Caterpillarforest productstrack feller buncher
Caterpillar TK721
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar TK721 is a track-mounted feller buncher built for firm-to-moderate ground forestry harvesting, part of the TK711/TK721/TK722/TK732/TK741/TK751/TK752 family that shares a common Cat C9 (C-9) 8.8-liter six-cylinder turbo diesel with HEUI fuel injection and ADEM3 electronic control. Operating weight for the TK721 runs around 27,080 kg (59,710 lb), based on the limited factory data available for this model. Production dates to the mid-2000s, with documented units built in 2004 and 2007; the line traces back to the TimberKing forestry brand, a joint Caterpillar-and-Blount product sold through Cat dealers before Caterpillar folded it fully into its own lineup. The TK721 is offered as a track undercarriage carrier fitted with a continuous-rotation disc-saw felling head, the standard configuration for this size class of Cat forestry equipment.
Across the TK7-series, the core C9 HEUI/ADEM3 powertrain and hydraulic swing-drive architecture stayed consistent; what changed model to model was size class, operating weight, and undercarriage/counterweight sizing, from the smaller TK711 up through the TK751/TK752. Caterpillar brought the TimberKing brand in-house in 2006 and then acquired Blount's Forestry Division assets outright in late 2007, after which the TK-series was succeeded by the Cat 5-series track feller bunchers. That transition period is why parts sourcing for a TK721 today splits between legacy TimberKing-labeled components and later Cat-branded equivalents, and why no dedicated factory spec sheet is easy to find. In the used and parts market, the TK721 still matters because its C9 platform and undercarriage wear components are shared with other Cat forestry machines of the era, keeping parts support alive well after factory documentation thinned out.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar TK721 specifications
Engine
| Engine model | Cat C9 (C-9), shared across the TK711/TK721/TK722/TK732/TK741/TK751/TK752 track feller buncher line |
| Configuration | 6-cylinder inline diesel, turbocharged |
| Displacement | 8.8 L |
| Power (C9 family rating range, not confirmed as the exact TK721 factory rating) | approx. 153 to 206 kW (205 to 275 hp) at 1800 to 2200 rpm — varies by rating; one individual used TK721 unit was listed at 243 hp (181 kW), not confirmed as a catalog spec |
| Emissions tier | Not documented for this model — verify by serial/build year with your dealer |
Weights
| Operating weight (standard configuration) | 27,080 kg (59,710 lb) |
| Shipping weight | Not documented — verify with your dealer or a transport specialist |
| Ground pressure | Not published |
Dimensions
| Operating (transport) length | 7.01 m (23 ft 0 in) |
| Operating width | 3.18 m (10 ft 5 in) |
| Operating height | 3.45 m (11 ft 4 in) |
| Track gauge / wheelbase | Not documented in public sources |
| Ground clearance | Not documented in public sources |
| Note | Width and height can vary with track shoe width and felling head selection |
Performance
| Travel speed | Not documented in public sources |
| Gradeability | Not published |
| Felling head | 360-degree rotating disc/shear felling head per used-equipment listings; head type and cutting capacity vary by attachment fitted |
Service capacities (summary)
| Fuel tank | Not documented in public sources |
| Hydraulic system | Not documented in public sources |
| Engine oil | Not documented in public sources |
| Cooling system | Not documented in public sources |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
TK721 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C-9 diesel | Not published for the TK721 in accessible sources. Bare C-9 industrial/machine engine crankcase (with filter) commonly runs in the 23 to 26 L (6.1 to 6.9 US gal) range on other C-9-powered Cat machines, but the TK721's own OMM refill-capacities table was not retrievable - verify against the machine's OMM or SIS by serial number. | Cat DEO or DEO-ULS diesel engine oil. Cat multigrade guidance for C-9 machines: SAE 15W-40 for ambient temperatures above roughly -18 C (0 F), 10W-30 down to about -24 C (-11 F), and full-synthetic 0W-40/5W-40 for colder climates. Confirm exact viscosity-by-temperature chart in the machine OMM. |
| Cooling system | Not published for the TK721 in accessible sources - verify against the machine's OMM or SIS by serial number. | Cat ELC (Extended Life Coolant) premixed or concentrate, or Cat DEAC where ELC is not used. Follow the OMM's coolant/water ratio and extended-life service interval guidance. |
| Fuel tank | Not published for the TK721 in accessible sources - other C-9-powered Cat track feller bunchers in this family are commonly fitted with fuel tanks in the 300 to 400+ L (80 to 100+ US gal) class, but no figure specific to the TK721 could be confirmed. Verify against the machine's OMM or SIS by serial number. | Ultra-low-sulfur diesel fuel meeting Cat engine fuel specifications. |
| Hydraulic system and tank | Not published for the TK721 in accessible sources - verify against the machine's OMM or SIS by serial number. | Cat HYDO Advanced or Cat TDTO, per the OMM's hydraulic fluid recommendation for this machine class. Viscosity grade should follow the OMM's ambient-temperature selection chart. |
| Final drives (each, left and right) | Not published for the TK721 in accessible sources - verify against the machine's OMM or SIS by serial number. | Cat TDTO (Transmission and Drive Train Oil) or Cat FD (Final Drive) oil per OMM viscosity-by-temperature chart. |
| Swing/rotate drive (upper structure) | Not published for the TK721 in accessible sources - verify against the machine's OMM or SIS by serial number. | Cat TDTO per OMM viscosity-by-temperature guidance, where this machine configuration includes a separate swing-drive reservoir. |
| Grease (chassis, felling head/attachment pivots) | Not applicable - grease points serviced individually per the lubrication schedule, no reservoir capacity. | Cat Ultra 5 Moly or Cat Advanced 3-Moly Grease (NLGI 2), or equivalent EP moly grease per OMM lubrication chart. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar TK721 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the TK721 beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull Cat S·O·S samples from the C9 crankcase, hydraulic tank, and both final drives at every scheduled oil change, and trend results before stretching intervals past factory defaults. Download ADEM3 fault-code history at each service stop; HEUI injector and rail-pressure codes surface early wear before power loss is felt. Watch hydraulic fluid cleanliness closely, since the felling head's constant swing and clamp cycling loads the pump and valves harder than most Cat forestry undercarriage machines in this class.
Corrective & Common Repairs
Expect swing-bearing and seal wear first: the continuous-rotation disc-saw head loads that bearing with repeated shock on every cut cycle. Track rollers, idlers, and final-drive seals wear faster than on excavator-based carriers because ground contact is harder on forestry duty cycles. Check hydraulic hoses near the boom and felling-head pivots for chafing and replace before failure. HEUI injector and ADEM3 harness connectors corrode in wet logging conditions, so clean and dielectric-grease contacts at every service interval.
Overhaul & Rebuild Points
Plan the swing-drive gearbox and bearing as the first major overhaul point on a TK721; it absorbs the highest cyclic load on the machine. Final drives and track components typically need rebuild or replacement well before the C9 engine itself. HEUI injectors, the turbocharger, and valve train are the usual mid-life engine rebuild items; use S·O·S trend data to time this rather than guessing by hours. Inspect the disc-saw gearbox and main bearing for wear at the same overhaul interval.
Seasonal & Environment Servicing
Cold-climate operation calls for a block heater and winter-grade fuel to keep the HEUI system from gelling on TK721 units working northern logging seasons; check coolant freeze protection before first frost. Clear mud, snow, and debris from tracks, rollers, and the swing bearing housing daily in wet season, since packed debris accelerates seal wear. Switch to a lighter hydraulic oil viscosity for cold starts if your dealer's chart calls for it, and clean radiator and hydraulic cooler cores often in summer, since forestry duty loads them with sawdust and debris.
TK721 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 141-1511 | Film | Fuel system service | Check fitment → |
| 188-8044 | Film | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
TK721 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 036-CID 0100-FMI 03 | Engine oil pressure sensor circuit voltage above normal | Open circuit or short to a power source on the oil pressure sensor signal wire | Inspect sensor connector and harness for damage or corrosion before replacing the sensor |
| MID 036-CID 0100-FMI 04 | Engine oil pressure sensor circuit voltage below normal, or low oil pressure warning | Short to ground on the sensor circuit, failed sensor, or genuinely low oil pressure | Shut down and verify actual oil pressure with a mechanical gauge before continuing operation |
| MID 036-CID 0110-FMI 00 | Engine coolant temperature above normal operating range (overheat) | Low coolant level, blocked radiator core, fan drive fault, or water pump failure | Stop engine, check coolant level and cooling system for blockage or leaks before restart |
| MID 036-CID 0110-FMI 03 | Coolant temperature sensor circuit voltage above normal | Open circuit or short to power at the sensor connector or wiring | Inspect sensor wiring and connector, test sensor resistance against spec |
| MID 036-CID 0190-FMI 02 | Engine speed/timing sensor signal erratic or intermittent | Loose or damaged speed/timing sensor, debris on timing wheel, or chafed wiring | Inspect sensor air gap, mounting, and wiring harness for damage |
| MID 036-CID 0168-FMI 02 | Electrical system (battery) voltage signal erratic or intermittent | Loose or corroded battery terminal, failing alternator, or poor chassis ground | Check battery connections and charging system output before replacing components |
| MID 036-CID 0102-FMI 03 | Boost/intake manifold pressure sensor circuit voltage above normal | Open circuit or short to power in the boost sensor wiring | Inspect sensor connector and harness, replace sensor if wiring tests good |
| MID 036-CID 0001-FMI 05 | Cylinder injector solenoid circuit current below normal (open circuit) | Open winding in the injector solenoid or a broken wire in the injector harness | Check injector wiring harness continuity and connector condition before replacing the injector |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
TK721 attachments & work tools
Felling head - disc saw
This size class of track feller buncher runs a continuous-rotation disc saw as its primary cutting head, offering higher cutting speed than a shear in mixed timber. Exact disc diameter and tooth count for the TK721 are not documented in available sources - confirm with a dealer for the specific serial range.
