JCBconstructionfastrac
Jcb 1115
Maintenance schedule, common problems & OEM parts breakdown
The JCB Fastrac 1115 is a four-wheel drive agricultural tractor produced in England from 1995 to 1996. It is powered by a Perkins 1000-6 HR1 turbocharged diesel engine with a 6.0 L displacement, producing 115 hp at 2400 rpm and 330.4 lb-ft of torque at 1400 rpm. The machine weighs 11,686 lbs and features a 36-speed synchromesh transmission with ceramic disc clutch. Configurations include a cab with air conditioning, hydrostatic power steering, and dry disc brakes. It utilizes the OEM part reference agricultural tires front and rear and has a 58.1 gal fuel tank capacity.
The Fastrac 1115 represents JCB's entry into the high-speed agricultural tractor market, bridging the gap between traditional farm tractors and road-legal transport. It was succeeded by the Fastrac 1115S series, which extended production to 1998 and offered increased power output. The machine remains relevant in the used market due to its robust Perkins engine and versatile 36-speed transmission, which allows for efficient operation across varied field conditions and road transport. Its design prioritizes operator comfort and high-speed capability, distinguishing it from standard utility tractors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Jcb 1115 specifications
Engine
| Model | Perkins 1000-6 HR1 |
| Configuration | Turbocharged diesel, 6-cylinder, liquid-cooled |
| Displacement | 6.0 L (365.2 ci) |
| Bore/Stroke | 100 x 127 mm (3.937 x 5.00 in) |
| Power (Net) | 85.8 kW (115 hp) at 2400 rpm |
| Torque | 448.0 Nm (330.4 lb-ft) at 1400 rpm |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 5300 kg (11,686 lb) |
| Shipping Weight | Not documented for this exact serial range — verify with your dealer |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 515 cm (203.1 in) |
| Transport Width | Not documented for this exact serial range — verify with your dealer |
| Transport Height | 279 cm (110.2 in) |
| Wheelbase | 277 cm (109.4 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Turning Radius | 12.5 m (41.0 ft) |
Performance
| Travel Speed | 28.96 km/h (18 mph) to 48.28 km/h (30 mph) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
| Lift/Dig/Dump/Drawbar | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 219.9 L (58.1 gal) |
| Hydraulic System | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Jcb 1115 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the 1115 beyond the schedule
Predictive Maintenance & Fluid Analysis
JCB machines utilize a 500-hour engine oil interval, extending service life compared to competitors. At this milestone, collect oil samples from the engine, hydraulic, axle, and final drive systems to establish a baseline. Analyze hydraulic return filter magnets for metallic debris to detect early bearing or seal wear. Monitor coolant condition and replace with JCB-spec long-life coolant at 1000 hours. Use JCB Engine Oil Special or equivalent 15W-40 diesel oil meeting API specifications to maintain engine protection and fuel efficiency.
Corrective & Common Repairs
Common issues on the Fastrac 1115 include hydraulic hose chafing and cylinder rod scoring, requiring regular inspection of fittings at the kingpost and boom. Check the Perkins 1000-6 HR1 engine for turbocharger shaft play and boot condition during 1000-hour services. Inspect the ceramic disc clutch for wear and adjust as necessary. Verify the 36-speed transmission operation for smooth gear engagement. Address any leaks in the hydraulic system immediately to prevent component damage and environmental issues.
Overhaul & Rebuild Points
The 2000-hour deep service includes structural inspection of the boom, arm, loader arm, and chassis for cracking or unauthorized welding. Measure swing ring play on tracked models using dial indicators to assess wear. Service brake discs for wear and check immersed brake condition on backhoe models. Check injector spray patterns via diagnostic tool and replace injectors as required. Inspect the cab HVAC system for A/C pressure and evaporator condition. Replace all filters and fluids to reset the machine for the next service cycle.
Seasonal & Environment Servicing
Perform daily walkarounds to check fluid levels, tire pressure, and GET condition before starting work. Inspect tracks or tires for damage and proper tension to maintain stability and performance. Clean the undercarriage and remove debris to prevent accelerated wear and hidden problems. Test all warning lights, gauges, and safety systems to ensure proper operation. Store the machine under cover when possible to protect against weather and reduce corrosion. Ensure operators understand proper warm-up procedures to prevent cold operation damage.
1115 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 478/00413 | Grille, Air/Con Filter | Air intake service | Check fitment → |
| 32/909700 | Filter, Air, Paper | Air intake service | Check fitment → |
| 478/00677 | Filter, Air Conditioning | Air intake service | Check fitment → |
| 478/00455 | Filter, Air Regulator, Assembly | Air intake service | Check fitment → |
| 478/00851 | Filter, Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
1115 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| P0087 | Fuel rail pressure too low | Fuel supply restriction, leaking injector, or faulty pressure sensor | Check fuel filter condition and fuel line integrity; verify sensor wiring |
| P0112 | Intake air temperature sensor malfunction (low voltage) | Short circuit to ground in sensor wiring or failed sensor | Inspect sensor connector for corrosion; test sensor resistance |
| P0201 | Injector circuit open – 1st cylinder | Broken wire, loose connector, or failed injector solenoid | Check injector harness continuity and connector lock |
| P0202 | Injector circuit open – 2nd cylinder | Broken wire, loose connector, or failed injector solenoid | Check injector harness continuity and connector lock |
| P0115 | Engine coolant temperature sensor circuit | Sensor failure or wiring fault | Verify coolant level; test sensor signal voltage |
| P0117 | Low signal circuit 1 of the engine coolant temperature sensor | Open circuit or short to ground in sensor wiring | Inspect wiring harness for damage; check ground points |
| P0118 | High signal circuit 1 of the engine coolant temperature sensor | Short to voltage in sensor wiring | Inspect wiring harness for chafing or contact with hot components |
| P0252 | Range/Performance of fuel metering device (high pressure pump) | Fuel metering valve sticking or pump wear | Check fuel quality and filter; inspect valve operation |
| P0253 | Low signal of fuel metering device | Electrical fault in metering valve circuit | Check connector pins for corrosion; test valve resistance |
| P0254 | High signal of fuel metering device | Short to voltage in metering valve circuit | Inspect wiring for damage; verify connector sealing |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
1115 attachments & work tools
Agricultural Implements
The JCB Fastrac 1115 is a four-wheel drive agricultural tractor equipped with a rear three-point hitch for mounting implements. Compatible tools include tillage, hay, and harvesting equipment from manufacturers such as Ignite Attachments. The tractor features a 36-speed transmission and hydrostatic power steering to support varied field applications.
Power Take-Off (PTO) Driven Tools
The machine is equipped with a Power Take-Off (PTO) system to drive auxiliary agricultural implements. The specific PTO shaft dimensions and rotational speed ratings are not documented in the provided sources. Operators must verify the PTO configuration against the requirements of the specific implement being used.
Hydraulic Systems
The JCB Fastrac 1115 hydraulic system provides a total flow of 19.6 gpm (74.2 lpm). This hydraulic capacity supports the operation of hydraulic-driven attachments. The specific number of remote hydraulic outlets or valve configurations is not documented in the provided sources.
Engine and Fluids
The tractor is powered by a Perkins 1000-6 HR1 turbocharged diesel engine producing 115 hp (85.8 kW) at 2400 rpm. JCB recommends using genuine JCB service fluids, including advanced engine oil and hydraulic oil, to maintain warranty and performance. Specific fluid capacities for the engine oil and cooling system are not detailed in the provided text.
All 1115 assemblies by section
Every catalogued assembly group for the Jcb 1115. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
A Attachments
A3-3-1 Claw Hitch
| 13***9Z | Screw, M10x35mm | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***2Z | Bolt | 8 |
A3-10-3 Pickup Hitch
| 13***2Z | Nut, Thin M20 | 1 |
| 14***9Z | Washer | 4 |
| 14***2Z | Washer | 2 |
A3-18-1 Top Link, Front
| 47***00 | Link, Top | 1 |
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
A3-21-2 Ladder Hitch, Pto Drawbar, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***9Z | Bolt, M20 X 90 | 4 |
A3-22-1 Trailer Coupling,, Ladder Hitch, Rockinger
| 47***16 | Cover | 1 |
