JCBconstructionbackhoe loader 3cx,4cx,214,215,217
Jcb 1550B-2WD
Maintenance schedule, common problems & OEM parts breakdown
The JCB 1550B-2WD is a two-wheel drive backhoe loader produced from 1990 to 1995. It is powered by a Perkins LH 4.236 turbocharged diesel engine producing 83 gross horsepower at 2,200 rpm. The standard configuration weighs 15,510 pounds (7,035 kg). It features a JCB Synchro Shuttle manual transmission with four synchronized forward and four synchronized reverse gears. Configurations included a standard canopy, optional cab, and various tire setups such as 11L-16 PR front and 16.9 x 24 10PR rear tires.
The 1550B succeeded the 1400B and was followed by the 2CX series. It remains relevant in the used market due to its simple, non-DEF Dieselmax-style engine architecture and robust hydraulic system. The machine is valued for its ease of repair and availability of aftermarket parts, particularly for the Perkins engine and JCB Synchro Shuttle transmission. Its two-wheel drive configuration makes it a specific niche choice for operators prioritizing maneuverability on paved surfaces over off-road traction.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 1550B-2WD specifications
Engine
| Model | Perkins LH 4.236 |
| Cylinders | 4 |
| Gross Power | 83 hp at 2,200 rpm |
| Gross Torque | 229 ft·lb at 1,400 rpm |
| Compression Ratio | 16.5:1 |
| Main Bearings | 5 |
Weights
| Operating Weight (Standard) | 15,510 lb |
Dimensions
| Transport Length | 25 ft 1 in |
| Transport Width | 8 ft |
| Transport Height | 12 ft 9 in |
| Front Tire Size | 11L-16 PR |
| Rear Tire Size | 16.9 x 24 10PR |
Performance
| Max Digging Depth | 17 ft |
| Loader Bucket Capacity | 1.25 cu yd |
| Loader Lift Capacity (Full Height) | 7,300 lb |
| Max Loader Height | 13 ft 2 in |
| Transmission | JCB Synchro Shuttle (4 forward / 4 reverse) |
Service capacities (summary)
| Fuel Tank | 24 gal |
| Cooling System | 3.6 gal |
| Engine Oil (incl. filter) | 2.8 gal |
| Transmission Oil (incl. filter) | 5 gal |
| Hydraulic Tank | 19 gal |
| Hydraulic System (Total incl. filter) | 34.7 gal |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
1550B-2WD fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 10.6 L (2.8 US gal) | JCB 15W/40 Multigrade (climate range -10°C to 50°C / 14°F to 122°F) |
| Cooling System | 13.6 L (3.6 US gal) | Not specified in source text |
| Fuel Tank | 90.8 L (24 US gal) | Diesel Oil (See Types of Fuel) |
| Transmission/Powertrain (2WD) | 18.9 L (5 US gal) | JCB Super Universal Agricultural |
| Hydraulic System (Tank) | 71.9 L (19 US gal) | JCB Hydro Fluid |
| Hydraulic System (Total) | 128.7 L (34 US gal) | JCB Hydro Fluid |
| Hydraulic Filter | 2.6 L (0.7 US gal) | JCB Hydro Fluid |
| Final Drives | Not specified in source text | Not specified in source text |
| Axles/Differentials | Not specified in source text | Not specified in source text |
| Grease | N/A | Not specified in source text |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Jcb 1550B-2WD maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 1550B-2WD beyond the schedule
Predictive Maintenance & Fluid Analysis
Baseline fluid analysis is critical for the 1550B-2WD at the 500-hour mark. Sample engine oil, hydraulic fluid, and axle oils to detect early wear. The Perkins LH 4.236 engine relies on clean fuel; inspect the primary and secondary fuel filters for water or debris. Monitor the hydraulic return filter magnet for metallic particles, indicating pump or valve wear. Use JCB 15W-40 diesel oil meeting API specifications. Check the coolant level in the 3.6-gallon (3.4 L) system to prevent overheating in the turbocharged engine.
Corrective & Common Repairs
The 1550B-2WD frequently experiences low oil pressure warnings after long storage periods due to sensor faults or degraded oil. Verify the oil pressure sending unit and oil pump condition. The JCB Synchro Shuttle transmission requires 5 gallons (18.9 L) of oil with the filter; check for leaks at the transmission housing. Hydraulic system issues often manifest as slow bucket extension; inspect the backhoe control valve for zero-setting errors. Replace worn front tires (11L-16 PR) and rear tires (16.9 x 24 10PR) to maintain stability and traction.
Overhaul & Rebuild Points
At 2,000 hours, inspect the turbocharger shaft play and charge cooler boots for leaks. Check injector spray patterns using a diagnostic tool; replace injectors if patterns are erratic. Inspect the hydraulic tank for sludge and clean thoroughly before refilling. The 1550B-2WD chassis requires structural inspection of the boom, arm, and loader arm for cracks or unauthorized welding. Measure swing ring play if equipped with a swing mechanism variant. Service the immersed brake system and check disc wear.
Seasonal & Environment Servicing
In cold weather, use JCB Super Universal Agricultural fluid rated to -15°C (5°F) and ensure the cooling system is protected to the correct mixture. In hot weather, monitor the 3.6-gallon (3.4 L) cooling system closely. Clean the air filter housing regularly to prevent debris accumulation. Store the machine under cover to protect the canopy or cab from weather damage. Check the battery electrolyte levels in non-sealed units. Inspect all belts for tension and cracking, especially the alternator and fan belts.
1550B-2WD common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 02/100183 | Pipe, Fuel, Assembly, Filter To Inj/Pump | Fuel system service | Check fitment → |
| 02/100184 | Pipe, Fuel, Assembly, Inj/Pump To Filter | Fuel system service | Check fitment → |
| 02/100186 | Pipe, Fuel, Filter, To Heater Plug | Fuel system service | Check fitment → |
| 200/44600 | Filter, Assembly, Fuel Sediment | Fuel system service | Check fitment → |
| 32/202601 | Element, Air-Safety | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
1550B-2WD fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail/system pressure too low | Clogged fuel filters, failing lift pump, or restricted fuel line | Check fuel filter condition and fuel pump operation |
| P0117 | Engine coolant temperature sensor circuit low voltage | Faulty coolant temperature sensor or wiring short to ground | Inspect sensor connector for corrosion and test sensor resistance |
| P0521 | Engine oil pressure sensor range/performance issue | Faulty oil pressure sensor or low oil level | Verify oil level and inspect sensor wiring harness |
| P2047 | Reductant injector circuit open (SCR system fault) | DEF injector circuit failure or clogged injector | Inspect DEF injector wiring and connections |
| U0100 | Lost communication with Engine Control Module (ECM) | Loose battery terminals, poor ground straps, or CAN bus fault | Check battery voltage and clean ground connections |
| 101 | Low transmission clutch pressure detected | Transmission fluid level low or internal pressure fault | Check transmission oil level and filter condition |
| F01 | Engine control module failure | ECU hardware fault or power supply issue | Check ECU power and ground connections |
| E420 | Low hydraulic pressure | Low hydraulic fluid level or pump wear | Refill hydraulic tank and check for leaks |
| E512 | Low voltage detected | Weak battery or failing alternator | Charge or replace battery and test alternator output |
| C321 | Overheating warning | Low coolant level or blocked radiator | Check coolant level and clean radiator fins |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
1550B-2WD attachments & work tools
Loader Buckets
Standard loader bucket capacity is 1.25 cubic yards (0.96 m³). The standard configuration provides a lift capacity to full height of 7,300 pounds (3,311 kg) and reaches a maximum height of 13 feet, 2 inches (0.05 m).
Backhoe Assemblies
The backhoe assembly is 25 feet, 1 inch (0.03 m) long and 8 feet (2.44 m) wide. The maximum digging depth is 17 feet (5.18 m). Extended backhoe options are available for this model.
Stabilizer Configurations
Stabilizer cylinder rebuild kits are available for centermount machines with rod diameters of 60 mm and bores of 100 mm. Side-shift hoe configurations utilize specific rod V-stack serial number ranges for stabilizer cylinder identification.
Forklift Attachments
Forklift forks are listed as a standard or available attachment option for the JCB 1550B-2WD loader backhoe.
Trenching Tools
Trenching buckets are available as work tools for this machine class, compatible with the standard backhoe mounting system.
Cab & Operator Protection
The standard model is equipped with a canopy to protect the operator. An enclosed cab option is available, featuring a sliding back glass for ventilation and visibility.
Hydraulic System Specifications
The hydraulic system tank holds 19 gallons (71.9 L). The entire system, including the tank, contains 34 gallons (128.7 L) plus an additional 0.7 gallons (2.6 L) for the hydraulic filter. The transmission oil capacity with filter is 5 gallons (18.9 L).
Engine Specifications
The machine utilizes a Perkins 4.236 diesel engine. The turbocharged engine produces a gross horsepower of 83 at 2,200 rpm and a gross maximum torque of 229 foot-pounds (310 Nm) at 1,400 rpm. The compression ratio is 16.5:1 with five main bearings.
Transmission & Drivetrain
The standard model features a JCB Synchro Shuttle manual transmission with four synchronized forward and four synchronized reverse gears. The two-wheel drive configuration includes power steering for the front wheels with a manual override capability.
Tire Specifications
On the two-wheel drive standard model, the front tire size is 11L-16 PR and the rear tires are 16.9 x 24 10PR. Alternative tire options such as LT (OEM part reference for the front) and 18.5-24 (for the rear) are observed in used equipment listings.
Fluid Capacities
Service capacities include a cooling system holding 3.6 gallons (13.6 L), a fuel tank holding 24 gallons (90.8 L), and engine oil including the filter at 2.8 gallons (10.6 L).
Machine Dimensions & Weight
The JCB 1550B-2WD is 25 feet, 1 inch (0.03 m) long, 8 feet (2.44 m) wide, and 12 feet, 9 inches (0.23 m) in height. The standard configuration weighs 15,510 pounds (7,035 kg).
Serial Number Applicability
Parts and service documentation for the JCB 1550B-2WD covers serial number ranges including M306001 and up to M39xxxx. Cylinder seal kits are specified for serial numbers the OEM part reference to the OEM part reference and the OEM part reference to the OEM part reference.
All 1550B-2WD assemblies by section
Every catalogued assembly group for the Jcb 1550B-2WD. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A1-3-5 Fork Lift, 1.1cu.Yd., 6in1 Shovel Mounted
| 10***17 | Pin, Pivot | 2 |
| 12***23 | Bracket, Fork Link | 2 |
| 13***18 | Bolt | 2 |
A1-1-1 Shovel, Standard
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***11 | Boss | 4 |
A1-3-4 Fork Lift, Gp Shovel, Standard
| 12***02 | Plate | 2 |
| 12***03 | Plate | 1 |
| 13***24 | Bolt | 2 |
A1-4-1 Crane Hook, Fork Mounted
| 10***23 | Pin, Pivot | 1 |
| 11***00 | Pin, Lynch, With Chain | 1 |
| 12***39 | Attachment, Crane Hook Assembly, Fork Mounted | 1 |
A1-2-6 Shovel, Clam, 6 In 1, 1.2cu.Yd., 2438mm (8'0") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-2-3 Shovel, Clam, 6 In 1, 1.1cu.Yd., 2260mm (7'5") Wide
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-3-3 Fork Lift, 1.1cu.Yd., 6in1 Shovel Mounted
| 12***00 | Fork, Shovel Mounted | 1 |
| 12***00 | Fork | 2 |
| 12***00 | Bracket | 1 |
A1-3-5 Fork Lift, 1.2cu.Yd., 6in1 Shovel Mounted
| 10***17 | Pin, Pivot | 2 |
| 12***23 | Bracket, Fork Link | 2 |
| 13***18 | Bolt | 2 |
A1-1-4 Shovel, 1.5cu.Yd.
