Caterpillarforest productstrack feller buncher
Caterpillar TK751
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar TK751 is the full tail swing (FTS) tracked forestry carrier Cat catalogued as the 551 Track Feller Buncher, sitting in size between the 541 and 552 in Cat's mid-2000s forestry lineup. It runs a Cat C9 ACERT diesel rated at roughly 305 hp (227 kW) gross and 282 hp (210 kW) net, certified to the Tier 2/Tier 3 emissions rules current at the time of build. Operating weight runs about 68,469 to 69,175 lb (31,057 to 31,377 kg) depending on whether the carrier is set up as a feller buncher or dressed out as a track harvester/processor base — heavier felling heads or optional dangle-head processor attachments push total working weight higher, so treat any single number as configuration-dependent. The base carrier accepts a felling head (disc saw or shear) with a dedicated variable-displacement pump for the felling circuit, or an optional harvester/processor head with its own hydraulic valving; Cat offered no distinct predecessor under the 551 name, and unlike its 541 and 552 siblings, the 551 was never formally carried forward as a "Series 2" nameplate.
Where the 541 and 552 went on to Series 2 revisions with updated hydraulics and operator stations, the 551/TK751 stayed a single generation, with running changes limited mostly to fluid and filtration options — S-O-S-supported hydraulic oil extension programs and an optional biodegradable hydraulic oil for environmentally sensitive cutting sites — rather than a sheet-metal or engine redesign. That single-generation status is exactly why it matters in the used and parts market today: the C9 ACERT is a common, well-supported industrial engine shared across a wide swath of Cat's forestry and construction line, so engine parts are easy to source even though the 551 nameplate itself is long out of production. Buyers should expect the failure points typical of any high-hour FTS carrier — swing bearing wear, felling head cylinder and accumulator condition, and undercarriage wear from stump and slash contact — to drive most of the resale and rebuild-cost conversation.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar TK751 specifications
Engine
| Engine model | Cat C9 ACERT, inline-6 diesel |
| Displacement | 8.8 L (537 cu in) |
| Gross power | 227 kW (305 hp) |
| Net power | 210 kW (282 hp) at 2100 rpm |
| Emissions tier | U.S. EPA Tier 2 (this base generation; a later Series 2 update of siblings in the family moved to Tier 3, but that update is not documented as applying to this model) |
Weights
| Operating weight, standard linkage (no felling head) | 31,060 to 31,380 kg (68,470 to 69,175 lb) — figures vary slightly by source |
| Operating weight, track-harvester configuration | approx. 31,380 kg (69,175 lb) |
| Shipping weight | not published for this model |
| Ground pressure | not published for this model |
Dimensions
| Overall transport length | 9.43 to 9.45 m (30.9 to 31.0 ft) |
| Overall transport width | 3.33 to 3.35 m (10.9 to 11.0 ft) |
| Height to cab top | 3.66 m (12.0 ft) |
| Track gauge | 2.59 m (8.51 ft) |
| Track shoe width | 711 mm (28 in) |
| Track length on ground | 4.9 m (193 in) |
| Ground clearance | 74 mm (2.92 in) |
Performance
| Maximum reach | 8.6 to 8.63 m (28.2 to 28.3 ft) |
| Bare-pin lift capacity | reported figures vary by source and reach point — one source lists about 9,900 kg (21,800 lb) at 6.55 m (21.5 ft) reach, another lists about 5,000 kg (11,020 lb) at maximum reach; treat as configuration/reach-dependent and verify with dealer for a specific reach point |
| Tractive effort / maximum drawbar pull | 46,000 to 47,200 kg (101,500 to 104,000 lb) — varies by source |
| Travel speed | not documented in publicly available sources for this model |
| Gradeability | not documented in publicly available sources for this model |
Service capacities (summary)
| Fuel tank | 1,181 L (312 gal) |
| Hydraulic system | 370 L (97.8 gal) |
| Engine oil | 39.4 L (10.4 gal) |
| Cooling system | 61.3 L (16.2 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
TK751 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C9 ACERT diesel | 39 L (10.3 US gal); some published spec sheets round to 10.4 US gal | Cat DEO (Diesel Engine Oil); select SAE viscosity grade off the ambient-temperature chart in the OMM - lighter grade (10W-30) for cold starts, 15W-40 for warm climates. 500-hour oil change interval on this platform. |
| Cooling system | 61 L (16.1 US gal); some published spec sheets round to 16.2 US gal | Cat Extended Life Coolant/Antifreeze (Cat ELC) at 50 percent concentration. Change interval extended to 12,000 hours with ELC. |
| Fuel tank | 1181 L (312 US gal) | Ultra-low-sulfur No. 2 diesel meeting the fuel spec called out in the OMM; machine carries a fuel/water separator and electric priming pump as standard. |
| Hydraulic tank | 318 to 323 L (84 to 85.3 US gal), figure varies slightly between standard-equipment listing and service-refill table | Cat Hydraulic Oil (HYDO) - high-zinc anti-wear formulation for pump and mechanical wear protection. Biodegradable Cat HEES hydraulic oil offered as an environmentally-sound alternative. |
| Hydraulic system total (tank plus lines, cylinders, coolers) | 370 L (97.7 to 97.8 US gal) | Cat Hydraulic Oil (HYDO), same fluid as tank fill. Change interval extendable from 2,000 to 4,000 hours under normal conditions. |
| Swing drive (325 swing drive/motor) | 10 L (2.6 to 2.7 US gal) | Cat TDTO (Transmission/Drive Train Oil, TO-4 class); grade selected per the OMM's ambient-temperature chart. |
| Final drives (each) - GFT 80 on the 541-series chassis, GFT 110 on the 552-series chassis | Not published in the available factory spec literature for this family; confirm exact fill with the OMM or dealer | Cat TDTO (TO-4 class) drivetrain oil, same family as the swing drive fill, graded to ambient temperature. |
| Grease - pivot pins, boom/stick linkage, felling-head mounts | Spec only, no reservoir capacity applies | Cat Multipurpose (moly-based, extreme-application) grease; apply at scheduled lubrication intervals per the OMM lube chart. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar TK751 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the TK751 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S-O-S sampling on the C9 ACERT engine oil, hydraulic oil, and swing drive/final drive gear oil on this carrier — the hydraulic system's 2000-to-4000-hour drain extension only holds if the trend stays clean. Track coolant condition separately since ELC additive depletion is a common early flag. Catching swing bearing lubricant contamination or accumulator precharge drift early avoids unplanned felling head downtime mid-shift.
Corrective & Common Repairs
Expect recurring wear at the disc saw or shear hub, boom and stick pin bushings, and hydraulic hoses routed near the felling head, all of which take repeated shock loading. Swing bearing play and felling head accumulator precharge loss are the most common complaints on higher-hour units. Track tension and undercarriage damage from stumps and slash need frequent inspection given the terrain this carrier works.
Overhaul & Rebuild Points
Major rebuild points on the TK751 center on the swing bearing, undercarriage (rollers, idlers, track chain), and the felling head cylinder/rod seals, all of which see heavier cyclic loading than a typical excavator platform. On the C9 ACERT, plan valve lash checks and injector evaluation around the 4000-hour mark, with turbocharger and charge-air inspection tied to the same window.
Seasonal & Environment Servicing
Bark, chips, and sawdust load the radiator core and engine air intake fast in heavy cutting — clear screens daily in season. Confirm coolant concentration and cold-start aids before winter logging, and match hydraulic oil viscosity grade to the operating climate since this carrier often works both summer clear-cut and winter frozen-ground sites. Keep the cab pressurizer filter serviced to manage dust and debris intrusion.