| 47***26 | Washer | 1 |
| 47***27 | Pin, Locking | 2 |
A3-21-1 Ladder Hitch, Assembly, Rockinger
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***3Z | Nut, M20 | 4 |
| 14***2Z | Washer, M20 | 8 |
A3-19-1 Towing Hook
| 13***7Z | Bolt, M10x25 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
| 47***44 | Hook, Tow | 1 |
A3-10-2 Hitch Assembly, Rear, Cat 3
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-20-3 P.T.O Drawbar, With Piton, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 1 |
A3-2-1 Hitch Assembly, Front
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt | 8 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
A3-21-3 Ladder Hitch, Pto Drawbar & Piton, Fixed Offsetable With Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***8Z | Bolt, M20 X 80mm | 5 |
A3-15-3 Lower Links, Cat 2
| 47***46 | Link, Assembly, Lower, Left Hand, Cat 2 | 1 |
| 47***47 | Link, Lower, Cat.2, Right Hand | 1 |
| 47***07 | Kit-Repair, Cat2 Link | 1 |
A3-13-1 Lift Rod Assembly
| 47***00 | Rod, Lift Assembly | 2 |
| 47***34 | Rod, Eye End | 1 |
| 47***35 | Guard, Adjuster | 1 |
A3-15-2 Lower Links, Cat 3
| 47***05 | Spring | 1 |
| 47***12 | Latch, Claw | 1 |
| 47***13 | Cover, Latch | 1 |
A3-12-2 Top Link Assembly, Hook End, 80mm Lift Rams
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-20-2 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-30-1 Rear Deck
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 8 |
| 13***3Z | Nut, M16 | 8 |
| 14***1Z | Washer, M16 Plain | 8 |
A3-14-2 Stabiliser, Automatic
| 47***00 | Stabiliser, Automatic, Assembly | 1 |
| 47***83 | Housing, Recoil | 1 |
| 47***84 | Latch | 1 |
A3-10-1 Hitch Assembly, Rear, Cat 2
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 4 |
| 13***9Z | Bolt, M10 X 35 | 4 |
| 13***6Z | Bolt, M20 X 70 | 6 |
A3-20-4 P.T.O Drawbar, Fixed Offsetable, No Cushioning
| 13***4Z | Bolt, M20 X 60mm | 4 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 13***1Z | Bolt, M20 X 110mm | 2 |
A3-4-1 Front Towing Point
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
A3-20-1 Drawbar, Assembly
| 13***7Z | Bolt, M10x25 | 2 |
| 13***6Z | Bolt, M20 X 70 | 2 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 2 |
A3-1-2 Weight Tray Assembly, Front, With Hitch
| 13***1Z | Nut | 2 |
| 14***2Z | Washer, M20 | 2 |
| 47***01 | Bush, Reducer, Cat 3 - Cat 2 | 1 |
A3-4-2 Front Towing Point
| 13***1Z | Bolt; Replaces 60***11, Zinc Plate (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z'Refer To Service Workshop Manual For Torque Settings., Bolt; Replaces 60***11, Bolt; Replaces 60***11, Zinc Plated (Yellow) Finish. All Fasteners With A Suffix 'Z' Refer To Service Workshop Manual For Torque Settings | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***1Z | Washer, M16 Plain | 4 |
A3-1-1 Weight Tray Assembly, Front, No Hitch
| 13***2Z | Bolt | 6 |
| 13***1Z | Nut | 2 |
| 13***3Z | Nut, M20 | 6 |
A3-11-1 Top Link Assembly, Eye End, 75mm Lift Rams
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-15-1 Lower Links, Cat 2
| 47***03 | Bush, Tension Pin | 1 |
| 47***02 | Latch, Claw | 1 |
| 47***03 | Cover, Latch | 1 |
A3-14-1 Stabiliser, Standard Compression
| 47***85 | Rod, Eye End | 1 |
| 47***86 | Spring | 1 |
| 47***87 | Rod, Connecting Link | 1 |
A3-2-2 Hitch Assembly
| 13***9Z | Screw, M10x35mm | 2 |
| 13***2Z | Bolt | 8 |
| 13***7Z | Bolt, M16 X 75mm | 2 |
A3-10-4 Pickup Hitch, Short Ladder
| 13***2Z | Nut, Thin M20 | 1 |
| 14***9Z | Washer | 4 |
| 14***2Z | Washer | 2 |
A3-15-4 Lower Links, Cat 3
| 47***49 | Link, Lower, Left Hand, Cat3 | 1 |
| 47***50 | Link, Lower, Right Hand, Cat3 | 1 |
| 47***08 | Kit-Repair, Cat3 Link | 1 |
A3-12-1 Top Link Assembly, Eye End, 80mm Lift Rams
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-11-2 Top Link Assembly, Hook End, 75mm Lift Rams
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
A3-14-3 Stabiliser, Short, Walterscheid, 4ws
| 47***05 | Handle | 1 |
| 47***06 | Spring, Wire | 1 |
| 47***97 | Pin, Clevis | 1 |
B Bodywork, Cab, Loader End
B1-1-1 Chassis & Fittings, 2ws
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***1Z | Bolt, M12 X 45 | 2 |
B1-3-1 Tank, Diesel Fuel
| 13***7Z | Bolt, M10x25 | 4 |
| 13***4Z | Bolt, M10x60 | 1 |
| 13***8Z | Bolt, M10x80 | 1 |
B1-6-2 Fenders,Front & Rear
| 13***8Z | Bolt, M10 X 30 | 4 |
| 13***0Z | Bolt, M10 X 40 | 14 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
B1-4-1 Steps, Cab Access
| 13***8Z | Screw, M8x30 | 6 |
| 13***8Z | Bolt, M10 X 30 | 3 |
| 13***9Z | Bolt, M10 X 35 | 2 |
B1-6-1 Fenders,Front & Rear
| 13***9Z | Bolt, M8 X 35mm | 1 |
| 13***8Z | Bolt, M10 X 30mm | 4 |
| 13***0Z | Bolt, M10 X 40 | 18 |
B1-5-2 Bonnet & Fittings
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 8 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
B1-2-1 Tank, Hydraulic, 2ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B1-5-1 Bonnet & Fittings
| 13***3Z | Screw; Replaces 69***21 | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
B1-1-2 Chassis & Fittings, 4ws
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***2Z | Bolt, M16 X 50mm | 2 |
| 13***1Z | Bolt, M12 X 45 | 2 |
B1-2-2 Tank, Hydraulic, 4ws
| 12***06 | Gauge, Sight, Hydraulic; Replaces 21***06 + 26***02, See San08668 | 1 |
| 12***04 | Kit-Seal, Sight Gauge | 1 |
| 13***7Z | Bolt, M10x25 | 2 |
B2-4-1 Door, Left Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***79 | Bush, Hinge | 4 |
| 12***29 | Grommet | 1 |
B2-9-3 Seat, Passenger
| 13***7Z | Screw, M6 X 25mm Long | 4 |
| 14***6Z | Washer, M6 | 4 |
| 24***03 | Grommet, Blind,Hole Dia 9.5mm, Panel Thkness 2-3mm | 1 |
B2-8-2 Visor, Sun
| 12***56 | Bracket | 1 |
| 12***84 | Blind, Sun Visor, (Flap Type) | 1 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
B2-1-2 Cab Assembly
| 13***2Z | Bolt, M20 X 120mm | 4 |
| 13***3Z | Nut, M20 | 4 |
| 47***02 | Washer, Cab Mounting | 4 |
B2-7-3 Soundproofing, Cab Base
| 47***48 | Pin, Locating | 14 |
| 47***76 | Lining, Bulkhead | 1 |
| 47***23 | Panel, Insulation, Bulkhead | 1 |
B2-2-2 Cab Shell, Unglazed
| 12***79 | Bush, Hinge | 4 |
| 12***92 | Plate, Door Catch | 2 |
| 12***04 | Mounting, Door Stay | 2 |
B2-10-1 Seat Belt
| 47***00 | Kit-Seat Belt, Lap Type, Kit-Seat Belt, Lap Type; Drivers Seat. Contains All Parts Necessary For Installation. | 2 |
| 47***00 | Kit-Seat Belt, Lap Type | 1 |
B2-6-1 Cab, Roof Hatch
| 13***5Z | Bolt | 6 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 13***3Z | Nut | 4 |
B2-8-1 Mirrors, External
| 13***3Z | Screw, M6x16 | 4 |
| 14***6Z | Washer, M6 | 4 |
| 47***65 | Arm, Mirror, Left Hand | 1 |
B2-1-1 Cab Assembly
| 13***9Z | Bolt, M20 X 90 | 4 |
| 13***2Z | Bolt, M20 X 120mm | 4 |
| 13***3Z | Nut, M20 | 4 |
B2-3-2 Direct Glazing, Replacement Material
| 41***33 | Sealant, Dp2205 Clear, Silicone | 0 |
| 41***09 | Sealant, Black Acrylic 221, 310ml Cartridge | 0 |
| 41***43 | Adhesive, & Sealant, 310ml Cartridge | 0 |
B2-4-4 Door, Right Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***79 | Bush, Hinge | 4 |
| 12***29 | Grommet | 1 |
B2-3-1 Cab Glazing
| 47***10 | Clip, Windscreen | 2 |
| 82***68 | Glass, Front Quarter Light, Left Hand Clear; Replaced By 82***65, See San05392 | 1 |
| 82***69 | Glass, Front Quarter Light, Right Hand Clear; Replaced By 82***66, See San05392 | 1 |
B2-9-2 Seat, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-2-1 Cab Shell, Unglazed
| 12***79 | Bush, Hinge | 4 |
| 12***92 | Plate, Door Catch | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B2-7-4 Soundproofing, Cab
| 24***12 | Grommet | 1 |
| 24***06 | Grommet, 16mm Diameter | 1 |
| 24***09 | Grommet | 1 |
B2-7-1 Cab, Console, Instrument Panel, Covers & Brackets
| 12***31 | Vent, Air Register | 4 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-4-2 Door, Right Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***79 | Bush, Hinge | 4 |
| 12***29 | Grommet | 1 |
B2-7-2 Ducts, Mouldings, Floormat & Covers
| 13***5Z | Bolt, M5 X 20mm Long | 4 |
| 13***5Z | Bolt | 2 |
| 13***3Z | Nut | 4 |
B2-4-3 Door, Left Hand
| 12***01 | Key, No. 1001 | 2 |
| 12***79 | Bush, Hinge | 4 |
| 12***29 | Grommet | 1 |
B2-7-5 Soundproofing, Cab Base
| 47***48 | Pin, Locating | 3 |
| 47***76 | Lining, Bulkhead | 2 |
| 47***12 | Panel, Insulation, Floorplate L/Hand | 1 |
B2-9-1 Seat, Suspension
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***1Z | Nut, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
B2-5-1 Window, Rear Opening
| 12***01 | Handle, Right Hand, (M6) | 1 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Nut | 7 |
B2-7-6 Cab, Console, Instrument Panel, Covers & Brackets
| 12***31 | Vent, Air Register | 4 |
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
B5-1-4 Decals, External, 4ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-4-1 Decals, North American, Homologation
| 81***36 | Label, Warning, Overturn | 1 |
| 81***39 | Label, Warning Seat Belt, Micro 8008; Replaced By 81***36 | 1 |
| 81***79 | Label, Warning, General | 1 |
B5-3-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-1-2 Decals, External, 2ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-2-1 Decals, Internal