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***11 | Boss | 4 |
A1-3-7 Fork Lift, Gp Shovel, Standard
| 10***17 | Pin, Pivot | 2 |
| 13***18 | Bolt | 2 |
| 13***8Z | Bolt | 2 |
A1-2-5 Shovel, Clam, 6 In 1, 1.1cu.Yd., 2260mm (7'5") Wide
| 10***04 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 2 |
| 10***28 | Pin, Pivot 44.4mm Dia, 213mm Long | 2 |
A1-2-2 Shovel, Clam, 6 In 1, 1.2cu.Yd., 2438mm (8'0") Wide
| 10***06 | Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
A1-3-6 Fork Lift, Gp Shovel, Long Lip Build
| 10***17 | Pin, Pivot | 2 |
| 12***22 | Bracket, Fork Lift | 2 |
| 13***18 | Bolt | 2 |
A1-3-3 Fork Lift, 1.2cu.Yd., 6in1 Shovel Mounted
| 12***00 | Fork, Shovel Mounted | 1 |
| 12***00 | Fork | 2 |
| 12***00 | Bracket | 1 |
A1-1-3 Shovel, Long Lip, Optional
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 2 |
| 10***32 | Pin, Pivot | 2 |
| 10***11 | Boss | 4 |
A1-4-2 Crane Jib, Machine Mounted
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 4 |
| 13***22 | Bolt | 4 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 4 |
A2-2-1 Blade, Back Fill
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-1-1 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***01 | Nut | 6 |
A2-4-1 Bucket, Jaw, 460mm W, Ide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-4-1 Bucket, Jaw, 600mm W, Ide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-5-1 Attachments, Jaw Bucket
| 10***48 | Pin, Pivot | 1 |
| 13***14 | Bolt | 6 |
| 13***4Z | Bolt, 3/8"Unf X 2" | 6 |
A2-2-1 Bucket, Tapered Ditc, Hing
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-1-2 Bucket, Standard
| 10***04 | Boss, Pivot | 4 |
| 13***14 | Bolt | 6 |
| 13***01 | Nut | 6 |
A2-7-2 Quickhitch, Attachment, Backhoe
| 12***18 | Hook | 1 |
| 12***19 | Plate, Retaining | 1 |
| 12***21 | Pin, Locking | 1 |
A2-2-1 Bucket, Square Hole
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-7-1 Quickhitch, Attachment, Backhoe
| 12***18 | Hook | 1 |
| 12***19 | Plate, Retaining | 1 |
| 12***21 | Pin, Locking | 1 |
A2-3-1 Blade, Ditch Cleaning
| 13***12 | Bolt | 3 |
| 13***1Z | Nut | 0 |
| 13***03 | Nut | 3 |
A2-4-2 Bucket, Jaw, 305mm Wide
| 10***18 | Pin, Pivot | 1 |
| 10***19 | Pin, Pivot | 1 |
| 10***53 | Pin, Pivot; See Note 1. Fit/Funct M/C M585376, Pin, Pivot | 1 |
A2-2-1 Tooth, Ripper
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-6-1 Bucket, Big Thumb Cribbing, Optional
| 13***13 | Bolt | 1 |
| 13***30 | Bolt, Long | 1 |
| 13***03 | Nut | 1 |
A2-3-3 Blade, Grading 6'
| 13***1Z | Nut | 8 |
| 14***11 | Washer | 8 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A2-2-1 Bucket, Clay
| 10***56 | Pin, Pivot | 3 |
| 10***00 | Lever | 1 |
| 10***00 | Link | 1 |
A2-3-2 Blade, Grading 5'
| 13***1Z | Nut | 6 |
| 14***11 | Washer | 6 |
| 14***02 | Nipple, Grease, Straight, 1/4 | 4 |
A3-8-1 Breaker, Brh 125 Kit, Centremount Machines
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 61***00 | Hose, 1/2" Bsp 2410mm Long | 1 |
A3-5-2 Breaker, Brh 125, With Side Plates, Standard
| 10***51 | Spacer | 2 |
| 12***00 | Kit-Installation, Brh125 Breaker | 1 |
| 12***00 | Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., Plate, Side; Part Is Mss Use The Following Parts 12***54, 1 Off, 12***55 1 Off., For Use On Normal Backhoe. Part Is Mss Use The Following Parts Marked B , Ie 1 Left Hand, 1 Right Hand Plate. | 1 |
A3-1-2 Roadbreaker, Installation, With Hose Reel & Carrier, Optional
| 10***06 | Lock; Supply 12***71 | 1 |
| 11***09 | Washer | 3 |
| 12***00 | Pipe | 1 |
A3-8-2 Breaker, Brh 250 Kit, Centremount Machines
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 61***00 | Hose, 1/2" Bsp 2410mm Long | 1 |
A3-5-3 Breaker, Brh 125
| 90***00 | Breaker, Hydraulic | 1 |
| 90***01 | Screw | 10 |
| 90***02 | Accumulator, Assembly | 1 |
A3-5-4 Breaker, Brh 250
| 12***87 | Bracket, Carrier | 1 |
| 16***18 | Adapter | 1 |
| 81***14 | Adapter | 1 |
A3-5-5 Breaker, Brh 125, With Side Plates, Universal
| 10***51 | Spacer | 2 |
| 13***52 | Bolt | 6 |
| 13***01 | Nut | 6 |
A3-1-3 Roadbreaker, Installation, Without Hose Reel, Optional
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 33***50 | Hose, 9144mm (30ft.) | 2 |
| 33***55 | Hose, 15340mm (50ft.) | 2 |
B Bodywork, Cab, Loader End
B1-6-4 Grille, Front, Sides, Hift
| 12***00 | Grille | 1 |
| 12***00 | Grille, Chaff Guard, Optional | 1 |
| 12***28 | Grille; Mss Part Use The Following 12***24, X 1,817, /02548 X 1, 82***45 X 3, 82***67 X 3 | 1 |
B1-5-1 Bonnet
| 12***00 | Hinge, Assemble | 2 |
| 12***01 | Stay | 1 |
| 12***00 | Latch, Claw | 1 |
B1-1-8 Mainframe
| 12***00 | Leg, Outer, Right Hand | 3 |
| 12***06 | Mounting, Axle | 5 |
| 12***00 | Leg, Outer, Left Hand | 3 |
B1-9-1 Pads, Street, Reversable, Stabiliser, Centremount, Optional
| 13***16 | Screw | 2 |
| 13***03 | Nut | 2 |
| 13***3Z | Nut | 2 |
B1-6-2 Counterweight, Front, Grille, Centremount
| 12***01 | Bumper, Front, Cast (450 Lb./205kg) | 1 |
| 12***2P | Insert | 1 |
| 12***03 | Bumper, Front, Cast (450lb./205 Kg) | 1 |
B1-3-2 Tank, Diesel Fuel, Fittings
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***02 | Strainer | 1 |
| 12***01 | Cover | 1 |
B1-2-1 Tank, Hydraulic, Fittings
| 12***05 | Indicator | 1 |
| 12***00 | Cover | 1 |
| 12***01 | Cover | 1 |
B1-6-1 Grille, Front, Centr, Emount
| 12***02 | Guard, Mesh | 1 |
| 12***06 | Spacer | 4 |
| 12***07 | Plate | 1 |
B1-6-3 Counterweight, Front, Grille, Sideshift
| 12***01 | Counterweight | 1 |
| 12***00 | Grille | 1 |
| 12***00 | Grille, Chaff Guard, Optional | 1 |
B1-5-2 Bonnet
| 12***00 | Latch, Claw | 1 |
| 12***00 | Bonnet, Access | 1 |
| 12***00 | Bonnet, Fixed, Naturally Aspirated | 1 |
B1-7-3 Step With Toolbox, Optional
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***00 | Step, Toolbox | 1 |
| 12***00 | Bracket | 1 |
B1-4-1 Stabiliser, Sideshift
| 10***10 | Pin, Pivot | 1 |
| 10***37 | Pin, Pivot | 2 |
| 10***02 | Foot; Replaced By 12***66, See San04389 | 2 |
B1-3-1 Tank, Diesel Fuel, Fittings
| 12***01 | Strainer | 1 |
| 12***01 | Cover | 1 |
| 12***00 | Tube, Filler | 1 |
B1-7-1 Step, Cab Access
| 11***09 | Washer | 4 |
| 12***01 | Spacer | 2 |
| 12***00 | Step, Single | 2 |
B1-6-3 Counterweight, Front, Grille, Centremount
| 12***01 | Counterweight | 1 |
| 12***00 | Grille | 1 |
| 12***00 | Grille, Chaff Guard, Optional | 1 |
B1-6-2 Counterweight, Front, Grille, Sideshift
| 12***01 | Bumper, Front, Cast (450 Lb./205kg) | 1 |
| 12***2P | Insert | 1 |
| 12***03 | Bumper, Front, Cast (450lb./205 Kg) | 1 |
B1-6-1 Grille, Front, Sides, Hift
| 12***02 | Guard, Mesh | 1 |
| 12***06 | Spacer | 4 |
| 12***07 | Plate | 1 |
B1-4-3 Stabiliser, Centremount
| 10***30 | Pin, Pivot | 2 |
| 10***04 | Collar | 2 |
| 12***01 | Foot, Rubber | 2 |
B1-6-4 Grille, Front, Centr, Emount
| 12***00 | Grille | 1 |
| 12***00 | Grille, Chaff Guard, Optional | 1 |
| 12***28 | Grille; Mss Part Use The Following 12***24, X 1,817, /02548 X 1, 82***45 X 3, 82***67 X 3 | 1 |
B2-3-6 Cab Shell, Unglazed, Jaw Type, Loose Pin Door Hinge
| 12***05 | Bolt, Closing | 2 |
| 12***00 | Roof | 1 |
| 12***76 | Stay, Door, Lh | 1 |
B2-5-3 Seat With Riser, Sta, Ndard
| 12***10 | Cushion, Brown, Vinyl | 1 |
| 12***11 | Cushion, Brown, Vinyl | 1 |
| 12***00 | Lever | 1 |
B2-1-2 Cab Base
| 10***06 | Lock; Supply 12***71 | 1 |
| 12***02 | Plate, Compression | 8 |
| 12***03 | Mounting, Cab, Rubber; Use 26***05, San 04452 | 4 |
B2-3-5 Cab Shell, Unglazed, Post Type, Welded Pin Door Hinge
| 12***05 | Bolt, Closing | 2 |
| 12***00 | Roof | 1 |
| 12***01 | Bracket | 2 |
B2-8-3 Window, Side, All Glass, Jaw Type Locating Hinge
| 12***07 | Washer, Mounting | 4 |
| 12***09 | Cap, Nut M8; Replaces 69***72 | 7 |
| 12***10 | Handle, Left Hand, (Marked S) | 1 |
B2-8-1 Window, Side, Metal Frame
| 12***00 | Frame, Side Window, Left Hand | 1 |
| 12***00 | Frame, Side Window, Right Hand | 1 |
| 12***08 | Bush, Hinge | 2 |
B2-9-1 Window, Rear, Metal Frame
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 12***02 | Handle, Left Hand | 1 |
| 12***00 | Handle | 1 |
B2-7-3 Door, All Glass, Jaw Type, Loose Pin, Door Hinge
| 12***07 | Knob, Interior | 1 |
| 12***00 | Lock, Door, Left Hand | 1 |
| 12***00 | Lock, Door, Right Hand | 1 |
B2-7-2 Door, All Glass, Post Type, Welded Pin, Door Hinge
| 12***06 | Strut, Gas | 1 |
| 12***07 | Knob, Interior | 1 |
| 12***08 | Bush, Hinge | 2 |
B2-2-4 Cab Glazing
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***01 | Lining, Roof | 1 |
| 12***03 | Seal | 2 |
B2-8-2 Window, Side, All Glass, Post Type, Welded Pin Door Hinge
| 12***08 | Bush, Hinge | 1 |
| 12***02 | Hinge, Top, Lh | 1 |
| 12***03 | Hinge, Top, Rh | 1 |
B2-5-9 Seat, Standard
| 12***14 | Spacer | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***7Z | Bolt, M10x25 | 4 |
B2-5-7 Seat Riser, Standard
| 40***01 | Damper | 1 |
| 40***10 | Bracket | 1 |
| 40***11 | Lever | 1 |
B2-5-4 Seat With Riser, Opt, Ional
| 12***00 | Seat, Complete, Low Back | 1 |
| 12***14 | Spacer | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
B2-3-2 Canopy
| 10***00 | Mirror, Interior; Cwe By 12***71 - See San 10750 | 1 |
| 12***00 | Plate, Front | 1 |
| 12***00 | Plate, Rear | 1 |
B2-5-4 Seat With Riser, Sta, Ndard
| 12***00 | Seat, Complete, Low Back | 1 |
| 12***14 | Spacer | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
B2-6-3 Soundproofing, Engine
| 12***03 | Mat, Left Hand | 1 |
| 12***04 | Mat, Right Hand | 1 |
| 12***01 | Panel, Engine, Left Hand, Yellow | 1 |
B2-1-3 Soundproofing, Cab Base
| 12***08 | Cover, Brown | 2 |
| 12***11 | Mat, Brown | 1 |
| 12***01 | Strap | 2 |
B2-7-1 Door, Metal Frame, Post Type, Welded Pin, Door Hinge
| 12***00 | Door, Side, Lh | 1 |
| 12***00 | Door, Side, Rh | 1 |
| 12***04 | Cover, L.H. | 1 |
B2-4-1 Wash/Wipe, Windscreen
| 12***00 | Pump, And Reservoir | 1 |
| 12***01 | Jet | 1 |
| 12***00 | Pump, And Reservoir | 1 |
B2-5-7 Seat Riser, Optional
| 40***01 | Damper | 1 |
| 40***10 | Bracket | 1 |
| 40***11 | Lever | 1 |
B3-2-2 Arms, Loader, Parallel Lift
| 10***15 | Pin, Pivot, 165mm Long | 2 |
| 10***26 | Pin, Pivot | 8 |
| 12***00 | Arm | 1 |
B3-2-1 Arms, Loader, Parallel Lift
| 10***15 | Pin, Pivot, 165mm Long | 2 |
| 10***21 | Pin, Pivot | 2 |
| 10***26 | Pin, Pivot | 8 |
B3-2-3 Arms, Loader, Parallel Lift
| 10***15 | Pin, Pivot, 165mm Long | 2 |
| 10***26 | Pin, Pivot | 6 |
| 12***00 | Arm | 1 |