Felling head - shear
A guillotine-style shear head was offered as an alternative to the disc saw on this weight class, favored for pulpwood and abrasive or rocky ground where saw teeth wear quickly. Stem-capacity figures specific to the TK721 are not documented and vary by configuration.
Accumulator arms
Hydraulic accumulator arms hold multiple cut stems against the felling head so the operator can gather a bunch before laying it down, standard equipment on this class of feller buncher. Arm count and reach depend on which head is fitted.
Head mounting and rotation
The felling head mounts to the boom tip through a dedicated pin and bearing joint rather than an excavator-style quick coupler. A continuous 360-degree rotation bearing lets the head stay level and turn independent of the carrier's upper swing, matching the rotating-cutter arrangement documented for this machine.
Felling boom / arm
The TK721 carries a purpose-built forestry felling boom rather than a two-piece excavator boom-and-stick, positioning the head for cutting and laying stems; boom geometry sets the standard operating length and reach for the machine.
Hydraulic arrangement
Saw motor drive and accumulator-arm cylinders run off the machine's factory-integrated forestry hydraulic circuit rather than a bolt-on auxiliary kit, with pump and valve sizing matched to the felling head at build rather than added in the field.
Cab guarding
A forestry-spec cab package with heavy-duty screen guarding and thick polycarbonate (Margard-type) front glazing meeting FOPS/OPS-rated protection is standard for this size and class of track feller buncher, shielding the operator from flying debris and falling limbs.
Undercarriage and machine guarding
Belly pans, final-drive guards, and other underside shielding are common on feller bunchers working over stumps and rock; a specific factory guarding option list for the TK721 is not documented in available sources - verify current offerings with a dealer.
All TK721 assemblies by section
Every catalogued assembly group for the Caterpillar TK721. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
210-9245 Air Cleaner Gp
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
| 17***92 | Cover As | 1 |
216-9856 Air Cleaner Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 18***03 | Hose-Elbow | 1 |
| 18***30 | Hose-Elbow | 1 |
173-6107 Elbow Gp-Air Inlet
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 8 |
| 17***07 | Elbow Group-Air Inlet | 1 |
| 18***71 | Elbow-Air Inlet | 1 |
8n-2694 Indicator Gp-Air Filter Change
| 8N***94 | Indicator-Air Filter Change; (Air Cleaner) | 1 |
202-0996 Manifold Gp-Exhaust
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 19***97 | Manifold-Exhaust | 1 |
216-9857 Muffler Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 13***81 | Clamp As | 1 |
| 20***80 | Muffler As | 1 |
191-5518 Turbocharger Gp
| 19***94 | Turbocharger Group | 1 |
| 19***18 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
191-5094 Turbocharger Gp
| 13***01 | Housing-Turbine | 1 |
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 19***94 | Turbocharger Group | 1 |
Basic Engine
224-7846 Belt Tensioner Gp
| 18***49 | Support | 1 |
| 19***43 | Belt Tensioner | 1 |
| 22***46 | Belt Tensioner Group | 1 |
164-6100 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 16***00 | Camshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 20***01 | Cover Group-Cylinder Block; -Crankcase | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
133-3089 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 13***89 | Cover Group-Flywheel Housing | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
211-3285 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
164-6490 Cover Gp-Valve Mechanism
| 16***90 | Cover Group-Valve Mechanism | 1 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 24***00 | Spring | 9 |
164-6148 Crankshaft Gp
| 15***39 | Bearing-Main; (Standard) | 7 |
| 16***48 | Crankshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
325-3915 Cylinder Block As
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***05 | Bearing-Sleeve; (Camshaft) | 2 |
220-1951 Cylinder Block Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 0S***19 | Plug-Cup | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
220-1952 Cylinder Block Gp
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
| 22***52 | Cylinder Block Group | 1 |
311-7225 Cylinder Head As
| 17***88 | Seat-Valve | 12 |
| 17***90 | Seat-Valve | 12 |
| 22***90 | Sleeve-Injector | 6 |
311-7226 Cylinder Head As
| 17***88 | Seat-Valve | 12 |
| 17***90 | Seat-Valve | 12 |
| 22***90 | Sleeve-Injector | 6 |
273-3034 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***42 | Valve; (Intake) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
210-5987 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 21***87 | Cylinder Head Group | 1 |
| 27***34 | Cylinder Head Group | 1 |
210-5984 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***42 | Valve; (Intake) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
190-0795 Damper & Pulley Gp
| 11***32 | Spacer-Special | 1 |
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
231-6686 Drive Gp-Fan
| 21***23 | Bracket As | 1 |
| 23***86 | Drive Group-Fan | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
167-0171 Fastener Gp-Cylinder Head
| 16***71 | Fastener Group-Cylinder Head | 1 |
| 18***63 | Bolt; (M16x2x180-mm) | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
290-6884 Fastener Gp-Cylinder Head
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
116-5386 Flywheel Gp
| 11***86 | Flywheel Group | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***61 | Flywheel As | 1 |
155-7918 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
187-0473 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 18***73 | Housing Group-Flywheel | 1 |
| 18***87 | Housing-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
191-3063 Lifting Gp-Engine
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 19***63 | Lifting Group-Engine | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
216-9855 Mounting Gp-Engine
| 09***88 | Clamp; (Hose) | 1 |
| 10***37 | Washer; (24.5x135x12-mm Thk) | 2 |
| 11***30 | Support As | 2 |
219-9943 Pan Gp-Oil
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
| 19***14 | Gasket-Oil Pan; (Engine) | 1 |
188-9141 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
177-7878 Piston Gp
| 17***78 | Piston Group | 1 |
| 18***41 | Piston & Rod Group | 6 |
169-3105 Plug Gp-Engine
| 14***08 | Plug As. | 1 |
| 16***05 | Plug Group-Engine | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
213-9320 Rocker Arm Gp -Exhaust
| 16***47 | Rocker Arm As | 1 |
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
213-9321 Rocker Arm Gp -Inlet
| 16***49 | Rocker Arm As | 1 |
| 21***21 | Rocker Arm Group; -Intake | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
178-3899 Seal Gp-Crankshaft
| 17***99 | Seal Group-Crankshaft | 1 |
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
172-0961 Support Gp-Engine
| 17***61 | Support Group-Engine | 1 |
| 17***01 | Support-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
155-7927 Valve Mechanism Gp
| 15***27 | Valve Mechanism Group | 1 |
| 16***37 | Lifter As-Valve | 12 |
| 21***71 | Valve Mechanism Group | 1 |
215-9571 Valve Mechanism Gp
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 18***26 | Cooler Group-Engine Oil | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
216-9860 Cooling Ar
| 21***60 | Cooling Ar | 1 |
| 21***62 | Radiator & Mounting Group | 1 |
| 21***63 | Lines Group-Cooling; -Rad, Aftercooler, Hydraulic Cooler | 1 |
216-9864 Fan Ar-Reversible
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***85 | Elbow; (45°) | 1 |
223-7634 Fan Gp-Reversible
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 16 |
| 22***34 | Fan Group-Reversible | 1 |
216-9871 Fan Gp-Suction
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 13***40 | Spider As-Fan; (8-Blade) | 1 |
| 19***55 | Belt-Serpentine; (Fan Drive) | 1 |
216-9863 Lines Gp-Cooling -Rad, Aftercooler, Hyd Cooler
| 12***67 | Clip Loop | 1 |
| 18***94 | Clip | 1 |
| 1P***79 | Flange (Half) | 8 |
202-2767 Lines Gp-Water
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
205-4013 Plug Gp-Water Lines
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
| 20***34 | Plug-Cup; (73.38-mm Dia) | 2 |
| 7L***56 | Plug-Cup; (67.03-mm Dia) | 2 |
219-4452 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
202-7674 Pump Gp-Water
| 20***74 | Pump Group-Water | 1 |
| 21***52 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
226-3629 Radiator & Hyd Oil Cooler Gp
| 22***29 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***82 | Sleeve-Rubber | 8 |
| 23***16 | Radiator Group | 1 |
216-9862 Radiator & Mounting Gp
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***88 | Clamp; (Hose) | 1 |
235-1016 Radiator Gp
| 14***01 | Cap-Radiator | 1 |
| 23***16 | Radiator Group | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Caterpillar Monitoring System-Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
217-6635 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 19***41 | Angle Assem. | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
262-5304 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
318-8252 Battery & Wiring Gp
| 18***64 | Terminal-Ring | 1 |
| 1L***81 | Spacer .562 In. (14.28 mm) Thick | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
217-2433 Battery & Wiring Gp
| 11***21 | Battery Group | 2 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***93 | Cover | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
226-3760 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 12***73 | Cap-Connector | 1 |
| 19***70 | Control Group-Engine Electronic | 1 |
165-4468 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 2 |
| 16***68 | Control & Mtg Group-Engine Elek | 1 |
| 16***11 | Spacer | 2 |
196-4173 Control Gp-Engine Electronic
| 19***73 | Control Group-Engine Electronic | 1 |
| 24***13 | Control Group-Engine Electronic | 1 |