TK751 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 188-8044 | Film | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
TK751 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100-03 / 100-04 | Engine Oil Pressure Sensor circuit fault, voltage above normal or voltage below normal | Chafed or corroded sensor wiring, damaged connector, or a failed oil pressure sensor | Inspect the sensor connector and harness for damage or moisture intrusion, confirm actual pressure with a mechanical gauge before replacing the sensor |
| CID 110-03 / 110-04 | Engine Coolant Temperature Sensor circuit fault, voltage above or below normal | Damaged sensor wiring, poor connector contact, or a drifted/failed coolant temp sensor | Check the connector for corrosion, test sensor resistance against spec, repair harness as needed |
| CID 111-02 | Engine Coolant Level Sensor signal abnormal or lost | Low coolant level, trapped air at the sensor, or a faulty level probe/wiring | Top off coolant first and bleed air, then inspect the sensor and wiring if the code returns |
| CID 168-02 / 168-04 | System Voltage erratic or below normal range | Loose or corroded battery terminals, chafed ground straps, or a weak/failing alternator | Check battery and ground connections first, load-test the batteries, verify charging output with Cat ET before replacing parts |
| CID 190-08 | Engine Speed/Timing Sensor abnormal update rate | Incorrect sensor air gap, metal shavings at the sensor tip, or damaged sensor wiring | Inspect and reset the sensor air gap to spec, check harness continuity and connector condition |
| CID 1-05 | Cylinder #1 Injector solenoid open circuit | Broken or disconnected injector harness wiring, corroded valve-cover connector, or a failed injector solenoid | Inspect the injector harness and connector for damage, check solenoid resistance, repair wiring or replace the injector as indicated by Cat ET |
| CID 342-08 | Engine Overspeed shutdown event | Engine actually exceeded rated speed under a runaway or downhill-load condition, or a faulty speed sensor falsely triggered the event | Confirm whether a true overspeed occurred, then check governor response and speed/timing sensor wiring if not |
| E360 (Low Engine Oil Pressure event) | Engine-detected low oil pressure condition at warning, derate, or shutdown severity | Low oil level, worn oil pump, plugged filter, or a failed pressure sensor | Shut down as soon as it is safe, check oil level and filter condition, confirm with a mechanical gauge before restart |
| E361 (High Engine Coolant Temperature event) | Engine-detected high coolant temperature at warning, derate, or shutdown severity | Low coolant, a radiator core packed with slash and debris (common in forestry duty), a failed fan drive, or a stuck thermostat | Check coolant level and clear debris from the radiator/fan guard immediately, do not keep working through a derate or shutdown level |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
TK751 attachments & work tools
Felling head (disc saw type)
Primary work tool for this machine is an interchangeable felling head mounted on the boom tip, not a bucket or fork. Disc-saw heads for this size class cut trees up to roughly 500-620 mm (20-24 in) diameter, with accumulator arms that let the operator gather several stems before bunching. Cat's own HF-series disc-saw heads (later HF181/HF201/HF221 generation) cover this capacity range on the successor 511/521/522/532/551 track feller buncher line; exact head pairing for the TK751's own build years is not documented online, so treat head selection as size-class guidance rather than a confirmed factory pairing.
Felling head (shear type, alternative)
Shear-style felling heads (hydraulic guillotine blade instead of a spinning disc) were also common on this machine class through third-party attachment houses, useful for smaller-diameter, high-volume stem counts. No factory shear-head model number ties specifically to the TK751 in available documentation; shear heads on Timbco-heritage carriers were typically fitted via aftermarket boom adapters rather than a Cat factory option.
Coupler and boom mounting
Felling heads mount to the boom through a leveling/tilt cradle rather than a quick-coupler pin-on system. The cradle carries dedicated tilt cylinders so the head stays level and can rotate as the boom raises and lowers, keeping the cut face square to the tree regardless of machine pitch.
Hydraulic kit / arrangement
Running a felling head needs a dedicated saw or shear circuit and accumulator-arm circuit fed from the machine's main hydraulic system, plus a control valve group and foot/hand controls in the cab for head tilt, rotation, and arm closure. This is a factory-integrated arrangement on feller bunchers of this class rather than a bolt-on auxiliary kit, since the head is effectively a permanent part of the machine's work function.
Cab guarding
Track feller bunchers in this class are fitted with reinforced operator protective structures (FOPS/OPS-rated cab) plus polycarbonate or wire-mesh window guarding to protect against falling limbs and kickback during felling. This guarding is standard-practice for the machine type rather than an optional add-on.
Undercarriage and factory configuration
Machines in the TK7xx track feller buncher family (TK711 through TK751/TK752) share a common undercarriage and cab platform, with the TK751 sitting toward the larger end of that lineup. Factory options in this class typically include heated/AC cab, work-light packages, and track-width or pad variants for ground conditions, but TK751-specific option lists were not found in available sources; verify exact factory codes with a dealer for the specific serial range.
All TK751 assemblies by section
Every catalogued assembly group for the Caterpillar TK751. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
210-9245 Air Cleaner Gp
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
| 17***92 | Cover As | 1 |
235-4022 Air Cleaner Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 18***03 | Hose-Elbow | 1 |
| 18***30 | Hose-Elbow | 1 |
173-6107 Elbow Gp-Air Inlet
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 8 |
| 17***07 | Elbow Group-Air Inlet | 1 |
| 18***71 | Elbow-Air Inlet | 1 |
202-0996 Manifold Gp-Exhaust
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 19***97 | Manifold-Exhaust | 1 |
235-4023 Muffler Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 13***81 | Clamp As | 1 |
| 23***23 | Muffler Group | 1 |
191-5094 Turbocharger Gp
| 13***01 | Housing-Turbine | 1 |
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 19***94 | Turbocharger Group | 1 |
191-5518 Turbocharger Gp
| 19***94 | Turbocharger Group | 1 |
| 19***18 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
Basic Engine
224-7846 Belt Tensioner Gp
| 18***49 | Support | 1 |
| 19***43 | Belt Tensioner | 1 |
| 22***46 | Belt Tensioner Group | 1 |
164-6100 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 16***00 | Camshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 20***01 | Cover Group-Cylinder Block; -Crankcase | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
133-3089 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 13***89 | Cover Group-Flywheel Housing | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
211-3285 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
164-6490 Cover Gp-Valve Mechanism
| 16***90 | Cover Group-Valve Mechanism | 1 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 24***00 | Spring | 9 |
164-6148 Crankshaft Gp
| 15***39 | Bearing-Main; (Standard) | 7 |
| 16***48 | Crankshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
325-3915 Cylinder Block As
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***05 | Bearing-Sleeve; (Camshaft) | 2 |
220-1951 Cylinder Block Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 0S***19 | Plug-Cup | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
220-1952 Cylinder Block Gp
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
| 22***52 | Cylinder Block Group | 1 |
311-7226 Cylinder Head As
| 17***88 | Seat-Valve | 12 |
| 17***90 | Seat-Valve | 12 |
| 22***90 | Sleeve-Injector | 6 |
311-7225 Cylinder Head As
| 17***88 | Seat-Valve | 12 |
| 17***90 | Seat-Valve | 12 |
| 22***90 | Sleeve-Injector | 6 |
210-5987 Cylinder Head Gp
| 16***71 | Fastener Group-Cylinder Head | 26 |
| 18***15 | Gasket Assem. | 1 |
| 21***84 | Cylinder Head Group | 1 |
210-5984 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***42 | Valve; (Intake) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
