Caterpillartillagefield cultivator
Caterpillar TL5 30
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar TL5 30 is a towed, S-shank field cultivator built for primary and secondary seedbed preparation. It carries no engine, hydraulic tank, transmission, undercarriage, or onboard electronics of its own; all power comes from a separate towing tractor's engine, draft, and hydraulic remotes for depth control and wing fold. It belongs to Caterpillar's TL5 sized field-cultivator lineup, spanning TL5 30 through TL5 50 (30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50), with each number denoting a different working width or frame size on a shared shank-and-frame architecture. Operating weight, overall dimensions, and production years for this specific TL5 30 are not publicly documented; confirm these details from the machine's data plate or a Cat dealer rather than assume figures from adjacent sizes in the lineup.
Across the TL5 sized lineup, siblings differ mainly in working width, shank count, and frame reinforcement needed to handle the added draft load of a wider tool, not in a fundamentally different design. Wing-fold frames, shank spacing, and trip-mechanism tuning scale with size, so parts are not universally interchangeable between a TL5 30 and a larger sibling without verifying frame and shank-mount specifics. Even with thin public spec data on this exact model, parts support matters in the used market: shanks, points, trip springs, hitch bushings, and hydraulic cylinders wear out on a predictable cycle and drive most of the aftermarket demand for these implements, since the frame itself typically outlasts several rounds of wear-part replacement.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar TL5 30 specifications
Engine
| Engine | Not applicable. The TL5 30 is a pull-type tillage implement (S-tine field cultivator) with no onboard engine. It is towed and powered by a separate tractor. |
| Gross/net power | Not applicable — implement has no engine of its own. |
| Displacement / cylinders | Not applicable. |
| Emissions tier | Not applicable — no engine, no emissions certification. |
Weights
| Operating weight | Not documented in publicly available literature for this model. |
| Shipping weight | Not documented in publicly available literature for this model. |
| Ground pressure | Not published — not a relevant spec for a towed tillage implement. |
Dimensions
| Transport length | Not documented in publicly available literature for this model. |
| Transport width | Not documented in publicly available literature for this model. |
| Transport height | Not documented in publicly available literature for this model. |
| Working width | Not documented — the TL5 30 belongs to a sized family of S-tine field cultivators (alongside TL5 32, TL5 34, TL5 38, TL5 40, TL5 42, TL5 50), and the number in the model designation likely correlates to working width or frame size, but no source ties a specific width figure to the TL5 30 by name. Do not assume a value. |
| Wheelbase / track gauge | Not applicable in the sense used for self-propelled machines — implement uses transport wheels/axles rather than a chassis wheelbase; figures not documented. |
| Ground clearance | Not documented in publicly available literature for this model. |
Performance
| Travel speed | Not documented. As a towed implement, travel/field speed depends on the pulling tractor and is not published as a TL5 30 machine spec. |
| Drawbar / pull requirement | Not documented in publicly available literature for this model. |
| Gradeability | Not published — not a relevant spec for this implement type. |
Service capacities (summary)
| Fuel tank | Not applicable — no engine. |
| Hydraulic system | Not documented. Field cultivators of this type may use tractor-supplied hydraulics for fold/lift functions, but no capacity figures are published for the TL5 30 specifically. |
| Engine oil | Not applicable — no engine. |
| Cooling system | Not applicable — no engine. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
TL5 30 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not applicable | The TL5 30 is a pull-type S-shank tillage tool with no onboard engine. It is towed and powered entirely by the operating tractor, so no engine oil chart applies to the implement itself. |
| Cooling system | Not applicable | No engine, so no coolant system exists on the implement. |
| Fuel tank | Not applicable | No engine, so no fuel tank exists on the implement. |
| Transmission/powertrain compartment | Not applicable | The implement has no transmission, transfer case, or powershift compartment. Ground drive, where fitted, is limited to free-rolling gauge/depth wheels. |
| Final drives | Not applicable | No final drive housings are fitted to this implement. |
| Hydraulic system and tank | No dedicated reservoir on the implement | Depth-control, wing-fold, and shank-reset cylinders on the TL5 30 draw hydraulic power from the towing tractor's remote hydraulic outlets. There is no implement-mounted hydraulic tank, so no separate fill capacity or fluid spec is published for the tillage tool itself; hydraulic fluid type and capacity follow the towing tractor's own operation and maintenance manual. |
| Axles/differentials | Not applicable | No axle or differential housings are fitted; gauge and depth wheels use sealed or greasable hub bearings only. |
| Grease (spec only) | Spec only, no fill capacity published | Grease points at shank pivots, gauge/depth wheel hub bearings, wing-fold hinges, and the hitch/drawbar pin call for a general-purpose NLGI Grade 2 multipurpose chassis grease, consistent with Caterpillar's standard multipurpose grease recommendation used across its ground-engaging and towed tillage tool line. No model-specific viscosity-by-climate split is documented for this implement since it carries no engine or hydraulic tank of its own. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar TL5 30 maintenance schedule
| Service interval | Tasks |
|---|---|
| — |
|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
Servicing the TL5 30 beyond the schedule
Predictive Maintenance & Wear-Point Inspection
The TL5 30 has no engine oil or hydraulic tank to sample; predictive care means tracking wear on points, shovels, and trip-mechanism components against a measured baseline rather than lab fluid analysis. Check point thickness against service limit at each grease interval, log shank straightness, and inspect hydraulic hose and cylinder condition on the depth-control and wing-fold circuits your tractor supplies. Watery or discolored hydraulic fluid returning to the tractor reservoir, or a cylinder that drifts under load, signals a seal problem worth catching before a hose failure.
Corrective & Common Repairs
Most TL5 30 repairs center on the shank trip mechanism, bent shanks, and worn points. A shank that trips prematurely or won't reset usually points to a fatigued trip spring or worn pivot bushing; replace both as a pair rather than singly. Bent or twisted shanks from rock strikes should be straightened or replaced outright if cracked at the mount. Worn points and shovels reduce penetration and fuel efficiency for the towing tractor, so swap them before they reach the wear limit rather than after performance drops.
