Caterpillarengine - generator setuninterruptible pwr su
Caterpillar UPS1000S
Maintenance schedule, common problems & OEM parts breakdown
The Cat UPS1000S is a stationary, battery-free flywheel-based uninterruptible power supply module sized in the 1000 kVA tier, built to protect facility and data-center loads through a utility disturbance until standby power takes over. It carries no internal combustion engine — energy storage and conversion runs through a spinning flywheel paired with an IGBT bi-directional converter housed in a switchgear-style cabinet built on the ES12F frame. It sits in the single-module family alongside the smaller UPS 300 and UPS 750 units and shares a combined parts and service manual with its larger UPS1200S sibling. Caterpillar brought this flywheel UPS line to market starting in 2000 in North America and 2001 in Europe through an alliance with the flywheel technology's original developer, and single-module ratings such as the 1000S stayed in the catalog for years afterward. Operating weight for this exact rating isn't published; the family scales from roughly a few thousand kilograms for the smaller 300 kVA cabinet up past that for the 750 kVA unit and into larger multi-cabinet 1200 kVA systems, so treat weight as configuration-dependent rather than a fixed number. Configurations include the base single-module cabinet plus an optional remote status panel, a generator-set start-interface module, and, on later production, a contactless magnetic-bearing flywheel in place of the original mechanical-bearing design.
Across this flywheel UPS family the main generational change is the move from mechanical ball-bearing flywheel assemblies to contactless magnetic-bearing designs, which removes the recurring bearing-wear maintenance item almost entirely and stretches service intervals. Caterpillar also grew the lineup sideways rather than issuing a direct replacement for the 1000S: single-module ratings such as the 300, 750, 1000S, and 1200S each cover one power tier per cabinet, while the later Z-series (300Z through 1200Z) parallels smaller building-block modules for scalable, redundant capacity — a different topology, not a straight successor. In the used and parts market these flywheel UPS modules mostly surface from decommissioned data-center and critical-facility power trains. Buyers should weigh remaining life against the commonly cited 15 to 20 year service window for this class of equipment and check maintenance history on the vacuum pump and bearing set before committing, since a clean-looking cabinet can still be close to end of life on those specific wear items.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar UPS1000S specifications
Engine
| Power Unit Type | Flywheel-based uninterruptible power supply (UPS). There is no internal combustion engine — energy storage and conversion is handled by a spinning flywheel paired with an IGBT-based bi-directional converter. |
| Model Family | Single-module flywheel UPS, grouped in factory parts documentation together with the UPS 1200S. Sibling to the UPS 300 and UPS 750 single-module systems and to the UPS 300Z/600Z/900Z/1200Z multi-module Series. |
| Rated Capacity | 1000 kVA nameplate rating, consistent with this UPS family's naming convention where the model number states the kVA rating (the 300, 750, and 1200 single-module units each carry their kVA figure as the model name). Exact kW rating is not published for this rating in available literature — sibling units in the family show both 0.8 and 0.9 power-factor ratings (300 kVA/240 kW, 750 kVA/675 kW, 1200 kVA/960 kW), so the 1000S figure cannot be assumed from either pattern. Verify with your Cat dealer. |
| Emissions Tier | Not applicable — no internal combustion engine, so no emissions certification tier applies. |
Weights
| Operating / Shipping Weight | Not documented for the 1000S rating specifically in available spec literature. Weight scales with capacity across this family (the 750 kVA single-module unit is about 4,242 kg / 9,350 lb; larger multi-cabinet 1200 kVA systems run several thousand kilograms heavier across separate inverter, static-switch, and flywheel cabinets). Do not assume the 1000S matches either sibling — confirm the exact figure with your dealer. |
| Ground Pressure | Not applicable — stationary cabinet system, not a tracked or wheeled machine. |
Dimensions
| Configuration | Stationary switchgear-style enclosure system (flywheel power unit plus system input/output cabinet), not a mobile machine. Transport length/width/height and wheelbase figures used for mobile equipment don't apply in the usual sense. |
| Cabinet Footprint | Not published for the 1000S rating specifically. Sibling single-module cabinets in this family range roughly from about 1.5 m wide (300 kVA unit) up to over 3 m wide (750 kVA unit) with depths near 0.9 to 1.0 m and heights near 2.0 to 2.3 m — figures vary by rating and are not confirmed for the 1000S; verify with your dealer. |
Performance
| Travel Speed | Not applicable — stationary equipment with no travel or drive system. |
| Flywheel Ride-Through / Backup Performance | Not confirmed for the 1000S specifically. Sibling single-module units in this family provide flywheel ride-through in the range of roughly 14 to 59 seconds depending on load level (100% down to 25% load), with recharge to full readiness in a few minutes. Exact ride-through and recharge figures for the 1000 kVA rating are not published in available sources — verify with your dealer. |
| System Efficiency | Not confirmed for the 1000S specifically. Sibling single-module and multi-module units in this UPS family are rated 97% to 98% total system efficiency; the 1000S figure is expected to fall in this range but is not independently documented. |
Service capacities (summary)
| Fuel Tank | Not applicable — no internal combustion engine, no fuel system. |
| Hydraulic System | Not applicable — no hydraulic system on this equipment. |
| Engine Oil | Not applicable — no engine. |
| Cooling System | Air-cooled by redundant cooling fans, per this UPS family's standard equipment list. No liquid coolant system or coolant capacity is published. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Caterpillar UPS1000S maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 43,800 h |
|
| Every 70,080 h |
|
Servicing the UPS1000S beyond the schedule
Predictive Maintenance & Fluid Analysis
The UPS1000S carries no engine oil or coolant to sample - its flywheel spins inside a sealed, evacuated housing, so condition monitoring centers on the vacuum gauge trend instead of fluid analysis. Track vacuum level against baseline at every inspection; a slow decline points to a developing seal or pump problem. Pair that with periodic thermal imaging of bus bar and power-connection joints, DC bus capacitor capacitance checks, and a review of the touchscreen alarm history to catch flywheel-speed or inverter drift before it becomes a fault.
Corrective & Common Repairs
Most field faults on the UPS1000S trace back to the power-electronics cabinet, not the flywheel itself. Rectifier and inverter power modules along with the control/logic board are the parts most often flagged, typically from overcurrent or overtemperature events, blocked cooling, or DC bus capacitors gradually losing capacitance before they fail outright. A fault pointing at the inverter or rectifier stage should be diagnosed at the electronics cabinet first. Static-switch transfer glitches and remote-monitoring link dropouts are the next most common corrective items, usually a loose connection or a failed cable.
Overhaul & Rebuild Points
Overhaul work on the UPS1000S centers on two wear items: the vacuum pump that maintains the flywheel chamber's low pressure, commonly serviced on an 8 to 10 year cycle, and the bearing set on mechanical-bearing frames, typically addressed every 5 to 8 years. Neither is field work - the flywheel spins at high speed inside a sealed enclosure, and opening it outside a factory procedure is both a warranty issue and a safety issue given the stored rotational energy. Route any suspected flywheel or bearing fault to a Cat dealer for teardown.
Seasonal & Environment Servicing
With no fuel system or engine block to worry about, seasonal servicing on the UPS1000S is really about the cabinet environment. Keep intake vents and cooling fans clear of dust, especially in industrial or outdoor-adjacent installations, since blocked airflow drives the overtemperature faults that damage power electronics. Watch for ambient temperature swings and condensation risk in unconditioned mechanical rooms. If the unit sits idle through a season without running, have your dealer verify the flywheel still holds vacuum and recommission it properly before returning it to service.
