Caterpillarexcavator
Caterpillar W345B II
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar W345B II is the wheeled variant of the 345B MH Series II material handler line, built on a six-wheel undercarriage rather than the tracked chassis used by its 345B MH Series II sibling. It runs the Cat 3176C ATAAC diesel (turbocharged, air-to-air aftercooled), rated at roughly 239 kW (321 hp) net at 2000 rpm, and carries an operating weight around 66,040 kg (145,590 lb) in its base MH configuration. Serial records place production under the ANJ prefix, part of the broader early-2000s 345B Series II generation. The machine mounts a dedicated two-piece MH front linkage rather than a digging boom and stick, and is factory-configured for scrap grapples (up to roughly 1.5 m3 / 2.0 yd3 class) or magnets (up to 1829 mm / 72 in diameter) rather than a bucket. It shares carrier-chassis lineage with the W330B and later W345C, and its tracked-chassis counterpart is the standard 345B MH Series II.
The W345B II sits in a Series II generation defined by the 3176C ATAAC engine and PEEC/ADEM II electronic control; its direct successor, the 345C MH, moved to the larger-displacement, lower-revving C13 engine for roughly 8% more power and better fuel economy at the same duty cycle. Because material handling is a continuous-rotation, near-full-flow duty cycle rather than the intermittent dig-swing-dump pattern of a standard excavator, wear concentrates in different places than on a bucket machine of the same platform - the slew ring/bearing, rotator seals, and axle hubs see the heaviest load. In the used and parts market, the W345B II remains a working scrap-yard and demolition asset valued for its wheeled mobility between piles and its parts commonality with the wider 345B Series II engine and hydraulic platform, even as buyers increasingly weigh it against the more fuel-efficient 345C MH when sourcing replacement units.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar W345B II specifications
Engine
| Engine model | Cat 3176C ATAAC diesel (turbocharged, air-to-air aftercooled), four-stroke-cycle |
| Gross power | 257 kW (345 hp) |
| Net (flywheel) power | 239 kW (321 hp) at 2000 rpm |
| Displacement | 10.3 L (628.6 cu in) |
| Bore x stroke | 125 mm x 140 mm (4.92 in x 5.51 in) |
| Cylinders | 6-cylinder inline, four-cycle diesel |
| Emissions tier | Not documented in available spec sheets for this generation (early-2000s pre-Tier / Tier 1-era release) |
Weights
| Operating weight (W345B II, wheeled, base MH configuration) | 66 040 kg (145,590 lb) |
| Ground pressure | Not applicable — wheeled undercarriage on tires, not tracks |
| Related tracked sibling (345B MH Series II, for reference only, not the wheeled W345B II) | Operating weight approximately 56 100 kg (123,420 lb); different undercarriage/drivetrain, do not apply to the wheeled W345B II |
| Transport weight | Not separately published; use operating weight above for transport planning |
Dimensions
| Operating height (top of cab) | 5 860 mm (19'3") |
| Operating width (outside of tires) | 4 580 mm (15'0") |
| Wheel base | 4 032 mm (13'3") |
| Tire size | 32 x 57 (in.) — approx. 1448 mm x 813 mm section |
| Cab riser height (raised-cab MH option) | 1.9 m (6'5"), shared across the MH front option, not confirmed wheel-specific |
| Ground clearance | Not separately published for the wheeled variant; tracked 345B MH Series II sibling lists 740 mm (29 in), not directly transferable |
| Tail swing radius | Not independently confirmed for the wheeled chassis |
| Transport length/track shoe width/undercarriage length | Not applicable/not published — wheeled machine, no track shoes; overall shipping length not found in available sources |
Performance
| Max horizontal reach (two-piece MH front, from swing center) | 16.5 to 16.7 m (54'0" to 54'8"), figure varies slightly by source |
| Max vertical pin height | 16.7 m (54'8") |
| Max dig depth / max cutting height | Not published — this is a material handler fitted with grapple/shear tools, not a digging bucket; dig-depth figures are not part of the standard spec sheet |
| Swing speed | 8.6 rpm (figure carried from the 345B MH Series II family; not confirmed wheel-specific) |
| Travel speed | 8.4 km/h (5.2 mph) |
| Gradeability | Not documented in available sources |
| Drawbar pull | Not published for the wheeled W345B II; the tracked 345B MH Series II sibling lists 322 kN (72,450 lbf) but uses a different (track) drivetrain, so it is not directly applicable |
Forces
| Bucket/grapple digging force | Not published — machine is typically sold configured with a scrap grapple (approx. 1.5 m3 / 2.0 yd3 class) rather than a digging bucket; no digging-force figure found |
| Stick/arm digging (crowd) force | Not documented in available sources |
Service capacities (summary)
| Fuel tank | 720 L (190 gal) — per 345B MH Series II engine/fuel-system documentation; not separately confirmed for the wheeled variant |
| Hydraulic system | 520 L (137 gal) — per 345B MH Series II documentation; wheeled-specific figure not separately published |
| Engine oil | 30 L (7.9 gal) |
| Cooling system | 45 L (12 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
W345B II fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (incl. filter) - Cat 3176C ATAAC diesel | 30 L (7.9 US gal) | Cat DEO diesel engine oil - SAE 15W-40 for temperate ambient ranges, stepping down to SAE 10W-30 or a cold-weather grade in sustained sub-freezing climates per Cat's ambient-temperature viscosity chart. |
| Cooling system | 45.5 L (12.0 US gal) | Cat diesel engine antifreeze/coolant - conventional Cat DEAC or extended-life Cat ELC (organic acid technology), mixed with water at a ratio sized for the expected minimum ambient (typically 1:1 for around -34 C / -29 F protection). |
| Fuel tank | 719 L (190 US gal) on the 345B Series II platform this carrier shares its engine/hydraulic literature with - not separately re-published for the wheeled W345B II, so treat as platform-typical and confirm against the machine's own OMM/plate. | Ultra-low-sulfur No. 2-D diesel fuel meeting Cat's fuel specification; use a winter-blend or treated fuel below freezing to prevent fuel waxing. |
| Hydraulic system - including tank | 518.7 L (137 US gal) total system; hydraulic tank alone 208.2 L (55 US gal) | Cat HYDO anti-wear hydraulic oil (Cat HYDO Advanced on later service fills), viscosity selected by ambient temperature band per Cat's climate chart - a lighter multigrade in cold climates, heavier single/multigrade in hot climates. |
| Final drive (each) - track-final-drive figure from the shared 345B Series II service literature | 15.1 L (4.0 US gal) per side on the tracked sibling; not applicable in the same form on the wheeled W345B II, which uses axle/differential hubs instead of track final drives - axle oil fill capacity is not documented in public sources for this model and varies by axle configuration. | Cat TDTO transmission/drive train oil (or Cat axle/differential-rated gear oil where axle hubs replace track final drives), graded by ambient per Cat's viscosity chart. |
| Swing drive (each) | 9.9 L (2.6 US gal) | Cat TDTO transmission/drive train oil, viscosity graded by ambient temperature; the swing mechanism sits on the same upperstructure Cat documents jointly for 345B, 345B Series II, and W345B Series II. |
| Pilot / other circuits | Not itemized separately in available refill-capacity tables - pilot oil is drawn from and returns to the main hydraulic tank, included in the hydraulic system total above. | Same Cat HYDO hydraulic oil as the main hydraulic system. |
| Grease (spec only) | No fixed refill volume - applied per grease point on the stated maintenance interval. | Cat Multipurpose grease (NLGI 2, lithium-complex EP), or Cat Advanced 3Moly Grease at moly-rated pin/bushing points, per Cat's standard grease-point specification for this excavator class. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar W345B II maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the W345B II beyond the schedule
Predictive Maintenance & Fluid Analysis
Track S·O·S trends on engine oil, hydraulic oil, swing drive, and axle hub samples rather than relying on hour-meter alone - continuous grapple/magnet rotation loads the rotate pump and slew bearing harder per hour than digging work does. Watch coolant level and color for early signs of injector copper-sleeve seal leakage into the cooling system, a known issue on the 3176C. Trend hydraulic oil temperature against rotation intensity, and flag boost-sensor or low-power fault codes before they strand the machine mid-cycle.
Corrective & Common Repairs
Most unpredictable fault codes and no-start complaints on this generation trace to moisture-corroded harness connectors or worn ground straps, not failed sensors - clean and ground-check before replacing parts. Turbo failures usually stem from oil starvation, not a bad turbo. In cold climates, a frozen boost-sensor hose low on the block can drop the engine into low-power mode until cleared. Rotator leak-down and sluggish rotation point to worn rotate motor seals from continuous-duty grapple or magnet spin cycling.
Overhaul & Rebuild Points
The slew ring/bearing is the highest-consequence wear point on this platform - a chipped or cracked gear tooth requires a full bearing assembly replacement, since the ring gear and bearing race are machined as one unit with no field-weld fix. Axle/differential hubs replace track final drives on this wheeled variant and should be scheduled for oil change and wear-metal sampling on the same cadence. Budget for rotate-pump and rotator-seal overhaul earlier than on a digging machine given the duty cycle.
Seasonal & Environment Servicing
Scrap and mill-yard surfaces accelerate tire wear and embed metal debris in stabilizer feet, so keep the working surface pushed clear where possible and inspect tires each shift. In cold climates, verify the boost-pressure sensor hose routing to avoid the known low-hose water-trap freeze point, and step down engine oil and coolant mix ratios per Caterpillar's ambient-temperature chart. Hot, dusty scrap environments call for more frequent radiator and hydraulic-cooler core cleaning to prevent the hydraulic-oil-temperature-too-high fault.
W345B II common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 106-3969 | Filter Element As-Air | Air intake service | Check fitment → |
| 106-3973 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
W345B II fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure too low for current engine speed | Low oil level, plugged oil filter, worn oil pump, or a failed oil pressure sensor/sender | Stop engine, check oil level and filter condition, verify actual pressure with a mechanical gauge before returning to service |
| 110-00 | Engine coolant temperature too high | Low coolant level, blocked radiator core/fins, weak or stuck thermostat, slipping or failed fan drive | Shut down and let engine cool, check coolant level and radiator for debris, verify fan operation and thermostat before restart |
| 600-00 | Hydraulic oil temperature too high | Low hydraulic oil level, dirty/blocked hydraulic oil cooler, degraded oil, or a failing hydraulic oil temperature sensor | Idle down and check hydraulic oil level and cooler cleanliness, inspect oil condition, confirm sensor reading against a manual check |
| 168-02 | System (battery) voltage erratic, intermittent, or incorrect | Loose or corroded battery terminals/ground straps, failing alternator, or a chafed harness connector at the ECM | Check battery terminals and ground connections, test charging system output, inspect main harness connectors for corrosion |
| 190-02 | Engine speed/timing signal erratic, intermittent, or incorrect | Damaged or misadjusted speed/timing sensor, metal debris on the sensor tip, or a damaged sensor harness | Inspect and reset sensor air gap, clean debris from sensor tip, check harness continuity, recalibrate with Cat ET if required |
| 91-08 | Throttle position signal abnormal (frequency, pulse width, or period out of range) | Faulty throttle position sensor, sticking linkage, or a damaged sensor circuit | Inspect throttle linkage for binding, check sensor wiring, recalibrate throttle position sensor with Cat ET |
| 102-03 | Boost pressure sensor signal voltage above normal (open circuit) | Disconnected or corroded boost pressure sensor connector, chafed harness wire, or failed sensor | Inspect sensor connector and wiring for an open circuit, reseat or repair connections, replace sensor if fault persists |
| 105-00 | Inlet (intake) manifold air temperature too high | Restricted or leaking aftercooler/ATAAC circuit, blocked charge air cooler fins, or high ambient intake conditions | Check aftercooler core and hoses for restriction or leaks, clean cooler fins, verify sensor reading before returning to work |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
W345B II attachments & work tools
Buckets
The W345B II MH two-piece front is built for grapples and magnets, not digging buckets, so no factory GP/HD bucket lineup is published for this front the way it is for the standalone 345B excavator. If a scrap or clamshell bucket is fitted, its size follows the grapple envelope (around the 1.5 m3 / 2.0 yd3 class) rather than a dedicated bucket range.
Hydraulic hammers
No breaker class is published for this configuration. The two-piece MH front and its dedicated grapple open/close plus rotate circuits are set up for grapples and magnets; hammer fitment is not documented for this exact serial range, so verify circuit pressure and mounting with your dealer before adapting a breaker.
