3-20-1 Valve, Brake Charge
| 12***62 | Adapter, C/W Filter, 5/8"Bsp X 1 1/16"Unf | 1 |
| 13***1Z | Bolt, M10 X 110 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
E3-11-1 Valve, Relief,Jcb, Pilot Operated
| 25***97 | Valve, Main Relief, 3500psi; Shovel Circuit Without Regen. For Use With Single Shovel Ram System Only, Valve, Main Relief, 3500psi | 1 |
| 25***49 | Kit-Seal; Replaced By 25/97***32, See San05243 | 1 |
| 25***31 | Valve, Relief,Auxiliary, 3500psi | 0 |
E3-15-1 Valve, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***02 | Adapter | 1 |
E3-4-1 Valve, Control, Loader, 3 Spool
| 13***12 | Capscrew | 3 |
| 14***36 | Mounting, Bonded | 3 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 6 |
E3-16-1 Valve, Steering Mode, Japanese
| 25***00 | Valve, 2/4 Wheel Steer | 1 |
| 25***01 | Kit, Seal | 1 |
| 25***02 | Coil, 12v | 3 |
E3-33-1 Valve, Relief, 3 Point Hitch
| 25***75 | Kit, Seal | 1 |
| 25***05 | Valve, Relief | 2 |
E3-29-1 Valve, 2ws/4ws
| 25***00 | Valve, 2ws/4ws Changeover | 1 |
| 25***01 | Handle | 1 |
| 25***02 | Adapter | 6 |
E3-21-1 Valve, Ram Lockout, Check
| 16***02 | Adapter | 4 |
| 24***05 | O Ring | 1 |
| 24***06 | O Ring | 1 |
E3-32-1 Valve, Section, 3 Point Hitch
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-2-2 Valve, Control, Excavator, 7 Spool, Iso
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***10 | Screw, Cap | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-10-1 Valve, Relief,Jcb, Direct Acting
| 25***19 | Kit-Seal, Relief Valve | 0 |
| 25***28 | Valve, Relief,Auxiliary, 3500psi | 0 |
| 25***29 | Valve, Relief, 3800psi | 0 |
E3-3-1 Valve, Control, Loader, 2 Spool
| 13***12 | Capscrew | 3 |
| 14***36 | Mounting, Bonded | 3 |
| 16***04 | Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male, Adapter, 3/4"Unf Sae "O" Ring, 3/8"Bsp Male; Early M/C'S Will Have Bonded Seals,Not'O'Ring. See Note 1 | 4 |
E3-2-1 Valve, Control, Excavator, 7 Spool
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***10 | Screw, Cap | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-15-2 Valve, Steering
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***02 | Adapter | 1 |
E3-14-1 Valve, Section
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-22-1 Filter Hydraulic
| 24***24 | O Ring | 1 |
| 27***00 | Filter, Hydraulic, Assembly, 10 Micron | 1 |
| 32***00 | Element, Hydraulic Filter, 10 Micron; San 22618.Cwe To 32/92***46.Ref Pi A01/187, P Guest/M Mcarthy. P Gamble 20/09***06 | 1 |
E3-23-1 Lubricants & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***00 | Strainer, Suction | 1 |
| 32***02 | Element, Air Safety | 1 |
E3-9-1 Cover, Inlet & Outlet, Excavator Valve
| 25***12 | O Ring, Interface, Valve Sections | 2 |
| 25***16 | Seal | 1 |
| 25***17 | Plug | 1 |
E3-7-1 Valve, Section
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-13-1 Valve, Section, Electric Detent
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***26 | Plate, Seal | 1 |
| 25***34 | Seat, Spring | 2 |
E3-10-2 Valve, Relief, Iso, Direct Acting
| 25***19 | Kit-Seal, Relief Valve | 0 |
| 25***28 | Valve, Relief,Auxiliary, 3500psi | 0 |
| 25***29 | Valve, Relief, 3800psi | 0 |
E3-6-1 Valve, Section
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***26 | Plate, Seal | 2 |
E3-12-1 Valve, Section
| 25***03 | Screw; Use 25/60***01 | 2 |
| 25***12 | O Ring, Interface, Valve Sections | 1 |
| 25***25 | Cap, Detent | 1 |
E3-1-2 Valve, Control, Excavator, 6 Spool, Iso
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***10 | Screw, Cap | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 3 |
E3-31-1 Valve, Section, 3 Point Hitch
| 25***73 | Spacer | 1 |
| 25***74 | Spacer | 2 |
| 25***03 | Screw; Use 25/60***01 | 2 |
E3-4-2 Valve, Control, Loader, 3 Spool, Electric Detent
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***12 | Capscrew | 3 |
| 14***36 | Mounting, Bonded | 3 |
E3-30-1 Valve, Control, 3 Point Hitch, 4 Spool
| 13***7Z | Bolt, M10x25 | 2 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 13***08 | Capscrew | 3 |
E4-6-3 Ram, Dipper, Use With Hose Burst Protection
| 12***15 | Bush | 1 |
| 12***21 | Bush, Steel | 1 |
| 14***18 | Spacer, 0.5mm | 0 |
E4-3-1 Ram, Steering, Front & Rear Sd40
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***03 | Ram, Steer, Complete | 2 |
| 55***03 | Cylinder | 1 |
E4-12-1 Ram, Tow Hitch
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***10 | Ram | 1 |
| 55***10 | Cylinder | 1 |
E4-1-3 Ram, Lift, Left Hand, H.B.C.V