UPS1000S common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 240-2526 | Filter Element-Encl Air | Air intake service | Check fitment → |
| 244-4995 | Filter As-Electrical | Scheduled service item | Check fitment → |
| 244-4994 | Filter As-Electrical | Scheduled service item | Check fitment → |
| 244-4988 | Filter As-Electrical | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
UPS1000S fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| SUMMARY FAULT / SYSTEM FAULT | Master fault indication that one or more critical subsystems (inverter, static switch, control power, or flywheel module) has latched a fault and self-diagnostics have flagged the unit for attention. | Any underlying subsystem alarm bundled into one top-level indicator; root cause is only identified by drilling into the touchscreen alarm history. | Open the alarm/event log on the touchscreen operator interface to find the specific underlying alarm, then contact a factory-certified UPS technician before clearing. |
| ON BYPASS | Load has been transferred off the UPS inverter onto the static/maintenance bypass source. | Input voltage or frequency outside the programmable acceptance window, an output overload the inverter cannot carry, or a manual/scheduled bypass command. | Check incoming utility voltage and frequency against the programmable input range, confirm no downstream overload, and return the unit to normal mode once the condition clears. |
| OVERLOAD | Output current has exceeded the unit's continuous overload rating. | Connected critical load exceeds the module's rated kVA, or a downstream short/ground fault is drawing excess current. | Compare measured output amps to the nameplate rated output current, shed non-essential load, and inspect downstream feeders for faults. |
| LOSS OF UTILITY / INPUT FAULT | Normal AC input has dropped outside the programmable voltage or frequency window, or been interrupted outright. | Utility outage, upstream breaker trip, or generator set not yet online to backfeed the input. | Verify utility or standby generator supply at the input terminals, confirm the flywheel took the load through the disturbance, and check the optional generator-set start module status if fitted. |
| FLYWHEEL FAULT / LOW FLYWHEEL SPEED | The flywheel energy-storage module is below rated speed and cannot deliver its full programmed ride-through time. | A recent discharge event without enough recharge time (full recharge to rated speed typically takes a couple of minutes), or a flywheel bearing/vacuum-system problem. | Allow the programmed recharge interval to complete before another disturbance, check the flywheel status indication on the touchscreen, and escalate to a factory-certified technician if speed will not recover. |
| COMMUNICATION / REMOTE MONITORING FAULT | Loss of the link between the UPS control electronics and the remote status panel, modem, or Ethernet-based monitoring software. | Failed or disconnected RS232/RS485 serial link, network cable, or modem connection. | Check physical connections and network settings for the remote monitoring/Ethernet link and confirm the remote status panel LEDs are receiving power. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
All UPS1000S assemblies by section
Every catalogued assembly group for the Caterpillar UPS1000S. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Electrical And Starting System
289-4938 Block As-Terminal
| 25***73 | Block As; (Thermal Switch) | 1 |
| 28***38 | Block As-Terminal | 1 |
239-9265 Board As-Circuit
| 20***73 | Fuse; (1-Ampere) | 2 |
| 23***65 | Board As-Circuit | 1 |
282-3659 Board As-Circuit
| 18***60 | Fuse; (2-Ampere) | 1 |
| 18***61 | Fuse; (5-Ampere) | 2 |
| 23***53 | Fuse; (5-Ampere) | 8 |
242-9373 Board As-Circuit
| 18***61 | Fuse; (5-Ampere) | 2 |
| 24***73 | Board As-Circuit | 1 |
242-7425 Board As-Circuit
| 18***56 | Fuse; (30-Ampere)(Output) | 2 |
| 24***46 | Fuse; (3.15-Ampere) | 2 |
| 24***25 | Board As-Circuit | 1 |
242-7420 Board As-Circuit
| 24***20 | Board As-Circuit | 1 |
| 27***58 | Board As-Circuit | 1 |
256-6468 Board As-Circuit
| 20***70 | Fuse; (4-Ampere) | 1 |
| 25***68 | Board As-Circuit | 1 |
235-6333 Board As-Circuit -Electro Magnetic Interference
| 23***51 | Capacitor | 3 |
| 23***33 | Board As-Circuit; -Electro Magnetic Interference | 1 |
242-7428 Board As-Circuit
| 19***99 | Fuse; (10-Ampere) | 1 |
| 23***53 | Fuse; (5-Ampere) | 1 |
| 24***46 | Fuse; (3.15-Ampere) | 1 |
242-7424 Board As-Circuit
| 24***24 | Board As-Circuit | 1 |
242-7427 Board As-Circuit
| 20***73 | Fuse; (1-Ampere) | 1 |
| 24***27 | Board As-Circuit | 1 |
242-7423 Board As-Circuit
| 24***23 | Board As-Circuit | 1 |
279-6656 Board As-Circuit
| 27***01 | Fuse; (3-Ampere) | 2 |
| 27***56 | Board As-Circuit | 1 |
242-7421 Board As-Circuit
| 24***46 | Fuse; (3.15-Ampere) | 1 |
| 24***21 | Board As-Circuit | 1 |
279-6658 Board As-Circuit
| 18***60 | Fuse; (2-Ampere) | 1 |
| 24***56 | Fuse; (0.5-Ampere) | 3 |
| 24***57 | Fuse; (2.5-Ampere) | 1 |
242-7422 Board As-Circuit
| 24***22 | Board As-Circuit | 1 |
242-9375 Board As-Circuit
| 18***60 | Fuse; (2-Ampere) | 1 |
| 18***61 | Fuse; (5-Ampere) | 2 |
| 23***53 | Fuse; (5-Ampere) | 8 |
242-9376 Board As-Circuit
| 18***54 | Fuse; (20-Ampere)(Output) | 1 |
| 19***99 | Fuse; (10-Ampere) | 2 |
| 20***67 | Fuse; (1-Ampere) | 1 |
244-8756 Board As-Circuit
| 24***56 | Board As-Circuit | 1 |
242-9374 Board As-Circuit
| 20***73 | Fuse; (1-Ampere) | 2 |
| 24***74 | Board As-Circuit | 1 |
242-7429 Board As-Circuit
| 24***29 | Board As-Circuit | 1 |
| 24***51 | Capacitor | 6 |
279-6655 Board As-Circuit -Controller
| 19***04 | Fuse; (3-Ampere) | 3 |
| 23***29 | Battery; (Lithium) | 1 |
| 23***53 | Fuse; (5-Ampere) | 1 |