Quick couplers
The W345B II MH front uses a dedicated two-piece linkage with a pin-mounted tool interface for grapples and magnets rather than a universal excavator quick coupler. No Cat coupler model is documented for this front; tool changes on this class of machine are typically pin-on.
Thumbs/grapples
The two-piece front is matched to a 1.5 m3 (2.0 yd3) class scrap grapple. A separate 38 L/min (10 gpm) gear pump feeds the rotate circuit through a fully adjustable control valve, letting the setup be tuned to different grapple manufacturers' flow needs. The grapple open/close circuit shares the main implement hydraulics for smooth simultaneous multi-function control. No dedicated excavator-style thumb is documented; the grapple performs that role on this machine.
Magnets
The machine can power magnets up to 1829 mm (72 in) in diameter, supported by a factory electronic magnet controller and dedicated generator. An in-cab rotary selector switch lets the operator tune magnet performance for different grades of scrap.
Rippers
No ripper attachment is documented for this machine. As a scrap/material-handling configuration on a two-piece MH front, it is not set up for ground-engaging ripper work; this tool class does not apply to this configuration.
Hydraulic-kit notes
Attachment hydraulics are split into two circuits: the grapple open/close function integrates with the main implement circuit for simultaneous multi-function control, while rotation runs off its own 38 L/min (10 gpm) gear pump with an adjustable control valve so flow can be matched to the grapple brand fitted. No separate high-flow auxiliary circuit beyond this MH-dedicated setup is documented. Confirm the base engine before ordering tools: this Series II wheeled MH uses the Cat 3176C ATAAC diesel (approx. 239 kW flywheel power), not the C13 fitted to the later 345C MH, so tool hydraulic-flow matching should reference the 3176C-powered spec sheet.
All W345B II assemblies by section
Every catalogued assembly group for the Caterpillar W345B II. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
124-1699 Air Cleaner Gp
| 10***88 | Cover As | 1 |
| 10***69 | Filter Element As-Air; (Primary) | 1 |
| 10***73 | Filter Element As-Air; (Secondary) | 1 |
127-3288 Elbow Gp-Air Inlet
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 10***03 | Elbow; (Air Inlet) | 1 |
| 12***88 | Elbow Group-Air Inlet | 1 |
131-8849 Extension Gp-Exhaust
| 13***49 | Extension Group-Exhaust; (Exhaust) | 1 |
| 25***91 | Pipe As-Exhaust | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 4 |
155-6579 Lines Gp-Air
| 13***49 | Plate | 2 |
| 14***42 | U-Bolt | 2 |
| 15***66 | Pipe | 1 |
124-1682 Lines Gp-Air
| 12***82 | Lines Group-Air; -Air Cleaner To Turbocharger | 1 |
| 13***61 | Hose | 1 |
| 13***62 | Hose | 1 |
126-0081 Lines Gp-Air -Turbocharger Outlet
| 12***81 | Lines Group-Air; -Turbocharger Outlet | 1 |
| 12***29 | Clamp; (V-Band) | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
124-1685 Lines Gp-Muffler Drain
| 09***41 | Clamp, Hose; (Hose) | 1 |
| 12***85 | Lines Group-Muffler Drain | 1 |
| 23***70 | Tube As | 1 |
117-2688 Manifold Gp-Exhaust
| 10***13 | Gasket | 6 |
| 11***89 | Manifold-Exhaust; (Center) | 1 |
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
116-5405 Manifold Gp-Inlet
| 11***05 | Manifold Group-Inlet | 1 |
| 11***06 | Manifold; (Inlet) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
124-1683 Mounting Gp-Air Cleaner
| 12***83 | Mounting Group-Air Cleaner; (Air Cleaner) | 1 |
| 12***99 | Air Cleaner Group | 1 |
| 13***20 | Adapter As | 1 |
162-6300 Muffler Gp
| 13***34 | Bracket As | 1 |
| 13***42 | Bracket As | 1 |
| 13***47 | U-Bolt | 2 |
150-1714 Precleaner Gp -Air Cleaner
| 15***14 | Precleaner Group; -Air Cleaner | 1 |
| 2S***93 | Precleaner Cover Assembly | 1 |
| 2S***08 | Collector-Dust; (Air Precleaner) | 1 |
169-4271 Turbocharger Gp
| 12***51 | Housing-Turbine | 1 |
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***28 | Cartridge Group; (Turbocharger) | 1 |
169-4675 Turbocharger Gp
| 16***71 | Turbocharger Group | 1 |
| 16***75 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
196-2776 Turbocharger Gp
| 12***51 | Housing-Turbine | 1 |
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***30 | Cover; (Compressor) | 1 |
Basic Engine
115-9382 Camshaft Gp
| 11***82 | Camshaft Group | 1 |
| 11***59 | Cover | 1 |
| 12***11 | Journal | 1 |
132-3215 Cover Gp-Air Compressor
| 11***18 | Cover | 1 |
| 11***19 | Gasket | 1 |
| 13***15 | Cover Group-Air Compressor; (Air Compressor) | 1 |
115-2985 Cover Gp-Cylinder Block
| 11***85 | Cover Group-Cylinder Block | 1 |
| 4P***87 | Cover | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
127-5728 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 12***28 | Cover Group-Flywheel Housing; (Flywheel Housing) | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
136-4307 Cover Gp-Front Housing
| 13***07 | Cover Group-Front Housing; -Hydraulic Pump Drive | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 4P***50 | Cover | 1 |
117-2743 Crankshaft Gp
| 11***43 | Crankshaft Group | 1 |
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
200-2054 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***54 | Cylinder Block As | 1 |
204-3450 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***25 | Liner-Cylinder Block | 6 |
| 16***63 | Shim-Liner; -Cylinder | 0 |
148-2062 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***16 | Bearing; (Sleeve) | 5 |
| 12***17 | Bearing-Sleeve; (Narrow) | 1 |
148-2095 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***62 | Cylinder Block As | 1 |
| 14***95 | Cylinder Block As | 1 |
115-2982 Cylinder Block Gp
| 11***82 | Cylinder Block Group | 1 |
| 14***95 | Cylinder Block As | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
148-2150 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
179-9462 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
179-9459 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
| 14***52 | Insert-Valve Seat; (0.508-mm Os Od)(0.508-mm Os Od) | 12 |
148-2149 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
116-1085 Cylinder Head Gp
| 11***85 | Cylinder Head Group | 1 |
| 14***49 | Cylinder Head Group | 1 |
| 18***07 | Gasket As-Cylinder Head | 1 |
117-2766 Damper Gp
| 11***66 | Damper Group | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
137-3750 Drive Gp-Fan
| 09***24 | Ring; (Retaining) | 1 |
| 13***46 | Shaft | 1 |
| 13***49 | Spacer; (45x53x10-mm Thk) | 2 |
116-1083 Fastener Gp-Cylinder Head
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 12***84 | Bolt; (Hex Head) (M16x2x160mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 6 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
163-0045 Flywheel Gp
| 16***43 | Flywheel As | 1 |
| 16***45 | Flywheel Group | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 0 |
116-5386 Flywheel Gp
| 11***86 | Flywheel Group | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***61 | Flywheel As | 1 |
117-2750 Gear Gp-Front
| 11***50 | Gear Group-Front | 1 |
| 13***83 | Shaft | 1 |
| 13***86 | Gear As; (Idler) (71 Teeth) | 1 |
138-1989 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***89 | Housing Group-Flywheel; (Flywheel) | 1 |
115-3006 Housing Gp-Front
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***24 | Gear; (Pump Drive) (34 Teeth) | 1 |
| 13***96 | Housing As; (Front) | 1 |
148-2063 Lifter Gp-Valve -Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 14***63 | Lifter Group-Valve; -Mechanism | 1 |
117-2748 Lifting Gp-Engine
| 11***05 | Plate; (Lifting Eye) | 2 |
| 11***48 | Lifting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
162-6283 Mounting Gp-Engine
| 10***37 | Washer; (24.5x135x12-mm Thk) | 4 |
| 13***36 | Mount-Flexible | 2 |
| 13***37 | Mount-Flexible | 2 |
138-2550 Mounting Gp-Fan Drive
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 13***50 | Mounting Group-Fan Drive; (Short) | 1 |
| 5R***37 | Washer; (Seal) (1.27mm Thk) | 2 |
116-5408 Mounting Gp-Valve Mechanism
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 11***08 | Mounting Group-Valve Mechanism | 1 |
| 17***68 | Bridge As-Valve; (Intake) | 12 |
131-6678 Pan Gp-Oil
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***08 | Gasket; (Oil Pan) | 1 |
132-3203 Piston & Rod Gp
| 10***19 | Ring; (Piston) (Intermediate) | 1 |
| 12***90 | Bearing; (Connecting Rod) (.51mm U.S.) | 0 |
| 12***91 | Bearing; (Connecting Rod) (.76mm U.S.) | 0 |
117-0165 Plug Gp-Cylinder Block
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
138-2028 Plug Gp-Cylinder Block
| 13***28 | Plug Group-Cylinder Block | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
115-2984 Plug Gp-Cylinder Block
| 11***84 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 3 |
117-0185 Plug Gp-Cylinder Block
| 11***85 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
| 9S***06 | Plug (Front 5 Stem Main Control Valve) | 1 |
116-5452 Plug Gp-Front Housing
| 11***52 | Plug Group-Front Housing; (Front Housing) | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
117-2795 Pulley Gp-Crankshaft
| 11***95 | Pulley Group-Crankshaft; (Crankshaft) | 1 |
| 13***56 | Pulley; (8-Groove) | 1 |
141-6158 Pulley Gp-Ref Compressor & Alt
| 13***23 | Pulley As; (Idler) | 2 |
| 14***58 | Pulley Group-Ref Compressor & Alt; (Ref Compressor & Alt) | 1 |
| 14***88 | Bracket; (Mounting) | 1 |
115-9397 Rocker Arm Gp
| 09***14 | Pin; (Spring) | 1 |
| 11***97 | Rocker Arm Group | 1 |
| 11***98 | Arm; (Valve Rocker) (Exhaust) | 2 |
116-1091 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 16***23 | Cover | 1 |
132-3240 Support Gp-Engine
| 13***40 | Support Group-Engine; (Engine) | 1 |
| 13***41 | Support As; (Front) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
117-2749 Valve Mechanism Gp -Engine
| 10***42 | Base-Valve Mechanism Cover | 1 |
| 10***67 | Pushrod; (Valve) | 12 |
| 10***68 | Pushrod-Injector | 6 |
Cooling System
115-2990 Cooler Gp-Engine Oil
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
149-7703 Core As-Radiator
| 14***47 | Core & Header As | 1 |
| 14***71 | Gasket | 2 |
| 14***03 | Core As-Radiator; (Radiator) | 1 |
117-2792 Fastener Gp-Oil Cooler -Engine
| 11***92 | Fastener Group-Oil Cooler; -Engine | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 1 |
| 9M***74 | Washer-Hard; (8.8x16x2-mm Thk)(Hard) | 1 |
175-1415 Housing & Regulator Gp
| 11***00 | Housing As-Regulator | 1 |
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 4 |
| 17***15 | Housing & Regulator Group | 1 |