196-4170 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 19***70 | Control Group-Engine Electronic | 1 |
| 32***01 | Control Group-Engine Electronic | 1 |
240-5313 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***13 | Control Group-Engine Electronic | 1 |
| 2L***78 | Terminal-Ring; (14-Ga To 16-Ga, 5/16-In Screw) | 1 |
262-0992 Electrical Ar
| 21***37 | Warning Group-Backup | 1 |
| 22***57 | Wiring Group-Engine | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
217-2442 Electrical Ar
| 21***33 | Battery & Wiring Group | 1 |
| 21***35 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
| 21***37 | Warning Group-Backup | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
242-3517 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Screw; (M6.5x40-mm) | 4 |
| 16***56 | Bolt-Hex Head; (M8x1.25x30mm) | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
219-6487 Lamp Gp-Flood -24-Volt, 65-Watt
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
219-6485 Lamp Gp-Flood -Under Hood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
112-9378 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
222-6770 Lighting Gp-Flood -Cab Front, Side
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***20 | Hinge | 1 |
| 19***12 | Cover | 1 |
217-2435 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 09***50 | Nut-Wing | 1 |
| 21***35 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
261-1091 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 09***50 | Nut-Wing | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 5 |
250-0850 Lighting Gp-Flood -Cab Front, Side
| 23***25 | Lamp Group-Flood; -Suspended Mount | 3 |
| 25***50 | Lighting Group-Flood; -Cab Front, Side | 1 |
| 25***13 | Cover | 1 |
117-3915 Motor Gp-Electric -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
306-9319 Mounting Gp-Wiring
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 13***00 | Clip; (Tab) | 3 |
| 30***19 | Mounting Group-Wiring | 1 |
222-9161 Panel Gp-Circuit Breaker
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 13***00 | Clip; (Tab) | 2 |
222-5414 Panel Gp-Fuse
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 12***98 | Latch Assem. | 1 |
| 12***76 | Cam-Latch | 1 |
252-5803 Panel Gp-Fuse
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 6 |
| 20***81 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 22***14 | Panel Group-Fuse | 1 |
238-5022 Panel Gp-Relay
| 13***00 | Clip; (Tab) | 7 |
| 13***89 | Clip; (Ladder) | 1 |
| 17***00 | Suppressor-Arc | 1 |
224-9686 Preheater Gp-Machine -Diesel Fired
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 13***73 | Hose-Fuel; (14 cm) | 0 |
| 13***08 | Clamp | 2 |
216-9870 Preheater Gp-Machine -Hydraulic Tank, Engine
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 12***77 | Hose; (190cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
165-4469 Sensor Gp-Engine -Electronic Control
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 16***69 | Sensor Group-Engine; -Electronic Control | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6221 Sensor Gp-Speed
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
197-8391 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
197-8392 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
191-6587 Sensor Gp-Temperature -Engine Oil
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
204-0320 Sensor Gp-Temperature -Engine Oil
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 20***20 | Sensor Group-Temperature; -Engine Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
118-7284 Starting Aid Gp -Air Inlet Heater
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
223-6377 Starting Motor Gp-Electric
| 10***41 | Starting Motor Group-Electric | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
104-7041 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***41 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
6v-0590 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
179-0006 Switch Gp-Magnetic
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
223-4453 Switch Gp-Magnetic -Starting Aid Heater Relay
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 22***53 | Switch Group-Magnetic; -Starting Aid Heater-Starting Aid Heater Relay | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
241-8368 Switch Gp-Magnetic -Main Power Relay-Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
167-0138 Switch Gp-Magnetic -24-Volt-Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
254-3783 Switch Gp-Magnetic -24-Volt-Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
165-5970 Switch Gp-Toggle -Hyd Tank Fill Pump, Motor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
158-6634 Switch Gp-Toggle
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
217-2437 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
253-2606 Wiring Gp-Boom -Floodlights
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 25***06 | Wiring Group-Boom; -Floodlights | 1 |
| 25***09 | Harness As-Lighting; (Boom) | 1 |
212-8018 Wiring Gp-Boom -Floodlights
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
222-5415 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***45 | Clip | 1 |
| 11***61 | Housing | 1 |
238-5006 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Housing | 1 |
280-0558 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 12 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
238-8267 Wiring Gp-Console
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
222-5416 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
280-0561 Wiring Gp-Console
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
204-3604 Wiring Gp-Electronic Control
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
222-9157 Wiring Gp-Engine
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
255-6927 Wiring Gp-Hyd Tank Fill Pump
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
217-2438 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
262-6798 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
Engine Arrangement
216-4800 Engine Ar
| 11***86 | Flywheel Group | 1 |
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
216-4803 Engine Ar-Core
| 15***18 | Gear Group-Front | 1 |
| 15***27 | Valve Mechanism Group | 1 |
| 16***00 | Camshaft Group | 1 |
213-2400 Installation Ar-Engine
| 21***00 | Installation Ar-Engine | 1 |
| 21***55 | Mounting Group-Engine | 1 |
| 21***56 | Air Cleaner Group; -With Precleaner | 1 |
Frame And Body
316-6440 Box Gp-Battery
| 31***10 | Box As-Battery, Exhaust Valve, Exhaust Valve; Serviced As 38***91. | 1 |
| 31***25 | Plate | 2 |
| 31***31 | Plate | 1 |
333-0597 Brace Gp
| 33***97 | Brace Group | 1 |
| 33***02 | Actuator, Etr Fuel Control, Electronic Fuel Control Actuator, Brace As | 1 |
| 33***20 | Plate | 1 |
212-8004 Counterweight Gp
| 21***04 | Counterweight Group | 1 |
| 21***60 | Plate As | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 8 |
272-0054 Counterweight Gp
| 14***06 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 21***60 | Plate As | 1 |
212-8001 Frame As-Upper
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 10 |
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 21***01 | Frame As-Upper | 1 |
261-1088 Frame As-Upper
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 10 |
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 26***88 | Frame As-Upper | 1 |
212-8000 Frame Gp-Upper
| 08***87 | Grommet | 4 |
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
261-1087 Frame Gp-Upper
| 08***87 | Grommet | 5 |
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
152-1735 Gear & Bearing Gp-Swing
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 15***35 | Gear & Bearing Group-Swing | 1 |
227-6088 Gear & Bearing Gp-Swing
| 22***73 | Seal-Dust | 2 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
199-4475 Gear & Bearing Gp-Swing
| 19***75 | Gear & Bearing Group-Swing | 1 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
199-4478 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
227-6087 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
199-4476 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
261-1089 Guard Gp-Lighting
| 19***78 | Hinge | 1 |
| 1K***50 | Spring | 1 |
| 25***80 | Guard As | 1 |
247-7641 Guard Gp-Radiator
| 12***36 | Handle | 2 |
| 24***41 | Guard Group-Radiator | 1 |
| 26***82 | Latch As; (Heavy-Duty) | 1 |
216-9865 Guard Gp-Radiator
| 12***36 | Handle | 2 |
| 1K***50 | Spring | 1 |
| 20***38 | Rod As | 1 |
100-3721 Guard Gp-Swivel
| 10***21 | Guard Group-Swivel; (Swivel) | 1 |
| 10***73 | Cover As | 1 |
| 3B***32 | Cotter; (Pin) | 1 |
212-8002 Hood Gp
| 15***11 | Lockwasher | 3 |
| 15***59 | Eyebolt; (M8x1.25x100-mm) | 2 |
| 17***20 | Hinge | 3 |
212-8019 Plate Gp-Frame
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 2 |
| 21***19 | Plate Group-Frame | 1 |
| 7T***99 | Link | 6 |
280-1999 Step As
| 28***99 | Step As | 1 |
235-6512 Step Gp
| 17***94 | Pin As | 2 |
| 23***25 | Step As | 1 |
| 23***12 | Step Group | 1 |
217-9693 Tilt Gp-Hood
| 12***18 | Sleeve | 1 |
| 14***25 | Connector As. | 4 |
| 17***07 | Clip | 2 |
Fuel System
224-5005 Filter Gp-Fuel -Secondary
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 16***77 | Plug As | 3 |
| 17***99 | Base As-Fuel Filter | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
236-0962 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
217-2570 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
216-9868 Lines Gp-Fuel
| 06***51 | Clamp | 6 |
| 09***86 | Clamp; (Hose) | 3 |
| 14***19 | Connector As | 1 |
191-3517 Pump & Mtg Gp-Unit Inj Hyd
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator-Primary
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 18***21 | Pump Group-Fuel Prm & Prim Filter; -With Water Separator-Primary | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep -Primary Fuel Filter
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
166-1759 Pump Gp-Unit Injection
| 16***59 | Pump Group-Unit Injection | 1 |
| 17***80 | Pump Group-Unit Injection | 6 |
172-5780 Pump Gp-Unit Injection
| 17***80 | Pump Group-Unit Injection | 1 |