239-9264 Board As-Circuit
| 23***29 | Battery; (Lithium) | 1 |
| 23***64 | Board As-Circuit | 1 |
245-1599 Board As-Circuit
| 24***99 | Board As-Circuit | 1 |
| 25***47 | Diode | 1 |
239-9266 Board As-Circuit
| 23***29 | Battery; (Lithium) | 1 |
| 23***66 | Board As-Circuit | 1 |
294-2080 Bus Bar As -4-Wire
| 24***29 | Board As-Circuit | 3 |
| 29***80 | Bus Bar As; -4-Wire | 1 |
244-7567 Bus Bar As
| 24***49 | Bus | 6 |
| 24***67 | Angle | 6 |
| 24***67 | Bus Bar As | 1 |
257-8458 Bus Bar As
| 25***58 | Bus Bar As | 1 |
257-8455 Bus Bar As
| 25***55 | Bus Bar As | 1 |
257-8287 Bus Bar As
| 25***87 | Bus Bar As | 1 |
| 25***89 | Circuit Breaker As; (1600-Ampere)(Neutral) | 1 |
257-7944 Bus Bar As
| 24***29 | Board As-Circuit | 2 |
| 25***44 | Bus Bar As | 1 |
254-3922 Bus Bar As
| 25***22 | Bus Bar As | 1 |
259-9050 Bus Bar As
| 25***50 | Bus Bar As | 1 |
257-7943 Bus Bar As
| 25***43 | Bus Bar As | 1 |
245-2869 Bus Bar Gp
| 24***67 | Angle | 3 |
| 24***69 | Bus Bar Group | 1 |
245-2874 Bus Bar Gp
| 24***74 | Bus Bar Group | 1 |
| 24***21 | Bus | 1 |
| 24***22 | Bus | 1 |
245-2906 Bus Bar Gp
| 24***06 | Bus Bar Group | 1 |
| 24***07 | Bar As | 1 |
| 24***08 | Bar As | 1 |
245-2866 Bus Bar Gp
| 24***43 | Bar-Bus | 1 |
| 24***44 | Bar-Bus | 1 |
| 24***45 | Bar-Bus | 1 |
245-4778 Cable Gp -External Source Synchronizing
| 24***70 | Cable As | 1 |
| 24***71 | Cable As | 1 |
| 24***77 | Cable As | 1 |
245-4775 Cable Gp -Generator Start, Dual
| 24***75 | Cable Group; -Generator Start, Dual | 1 |
| 25***20 | Cable | 1 |
| 25***21 | Cable | 1 |
245-4774 Cable Gp -Generator Start Option Output Circuit Breaker
| 24***74 | Cable Group; -Generator Start Option Output Circuit Breaker | 1 |
| 25***20 | Cable | 1 |
| 25***21 | Cable | 1 |
259-6318 Circuit Breaker & Mounting Gp -System I/O
| 25***18 | Circuit Breaker & Mounting Group; -System I/O | 1 |
| 25***19 | Circuit Breaker As; (2000-Ampere) | 1 |
245-2868 Circuit Breaker & Mounting Gp
| 24***24 | Circuit Breaker As; (1600-Ampere) | 1 |
| 24***68 | Circuit Breaker & Mounting Group | 1 |
257-7945 Circuit Breaker & Mounting Gp
| 25***43 | Bus Bar As | 1 |
| 25***45 | Circuit Breaker & Mounting Group | 1 |
| 25***46 | Circuit Breaker As; (1600-Ampere) | 1 |
257-8456 Circuit Breaker & Mounting Gp
| 25***55 | Bus Bar As | 1 |
| 25***56 | Circuit Breaker & Mounting Group | 1 |
| 25***57 | Circuit Breaker As; (4-Pole, 1600-Ampere, 600-Volt) | 1 |
244-7556 Circuit Breaker & Mounting Gp -System I/O
| 24***19 | Circuit Breaker As; (1600-Ampere) | 1 |
| 24***56 | Circuit Breaker & Mounting Group; -System I/O | 1 |
258-5032 Circuit Breaker & Mounting Gp
| 25***32 | Circuit Breaker & Mounting Group | 1 |
| 25***34 | Circuit Breaker As; (2000-Ampere) | 1 |
244-1408 Conduit Gp
| 24***08 | Conduit Group | 1 |
| 27***81 | Cable; (24-Ga)(Yellow) | 1 |
| 27***82 | Cable; (24-Ga)(Grey) | 1 |
258-6904 Connection Gp-Electrical -Maintenance Bypass, 4-Wire
| 25***04 | Connection Group-Electrical; -Maintenance Bypass, 4-Wire | 1 |
244-6991 Contactor As
| 24***67 | Contactor; (230-Volt) | 1 |
| 24***91 | Contactor As | 1 |
244-4989 Contactor Gp
| 24***89 | Contactor Group | 1 |
| 24***91 | Contactor As | 2 |
203-3971 Diskette
| 20***71 | Diskette | 1 |
203-3976 Diskette
| 20***76 | Diskette | 1 |
276-9057 Fuse Gp
| 24***01 | Block; (Terminal End)(Fuse) | 2 |
| 24***37 | Fuse; (2.5-Ampere) | 2 |
| 25***70 | Block | 1 |
245-0537 Fuse Gp -Static Switch
| 24***20 | Block-Fuse; (2-Pole)(2-Pole) | 2 |
| 24***20 | Block-Fuse; (3-Pole) | 1 |
| 24***37 | Fuse; (2.5-Ampere) | 4 |
245-3637 Fuse Gp -Inverter, Neutral
| 19***71 | Fuse; (63-Ampere) | 1 |
| 24***81 | Holder; (Fuse) | 2 |
| 24***97 | Switch; (Fuse) | 1 |
244-4996 Fuse Gp -Control
| 20***77 | Fuse; (200-Ampere) | 1 |
| 20***69 | Indicator; (Fuse) | 1 |
| 24***96 | Fuse Group; -Control | 1 |
276-9059 Fuse Gp
| 19***97 | Fuse; (3-Ampere) | 6 |
| 24***01 | Block; (Terminal End)(Fuse) | 3 |
| 24***53 | Fuse; (1-Ampere) | 3 |
294-2081 Fuse Gp
| 24***53 | Fuse; (1-Ampere) | 4 |
| 27***50 | Block-Fuse | 1 |
| 29***81 | Fuse Group | 1 |
293-5402 Kit-Switch -Emergency Power Off
| 28***13 | Switch As-Push Button; (Emergency Power Off) | 1 |
| 29***02 | Kit-Switch; -Emergency Power Off | 1 |
257-8288 Neutral Bus Bar As
| 25***88 | Neutral Bus Bar As | 1 |
244-8658 Panel Gp-Circuit Breaker
| 24***75 | Panel Group-Circuit Breaker | 1 |
| 24***58 | Panel Group-Circuit Breaker | 1 |
244-7576 Panel Gp-Circuit Breaker
| 24***07 | Plate | 1 |
| 24***09 | Block-Terminal; (4-Pole) | 1 |
| 24***76 | Panel Group-Circuit Breaker | 1 |
244-8659 Panel Gp-Circuit Breaker
| 24***76 | Panel Group-Circuit Breaker | 1 |
| 24***59 | Panel Group-Circuit Breaker | 1 |
244-7571 Panel Gp-Circuit Breaker
| 24***24 | Circuit Breaker As; (1600-Ampere) | 1 |
| 24***56 | Circuit Breaker & Mounting Group; -System I/O | 1 |
| 24***71 | Panel Group-Circuit Breaker | 1 |
244-7575 Panel Gp-Circuit Breaker
| 24***07 | Plate | 2 |
| 24***09 | Block-Terminal; (4-Pole) | 1 |
| 24***75 | Panel Group-Circuit Breaker | 1 |
254-5985 Panel Gp-Circuit Breaker
| 24***26 | Circuit Breaker As; (1600-Ampere) | 1 |
| 24***56 | Circuit Breaker & Mounting Group; -System I/O | 1 |
| 25***85 | Panel Group-Circuit Breaker | 1 |
244-8660 Panel Gp-Circuit Breaker
| 24***75 | Panel Group-Circuit Breaker | 1 |
| 24***60 | Panel Group-Circuit Breaker | 1 |
244-8661 Panel Gp-Circuit Breaker
| 24***76 | Panel Group-Circuit Breaker | 1 |
| 24***61 | Panel Group-Circuit Breaker | 1 |
259-3170 Panel Gp-Circuit Breaker
| 25***34 | Circuit Breaker As; (2000-Ampere) | 1 |
| 25***70 | Panel Group-Circuit Breaker | 1 |
| 25***18 | Circuit Breaker & Mounting Group; -System I/O | 1 |
265-5574 Resistor As
| 26***74 | Resistor As | 1 |