Overhaul & Rebuild Points
Overhaul on the TL5 30 targets the main frame, wing-fold hinges, and hitch tongue rather than any internal driveline, since it has none. Inspect gusset welds and frame junctions for stress cracking from years of draft loading, and replace hinge pins and bushings as a set once play develops at the wing-fold joints. Hitch clevis and pin bushings elongate over time and should be rebuilt before towing slop turns into a road-transport hazard. Shank mounts and clamp hardware are the other recurring wear points at rebuild time.
Seasonal & Environment Servicing
Before the season starts, grease every pivot and hinge point, torque-check frame and shank hardware, and inspect hydraulic hoses for cracking from winter storage. At season's end, fully retract wing sections, relieve hydraulic pressure, and grease heavily as a corrosion barrier before parking outdoors or under cover. Store on level ground with the frame supported to avoid stress on the hitch tongue, and touch up bare metal on the frame to prevent rust from taking hold over winter layup.
TL5 30 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 9S-8752 | Nut-Full | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
TL5 30 attachments & work tools
Ground-engaging tool / shank system
The TL5 30 uses an S-shank style tillage tool. Its shank-and-point assembly is documented together with the TL5 34 within the same tillage parts family as the larger TL5 40, indicating a shared tool design across these frame sizes. Exact tine count and row spacing for the TL5 30 are not published in open sources — confirm against the serial-specific parts book.
Points and wear tips
Replaceable ground points or sweeps mount to the S-shanks and are sized to match the shank and frame combination. No published point or sweep size list specific to the TL5 30 was found; wear parts should be matched by physical shank fit rather than by model number alone.
Hitch and mounting to tow tractor
This is a pull-type tillage implement coupled to a tractor drawbar rather than a machine-mounted work tool; no quick-coupler or category-rated three-point linkage is documented for this size in available sources. Hitch geometry should be matched to the towing tractor class actually pulling the TL5 30.
Hydraulic requirements
Depth control and any lift or fold functions on this class of pull-type shank tool are normally powered from the towing tractor's remote hydraulic outlets rather than an onboard power pack. Circuit count and cylinder sizing specific to the TL5 30 are not documented publicly — verify against the applicable parts manual before ordering hydraulic components.
Frame and size class
The TL5 30 sits at the narrower end of the TL5 tillage/field-cultivator lineup, which also includes the 34 and larger sizes. TL5 30 and TL5 34 share the same S-shank tool assembly per the parts documentation, while wider siblings step up in frame width and shank count — treat those larger sizes as a distinct configuration, not a spec source for the TL5 30.
Guarding and transport setup
Pull-type shank tillage tools in this class typically ship with transport locks or stands and shank shielding for road travel between fields. No TL5 30-specific guarding or transport option list is published; confirm current factory options with a dealer.
All TL5 30 assemblies by section
Every catalogued assembly group for the Caterpillar TL5 30. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Electrical System
211-4815 Lighting Gp-Roading -Transport
| 20***75 | Lockwasher | 4 |
| 20***33 | Washer | 4 |
| 20***24 | Bolt-Grade 5 | 12 |
Frame And Body
209-4793 Adjustment Gp-Depth -Ratchet Jack
| 1J***36 | Pin-Spring; (Spring) | 4 |
| 20***59 | Lockwasher | 1 |
| 20***75 | Lockwasher | 6 |
209-2451 Cultivator Ar -Tl5 34
| 20***51 | Cultivator Ar; -Tl5 34 | 1 |
| 20***56 | Frame Ar; -Tl5 32,34 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2450 Cultivator Ar -Tl5 32
| 20***50 | Cultivator Ar; -Tl5 32 | 1 |
| 20***56 | Frame Ar; -Tl5 32,34 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2457 Cultivator Ar -Tl5 46
| 20***57 | Cultivator Ar; -Tl5 46 | 1 |
| 20***62 | Frame Ar; -Tl5 44,46 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2458 Cultivator Ar -Tl5 48
| 20***58 | Cultivator Ar; -Tl5 48 | 1 |
| 20***64 | Frame Ar; -Tl5 48,50 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2459 Cultivator Ar -Tl5 50
| 20***59 | Cultivator Ar; -Tl5 50 | 1 |
| 20***64 | Frame Ar; -Tl5 48,50 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2449 Cultivator Ar -Tl5 30
| 20***49 | Cultivator Ar; -Tl5 30 | 1 |
| 20***55 | Frame Ar; -Tl5 30 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2454 Cultivator Ar -Tl5 40
| 20***54 | Cultivator Ar; -Tl5 40 | 1 |
| 20***60 | Frame Ar; -Tl5 40,42 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2456 Cultivator Ar -Tl5 44
| 20***56 | Cultivator Ar; -Tl5 44 | 1 |
| 20***62 | Frame Ar; -Tl5 44,46 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2452 Cultivator Ar -Tl5 36