273-3034 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***42 | Valve; (Intake) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
190-0795 Damper & Pulley Gp
| 11***32 | Spacer-Special | 1 |
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
167-0171 Fastener Gp-Cylinder Head
| 16***71 | Fastener Group-Cylinder Head | 1 |
| 18***63 | Bolt; (M16x2x180-mm) | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
116-5386 Flywheel Gp
| 11***86 | Flywheel Group | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***61 | Flywheel As | 1 |
155-7918 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
187-0473 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 18***73 | Housing Group-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
191-3063 Lifting Gp-Engine
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 19***63 | Lifting Group-Engine | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
216-9855 Mounting Gp-Engine
| 09***88 | Clamp; (Hose) | 1 |
| 10***37 | Washer; (24.5x135x12-mm Thk) | 2 |
| 11***30 | Support As | 2 |
219-9943 Pan Gp-Oil
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
| 19***14 | Gasket-Oil Pan; (Engine) | 1 |
188-9141 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
177-7878 Piston Gp
| 17***78 | Piston Group | 1 |
| 18***41 | Piston & Rod Group | 6 |
169-3105 Plug Gp-Engine
| 14***08 | Plug As. | 1 |
| 16***05 | Plug Group-Engine | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
213-9320 Rocker Arm Gp -Exhaust
| 16***47 | Rocker Arm As | 1 |
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
213-9321 Rocker Arm Gp -Inlet
| 16***49 | Rocker Arm As | 1 |
| 21***21 | Rocker Arm Group; -Intake | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
178-3899 Seal Gp-Crankshaft
| 17***99 | Seal Group-Crankshaft | 1 |
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
172-0961 Support Gp-Engine
| 17***61 | Support Group-Engine | 1 |
| 17***01 | Support-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
155-7927 Valve Mechanism Gp
| 15***27 | Valve Mechanism Group | 1 |
| 16***37 | Lifter As-Valve | 12 |
| 21***71 | Valve Mechanism Group | 1 |
215-9571 Valve Mechanism Gp
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 18***26 | Cooler Group-Engine Oil | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
235-4026 Cooling Ar
| 23***26 | Cooling Ar | 1 |
| 23***27 | Radiator & Mounting Group | 1 |
| 23***28 | Lines Group-Cooling; -Radiator, Aftercooler, Hydraulic Oil Cooler | 1 |
235-4056 Fan Ar-Reversible
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***85 | Elbow; (45°) | 1 |
245-0885 Fan Gp-Reversible
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 16 |
| 22***80 | Kit-Fan Hub | 1 |
235-4028 Lines Gp-Cooling -Radiator, Aftercooler, Hyd Oil Cooler
| 12***67 | Clip Loop | 2 |
| 18***94 | Clip | 1 |
| 1P***79 | Flange (Half) | 8 |
202-2767 Lines Gp-Water
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
205-4013 Plug Gp-Water Lines
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
| 20***34 | Plug-Cup; (73.38-mm Dia) | 2 |
| 7L***56 | Plug-Cup; (67.03-mm Dia) | 2 |
202-7674 Pump Gp-Water
| 20***74 | Pump Group-Water | 1 |
| 21***52 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
219-4452 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
247-1464 Radiator & Hyd Oil Cooler Gp
| 23***82 | Sleeve-Rubber | 8 |
| 23***16 | Radiator Group | 1 |
| 23***17 | Core As-Hydraulic Oil Cooler | 1 |
235-4027 Radiator & Mounting Gp
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***88 | Clamp; (Hose) | 1 |
235-1016 Radiator Gp
| 14***01 | Cap-Radiator | 1 |
| 23***16 | Radiator Group | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
217-6635 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 19***41 | Angle Assem. | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
153-5700 Battery -Maintenance Free
| 15***00 | Battery; -Maintenance Free | 1 |
258-6496 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 15***00 | Battery; -Maintenance Free | 2 |
235-4031 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 15***00 | Battery; -Maintenance Free | 2 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
226-3760 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 12***73 | Cap-Connector | 1 |
| 19***70 | Control Group-Engine Electronic | 1 |
196-4170 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 19***70 | Control Group-Engine Electronic | 1 |
| 32***01 | Control Group-Engine Electronic | 1 |
260-9652 Electrical Ar
| 21***37 | Warning Group-Backup | 1 |
| 22***57 | Wiring Group-Engine | 1 |
| 25***96 | Battery & Wiring Group | 1 |
235-4030 Electrical Ar
| 21***37 | Warning Group-Backup | 1 |
| 22***57 | Wiring Group-Engine | 1 |
| 23***30 | Electrical Ar | 1 |
245-8336 Electronics Gp-Engine Ratings
| 24***36 | Electronics Group-Engine Ratings | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
242-3517 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Screw; (M6.5x40-mm) | 4 |
| 16***56 | Bolt-Hex Head; (M8x1.25x30mm) | 1 |
112-9378 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
219-6485 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
219-6487 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
235-4032 Lighting Gp-Flood -10-Lamp, Machine
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 7 |
| 22***22 | Bracket | 4 |
258-6502 Lighting Gp-Flood -Front, Rear, Side, Compartment
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 6 |
| 22***22 | Bracket | 3 |
222-6770 Lighting Gp-Flood -Cab Front, Side
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***20 | Hinge | 1 |
| 19***12 | Cover | 1 |
250-0850 Lighting Gp-Flood -Cab Front, Side
| 23***25 | Lamp Group-Flood; -Suspended Mount | 3 |
| 25***50 | Lighting Group-Flood; -Cab Front, Side | 1 |
| 25***13 | Cover | 1 |
117-3915 Motor Gp-Electric -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
222-9161 Panel Gp-Circuit Breaker
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 13***00 | Clip; (Tab) | 2 |
252-5803 Panel Gp-Fuse
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 6 |
| 20***81 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 22***14 | Panel Group-Fuse | 1 |
222-5414 Panel Gp-Fuse
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 12***98 | Latch Assem. | 1 |
| 12***76 | Cam-Latch | 1 |
238-5022 Panel Gp-Relay
| 13***00 | Clip; (Tab) | 7 |
| 13***89 | Clip; (Ladder) | 1 |
| 17***00 | Suppressor-Arc | 1 |
235-4057 Preheater Gp-Machine
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 09***13 | Clip | 1 |
224-9686 Preheater Gp-Machine -Diesel Fired
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 13***73 | Hose-Fuel; (14 cm) | 0 |
| 13***08 | Clamp | 2 |
165-4469 Sensor Gp-Engine -Electronic Control
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 16***69 | Sensor Group-Engine; -Electronic Control | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
191-6587 Sensor Gp-Temperature -Engine Oil
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
204-0320 Sensor Gp-Temperature -Engine Oil
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 20***20 | Sensor Group-Temperature; -Engine Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
197-8391 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
118-7284 Starting Aid Gp -Air Inlet Heater
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
223-6377 Starting Motor Gp-Electric
| 10***41 | Starting Motor Group-Electric | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
104-7041 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***41 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
179-0006 Switch Gp-Magnetic -Hyd Tank Fill Pump/Motor Relay
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
223-4453 Switch Gp-Magnetic -Starting Aid Heater Relay
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 22***53 | Switch Group-Magnetic; -Starting Aid Heater-Starting Aid Heater Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
254-3783 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
158-6634 Switch Gp-Toggle
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
165-5970 Switch Gp-Toggle -Hyd Tank Fill Pump, Motor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
217-2437 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
222-5415 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***45 | Clip | 1 |
| 11***61 | Housing | 1 |
238-5006 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Housing | 1 |
222-5416 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
238-8267 Wiring Gp-Console
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
204-3604 Wiring Gp-Electronic Control
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
