Caterpillargenerator(no series)
Caterpillar SR5
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar SR5 is a brushless, salient-pole synchronous generator end, not a complete self-contained machine and not a genset in itself. It ships separately from the engine and is factory-matched to a Cat diesel: the 3500-series 3512, 3512C, 3516B, 3516C, and 3516C-HD, the current 3516E, and the industrial C27 and C32. Caterpillar builds the SR5 across a range of documented frame sizes (1424, 1447, 1622, 1647, 1668, 1824, 1844, 1866, and 3045 have been recorded on nameplates), each with its own bare weight; a mid-size 1824 frame runs roughly 5,400 kg (12,000 lb), with the largest 1844/1866/3045 frames running heavier still. Standby output spans roughly 1,000 kW up into the mid-3,000 kW range at voltages from about 440V to 4160V, depending on frame, speed, and winding. Buyers choose between permanent-magnet (PM) or internal/self (IE) excitation and between single-bearing (close-coupled to the engine flywheel) or double-bearing (own drive-end bearing plus a flexible coupling) construction, with 2/3-pitch or full-pitch stator windings offered within the range.
Within the SR5 line the real variable is frame size and engine pairing, not a model-year letter suffix; a 1447-frame SR5 built for a 3512C and a 1866-frame SR5 built for a 3516E share a family name but almost nothing else in terminal box, coupling, or winding data. The SR5 shares its voltage-regulator architecture and general layout with the earlier SR4/SR4B generator ends, which carry lower temperature-rise ratings; sources do not document a clean generation-by-generation handoff from SR4/SR4B to SR5, so treat SR4/SR4B as a related predecessor family rather than a direct one-for-one ancestor. No documented successor has replaced the SR5 - it remains Caterpillar's current large-frame generator end, still specified against the current 3516E and C32 engines. That ongoing pairing is exactly why SR5 turnover in the used and parts market stays active: rental fleets, paralleling switchgear integrators, and oilfield or data-center operators buy and swap SR5 generator ends as standalone units to re-power existing 3512/3516 blocks, which makes matching the correct frame number, voltage, and stator pitch more important than chasing a serial-range succession.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar SR5 specifications
Engine
| Prime mover pairing | SR5 is a generator end (alternator), not a self-contained engine-driven machine. It is factory-paired with diesel engines across the 3512/3516 platform (3512, 3512C, 3516B, 3516C, 3516C-HD, 3516E) depending on the genset package ordered. No single fixed engine model, power rating, displacement, cylinder count, or emissions tier applies to the SR5 itself — those figures belong to the paired engine and vary by package. |
| Rated speed | 1800 rpm at 60 Hz; 1500 rpm at 50 Hz |
Weights
| 1447 frame (1000 kW / 1250 kVA, 600 V, single bearing) | approx. 4536 kg (10,000 lb) |
| 1824 frame (2500 kW / 3125 kVA, 4160 V, double bearing) | approx. 5443 kg (12,000 lb) |
| Other frames (1424, 1622, 1647, 1668, 1844, 1866) | weight not published for these frames; varies by frame size and configuration — confirm with a dealer for the exact frame ordered |
Dimensions
| 1447 frame footprint (L x W x H) | 2362 x 1727 x 1753 mm (93 x 68 x 69 in) |
| 1424 frame footprint (L x W x H) | 1651 x 940 x 864 mm (65 x 37 x 34 in) |
| Mounting | SAE flywheel housing interface (SAE 21 flywheel, 00 housing common across larger frames); direct-coupled to the engine flywheel, no separate coupling dimensions published |
| Other frame dimensions | not published for 1622, 1647, 1668, 1824, 1844, 1866 frames — varies by frame size |
Performance
| Power factor | 0.8 |
| Excitation | Permanent magnet excitation (PMG) with digital voltage regulator |
| Insulation class | Class H, 150°C temperature rise (documented on smaller frames; larger frames not confirmed) |
| Winding | Random wound on smaller frames (e.g. 1424); form wound on larger frames (e.g. 1668, 1844, 1824) |
| Bearing configuration | Single bearing on smaller frames; double bearing on larger frames — varies by frame size |
| Leads | 6-lead, WYE connection, three-phase |
| Enclosure protection | IP23 standard; IP44 available as an option |