| 81***39 | Label, Warning English, Read Operating Book | 1 |
| 81***41 | Label, Warning Dutch, Read Operating Book | 1 |
| 81***43 | Label, Warning French, Read Operating Book | 1 |
B5-1-1 Decals, External, 2ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-1-0 Identification, Serial Plates
B5-9-1 Paint
| 42***04 | Paint, Red Gloss Enamel, 1 Lts | 1 |
| 42***05 | Paint, Red Gloss Enamel, 2.5 Lts | 1 |
| 42***06 | Paint, Red Gloss Enamel, 5 Lts | 1 |
B5-1-3 Decals, External, 4ws
| 81***50 | Label, Transmission Filler | 1 |
| 81***06 | Label, Hydraulic Fluid | 1 |
| 81***48 | Plate, Jcb Badge | 1 |
B5-10-1 Lubrication
| 40***01 | Oil, Jcb T/C-25 Litre, Type C3 Sae 10w | 1 |
| 40***02 | Oil, Jcb T/C-5 Litre, Type C3 Sae 10w | 1 |
| 40***03 | Oil, Jcb T/C - 200 Litres, Sae 10w | 1 |
C Electrics-Machine, Cab & Engine
C1-9-1 Horn, Single Tone
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 1 |
| 47***67 | Bracket, Horn Mounting | 1 |
C1-4-1 Electrics, Optional
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-3-3 Harness, Panel
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 47***73 | Shield, Harness | 0 |
C1-6-1 Light, Head, Left Hand Dip
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
C1-3-1 Harnesses, Chassis
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
C1-3-4 Harness, Power Range
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 47***73 | Shield, Harness | 0 |
C1-2-1 Electrical Equipment
| 14***11 | Seal, Bonded | 3 |
| 24***01 | O Ring | 1 |
| 44***05 | Washer, Seating | 1 |
C1-9-2 Horn, Single Tone
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M6x55 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-7-1 Light, Combination, Rear
| 20***09 | Tie, Cable, L=272mm X W=7.6mm | 4 |
| 70***01 | Lens, Rear Combination | 1 |
| 70***00 | Light, Rear Combination, Right Hand | 1 |
C1-7-3 Light, Reflector
| 13***5Z | Bolt | 2 |
| 13***8Z | Bolt, M12 X 30 | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
C1-8-1 Light, Beacon, Hazard Warning
| 12***01 | Plate, Beacon Mounting | 1 |
| 70***01 | Bulb, 12v 55w, Halogen | 1 |
| 70***00 | Beacon, Magnetic, (Yellow) | 1 |
C1-5-1 Harness Connectors, Sumitomo
| 72***01 | Plug, Dummy, Brown | 0 |
| 72***02 | Seal, Wire, 1.4-2.2mm Od Blue | 0 |
| 72***03 | Seal, Wire, 2.2-2.9mm Od Brown | 0 |
C1-6-2 Light, Head, Right Hand Dip
| 13***9Z | Bolt, M12x35 Grade 8.8 | 4 |
| 13***3Z | Nut, M12 | 4 |
| 14***9Z | Washer | 4 |
C1-3-5 Harnesses, Edc
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 47***73 | Shield, Harness | 0 |
C1-1-1 Battery & Carrier
| 13***3Z | Screw, M6x16 | 5 |
| 13***8Z | Screw, M8x30 | 6 |
| 13***9Z | Bolt, M10 X 35 | 1 |
C1-3-2 Harnesses, Cab Roof
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 0 |
| 20***06 | Tie, Cable, L=115mm X W=4.8mm | 0 |
| 47***73 | Shield, Harness | 0 |
C1-7-2 Light, Rear Fog
| 70***00 | Light, Rear Fog; Superseded To 70***00 See Pi L01/127., San 12819 | 1 |
| 71***00 | Harness, Fog Light, Auxiliary | 1 |
| 72***05 | Bulb, 12v 21w | 1 |
C2-1-2 Electrical Equipment
| 17***07 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-1-1 Electrical Equipment
| 17***01 | Solenoid, E.S.O.S | 1 |
| 70***00 | Switch, Vacuum Sensor | 1 |
| 70***00 | Switch, Oil Pressure | 1 |
C2-4-1 Alternator Mountings
| 02***92 | Washer | 1 |
| 02***11 | Bracket, Alternator Mounting | 1 |
| 02***22 | Bracket, Support | 1 |
C2-3-1 Alternator
| 71***01 | Capacitor, Suppression | 1 |
| 71***02 | Regulator, & Brush Box Assembly | 1 |
| 71***04 | Bearing, Slip Ring End | 1 |
C2-6-1 Engine Block Heater
| 13***3Z | Nut | 2 |
| 47***89 | Bracket, Plug Mounting | 1 |
| 71***00 | Kit-Heater, Engine Block | 1 |
C2-5-1 Motor, Starter, 12.Volt
| 02***02 | Stud | 3 |
| 02***59 | Nut | 3 |
| 12***06 | Cover, Solenoid | 1 |
C2-3-3 Alternator, 100amp
| 71***05 | Kit-Sundry Parts; 54***32 | 1 |
| 71***01 | Cover, Assembly | 1 |
| 71***00 | Alternator, 100amp; Optional. Fitted Only With 6 Front And 4 Rear Working Lights., Alternator, 100amp; Optional. Fitted Only With 6 Front And 4 Rear Working Lights Option., Alternator, 100amp, Alternator, 100amp; Optional. Fitted Only With 6 Front And 4 Rear Working Light Option. | 1 |
C2-4-2 Alternator Mountings
| 02***86 | Washer | 1 |
| 02***32 | Bracket, Alternator Mounting | 1 |
| 02***33 | Bracket, Support | 1 |
C2-3-2 Alternator, 85amp
| 71***00 | Alternator, 85amp | 1 |
| 71***01 | Cover, Assembly | 1 |
| 71***02 | Regulator | 1 |
C3-9-2 Air Conditioning, Heater Unit Assembly
| 47***25 | Grommet | 1 |
| 47***00 | Unit, Air Conditioning | 1 |
| 47***01 | Case, Air/Con. Unit | 1 |
C3-12-1 Light, Head, Right Hand Dip
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 24***05 | Grommet | 2 |
C3-4-3 Switches & Sensor, Rear Hitch Control, External
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 47***62 | Bracket, Position Sensor | 1 |
| 47***98 | Switch, Position Sensor | 1 |
C3-6-1 Fuse Box & Relays, Rear, 2ws
| 13***1Z | Nut, M5-8 | 1 |
| 13***3Z | Capscrew | 1 |
| 71***01 | Fuse, 3 Amp | 2 |
C3-8-4 Clock
| 12***90 | Clock, Digital | 1 |
C3-5-2 Fuse Box & Relays, Front, German
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***00 | Alarm, Buzzer | 1 |
| 71***00 | Relay, Time Delay | 1 |
C3-7-1 Switch, Column
| 47***09 | Gaiter, Column Switch | 2 |
| 70***01 | Column, Switch Cap | 1 |
| 70***01 | Clamp | 1 |
C3-6-2 Buzzer & Timer, Selectronic
| 70***00 | Relay, Buzzer/Timer Unit | 1 |
| 82***18 | Washer, M3 | 2 |
| 82***76 | Nut, Lock M3 | 2 |
C3-4-1 Control Panel, With Rear Hitch
| 13***3Z | Nut | 4 |
| 47***00 | Switch; A=Front Power Take-Off, B=2/4wd, C=Rear Power Take-Off. If Front And Rear Power Take-Off Fitted, Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fited., Switch, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only., Switch; A = Front Power Take-Off, B = 2wd/4wd, C = Rear Power Take-Off. If Front & Rear Power Take-Off Fitted., Switch; A=Blanked, B=2/4wd, C=Rear Power Take-Off. If Rear Power Take-Off Only, Switch; A = Blanked, B = 2wd/4wd, C = Rear Power Take-Off. If Rear Power Take-Off Only | 0 |
| 47***99 | Computer, Electronic Module | 1 |
C3-8-3 Ashtray & Lighter
| 13***3Z | Nut | 2 |
| 14***5Z | Washer, M5; Replaces 69***59 | 2 |
| 47***41 | Ashtray | 1 |
C3-9-1 Air Conditioning, & Heater, Installation
| 13***5Z | Bolt | 3 |
| 13***2Z | Bolt, M6 X 50 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 4 |
C3-8-5 Radio, Optional
| 24***12 | Grommet | 1 |
| 47***88 | Plate, Radio Blanking | 1 |
| 71***00 | Aerial | 1 |
C3-1-3 Instrumentation, Front, 30kph
| 47***06 | Block, Light, Low/High | 1 |
| 47***13 | Light, Warning, Trans Oil Pressure | 1 |
| 47***44 | Light, Block, Splitter Indicator | 1 |
C3-9-3 Filter, Air Conditioning
| 32***00 | Filter, Carbon, Cab Intake | 1 |
| 32***00 | Filter, Air, Paper; Will Be Replaced By 32/92***00 Aug 98 | 1 |
| 47***13 | Grille, Air/Con Filter | 1 |
C3-8-1 Light, Interior, Cab
| 47***12 | Bracket, Mounting, Door Light Switch | 1 |
| 70***00 | Light, Cab Interior, Assembly | 1 |
| 70***00 | Switch, Door Light | 2 |
C3-11-1 Washer Kit, Windscreen
| 13***5Z | Bolt | 3 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***6Z | Washer, M6 | 3 |
C3-12-2 Light, Working, Front & Rear
| 24***05 | Grommet | 4 |
| 70***00 | Light, Working | 2 |
| 70***00 | Light, Working | 2 |
C3-2-1 Instrument Cluster
| 70***03 | Gauge, Water Temp | 1 |
| 70***04 | Gauge, Fuel | 1 |
| 70***05 | Gauge, Hour Meter | 1 |
C3-10-1 Wash/Wipe, Windscreen
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
C3-10-2 Wash/Wipe, Rear Screen
| 24***03 | Grommet | 1 |
| 64***00 | Tube | 0 |
| 71***01 | Jet, Windscreen Washer | 1 |
C3-12-4 Light, Indicator, Side
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut | 4 |
| 14***5Z | Washer, M5; Replaces 69***59 | 4 |
C3-5-1 Fuse Box & Relays, Front
| 13***8Z | Capscrew, M5 X 30mm | 4 |
| 70***01 | Relay, Hazard/Flasher, 4 Connectors, Square | 1 |
| 70***00 | Alarm, Buzzer | 1 |
C3-6-3 Fuse Box & Relays, Rear, 2ws
| 13***1Z | Nut, M5-8 | 1 |
| 13***3Z | Capscrew | 1 |
| 70***00 | Alarm, Buzzer | 1 |
C3-12-5 Light, Number Plate
| 24***09 | Grommet; Cwe By J. Smith Purchasing 14/01/91 | 2 |
| 70***00 | Light, Number Plate | 2 |
| 72***47 | Bulb, Festoon, 12v 5w | 1 |
C3-6-4 Fuse Box & Relays, Rear, 4ws
| 13***1Z | Nut, M5-8 | 1 |
| 13***3Z | Capscrew | 1 |
| 70***00 | Alarm, Buzzer | 1 |
C3-1-1 Instrumentation, Front
| 47***05 | Block, Light, Medium/ Reverse | 1 |
| 47***06 | Block, Light, Low/High | 1 |
| 47***13 | Light, Warning, Trans Oil Pressure | 1 |
C3-4-11 Control Panel, 4ws Quadtronic
| 13***5Z | Bolt | 2 |
| 14***6Z | Washer, M6 | 2 |
| 47***40 | Gasket | 1 |
C3-10-3 Wash/Wipe, Windscreen
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
C3-4-2 Switch Panel, Draft Control
| 47***01 | Lever, Rotary Control, Large | 1 |
| 47***02 | Knob, Rotary Control, Large | 1 |
| 47***03 | Lever, Rotary Control, Small | 1 |
C3-12-3 Light, Working, Auxiliary
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
C3-8-2 Light, Ag Panel
| 47***07 | Light, Ag Panel | 1 |
| 47***73 | Frame, Mounting, Ag Panel Light | 1 |
| 72***43 | Bulb, Side Light, 12v 4w | 1 |