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***37 | Plate, Valve | 1 |
E4-6-1 Ram, Dipper
| 12***15 | Bush | 1 |
| 12***21 | Bush, Steel | 1 |
| 14***18 | Spacer, 0.5mm | 0 |
E4-6-2 Ram, Dipper, 12'0"
| 12***15 | Bush | 1 |
| 12***21 | Bush, Steel | 1 |
| 14***18 | Spacer, 0.5mm | 0 |
E4-3-2 Ram, Steering, Front & Rear Sd55
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***07 | Ram, Steer, Complete; Replaced By 99***82, See San 13446 | 2 |
| 55***07 | Cylinder; Superseded By 55***39 By Ge (See Pi C02/102 | 1 |
E4-9-1 Ram, Slew/Swing
| 14***97 | Spacer | 1 |
| 14***11 | Seal, Bonded | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-5-1 Ram, Boom, Standard & Extending
| 12***15 | Bush | 1 |
| 12***21 | Bush, Steel | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-1-4 Ram, Lift, Right Hand, H.B.C.V
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***37 | Plate, Valve | 1 |
E4-7-1 Ram, Bucket
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-11-1 Ram, Extension, Extradig Dipper
| 55***22 | Ram, Assembly Dipper; Replaced By 99***85 | 1 |
| 55***22 | Cylinder | 1 |
| 59***22 | Rod, Piston | 1 |
E4-5-3 Ram, Boom, Use With Hose Burst Protection
| 12***15 | Bush | 1 |
| 12***21 | Bush, Steel | 1 |
| 12***01 | Bracket | 2 |
E4-1-1 Ram, Lift, Left Hand
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-8-1 Ram, Stabiliser
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***93 | Ram, Stabiliser, 70 X 40 | 2 |
E4-5-2 Ram, Boom, 12'0"
| 12***15 | Bush | 1 |
| 12***21 | Bush, Steel | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-2-1 Ram, Shovel
| 14***03 | Nipple, Grease | 1 |
| 55***84 | Ram, Shovel, 70 X 40 | 2 |
| 55***01 | Cylinder, Shovel Ram, 70mm Dia | 1 |
E4-4-1 Ram, Clamshovel, 6 In 1
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 55***21 | Ram, Clamshovel; Replaced By 99***84, See San 13446 | 1 |
| 55***21 | Cylinder | 1 |
E4-10-1 Hydraclamp
| 13***9Z | Bolt, M12x90mm | 16 |
| 14***55 | Cylinder, Hydraclamp | 4 |
| 14***59 | Piston | 4 |
E4-1-2 Ram, Lift, Right Hand
| 12***15 | Bush, Spring | 1 |
| 12***18 | Bush, Spring | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
F Axles, Wheels & Transmission
F1-3-2 Knuckle, Steering, Front, Sd55
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-3-1 Knuckle, Steering, Front, Sd40
| 13***7Z | Bolt, M10x25 | 1 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 16 |
| 44***02 | Trunnion | 4 |
F1-6-3 Differential, Components, Limited Slip - Sd55
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Limited Slip | 1 |
| 44***01 | Housing, Differential | 1 |
F1-5-6 Differential, Assembly, Limited Slip - Sd55
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9t/31t; Replaced By 45***25 | 1 |
| 44***00 | Casing, Outer | 1 |
F1-5-2 Differential, Assembly, Limited Slip, Sd40
| 44***00 | Gear, Crown Wheel & Pinion, 13t/35t; Replaced By 45***00, See San 10680 | 1 |
| 44***01 | Casing, Outer | 1 |
| 44***00 | Differential, Complete | 1 |
F1-4-1 Hub & Components, Sd40
| 13***7Z | Bolt, Coated | 4 |
| 22***41 | Circlip | 6 |
| 22***57 | Circlip, External | 2 |
F1-1-6 Axle Assembly - Sd55, Front, 16.2 : 1 Ratio
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-5-1 Differential, Assembly, Sd40
| 44***00 | Drivehead, Assembly | 1 |
| 44***01 | Casing, Outer | 1 |
| 44***00 | Yoke; Use 44***00, San 04898 | 1 |
F1-5-7 Differential, Assembly, Sd55, 16.2 : 1 Ratio Axle
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-1-1 Axle Assembly - Sd40, Front, 16.154 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
F1-6-4 Differential, Components, Limited Slip-Sd55
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F1-6-1 Differential, Components Sd40
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Gear, Crown Wheel & Pinion, 13t/35t; Replaced By 45***00, See San 10680 | 1 |
| 44***00 | Differential, Assembly | 1 |
F1-2-3 Axle Assembly - Sd55, Front 16.2 : 1, Limited Slip Differential
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
F1-2-8 Axle Assembly - Sd55, Front, Limited Slip Differential 18.6 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-5-5 Differential, Assembly, Sd55
| 13***15 | Bolt, M8 X 65mm Long | 1 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-7-1 Shaft, Drive, Sd40
| 91***00 | Shaft, Drive | 1 |
| 91***01 | Shaft | 2 |
| 91***02 | Kit-Spider, With Circlips | 4 |
F1-5-8 Differential, Assembly, Limited Slip - Sd55, 16.2 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F1-2-5 Axle Assembly - Sd55, Front 18.6 : 1, Limited Slip Differential