| Rated power range across the SR5 line | roughly 1000 to 3000+ kW standby depending on frame and voltage (440 to 4160 V documented) |
Service capacities (summary)
| Fuel tank, hydraulic system, engine oil, cooling system | Not applicable to the bare SR5 generator end. It has no fuel tank, hydraulic system, engine oil, or cooling system of its own — these are set by the diesel engine and base/tank design of the assembled genset package, not by the alternator. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
SR5 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not applicable to the SR5 itself — no capacity is published for it as a standalone figure | The SR5 is a generator end (alternator/rotating rectifier assembly), not a self-contained engine-driven machine. It ships as a component paired to a customer-selected diesel or gas engine chosen for the target kW rating and frame size (documented pairings include 3412C, 3512, 3516, C18, C27, C32, and C6.6). Crankcase oil grade, viscosity-by-climate, and fill capacity are set by that paired engine's own operation and maintenance manual, not by SR5 generator-end documentation. |
| Cooling system | Not applicable to the SR5 itself | Same reasoning as the crankcase line: the generator end has no coolant circuit of its own. Coolant type (Cat ELC or equivalent) and system capacity belong to the paired engine/radiator package and vary by engine model and enclosure. |
| Fuel tank | Not applicable to the SR5 itself | The generator end has no fuel system. Tank size and diesel/fuel spec are set by the base-frame or sub-base fuel tank chosen for the genset package, which varies by installation. |
| Hydraulic system and tank | Not applicable to the SR5 itself | No hydraulic reservoir or circuit is part of the SR5 generator end. Where a genset package for a given serial number references hydraulic schematics, those cover accessory circuits on the engine/skid package, not the generator end. |
| Generator bearing(s) — grease (single- or double-bearing design, per frame) | Roughly 50 to 57 g (1.8 to 2.0 oz) per relube on shielded ball-bearing generator ends; roughly 28 g (1 oz) per relube on spherical-roller-bearing generator ends, per the generator maintenance documentation shared across the SR4/SR5 family. Confirm exact frame/bearing type and interval against the serial-specific SR5 manual before scheduling. | Cat Special Purpose Grease (SPG), NLGI No. 2 grade, polyurea thickener, rated over a wide temperature range (roughly -29°C to 177°C / -20°F to 350°F), for shielded ball-bearing generator ends, relubed on the order of every 2000 service hours. For spherical-roller-bearing generator ends (larger double-bearing frames), a clay-thickened NLGI No. 1½ generator-bearing grease is specified, relubed on the order of every 1000 service hours. No separate engine-oil-style viscosity-by-climate chart applies — bearing grease selection is by NLGI grade and temperature range, not seasonal viscosity grade. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar SR5 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the SR5 beyond the schedule
Predictive Maintenance & Fluid Analysis
Trend stator insulation resistance and polarization-index readings at every scheduled test rather than reading them once - a declining trend line catches winding degradation long before a single megger reading fails outright. Thermally image the main terminal box and bus connections on double-bearing 1824/1844/1866/3045 frames to catch a loose lug before it cooks a connection. Vibration-check the flexible coupling between the generator rotor and the paired 3512/3516/C27/C32 crankshaft; rising radial vibration there often traces back to a wearing engine-side thrust bearing, not the generator end itself.
Corrective & Common Repairs
Most SR5 corrective calls trace to three points: a failed rotating rectifier/diode bridge on IE-excited units causing loss of excitation or unstable voltage; a worn flexible coupling disc between the rotor and the paired 3512/3516-series flywheel causing vibration and bearing wear; and loose, corroded main terminal-box lugs that overheat under load. On PM-excited frames, chase erratic voltage to the AVR or pilot-exciter leads before condemning the main stator. Moisture-driven insulation-resistance drops after storage or coastal service usually clear with a proper dry-out, not a rewind.