C3-3-1 Instrumentation, Rear
| 15***01 | Key, Ignition, 92274 | 2 |
| 24***08 | Grommet, Blind | 1 |
| 47***53 | Switch, Working Light | 1 |
C3-1-2 Instrumentation, Front, German
| 47***05 | Block, Light, Medium/ Reverse | 1 |
| 47***06 | Block, Light, Low/High | 1 |
| 47***12 | Light, Indicator, Abs, 2nd Trailer Turn | 1 |
D Controls-Machine, Engine & Steering
D1-10-1 Control, 4 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-5-3 Clutch Servo
| 15***08 | Screw, Bleed, 3/8"Unf | 1 |
| 15***26 | Screw Bleed | 1 |
| 47***00 | Clutch, Servo | 1 |
D1-1-1 Gearshift, 5 Or 6 Speed Gearbox
| 12***02 | Plate, Compression | 2 |
| 13***5Z | Bolt | 6 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
D1-12-1 Control, Pick Up Hitch
| 13***3Z | Screw, M6x16 | 2 |
| 14***9Z | Washer | 1 |
| 23***20 | Knob, Control Lever | 1 |
D1-3-11 Gearshift, Air Assisted, Range Change & 4ws Axle Stop
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
D1-11-1 Control, Valve Flow
| 14***02 | Screw | 2 |
| 22***12 | Circlip | 2 |
| 25***33 | Knob, Control; Same As 47***17 | 1 |
D1-4-3 Controls, Brake & Clutch
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
D1-5-1 Clutch Actuation
| 13***6Z | Bolt | 4 |
| 13***0Z | Bolt, M6 X 40mm Long | 2 |
| 13***7Z | Bolt, M10x25 | 3 |
D1-13-1 Control, Ladder Hitch Release
| 13***3Z | Screw, M6x16 | 4 |
| 13***7Z | Screw, M6 X 25mm Long | 2 |
| 14***9Z | Washer | 1 |
D1-7-1 Contr0l, Power Take Off
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 2 |
| 13***3Z | Nut, Self Lock, M6 | 3 |
| 13***7Z | Capscrew, Socket Head | 2 |
D1-5-4 Clutch, Master Cylinder
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***04 | Washer, Copper | 1 |
| 15***00 | Cylinder, Master | 1 |
D1-6-1 Brake, Parking, Installation
| 12***54 | Flange, Swivel | 1 |
| 13***4Z | Bolt, Bolt; To Secure The Diagonal Edge. Used To M602765 (926) And M608319 (930) | 2 |
| 13***3Z | Screw, M6x16 | 3 |
D1-3-2 Filter, Air, & Regulator, Pneumatic
| 47***55 | Filter, Air Regulator, Assembly | 1 |
| 47***50 | Bowl | 1 |
| 47***51 | Filter, Air | 1 |
D1-9-1 Control, 2 Spool Valve
| 13***3Z | Screw, M6x16 | 2 |
| 13***5Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-3-3 Valve Assembly, Pneumatic
| 47***54 | Elbow | 1 |
| 47***56 | Manifold, Valve | 1 |
| 47***57 | Plug, Gallery | 3 |
D1-6-2 Brake, Parking
| 47***70 | Handle, Grip | 1 |
| 47***71 | Button | 1 |
| 47***72 | Spring, Compression | 1 |
D1-4-1 Controls, Brake & Clutch
| 13***8Z | Screw, M8x30 | 2 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
D1-6-3 Brake Caliper, Parking
| 47***40 | Kit-Lever | 1 |
| 47***41 | Kit-Clip, Anti-Rotation | 1 |
| 47***42 | Kit-Spring | 1 |
D1-3-4 Ram, Assembly, Pneumatic Gearchange
| 47***95 | Kit-Nut & Bolt | 8 |
| 47***21 | Kit-Seal | 1 |
| 47***22 | Switch, & Connector Assembly | 1 |
D1-5-2 Clutch, Master Cylinder
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 2 |
| 14***04 | Washer, Copper | 1 |
| 15***00 | Reservoir, & Cap Assembly | 1 |
D1-4-2 Controls, Brake & Clutch
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Setscrew, M8x35 | 1 |
| 13***0Z | Bolt, M10 X 40 | 1 |
D1-6-11 Brake, Parking, Installation
| 13***5Z | Bolt | 4 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
D1-3-12 Valve, Air, 4ws
| 47***69 | Adapter, Straight Connector | 1 |
| 47***05 | Adapter, Elbow | 2 |
| 47***00 | Valve, Air, 4ws | 1 |
D1-3-1 Gearshift, Air Assisted, Range Change, 2ws
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***1Z | Bolt, M10 X 45mm | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
D2-1-2 Control, Throttle
| 13***5Z | Bolt | 2 |
| 13***8Z | Screw, M6 X 30mm Long | 1 |
| 13***1Z | Nut | 2 |
D2-1-1 Control, Throttle
| 13***1Z | Setscrew, M6 X 12mm Long | 2 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***1Z | Washer, M16 Plain | 2 |
D3-1-1 Steering Wheel, Installation
| 12***45 | Cap | 1 |
| 12***47 | Plug, Blanking, Plug, Blanking; Supplied With 12***00. For Use Without Spinner Knob | 1 |
| 12***00 | Wheel, Steering | 1 |
E Hydraulics Including Steering, & Suspension
E1-4-12 Circuit, Steering, 4ws, (Fig.2)
| 13***9Z | Bolt, M8 X 90mm Long | 2 |
| 13***6Z | Bolt | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
E1-2-3 Circuit, Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E1-2-1 Circuit, Transmission, Cooling, 2ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-4-1 Circuit, Steering, 2ws
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***8Z | Screw, M8x30 | 6 |
E1-3-1 Circuit, 2/4wd, Front & Rear Pto
| 13***9Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E1-7-1 Circuit, Front Hitch
| 13***3Z | Nut, Back 3/8" Bsp | 1 |
| 23***06 | O Ring, 3/8"Bsp | 8 |
| 24***05 | O Ring | 1 |
E1-2-2 Circuit, Transmission
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 3 |
| 14***21 | Seal, Bonded 3/4" Bsp | 3 |
E1-13-1 Circuit, Auxiliary, 3/4 Spool, Rear
| 22***51 | Circlip | 12 |
| 22***53 | Circlip | 6 |
| 24***10 | O Ring | 6 |
E1-4-11 Circuit, Steering, 4ws, (Fig.1)
| 12***03 | Tie, Cable, L=300mm X W=7.6mm | 1 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 13***8Z | Screw, M8x30 | 6 |
E1-6-1 Circuit, Rear Hitch
| 13***7Z | Bolt, M10x25 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 1 |
E1-1-11 Circuit, Neutral, 4ws
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M12x30 | 2 |
E1-15-1 Circuit, Auxiliary, Free Flow Return, Rear, 2ws
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-1-1 Circuit, Neutral, 2ws
| 13***7Z | Screw, Hexagon M8 X 25 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***8Z | Capscrew, M12x30 | 2 |
E1-14-1 Circuit, Auxiliary, 4 Spool, Front, With Hitch, 2ws
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-14-12 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray, 4ws
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
E1-2-11 Circuit, Transmission, Cooling, 4ws
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 7 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
E1-14-11 Circuit, Auxiliary, 4 Spool, Front, With Hitch, 4ws
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
E1-8-1 Circuit, Auxiliary, 2 Spool, Rear
| 13***9Z | Bolt, M8 X 35mm | 2 |
| 13***2Z | Nut, Lock | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
E1-20-1 Circuit, Flow Divider, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
| 13***8Z | Screw, M8x30 | 2 |
| 13***6Z | Bolt, M8 X 70 | 2 |
E1-16-11 Circuit, Auxiliary, Free Flow Return, Front, 4ws
| 13***7Z | Screw, Hexagon M8 X 25 | 5 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 5 |
E1-14-2 Circuit, Auxiliary, 4 Spool, Front, With Weight Tray, 2ws
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***9Z | Setscrew, M8x35 | 2 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
E1-11-1 Circuit, Auxiliary, 3 Spool, Front
| 13***8Z | Screw, M8x30 | 2 |
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 2 |
| 13***3Z | Nut, Self Lock, M8 | 4 |
E1-5-1 Circuit, Differential Lock
| 16***01 | Adapter; Early M/C'S Will Have Bonded Seals,Not'O'Ring. For Adapters On Early M/C'S See Steer Valve Page, E3., Adapter, Adapter; Early M/Cs Will Have Bonded Seals,Not'O'Rings. For Adapters On Earlier M/Cs See Steer Valve Page, E3. | 1 |
| 24***03 | O Ring | 1 |
| 47***33 | Adapter, M12 X 1/4" Bsp M | 1 |
E1-15-11 Circuit, Auxiliary, Free Flow Return, Rear, 4ws
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
E1-16-1 Circuit, Auxiliary, Free Flow Return, Front, 2ws
| 13***7Z | Screw, Hexagon M8 X 25 | 5 |
| 13***9Z | Bolt, M12x35 Grade 8.8 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 5 |
E1-3-2 Circuit, 2/4wd, Front & Rear Pto
| 13***9Z | Bolt | 1 |
| 13***3Z | Nut, Self Lock, M6 | 1 |
| 14***15 | Washer, Seal; Replaces Khj0891 | 2 |
E2-1-1 Pump, Steer & Suspension
| 13***5Z | Capscrew | 2 |
| 20***08 | Cap | 1 |
| 20***09 | Kit-Repair, Relief Valve | 1 |
E2-3-2 Pump, Auxiliary, 77 Litre, 4ws
| 20***01 | Kit-Seal | 1 |
| 20***00 | Pump, Main Hydraulic, Triple | 1 |
| 20***01 | Kit-Bolt | 1 |
E2-2-1 Pump, Auxiliary, 60 Litre, 2ws
| 20***00 | Pump, Auxiliary, 25cc; Check Id Plate For : 550/1/35271 | 1 |
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
E2-3-1 Pump, Auxiliary, 60 Litre, 4ws
| 20***00 | Pump, Main Hydraulic, Triple | 1 |
| 20***01 | Kit-Seal | 1 |
| 20***02 | Kit-Bolt | 1 |
E2-2-2 Pump, Auxiliary, 77 Litre, 2ws
| 20***02 | Kit-Screw | 1 |
| 20***03 | Kit-Seal, Pump | 1 |
| 20***00 | Pump, Auxiliary, 32cc; Check Id Plate For: 550/1/35272 | 1 |
E3-11-1 Filter, Hydraulic, Tank Mounted
| 58***12 | Element, Filter, 10 Micron | 1 |
| 58***02 | O Ring | 1 |
| 58***04 | Seal | 1 |
E3-2-1 Valve Section, Inlet, With Main Relief
| 25***01 | Valve, Section, Inlet, C/W M.R.V | 1 |
| 25***11 | Valve, Main Relief | 1 |
| 25***12 | Plug | 1 |
E3-1-2 Valve, Assembly, 3 Spool & Adapters
| 13***3Z | Bolt, M8 X 55 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 16***06 | Adapter | 1 |
E3-1-3 Valve, Assembly, 4 Spool & Adapters
| 13***3Z | Bolt, M8 X 55 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 24***11 | O Ring | 1 |
E3-5-2 Valve, Section, Draft Control, Solenoid Operated