261-7479 Resistor As
| 26***79 | Resistor As | 1 |
| 26***81 | Kit-Resistor Wire; (12-Ohm, 500-Watt) | 1 |
243-3782 Sensor Gp-Temperature -Flywheel Bearing
| 20***52 | . Coller, Sensor-Vacuum; (Flywheel Bearing) | 1 |
| 24***13 | Retainer; (Gauge) | 1 |
| 24***82 | Sensor Group-Temperature; -Flywheel Bearing | 1 |
289-4936 Strip As-Terminal
| 18***52 | Fuse; (2-Ampere)(Input) | 8 |
| 24***37 | Fuse; (2.5-Ampere) | 2 |
| 24***53 | Fuse; (1-Ampere) | 4 |
245-0560 Switch As -Static
| 24***07 | Plate | 4 |
| 24***09 | Block-Terminal; (4-Pole) | 2 |
| 24***60 | Switch As; -Static | 1 |
253-8957 Switch As-Power -Remote Emergency Stop
| 25***72 | Switch-Push Button; (Remote Emergency Stop) | 1 |
| 25***57 | Switch As-Power; -Remote Emergency Stop | 1 |
294-5574 Switch As-Push Button -Emergency Power Off
| 28***13 | Switch As-Push Button; (Emergency Power Off) | 1 |
| 29***74 | Switch As-Push Button; -Emergency Power Off | 1 |
294-2078 Switch As-Selector -Service Mode
| 29***89 | Switch; (Select) | 1 |
| 29***78 | Switch As-Selector; -Service Mode | 1 |
287-5712 Switch Gp-Push Button -Emergency Power Off
| 28***12 | Switch Group-Push Button; -Emergency Power Off | 1 |
| 28***13 | Switch As-Push Button; (Emergency Power Off) | 1 |
290-3873 Switch Gp-Temperature
| 26***25 | Switch-Thermal; (150-Deg)(Transformer) | 3 |
| 26***26 | Switch-Thermal; (160-Deg)(Transformer) | 3 |
| 26***27 | Thermistor | 3 |
263-0793 Transformer As
| 26***25 | Switch-Thermal; (150-Deg)(Transformer) | 3 |
| 26***26 | Switch-Thermal; (160-Deg)(Transformer) | 3 |
| 26***27 | Thermistor | 3 |
245-0534 Transformer As
| 24***10 | Transformer As-Current; (Ratio 2000:5) | 3 |
| 24***34 | Transformer As | 1 |
290-3872 Transformer Gp
| 24***10 | Transformer As-Current; (Ratio 2000:5) | 1 |
| 29***72 | Transformer Group | 1 |
291-1075 Transformer Gp
| 29***73 | Switch Group-Temperature | 1 |
| 29***21 | Base | 1 |
| 29***75 | Transformer Group | 1 |
245-0564 Transformer Gp-Current
| 24***10 | Transformer As-Current; (Ratio 2000:5) | 3 |
| 24***64 | Transformer Group-Current | 1 |
Enclosures, Guards And Bases
244-7601 Baffle As-Air Flow
| 24***01 | Baffle As-Air Flow | 1 |
| 24***38 | Resistor; (5000-Ohm, 175-Watt) | 6 |
290-6621 Base
| 24***68 | Cleat | 2 |
| 29***21 | Base | 1 |
244-7369 Base As
| 24***69 | Base As | 1 |
| 24***39 | Cleat; (Base) | 2 |
244-4993 Fan As-Circulating
| 24***50 | Guard-Fan; (Fan) | 1 |
| 24***94 | Fan As-Circulating | 1 |
| 24***93 | Fan As-Circulating | 1 |
243-3794 Fan As-Circulating
| 24***94 | Fan As-Circulating | 1 |
| 24***43 | Cable As; (Control) | 1 |
| 24***44 | Cable As; (Power) | 1 |
256-6472 Fan Gp-Circulating
| 24***93 | Fan As-Circulating | 3 |
| 25***71 | Panel As-Electrical | 1 |
| 25***72 | Fan Group-Circulating | 1 |
243-3792 Fan Gp-Circulating
| 24***92 | Fan Group-Circulating | 1 |
| 24***94 | Fan As-Circulating | 3 |
244-7593 Fan Gp-Circulating -Plenum
| 24***94 | Fan As-Circulating | 2 |
| 24***93 | Fan Group-Circulating; -Plenum | 1 |
244-4991 Fan Gp-Circulating
| 24***91 | Fan Group-Circulating | 1 |
| 24***93 | Fan As-Circulating | 3 |
290-3858 Fan Gp-Circulating
| 24***93 | Fan As-Circulating | 4 |
| 29***58 | Fan Group-Circulating | 1 |
244-8753 Fan Gp-Circulating -Plenum
| 24***93 | Fan Group-Circulating; -Plenum | 1 |
| 24***53 | Fan Group-Circulating; -Plenum | 1 |
245-0565 Fan Gp-Circulating
| 24***85 | Resistor; (25-Ohm, 650-Watt) | 1 |
| 24***93 | Fan As-Circulating | 3 |
| 24***65 | Fan Group-Circulating | 1 |
244-7545 Frame As
| 24***55 | Bar-Bus; (Ground) | 1 |
| 24***56 | Bar-Bus; (Tie In) | 2 |
| 24***45 | Frame As | 1 |
294-3319 Frame As -Internal Components
| 24***84 | Panel Group-Electrical | 1 |
| 24***85 | Panel Group-Electrical | 1 |
| 24***86 | Panel Group-Electrical | 1 |
257-4950 Frame As
| 24***39 | Cleat; (Base) | 2 |
| 25***50 | Frame As | 1 |
245-2870 Frame As
| 24***56 | Bar-Bus; (Tie In) | 2 |
| 24***39 | Cleat; (Base) | 2 |
| 24***70 | Frame As | 1 |
Operator Station
237-9613 Adapter-Communication
| 23***13 | Adapter-Communication | 1 |
| 26***06 | Cable | 1 |
130-3349 Control Gp-Alarm Module
| 13***49 | Control Group-Alarm Module | 1 |
| 22***41 | Screw; (5/16-18x0.875-In) | 16 |
| 22***42 | Seal-O-Ring | 1 |
243-3783 Coupling Gp-Vacuum
| 24***83 | Coupling Group-Vacuum | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 9S***02 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
257-8454 Enclosure Gp-Power Supply
| 25***51 | Enclosure Group-Power Supply | 1 |
| 25***45 | Circuit Breaker & Mounting Group | 1 |
| 25***54 | Enclosure Group-Power Supply | 1 |
244-4981 Enclosure Gp-Power Supply
| 24***11 | Handle; (Door) | 1 |
| 24***16 | Screen; (Front) | 2 |
| 24***24 | Ring | 1 |
244-7596 Enclosure Gp-Power Supply
| 24***56 | Enclosure Group-Power Supply | 1 |
| 24***59 | Panel Group-Electrical | 1 |
| 24***96 | Enclosure Group-Power Supply | 1 |
245-2767 Enclosure Gp-Power Supply
| 24***29 | Door; (Lh) | 1 |
| 24***11 | Handle; (Door) | 2 |
| 24***23 | Plate; (Rear) | 1 |
244-4979 Enclosure Gp-Power Supply
| 20***31 | Switch-Push Button; (Emergency Module Off) | 1 |
| 20***33 | Switch; (Key)(Emergency Stop) | 1 |
| 23***85 | Key; (Control) | 1 |
244-7581 Enclosure Gp-Power Supply
| 24***41 | Panel Group-Electrical | 1 |
| 24***55 | Panel Group-Electrical | 1 |
| 24***56 | Circuit Breaker & Mounting Group; -System I/O | 1 |
244-4997 Enclosure Gp-Power Supply
| 24***83 | Panel Group-Electrical | 1 |
| 24***84 | Panel Group-Electrical | 1 |
| 24***85 | Panel Group-Electrical | 1 |
245-4772 Enclosure Gp-Power Supply
| 24***32 | Switch-Push Button; (Bypass) | 2 |
| 24***05 | Panel Group-Electrical | 1 |
| 24***72 | Enclosure Group-Power Supply | 1 |
244-1407 Enclosure Gp-Power Supply
