Caterpillarwork toolshear-demolition/scrap

Caterpillar VHS-50

Maintenance schedule, common problems & OEM parts breakdown

The Caterpillar VHS-50 is a passive, excavator-mounted hydraulic demolition and scrap shear built by Verachtert under the Caterpillar Work Tools B.V. lineage, not a self-propelled machine. It carries no engine, ECM, or onboard hydraulic reservoir of its own; the jaw's closing force comes entirely from the carrier excavator's auxiliary hydraulic circuit through a pair of high-pressure hose connections. Two generations exist. The base VHS-50 (sold roughly 1996-2005) runs about 3.6 t (7,937 lb) operating weight with a 665 mm (26.2 in) jaw opening, 690 mm (27.2 in) blade depth, and roughly 5,880 kN (about 1,322,000 lbf) of cutting force, sized for excavators in the 30 to 42 t class. The later VHS-50/3 (roughly 2009-2012) trims the jaw opening to 563 mm (22.2 in), deepens the blade to 703 mm (27.7 in), sets an overall length near 3,638 mm (143.2 in), and pushes cutting force to about 6,818 kN (1,533,000 lbf) at around 4 t (8,818 lb) operating weight, scaled for larger 35 to 60 t carriers. The VHS-50 sits mid-to-upper in Caterpillar's Verachtert-built VHS-10/30/40/50/60/70 demolition-shear family, one size up from the VHS-40 and one down from the VHS-60/70 siblings. Both generations are fixed-jaw units mounted with a standard two-pin-plus-H-link arrangement rather than a proprietary quick-coupler, with adapter brackets available to fit non-Cat carriers in the same weight class.

The generation change tracks a capability shift more than a cosmetic redesign: the /3 refresh traded some jaw opening for meaningfully more cutting force and a wider carrier window, letting the same nameplate scale onto bigger excavators as demolition contractors moved to heavier iron. Serial records only firm up part of that story, the base VHS-50 carries a confirmed factory prefix in Caterpillar's parts catalog, while no distinct prefix has surfaced for the VHS-50/3, so dating and parts-matching a later unit leans more on the data plate and dealer records than on a published range. No factory successor is documented specifically for the VHS-50; Caterpillar's current S-series mobile scrap and demolition shears occupy a similar carrier segment today, but the VHS family kept selling and getting dealer support in parallel rather than being formally replaced. That is exactly why the VHS-50 still matters in the used and parts market: with thin generation-specific documentation, buyers and parts counters judge remaining life on jaw and insert wear, pin and bushing play, and weld condition around the pin bosses rather than on a model-year spec sheet, and a structurally sound unit remains a viable working tool on 30-60 t carriers regardless of which generation badge it wears.

Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.

Caterpillar VHS-50 specifications

Engine

Power source	Passive hydraulic work tool, no onboard engine. Driven entirely by the carrier excavator's hydraulic system.
Displacement / cylinders / emissions tier	Not applicable — this shear has no engine of its own.

Weights

Operating weight, earlier generation	approx. 3.6 t (7,937 lb)
Operating weight, later generation	approx. 4 t (8,818 lb)
Operating weight note	Figures vary by generation/configuration (base shear vs. with rotator and mounting bracket); one listing shows up to 4.5 t (9,921 lb) with rotator fitted.
Shipping weight	Not separately documented — treat as close to operating weight for a passive attachment.
Ground pressure	Not applicable / not published — this is an excavator-mounted work tool, not a ground-bearing machine.

Dimensions

Overall length, later generation	approx. 3,638 mm (143.2 in)
Jaw opening, later generation	approx. 563 mm (22.2 in)
Blade/wrench opening depth, later generation	approx. 703 mm (27.7 in)
Jaw opening, earlier generation	approx. 665 mm (26.2 in)
Blade opening depth, earlier generation	approx. 690 mm (27.2 in)
Width / height / other transport dimensions	Not documented for this model — not published in available factory or dealer literature.

Performance

Cutting force, later generation	approx. 6,818 kN (1,533,000 lbf)
Cutting force, earlier generation	approx. 5,880 kN (1,322,000 lbf)
Recommended carrier weight class, earlier generation	approx. 30 to 42 t carrier excavators
Recommended carrier weight class, later generation	approx. 35 to 60 t carrier excavators
Travel speed / gradeability	Not applicable — this is a non-self-propelled excavator attachment.

Service capacities (summary)

Fuel tank	Not applicable — no onboard engine or fuel tank.
Hydraulic system	No dedicated onboard reservoir; runs off the carrier excavator's hydraulic circuit. Oil flow and pressure requirements for this exact model are not documented in available literature — verify with your dealer against the carrier's auxiliary hydraulic output.
Engine oil	Not applicable.
Cooling system	Not applicable.

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

VHS-50 fluids & capacities

System	Capacity	Recommended fluid
Engine crankcase, cooling system, fuel tank, transmission/powertrain, final drives, axles/differentials	Not applicable	VHS-50 is a passive hydraulic demolition/scrap shear work tool with no engine, cooling system, fuel tank, transmission, final drives, or axles of its own. It mounts on a carrier excavator, so none of these refill categories apply to the attachment itself.
Hydraulic system (shear opening/closing cylinders)	No dedicated reservoir capacity published for this attachment	The shear runs directly off the carrier machine's auxiliary hydraulic circuit and has no separate tank. Hydraulic fluid type and viscosity follow the host excavator's own OMM recommendation (typically an anti-wear hydraulic oil such as Cat HYDO Advanced, graded to the carrier's climate/viscosity chart), not a VHS-50-specific spec.
Rotation drive gearbox (rotating-shear configuration, if fitted)	Not documented in available VHS-50 literature	Where a rotation motor/gearbox is fitted for 360-degree shear rotation, gear oil grade and fill volume are not published for this model. Verify with the dealer or the carrier-specific attachment manual rather than assuming a sibling shear's figures.
Grease points (blade pivot pin, jaw linkage, rotation bearing)	Spec only, no volume/interval chart published	Apply a general-purpose extreme-pressure chassis grease such as Cat Advanced 3Moly Grease or Cat Extreme Application Grease at the blade pivot, jaw linkage, and rotation bearing until grease purges at the joint. Shorten intervals in wet, muddy, or high-debris demolition environments.

Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.

Caterpillar VHS-50 maintenance schedule

Service interval	Tasks
Every 50 h	Grease the jaw pivot pin and both boom/stick mounting pins until fresh grease purges at each nipple Check cutting blade and insert bolts for torque, retighten any that have backed off Inspect every hydraulic hose, fitting, and swivel running to the shear for leaks, chafing, or kinks Check blade-to-blade clearance and shim if the gap has opened up since the last check Look over the H-link and mounting ears for visible wear, elongation, or cracking Confirm no oil weeping at the closing cylinder rod seal or cylinder glands
Every 250 h	Re-inspect blade edges and inserts, shim or index them if wear has progressed Inspect the closing cylinder for external leakage, rod scoring, or a bent linkage Confirm the carrier excavator's auxiliary hydraulic flow and pressure still match this shear's rated window Check pin retaining hardware (bolts, keeper plates) at every pivot for looseness Inspect welds around the pin bosses, jaw frame, and mounting ears for cracks or grinding marks from a prior repair Clear packed debris and cut material out of the jaw throat and pivot area
Every 500 h	Measure pin-to-bushing play at the jaw pivot and both mounting pins, log the trend against prior readings Check jaw alignment through a full close/open cycle, blades should meet flush with no twist Inspect hoses more closely for soft spots or heat-hardened sections and replace any that show wear Confirm the cylinder holds under load with no visible drift when parked mid-cycle Have welds near the pin bosses and mounting ears re-examined for any crack that has started to spread
Every 1,000 h	Replace any pin or bushing that has reached measurable play rather than waiting for an audible knock Replace or rebuild blade sets and inserts that are chipped or worn past shim range Reseal the closing cylinder if drift or external leakage was found at the 500-hour check Have any crack found near a pin boss or mounting ear weld-repaired per the dealer's structural procedure before returning to service Check the mounting bracket or adapter, on non-Cat carriers, for wear at the coupler interface
Every 2,000 h	Replace pins and bushings as full sets across all pivot points rather than spot-replacing the worst one Reseal or replace the closing cylinder if seal life is nearing its limit Have the jaw frame, gussets, and pin bosses structurally inspected and re-certified by the dealer Rebuild or replace blade sets and inserts as a matched set rather than mixing worn and fresh pieces Recondition frame surfaces after any structural weld work is complete
Every 4,000 h	Treat this as a full structural rebuild: tear down the jaw, cylinder, and pivot assembly completely Replace all wear bushings, pins, and seals regardless of measured play, since cumulative fatigue at the pin bosses is the limiting factor on a shear this age Have the dealer inspect the main frame weldment for fatigue cracking before returning the shear to hard demolition duty Repaint and re-tag the unit after rebuild so hour tracking restarts from a known baseline