B4-6-2 Dipper (Stick), Extending
| 10***32 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-6-1 Dipper (Stick), Extending
| 10***25 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-3-2 Kingpost, Centremount
| 10***16 | Pin, Pivot | 1 |
| 11***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-2-2 Slew/Swing, Componen, Ts, Sideshift
| 12***00 | Plate | 1 |
| 12***04 | Spacer | 2 |
| 12***06 | Damper | 2 |
B4-7-1 Knuckle, Boom Pivot
| 12***14 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***01 | Spacer | 2 |
B4-1-4 Kingpost Carriage, C, Entremount
| 12***05 | Pin, Lock | 4 |
| 12***7P | Plate | 4 |
| 12***1P | Block | 4 |
B4-4-1 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 12***02 | Pivot, Boom Nose End, Casting | 1 |
B4-3-3 Kingpost, Centremount
| 10***12 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 1 |
| 11***01 | Collar | 1 |
B4-4-8 Boom
| 10***30 | Pin, Pivot | 1 |
| 10***43 | Pin, Pivot | 1 |
| 12***02 | Pivot, Boom Ram Eye End, Casting | 1 |
B4-4-7 Boom
| 10***30 | Pin, Pivot | 1 |
| 10***42 | Pin, Pivot | 1 |
| 12***01 | Pivot, Boom Nose End, Casting | 1 |
B4-5-5 Dipper (Stick), Standard
| 10***38 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***23 | Pin, Pivot | 1 |
B4-4-2 Boom
| 10***32 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 12***02 | Pivot, Boom Nose End, Casting | 1 |
B4-3-4 Kingpost, Centremount
| 10***12 | Pin, Pivot | 2 |
| 10***18 | Pin, Pivot | 1 |
| 10***01 | Collar | 1 |
B4-2-2 Slew/Swing, Componen, Ts, Centremount
| 12***00 | Plate | 1 |
| 12***04 | Spacer | 2 |
| 12***06 | Damper | 2 |
B4-6-6 Dipper (Stick), Extending
| 10***21 | Pin, Pivot | 1 |
| 10***26 | Pin, Pivot | 1 |
| 10***38 | Pin, Pivot | 1 |
B4-3-1 Kingpost, Sideshift
| 10***16 | Pin, Pivot | 1 |
| 10***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B4-5-3 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***43 | Pin, Pivot | 1 |
B4-4-3 Boom
| 10***16 | Pin, Pivot | 1 |
| 10***30 | Pin, Pivot | 1 |
| 12***01 | Lock, Slew | 1 |
B4-6-5 Dipper (Stick), Extending
| 10***26 | Pin, Pivot | 1 |
| 10***38 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-4-4 Boom
| 10***23 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 12***01 | Pivot, Boom Nose End, Casting | 1 |
B4-4-5 Boom
| 10***23 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
| 12***01 | Pivot, Boom Nose End, Casting | 1 |
B4-6-4 Dipper (Stick), Extending
| 10***26 | Pin, Pivot | 1 |
| 10***38 | Pin, Pivot | 1 |
| 10***40 | Pin, Pivot | 1 |
B4-5-2 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-2-3 Slew/Swing, Components, Centremount
| 12***01 | Plate | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Plate, Support | 1 |
B4-6-3 Dipper (Stick), Extending
| 10***26 | Pin, Pivot | 1 |
| 10***38 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
B4-5-1 Dipper (Stick), Standard
| 10***47 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***33 | Pin, Pivot | 1 |
B4-4-6 Boom, Knuckle
| 10***18 | Pin, Pivot | 1 |
| 12***00 | Boom, 2200 | 1 |
| 12***01 | Lock, Slew | 1 |
B4-1-4 Kingpost Carriage, S, Ideshift
| 12***05 | Pin, Lock | 4 |
| 12***7P | Plate | 4 |
| 12***1P | Block | 4 |
B4-5-4 Dipper (Stick), Knuckle
| 10***37 | Pin, Pivot | 1 |
| 10***59 | Pin, Pivot | 1 |
| 10***49 | Pin, Pivot | 1 |
B4-3-1 Kingpost, Centremoun, T
| 10***16 | Pin, Pivot | 1 |
| 10***01 | Collar | 1 |
| 12***09 | Breather | 1 |
B5-3-1 Tool Kit, Supplementary
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
| 82***05 | Spanner, 11/16" X 3/4" A/F, D.O.E. | 1 |
B5-4-1 Fire Extinguisher
| 13***2Z | Nut | 2 |
| 14***05 | Screw, Self Tapping | 2 |
| 25***00 | Extinguisher, Fire | 1 |
B5-1-1 Paint & Transfers
| 33***15 | Label, On Off, Hydraulic Tools | 1 |
| 33***22 | Label, Warning, Lights | 1 |
| 33***23 | Label, Warning, Lights | 1 |
B5-2-1 Tool Kit, Standard
| 27***00 | Bag, Tool | 1 |
| 82***02 | Spanner, 7/16" X 1/2" A/F | 1 |
| 82***04 | Spanner, Doe, 9/16" X 5/8" A/F | 1 |
B5-1-2 Decals, Excavator & Loader, Controls
| 81***77 | Decal, Breaker | 1 |
| 81***78 | Decal, Jaw | 1 |
| 81***79 | Decal, Knuckle | 1 |
C Electrics-Machine, Cab & Engine
C1-9-1 Alarm, Back Up, Optional
| 54***21 | Alarm | 1 |
| 54***22 | Transmitter | 1 |
| 54***36 | Adapter | 1 |
C1-1-2 Electrical Equipment, Cab
| 12***01 | Bracket | 2 |
| 14***1Z | Washer | 4 |
| 14***07 | Washer | 2 |
C1-3-1 Light, Head, Working
| 70***00 | Body | 2 |
| 70***00 | Light, Sealed, Right Hand Dip | 2 |
| 70***00 | Light, Working | 2 |
C1-5-1 Pump, Diesel, Refuelling
| 12***00 | Kit-Refuelling Pump; Replaced By 12***01, 12***02, 64***01,, 70***01 | 1 |
| 12***01 | Pump, 12v,Refuel | 1 |
| 12***02 | Diesel Pump Bag | 1 |
C1-1-1 Electrical Equipment, Cab
| 12***01 | Bracket | 2 |
| 12***01 | Cover, Front And Rear | 2 |
| 14***1Z | Washer | 4 |
C1-2-2 Light, Side, Front & Rear
| 10***01 | Spring, 24" Bungy | 1 |
| 12***00 | Bracket | 2 |
| 12***00 | Bracket, Left Hand | 1 |
C2-4-7 Alternator, A127-55amp 12.Volt
| 02***07 | Pulley, Alternator; Part N/A Use 1 Off Each 02/10***12 & 02/10***13 | 1 |
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***13 | Spacer | 1 |
C2-5-3 Motor, Starter, M127 12.Volt
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Nut | 3 |
C2-9-1 Air Conditioning, Installation
C2-4-8 Alternator, A127-65amp 12.Volt, Optional
| 02***12 | Pulley, Single, D=83mm; Not Included In Assembly. Must Be Used With Spacer 02/10***13., Pulley, Single, D=83mm | 1 |
| 02***13 | Spacer | 1 |
| 71***01 | Capacitor, Suppression | 1 |
C2-1-1 Electrics, Engine
| 02***23 | Switch, Oil Pressure | 1 |
| 04***99 | Switch, Neutral Start | 1 |
| 04***03 | Switch, Neutral Start | 1 |
C2-4-6 Alternator, A127-45amp 12.Volt
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***03 | Bracket, Slip Ring End | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
C2-6-5 Heater, Installation
| 12***01 | Tap | 1 |
| 12***08 | Duct | 1 |
| 12***13 | Pipe, Outlet, Flanged | 1 |
C2-3-3 Alternator Mountings, Lj Build
| 02***76 | Spacer | 1 |
| 02***92 | Washer | 3 |
| 02***43 | Bracket, Alternator Mounting | 1 |
C2-8-1 Installation, Reverse Alarm, Optional
| 13***2Z | Nut | 1 |
| 14***4Z | Washer, Star | 1 |
| 70***00 | Switch | 1 |
C2-6-6 Heater, Installation, Optional
| 12***02 | Plug | 1 |
| 12***01 | Handle | 1 |
| 12***02 | Tap | 1 |
C2-3-2 Alternator Mountings, Lh Build
| 02***74 | Bracket, Alternator Support | 1 |
| 02***76 | Spacer | 1 |
| 02***77 | Bush | 2 |
C2-4-3 Alternator, A127-65amp 12.Volt, Optional
| 70***00 | Lead; Alternator To Solenoid. Not Illustrated - Important Must Be Fitted When Installing This Option., Lead; Alternator To Solenoid. For Use With 65amp High Output Alternator Only., Lead; Alternator To Solenoid. For Use With 65amp High Output Alternator., Lead; Alternator To Solenoid. Important Must Be Fitted When Installing This Option., Lead, Lead; Alternator To Solenoid. For Use With (Optional) 65amp High Output Alternator., Lead; Alternator To Solenoid. Must Be Fitted When Installing This Option., Lead; Alternator To Solenoid. For Use With (Optional) 65amp Hihg Output Alternator., Lead; Alternator To Solenoid. For Use With 65amp High Output Alternator Only | 1 |
| 71***00 | Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator; Lucas Ref.24158. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator, Alternator; Lucas Ref. 24158. Type Of Alternator Best Identified By Lucas Ref, Stamped On Body. | 1 |
| 71***01 | Capacitor, Suppression | 1 |
C2-6-3 Heater, Installation
| 11***03 | Tap | 1 |
| 12***01 | Strap | 1 |
| 12***03 | Elbow; Nsp, See San 11129 | 1 |
C2-5-1 Motor, Starter, M 50 12.Volt
| 12***06 | Cover, Solenoid | 1 |
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***1Z | Nut | 3 |
C2-4-2 Alternator, A115-45amp 12.Volt
| 71***06 | Kit-Bearing, Drive End | 1 |
| 71***00 | Alternator; Lucas Ref 24037. Type Of Alternator Best Identified By Lucas Ref.Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref. Stamped On Tag At Pulley End., Alternator; Lucas Ref. 24037. Type Of Alternator Best Identified By Lucas Ref,Stamped On Body., Alternator; Lucas Ref.24037. Type Of Alternator Best Identified By Lucas Ref Stamped On Body., Alternator | 1 |
| 71***01 | Cover | 1 |
C2-3-4 Alternator Mountings, Ld Build
| 02***11 | Washer | 1 |
| 02***18 | Spacer | 1 |
| 02***01 | Lever, Alternator Adjusting | 1 |
C2-2-1 Battery & Carrier
| 10***00 | Clamp | 1 |
| 12***02 | Tray | 1 |
| 12***03 | Cover, Protection | 1 |
C3-2-3 Instrument Panel
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 3 |
| 12***00 | Panel, Instrument | 1 |
| 12***02 | Cover, Fuse Box | 1 |
C3-4-1 Instrument Cluster
| 70***01 | Bracket | 2 |
| 70***02 | Washer | 5 |
| 70***03 | Bezel | 1 |
C3-5-1 Switch, Column
| 12***00 | Lock, Lever | 1 |
| 12***00 | Lock, Lever | 1 |
| 13***3Z | Capscrew | 2 |
C3-2-2 Instrument Panel
| 12***05 | Cover | 1 |
| 12***06 | Cover | 1 |
| 12***01 | Cowling | 1 |
C3-3-2 Cover, Vandle Proof, Instrument Panel
| 54***71 | Kit-Vandal Cover | 1 |
| 54***72 | Cover | 1 |
| 54***73 | Cover | 1 |
C3-1-1 Switch, Column
| 12***12 | Cover | 1 |
| 12***13 | Cover | 1 |
| 12***01 | Cover | 1 |
C3-6-1 Installation, Gauge Package, Optional
| 10***06 | Lock; Supply 12***71 | 1 |
| 20***09 | Nut, 1/8"Bspt | 2 |
| 54***19 | Kit-Instrument Panel | 1 |
C3-2-4 Instrument Panel
| 12***52 | Cover, Brake Reservior | 1 |
| 12***54 | Panel, Intrument | 1 |
| 12***57 | Bracket, Relay | 1 |
D Controls-Machine
D1-9-1 Control Knob, Loader Valve
| 12***59 | Ring, Tolerance | 1 |
| 12***16 | Base, Control Knob | 1 |
| 12***17 | Top, Control Knob | 1 |
D1-3-4 Control, Foot Pedal, Auxiliary Valve, Extending Dipper
| 12***02 | Plate | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Lever | 1 |
D1-7-2 Controls, Excavator, Ford System
| 12***02 | Rod, Excavator | 4 |
| 12***06 | Cover | 1 |
| 12***01 | Knob | 4 |
D1-3-5 Control, Foot Pedal, Auxiliary Valve, Big Thumb Option
| 12***01 | Bar, Locking | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Lever | 1 |
D1-1-3 Controls, Loader Valve
| 10***01 | Knob, Large Dia. | 1 |
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
D1-3-2 Control, Foot Pedal, Auxiliary Valve, Extending Dipper & Breaker
| 12***01 | Bar, Locking | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Lever | 1 |
D1-8-1 Lever Lock, In Cab, Slew, Swing, & Boom Locking.