| 24***06 | Fitting | 1 |
| 24***12 | Fitting | 1 |
| 24***61 | Clamp | 2 |
326-6080 Enclosure Gp-Power Supply
| 32***80 | Enclosure Group-Power Supply | 1 |
259-1170 Enclosure Gp-Power Supply
| 25***51 | Enclosure Group-Power Supply | 1 |
| 25***56 | Circuit Breaker & Mounting Group | 1 |
| 25***59 | Cable; (Ground) | 2 |
244-7384 Enclosure Gp-Power Supply
| 24***30 | Panel; (Main, Top) | 1 |
| 24***32 | Panel; (Subpanel, Top) | 2 |
| 24***31 | Plate; (Side, Rh) | 1 |
245-0529 Enclosure Gp-Power Supply
| 24***31 | Plate; (Side, Rh) | 1 |
| 24***11 | Handle; (Door) | 2 |
| 24***16 | Screen; (Front) | 4 |
259-9049 Enclosure Gp-Power Supply
| 24***71 | Panel Group-Circuit Breaker | 1 |
| 24***72 | Panel Group-Electrical | 1 |
| 24***06 | Bus Bar Group | 1 |
256-6479 Enclosure Gp-Power Supply
| 24***37 | Panel Group-Power Supply | 1 |
| 25***79 | Enclosure Group-Power Supply | 1 |
| 25***70 | Enclosure Group-Power Supply | 1 |
326-5094 Enclosure Gp-Power Supply
| 25***51 | Enclosure Group-Power Supply | 1 |
| 25***50 | Bus Bar As | 1 |
| 32***94 | Enclosure Group-Power Supply | 1 |
257-4951 Enclosure Gp-Power Supply
| 24***11 | Handle; (Door) | 2 |
| 24***16 | Screen; (Front) | 2 |
| 24***23 | Plate; (Rear) | 1 |
244-7356 Enclosure Gp-Power Supply
| 20***73 | Fuse; (1-Ampere) | 2 |
| 24***19 | Board As-Circuit; (Remote Status) | 1 |
| 24***89 | Cable As | 1 |
257-4952 Enclosure Gp-Power Supply
| 25***66 | Panel; (Bottom) | 1 |
| 25***67 | Panel; (Top) | 1 |
| 25***50 | Frame As | 1 |
244-4982 Enclosure Gp-Power Supply
| 24***27 | Board As-Circuit | 1 |
| 24***82 | Enclosure Group-Power Supply | 1 |
244-4995 Filter As-Electrical
| 24***95 | Filter As-Electrical | 3 |
244-4994 Filter As-Electrical
| 24***77 | Inductor | 6 |
| 24***94 | Filter As-Electrical | 1 |
244-4988 Filter As-Electrical
| 24***88 | Filter As-Electrical | 1 |
243-3796 Flywheel Gp-Power Supply
| 18***09 | Resistor; (13-Watt) | 2 |
| 24***42 | Capacitor; (600-Volt) | 24 |
| 24***96 | Flywheel Group-Power Supply | 1 |
244-1409 Flywheel Gp-Power Supply
| 24***97 | Switch; (Fuse) | 2 |
| 24***35 | Capacitor; (1200-Volt) | 2 |
| 24***44 | Capacitor; (450-Volt) | 8 |
244-8714 Module As -Solid-State Switch
| 23***35 | Seal-O-Ring | 2 |
| 23***04 | Pump & Motor Group-Vacuum | 1 |
| 24***12 | Fitting | 1 |
250-7959 Module Gp-Alarm
| 24***03 | Board As-Circuit; (Digital Gate Drive) | 1 |
| 25***59 | Module Group-Alarm | 1 |
240-1892 Module Gp-Converter
| 24***92 | Module Group-Converter | 1 |
| 24***87 | Fuse; (250-Ampere) | 2 |
| 24***97 | Switch; (Fuse) | 2 |
240-1663 Module Gp-Converter
| 13***49 | Control Group-Alarm Module | 1 |
| 19***39 | Film-Control Panel | 1 |
| 24***63 | Module Group-Converter | 1 |
236-4957 Panel Ar-Control
| 23***48 | Panel Group-Control; -Generator Start | 2 |
| 23***50 | Bracket | 4 |
| 23***57 | Panel Ar-Control; -Generator Start, Single | 1 |
236-4956 Panel Ar-Control
| 23***48 | Panel Group-Control; -Generator Start | 1 |
| 23***50 | Bracket | 2 |
| 23***56 | Panel Ar-Control | 1 |
236-4958 Panel Ar-Control -Generator Start, Dual
| 23***48 | Panel Group-Control; -Generator Start | 1 |
| 23***50 | Bracket | 2 |
| 23***58 | Panel Ar-Control; -Generator Start, Dual | 1 |
236-4955 Panel Ar-Control
| 22***37 | Fuse; (63-Ampere) | 5 |
| 23***55 | Panel Ar-Control | 1 |
| 24***15 | Panel Group-Electrical; -Converter Module | 3 |
256-6471 Panel As-Electrical
| 24***11 | Relay-Time Delay; (Back Feed Circuit) | 1 |
| 24***12 | Socket | 1 |
| 24***63 | Clip | 1 |
245-1678 Panel As-Electrical
| 24***22 | Board As-Circuit | 1 |
| 24***23 | Board As-Circuit | 2 |
| 24***78 | Panel As-Electrical | 1 |
244-7547 Panel As-Electrical
| 24***47 | Panel As-Electrical | 1 |
| 24***39 | Cleat; (Base) | 2 |
244-4990 Panel As-Electrical
| 23***48 | Panel Group-Control; -Generator Start | 2 |
| 23***50 | Bracket | 4 |
| 24***90 | Panel As-Electrical | 1 |
287-6148 Panel As-Electrical -Neutral Fuse
| 20***01 | Transformer; (230-Volt) | 1 |
| 24***21 | Transformer; (630-Volt) | 1 |
| 24***41 | Thermistor; (10-Ampere)(10-Ampere) | 2 |
245-2872 Panel As-Electrical
| 20***03 | Transformer; (230-Volt) | 1 |
| 24***91 | Thermistor; (10-Ohm) | 1 |
| 24***39 | Cleat; (Base) | 2 |
245-0563 Panel As-Electrical
| 20***66 | Fuse; (7-Ampere) | 2 |
| 24***03 | Fuse; (30-Ampere) | 3 |
| 24***07 | Plate | 2 |
256-6477 Panel As-Electrical
| 23***65 | Board As-Circuit | 1 |
| 24***07 | Headliner | 3 |
| 24***22 | Board As-Circuit | 1 |
294-2079 Panel As-Electrical
| 24***62 | Diode As; (Bridge) | 1 |
| 24***37 | Fuse Group; -Inverter, Neutral | 6 |
| 29***79 | Panel As-Electrical | 1 |
294-2918 Panel As-Electrical
| 26***74 | Resistor As | 3 |
| 29***81 | Fuse Group | 1 |
| 29***18 | Panel As-Electrical | 1 |
256-6478 Panel As-Electrical
| 20***01 | Transformer; (230-Volt) | 2 |
| 24***41 | Thermistor; (10-Ampere)(10-Ampere) | 2 |
| 25***73 | Block As; (Thermal Switch) | 1 |
233-7648 Panel Gp-Control -Generator Start
| 23***48 | Panel Group-Control; -Generator Start | 1 |
| 23***53 | Capacitor | 2 |
| 23***56 | Circuit Breaker As; (25-Ampere) | 1 |
245-0562 Panel Gp-Electrical
| 24***55 | Bar-Bus; (Ground) | 1 |
| 24***62 | Panel Group-Electrical | 2 |
| 24***63 | Panel As-Electrical | 1 |
244-7565 Panel Gp-Electrical
| 24***41 | Panel Group-Electrical | 1 |
| 24***65 | Panel Group-Electrical | 2 |
| 24***67 | Bus Bar As | 1 |
240-2515 Panel Gp-Electrical -Converter Module
| 24***15 | Panel Group-Electrical; -Converter Module | 1 |
| 26***36 | Board As; (Field Coil Driver) | 2 |
244-4998 Panel Gp-Electrical
| 24***88 | Filter As-Electrical | 1 |
| 24***89 | Contactor Group | 1 |
| 24***90 | Panel As-Electrical | 1 |
312-8583 Panel Gp-Electrical
| 20***02 | Transformer; (230-Volt) | 4 |