Servicing the VHS-50 beyond the schedule

Predictive Maintenance & Fluid Analysis

The VHS-50 has no engine or reservoir of its own, so predictive care means tracking trends, not oil sampling on the shear itself. Log pin-to-bushing play at the jaw pivot and both mounting pins on a set interval; a widening gap or a knock under load flags a joint headed for replacement before it scores the pin bore. Because the shear draws every drop of hydraulic power from the carrier excavator, pull fluid samples from the carrier's own circuit, contamination or moisture there shows up first as cylinder or hose seal wear on the shear.

Corrective & Common Repairs

Blade and insert replacement is the most common corrective job on the VHS-50: once an edge rounds over or a heel plate thins past shim range, swap or hardface it rather than forcing another cycle, since a dull jaw crushes instead of shearing and accelerates wear on the pins and cylinder behind it. Cylinder drift or external leakage traces almost always to worn rod or piston seals, often from carrier pressure set above this shear's rated window, confirm carrier flow and pressure before reseating a cylinder. Inspect welds near the pin bosses and mounting ears at every repair visit.

Overhaul & Rebuild Points

A structural rebuild on the VHS-50 centers on the jaw pivot pin, both mounting pins, and the closing cylinder, the parts carrying full cutting load. Once measured play exceeds shim limits, replace pins and bushings as a matched set rather than one at a time, mismatched wear just accelerates the next failure. Reseal or replace the cylinder on the same cycle if drift or leakage showed up at inspection. Have a dealer inspect and re-certify welds around the pin bosses and mounting ears before returning a rebuilt shear to hard demolition work.

Seasonal & Environment Servicing

Cold weather calls for shorter grease intervals at the jaw pivot and mounting pins; cold grease migrates slowly and leaves a joint under-lubricated if the schedule doesn't tighten up, and a lighter-bodied moly EP grease pushes through the nipple better than standard-bodied grease below freezing. Hoses stiffen and crack more readily on cold starts, so inspect routing and clamps before each cold-season startup. In hot, dusty demolition or scrap-yard settings, grease more often, packed grit turns lubricant into an abrasive paste that wears pins and bushings faster than the standard interval assumes.

VHS-50 attachments & work tools

Shear jaw / cutting head class

VHS-50 is itself a hydraulic scrap/demolition shear head (Verachtert-built, Cat-badged), not a machine that takes attachments — the shear jaw is the work tool. Two generations exist: base VHS-50 (H) from roughly 1996-2005 and the VHS-50/3 update from roughly 2009-2012, with jaw opening and cutting-force figures differing between them (varies by configuration/series).

Carrier / excavator compatibility class

Sized for excavators in roughly the 30-42 t class (base generation) up to roughly 35-60 t (updated /3 generation) — treat as a range and confirm against the exact serial/generation, since the two builds do not share one carrier window.

Mounting and coupler system

Fits via a direct pin-on mount to the excavator stick/dipper, using the standard two-pin plus H-link (rotate-link) arrangement rather than a proprietary quick-coupler. Non-Cat carriers are accommodated through adapter/mounting brackets matched to the host machine's stick and linkage geometry, sized for this weight class.

Hydraulic kit and circuit arrangement

Passive work tool with no engine or power pack of its own — the jaw cylinder runs entirely off the host excavator's dedicated high-pressure attachment (auxiliary) circuit through a pair of high-pressure hose connections. Carrier flow and pressure must match this shear's class; no separate power unit is fitted or required.

Blade and wear-part configuration

Cutting blades are replaceable and can be reversed or flipped to expose a fresh edge before requiring a full change-out. Wear plates and blade sets are periodically re-ground or hardfaced in service rather than swapped as complete jaw assemblies on every job.

Guarding and cylinder protection

The jaw housing shields the main hydraulic cylinder and pivot area from debris and impact during cutting, standard on this class of scrap/demolition shear. No dedicated bolt-on guard kit specific to VHS-50 is documented beyond this integral shielding.

Rotation / positioning configuration

The VHS-50 generations covered here are fixed-jaw units — continuous 360-degree hydraulic rotation is a feature of Caterpillar's later factory S-series shear line that succeeded this family, not a documented factory option on VHS-50 itself. Positioning is set by the excavator stick/H-link geometry at time of pinning.

All VHS-50 assemblies by section

Every catalogued assembly group for the Caterpillar VHS-50. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Frame And Body

242-2063 Cover Gp-Access

16***60	Rotator Group-Hydraulic	1
18***99	Housing Group-Shear	1
21***96	Housing Group-Shear	1
24***63	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

242-9605 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	2
24***05	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

242-9603 Cover Gp-Access

17***96	Housing Group-Shear	1
17***98	Rotator Group-Hydraulic	1
24***03	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

247-8415 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	2
24***15	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

243-1540 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	1
24***40	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

247-8418 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	2
24***18	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

247-8416 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	2
24***16	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

243-1539 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	2
24***39	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

242-3736 Cover Gp-Access

17***10	Rotator Group-Hydraulic	1
19***87	Housing Group-Shear	1
21***50	Housing Group-Shear	1
21***49	Rotator Group-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

247-8417 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	2
24***17	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

242-2062 Cover Gp-Access

16***60	Rotator Group-Hydraulic	1
17***55	Housing Group-Shear	1
21***97	Housing Group-Shear	1
24***62	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

242-9604 Cover Gp-Access

11***73	Seal; (0.5cm) (X2)	0
24***58	Latch Group-Access Door	1
24***04	Cover Group-Access	1

See all parts with full part numbers in Heavy Parts AI →

227-4318 Guide Gp-Lines

11***73	Seal; (0.5cm) (X2)	0
22***18	Guide Group-Lines	1
24***58	Latch Group-Access Door	1

See all parts with full part numbers in Heavy Parts AI →

217-1398 Housing Gp-Shear

09***07	Bolt; (M16x2x120-mm)	8
10***40	Plug	1
11***73	Seal; (0.5cm) (X2)	0
14***92	Elbow; (-12 Orfs/-12 Orfs Swivel)	2

See all parts with full part numbers in Heavy Parts AI →

217-1397 Housing Gp-Shear

14***52	Elbow As.	2
15***19	Lockwasher	10
15***21	Lockwasher	18
16***81	Seal	1

See all parts with full part numbers in Heavy Parts AI →

245-8016 Housing Gp-Shear

10***40	Plug	1
11***73	Seal; (0.5cm) (X2)	0
14***92	Elbow; (-12 Orfs/-12 Orfs Swivel)	2
15***46	Seal	1

See all parts with full part numbers in Heavy Parts AI →

235-0577 Housing Gp-Shear

09***07	Bolt; (M16x2x120-mm)	8
10***40	Plug	1
14***92	Elbow; (-12 Orfs/-12 Orfs Swivel)	2
15***46	Seal	1

See all parts with full part numbers in Heavy Parts AI →

195-0777 Housing Gp-Shear

19***77	Housing Group-Shear	1
22***15	Plate As	1
6V***89	Locknut; (M8x1.25-Thd)	1
7X***03	Washer-Hard; (9.9x35x2.5-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

171-5496 Housing Gp-Shear

11***73	Seal; (0.5cm) (X2)	0
17***96	Housing Group-Shear	1
24***58	Latch Group-Access Door	2

See all parts with full part numbers in Heavy Parts AI →

197-7187 Housing Gp-Shear

10***40	Plug	1
15***46	Seal	1
15***18	Lockwasher	8
15***19	Lockwasher	32

See all parts with full part numbers in Heavy Parts AI →

318-9773 Housing Gp-Shear

11***73	Seal; (0.5cm) (X2)	0
14***78	Lockwasher	24
15***19	Lockwasher	2
15***21	Lockwasher	24