222-9157 Wiring Gp-Engine
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
259-9254 Wiring Gp-Hyd Tank Fill Pump
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
261-4610 Wiring Gp-Lighting -Stick Floodlights
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
235-4037 Wiring Gp-Lighting -Boom Floodlights
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
235-4035 Wiring Gp-Lighting -Stick Floodlights
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 23***35 | Wiring Group-Lighting; -Stick Floodlights | 1 |
| 24***36 | Harness As-Lighting; (Boom Lights) | 1 |
258-6517 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 8 |
235-4034 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 8 |
Engine Arrangement
242-1677 Engine Ar
| 11***86 | Flywheel Group | 1 |
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
242-1676 Engine Ar-Core
| 15***18 | Gear Group-Front | 1 |
| 15***27 | Valve Mechanism Group | 1 |
| 16***00 | Camshaft Group | 1 |
235-4020 Installation Ar-Engine
| 15***43 | Coupling & Mtg Group-Pump | 1 |
| 21***55 | Mounting Group-Engine | 1 |
| 23***20 | Installation Ar-Engine | 1 |
Frame And Body
238-9107 Box Gp-Battery
| 08***70 | Sheet | 1 |
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
253-9861 Frame As-Upper
235-4070 Frame As-Upper
| 23***70 | Frame As-Upper | 1 |
| 24***81 | Plate As | 1 |
| 7T***99 | Link | 13 |
235-4001 Frame Gp-Upper
256-0723 Frame Gp-Upper
227-6088 Gear & Bearing Gp-Swing
| 22***73 | Seal-Dust | 2 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
227-6087 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
199-4475 Gear & Bearing Gp-Swing
| 19***75 | Gear & Bearing Group-Swing | 1 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
199-4476 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
152-1735 Gear & Bearing Gp-Swing
199-4478 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
258-6479 Guard Gp-Lighting
| 1K***50 | Spring | 1 |
| 25***79 | Guard Group-Lighting | 1 |
| 25***80 | Guard As | 1 |
235-4029 Guard Gp-Radiator
| 12***18 | Seal; (1000-cm) | 0 |
| 20***38 | Rod As | 1 |
| 22***44 | Cover | 2 |
247-7641 Guard Gp-Radiator
| 12***36 | Handle | 2 |
| 24***41 | Guard Group-Radiator | 1 |
| 3R***22 | Hinge | 1 |
235-4002 Hood Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
| 21***21 | Plate | 4 |
| 21***20 | Seal | 1 |
258-4508 Hood Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
| 15***59 | Eyebolt; (M8x1.25x100-mm) | 4 |
| 21***21 | Plate | 4 |
280-1999 Step As
| 28***99 | Step As | 1 |
257-2044 Step Gp
| 17***94 | Pin As | 2 |
| 23***96 | Step As | 1 |
| 23***25 | Step As | 1 |
235-4008 Step Gp
| 17***94 | Pin As | 2 |
| 23***96 | Step As | 1 |
| 23***25 | Step As | 1 |
235-4016 Tilt Gp-Hood
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 2 |
| 14***48 | Fitting As | 2 |
Fuel System
205-0109 Filter Gp-Fuel -Secondary
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 17***99 | Base As-Fuel Filter | 1 |
| 17***48 | Valve-Drain; (Fuel Filter) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
236-0962 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
235-4006 Lines Gp-Fuel
| 06***51 | Clamp | 2 |
| 09***86 | Clamp; (Hose) | 3 |
| 14***19 | Connector As | 2 |
191-3517 Pump & Mtg Gp-Unit Inj Hyd
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 18***21 | Pump Group-Fuel Prm & Prim Filter; -With Water Separator-Primary | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep -Primary Fuel Filter
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
172-5780 Pump Gp-Unit Injection
| 17***80 | Pump Group-Unit Injection | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 23***62 | Injector Group-Fuel | 1 |
166-1759 Pump Gp-Unit Injection
| 16***59 | Pump Group-Unit Injection | 1 |
| 17***80 | Pump Group-Unit Injection | 6 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
222-0490 Regulator Gp-Fuel Pressure
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 18***92 | Strap-Grounding | 1 |
| 22***90 | Regulator Group-Fuel Pressure | 1 |
235-4004 Tank Gp-Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***06 | Plug As | 1 |
Hydraulic System
245-3662 Barrel Gp-Motor
| 24***62 | Barrel Group-Motor | 1 |
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3G***73 | Spring; (Inner) | 1 |
3g-7232 Bypass Gp-Filter -Hydraulic Oil
| 15***58 | Flange | 1 |
| 15***59 | Hub | 1 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 8 |
154-6643 Coupling & Mtg Gp-Pump
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 15***43 | Coupling & Mtg Group-Pump | 1 |
| 2D***98 | Seal-O-Ring; (44.12mm Id) | 1 |
171-2446 Cover Gp-Valve End
| 17***46 | Cover Group-Valve End | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 23***57 | Cylinder Group-Hydraulic; -Boom, Saw Tilt, Stick | 2 |
272-3072 Cylinder & Mtg Gp-Boom
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 16 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 12 |
| 11***79 | Support As | 1 |
261-4613 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 08***05 | Stop | 1 |
| 08***33 | Bearing-Sleeve; (106.2mm Od) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
235-4046 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
| 14***35 | Connect Group; (Each Includes) | 4 |
241-3535 Cylinder Ar-Hydraulic -Boom, Saw Tilt, Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 16 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 8 |
| 11***24 | Support As | 1 |
235-8235 Cylinder Gp-Boom
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 23***74 | Pin | 2 |
212-8040 Cylinder Gp-Hood Tilt
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
215-9097 Cylinder Gp-Hydraulic -Stick
| 08***33 | Bearing-Sleeve; (106.2mm Od) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
234-5857 Cylinder Gp-Hydraulic -Boom, Saw Tilt, Stick
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
158-9059 Cylinder Gp-Stick
| 09***55 | Pin | 1 |
| 11***29 | Bolt; (M24x3x100-mm) | 16 |
| 12***87 | Flange-Split | 2 |
235-4012 Drive Ar-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
201-7808 Drive Gp-Swing
| 20***08 | Drive Group-Swing | 2 |
| 20***13 | Motor & Mtg Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
242-3240 Drive Gp-Swing
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
| 18***84 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
126-2075 Filter Gp-Oil -Case Drain
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 4 |
| 1R***92 | Filter Element As-Oil; (Advanced Efficiency) | 3 |
222-7092 Filter Gp-Oil -Hydraulic
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
094-3245 Gauge Gp-Sight -Hydraulic Oil Level
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 10***17 | Seal-O-Ring | 1 |
252-8086 Head Gp-Motor
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 1 |
268-3002 Head Gp-Pump
| 23***09 | Tank Group-Hydraulic | 1 |
| 23***12 | Drive Ar-Swing | 1 |
| 23***13 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
260-9672 Hydraulic Ar -Without Tilt Function
| 21***30 | Kit-Seal; (Control Valve) | 1 |
| 26***72 | Hydraulic Ar; -Without Tilt Function | 1 |
235-4010 Hydraulic Ar -Without Tilt Function
| 23***09 | Tank Group-Hydraulic | 1 |
| 23***10 | Hydraulic Ar; -Without Tilt Function | 1 |
| 23***12 | Drive Ar-Swing | 1 |
245-1969 Kit-Seal -Feed Reducer Plug
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
197-9885 Lever Gp-Control -Hydraulic Lockout
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 8 |
| 19***85 | Lever Group-Control; -Hydraulic Lockout | 1 |
167-7080 Lever Gp-Control -Hydraulic Lockout
| 16***80 | Lever Group-Control; -Hydraulic Lockout | 2 |
| 17***08 | Cover | 1 |
| 9X***40 | Screw-Truss Head; (M10x1.5x25-mm) | 4 |
235-4048 Lines Gp-Boom
| 11***60 | Union | 1 |
| 14***55 | Union As | 6 |
| 15***26 | Union Assembly | 6 |
235-4054 Lines Gp-Boom
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 8 |
| 23***54 | Lines Group-Boom | 1 |
261-4615 Lines Gp-Boom
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 24 |
| 10***93 | Flange | 6 |
| 10***50 | Clamp | 4 |
253-0754 Lines Gp-Front
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 10***93 | Flange | 4 |
| 10***50 | Clamp | 4 |
235-4049 Lines Gp-Front
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 10***93 | Flange | 4 |
| 10***50 | Clamp | 4 |
272-3073 Lines Gp-Front
| 08***45 | Tee | 1 |
| 09***25 | Clip | 1 |
| 11***89 | Hose As | 1 |
235-4017 Lines Gp-Pilot
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 4 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
235-4014 Lines Gp-Pump
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 2 |