| 20***52 | Cultivator Ar; -Tl5 36 | 1 |
| 20***58 | Frame Ar; -Tl5 36,38 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2453 Cultivator Ar -Tl5 38
| 20***53 | Cultivator Ar; -Tl5 38 | 1 |
| 20***58 | Frame Ar; -Tl5 36,38 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-2455 Cultivator Ar -Tl5 42
| 20***55 | Cultivator Ar; -Tl5 42 | 1 |
| 20***60 | Frame Ar; -Tl5 40,42 | 1 |
| 20***92 | Linkage Group-Implement; -Fore & Aft Adjustment | 1 |
209-5064 Extension Gp-Center Frame -(S-Shank) Tl5 42,46,50
| 20***59 | Lockwasher | 24 |
| 20***70 | Extension As; (10-In) | 4 |
| 20***71 | Extension As; (17-In) | 2 |
209-5062 Extension Gp-Center Frame -(S & C-Shank) Tl5 40,44,48
| 20***59 | Lockwasher | 16 |
| 20***75 | Extension As; (Front) | 4 |
| 20***76 | U-Bolt | 8 |
209-5060 Extension Gp-Center Frame -(C-Shank) Tl5 32,36
| 20***75 | Lockwasher | 8 |
| 20***72 | Extension As; (17 In) | 2 |
| 20***73 | Plate | 2 |
209-4783 Extension Gp-Center Frame -(C-Shank) Tl5 42,46,50
| 20***59 | Lockwasher | 24 |
| 20***75 | Lockwasher | 16 |
| 20***70 | Extension As; (10-In) | 4 |
209-5059 Extension Gp-Center Frame -(S-Shank) Tl5 30,34
| 20***59 | Lockwasher | 16 |
| 20***70 | Extension As; (10-In) | 2 |
| 20***71 | Extension As; (17-In) | 2 |
209-5055 Extension Gp-Center Frame -Tl5 30,34
| 20***59 | Lockwasher | 16 |
| 20***75 | Lockwasher | 8 |
| 20***70 | Extension As; (10-In) | 2 |
209-4779 Extension Gp-Center Frame -(S & C-Shank) Tl5 30,34
| 20***59 | Lockwasher | 24 |
| 20***70 | Extension As; (10-In) | 2 |
| 20***71 | Extension As; (17-In) | 2 |
209-5061 Extension Gp-Center Frame -(S-Shank) Tl5 38
| 20***59 | Lockwasher | 8 |
| 20***70 | Extension As; (10-In) | 2 |
| 20***61 | Extension Group-Center Frame; -(S-Shank) Tl5 38 | 1 |
209-4780 Extension Gp-Center Frame -(S & C-Shank) Tl5 32,36,38
| 20***59 | Lockwasher | 8 |
| 20***75 | Extension As; (Front) | 2 |
| 20***76 | U-Bolt | 4 |
209-4781 Extension Gp-Center Frame -(C-Shank) Tl5 38
| 20***59 | Lockwasher | 8 |
| 20***75 | Lockwasher | 8 |
| 20***70 | Extension As; (10-In) | 2 |
209-4782 Extension Gp-Center Frame -(C-Shank) Tl5 40,44,48
| 20***75 | Lockwasher | 16 |
| 20***72 | Extension As; (17 In) | 4 |
| 20***73 | Plate | 4 |
209-5063 Extension Gp-Center Frame -(C & S-Shank) Tl5 42,46,50
| 20***59 | Lockwasher | 32 |
| 20***70 | Extension As; (10-In) | 2 |
| 20***71 | Extension As; (17-In) | 2 |
209-4756 Frame Ar -Tl5 32,34
| 20***03 | Frame Group-Center | 1 |
| 20***52 | Hinge Group-Transport; -Center-Tl5 30,32,34 | 1 |
| 20***56 | Frame Ar; -Tl5 32,34 | 1 |
209-4764 Frame Ar -Tl5 48,50
| 20***03 | Frame Group-Center | 1 |
| 20***64 | Frame Ar; -Tl5 48,50 | 1 |
| 20***89 | Hinge Group-Transport; -Center-Tl5 36,38,40,42,44,46,48,50 | 1 |
209-4758 Frame Ar -Tl5 36,38
| 20***03 | Frame Group-Center | 1 |
| 20***53 | Frame Group-Folding; -Outer Wing-Tl5 36,38 | 1 |
| 20***58 | Frame Ar; -Tl5 36,38 | 1 |
209-4762 Frame Ar -Tl5 44,46
| 20***03 | Frame Group-Center | 1 |
| 20***62 | Frame Ar; -Tl5 44,46 | 1 |
| 20***89 | Hinge Group-Transport; -Center-Tl5 36,38,40,42,44,46,48,50 | 1 |
209-4755 Frame Ar -Tl5 30
| 20***03 | Frame Group-Center | 1 |
| 20***04 | Frame Group; -Inner Wing-Tl5 30,40,42 | 1 |
| 20***52 | Hinge Group-Transport; -Center-Tl5 30,32,34 | 1 |
209-4760 Frame Ar -Tl5 40,42
| 20***03 | Frame Group-Center | 1 |
| 20***04 | Frame Group; -Inner Wing-Tl5 30,40,42 | 1 |
| 20***60 | Frame Ar; -Tl5 40,42 | 1 |
209-4790 Frame Gp -Inner Wing-Tl5 32,34,36,38,44,46,48,50
| 20***59 | Lockwasher | 40 |
| 20***53 | Fitting-Grease | 4 |
| 20***59 | Frame As; (Rh Inner Wing) | 1 |
209-3704 Frame Gp -Inner Wing-Tl5 30,40,42
| 20***59 | Lockwasher | 40 |
| 20***53 | Fitting-Grease | 4 |
| 20***04 | Frame Group; -Inner Wing-Tl5 30,40,42 | 1 |
209-3703 Frame Gp-Center
| 20***59 | Lockwasher | 24 |
| 20***75 | Lockwasher | 2 |
| 20***33 | Washer | 2 |
209-5027 Frame Gp-Folding -Outer Wing-Tl5 40,42,44,46
| 1J***36 | Pin-Spring; (Spring) | 4 |
| 20***59 | Lockwasher | 24 |
| 20***37 | Lockwasher | 12 |
209-9367 Frame Gp-Folding -Outer Wing-Tl5 48,50
| 1J***36 | Pin-Spring; (Spring) | 4 |
| 20***59 | Lockwasher | 24 |
| 20***37 | Lockwasher | 12 |
209-4353 Frame Gp-Folding -Outer Wing-Tl5 36,38
| 1J***36 | Pin-Spring; (Spring) | 16 |
| 20***59 | Lockwasher | 16 |
| 20***37 | Lockwasher | 4 |
209-4352 Hinge Gp-Transport -Center-Tl5 30,32,34
| 20***59 | Lockwasher | 14 |
| 20***75 | Lockwasher | 2 |
| 20***33 | Washer | 2 |
209-4789 Hinge Gp-Transport -Center-Tl5 36,38,40,42,44,46,48,50
| 20***59 | Lockwasher | 14 |
| 20***75 | Lockwasher | 2 |
| 20***33 | Washer | 2 |
210-1050 Hitch Ar -Floating-Tl5 30
| 20***35 | Hitch Group; -Floating | 1 |
| 20***56 | Wheel Group-Gauge; -Front | 2 |
| 21***73 | Cylinder & Lines Group-Hitch; -Tl5 30 (Floating) | 1 |
209-2534 Hitch Gp -Self Leveling
| 1D***19 | Jam Nut, Hex., 3/4"-10 N.C. | 2 |
| 1J***36 | Pin-Spring; (Spring) | 6 |
| 20***75 | Lockwasher | 4 |
209-2535 Hitch Gp -Floating