See all parts with full part numbers in Heavy Parts AI →

216-6850 Housing Gp-Shear

09***07	Bolt; (M16x2x120-mm)	8
10***40	Plug	1
15***46	Seal	1
15***18	Lockwasher	8

See all parts with full part numbers in Heavy Parts AI →

177-3355 Housing Gp-Shear

11***73	Seal; (0.5cm) (X2)	0
17***55	Housing Group-Shear	1
24***58	Latch Group-Access Door	2

See all parts with full part numbers in Heavy Parts AI →

245-8017 Housing Gp-Shear

10***40	Plug	1
14***92	Elbow; (-12 Orfs/-12 Orfs Swivel)	2
15***46	Seal	1
15***18	Lockwasher	8

See all parts with full part numbers in Heavy Parts AI →

196-2019 Housing Gp-Shear

08***10	Setscrew; (M10x21-mm)	6
10***88	Bolt-Socket Head; (M10x1.5x16-mm)	3
15***18	Lockwasher	6
16***58	Bushing; (50mm)	2

See all parts with full part numbers in Heavy Parts AI →

217-1396 Housing Gp-Shear

14***78	Lockwasher	24
15***21	Lockwasher	24
16***64	Bolt-Socket Head; (M20x2.5x55-mm)	24
17***14	Flange	2

See all parts with full part numbers in Heavy Parts AI →

318-9776 Housing Gp-Shear

14***78	Lockwasher	24
15***19	Lockwasher	2
15***21	Lockwasher	24
16***12	Clip; (Slot)	2

See all parts with full part numbers in Heavy Parts AI →

318-9778 Housing Gp-Shear

14***52	Elbow As.	2
15***19	Lockwasher	10
15***21	Lockwasher	18
16***81	Seal	1

See all parts with full part numbers in Heavy Parts AI →

184-3399 Housing Gp-Shear

11***73	Seal; (0.5cm) (X2)	0
18***99	Housing Group-Shear	1
24***58	Latch Group-Access Door	1

See all parts with full part numbers in Heavy Parts AI →

217-1395 Housing Gp-Shear

14***52	Elbow As.	2
15***19	Lockwasher	46
15***21	Lockwasher	18
16***81	Seal	1

See all parts with full part numbers in Heavy Parts AI →

242-2058 Latch Gp-Access Door

15***19	Lockwasher	2
15***21	Lockwasher	34
16***12	Clip; (Slot)	2
16***13	Clip; (Tab)	2

See all parts with full part numbers in Heavy Parts AI →

171-5558 Mounting Gp-Shear

14***52	Elbow As.	2
15***19	Lockwasher	2
15***21	Lockwasher	18
16***81	Seal	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic System

222-8830 Cylinder & Lines Gp-Shear

16***16	Seal	1
17***21	Adapter As	1
18***78	Cylinder Group-Shear	1
18***84	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

187-2962 Cylinder & Lines Gp-Shear

17***35	Mounting Group-Cylinder	1
17***49	Lines Group-Cylinder	1
17***54	Cylinder & Lines Group-Shear	1
18***62	Cylinder & Lines Group-Shear	1

See all parts with full part numbers in Heavy Parts AI →

171-5554 Cylinder & Lines Gp-Shear

09***69	Bolt	24
14***92	Elbow; (-12 Orfs/-12 Orfs Swivel)	2
15***46	Seal	1
15***18	Lockwasher	8

See all parts with full part numbers in Heavy Parts AI →

187-2996 Cylinder & Lines Gp-Shear

16***16	Seal	1
17***21	Adapter As	1
17***60	Cylinder Group-Shear	1
17***31	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

177-3369 Cylinder & Lines Gp-Shear

10***86	Spring	1
17***69	Cylinder & Lines Group-Shear	1
24***59	Latch	1
24***60	Bolt-Socket Head; (M16x2-Thd)	1

See all parts with full part numbers in Heavy Parts AI →

222-8828 Cylinder & Lines Gp-Shear

09***70	Bolt-Socket Hd; (M12 X 1.75 X 45)	8
16***16	Seal	1
17***21	Adapter As	1
18***05	Cylinder Group-Shear	1

See all parts with full part numbers in Heavy Parts AI →

196-2026 Cylinder & Lines Gp-Shear

12***11	Hose As	1
16***54	Seal	1
16***16	Seal	1
17***21	Adapter As	1

See all parts with full part numbers in Heavy Parts AI →

171-5497 Cylinder & Lines Gp-Shear

09***69	Bolt	24
14***92	Elbow; (-12 Orfs/-12 Orfs Swivel)	2
15***46	Seal	1
15***18	Lockwasher	8

See all parts with full part numbers in Heavy Parts AI →

184-3404 Cylinder & Lines Gp-Shear

18***04	Cylinder & Lines Group-Shear	1
28***28	Bracket As	1
7X***62	Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8)	6
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	6

See all parts with full part numbers in Heavy Parts AI →

196-2022 Cylinder & Valve Gp

14***78	Lockwasher	1
15***18	Lockwasher	2
16***54	Seal	1
16***16	Seal	1

See all parts with full part numbers in Heavy Parts AI →

184-3403 Cylinder & Valve Gp

09***70	Bolt-Socket Hd; (M12 X 1.75 X 45)	8
16***16	Seal	1
17***21	Adapter As	1
18***03	Cylinder & Valve Group	1

See all parts with full part numbers in Heavy Parts AI →

187-2993 Cylinder & Valve Gp

14***78	Lockwasher	1
14***51	Elbow Group	1
15***18	Lockwasher	2
16***54	Seal	1

See all parts with full part numbers in Heavy Parts AI →

177-3360 Cylinder & Valve Gp

12***22	Bolt; (M14x2x50-mm)	8
16***16	Seal	1
17***21	Adapter As	1
17***60	Cylinder & Valve Group	1

See all parts with full part numbers in Heavy Parts AI →

187-2945 Cylinder & Valve Gp

14***78	Lockwasher	1
14***51	Elbow Group	1
15***18	Lockwasher	2
16***54	Seal	1

See all parts with full part numbers in Heavy Parts AI →

171-5560 Cylinder Gp-Shear

14***78	Lockwasher	1
14***51	Elbow Group	1
15***18	Lockwasher	2
16***54	Seal	1

See all parts with full part numbers in Heavy Parts AI →

177-3368 Cylinder Gp-Shear

14***78	Lockwasher	1
14***51	Elbow Group	1
15***19	Lockwasher	2
16***54	Seal	1

See all parts with full part numbers in Heavy Parts AI →

196-2030 Cylinder Gp-Shear

16***16	Seal	1
16***03	Bushing	2
17***23	Plug As	2
17***45	Stop	1

See all parts with full part numbers in Heavy Parts AI →

184-3405 Cylinder Gp-Shear

14***06	Bolt-Socket Head; (M20x2.5x140-mm)	5
14***78	Lockwasher	1
14***51	Elbow Group	1
15***19	Lockwasher	2

See all parts with full part numbers in Heavy Parts AI →

187-2978 Cylinder Gp-Shear

16***16	Seal	1
16***03	Bushing	2
17***23	Plug As	2
17***45	Stop	1

See all parts with full part numbers in Heavy Parts AI →

201-7607 Lines Gp-Connecting

09***48	Nipple, Grease	1
14***84	Bolt-Socket Head; (M20x2.5x110-mm)	22
16***16	Seal	1
16***55	Bushing	2

See all parts with full part numbers in Heavy Parts AI →

242-1184 Lines Gp-Connecting

09***48	Nipple, Grease	1
09***06	Bolt-Socket Head; (M16x2x80-mm)	24
16***16	Seal	1
16***71	Bushing	2