| 13***84 | Clip | 1 |
| 14***27 | Connector Group | 2 |
235-4015 Lines Gp-Return
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***80 | Hose As | 1 |
| 12***06 | Plate As | 1 |
261-4612 Lines Gp-Saw
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
| 20***29 | Tag-Identification; (Saw Oil Drain) | 4 |
235-4039 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***80 | Hose As | 1 |
| 12***06 | Plate As | 1 |
241-3524 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***80 | Hose As | 1 |
| 12***06 | Plate As | 1 |
261-4614 Lines Gp-Stick
| 12***86 | Grommet | 2 |
| 13***78 | Hose As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
235-4047 Lines Gp-Stick
| 11***60 | Union | 1 |
| 14***55 | Union As | 6 |
| 15***26 | Union Assembly | 3 |
235-4053 Lines Gp-Stick
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
| 23***53 | Lines Group-Stick | 1 |
241-3747 Lines Gp-Travel Motor
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
206-1513 Motor & Mtg Gp-Swing
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
| 20***13 | Motor & Mtg Group-Swing | 1 |
179-9775 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
188-4175 Motor Gp-Swing
| 11***24 | Setscrew-Socket; (M12x1.75-Thd) | 1 |
| 12***50 | Shim; (1-mm Thk) | 1 |
| 18***75 | Motor Group-Swing | 1 |
241-8418 Motor Gp-Travel
| 24***18 | Motor Group-Travel | 1 |
| 6V***30 | Cap As -Lines From Rotate Valve Work | 5 |
| 6V***32 | Cap As | 4 |
245-9873 Plug Gp-Hydraulic Lines
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***88 | Elbow Group | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
206-6508 Plug Gp-Hydraulic Lines
| 20***08 | Plug Group-Hydraulic Lines | 1 |
| 6V***32 | Cap As | 9 |
235-4013 Pump & Lines Gp-Hyd Tank Fill
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***88 | Elbow Group | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
257-4384 Pump & Lines Gp-Hyd Tank Fill
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 20***05 | Seal Kit; (Includes Seal And Rings) | 0 |
205-5266 Pump & Motor Gp -Hydraulic Tank
| 10***96 | Screen-Filter | 1 |
| 10***97 | Tube | 1 |
| 10***98 | Tube | 1 |
212-8039 Pump & Motor Gp-Hood Tilt
| 21***39 | Pump & Motor Group-Hood Tilt | 1 |
| 24***34 | Pump Group-Piston; -Main Hydraulic, Felling Head | 1 |
| 7X***10 | Bolt-Plt; (7/16unc X 2) | 4 |
235-4045 Pump & Mtg Gp-Main Hydraulic -Felling Head
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
241-3534 Pump Gp-Piston -Main Hydraulic, Felling Head
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
268-8259 Pump Gp-Piston
| 24***62 | Barrel Group-Motor | 1 |
| 24***63 | Shaft Group-Motor | 1 |
| 26***59 | Pump Group-Piston; -Saw | 1 |
218-2977 Pump Gp-Piston -Saw
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
245-3660 Rotating Gp-Motor
| 14***60 | Ring; (Seal) | 2 |
| 17***02 | Pin | 1 |
| 17***03 | Piston As | 7 |
283-5977 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
216-0028 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
216-0034 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
216-0035 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
283-5978 Rotating Gp-Pump
| 17***02 | Pin | 1 |
| 17***10 | Spring | 4 |
| 17***11 | Plate | 1 |
283-5979 Rotating Gp-Pump
| 28***79 | Rotating Group-Pump; -Main Hydraulic | 1 |
| 4I***63 | Rotor Group-Swivel; (Swivel) | 1 |
4i-6263 Rotor Gp-Swivel
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 14***63 | Seal As | 5 |
4i-6262 Rotor Gp-Swivel
| 1U***46 | Sealant (For Locations A) | 0 |
| 4I***62 | Rotor Group-Swivel | 1 |
| 7Y***03 | Rotor | 1 |
159-5871 Swivel Gp -Without Tilt Function
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 8 |
235-4009 Tank Gp-Hydraulic
| 09***43 | Retainer | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 10***02 | Hose As | 1 |
235-4019 Valve & Lines Gp-Travel Cont -Without Tilt Function
| 12***10 | Hose Assem. | 1 |
| 14***09 | Adapter As | 1 |
| 14***34 | Connector Group | 1 |
235-4044 Valve & Mtg Gp-Main Control -7-Bank
| 11***60 | Union | 1 |
| 11***78 | Bracket Assem. | 1 |
| 12***10 | Hose Assem. | 1 |
241-3525 Valve & Mtg Gp-Main Control -7-Bank, With Intermittant Saw
| 09***56 | Setscrew-Socket | 1 |
| 10***04 | Seal-O-Ring | 1 |
| 16***67 | Dowel | 1 |
192-3284 Valve Gp-Counterbalance -Travel Motor
| 19***84 | Valve Group-Brake; -Travel Motor | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***41 | Valve Group-Control; -End Cover | 1 |
194-6973 Valve Gp-Brake -Pressure Release
| 19***94 | Poppet | 1 |
| 19***08 | Spring | 1 |
| 19***81 | Seat | 1 |
192-3293 Valve Gp-Check & Relief -Travel Motor
| 19***93 | Valve Group-Check & Relief; -Travel Motor | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***46 | Kit-Valve | 1 |
227-2141 Valve Gp-Control -End Cover
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***41 | Valve Group-Control; -End Cover | 2 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
227-2133 Valve Gp-Control -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
256-0520 Valve Gp-Control -Head Tilt-Hf, Blank-Hp
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 25***20 | Valve Group-Control; -Head Tilt-Hf, Blank-Hp | 1 |
244-7363 Valve Gp-Control -Stick
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
242-4240 Valve Gp-Control -Intermittent Saw, 2-Bank
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
244-7364 Valve Gp-Control -Lateral Tilt-Hf, Rotator-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
247-7010 Valve Gp-Control -Saw Motor Control
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 24***10 | Valve Group-Control; -Saw Motor Control | 1 |
242-4238 Valve Gp-Control -Travel, 2-Bank
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
244-7365 Valve Gp-Control -Swing
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
244-7237 Valve Gp-Control -Travel
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
247-9847 Valve Gp-Control -Inlet
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
244-7362 Valve Gp-Control -Boom
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2131 Valve Gp-Control -Travel
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
105-8117 Valve Gp-Counterbalance -Hood Tilt Cylinder
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 12***96 | Pin | 2 |
| 12***98 | Seat | 2 |
242-4236 Valve Gp-Main Control -7-Bank
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 3 |
| 24***36 | Valve Group-Main Control; -7-Bank | 1 |
| 3E***05 | Valve Group-Solenoid; -Variable Fan Speed | 1 |
218-1811 Valve Gp-Manifold & Reducing -Pilot Oil
| 12***94 | Plug; (Break Off) | 5 |
| 12***17 | Plug | 1 |
| 15***85 | Dowel | 2 |
198-3811 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***81 | Seat | 2 |
270-3521 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
184-3830 Valve Gp-Relief -Swing Motor
| 10***66 | Adapter | 2 |
| 18***30 | Valve Group-Relief; -Swing Motor | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
167-1555 Valve Gp-Selector & Press Cont -Boom
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
3e-9205 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
116-3526 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 15***38 | Cartridge Assem. | 1 |
152-8340 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
171-3685 Valve Gp-Solenoid
| 17***85 | Valve Group-Solenoid | 2 |
| 22***64 | Cartridge As-Valve | 2 |
| 23***36 | Seal Kit; (Includes Seals And Rings) | 1 |
315-4412 Valve Gp-Solenoid
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
222-5781 Valve Gp-Solenoid & Manifold -Disc Saw
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
Implements
235-4051 Boom Gp
| 19***27 | Bracket As | 2 |
| 23***51 | Boom Group | 1 |
| 24***33 | Hose As | 2 |
261-4560 Boom Gp
| 19***27 | Bracket As | 2 |
| 24***33 | Hose As | 2 |
| 24***28 | Hose As | 1 |
235-4041 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
235-4055 Lines Gp-Grease -Boom, Stick
| 23***37 | Wiring Group-Lighting; -Boom Floodlights | 1 |
| 23***38 | Lines Group-Grease; -Felling Head Linkage | 1 |
| 23***39 | Lines Group-Saw | 1 |
235-4038 Lines Gp-Grease -Felling Head Linkage
| 19***27 | Bracket As | 2 |
| 23***38 | Lines Group-Grease; -Felling Head Linkage | 1 |
| 24***33 | Hose As | 2 |
261-4611 Lines Gp-Grease -Boom, Stick
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
| 23***35 | Wiring Group-Lighting; -Stick Floodlights | 1 |
| 23***44 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
272-3071 Linkage Ar-Felling Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
235-4050 Linkage Ar-Felling Head
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