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
F1-1-3 Axle Assembly - Sd55, Front 16.2 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
F1-5-10 Differential, Assembly, Limited Slip - Sd55, 18.6 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9t/31t; Replaced By 45***25 | 1 |
| 44***00 | Casing, Outer | 1 |
F1-3-3 Knuckle, Steering, Front, Sd55
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F1-1-8 Axle Assembly - Sd55, Front 18.6 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-4-2 Hub & Components, Sd55
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Carrier, Annulus, Internal Spline | 2 |
F1-6-2 Differential, Components, Sd40, Limited Slip
| 13***15 | Screw | 8 |
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Differential, Limited Slip | 1 |
F1-2-1 Axle Assembly - Sd40, Front, Limited Slip Differential
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
F1-1-5 Axle Assembly - Sd55, Front 18.6 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
F1-1-0 Axles, Information Page
F1-8-1 Remote Greasing
| 13***1Z | Nut | 1 |
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
F1-5-9 Differential, Assembly,, Sd55, 18.6 : 1 Ratio Axle
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-2-4 Axle Assembly - Sd55, Front, Limited Slip Differential, Japanese
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
F1-4-3 Hub & Components, Sd55
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Carrier, Annulus, Internal Spline | 2 |
F1-7-3 Shaft, Drive, Sd55
| 91***02 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***02 | Shaft, Hub Side; 91***01 + 82***94 | 2 |
F1-2-2 Axle Assembly - Sd40, Front, Limited Slip Differential, Japanese
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
F1-5-3 Differential, Assembly, Limited Slip - Sd55
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F1-2-6 Axle Assembly - Sd55, Front 16.2 : 1 Ratio, Limited Slip Differential
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F1-7-4 Shaft, Drive, Sd55
| 91***07 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft | 1 |
F1-5-4 Differential, Assembly, Sd55
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F1-1-4 Axle Assembly - Sd55, Front, Japanese, Adjustable Track Rod
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
F1-1-2 Axle Assembly - Sd40, Front, Japanese, Adjustable Track Rod
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
F2-7-1 Shaft, Drive, Sd40
| 91***00 | Shaft, Drive | 1 |
| 91***01 | Shaft | 2 |
| 91***02 | Kit-Spider, With Circlips | 4 |
F2-5-2 Differential, Assembly,Sd40, Limited Slip
| 44***00 | Gear, Crown Wheel & Pinion, 13t/35t; Replaced By 45***00, See San 10680 | 1 |
| 44***01 | Casing, Outer | 1 |
| 44***00 | Yoke; Use 44***00, San 04898 | 1 |
F2-5-3 Differential, Assembly, Sd55
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-5-6 Differential, Assembly, Limited Slip - Sd55
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9t/31t; Replaced By 45***25 | 1 |
| 44***00 | Casing, Outer | 1 |
F2-2-1 Axle Assembly, Rear, Sd40, Limited Slip Differential
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 13***2Z | Nut, Lock | 1 |
F2-1-4 Axle Assembly - Sd55, Rear, Japanese, Adjustable Trackrod
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F2-3-3 Knuckle, Steering, Rear, Sd55
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F2-3-2 Knuckle, Steering, Rear, Sd55
| 13***5Z | Bolt | 2 |
| 13***9Z | Bolt | 16 |
| 44***02 | Pin, Hexagon Head | 6 |
F2-5-1 Differential, Assembly, Sd40
| 44***01 | Casing, Outer | 1 |
| 44***00 | Yoke; Use 44***00, San 04898 | 1 |
| 44***00 | Drivehead, Complete | 1 |
F2-2-8 Axle Assembly - Sd55, Rear, Limited Slip Differential 18.6 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-1 Hub & Components, Sd55
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Carrier, Annulus, Internal Spline | 2 |
F2-6-3 Differential, Components, Limited Slip - Sd55
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Limited Slip | 1 |
| 44***01 | Housing, Differential | 1 |
F2-1-2 Axle Assembly, Rear, Japanese, Adjustable Trackrod
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 13***2Z | Nut, Lock | 1 |
F2-7-2 Shaft, Drive, Sd55
| 91***02 | Kit-Spider | 4 |
| 91***03 | Circlip | 8 |
| 91***01 | Shaft, Diff Side | 1 |
F2-5-4 Differential, Assembly, Limited Slip - Sd55
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F2-1-6 Axle Assembly - Sd55, Rear 16.2 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-5-9 Differential, Assembly,, Sd55, 18.6 : 1 Ratio Axle