See all parts with full part numbers in Heavy Parts AI →

225-2729 Lines Gp-Connecting

09***48	Nipple, Grease	1
16***16	Seal	1
17***23	Plug As	4
17***23	Bushing	2

See all parts with full part numbers in Heavy Parts AI →

197-6880 Lines Gp-Connecting

09***48	Nipple, Grease	1
16***16	Seal	1
16***41	Bushing	2
17***23	Plug As	4

See all parts with full part numbers in Heavy Parts AI →

241-5636 Lines Gp-Connecting

09***48	Nipple, Grease	1
16***16	Seal	1
16***87	Bushing	2
17***50	Pin-Spring	1

See all parts with full part numbers in Heavy Parts AI →

171-5565 Lines Gp-Connecting

09***48	Nipple, Grease	1
16***16	Seal	1
16***87	Bushing	2
17***50	Pin-Spring	1

See all parts with full part numbers in Heavy Parts AI →

177-5026 Lines Gp-Connecting

09***48	Nipple, Grease	1
09***06	Bolt-Socket Head; (M16x2x80-mm)	24
16***16	Seal	1
16***71	Bushing	2

See all parts with full part numbers in Heavy Parts AI →

291-1280 Lines Gp-Connecting

12***40	Fitting As-Hydraulic; (Quick Disconnect, Male)	2
17***33	Hose As	2
29***80	Lines Group-Connecting	1
6V***98	Seal-O-Ring -Line From Gear Pump Output	4

See all parts with full part numbers in Heavy Parts AI →

318-4547 Lines Gp-Connecting

16***46	Bar-Clamp	2
16***90	Clip; (Slot)	2
16***91	Clip; (Tab)	2
1P***04	Seal - Rectangular (45mm Dia)	4

See all parts with full part numbers in Heavy Parts AI →

292-1512 Lines Gp-Connecting

19***69	Hose As	2
1P***05	Seal (Check Valve Outlet)	4
29***12	Lines Group-Connecting	1
5T***22	Hose As	2

See all parts with full part numbers in Heavy Parts AI →

242-1185 Lines Gp-Connecting

14***40	Adapter; (Straight) (-8 Orb X -8 Orfs)	2
14***70	Elbow, 90°,-8 Orb Swiv. /-8 Orfs	2
14***18	Reducer; (-8orfs/-12orfs Swivel)	2
15***94	Coupler As-Quick Disconnect; (Female)(Quick Disconnect)	1

See all parts with full part numbers in Heavy Parts AI →

171-5549 Lines Gp-Cylinder

17***49	Lines Group-Cylinder	1
24***84	Lines Group-Connecting	1
24***85	Lines Group-Connecting	1

See all parts with full part numbers in Heavy Parts AI →

170-2174 Manifold Gp-Control

17***74	Manifold Group-Control	1
24***38	Hose As	2
6V***98	Seal-O-Ring -Line From Gear Pump Output	2
6V***57	Nut-Face Seal; (1-7/16-12-Thd)	2

See all parts with full part numbers in Heavy Parts AI →

170-2172 Motor & Manifold Gp-Rotator

16***43	Seal	1
17***72	Motor & Manifold Group-Rotator	1
17***05	Adapter As	2
24***86	Hose As	2

See all parts with full part numbers in Heavy Parts AI →

320-1326 Motor Gp-Gerotor

29***43	Hose As	2
29***45	Hose As	2
32***26	Motor Group-Gerotor	1

See all parts with full part numbers in Heavy Parts AI →

216-7650 Motor Gp-Gerotor

1P***04	Seal - Rectangular (45mm Dia)	1
1P***67	Flange-Half (43.31 mm Id)	2
21***50	Motor Group-Gerotor	1
29***59	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

170-2173 Motor Gp-Gerotor

10***36	Connector	2
10***37	Seal	1
15***94	Adapter As	2
15***44	Seal	1

See all parts with full part numbers in Heavy Parts AI →

171-5535 Mounting Gp-Cylinder

17***35	Mounting Group-Cylinder	1
32***36	Hose As	2
32***37	Hose As	2
5K***90	Seal-To Hydraulic Cooler Inlet Port	4

See all parts with full part numbers in Heavy Parts AI →

171-5498 Rotator Gp-Hydraulic

14***20	Bolt-Socket Head; (M6x1x75-mm)	4
17***98	Rotator Group-Hydraulic	1
7Y***19	Seal-O-Ring (Id=12.37mm)	2

See all parts with full part numbers in Heavy Parts AI →

319-2124 Rotator Gp-Hydraulic

03***43	Seal-O-Ring	1
09***48	Nipple, Grease	1
14***70	Elbow, 90°,-8 Orb Swiv. /-8 Orfs	2
15***94	Adapter As	6

See all parts with full part numbers in Heavy Parts AI →

216-7649 Rotator Gp-Hydraulic

03***43	Seal-O-Ring	1
08***09	Spacer; (16.6x32x8.5-mm Thk)	34
12***28	Adaptor - Includes:-	2
15***94	Adapter As	6

See all parts with full part numbers in Heavy Parts AI →

217-1423 Rotator Gp-Hydraulic

15***94	Adapter As	2
15***44	Seal	1
15***46	Seal	1
16***99	Adapter As	2

See all parts with full part numbers in Heavy Parts AI →

171-5555 Rotator Gp-Hydraulic

17***73	Motor Group-Gerotor	1
17***74	Manifold Group-Control	1
17***76	Ring-Mounting	1
17***77	Gear-Drive; (15-Teeth)	1

See all parts with full part numbers in Heavy Parts AI →

194-6068 Rotator Gp-Hydraulic

17***73	Motor Group-Gerotor	1
17***74	Manifold Group-Control	1
17***77	Gear-Drive; (15-Teeth)	1
19***68	Rotator Group-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

171-7526 Rotator Gp-Hydraulic

17***21	Kit-Housing	1
17***22	Shaft-Output	1
17***25	Key-Square	1
17***26	Rotator Group-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

169-6060 Rotator Gp-Hydraulic

15***35	Elbow As	4
15***18	Lockwasher	2
15***19	Lockwasher	1
16***79	Adapter	4

See all parts with full part numbers in Heavy Parts AI →

171-8110 Rotator Gp-Hydraulic

17***73	Motor Group-Gerotor	1
17***76	Ring-Mounting	1
17***77	Gear-Drive; (15-Teeth)	1
17***10	Rotator Group-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

319-2123 Rotator Gp-Hydraulic

09***07	Nut; (M12x1.75-Thd)	4
14***53	Plug	1
18***82	Bolt-Socket Head; (M20x2.5x65-mm)	16
18***16	Pin-Spring	2

See all parts with full part numbers in Heavy Parts AI →

170-3045 Swivel Gp

09***73	Bolt; (Socket Head) (M12x1.75x60mm)	16
12***28	Adaptor - Includes:-	4
14***70	Elbow, 90°,-8 Orb Swiv. /-8 Orfs	4
14***44	Tee Group; (Swivel)	2

See all parts with full part numbers in Heavy Parts AI →

172-1124 Swivel Gp

09***73	Bolt; (Socket Head) (M12x1.75x60mm)	8
12***28	Adaptor - Includes:-	4
14***70	Elbow, 90°,-8 Orb Swiv. /-8 Orfs	4
14***44	Tee Group; (Swivel)	2

See all parts with full part numbers in Heavy Parts AI →

265-6468 Swivel Gp

09***73	Bolt; (Socket Head) (M12x1.75x60mm)	16
12***28	Adaptor - Includes:-	4
12***24	Seal-O-Ring; (12.37mm Id)	4
14***73	Lockwasher	8

See all parts with full part numbers in Heavy Parts AI →

208-8451 Valve Gp-Control

08***72	Seal-O-Ring	1
14***70	Elbow, 90°,-8 Orb Swiv. /-8 Orfs	2
15***94	Adapter As	6
15***95	Adapter As	4

See all parts with full part numbers in Heavy Parts AI →

174-4901 Valve Gp-Control -Quick

09***73	Bolt; (Socket Head) (M12x1.75x60mm)	8
12***28	Adaptor - Includes:-	4
12***24	Seal-O-Ring; (12.37mm Id)	4
14***73	Lockwasher	8

See all parts with full part numbers in Heavy Parts AI →

170-3229 Valve Gp-Speed Control

08***72	Seal-O-Ring	1
14***70	Elbow, 90°,-8 Orb Swiv. /-8 Orfs	2
15***94	Adapter As	6
15***95	Adapter As	2