| 24***21 | Transformer; (630-Volt) | 1 |
| 24***41 | Thermistor; (10-Ampere)(10-Ampere) | 5 |
244-7555 Panel Gp-Electrical
| 24***36 | Panel Group-Electrical | 1 |
| 24***69 | Base As | 1 |
| 24***45 | Frame As | 1 |
244-7541 Panel Gp-Electrical
| 24***27 | Board As-Circuit | 1 |
| 24***41 | Panel Group-Electrical | 1 |
| 29***95 | Block As-Terminal | 1 |
244-4983 Panel Gp-Electrical
| 20***31 | Switch-Push Button; (Emergency Module Off) | 1 |
| 22***40 | Cover; (Secondary Stop) | 1 |
| 24***99 | Display | 1 |
244-7562 Panel Gp-Electrical
| 24***51 | Panel; (Front) | 1 |
| 24***29 | Switch-Push Button; (Transformer Temperature Status) | 1 |
| 24***62 | Panel Group-Electrical | 2 |
259-1395 Panel Gp-Electrical
| 24***72 | Panel Group-Electrical | 1 |
| 24***06 | Bus Bar Group | 1 |
| 25***95 | Panel Group-Electrical | 1 |
279-3994 Panel Gp-Electrical -Fuse
| 24***72 | Panel Group-Electrical | 1 |
| 24***06 | Bus Bar Group | 1 |
| 25***85 | Panel Group-Circuit Breaker | 1 |
244-7604 Panel Gp-Electrical
| 24***74 | Transducer; (1000-Ampere) | 4 |
| 24***01 | Baffle As-Air Flow | 2 |
| 24***04 | Panel Group-Electrical | 1 |
244-4984 Panel Gp-Electrical
| 23***64 | Board As-Circuit | 1 |
| 24***09 | Block-Terminal; (4-Pole) | 1 |
| 24***07 | Transformer As; (1-Va) | 6 |
243-3780 Panel Gp-Electrical
| 24***06 | Switch-Disconnect; (3-Pole, 400-Amp, Fusible) | 1 |
| 24***10 | Shaft | 1 |
| 24***15 | Contact | 1 |
244-4986 Panel Gp-Electrical
| 19***99 | Fuse; (10-Ampere) | 2 |
| 20***66 | Fuse; (7-Ampere) | 2 |
| 20***67 | Fuse; (1-Ampere) | 2 |
244-7570 Panel Gp-Electrical
| 24***43 | Bar-Bus | 1 |
| 24***44 | Bar-Bus | 1 |
| 24***45 | Bar-Bus | 1 |
243-3791 Panel Gp-Electrical
| 24***08 | Block | 1 |
| 24***22 | Board As-Circuit | 1 |
| 24***74 | Board As-Circuit | 1 |
240-1898 Panel Gp-Electrical
| 23***53 | Capacitor | 2 |
| 23***57 | Fuse; (0.25-Ampere) | 2 |
| 23***59 | Relay; (24-Volt)(Control Panel) | 2 |
289-4941 Panel Gp-Electrical
| 20***70 | Fuse; (4-Ampere) | 1 |
| 24***05 | Block | 1 |
| 28***41 | Panel Group-Electrical | 1 |
245-0889 Panel Gp-Electrical
| 24***61 | Fuse; (1000-Ampere) | 1 |
| 24***14 | Module As; -Solid-State Switch | 1 |
| 24***61 | Filter As-Electrical; (Capacitor) | 1 |
244-4987 Panel Gp-Electrical
| 24***87 | Panel Group-Electrical | 2 |
| 24***91 | Fan Group-Circulating | 1 |
| 24***94 | Filter As-Electrical | 1 |
245-0539 Panel Gp-Electrical
| 24***34 | Transformer As | 1 |
| 24***37 | Fuse Group; -Static Switch | 1 |
| 24***39 | Panel Group-Electrical | 2 |
243-3781 Panel Gp-Electrical
| 24***91 | Thermistor; (10-Ohm) | 1 |
| 24***99 | Diode | 1 |
| 24***01 | Block; (Terminal End)(Fuse) | 5 |
243-3793 Panel Gp-Electrical
| 23***66 | Board As-Circuit | 1 |
| 24***93 | Panel Group-Electrical | 1 |
244-4980 Panel Gp-Electrical
| 24***63 | Module Group-Converter | 1 |
| 24***92 | Module Group-Converter | 1 |
| 24***98 | Panel Group-Electrical | 1 |
244-7572 Panel Gp-Electrical
| 24***03 | Fuse; (30-Ampere) | 2 |
| 24***04 | Block-Fuse; (2-Pole) | 1 |
| 24***72 | Panel Group-Electrical | 1 |
243-3795 Panel Gp-Electrical
| 24***07 | Handle | 1 |
| 24***18 | Panel | 1 |
| 24***29 | Switch-Push Button; (Transformer Temperature Status) | 1 |
244-4985 Panel Gp-Electrical
| 20***65 | Fuse; (4-Ampere) | 3 |
| 23***72 | Transformer; (10-Ampere) | 1 |
| 24***01 | Block; (Terminal End)(Fuse) | 4 |
245-2805 Panel Gp-Electrical
| 24***91 | Thermistor; (10-Ohm) | 1 |
| 24***22 | Transformer | 1 |
| 24***05 | Panel Group-Electrical | 1 |
243-3779 Panel Gp-Electrical
| 24***79 | Panel Group-Electrical | 1 |
| 24***99 | Board As-Circuit | 1 |
289-4942 Panel Gp-Electrical
| 23***65 | Board As-Circuit | 1 |
| 24***07 | Headliner | 3 |
| 24***22 | Board As-Circuit | 1 |
245-0530 Panel Gp-Electrical
| 24***82 | Block-Terminal | 2 |
| 24***46 | Fuse; (3.15-Ampere) | 5 |
| 24***52 | Fuse; (15-Ampere) | 1 |
244-7574 Panel Gp-Electrical
| 20***65 | Fuse; (4-Ampere) | 2 |
| 24***04 | Block-Fuse; (2-Pole) | 1 |
| 24***74 | Panel Group-Electrical | 1 |
253-8959 Panel Gp-Electrical
| 19***99 | Fuse; (10-Ampere) | 2 |
| 20***65 | Fuse; (4-Ampere) | 2 |
| 20***01 | Transformer; (230-Volt) | 2 |
245-1220 Panel Gp-Electrical
| 24***56 | Board As-Circuit | 1 |
| 24***20 | Panel Group-Electrical | 1 |
245-2871 Panel Gp-Electrical
| 24***66 | Bus Bar Group | 1 |
| 24***68 | Circuit Breaker & Mounting Group | 1 |
| 24***69 | Bus Bar Group | 1 |
244-8746 Panel Gp-Electrical
| 24***74 | Transducer; (1000-Ampere) | 4 |
| 24***01 | Baffle As-Air Flow | 2 |
| 24***46 | Panel Group-Electrical | 1 |
244-4504 Panel Gp-Electrical
| 22***36 | Board As-Circuit; (Dc Interface) | 1 |
| 24***45 | Resistor | 4 |
| 24***04 | Panel Group-Electrical | 1 |
244-7559 Panel Gp-Electrical
| 24***09 | Block-Terminal; (4-Pole) | 1 |
| 24***43 | Bar-Bus | 1 |
| 24***44 | Bar-Bus | 1 |
245-0888 Panel Gp-Electrical
| 19***99 | Fuse; (10-Ampere) | 2 |
| 23***32 | Relay; (1.8-Ampere, 3-Pole)(Overload) | 1 |
| 23***34 | Block-Terminal | 1 |
240-2736 Panel Gp-Electrical
| 24***67 | Capacitor; (1200-Volt) | 2 |
| 24***68 | Capacitor; (500-Volt) | 4 |
| 24***22 | Shroud | 1 |
245-0540 Panel Gp-Electrical
| 24***40 | Panel Group-Electrical | 2 |
244-7602 Panel Gp-Electrical
| 23***65 | Board As-Circuit | 1 |
| 24***05 | Block-Fuse; (3-Pole) | 1 |
| 24***53 | Fuse; (1-Ampere) | 3 |
245-8339 Panel Gp-Power Supply
| 24***11 | Handle; (Door) | 1 |
| 24***16 | Screen; (Front) | 2 |
| 24***24 | Ring | 1 |
244-7577 Panel Gp-Power Supply
| 24***79 | Enclosure Group-Power Supply | 1 |
| 24***81 | Enclosure Group-Power Supply | 1 |
| 24***82 | Enclosure Group-Power Supply | 1 |
245-1234 Panel Gp-Power Supply
| 24***29 | Enclosure Group-Power Supply | 1 |
| 24***30 | Panel Group-Electrical | 1 |