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-5-5 Differential, Assembly, Sd55
| 13***15 | Bolt, M8 X 65mm Long | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-7-4 Shaft, Drive, Sd55
| 33***80 | Shaft, Drive, Diff. Side | 1 |
| 33***30 | Shaft, Drive, Diff. Side | 1 |
| 91***07 | Kit-Spider | 4 |
F2-2-4 Axle Assembly - Sd55, Rear, Limited Slip Differential, Japanese
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F2-1-3 Axle Assembly - Sd55, Rear 16.2 : 1
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F2-5-7 Differential, Assembly, Sd55, 16.2 : 1 Ratio Axle
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 21***16 | Pin, Tension | 1 |
| 44***05 | Nut, Adjusting | 2 |
F2-2-6 Axle Assembly - Sd55, Rear, Limited Slip Differential 16.2 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-3 Hub & Components, Sd55
| 13***7Z | Bolt, Coated | 4 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 6 |
| 44***02 | Carrier, Annulus, Internal Spline | 2 |
F2-6-2 Differential, Components, Sd40, Limited Slip
| 13***15 | Screw | 8 |
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Differential, Limited Slip | 1 |
F2-2-3 Axle Assembly - Sd55, Rear 16.2 : 1, Limited Slip Differential
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F2-2-5 Axle Assembly - Sd55, Rear 18.6 : 1, Limited Slip Differential
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F2-1-8 Axle Assembly - Sd55, Rear 18.6 : 1
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***5Z | Bolt | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-2 Hub & Components, Sd40
| 13***7Z | Bolt, Coated | 4 |
| 22***41 | Circlip | 6 |
| 22***57 | Circlip, External | 2 |
F2-6-4 Differential, Components, Limited Slip-Sd55
| 21***16 | Pin, Tension | 1 |
| 44***08 | Pin, Trunnion | 1 |
| 44***00 | Differential, Assembly | 1 |
F2-3-1 Knuckle, Steering, Rear, Sd40
| 13***7Z | Bolt, M10x25 | 1 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 16 |
| 44***02 | Trunnion | 4 |
F2-1-0 Axles, Information Page
F2-5-10 Differential, Assembly, Limited Slip - Sd55
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 9t/31t; Replaced By 45***25 | 1 |
| 44***00 | Casing, Outer | 1 |
F2-1-1 Axle Assembly, Rear, Sd40
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 13***2Z | Nut, Lock | 1 |
F2-1-5 Axle Assembly - Sd55, Rear 18.6 : 1
| 13***5Z | Bolt | 2 |
| 13***2Z | Nut, Lock | 1 |
| 13***08 | Screw | 1 |
F2-6-1 Differential, Components, Sd40
| 13***16 | Capscrew, M8 X 70mm | 8 |
| 44***00 | Gear, Crown Wheel & Pinion, 13t/35t; Replaced By 45***00, See San 10680 | 1 |
| 44***00 | Differential, Assembly | 1 |
F2-5-8 Differential, Assembly, Limited Slip - Sd55, 16.2 : 1 Ratio Axle
| 44***05 | Nut, Adjusting | 2 |
| 44***00 | Gear, Crown Wheel & Pinion, 33t/11t; Replaced By 45***31, See San 10680 | 1 |
| 44***00 | Casing, Outer | 1 |
F2-2-2 Axle Assembly, Rear, Limited Slip Differential, Japanese
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 12 |
| 13***2Z | Nut, Lock | 1 |
F3-55-8 Wheels & Tyres
| 10***01 | Nut | 20 |
| 14***15 | Stop | 4 |
| 14***00 | Wheel, Assembly 400/55 R22. | 4 |
F3-55-9 Wheels & Tyres, 14.5/80 X 18
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 14***08 | Stop | 0 |
F3-55-3 Wheels & Tyres
| 10***01 | Nut | 20 |
| 14***08 | Stop | 0 |
| 14***00 | Wheel, Assembly,15.5/55xr18, Dunlop | 4 |
F3-1-1 Propshafts, Transmission, Sd 40 Axles
| 11***24 | Strap, Bearing | 4 |
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
F3-55-7 Wheels & Tyres
| 10***01 | Nut | 20 |
| 14***08 | Stop | 4 |
| 14***15 | Stop | 4 |
F3-1-11 Propshafts, Transmission, 3 Point Hitch Machine
| 11***24 | Strap, Bearing | 2 |
| 11***25 | Strap | 8 |
| 13***0Z | Bolt, M10 X 40 | 4 |
F3-55-5 Wheels & Tyres
| 10***01 | Nut | 1 |
| 14***15 | Stop | 0 |
| 14***00 | Wheel, Assembly, 405/70 R20 Xm27 | 1 |
F3-1-5 Propshafts, Transmission, Sd 55 Axles
| 11***25 | Strap | 8 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 16 |
| 91***01 | Kit-Spider, Cap D=35mm X 106.4 | 1 |
F3-2-1 Wheels & Tyres, Sd 40 Axles Only
| 10***01 | Nut | 16 |
| 14***96 | Stop | 0 |
| 14***00 | Wheel, Assembly, 12.5/80 X 18 10ply | 4 |
F3-55-1 Wheels & Tyres
| 10***01 | Nut | 20 |
| 12***41 | Valve, Tyre, Flexible (Tubeless) | 1 |
| 14***96 | Stop | 0 |
F3-1-10 Propshafts, Transmission, Airmaster
| 11***24 | Strap, Bearing | 2 |
| 11***25 | Strap | 8 |
| 13***3Z | Nut, Lock, M10 | 4 |
F5-3-1 Transmission, Jcb Syncro Shuttle, Components, 30kph