See all parts with full part numbers in Heavy Parts AI →

172-2207 Valve Gp-Speed Control

16***43	Seal	1
17***41	Stator	1
17***42	Rotor	1
17***43	Ring	1

See all parts with full part numbers in Heavy Parts AI →

208-5125 Valve Gp-Speed Control

16***43	Seal	1
17***57	Plug As	4
17***14	Stator	1
17***15	Rotor	1

See all parts with full part numbers in Heavy Parts AI →

Service Equipment And Supplies

197-3519 Film Gp

13***54	Plug As	3
19***19	Film Group	1
20***87	Slack Adjuster Group	1
20***88	Valve Group-Control	1

See all parts with full part numbers in Heavy Parts AI →

195-0776 Film Gp

16***80	Kit-Service; (Counterbalance Valve)	2
18***01	Manifold	1
18***02	Valve	1
18***03	Valve	1

See all parts with full part numbers in Heavy Parts AI →

200-2135 Film Gp

09***01	Bolt-Socket Head; (M8x1.25x40-mm)	4
17***55	Seal-O-Ring	2
20***35	Film Group	1
20***74	Bolt-Socket Head; (M16x2x55-mm)	8

See all parts with full part numbers in Heavy Parts AI →

200-8571 Film Gp

14***36	Film-Warning; (Flying Debris)	2
14***69	Film-Warning; (Alert)	2
14***70	Film-Warning; (Read Omm)	2
15***96	Film-Notice; (Lift Eye Location)	5

See all parts with full part numbers in Heavy Parts AI →

197-7184 Film Gp

17***30	Plug	6
17***31	Valve	1
17***32	Plug-Screw	2
17***33	Valve-Relief	1

See all parts with full part numbers in Heavy Parts AI →

197-3843 Film Gp

17***30	Plug	6
17***31	Valve	1
17***32	Plug-Screw	2
17***33	Valve-Relief	1

See all parts with full part numbers in Heavy Parts AI →

235-2730 Kit-Maintenance

14***86	Fitting As	2
15***44	Seal	1
16***74	Shim; (0.5-mm Thk)	10
16***75	Shim; (1-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

177-3356 Kit-Maintenance

14***36	Film-Warning; (Flying Debris)	2
14***69	Film-Warning; (Alert)	2
14***70	Film-Warning; (Read Omm)	2
15***96	Film-Notice; (Lift Eye Location)	5

See all parts with full part numbers in Heavy Parts AI →

183-5625 Kit-Maintenance

14***36	Film-Warning; (Flying Debris)	2
14***69	Film-Warning; (Alert)	2
14***70	Film-Warning; (Read Omm)	2
15***96	Film-Notice; (Lift Eye Location)	5

See all parts with full part numbers in Heavy Parts AI →

184-3400 Kit-Maintenance

14***36	Film-Warning; (Flying Debris)	2
15***96	Film-Notice; (Lift Eye Location)	5
15***35	Film-Warning; (Crush Hazard, Stay Back)	2
15***36	Film-Warning; (Read Operation Manual)	2

See all parts with full part numbers in Heavy Parts AI →

195-0775 Kit-Maintenance

14***08	Fitting	2
14***86	Fitting As	2
15***44	Seal	1
16***86	Shim; (1-mm Thk)	8

See all parts with full part numbers in Heavy Parts AI →

197-7186 Kit-Maintenance

14***08	Fitting	2
14***86	Fitting As	2
15***44	Seal	1
16***86	Shim; (1-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

200-2134 Kit-Maintenance

14***74	Fitting As	2
14***86	Fitting As	2
15***44	Seal	1
16***86	Shim; (1-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

235-0605 Kit-Maintenance

14***74	Fitting As	2
14***86	Fitting As	2
15***44	Seal	1
16***86	Shim; (1-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

235-2732 Kit-Maintenance

14***86	Fitting As	2
15***44	Seal	1
16***74	Shim; (0.5-mm Thk)	10
16***75	Shim; (1-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

200-2885 Lock Gp-Shear

14***86	Fitting As	2
15***44	Seal	1
17***03	Wrench-T-Handle	1
17***77	Fitting As; (Quick Disconnect, Male)	4

See all parts with full part numbers in Heavy Parts AI →

200-2959 Lock Gp-Shear

14***86	Fitting As	2
15***44	Seal	1
17***03	Wrench-T-Handle	1
17***77	Fitting As; (Quick Disconnect, Male)	4

See all parts with full part numbers in Heavy Parts AI →

199-8486 Lock Gp-Shear

14***86	Fitting As	2
15***44	Seal	1
17***03	Wrench-T-Handle	1
17***77	Fitting As; (Quick Disconnect, Male)	4

See all parts with full part numbers in Heavy Parts AI →

200-2961 Lock Gp-Shear

14***86	Fitting As	2
15***44	Seal	1
16***92	Wrench	1
17***03	Wrench-T-Handle	1

See all parts with full part numbers in Heavy Parts AI →

200-2960 Lock Gp-Shear

14***74	Fitting As	2
14***86	Fitting As	2
15***44	Seal	1
16***92	Wrench	1

See all parts with full part numbers in Heavy Parts AI →

200-2962 Lock Gp-Shear

20***62

Lock Group-Shear

See all parts with full part numbers in Heavy Parts AI →

Work Tool Arrangement

197-7182 Shear Ar-Hydraulic

19***82	Shear Ar-Hydraulic	1
19***84	Film Group	1
19***85	Shear Group-Hydraulic	1
19***86	Kit-Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

195-0772 Shear Ar-Hydraulic

19***72	Shear Ar-Hydraulic	1
19***74	Shear Group-Hydraulic	1
19***75	Kit-Maintenance	1
19***76	Film Group	1

See all parts with full part numbers in Heavy Parts AI →

200-8570 Shear Ar-Hydraulic

18***25	Kit-Maintenance	1
19***30	Shear Group-Hydraulic	1
20***70	Shear Ar-Hydraulic	1
20***71	Film Group	1

See all parts with full part numbers in Heavy Parts AI →

197-3842 Shear Ar-Hydraulic

18***00	Kit-Maintenance	1
19***42	Shear Ar-Hydraulic	1
19***43	Film Group	1
19***44	Shear Group-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

197-3518 Shear Ar-Hydraulic

17***56	Kit-Maintenance	1
19***18	Shear Ar-Hydraulic	1
19***19	Film Group	1
19***20	Shear Group-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

200-2133 Shear Ar-Hydraulic

19***17	Shear Group-Hydraulic	1
20***33	Shear Ar-Hydraulic	1
20***34	Kit-Maintenance	1
20***35	Film Group	1

See all parts with full part numbers in Heavy Parts AI →

Work Tools

198-7615 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
19***15	Bracket Group-Mounting	1
19***16	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

179-1646 Bracket Gp-Mounting

15***18	Lockwasher	8
16***97	Plate-Cover	1
17***45	Bracket As	1
17***46	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

202-0286 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	48
20***85	Bracket Group-Mounting	1
20***86	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	48

See all parts with full part numbers in Heavy Parts AI →

179-1647 Bracket Gp-Mounting

15***18	Lockwasher	8
16***19	Bracket As	1
16***97	Plate-Cover	1
17***47	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

291-1291 Bracket Gp-Mounting

15***19	Lockwasher	8
16***95	Seal; (Id=93.00mm)	2
22***89	Bearing-Sleeve	2
29***91	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

224-2478 Bracket Gp-Mounting

22***78	Bracket Group-Mounting	1
24***32	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

257-0099 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
25***99	Bracket Group-Mounting	1
25***02	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

169-5311 Bracket Gp-Mounting

16***11	Bracket Group-Mounting	1
16***16	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

200-7810 Bracket Gp-Mounting

09***34	Shim; (T=69.85mm)	2
11***82	Bearing-Sleeve	2
15***19	Lockwasher	16
18***74	Cover	2

See all parts with full part numbers in Heavy Parts AI →

254-4463 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***71	Washer; (26x90x8-mm Thk)	2
25***63	Bracket Group-Mounting	1
25***02	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

257-0101 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
25***01	Bracket Group-Mounting	1
25***03	Bracket As-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

224-2477 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
22***77	Bracket Group-Mounting	1
22***79	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