| 1D***19 | Jam Nut, Hex., 3/4"-10 N.C. | 2 |
| 1J***36 | Pin-Spring; (Spring) | 8 |
| 20***59 | Lockwasher | 8 |
209-2536 Hitch Gp -Trailer
| 1K***70 | Nut (National Coarse) | 2 |
| 20***59 | Lockwasher | 2 |
| 20***75 | Lockwasher | 3 |
209-4792 Linkage Gp-Implement -Fore & Aft Adjustment
| 1J***36 | Pin-Spring; (Spring) | 8 |
| 20***75 | Lockwasher | 2 |
| 20***53 | Fitting-Grease | 2 |
209-4801 Stop Gp-Wing -Tl5 30,32,34
| 20***37 | Lockwasher | 8 |
| 20***74 | Bushing-Wear | 2 |
| 20***71 | U-Bolt | 4 |
214-9432 Stop Gp-Wing -Tl5 40,42,44,46
| 20***59 | Lockwasher | 8 |
| 20***37 | Lockwasher | 8 |
| 20***74 | Bushing-Wear | 2 |
209-4802 Stop Gp-Wing -Tl5 36,38
| 20***59 | Lockwasher | 4 |
| 20***37 | Lockwasher | 8 |
| 20***74 | Bushing-Wear | 4 |
209-4803 Stop Gp-Wing -Tl5 40,42,44,46,48,50
| 20***59 | Lockwasher | 8 |
| 20***37 | Lockwasher | 8 |
| 20***74 | Bushing-Wear | 2 |
209-5058 Wheel & Rocker Gp-Implement -Center Frame-Tl5 36,38,40,42,44,46,48,50
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 4 |
| 1J***36 | Pin-Spring; (Spring) | 5 |
209-5065 Wheel & Rocker Gp-Implement -Wing
| 00***69 | Cup-Roller Bearing | 5 |
| 00***71 | Cone-Bearing | 4 |
| 1J***36 | Pin-Spring; (Spring) | 4 |
209-5057 Wheel & Rocker Gp-Implement -Center Frame-Tl5 30,32,34
| 00***69 | Cup-Roller Bearing | 5 |
| 00***71 | Cone-Bearing | 4 |
| 1J***36 | Pin-Spring; (Spring) | 5 |
209-5056 Wheel Gp-Gauge -Front
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***90 | Cone-Roller Bearing | 1 |
Hydraulic System
210-0873 Cylinder & Lines Gp-Hitch -Tl5 30 (Floating)
| 03***43 | Adapter - 45 Degrees - 8 Valve Ports P, T, C1, C2 | 1 |
| 03***59 | Tee Stick Vent Valve Drain | 1 |
| 11***28 | Elbow; (90-Deg) | 1 |
211-0375 Cylinder & Lines Gp-Lift -Wheel-Tl5 36,38
| 03***70 | Tee | 2 |
| 11***28 | Elbow; (90-Deg) | 8 |
| 20***95 | Cylinder Group-Lift; (4 In Bore X 10 In Stroke)(Wheel)(Rephasing) | 2 |
211-4813 Cylinder & Lines Gp-Lift -Wheel-Tl5 48,50
| 03***70 | Tee | 2 |
| 11***28 | Elbow; (90-Deg) | 12 |
| 20***94 | Cylinder Group-Lift; (4.25 In Bore X 10 In Stroke)(Wheel)(Rephasing) | 2 |
211-4810 Cylinder & Lines Gp-Lift -Wheel-Tl5 40,42
| 03***70 | Tee | 2 |
| 11***28 | Elbow; (90-Deg) | 12 |
| 20***94 | Cylinder Group-Lift; (4.25 In Bore X 10 In Stroke)(Wheel)(Rephasing) | 2 |
211-4812 Cylinder & Lines Gp-Lift -Wheel-Tl5 44,46
| 03***70 | Tee | 2 |
| 11***28 | Elbow; (90-Deg) | 12 |
| 20***94 | Cylinder Group-Lift; (4.25 In Bore X 10 In Stroke)(Wheel)(Rephasing) | 2 |
211-3224 Cylinder & Lines Gp-Lift
| 03***70 | Tee | 2 |
| 11***28 | Elbow; (90-Deg) | 8 |
| 20***95 | Cylinder Group-Lift; (4 In Bore X 10 In Stroke)(Wheel)(Rephasing) | 2 |
211-0366 Cylinder & Lines Gp-Lift -Wheel-Tl5 32,34
| 03***70 | Tee | 2 |
| 11***28 | Elbow; (90-Deg) | 8 |
| 20***95 | Cylinder Group-Lift; (4 In Bore X 10 In Stroke)(Wheel)(Rephasing) | 2 |
211-0364 Cylinder & Lines Gp-Transport -Wing Fold-Tl5 36,38
| 03***59 | Tee Stick Vent Valve Drain | 1 |
| 03***70 | Tee | 1 |
| 06***08 | Bulkhead Tee | 1 |
211-0365 Cylinder & Lines Gp-Transport -Wing Fold-Tl5 40,42
| 03***59 | Tee Stick Vent Valve Drain | 1 |
| 03***70 | Tee | 1 |
| 06***08 | Bulkhead Tee | 1 |
211-4408 Cylinder & Lines Gp-Transport -Wing Fold-Tl5 44,46,48,50
| 03***59 | Tee Stick Vent Valve Drain | 1 |
| 03***70 | Tee | 1 |
| 06***08 | Bulkhead Tee | 1 |
211-0363 Cylinder & Lines Gp-Transport -Wing Fold-Tl5 30,32,34
| 06***08 | Bulkhead Tee | 1 |
| 11***28 | Elbow; (90-Deg) | 2 |
| 20***38 | Strap-Tie | 1 |
Implements
209-2532 Harrow Gp-Spike -Tl5 30 (3 Row/10 Arm)
| 20***59 | Lockwasher | 40 |
| 20***06 | Locknut | 70 |
| 20***04 | Bolt-Grade 5 | 20 |
209-2533 Harrow Gp-Spike -Tl5 30 (5 Row/10 Arm)
| 20***59 | Lockwasher | 40 |
| 20***06 | Locknut | 110 |
| 20***04 | Bolt-Grade 5 | 20 |
211-3239 Harrow Gp-Spike -Tl5 38 (3 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 84 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3243 Harrow Gp-Spike -Tl5 40 (3 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 84 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3252 Harrow Gp-Spike -Tl5 44 (5 Row/14 Arm)
| 20***59 | Lockwasher | 56 |
| 20***06 | Locknut | 154 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3244 Harrow Gp-Spike -Tl5 40 (5 Row/12 Arm)
| 20***59 | Lockwasher | 56 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3240 Harrow Gp-Spike -Tl5 38 (5 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3236 Harrow Gp-Spike -Tl5 36 (5 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3263 Harrow Gp-Spike -Tl5 50 (3 Row/18 Arm)
| 20***59 | Lockwasher | 88 |
| 20***06 | Locknut | 126 |
| 20***04 | Bolt-Grade 5 | 36 |
211-3235 Harrow Gp-Spike -Tl5 36 (3 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 84 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3231 Harrow Gp-Spike -Tl5 34 (3 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 84 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3232 Harrow Gp-Spike -Tl5 34 (5 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3251 Harrow Gp-Spike -Tl5 44 (3 Row/14 Arm)