236-5497 Housing & Regulator Gp -Water/Coolant
| 11***00 | Housing As-Regulator | 1 |
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 4 |
| 23***65 | Manifold | 1 |
154-9536 Lines Gp-Oil Cooler
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 4 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 12 |
| 15***63 | Hose As | 1 |
236-5496 Lines Gp-Water
| 11***97 | Gasket | 4 |
| 23***96 | Lines Group-Water | 1 |
| 23***97 | Housing & Regulator Group; -Water/Coolant | 1 |
117-2778 Lines Gp-Water -Water Pump Inlet Elbow
| 10***35 | Gasket | 1 |
| 10***85 | Elbow; (Water Pump) | 1 |
| 11***78 | Lines Group-Water; -Water Pump Inlet Elbow | 1 |
116-5460 Lines Gp-Water -Bypass
| 10***08 | Flange | 1 |
| 10***95 | Tube | 1 |
| 11***60 | Lines Group-Water; -Bypass | 1 |
175-2564 Lines Gp-Water
| 11***97 | Gasket | 4 |
| 17***15 | Housing & Regulator Group | 1 |
| 17***64 | Lines Group-Water; (Water) | 1 |
117-2789 Plug Gp-Water Lines
| 11***89 | Plug Group-Water Lines; -Engine Oil Cooler | 1 |
| 6V***27 | Seal-O-Ring (Id=8.92mm) | 1 |
| 8T***67 | Plug-Pipe; (Oil Cooler Bonnet Drain) | 1 |
117-2674 Pump Gp-Water
| 11***74 | Pump Group-Water | 1 |
| 17***00 | Pump Group-Water | 1 |
| 6V***21 | Bolt; (M8x1.25x80-mm) | 2 |
176-7000 Pump Gp-Water
| 10***10 | Gasket | 1 |
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***95 | Cover-Pump | 1 |
153-8053 Pump Gp-Water
| 10***09 | Impeller; (Pump) | 1 |
| 10***10 | Gasket | 1 |
| 10***12 | Shaft; (Water Pump) | 1 |
178-0545 Radiator & Fan Gp
| 09***61 | Strap; (Cable) | 2 |
| 10***05 | Cap As; (Hose Nipple) | 1 |
| 10***06 | Cap; (Fill) | 1 |
305-2325 Radiator Gp
| 09***01 | Cap-Radiator | 1 |
| 14***47 | Core & Header As | 1 |
| 14***71 | Gasket | 2 |
178-0546 Radiator Gp
| 09***01 | Cap-Radiator | 1 |
| 14***03 | Core As-Radiator; (Radiator) | 1 |
| 14***06 | Frame As | 1 |
Electrical And Starting System
128-8915 Alarm Gp-Travel -Back Up
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***15 | Alarm Group-Travel; -Back Up | 1 |
| 12***16 | Decal; Plate, Decal, Bracket As | 1 |
141-6157 Alternator Gp-Charging
| 14***41 | Bracket As; (Alternator) | 1 |
| 14***57 | Alternator Group-Charging; (Charging) | 1 |
| 14***01 | Bracket; (Alternator), Spring | 1 |
3e-7577 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***56 | Diode As; (Alternator) | 1 |
177-9953 Alternator Gp-Charging
| 17***53 | Alternator Group-Charging; (24-Volt, 80-Ampere) | 1 |
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
176-8359 Battery & Wiring Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
125-4856 Battery & Wiring Gp
| 11***37 | Clip | 5 |
| 11***80 | Cable As; (Jumper) | 1 |
| 11***42 | Cable As | 1 |
124-2674 Connection Gp-Electrical
| 12***74 | Connection Group-Electrical; -Ground | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
124-2673 Control & Mtg Gp-Engine Elek
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***73 | Control & Mtg Group-Engine Elek; (Engine Elek) | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
191-6919 Control & Mtg Gp-Machine
| 10***91 | Bracket Assem. | 1 |
| 19***19 | Control & Mtg Group-Machine | 1 |
| 21***46 | Control Group-Machine; (Engine, Hydraulic) | 1 |
164-8254 Control & Mtg Gp-Machine
| 10***91 | Bracket Assem. | 1 |
| 16***54 | Control & Mtg Group-Machine; (Engine, Hydraulic) | 1 |
| 17***44 | Control Group-Machine; (Engine, Hydraulic) | 1 |
160-3576 Control Gp-Hydraulic Generator
| 00***92 | Screw-Washer Head; (1/4-20x0.5-In) | 2 |
| 09***41 | Screw; (Machine) (M6x1thd) | 2 |
| 09***21 | Rail-Mounting; (60-cm) | 0 |
115-3055 Control Gp-Engine Electronic
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
150-7979 Generator Ar-Hydraulic
| 13***69 | Connector | 2 |
| 13***70 | Connector | 2 |
| 13***72 | Cable | 1 |
243-0663 Generator Ar-Hydraulic
| 13***69 | Connector | 2 |
| 13***70 | Connector | 2 |
| 14***54 | Mounting Group-Generator Display | 1 |
191-5516 Generator Ar-Hydraulic
| 13***69 | Connector | 2 |
| 13***70 | Connector | 2 |
| 14***54 | Mounting Group-Generator Display | 1 |
161-1186 Generator Gp-Hydraulic
| 06***88 | Locknut; (1-11-1/2-Thd) | 2 |
| 06***08 | Locknut; (1-11-1/4-Thd) | 1 |
| 10***48 | Bushing | 1 |
150-7978 Generator Gp-Hydraulic
| 15***78 | Generator Group-Hydraulic | 1 |
| 19***28 | Brush | 4 |
| 19***34 | Holder-Brush | 2 |
187-3641 Generator Gp-Hydraulic
| 06***88 | Locknut; (1-11-1/2-Thd) | 2 |
| 06***08 | Locknut; (1-11-1/4-Thd) | 3 |
| 10***48 | Bushing | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
126-7487 Lamp Gp-Flood
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
5i-8250 Lamp Gp-Flood
| 10***01 | Lens Assem. | 1 |
| 10***02 | Band | 1 |
| 10***03 | Ring (Rubber) | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
150-5480 Lighting Gp-Boom
| 11***18 | Clip | 1 |
| 12***48 | Harness As; (Boom Floodlight) | 1 |
| 15***80 | Lighting Group-Boom; (Boom) | 1 |
4i-5409 Lighting Gp-Chassis -Front, Rh
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 4I***09 | Lighting Group-Chassis; -Front, Rh | 1 |
130-3869 Lighting Gp-Flood
| 12***44 | Harness As-Lighting | 2 |
| 13***69 | Lighting Group-Flood | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 6 |
145-8354 Mounting Gp-Generator Display
| 09***61 | Strap; (Cable) | 4 |
| 14***53 | Bracket As | 1 |
| 14***54 | Harness As; (Monitor) (Generator) | 1 |
176-8360 Panel Gp-Circuit Breaker
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
166-8058 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 13***89 | Cover | 1 |
| 13***22 | Clip | 2 |
205-6343 Control Gp-Hydraulic Generator
| 00***92 | Screw-Washer Head; (1/4-20x0.5-In) | 2 |
| 01***15 | Screw-Self-Tapping | 2 |
| 09***41 | Screw; (Machine) (M6x1thd) | 2 |
161-9927 Sensor Gp-Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 16***27 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
161-9930 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***30 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
265-9033 Sensor Gp-Speed
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
171-9127 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***84 | Switch As-Rocker; (Starting Aid Ether) | 1 |
| 11***36 | Clip | 1 |
6v-0890 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
105-4729 Starting Motor Gp-Electric
| 10***28 | Wire As | 1 |
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 4N***59 | Gasket; (Starting Motor) | 1 |
237-1962 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
197-0986 Starting Motor Gp-Electric
| 17***43 | Bolt-12 Point Head; (5/8-11x1.75-In) | 3 |
| 19***86 | Starting Motor Group-Electric; (Electric) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
207-1556 Starting Motor Gp-Electric
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***19 | Switch Group-Disconnect; -Battery | 1 |
234-4678 Switch Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***93 | Switch As-Pressure; (Engine Coolant) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
234-1899 Wiring Gp-Cab
| 03***95 | Clip | 3 |
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
134-3868 Wiring Gp-Cab -With Upper Wiper
| 03***95 | Clip | 3 |
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
152-3775 Wiring Gp-Cab Riser
| 15***75 | Wiring Group-Cab Riser; (Cab Riser) | 1 |
| 15***76 | Harness As-Cab | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
234-1987 Wiring Gp-Console
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
125-4854 Wiring Gp-Console
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
234-3123 Wiring Gp-Console
| 15***49 | Wiring Group-Console; (Console) (Rh) | 1 |
| 23***87 | Wiring Group-Console | 1 |
| 23***23 | Wiring Group-Console | 1 |
154-8249 Wiring Gp-Console
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
175-2124 Wiring Gp-Console
| 12***54 | Wiring Group-Console; (Console) (Lh) | 1 |
| 15***49 | Wiring Group-Console; (Console) (Rh) | 1 |
| 17***24 | Wiring Group-Console; (Console) | 1 |
174-6824 Wiring Gp-Electronic Control
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 6 |
152-3777 Wiring Gp-Material Handler
| 11***36 | Clip | 4 |
| 11***18 | Clip | 1 |
| 14***44 | Harness As-Operator Controls | 1 |
117-2760 Wiring Gp-Unit Injector
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 0 |
| 11***60 | Wiring Group-Unit Injector | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
Engine Arrangement
197-3587 Conversion Gp
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
173-0351 Engine Ar
| 16***00 | Muffler Group | 1 |
| 17***51 | Engine Ar | 1 |
| 17***55 | Engine Ar-Complete; (Complete) | 1 |
163-5639 Engine Ar-Core
| 11***82 | Cylinder Block Group | 1 |
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***82 | Camshaft Group | 1 |
173-0355 Engine Ar-Complete
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 11***84 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 11***85 | Cover Group-Cylinder Block | 1 |
175-2116 Installation Ar-Engine
| 12***82 | Lines Group-Air; -Air Cleaner To Turbocharger | 1 |
| 12***83 | Mounting Group-Air Cleaner; (Air Cleaner) | 1 |
| 12***85 | Lines Group-Muffler Drain | 1 |
Frame And Body
178-3605 Box & Mtg Gp-Storage
| 12***26 | Spacer; (13x25x25-mm Thk) | 4 |
| 16***84 | Bolt; (M12x1.75x60-mm)(M12x1.75 Thd) | 4 |
| 17***05 | Box & Mtg Group-Storage; (Storage) | 1 |
177-2379 Box Gp-Storage
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 11***23 | Seal; (22dm) | 1 |
177-0708 Box Gp-Storage
| 16***88 | Tank Group-Fuel; (Fuel) | 1 |
| 17***08 | Box Group-Storage | 1 |
| 17***06 | Box Group-Storage; (Storage) | 1 |
178-3606 Box Gp-Storage
| 12***26 | Spacer; (13x25x25-mm Thk) | 4 |
| 12***05 | Seal | 1 |
| 16***97 | Tool Box & Spacer As | 1 |
133-4410 Counterweight Gp
| 08***79 | Bearing; (Sleeve) | 2 |
| 12***67 | Support | 2 |
| 12***78 | Bolt; (M36x4x603-mm) | 6 |
127-7951 Cover As-Sound Suppression
| 12***51 | Cover As-Sound Suppression | 1 |
| 13***26 | Liner | 1 |
| 13***27 | Liner | 1 |
133-4430 Cover Gp-Hood
| 12***14 | Sheet As | 1 |
| 13***51 | Sheet | 1 |
| 13***30 | Cover Group-Hood; (Hood) | 1 |
133-4543 Cover Gp-Hood
| 09***34 | Hinge | 2 |
| 12***88 | Insulation | 1 |
| 12***91 | Insulation | 1 |
141-6493 Door Gp-Access
| 12***08 | Liner | 1 |
| 14***93 | Door Group-Access; -Battery Compartment | 1 |
| 14***94 | Door As-Access | 1 |
140-1573 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 12***98 | Liner | 1 |
| 14***73 | Door Group-Access; -Pump Compartment | 1 |
147-6950 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 11***27 | Hinge | 2 |