197-7840 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
19***39	Bracket As	1
19***40	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

222-8506 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
22***06	Bracket Group-Mounting	1
22***12	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

247-0536 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
15***21	Lockwasher	2
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***59	Plate-Serial Number	1

See all parts with full part numbers in Heavy Parts AI →

257-1047 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
25***47	Bracket Group-Mounting	1
27***38	Bracket As	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

254-4039 Bracket Gp-Mounting

09***49	Washer; (22x60x6-mm Thk)	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***71	Washer; (26x90x8-mm Thk)	1
25***39	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

200-7809 Bracket Gp-Mounting

14***90	Bearing-Sleeve; (140.26mm Od)	2
15***19	Lockwasher	16
17***61	Cover	2
20***09	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

169-4976 Bracket Gp-Mounting

16***76	Bracket Group-Mounting	1
16***96	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***53	Bolt-Plt; (M16 X 2.0 X 40)	1

See all parts with full part numbers in Heavy Parts AI →

169-5312 Bracket Gp-Mounting

16***12	Bracket Group-Mounting	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
17***54	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

193-9094 Bracket Gp-Mounting

15***19	Lockwasher	16
17***61	Cover	2
19***94	Bracket Group-Mounting	1
19***95	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

217-0996 Bracket Gp-Mounting

15***19	Lockwasher	18
17***61	Cover	2
21***96	Bracket Group-Mounting	1
5W***17	Fitting-Grease	1

See all parts with full part numbers in Heavy Parts AI →

205-3920 Bracket Gp-Mounting

20***20	Bracket Group-Mounting	1
20***70	Bracket As	1
7X***62	Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8)	6
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	6

See all parts with full part numbers in Heavy Parts AI →

169-4974 Bracket Gp-Mounting

16***74	Bracket Group-Mounting	1
16***93	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***53	Bolt-Plt; (M16 X 2.0 X 40)	2

See all parts with full part numbers in Heavy Parts AI →

169-4971 Bracket Gp-Mounting

16***71	Bracket Group-Mounting	1
16***91	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***53	Bolt-Plt; (M16 X 2.0 X 40)	2

See all parts with full part numbers in Heavy Parts AI →

222-8507 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
22***07	Bracket Group-Mounting	1
22***13	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

175-3012 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
17***12	Bracket Group-Mounting	1
17***53	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

201-9466 Bracket Gp-Mounting

15***18	Lockwasher	8
16***97	Plate-Cover	1
20***66	Bracket Group-Mounting	1
20***31	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

200-7806 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
20***06	Bracket Group-Mounting	1
20***12	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

201-5014 Bracket Gp-Mounting

09***54	Seal; (Id=79.85mm)	2
15***19	Lockwasher	16
18***74	Cover	2
20***12	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

179-1645 Bracket Gp-Mounting

15***18	Lockwasher	8
16***18	Bracket As	1
16***97	Plate-Cover	1
17***45	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

201-5016 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***14	Bracket Group-Mounting	1
20***16	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

201-5015 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***13	Bracket Group-Mounting	1
20***15	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

200-7808 Bracket Gp-Mounting

13***17	Bearing-Sleeve; (116.23mm Od)	2
15***19	Lockwasher	16
16***96	Seal; (Id=99.85mm)	2
18***74	Cover	2

See all parts with full part numbers in Heavy Parts AI →

193-4497 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
19***97	Bracket Group-Mounting	1
20***66	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

283-4828 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
15***19	Lockwasher	16
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
18***74	Cover	2

See all parts with full part numbers in Heavy Parts AI →

336-0800 Bracket Gp-Mounting

14***87	Screw-Flat Head	2
14***75	Bolt; (M20x2.5x75-Thd)	6
16***85	Edge-Cutting	4
16***86	Shim; (1-mm Thk)	12

See all parts with full part numbers in Heavy Parts AI →

276-7982 Bracket Gp-Mounting

15***97	Seal-Lip Type	2
19***46	Insert	1
26***24	Bearing-Sleeve	2
27***82	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

169-4980 Bracket Gp-Mounting

16***80	Bracket Group-Mounting	1
16***98	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***52	Bolt-Plt; (M16 X 2.0 X 30)	2

See all parts with full part numbers in Heavy Parts AI →

179-1651 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
17***18	Bracket As	1
17***51	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

199-1258 Bracket Gp-Mounting

13***17	Bearing-Sleeve; (116.23mm Od)	2
15***19	Lockwasher	16
17***61	Cover	2
19***57	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

222-3345 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	16
22***45	Bracket Group-Mounting	1
22***11	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	16

See all parts with full part numbers in Heavy Parts AI →

179-1654 Bracket Gp-Mounting

15***18	Lockwasher	8
16***15	Bracket As	1
16***97	Plate-Cover	1
17***54	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

200-7804 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***04	Bracket Group-Mounting	1
20***10	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

198-7616 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
19***13	Bracket As	1
19***16	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

222-8512 Bracket Gp-Mounting

14***90	Bearing-Sleeve; (140.26mm Od)	2
15***19	Lockwasher	16
17***61	Cover	2
22***12	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

175-0342 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
17***42	Bracket Group-Mounting	1
17***49	Bracket As	1
7X***52	Bolt-Plt; (M16 X 2.0 X 30)	2

See all parts with full part numbers in Heavy Parts AI →

169-4967 Bracket Gp-Mounting

16***67	Bracket Group-Mounting	1
16***86	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
5P***76	Washer Guard To Support Assembly And Guard Assembly	2

See all parts with full part numbers in Heavy Parts AI →

199-0719 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	16
19***40	Bracket Group-Mounting	1
19***19	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	16

See all parts with full part numbers in Heavy Parts AI →

200-7803 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
20***03	Bracket Group-Mounting	1
20***09	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

202-0285 Bracket Gp-Mounting

17***61	Cover	2
20***84	Bracket As	1
20***85	Bracket Group-Mounting	1
5W***17	Fitting-Grease	1

See all parts with full part numbers in Heavy Parts AI →

283-4827 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
23***25	Plate-Serial Number	1
28***27	Bracket Group-Mounting	2
7X***62	Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8)	6

See all parts with full part numbers in Heavy Parts AI →

222-8511 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
22***11	Bracket Group-Mounting	1
22***17	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

257-0102 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
25***02	Bracket Group-Mounting	1
25***47	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

169-4981 Bracket Gp-Mounting

16***81	Bracket Group-Mounting	1
16***99	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***53	Bolt-Plt; (M16 X 2.0 X 40)	1

See all parts with full part numbers in Heavy Parts AI →

169-5307 Bracket Gp-Mounting

16***07	Bracket Group-Mounting	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
17***47	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

200-7506 Bracket Gp-Mounting

15***18	Lockwasher	8
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
16***97	Plate-Cover	1
20***06	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

201-5013 Bracket Gp-Mounting

09***54	Seal; (Id=79.85mm)	2
15***19	Lockwasher	16
18***74	Cover	2
20***11	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

249-3132 Bracket Gp-Mounting

09***49	Washer; (22x60x6-mm Thk)	2
13***55	Setscrew; (M4x0.7x8-mm)	2
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***59	Plate-Serial Number	1

See all parts with full part numbers in Heavy Parts AI →

169-4978 Bracket Gp-Mounting

16***78	Bracket Group-Mounting	1
16***97	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***53	Bolt-Plt; (M16 X 2.0 X 40)	1

See all parts with full part numbers in Heavy Parts AI →

169-4970 Bracket Gp-Mounting

16***70	Bracket Group-Mounting	1
16***90	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7Y***10	Washer-Special; (17x65x6-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

291-1266 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
29***66	Bracket Group-Mounting	1
29***97	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

180-1286 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
18***86	Bracket Group-Mounting	1
19***94	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

197-5352 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	48
19***52	Bracket Group-Mounting	1
19***53	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	48

See all parts with full part numbers in Heavy Parts AI →

222-8508 Bracket Gp-Mounting

13***17	Bearing-Sleeve; (116.23mm Od)	2
15***19	Lockwasher	16
18***74	Cover	2
22***08	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

283-4187 Bracket Gp-Mounting

15***97	Seal-Lip Type	2
19***46	Insert	1
26***24	Bearing-Sleeve	2
28***87	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