| 20***59 | Lockwasher | 56 |
| 20***06 | Locknut | 98 |
| 20***04 | Bolt-Grade 5 | 28 |
211-3259 Harrow Gp-Spike -Tl5 48 (3 Row/16 Arm)
| 20***59 | Lockwasher | 72 |
| 20***06 | Locknut | 112 |
| 20***04 | Bolt-Grade 5 | 32 |
211-3260 Harrow Gp-Spike -Tl5 48 (5 Row/16 Arm)
| 20***59 | Lockwasher | 72 |
| 20***06 | Locknut | 176 |
| 20***04 | Bolt-Grade 5 | 32 |
211-3255 Harrow Gp-Spike -Tl5 46 (3 Row/14 Arm)
| 20***59 | Lockwasher | 64 |
| 20***06 | Locknut | 98 |
| 20***04 | Bolt-Grade 5 | 28 |
211-3264 Harrow Gp-Spike -Tl5 50 (5 Row/18 Arm)
| 20***59 | Lockwasher | 88 |
| 20***06 | Locknut | 198 |
| 20***04 | Bolt-Grade 5 | 36 |
211-3228 Harrow Gp-Spike -Tl5 32 (5 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3256 Harrow Gp-Spike -Tl5 46 (5 Row/14 Arm)
| 20***59 | Lockwasher | 64 |
| 20***06 | Locknut | 154 |
| 20***04 | Bolt-Grade 5 | 28 |
211-3227 Harrow Gp-Spike -Tl5 32 (3 Row/12 Arm)
| 20***59 | Lockwasher | 48 |
| 20***06 | Locknut | 84 |
| 20***90 | Lockwasher | 34 |
211-3247 Harrow Gp-Spike -Tl5 42 (3 Row/12 Arm)
| 20***59 | Lockwasher | 56 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3248 Harrow Gp-Spike -Tl5 42 (5 Row/12 Arm)
| 20***59 | Lockwasher | 56 |
| 20***06 | Locknut | 132 |
| 20***04 | Bolt-Grade 5 | 24 |
211-3242 Harrow Gp-Tine -Tl5 40 (4 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3229 Harrow Gp-Tine -Tl5 34 (3 Row/10 Arm)
| 20***37 | Lockwasher | 40 |
| 20***51 | Bolt-Grade 5; (Shear) | 10 |
| 20***90 | Lockwasher | 60 |
211-3245 Harrow Gp-Tine -Tl5 42 (3 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3230 Harrow Gp-Tine -Tl5 34 (4 Row/10 Arm)
| 20***37 | Lockwasher | 40 |
| 20***51 | Bolt-Grade 5; (Shear) | 10 |
| 20***90 | Lockwasher | 60 |
211-3253 Harrow Gp-Tine -Tl5 46 (3 Row/ 14 Arm)
| 20***37 | Lockwasher | 56 |
| 20***51 | Bolt-Grade 5; (Shear) | 14 |
| 20***90 | Lockwasher | 114 |
211-3234 Harrow Gp-Tine -Tl5 36 (4 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3238 Harrow Gp-Tine -Tl5 38 (4 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3262 Harrow Gp-Tine -Tl5 50 (4 Row/14 Arm)
| 20***37 | Lockwasher | 56 |
| 20***51 | Bolt-Grade 5; (Shear) | 14 |
| 20***90 | Lockwasher | 86 |
211-3241 Harrow Gp-Tine -Tl5 40 (3 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3233 Harrow Gp-Tine -Tl5 36 (3 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
209-2530 Harrow Gp-Tine -Tl5 30 (3 Row/8 Arm)
| 20***37 | Lockwasher | 32 |
| 20***51 | Bolt-Grade 5; (Shear) | 8 |
| 20***90 | Lockwasher | 48 |
209-2531 Harrow Gp-Tine -Tl5 30 (4 Row/8 Arm)
| 20***37 | Lockwasher | 32 |
| 20***51 | Bolt-Grade 5; (Shear) | 8 |
| 20***90 | Lockwasher | 80 |
211-3226 Harrow Gp-Tine -Tl5 32 (4 Row/10 Arm)
| 20***37 | Lockwasher | 40 |
| 20***51 | Bolt-Grade 5; (Shear) | 10 |
| 20***90 | Lockwasher | 60 |
211-3237 Harrow Gp-Tine -Tl5 38 (3 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3257 Harrow Gp-Tine -Tl5 48 (3 Row/14 Arm)
| 20***37 | Lockwasher | 56 |
| 20***51 | Bolt-Grade 5; (Shear) | 14 |
| 20***90 | Lockwasher | 114 |
211-3246 Harrow Gp-Tine -Tl5 42 (4 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3249 Harrow Gp-Tine -Tl5 44 (3 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3258 Harrow Gp-Tine -Tl5 48 (4 Row/14 Arm)
| 20***37 | Lockwasher | 56 |
| 20***51 | Bolt-Grade 5; (Shear) | 14 |
| 20***90 | Lockwasher | 86 |
211-3250 Harrow Gp-Tine -Tl5 44 (4 Row/12 Arm)
| 20***37 | Lockwasher | 48 |
| 20***51 | Bolt-Grade 5; (Shear) | 12 |
| 20***90 | Lockwasher | 72 |
211-3254 Harrow Gp-Tine -Tl5 46 (4 Row/14 Arm)
| 20***37 | Lockwasher | 56 |
| 20***51 | Bolt-Grade 5; (Shear) | 14 |
| 20***90 | Lockwasher | 86 |
211-3261 Harrow Gp-Tine -Tl5 50 (3 Row/14 Arm)
| 20***37 | Lockwasher | 56 |
| 20***51 | Bolt-Grade 5; (Shear) | 14 |
| 20***90 | Lockwasher | 114 |
211-3225 Harrow Gp-Tine -Tl5 32 (3 Row/10 Arm)
| 20***37 | Lockwasher | 40 |
| 20***51 | Bolt-Grade 5; (Shear) | 10 |
| 20***90 | Lockwasher | 60 |
210-2476 Shank Ar-C -Tl5 38 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 77 |
| 20***81 | Extension Group-Center Frame; -(C-Shank) Tl5 38 | 1 |
| 20***43 | Shank Group-C | 77 |
210-1981 Shank Ar-C -Tl5 32 (8 In Spacing/10 In Sweeps)
| 20***80 | Extension Group-Center Frame; -(S & C-Shank) Tl5 32,36,38 | 1 |
| 20***43 | Shank Group-C | 49 |
| 21***86 | Sweep Group-Tillage; -10 In | 49 |
209-2528 Shank Ar-C -Tl5 30 (8 In Spacing/10 In Sweeps)
| 20***28 | Shank Ar-C; -Tl5 30 (8 In Spacing/10 In Sweeps) | 1 |
| 20***79 | Extension Group-Center Frame; -(S & C-Shank) Tl5 30,34 | 1 |
| 20***43 | Shank Group-C | 45 |
210-2701 Shank Ar-C -Tl5 48 (8 In Spacing/10 In Sweeps)
| 20***43 | Shank Group-C | 73 |
| 20***62 | Extension Group-Center Frame; -(S & C-Shank) Tl5 40,44,48 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 73 |
209-2529 Shank Ar-C -Tl5 30 (6 In Spacing/9 In Sweeps)
| 20***29 | Shank Ar-C; -Tl5 30 (6 In Spacing/9 In Sweeps) | 1 |
| 20***65 | Sweep Group-Tillage; -9 In | 61 |