Overhaul & Rebuild Points
A full SR5 overhaul centers on the stator and rotor, not a chassis. Rewind or re-varnish stator windings once insulation-resistance and polarization-index trends confirm breakdown, and re-dip-and-bake end windings rather than spot-patching them. Replace drive-end and non-drive-end main bearings as a pair on double-bearing 1824/1844/1866/3045 frames, and rebalance the rotor after any pole-winding work. Replace the rotating rectifier/diode bridge on IE-excited units as a complete assembly, never one diode at a time. Re-terminate and re-torque every main and neutral bus connection before returning the set to service.
Seasonal & Environment Servicing
With no engine coolant or oil sump of its own, the SR5's environmental risk is moisture and dust inside the stator, not freeze-up. Confirm anti-condensation space heaters and thermostats work before any extended shutdown or winter lay-up, and re-check insulation resistance after storage before re-energizing. On coastal, offshore, or humid oilfield installs, inspect enclosure seals and drain points for condensation tracking into the terminal box. In desert or mining dust environments, keep cooling-air louvers and filters clear so airflow across the windings isn't restricted.
SR5 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 141-0284 | Kit-Fuel Filter & Waterseparator | Fuel system service | Check fitment → |
| 226-2779 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
SR5 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure data valid but below normal operating range for current engine speed | Low oil level, worn oil pump, plugged filter, or a failing pressure sensor | Check oil level and filter condition first, then verify sensor wiring before replacing the sensor |
| 100-03 | Oil pressure sensor circuit voltage above normal (open circuit or short to supply) | Damaged or corroded sensor wiring/connector, or a failed pressure sensor | Inspect the sensor connector and harness for damage or corrosion before swapping the sensor |
| 110-03 | Engine coolant temperature sensor circuit voltage above normal | Open or shorted sensor wiring, corroded connector, or a failed sensor | Check harness continuity and connector condition, then test sensor resistance against spec |
| 168-00 | Electrical system (charging/battery) voltage above normal | Faulty voltage regulator on the charging alternator, bad battery cell, or a loose ground | Check charging system output with a meter and inspect battery condition |
| 168-01 | Electrical system (charging/battery) voltage below normal | Weak or discharged starting battery, failing alternator, or loose/corroded connections | Load-test the battery and inspect the charging circuit wiring |
| 190-00 | Engine speed data valid but above normal operating range (overspeed) | Governor or fuel system malfunction, sudden load rejection, or a faulty speed sensor | Verify actual engine rpm with a handheld tachometer, then check the governor and speed sensor circuit |
| Overcrank / Fail to Start | Engine did not start within the programmed total crank-cycle time | Fuel supply interruption, weak battery or starter, air in the fuel system, or a data-link fault between the engine ECM and the genset controller | Check fuel supply and battery/starter circuit first, then verify the ECM-to-control-panel data link |
| Emergency Stop | Emergency stop circuit is open; the control panel locks out starting until the condition is cleared | E-stop pushbutton pressed or stuck, or a wiring fault in the normally-closed E-stop loop | Verify the E-stop button is released, then check continuity of the E-stop loop wiring |
| Low Coolant Level | Coolant level switch input indicates coolant below the safe minimum level | Coolant leak, low system fill, or a faulty level switch | Visually check coolant level and inspect for leaks before checking the level switch wiring |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
SR5 attachments & work tools
Engine pairing (genset packaging)
SR5 is a generator end, not a standalone machine; it is factory-paired to diesel engines rather than offered with excavator-style work tools. Common pairings place it with Cat 3512 and 3516 series diesel engines, which cover roughly 890 to 1750 ekW (60 Hz) genset ratings; larger frame/voltage combinations push the packaged rating toward 2250 to 2750 kW standby. Exact engine pairing depends on frame size and voltage class ordered.
Frame and power class range
SR5 spans several frame sizes (seen as 1424, 1447, 1647, 1824/1844) that set the power and voltage envelope. Standby output across the line runs from roughly 1000 kW up to about 2750 kW depending on frame, voltage, and 50/60 Hz configuration; treat any single kW figure as one configuration point, not the whole range.