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-2-3 Transmission, Jcb Syncro Shuttle, Output Gear Components 30kph - Sd55
| 44***03 | Yoke, Coupling | 2 |
| 44***01 | Gear, Output Shaft, 37t; Replaced By 44***02 + 82***53, See San 10694 | 1 |
| 44***02 | Gear, Output Shaft, Ss400, 37t | 1 |
F5-1-4 Transmission, Jcb Syncro Shuttle, 20kph, Sd55, German
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-5-1 Transmission, Jcb Syncro Shuttle, Gear Change
| 13***7Z | Bolt, Coated | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***22 | Lever, Gear Shift | 1 |
F5-6-1 Transmission, Mounting
| 11***01 | Mounting, Metalastik | 2 |
| 12***53 | Washer, Rebound | 2 |
| 13***8Z | Bolt, M12 X 80mm | 2 |
F5-2-1 Transmission, Jcb Syncro Shuttle, Output Gear Components 30kph
| 44***00 | Yoke | 1 |
| 44***03 | Yoke, Coupling | 1 |
| 44***25 | Spacer | 1 |
F5-2-5 Transmission, Jcb Syncro Shuttle, Output Gear Components Pto
| 21***04 | Dowel | 3 |
| 22***76 | Circlip | 1 |
| 25***00 | Valve, Solenoid, 4 Way | 1 |
F5-1-8 Transmission, Jcb Syncro Shuttle, 20kph, P.T.O.
| 13***9Z | Screw, M10x35mm | 31 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***2Z | Bolt | 4 |
F5-6-2 Transmission, Mounting Pto
| 11***01 | Mounting, Metalastik | 2 |
| 12***53 | Washer, Rebound | 2 |
| 13***8Z | Bolt, M12 X 80mm | 2 |
F5-1-3 Transmission, Jcb Syncro Shuttle, 30kph, Sd55
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-3-3 Transmission, Jcb Syncro Shuttle, Components, 30kph, Sd55
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-8-1 Transmission, Jcb Syncro Shuttle, Brake Pipes, Pto
| 14***11 | Seal, Bonded | 2 |
| 44***04 | Adapter, Tee | 1 |
| 44***05 | Adapter | 1 |
F5-1-5 Transmission, Jcb Syncro Shuttle, 30kph, Airmaster
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***2Z | Bolt | 4 |
F5-3-5 Transmission, Jcb Syncro Shuttle, Components, 20kph, Sd55
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-1-6 Transmission, Jcb Syncro Shuttle, 30kph, Sd55
| 13***7Z | Bolt, M10x25 | 5 |
| 13***7Z | Screw, M6 X 25; Replaced By 13***07, See San08904 | 4 |
| 13***3Z | Screw, M8 X 16 | 2 |
F5-2-10 Transmission, Jcb Syncro Shuttle, Gear Components Engine Driven,Pto
| 44***01 | Gear, Engine Driven; Replaced By Mss 45***99 + 91***01, 459/50, 279. See San 12632 | 1 |
| 44***02 | Bush | 1 |
| 44***03 | Washer, Thrust; Use 44***01. San 07127 14/10/96 | 2 |
F5-7-1 Torque Converter, And Dipstick
| 02***70 | Dowel | 2 |
| 03***01 | Converter, 2.83:1 Ratio, 3 Brown Spots; Ld & Lh Engine. France,Austria,Swiss,Nordic,Italy,Spain & Reunion., Converter, 2.83:1 Ratio, 3 Brown Spots | 1 |
| 04***00 | Kit-Drive Plate | 1 |
F5-4-4 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 10 |
| 44***09 | Washer, Thrust | 2 |
F5-1-1 Transmission, Jcb Syncro Shuttle, 30kph
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-4-2 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-7-2 Torque Converter, And Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***03 | Bolt | 6 |
F5-20-1 Gearbox, Pto, Transfer Tg150
| 13***6Z | Bolt, Hex. Head, M10 X 70 | 9 |
| 13***28 | Capscrew | 3 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
F5-2-4 Transmission, Jcb Syncro Shuttle, Output Gear Components 20kph, Sd55
| 44***03 | Yoke, Coupling | 2 |
| 44***14 | Gear, Output; Replaced By 44***01 + 82***53, See San 10694 | 1 |
| 44***25 | Spacer | 1 |
F5-4-3 Clutch, Pto
| 44***06 | Plate, Friction | 7 |
| 44***07 | Plate, Counter | 6 |
| 44***00 | Housing | 1 |
F5-3-2 Transmission, Jcb Syncro Shuttle, Components, 20kph
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-7-4 Torque Converter, And Dipstick, Groundmaster With Hydraulic Towhitch
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***03 | Bolt | 6 |
F5-1-2 Transmission, Jcb Syncro Shuttle, 20kph, German
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 5 |
| 13***4Z | Bolt, M10x60 | 4 |
F5-3-4 Transmission, Jcb Syncro Shuttle, Components, 30kph, Sd55
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 2 |
| 44***03 | Sleeve | 2 |
| 44***09 | Washer, Thrust | 2 |
F5-2-2 Transmission, Jcb Syncro Shuttle, Output Gear Components 20kph
| 44***00 | Yoke | 1 |
| 44***03 | Yoke, Coupling | 1 |
| 44***14 | Gear, Output; Replaced By 44***01 + 82***53, See San 10694 | 1 |
F5-4-1 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 8 |
| 44***09 | Washer, Thrust | 2 |
F5-7-3 Torque Converter, And Dipstick
| 02***70 | Dowel | 2 |
| 04***00 | Kit-Drive Plate | 1 |
| 04***03 | Bolt | 6 |
F5-1-7 Transmission, Jcb Syncro Shuttle, 30kph, P.T.O.