| 23***44 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 23***45 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
235-4040 Linkage Ar-Felling Head
| 23***40 | Linkage Ar-Felling Head | 1 |
| 23***43 | Linkage Group | 1 |
| 23***44 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
261-4559 Linkage Ar-Felling Head
| 23***37 | Wiring Group-Lighting; -Boom Floodlights | 1 |
| 23***38 | Lines Group-Grease; -Felling Head Linkage | 1 |
| 23***41 | Boom Group | 1 |
241-3523 Linkage Ar-Intermittent Saw
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
235-4043 Linkage Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
235-4042 Stick Gp
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***15 | Shim (2.0 mm Thick) | 4 |
| 09***54 | Seal; (Id=79.85mm) | 4 |
261-4561 Stick Gp
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 09***15 | Ring-Retaining | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 1 |
235-4052 Stick Gp
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 23***52 | Stick Group | 1 |
| 24***86 | Plate | 2 |
Lubrication System
226-3560 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 22***60 | Filler Group-Engine Oil | 1 |
| 22***65 | Tube As | 1 |
220-1998 Filter Gp-Engine Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 14***64 | Stud; (M8x1.25x35-mm) | 1 |
226-3559 Fumes Disposal Gp
| 22***18 | Bracket | 1 |
| 22***34 | Hose-Fumes Disposal | 1 |
| 22***59 | Fumes Disposal Group | 1 |
219-9960 Gauge Gp-Oil Level (Dipstick) -Engine
| 18***16 | Tube As-Guide; (Rh) | 1 |
| 21***59 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 21***60 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
202-6603 Lines Gp-Engine Oil
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***03 | Lines Group-Engine Oil | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 16***65 | Lines Group-Turbocharger Oil | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
195-8098 Pump Gp-Engine Oil
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 21***22 | Pump As-Engine Oil | 1 |
| 21***46 | Gerotor Pump Group | 1 |
Machine Arrangement
258-6521 Chassis Ar
| 23***04 | Tank Group-Fuel | 1 |
| 23***06 | Lines Group-Fuel | 1 |
| 25***23 | Frame Group-Upper | 1 |
235-4000 Chassis Ar
| 21***07 | Mounting Group-Cab | 1 |
| 23***00 | Chassis Ar | 1 |
| 23***01 | Frame Group-Upper | 1 |
257-8549 Common Ar
| 23***94 | Plate & Film Group | 1 |
| 23***20 | Installation Ar-Engine | 1 |
| 23***26 | Cooling Ar | 1 |
235-3998 Common Ar
| 21***01 | Cab Ar-Enclosed Rops | 1 |
| 23***94 | Plate & Film Group | 1 |
| 23***98 | Common Ar | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 18***54 | Filter Element-Cab Air | 1 |
| 19***60 | Air Conditioner Group | 1 |
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
178-5524 Adjustment Gp-Console
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 17***24 | Adjustment Group-Console | 1 |
| 24***04 | Air Conditioner Group | 1 |
197-4107 Air Conditioner & Mounting Gp
| 17***62 | Duct | 1 |
| 17***63 | Duct As | 1 |
| 18***09 | Duct | 1 |
243-6303 Air Conditioner & Mounting Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 16***43 | Timer As-On Delay; (24-Volt)(Compressor Cycle Limiter) | 1 |
243-6304 Air Conditioner Gp
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
250-0398 Air Conditioner Gp
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
238-1027 Air Conditioner Gp
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
199-3160 Air Conditioner Gp
| 17***63 | Duct As | 1 |
| 19***05 | Gasket | 1 |
| 19***60 | Air Conditioner Group | 1 |
234-6607 Armrest Gp -Lh
| 19***19 | Window Group-Cab | 1 |
| 19***20 | Door Group-Cab | 1 |
| 21***40 | Door Group-Access; -Cab Roof | 1 |
234-6606 Armrest Gp -Rh
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 19***13 | Duct Group-Cab Air | 1 |
213-2401 Cab Ar-Enclosed Rops
| 19***19 | Window Group-Cab | 1 |
| 21***01 | Cab Ar-Enclosed Rops | 1 |
| 25***33 | Rops Group-Enclosed | 1 |
238-5013 Cab Gp-Enclosed Rops
| 10***74 | Seal-Connector | 10 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
238-5010 Cab Gp-Enclosed Rops
| 17***29 | Case Group-Heater & Evaporator | 1 |
| 18***19 | Screw-Hex Flange; (M5x2.24x14-mm) | 6 |
| 18***56 | Switch As-Pressure; (Air Conditioner, Low Side) | 1 |
217-2440 Cab Gp-Enclosed Rops
| 21***40 | Cab Group-Enclosed Rops | 1 |
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 23***12 | Door Group-Cab | 1 |
222-5420 Cab Gp-Enclosed Rops
| 22***20 | Cab Group-Enclosed Rops | 1 |
| 23***60 | Plate | 1 |
| 23***08 | Window Group-Cab; -Side | 1 |
199-3159 Case Gp-Air Conditioner
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
246-7154 Case Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
177-6729 Case Gp-Heater & Evaporator
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 8 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 15***99 | Nut | 8 |
226-3561 Compressor Gp-Refrigerant
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 5 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 6 |
| 15***99 | Nut | 10 |
223-0052 Console Gp-Operator
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
204-6974 Console Gp-Operator -Rh
| 18***84 | Cover | 1 |
| 20***74 | Console Group-Operator; -Rh | 1 |
| 24***23 | Console Group-Operator; -Lh | 1 |
245-7923 Console Gp-Operator -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***73 | Plate | 4 |
243-5686 Console Gp-Operator
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
161-3759 Console Gp-Operator -Lh
| 15***75 | Ladder Clip | 2 |
| 16***59 | Console Group-Operator; -Lh | 2 |
| 17***08 | Cushion As-Arm | 1 |
245-7924 Console Gp-Operator -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***73 | Plate | 4 |
223-0671 Control & Mtg Gp-Joystick -Harvester Head
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
| 23***13 | Control Group-Hydraulic Pedal | 1 |
| 23***22 | Plate As | 1 |
224-4990 Control & Mtg Gp-Joystick -Felling Head
| 10***51 | Loom; (39 cm) | 0 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***08 | Switch As-Limit | 10 |
238-8167 Control & Mtg Gp-Pedal
| 10***51 | Loom; (39 cm) | 0 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***08 | Switch As-Limit | 10 |
223-0715 Control Gp-Handle -Harvester Head, Lh
| 17***08 | Switch As-Limit | 8 |
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 26***01 | Film-Overlay; (6-Button, 11.5-mm) | 1 |
235-4122 Control Gp-Handle -Felling Head
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 2 |
223-0716 Control Gp-Handle -Harvester Head, Rh
| 11***49 | Pedal Assem.; (L.H.) | 1 |
| 11***50 | Pedal Assem.; (R.H.) | 1 |
| 11***56 | Step Assem. | 2 |
231-2613 Control Gp-Hydraulic Pedal
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***13 | Control Group-Hydraulic Pedal | 1 |
272-7088 Control Gp-Joystick -Harvester Head, Lh
| 17***33 | Lamp; (Red) | 1 |
| 18***71 | Cover | 1 |
| 19***06 | Screw-Truss Head; (M5x0.8x16-mm) | 4 |
272-7089 Control Gp-Joystick -Harvester Head, Rh
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***97 | Door As-Access; (Cab Roof) | 1 |
272-7087 Control Gp-Joystick -Felling Head
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***87 | Control Group-Joystick; -Felling Head | 1 |
241-4146 Control Gp-Monitor -Iqan
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 20***05 | Latch As | 1 |
| 24***46 | Control Group-Monitor; -Iqan | 1 |
256-7304 Door Gp-Access -Cab Roof
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***06 | Fastener | 15 |
256-1296 Door Gp-Access -Cab Roof
| 03***72 | Pin-Clevis | 2 |
| 09***55 | Clip | 2 |
| 09***87 | Channel-Trim | 0 |
212-4540 Door Gp-Access -Cab Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 21***40 | Door Group-Access; -Cab Roof | 1 |
| 25***81 | Door As-Access; (Cab Roof) | 1 |
237-2374 Door Gp-Access -Air Filter
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***29 | Block | 2 |
238-5012 Door Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***17 | Louver As | 1 |
| 11***94 | Hose; (66-cm) | 0 |
197-4720 Door Gp-Cab
| 09***55 | Clip | 2 |
| 10***61 | Guard | 1 |
| 10***44 | Latch As-Rotary | 1 |
254-9336 Door Gp-Cab
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 19***21 | Duct | 1 |
239-1378 Duct Gp-Cab Air
| 23***78 | Duct Group-Air | 1 |
| 25***48 | Window; (Center) | 1 |
| 25***50 | Window; (Left) | 1 |
197-2913 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 16***74 | Louver As-Vent | 10 |
199-5134 Duct Gp-Cab Air
| 19***34 | Duct Group-Cab Air | 1 |
| 24***20 | Plate | 2 |
| 24***34 | Angle As | 1 |
250-0861 Frame Gp-Window
| 1K***50 | Spring | 1 |
| 22***53 | Plate | 4 |