Coupling and mounting system
The alternator is direct-coupled to the engine flywheel using SAE flywheel and flywheel-housing sizing (SAE 00 housing commonly cited, paired with a flywheel size such as SAE 21 depending on engine). No separate quick-coupler or hydraulic mounting system applies since this is a generator end, not a work-tool carrier.
Bearing arrangement
SR5 is offered in both single-bearing (rotor overhung, supported by the engine flywheel/housing) and two-bearing (double bearing, self-supporting rotor) configurations. Bearing arrangement is chosen at order time based on engine coupling and skid design, and varies by configuration/series.
Excitation system options
Two excitation options are offered: Internally Excited (IE), which uses an auxiliary winding plus permanent magnets in the exciter stator (also called AREP-type excitation), and a Permanent Magnet Generator (PMG) exciter. Cat documentation states the two give equivalent fault-clearing and motor-starting performance; choice is a factory/order-time option, not a field-installable attachment.
Winding and insulation options
Stator windings are offered as random-wound or form-wound depending on frame/rating, with Class H insulation system as the baseline. Coastal or tropical protective treatment of the windings is available as an option for humid or marine-adjacent installations.
Enclosure and ingress protection
Standard enclosure is drip-proof, guarded, rated around IP22, suitable for indoor or sheltered outdoor installation. Heavier ingress protection or weatherproof enclosures are project-specific options handled at the genset-package level rather than a standard SR5 catalog option.
Electrical output configuration
Standard output is three-phase, six-lead reconnectable, with a 0.8 power factor design point. Line voltage varies by winding/frame selection, commonly seen at 480V or 600V and, on larger frames, medium-voltage output such as 4160V; frequency is set by engine speed (1800 rpm for 60 Hz, 1500 rpm for 50 Hz).
Monitoring and protection options
Available factory options include embedded stator (main armature) winding RTDs and, on larger frames, main bearing temperature RTDs, plus space heaters to protect windings from condensation during standby or storage. These are monitoring/protection add-ons rather than work tools, and availability varies by frame size.
Control panel and switchgear compatibility
SR5-based generator sets are controlled through Cat EMCP-series generator set controllers and can be integrated into Cat paralleling switchgear (such as EPIC or EGP-type systems) for multi-unit sites needing utility paralleling or load sharing. Panel and switchgear selection is a system-level package decision, not a bolt-on attachment to the alternator itself.
All SR5 assemblies by section
Every catalogued assembly group for the Caterpillar SR5. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
209-4454 Adapter Gp-Air Cleaner
| 12***29 | Clamp; (V-Band) | 2 |
| 12***00 | Adapter | 1 |
| 20***54 | Adapter Group-Air Cleaner | 1 |
209-4453 Adapter Gp-Air Cleaner
| 12***29 | Clamp; (V-Band) | 2 |
| 12***00 | Adapter | 1 |
| 20***53 | Adapter Group-Air Cleaner | 1 |
226-2773 Air Cleaner Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 14 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
226-2774 Air Cleaner Gp
| 12***29 | Clamp; (V-Band) | 2 |
| 12***00 | Adapter | 1 |
| 21***88 | Hose | 6 |
214-6045 Bellows As