| 12***00 | Reservoir | 1 |
| 12***01 | Lock, Slew/Swing, Side Shift | 1 |
| 12***30 | Rod, Push | 1 |
D1-4-1 Installation, Shovel Reset
| 12***00 | Bracket | 1 |
| 12***01 | Bar | 1 |
| 12***02 | Bracket, Saddle | 2 |
D1-1-5 Controls, Loader Valve
| 10***06 | Joint, Ball | 1 |
| 12***01 | Rod | 1 |
| 12***01 | Plate | 1 |
D1-7-3 Controls, Excavator, Case System, 3 & 4 Lever With Foot Swing
| 12***02 | Rod, Excavator | 4 |
| 12***06 | Cover | 1 |
| 12***02 | Knob, Controls, Yellow | 2 |
D1-3-6 Control, Foot Pedal, Auxiliary Valve, Extending Dipper
| 12***00 | Bracket | 1 |
| 12***50 | Link | 1 |
| 12***51 | Bar, Locking | 1 |
D1-3-3 Control, Foot Pedal, Auxiliary Valve, 7 Spool Excavator Valve
| 12***01 | Bar, Locking | 1 |
| 12***02 | Plate | 1 |
| 12***00 | Bracket | 1 |
D1-1-6 Controls, Loader Valve
| 10***06 | Joint, Ball | 1 |
| 12***01 | Plate | 1 |
| 12***05 | Pin, Pivot | 1 |
D1-2-3 Controls, Excavator
| 10***01 | Knob, Large Dia. | 2 |
| 10***06 | Joint, Ball | 2 |
| 12***02 | Band, Retaining | 1 |
D1-2-5 Controls, Excavator
| 10***06 | Joint, Ball | 2 |
| 12***02 | Rod, Excavator | 4 |
| 12***00 | Lever | 1 |
D2-2-2 Control, Parking Brake
| 12***03 | Gaiter, Brake Lever | 1 |
| 12***66 | Bracket | 1 |
| 12***04 | Gaiter, Brake Lever | 1 |
D2-2-1 Control, Parking Brake
| 12***05 | Bracket | 1 |
| 12***03 | Gaiter, Brake Lever | 1 |
| 12***04 | Gaiter, Brake Lever | 1 |
D2-1-1 Control Pedal, Brake
| 12***04 | Pin, Pivot | 1 |
| 12***01 | Plate, Lock | 1 |
| 12***00 | Lever, Forward Reverse | 1 |
D3-2-3 Control, 2/4wd Selec, Tor
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-4 Controls, Forward &, Reverse
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-1 Control, Selector
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-1-5 Controls, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Bracket | 1 |
D3-3-1 Control, 2/4wd Selector
| 12***02 | Bracket | 1 |
| 12***02 | Washer | 1 |
| 12***1P | Bracket | 1 |
D3-2-3 Controls, Transmissi, On Dump
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-2 Controls, Transmissi, On Dump
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-5 Controls, Transmissi, On Dump
| 12***00 | Pedal, Dump | 1 |
| 12***12 | Plate, Switch Mounting | 1 |
| 12***00 | Bracket | 1 |
D3-2-2 Controls, Forward &, Reverse
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-1 Controls, Forward &, Reverse
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-2 Control, 2/4wd Selec, Tor
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-3 Controls, Forward &, Reverse
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-2-4 Controls, Transmissi, On Dump
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
D3-1-3 Controls, Throttle & Stop
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 12***00 | Pedal, Throtle Control | 1 |
D3-3-2 Control, 2/4wd Selector
| 12***21 | Cover | 1 |
| 12***03 | Knob, Yellow | 1 |
| 12***7P | Bracket, 2wd/4wd Cable, Control | 1 |
D3-2-1 Controls, Transmissi, On Dump
| 12***1P | Bracket | 1 |
| 12***02 | Bracket | 1 |
| 12***03 | Pin | 1 |
E Hydraulics
E1-1-5 Circuit, Neutral, Single Pump, Brh125 Breaker
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-8-1 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Restrictor | 1 |
E1-8-2 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
E1-6-2 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-15 Circuit, Auxiliary, Valve To Kingpost
| 12***00 | Pipe, Auxiliary Valve | 1 |
| 12***00 | Pipe, Auxiliary Valve | 1 |
| 13***10 | Bolt | 2 |
E1-1-7 Circuit, Neutral, Twin Pump, Brh250 Breaker, Extradig Dipper
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-4-8 Circuit, Excavator, Valve To Kingpost, Jcb Controls, Sideshift 8'
| 12***00 | Cluster, Pipe, Jcb Controls | 1 |
| 12***00 | Base, Clamp, Standard | 1 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-8-4 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 2 |
| 12***00 | Pipe | 1 |
| 13***4Z | Bolt, 3/8" | 2 |
E1-5-9 Circuit, Backhoe, Standard Dipper, Centremount, Sideshift
| 12***00 | Pipe | 1 |
| 13***3Z | Nut | 2 |
| 13***4Z | Nut | 2 |
E1-2-4 Circuit, Loader Arm, Standard
| 12***00 | Pipe, Assembly | 1 |
| 12***00 | Pipe, Assembly | 1 |
| 12***00 | Pipe, Assembly | 1 |
E1-12-1 Circuit, Roadbreaker, Single
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***22 | Adapter | 1 |
| 16***04 | Adapter, Male/Female | 1 |
E1-9-4 Circuit, Auxiliary, Breaker Brh250, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Guide | 1 |
| 12***00 | Pipe | 1 |
E1-9-6 Circuit, Auxiliary, Breaker Brh125, Standard Dipper, Centremount
| 12***07 | Guide | 1 |
| 12***00 | Pipe | 1 |
| 12***01 | Pad | 1 |
E1-1-9 Circuit, Neutral, Auxiliary
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***09 | Adapter, Reducing | 3 |
| 22***12 | Clip, Jubilee | 4 |
E1-13-1 Clamps, Hose, Neutral Circuit
| 12***62 | Bracket | 1 |
| 13***8Z | Bolt | 8 |
| 13***3Z | Nut | 7 |
E1-6-4 Circuit, Auxiliary, Backhoe, Standard Dipper, Centremount
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-5-10 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***4Z | Nut | 2 |
E1-4-14 Circuit, Excavator, Valve To Kingpost, Jcb Controls, Centremount
| 12***40 | Pipe, Cluster | 1 |
| 12***00 | Pipe, Right Hand, Slew Ram | 1 |
| 12***00 | Pipe, Left Hand, Slew Ram | 1 |
E1-7-2 Circuit, Hydraclamp, Sideshift
| 12***05 | Pin, Lock | 4 |
| 12***01 | Housing | 4 |
| 12***00 | Bracket, Support | 1 |
E1-1-1 Circuit, Neutral, Single Pump, Standard Build
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-9-5 Circuit, Auxiliary, Breaker Brh125, Extradig Dipper, Sideshift
| 12***00 | Guide | 1 |
| 12***00 | Pipe | 1 |
| 12***01 | Pad | 1 |
E1-1-2 Circuit, Neutral, Twin Pump, Extradig Dipper, Roadbreaker
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-5-2 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***03 | Nut | 2 |
| 13***3Z | Nut | 2 |
E1-1-8 Circuit, Neutral, Twin Pump, Standard
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
| 16***09 | Adapter, Reducing | 3 |
| 22***12 | Clip, Jubilee | 4 |
E1-5-6 Circuit, Backhoe, Knuckle Dipper, Centremount
| 12***01 | Plate, Mounting | 1 |
| 13***3Z | Nut | 2 |
| 61***00 | Hose | 4 |
E1-9-7 Circuit, Auxiliary, Breaker Brh250, Standard Dipper, Centremount
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***01 | Pad | 1 |
E1-6-1 Circuit, Auxiliary, Backhoe, Standard Dipper, Sideshift
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-6-10 Circuit, Auxiliary, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***01 | Guide | 2 |
E1-14-1 Circuit, Inline Relief Valve, Bucket Ram, Breaker
| 13***18 | Bolt | 0 |
| 13***3Z | Nut, 5/16" Unf | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E1-8-9 Circuit, Backhoe, Extradig Dipper, Centremount, Sideshift
| 12***00 | Pipe, Left Hand | 1 |
| 12***00 | Pipe, Right Hand | 1 |
| 12***00 | Pipe | 1 |
E1-5-7 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 13***4Z | Bolt, 3/8" | 2 |
| 61***00 | Hose, 1/4"Bsp 1370mm | 4 |
E1-8-3 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 13***4Z | Bolt, 3/8" | 2 |
E1-6-9 Circuit, Auxiliary, Backhoe, Standard Dipper, Centremount
| 12***07 | Guide | 2 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-5-1 Circuit, Backhoe, Standard Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 13***3Z | Nut | 2 |
| 61***00 | Hose | 2 |
E1-5-5 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***3Z | Nut | 2 |
E1-12-2 Circuit, Roadbreaker, Twin
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 16***04 | Adapter, Male/Male | 1 |
| 16***22 | Adapter | 1 |
E1-8-10 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe, Left Hand | 1 |