| 13***9Z | Screw, M10x35mm | 31 |
| 13***1Z | Bolt, M8 X 45 | 4 |
| 13***2Z | Bolt | 4 |
G Brakes
G1-14-1 Brake Valve, Trailer
| 25***00 | Valve, Throttle Trailer, Brake | 1 |
| 25***02 | Kit-Seal | 1 |
| 25***01 | Kit-Repair | 1 |
G1-4-1 Brake Pedal
| 13***8Z | Screw, M8x30 | 1 |
| 13***0Z | Bolt | 2 |
| 13***2Z | Nut; Replaces 162l006vr, San 12352 | 1 |
G1-1-1 Brake, System
| 14***32 | Pipe, Brake, Rear Cross | 1 |
| 14***01 | Pipe, Brake | 1 |
| 14***02 | Pipe, Brake | 1 |
G1-3-1 Brake System, Charge Circuit
| 12***62 | Adapter, C/W Filter, 5/8"Bsp X 1 1/16"Unf | 1 |
| 13***7Z | Bolt, M8 X75mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
G1-2-1 Brake, Axle Type Sd55
| 22***45 | Circlip | 4 |
| 44***02 | Pin, Hexagon Head | 12 |
| 44***02 | Carrier, Annulus, Internal Spline | 4 |
G1-2-2 Brake, Axle Type Sd40
| 44***08 | Plate, Pressure | 4 |
| 44***19 | Plate, Brake Friction; Replaced By 45***81 + 45***86, See San 12414 | 8 |
| 44***20 | Plate, Brake Counter; Replaced By 45***81 + 45***86, See San 12414, Plate, Brake Counter; Replaced By 45***81 + 45***86, See San 12414, See Ti G057(G19/N.Am). Latest Brake Plates(Friction/Counter)Can Be Fitted To Earlier Axles In Complete Sets Only | 12 |
G1-15-1 Brakes, Trailer, Hydraulic, Pto
| 13***6Z | Bolt, M8 X 70 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
P Engine
P1-6-1 Timing Case, Camshaft & Gears, Ar Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
P1-5-5 Fans, Pulleys, & Fan Belt, Air Conditioning, Aj Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
P1-6-2 Timing Case, Camshaft & Gears, Aj Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***09 | Plug, Taper, Threaded; Tu Build Only. Included In Item 1, Plug, Taper, Threaded | 1 |
P1-3-2 Block Assembly, Aj Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-5-1 Fans, Pulleys, & Fan Belt, Ar Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-5-2 Fans, Pulleys, & Fan Belt, Air Conditioning, Ar Build
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
| 02***18 | Pulley, Crankshaft, Twin Groove | 1 |
P1-2-1 Engine, Short, Ar Build
| 02***00 | Engine, Short, Nat/Asp | 1 |
| 02***82 | Engine, Short | 1 |
P1-1-1 Engine, Complete, Ar Build, 75 Bhp
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated, 75bhp | 1 |
P1-1-3 Engine, Complete
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated,75bhp | 1 |
P1-1-2 Engine, Complete, Aj Build, 66 Bhp
| 01***00 | Engine, Complete 1004-4, Nat/Aspirated, 65bhp | 1 |
P1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ar Build
| 02***38 | Key | 2 |
| 02***28 | Nut | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
P1-3-1 Block Assembly, Ar Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***08 | Plug | 1 |
P1-2-2 Engine, Short, Aj Build
| 02***60 | Engine, Short, Turbo | 1 |
P1-7-1 Flywheel & Housing, Ar & Aj Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***70 | Bolt | 6 |
| 02***37 | Flywheel, Assembly | 1 |
P1-6-3 Timing Case, Camshaft & Gears, Ar Build
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***95 | Plug, Taper | 1 |
P1-2-3 Engine, Long, Ar Build, 75 Bhp
| 02***41 | Motor, Long | 1 |
P1-5-3 Fans, Pulleys, & Fan Belt, High Speed, Ar Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-5-4 Fans, Pulleys, & Fan Belt, Aj Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P1-8-1 Engine Mountings
| 12***53 | Washer, Rebound | 2 |
| 12***38 | Mounting, Rubber | 2 |
| 13***0Z | Bolt, M16 X 40mm | 2 |
P1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Aj Build
| 02***38 | Key | 2 |
| 02***02 | Kit-Bearing, Main, Standard; 1 1 4 4 | 1 |
| 02***03 | Kit-Bearing, Main, Undersize - .010inch | 1 |
P1-2-4 Engine, Long, Aj Build, 66 Bhp
| 02***35 | Engine Short | 1 |
P1-5-6 Fans, Pulleys, & Fan Belt, High Speed, Aj Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***79 | Screw | 3 |
| 02***17 | Block, Thrust | 1 |
P2-2-1 Rocker Assembly, Push Rods & Tappets, Ar Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-1-1 Cylinder Head, Ar Build
| 02***21 | Bolt, Cylinder Head | 4 |
| 02***48 | Plug | 1 |
| 02***96 | Plug, Core, D=32mm | 1 |