| 10***93 | Stud-Taperlock; (3/8-16x2.36-In)(3/8-16x60 Thd) | 2 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 24 |
| 12***52 | Gasket-Exhaust Manifold | 12 |
5l-7520 Elbow-Exhaust
| 10***93 | Stud-Taperlock; (3/8-16x2.36-In)(3/8-16x60 Thd) | 2 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 12 |
| 11***23 | Spacer; (11.13x19.05x19-mm Thk) | 12 |
356-5598 Exhaust Gp
| 20***51 | Elbow-Air | 2 |
| 22***98 | Manifold-Inlet | 2 |
| 22***13 | Gasket | 2 |
280-7399 Fastener Gp-Exhaust Manifold
| 13***81 | Precleaner As; -Air Cleaner, Cup, Bearing | 1 |
| 17***95 | Clamp | 2 |
| 28***88 | Adapter | 1 |
7n-6967 Fitting Gp-Exhaust -Flexible
| 28***75 | Support As | 1 |
| 28***76 | Support As | 1 |
| 29***45 | Plate | 2 |
170-8403 Fitting Gp-Exhaust
| 17***03 | Fitting Group-Exhaust | 1 |
5n-2457 Fitting Gp-Exhaust -Flexible
| 27***34 | Mounting Group-Air Cleaner | 2 |
| 5N***57 | Fitting Group-Exhaust; -Flexible | 1 |
7n-6961 Flange Gp-Exhaust
| 28***30 | Shield As-Heat | 1 |
| 7N***61 | Flange Group-Exhaust | 1 |
2w-7871 Flange Gp-Exhaust
| 28***37 | Shield As-Heat; (Lh) | 1 |
| 28***38 | Shield As-Heat; (Rh) | 1 |
| 2W***71 | Flange Group-Exhaust | 1 |
7n-6782 Indicator Gp-Air Filter Change
292-1161 Lines Gp-Air
| 29***61 | Lines Group-Air | 1 |
| 32***01 | Shield As-Heat; (Rh) | 1 |
| 32***02 | Shield As-Heat; (Lh) | 1 |
257-0360 Lines Gp-Air
| 21***64 | Shield As-Heat; (Turbocharger) | 1 |
| 21***65 | Shield As-Heat; (Lh) | 1 |
| 21***66 | Shield As-Heat; (Rh-Front) | 1 |
295-7613 Lines Gp-Air
| 29***13 | Lines Group-Air | 1 |
301-5157 Lines Gp-Air
| 13***94 | Elbow As | 2 |
| 22***73 | Air Cleaner Group | 2 |
| 23***35 | Clamp | 2 |
270-0453 Lines Gp-Air
| 24***56 | Film-Warning; (Hot Surface, Hands Clear) | 1 |
| 27***53 | Lines Group-Air | 1 |
| 27***21 | Guard As | 1 |
273-6002 Lines Gp-Air
| 27***02 | Lines Group-Air | 1 |
| 28***27 | Shield As-Turbocharger | 2 |
| 28***28 | Shield As-Turbocharger; (Turbocharger Outlet, Rh) | 1 |
343-1783 Lines Gp-Air
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***78 | Valve As; (Air Shutoff) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
310-8396 Lines Gp-Air
| 13***94 | Elbow As | 2 |
| 22***74 | Air Cleaner Group | 2 |
| 23***35 | Clamp | 2 |
280-7398 Manifold Gp-Exhaust
| 11***23 | Spacer; (11.13x19.05x19-mm Thk) | 2 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 2 |
| 28***98 | Manifold Group-Exhaust | 1 |
261-0500 Manifold Gp-Exhaust
| 21***23 | Brace | 1 |
| 22***58 | Brace | 1 |
| 26***00 | Manifold Group-Exhaust | 1 |
329-0099 Manifold Gp-Inlet
| 26***60 | Clamp As; (Compressor) | 1 |
| 30***78 | Cartridge Group-Turbocharger | 1 |
| 32***99 | Manifold Group-Inlet | 1 |
287-0380 Mounting Gp-Air Cleaner
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 24***70 | Block-Mounting | 4 |
| 27***13 | Cooler-Fuel | 1 |
280-1189 Mounting Gp-Air Cleaner
| 11***23 | Spacer; (11.13x19.05x19-mm Thk) | 2 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 2 |
| 28***89 | Mounting Group-Air Cleaner | 1 |
279-0734 Mounting Gp-Air Cleaner
| 26***60 | Clamp As; (Compressor) | 1 |
| 27***34 | Mounting Group-Air Cleaner | 1 |
| 32***53 | Cartridge Group-Turbocharger | 1 |
141-7047 Muffler
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 14***47 | Muffler | 1 |
| 20***99 | Clip | 1 |
286-0348 Shield Gp-Heat
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
| 28***48 | Shield Group-Heat | 1 |
283-9439 Shield Gp-Heat
| 06***39 | Seal-O-Ring | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