| 22***54 | Plate-Mounting | 4 |
258-0699 Frame Gp-Window -Thick Glass
| 19***90 | Angle | 1 |
| 19***91 | Guard As | 1 |
| 25***99 | Frame Group-Window; -Thick Glass | 1 |
235-4003 Guard Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 23***03 | Guard Group-Cab | 1 |
| 6V***92 | Screw-Machine; (M4x0.7x25-mm) | 1 |
197-9880 Guard Gp-Window
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 19***80 | Guard Group-Window | 1 |
| 25***04 | Window-Roof; (Cab) | 1 |
213-0235 Handle Gp-Door -Cab
| 17***90 | Plate | 1 |
| 17***99 | Gasket | 1 |
| 17***05 | Case; (Bottom) | 1 |
253-9594 Hatch Gp-Roof
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
202-9627 Housing Gp-Air Conditioner -Outlet Air
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
199-3156 Housing Gp-Air Conditioner -Inlet Air
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
251-6761 Housing Gp-Air Conditioner -Outlet Air
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
220-8420 Installation Gp-Radio
| 22***20 | Installation Group-Radio | 1 |
| 25***25 | Foam | 1 |
| 26***60 | Foam | 1 |
238-5024 Installation Gp-Radio
| 12***98 | Bracket Assem. | 1 |
| 14***11 | Adapter Group | 1 |
| 16***73 | Valve Group-Shutoff | 2 |
263-2766 Liner Gp-Cab
| 12***98 | Bracket Assem. | 1 |
| 14***11 | Adapter Group | 1 |
| 16***73 | Valve Group-Shutoff | 2 |
259-5618 Lines Gp-Air Conditioner
| 11***31 | Mount Assem. | 8 |
| 24***98 | Sleeve | 8 |
| 24***39 | Washer; (32x135x12-mm Thk) | 6 |
235-4007 Lines Gp-Air Conditioner
| 13***62 | Mount | 8 |
| 13***63 | Sleeve; (36-mm) | 4 |
| 19***40 | Washer As | 3 |
212-8007 Mounting Gp-Cab
| 21***07 | Mounting Group-Cab | 1 |
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
251-6137 Mounting Gp-Cab
| 09***24 | Plug-Button | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 2 |
238-5004 Operator Ar
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 19***53 | Tread | 1 |
222-5418 Panel Gp-Instrument
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 13***13 | Bolt; (M10x1.5x16-mm) | 2 |
| 22***18 | Panel Group-Instrument | 1 |
222-5412 Platform Gp-Operator
| 19***54 | Sleeve | 1 |
| 22***12 | Platform Group-Operator | 1 |
238-5020 Platform Gp-Operator
| 13***90 | Bushing; (Radio Mount) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***25 | Radio Group; (Am/Fm Cassette, Cd Changer)(Deluxe W/ Remote Capabilities) | 1 |
200-5731 Radio Gp -Am/Fm/Wb
| 19***54 | Sleeve | 1 |
| 20***31 | Radio Group; -Am/Fm/Wb | 1 |
331-5292 Radio Gp -Am, Fm
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
224-7213 Radio Gp -Am/Fm Cassette, Cd Changer
| 22***13 | Radio Group; -Am/Fm Cassette, Cd Changer | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 2 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
201-4436 Seat Belt Gp -Retractable
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
161-3781 Seat Gp
| 16***81 | Seat Group | 2 |
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
242-3122 Seat & Mounting Gp -High Back, Tilt
| 16***03 | Suspension Group-Seat | 1 |
| 16***06 | Seat Group | 1 |
| 17***65 | Screw-Truss Head | 4 |
229-9090 Seat Gp -High Back, Tilt
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 2 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
188-0886 Seat Gp-Suspension
| 16***43 | Support As; (Seat) | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 23***57 | Support As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
161-3757 Support Gp-Seat
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
235-8856 Support Gp-Seat
| 17***54 | Cover Group-Seat; (Suspension) | 1 |
| 17***55 | Kit-Seat Adjuster; (Upper) | 1 |
| 17***56 | Kit-Seat Adjuster; (Lower) | 1 |
235-4060 Suppression Ar-Fire
| 14***21 | Kit-Clip; (Seat) | 1 |
| 23***60 | Suppression Ar-Fire | 1 |
| 24***68 | Cover As | 1 |
245-7892 Suspension Gp-Seat
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 20***61 | Hose As | 1 |
| 22***64 | Handle As | 1 |
229-9077 Suspension Gp-Seat
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***39 | Support-Filter | 1 |
| 13***45 | Stop-Rubber | 4 |
164-0503 Suspension Gp-Seat
| 16***03 | Suspension Group-Seat | 1 |
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
238-5025 Trim Gp-Cab
| 13***30 | Hinge-Lh | 2 |
| 15***15 | Gasket | 1 |
| 19***87 | Frame As-Lower | 1 |
222-5417 Trim Gp-Cab
| 14***04 | Screw-Button Head; (M8x1.25x35-mm) | 4 |
| 16***16 | Spacer; (10x16x20-mm Thk) | 4 |
| 19***45 | Window | 1 |
197-2919 Window Gp-Cab
| 19***19 | Window Group-Cab | 1 |
| 23***07 | Window; (Rear) | 1 |
| 23***49 | Window; (Right Side, Front) | 1 |
266-3093 Window Gp-Cab -Front
| 1U***84 | Holder As; (Grease Gun) | 1 |
| 26***93 | Window Group-Cab; -Front | 1 |
| 3W***03 | Tool Box | 1 |
195-0440 Window Gp-Cab -Front
| 19***40 | Window Group-Cab; -Front | 1 |
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***21 | Window-Rh | 1 |
238-5008 Window Gp-Cab -Side
| 19***60 | Window-Front | 1 |
| 19***63 | Plate | 1 |
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 14 |
196-2392 Window Gp-Cab -Lh
| 19***40 | Window Group-Cab; -Front | 1 |
| 19***92 | Window Group-Cab; -Lh | 2 |
| 19***21 | Window-Rh | 1 |
197-9956 Window Gp-Cab
| 19***56 | Window Group-Cab | 1 |
| 24***34 | Plate | 2 |
| 24***35 | Plate | 1 |
197-9865 Window Gp-Front
| 19***65 | Window Group-Front | 1 |
Power Train
241-8402 Drive Gp-Final
| 09***29 | Ring; (Retaining) | 5 |
| 09***44 | Ring-Retaining | 5 |
| 13***05 | Ring-Retaining | 1 |
241-1868 Final Drive Gp -With Travel Motor
| 24***68 | Final Drive Group; -With Travel Motor | 1 |
| 24***02 | Drive Group-Final | 1 |
| 24***18 | Motor Group-Travel | 1 |
Service Equipment And Supplies
235-4005 Box Gp-Tool
| 23***05 | Box Group-Tool | 1 |
269-5489 Film-Instruction -Joystick Control, Pattern 4
| 26***89 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
259-1068 Film-Instruction -Joystick Control, Pattern 1
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
269-5491 Film-Instruction -Joystick Control, Pattern 6
| 26***91 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5492 Film-Instruction -Joystick Control, Pattern 7
| 17***03 | Film-Identification; (300-Ft) | 2 |
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***42 | Film-Warning; (Trip Point) | 1 |
269-5775 Film-Instruction -Joystick Control, Pattern 2
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
269-5490 Film-Instruction -Joystick Control, Pattern 5
| 26***90 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
269-5488 Film-Instruction -Joystick Control, Pattern 3
| 26***88 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
228-9470 Plate & Film Gp -English
| 22***70 | Plate & Film Group; -English | 1 |
235-3994 Plate & Film Gp
| 23***94 | Plate & Film Group | 1 |
Undercarriage
297-9152 Adjustment Gp-Hydraulic Track
| 19***00 | Bolt-12 Point Head | 8 |
| 22***89 | Spacer; (31.75x60x76.2-mm Thk) | 20 |
| 22***90 | Spacer | 4 |
236-1883 Fastener Gp-Carbody
| 23***63 | Frame As | 1 |
| 23***83 | Fastener Group-Carbody | 1 |
| 23***85 | Plate | 1 |
237-9774 Frame Gp-Carbody
| 22***68 | Frame As; (Rh) | 1 |
| 22***69 | Frame As; (Lh) | 1 |
| 23***74 | Frame Group-Carbody | 1 |
224-9641 Frame Gp-Track Roller
| 12***34 | Bolt; (M24x3x340-mm) | 16 |
| 15***55 | Spacer | 16 |
| 15***70 | Guard As-Trk | 8 |
152-8569 Guard Gp-Track Guide
| 15***69 | Guard Group-Track Guide | 1 |
| 19***04 | Cover | 2 |
| 8T***84 | Capscrew; (Hex Hd) (M12 X 1.75 X 45l Gr 10.9) | 16 |
190-5406 Guard Gp-Travel Motor
| 10***81 | Seal Group-Duo-Cone | 2 |
| 11***47 | Idler & Bearing As | 1 |
| 19***06 | Washer, Guard Group-Travel Motor | 1 |
245-6551 Idler Gp-Front
| 20***83 | Link-Track; (Rh) | 47 |
| 20***84 | Link-Track; (Lh) | 47 |
| 22***29 | Bushing-Track | 46 |
245-6550 Idler Gp-Front
| 10***52 | Idler Group-Front | 1 |
| 24***50 | Idler Group-Front | 1 |
| 24***52 | Spring Group-Recoil | 1 |
102-8152 Idler Gp-Front
| 09***80 | Setscrew; (Socket) (M16x2x20mm) | 4 |
| 10***52 | Idler Group-Front | 1 |
| 24***51 | Idler Group-Front | 2 |
256-6081 Link As-Track
| 22***05 | Roller Group-Track | 4 |
| 25***81 | Link As-Track | 1 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 16 |
336-7738 Roller Ar-Track -Star
| 14***56 | Roller Group-Track-Single Flange | 22 |
| 33***38 | Roller Ar-Track; -Star | 1 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 88 |
152-8574 Roller Ar-Track & Carrier
| 15***74 | Roller Ar-Track & Carrier | 1 |
| 18***79 | Roller Group-Track-Double Flange | 18 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 72 |
224-9642 Roller Ar-Track & Carrier
| 18***74 | Roller Group-Track-Single Flange | 1 |
| 22***42 | Roller Ar-Track & Carrier | 1 |
