Caterpillarforest productstrack feller buncher
Caterpillar TK722
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar TK722 is a tracked feller buncher for forest-products and logging work, built on a Cat 330-series excavator/swing-machine chassis carried over from TimberKing heritage. It is part of a numbered sibling family that runs from TK711 through TK721, TK722, TK732, TK741, TK751, and TK752. Engine fitted varies by build year: early-production TK722 units carry the Cat 3126, a 7.2 L (441 cu in) inline-six diesel, while later-production units carry the Cat C-9, an 8.8 L (536 cu in) inline-six; no single horsepower figure is documented for this exact configuration. Operating weight runs approximately 30,410 kg (67,040 lb) as configured with cab and a standard felling head, and shifts with the disc-saw or shear attachment fitted. The carrier mounts factory-line disc-saw felling heads, including continuous-rotation and lateral-tilt styles with roughly 560 mm (22 in) cut capacity, attached through a purpose-built forestry boom wrist and self-leveling linkage rather than a generic excavator quick coupler. No confirmed direct successor model is documented for the TK722 specifically.
The main split across this machine's production run is the engine change from the Cat 3126 to the Cat C-9, which carries through to the fuel system, ECU, and wiring harness and means parts sourcing and service procedures differ depending on which engine a given unit carries. No verified serial-number prefix has surfaced for the TK722, so confirming engine and configuration from the machine's own data plate matters more than usual on this model. In the used and parts market, the TK722 remains relevant because it shares chassis, hydraulic componentry, and undercarriage design with the wider 330-series excavator platform, giving buyers and rebuilders a broad base of compatible parts even though the buncher-specific felling head and boom hardware are unique to the forestry line. Forestry duty wears the undercarriage and the felling-head leveling linkage faster than comparable construction use, which shapes what to check before buying and what drives major component replacement on a used unit. Cat's current feller buncher lines, including the 511, 521, 522, 541, and 552 series, cover the same class of work today, though no documented lineage ties them directly back to the TK722.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar TK722 specifications
Engine
| Engine model | Cat 3126 diesel, inline-6, on in-service TK722 units; parts and ECU cross-references also tie the TK722 to the Cat C-9 (and C7) diesel, so the engine fitted varies by build year and serial range — check the machine's serial prefix or data plate to confirm which engine is installed |
| Displacement | 3126: 7.2 L (441 cu in); C-9: 8.8 L (536 cu in), depending on which engine option is fitted |
| Cylinders | 6, on both engine options |
| Gross/net power | Not published for this specific machine configuration — the 3126 family spans a wide power band across different ratings, so no single figure can be assigned to the TK722 without confirming the exact engine rating from the data plate |
| Emissions tier | Not documented for this model |
Weights
| Operating weight | 30,410 kg (67,040 lb), as configured with cab and a standard felling head; actual weight shifts with the cutting head/saw or shear attachment fitted |
| Shipping weight | Not documented separately from operating weight for this model |
| Ground pressure | Not published for this model |
Dimensions
| Transport length | 4.80 m (15 ft 9 in), standard configuration |
| Transport width | 3.20 m (10 ft 6 in), standard configuration; varies with track shoe width and felling head fitted |
| Transport height | 3.81 m (12 ft 6 in), standard configuration; varies with cab and head fitted |
| Track gauge | Not documented for this model |
| Ground clearance | Not documented for this model |
Performance
| Travel speed | Not published for this model |
| Gradeability | Not published for this model |
| Felling/cutting performance | Not documented as a base-machine figure — cutting capacity depends on the saw or shear head attached, which is sold and specified separately from the carrier |
Service capacities (summary)
| Fuel tank | Not documented for this model |
| Hydraulic system | Not documented for this model |
| Engine oil | Not documented for this model |
| Cooling system | Not documented for this model |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
TK722 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter (Cat C9; early-production units use Cat 3126) | Approx. 35.6 L (9.4 US gal) with filter change, based on the C9 diesel this Track Feller Buncher family (TK711 through TK752) shares with the 330-series excavator/swing-machine chassis it is built on. Earlier-build TK722 units carry the Cat 3126 instead of the C9; a separate crankcase figure for the 3126 variant is not confirmed for this model. Verify against the OMM for your exact serial range. | Cat DEO or Cat DEO-ULS diesel engine oil. Grade by ambient temperature per the standard multigrade chart - SAE 15W-40 for general temperate service, stepping down to SAE 10W-30 or 0W-40 for cold starts. |
| Cooling system | Approx. 37.9 L (10 US gal), consistent with the C9 engine's cooling-system capacity on the shared 330-family chassis. Not published as a standalone TK722 figure in available documentation. | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), mixed to the standard 50/50 ratio; heavier concentration only for extreme-cold service per the coolant/antifreeze table. |
| Fuel tank | Not confirmed for the TK722 specifically. Comparable 330-family swing-machine chassis run roughly 400 to 620 L (105 to 163 US gal) depending on configuration; the purpose-built feller-buncher deck may carry a different tank size. Confirm against the OMM by serial number. | No. 2-D diesel fuel meeting the standard ASTM D975 (or EN 590 equivalent) specification; use an arctic-grade or winter-blended fuel below freezing per the cold-weather fuel guidance. |
| Hydraulic system, including tank | Not separately published for the TK722. The shared C9-engine/330-family hydraulic architecture runs on the order of 400 L (105 US gal) including tank; the felling-head and saw circuits on this buncher may shift the figure. Verify by serial number against the OMM. | Cat HYDO Advanced 10 (drivetrain-oil-compatible hydraulic fluid typical of this machine era). Select viscosity by ambient temperature per the hydraulic oil viscosity chart. |
| Swing drive | Approx. 19 L (5 US gal), based on the swing-drive housing shared across the 330-family swing-machine platform this buncher chassis derives from. Not confirmed in a TK722-specific table. | Cat TDTO (Transmission/Drive Train Oil), multigrade, graded by ambient temperature per the drivetrain oil viscosity chart. |
| Final drive, each (two required) | Approx. 15.2 L (4 US gal) per side, consistent with the final-drive capacity on the shared 330-family undercarriage. Not independently confirmed for the TK722. | Cat TDTO (Transmission/Drive Train Oil), graded by ambient temperature. |
| Grease, all points (spec only) | No reservoir capacity applies; lubricate fittings at scheduled hourly service intervals. | Cat Extreme Application (XTM) grease or Cat Multipurpose Grease (Cat MPGM). Select NLGI grade by ambient temperature - standard NLGI 2 for temperate service, lighter arctic-grade grease below freezing. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar TK722 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the TK722 beyond the schedule
Predictive Maintenance & Fluid Analysis
The HEUI fuel system on both the 3126 and C-9 is sensitive to oil and fuel cleanliness, so a standing oil-sample program is the best early warning for HEUI pump wear and injector contamination on either engine. Pair it with hydraulic oil sampling to trend main pump and swing motor wear, and coolant testing to catch aftercooler and radiator fouling early, since forestry debris packs these cores faster than general excavation duty. Track undercarriage wear measurements on a schedule given this machine's documented accelerated wear pattern in forestry service.
Corrective & Common Repairs
Weak swing torque on the felling head is usually low hydraulic oil or main pump wear, not the swing motor itself; check tank level and filters first. Intermittent fault codes near the cab and boom are typically harness chafe or connector corrosion from limb contact rather than sensor failure, so wiggle-test wiring before replacing electronics. Damaged saw teeth must be replaced in matched opposite pairs to keep the disc balanced, and a sloppy-feeling leveling wrist signals worn linkage bushings or pins before an outright failure.
Overhaul & Rebuild Points
Major rebuild points on the TK722 center on the felling-head wrist leveling linkage, disc bearing pack, swing motor, main hydraulic pumps, and the HEUI high-pressure oil pump and injectors on whichever engine is fitted. Undercarriage components, including track pads, rollers, idlers, and sprockets, wear faster under forestry duty than on a comparable 330-series excavator in construction use, and undercarriage condition typically drives overhaul timing on this machine more than engine hours alone.
Seasonal & Environment Servicing
Clean bark, needles, and debris from the radiator, aftercooler core, and inlet screens on a tight schedule, since forestry duty fouls these faster than general excavation. Switch to arctic-grade diesel and lighter-viscosity hydraulic and drivetrain oils below freezing per the standard Cat viscosity charts. Minimize counter-rotation and cross-slope travel where the job allows to slow undercarriage wear, and keep grease intervals tight on the leveling linkage and accumulator-arm pivots, since mud, sap, and grit accelerate pivot wear versus paved or indoor duty.