| 12***01 | Rubber | 1 |
146-4966 Fender & Cover Gp
| 11***02 | Cover | 1 |
| 11***24 | Washer | 2 |
| 14***66 | Fender & Cover Group | 1 |
175-2121 Frame Gp-Upper
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***08 | Shim; (2-mm Thk) | 1 |
| 10***83 | Handle - Grab | 2 |
169-5536 Gear & Bearing Gp-Swing
| 09***20 | Spacer; (25x44x6-mm Thk) | 54 |
| 09***43 | Retainer | 1 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
169-5537 Gear & Bearing Gp-Swing
| 16***37 | Gear & Bearing Group-Swing; (Swing) | 1 |
| 16***38 | Gear & Bearing Group-Swing | 1 |
| 16***41 | Gear & Bearing Group-Swing | 1 |
227-6095 Gear & Bearing Gp-Swing
| 22***75 | Seal-Dust | 2 |
| 22***95 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
227-6094 Gear & Bearing Gp-Swing
| 16***41 | Gear & Bearing Group-Swing | 1 |
| 22***94 | Gear & Bearing Group-Swing | 1 |
| 22***95 | Gear & Bearing Group-Swing | 1 |
169-5541 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 16***41 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
169-5538 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 16***38 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
168-1698 Guard Gp-Bottom
| 12***50 | Plate As | 1 |
| 12***52 | Plate As | 1 |
| 12***54 | Plate As | 2 |
195-7952 Guard Gp-Final Drive
| 19***25 | Bumper As | 1 |
| 19***52 | Guard Group-Final Drive | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 12 |
134-8887 Guard Gp-Swivel
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 13***88 | Plate As | 1 |
| 13***91 | Plate As | 1 |
122-3877 Handle Gp-Storage Door
| 09***72 | Setscrew; (Socket) | 2 |
| 12***77 | Handle Group-Storage Door | 1 |
| 12***78 | Bracket | 1 |
180-8652 Handrail Gp
| 13***92 | Sleeve Assem. | 1 |
| 13***94 | Bolt; (M12x1.75x53-mm)(M12x1.75'Thd) | 2 |
| 15***47 | Bracket As | 1 |
206-3104 Handrail Gp
| 14***17 | Handrail As | 1 |
| 14***57 | Shim; (5.0mm Thk) | 2 |
| 15***41 | Handrail As | 1 |
175-2125 Handrail Gp
| 14***17 | Handrail As | 1 |
| 14***57 | Shim; (5.0mm Thk) | 2 |
| 15***41 | Handrail As | 1 |
175-2119 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 4 |
| 08***09 | Shim (2.0mm Thick) | 4 |
| 09***19 | Pin, Clevis; (Clevis) | 4 |
155-0558 Hood As-Engine
| 09***34 | Hinge | 2 |
| 13***23 | Door As | 1 |
| 15***58 | Hood As-Engine | 1 |
133-4585 Hood As-Engine
| 12***98 | Insulation | 2 |
| 13***85 | Hood As-Engine; (Engine) | 1 |
| 14***17 | Insulation | 1 |
178-4333 Seal Gp-Chassis
| 13***88 | Liner | 1 |
| 17***25 | Liner As | 1 |
| 17***35 | Liner As | 1 |
140-1559 Sheet As-Sound Suppression
| 12***62 | Liner | 1 |
| 14***59 | Sheet As-Sound Suppression | 1 |
| 14***62 | Liner | 1 |
159-3030 Sheet As-Sound Suppression
| 12***60 | Liner | 1 |
| 13***02 | Liner | 1 |
| 15***30 | Sheet As-Sound Suppression | 1 |
159-3028 Sheet As-Sound Suppression
| 12***60 | Liner | 1 |
| 13***08 | Liner | 1 |
| 15***28 | Sheet As-Sound Suppression | 1 |
214-8131 Sheet As-Sound Suppression
| 13***32 | Insulation | 1 |
| 13***59 | Liner | 1 |
| 21***31 | Sheet As-Sound Suppression | 1 |
146-4971 Sheet As-Sound Suppression
| 13***69 | Insulation | 1 |
| 13***70 | Insulation | 1 |
| 13***71 | Insulation | 1 |
214-8135 Sheet As-Sound Suppression
| 21***35 | Sheet As-Sound Suppression | 1 |
| 21***38 | Sheet-Rubber | 1 |
| 21***67 | Insulation | 1 |
214-8128 Sheet As-Sound Suppression
| 21***28 | Sheet As-Sound Suppression | 1 |
| 21***30 | Sheet-Rubber | 1 |
| 21***64 | Insulation | 1 |
158-0520 Sheet As-Sound Suppression
| 12***82 | Insulation | 1 |
| 15***20 | Sheet As-Sound Suppression | 1 |
| 22***44 | Sheet-Rubber | 1 |
160-0996 Sheet As-Sound Suppression
| 12***79 | Insulation | 1 |
| 16***96 | Sheet As-Sound Suppression | 1 |
| 5P***71 | Seal 1.09 M(43.26 In.); (3.06m(120.4in)Lg) | 0 |
176-0847 Walkway Gp
| 17***47 | Walkway Group | 1 |
| 17***75 | Spacer | 24 |
| 17***77 | Walkway As | 2 |
195-7947 Walkway Gp
| 19***47 | Walkway Group | 1 |
| 19***48 | Walkway Group | 4 |
| 19***49 | Walkway Group | 2 |
195-7948 Walkway Gp
| 19***48 | Walkway Group | 1 |
| 19***93 | Walkway As | 1 |
| 19***95 | Bracket As | 1 |
Fuel System
116-5436 Filter Gp-Fuel
| 11***36 | Filter Group-Fuel; -Secondary | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
117-0184 Fitting Gp-Fuel Lines
| 11***84 | Fitting Group-Fuel Return; (Return)(Return) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 7X***02 | Connector; (Fuel Pump Inlet) | 1 |
117-0183 Fitting Gp-Fuel Lines
| 11***83 | Fitting Group-Fuel Supply; (Supply)(Supply) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9X***50 | Connector-O-Ring; (O-Ring Port) | 1 |
223-3095 Gauge Gp-Sight -Fuel Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***95 | Gauge Group-Sight; -Fuel Level | 1 |
| 23***58 | Block | 2 |
212-3463 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 21***63 | Injector Group-Fuel | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
203-7685 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 20***85 | Injector Group-Fuel | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
170-5252 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 17***52 | Injector Group-Fuel | 1 |
| 9X***17 | Seal-O-Ring; (9.6mm Id) | 1 |
350-7555 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
| 35***55 | Injector Group-Fuel | 1 |
168-1699 Lines Gp-Fuel
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
| 09***64 | Grommet | 1 |
| 09***86 | Clamp; (Hose) | 2 |
174-6823 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 10***23 | Hose As | 1 |
| 10***69 | Hose As | 1 |
131-8913 Mounting Gp-Fuel Filter
| 13***13 | Mounting Group-Fuel Filter; (Engine Oil Filter) | 1 |
| 15***43 | Cover As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
116-5428 Pump & Mtg Gp-Fuel Transfer
| 09***70 | Washer-Sealing | 2 |
| 11***28 | Pump & Mtg Group-Fuel Transfer; (Fuel Transfer) | 1 |
| 19***82 | Tube As | 1 |
189-0351 Pump Gp-Fuel Injection
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
| 18***51 | Pump Group-Fuel Injection | 1 |
| 20***85 | Injector Group-Fuel | 1 |
130-0802 Pump Gp-Fuel Injection
| 13***02 | Pump Group-Fuel Injection; (Fuel Injection) | 1 |
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
| 21***63 | Injector Group-Fuel | 1 |
116-5438 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 11***38 | Pump Group-Fuel Priming; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
168-1685 Tank & Mtg Gp-Fuel
| 13***73 | Bolt As; (M12x1.75x25-mm) | 3 |
| 14***58 | Sheet | 1 |
| 16***85 | Tank & Mtg Group-Fuel; (Fuel) | 1 |
196-7204 Tank & Mtg Gp-Fuel
| 14***58 | Sheet | 1 |
| 16***88 | Tank Group-Fuel; (Fuel) | 1 |
| 19***04 | Tank & Mtg Group-Fuel | 1 |
196-7205 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
168-1688 Tank Gp-Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 12***70 | Plate | 1 |
| 15***50 | Connector As | 1 |
168-1686 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
281-2725 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
236-7796 Accumulator Gp-Brake -Uncharged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged
| 19***47 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
185-0298 Actuator Gp-Pump
| 15***41 | Piston | 1 |
| 18***98 | Actuator Group-Pump | 1 |
| 18***06 | Piston | 1 |
129-8053 Base Gp-Oil Filter -Hydraulic
| 12***53 | Base Group-Oil Filter; -Hydraulic | 1 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 13***28 | Shim; (0.1-mm Thk) | 2 |
239-6649 Coupling Gp-Flexible
| 09***11 | Pin; (Spring) | 8 |
| 09***12 | Setscrew-Socket; (M20x2.5x25-mm) | 2 |
| 17***69 | Insert-Coupling | 4 |
162-6285 Coupling Gp-Pump
| 09***11 | Pin; (Spring) | 4 |
| 16***85 | Coupling Group-Pump | 1 |
| 17***71 | Bolt; (M20x2.5x65-mm) | 4 |
177-1435 Coupling Gp-Pump
| 17***30 | Hub | 1 |
| 17***31 | Flange | 1 |
| 17***35 | Coupling Group-Pump; (Pump) | 1 |
175-2139 Cylinder & Lines Gp-Boom -Rh
| 15***80 | Cylinder & Seal Group-Boom; (Boom) | 1 |
| 17***39 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 17***81 | Lines Group-Boom; (Boom) | 1 |
175-2138 Cylinder & Lines Gp-Boom -Lh
| 15***80 | Cylinder & Seal Group-Boom; (Boom) | 1 |
| 17***38 | Cylinder & Lines Group-Boom; -L.H. | 1 |
| 17***80 | Lines Group-Boom; (Boom) | 1 |
150-4480 Cylinder & Seal Gp-Boom
| 15***25 | Cylinder Group-Boom; (Boom) | 1 |
| 15***80 | Cylinder & Seal Group-Boom; (Boom) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
150-4479 Cylinder & Seal Gp-Stick
| 15***15 | Cylinder Group-Stick; (Stick) | 1 |
| 15***79 | Cylinder & Seal Group-Stick; (Stick) | 1 |
| 7X***03 | Seal (Id=90.00mm); (Od=106.15mm) | 4 |
198-0152 Cylinder & Seal Gp-Stick
| 19***20 | Cylinder Group-Stick | 1 |
| 19***52 | Cylinder & Seal Group-Stick | 1 |
| 9X***97 | Seal; (Od=116.15mm) | 4 |
150-4125 Cylinder Gp-Boom
| 09***26 | Seal-O-Ring | 1 |
| 09***09 | Ring | 1 |
| 10***62 | Wear Ring | 1 |
150-4115 Cylinder Gp-Stick
| 08***33 | Bearing-Sleeve; (106.2mm Od) | 2 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
196-4120 Cylinder Gp-Stick
| 08***48 | Bearing-Sleeve; (120mm Lg) | 2 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
216-0041 Drive Gp-Auxiliary Pump
| 09***91 | Ball Bearing | 1 |
| 10***20 | Seal-O-Ring | 1 |
| 11***01 | Bolt-Socket Head; (M12x1.75x25-mm) | 4 |
177-2543 Drive Gp-Auxiliary Pump
| 09***91 | Ball Bearing | 1 |
| 11***01 | Bolt-Socket Head; (M12x1.75x25-mm) | 4 |
| 12***01 | Seal-O-Ring | 1 |
227-6114 Drive Gp-Swing -Without Motor, Rh
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 8 |
169-5529 Drive Gp-Swing
| 16***35 | Motor & Mtg Group-Swing; (Swing) | 1 |
| 16***29 | Drive Group-Swing | 1 |
| 16***32 | Drive Group-Swing; (Swing) | 1 |
169-5532 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 8 |
169-5528 Drive Gp-Swing
| 16***34 | Motor & Mtg Group-Swing; (Swing) | 1 |
| 16***28 | Drive Group-Swing | 1 |
| 16***30 | Drive Group-Swing; (Swing) | 1 |
169-5530 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 8 |
227-6113 Drive Gp-Swing -Without Motor, Lh
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 8 |
227-6157 Drive Gp-Swing -Rh
| 16***35 | Motor & Mtg Group-Swing; (Swing) | 1 |
| 22***14 | Drive Group-Swing; -Without Motor, Rh | 1 |
| 22***57 | Drive Group-Swing; -Rh | 1 |
227-6156 Drive Gp-Swing -Lh
| 16***34 | Motor & Mtg Group-Swing; (Swing) | 1 |
| 22***13 | Drive Group-Swing; -Without Motor, Lh | 1 |
| 22***56 | Drive Group-Swing; -Lh | 1 |
179-9341 Fastener Gp-Swing Drive & Mtr
| 09***55 | Pin | 4 |
| 11***74 | Bolt; (L=20mm) | 2 |
| 17***41 | Fastener Group-Swing Drive & Mtr | 1 |