| 19***20 | Bolt-Socket Head; (M8x1.25x63-mm) | 2 |
| 21***70 | Injector Group-Fuel | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
222-0490 Regulator Gp-Fuel Pressure
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 18***92 | Strap-Grounding | 1 |
| 22***90 | Regulator Group-Fuel Pressure | 1 |
269-0681 Tank Gp-Fuel -Auxiliary
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
Hydraulic System
3g-7232 Bypass Gp-Filter -Hydraulic Oil
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3G***73 | Spring; (Inner) | 1 |
| 3G***32 | Bypass Group-Filter; -Hydraulic Oil | 1 |
171-2446 Cover Gp-Valve End
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 2D***98 | Seal-O-Ring; (44.12mm Id) | 1 |
282-3014 Cylinder & Mtg Gp-Boom
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
282-3152 Cylinder & Mtg Gp-Saw
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
282-3013 Cylinder & Mtg Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
282-3109 Cylinder & Mtg Gp-Stick & Saw -Harvester Head, Lh
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***09 | Cylinder & Mtg Group-Stick & Saw; -Harvester Head, Lh | 1 |
| 28***52 | Cylinder & Mtg Group-Saw | 1 |
217-9701 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 20 |
| 14***27 | Connector Group | 6 |
| 14***76 | Elbow As | 2 |
248-6874 Cylinder Ar-Hydraulic -Boom, Stick
| 24***74 | Cylinder Ar-Hydraulic; -Boom, Stick | 1 |
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***14 | Cylinder & Mtg Group-Boom | 1 |
217-9702 Cylinder Ar-Hydraulic -Boom, Stick
| 14***27 | Connector Group | 4 |
| 14***76 | Elbow As | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 4 |
251-8281 Cylinder Gp-Hood Tilt
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 23***74 | Pin | 2 |
212-8040 Cylinder Gp-Hood Tilt
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 21***40 | Cylinder Group-Hood Tilt | 1 |
215-9097 Cylinder Gp-Hydraulic -Boom
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
226-4970 Cylinder Gp-Stick
| 22***70 | Cylinder Group-Stick | 1 |
| 23***97 | Cylinder As | 1 |
| 23***98 | Rod As | 1 |
215-9092 Cylinder Gp-Stick -Boom
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
254-5457 Cylinder Gp-Tilt -Saw
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
274-7480 Cylinder Gp-Tilt -Saw
| 09***71 | Ring; (Retaining) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
215-9052 Cylinder Gp-Tilt -Saw
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
217-9689 Drive Ar-Swing
| 09***55 | Pin | 1 |
| 11***29 | Bolt; (M24x3x100-mm) | 16 |
| 16***73 | Valve Group-Shutoff | 1 |
220-8623 Drive Gp-Swing
| 20***13 | Motor & Mtg Group-Swing | 1 |
| 22***20 | Drive Group-Swing | 1 |
| 22***23 | Drive Group-Swing | 1 |
201-7808 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
220-8620 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
191-2693 Drive Gp-Swing -Without Motor
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***50 | Coupling-Pipe | 1 |
199-4490 Drive Gp-Swing
| 19***93 | Drive Group-Swing; -Without Motor | 1 |
| 19***90 | Drive Group-Swing | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
126-2075 Filter Gp-Oil -Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
222-7092 Filter Gp-Oil -Hydraulic
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 4 |
| 1R***92 | Filter Element As-Oil; (Advanced Efficiency) | 3 |
| 22***92 | Filter Group-Oil; -Hydraulic | 1 |
094-3245 Gauge Gp-Sight
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
192-2892 Head Gp-Motor -Travel
| 08***59 | Plug As | 1 |
| 09***32 | Bolt-Socket Head; (M12x1.75x95-mm) | 2 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
198-3809 Head Gp-Pump -Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 1 |
270-4694 Head Gp-Pump -Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 2 |
213-2399 Hydraulic Ar -Without Tilt Function
| 21***99 | Hydraulic Ar; -Without Tilt Function | 1 |
| 21***89 | Drive Ar-Swing | 1 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
245-1969 Kit-Seal -Feed Reducer Plug
| 21***30 | Kit-Seal; (Control Valve) | 1 |
| 24***69 | Kit-Seal; -Feed Reducer Plug | 1 |
197-9885 Lever Gp-Control -Hydraulic Lockout
| 16***80 | Lever Group-Control; -Hydraulic Lockout | 1 |
| 17***08 | Cover | 1 |
| 19***85 | Lever Group-Control; -Hydraulic Lockout | 1 |
167-7080 Lever Gp-Control -Hydraulic Lockout
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
217-9705 Lines Gp-Boom -Felling Head
| 14***55 | Union As | 22 |
| 15***26 | Union Assembly | 2 |
| 20***29 | Tag-Identification; (Saw Oil Drain) | 2 |
217-9706 Lines Gp-Boom
| 11***60 | Union | 1 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 4 |
253-2603 Lines Gp-Boom -Harvester Head
| 11***60 | Union | 1 |
| 14***55 | Union As | 8 |
| 15***26 | Union Assembly | 4 |
306-9318 Lines Gp-Control -Crossover, Travel
| 12***40 | Connector | 1 |
| 16***27 | Connector As | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 4 |
217-9707 Lines Gp-Front -Boom, Felling Head
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
217-9708 Lines Gp-Front
| 12***33 | Elbow | 1 |
| 16***48 | Coupling Group | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 9 |
282-3101 Lines Gp-Front -Boom, Stick
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
253-2604 Lines Gp-Front -Boom, Harvester Head
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 14***27 | Connector Group | 3 |
282-3065 Lines Gp-Front -Boom, Harvester Head
| 14***27 | Connector Group | 3 |
| 14***31 | Tee Group | 1 |
| 15***36 | Reducer As | 1 |
282-3102 Lines Gp-Front -Boom, Felling Head
| 25***95 | Hose As | 10 |
| 25***96 | Hose As | 1 |
| 28***02 | Lines Group-Front; -Boom, Felling Head | 1 |
282-3108 Lines Gp-Motor
| 14***55 | Union As | 8 |
| 20***27 | Tag-Identification; (Saw Oil Supply) | 8 |
| 20***28 | Tag-Identification; (Saw Oil Return) | 8 |
217-9694 Lines Gp-Pilot
| 11***65 | Bracket | 1 |
| 11***11 | Tee-O-Ring Port | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 2 |
306-9315 Lines Gp-Pilot
| 11***45 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
306-9316 Lines Gp-Pilot
| 11***45 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
282-3071 Lines Gp-Pump
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
217-9691 Lines Gp-Pump
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 2 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
217-9692 Lines Gp-Return
| 11***34 | Tee-O-Ring | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 2 |
| 14***28 | Connector Assem. | 1 |
217-9709 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
253-2607 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
256-0350 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
217-9703 Lines Gp-Stick
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 5 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
253-2602 Lines Gp-Stick
| 11***60 | Union | 1 |
| 14***55 | Union As | 6 |
| 15***26 | Union Assembly | 3 |
217-9704 Lines Gp-Stick
| 11***60 | Union | 1 |
| 14***39 | Connector As. | 1 |
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 3 |
222-9062 Lines Gp-Travel Motor
| 10***18 | Grommet | 2 |
| 14***60 | Grommet | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
206-1513 Motor & Mtg Gp-Swing
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
179-9775 Motor Gp-Swing
| 17***75 | Motor Group-Swing | 1 |
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
188-4175 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
236-1237 Motor Gp-Travel
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
279-9873 Motor Gp-Travel
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
206-6508 Plug Gp-Hydraulic Lines
| 20***08 | Plug Group-Hydraulic Lines | 1 |
| 6V***30 | Cap As -Lines From Rotate Valve Work | 5 |
| 6V***32 | Cap As | 4 |
217-9690 Pump & Lines Gp-Hyd Tank Fill
| 00***70 | Nipple-Strainer To Flange | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
205-5266 Pump & Motor Gp -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 20***05 | Seal Kit; (Includes Seal And Rings) | 0 |
212-8039 Pump & Motor Gp-Hood Tilt
| 10***96 | Screen-Filter | 1 |
| 10***97 | Tube | 1 |
| 10***98 | Tube | 1 |
217-9700 Pump & Mtg Gp-Main Hydraulic -Felling Head
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 26***29 | Pump Group-Piston; -Main Hydraulic, Felling Head | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 7 |
222-3097 Pump & Mtg Gp-Main Hydraulic -Harvester Head
| 15***58 | Flange | 1 |
| 15***59 | Hub | 1 |
| 15***43 | Coupling & Mtg Group-Pump | 1 |
268-6729 Pump Gp-Piston -Main Hydraulic, Felling Head
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
218-2977 Pump Gp-Piston -Saw
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
268-8259 Pump Gp-Piston
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
217-9699 Pump Gp-Piston -Main Hydraulic, Harvester Head
| 08***01 | Plug As | 3 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***92 | Seal | 1 |
190-8121 Rotating Gp-Motor -Travel
| 19***21 | Rotating Group-Motor; -Travel | 1 |
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
191-0883 Rotating Gp-Motor -Travel
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***29 | Plate-Control | 1 |
| 12***30 | Pin-Center | 1 |
283-5977 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
216-0034 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
216-0028 Rotating Gp-Pump
| 14***60 | Ring; (Seal) | 2 |
| 17***02 | Pin | 1 |
| 17***03 | Piston As | 7 |
216-0035 Rotating Gp-Pump -Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
283-5978 Rotating Gp-Pump
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
283-5979 Rotating Gp-Pump
| 17***02 | Pin | 1 |
| 17***10 | Spring | 4 |
| 17***11 | Plate | 1 |
4i-6263 Rotor Gp-Swivel
| 1U***46 | Sealant (For Locations A) | 0 |
| 4I***63 | Rotor Group-Swivel; (Swivel) | 1 |
| 7Y***03 | Rotor | 1 |
4i-6262 Rotor Gp-Swivel
| 4I***62 | Rotor Group-Swivel | 1 |
| 4I***63 | Rotor Group-Swivel; (Swivel) | 1 |
191-0886 Shaft Gp-Hydraulic Motor
| 09***29 | Ring; (Retaining) | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 19***55 | Kit-Bearing | 1 |