TK722 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 141-1511 | Film | Fuel system service | Check fitment → |
| 188-8044 | Film | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
TK722 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-3 / 100-4 | Engine Oil Pressure Sensor Circuit, voltage above or below normal range | Open or shorted sensor wiring, failed oil pressure sensor, corroded connector | Check sensor harness and connector for damage, verify sensor supply voltage, replace sensor if wiring tests good |
| 100-1 | Engine Oil Pressure low, data valid but below normal operating range | Low oil level, worn oil pump, plugged filter, oil pressure sensor drift | Stop engine, check oil level and filter condition, verify actual pressure with a mechanical gauge before returning to service |
| 110-0 / 110-16 | Engine Coolant Temperature above normal operating threshold | Low coolant, radiator restriction or fin blockage from debris (common in forestry duty), faulty thermostat, failing water pump | Idle down and let engine cool, check coolant level and radiator/fin cleanliness, inspect thermostat and water pump before resuming full load |
| 111-1 / 111-17 | Low Coolant Level warning | Coolant leak, low coolant level sensor circuit fault, air in cooling system | Visually inspect coolant level and hoses for leaks, top off with correct coolant, check level sensor wiring if code persists with coolant full |
| 172-0 | Intake Manifold (Charge) Air Temperature above normal | Dirty or restricted air-to-air aftercooler, high ambient/inlet air temperature, sensor fault | Clean aftercooler core and inlet screens, verify airflow is unobstructed, check sensor reading against a known-good reference |
| 274-x | Atmospheric (Barometric) Pressure Sensor fault, affects boost and fuel ratio compensation | Failed barometric pressure sensor, open/shorted sensor circuit | Inspect sensor wiring and connector, replace sensor if signal is out of range at known altitude/conditions |
| 190-2 / 190-8 | Engine Speed/Timing Sensor signal erratic or lost | Damaged timing sensor, excessive sensor air gap, harness chafe from engine vibration | Inspect sensor mounting and gap, check harness routing for chafe or connector corrosion, replace sensor if signal remains erratic |
| Injection Actuation Pressure fault (HEUI system) | Injection (hydraulic) actuation oil pressure reading out of expected range | Low engine oil level affecting HEUI oil rail, worn high-pressure oil pump, faulty actuation pressure sensor, air in HEUI oil circuit | Check engine oil level and condition first, verify actuation pressure sensor wiring, have dealer-level diagnostic tool confirm actual rail pressure before component replacement |
| Turbocharger Boost Pressure low or high | Boost pressure reading outside expected range for engine load and speed | Air intake restriction, exhaust leak ahead of turbo, worn turbocharger, boost/manifold pressure sensor fault | Inspect air filter and intake ducting for restriction or leaks, check turbocharger shaft play and wastegate operation, verify sensor signal |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
TK722 attachments & work tools
Felling head - disc saw (rotating hot-saw style)
Units in the field carry a disc-saw felling head with 560 mm (22 in) maximum cut diameter and continuous 360-degree disc rotation, giving full-circle bunching without repositioning the carrier. This head type is the primary production tool for this size of track feller buncher.
Felling head - disc saw (lateral-tilt style)
An alternate factory-line disc-saw head with the same 560 mm (22 in) cut capacity is offered with a lateral tilt function (roughly 40 degrees) instead of full rotation, letting the head tip to keep the cut plumb on side slopes rather than swing the whole disc around.
Head mounting and leveling linkage
Felling heads attach at the end of a purpose-built forestry boom through a wrist/leveling linkage rather than a generic excavator-style quick coupler. A self-leveling function keeps the head level through uneven terrain and side-slope cutting; this leveling circuit is reported to be a common wear/service point that must stay in good working order.
Accumulator arms and saw hydraulic circuit
The felling head uses hydraulically actuated accumulator arms to grip and hold several cut stems before laying down a bunch, reducing tree damage versus a rigid grip. The saw drive and arm functions run on dedicated auxiliary circuits sized off the carrier's implement hydraulics; these are matched to the head at the factory rather than added as an aftermarket hydraulic kit.
Carrier engine and family commonality
Engine fitted varies by build year: early-production carriers use the Cat 3126, later-production carriers use the Cat C-9. It shares chassis design, hydraulic componentry, and general parts commonality with sibling track feller bunchers in the same numbering family; exact head and hydraulic-flow compatibility should still be confirmed per serial, since the family spans more than one power/size tier.
Cab guarding and glazing
Forestry-duty cabs of this size class use reinforced, screened, or polycarbonate glazing with an overhead falling-object guard to protect the operator from limb strikes and debris. A guarding package specific to this exact model is not separately documented online, so confirm the glazing/guard spec for a given serial with a dealer.
All TK722 assemblies by section
Every catalogued assembly group for the Caterpillar TK722. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
216-9856 Air Cleaner Gp -With Precleaner
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 18***03 | Hose-Elbow | 1 |
| 18***30 | Hose-Elbow | 1 |
210-9245 Air Cleaner Gp
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
| 17***92 | Cover As | 1 |
173-6107 Elbow Gp-Air Inlet
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 8 |
| 17***07 | Elbow Group-Air Inlet | 1 |
| 18***71 | Elbow-Air Inlet | 1 |
202-0996 Manifold Gp-Exhaust
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 19***97 | Manifold-Exhaust | 1 |
216-9857 Muffler Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 13***81 | Clamp As | 1 |
| 20***80 | Muffler As | 1 |
191-5518 Turbocharger Gp
| 19***94 | Turbocharger Group | 1 |
| 19***18 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
191-5094 Turbocharger Gp
| 13***01 | Housing-Turbine | 1 |
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 19***94 | Turbocharger Group | 1 |
Basic Engine
224-7846 Belt Tensioner Gp
| 18***49 | Support | 1 |
| 19***43 | Belt Tensioner | 1 |
| 22***46 | Belt Tensioner Group | 1 |
164-6100 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 16***00 | Camshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 20***01 | Cover Group-Cylinder Block; -Crankcase | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
133-3089 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 13***89 | Cover Group-Flywheel Housing | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
211-3285 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
164-6490 Cover Gp-Valve Mechanism
| 16***90 | Cover Group-Valve Mechanism | 1 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 24***00 | Spring | 9 |
164-6148 Crankshaft Gp
| 15***39 | Bearing-Main; (Standard) | 7 |
| 16***48 | Crankshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
325-3915 Cylinder Block As
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***05 | Bearing-Sleeve; (Camshaft) | 2 |
220-1952 Cylinder Block Gp
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
| 22***52 | Cylinder Block Group | 1 |
220-1951 Cylinder Block Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 0S***19 | Plug-Cup | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
311-7226 Cylinder Head As
| 17***88 | Seat-Valve | 12 |
| 17***90 | Seat-Valve | 12 |
| 22***90 | Sleeve-Injector | 6 |
311-7225 Cylinder Head As
| 17***88 | Seat-Valve | 12 |
| 17***90 | Seat-Valve | 12 |
| 22***90 | Sleeve-Injector | 6 |
210-5987 Cylinder Head Gp
| 16***71 | Fastener Group-Cylinder Head | 26 |
| 18***15 | Gasket Assem. | 1 |
| 21***84 | Cylinder Head Group | 1 |
210-5984 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***42 | Valve; (Intake) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
273-3034 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***42 | Valve; (Intake) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
190-0795 Damper & Pulley Gp
| 11***32 | Spacer-Special | 1 |
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
231-6686 Drive Gp-Fan
| 21***23 | Bracket As | 1 |
| 23***86 | Drive Group-Fan | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
290-6884 Fastener Gp-Cylinder Head
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
167-0171 Fastener Gp-Cylinder Head
| 16***71 | Fastener Group-Cylinder Head | 1 |
| 18***63 | Bolt; (M16x2x180-mm) | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
116-5386 Flywheel Gp
| 11***86 | Flywheel Group | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***61 | Flywheel As | 1 |
155-7918 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
187-0473 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 18***73 | Housing Group-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 19***66 | Housing-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
191-3063 Lifting Gp-Engine
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 19***63 | Lifting Group-Engine | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
216-9855 Mounting Gp-Engine
| 09***88 | Clamp; (Hose) | 1 |
| 10***37 | Washer; (24.5x135x12-mm Thk) | 2 |
| 11***30 | Support As | 2 |
219-9943 Pan Gp-Oil
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
| 19***14 | Gasket-Oil Pan; (Engine) | 1 |