148-8196 Filter & Lines Gp-Gen Motor
| 10***20 | Hose As | 1 |
| 12***27 | Plate | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
126-2075 Filter Gp-Oil
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
126-2080 Filter Gp-Oil
| 09***10 | Seal-O-Ring; (Id=4.80mm) | 6 |
| 09***81 | Seal-O-Ring | 1 |
| 12***80 | Filter Group-Oil; -Hydraulic | 1 |
173-3511 Filter Gp-Oil
| 09***81 | Seal-O-Ring | 1 |
| 12***81 | Filter Element As-Oil; (Standard Efficiency)(Hydraulic, Return) | 1 |
| 13***23 | Seal-O-Ring | 4 |
184-3930 Filter Gp-Oil
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 18***30 | Filter Group-Oil; -Hydraulic, Pilot Supply | 1 |
| 18***31 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
126-2112 Filter Gp-Oil
| 09***59 | Screw-Machine; (M6x1x3.4-mm) | 2 |
| 11***54 | Cover | 2 |
| 11***82 | Seal-O-Ring (Id=74.5mm) | 2 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
177-2520 Head Gp-Pump
| 12***62 | Seal-O-Ring | 1 |
| 12***84 | Pin; (Threaded) | 2 |
| 15***66 | Dowel | 2 |
116-3653 Housing Gp-Filter
| 11***53 | Housing Group-Filter | 1 |
| 13***34 | Ring; (Stop) | 1 |
| 14***68 | Screw; (Machine) (M4x0.7x10mm) | 8 |
175-7890 Hydraulic Ar
| 12***35 | Mounting Group-Main Control Valve | 1 |
| 15***46 | Lines Group-Pilot | 1 |
| 15***08 | Lines Group-Return; -Stick Lowering Control | 1 |
198-3110 Hydraulic Ar
| 12***35 | Mounting Group-Main Control Valve | 1 |
| 15***46 | Lines Group-Pilot | 1 |
| 15***08 | Lines Group-Return; -Stick Lowering Control | 1 |
159-7744 Lever Gp-Control -Hydraulic Activation Control
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***69 | Lever | 1 |
| 11***70 | Support Assem. | 1 |
175-7581 Lines Gp-Boom
| 10***50 | Clamp | 2 |
| 12***56 | Support As | 1 |
| 14***43 | Tube As | 1 |
175-7580 Lines Gp-Boom
| 10***50 | Clamp | 2 |
| 12***56 | Support As | 1 |
| 14***42 | Tube As | 1 |
150-5481 Lines Gp-Boom
| 08***66 | Hose As | 1 |
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 4 |
152-8020 Lines Gp-Boom
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 8 |
| 12***46 | Plate | 2 |
| 12***48 | Plate | 4 |
175-2132 Lines Gp-Front
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 12***77 | Clamp | 1 |
| 12***78 | Rubber | 2 |
160-5763 Lines Gp-Grapple
| 16***63 | Lines Group-Grapple | 1 |
| 16***64 | Hose As | 2 |
| 16***65 | Hose As | 2 |
131-8931 Lines Gp-Hyd Tank Air Press
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 09***91 | Hose As | 1 |
175-2127 Lines Gp-Hydraulic -Hydraulic Generator, Rotator
| 12***72 | Plate | 1 |
| 13***50 | Screen As; (Hydraulic Tank) | 1 |
| 13***38 | Guard | 2 |
168-9353 Lines Gp-Hydraulic Oil Cooler
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 11***83 | Hose As | 1 |
| 13***45 | Block | 1 |
176-0865 Lines Gp-Motor
| 11***49 | Fitting As; (Quick Disconnect) | 7 |
| 12***41 | Connector | 2 |
| 13***96 | Swivel Group | 1 |
150-8346 Lines Gp-Pilot
| 10***03 | Hose As (Nom 06, L=2600mm) | 1 |
| 12***07 | Hose As | 2 |
| 13***97 | Plate | 1 |
153-5907 Lines Gp-Pilot
| 10***38 | Hose As | 1 |
| 10***15 | Hose As | 1 |
| 10***66 | Hose As; (Nom 06, L=3730mm) | 1 |
153-5909 Lines Gp-Pilot
| 11***45 | Guard | 2 |
| 11***47 | Guard | 5 |
| 12***07 | Hose As | 6 |
175-2130 Lines Gp-Pilot
| 08***08 | Hose As (Nom 06, L=665mm) | 1 |
| 08***87 | Grommet | 1 |
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
153-5912 Lines Gp-Pilot
| 08***59 | Hose As | 1 |
| 08***84 | Hose As. | 1 |
| 09***61 | Strap; (Cable) | 5 |
175-2131 Lines Gp-Pilot
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 10***66 | Hose As; (Nom 06, L=3730mm) | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
168-9354 Lines Gp-Pilot -Fan Pump
| 14***53 | Hose As | 1 |
| 14***54 | Hose As | 1 |
| 14***11 | Bracket | 1 |
165-3357 Lines Gp-Pump
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 12***67 | Plate | 2 |
| 12***53 | Grommet; (Rubber) | 4 |
176-0359 Lines Gp-Return
| 14***93 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***27 | Connector Group | 1 |
175-2129 Lines Gp-Return
| 09***84 | Locknut; (M12x1.75-Thd) | 2 |
| 10***18 | Block | 1 |
| 12***05 | Valve As-Check; (Cooler Bypass) | 1 |
153-2208 Lines Gp-Return -Stick Lowering Control
| 15***73 | Block | 1 |
| 15***08 | Lines Group-Return; -Stick Lowering Control | 1 |
| 15***10 | Support As | 1 |
150-5482 Lines Gp-Stick
| 12***29 | Tube As | 2 |
| 12***95 | Valve; (Cushion) | 1 |
| 15***82 | Lines Group-Stick; (Stick) | 1 |
155-6551 Lines Gp-Stick
| 11***53 | Handle | 1 |
| 13***43 | Valve Group-Manual; (Auxiliary Hydraulic Lines) | 2 |
| 14***42 | Tube As | 2 |
168-9358 Lines Gp-Swing Motor
| 11***20 | Valve Group-Swing Cushion; -Anti-Reaction, Fine Swing | 1 |
| 12***32 | Block As | 1 |
| 12***25 | Tee | 1 |
318-1489 Lines Gp-Travel Motor
| 09***66 | Bolt; (M8x1.25x75-mm) | 4 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 2 |
| 14***18 | Connector As | 2 |
196-4892 Lines Gp-Travel Motor
| 10***18 | Grommet | 2 |
| 11***49 | Fitting As; (Quick Disconnect) | 4 |
| 12***41 | Connector | 2 |
175-7891 Lines Gp-Travel Motor
| 12***24 | Flange; (Special) | 4 |
| 17***91 | Lines Group-Travel Motor | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 8 |
165-9335 Motor & Mtg Gp-Swing
| 16***35 | Motor & Mtg Group-Swing; (Swing) | 1 |
| 21***77 | Motor Group-Swing | 1 |
| 6V***00 | Ring; (Retaining) (M35x1.5mm) | 1 |
165-9334 Motor & Mtg Gp-Swing
| 16***34 | Motor & Mtg Group-Swing; (Swing) | 1 |
| 21***76 | Motor Group-Swing | 1 |
| 6V***00 | Ring; (Retaining) (M35x1.5mm) | 1 |
176-0819 Motor & Mtg Gp-Travel
| 10***46 | Spacer; (22x38.1x25-mm Thk) | 20 |
| 17***17 | Drive Group-Travel Motor & Final | 1 |
| 17***19 | Motor & Mtg Group-Travel | 1 |
251-8483 Motor Gp-Hydraulic Generator
| 09***40 | Ring; (Retaining) | 1 |
| 11***83 | Ring; (Retaining) | 1 |
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
155-9107 Motor Gp-Piston
| 09***55 | Bolt; (Socket Head) | 2 |
| 09***47 | Pin, Dowel | 1 |
| 10***62 | Dowel | 2 |
170-9992 Motor Gp-Piston
| 09***39 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
215-9978 Motor Gp-Swing
| 09***39 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
215-9976 Motor Gp-Swing
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 2 |
| 13***13 | Valve Group-Solenoid | 1 |
| 17***94 | Valve Group-Relief | 2 |
215-9977 Motor Gp-Swing
| 09***73 | Seal-O-Ring (Id=5.80mm) | 2 |
| 13***16 | Valve Group | 1 |
| 17***91 | Valve Group-Relief; (Relief) | 2 |
165-9337 Motor Gp-Swing
| 09***73 | Seal-O-Ring (Id=5.80mm) | 2 |
| 13***16 | Valve Group | 1 |
| 16***37 | Motor Group-Swing | 1 |
165-9336 Motor Gp-Swing
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 2 |
| 13***13 | Valve Group-Solenoid | 1 |
| 16***36 | Motor Group-Swing; (Piston) | 1 |
178-0400 Motor Gp-Travel
| 03***82 | Seal-O-Ring; (47.3mm Id) | 1 |
| 09***22 | Plug | 1 |
| 09***90 | Bolt-Socket Head; (M14x2x60-mm) | 9 |
128-7435 Mounting Gp-Main Control Valve
| 10***74 | Guard; (20-cm) | 0 |
| 12***35 | Mounting Group-Main Control Valve | 1 |
| 12***20 | Bracket As | 1 |
171-9059 Pump & Mtg Gp-Hydraulic Fan
| 11***19 | Gasket | 1 |
| 13***21 | Support | 1 |
| 14***59 | Flange | 1 |
177-1436 Pump & Mtg Gp-Main Hydraulic
| 17***35 | Coupling Group-Pump; (Pump) | 1 |
| 17***36 | Pump & Mtg Group-Main Hydraulic; (Main Hydraulic) | 1 |
| 18***20 | Pump Group-Main Hydraulic | 1 |
162-6284 Pump & Mtg Gp-Main Hydraulic
| 16***84 | Pump & Mtg Group-Main Hydraulic | 1 |
| 16***85 | Coupling Group-Pump | 1 |
| 21***32 | Pump Group-Main Hydraulic | 1 |
177-2478 Pump Gp-Gear
| 17***78 | Pump Group-Gear; -Pilot | 1 |
| 17***77 | Pump Group-Gear; -Pilot | 1 |
| 2H***84 | Seal-O-Ring (Id=78.97mm) | 1 |
177-2577 Pump Gp-Gear
| 08***91 | Ring; (Square) | 1 |
| 09***73 | Plate | 1 |
| 09***75 | Guide | 2 |
186-1707 Pump Gp-Gear -Hydraulic Generator
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 15***55 | Kit-Seal; (Hydraulic Generator) | 1 |
| 15***57 | Seal-Lip Type | 1 |
216-0023 Pump Gp-Gear -Hydraulic
| 21***23 | Pump Group-Gear; -Hydraulic | 1 |
| 27***91 | Pump Group-Gear | 1 |
| 27***92 | Kit-Seal; (Gear Pump) | 1 |
201-5732 Pump Gp-Gear -Rotator
| 09***95 | Pin, Dowel | 4 |
| 13***58 | Cover-End | 1 |
| 13***15 | Seal-Shaft | 1 |
185-0220 Pump Gp-Main Hydraulic
| 12***75 | Plate | 1 |
| 17***20 | Head Group-Pump; (Pump) | 1 |
| 17***41 | Plate As | 1 |
242-6778 Pump Gp-Main Hydraulic
| 08***01 | Plug As | 3 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***92 | Seal | 1 |
188-4092 Pump Gp-Main Hydraulic
| 08***01 | Plug As | 3 |
| 12***13 | Seal; (Shaft) | 1 |
| 17***78 | Pump Group-Gear; -Pilot | 1 |
216-0032 Pump Gp-Main Hydraulic
| 17***20 | Head Group-Pump; (Pump) | 1 |
| 17***41 | Plate As | 1 |
| 17***42 | Cover | 1 |
216-0033 Pump Gp-Main Hydraulic
| 08***01 | Plug As | 3 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***92 | Seal | 1 |
194-8259 Pump Gp-Main Hydraulic
| 08***01 | Plug As | 3 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***92 | Seal | 1 |
173-3420 Pump Gp-Piston
| 15***31 | Swashplate | 1 |
| 15***32 | Shaft | 1 |
| 15***33 | Key | 1 |
194-8262 Rotating Gp-Pump
| 09***28 | Ring-Retaining; (External) | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
216-0034 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
283-5977 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
216-0028 Rotating Gp-Pump
| 14***60 | Ring; (Seal) | 2 |
| 17***02 | Pin | 1 |
| 17***03 | Piston As | 7 |
194-8260 Rotating Gp-Pump
| 09***28 | Ring-Retaining; (External) | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
155-9111 Rotating Gp-Pump -Hydraulic Fan
| 15***11 | Rotating Group-Pump; -Hydraulic Fan | 1 |
| 15***12 | Piston Assem. | 9 |
| 15***13 | Barrel | 1 |
283-5979 Rotating Gp-Pump
| 17***02 | Pin | 1 |
| 17***10 | Spring | 4 |
| 17***11 | Plate | 1 |
155-9135 Rotating Gp-Pump
| 15***12 | Piston Assem. | 9 |
| 15***15 | Plate | 1 |
| 15***16 | Guide; (Ball) | 1 |
216-0035 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
283-5978 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
188-4095 Rotating Gp-Pump
| 09***28 | Ring-Retaining; (External) | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
188-4096 Rotating Gp-Pump
| 11***20 | Screw; (M6x20-mm) | 14 |
| 14***60 | Ring; (Seal) | 2 |
| 17***02 | Pin | 1 |
188-4100 Rotating Gp-Pump
| 09***28 | Ring-Retaining; (External) | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
188-4067 Screen Gp-Hydraulic
| 18***67 | Screen Group-Hydraulic; -Pump Lines | 1 |