| 25***13 | Spring, Compression | 1 |
| 25***14 | Shim, 0.5mm | 0 |
| 25***15 | Shim, 0.3mm | 0 |
E3-7-1 Valve, Solenoid
| 13***1Z | Screw, M5 X 12mm; Replaces 69***94 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 13***9Z | Capscrew, M8 X 90mm | 2 |
E3-5-1 Valve, Section, Draft Control, Solenoid Operated
| 25***02 | Cap, Rubber | 1 |
| 25***03 | Kit, Solenoid | 2 |
| 25***05 | Valve, Section, Draft Control | 1 |
E3-4-1 Valve, Section, 3rd & 4th Spool
| 25***04 | Valve, Section, 3rd & 4th Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-7-2 Valve, Control, 4ws
| 13***8Z | Capscrew, M5 X 30 | 4 |
| 25***00 | Valve, Solenoid | 1 |
| 25***01 | Coil | 2 |
E3-9-1 Valve, Relief, C/W, Reverse Flow Check
| 25***10 | Kit-Seal | 1 |
| 25***00 | Valve, Reverse Flow | 1 |
| 25***01 | Cartridge, Relief Valve | 1 |
E3-1-1 Valve, Assembly, 2 Spool & Adapters
| 13***3Z | Bolt, M8 X 55 | 4 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 4 |
| 23***15 | O Ring, 3/4"Bsp | 1 |
E3-3-1 Valve, Section, 1st & 2nd Spool
| 25***02 | Valve, Section, 1st & 2nd Spools | 1 |
| 25***20 | O Ring | 1 |
| 25***22 | Cap, Spool End | 1 |
E3-8-1 Valve, Charge
| 25***67 | Kit-Seal | 1 |
| 25***11 | Kit-Seal | 1 |
| 25***01 | Kit-Seal | 1 |
E3-9-2 Valve, Flow Regulator, Diverter
| 25***02 | Coil, 12v | 1 |
| 25***00 | Valve, Priority, Flow Divider | 1 |
| 25***01 | Valve, Relief, Cartridge | 1 |
E3-12-1 Filter, Transmission Oil
| 32***00 | Filter, Assembly | 1 |
| 32***01 | Element, Oil Filter, Transmission 22 Microns | 1 |
| 32***30 | Indicator, Assembly | 1 |
E3-10-1 Valve, Steering
| 35***02 | Ring; San 23101.Cwe To Nla | 1 |
| 35***04 | Bearing, Front | 1 |
| 35***05 | Bearing; Use 35/40***04 | 1 |
E4-5-1 Ram, Rear Hitch, 75mm
| 47***00 | Ram, Single Acting, 75mm Plunger Type, Ram, Single Acting, 75mm Plunger Type; Cat 2-3 Hitch. For Parts See Frame E4-1-2 | 2 |
| 47***01 | Kit-Seal | 1 |
| 47***02 | Rod, Assembly | 1 |
E4-2-2 Ram, Suspension, 'Cushioned', Optional 45mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***13 | Cover, Protective Tube | 1 |
E4-2-3 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-1-2 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-1-1 Ram, Suspension, 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-2-1 Ram, Suspension, 'Cushioned', Standard 40mm
| 47***04 | Bearing, & Spring Ring Assembly | 2 |
| 47***05 | Nipple, Grease | 2 |
| 47***07 | Cover, Protective Tube | 1 |
E4-4-1 Ram, Front Hitch, 60mm
| 47***39 | Kit-Seal | 1 |
| 47***40 | Cylinder | 1 |
| 47***41 | Nut | 1 |
E4-2-4 Ram, Suspension, 'Cushioned', Optional 45mm
| 47***04 | Bearing, & Spring Ring Assembly | 1 |
| 47***05 | Nipple, Grease | 2 |
| 47***13 | Cover, Protective Tube | 1 |
E4-6-1 Power Track Rod
| 13***6Z | Bolt | 4 |
| 47***60 | Cylinder, Power Track Rod | 1 |
| 47***61 | Plug | 2 |
E4-5-3 Ram, Rear Hitch, 75mm
| 47***00 | Ram, Rear Hitch, 75mm Dia, Hydraulic | 1 |
E4-5-2 Ram, Rear Hitch, 80mm
| 47***03 | Bearing, Assembly | 1 |
| 47***04 | Bearing, Assembly | 1 |
| 47***53 | Nipple, Grease | 1 |
E4-3-1 Ram, Steering
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 1 |
| 13***5Z | Nut, Castle | 1 |
| 14***9Z | Washer | 1 |
F Axles, Wheels & Transmission
F1-1-3 Axle Assembly, Front, 2ws, 65kph
| 13***09 | Bolt, Micro Encapsulated | 12 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-12-2 Hub & Components, Front Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-12-1 Hub & Components, Front Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-11-3 Axle Assembly, Front, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***09 | Bolt, Micro Encapsulated | 12 |
F1-13-3 Axle Drive Head
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
F1-11-1 Axle Assembly, Front, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***09 | Bolt, Micro Encapsulated | 12 |
F1-2-1 Hub & Components, Front Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-4-1 Differential, Components, 'Maxtrac'
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
F1-14-1 Differential, Components, No Spin
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-11-2 Axle Assembly, Front, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***09 | Bolt, Micro Encapsulated | 12 |
F1-13-1 Axle Drive Head, No Spin Differential
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
F1-3-2 Axle Drive Head, No Spin Differential
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
F1-4-2 Differential, Components, No Spin
| 45***00 | Differential, No-Spin | 1 |
| 45***01 | Spring | 2 |
| 45***00 | Case, Differential Assembly | 1 |
F1-1-1 Axle Assembly, Front, 2ws, 40kph
| 13***09 | Bolt, Micro Encapsulated | 12 |
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, M12 | 8 |
F1-1-4 Axle Assembly, Front, 2ws, No Spin Diff, 65kph
| 13***09 | Bolt, Micro Encapsulated | 12 |
| 13***8Z | Bolt | 4 |
| 13***09 | Capscrew, Micro Encapsulated | 16 |
F1-3-3 Axle Drive Head, Maxtrac
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
F1-3-1 Axle Drive Head
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 45***01 | Housing, Drivehead, Painted Black | 1 |
F1-14-2 Differential, Components, 'Maxtrac'
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 8 |
| 45***00 | Kit-Gear, Differential | 1 |
| 45***01 | Pin, Trunnion | 2 |
F1-13-2 Axle Drive Head, No Spin Differential
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
F1-2-2 Hub & Components, Front Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F1-3-4 Axle Drive Head, No Spin Differential, 65kph
| 44***02 | Spacer, Collapsible | 1 |
| 44***05 | Nut, Adjusting | 2 |
| 44***01 | Casting, Drive Head, Yellow | 1 |
F1-1-2 Axle Assembly, Front, 2ws, No Spin Diff, 40kph
| 13***09 | Bolt, Micro Encapsulated | 12 |
| 13***8Z | Bolt | 4 |
| 13***3Z | Nut, M12 | 8 |
F2-3-2 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F2-2-2 Hub & Components, Rear Right Hand
| 13***7Z | Bolt, M10x25 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-4-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***00 | Differential, Assembly, (Soft Engage) | 1 |
F2-1-3 Axle Assembly, Rear, 2ws, 65kph
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-3-1 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F2-14-2 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F2-14-1 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***00 | Differential, Assembly, (Soft Engage) | 1 |
F2-1-1 Axle Assembly, Rear, 2ws, 40kph
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-1-2 Axle Assembly, Rear, 2ws, 40kph
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-2-3 Hub & Components, Rear Left Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-12-2 Hub & Components, Rear Right Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-13-2 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F2-2-4 Hub & Components, Rear Right Hand
| 13***7Z | Bolt, Coated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-11-1 Axle Assembly, Rear, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt, M16x65 | 4 |
F2-13-1 Axle Drive Head
| 13***17 | Bolt | 2 |
| 22***07 | Circlip | 1 |
| 44***05 | Spacer, Collapsible | 1 |
F2-12-1 Hub & Components, Rear Left Hand
| 13***07 | Bolt, Micro Encapsulated | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 4 |
| 45***08 | Pad, Thrust | 1 |
F2-11-2 Axle Assembly, Rear, 4ws
| 13***7Z | Bolt | 2 |
| 13***3Z | Screw, M8 X 16 | 2 |
| 13***5Z | Bolt, M16x65 | 4 |
F2-2-1 Hub & Components, Rear Left Hand
| 13***7Z | Bolt, M10x25 | 2 |
| 22***54 | Circlip; Replaces 370a0400z, San 12455 | 3 |
| 45***05 | Gear, Annulus Ring | 1 |
F2-1-4 Axle Assembly, Rear, 2ws, 65kph
| 13***5Z | Bolt, M16x65 | 4 |
| 13***3Z | Nut, M16 | 4 |
| 14***21 | Seal, Bonded 3/4" Bsp | 2 |
F2-4-2 Differential, Assembly
| 13***24 | Bolt, M10 X 140mm Long | 8 |
| 45***03 | Pin, Trunnion, 163mm Long | 2 |
| 45***01 | Plate, Friction | 10 |
F3-3-2 Wheels & Tyres, 540/65-R28 & R30
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-3-3 Wheels & Tyres, 16.9-R28 & R30
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-3-1 Wheels & Tyres, 420/70r28, 480/70r30
| 13***5Z | Bolt, M12x20 | 2 |
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
F3-3-4 Wheels & Tyres, 580/70-R26 Xm27
| 14***9Z | Washer | 2 |
| 15***01 | Valve | 1 |
| 41***00 | Rim, Wheel Dw20a | 1 |
F3-4-1 Wheel Chocks, German
| 14***2Z | Washer | 2 |
| 47***09 | Bolt, Wing | 2 |
| 47***10 | Clamp, Wheel Chock | 2 |
F3-4-2 Wheel Chocks, German
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
| 47***27 | Clamp, Wheel Chock, Upper | 1 |
| 47***28 | Clamp, Wheel Chock, Lower | 1 |
F3-1-1 Propshafts, Axle Drive
| 11***25 | Strap | 6 |
| 13***3Z | Nut | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 12 |
F5-2-10 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-8 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-1-1 Transmission, Gearbox Assembly, Manual Range Shift
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Range | 1 |
F5-2-7 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-3-1 Pipework, Gearbox Balance
| 13***5Z | Screw, Set, M8 X 20 | 3 |
| 13***7Z | Bolt, Coated | 4 |