159-5871 Swivel Gp -Without Tilt Function
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 14***63 | Seal As | 5 |
212-8005 Tank Gp-Hydraulic & Fuel
| 09***96 | Bolt; (M20x2.5-Thd) | 4 |
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
214-7687 Tank Gp-Hydraulic & Fuel
| 21***87 | Tank Group-Hydraulic & Fuel | 1 |
306-9323 Tube Gp-Diffuser -Hydraulic Tank
| 27***59 | Tube As | 1 |
| 30***23 | Tube Group-Diffuser; -Hydraulic Tank | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
217-9696 Valve & Lines Gp-Travel Cont -Without Tilt Function
| 09***43 | Retainer | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***37 | Hose Assem. | 1 |
217-9698 Valve & Mtg Gp-Main Control -5-Bank, Harvester Head
| 11***45 | Hose As | 1 |
| 11***17 | Clip | 1 |
| 14***15 | Hose As | 1 |
256-0349 Valve & Mtg Gp-Main Control -7-Bank
| 11***60 | Union | 1 |
| 12***37 | Clip-Loop | 2 |
| 12***23 | Bracket Assem. | 1 |
217-9697 Valve & Mtg Gp-Main Control -7-Bank
| 14***15 | Hose As | 1 |
| 14***09 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
192-3284 Valve Gp-Counterbalance -Travel Motor
| 12***96 | Pin | 2 |
| 12***98 | Seat | 2 |
| 12***99 | Seat | 2 |
194-6973 Valve Gp-Brake -Pressure Release
| 09***56 | Setscrew-Socket | 1 |
| 10***04 | Seal-O-Ring | 1 |
| 16***67 | Dowel | 1 |
192-3293 Valve Gp-Check & Relief -Travel Motor
| 19***93 | Valve Group-Check & Relief; -Travel Motor | 1 |
| 19***94 | Poppet | 1 |
| 19***08 | Spring | 1 |
227-2132 Valve Gp-Control -Inlet
| 17***00 | Valve Group-Flow Control; (Pilot Supply)(Inlet) | 1 |
| 17***01 | Adapter As-Valve | 1 |
| 17***53 | Fitting-37 Degree | 1 |
244-7363 Valve Gp-Control -Stick
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2131 Valve Gp-Control -Travel
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***46 | Kit-Valve | 1 |
234-0586 Valve Gp-Control -Inlet
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 23***86 | Valve Group-Control; -Inlet | 1 |
234-0587 Valve Gp-Control -Boom
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
248-5414 Valve Gp-Control -End Cover
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 24***14 | Valve Group-Control; -End Cover | 1 |
227-2141 Valve Gp-Control -End Cover
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
227-2135 Valve Gp-Control -Swing
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
244-7364 Valve Gp-Control -Lateral Tilt-Hf, Rotator-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
256-0520 Valve Gp-Control -Head Tilt-Hf, Blank-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
247-7010 Valve Gp-Control -Saw Motor Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2136 Valve Gp-Control -Stick
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2140 Valve Gp-Control -Travel
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2133 Valve Gp-Control -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2134 Valve Gp-Control -Felling Head Tilt
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
242-4240 Valve Gp-Control -Intermittent Saw, 2-Bank
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
218-8376 Valve Gp-Control -Travel, 2-Bank
| 21***76 | Valve Group-Control; -Travel, 2-Bank | 1 |
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***40 | Valve Group-Control; -Travel | 2 |
227-2137 Valve Gp-Control -Felling Head Lateral Tilt
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
247-9847 Valve Gp-Control -Inlet
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 24***47 | Valve Group-Control; -Inlet | 1 |
227-2138 Valve Gp-Control -Extension
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***41 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2139 Valve Gp-Control -Rotator
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***37 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
105-8117 Valve Gp-Counterbalance -Hood Tilt Cylinder
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
218-8378 Valve Gp-Main Control -Harvester Head, 5-Bank
| 21***78 | Valve Group-Main Control; -Harvester Head, 5-Bank | 1 |
| 22***32 | Valve Group-Control; -Inlet | 21 |
| 22***35 | Valve Group-Control; -Swing | 1 |
256-0500 Valve Gp-Main Control -7-Bank
| 22***32 | Valve Group-Control; -Inlet | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***35 | Valve Group-Control; -Swing | 1 |
218-8379 Valve Gp-Main Control -7-Bank
| 21***79 | Valve Group-Main Control; -7-Bank | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***34 | Valve Group-Control; -Felling Head Tilt | 1 |
218-1811 Valve Gp-Manifold & Reducing -Pilot Oil
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 3 |
| 21***11 | Valve Group-Manifold & Reducing; -Pilot Oil | 1 |
| 3E***05 | Valve Group-Solenoid; -Variable Fan Speed | 1 |
198-3811 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 12***94 | Plug; (Break Off) | 5 |
| 12***17 | Plug | 1 |
| 15***85 | Dowel | 2 |
270-3521 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***81 | Seat | 2 |
198-3810 Valve Gp-Pump Control -Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***80 | Spring | 2 |
184-3830 Valve Gp-Relief -Swing Motor
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
167-1555 Valve Gp-Selector & Press Cont -Boom
| 10***66 | Adapter | 2 |
| 16***55 | Valve Group-Selector & Press Cont; -Pilot Oil Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
276-9072 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
116-3526 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
195-3739 Valve Gp-Solenoid -Pump Control
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
3e-9205 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
171-3685 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 16***71 | Kit-Seal; (Solenoid Valve) | 1 |
152-8340 Valve Gp-Solenoid -Ride Control
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
222-5781 Valve Gp-Solenoid & Manifold -Disc Saw
| 17***85 | Valve Group-Solenoid | 1 |
| 22***81 | Valve Group-Solenoid & Manifold; -Disc Saw | 1 |
| 22***64 | Cartridge As-Valve | 2 |
196-5862 Valve Gp-Solenoid & Manifold -Pump Torque Limiter Control
| 12***27 | Manifold | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 19***62 | Valve Group-Solenoid & Manifold; -Pilot Lines-Proportional Reducing | 1 |
222-5811 Valve Gp-Solenoid & Manifold -Load Sensing
| 03***21 | Ring-Back-Up | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 16***54 | Seal-O-Ring | 1 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
Implements
212-8011 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
226-5001 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
218-1918 Lines Gp-Grease -Boom
| 21***18 | Lines Group-Grease; -Boom | 1 |
| 24***33 | Hose As | 1 |
| 24***34 | Hose As | 1 |
253-2605 Lines Gp-Grease -Boom, Stick
| 24***35 | Hose As | 1 |
| 24***36 | Hose As | 1 |
| 25***05 | Lines Group-Grease; -Boom, Stick | 1 |
218-1917 Lines Gp-Grease -Boom, Stick
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 14***85 | Clip | 1 |
| 21***17 | Lines Group-Grease; -Boom, Stick | 1 |
212-8010 Linkage Ar-Felling Head
| 21***10 | Linkage Ar-Felling Head | 1 |
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
282-3069 Linkage Ar-Felling Head
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
252-8713 Linkage Ar-Harvester Head
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
218-2974 Linkage Ar-Harvester Head
| 21***11 | Boom Group | 1 |
| 21***16 | Stick Group; -Harvester Head | 1 |
| 21***98 | Valve & Mtg Group-Main Control; -5-Bank, Harvester Head | 1 |
246-6201 Linkage Ar-Harvester Head
| 15***73 | Plug As | 3 |
| 16***81 | Plug As | 8 |
| 21***98 | Valve & Mtg Group-Main Control; -5-Bank, Harvester Head | 1 |
282-3012 Linkage Ar-Harvester Head
| 22***01 | Boom Group | 1 |
| 22***02 | Stick Group; -Harvester Head | 1 |
| 25***02 | Lines Group-Stick | 1 |
252-8717 Linkage Ar-Intermittent Saw
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
212-8014 Linkage Gp-Felling Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
212-7999 Stick As
| 1D***83 | Bolt-Carriage; (3/8-16x1-In) | 2 |
| 21***99 | Stick As | 1 |
| 21***08 | Stick As | 1 |
212-8016 Stick Gp -Harvester Head
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
| 21***98 | Plate As | 1 |
| 21***99 | Stick As | 1 |
226-5002 Stick Gp -Harvester Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
212-8012 Stick Gp -Felling Head
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***15 | Shim (2.0 mm Thick) | 4 |
| 09***34 | Shim; (T=69.85mm) | 2 |
Lubrication System
226-3560 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 22***60 | Filler Group-Engine Oil | 1 |
| 22***65 | Tube As | 1 |
220-1998 Filter Gp-Engine Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 14***64 | Stud; (M8x1.25x35-mm) | 1 |
226-3559 Fumes Disposal Gp
| 22***18 | Bracket | 1 |
| 22***34 | Hose-Fumes Disposal | 1 |
| 22***59 | Fumes Disposal Group | 1 |
219-9960 Gauge Gp-Oil Level (Dipstick) -Engine
| 18***16 | Tube As-Guide; (Rh) | 1 |
| 21***59 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 21***60 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
202-6603 Lines Gp-Engine Oil
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***03 | Lines Group-Engine Oil | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 16***65 | Lines Group-Turbocharger Oil | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
195-8098 Pump Gp-Engine Oil
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
| 33***05 | Pump As-Engine Oil | 1 |
Machine Arrangement
261-1086 Chassis Ar
| 21***02 | Hood Group | 1 |
| 21***04 | Counterweight Group | 1 |
| 21***05 | Tank Group-Hydraulic & Fuel | 1 |
213-2398 Chassis Ar
| 21***00 | Frame Group-Upper | 1 |
| 21***02 | Hood Group | 1 |
| 21***03 | Guard Group-Cab | 1 |
319-6600 Cold Weather Ar
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 31***52 | Battery & Wiring Group | 1 |
262-0999 Common Ar
| 21***99 | Hydraulic Ar; -Without Tilt Function | 1 |
| 21***00 | Installation Ar-Engine | 1 |
| 21***03 | Plate & Film Group | 1 |
213-2395 Common Ar
| 21***95 | Common Ar | 1 |
| 21***98 | Chassis Ar | 1 |