188-9141 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
177-7878 Piston Gp
| 17***78 | Piston Group | 1 |
| 18***41 | Piston & Rod Group | 6 |
169-3105 Plug Gp-Engine
| 14***08 | Plug As. | 1 |
| 16***05 | Plug Group-Engine | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
213-9321 Rocker Arm Gp -Inlet
| 16***49 | Rocker Arm As | 1 |
| 21***21 | Rocker Arm Group; -Intake | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
213-9320 Rocker Arm Gp -Exhaust
| 16***47 | Rocker Arm As | 1 |
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
178-3899 Seal Gp-Crankshaft
| 17***99 | Seal Group-Crankshaft | 1 |
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
172-0961 Support Gp-Engine
| 17***61 | Support Group-Engine | 1 |
| 17***01 | Support-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
155-7927 Valve Mechanism Gp
| 15***27 | Valve Mechanism Group | 1 |
| 16***37 | Lifter As-Valve | 12 |
| 21***71 | Valve Mechanism Group | 1 |
215-9571 Valve Mechanism Gp
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 18***26 | Cooler Group-Engine Oil | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
216-9860 Cooling Ar
| 21***60 | Cooling Ar | 1 |
| 21***62 | Radiator & Mounting Group | 1 |
| 21***63 | Lines Group-Cooling; -Rad, Aftercooler, Hydraulic Cooler | 1 |
216-9864 Fan Ar-Reversible
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***85 | Elbow; (45°) | 1 |
223-7634 Fan Gp-Reversible
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 16 |
| 22***34 | Fan Group-Reversible | 1 |
216-9871 Fan Gp-Suction
| 10***56 | Plug; (Switch) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 13***40 | Spider As-Fan; (8-Blade) | 1 |
216-9863 Lines Gp-Cooling -Rad, Aftercooler, Hyd Cooler
| 12***67 | Clip Loop | 1 |
| 18***94 | Clip | 1 |
| 1P***79 | Flange (Half) | 8 |
202-2767 Lines Gp-Water
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
205-4013 Plug Gp-Water Lines
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
| 20***34 | Plug-Cup; (73.38-mm Dia) | 2 |
| 7L***56 | Plug-Cup; (67.03-mm Dia) | 2 |
202-7674 Pump Gp-Water
| 20***74 | Pump Group-Water | 1 |
| 21***52 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
219-4452 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
226-3629 Radiator & Hyd Oil Cooler Gp
| 22***29 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***82 | Sleeve-Rubber | 8 |
| 23***16 | Radiator Group | 1 |
216-9862 Radiator & Mounting Gp
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***88 | Clamp; (Hose) | 1 |
235-1016 Radiator Gp
| 14***01 | Cap-Radiator | 1 |
| 23***16 | Radiator Group | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
217-6635 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 19***41 | Angle Assem. | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
217-2433 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
262-5304 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
318-8252 Battery & Wiring Gp
| 18***64 | Terminal-Ring | 1 |
| 1L***81 | Spacer .562 In. (14.28 mm) Thick | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
165-4468 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 2 |
| 16***68 | Control & Mtg Group-Engine Elek | 1 |
| 16***11 | Spacer | 2 |
226-3760 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 12***73 | Cap-Connector | 1 |
| 19***70 | Control Group-Engine Electronic | 1 |
196-4173 Control Gp-Engine Electronic
| 19***73 | Control Group-Engine Electronic | 1 |
| 24***13 | Control Group-Engine Electronic | 1 |
240-5313 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***13 | Control Group-Engine Electronic | 1 |
| 2L***78 | Terminal-Ring; (14-Ga To 16-Ga, 5/16-In Screw) | 1 |
196-4170 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 19***70 | Control Group-Engine Electronic | 1 |
| 32***01 | Control Group-Engine Electronic | 1 |
217-2442 Electrical Ar
| 21***33 | Battery & Wiring Group | 1 |
| 21***35 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
| 21***37 | Warning Group-Backup | 1 |
262-0992 Electrical Ar
| 21***37 | Warning Group-Backup | 1 |
| 22***57 | Wiring Group-Engine | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
219-6485 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
112-9378 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
242-3517 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Screw; (M6.5x40-mm) | 4 |
| 16***56 | Bolt-Hex Head; (M8x1.25x30mm) | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
219-6487 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
222-6770 Lighting Gp-Flood -Cab Front, Side
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 13***20 | Hinge | 1 |
250-0850 Lighting Gp-Flood -Cab Front, Side
| 23***25 | Lamp Group-Flood; -Suspended Mount | 3 |
| 25***50 | Lighting Group-Flood; -Cab Front, Side | 1 |
| 25***13 | Cover | 1 |
261-1091 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 09***50 | Nut-Wing | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 5 |
217-2435 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 09***50 | Nut-Wing | 1 |
| 21***35 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
117-3915 Motor Gp-Electric -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
306-9319 Mounting Gp-Wiring
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 13***00 | Clip; (Tab) | 3 |
| 30***19 | Mounting Group-Wiring | 1 |
222-9161 Panel Gp-Circuit Breaker
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 13***00 | Clip; (Tab) | 2 |
252-5803 Panel Gp-Fuse
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 6 |
| 20***81 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 22***14 | Panel Group-Fuse | 1 |
222-5414 Panel Gp-Fuse
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 12***98 | Latch Assem. | 1 |
| 12***76 | Cam-Latch | 1 |
238-5022 Panel Gp-Relay
| 13***00 | Clip; (Tab) | 7 |
| 13***89 | Clip; (Ladder) | 1 |
| 17***00 | Suppressor-Arc | 1 |
216-9870 Preheater Gp-Machine -Hydraulic Tank, Engine
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 12***77 | Hose; (190cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
224-9686 Preheater Gp-Machine -Diesel Fired
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 13***73 | Hose-Fuel; (14 cm) | 0 |
| 13***08 | Clamp | 2 |
165-4469 Sensor Gp-Engine -Electronic Control
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 16***69 | Sensor Group-Engine; -Electronic Control | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
197-8391 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
204-0320 Sensor Gp-Temperature -Engine Oil
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 20***20 | Sensor Group-Temperature; -Engine Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
191-6587 Sensor Gp-Temperature -Engine Oil
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
118-7284 Starting Aid Gp -Air Inlet Heater
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
6v-0590 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
223-6377 Starting Motor Gp-Electric
| 10***41 | Starting Motor Group-Electric | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
104-7041 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***41 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
254-3783 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
223-4453 Switch Gp-Magnetic -Starting Aid Heater Relay
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 22***53 | Switch Group-Magnetic; -Starting Aid Heater-Starting Aid Heater Relay | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
179-0006 Switch Gp-Magnetic
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
165-5970 Switch Gp-Toggle -Hyd Tank Fill Pump, Motor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
158-6634 Switch Gp-Toggle
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
217-2437 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
212-8018 Wiring Gp-Boom -Floodlights
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
253-2606 Wiring Gp-Boom -Floodlights
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
222-5415 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***45 | Clip | 1 |
| 11***61 | Housing | 1 |
280-0558 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 12 |
238-5006 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Housing | 1 |
238-8267 Wiring Gp-Console
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
222-5416 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
280-0561 Wiring Gp-Console
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
204-3604 Wiring Gp-Electronic Control
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
222-9157 Wiring Gp-Engine
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
255-6927 Wiring Gp-Hyd Tank Fill Pump
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
217-2438 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
262-6798 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
Engine Arrangement
216-4800 Engine Ar
| 11***86 | Flywheel Group | 1 |
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
216-4803 Engine Ar-Core
| 15***18 | Gear Group-Front | 1 |
| 15***27 | Valve Mechanism Group | 1 |
| 16***00 | Camshaft Group | 1 |
213-2400 Installation Ar-Engine
| 21***00 | Installation Ar-Engine | 1 |
| 21***55 | Mounting Group-Engine | 1 |
| 21***56 | Air Cleaner Group; -With Precleaner | 1 |
Frame And Body
316-6440 Box Gp-Battery
| 31***10 | Box As-Battery, Exhaust Valve, Exhaust Valve; Serviced As 38***91. | 1 |
| 31***25 | Plate | 2 |
| 31***31 | Plate | 1 |
333-0597 Brace Gp
| 33***97 | Brace Group | 1 |
| 33***02 | Actuator, Etr Fuel Control, Electronic Fuel Control Actuator, Brace As | 1 |
| 33***20 | Plate | 1 |
212-8004 Counterweight Gp
| 21***04 | Counterweight Group | 1 |
| 21***60 | Plate As | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 8 |
272-0054 Counterweight Gp