| 20***43 | Shank Group-C | 61 |
210-1982 Shank Ar-C -Tl5 32 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 65 |
| 20***43 | Shank Group-C | 65 |
| 20***60 | Extension Group-Center Frame; -(C-Shank) Tl5 32,36 | 1 |
210-2497 Shank Ar-C -Tl5 46 (8 In Spacing/10 In Sweeps)
| 20***43 | Shank Group-C | 69 |
| 20***63 | Extension Group-Center Frame; -(C & S-Shank) Tl5 42,46,50 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 69 |
210-2488 Shank Ar-C -Tl5 42 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 85 |
| 20***83 | Extension Group-Center Frame; -(C-Shank) Tl5 42,46,50 | 1 |
| 20***43 | Shank Group-C | 85 |
210-2702 Shank Ar-C -Tl5 48 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 97 |
| 20***82 | Extension Group-Center Frame; -(C-Shank) Tl5 40,44,48 | 1 |
| 20***43 | Shank Group-C | 97 |
210-2481 Shank Ar-C -Tl5 40 (8 In Spacing/10 In Sweeps)
| 20***43 | Shank Group-C | 61 |
| 20***62 | Extension Group-Center Frame; -(S & C-Shank) Tl5 40,44,48 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 61 |
210-2498 Shank Ar-C -Tl5 46 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 93 |
| 20***83 | Extension Group-Center Frame; -(C-Shank) Tl5 42,46,50 | 1 |
| 20***43 | Shank Group-C | 93 |
210-2152 Shank Ar-C -Tl5 36 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 73 |
| 20***43 | Shank Group-C | 73 |
| 20***60 | Extension Group-Center Frame; -(C-Shank) Tl5 32,36 | 1 |
210-2502 Shank Ar-C -Tl5 50 (8 In Spacing/10 In Sweeps)
| 20***43 | Shank Group-C | 75 |
| 20***63 | Extension Group-Center Frame; -(C & S-Shank) Tl5 42,46,50 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 75 |
210-2151 Shank Ar-C -Tl5 36 (8 In Spacing/10 In Sweeps)
| 20***80 | Extension Group-Center Frame; -(S & C-Shank) Tl5 32,36,38 | 1 |
| 20***43 | Shank Group-C | 55 |
| 21***86 | Sweep Group-Tillage; -10 In | 55 |
210-2492 Shank Ar-C -Tl5 44 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 89 |
| 20***82 | Extension Group-Center Frame; -(C-Shank) Tl5 40,44,48 | 1 |
| 20***43 | Shank Group-C | 89 |
210-2475 Shank Ar-C -Tl5 38 (6 In Spacing/9 In Sweeps)
| 20***80 | Extension Group-Center Frame; -(S & C-Shank) Tl5 32,36,38 | 1 |
| 20***43 | Shank Group-C | 57 |
| 21***86 | Sweep Group-Tillage; -10 In | 57 |
210-2491 Shank Ar-C -Tl5 44 (8 In Spacing/10 In Sweeps)
| 20***43 | Shank Group-C | 67 |
| 20***62 | Extension Group-Center Frame; -(S & C-Shank) Tl5 40,44,48 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 67 |
210-1989 Shank Ar-C -Tl5 34 (8 In Spacing/10 In Sweeps)
| 20***79 | Extension Group-Center Frame; -(S & C-Shank) Tl5 30,34 | 1 |
| 20***43 | Shank Group-C | 51 |
| 21***86 | Sweep Group-Tillage; -10 In | 51 |
210-2503 Shank Ar-C -Tl5 50 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 101 |
| 20***83 | Extension Group-Center Frame; -(C-Shank) Tl5 42,46,50 | 1 |
| 20***43 | Shank Group-C | 101 |
210-2487 Shank Ar-C -Tl5 42 (8 In Spacing/10 In Sweeps)
| 20***43 | Shank Group-C | 63 |
| 20***63 | Extension Group-Center Frame; -(C & S-Shank) Tl5 42,46,50 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 63 |
210-1990 Shank Ar-C -Tl5 34 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 69 |
| 20***43 | Shank Group-C | 69 |
| 20***55 | Extension Group-Center Frame; -Tl5 30,34 | 1 |
210-2482 Shank Ar-C -Tl5 40 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 81 |
| 20***82 | Extension Group-Center Frame; -(C-Shank) Tl5 40,44,48 | 1 |
| 20***43 | Shank Group-C | 81 |
210-2486 Shank Ar-S -Tl5 42 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 85 |
| 20***42 | Shank Group-S; -Standard Mount | 85 |
| 20***64 | Extension Group-Center Frame; -(S-Shank) Tl5 42,46,50 | 1 |
210-2479 Shank Ar-S -Tl5 40 (8 In Spacing/10 In Sweeps)
| 20***42 | Shank Group-S; -Standard Mount | 61 |
| 20***62 | Extension Group-Center Frame; -(S & C-Shank) Tl5 40,44,48 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 61 |
210-2474 Shank Ar-S -Tl5 38 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 77 |
| 20***42 | Shank Group-S; -Standard Mount | 77 |
| 20***61 | Extension Group-Center Frame; -(S-Shank) Tl5 38 | 1 |
210-1980 Shank Ar-S -Tl5 32 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 65 |
| 20***42 | Shank Group-S; -Standard Mount | 65 |
| 21***80 | Shank Ar-S; -Tl5 32 (6 In Spacing/9 In Sweeps) | 1 |
210-2485 Shank Ar-S -Tl5 42 (8 In Spacing/10 In Sweeps)
| 20***42 | Shank Group-S; -Standard Mount | 63 |
| 20***63 | Extension Group-Center Frame; -(C & S-Shank) Tl5 42,46,50 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 63 |
210-2495 Shank Ar-S -Tl5 46 (8 In Spacing/10 In Sweeps)
| 20***42 | Shank Group-S; -Standard Mount | 69 |
| 20***63 | Extension Group-Center Frame; -(C & S-Shank) Tl5 42,46,50 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 69 |
210-2490 Shank Ar-S -Tl5 44 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 89 |
| 20***42 | Shank Group-S; -Standard Mount | 89 |
| 21***90 | Shank Ar-S; -Tl5 44 (6 In Spacing/9 In Sweeps) | 1 |