| 12***00 | Pipe, Right Hand | 1 |
E1-3-4 Circuit, Auxiliary, Loader Arm, Optional
| 13***8Z | Bolt | 2 |
| 13***08 | Bolt | 2 |
| 13***2Z | Bolt | 1 |
E1-9-3 Circuit, Auxiliary, Breaker Brh125, Standard Dipper, Sideshift
| 12***07 | Guide | 1 |
| 12***00 | Guide | 1 |
| 12***00 | Pipe | 1 |
E1-8-6 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Pipe, Left Hand | 1 |
E1-8-5 Circuit, Backhoe, Extradig Dipper, Sideshift
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 2 |
| 12***00 | Pipe, Left Hand | 1 |
E1-4-13 Circuit, Excavator, Valve To Kingpost, Jcb Controls, Centremount
| 12***00 | Pipe, Right Hand, Slew Ram | 1 |
| 12***00 | Pipe, Left Hand, Slew Ram | 1 |
| 12***00 | Pipe, Cluster | 1 |
E1-4-7 Circuit, Excavator, Valve To Kingpost, Jcb Controls, Sideshift 7'4"
| 12***00 | Cluster, Pipe, Jcb Controls | 1 |
| 12***00 | Base, Clamp, Standard | 1 |
| 12***00 | Clamp, Base, Standard & Auxiliary. | 1 |
E1-8-7 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe, Left Hand | 1 |
| 12***00 | Pipe, Right Hand | 1 |
E1-5-3 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 13***3Z | Nut | 4 |
| 61***00 | Hose | 2 |
E1-12-3 Circuit, Roadbreaker, Single
| 12***00 | Pipe, Cluster | 1 |
| 13***8Z | Bolt | 2 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 1 |
E1-12-4 Circuit, Roadbreaker, Twin
| 12***00 | Pipe, Cluster | 1 |
| 13***8Z | Bolt | 2 |
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 1 |
E1-5-11 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 13***4Z | Bolt, 3/8" | 2 |
| 13***4Z | Nut | 2 |
E1-1-6 Circuit, Neutral, Twin Pump, Brh250 Breaker
| 12***00 | Bracket | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
E1-5-4 Circuit, Backhoe, Standard Dipper, Centremount
| 12***00 | Pipe | 1 |
| 13***3Z | Nut | 4 |
| 61***00 | Hose | 2 |
E1-8-11 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe, Left Hand | 1 |
| 12***00 | Pipe, Right Hand | 1 |
E1-8-8 Circuit, Backhoe, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***00 | Pipe | 1 |
| 12***00 | Pipe, Left Hand | 1 |
E1-11-1 Circuit, Big Thumb, Optional
| 13***30 | Bolt | 2 |
| 13***03 | Nut | 2 |
| 54***17 | Valve | 1 |
E1-6-3 Circuit, Auxiliary, Backhoe, Standard Dipper, Centremount
| 12***07 | Guide | 2 |
| 12***00 | Pipe, Assembly | 1 |
| 12***00 | Pipe | 1 |
E1-9-8 Circuit, Auxiliary, Breaker Brh125, Extradig Dipper, Centremount
| 12***00 | Pipe | 1 |
| 12***01 | Pad | 1 |
| 12***00 | Pipe | 1 |
E2-1-1 Pump, Main Hydraulic, Single, Standard
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
E2-3-1 Shaft, Pump Drive
| 12***02 | Adapter, Drive | 1 |
| 12***08 | Adapter, Drive | 1 |
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
E2-2-1 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***14 | Bolt | 2 |
| 13***0Z | Bolt | 4 |
| 13***14 | Bolt | 2 |
E2-2-2 Pump, Main Hydraulic, Double, Standard, Extradig Dipper, Optional, Auxiliary
| 13***14 | Bolt | 2 |
| 13***0Z | Bolt | 4 |
| 13***3Z | Nut, Lock | 2 |
E3-2-3 Valve, Spool, Standard, Loader Valve
| 24***07 | O Ring | 2 |
| 25***18 | Spacer | 2 |
| 25***20 | Retainer | 2 |
E3-5-3 Valve, Assembly, Excavator
| 12***00 | Restrictor | 2 |
| 13***34 | Bolt | 1 |
| 13***36 | Bolt | 1 |
E3-2-12 Valve, Main Relief, Loader Valve
| 14***08 | Seal, Washer | 2 |
| 92***49 | Nut, Lock | 1 |
| 92***50 | Screw, Adjusting | 1 |
E3-6-2 Valve, Components, Excavator Valve
| 14***3Z | Washer | 2 |
| 24***07 | O Ring | 12 |
| 24***11 | O Ring | 7 |
E3-2-11 Valve, Main Relief, Loader Valve
| 14***08 | Seal, Washer | 2 |
| 92***91 | Spring | 1 |
| 92***37 | Valve, Poppet | 1 |
E3-2-5 Valve, Spool, Electric Detent, Loader Valve
| 24***07 | O Ring | 2 |
| 25***18 | Spacer | 2 |
| 25***20 | Retainer | 2 |
E3-2-8 Valve, Components, Loader Valve
| 24***07 | O Ring | 2 |
| 24***11 | O Ring | 1 |
| 24***17 | O Ring | 1 |
E3-8-1 Lubricants & Filters
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 32***01 | Element, Air-Safety | 1 |
E3-6-4 Valve, Rotary Clamp, Excavator Valve, Sideshift M/C'S.
| 14***11 | Seal, Bonded | 1 |
| 24***15 | O Ring | 2 |
| 92***17 | Seal | 1 |
E3-2-10 Valve, Spool, Electric Detent, Loader Valve
| 24***07 | O Ring | 2 |
| 92***78 | Bolt | 2 |
| 92***80 | Retainer, Wiper; Replaced By 92***07, See San07965 | 1 |
E3-8-2 Lubricants & Filters
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 32***01 | Element, Air-Safety | 1 |
| 32***02 | Element, Air, Primary | 1 |
E3-4-4 Valve, Foot Control, Big Thumb Bucket, Optional
| 54***12 | Valve | 1 |
| 54***13 | Kit-Seal | 1 |
| 54***14 | O Ring | 1 |
E3-1-1 Valve, Loader
| 12***01 | Mounting, Rubber | 2 |
| 13***3Z | Nut | 6 |
| 14***11 | Seal, Bonded | 1 |
E3-2-2 Valve, Relief, Check & Overload, Loader Valve
| 13***2Z | Nut | 1 |
| 24***07 | O Ring | 1 |
| 24***11 | O Ring | 2 |
E3-1-2 Valve, Loader
| 12***01 | Mounting, Rubber | 3 |
| 12***26 | Mounting, Rubber | 3 |
| 13***3Z | Nut | 6 |
E3-4-2 Valve, Components, Auxiliary Valve
| 25***02 | Valve, Section, Assembly | 1 |
| 25***03 | Kit, Seal, Intersections; Superseded By 25/40***08 Same Seals + 2 Small, Pilot Seals. See San 10911. | 2 |
| 25***05 | Washer | 6 |
E3-2-7 Valve, Main Relief, Loader Valve
| 24***06 | O Ring | 2 |
| 24***04 | O Ring | 2 |
| 25***21 | Valve, Poppet | 1 |
E3-7-2 Filter, Hydraulic
| 13***2Z | Bolt | 2 |
| 13***4Z | Nut, Philidas Thin | 2 |
| 14***2Z | Washer | 2 |
E3-7-1 Filter, Hydraulic
| 13***01 | Plug, Drain | 1 |
| 13***1Z | Nut | 2 |
| 14***11 | Seal, Bonded | 1 |
E3-3-2 Valve, Auxiliary, & Adapters
| 14***11 | Seal, Bonded | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
E3-4-3 Valve Section, Auxiliary
| 25***02 | Valve, Section, Assembly | 1 |
| 25***27 | Plate, Seal Retainer | 2 |
| 25***28 | Seal, Wiper | 2 |
E3-2-4 Valve, Spool, Mechanical Detent, Loader Valve
| 24***05 | O Ring | 1 |
| 24***20 | O Ring | 1 |
| 24***07 | O Ring | 2 |
E3-4-1 Valve, Components, Auxiliary Valve
| 13***2Z | Nut | 1 |
| 24***06 | O Ring | 2 |
| 24***16 | O Ring | 1 |
E3-2-9 Valve, Spool, Mechanical Detent, Loader Valve
| 24***07 | O Ring | 2 |
| 24***11 | O Ring | 1 |
| 92***80 | Retainer, Wiper; Replaced By 92***07, See San07965 | 2 |
E3-9-1 Valve, Unloader
| 13***4Z | Bolt, 3/8" | 1 |
| 13***2Z | Bolt, 3/8"Unf X 3" | 1 |
| 13***1Z | Nut | 1 |
E3-2-6 Valve, Relief, Loader Valve
| 13***2Z | Nut | 1 |
| 24***06 | O Ring | 1 |
| 24***07 | O Ring | 1 |
E3-3-1 Valve, Auxiliary, & Adapters
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 5 |
| 16***04 | Adapter, Male/Male | 4 |
E4-5-3 Seal Kit, Ram
| 24***10 | O Ring | 1 |
| 24***15 | O Ring | 1 |
| 24***18 | O Ring | 1 |
E4-2-6 Ram, Backhoe, 12'6"
| 12***15 | Bush | 1 |
| 12***17 | Bush | 2 |
| 12***20 | Bush | 1 |
E4-3-4 Ram, Stabiliser, Sideshift
| 55***01 | Cap, End | 1 |
| 55***00 | Ram, Stabiliser, Sideshift; Standard. X= Early Type See E4-3-1. Y= Later Type See List Below., Ram, Stabiliser, Sideshift | 1 |
| 55***00 | Cylinder, Standard | 1 |
E4-4-3 Ram, Clamshovel, 6 In 1
| 12***11 | Bush | 1 |
| 12***19 | Bush | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
E4-4-1 Ram, Extension, Extr, Adig Dipper
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 12***22 | Bush | 1 |
E4-10-1 Ram, Bucket, Big Thump, Optional
| 54***50 | Ram, Assembly, Big Thumb | 1 |
| 54***51 | Cylinder, Big Thumb Ram | 1 |
| 54***52 | Nut | 1 |
E4-8-2 Ram, Slew/Swing, Centremount
| 12***00 | Adapter, Pipe Long | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-1-5 Ram, Lift
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-2-9 Ram, Backhoe, 17'0"
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***20 | Bush | 1 |
E4-6-5 Valve, Check, Hose Burst, Boom & Dipper.