P2-2-2 Rocker Assembly, Push Rods & Tappets, Aj Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
P2-3-1 Rocker Cover, Ar & Aj Builds
| 02***69 | Bush | 3 |
| 02***58 | Hose, Oil Breather | 1 |
| 02***59 | Bracket | 1 |
P2-4-1 Lifting Plates, Engine, Aj & Ar Builds
| 02***31 | Plate, Lifting | 1 |
| 02***57 | Plate, Lifting | 1 |
| 82***00 | Screw | 4 |
P2-2-3 Rocker Assembly, Push Rods & Tappets, Ar Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***43 | Rod, Push | 8 |
P2-1-2 Cylinder Head, Aj Build
| 02***20 | Bolt, Cylinder Head | 8 |
| 02***21 | Bolt, Cylinder Head | 12 |
| 02***22 | Bolt, Cylinder Head | 2 |
P3-3-1 Filter, Air, Aj Builds
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
P3-1-2 Manifold, Induction, Aj Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***16 | Manifold, Induction | 1 |
| 02***30 | Bolt | 4 |
P3-3-2 Filter, Air
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 2 |
| 13***0Z | Bolt, M10 X 40 | 2 |
P3-1-1 Manifold, Induction, Ar Build
| 02***10 | Plug | 1 |
| 02***36 | Gasket | 2 |
| 02***37 | Connector, Air Inlet | 1 |
P3-2-2 Manifold, Exhaust, Aj Build
| 02***34 | Gasket, Ind/Exhst Manifolds | 2 |
| 02***83 | Ferrule | 2 |
| 02***17 | Manifold, Exhaust | 1 |
P3-4-1 Silencer & Extension
| 02***02 | Stud | 3 |
| 02***35 | Nut, Anti-Seize | 3 |
| 12***98 | Cap, Rain 60mm | 1 |
P3-2-1 Manifold, Exhaust, Ar Build
| 02***36 | Gasket, Ind/Exhst Manifold | 1 |
| 02***37 | Manifold, Exhaust | 1 |
| 02***02 | Stud | 3 |
P4-4-1 Radiator & Hoses
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 2 |
| 12***39 | Tank, Header, Cooling System | 1 |
| 12***14 | Plug | 1 |
P4-4-3 Radiator & Hoses
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 2 |
| 12***39 | Tank, Header, Cooling System | 1 |
| 12***14 | Plug | 1 |
P4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
P4-4-2 Radiator & Hoses
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 2 |
| 12***39 | Tank, Header, Cooling System | 1 |
| 12***14 | Plug | 1 |
P4-2-2 Thermostat, Housing, Inlet & Outlet, Aj & Ar Builds
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P4-1-1 Pump, Water, Ar & Aj Builds
| 02***39 | Gasket, W/Pump To T/Case | 1 |
| 02***01 | Kit-Repair, Water Pump | 1 |
| 02***10 | Pump, Water | 1 |
P4-2-1 Thermostat, Housing, Inlet & Outlet, Aj & Ar Builds
| 02***95 | Plug, Taper | 1 |
| 02***43 | Gasket, Thermo/Hsg To Block | 1 |
| 02***44 | Thermostat, Single Jiggle Pin | 1 |
P5-2-1 Pump, Oil, & Relief Valve, Ar Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P5-5-1 Cooler, Oil, Filter & Pipework, Aj & Ar Builds
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***08 | Spring | 1 |
| 02***91 | Plunger | 1 |
P5-4-1 Filter, Oil, Aj & Ar Builds
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***94 | Connector | 1 |
| 02***84 | Gasket | 2 |
P5-1-1 Sump, Oil, & Fittings, Ar & Aj Builds
| 02***26 | Spacer | 1 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***69 | Gasket, Oil Sump | 1 |
P5-3-1 Piston Cooling Jets, Aj & Ar Builds
| 02***98 | Valve | 1 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
P5-2-2 Pump, Oil, & Relief Valve, Aj Build
| 02***19 | Thimble | 2 |
| 02***28 | Circlip | 1 |
| 02***99 | Plunger | 1 |
P6-1-1 Pump, Fuel Injection, Ar Build
| 02***63 | Bracket, Support | 3 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-3-1 Fuel Pipes, Injection Pump, Ar Build
| 02***64 | Olive | 4 |
| 02***05 | Pipe, Fuel, F/Filter To Inj/Pump | 1 |
| 02***45 | Pipe, Fuel, Inj/Pump To F/Filter | 1 |
P6-7-1 Filter, Fuel
| 02***52 | Bracket, Mounting | 1 |
| 02***37 | Bolt | 2 |
| 02***59 | Nut | 2 |
P6-5-2 Fuel Heater, & Fuel Feed Pipe, Aj Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P6-8-1 Pump, Fuel Lift
| 02***72 | Plate, Keep | 2 |
| 02***89 | Gasket | 1 |
| 02***32 | Bolt, M8 X 20mm | 4 |
P6-1-2 Pump, Fuel Injection, Aj Build
| 02***63 | Bracket, Support | 3 |
| 02***12 | O Ring | 1 |
| 02***37 | Gear, Injection Pump | 1 |
P6-2-1 Injectors, Fuel, & Injection Pipes, Ar Build
| 02***59 | Adapter, Union | 2 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-4-1 Fuel Pipes, Tank To Fuel Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***64 | Olive | 4 |