| 13***21 | Washer; (13.5x25.5x3-mm Thk) | 6 |
| 14***06 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
212-8001 Frame As-Upper
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 10 |
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 21***01 | Frame As-Upper | 1 |
261-1088 Frame As-Upper
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 10 |
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 26***88 | Frame As-Upper | 1 |
261-1087 Frame Gp-Upper
| 08***87 | Grommet | 5 |
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
212-8000 Frame Gp-Upper
| 08***87 | Grommet | 4 |
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
227-6087 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
199-4476 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
224-9122 Gear & Bearing Gp-Swing
| 09***95 | Plug | 1 |
| 1U***46 | Sealant (For Locations A) | 1 |
| 22***22 | Gear & Bearing Group-Swing | 1 |
227-6088 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***73 | Seal-Dust | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
199-4478 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
199-4475 Gear & Bearing Gp-Swing
| 19***75 | Gear & Bearing Group-Swing | 1 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
261-1089 Guard Gp-Lighting
| 19***78 | Hinge | 1 |
| 1K***50 | Spring | 1 |
| 25***80 | Guard As | 1 |
247-7641 Guard Gp-Radiator
| 12***36 | Handle | 2 |
| 24***41 | Guard Group-Radiator | 1 |
| 26***82 | Latch As; (Heavy-Duty) | 1 |
216-9865 Guard Gp-Radiator
| 12***36 | Handle | 2 |
| 1K***50 | Spring | 1 |
| 20***38 | Rod As | 1 |
212-8002 Hood Gp
| 15***11 | Lockwasher | 3 |
| 15***59 | Eyebolt; (M8x1.25x100-mm) | 2 |
| 17***20 | Hinge | 3 |
212-8019 Plate Gp-Frame
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 2 |
| 21***19 | Plate Group-Frame | 1 |
| 7T***99 | Link | 6 |
280-1999 Step As
| 28***99 | Step As | 1 |
235-6512 Step Gp
| 17***94 | Pin As | 2 |
| 23***25 | Step As | 1 |
| 23***12 | Step Group | 1 |
217-9693 Tilt Gp-Hood
| 12***18 | Sleeve | 1 |
| 14***25 | Connector As. | 4 |
| 17***07 | Clip | 2 |
Fuel System
224-5005 Filter Gp-Fuel -Secondary
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 16***77 | Plug As | 3 |
| 17***99 | Base As-Fuel Filter | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
217-2570 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
236-0962 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
216-9868 Lines Gp-Fuel
| 06***51 | Clamp | 6 |
| 09***86 | Clamp; (Hose) | 3 |
| 14***19 | Connector As | 1 |
191-3517 Pump & Mtg Gp-Unit Inj Hyd
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 18***21 | Pump Group-Fuel Prm & Prim Filter; -With Water Separator-Primary | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep -Primary Fuel Filter
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
172-5780 Pump Gp-Unit Injection
| 17***80 | Pump Group-Unit Injection | 1 |
| 19***20 | Bolt-Socket Head; (M8x1.25x63-mm) | 2 |
| 21***70 | Injector Group-Fuel | 1 |
166-1759 Pump Gp-Unit Injection
| 16***59 | Pump Group-Unit Injection | 1 |
| 17***80 | Pump Group-Unit Injection | 6 |
222-0490 Regulator Gp-Fuel Pressure
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 18***92 | Strap-Grounding | 1 |
| 22***90 | Regulator Group-Fuel Pressure | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
269-0681 Tank Gp-Fuel -Auxiliary
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
Hydraulic System
3g-7232 Bypass Gp-Filter -Hydraulic Oil
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3G***73 | Spring; (Inner) | 1 |
| 3G***32 | Bypass Group-Filter; -Hydraulic Oil | 1 |
171-2446 Cover Gp-Valve End
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 2D***98 | Seal-O-Ring; (44.12mm Id) | 1 |
224-9037 Cylinder & Lines Gp-Tilt -Cab Leveling
| 14***35 | Hose As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 10 |
282-3014 Cylinder & Mtg Gp-Boom
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
282-3152 Cylinder & Mtg Gp-Saw
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
282-3013 Cylinder & Mtg Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
282-3109 Cylinder & Mtg Gp-Stick & Saw -Harvester Head, Lh
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***09 | Cylinder & Mtg Group-Stick & Saw; -Harvester Head, Lh | 1 |
| 28***52 | Cylinder & Mtg Group-Saw | 1 |
217-9702 Cylinder Ar-Hydraulic -Boom, Stick
| 14***27 | Connector Group | 4 |
| 14***76 | Elbow As | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 4 |
217-9701 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 14***27 | Connector Group | 6 |
| 14***76 | Elbow As | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 6 |
248-6874 Cylinder Ar-Hydraulic -Boom, Stick
| 24***74 | Cylinder Ar-Hydraulic; -Boom, Stick | 1 |
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***14 | Cylinder & Mtg Group-Boom | 1 |
212-8040 Cylinder Gp-Hood Tilt
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 21***40 | Cylinder Group-Hood Tilt | 1 |
251-8281 Cylinder Gp-Hood Tilt
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 23***74 | Pin | 2 |
215-9097 Cylinder Gp-Hydraulic -Boom
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
215-9092 Cylinder Gp-Stick -Boom
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
226-4970 Cylinder Gp-Stick
| 22***70 | Cylinder Group-Stick | 1 |
| 23***97 | Cylinder As | 1 |
| 23***98 | Rod As | 1 |
274-7480 Cylinder Gp-Tilt -Saw
| 09***71 | Ring; (Retaining) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
282-9611 Cylinder Gp-Tilt -Rear, For Cab Leveling
| 06***61 | Ring-Retaining | 4 |
| 15***37 | Bearing | 2 |
| 16***09 | Seal As-Buffer | 1 |
222-9150 Cylinder Gp-Tilt -Rear, For Cab Leveling
| 06***61 | Ring-Retaining | 4 |
| 15***37 | Bearing | 2 |
| 16***09 | Seal As-Buffer | 1 |
254-5457 Cylinder Gp-Tilt -Saw
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
222-9149 Cylinder Gp-Tilt -Side, For Cab Leveling
| 09***43 | Seal-Lip Type | 2 |
| 09***12 | Bearing-Sleeve | 1 |
| 16***09 | Seal As-Buffer | 1 |
215-9052 Cylinder Gp-Tilt -Saw
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
217-9689 Drive Ar-Swing
| 09***55 | Pin | 1 |
| 11***29 | Bolt; (M24x3x100-mm) | 16 |
| 16***73 | Valve Group-Shutoff | 1 |
201-7808 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
220-8623 Drive Gp-Swing
| 20***13 | Motor & Mtg Group-Swing | 1 |
| 22***20 | Drive Group-Swing | 1 |
| 22***23 | Drive Group-Swing | 1 |
199-4490 Drive Gp-Swing
| 19***93 | Drive Group-Swing; -Without Motor | 1 |
| 19***90 | Drive Group-Swing | 1 |
220-8620 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
191-2693 Drive Gp-Swing -Without Motor
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***50 | Coupling-Pipe | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
222-7092 Filter Gp-Oil -Hydraulic
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 4 |
| 1R***92 | Filter Element As-Oil; (Advanced Efficiency) | 3 |
| 22***92 | Filter Group-Oil; -Hydraulic | 1 |
126-2075 Filter Gp-Oil -Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
094-3245 Gauge Gp-Sight -Hydraulic Oil Level
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
192-2892 Head Gp-Motor -Travel
| 08***59 | Plug As | 1 |
| 09***32 | Bolt-Socket Head; (M12x1.75x95-mm) | 2 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
270-4694 Head Gp-Pump -Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 2 |
198-3809 Head Gp-Pump -Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 1 |
282-3068 Hydraulic Ar-Harvester -Without Linkage
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
218-1919 Hydraulic Ar-Tilt
| 21***89 | Drive Ar-Swing | 1 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
| 21***91 | Lines Group-Pump | 1 |
245-1969 Kit-Seal -Feed Reducer Plug
| 21***30 | Kit-Seal; (Control Valve) | 1 |
| 24***69 | Kit-Seal; -Feed Reducer Plug | 1 |
197-9885 Lever Gp-Control -Hydraulic Lockout
| 16***80 | Lever Group-Control; -Hydraulic Lockout | 1 |
| 17***08 | Cover | 1 |
| 19***85 | Lever Group-Control; -Hydraulic Lockout | 1 |
167-7080 Lever Gp-Control -Hydraulic Lockout
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
217-9706 Lines Gp-Boom
| 11***60 | Union | 1 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 4 |
217-9705 Lines Gp-Boom -Felling Head
| 14***55 | Union As | 22 |
| 15***26 | Union Assembly | 2 |
| 20***29 | Tag-Identification; (Saw Oil Drain) | 2 |
253-2603 Lines Gp-Boom -Harvester Head
| 11***60 | Union | 1 |
| 14***55 | Union As | 8 |
| 15***26 | Union Assembly | 4 |
306-9318 Lines Gp-Control -Crossover, Travel
| 12***40 | Connector | 1 |
| 16***27 | Connector As | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 4 |
282-3065 Lines Gp-Front -Boom, Harvester Head
| 14***27 | Connector Group | 3 |
| 14***31 | Tee Group | 1 |
| 15***36 | Reducer As | 1 |
217-9708 Lines Gp-Front
| 12***33 | Elbow | 1 |
| 16***48 | Coupling Group | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 9 |
217-9707 Lines Gp-Front -Boom, Felling Head
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
282-3101 Lines Gp-Front -Boom, Stick
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
282-3102 Lines Gp-Front -Boom, Felling Head
| 25***95 | Hose As | 10 |
| 25***96 | Hose As | 1 |
| 28***02 | Lines Group-Front; -Boom, Felling Head | 1 |
282-3064 Lines Gp-Front -Boom Cylinder, Harvester Head
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 14***34 | Connector Group | 1 |
253-2604 Lines Gp-Front -Boom, Harvester Head
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 14***27 | Connector Group | 3 |
282-3108 Lines Gp-Motor
| 14***55 | Union As | 8 |
| 20***27 | Tag-Identification; (Saw Oil Supply) | 8 |
| 20***28 | Tag-Identification; (Saw Oil Return) | 8 |
217-9694 Lines Gp-Pilot
| 11***65 | Bracket | 1 |