| 22***10 | Clip, Jubilee | 2 |
F5-2-3 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-12 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-9 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-2 Transmission Gearbox, Assembly, 40kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 1:1.225, Twin Power Take-Off, 50kph | 1 |
F5-2-11 Transmission Gearbox, Assembly, 30kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-2-4 Transmission Gearbox, Assembly, 50kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 6 Speed | 1 |
F5-4-1 Dipstick & Filler, Transmission
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***7Z | Screw, Hexagon M8 X 25 | 1 |
| 13***3Z | Bolt, M12x55 | 1 |
F5-2-1 Transmission Gearbox, Assembly, 40kph, Selectronic
| 13***9Z | Bolt, M10 X 35 | 21 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Gearbox, Assembly, 1:1.225, Single Power Take-Off, 50kph | 1 |
F6-4-1 Shaft Group, Output
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
| 45***07 | Hub, Sleeve | 1 |
F6-1-7 Gearbox, Range, 30kph
| 13***07 | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
F6-5-2 Shaft, Output Group, 4 Wheel Drive
| 22***63 | Circlip; Replaces 370a0100z | 1 |
| 22***71 | Circlip | 1 |
| 22***23 | Circlip | 1 |
F6-6-2 Gear Change, Selectronic, Selector Shafts & Forks
| 44***31 | Roller, Baulk | 1 |
| 44***10 | Screw | 3 |
| 45***18 | Block, Selector | 1 |
F6-4-2 Shaft Group, Output
| 22***94 | Circlip | 2 |
| 22***85 | Circlip, Internal | 1 |
| 45***02 | Washer, Thrust | 1 |
F6-1-3 Gearbox, Range, 3okph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F6-1-1 Gearbox, Range, 50kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F6-7-2 Gear Change, Air Assisted, 30kph
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-3-2 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 22***94 | Circlip | 2 |
| 45***02 | Gear, Input 40t | 1 |
F6-1-4 Gearbox, Range, 3okph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F6-5-1 Shaft, Output Group, 4 Wheel Drive
| 14***14 | Washer | 1 |
| 22***71 | Circlip | 1 |
| 22***04 | Circlip | 1 |
F6-1-5 Gearbox, Range, 50kph
| 13***07 | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
F6-1-2 Gearbox, Range, 50kph
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
| 45***17 | Shaft, Idler Gear; Part S/Seded By M.S.S, Use 45***01 With 2 O, Ff Bearing 90***00. | 1 |
F6-3-1 Shaft, Input, And Reverse Gear
| 13***9Z | Capscrew | 1 |
| 45***02 | Gear, Input 40t | 1 |
| 45***49 | Plunger | 3 |
F6-1-8 Gearbox, Range, 30kph
| 13***07 | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
F6-2-2 Gearbox Housing
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
F6-6-1 Gear Change, Manual Shift
| 13***5Z | Bolt | 4 |
| 44***21 | Gaiter, Gear Change | 1 |
| 44***23 | Pin | 1 |
F6-1-6 Gearbox, Range, 50kph
| 13***07 | Capscrew | 1 |
| 13***10 | Capscrew, M10 X 40 | 1 |
| 45***20 | Gear, Reverse Idler | 1 |
F6-7-1 Gear Change, Air Assisted
| 13***0Z | Bolt, M8x40 | 2 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 4 |
| 13***8Z | Bolt, M10 X 30 | 4 |
F6-2-1 Gearbox Housing
| 13***5Z | Bolt | 4 |
| 13***7Z | Bolt, Coated | 3 |
| 13***8Z | Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid, Bolt; Does Not Require Locking Fluid. 1321/---- Fastener Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt, Bolt; Does Not Require Locking Fluid. 1321/---- Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid., Bolt; Does Not Require Locking Fluid. 1321/----Fasteners Are Red Or Pink Over 1st Few Threads And Do Not Require Locking Fluid. | 2 |
F7-4-1 Gearbox, 5/6 Speed, Input Shaft Assembly
| 45***49 | Plunger | 3 |
| 45***50 | Roller, 8mm | 3 |
| 45***51 | Spring, Synchro | 3 |
F7-6-1 Gearbox, 5/6 Speed, Front Cover Assembly
| 45***21 | Washer, Spring, M12 | 4 |
| 45***28 | Washer, Spring | 5 |
| 45***32 | Screw, M12 | 4 |
F7-10-1 Gearbox, Repair Kits
| 45***04 | Kit, Seal | 1 |
| 45***05 | Kit, Bearing | 1 |
| 45***06 | Kit, Circlip | 1 |
F7-7-1 Gearbox, 5/6 Speed, Rear Housing
| 45***28 | Washer, Spring | 4 |
| 45***46 | Housing, Seal | 1 |
| 45***47 | Seal, Oil | 1 |
F7-1-1 Gearbox, 5/6 Speed, Installation
| 12***02 | Plate, Compression | 2 |
| 13***4Z | Bolt, M16x60 | 2 |
| 13***1Z | Bolt, M16 X 110; See Item 14 For Protection Cap. Front Left Hand Bolt Threads Require Item 14, Bolt, M16 X 110 | 2 |
F7-3-1 Gearbox, 5/6 Speed, Mainshaft Assembly
| 45***01 | Gear, Output 31t | 1 |
| 45***06 | Kit, Circlip | 2 |
| 45***44 | Gear, 3rd | 1 |
F7-8-1 Gearbox, 5/6 Speed, Selector Controls
| 45***22 | Pin | 1 |
| 45***29 | Screw, Set | 1 |
| 45***95 | Block, Selector | 1 |
F7-9-2 Gearbox, 5 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 2 |
| 13***5Z | Bolt | 2 |
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 1 |
F7-9-1 Gearbox, 6 Speed, Remote Control Assy
| 12***90 | Tie, Cable 175mm Long, L=180mm X W=9.0mm | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
F7-2-1 Gearbox, 5/6 Speed, Case Assemblies
| 45***12 | Bush, Selector Shaft | 2 |
| 45***13 | Plug, Cup | 2 |
| 45***14 | Dowel, 16.0mm Dia X 30.5 Lg | 4 |
F7-5-1 Gearbox, 5/6 Speed, Counter Shaft Assy
| 45***63 | Circlip, 2.12mm | 1 |
| 45***64 | Circlip, 2.07mm | 1 |
| 45***65 | Circlip, 2.02mm | 1 |
F8-3-1 Gearbox, Splitter & Pto, Input & Clutch Release
| 13***7Z | Bolt, Coated | 6 |
| 13***9Z | Screw, M10 X 35 | 9 |
| 22***58 | Circlip, Internal | 1 |
F8-7-1 Gearbox, Splitter & Pto, Solenoid Assembly
| 13***2Z | Capscrew | 4 |
| 13***8Z | Capscrew, M5 X 30 | 8 |
| 14***7Z | Washer, Spring | 4 |
F8-2-1 Gearbox, Splitter & Pto, Clutch Pack Installation, 1.26 : 1
| 13***7Z | Bolt, M10x25 | 12 |
| 13***5Z | Bolt | 5 |
| 13***9Z | Screw, M10 X 35 | 21 |
F8-9-2 Clutch Assembly, Power Take Off, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 21***04 | Dowel | 3 |
| 22***60 | Circlip | 1 |
F8-2-2 Gearbox, Splitter & Pto, Clutch Pack Installation, 1.225 : 1
| 13***7Z | Bolt, M10x25 | 12 |
| 13***5Z | Bolt | 5 |
| 13***9Z | Screw, M10 X 35 | 21 |
F8-5-1 Gearbox, Splitter & Pto, Selector Mechanism
| 13***7Z | Bolt, Coated | 6 |
| 14***21 | Seal, Bonded 3/4" Bsp | 1 |
| 44***10 | Screw | 1 |
F8-1-3 Gearbox, Splitter, Single Pto, 1.225 : 1
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F8-1-4 Gearbox, Splitter, C/W Front & Rear Pto, 1.225 : 1
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-3-2 Gearbox, Splitter & Pto, Input & Clutch Release
| 13***7Z | Bolt, Coated | 6 |
| 13***9Z | Screw, M10 X 35 | 9 |
| 13***1Z | Nut | 2 |
F8-6-2 Gearbox, Splitter & Pto, Selector Clutch Packs
| 44***04 | Retainer, Spring | 2 |
| 44***05 | Baffle, Oil | 2 |
| 44***07 | Plate, Counter | 12 |
F8-8-1 Clutch Assembly, Power Take Off, Front
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
| 14***33 | Washer, Bonded | 1 |
| 22***60 | Circlip | 1 |
F8-10-1 Clutch
| 13***6Z | Bolt | 8 |
| 13***8Z | Bolt, M10 X 30 | 2 |
| 47***01 | Dowel | 1 |
F8-4-1 Gearbox, Splitter & Pto, Gear Group, Output & Intermediate
| 13***5Z | Bolt | 5 |
| 22***28 | Circlip | 1 |
| 22***62 | Circlip, Internal | 1 |
F8-1-2 Gearbox, Splitter, C/W Front & Rear Pto, 1.26 : 1
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 45***00 | Clutch, Assembly, Front Power Take-Off | 1 |
F8-9-1 Clutch Assembly, Power Take Off, Rear
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 3 |
| 21***04 | Dowel | 3 |
| 22***60 | Circlip | 1 |
F8-6-1 Gearbox, Splitter & Pto, Selector Clutch Packs
| 22***15 | Circlip | 2 |
| 44***04 | Retainer, Spring | 2 |
| 44***05 | Baffle, Oil | 2 |
F8-1-1 Gearbox, Splitter, Single Pto, 1.26 : 1
| 13***7Z | Bolt, M10x25 | 12 |
| 13***7Z | Bolt, M12 X 75 | 8 |
| 14***18 | Seal, Bonded, 1/2" Bsp | 1 |
F9-11-1 Propshaft, Power Take Off, Rear
| 11***25 | Strap | 4 |
| 82***92 | Screw, Special 3/8unf X 3/4 | 8 |
| 91***01 | Kit-Spider, Cap D=35mm X 125 | 2 |
F9-10-1 Power Take Off, Rear Installation
| 47***06 | Shaft, Adapter Power Take-Off 1.3/8", 21 & 6 Splines | 1 |
| 47***25 | Cover, 1 3/8" Power Take-Off | 1 |
| 47***01 | Shaft, Adapter Power Take-Off 1.3/4", 20 Splines Both Ends | 1 |
F9-12-1 Guard, Rear, Power Take Off
| 13***7Z | Bolt, M10x25 | 2 |
| 13***5Z | Bolt, M12x20 | 3 |
| 13***3Z | Nut, Lock, M10 | 2 |
F9-3-1 Guard, Static, Power Take Off, Front - French
| 13***1Z | Nut | 1 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-2-2 Gearbox, Power Take Off, Front, ( Single )
| 13***8Z | Screw, M8x30 | 6 |
| 47***00 | Gearbox, Power Take-Off Single Direction | 1 |
| 47***01 | Casing, Shaft | 1 |
F9-12-2 Guard, Rear, Power Take Off, Static, French
| 13***1Z | Nut | 3 |
| 13***3Z | Nut, Lock, M10 | 3 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
F9-1-2 Power Take Off, Front Attachments, ( Single )
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***3Z | Bolt | 3 |
F9-1-1 Power Take Off, Front Attachments
| 11***25 | Strap | 2 |
| 13***3Z | Screw, M8 X 16 | 3 |
| 13***0Z | Bolt, M10 X 40 | 16 |
F9-2-1 Gearbox, Front P.T.O Transfer
| 13***5Z | Screw, Hexagon M8 X 20mm Long | 6 |
| 13***3Z | Bolt, M10 X 55 | 13 |
| 21***07 | Dowel | 2 |
F9-3-2 Guard, Static, Front Power Take Off, Single, French
| 13***1Z | Nut, M8 | 3 |