| 18***68 | Screen As; (Hydraulic) | 1 |
| 18***70 | Case | 1 |
170-9890 Screen Gp-Hydraulic
| 09***39 | Spring | 1 |
| 09***41 | Holder, Guide | 1 |
| 12***84 | Rod | 1 |
195-2863 Shaft Gp-Hydraulic Motor
| 10***99 | Ring-Retaining | 2 |
| 19***63 | Shaft Group-Hydraulic Motor | 1 |
| 19***64 | Bearing As | 1 |
137-3796 Swivel Gp
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 13***96 | Swivel Group | 1 |
158-9119 Swivel Gp
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 13***97 | Cover | 1 |
168-9367 Tank & Filter Gp-Hydraulic
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
168-9366 Tank & Mtg Gp-Hydraulic
| 16***66 | Tank & Mtg Group-Hydraulic; (Hydraulic) | 1 |
| 16***67 | Tank & Filter Group-Hydraulic; (Hydraulic) | 1 |
| 6I***23 | Spacer; (17x28x25-mm Thk) | 8 |
232-9731 Tank Gp-Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
209-8193 Tank Gp-Hydraulic
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
| 10***52 | Plug | 1 |
4d-0487 Valve As-Check
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
160-5885 Valve Gp-Flow Control & Relief -Hydraulic Generator
| 16***55 | Valve Group; (Check) | 1 |
| 16***56 | Valve-Needle; (Generator Speed) | 1 |
| 16***73 | Retainer | 1 |
122-7690 Valve Gp-Check
| 12***87 | Plug | 1 |
| 12***89 | Spring | 1 |
| 12***90 | Valve Group-Check; -Boom Ii | 1 |
127-7495 Valve Gp-Check
| 06***39 | Seal-O-Ring | 2 |
| 12***95 | Valve Group-Check | 1 |
| 24***93 | Ring-Backup | 4 |
185-0384 Valve Gp-Check -Slow Return
| 09***10 | Seal-O-Ring | 1 |
| 13***85 | Cover | 1 |
| 18***84 | Valve Group-Check; -Slow Return | 1 |
4t-5896 Valve Gp-Check
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4T***71 | Ring-Back-Up | 1 |
| 4T***96 | Valve Group-Check; -Pressure Reducing | 1 |
140-0685 Valve Gp-Check
| 09***98 | Spring, Check | 1 |
| 14***85 | Valve Group-Check; (Check) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
155-3872 Valve Gp-Check & Relief
| 14***51 | Valve Group-Relief; (Rh Boom Lines) | 1 |
| 14***52 | Valve Group-Check; (Rh Boom Lines) | 1 |
| 14***56 | Kit; (Stem) | 1 |
239-8980 Valve Gp-Control -Stick Load Control Valve
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 12***63 | Cover | 4 |
| 12***66 | Spring | 1 |
177-2642 Valve Gp-Control -Stick Load Control Valve
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 12***60 | Valve Group-Relief | 2 |
| 12***63 | Cover | 4 |
198-6078 Valve Gp-Control -Travel Speed
| 14***89 | Kit-Seal | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
171-0055 Valve Gp-Control
| 12***73 | Bolt-Shoulder; (M12x1.75x10-mm) | 4 |
| 12***74 | Retainer | 8 |
| 12***92 | Spring | 1 |
171-0054 Valve Gp-Control
| 12***45 | Body; (Valve) | 1 |
| 12***73 | Bolt-Shoulder; (M12x1.75x10-mm) | 4 |
| 12***74 | Retainer | 10 |
177-2641 Valve Gp-Control
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 1 |
| 12***63 | Cover | 4 |
| 12***66 | Spring | 3 |
156-0844 Valve Gp-Load Control
| 12***97 | Ring | 1 |
| 14***86 | Spring | 1 |
| 14***91 | Piston | 1 |
202-9264 Valve Gp-Load Control -Stick Lowering Control
| 14***51 | Valve Group-Relief; (Rh Boom Lines) | 1 |
| 14***52 | Valve Group-Check; (Rh Boom Lines) | 1 |
| 15***40 | Kit-Seal; (Load Control Valve) | 1 |
157-2283 Valve Gp-Load Control -Boom
| 09***71 | Seal-O-Ring (Id=2.80mm) | 1 |
| 10***84 | Bolt; (M5x0.8x8.5-mm) | 1 |
| 13***09 | Valve | 1 |
177-2640 Valve Gp-Main Control
| 17***60 | Valve Group-Relief; -Main | 1 |
| 17***40 | Valve Group-Main Control | 1 |
| 17***41 | Valve Group-Control | 1 |
165-9580 Valve Gp-Manifold & Reducing
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 1 |
| 09***95 | Spring, Relief | 1 |
161-1308 Valve Gp-Pilot
| 15***23 | Plate; (Switch) | 1 |
| 15***75 | Kit-Seal; (Pilot Valve Joystick) | 1 |
| 16***08 | Valve Group-Pilot; (Joystick) | 1 |
205-5519 Valve Gp-Pilot
| 20***15 | Kit-Plunger; (Pilot Valve) | 2 |
| 20***09 | Plate-Retaining | 1 |
| 20***10 | Cardan Kit; (Pilot Valve Joystick) | 1 |
123-2148 Valve Gp-Pilot
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
191-5700 Valve Gp-Pilot Relief
| 09***00 | Seal-O-Ring | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 18***59 | Ring; (Backup) | 2 |
122-7708 Valve Gp-Pressure Control -Boom Ii, Swing
| 12***64 | Body | 1 |
| 12***08 | Valve Group-Pressure Control; -Boom Ii, Swing | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
177-2522 Valve Gp-Pump Control
| 08***59 | Plug As | 1 |
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
177-2531 Valve Gp-Pump Control
| 09***94 | Pin, Dowel | 2 |
| 09***35 | Seat; (Spring) | 4 |
| 09***42 | Set Screw | 2 |
185-0247 Valve Gp-Pump Control
| 18***47 | Valve Group-Pump Control | 1 |
| 8T***69 | Bolt-Socket Hd; (M6 X 1.0 X 20) | 4 |
| 9X***80 | Seal-O-Ring | 3 |
140-0672 Valve Gp-Regeneration
| 10***73 | Seal-O-Ring | 5 |
| 13***42 | Shim; (1-mm Thk) | 1 |
| 13***43 | Shim; (0.5-mm Thk) | 1 |
255-5588 Valve Gp-Regeneration
| 13***42 | Shim; (1-mm Thk) | 1 |
| 13***43 | Shim; (0.5-mm Thk) | 1 |
| 13***44 | Shim; (0.2-mm Thk) | 1 |
179-9761 Valve Gp-Relief
| 14***87 | Block | 1 |
| 17***61 | Valve Group-Relief; (Relief) | 1 |
| 17***62 | Valve Group-Relief; (Relief) | 1 |
179-9762 Valve Gp-Relief
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
239-8920 Valve Gp-Relief
| 03***67 | Ring; (Back Up) | 1 |
| 18***68 | Ring; (Backup) | 2 |
| 23***20 | Valve Group-Relief; -Pilot Operated | 1 |
170-9994 Valve Gp-Relief
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
| 17***94 | Valve Group-Relief | 1 |
239-8976 Valve Gp-Relief
| 03***67 | Ring; (Back Up) | 1 |
| 18***67 | Seal; (Quad Ring) | 1 |
| 18***68 | Ring; (Backup) | 1 |
122-7756 Valve Gp-Relief -Negative Flow Control
| 12***48 | Spring | 1 |
| 12***49 | Valve | 1 |
| 12***52 | Plug | 1 |
127-6454 Valve Gp-Relief
| 12***54 | Valve Group-Relief; -Grapple | 1 |
| 23***66 | Valve Group-Relief; -Grapple | 1 |
177-2708 Valve Gp-Relief
| 03***67 | Ring; (Back Up) | 1 |
| 17***08 | Valve Group-Relief | 1 |
| 18***67 | Seal; (Quad Ring) | 1 |
122-7750 Valve Gp-Relief -Negative Flow Control
| 12***48 | Spring | 1 |
| 12***49 | Valve | 1 |
| 12***50 | Valve Group-Relief; -Negative Flow Control | 1 |
122-7660 Valve Gp-Relief
| 03***67 | Ring; (Back Up) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 2 |
| 12***60 | Valve Group-Relief | 1 |
231-3866 Valve Gp-Relief
| 00***92 | Seal-O-Ring | 1 |
| 23***66 | Valve Group-Relief; -Grapple | 1 |
| 23***40 | Kit-Seal; (Relief Valve) | 1 |
171-0060 Valve Gp-Relief -Main
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 10***40 | Collar | 1 |
| 10***41 | Ring; (Retaining) | 1 |
170-9991 Valve Gp-Relief
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
| 17***91 | Valve Group-Relief; (Relief) | 1 |
107-7058 Valve Gp-Selector
| 10***58 | Valve Group-Selector; -Hydraulic Activation Control | 1 |
| 10***62 | Cover | 1 |
| 10***63 | Cover | 1 |
123-2430 Valve Gp-Shuttle
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 12***31 | Body-Valve | 1 |
| 12***52 | Connector | 2 |
121-1491 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
131-5745 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
127-7487 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***87 | Valve Group-Solenoid | 1 |
| 12***88 | Coil As | 2 |
3e-9205 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
131-5760 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
137-3713 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 13***39 | Orifice | 1 |
| 13***13 | Valve Group-Solenoid | 1 |
121-1490 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
111-9916 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
4z-5913 Valve Gp-Control
| 12***54 | Valve Group-Relief; -Grapple | 1 |
| 12***87 | Valve Group-Solenoid | 1 |
| 12***95 | Valve Group-Check | 1 |
116-3420 Valve Gp-Swing Cushion
| 09***02 | Ring | 2 |
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
266-7843 Valve Gp-Travel Counterbalance
| 03***82 | Seal-O-Ring; (47.3mm Id) | 2 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
165-9338 Valve Gp-Travel Counterbalance
| 03***82 | Seal-O-Ring; (47.3mm Id) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 2 |
Implements
146-5665 Boom Gp
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 1 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
198-6502 Boom Gp
| 08***72 | Pin; (Dia 99.85mm) | 1 |
| 08***44 | Plate | 2 |
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 1 |
153-7637 Lines Gp-Grease
| 03***48 | Clip; (11.11mm .437in Id) | 14 |
| 08***40 | Plate | 3 |
| 11***79 | Hose As | 1 |
150-5479 Lines Gp-Grease
| 08***38 | Plate As | 2 |
| 15***79 | Lines Group-Grease | 1 |
| 15***16 | Tube As | 1 |
198-9891 Linkage Ar-Material Handler
| 15***79 | Lines Group-Grease | 1 |
| 15***80 | Lighting Group-Boom; (Boom) | 1 |
| 15***81 | Lines Group-Boom; (Boom) | 1 |
175-2134 Linkage Ar-Material Handler
| 14***65 | Boom Group | 1 |
| 14***07 | Stick Group | 1 |
| 15***79 | Cylinder & Seal Group-Stick; (Stick) | 2 |
148-0807 Stick Gp
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
198-8038 Stick Gp
| 08***72 | Pin; (Dia 99.85mm) | 1 |
| 08***44 | Plate | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
Lubrication System
166-1329 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 16***28 | Base Assem. | 1 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 5S***34 | Seal-O-Ring; (97.79mm Id) | 1 |
| 7C***42 | Cover; (Filter Base) | 1 |
133-7003 Filler Gp-Engine Oil
| 06***55 | Seal-O-Ring (Id=47.22mm) | 3 |
| 13***03 | Filler Group-Engine Oil; (Engine Oil) | 1 |
| 13***78 | Tube As; (Oil Filler) | 1 |
144-6648 Filter Gp-Engine Oil
| 03***35 | Connector-Flared | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
185-8764 Filter Gp-Engine Oil
| 03***35 | Connector-Flared | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
123-0783 Valve Gp-Fluid Sampling
| 12***83 | Fitting Group-Fuel Lines; -Fuel | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
133-7001 Gauge Gp-Oil Level (Dipstick)
| 03***28 | Clip; (31.8mm Id) | 1 |
| 13***01 | Gauge Group-Oil Level (Dipstick); (Oil Level) (Dipstick) | 1 |
| 15***15 | Gauge As-Oil Level; (Dipstick) | 1 |
6i-6347 Lines Gp-Engine Oil Drain
| 09***88 | Clamp; (Hose) | 1 |
| 5P***43 | Hose 34 cm (13.39 In.) | 0 |
| 6I***47 | Lines Group-Drain | 1 |
175-1416 Lines Gp-Turbocharger Oil
| 09***56 | Bushing; (Terminal) | 1 |
| 10***69 | Tube As; (Oil) | 1 |
| 11***42 | Adapter | 1 |
236-5476 Lines Gp-Turbocharger Oil
| 01***24 | Bushing To Supply Port | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