210-2489 Shank Ar-S -Tl5 44 (8 In Spacing/10 In Sweeps)
| 20***42 | Shank Group-S; -Standard Mount | 67 |
| 20***62 | Extension Group-Center Frame; -(S & C-Shank) Tl5 40,44,48 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 67 |
209-2526 Shank Ar-S -Tl5 30 (8 In Spacing/10 In Sweeps)
| 20***26 | Shank Ar-S; -Tl5 30 (8 In Spacing/10 In Sweeps) | 1 |
| 20***79 | Extension Group-Center Frame; -(S & C-Shank) Tl5 30,34 | 1 |
| 20***42 | Shank Group-S; -Standard Mount | 45 |
210-2472 Shank Ar-S -Tl5 38 (8 In Spacing/10 In Sweeps)
| 20***80 | Extension Group-Center Frame; -(S & C-Shank) Tl5 32,36,38 | 1 |
| 20***42 | Shank Group-S; -Standard Mount | 57 |
| 21***86 | Sweep Group-Tillage; -10 In | 57 |
210-1988 Shank Ar-S -Tl5 34 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 69 |
| 20***42 | Shank Group-S; -Standard Mount | 69 |
| 20***59 | Extension Group-Center Frame; -(S-Shank) Tl5 30,34 | 1 |
210-2480 Shank Ar-S -Tl5 40 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 81 |
| 20***42 | Shank Group-S; -Standard Mount | 81 |
| 21***80 | Shank Ar-S; -Tl5 40 (6 In Spacing/9 In Sweeps) | 1 |
210-1979 Shank Ar-S -Tl5 32 (8 In Spacing/10 In Sweeps)
| 20***80 | Extension Group-Center Frame; -(S & C-Shank) Tl5 32,36,38 | 1 |
| 20***42 | Shank Group-S; -Standard Mount | 49 |
| 21***86 | Sweep Group-Tillage; -10 In | 49 |
210-2149 Shank Ar-S -Tl5 36 (8 In Spacing/10 In Sweeps)
| 20***80 | Extension Group-Center Frame; -(S & C-Shank) Tl5 32,36,38 | 1 |
| 20***42 | Shank Group-S; -Standard Mount | 55 |
| 21***86 | Sweep Group-Tillage; -10 In | 55 |
209-2527 Shank Ar-S -Tl5 30 (6 In Spacing/9 In Sweeps)
| 20***27 | Shank Ar-S; -Tl5 30 (6 In Spacing/9 In Sweeps) | 1 |
| 20***65 | Sweep Group-Tillage; -9 In | 61 |
| 20***42 | Shank Group-S; -Standard Mount | 61 |
210-2496 Shank Ar-S -Tl5 46 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 93 |
| 20***42 | Shank Group-S; -Standard Mount | 93 |
| 20***64 | Extension Group-Center Frame; -(S-Shank) Tl5 42,46,50 | 1 |
210-2501 Shank Ar-S -Tl5 50 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 101 |
| 20***42 | Shank Group-S; -Standard Mount | 101 |
| 20***64 | Extension Group-Center Frame; -(S-Shank) Tl5 42,46,50 | 1 |
210-1986 Shank Ar-S -Tl5 34 (8 In Spacing/10 In Sweeps)
| 20***79 | Extension Group-Center Frame; -(S & C-Shank) Tl5 30,34 | 1 |
| 20***42 | Shank Group-S; -Standard Mount | 51 |
| 21***86 | Sweep Group-Tillage; -10 In | 51 |
210-2500 Shank Ar-S -Tl5 50 (8 In Spacing/10 In Sweeps)
| 20***42 | Shank Group-S; -Standard Mount | 75 |
| 20***63 | Extension Group-Center Frame; -(C & S-Shank) Tl5 42,46,50 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 75 |
210-2700 Shank Ar-S -Tl5 48 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 97 |
| 20***42 | Shank Group-S; -Standard Mount | 97 |
| 21***00 | Shank Ar-S; -Tl5 48 (6 In Spacing/9 In Sweeps) | 1 |
210-2150 Shank Ar-S -Tl5 36 (6 In Spacing/9 In Sweeps)
| 20***65 | Sweep Group-Tillage; -9 In | 73 |
| 20***42 | Shank Group-S; -Standard Mount | 73 |
| 21***50 | Shank Ar-S; -Tl5 36 (6 In Spacing/9 In Sweeps) | 1 |
210-2699 Shank Ar-S -Tl5 48 (8 In Spacing/10 In Sweeps)
| 20***42 | Shank Group-S; -Standard Mount | 73 |
| 20***62 | Extension Group-Center Frame; -(S & C-Shank) Tl5 40,44,48 | 1 |
| 21***86 | Sweep Group-Tillage; -10 In | 73 |
209-5043 Shank Gp-C
| 1K***72 | Locknut Horn To Guard | 2 |
| 20***59 | Lockwasher | 4 |
| 20***62 | Bolt-Grade 5 | 1 |
209-5042 Shank Gp-S -Standard Mount
| 20***75 | Lockwasher | 3 |
| 20***04 | Bolt-Grade 5 | 1 |
| 20***01 | Mount | 1 |
210-1486 Sweep Gp-Tillage -10 In
| 20***08 | Lockwasher | 2 |
| 20***07 | Bolt-Plow; (Grade 5) | 2 |
| 20***08 | Washer | 1 |
209-4765 Sweep Gp-Tillage -9 In
| 20***08 | Lockwasher | 2 |
| 20***07 | Bolt-Plow; (Grade 5) | 2 |
| 20***08 | Washer | 1 |
Service Equipment And Supplies
211-3278 Plate & Film Gp -Tl5 46
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3271 Plate & Film Gp -Tl5 32
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3274 Plate & Film Gp -Tl5 38
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3275 Plate & Film Gp -Tl5 40
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3276 Plate & Film Gp -Tl5 42
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3280 Plate & Film Gp -Tl5 50
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3270 Plate & Film Gp -Tl5 30
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3273 Plate & Film Gp -Tl5 36
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3279 Plate & Film Gp -Tl5 48
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3272 Plate & Film Gp -Tl5 34
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
211-3277 Plate & Film Gp -Tl5 44
| 16***89 | Tack-Fastener | 4 |
| 20***75 | Lockwasher | 10 |
| 20***33 | Washer | 4 |
Frequently asked questions
What engine does the Caterpillar TL5 30 have?
None. The TL5 30 is a towed field cultivator with no engine of its own; it draws all power from the towing tractor's engine and hydraulic remotes for depth control and wing fold.