| 13***3Z | Nut, Self Lock, M8 | 3 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 6 |
G Brakes
G1-20-1 Pump, Antifreeze, Installation, Air Brake Circuit
| 13***0Z | Bolt | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 2 |
G1-4-1 Brake Caliper, Rear
| 47***02 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 1 |
| 47***08 | Nipple, Grease | 1 |
| 47***11 | Piston | 2 |
G1-9-11 Brakes, Trailer, Air, Charge Circuit
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 5 |
G1-11-1 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm With Seal - Red | 1 |
| 45***01 | Cap, Dust, Red | 1 |
| 45***02 | Kit-Repair | 1 |
G1-10-1 Brakes, Trailer Air, Single Line, Optional
| 13***9Z | Bolt, M10 X 35 | 2 |
| 13***1Z | Nut | 6 |
| 14***8Z | Washer, Plain M10; San 23620 Ref Dave Bickerton Confirms Identic, Al To 33***8z Rationalise Parts | 6 |
G1-31-1 Valve, Trailer Brake, Hydraulic
| 25***00 | Valve, Trailer Brake | 1 |
| 25***01 | Kit-Repair | 1 |
| 25***02 | Kit-Seal | 1 |
G1-2-1 Brake System, Charge Circuit
| 13***7Z | Bolt, M10x25 | 2 |
| 13***2Z | Nut | 2 |
| 13***3Z | Nut, Lock, M10 | 2 |
G1-21-1 Pump, Antifreeze, Air Trailer Brakes
| 47***00 | Pump, Antifreeze | 1 |
| 47***01 | Kit-Repair | 1 |
| 47***02 | Reservoir | 1 |
G1-11-3 Couplings, Palm, Trailer Brakes, Twin Palm
| 45***00 | Coupling, Palm, Yellow | 1 |
| 45***00 | Coupling, Palm, Red | 1 |
| 99***01 | Kit-Repair, Palm Coupling, Red/Yellow | 1 |
G1-5-1 Brake Caliper, Parking
| 47***40 | Kit-Lever | 1 |
| 47***41 | Kit-Clip, Anti-Rotation | 1 |
| 47***42 | Kit-Spring | 1 |
G1-1-1 Brake, System, 2ws
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
| 13***2Z | Bolt, M16x50m | 2 |
G1-8-1 Brakes, Trailer, Air, Twin Line Palm
| 02***17 | Olive, 16mm | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Screw, M6 X 50 | 2 |
G1-8-2 Brakes, Trailer, Air, Twin Line 'C' Coupling
| 02***17 | Olive, 16mm | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Screw, M6 X 50 | 2 |
G1-15-1 Valve, Trailer Brake
| 15***00 | Valve, Control | 1 |
| 15***01 | Kit-Repair | 1 |
| 15***02 | Screw, Exhaust | 1 |
G1-12-1 Coupling 'C', Trailer Brakes
| 14***2Z | Washer, M20 | 2 |
| 45***00 | Coupling, 'C' Type, Female, C/W Shut Off, Red | 1 |
| 45***01 | O Ring | 1 |
G1-14-1 Valve, Auto-Drain
| 15***00 | Valve, Auto Drain, Dv.3 | 1 |
| 15***01 | Kit-Repair, Auto Drain Valve | 1 |
G1-3-1 Brake Caliper, Front
| 47***06 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 2 |
| 47***08 | Nipple, Grease | 1 |
| 47***09 | Piston | 2 |
G1-16-2 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 99***05 | Kit-Repair, Inverse Relay Valve | 1 |
G1-13-1 Valve, Unloader
| 15***00 | Valve, Unloader | 1 |
| 15***01 | Kit-Repair, Unloader Valve | 1 |
G1-11-4 Couplings, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Black | 1 |
| 99***02 | Kit-Repair, Palm Coupling, Black | 1 |
G1-8-11 Brakes, Trailer, Air, Twin Line Palm
| 02***17 | Olive, 16mm | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Screw, M6 X 50 | 2 |
G1-4-11 Brake Caliper, Rear, 4ws
| 47***02 | Kit-Brake Pad, C/W Pins & Springs, One Axle Set | 1 |
| 47***08 | Nipple, Grease | 1 |
| 47***11 | Piston | 2 |
G1-15-2 Valve, Trailer Brake, (German)
| 15***02 | Screw, Exhaust | 1 |
| 15***03 | Cover, Dust | 1 |
| 15***04 | Lever | 1 |
G1-8-12 Brakes, Trailer, Air, Twin Line 'C' Coupling
| 02***17 | Olive, 16mm | 1 |
| 13***3Z | Screw, M6x16 | 2 |
| 13***2Z | Screw, M6 X 50 | 2 |
G1-1-11 Brake, System, 4ws
| 13***8Z | Bolt | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 1 |
| 13***2Z | Bolt, M16x50m | 2 |
G1-11-2 Coupling, Palm, Trailer Brakes, Single Line, Optional
| 45***00 | Coupling, Palm, Single Line | 1 |
| 45***01 | Kit-Repair | 1 |
| 45***02 | Cover, Dust | 1 |
G1-9-1 Brakes, Trailer, Air, Charge Circuit
| 13***2Z | Bolt, M6 X 50 | 2 |
| 13***9Z | Bolt, M8 X 90mm Long | 3 |
| 13***1Z | Nut, M8 | 2 |
G1-15-3 Valve, Trailer Brake
| 15***00 | Valve, Assembly, Trailer Brake | 1 |
G1-30-1 Brakes, Trailer, Hydraulic
| 13***3Z | Bolt, M8x130 Long | 2 |
| 15***00 | Adapter, 'T' | 1 |
| 23***10 | O Ring, 1/2"Bsp | 2 |
G1-17-1 Air Coupling, Duomatic
| 45***00 | Coupling, Trailer Brake, Duomatic | 1 |
| 45***01 | Kit-Repair, Duomatic Coupling | 1 |
G1-16-1 Valve, Inverse Relay
| 15***00 | Valve, Inverse Relay | 1 |
| 15***01 | Kit-Repair, Inverse Relay Valve | 1 |
S Suspension
S1-1-1 Suspension, Front
| 13***9Z | Screw, M12 X 35mm, Screw, M12 X 35mm; M12 X 35. Items 21 & 22 Are Used On 23***00 And 23***00 Throttle Brackets | 4 |
| 13***9Z | Bolt, M16 X 35mm | 2 |
| 13***8Z | Bolt, M10x80 | 4 |
S2-1-2 Suspension, Rear 2ws
| 13***1Z | Bolt, M12 X 45mm | 6 |
| 13***2Z | Bolt, M12 X 50mm | 8 |
| 13***4Z | Bolt, M16x60 | 4 |
S2-1-3 Suspension, Rear 2ws
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 8 |
S2-2-1 Suspension, Rear, 4ws
| 13***1Z | Bolt, M12 X 45mm | 3 |
| 13***2Z | Bolt, M12 X 50mm | 8 |
| 13***4Z | Bolt, M16x60 | 4 |
S2-1-1 Suspension, Rear 2ws
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***2Z | Bolt, M12 X 50mm | 8 |
| 13***4Z | Bolt, M16x60 | 4 |
S2-2-2 Suspension, Rear, 4ws
| 13***1Z | Bolt, M12 X 45mm | 2 |
| 13***5Z | Bolt, Star Drive, M8 X 65mm | 4 |
| 13***2Z | Bolt, M12 X 50mm | 8 |
S3-1-1 Suspension, Rear, Hydraulics, 2ws
| 13***5Z | Bolt | 1 |
| 13***1Z | Bolt, M8 X 45 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
S3-2-1 Suspension, Rear, Hydraulics, 4ws
| 13***5Z | Bolt | 1 |
| 13***7Z | Screw, Hexagon M8 X 25 | 2 |
| 13***1Z | Bolt, M8 X 45 | 1 |
T Engine 1006-6
T1-2-1 Engine, Short, Ya Build
| 02***60 | Engine, Short, 1006.6 | 1 |
T1-2-2 Engine, Short, Yb Build
| 02***64 | Engine, Short | 1 |
T1-7-1 Flywheel & Housing
| 02***61 | Dowel | 2 |
| 02***40 | Gear, Starter Ring | 1 |
| 02***82 | Seal, Felt | 1 |
T1-1-2 Engine, Complete, Yb Build
| 01***00 | Engine, Complete, 1006-6thr5, Turbocharged | 1 |
T1-6-2 Timing Case, Auxiliary Drive, Yb Build
| 02***82 | O Ring | 1 |
| 02***61 | Plate, Compressor Mounting | 1 |
| 02***62 | Hub | 1 |
T1-6-1 Timing Case, Camshaft & Gears, Ya & Yb Builds
| 02***38 | Key | 1 |
| 02***41 | Hub | 1 |
| 02***28 | Circlip | 1 |
T1-8-1 Engine Mountings
| 02***83 | Stud | 8 |
| 02***53 | Nut | 8 |
| 02***54 | Washer | 8 |
T1-3-2 Block Assembly, Yb Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-5-2 Fans, Pulleys, & Fan Belt, Optional, Ya Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-5-1 Fans, Pulleys, & Fan Belt, Ya Build
| 02***97 | Spacer, Fan, 50.8mm | 1 |
| 02***01 | Belt, Fan, Pair | 1 |
| 02***80 | Key | 1 |
T1-5-3 Fans, Pulleys, & Fan Belt, Yb Build
| 02***80 | Key | 1 |
| 02***08 | Ring, Assembly, Locking | 1 |
| 02***79 | Screw | 3 |
T1-1-1 Engine, Complete, Ya Build
| 01***00 | Engine, Complete, 1006-6, Naturally Aspirated | 1 |
T1-3-1 Block Assembly, Ya Build
| 02***01 | Thimble | 14 |
| 02***02 | Bolt | 14 |
| 02***07 | Plug, Core, D=50mm | 1 |
T1-4-2 Crankshaft, Bearings, Pistons & Con-Rods, Yb Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***29 | Circlip | 2 |
T1-4-1 Crankshaft, Bearings, Pistons & Con-Rods, Ya Build
| 02***38 | Key | 1 |
| 02***28 | Nut | 2 |
| 02***40 | Rod, Assembly, Connecting | 6 |
T2-2-1 Rocker Assembly, Push Rods & Tappets, Ya & Yb Build
| 02***28 | Spring, Long | 4 |
| 02***29 | Spring, Short | 2 |
| 02***32 | Screw | 12 |
T2-4-1 Lifting Plates, Engine
| 02***16 | Plate, Lifting | 1 |
| 02***17 | Plate, Lifting | 1 |
| 02***37 | Bolt | 1 |
T2-1-1 Cylinder Head, Ya Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-3-2 Rocker Cover, Ya & Yb Build
| 02***90 | Spring | 1 |
| 02***69 | Bush | 4 |
| 02***59 | Bracket | 1 |
T2-1-3 Cylinder Head, Ya Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T2-1-2 Cylinder Head, Yb Build
| 02***24 | Collet | 12 |
| 02***95 | Plug, Taper | 2 |
| 02***20 | Bolt, Cylinder Head | 12 |
T3-3-1 Filter, Air, Ya Build
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***0Z | Bolt, M8x40 | 1 |
| 13***3Z | Nut, Self Lock, M8 | 5 |
T3-3-2 Filter, Air, Yb Build
| 13***0Z | Bolt, M8x40 | 1 |
| 13***7Z | Bolt, M10x25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 1 |
T3-4-2 Exhaust System, Yb Build
| 02***19 | Gasket | 1 |
| 02***15 | Stud | 4 |
| 02***16 | Nut | 6 |
T3-1-2 Manifold, Induction, Yb Build
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
| 02***73 | Hose, Induction | 1 |
T3-5-1 Exhaust Brake, Installation
| 02***19 | Gasket | 1 |
| 13***5Z | Screw, M10 X 20mm Long; Use With Single Piece Casing. To Gearbox Number 445/143/831 Or 445/144/455, Screw, M10 X 20mm Long | 2 |
| 13***3Z | Bolt, M8 X 55 | 4 |
T3-1-1 Manifold, Induction, Ya Build
| 02***10 | Plug | 1 |
| 02***65 | Gasket | 2 |
| 02***66 | Gasket | 2 |
T3-2-1 Manifold, Exhaust, Ya Build
| 02***04 | Gasket | 2 |
| 02***43 | Manifold, Exhaust | 1 |
| 02***15 | Gasket | 1 |
T3-4-1 Exhaust System, Ya Build
| 02***03 | Stud | 3 |
| 02***61 | Nut | 3 |
| 13***3Z | Bolt, M10 X 16 | 4 |
T3-2-2 Manifold, Exhaust, Yb Build
| 02***04 | Gasket | 2 |
| 02***86 | Manifold, Exhaust | 1 |
| 02***15 | Gasket | 1 |
T3-5-2 Brake, Exhaust
| 47***01 | Brake, Assembly, Exhaust | 1 |
| 47***05 | Slide | 1 |
| 47***06 | Plate, Pressure | 1 |