199-7008 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
19***07	Bracket Group-Mounting	1
19***08	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

246-9991 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
24***91	Bracket Group-Mounting	1
8T***36	Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9)	6

See all parts with full part numbers in Heavy Parts AI →

169-4968 Bracket Gp-Mounting

16***68	Bracket Group-Mounting	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
23***05	Bracket As	1
7Y***10	Washer-Special; (17x65x6-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

169-4969 Bracket Gp-Mounting

16***69	Bracket Group-Mounting	1
16***89	Bracket As	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
7X***53	Bolt-Plt; (M16 X 2.0 X 40)	2

See all parts with full part numbers in Heavy Parts AI →

199-7007 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
19***06	Bracket As	1
19***07	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

200-7800 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***00	Bracket Group-Mounting	1
20***06	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

200-7805 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***05	Bracket Group-Mounting	1
20***11	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

283-4186 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
28***86	Bracket Group-Mounting	2
7X***62	Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8)	6
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	6

See all parts with full part numbers in Heavy Parts AI →

205-3923 Bracket Gp-Mounting

20***23	Bracket Group-Mounting	1
20***46	Bracket As	1
7X***62	Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8)	6
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	6

See all parts with full part numbers in Heavy Parts AI →

245-8009 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
20***59	Plate-Serial Number	1
24***09	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

200-7807 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
20***07	Bracket Group-Mounting	1
20***13	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

200-7801 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***01	Bracket Group-Mounting	1
20***07	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

257-1041 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
25***41	Bracket Group-Mounting	1
25***48	Bracket As-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

287-6820 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
28***20	Bracket Group-Mounting	1
29***75	Bracket Group-Mounting	1
6V***37	Plain Washer - Hardened	14

See all parts with full part numbers in Heavy Parts AI →

291-4097 Bracket Gp-Mounting

15***19	Lockwasher	8
29***97	Bracket Group-Mounting	1
29***22	Bracket As	1
29***32	Cover	2

See all parts with full part numbers in Heavy Parts AI →

291-5775 Bracket Gp-Mounting

13***55	Setscrew; (M4x0.7x8-mm)	2
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
29***75	Bracket Group-Mounting	1
33***01	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

175-0338 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
17***38	Bracket Group-Mounting	1
17***46	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

175-3014 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
17***14	Bracket Group-Mounting	1
17***51	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

199-1259 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
19***58	Bracket Group-Mounting	1
19***59	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

179-1653 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
17***16	Bracket As	1
17***53	Bracket Group-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

275-8137 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
27***37	Bracket Group-Mounting	1
27***77	Bracket As	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

248-7980 Bracket Gp-Mounting

15***19	Lockwasher	16
18***74	Cover	2
24***80	Bracket Group-Mounting	1
24***33	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

200-7802 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***02	Bracket Group-Mounting	1
20***08	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

222-8513 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
22***13	Bracket Group-Mounting	1
22***78	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

299-0293 Bracket Gp-Mounting

17***09	Edge-Cutting	2
17***10	Edge-Cutting	2
17***11	Cutter	1
17***12	Shim; (1-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

253-7830 Bracket Gp-Mounting

09***49	Washer; (22x60x6-mm Thk)	1
13***55	Setscrew; (M4x0.7x8-mm)	2
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
20***71	Washer; (26x90x8-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

175-0341 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
17***41	Bracket Group-Mounting	1
17***48	Bracket As	1
7X***52	Bolt-Plt; (M16 X 2.0 X 30)	2

See all parts with full part numbers in Heavy Parts AI →

275-9776 Bracket Gp-Mounting

16***82	Bolt-Socket Head; (M24x3x70-mm)	14
27***76	Bracket Group-Mounting	1
27***83	Bracket As	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

200-7811 Bracket Gp-Mounting

09***34	Shim; (T=69.85mm)	2
11***82	Bearing-Sleeve	2
15***19	Lockwasher	16
18***74	Cover	2

See all parts with full part numbers in Heavy Parts AI →

257-0098 Bracket Gp-Mounting

15***18	Lockwasher	6
17***33	Cover	1
25***98	Bracket Group-Mounting	1
25***00	Bracket As-Mounting	1

See all parts with full part numbers in Heavy Parts AI →

255-0001 Bracket Gp-Mounting

17***90	Bolt-Socket Head; (M20x2.5x70-mm)	36
25***01	Bracket Group-Mounting	1
25***99	Bracket Group-Mounting	1
8T***23	Washer-Plated; (22x35x3.5-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

169-5308 Bracket Gp-Mounting

16***08	Bracket Group-Mounting	1
16***82	Bolt-Socket Head; (M24x3x70-mm)	14
17***45	Bracket Group-Mounting	1
8T***67	Washer-Hard; (26x44x4-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

197-5353 Bracket Gp-Mounting

15***19	Lockwasher	16
17***61	Cover	2
19***53	Bracket Group-Mounting	1
19***54	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

184-7651 Edge Gp-Cutting

14***66	Screw-Flat Head; (M24x3x160-mm)	9
14***25	Screw-Flat Head	9
17***81	Edge-Cutting	1
17***84	Shim; (1-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

217-1412 Edge Gp-Cutting

14***78	Lockwasher	3
17***80	Bolt-Socket Head; (M20x2.5x120-mm)	3
21***12	Edge Group-Cutting	1
22***50	Plate-Wear	1

See all parts with full part numbers in Heavy Parts AI →

234-1339 Edge Gp-Cutting

14***78	Lockwasher	3
17***93	Bolt-Socket Head; (M20x2.5x80-mm)	3
22***49	Plate-Wear	1
23***39	Edge Group-Cutting	1

See all parts with full part numbers in Heavy Parts AI →

236-2204 Edge Gp-Cutting

20***86	Plate-Lock	2
23***04	Edge Group-Cutting	1
8T***32	Nut (M16 X 2 Thd); (M16x2.00 Thd)	2
8T***75	Bolt; (M16x2x90-mm)	1

See all parts with full part numbers in Heavy Parts AI →

195-0780 Edge Gp-Cutting

14***15	Screw-Flat Head; (M20x2.5x100-mm)	7
14***87	Screw-Flat Head	7
16***74	Shim; (0.5-mm Thk)	10
16***75	Shim; (1-mm Thk)	14

See all parts with full part numbers in Heavy Parts AI →

217-1410 Edge Gp-Cutting

14***87	Screw-Flat Head	2
14***75	Bolt; (M20x2.5x75-Thd)	6
15***21	Lockwasher	3
16***85	Edge-Cutting	4

See all parts with full part numbers in Heavy Parts AI →

217-1413 Edge Gp-Cutting

11***30	Bolt-Socket Head; (M20x2.5x150-mm)	4
14***78	Lockwasher	4
21***13	Edge Group-Cutting	1
22***51	Plate-Wear	1

See all parts with full part numbers in Heavy Parts AI →

234-9152 Edge Gp-Cutting

19***00	Bar	1
23***52	Edge Group-Cutting	1
8T***89	Locknut; (M10x1.15-Thd)	2
8T***66	Bolt-Plt; (M10 X 1.5 X 60)	2

See all parts with full part numbers in Heavy Parts AI →

196-2023 Edge Gp-Cutting

14***15	Screw-Flat Head; (M20x2.5x100-mm)	7
14***87	Screw-Flat Head	7
14***78	Lockwasher	3
16***74	Shim; (0.5-mm Thk)	10

See all parts with full part numbers in Heavy Parts AI →

177-3359 Edge Gp-Cutting

14***15	Screw-Flat Head; (M20x2.5x100-mm)	14
14***81	Screw-Flat Head	3
16***85	Edge-Cutting	1
16***86	Shim; (1-mm Thk)	5

See all parts with full part numbers in Heavy Parts AI →

216-7648 Edge Gp-Cutting

14***98	Screw-Flat Head; (M20x2.5x90-mm)	12
14***87	Screw-Flat Head	3
15***21	Lockwasher	3
16***85	Edge-Cutting	1

See all parts with full part numbers in Heavy Parts AI →

171-5499 Edge Gp-Cutting

14***98	Screw-Flat Head; (M20x2.5x90-mm)	12
14***87	Screw-Flat Head	3
16***85	Edge-Cutting	1
16***86	Shim; (1-mm Thk)	5