P6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
P6-3-2 Fuel Pipes, Injection Pump, Aj Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***64 | Olive | 4 |
P6-2-2 Injectors, Fuel, & Injection Pipes, Aj Build
| 02***59 | Adapter, Union | 2 |
| 02***25 | Clamp | 2 |
| 02***26 | Clamp | 1 |
P6-5-1 Fuel Heater, & Fuel Feed Pipe, Ar Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
P7-5-1 Compressor, Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***1Z | Bolt, M10 X 45mm | 1 |
| 13***4Z | Bolt, M10x60 | 2 |
P7-6-1 Compressor, Air Conditioning
| 12***98 | Compressor, 12v; See Also Index P. For Machine M1017341 See C3-20-1 (Exception), Compressor, 12v | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
P7-7-2 Heater, Engine Block
| 13***3Z | Screw, M6x16 | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
P7-7-1 Block Heater, Freeze Plug Type, Optional
| 71***00 | Kit-Heater, Engine Block, 120v, Freeze Plug Type | 1 |
P8-1-1 Gasket Set, Top, Ar Build
| 02***30 | Kit-Gasket, Top | 1 |
P8-2-1 Gasket Set, Bottom, Ar Build
| 02***31 | Kit-Gasket, Bottom | 1 |
P8-2-2 Gasket Set, Bottom, Aj Build
| 02***26 | Kit-Gasket, Bottom | 1 |
P8-1-2 Gasket Set, Top, Aj Build
| 02***49 | Kit-Gasket, Top | 1 |
Frequently asked questions
What engine does the JCB 210S use?
The JCB 210S is powered by a 60 hp (45 kW) 4-cylinder turbo diesel engine. It does not use DEF or DPF.
What is the operating weight of the JCB 210S?
The operating weight is approximately 4,626 kg (10,196 lb), varying by configuration and attachments.
What model replaced the JCB 210S?
The JCB 210S was succeeded by the 214S and 216S series backhoe loaders.
What 210S LE owners discuss
What engine powers the JCB 210S backhoe loader?
The JCB 210S is powered by a 4-cylinder turbo diesel engine rated at 60 hp (45 kW). The 210SU is the North American equivalent of the European 2CX model. The 210S skid steer loader uses a different 74 hp (55 kW) JCB Diesel by Kohler engine.
What are the common hydraulic system issues reported for the JCB 210S?
Operators report hydraulic fluid leaks caused by worn seals or hoses, which lead to decreased performance. The system requires zinc-free hydraulic oil to protect components and prevent deposit buildup. High oil temperature and sticking spools can occur if the oil cooler or grille is blocked.
What are the typical fuel system quirks and failure points for the JCB 210S?
The machine may experience sudden shutdowns if debris blocks the fuel line exit from the tank. The lift pump includes a priming lever. Older models with Delphi injection pumps have wire strainer filters inside the banjo bolts at the pump input fitting, which are often missed during maintenance.
What electrical or wiring problems are common on the JCB 210S?
The wiring harness between the cab and engine compartment is prone to thermo-melt-downs due to pinching. The electrical system uses extensive yellow wires for ground circuits, which can lead to carbon and oxidized copper buildup at connection points.
What transmission behaviors are typical for the JCB 210S?
The 1995 JCB 210S 4WD features a shuttle transmission. Owners report that the transmission pressure warning light and buzzer may activate even after changing fluid, filters, and cleaning the sump screen. Some units may lurch forward and stop if the transmission is failing.
What are the undercarriage and wear patterns for the JCB 210S?
The JCB 210S is a backhoe loader with a transport length of 4.88 meters and an operating weight of up to 10,000 lbs (4,536 kg). It features a center pivot backhoe with anti-drift hydraulics. Wear pads and stabilizer leg seals are common service items.
What should be checked when buying a used JCB 210S?
Inspect the wiring harness for melted insulation between the cab and engine. Check for hydraulic leaks at seals and hoses. Verify the transmission pressure warning system. Ensure the fuel tank is clean and the lift pump priming lever functions. Check for British metric standard threads on hydraulic fittings.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 210S LE part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.