T4-2-2 Thermostat, Housing, Inlet & Outlet, Yb Build
| 02***95 | Plug, Taper | 1 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-4-1 Radiator & Hoses
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
| 14***7Z | Washer, Plain, M8; Replaces Khn1550, San 12620 | 4 |
T4-2-1 Thermostat, Housing, Inlet & Outlet, Ya Build
| 02***95 | Plug, Taper | 1 |
| 02***92 | Thermostat | 2 |
| 02***45 | Gasket | 1 |
T4-4-2 Radiator & Hoses
| 13***7Z | Screw, Hexagon M8 X 25 | 4 |
| 13***3Z | Nut, Self Lock, M6 | 2 |
| 13***3Z | Nut, Self Lock, M8 | 2 |
T4-1-1 Pump, Water, Ya & Yb Builds
| 02***82 | O Ring | 1 |
| 02***86 | Gasket | 1 |
| 02***87 | O Ring | 1 |
T4-3-2 Radiator, Fittings & Mountings
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Screw, M8 X 16 | 16 |
| 13***4Z | Bolt, M10x60 | 2 |
T4-3-1 Radiator, Fittings & Mountings
| 13***5Z | Bolt, M5 X 20mm Long | 2 |
| 13***3Z | Screw, M8 X 16 | 16 |
| 13***4Z | Bolt, M10x60 | 2 |
T5-5-2 Cooler, Oil, & Pipework, Yb Build
| 02***17 | O Ring | 4 |
| 02***59 | Gasket | 1 |
| 02***72 | Gasket | 2 |
T5-1-1 Sump, Oil, & Fittings
| 02***05 | Insert | 2 |
| 02***82 | Plug, Oil Drain | 2 |
| 02***98 | O Ring | 1 |
T5-5-1 Cooler, Oil, & Pipework, Ya Build
| 02***17 | O Ring | 4 |
| 02***59 | Gasket | 1 |
| 02***67 | Gasket, Oil Cooler To Block | 1 |
T5-5-4 Cooler, Oil, & Pipework, Yb Build
| 02***14 | Seal, O Ring | 2 |
| 02***18 | Gasket, Oil Cooler Housing | 1 |
| 02***24 | Element, Oil Cooler, 7 Cell | 1 |
T5-4-1 Filter, Oil, Ya Build
| 02***73 | Element, Oil Filter, Canister Type - Long | 1 |
| 02***88 | Head, Oil Filter | 1 |
| 02***54 | Adapter | 1 |
T5-3-1 Piston Cooling Jets, Yb Build
| 02***98 | Valve | 6 |
| 02***97 | Retainer | 1 |
| 02***98 | Spring | 1 |
T5-2-2 Pump, Oil, & Relief Valve, Yb Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T5-4-2 Filter, Oil, Yb Build
| 02***84 | Element, Oil Filter, Canister Type-Short | 2 |
| 02***96 | Gasket | 1 |
| 02***03 | Head, Filter | 1 |
T5-2-1 Pump, Oil, & Relief Valve, Ya Build
| 02***69 | Gasket | 1 |
| 02***99 | Plunger | 1 |
| 02***70 | Gasket | 1 |
T6-3-2 Fuel Pipes, Injection Pump, Yb Build
| 02***88 | Plate | 4 |
| 02***48 | Elbow | 1 |
| 02***28 | Nut | 2 |
T6-8-2 Pump, Fuel Lift
| 02***91 | Gasket | 1 |
| 02***18 | Bolt | 4 |
| 17***02 | Filter, Screen | 1 |
T6-8-1 Pump, Fuel Lift
| 02***91 | Gasket | 1 |
| 02***18 | Bolt | 4 |
| 17***02 | Filter, Screen | 1 |
T6-5-2 Fuel Heater, & Fuel Feed Pipe, Yb Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
T6-2-1 Injectors, Fuel, & Injection Pipes, Ya Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 4 |
T6-1-2 Pump, Fuel Injection, Yb Build
| 02***00 | Seal | 2 |
| 02***01 | Wire | 1 |
| 02***83 | Sleeve | 1 |
T6-7-1 Filter, Fuel
| 02***91 | Bracket, F/Filter Mounting | 1 |
| 02***59 | Nut | 2 |
| 02***71 | Bolt | 2 |
T6-1-1 Pump, Fuel Injection, Ya Build
| 02***00 | Seal | 1 |
| 02***01 | Wire | 1 |
| 02***96 | Bracket | 1 |
T6-3-1 Fuel Pipes, Injection Pump, Ya Build
| 02***88 | Plate | 4 |
| 02***18 | Nut | 1 |
| 02***22 | Olive | 2 |
T6-2-2 Injectors, Fuel, & Injection Pipes, Yb Build
| 02***53 | Washer | 6 |
| 02***81 | Washer | 12 |
| 02***90 | Bolt | 5 |
T6-5-1 Fuel Heater, & Fuel Feed Pipe, Ya Build
| 02***18 | Nut | 1 |
| 02***22 | Olive | 1 |
| 02***72 | Nut | 1 |
T6-4-1 Fuel Pipes, Tank To Filter
| 02***18 | Nut | 2 |
| 02***22 | Olive | 2 |
| 02***52 | Banjo, 2-Way | 1 |
T6-6-1 Filter, Fuel Sediment
| 20***11 | Plug | 0 |
| 20***12 | Washer | 0 |
| 32***02 | Nut, Cap | 1 |
T7-2-5 Turbo, Heatshield, Yb Build
| 02***26 | Spacer | 4 |
| 02***77 | Shield, Heat | 1 |
| 02***16 | Nut | 2 |
T7-2-1 Turbo, Pipework, Yb Build
| 02***58 | Union | 1 |
| 02***87 | Olive | 1 |
| 02***06 | Nut | 1 |
T7-3-1 Compressor, Air
| 02***73 | Bracket, Compressor Support | 1 |
| 02***74 | Spacer | 1 |
| 02***04 | Screw | 1 |
T7-1-1 Turbocharger, Yb Build
| 02***12 | Kit-Repair, Turbocharger | 1 |
| 02***58 | Nut, Lock | 1 |
| 02***60 | Ring, Piston | 1 |
T7-5-2 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***0Z | Bolt, M10 X 40 | 1 |
| 13***2Z | Bolt, Bolt; Qty Was 1 Off Before New Plate. Old Fasteners Were 13***8z X 2 & 13***2z X 1 | 1 |
T7-6-1 Compressor 12.Volt, Air Conditioning
| 14***21 | Clutch, Assembly | 1 |
| 14***22 | Coil, Field | 1 |
| 14***23 | Bearing | 1 |
T7-5-1 Compressor, & Installation, Air Conditioning
| 13***9Z | Bolt, M10 X 35 | 3 |
| 13***3Z | Bolt, M10 X 130 | 1 |
| 13***3Z | Nut, Lock, M10 | 1 |
T7-4-1 Compressor Pipework
| 02***57 | Union | 2 |
| 02***98 | Spacer | 1 |
| 02***37 | Connector | 3 |
T8-1-2 Gasket Sets, Yb Build
| 02***83 | Kit-Gasket, Top | 1 |
| 02***84 | Kit-Gasket, Bottom | 1 |
| 02***77 | Gasket, Rocker Cover, Y Section, Black | 1 |
T8-1-1 Gasket Sets
| 02***83 | Kit-Gasket, Top | 1 |
| 02***77 | Gasket, Rocker Cover, Y Section, Black | 1 |
| 02***92 | Kit-Gasket, Bottom | 1 |
Frequently asked questions
What engine does the JCB 1115 use?
The JCB Fastrac 1115 uses a Perkins 1000-6 HR1 turbocharged diesel engine with a 6.0 L displacement, producing 115 hp at 2400 rpm.
What is the operating weight of the JCB 1115?
The JCB Fastrac 1115 weighs 11,686 lbs.
What model replaced the JCB 1115?
The JCB Fastrac 1115 was succeeded by the Fastrac 1115S series, which extended production to 1998.
What 1115 owners discuss
What engine powers the JCB Fastrac 1115 tractor?
The JCB Fastrac 1115 is powered by a Perkins 1000-6 HR1 turbocharged diesel engine. This is a 6.0 L (365.2 cu·in) six-cylinder, liquid-cooled unit with a bore of 100 mm (3.937 in) and a stroke of 127 mm (5.00 in). It produces 115 hp (85.8 kW) at 2400 rpm and 330.4 lb-ft (448.0 Nm) of torque at 1400 rpm. The 1115S variant produces 131.8 PS (96.9 kW; 130.0 HP) at 2300 rpm and 523.0 N·m (385.5 ft·lb) at 1400 rpm.
What are the known powertrain and transmission characteristics of the JCB Fastrac 1115?
The machine features a 36-speed synchromesh transmission with ceramic disc clutches, offering 36 forward and 12 reverse gears. It utilizes a 4x4 four-wheel drive chassis with hydrostatic power steering and pneumatic dry disc brakes. The transmission allows for optimal efficiency across varied field conditions; however, the higher RPM range may lead to increased fuel consumption during prolonged use.
What are the typical undercarriage and tire specifications for this model?
The JCB Fastrac 1115 is equipped with Ag front and rear tires sized the OEM part reference. The wide tire profile is designed to enhance weight distribution, reduce soil compaction, and improve maneuverability in field operations. The machine has a 4WD drive configuration.
What are the common engine quirks or failure patterns for JCB 444 series engines (relevant to this era)?
Early JCB 444 engines (Tier 2 and early Tier 3) are prone to big end bearing failures on the crankshaft, especially if oil change intervals are stretched. Fuel injection pump faults are also common on these earlier mechanical and early electronic engines. Later common rail engines tend to suffer from injector faults and general wear; the common rail systems are sensitive to fuel quality. Worn piston rings are a common cause of power loss and heavy breathing in high-hour engines.
What are common electrical or sensor issues reported for JCB machinery?
Starting problems are frequent, often caused by flat batteries, corroded terminals, or weak earth strap connections to the block. JCB 444 engines require strong crank speed (at least 12.4V for 12V systems or 24.8V for 24V systems) to fire. On earlier models, the forward/reverse lever operates microswitches that activate hydraulic solenoids; failure of these switches can cause intermittent movement. Sensor faults can also prevent the ECU from allowing the engine to run on later common rail models.
What hydraulic system issues are commonly discussed by operators?
Operators report issues with blowing hydraulic hoses, which may be due to regenerative spikes or poor crimping. On older models like the 3CMK2/MK3, the orbital steering valve is a common fault point and often leaks. Low hydraulic oil levels or clogged strainers can cause slow or non-functional hydraulics, particularly when the machine is on uneven ground. Air in the fuel lines can also cause the engine to fire briefly then die.
What should be checked when buying a used JCB Fastrac 1115?
Verify the engine serial number to confirm the Perkins 1000-6 HR1 variant. Check for signs of big end bearing knock (deep, rhythmic knocking under load) on early Tier 2/3 engines. Inspect the 36-speed transmission for smooth shifting and check the ceramic disc clutches for wear. Ensure the hydrostatic power steering and pneumatic dry disc brakes are functioning correctly. Look for leaks around the orbital steering valve and hydraulic hose crimps. Verify the condition of the OEM part reference tires and check for excessive oil consumption or white smoke from faulty injectors on common rail variants. Have your dealer verify engine compression and transmission gear engagement.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 1115 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.