| 24***34 | Panel Group-Power Supply | 1 |
257-4953 Panel Gp-Power Supply
| 24***37 | Panel Group-Power Supply | 1 |
| 25***53 | Panel Group-Power Supply | 1 |
| 25***01 | Panel Group-Power Supply; (Bottom Cable Entry) | 1 |
245-8341 Panel Gp-Power Supply
| 24***41 | Panel Group-Power Supply | 1 |
| 25***53 | Panel Group-Power Supply | 1 |
237-9614 Panel Gp-Power Supply
| 23***14 | Panel Group-Power Supply | 1 |
| 24***37 | Panel Group-Power Supply | 1 |
| 25***95 | Panel Group-Electrical | 1 |
290-3815 Panel Gp-Power Supply
| 24***11 | Handle; (Door) | 1 |
| 24***16 | Screen; (Front) | 2 |
| 24***24 | Ring | 1 |
237-9361 Panel Gp-Power Supply
| 23***61 | Panel Group-Power Supply | 1 |
| 24***01 | Panel Group-Power Supply | 2 |
245-0569 Panel Gp-Power Supply
| 24***56 | Enclosure Group-Power Supply | 1 |
| 24***84 | Enclosure Group-Power Supply | 1 |
| 24***69 | Panel Group-Power Supply | 1 |
237-9609 Panel Gp-Power Supply
| 23***09 | Panel Group-Power Supply | 1 |
| 24***01 | Panel Group-Power Supply | 4 |
257-8452 Panel Gp-Power Supply
| 24***11 | Handle; (Door) | 1 |
| 24***16 | Screen; (Front) | 2 |
| 24***24 | Ring | 1 |
253-8962 Panel Gp-Power Supply
| 24***81 | Enclosure Group-Power Supply | 1 |
| 25***62 | Panel Group-Power Supply | 1 |
245-2762 Panel Gp-Power Supply
| 24***08 | Conduit Group | 1 |
| 24***96 | Enclosure Group-Power Supply | 1 |
| 24***04 | Panel Group-Electrical | 1 |
244-4501 Panel Gp-Power Supply
| 24***01 | Panel Group-Power Supply | 1 |
| 24***97 | Enclosure Group-Power Supply | 1 |
| 25***59 | Module Group-Alarm | 1 |
294-2969 Panel Gp-Power Supply
| 24***11 | Handle; (Door) | 1 |
| 24***16 | Screen; (Front) | 2 |
| 24***26 | Filter Element-Encl Air | 2 |
259-7070 Panel Gp-Power Supply
| 24***11 | Handle; (Door) | 1 |
| 24***16 | Screen; (Front) | 2 |
| 24***26 | Filter Element-Encl Air | 2 |
259-8401 Panel Gp-Power Supply
| 24***01 | Panel Group-Power Supply | 1 |
| 25***01 | Panel Group-Power Supply | 1 |
237-9362 Panel Gp-Power Supply
| 23***62 | Panel Group-Power Supply | 1 |
| 24***01 | Panel Group-Power Supply | 3 |
246-2037 Panel Gp-Power Supply
| 24***37 | Panel Group-Power Supply | 1 |
| 25***52 | Panel Group-Power Supply | 1 |
245-8340 Panel Gp-Power Supply
| 24***40 | Panel Group-Power Supply | 1 |
| 25***79 | Enclosure Group-Power Supply | 1 |
| 25***01 | Panel Group-Power Supply | 1 |
253-8961 Panel Gp-Power Supply
| 24***62 | Panel Group-Power Supply | 1 |
| 24***67 | Enclosure Group-Power Supply | 1 |
| 25***61 | Panel Group-Power Supply | 1 |
294-2893 Panel Gp-Power Supply -Circuit Breaker, 4-Pole, 4-Wire
| 24***11 | Handle; (Door) | 2 |
| 24***16 | Screen; (Front) | 1 |
| 24***23 | Plate; (Rear) | 1 |
237-9360 Panel Gp-Power Supply
| 23***60 | Panel Group-Power Supply | 1 |
| 24***81 | Enclosure Group-Power Supply | 1 |
| 25***53 | Panel Group-Power Supply | 1 |
244-5000 Panel Gp-Power Supply
| 24***31 | Panel | 1 |
| 24***55 | Plate | 1 |
| 24***24 | Board As-Circuit | 2 |
237-9348 Power Gp-Uninterruptible
| 23***48 | Power Group-Uninterruptible | 1 |
| 24***00 | Panel Group-Power Supply | 1 |
| 24***77 | Panel Group-Power Supply | 1 |
294-3381 Power Gp-Uninterruptible -3-Pole, 4-Wire
| 24***69 | Panel Group-Power Supply | 1 |
| 24***34 | Panel Group-Power Supply | 1 |
| 24***39 | Panel Group-Power Supply | 1 |
263-3331 Power Gp-Uninterruptible
| 24***00 | Panel Group-Power Supply | 1 |
| 24***77 | Panel Group-Power Supply | 1 |
| 24***69 | Panel Group-Power Supply | 1 |
237-9347 Power Gp-Uninterruptible
| 23***47 | Power Group-Uninterruptible | 1 |
| 24***79 | Enclosure Group-Power Supply | 1 |
| 24***81 | Enclosure Group-Power Supply | 1 |
243-3784 Power Supply Gp
| 24***84 | Power Supply Group | 1 |
| 24***69 | Panel Group-Power Supply | 1 |
| 24***34 | Panel Group-Power Supply | 1 |
231-3504 Pump & Motor Gp-Vacuum
| 20***32 | Power Supply; (350-Watt) | 1 |
| 23***04 | Pump & Motor Group-Vacuum | 1 |
| 23***88 | Capacitor; (450-Volt) | 2 |
Service Equipment And Supplies
282-3515 Parts Gp-Miscellaneous -Parallel Controls
| 24***11 | Relay-Time Delay; (Back Feed Circuit) | 1 |
| 27***56 | Board As-Circuit | 1 |
| 28***15 | Parts Group-Miscellaneous; -Parallel Controls | 1 |
282-3516 Parts Gp-Miscellaneous -Separate Maintenance Bypass
| 18***61 | Fuse; (5-Ampere) | 20 |
| 19***71 | Fuse; (63-Ampere) | 1 |
| 19***99 | Fuse; (10-Ampere) | 10 |
244-8664 Parts Gp-Miscellaneous
| 18***61 | Fuse; (5-Ampere) | 20 |
| 19***71 | Fuse; (63-Ampere) | 5 |
| 19***99 | Fuse; (10-Ampere) | 10 |
Parts Group-Miscellaneous
| 20***70 | Fuse; (4-Ampere) | 3 |
| 24***11 | Relay-Time Delay; (Back Feed Circuit) | 1 |
| 24***28 | Board As-Circuit | 1 |
282-3513 Parts Gp-Miscellaneous -Parallel Maintenance Bypass
| 18***61 | Fuse; (5-Ampere) | 20 |
| 19***71 | Fuse; (63-Ampere) | 5 |
| 19***97 | Fuse; (3-Ampere) | 10 |
244-8663 Parts Gp-Miscellaneous
| 18***46 | Kit-Pump; (Vacuum) | 1 |
| 24***65 | Ring | 4 |
| 24***00 | Connector | 1 |
282-3512 Parts Gp-Miscellaneous -Base Unit Configuration, 4-Wire
| 18***56 | Fuse; (30-Ampere)(Output) | 2 |
| 19***99 | Fuse; (10-Ampere) | 2 |
| 20***32 | Power Supply; (350-Watt) | 1 |
UPS1000S serial number reference
On Cat UPS/flywheel power-supply cabinets the nameplate sits on the front or rear access panel of the enclosure/frame assembly, usually near the control or operator station panel rather than on an engine block. It lists the Product Identification Number as a 3-letter prefix followed by a sequence number (e.g. CZS1-up or CZE00001-up); read the letters against the parts or service manual's model-code table for this specific rating, since sibling ratings sharing one combined manual can carry their own distinct prefix rather than a common one.