131-8914 Mounting Gp-Engine Oil Filter
| 13***14 | Mounting Group-Engine Oil Filter; (Engine Oil Filter) | 1 |
| 13***42 | Support As | 1 |
| 15***02 | Support As | 1 |
151-6538 Mounting Gp-Fumes Disposal
| 13***09 | Grommet | 1 |
| 15***38 | Mounting Group-Fumes Disposal; (Fumes Disposal) | 1 |
| 15***67 | Support As | 1 |
117-2746 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 11***03 | Tube Assem. | 1 |
| 11***46 | Pump Group-Engine Oil | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
Machine Arrangement
175-7888 Chassis Ar
| 12***15 | Alarm Group-Travel; -Back Up | 1 |
| 13***10 | Counterweight Group | 1 |
| 13***81 | Horn Group-Electric; (Electric) | 1 |
198-3109 Chassis Ar
| 12***15 | Alarm Group-Travel; -Back Up | 1 |
| 13***10 | Counterweight Group | 1 |
| 13***81 | Horn Group-Electric; (Electric) | 1 |
198-3107 General Ar
| 17***51 | Engine Ar | 1 |
| 17***16 | Installation Ar-Engine; (Engine) | 1 |
| 19***91 | Frame Ar-Undercarriage | 1 |
175-7885 General Ar
| 17***51 | Engine Ar | 1 |
| 17***16 | Installation Ar-Engine; (Engine) | 1 |
| 17***85 | General Ar | 1 |
Operator Station
124-0251 Air Conditioner & Mounting Gp
| 09***61 | Strap; (Cable) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***88 | Filter Element-Cab Air; (Air Conditioner/Cab Heater) | 1 |
153-2809 Air Conditioner Ar
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 12***51 | Air Conditioner & Mounting Group | 1 |
| 15***01 | Lines Group-Air Conditioner; (Air Conditioner) | 1 |
152-5085 Air Conditioner Gp
| 03***38 | Clamp | 1 |
| 09***92 | Washer, Tooth | 2 |
| 10***26 | Wheel As-Blower | 2 |
220-0171 Air Conditioner Gp
| 03***38 | Clamp | 2 |
| 09***92 | Washer, Tooth | 2 |
| 10***26 | Wheel As-Blower | 2 |
145-3320 Bracket Gp-Lifting
| 14***20 | Bracket Group-Lifting; (Cab Lift) | 1 |
| 7X***68 | Bolt; (M20x2.5x180-mm) | 4 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
127-6515 Cab & Mounting Gp
| 11***58 | Plate | 2 |
| 11***51 | Plate-Cat; (Locate Behind | 1 |
| 12***15 | Cab & Mounting Group | 1 |
234-1897 Cab & Mounting Gp
| 11***58 | Plate | 2 |
| 11***51 | Plate-Cat; (Locate Behind | 1 |
| 13***45 | Cover As; (Panel) | 1 |
127-6516 Cab Gp
| 12***16 | Cab Group | 1 |
| 13***94 | Door Group-Cab; (Cab) | 1 |
| 13***95 | Window Group-Front; (Front) | 1 |
234-1898 Cab Gp
| 13***94 | Door Group-Cab; (Cab) | 1 |
| 13***95 | Window Group-Front; (Front) | 1 |
| 13***71 | Cab Group | 1 |
134-3871 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 14 |
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
141-6155 Compressor Gp-Refrigerant
| 13***42 | Bracket | 1 |
| 14***55 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
| 14***32 | Bracket; (Mounting) | 1 |
218-0324 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 21***24 | Compressor Group-Refrigerant | 1 |
141-9676 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***69 | Valve Group-Relief; (Refrigerant Compressor) | 1 |
| 14***76 | Compressor Group-Refrigerant; (Clutch & Refrig) | 1 |
154-6363 Condenser & Mtg Gp-Refrigerant
| 14***61 | Condenser As | 1 |
| 15***63 | Condensor Group; (Refrigerant) | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
111-6278 Console Gp-Operator
| 11***78 | Console Group-Operator | 1 |
| 11***79 | Console Group-Operator; -Lh | 1 |
| 11***80 | Console Group-Operator; -Rh | 1 |
111-6280 Console Gp-Operator -Rh
| 11***80 | Console Group-Operator; -Rh | 1 |
| 11***12 | Support | 1 |
| 11***14 | Panel | 1 |
111-6279 Console Gp-Operator -Lh
| 11***79 | Console Group-Operator; -Lh | 1 |
| 11***13 | Support | 1 |
| 11***16 | Cover | 1 |
150-1387 Control Gp-Air & Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
164-9499 Control Gp-Handle
| 08***70 | Sleeve | 8 |
| 16***89 | Kit-Boot; (Joystick) | 1 |
| 16***99 | Control Group-Handle; -Joystick | 1 |
180-8007 Control Gp-Heat & Air Cond
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 4 |
217-2317 Control Gp-Heat & Air Cond
| 21***17 | Control Group-Heat & Air Cond | 1 |
| 21***20 | Clip | 2 |
193-1050 Control Gp-Joystick
| 11***32 | Pin | 1 |
| 14***73 | Lever -Rh; (Rh) | 1 |
| 14***75 | Boot -Rh; (Rh) | 1 |
193-1052 Control Gp-Joystick
| 11***32 | Pin | 1 |
| 14***72 | Lever -Lh; (Lh) | 1 |
| 14***74 | Boot -Lh; (Lh) | 1 |
164-9498 Control Gp-Joystick -Lh
| 11***32 | Pin | 1 |
| 14***72 | Lever -Lh; (Lh) | 1 |
| 14***74 | Boot -Lh; (Lh) | 1 |
164-9497 Control Gp-Joystick -Rh
| 11***32 | Pin | 1 |
| 14***73 | Lever -Rh; (Rh) | 1 |
| 14***75 | Boot -Rh; (Rh) | 1 |
153-5913 Control Gp-Pilot Operated Hyd
| 08***29 | Spacer; (9x19x30-mm Thk) | 6 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 8 |
| 10***31 | Connector-Filter | 2 |
111-6284 Control Gp-Pilot Operated Hyd
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
| 09***32 | Knob; (Lh Travel Lever) | 1 |
| 09***33 | Knob; (Rh Travel Lever) | 1 |
219-3047 Control Gp-Travel
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
| 09***32 | Knob; (Lh Travel Lever) | 1 |
| 09***33 | Knob; (Rh Travel Lever) | 1 |
4i-6631 Cover Gp-Storage
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 10***89 | Nut Assem.; (M6x1) | 3 |
| 3E***20 | Screw; (M3x0.5x10-mm) | 2 |
130-5594 Door Gp-Cab
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 6 |
| 10***61 | Guard | 1 |
| 11***20 | Straiker Bolt; (Striker) | 1 |
124-0254 Duct Gp-Air
| 11***89 | Rubber; (Cushion) | 1 |
| 12***54 | Duct Group-Air | 1 |
| 12***94 | Duct | 1 |
124-0253 Duct Gp-Defroster
| 12***53 | Duct Group-Defroster | 1 |
| 12***95 | Duct | 1 |
| 12***96 | Hose As | 1 |
130-5424 Guard Ar-Overhead
| 12***90 | Guard Group-Overhead; -Cab | 1 |
| 13***69 | Lighting Group-Flood | 1 |
| 13***24 | Guard Ar-Overhead | 1 |
127-0290 Guard Gp-Overhead
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 12***66 | Guard As; (Front) | 1 |
139-5781 Horn Gp-Electric
| 12***68 | Harness As | 1 |
| 12***69 | Bracket | 1 |
| 13***81 | Horn Group-Electric; (Electric) | 1 |
153-2801 Lines Gp-Air Conditioner
| 09***63 | Grommet | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
153-2800 Lines Gp-Air Conditioner
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
154-6362 Lines Gp-Heater
| 10***18 | Grommet | 1 |
| 10***53 | Grommet | 1 |
| 15***62 | Lines Group-Heater; (Heater) | 1 |
153-2802 Lines Gp-Heater
| 15***02 | Lines Group-Heater; (Heater) | 1 |
| 15***41 | Bracket | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
7y-0059 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
160-2593 Mirror Gp
| 11***97 | Bar | 2 |
| 11***79 | Clip | 2 |
| 16***93 | Mirror Group | 1 |
147-7982 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***82 | Motor Group-Window Wiper; (Window Wiper) (Upper) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
139-5133 Mounting Gp-Cab
| 13***21 | Locator | 1 |
| 13***33 | Mounting Group-Cab; (Cab) | 1 |
| 14***09 | Plate | 4 |
175-2123 Operator Ar
| 11***78 | Console Group-Operator | 1 |
| 11***81 | Support Group-Seat | 1 |
| 11***84 | Control Group-Pilot Operated Hydraulic | 1 |
129-4608 Platform Gp-Operator
| 09***68 | Grommet | 1 |
| 12***59 | Grommet | 2 |
| 12***08 | Platform Group-Operator; (Operator) | 1 |
151-3465 Riser Ar-Cab
| 13***33 | Mounting Group-Cab; (Cab) | 1 |
| 14***57 | Riser Group-Cab; (Cab) | 1 |
| 14***20 | Bracket Group-Lifting; (Cab Lift) | 1 |
141-0357 Riser Gp-Cab
| 14***57 | Riser Group-Cab; (Cab) | 1 |
| 14***98 | Riser Group-Cab; (Cab) | 1 |
| 14***43 | Plate; (Side) | 1 |
144-7098 Riser Gp-Cab
| 05***86 | Clip | 1 |
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 10***83 | Handle - Grab | 1 |
132-8078 Screen Gp-Sun
| 11***88 | Hook | 8 |
| 13***78 | Screen Group-Sun; -Cab | 1 |
| 13***22 | Roller Blind As | 1 |
122-9625 Seat Belt Gp
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
111-6433 Seat Gp
| 11***33 | Seat Group | 1 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
| 13***24 | Kit-Handle Adjuster; (Seat) | 1 |
126-3893 Seat Gp
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 12***92 | Seat Group-Suspension; (Suspension) | 1 |
| 12***93 | Seat Group | 1 |
126-3892 Seat Gp-Suspension
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 11***33 | Seat Group | 1 |
| 12***26 | Suspension Group-Seat | 1 |
111-6281 Support Gp-Seat
| 11***81 | Support Group-Seat | 1 |
| 13***14 | Support As; (Seat) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
124-3926 Suspension Gp-Seat
| 11***66 | Kit-Stop; (Seat) | 1 |
| 12***26 | Suspension Group-Seat | 1 |
| 12***04 | Plate | 2 |
8r-1774 Tank Gp-Window Washer
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
141-0363 Washer Gp-Window
| 09***61 | Strap; (Cable) | 2 |
| 11***51 | Support | 1 |
| 14***63 | Washer Group-Window; (Window) | 1 |
188-3546 Window Gp-Cab -Rear
| 18***46 | Window Group-Cab; -Rear | 1 |
146-6231 Window Gp-Door
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***57 | Screw-Machine; (M5x0.8x5.2-mm) | 3 |
| 14***31 | Window Group-Door; (Door) | 1 |
130-5595 Window Gp-Front
| 11***85 | Bumper | 2 |
| 11***05 | Ring | 2 |
| 11***33 | Bearing-Ball | 2 |
153-2324 Wiper Gp-Window -Lower
| 12***40 | Blade As-Wiper; (330-mm)(Front) | 1 |
| 13***98 | Motor As; (Window Wiper) (Lower) | 1 |
| 14***14 | Bracket As | 1 |
101-0742 Wiper Pivot Gp
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 20***23 | Cap; (Wiper) | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
Power Train
247-4563 Brake Gp-Parking
| 06***02 | Seal-O-Ring | 1 |
| 16***06 | Pin-Spring | 20 |
| 16***10 | Ring-Retaining | 1 |
176-1586 Chain Gp-Drive
| 14***55 | Pin-Spring | 2 |
| 17***86 | Chain Group-Drive | 1 |
| 18***99 | Link-Master | 1 |
176-0817 Drive Gp-Travel Motor & Final
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 17***17 | Drive Group-Travel Motor & Final | 1 |
| 17***69 | Reducer Group-Speed | 1 |
195-7837 Drive Gp-Travel Motor & Final
| 14***55 | Pin-Spring | 2 |
| 17***19 | Motor & Mtg Group-Travel | 2 |
| 17***86 | Chain Group-Drive | 2 |
176-0816 Drive Gp-Travel Motor & Final
| 17***24 | Drive Group-Wheel | 2 |
| 17***25 | Drive Group-Wheel | 2 |
| 17***26 | Drive Group-Wheel | 2 |
176-0024 Drive Gp-Wheel
| 17***24 | Drive Group-Wheel | 1 |
| 17***14 | Axle Group-Drive | 1 |
| 17***68 | Bearing Group | 1 |
176-0026 Drive Gp-Wheel
| 17***26 | Drive Group-Wheel | 1 |
| 17***16 | Axle As | 1 |
| 17***68 | Bearing Group | 1 |
195-7840 Drive Gp-Wheel -Chain Driven, Center
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 6 |
| 17***70 | Seal-Lip Type | 1 |
| 18***11 | Axle As | 1 |
176-0025 Drive Gp-Wheel