| 11***11 | Tee-O-Ring Port | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 2 |
306-9315 Lines Gp-Pilot
| 11***45 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
306-9316 Lines Gp-Pilot
| 11***45 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
217-9691 Lines Gp-Pump
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 2 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
282-3071 Lines Gp-Pump
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
217-9692 Lines Gp-Return
| 11***34 | Tee-O-Ring | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 2 |
| 14***28 | Connector Assem. | 1 |
253-2607 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
217-9709 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
256-0350 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
217-9703 Lines Gp-Stick
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 5 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
217-9704 Lines Gp-Stick
| 11***60 | Union | 1 |
| 14***39 | Connector As. | 1 |
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 3 |
253-2602 Lines Gp-Stick
| 11***60 | Union | 1 |
| 14***55 | Union As | 6 |
| 15***26 | Union Assembly | 3 |
224-9038 Lines Gp-Travel Motor
| 11***31 | Hose As | 2 |
| 14***28 | Connector Assem. | 1 |
| 14***35 | Connect Group; (Each Includes) | 4 |
206-1513 Motor & Mtg Gp-Swing
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
179-9775 Motor Gp-Swing
| 17***75 | Motor Group-Swing | 1 |
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
188-4175 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
236-1237 Motor Gp-Travel
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
206-6508 Plug Gp-Hydraulic Lines
| 20***08 | Plug Group-Hydraulic Lines | 1 |
| 6V***30 | Cap As -Lines From Rotate Valve Work | 5 |
| 6V***32 | Cap As | 4 |
217-9690 Pump & Lines Gp-Hyd Tank Fill
| 00***70 | Nipple-Strainer To Flange | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
205-5266 Pump & Motor Gp -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 20***05 | Seal Kit; (Includes Seal And Rings) | 0 |
212-8039 Pump & Motor Gp-Hood Tilt
| 10***96 | Screen-Filter | 1 |
| 10***97 | Tube | 1 |
| 10***98 | Tube | 1 |
222-3097 Pump & Mtg Gp-Main Hydraulic -Harvester Head
| 15***58 | Flange | 1 |
| 15***59 | Hub | 1 |
| 15***43 | Coupling & Mtg Group-Pump | 1 |
217-9700 Pump & Mtg Gp-Main Hydraulic -Felling Head
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 26***29 | Pump Group-Piston; -Main Hydraulic, Felling Head | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 7 |
283-2529 Pump & Mtg Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
217-9699 Pump Gp-Piston -Main Hydraulic, Harvester Head
| 08***01 | Plug As | 3 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***92 | Seal | 1 |
268-6729 Pump Gp-Piston -Main Hydraulic, Felling Head
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
218-2977 Pump Gp-Piston -Saw
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
268-8259 Pump Gp-Piston
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
191-0883 Rotating Gp-Motor -Travel
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***29 | Plate-Control | 1 |
| 12***30 | Pin-Center | 1 |
190-8121 Rotating Gp-Motor -Travel
| 19***21 | Rotating Group-Motor; -Travel | 1 |
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
216-0028 Rotating Gp-Pump
| 14***60 | Ring; (Seal) | 2 |
| 17***02 | Pin | 1 |
| 17***03 | Piston As | 7 |
216-0034 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
283-5978 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
283-5979 Rotating Gp-Pump
| 17***02 | Pin | 1 |
| 17***10 | Spring | 4 |
| 17***11 | Plate | 1 |
216-0035 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
283-5977 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
191-0886 Shaft Gp-Hydraulic Motor
| 09***29 | Ring; (Retaining) | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 19***55 | Kit-Bearing | 1 |
224-9040 Swivel Gp -With Tilt Function
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 2 |
| 14***63 | Seal As | 10 |
212-8005 Tank Gp-Hydraulic & Fuel
| 09***96 | Bolt; (M20x2.5-Thd) | 4 |
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
214-7687 Tank Gp-Hydraulic & Fuel
| 21***87 | Tank Group-Hydraulic & Fuel | 1 |
306-9323 Tube Gp-Diffuser -Hydraulic Tank
| 27***59 | Tube As | 1 |
| 30***23 | Tube Group-Diffuser; -Hydraulic Tank | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
217-9695 Valve & Lines Gp-Travel Cont -With Tilt Function
| 09***43 | Retainer | 1 |
| 14***09 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
256-0349 Valve & Mtg Gp-Main Control -7-Bank
| 11***60 | Union | 1 |
| 12***37 | Clip-Loop | 2 |
| 12***23 | Bracket Assem. | 1 |
217-9697 Valve & Mtg Gp-Main Control -7-Bank
| 14***15 | Hose As | 1 |
| 14***09 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
217-9698 Valve & Mtg Gp-Main Control -5-Bank, Harvester Head
| 11***45 | Hose As | 1 |
| 11***17 | Clip | 1 |
| 14***15 | Hose As | 1 |
192-3284 Valve Gp-Counterbalance -Travel Motor
| 12***96 | Pin | 2 |
| 12***98 | Seat | 2 |
| 12***99 | Seat | 2 |
194-6973 Valve Gp-Brake -Pressure Release
| 09***56 | Setscrew-Socket | 1 |
| 10***04 | Seal-O-Ring | 1 |
| 16***67 | Dowel | 1 |
192-3293 Valve Gp-Check & Relief -Travel Motor
| 19***93 | Valve Group-Check & Relief; -Travel Motor | 1 |
| 19***94 | Poppet | 1 |
| 19***08 | Spring | 1 |
227-2141 Valve Gp-Control -End Cover
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
256-0520 Valve Gp-Control -Head Tilt-Hf, Blank-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
234-0586 Valve Gp-Control -Inlet
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 23***86 | Valve Group-Control; -Inlet | 1 |
227-2133 Valve Gp-Control -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
234-0587 Valve Gp-Control -Boom
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
227-2131 Valve Gp-Control -Travel
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***46 | Kit-Valve | 1 |
244-7364 Valve Gp-Control -Lateral Tilt-Hf, Rotator-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
229-6681 Valve Gp-Control -Forward, Side Leveling
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2134 Valve Gp-Control -Felling Head Tilt
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
227-2137 Valve Gp-Control -Felling Head Lateral Tilt
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
248-5414 Valve Gp-Control -End Cover
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 24***14 | Valve Group-Control; -End Cover | 1 |
247-7010 Valve Gp-Control -Saw Motor Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
247-9847 Valve Gp-Control -Inlet
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 24***47 | Valve Group-Control; -Inlet | 1 |
227-2136 Valve Gp-Control -Stick
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2135 Valve Gp-Control -Swing
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
244-7363 Valve Gp-Control
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
242-4240 Valve Gp-Control -Intermittent Saw, 2-Bank
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
227-2139 Valve Gp-Control -Rotator
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***37 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2138 Valve Gp-Control -Extension
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***41 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2140 Valve Gp-Control -Travel
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
218-8377 Valve Gp-Control -Travel, 4-Bank, With Tilt Function
| 21***77 | Valve Group-Control; -Travel, 4-Bank, With Tilt Function | 1 |
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***40 | Valve Group-Control; -Travel | 2 |
227-2132 Valve Gp-Control -Inlet
| 17***00 | Valve Group-Flow Control; (Pilot Supply)(Inlet) | 1 |
| 17***01 | Adapter As-Valve | 1 |
| 17***53 | Fitting-37 Degree | 1 |
105-8117 Valve Gp-Counterbalance -Hood Tilt Cylinder
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
218-8378 Valve Gp-Main Control -Harvester Head, 5-Bank
| 21***78 | Valve Group-Main Control; -Harvester Head, 5-Bank | 1 |
| 22***32 | Valve Group-Control; -Inlet | 21 |
| 22***35 | Valve Group-Control; -Swing | 1 |
218-8379 Valve Gp-Main Control -7-Bank
| 21***79 | Valve Group-Main Control; -7-Bank | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***34 | Valve Group-Control; -Felling Head Tilt | 1 |
256-0500 Valve Gp-Main Control -7-Bank
| 22***32 | Valve Group-Control; -Inlet | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***35 | Valve Group-Control; -Swing | 1 |
218-1811 Valve Gp-Manifold & Reducing -Pilot Oil
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 3 |
| 21***11 | Valve Group-Manifold & Reducing; -Pilot Oil | 1 |
| 3E***05 | Valve Group-Solenoid; -Variable Fan Speed | 1 |
198-3811 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 12***94 | Plug; (Break Off) | 5 |
| 12***17 | Plug | 1 |
| 15***85 | Dowel | 2 |
198-3810 Valve Gp-Pump Control -Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***80 | Spring | 2 |
270-3521 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***81 | Seat | 2 |
184-3830 Valve Gp-Relief -Swing Motor
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
167-1555 Valve Gp-Selector & Press Cont -Boom
| 10***66 | Adapter | 2 |
| 16***55 | Valve Group-Selector & Press Cont; -Pilot Oil Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
276-9072 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
3e-9205 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
116-3526 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
171-3685 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 16***71 | Kit-Seal; (Solenoid Valve) | 1 |
195-3739 Valve Gp-Solenoid -Pump Control
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
152-8340 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