228-6405 Roller Gp-Track
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
| 17***99 | Dowel | 2 |
183-2879 Roller Gp-Track-Double Flange
| 10***85 | Seal Group-Duo-Cone | 2 |
| 13***15 | Shaft-Track Roller | 1 |
| 14***58 | Roller & Bearing As | 1 |
140-2456 Roller Gp-Track-Single Flange
| 14***56 | Roller Group-Track-Single Flange | 1 |
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
183-2874 Roller Gp-Track-Single Flange
| 10***20 | Support | 1 |
| 11***02 | Support As | 1 |
| 18***74 | Roller Group-Track-Single Flange | 1 |
245-6552 Spring Gp-Recoil
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 188 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 188 |
| 24***52 | Spring Group-Recoil | 1 |
7y-1635 Adjustment Gp-Hydraulic Track
| 09***09 | Ring-Back Up; (Backup) | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 19***53 | Seal; (Wiper) | 1 |
256-6082 Track Gp
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 188 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 188 |
| 25***81 | Link As-Track | 1 |
258-8330 Track Gp
| 25***30 | Track Group | 3 |
240-2745 Undercarriage Ar
| 24***45 | Undercarriage Ar | 1 |
| 24***53 | Undercarriage Ar | 1 |
| 25***30 | Track Group | 2 |
241-1871 Undercarriage Ar -Tilting
| 12***51 | Barrel | 1 |
| 12***52 | Plate-Control | 1 |
| 12***53 | Pin-Center | 1 |
240-2746 Undercarriage Ar
| 24***46 | Undercarriage Ar | 1 |
| 24***53 | Undercarriage Ar | 1 |
| 25***82 | Track Group | 2 |
240-2744 Undercarriage Ar
| 24***44 | Undercarriage Ar | 1 |
| 25***82 | Track Group | 2 |
241-1870 Undercarriage Ar -Tilting
| 15***69 | Guard Group-Track Guide | 1 |
| 15***74 | Roller Ar-Track & Carrier | 1 |
| 16***09 | Sprocket Group | 2 |
240-2752 Undercarriage Ar -Without Tilt Function
| 15***35 | Gear & Bearing Group-Swing | 1 |
| 23***83 | Fastener Group-Carbody | 1 |
| 23***74 | Frame Group-Carbody | 1 |
240-2747 Undercarriage Ar
| 15***35 | Gear & Bearing Group-Swing | 1 |
| 23***83 | Fastener Group-Carbody | 1 |
| 23***74 | Frame Group-Carbody | 1 |
240-2753 Undercarriage Ar
| 15***69 | Guard Group-Track Guide | 1 |
| 16***09 | Sprocket Group | 2 |
| 16***29 | Sprocket-Track | 1 |
TK751 serial number reference
The PIN plate on a Cat TK751 is mounted on the machine frame near the operator cab entry, on the same plate style used across the TK7xx track feller buncher line. The full PIN reads as a 3-character prefix (e.g. 301) followed by a sequential unit number; the prefix identifies the model/engine configuration and the digits that follow track production order, not calendar year. Cross-check the prefix against the plate on the machine or a dealer SIS lookup before ordering prefix-specific parts like turbos or filters.
| Prefix | Identifies | Notes |
|---|---|---|
| 301 | TK751 Track Feller Buncher (Cat 551 platform, part of the 541/551/552 full tail-swing line), C9 ACERT engine | Sole confirmed prefix for the TK751. Independent parts and service-manual listings consistently tie 'TK751 Prefix 301' together, and no second prefix split (engine tier, undercarriage width, or generation) turns up anywhere. The 541/551/552 full tail-swing family runs the electronically controlled Cat C9 ACERT diesel, matching the C9 fitment tied to this prefix. Confirm the exact serial break against the plate on the machine or dealer SIS before ordering prefix-specific parts like turbos or filters. |
Frequently asked questions
What engine does the Caterpillar TK751 forestry carrier use?
A Cat C9 ACERT diesel rated at approximately 305 hp (227 kW) gross and 282 hp (210 kW) net, certified to the Tier 2/Tier 3 emissions standards in force when it was built.
What is the operating weight of the TK751?
Roughly 68,469 to 69,175 lb (31,057 to 31,377 kg) depending on configuration — feller buncher dress versus track harvester/processor base — with heavier attachment options pushing working weight higher. Treat any single figure as configuration-dependent.
What replaced the Caterpillar TK751 (551)?
Caterpillar never carried the 551 forward under a "Series 2" nameplate the way it did the 541 and 552. The closest current-production equivalents in Cat's full tail swing lineup are the 541 Series 2 (smaller class) and 552 Series 2 (larger class); the 551's mid-size slot wasn't directly replaced under its own name.
What TK751 owners discuss
What engine is actually in the TK751, and what should an owner know about it going in?
The TK751 carries the electronically controlled C9 ACERT, Tier 2 tune, turbocharged, running the HEUI-style hydraulic-actuated fuel system shared across that C9 generation. The recurring theme with these engines is injector sensitivity to fuel cleanliness — any grit or water in the fuel shows up as slow power loss, smoke, and rough running well before a fault code ever lights up. Keep fuel filtration tight and change filters on schedule rather than by feel. A lot of ACERT-era complaints also trace back to a sensor reading out of range, not an actual mechanical failure, so check sensor resistance/range against spec before condemning an injector or the fuel pump. Have your dealer verify any persistent or repeating fault code before authorizing injector or HEUI pump replacement.
How does the felling head hydraulics behave, and what wears first?
The disc-saw head paired with this era of Cat track feller buncher runs a variable-displacement piston motor with a built-in anti-cavitation valve, meant to protect the motor when the disc free-spins or the head unloads suddenly during a cut. If saw recovery feels sluggish, or the disc hesitates before it spools back up to speed, that valve is the first thing to check, not the motor itself. The saw shaft rides on a double-tapered roller bearing pack up front and a single-row cylindrical pack behind it; skipped grease intervals show up there first as shaft play before anything else on the head starts acting up.
What undercarriage or wear pattern is typical for a machine like this?
Being a tracked carrier, the whole point of the TK751's undercarriage is low ground pressure on soft, wet cutting ground where a wheeled unit would rut out or get stuck. Because of that, wear on sprockets, rollers, and pads tracks the terrain the machine actually worked, not just the hour meter — steep, rocky, or heavily obstructed ground eats an undercarriage far faster than flat, cleared ground at the same hours. When comparing used machines, ask about the ground it cut, not just the number on the clock.
Are there common electrical or sensor complaints tied to this machine?
The TK751 shares wiring architecture with the rest of the TK7xx track feller buncher line and with the 330C-family excavator base it's built from, so the same electrical gremlins reported across that group tend to show up here too: connector corrosion from working wet, muddy logging sites, and harness chafe near the boom and swing pivot where it flexes constantly. Before chasing an intermittent sensor fault, pull and inspect the connectors in those areas — corrosion and chafe cause more sensor complaints than actual failed sensors do.
Is there a second generation or letter-suffix version of the TK751 to watch for?
Not that's publicly documented — the TK751 appears to run as a single generation on one serial prefix (301), paired with the C9 Tier 2 engine throughout its production. Unlike some Cat model lines that got a mid-life engine or drivetrain change under the same base number, there's no confirmed B or C variant tied to this number. Treat any claim of a distinct second-generation TK751 with skepticism unless a dealer or parts lookup on the actual serial confirms a different prefix.
What should a buyer physically check on a used TK751 before making an offer?
Pull the serial prefix first and confirm it actually reads as a TK751 (301 prefix) rather than a sibling in the TK7xx family — parts and service data get mixed up easily across TK711/721/722/732/741/751/752 since they share so many common components. Then work the machine: cycle the saw head and listen/feel for hesitation on recovery (points to the anti-cavitation valve or motor), check saw shaft bearing play, look at fuel filter and injector replacement history for signs of past contamination, and walk the undercarriage against the machine's stated working ground rather than hours alone. Check harness connectors near the swing frame and boom pivot for corrosion or chafe. Have your dealer verify fault code history and run a hydraulic pressure check before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific TK751 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.