| 25***05 | Valve, Relief | 1 |
| 25***02 | Spring | 1 |
| 25***00 | Valve, Protection, Hose Burst; Replaced By 98***00 + Remove Mounting Brack, Et From Existing Ram | 1 |
E4-1-4 Ram, Lift
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 14***01 | Washer, Aluminium | 1 |
E4-2-5 Ram, Backhoe, 15'6"
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***21 | Bush | 2 |
E4-4-1 Ram, Jaw Bucket
| 12***15 | Bush | 1 |
| 12***18 | Bush | 1 |
| 12***22 | Bush | 1 |
E4-5-2 Seal Kit, Extension, Ram, Extradig Dipper
| 21***13 | Pin, Cotter, Split | 1 |
| 21***16 | Pin, Split | 1 |
| 24***26 | O Ring, 4.00in | 1 |
E4-2-7 Ram, Backhoe, 14'0"
| 12***15 | Bush | 1 |
| 12***20 | Bush | 1 |
| 12***17 | Bush | 1 |
E4-6-4 Valve, Check, Hose Burst, Stabiliser & Knuckle Ram
| 13***6Z | Bolt | 2 |
| 14***11 | Seal, Bonded | 4 |
| 14***4Z | Washer, Spring | 2 |
E4-4-4 Ram, Extension, Extradig Dipper
| 55***01 | Cap, End | 1 |
| 55***01 | Gland, Bearing | 1 |
| 55***01 | Head, Piston | 1 |
E4-3-8 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***01 | Bracket | 1 |
E4-5-2 Seal Kit, Clam Shove, L, Jaw Bucket Ram
| 21***13 | Pin, Cotter, Split | 1 |
| 21***16 | Pin, Split | 1 |
| 24***26 | O Ring, 4.00in | 1 |
E4-5-1 Seal Kit, Ram
| 24***10 | O Ring | 1 |
| 24***15 | O Ring | 1 |
| 24***18 | O Ring | 1 |
E4-2-8 Ram, Backhoe, Knuckle
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***21 | Bush | 2 |
E4-8-1 Ram, Slew/Swing, Centremount
| 12***00 | Adapter, Pipe Long | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 2 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
E4-3-7 Ram, Stabiliser, Centremount
| 12***15 | Bush | 1 |
| 12***21 | Bush | 1 |
| 12***29 | Bracket | 2 |
E4-6-3 Valve, Check, Hose Burst, Boom & Lift Ram
| 13***30 | Bolt | 2 |
| 13***3Z | Nut | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
F Axles, Wheels & Transmission
F1-4-2 Mountings, Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Mounting | 1 |
F1-3-1 Gearbox Components
| 05***06 | Seal, Oil | 1 |
| 05***08 | Seal, Oil | 2 |
| 05***24 | Gear | 1 |
F1-2-1 Gear Change
| 05***16 | Rod | 1 |
| 05***17 | Spring | 1 |
| 05***18 | Ball | 2 |
F1-1-1 Gearbox Housing
| 05***01 | Gasket | 1 |
| 05***02 | Cover; N.L.A. Recommend Customer Go'S To Used Parts, Dealer. B Borsley'S Requested This. | 1 |
| 05***03 | Bolt | 6 |
F2-4-1 Valve, Shuttle
| 04***58 | Spring | 1 |
| 04***59 | Valve, Assembly, Forward/Reverse | 1 |
| 04***61 | Seal | 1 |
F2-5-2 Flywheel & Housing
| 02***76 | Washer, Tab | 3 |
| 02***77 | Flywheel, Assembly | 1 |
| 02***78 | Gear, Starter Ring | 1 |
F2-6-2 Circuit, Oil Cooler, Torque Converter
| 04***04 | Pipe, Assembly | 1 |
| 22***05 | Clip, Jubilee | 6 |
| 64***02 | Hose, 2300mm Long | 0 |
F2-3-1 Clutch, Reverse, & Drive Pump
| 04***01 | Seal | 2 |
| 04***02 | Bearing | 1 |
| 04***03 | Carrier, Assembly | 1 |
F2-2-1 Clutch, Forward
| 04***01 | Seal | 2 |
| 04***20 | Gear, Drive | 1 |
| 04***21 | Gear, Hub | 1 |
F2-7-1 Propshaft, Transmission Drive
| 13***12 | Bolt | 8 |
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 8 |
| 13***12 | Bolt | 8 |
F2-1-1 Transmission, Shuttle Reverser
| 02***84 | Plug, Core, D=11mm | 1 |
| 04***47 | Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve., Lowing Parts 81***78 + 04/50***01 Ti Gen046. W When Fitting New Housing Please Order The Fol, Housing; Use Baffle 04/50***01 + 81***53 With The Abo, Ve. | 1 |
| 04***48 | Sleeve | 1 |
F3-2-3 Differential, Housing Assembly
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 14 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 16 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F3-4-1 Wheels & Tires, 2wd
| 10***01 | Nut | 16 |
| 41***00 | Wheel, Centre, W15lx24 | 2 |
| 41***00 | Wheel, Centre, 12.5l X 16 | 2 |
F3-3-3 Crown Wheel & Pinion
| 13***8Z | Bolt, M12 X 30 | 12 |
| 45***00 | Gear, Crownwheel/Pinion, 41t/11 | 1 |
| 45***03 | Pin | 1 |
F3-4-2 Wheels & Tires, 2wd
| 10***01 | Nut | 16 |
| 41***00 | Wheel, Centre, W15lx24 | 2 |
| 41***00 | Wheel, Centre, 12.5l X 16 | 2 |
F3-1-3 Axle Assembly, 2 Wheel Drive, 4 Wheel Drive M320000 On
| 10***01 | Nut | 16 |
| 13***2Z | Bolt | 4 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 28 |
F3-4-3 Wheels & Tires, 4wd
| 10***01 | Nut | 26 |
| 41***00 | Wheel, Centre, W15lx24 | 2 |
| 41***00 | Wheel, 10.5 X 17.5, 5 Stud | 2 |
F4-2-4 Differential, Housing Assembly, 15.587 : 1, 4wd With 24" Wheels
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 14 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 16 |
| 14***06 | Washer | 2 |
F4-1-4 Axle Assembly, 4wd, Drive, Standard, With 24" Wheels
| 10***01 | Nut | 16 |
| 12***01 | Spacer | 2 |
| 13***09 | Bolt | 28 |
F4-5-2 Wheels & Tires, 4wd
| 10***01 | Nut | 26 |
| 41***00 | Wheel, Centre, W15lx24 | 2 |
| 41***00 | Wheel, 10.5 X 17.5, 5 Stud | 2 |
F4-4-1 Propshafts, Axle Drive 4wd
| 12***01 | Strap | 1 |
| 12***02 | Plate | 1 |
| 12***03 | Clip, Steady | 1 |
F4-3-4 Crown Wheel & Pinion, 15.587 : 1, 4wd, With 24" Wheels
| 13***8Z | Bolt, M12 X 30 | 12 |
| 45***02 | Spacer | 1 |
| 45***00 | Gear, Crownwheel & Pinion, 11 & 41 Teeth, Gear, Crownwheel & Pinion, 11 & 41 Teeth; 41t & 11t. See T.I. F105/H Or F105/Ha Or F101/E | 1 |
F4-5-1 Wheels & Tires, 4wd
| 10***01 | Nut | 2 |
| 41***00 | Wheel, Centre, W15lx24 | 1 |
| 41***00 | Rim, Wheel 5 Stud, 9x18; Replaced By 41/91***00, See San03597 | 1 |
F5-5-2 Gear Change
| 12***01 | Gaiter | 1 |
| 12***03 | Plate | 1 |
| 12***04 | Knob | 1 |
F5-1-1 Transmission, Jcb Syncro Shuttle, 2wd & 2/4wd External Components
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 04***19 | Seal, Oil; Replaced By 20/91***01, See San 10374 | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 4 |
F5-9-1 Propshafts, Transmission, 4wd
| 13***2Z | Bolt, 1/2" X 1.3/4" Long | 16 |
| 13***3Z | Nut, Lock | 16 |
| 91***02 | Kit-Spider | 2 |
F5-8-3 Circuit, Oil Cooler, Torque Converter
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 12***01 | Plug | 1 |
| 22***05 | Clip, Jubilee | 6 |
F5-6-1 Flywheel & Housing
| 02***78 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 3 |
| 02***70 | Dowel | 2 |
F5-5-1 Gear Change
| 12***01 | Gaiter | 1 |
| 12***02 | Plate | 1 |
| 12***04 | Knob | 1 |
F5-8-1 Circuit, Oil Cooler, Torque Converter
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 22***01 | Clip, Jubilee | 2 |
| 22***05 | Clip, Jubilee | 6 |
F5-4-1 Clutch Reverser Unit
| 13***02 | Plug, Blanking | 2 |
| 22***57 | Circlip, External | 4 |
| 22***94 | Circlip | 2 |
F5-8-2 Circuit, Auxiliary, Electric Oil Cooler, Torque Converter
| 12***01 | Bracket, Rear; Part Is Mss Use The Following 12***87, 123/, 01488 | 1 |
| 12***02 | Bracket, Front | 1 |
| 12***87 | Bracket, Front | 1 |
F5-3-1 Gearbox Components
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 5 |
| 44***03 | Sleeve | 1 |
| 44***04 | Gear, 36t; Non-Turbo'S Plus All French & German Machines. See T.I. 023, Gear, 36t | 1 |
F5-2-1 Transmission, Jcb Syncro Shuttle, 4wd With Drop Box.
| 13***8Z | Bolt, M10 X 30 | 1 |
| 13***9Z | Screw, M10x35mm | 15 |
| 14***14 | Washer | 1 |
F5-8-4 Circuit, Auxiliary, Electric Oil Cooler, Torque Converter
| 12***01 | Bracket, Rear; Part Is Mss Use The Following 12***87, 123/, 01488 | 1 |
| 12***02 | Bracket, Front | 1 |
| 12***87 | Bracket, Front | 1 |
F5-4-2 Clutch Reverser Unit
| 22***15 | Circlip | 2 |
| 44***05 | Plate, Friction | 12 |
| 44***09 | Washer, Thrust | 2 |
F5-7-1 Mountings, Engine, Transmission
| 11***09 | Washer | 6 |
| 11***01 | Mounting, Metalastik | 4 |
| 12***00 | Engine Mounting, Front, Right Hand | 1 |
G Brakes
G1-1-1 Brake, System
| 12***00 | Pipe, Rh | 1 |
| 12***00 | Pipe, Lh | 1 |
| 12***00 | Reservoir | 2 |
G1-3-2 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***9Z | Washer, Spring M12; Replaces 60***09, San 13190, If Fitted. Item 12 Reduced In Length. Spring Washer Not Required With Shorter Capscrew, Washer, Spring M12; Replaces 60***09, San 13190 | 4 |
G1-3-3 Brake, Parking
| 13***10 | Bolt | 2 |
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
G1-2-1 Brake Assembly
| 13***9Z | Bolt, M12x35 Grade 8.8 | 16 |
| 13***07 | Capscrew | 12 |
| 45***01 | Plate, Back | 2 |
G1-3-4 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
| 13***04 | Nut | 2 |
G1-3-1 Brake, Parking
| 13***0Z | Bolt, 1/2" X 1.1/2" Long | 4 |
| 14***8Z | Washer, Spring | 4 |
| 15***01 | Pivot, Seat; Replaced By Nla, See San 11411 | 1 |
H Steering
H1-5-1 Valve, Steering, Manual
| 14***18 | Seal, Bonded, 1/2" Bsp | 4 |
| 16***07 | Adapter | 2 |
| 16***10 | Adapter | 2 |
H1-2-1 Circuit, Steering, 2wd
| 14***11 | Seal, Bonded | 1 |
| 45***00 | Coupling, Quick Release Male | 1 |
| 61***00 | Hose, 3/8"Bsp X 1750mm; Quantity 2-Off For Standard Lmi System Only. For Machines Fitted With Optional Lmi Cut-Off Device Refer To Page C1-10-2, Hose, 3/8"Bsp X 1750mm | 1 |
H1-2-2 Circuit, Steering, 2wd, Turbo Option, Hydraulic Breaker
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H1-7-2 Ram, Steering, 2wd
| 13***0Z | Bolt | 1 |
| 13***16 | Bolt | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
H1-3-2 Steering Column
| 11***03 | Clip | 4 |
| 11***08 | Cover | 1 |
| 11***22 | Wheel, Steering; Part Is Mss Use The Following 12***00, 123/, 03842, 12***45. See San03769 | 1 |
H1-4-2 Pump, Steering
| 02***30 | Gear | 1 |
| 12***02 | Gear | 1 |
| 13***09 | Bolt | 1 |
H1-1-1 Axle Assembly, 2wd
| 12***01 | Pin, King | 2 |
| 12***02 | Pin, Cotter | 2 |
| 12***03 | Axle, Stub | 2 |
H1-6-1 Valve, Shock, Steering, Optional
| 13***10 | Screw, Cap | 2 |
| 35***00 | Valve, Complete | 1 |
| 35***02 | Valve, Assembly, Shock | 1 |
H1-7-3 Ram, Steering, 4wd
| 13***16 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
H2-8-3 Hub & Components, 4wd Axle
| 10***01 | Nut | 10 |
| 13***7Z | Bolt, M10x25 | 32 |
| 13***08 | Bolt | 12 |
H2-6-3 Ram, Steering, 4wd
| 13***16 | Bolt | 1 |
| 14***07 | Washer | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 2 |
H2-7-2 Circuit, Steering, 4wd, Turbo Engine, Hydraulic Breaker
| 14***11 | Seal, Bonded | 1 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 16***04 | Adapter, Male/Female | 1 |
H2-8-2 Knuckle, Steering, 4wd Axle
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***8Z | Bolt, M12 X 30 | 16 |
| 13***01 | Nut | 3 |
H2-8-1 Axle Assembly, 4wd, Steering
| 13***8Z | Bolt, 1/2" X 3.3/4" Long | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M10 X 30 | 8 |
H2-6-2 Ram, Steering, 4wd, Front
| 14***01 | Washer, Aluminium | 1 |
| 14***01 | Nipple, Grease, Straight, 1/8 Bsp | 1 |
| 14***01 | Nipple, Grease, 90deg. Angle | 1 |
H2-8-6 Axle Assembly, 4wd, Steering
| 13***8Z | Bolt, 1/2" X 3.3/4" Long | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***8Z | Bolt, M10 X 30 | 12 |
H2-8-4 Differential, Assembly 4wd Axle
| 10***02 | Stud | 4 |
| 10***03 | Nut, Castle | 4 |
| 10***05 | Dowel, Pin | 4 |
H2-7-1 Circuit, Steering, 4wd, Standard
| 14***11 | Seal, Bonded | 1 |
| 45***00 | Coupling, Quick Release Male | 1 |
| 61***00 | Hose | 2 |