222-5781 Valve Gp-Solenoid & Manifold -Disc Saw
| 17***85 | Valve Group-Solenoid | 1 |
| 22***81 | Valve Group-Solenoid & Manifold; -Disc Saw | 1 |
| 22***64 | Cartridge As-Valve | 2 |
222-5811 Valve Gp-Solenoid & Manifold -Load Sensing
| 03***21 | Ring-Back-Up | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 16***54 | Seal-O-Ring | 1 |
196-5862 Valve Gp-Solenoid & Manifold -Pump Torque Limiter Control
| 12***27 | Manifold | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 19***62 | Valve Group-Solenoid & Manifold; -Pilot Lines-Proportional Reducing | 1 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
Implements
212-8011 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
226-5001 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
218-1918 Lines Gp-Grease -Boom
| 21***18 | Lines Group-Grease; -Boom | 1 |
| 24***33 | Hose As | 1 |
| 24***34 | Hose As | 1 |
253-2605 Lines Gp-Grease -Boom, Stick
| 24***35 | Hose As | 1 |
| 24***36 | Hose As | 1 |
| 25***05 | Lines Group-Grease; -Boom, Stick | 1 |
218-1917 Lines Gp-Grease -Boom, Stick
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 14***85 | Clip | 1 |
| 21***17 | Lines Group-Grease; -Boom, Stick | 1 |
212-8010 Linkage Ar-Felling Head
| 21***10 | Linkage Ar-Felling Head | 1 |
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
282-3069 Linkage Ar-Felling Head
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
252-8713 Linkage Ar-Harvester Head
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
218-2974 Linkage Ar-Harvester Head
| 21***11 | Boom Group | 1 |
| 21***16 | Stick Group; -Harvester Head | 1 |
| 21***98 | Valve & Mtg Group-Main Control; -5-Bank, Harvester Head | 1 |
282-3012 Linkage Ar-Harvester Head
| 22***01 | Boom Group | 1 |
| 22***02 | Stick Group; -Harvester Head | 1 |
| 25***02 | Lines Group-Stick | 1 |
246-6201 Linkage Ar-Harvester Head
| 15***73 | Plug As | 3 |
| 16***81 | Plug As | 8 |
| 21***98 | Valve & Mtg Group-Main Control; -5-Bank, Harvester Head | 1 |
252-8717 Linkage Ar-Intermittent Saw
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
212-8014 Linkage Gp-Felling Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
212-7999 Stick As
| 1D***83 | Bolt-Carriage; (3/8-16x1-In) | 2 |
| 21***99 | Stick As | 1 |
| 21***08 | Stick As | 1 |
212-8012 Stick Gp -Felling Head
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***15 | Shim (2.0 mm Thick) | 4 |
| 09***34 | Shim; (T=69.85mm) | 2 |
226-5002 Stick Gp -Harvester Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
212-8016 Stick Gp -Harvester Head
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
| 21***98 | Plate As | 1 |
| 21***99 | Stick As | 1 |
Lubrication System
226-3560 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 22***60 | Filler Group-Engine Oil | 1 |
| 22***65 | Tube As | 1 |
220-1998 Filter Gp-Engine Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 14***64 | Stud; (M8x1.25x35-mm) | 1 |
226-3559 Fumes Disposal Gp
| 22***18 | Bracket | 1 |
| 22***34 | Hose-Fumes Disposal | 1 |
| 22***59 | Fumes Disposal Group | 1 |
219-9960 Gauge Gp-Oil Level (Dipstick) -Engine
| 18***16 | Tube As-Guide; (Rh) | 1 |
| 21***59 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 21***60 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
202-6603 Lines Gp-Engine Oil
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***03 | Lines Group-Engine Oil | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 16***65 | Lines Group-Turbocharger Oil | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
195-8098 Pump Gp-Engine Oil
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
| 33***05 | Pump As-Engine Oil | 1 |
Machine Arrangement
213-2398 Chassis Ar
| 21***00 | Frame Group-Upper | 1 |
| 21***02 | Hood Group | 1 |
| 21***03 | Guard Group-Cab | 1 |
261-1086 Chassis Ar
| 21***02 | Hood Group | 1 |
| 21***04 | Counterweight Group | 1 |
| 21***05 | Tank Group-Hydraulic & Fuel | 1 |
319-6600 Cold Weather Ar
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 31***52 | Battery & Wiring Group | 1 |
213-2396 Common Ar
| 21***96 | Common Ar | 1 |
| 21***98 | Chassis Ar | 1 |
| 21***00 | Installation Ar-Engine | 1 |
262-1000 Common Ar
| 21***00 | Installation Ar-Engine | 1 |
| 21***04 | Plate & Film Group | 1 |
| 21***00 | Engine Ar | 1 |
242-5335 Conversion Ar-Machine -Without Front Linkage
| 15***73 | Plug As | 1 |
| 16***81 | Plug As | 14 |
| 21***92 | Cylinder Group-Stick; -Boom | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 24***86 | Plate | 2 |
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
178-5524 Adjustment Gp-Console
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 09***15 | Ring-Retaining | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 1 |
197-4107 Air Conditioner & Mounting Gp
| 18***54 | Filter Element-Cab Air | 1 |
| 19***07 | Air Conditioner & Mounting Group | 1 |
| 19***60 | Air Conditioner Group | 1 |
243-6303 Air Conditioner & Mounting Gp
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 24***03 | Air Conditioner & Mounting Group | 1 |
| 24***04 | Air Conditioner Group | 1 |
243-6304 Air Conditioner Gp
| 17***63 | Duct As | 1 |
| 19***05 | Gasket | 1 |
| 24***04 | Air Conditioner Group | 1 |
250-0398 Air Conditioner Gp
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
238-1027 Air Conditioner Gp
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
| 23***27 | Air Conditioner Group | 1 |
199-3160 Air Conditioner Gp
| 17***62 | Duct | 1 |
| 17***63 | Duct As | 1 |
| 18***09 | Duct | 1 |
234-6607 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***07 | Armrest Group; -Lh | 1 |
234-6606 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***06 | Armrest Group; -Rh | 1 |
213-2401 Cab Ar-Enclosed Rops
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 19***13 | Duct Group-Cab Air | 1 |
217-2440 Cab Gp-Enclosed Rops
| 19***19 | Window Group-Cab | 1 |
| 19***20 | Door Group-Cab | 1 |
| 21***40 | Door Group-Access; -Cab Roof | 1 |
222-5420 Cab Gp-Enclosed Rops
| 19***20 | Door Group-Cab | 1 |
| 19***56 | Window Group-Cab | 1 |
| 21***40 | Door Group-Access; -Cab Roof | 1 |
238-5013 Cab Gp-Enclosed Rops
| 23***60 | Plate | 1 |
| 23***08 | Window Group-Cab; -Side | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
238-5010 Cab Gp-Enclosed Rops
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
| 23***12 | Door Group-Cab | 1 |
199-3159 Case Gp-Air Conditioner
| 18***19 | Screw-Hex Flange; (M5x2.24x14-mm) | 6 |
| 18***56 | Switch As-Pressure; (Air Conditioner, Low Side) | 1 |
| 18***57 | Switch As-Pressure; (High Discharge Cut Off) | 1 |
246-7154 Case Gp-Air Conditioner
| 10***74 | Seal-Connector | 10 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
177-6729 Case Gp-Heater & Evaporator
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
199-3157 Case Gp-Heater & Evaporator
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
226-3561 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
243-5686 Console Gp-Operator
| 18***84 | Cover | 1 |
| 24***86 | Console Group-Operator | 1 |
| 24***23 | Console Group-Operator; -Lh | 1 |
204-6974 Console Gp-Operator -Rh
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 5 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 6 |
| 15***99 | Nut | 10 |
245-7923 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
245-7924 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
161-3759 Console Gp-Operator -Lh
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 8 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 15***99 | Nut | 8 |
223-0052 Console Gp-Operator
| 15***75 | Ladder Clip | 2 |
| 16***59 | Console Group-Operator; -Lh | 1 |
| 17***08 | Cushion As-Arm | 1 |
224-4990 Control & Mtg Gp-Joystick -Felling Head
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
223-0671 Control & Mtg Gp-Joystick -Harvester Head
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
238-8167 Control & Mtg Gp-Pedal
| 23***13 | Control Group-Hydraulic Pedal | 1 |
| 23***67 | Control & Mtg Group-Pedal | 1 |
| 23***22 | Plate As | 1 |
235-4122 Control Gp-Handle -Felling Head
| 17***08 | Switch As-Limit | 8 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 26***01 | Film-Overlay; (6-Button, 11.5-mm) | 1 |
223-0715 Control Gp-Handle -Harvester Head, Lh
| 10***51 | Loom; (39 cm) | 0 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***08 | Switch As-Limit | 10 |
223-0716 Control Gp-Handle -Harvester Head, Rh
| 10***51 | Loom; (39 cm) | 0 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***08 | Switch As-Limit | 10 |
231-2613 Control Gp-Hydraulic Pedal
| 11***49 | Pedal Assem.; (L.H.) | 1 |
| 11***50 | Pedal Assem.; (R.H.) | 1 |
| 11***56 | Step Assem. | 2 |
272-7088 Control Gp-Joystick -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***88 | Control Group-Joystick; -Harvester Head, Lh | 1 |
272-7089 Control Gp-Joystick -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***89 | Control Group-Joystick; -Harvester Head, Rh | 1 |
283-2394 Control Gp-Joystick -Harvester Head, Lh
| 18***54 | Terminal | 12 |
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
283-2393 Control Gp-Joystick -Felling Head
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 28***93 | Control Group-Joystick; -Felling Head | 1 |
272-7087 Control Gp-Joystick -Felling Head
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 27***87 | Control Group-Joystick; -Felling Head | 1 |
283-2395 Control Gp-Joystick -Harvester Head, Rh
| 18***54 | Terminal | 12 |
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
272-0446 Control Gp-Monitor -Iqan
| 13***92 | Retainer-Captive | 2 |
| 17***33 | Lamp; (Red) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 2 |
241-4146 Control Gp-Monitor -Iqan
| 17***33 | Lamp; (Red) | 1 |
| 18***71 | Cover | 1 |