| 21***99 | Hydraulic Ar; -Without Tilt Function | 1 |
242-5335 Conversion Ar-Machine -Without Front Linkage
| 15***73 | Plug As | 1 |
| 16***81 | Plug As | 14 |
| 21***92 | Cylinder Group-Stick; -Boom | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 24***86 | Plate | 2 |
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
178-5524 Adjustment Gp-Console
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 09***15 | Ring-Retaining | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 1 |
243-6303 Air Conditioner & Mounting Gp
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 24***03 | Air Conditioner & Mounting Group | 1 |
| 24***04 | Air Conditioner Group | 1 |
197-4107 Air Conditioner & Mounting Gp
| 18***54 | Filter Element-Cab Air | 1 |
| 19***07 | Air Conditioner & Mounting Group | 1 |
| 19***60 | Air Conditioner Group | 1 |
238-1027 Air Conditioner Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 16***43 | Timer As-On Delay; (24-Volt)(Compressor Cycle Limiter) | 1 |
250-0398 Air Conditioner Gp
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
199-3160 Air Conditioner Gp
| 17***62 | Duct | 1 |
| 17***63 | Duct As | 1 |
| 18***09 | Duct | 1 |
243-6304 Air Conditioner Gp
| 17***63 | Duct As | 1 |
| 19***05 | Gasket | 1 |
| 24***04 | Air Conditioner Group | 1 |
234-6607 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***07 | Armrest Group; -Lh | 1 |
234-6606 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***06 | Armrest Group; -Rh | 1 |
213-2401 Cab Ar-Enclosed Rops
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 19***13 | Duct Group-Cab Air | 1 |
217-2440 Cab Gp-Enclosed Rops
| 19***19 | Window Group-Cab | 1 |
| 21***40 | Cab Group-Enclosed Rops | 1 |
| 25***33 | Rops Group-Enclosed | 1 |
238-5010 Cab Gp-Enclosed Rops
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
| 23***12 | Door Group-Cab | 1 |
238-5013 Cab Gp-Enclosed Rops
| 23***60 | Plate | 1 |
| 23***08 | Window Group-Cab; -Side | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
222-5420 Cab Gp-Enclosed Rops
| 19***20 | Door Group-Cab | 1 |
| 19***56 | Window Group-Cab | 1 |
| 22***19 | Rops Group-Enclosed | 1 |
246-7154 Case Gp-Air Conditioner
| 10***74 | Seal-Connector | 10 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
199-3159 Case Gp-Air Conditioner
| 18***19 | Screw-Hex Flange; (M5x2.24x14-mm) | 6 |
| 18***56 | Switch As-Pressure; (Air Conditioner, Low Side) | 1 |
| 18***57 | Switch As-Pressure; (High Discharge Cut Off) | 1 |
199-3157 Case Gp-Heater & Evaporator
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
177-6729 Case Gp-Heater & Evaporator
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
226-3561 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
204-6974 Console Gp-Operator -Rh
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 5 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 6 |
| 15***99 | Nut | 10 |
245-7924 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
245-7923 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
223-0052 Console Gp-Operator
| 15***75 | Ladder Clip | 2 |
| 16***59 | Console Group-Operator; -Lh | 1 |
| 17***08 | Cushion As-Arm | 1 |
161-3759 Console Gp-Operator -Lh
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 8 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 15***99 | Nut | 8 |
243-5686 Console Gp-Operator
| 18***84 | Cover | 1 |
| 24***86 | Console Group-Operator | 1 |
| 24***23 | Console Group-Operator; -Lh | 1 |
224-4990 Control & Mtg Gp-Joystick -Felling Head
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
223-0671 Control & Mtg Gp-Joystick -Harvester Head
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
238-8167 Control & Mtg Gp-Pedal
| 23***13 | Control Group-Hydraulic Pedal | 1 |
| 23***67 | Control & Mtg Group-Pedal | 1 |
| 23***22 | Plate As | 1 |
235-4122 Control Gp-Handle -Felling Head
| 17***08 | Switch As-Limit | 8 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 26***01 | Film-Overlay; (6-Button, 11.5-mm) | 1 |
223-0716 Control Gp-Handle -Harvester Head, Rh
| 10***51 | Loom; (39 cm) | 0 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***08 | Switch As-Limit | 10 |
223-0715 Control Gp-Handle -Harvester Head, Lh
| 10***51 | Loom; (39 cm) | 0 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***08 | Switch As-Limit | 10 |
231-2613 Control Gp-Hydraulic Pedal
| 11***49 | Pedal Assem.; (L.H.) | 1 |
| 11***50 | Pedal Assem.; (R.H.) | 1 |
| 11***56 | Step Assem. | 2 |
272-7088 Control Gp-Joystick -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***88 | Control Group-Joystick; -Harvester Head, Lh | 1 |
272-7089 Control Gp-Joystick -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***89 | Control Group-Joystick; -Harvester Head, Rh | 1 |
283-2393 Control Gp-Joystick -Felling Head
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 28***93 | Control Group-Joystick; -Felling Head | 1 |
272-7087 Control Gp-Joystick -Felling Head
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 27***87 | Control Group-Joystick; -Felling Head | 1 |
283-2394 Control Gp-Joystick -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 22***63 | Tab | 2 |
283-2395 Control Gp-Joystick -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 28***95 | Control Group-Joystick; -Harvester Head, Rh | 1 |
272-0446 Control Gp-Monitor -Iqan
| 13***92 | Retainer-Captive | 2 |
| 17***33 | Lamp; (Red) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 2 |
241-4146 Control Gp-Monitor -Iqan
| 17***33 | Lamp; (Red) | 1 |
| 18***71 | Cover | 1 |
| 19***06 | Screw-Truss Head; (M5x0.8x16-mm) | 4 |
256-7304 Door Gp-Access -Cab Roof
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***29 | Block | 2 |
237-2374 Door Gp-Access -Air Filter
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 20***05 | Latch As | 1 |
| 23***74 | Door Group-Access; -Air Filter | 1 |
256-1296 Door Gp-Access -Cab Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***81 | Door As-Access; (Cab Roof) | 1 |
| 25***82 | Window | 1 |
212-4540 Door Gp-Access -Cab Roof
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***40 | Door Group-Access; -Cab Roof | 1 |
254-9336 Door Gp-Cab
| 09***55 | Clip | 2 |
| 10***61 | Guard | 1 |
| 10***44 | Latch As-Rotary | 1 |
197-4720 Door Gp-Cab
| 03***72 | Pin-Clevis | 2 |
| 09***55 | Clip | 2 |
| 09***87 | Channel-Trim | 0 |
238-5012 Door Gp-Cab
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***06 | Fastener | 15 |
239-1378 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 16***74 | Louver As-Vent | 10 |
197-2913 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***17 | Louver As | 1 |
| 11***94 | Hose; (66-cm) | 0 |
199-5134 Duct Gp-Air
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 19***21 | Duct | 1 |
250-0861 Frame Gp-Window
| 24***20 | Plate | 2 |
| 24***34 | Angle As | 1 |
| 24***36 | Angle As | 1 |
258-0699 Frame Gp-Window -Thick Glass
| 25***48 | Window; (Center) | 1 |
| 25***50 | Window; (Left) | 1 |
| 25***66 | Angle As | 1 |
212-8003 Guard Gp-Cab
| 19***78 | Hinge | 1 |
| 1K***50 | Spring | 1 |
| 21***03 | Guard Group-Cab | 1 |
197-9880 Guard Gp-Window
| 19***80 | Guard Group-Window | 1 |
| 19***90 | Angle | 1 |
| 19***91 | Guard As | 1 |
213-0235 Handle Gp-Door -Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 21***35 | Handle Group-Door; -Cab | 1 |
| 6V***92 | Screw-Machine; (M4x0.7x25-mm) | 1 |
253-9594 Hatch Gp-Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***04 | Window-Roof; (Cab) | 1 |
| 25***09 | Bar | 1 |
251-6761 Housing Gp-Air Conditioner -Outlet Air
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
202-9627 Housing Gp-Air Conditioner -Outlet Air
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
199-3156 Housing Gp-Air Conditioner -Inlet Air
| 17***90 | Plate | 1 |
| 17***99 | Gasket | 1 |
| 17***05 | Case; (Bottom) | 1 |
220-8420 Installation Gp-Radio
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
238-5024 Installation Gp-Radio
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
302-7455 Liner Gp-Cab
| 26***61 | Foam | 1 |
| 26***62 | Foam | 1 |
| 26***63 | Foam | 1 |
263-2766 Liner Gp-Cab
| 25***25 | Foam | 1 |
| 26***60 | Foam | 1 |
| 26***61 | Foam | 1 |
261-1090 Lines Gp-Air Conditioner
| 06***51 | Clamp | 1 |
| 12***98 | Bracket Assem. | 1 |
| 14***11 | Adapter Group | 1 |
216-9869 Lines Gp-Air Conditioner
| 06***51 | Clamp | 1 |
| 12***98 | Bracket Assem. | 1 |
| 14***11 | Adapter Group | 1 |
251-6137 Mounting Gp-Cab
| 11***31 | Mount Assem. | 8 |
| 24***98 | Sleeve | 8 |
| 24***39 | Washer; (32x135x12-mm Thk) | 6 |
212-8007 Mounting Gp-Cab
| 13***62 | Mount | 8 |
| 13***63 | Sleeve; (36-mm) | 4 |
| 19***40 | Washer As | 3 |
238-5004 Operator Ar
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
| 23***27 | Air Conditioner Group | 1 |
222-5418 Panel Gp-Instrument
| 09***24 | Plug-Button | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 2 |
238-5020 Platform Gp-Operator
222-5412 Platform Gp-Operator
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 19***53 | Tread | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 19***54 | Sleeve | 1 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
200-5731 Radio Gp -Am/Fm/Wb
| 13***90 | Bushing; (Radio Mount) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
331-5292 Radio Gp -Am, Fm
| 19***54 | Sleeve | 1 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
224-7213 Radio Gp -Am/Fm Cassette, Cd Changer
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***25 | Radio Group; (Am/Fm Cassette, Cd Changer)(Deluxe W/ Remote Capabilities) | 1 |
285-2371 Radio Gp -Am/Fm Cassette, Cd Changer
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***26 | Radio Group; (Am/Fm Cd Player) | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
201-4436 Seat Belt Gp -Retractable
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
242-3122 Seat Gp -High Back, Tilt
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 24***22 | Seat Group; -High Back, Tilt | 1 |
161-3781 Seat Gp
| 16***81 | Seat Group | 1 |
| 16***03 | Suspension Group-Seat | 1 |
| 16***06 | Seat Group | 1 |
229-9090 Seat Gp -High Back, Tilt