H2-8-7 Knuckle, Steering, 4wd Axle
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 3 |
| 13***8Z | Bolt, M12 X 30 | 16 |
| 44***02 | Trunnion | 4 |
H2-8-5 Differential, Assembly 4wd Axle
| 13***07 | Bolt | 12 |
| 14***9Z | Washer | 1 |
| 21***06 | Dowel | 2 |
L Engine, 4.236/C4.236/T4.236
L1-3-1 Timing Case, Camshaf, T & Gears, Lj Build
| 02***02 | Casing, Timing | 1 |
| 02***05 | Gasket, Timing Case | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
L1-7-1 Engine, Complete, Ld Build
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
| 01***0R | Engine, Imperial, 4.236 Nat/Aspirated; Ld50145. Reconditioned Engines As Item 1 But Less The Following :- Flywheel & Housing,Starter Motor, Engine, Imperial, 4.236 Nat/Aspirated; Ld50145. Reconditioned Engines As Item 1 But Less The Following :-Flywheel & Housing, Starter Motor, Engine, Imperial, 4.236 Nat/Aspirated, Engine, Imperial, 4.236 Nat/Aspirated; See Note 2. Fan Belt, Fuel Filter & Pipework, Outlet Connection, Thermostat, Inlet/Exhaust Manifolds. | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Nat/Aspirated | 1 |
L1-2-3 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Lj Build
| 02***38 | Key | 1 |
| 02***27 | Bolt | 2 |
| 02***28 | Nut | 2 |
L1-1-1 Block Assembly, Imperial, Ld & Lh Builds
| 02***15 | Nut | 2 |
| 02***16 | Bolt, 89mm | 8 |
| 02***17 | Bolt, 105mm | 12 |
L1-8-3 Engine, Short, Imperial, Lh & Lj Builds
| 02***09 | Engine, Short, Imperial | 1 |
L1-2-1 Crankshaft, Bearings, Pistons, Con-Rods, Pulley & Fan Belt, Ld & Lh Builds
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***08 | Piston, Assembly, Oversize - .030inch | 4 |
| 02***10 | Kit-Piston Ring, Oversize - .030 Inch | 0 |
L1-8-1 Engine, Short, Imperial, Ld Build
| 02***25 | Engine, Short, Imperial | 1 |
L1-8-4 Engine, Short, Metric, Ld Build
| 02***11 | Engine, Metric, Short | 1 |
L1-7-2 Engine, Complete, Lh & Lj Builds
| 01***00 | Engine, Imperial, Complete, 4.236 Compensated; Lh50133. No Longer Available Use 01/11***00 And Refer To T.I.K135/H - K129/E., Engine, Imperial, Complete, 4.236 Compensated | 1 |
| 01***0R | Engine, Imperial, 4.236 Compensated; & 2, Lh50133 Up To M314999. As Item 1 But Less The Following:-Flywheel & Housing,Starter Motor,Alternator & Mountings, Engine, Imperial, 4.236 Compensated; Lh50205 Up To M314999. As Item 1 But Less The Following:-Flywheel & Housing,Starter Motor,Alternator & Mountings | 1 |
| 01***00 | Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Superseded By N.S.P. Part No Longer Available Use 01/11***00 And Refer To T.I.K135/H, K129/E., Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 S/Seded By N.S.P. Part No Longer Available Use 02/11***00 And Refer To T.I.K135/H - K129/E., Engine, Imperial, Complete, 4.236 Turbocharged, Engine, Imperial, Complete, 4.236 Turbocharged; Lj50183 Supersede By N.S.P. Part No Longer Available, Use 01/11***00 And Refer To T.I.K135/H K129/E. | 1 |
L1-8-5 Engine, Short, Metric, Lh & Lj Builds
| 02***12 | Engine, Short, Metric | 1 |
L1-4-1 Flywheel, Ld,Lh & Lj Builds
| 02***78 | Gear, Starter Ring | 1 |
| 02***14 | Washer | 6 |
| 02***85 | Flywheel, Assembly | 1 |
L1-3-3 Timing Case, Camshaft & Gears, Metric, Ld & Lh Builds
| 02***02 | Casing, Timing | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
| 02***38 | Key | 1 |
L1-6-1 Engine Mountings, Imperial & Metric, Ld,Lh & Lj Builds
| 11***09 | Washer | 4 |
| 11***01 | Mounting, Metalastik | 2 |
| 12***00 | Engine Mounting, Front, Right Hand | 1 |
L1-1-4 Block Assembly, Metric, Ld & Lh Builds
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***05 | Plug, Core, D=32mm | 8 |
L1-1-5 Block Assembly, Metric, Lj Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***05 | Plug, Core, D=32mm | 8 |
L1-3-4 Timing Case, Camshaft & Gears, Metric, Lj Build
| 02***02 | Casing, Timing | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
| 02***38 | Key | 1 |
L1-3-1 Timing Case, Camshaf, T & Gears, Lh Build
| 02***02 | Casing, Timing | 1 |
| 02***05 | Gasket, Timing Case | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
L1-1-3 Block Assembly, Imperial, Lj Build
| 02***01 | Thimble | 10 |
| 02***02 | Bolt | 10 |
| 02***03 | Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; With Flame Ring. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip-Fit Type., Liner, Press Fit, Liner, Press Fit; Flame Ring Type. Special Tools Required, For General Service, Use Slip Fit Type., Liner, Press Fit; Flame Ring Type. This Requires Specialised Tools For Fitting, For General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ring Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip Fit Type., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing,For General Service Use Slip-Fit., Liner, Press Fit; Refer To Service Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Refer To Workshop Manual. Special Tools Required For Fitting, Boring And Honing, General Service Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. This Requires Specialised Tools For Fitting, For General Service, Use Slip-Fit Type., Liner, Press Fit; Flame Ringed Type. Special Tools For Fitting, Boring And Honing Required, General Service Use Slip-Fit Type. | 4 |
L1-3-1 Timing Case, Camshaf, T & Gears, Ld Build
| 02***02 | Casing, Timing | 1 |
| 02***05 | Gasket, Timing Case | 1 |
| 02***06 | Gasket, Timing Cover | 1 |
L2-3-4 Rocker Assembly, Push Rods & Tappets, Lh & Lj Builds
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-2-1 Rocker Cover, Lj Bui, Ld
| 02***35 | Cover, Rocker | 1 |
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***80 | Pipe | 1 |
L2-1-2 Cylinder Head, Lh & Lj Builds
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***20 | Seat, Spring | 8 |
L2-2-1 Rocker Cover, Lh Bui, Ld
| 02***35 | Cover, Rocker | 1 |
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***80 | Pipe | 1 |
L2-3-2 Rocker Assembly, Push Rods & Tappets, Lh & Lj Builds
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-1-4 Cylinder Head, Lh & Lj Builds
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***21 | Holder, Collet | 8 |
L2-3-3 Rocker Assembly, Push Rods & Tappets, Ld Build
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 8 |
L2-2-1 Rocker Cover, Ld Bui, Ld
| 02***35 | Cover, Rocker | 1 |
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***80 | Pipe | 1 |
L2-3-1 Rocker Assembly, Push Rods & Tappets, Ld Build
| 02***27 | Shaft, Rocker | 1 |
| 02***28 | Spring, Long | 2 |
| 02***29 | Spring, Short | 2 |
L2-1-1 Cylinder Head, Ld Build
| 02***15 | Nut | 2 |
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
L2-2-2 Rocker Cover, Lh Build
| 02***36 | Gasket, Rocker Cover | 1 |
| 02***37 | Cap, Oil Filler | 1 |
| 02***80 | Pipe | 1 |
L2-1-3 Cylinder Head, Ld Build
| 02***18 | Spring, Valve, Inner | 8 |
| 02***19 | Spring, Valve, Outer | 8 |
| 02***21 | Holder, Collet | 8 |
L3-4-12 Filter, Air, Lh & Lj Builds
| 12***00 | Bracket | 1 |
| 12***00 | Hose, Assembly, Induction | 1 |
| 12***01 | Hose, Induction Elbow | 1 |
L3-5-6 Exhaust System, Lh & Lj Builds
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 1 |
| 12***00 | Pipe, Exhaust | 1 |
L3-4-21 Filter, Air, Ld Build
| 13***6Z | Bolt, Bolt; See Index B3 For Sideshift Arrangement. Refer To Index B3 For Sideshift Arrangement. | 4 |
| 13***4Z | Nut, Philidas Thin | 4 |
| 22***13 | Clip, Jubilee; Replaces Khj0336 | 2 |
L3-4-8 Filter, Air, Optional, Ld Build
| 12***02 | Bracket | 1 |
| 13***4Z | Bolt | 2 |
| 13***10 | Bolt | 1 |
L3-2-1 Manifold, Exhaust, Ld Build
| 02***49 | Manifold, Exhaust | 1 |
| 02***50 | Gasket | 2 |
| 02***51 | Nut | 4 |
L3-1-2 Manifold, Induction, Lh & Lj Builds
| 02***16 | Manifold, Induction | 1 |
| 02***07 | Gasket | 1 |
| 02***08 | Gasket | 1 |
L3-4-11 Filter, Air, Ld Build
| 12***02 | Bracket | 1 |
| 13***4Z | Bolt | 2 |
| 13***4Z | Bolt, 3/8" | 5 |
L3-5-16 Exhaust System, Lh & Lj Builds
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust | 1 |
| 12***00 | Silencer, Exhaust Extension | 1 |
L3-4-19 Filter, Air, Lh & Lj Builds
| 12***03 | Tube | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Hose, Assembly | 1 |
L3-1-1 Manifold, Induction, Ld Build
| 02***45 | Manifold, Induction | 1 |
| 02***46 | Gasket | 1 |
| 02***47 | Gasket | 1 |
L3-2-2 Manifold, Exhaust, Lh & Lj Builds
| 02***50 | Gasket | 2 |
| 02***51 | Nut | 4 |
| 02***10 | Washer | 4 |
L3-5-19 Exhaust System, Ld Build
| 12***01 | Bracket | 1 |
| 12***07 | Silencer | 1 |
| 12***65 | Pipe, Exhaust Extension, Stainless Steel | 1 |
L3-5-20 Exhaust System, Lh & Lj Builds
| 02***51 | Gasket | 1 |
| 12***26 | Pipe, Exhaust Extension | 1 |
| 12***79 | Cap, Rain | 1 |
L3-4-22 Filter, Air, Lh & Lj Builds
| 12***01 | Band, Mounting | 2 |
| 12***02 | Band, Mounting | 1 |
| 12***00 | Hose | 1 |
L3-5-1 Exhaust System, Ld Build
| 02***52 | Gasket | 1 |
| 12***00 | Pipe, Exhaust Extension | 2 |
| 12***01 | Bracket | 1 |
L3-3-2 Turbo, Heatshield, Lh & Lj Builds
| 02***15 | Guard, Heat | 1 |
| 02***00 | Guard, Heat | 1 |
| 02***60 | Stud | 2 |
L4-4-17 Radiator, Fittings & Mountings, Lj Build
| 12***01 | Cap, Coolant Filler, Double Seal, 7psi | 1 |
| 12***00 | Bottle, Filler | 1 |
| 12***96 | Hose, Overflow Assembly | 1 |
L4-3-1 Thermostat, Housing, Inlet & Outlet, Ld Build
| 02***71 | Thermostat | 1 |
| 02***95 | Plug, Taper | 1 |
| 02***99 | Gasket | 1 |
L4-1-1 Pump, Water, Ld Build
| 02***66 | Pump, Water | 1 |
| 02***70 | Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7,9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump, Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1. & 11 No Longer Required,Repaired And Replaced By Kit 02/10***87., Kit-Repair, Water Pump; Contains Items 3.4.5.6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 No Longer Required,Repaired And Replaced By Kit., Kit-Repair, Water Pump; Contains Items 3,4,5,6,7,8,9,10,11,12,13 & 27. Items 7,8,9 & 11, Repaired And Replaced By K It 02/10***87., Kit-Repair, Water Pump; Contains Items 3,4,5,6.7.8.9.10,1.11.12.13.27. Items 7.9.10,1 & 11 Are No Longer Required, Repaired And Replaced By Kit 02/10***87. | 1 |
| 02***91 | Seal, Front | 1 |
L4-3-3 Thermostat, Housing, Inlet & Outlet, Lh & Lj Builds
| 02***95 | Plug, Taper | 2 |
| 02***99 | Gasket | 1 |
| 02***60 | Gasket | 1 |
L4-4-10 Radiator, Hoses & Fittings, Ld,Lh & Lj Builds
| 12***80 | Bracket, Retaining, Expansion Tank | 1 |
| 12***00 | Bracket | 1 |
| 12***00 | Bottle, Expansion, Assembly | 1 |
L4-1-4 Pump, Water, Lh & Lj Builds
| 02***94 | Body, Rear | 1 |
| 02***95 | Plug, Taper | 1 |
| 02***96 | Key | 1 |
L5-2-7 Filter, Oil & Cooler, Lh & Lj Builds
| 02***63 | Gasket | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***57 | Adapter | 1 |
L5-1-3 Sump, Oil Pump & Fit, Tings, Lh,Lj Builds
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
| 02***64 | Plunger | 1 |
L5-1-1 Sump, Oil Pump & Fit, Tings, Lh Build
| 02***59 | Sump, Oil | 1 |
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
L5-1-1 Sump, Oil Pump & Fit, Tings, Lj Build