| 19***06 | Screw-Truss Head; (M5x0.8x16-mm) | 4 |
256-7304 Door Gp-Access -Cab Roof
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***29 | Block | 2 |
256-1296 Door Gp-Access -Cab Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***81 | Door As-Access; (Cab Roof) | 1 |
| 25***82 | Window | 1 |
212-4540 Door Gp-Access -Cab Roof
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***40 | Door Group-Access; -Cab Roof | 1 |
237-2374 Door Gp-Access -Air Filter
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 20***05 | Latch As | 1 |
| 23***74 | Door Group-Access; -Air Filter | 1 |
238-5012 Door Gp-Cab
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***06 | Fastener | 15 |
197-4720 Door Gp-Cab
| 03***72 | Pin-Clevis | 2 |
| 09***55 | Clip | 2 |
| 09***87 | Channel-Trim | 0 |
254-9336 Door Gp-Cab
| 09***55 | Clip | 2 |
| 10***61 | Guard | 1 |
| 10***44 | Latch As-Rotary | 1 |
239-1378 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 16***74 | Louver As-Vent | 10 |
197-2913 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***17 | Louver As | 1 |
| 11***94 | Hose; (66-cm) | 0 |
199-5134 Duct Gp-Cab Air
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 19***21 | Duct | 1 |
258-0699 Frame Gp-Window -Thick Glass
| 25***48 | Window; (Center) | 1 |
| 25***50 | Window; (Left) | 1 |
| 25***66 | Angle As | 1 |
250-0861 Frame Gp-Window
| 24***20 | Plate | 2 |
| 24***34 | Angle As | 1 |
| 24***36 | Angle As | 1 |
212-8003 Guard Gp-Cab
| 19***78 | Hinge | 1 |
| 1K***50 | Spring | 1 |
| 21***03 | Guard Group-Cab | 1 |
197-9880 Guard Gp-Window
| 19***80 | Guard Group-Window | 1 |
| 19***90 | Angle | 1 |
| 19***91 | Guard As | 1 |
213-0235 Handle Gp-Door -Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 21***35 | Handle Group-Door; -Cab | 1 |
| 6V***92 | Screw-Machine; (M4x0.7x25-mm) | 1 |
253-9594 Hatch Gp-Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***04 | Window-Roof; (Cab) | 1 |
| 25***09 | Bar | 1 |
202-9627 Housing Gp-Air Conditioner -Outlet Air
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
251-6761 Housing Gp-Air Conditioner -Outlet Air
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
199-3156 Housing Gp-Air Conditioner -Inlet Air
| 17***90 | Plate | 1 |
| 17***99 | Gasket | 1 |
| 17***05 | Case; (Bottom) | 1 |
238-5024 Installation Gp-Radio
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
220-8420 Installation Gp-Radio
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
302-7455 Liner Gp-Cab
| 26***61 | Foam | 1 |
| 26***62 | Foam | 1 |
| 26***63 | Foam | 1 |
263-2766 Liner Gp-Cab
| 25***25 | Foam | 1 |
| 26***60 | Foam | 1 |
| 26***61 | Foam | 1 |
261-1090 Lines Gp-Air Conditioner
| 06***51 | Clamp | 1 |
| 12***98 | Bracket Assem. | 1 |
| 14***11 | Adapter Group | 1 |
216-9869 Lines Gp-Air Conditioner
| 06***51 | Clamp | 1 |
| 12***98 | Bracket Assem. | 1 |
| 14***11 | Adapter Group | 1 |
212-8007 Mounting Gp-Cab
| 13***62 | Mount | 8 |
| 13***63 | Sleeve; (36-mm) | 4 |
| 19***40 | Washer As | 3 |
251-6137 Mounting Gp-Cab
| 11***31 | Mount Assem. | 8 |
| 24***98 | Sleeve | 8 |
| 24***39 | Washer; (32x135x12-mm Thk) | 6 |
238-5004 Operator Ar
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
| 23***27 | Air Conditioner Group | 1 |
222-5418 Panel Gp-Instrument
| 09***24 | Plug-Button | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 2 |
222-5412 Platform Gp-Operator
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 19***53 | Tread | 1 |
238-5020 Platform Gp-Operator
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 13***13 | Bolt; (M10x1.5x16-mm) | 2 |
| 23***20 | Platform Group-Operator | 1 |
224-7213 Radio Gp -Am/Fm Cassette, Cd Changer
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***25 | Radio Group; (Am/Fm Cassette, Cd Changer)(Deluxe W/ Remote Capabilities) | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 19***54 | Sleeve | 1 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
331-5292 Radio Gp -Am, Fm
| 19***54 | Sleeve | 1 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
285-2371 Radio Gp -Am/Fm Cassette, Cd Changer
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***26 | Radio Group; (Am/Fm Cd Player) | 1 |
200-5731 Radio Gp -Am/Fm/Wb
| 13***90 | Bushing; (Radio Mount) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
201-4436 Seat Belt Gp -Retractable
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
229-9090 Seat Gp -High Back, Tilt
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
161-3781 Seat Gp
| 16***81 | Seat Group | 1 |
| 16***03 | Suspension Group-Seat | 1 |
| 16***06 | Seat Group | 1 |
242-3122 Seat & Mounting Gp -High Back, Tilt
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 24***22 | Seat Group; -High Back, Tilt | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
188-0886 Seat Gp-Suspension
| 16***81 | Seat Group | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
161-3757 Support Gp-Seat
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
| 16***43 | Support As; (Seat) | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
| 23***57 | Support As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
164-0503 Suspension Gp-Seat
| 16***03 | Suspension Group-Seat | 1 |
| 17***54 | Cover Group-Seat; (Suspension) | 1 |
| 17***55 | Kit-Seat Adjuster; (Upper) | 1 |
245-7892 Suspension Gp-Seat
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
229-9077 Suspension Gp-Seat
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 24***68 | Cover As | 1 |
238-5025 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 20***61 | Hose As | 1 |
| 22***64 | Handle As | 1 |
299-5611 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 22***64 | Handle As | 1 |
| 23***73 | Cover-Front; (Upper, Rh) | 1 |
222-5417 Trim Gp-Cab
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***39 | Support-Filter | 1 |
| 13***45 | Stop-Rubber | 4 |
197-9956 Window Gp-Cab
| 19***40 | Window Group-Cab; -Front | 1 |
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***21 | Window-Rh | 1 |
266-3093 Window Gp-Cab -Front
| 24***34 | Plate | 2 |
| 24***35 | Plate | 1 |
| 25***42 | Angle As | 1 |
195-0440 Window Gp-Cab -Front
| 14***04 | Screw-Button Head; (M8x1.25x35-mm) | 4 |
| 16***16 | Spacer; (10x16x20-mm Thk) | 4 |
| 19***40 | Window Group-Cab; -Front | 1 |
197-2919 Window Gp-Cab
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***19 | Window Group-Cab | 1 |
| 19***21 | Window-Rh | 1 |
238-5008 Window Gp-Cab -Side
| 23***07 | Window; (Rear) | 1 |
| 23***49 | Window; (Right Side, Front) | 1 |
| 23***53 | Window; (Rear Quarter, Left Side) | 2 |
196-2392 Window Gp-Cab -Lh
| 13***30 | Hinge-Lh | 2 |
| 15***15 | Gasket | 1 |
| 19***87 | Frame As-Lower | 1 |
197-9865 Window Gp-Front
| 19***60 | Window-Front | 1 |
| 19***63 | Plate | 1 |
| 19***65 | Window Group-Front | 1 |
Power Train
236-6675 Drive Gp-Final
| 09***29 | Ring; (Retaining) | 5 |
| 09***44 | Ring-Retaining | 5 |
| 13***41 | Washer | 1 |
222-8855 Final Drive Gp
| 22***55 | Final Drive Group | 1 |
| 23***37 | Motor Group-Travel | 1 |
| 23***75 | Drive Group-Final | 1 |
185-0672 Sprocket Gp
| 18***72 | Sprocket Group | 1 |
| 20***58 | Sprocket-Track | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
Service Equipment And Supplies
212-8006 Box Gp-Tool
| 1U***84 | Holder As; (Grease Gun) | 1 |
| 21***06 | Box Group-Tool | 1 |
| 22***47 | Plate | 1 |
233-8140 Film Gp
| 17***03 | Film-Identification; (300-Ft) | 2 |
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***42 | Film-Warning; (Trip Point) | 1 |
279-3454 Film-Instruction -Joystick Control, Pattern 4
| 27***54 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
279-3456 Film-Instruction -Joystick Control, Pattern 6
| 27***56 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5490 Film-Instruction -Joystick Control, Pattern 5
| 26***90 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
279-3457 Film-Instruction -Joystick Control, Pattern 7
| 27***57 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
269-5775 Film-Instruction -Joystick Control, Pattern 2
| 26***75 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
279-3452 Film-Instruction -Joystick Control, Pattern 2
| 27***52 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
269-5488 Film-Instruction -Joystick Control, Pattern 3
| 26***88 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
269-5489 Film-Instruction -Joystick Control, Pattern 4
| 26***89 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
269-5491 Film-Instruction -Joystick Control, Pattern 6
| 26***91 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
279-3453 Film-Instruction -Joystick Control, Pattern 3
| 27***53 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
269-5492 Film-Instruction -Joystick Control, Pattern 7
| 26***92 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3455 Film-Instruction -Joystick Control, Pattern 5
| 27***55 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
259-1068 Film-Instruction -Joystick Control, Pattern 1
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
228-9470 Plate & Film Gp -English
| 17***03 | Film-Identification; (300-Ft) | 2 |
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***42 | Film-Warning; (Trip Point) | 1 |
213-2404 Plate & Film Gp
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
| 13***59 | Plate-Identification; (Engine Stop, Run) | 1 |
Undercarriage
220-1388 Fastener Gp-Carbody
| 22***88 | Fastener Group-Carbody | 1 |
| 22***89 | Spacer; (31.75x60x76.2-mm Thk) | 20 |
| 22***90 | Spacer | 4 |
224-9376 Frame Gp-Track Roller
| 22***76 | Frame Group-Track Roller | 1 |
| 22***65 | Frame As; (Rh) | 1 |
| 22***66 | Frame As; (Lh) | 1 |
185-0673 Guard Gp-Track Guide
| 12***34 | Bolt; (M24x3x340-mm) | 16 |
| 15***55 | Spacer | 16 |
| 18***73 | Guard Group-Track Guide | 1 |
225-5993 Idler Gp-Front