| 17***25 | Drive Group-Wheel | 1 |
| 17***15 | Axle As | 1 |
| 17***68 | Bearing Group | 1 |
195-7841 Drive Gp-Wheel -Chain Driven
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 6 |
| 17***70 | Seal-Lip Type | 1 |
| 18***14 | Axle As | 1 |
195-7839 Drive Gp-Wheel -Motor Driven
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 6 |
| 17***70 | Seal-Lip Type | 1 |
| 17***71 | Shaft-Drive | 1 |
249-0387 Planetary Gp-Final Drive
| 09***73 | Plug, Shipping | 9 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 6 |
| 17***32 | Spacer | 1 |
198-3108 Power Train Ar
| 16***28 | Drive Group-Swing | 1 |
| 16***29 | Drive Group-Swing | 1 |
| 17***41 | Fastener Group-Swing Drive & Mtr | 1 |
175-7886 Power Train Ar
| 16***28 | Drive Group-Swing | 1 |
| 16***29 | Drive Group-Swing | 1 |
| 17***86 | Power Train Ar | 1 |
176-1569 Reducer Gp-Speed
| 17***69 | Reducer Group-Speed | 1 |
| 24***63 | Brake Group-Parking | 1 |
| 24***87 | Planetary Group-Final Drive | 1 |
176-0823 Wheel & Mtg Gp-Drive
| 17***23 | Wheel & Mtg Group-Drive | 1 |
| 17***87 | Wheel | 1 |
| 7X***88 | Bolt; (M20x2.5x160-mm) | 36 |
196-4890 Wheel & Mtg Gp-Drive
| 19***90 | Wheel & Mtg Group-Drive | 1 |
| 21***91 | Cap-Plastic | 2 |
| 24***77 | Tire & Rim Ar | 1 |
Service Equipment And Supplies
198-3111 Plate & Film Gp
| 09***00 | Seal-Stopper-Place On Door.Related | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 10***45 | Film-Identification; (Cat) | 2 |
180-5663 Plate & Film Gp
| 12***30 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 12***28 | Film-Instruction; (Hydraulic System) | 1 |
175-7929 Plate & Film Gp
| 09***00 | Seal-Stopper-Place On Door.Related | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 10***45 | Film-Identification; (Cat) | 2 |
180-5668 Plate & Film Gp
| 12***34 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***31 | Film-Instruction; (Hydraulic System) | 1 |
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
180-5666 Plate & Film Gp
| 11***61 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***31 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
Undercarriage
196-4891 Frame Ar-Undercarriage
| 16***36 | Gear & Bearing Group-Swing; (Swing) | 1 |
| 19***96 | Frame Group-Undercarriage | 1 |
| 19***47 | Walkway Group | 1 |
175-7889 Frame Ar-Undercarriage
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 16***36 | Gear & Bearing Group-Swing; (Swing) | 1 |
| 17***89 | Frame Ar-Undercarriage | 1 |
175-7923 Frame Gp-Undercarriage
| 15***26 | Coupling-Pipe | 1 |
| 17***34 | Frame As-Undercarriage | 1 |
| 17***23 | Frame Group-Undercarriage | 1 |
195-7896 Frame Gp-Undercarriage
| 15***26 | Coupling-Pipe | 1 |
| 18***38 | Cover As | 8 |
| 18***40 | Cover | 4 |
176-0848 Guard Gp-Undercarriage
| 17***48 | Guard Group-Undercarriage | 1 |
| 17***67 | Guard As-Outer | 2 |
| 17***68 | Guard As-Outer | 2 |
Work Tools
150-9438 Adapter Gp-Work Tool
| 15***38 | Cross Head Adapter; (Magnet Mount) | 1 |
| 19***16 | Adapter As | 1 |
| 19***50 | Spacer | 2 |
242-4203 Link Gp-Grapple
| 23***72 | Linkage Group-Work Tool | 1 |
| 24***03 | Link Group-Work Tool | 1 |
| 4I***16 | Pin | 1 |
236-5672 Linkage Gp-Grapple
| 09***65 | Pin-Cotter | 1 |
| 19***50 | Spacer | 2 |
| 19***79 | Plate | 2 |
W345B II serial number reference
The PIN plate on a W345B Series II sits on the right side of the upper frame near the operator's cab entry, low on the frame rail below the cab door; a duplicate PIN is usually stamped into the frame itself nearby. Read the first three characters as the serial prefix (identifies the model/build series), followed by a running sequence number for that build lot - the prefix is what a parts or service manual is indexed against, not the sequence number.
| Prefix | Identifies | Notes |
|---|---|---|
| ANJ | W345B Series II Wheeled Material Handler | Covers ANJ00001-and-up. Fitted with the Cat 3176C ATAAC diesel, net power about 239 kW (321 hp) at 2000 rpm. Not documented against an official Cat serial-prefix chart - confirm with your dealer before ordering parts against this prefix. |
Frequently asked questions
What engine does the Caterpillar W345B II use?
It runs the Cat 3176C ATAAC diesel - a turbocharged, air-to-air aftercooled six-cylinder engine displacing 10.3 L (628.6 cu in), rated at approximately 239 kW (321 hp) net at 2000 rpm (257 kW / 345 hp gross).
What is the operating weight of the W345B II?
In its base wheeled material-handler configuration, the W345B II runs approximately 66,040 kg (145,590 lb). This figure is specific to the wheeled MH chassis and should not be confused with the lighter tracked 345B MH Series II sibling.
What replaced the Caterpillar W345B II?
The 345C MH is its successor, moving from the 3176C ATAAC to the larger-displacement, lower-revving Cat C13 engine for roughly 8% more power and improved fuel economy on the same material-handling duty cycle.
What W345B II owners discuss
What engine is in the W345B II and what quirks do owners flag with it?
The W345B II wheeled material handler runs the Cat 3176C ATAAC diesel, rated around 239 kW (320 hp), with PEEC-generation electronic control. Owners of this engine family flag a few recurring items: fuel injector copper sleeve seals can fail over time, letting coolant migrate into the fuel system or oil - unexplained coolant loss or fuel that smells or looks off is the tell. On early PEEC-era engines the boost sensor hose sits low on the block; trapped water can freeze in cold weather and drop the engine into a low-boost, low-power mode until it thaws or the hose is cleared. Turbo failures on this engine are more often traced to oil starvation (slow startup lube, restricted supply line) than a bad turbo itself. Have your dealer verify any injector sleeve or ECM work before it's treated as routine.
What do operators say about the rotation and hydraulic circuit on this material handler?
The rotate/slew circuit runs off its own dedicated gear pump, roughly 38 L/min (10 gpm), separate from the main implement pumps, feeding a fully adjustable rotate valve so the operator can tune grapple or magnet spin speed to the load. Because scrap and demolition duty means near-continuous full-circle rotation rather than occasional digging swings, rotator seals and the rotate motor wear faster than on a standard excavator. Leak-down at the rotator coupling or sluggish/uneven rotation speed after the seals age is a common complaint. Setting rotate speed to match attachment weight, instead of running it wide open on every cycle, is the operator habit that keeps wear in check.
What wear patterns are typical for the wheeled undercarriage and slew bearing on this class of machine?
Wheeled material handlers spend their life on scrap and mill-yard surfaces littered with sheared metal and debris, so tires wear noticeably faster than on a clean job site unless the yard is kept pushed clear. Outrigger and stabilizer feet develop play from constant setup and breakdown cycles. The slew ring/bearing takes the brunt of sustained high-reach, high-rotation grapple work; a chipped or cracked gear tooth on the slew ring is a known failure point, and the fix is a full bearing assembly replacement rather than a partial repair or field weld - there's no way around swapping the whole unit once it's damaged. Check slew ring backlash and tire condition at every PM interval, and have your dealer verify any suspected bearing damage before committing to a replacement.
What electrical or sensor gremlins come up on this generation of Cat machine?
Moisture getting into engine and cab harness connectors, corroded pins, and worn ground straps account for a lot of the unpredictable fault codes and no-start complaints on Cat machines of this vintage. Monitor or gauge panel dropouts more often trace back to a bad connector, blown fuse, or failed relay than to the panel itself. Coolant temperature gauge complaints frequently resolve to a wiring continuity or ground issue rather than a bad sensor. Before condemning a sensor, clean and dry the harness connectors and check grounds first. Have your dealer verify with a proper ECM diagnostic scan before replacing electronic components.
How does grapple/magnet duty cycle affect this machine compared to a standard digging excavator?
As a material handler rather than a digger, this machine spends more of its working hours near full engine rpm and full hydraulic flow, cycling the grapple or magnet open/close/rotate continuously instead of the intermittent dig-swing-dump pattern of a standard excavator. That means hydraulic oil temperature and pump wear track duty cycle and rotation aggressiveness more than raw hour-meter readings. Running heavy grapples or magnets at maximum rotate speed on every cycle is the behavior owners point to as the biggest accelerant of slew bearing and rotator seal wear relative to a bucket machine doing the same hours.
What should a buyer check on a used W345B II specifically?
Confirm the serial/prefix plate matches a genuine wheeled MH configuration rather than parts or documentation crossed over from a tracked 345B MH chassis or a straight digging 345B. Then check: slew ring backlash and gear tooth condition (a cracked tooth means a full bearing swap, not a cheap fix); rotator hose and seal condition at the grapple or magnet mount for leak-down; tire and stabilizer wear consistent with scrap-yard debris exposure; coolant level and color as a check against injector sleeve seal leakage into the fuel or oil; and the ECM fault history for boost or low-power codes. Run the grapple or magnet through full rotation and clamp range to confirm smooth control response. Have your dealer pull the full service history and run a diagnostic scan before finalizing an offer.
Is a broken slew ring tooth on this type of machine a DIY-fixable problem?
No. Community experience with this Cat platform's slew ring is consistent: once a gear tooth is chipped or cracked, dealers price out and supply the entire bearing assembly rather than a spot repair, since the ring gear and bearing race are a single machined unit. There's no practical field weld or partial-tooth fix that holds up under continuous rotation load. Given the safety implications of a compromised slew bearing supporting a loaded grapple or magnet overhead, have your dealer verify the extent of damage and the replacement procedure before returning the machine to service.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific W345B II part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.