| Prefix | Identifies | Notes |
|---|---|---|
| CZS | UPS1000S (paired with the ES12F flywheel cabinet frame) | Serial break CZS1-UP applies to the ES12F frame assembly's electrical control panel on the UPS1000S rating. Sibling prefix CZT1-UP on the same attachment family belongs to the larger UPS1200S rating, not this one; both ratings share one combined parts/service manual (SEBP4040 series) but keep separate serial breaks. This is the primary UPS1000S-specific prefix. |
| CZE | Shared bundle range - confirm with dealer | Umbrella serial-number break (CZE00001-UP) shown on catalog pages covering the shared ES12F frame across both the UPS1000S and UPS1200S ratings - may be a base-chassis range rather than a rating-specific break. Confirm which unit this range actually nameplates with your dealer before relying on it. |
Frequently asked questions
What engine does the Cat UPS1000S use?
None. The UPS1000S has no internal combustion engine. It is a flywheel-based static UPS module - a motor/generator paired with a sealed, spinning flywheel and an IGBT power-electronics cabinet - that bridges the load electrically until a separate standby generator, if installed, comes online.
What is the operating weight of the UPS1000S?
Not published for this exact 1000 kVA rating. Sibling single-module cabinets in the same family run from roughly 4,200 kg (about 9,350 lb) for the 750 kVA unit up into several-thousand-kilogram territory for larger multi-cabinet 1200 kVA systems, so weight varies by configuration - confirm the exact figure against the nameplate or with your dealer.
What replaced the UPS1000S?
There was no direct one-for-one replacement; the lineup grew sideways instead. Later single-module cabinets moved to contactless magnetic-bearing flywheels for lower maintenance, and the separate Z-series (300Z through 1200Z) offers a parallel, multi-module topology for scalable capacity - a different architecture rather than a straight successor to the 1000S.
What UPS1000S owners discuss
Is the UPS1000S actually a diesel engine-generator?
No. Despite showing up filed next to genset literature, the UPS1000S is the flywheel-based uninterruptible power supply module: a motor/generator paired with a sealed flywheel and a power electronics cabinet, not a standalone diesel engine. It sits in the roughly 1000 kVA tier alongside its 1200S sibling in the same catalog family. In a full backup power system it works next to a separate diesel generator set - the flywheel bridges the gap between a utility outage and the generator coming online, it does not burn fuel itself. Treat any spec sheet that lists cylinders, bore, or fuel consumption for this unit as belonging to the paired genset, not the UPS module itself.
How long does the flywheel actually ride through an outage before the generator has to pick up load?
Community and technical writeups on this flywheel UPS class describe a short bridging window, commonly quoted in the single digits up to roughly 10-15 seconds depending on connected load and configuration - enough to cover a utility sag or a normal generator start/transfer sequence, not an extended outage. Exact ride-through time varies by loading and by series, so treat any single number as a starting point and confirm against the nameplate and load calc for the specific installation rather than assuming one fixed figure.
What wears out first on these flywheel UPS units - is it really "maintenance-free"?
It is low-maintenance compared with a battery UPS, not zero-maintenance. The two wear items owners and techs flag most are the vacuum pump that maintains the low-pressure chamber around the spinning flywheel (commonly cited service life in the 8-10 year range) and the bearing set supporting the flywheel shaft. Units with mechanical bearings need periodic lubrication and bearing replacement, often cited around every 5-8 years; later designs using magnetic/contactless bearings cut that wear item way down since there is no physical contact in normal running. Routine checks are vacuum gauge/oil level, visual inspection for leaks or damage, and reviewing fault history on the operator interface. Because the flywheel stores significant kinetic energy at speed, have your dealer verify bearing and vacuum system condition before returning a long-idle unit to service.
What actually fails electrically on this equipment - is it the flywheel or something else?
Owners and techs report the power electronics section - the rectifier/inverter power modules and the control/logic board - as the more common fault point, not the mechanical flywheel itself. Typical triggers are overcurrent or overtemperature events (blocked cooling, degraded heat sinks), aging DC bus capacitors that lose capacitance gradually before failing, and control-board faults from component aging or firmware issues. A fault code pointing at the inverter or rectifier stage should be diagnosed at the electronics cabinet first before assuming a flywheel or bearing problem.
Can a field tech pull the flywheel assembly apart for service?
No. Removal and installation of the flywheel assembly is not treated as a field service task in the documentation for this product line - it is factory/dealer-level work. The flywheel spins at high speed inside a sealed, evacuated housing, and opening that housing outside of a proper service procedure is both a warranty issue and a safety issue given the stored rotational energy. Any suspected internal flywheel or magnetic-bearing fault should go to Cat dealer service rather than being opened in the field. Have your dealer verify before any attempt to service the flywheel enclosure.
The parts catalog also lists an S-series and a Z-series Cat UPS - are those the same product as the UPS1000S?
No, and mixing up the two families is a common research mistake. The S-series (which includes this UPS1000S and its UPS1200S sibling) is a single-module, line-interactive flywheel UPS sized for one power rating per unit. The Z-series is a different, later multi-module system built from smaller kVA blocks that can be paralleled together for scalable, redundant capacity - its literature covers different building-block ratings and cannot be assumed to apply to the UPS1000S's own spec sheet. Keep spec pulls, maintenance intervals, and topology notes separated by series rather than borrowing numbers across them.
What should I check before buying a used UPS1000S?
Get the maintenance history first: how many running hours/years on the vacuum pump and bearing set, and whether they are within or past the commonly cited service windows (vacuum pump around 8-10 years, mechanical bearings around 5-8 years). Ask whether the flywheel chamber has held vacuum during any idle/storage period - a unit sitting unused for a long time may need dealer recommissioning before it can hold optimum vacuum again at speed. Get a run/spin test and a review of the operator interface fault log rather than relying on a visual check alone. Confirm overall unit age against the general 15-20 year expected service life quoted for this class of flywheel UPS, and don't assume remaining life just because the cabinet looks clean. Given the stored kinetic energy in a spinning flywheel, have your dealer verify bearing, vacuum, and control electronics condition before commissioning a used unit into service.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific UPS1000S part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.