| 20***69 | Idler Group-Front | 1 |
| 22***93 | Idler Group-Front | 1 |
| 22***94 | Spring Group-Recoil | 1 |
207-0469 Idler Gp-Front
| 10***85 | Seal Group-Duo-Cone | 2 |
| 11***51 | Shaft-Idler | 1 |
| 11***97 | Bearing | 2 |
225-5984 Idler Gp-Front
| 10***09 | Track Adjuster Group | 2 |
| 22***84 | Idler Group-Front | 1 |
| 22***93 | Idler Group-Front | 2 |
208-6245 Link As-Track -Grease Lubricated Track
| 15***71 | Ring; (Thrust) | 96 |
| 19***25 | Pin; (Track) | 48 |
| 20***45 | Link As-Track; -Grease Lubricated Track | 1 |
269-7858 Link As-Track -Grease Lubricated Track
| 15***71 | Ring; (Thrust) | 96 |
| 19***25 | Pin; (Track) | 48 |
| 20***44 | Seal As | 96 |
198-1001 Link As-Track -Grease Lubricated Track
| 15***71 | Ring; (Thrust) | 98 |
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 19***25 | Pin; (Track) | 49 |
224-9064 Roller Ar-Track
| 20***63 | Roller Group-Track-Double Flange | 16 |
| 20***64 | Roller Group-Track-Single Flange | 6 |
| 22***64 | Roller Ar-Track | 1 |
336-7736 Roller Ar-Track -Star
| 25***95 | Roller Group-Track-Single Flange | 4 |
| 33***36 | Roller Ar-Track; -Star | 1 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 16 |
228-6415 Roller Ar-Track & Carrier
| 20***63 | Roller Group-Track-Double Flange | 16 |
| 20***64 | Roller Group-Track-Single Flange | 2 |
| 22***04 | Roller Group-Track-Single Flange | 4 |
206-1263 Roller Gp-Track-Double Flange
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 20***62 | Roller & Bearing As | 1 |
254-4095 Roller Gp-Track-Single Flange
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 25***95 | Roller Group-Track-Single Flange | 1 |
206-1264 Roller Gp-Track-Single Flange
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 20***64 | Roller Group-Track-Single Flange | 1 |
228-6404 Roller Gp-Track-Single Flange
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 22***04 | Roller Group-Track-Single Flange | 1 |
225-5994 Spring Gp-Recoil
| 10***76 | Support As | 1 |
| 10***81 | Support | 1 |
| 10***82 | Rod | 1 |
219-1357 Tilt Gp-Cab Leveling
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
| 12***78 | Washer; (25.5x85x12-mm Thk) | 4 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 1 |
102-8109 Adjustment Gp-Hydraulic Track
| 09***36 | Seal-Lip Type | 1 |
| 09***12 | Ring, Back-Up | 2 |
| 09***19 | Seal-O-Ring (Id=59.60mm) | 2 |
207-5896 Track Gp -2-Required
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***96 | Track Group; -2-Required | 1 |
269-7861 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***83 | Shoe-Track | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
209-8658 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***45 | Link As-Track; -Grease Lubricated Track | 1 |
| 20***35 | Shoe; (Track) | 48 |
207-5282 Track Gp -2-Required
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***82 | Track Group; -2-Required | 1 |
269-7859 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***97 | Shoe-Track | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
219-4806 Undercarriage Ar
| 20***58 | Track Group; -2-Required | 2 |
| 21***83 | Undercarriage Ar; -Tilting | 1 |
| 21***06 | Undercarriage Ar | 1 |
219-4800 Undercarriage Ar
| 21***00 | Undercarriage Ar | 1 |
| 26***59 | Track Group; -2-Required | 2 |
222-6816 Undercarriage Ar
| 20***58 | Track Group; -2-Required | 2 |
| 22***02 | Undercarriage Ar; -Tilting | 1 |
| 22***16 | Undercarriage Ar | 1 |
222-6814 Undercarriage Ar
| 20***96 | Track Group; -2-Required | 2 |
| 22***02 | Undercarriage Ar; -Tilting | 1 |
| 22***14 | Undercarriage Ar | 1 |
219-4804 Undercarriage Ar
| 20***96 | Track Group; -2-Required | 2 |
| 21***83 | Undercarriage Ar; -Tilting | 1 |
| 21***04 | Undercarriage Ar | 1 |
222-6815 Undercarriage Ar
| 20***82 | Track Group; -2-Required | 2 |
| 22***02 | Undercarriage Ar; -Tilting | 1 |
| 22***15 | Undercarriage Ar | 1 |
224-9063 Undercarriage Ar
| 18***72 | Sprocket Group | 2 |
| 18***73 | Guard Group-Track Guide | 1 |
| 20***91 | Cover | 2 |
224-9042 Undercarriage Ar
| 18***72 | Sprocket Group | 2 |
| 18***73 | Guard Group-Track Guide | 1 |
| 20***91 | Cover | 2 |
219-4801 Undercarriage Ar
| 21***01 | Undercarriage Ar | 1 |
| 26***61 | Track Group; -2-Required | 2 |
219-4805 Undercarriage Ar
| 20***82 | Track Group; -2-Required | 2 |
| 21***83 | Undercarriage Ar; -Tilting | 1 |
| 21***05 | Undercarriage Ar | 1 |
222-6802 Undercarriage Ar -Tilting
| 21***57 | Tilt Group-Cab Leveling | 1 |
| 22***88 | Fastener Group-Carbody | 1 |
| 22***02 | Undercarriage Ar; -Tilting | 1 |
219-4783 Undercarriage Ar -Tilting
| 21***57 | Tilt Group-Cab Leveling | 1 |
| 21***83 | Undercarriage Ar; -Tilting | 1 |
| 22***88 | Fastener Group-Carbody | 1 |
Frequently asked questions
What engine does the Caterpillar TK722 have?
It depends on build year. Early-production TK722 units use the Cat 3126, a 7.2 L (441 cu in) inline-six diesel. Later-production units use the Cat C-9, an 8.8 L (536 cu in) inline-six diesel. No single horsepower rating is documented for this exact configuration, so confirm the engine actually fitted from the data plate or serial range before ordering parts.
What is the operating weight of the Caterpillar TK722?
Approximately 30,410 kg (67,040 lb) as configured with cab and a standard felling head. Actual weight varies with the disc-saw or shear head fitted to the machine.
What replaced the Caterpillar TK722?
No confirmed direct successor model is documented for the TK722 specifically. Cat's current feller buncher lines, including the 511, 521, 522, 541, and 552 series, serve the same class of forestry work today, but no documented lineage connects them directly to the TK722.
What TK722 owners discuss
What is the most common source of engine trouble on TK722 units, and does it differ between the 3126-powered and C-9-powered machines?
On both engine series the HEUI fuel system is the main wear item. Symptoms are rough idle, hard cold start, and power loss under saw load. On 3126-equipped early-production units, HEUI pump wear that contaminates injectors is the pattern most reported. On C-9-equipped later units, individual injector plugging and hardened injector sealing cups show up more as hours climb. Keep fuel and oil clean and stay on the filter schedule; both series hold up well past mid-life hours when fuel system maintenance is current. Have your dealer verify injection system diagnosis before replacing parts.
Owners report weak swing power on the felling head. What usually causes it?
Weak swing torque is most often traced to low hydraulic oil level or a worn main pump rather than a swing motor fault. Check tank level and filter condition first. Persistent weak swing after fluid and filter service points to pump wear or internal leakage in the swing motor. Have your dealer verify pump output flow and pressure before condemning the swing drive.
What undercarriage wear pattern should I expect on a machine like this run in forestry duty?
Forestry-duty tracked machines wear undercarriage faster than a construction-duty unit on the same chassis, driven by tearing over stumps and roots, working across slope, and repeated counter-rotation to reposition on the stem. Expect accelerated wear on track pads, rollers, idlers, and sprockets versus a standard excavator on the same 330-series platform. Minimizing counter-rotation and slope travel extends component life but does not eliminate the wear pattern.
Is the felling head self-leveling wrist linkage a known trouble spot?
Yes. The leveling linkage that keeps the disc-saw head oriented on the boom is a recognized service point on this class of forestry machine. Bushings and pins at the wrist pivot wear from constant leveling motion under load, and the leveling cylinder and its hoses see continuous cycling. Leaks or play at this linkage show up as sloppy head control before a pin or cylinder actually fails. Have your dealer verify wrist linkage and cylinder condition, since a failure here affects safe head control during felling.
What electrical issues show up on these forestry machines?
Intermittent fault codes are usually a harness or connector problem rather than a sensor or ECM failure, especially on machines that see brush and branch contact around the cab and boom. Chafed harness insulation, corroded connectors, and wiring pinched by routine limb contact cause codes that clear on restart and reappear during operation. A basic wiggle test on suspect harness runs finds most of these before a sensor gets condemned. Have your dealer verify wiring and connector integrity before replacing an electronic component.
What should I inspect before buying a used TK722?
Confirm which engine is fitted, 3126 or C-9, since parts support and service procedures differ between the two. Check hydraulic oil condition and look for leaks at the main pumps, swing motor, and felling-head leveling cylinder. Inspect undercarriage wear on pads, rollers, idlers, and sprockets, since forestry duty accelerates this wear compared to general excavation use. Check the disc-saw head for tooth condition and play in the bearing pack, and check the leveling wrist for looseness. Weigh hour meter history against undercarriage and engine condition; low hours with heavy undercarriage wear points to hard duty rather than light use.
Do the saw teeth need special handling?
Yes. Damaged or missing saw teeth should be replaced in matched pairs directly opposite each other on the disc to keep the assembly balanced. Running the head with only one tooth replaced or missing invites vibration that accelerates bearing wear in the head. Keep lubrication ports on the head clean and greased per the maintenance schedule to protect the bearing pack.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific TK722 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.