See all parts with full part numbers in Heavy Parts AI →

197-7455 Edge Gp-Cutting

11***30	Bolt-Socket Head; (M20x2.5x150-mm)	4
14***66	Screw-Flat Head; (M24x3x160-mm)	9
14***25	Screw-Flat Head	9
14***78	Lockwasher	4

See all parts with full part numbers in Heavy Parts AI →

196-2017 Shear Gp-Hydraulic

19***17	Shear Group-Hydraulic	1
8T***32	Nut (M16 X 2 Thd); (M16x2.00 Thd)	2
8T***75	Bolt; (M16x2x90-mm)	1
9X***57	Washer-Pipe As To Main Pump Suction Port	2

See all parts with full part numbers in Heavy Parts AI →

195-0774 Shear Gp-Hydraulic

19***74	Shear Group-Hydraulic	1
8T***32	Nut (M16 X 2 Thd); (M16x2.00 Thd)	2
8T***75	Bolt; (M16x2x90-mm)	1
9X***57	Washer-Pipe As To Main Pump Suction Port	2

See all parts with full part numbers in Heavy Parts AI →

197-3844 Shear Gp-Hydraulic

19***44	Shear Group-Hydraulic	1
8T***32	Nut (M16 X 2 Thd); (M16x2.00 Thd)	2
8T***75	Bolt; (M16x2x90-mm)	1
9X***57	Washer-Pipe As To Main Pump Suction Port	2

See all parts with full part numbers in Heavy Parts AI →

199-8930 Shear Gp-Hydraulic

19***68	Rotator Group-Hydraulic	1
19***19	Housing Group-Shear	1
19***30	Shear Group-Hydraulic	1
21***98	Housing Group-Shear	1

See all parts with full part numbers in Heavy Parts AI →

197-3520 Shear Gp-Hydraulic

19***20	Shear Group-Hydraulic	1
20***17	Plate-Lock	2
8T***32	Nut (M16 X 2 Thd); (M16x2.00 Thd)	2
8T***75	Bolt; (M16x2x90-mm)	1

See all parts with full part numbers in Heavy Parts AI →

197-7185 Shear Gp-Hydraulic

17***26	Rotator Group-Hydraulic	1
19***77	Housing Group-Shear	1
19***85	Shear Group-Hydraulic	1
21***95	Housing Group-Shear	1

See all parts with full part numbers in Heavy Parts AI →

VHS-50 serial number reference

The ID/rating plate is riveted to the shear housing near the mounting bracket/pivot, the same spot used on the other VHS-family shears. Read the first three letters as the serial prefix (ties the unit to its build series/parts manual) and the digits that follow as the sequence number within that run - e.g. a plate reading BNA00512 is unit 512 of the BNA VHS-50 run.

Prefix	Identifies	Notes
BNA	VHS-50 base/first-generation demolition & scrap shear (Verachtert-built, Cat work tool)	Documented in the same parts-manual family as the VHS-10 (BTZ), VHS-30 (BXN) and VHS-60 (BGD) shears. The access cover for the shear housing is catalogued specifically under this model's own listing starting S/N BNA104-UP, with the wider housing/swivel/speed-control valve group starting BNA1-UP. Passive hydraulic attachment - no engine, ECM or fault codes of its own; it runs off the carrier excavator's hydraulics.

Frequently asked questions

Does the Caterpillar VHS-50 have its own engine?

No. It is a passive, purely hydro-mechanical demolition and scrap shear with no engine, ECM, or onboard power pack. All closing and opening force comes from the carrier excavator's auxiliary hydraulic circuit, so there is no engine spec, fuel system, or fault-code system belonging to the shear itself.

What is the operating weight of the VHS-50?

It depends on generation. The base VHS-50 (roughly 1996-2005) runs about 3.6 t (7,937 lb); the later VHS-50/3 (roughly 2009-2012) runs about 4 t (8,818 lb). Treat both as starting points and verify the exact figure against the unit's data plate, since weight also shifts slightly with mounting bracket and hose configuration.

What replaced the Caterpillar VHS-50?

No confirmed factory successor is documented for the VHS-50 specifically. The VHS family continued in parallel through the /3-generation refresh rather than being retired for a distinct new model, and Caterpillar's current S-series mobile scrap and demolition shears now occupy a similar carrier segment, but that is a market successor, not a documented formal supersession.

What VHS-50 owners discuss

How much blade wear is normal before the VHS-50's jaws need attention, and can they be reground?

Yes. The cutting edges and heel plates are wear-resistant alloy plate, and owners run them until the edge rounds over or the heel plate thins, then weld-build the heel and regrind or replace the bolt-in cutting inserts. Skipping this lets the jaw lose bite and start crushing instead of shearing, which accelerates wear on everything downstream (pins and cylinder). Track hours between regrinds against material cut (rebar/plate vs. structural) since abrasive scrap eats an edge far faster than clean structural steel.

The mounting pins at the boom/stick connection have developed play. Is this typical, and what causes it?

Some play develops over time on any high-cycle pinned attachment, and the VHS-50's linkage is no exception. Common cause: the grease groove in the bushing wears down (or the pin wears a matching groove into itself) until grease can no longer bridge the joint, so the bushing and pin start running dry and wear accelerates. Grit and moisture mixing into the grease turns it into an abrasive paste that grinds both surfaces further. A moly-fortified grease and a shorter greasing interval in dirty demolition/scrap environments slows this down; measurable pin-to-bushing play beyond the linkage's design tolerance calls for pin/bushing replacement rather than just more grease.

Hoses and seals on this shear seem to wear out faster than on other attachments. Why?

The shear has no hydraulics of its own; every hose, seal, and swivel on it runs off the carrier's auxiliary circuit, so it inherits whatever heat, pressure spikes, and contamination are already in that system. Flexing hoses at the boom-tip pivot points see more fatigue cycles than fixed plumbing, and any grit or moisture already in the carrier's oil becomes an abrasive that attacks seals throughout the shear's cylinder. Matching carrier flow/pressure to the shear's rated window and keeping the carrier's hydraulic oil clean does more for hose/seal life on this tool than anything done to the shear itself.

Does the VHS-50 need to be matched to a specific excavator size, and what happens if it isn't?

Yes. The base VHS-50 pairs to carriers in roughly the 30 to 42 t class, while the later VHS-50/3 scales up to roughly 35 to 60 t carriers, the exact window depends on which generation is on hand, since opening and cutting-force ratings differ between them. Both mount via the standard two-pin-plus-H-link pin-on arrangement rather than a quick-coupler. Running it on an undersized or flow-starved carrier reduces cutting force and stalls the jaw in heavier material; running it on a carrier that pushes more pressure than the shear is rated for risks blowing cylinder seals. Confirm the carrier's aux flow and pressure against the shear's rated range before putting it into service.

The jaw holds a load fine but slowly creeps open (or closed) over time. What's going on?

That's classic cylinder drift, and on a shear it usually traces to a worn piston or rod seal letting oil bypass across the piston until pressure equalizes on both sides. Contaminated hydraulic oil (dirt, water, air) and heat both accelerate seal wear and are common root causes, not just old age. Because a drifting jaw on a shear can pinch or release material unexpectedly under load, treat this as a safety item — have your dealer verify the cylinder seal condition and carrier oil cleanliness before returning the tool to service.

What should I inspect before buying a used VHS-50?

Walk the jaw edges and heel plates for remaining wear material and check whether inserts are original or already built up from prior regrinds. Work the mounting pins for play and pull the grease fittings to confirm they still take grease. Look closely at the mounting ears and pivot bosses for cracks — fresh cracks show bright bare metal, old ones are rust-stained, and either is a red flag on a structural, high-cycle component. Cycle the cylinder under load to check for drift, and inspect hoses and swivels for weeping or chafe. Confirm which generation (base VHS-50 vs. VHS-50/3) is on hand, since opening and cutting-force ratings differ between them, and verify it matches the intended carrier's hydraulic output. Given how much of this checklist touches structural and pressure-bearing components, have your dealer verify jaw, pin, and cylinder condition on a full inspection before purchase.

Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.

Need a specific VHS-50 part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app