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
188-0886 Seat Gp-Suspension -Mechanical Suspension
| 16***81 | Seat Group | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
161-3757 Support Gp-Seat
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
| 16***43 | Support As; (Seat) | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
| 23***57 | Support As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
164-0503 Suspension Gp-Seat
| 16***03 | Suspension Group-Seat | 1 |
| 17***54 | Cover Group-Seat; (Suspension) | 1 |
| 17***55 | Kit-Seat Adjuster; (Upper) | 1 |
229-9077 Suspension Gp-Seat
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 24***68 | Cover As | 1 |
245-7892 Suspension Gp-Seat
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
238-5025 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 20***61 | Hose As | 1 |
| 22***64 | Handle As | 1 |
222-5417 Trim Gp-Cab
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***39 | Support-Filter | 1 |
| 13***45 | Stop-Rubber | 4 |
299-5611 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 22***64 | Handle As | 1 |
| 23***73 | Cover-Front; (Upper, Rh) | 1 |
197-2919 Window Gp-Cab
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***19 | Window Group-Cab | 1 |
| 19***21 | Window-Rh | 1 |
196-2392 Window Gp-Cab -Lh
| 13***30 | Hinge-Lh | 2 |
| 15***15 | Gasket | 1 |
| 19***87 | Frame As-Lower | 1 |
238-5008 Window Gp-Cab -Side
| 23***07 | Window; (Rear) | 1 |
| 23***49 | Window; (Right Side, Front) | 1 |
| 23***53 | Window; (Rear Quarter, Left Side) | 2 |
195-0440 Window Gp-Cab -Front
| 14***04 | Screw-Button Head; (M8x1.25x35-mm) | 4 |
| 16***16 | Spacer; (10x16x20-mm Thk) | 4 |
| 19***40 | Window Group-Cab; -Front | 1 |
266-3093 Window Gp-Cab -Front
| 24***34 | Plate | 2 |
| 24***35 | Plate | 1 |
| 25***42 | Angle As | 1 |
197-9956 Window Gp-Cab
| 19***40 | Window Group-Cab; -Front | 1 |
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***21 | Window-Rh | 1 |
197-9865 Window Gp-Front
| 19***60 | Window-Front | 1 |
| 19***63 | Plate | 1 |
| 19***65 | Window Group-Front | 1 |
Power Train
165-6209 Final Drive & Brake Gp
| 09***28 | Ring-Retaining; (External) | 5 |
| 10***22 | Bearing As-Roller | 10 |
| 10***18 | Ring-Retaining | 5 |
279-9869 Final Drive Gp
| 16***09 | Final Drive & Brake Group | 1 |
| 27***69 | Final Drive Group | 1 |
| 27***73 | Motor Group-Travel | 1 |
222-8854 Final Drive Gp
| 16***09 | Final Drive & Brake Group | 1 |
| 22***54 | Final Drive Group | 1 |
| 23***37 | Motor Group-Travel | 1 |
185-0672 Sprocket Gp
| 18***72 | Sprocket Group | 1 |
| 20***58 | Sprocket-Track | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
Service Equipment And Supplies
212-8006 Box Gp-Tool
| 1U***84 | Holder As; (Grease Gun) | 1 |
| 21***06 | Box Group-Tool | 1 |
| 22***47 | Plate | 1 |
269-5490 Film-Instruction -Joystick Control, Pattern 5
| 26***90 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
259-1068 Film-Instruction -Joystick Control, Pattern 1
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
269-5489 Film-Instruction -Joystick Control, Pattern 4
| 26***89 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
269-5492 Film-Instruction -Joystick Control, Pattern 7
| 26***92 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3457 Film-Instruction -Joystick Control, Pattern 7
| 27***57 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3453 Film-Instruction -Joystick Control, Pattern 3
| 27***53 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
279-3456 Film-Instruction -Joystick Control, Pattern 6
| 27***56 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5488 Film-Instruction -Joystick Control, Pattern 3
| 26***88 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
279-3452 Film-Instruction -Joystick Control, Pattern 2
| 27***52 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
269-5491 Film-Instruction -Joystick Control, Pattern 6
| 26***91 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
279-3455 Film-Instruction -Joystick Control, Pattern 5
| 27***55 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
269-5775 Film-Instruction -Joystick Control, Pattern 2
| 26***75 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
279-3454 Film-Instruction -Joystick Control, Pattern 4
| 27***54 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
213-2403 Plate & Film Gp
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
| 13***59 | Plate-Identification; (Engine Stop, Run) | 1 |
228-9470 Plate & Film Gp
| 17***03 | Film-Identification; (300-Ft) | 2 |
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***42 | Film-Warning; (Trip Point) | 1 |
Undercarriage
224-9939 Frame Gp-Undercarriage
| 16***89 | Step As | 1 |
| 21***72 | Frame As-Undercarriage | 1 |
| 22***39 | Frame Group-Undercarriage | 1 |
207-4492 Guard Gp-Travel Motor
| 20***91 | Cover | 2 |
| 20***92 | Guard Group-Travel Motor | 1 |
| 8T***84 | Capscrew; (Hex Hd) (M12 X 1.75 X 45l Gr 10.9) | 16 |
207-0469 Idler Gp-Front
| 10***85 | Seal Group-Duo-Cone | 2 |
| 11***51 | Shaft-Idler | 1 |
| 11***97 | Bearing | 2 |
185-0671 Idler Gp-Front
| 10***09 | Track Adjuster Group | 2 |
| 18***71 | Idler Group-Front | 1 |
| 20***70 | Idler Group-Front | 2 |
207-0470 Idler Gp-Front
| 10***75 | Spring Group-Recoil | 1 |
| 20***69 | Idler Group-Front | 1 |
| 20***70 | Idler Group-Front | 1 |
208-6245 Link As-Track -Grease Lubricated Track
| 15***71 | Ring; (Thrust) | 96 |
| 19***25 | Pin; (Track) | 48 |
| 20***45 | Link As-Track; -Grease Lubricated Track | 1 |
206-1469 Link As-Track -Greased, Heavy-Duty
| 10***18 | Track Bushing; Bushing-Track | 50 |
| 10***25 | Track Link; (R.H.) | 49 |
| 10***26 | Track Link; (L.H.) | 49 |
269-7858 Link As-Track -Grease Lubricated Track
| 15***71 | Ring; (Thrust) | 96 |
| 19***25 | Pin; (Track) | 48 |
| 20***44 | Seal As | 96 |
198-1001 Link As-Track -Grease Lubricated Track
| 15***71 | Ring; (Thrust) | 98 |
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 19***25 | Pin; (Track) | 49 |
224-9064 Roller Ar-Track
| 20***63 | Roller Group-Track-Double Flange | 16 |
| 20***64 | Roller Group-Track-Single Flange | 6 |
| 22***64 | Roller Ar-Track | 1 |
336-7736 Roller Ar-Track -Star
| 25***95 | Roller Group-Track-Single Flange | 4 |
| 33***36 | Roller Ar-Track; -Star | 1 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 16 |
228-6415 Roller Ar-Track & Carrier
| 20***63 | Roller Group-Track-Double Flange | 16 |
| 20***64 | Roller Group-Track-Single Flange | 2 |
| 22***04 | Roller Group-Track-Single Flange | 4 |
228-6403 Roller Gp-Track
| 19***61 | Roller Group-Track-Single Flange | 1 |
| 22***03 | Roller Group-Track | 1 |
206-1263 Roller Gp-Track-Double Flange
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 20***62 | Roller & Bearing As | 1 |
228-6404 Roller Gp-Track-Single Flange
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 22***04 | Roller Group-Track-Single Flange | 1 |
197-4161 Roller Gp-Track-Single Flange
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 19***61 | Roller Group-Track-Single Flange | 1 |
206-1264 Roller Gp-Track-Single Flange
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 20***64 | Roller Group-Track-Single Flange | 1 |
254-4095 Roller Gp-Track-Single Flange
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 25***95 | Roller Group-Track-Single Flange | 1 |
101-7875 Spring Gp-Recoil
| 10***75 | Spring Group-Recoil | 1 |
| 10***76 | Support As | 1 |
| 10***80 | Spring | 1 |
102-8109 Adjustment Gp-Hydraulic Track
| 09***36 | Seal-Lip Type | 1 |
| 09***12 | Ring, Back-Up | 2 |
| 09***19 | Seal-O-Ring (Id=59.60mm) | 2 |
269-7860 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
| 26***60 | Track Group; -2-Required | 1 |
209-8658 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***45 | Link As-Track; -Grease Lubricated Track | 1 |
| 20***35 | Shoe; (Track) | 48 |
207-5896 Track Gp -2-Required
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***96 | Track Group; -2-Required | 1 |
207-5282 Track Gp -2-Required
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***82 | Track Group; -2-Required | 1 |
228-1651 Track Gp -2-Required
| 19***01 | Link As-Track; -Grease Lubricated Track | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 192 |
| 20***74 | Shoe-Track | 48 |
269-7859 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***97 | Shoe-Track | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
206-1482 Track Gp -2 Required
| 10***42 | Bolt-Track Master; (3/4-16x2.9-In) | 2 |
| 10***19 | Bolt-Track Master; (3/4-16x3.9-In) | 2 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
206-1478 Track Gp -2-Required
| 10***42 | Bolt-Track Master; (3/4-16x2.9-In) | 2 |
| 10***19 | Bolt-Track Master; (3/4-16x3.9-In) | 2 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
207-4872 Track Gp -2 Required
| 10***42 | Bolt-Track Master; (3/4-16x2.9-In) | 2 |
| 10***19 | Bolt-Track Master; (3/4-16x3.9-In) | 2 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
269-7861 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***83 | Shoe-Track | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
269-7863 Track Gp
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***74 | Shoe-Track | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
269-7862 Track Gp -2-Required
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***35 | Shoe; (Track) | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
228-0770 Undercarriage Ar
| 22***70 | Undercarriage Ar | 1 |
| 22***51 | Track Group; -2-Required | 2 |
| 25***95 | Roller Group-Track-Single Flange | 4 |
222-6809 Undercarriage Ar
| 19***61 | Roller Group-Track-Single Flange | 6 |
| 20***78 | Track Group; -Greased, Heavy-Duty | 2 |
| 22***09 | Undercarriage Ar | 1 |
228-0771 Undercarriage Ar
| 22***01 | Undercarriage Ar | 1 |
| 22***71 | Undercarriage Ar | 1 |
| 22***51 | Track Group; -2-Required | 2 |
219-4802 Undercarriage Ar
| 21***02 | Undercarriage Ar | 1 |
| 26***62 | Track Group; -2-Required | 2 |
239-1304 Undercarriage Ar
| 23***04 | Undercarriage Ar | 1 |
| 26***60 | Track Group; -2-Required | 2 |