What is the operating weight of the Caterpillar TL5 30?
Operating weight for this exact model is not publicly documented. Check the implement's data plate or contact a Cat dealer for the figure specific to your unit's configuration.
What replaced the Caterpillar TL5 30, or is there a successor model?
No documented predecessor or successor was found for the TL5 30 specifically. It remains part of the wider active Caterpillar TL5 sized field-cultivator lineup (TL5 30 through TL5 50), rather than a discontinued standalone model with a named replacement.
What TL5 30 owners discuss
Does the TL5 30 have its own engine, pump, or transmission?
No. Owner discussion is consistent on this point: the TL5 30 is a towed S-shank field cultivator with no onboard engine, hydraulic tank, or drivetrain. Every function — transport, fold, and working depth — draws power from the towing tractor's drawbar and remote hydraulic outlets. Buyers coming from powered-machine listings sometimes expect engine specs; there are none to find because the implement has no power source of its own.
What wears out fastest on this class of cultivator, since there's no undercarriage to inspect?
In place of undercarriage wear, owners watch the ground-engaging tips: shank points and sweeps take the abrasion load and are the highest-turnover part on any S-shank cultivator. Wear rate tracks soil type more than hours — sandy or gravelly ground chews through points noticeably faster than clay, and tips running in the tractor's wheel track wear quicker than the rest of the row. Reversible or bolt-on points let an operator flip or swap them without pulling the whole shank.
How do the shanks behave when they hit a rock or buried obstruction?
S-shank tillage tools rely on spring-steel flex or a trip mechanism (shear bolt or auto-reset) to protect the shank and frame when a point catches an obstruction. Community experience is that shear-bolt setups are simple and cheap to service but shear more often as a nuisance in rocky fields, while auto-reset shanks cost more up front but trip and re-seat without stopping to replace hardware. Either way, repeated tripping in the same spot is a sign of a buried obstruction worth clearing rather than a mechanism fault. Because a sheared or bent shank changes ground clearance and can release stored spring energy, have your dealer verify shank and trip-mechanism condition before returning the machine to service.
Why does working depth wander or feel inconsistent field to field?
Since the cultivator has no hydraulics of its own, depth-control cylinders lift and hold the frame using flow and pressure supplied by the tractor's remotes. Inconsistent depth is most often traced to worn cylinder seals, a sticking control valve, or simply insufficient hydraulic flow from an undersized or older tractor rather than a defect in the implement itself. Cracked or soft hoses and slow cylinder response are the usual first checks before assuming a structural problem.
What about the frame and wing-fold hinges on a used unit — anything to watch for?
Frame cracking shows up most at weld joints and around the wing-fold hinge pins on cultivators that fold for road transport, especially on units that saw hard use or sat outside through winters. Owners recommend running the folding sequence through its full range and checking hinge pins and bushings for play, plus a visual pass along main-frame welds for stress cracks that aren't always obvious at a glance. A cracked main frame or worn fold pin affects transport safety as well as working alignment, so have your dealer verify frame and hinge integrity on any unit with visible wear or prior repair welds.
Does this implement have any onboard electrical or sensor system to worry about?
No — as a passive towed cultivator, the TL5 30 carries no ECM, sensors, or onboard wiring beyond road-transport lighting where fitted, and that lighting draws off the tractor's harness. Any electrical complaint on a rig like this traces back to the tractor's connector or harness, not the implement.
What should a buyer check before purchasing a used TL5 30?
Community consensus for this class of implement centers on a handful of checks: shank and point wear (thickness and reversibility remaining), any bent or previously-tripped shanks, cracks at frame welds and wing-fold hinge pins/bushings, hydraulic cylinder condition (leaks, scoring, smooth full-stroke travel), hose condition, and hitch/drawbar pin and clevis wear for slop that would cause transport sway. Cycling the fold and depth-control functions off a tractor's remotes during inspection reveals more than a static walk-around. Given thin public documentation on this exact model, cross-check against the specific unit's data plate and have your dealer verify structural and hydraulic components before putting a used unit to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific TL5 30 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.