| 02***59 | Sump, Oil | 1 |
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
L5-2-1 Filter, Oil, Ld Build
| 02***63 | Gasket | 1 |
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***71 | Head, Filter | 1 |
L5-2-8 Filter, Oil, Ld Build
| 02***63 | Gasket | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
| 02***28 | Adapter | 1 |
L5-2-4 Filter, Oil & Cooler, Lh Build
| 02***63 | Gasket | 1 |
| 02***71 | Head, Filter | 1 |
| 02***84 | Element, Oil Filter, Canister Type-Short | 1 |
L5-1-1 Sump, Oil Pump & Fit, Tings, Ld Build
| 02***59 | Sump, Oil | 1 |
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
L5-3-1 Piston Cooling Jets, Lh & Lj Builds
| 02***15 | Jet, Piston Cooling | 4 |
| 02***16 | Valve | 4 |
| 02***56 | Plug | 4 |
L5-1-3 Sump, Oil Pump & Fit, Tings, Ld Build
| 02***60 | Gasket, Oil Sump | 1 |
| 02***61 | Pump, Oil | 1 |
| 02***64 | Plunger | 1 |
L6-9-1 Fuel System, Ld & Lh Builds
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
| 02***85 | Pipe, Fuel, Inj/Leak-Off | 1 |
L6-6-1 Filter, Fuel Sediment, Ld,Lh & Lj Builds
| 20***00 | Filter, Assembly, Fuel Sediment | 1 |
| 20***01 | Head, Sediment Filter | 1 |
| 20***03 | Element, Assembly | 1 |
L6-4-2 Pump, Fuel Lift, Alternative, Ld,Lh & Lj Builds
| 17***12 | Kit-Seal | 1 |
| 17***00 | Pump, Fuel Lift | 1 |
| 17***19 | Kit-Repair, Fuel Lift Pump | 1 |
L6-9-6 Fuel System, Lj Build
| 02***83 | Pipe, Fuel, Assembly, Filter To Inj/Pump | 1 |
| 02***84 | Pipe, Fuel, Assembly, Inj/Pump To Filter | 1 |
| 02***88 | Nut | 1 |
L6-5-3 Cold Start, Ether, Optional, Ld,Lh & Lj Builds
| 12***07 | Bracket, Valve & Fuse, Assembly | 1 |
| 12***08 | Switch, E.T.S | 1 |
| 12***09 | Block, Or Fitting | 1 |
L6-1-4 Pump, Fuel Injection, Lj Build
| 17***02 | Screw | 1 |
| 17***03 | Nut | 3 |
| 17***05 | Screw, Vent Assembly | 1 |
L6-1-2 Pump, Fuel Injection, Ld & Lh Builds
| 17***00 | Pump, Fuel Injection | 1 |
| 17***02 | Screw | 1 |
| 17***03 | Nut | 3 |
L6-1-1 Fuel Injection, Equipment, Ld & Lh Builds
| 02***53 | Washer | 4 |
| 02***54 | Pipe, No.1 Cylinder | 1 |
| 02***55 | Pipe, No.2 Cylinder | 1 |
L6-1-3 Fuel Injection, Equipment, Lj Build
| 02***53 | Washer | 4 |
| 02***81 | Washer | 8 |
| 02***90 | Bolt | 3 |
L6-7-1 Filter, Fuel, Ld & Lh Builds
| 02***89 | Bracket | 1 |
| 02***94 | Banjo | 1 |
| 02***95 | Valve, Non-Return | 1 |
L6-4-1 Pump, Fuel Lift, Ld,Lh & Lj Builds
| 02***80 | Gasket | 1 |
| 02***72 | Plate, Keep | 2 |
| 02***98 | Screw | 1 |
L6-7-3 Filter, Fuel, Ld,Lh & Lj Builds
| 02***94 | Banjo | 1 |
| 02***95 | Valve, Non-Return | 1 |
| 02***97 | Bolt | 2 |
L6-2-1 Controls, Throttle & Stop, Ld,Lh & Lj Builds
| 02***83 | Spring, Stop/Return | 1 |
| 02***84 | Spring, Throttle Return | 1 |
| 02***90 | Bracket | 2 |
L8-3-3 Turbo, Pipework, Lh & Lj Builds
| 02***51 | Nut | 4 |
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
L8-2-2 Turbocharger, Lh & Lj Builds
| 02***45 | Gasket | 1 |
| 02***56 | Turbocharger | 1 |
| 02***57 | Housing, Assembly, Centre | 1 |
L9-1-2 Gasket Sets, Imperial, Lh & Lj Builds
| 02***88 | Kit-Gasket, Bottom | 1 |
| 02***89 | Kit-Gasket, Top; Lh50133,Lh50205 & Lj50183. Refer To Service Workshop Manual, Kit-Gasket, Top | 1 |
| 02***05 | Kit-Gasket, Top | 1 |
L9-2-2 Kit, Engine Overhaul, Lh Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***20 | Kit-Piston Ring | 4 |
| 02***35 | Seal, Front Oil | 1 |
L9-2-1 Kit, Engine Overhaul, Ld Build
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
L9-2-4 Kit, Engine Overhaul, Ld Build
| 02***07 | Piston, Assembly, 5 Ring | 4 |
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
L9-1-3 Gasket Sets, Metric, Ld Build
| 02***95 | Kit-Gasket, Top | 1 |
| 02***96 | Kit-Gasket, Bottom | 1 |
| 02***53 | Kit-Gasket, Bottom | 1 |
L9-2-3 Kit, Engine Overhaul, Lj Build
| 02***06 | Liner, Slip Fit | 4 |
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
L9-1-1 Gasket Sets, Imperial, Ld Build
| 02***87 | Kit-Gasket, Top | 1 |
| 02***88 | Kit-Gasket, Bottom | 1 |
| 02***35 | Kit-Gasket, Top | 1 |
L9-2-6 Kit, Engine Overhaul, Lj Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***59 | Piston, Assembly; Original Has "Ks" Stamped On Piston Top Face. An Alternative Piston Item 10a Was Fitted From Engine No.U424723u On, Do Not Mix., Piston, Assembly; Original, Has "Ks" Stamped On Piston Top Face. An Alternative Piston, Item 10a Was Fitted From Engine No.U424723u On, Do Not Mix., Piston, Assembly; Original,Has "S" Stamped On Plate R/H Side. The Piston Identity Code Is Now Located On The Engine Serial Number Plate., Piston, Assembly; Original,Has "Ks" Stamped Onpiston Top Face. An Alternative Piston,Item 10a Was Fitted From Engine No.U424723u On, Do Not Mix., Piston, Assembly, Piston, Assembly; Original,Has "S" Stamped On Plate R.H Side. The Piston Identity Code Is Now Located On The Engine Serial Number Plate, Piston, Assembly; Original,Has "Ks" Stamped On Piston Top Face. An Alternative Piston, Item 10a Was Fitted From Engine No.U424723u On, Do Not Mix., Piston, Assembly; Original,Has "Ks" Stamped On Piston Top Face. An Alternative Piston,Item 10a Was Fitted From Engine No.U424723u On, Do Not Mix., Piston, Assembly; Original Has "S" Stamped On Plate R/H Side. The Piston Identity Code Is Now Located On The Engine Serial Number Plate. | 4 |
L9-2-5 Kit, Engine Overhaul, Lh Build
| 02***35 | Seal, Front Oil | 1 |
| 02***36 | Seal, Rear Oil | 1 |
| 02***93 | Piston, Assembly, 3 Ring | 4 |
L9-1-4 Gasket Sets, Metric, Lh & Lj Builds
| 02***05 | Kit-Gasket, Top | 1 |
| 02***96 | Kit-Gasket, Bottom | 1 |
| 02***53 | Kit-Gasket, Bottom | 1 |
1550B-2WD serial number reference
For the JCB 1550B-2WD, the machine identification plate is located on the loader tower or cab frame. The serial number is also stamped into the chassis frame. Verify applicability with a JCB dealer using the full serial number and engine serial number.
| Prefix | Identifies | Notes |
|---|---|---|
| M306001- | JCB 1550B-2WD Backhoe Loader (USA/CAN market) | |
| 0306000 - 0310999 | JCB 1550 & 1550B Backhoe (Cylinder configuration applicability) | |
| 0303131 - 0399999 | JCB 1550 & 1550B Backhoe (Stabilizer/Outrigger cylinder configuration applicability) | |
| 0298276 - 0310999 | JCB 1550 & 1550B Backhoe (Side Shift machine configuration applicability) |
Frequently asked questions
What engine does the JCB 1550B-2WD use?
The JCB 1550B-2WD uses a Perkins LH 4.236 turbocharged diesel engine producing 83 gross horsepower at 2,200 rpm.
What is the operating weight of the JCB 1550B-2WD?
The standard configuration of the JCB 1550B-2WD weighs 15,510 pounds (7,035 kg).
What model replaced the JCB 1550B?
The JCB 1550B was succeeded by the 2CX series backhoe loader.
What 1550B-2WD owners discuss
What are the common powertrain and hydraulic behaviors associated with the JCB 1550B-2WD transmission?
The machine utilizes a JCB Synchro Shuttle transmission with four synchronized forward and four synchronized reverse gears. A known behavior is intermittent loss of drive in forward or reverse after approximately 40 minutes of operation, which resolves after the transmission cools down. This is often caused by failing shuttle shift clutch plates or seals. The transmission oil cooler should be inspected for leaks or blockage. Correct fluid is critical; using Dexron ATF in place of JCB Special Transmission Fluid or JCB Extreme Performance Transmission Fluid (SAE 10W) can cause failure. The fluid level must be checked with the engine idling to ensure the torque converter is filled for an accurate reading.
What electrical issues are typical for the JCB 1550B direction control system?
The forward and reverse direction is selected electrically via microswitches located inside the lever on the left side of the steering wheel. These switches activate hydraulic solenoids on the transmission body. Common failures include worn or bridged microswitches that prevent the solenoids from engaging, resulting in the engine revving without movement. The inhibitor switch, which disables the starting system when in gear, is also a frequent failure point. Operators should verify voltage at the solenoids and check the continuity of the left pedal switch, which breaks the electrical signal for both directions when depressed.
What are the typical undercarriage and wear patterns for this machine?
The standard 2WD configuration uses front tires sized 11L-16 PR and rear tires sized 16.9 x 24 10PR. Wear patterns often include worn bucket pins and front axle bushings. The machine is noted for having significant reach, which can place stress on the linkage if used for deep digging near obstacles. The hydraulic system provides power steering with a manual override if power fails. Operators should monitor the front axle for play and check the condition of the steering cylinder seals.
What are the engine quirks and specifications for the JCB 1550B series?
The machine is powered by a Perkins LH 4.236 turbocharged diesel engine producing 83 gross horsepower at 2,200 rpm and 229 foot-pounds of torque at 1,400 rpm. The engine has a compression ratio of 16.5:1 and five main bearings. It starts easily and runs smoothly when in good condition. Common issues include low oil pressure warnings after long storage periods due to sensor malfunctions or degraded oil. The cooling system holds 3.6 gallons, the fuel tank holds 24 gallons, and the engine oil capacity including the filter is 2.8 gallons.
What are common electrical and sensor issues reported by owners?
Beyond the direction control switches, the alternator is a common failure point, often leading to battery drain even when the unit is not in use. The oil pressure sending unit is prone to corrosion or damage, particularly after long periods of inactivity, causing false low-pressure warnings. Operators should inspect the wiring color codes for correctness and verify the 5-amp fuse in the fuse block that supplies power to the forward solenoid circuit.
What should be checked when buying a used JCB 1550B-2WD?
Verify the serial number to confirm the specific transmission type (BorgWarner vs. electric ZF-style shuttle) and correct fluid requirements. Check the shuttle shift clutch plates and seals for wear, as heat-related failure is common. Inspect the front axle bushings for play and the bucket pins for excessive wear. Test the forward and reverse microswitches and solenoids for proper engagement. Check the alternator output and battery health. Verify the condition of the hydraulic cooler and radiator.
What is the safety-critical fix regarding the transmission fluid?
Ensure the transmission is filled with the correct JCB Special Transmission Fluid or JCB Extreme Performance Transmission Fluid (SAE 10W). Using incorrect fluids like Dexron ATF can lead to rapid transmission failure. Have your dealer verify the fluid type and level procedure before operation.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 1550B-2WD part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.