222-6808 Undercarriage Ar
| 19***61 | Roller Group-Track-Single Flange | 6 |
| 20***72 | Track Group; -2 Required | 2 |
| 22***08 | Undercarriage Ar | 1 |
222-6810 Undercarriage Ar
| 19***61 | Roller Group-Track-Single Flange | 6 |
| 20***82 | Track Group; -2 Required | 2 |
| 22***10 | Undercarriage Ar | 1 |
222-6811 Undercarriage Ar
| 20***96 | Track Group; -2-Required | 2 |
| 22***01 | Undercarriage Ar | 1 |
| 22***11 | Undercarriage Ar | 1 |
219-4797 Undercarriage Ar
| 20***72 | Track Group; -2 Required | 2 |
| 21***97 | Undercarriage Ar | 1 |
| 22***03 | Roller Group-Track | 6 |
219-4800 Undercarriage Ar
| 21***00 | Undercarriage Ar | 1 |
| 26***59 | Track Group; -2-Required | 2 |
222-6812 Undercarriage Ar
| 20***82 | Track Group; -2-Required | 2 |
| 22***01 | Undercarriage Ar | 1 |
| 22***12 | Undercarriage Ar | 1 |
219-4801 Undercarriage Ar
| 21***01 | Undercarriage Ar | 1 |
| 26***61 | Track Group; -2-Required | 2 |
219-4782 Undercarriage Ar -Without Tilt Function
| 10***21 | Guard Group-Swivel; (Swivel) | 1 |
| 15***35 | Gear & Bearing Group-Swing | 1 |
| 18***71 | Idler Group-Front | 1 |
222-6813 Undercarriage Ar
| 20***58 | Track Group; -2-Required | 2 |
| 22***01 | Undercarriage Ar | 1 |
| 22***13 | Undercarriage Ar | 1 |
222-6801 Undercarriage Ar
| 10***21 | Guard Group-Swivel; (Swivel) | 1 |
| 15***35 | Gear & Bearing Group-Swing | 1 |
| 18***71 | Idler Group-Front | 1 |
219-4799 Undercarriage Ar
| 20***82 | Track Group; -2 Required | 2 |
| 21***99 | Undercarriage Ar | 1 |
| 22***03 | Roller Group-Track | 6 |
219-4798 Undercarriage Ar
| 20***78 | Track Group; -Greased, Heavy-Duty | 2 |
| 21***98 | Undercarriage Ar | 1 |
| 22***03 | Roller Group-Track | 6 |
TK721 serial number reference
The PIN plate on a TK721 is a riveted metal tag on the main frame/undercarriage structure, in line with placement on other Cat-branded track machines; check the machine's PIN diagram for the exact spot on your unit. Read the first three characters before the numeric sequence as the prefix (for example TKB00194 = prefix TKB, sequence 00194). On these TimberKing-heritage machines the prefix ties the unit to its model/series rather than to a plant code.
| Prefix | Identifies | Notes |
|---|---|---|
| TKB | Cat/TimberKing TK721 track feller buncher, all configurations | Confirmed on a 2004-model TK721 unit. TK721's family (TK711/TK722/TK732/TK741/TK751/TK752) uses sequential single-letter prefixes; TK711 uses TKA on a separately confirmed unit, consistent with TKB for TK721. Not yet seen on a second TK721 unit — confirm with dealer/SIS before using for date or configuration decoding. |
Frequently asked questions
What engine does the Caterpillar TK721 use?
The TK721 track feller buncher runs a Caterpillar C9 (C-9), an 8.8-liter six-cylinder turbocharged diesel with HEUI fuel injection and ADEM3 electronic control. Not published on a factory spec sheet for this model — verify the exact rating for your serial number with your dealer.
What is the operating weight of the Caterpillar TK721?
Roughly 27,080 kg (59,710 lb). This figure comes from limited available dealer and spec data rather than a broadly published factory sheet, so treat it as a working estimate and confirm against your machine's serial-specific spec plate.
What replaced the Caterpillar TK721?
Caterpillar brought the TimberKing-era TK-series fully in-house after acquiring Blount's Forestry Division assets in 2007. The TK7 family of track feller bunchers (TK711, TK721, TK722, TK732, TK741, TK751, TK752) was succeeded by Caterpillar's own 5-series track feller bunchers (511/521/521B/522/532).
What TK721 owners discuss
What do mechanics say about the TK721's C-9 engine and fuel system?
The TK721 carries Cat's C-9, an 8.8 L (537 cu in) inline-six with hydraulically actuated electronic unit injectors (HEUI). Model-specific complaint threads for the TK721 are scarce online, so this reflects general service experience with the C-9/HEUI family it shares. Injectors are the most fuel-sensitive wear item: dirty fuel or worn seals lead to plugging and hardening, showing up as rough idle, hard warm starts, and falling power well before a scheduled overhaul. Worst case is a stuck-open or cracked injector tip pushing actuation oil into a cylinder, which can cause a runaway. In logging duty, tighten up fuel filtration and shorten filter change intervals versus the book schedule, since dust and rough fuel handling in the field accelerate injector wear. Have your dealer verify injector and HEUI pump condition with an electronic service tool before assuming a hard-start or power complaint is simple fuel starvation.
Is undercarriage wear on the TK721 different from other tracked feller bunchers its size?
No TK721-specific undercarriage threads turned up, so this is class-level guidance for feller bunchers in its roughly 27,000 kg (59,000 lb) weight bracket. Sprockets, rollers, idlers, track pads, and chain wear faster on feller bunchers than on machines that mostly travel in straight lines, because the boom swings and drops loads while the tracks hold position, putting heavy side-load and shock into the undercarriage. Used-equipment listings for this class routinely describe undercarriage condition as a wear percentage rather than by hours, which is a sign buyers weight this heavily. Track sag and pin/bushing elongation are the first things an experienced buyer checks. Have your dealer verify actual undercarriage wear with a track-sag and pin/bushing measurement rather than a walk-around visual estimate.
What hydraulic or swing-bearing behavior is typical for this machine?
The TK721's felling head uses accumulator arms and cushioned cylinders on a slewing upper. Genuine TK721-specific hydraulic complaints are thin in public discussion, but operators of disc-saw feller bunchers in general consistently flag the swing bearing and swing drive as the hardest-worked component, since every tree grab-and-drop cycle shock-loads it. Play or backlash felt in the swing is a common wear complaint across brands in this machine class, not unique to Cat/TimberKing. Boom and tilt cylinder drift after extended hours is also a recurring theme and usually points to seal wear rather than pump failure. Have your dealer verify swing bearing bolt torque and backlash, and check cylinder drift under load, before returning a machine with reported play to full duty.
What electrical or sensor issues come up with C-9-powered machines like the TK721?
Specific TK721 electrical fault threads were not found; the following draws on the wider HEUI-era C-9 engine family plus general severe-duty forestry-equipment experience. On these engines, an injection actuation pressure (IAP) fault can trace back to a bad sensor, a weak HEUI pump, a leaking injector, or even low oil level, so the code alone does not point to one part. Separately, forestry machines in general are hard on wiring: harness chafe, corroded connectors, and debris intrusion near the felling head and boom are common causes of intermittent sensor faults that have nothing to do with the sensor itself. Check grounds and connector condition before swapping sensors. Have your dealer verify any active fault code with the electronic service tool rather than clearing and hoping it does not return.
What do owners say about the TimberKing heritage behind the TK721 and parts support?
The TK-badge line (including TK711/TK721/TK722/TK732 and larger siblings) dates to the period after Caterpillar acquired the Blount forestry equipment business, which had included Hydro-Ax, Prentice, and CTR; the TK badge was a transition identity before machines moved fully under the Cat name. General forum sentiment on these transition-era TK machines is that they are solid, workable equipment with parts still obtainable, though buyers should not assume parts or engine commonality across the whole TK family: sibling TK models in this same lineup were built with different engines (some Deere, some Cat/Perkins) depending on model and vintage, while the TK721 itself uses Cat's own C-9. Confirm the specific powertrain fitted to the unit in front of you rather than assuming it matches another TK model.
Does the TK721 have any known cooling or debris-buildup issues typical of forestry duty?
No TK721-specific cooling complaints were found, but radiator and cooler screen packing with bark, chips, and dust is a near-universal issue on tracked forestry machines working close to a felling head, regardless of brand or engine. Reduced airflow from a packed core shows up as gradual overheating under load rather than a sudden failure, and is often mistaken for a coolant or water pump problem. Daily blow-down of screens and cores in chip-heavy conditions is standard practice among forestry mechanics for this reason. Have your dealer verify actual coolant flow and core condition if overheating persists after cleaning, since debris buildup can mask a genuine water pump or thermostat fault underneath it.
What should a buyer check before purchasing a used TK721?
Because published spec sheets for this model are limited, buyers lean more heavily on physical inspection and service history than on catalog data. At minimum: verify the machine identity and configuration against its PIN/serial rather than the sales listing alone; check undercarriage wear (track sag, pin/bushing condition, sprocket and roller wear) rather than trusting a visual pass; pull engine hours together with injector and HEUI pump service history on the C-9; check the felling head disc and teeth for wear and the accumulator arm cylinders for drift or leakage; feel for play in the swing bearing under load; and inspect wiring and connectors around the boom and felling head for chafe or corrosion from years of debris exposure. Have your dealer verify PIN/serial identity and run a full engine and hydraulic diagnostic before finalizing purchase, since thin published documentation makes an independent inspection the main safeguard on this model.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific TK721 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.