283-9835 Shield Gp-Heat
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
| 13***67 | Base As-Fuel | 1 |
280-7400 Shield Gp-Manifold
| 11***80 | Coupling; (37-Deg) | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
| 27***42 | Hose As | 2 |
335-1847 Shield Gp-Turbocharger
| 28***31 | Pump Group-Fuel Transfer | 1 |
| 33***47 | Shield Group-Turbocharger | 1 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 2 |
357-4262 Shield Gp-Turbocharger
| 33***35 | Pump Group-Fuel Transfer | 1 |
| 35***62 | Shield Group-Turbocharger | 1 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 2 |
278-4176 Shield Gp-Turbocharger
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
283-9836 Shield Gp-Turbocharger
| 09***35 | Spacer; (11x22x5-mm Thk) | 2 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
302-6241 Shield-Heat
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
279-6507 Shutoff Gp-Air -Dual Element
| 22***42 | Gear-Fuel Pump; (16-Teeth) | 1 |
| 27***07 | Shutoff Group-Air; -Dual Element | 1 |
282-4361 Shutoff Gp-Air
| 22***42 | Gear-Fuel Pump; (16-Teeth) | 1 |
| 28***61 | Shutoff Group-Air | 1 |
279-0176 Shutoff Gp-Air
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 27***76 | Shutoff Group-Air; -Single Element | 1 |
| 29***85 | Injector Group-Fuel | 1 |
336-6690 Silencer Gp-Inlet
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 33***90 | Silencer Group-Inlet | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
318-1713 Support Gp-Aftercooler
| 31***13 | Support Group-Aftercooler | 1 |
| 9X***37 | Seal-O-Ring | 1 |
324-6295 Turbocharger Gp
| 32***95 | Turbocharger Group | 1 |
302-1407 Turbocharger Gp
| 27***78 | Converter As-Signal; (Rs232, Rs422, Rs485) | 1 |
| 30***07 | Turbocharger Group | 1 |
297-1024 Turbocharger Gp
| 27***75 | Adapter-Communication; (Modbus) | 1 |
| 29***24 | Turbocharger Group | 1 |
323-6348 Turbocharger Gp
| 03***12 | Screw-Forming; (10-24x0.5-In) | 5 |
| 11***19 | Diode As-Alternator | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
Basic Engine
223-6408 Base Gp-Valve Cover & Inj Harn
| 22***08 | Base Group-Valve Cover & Inj Harn | 1 |
| 30***53 | Camshaft; (Right Bank) | 1 |
| 30***58 | Camshaft; (Left Bank) | 1 |
226-4927 Base Gp-Valve Cover & Inj Harn
| 22***27 | Base Group-Valve Cover & Inj Harn | 1 |
| 33***16 | Block-Rubber | 64 |
| 5N***61 | Compound-Lubrication | 1 |
260-9308 Camshaft Gp
| 24***70 | Coupling-Inner | 1 |
| 25***92 | Coupling-Outer | 1 |
| 26***08 | Camshaft Group | 1 |
279-0182 Coupling Gp-Flexible
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 4 |
302-8352 Coupling Gp-Flexible
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
329-0944 Cover Gp-Access -Engine, Rear
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
252-9882 Cover Gp-Access -Engine-Front
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 5 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
291-0557 Cover Gp-Cylinder Block
| 27***31 | Cover | 1 |
| 29***57 | Cover Group-Cylinder Block | 1 |
| 6V***43 | Locknut; (M6x1-Thd) | 1 |
280-7395 Cover Gp-Engine
| 27***33 | Cover | 1 |
| 28***95 | Cover Group-Engine; -Rear | 1 |
| 6V***43 | Locknut; (M6x1-Thd) | 1 |
290-9985 Cover Gp-Engine Lifting Eye
| 22***35 | Gear-Crankshaft; (99-Teeth) | 1 |
| 22***52 | Crankshaft As | 1 |
| 24***18 | Kit-Crankshaft Bearing | 0 |
275-0030 Cover Gp-Engine Lifting Eye
| 27***30 | Cover Group-Engine Lifting Eye | 1 |
| 28***69 | Bracket | 1 |
| 29***83 | Plate | 1 |
275-0032 Cover Gp-Engine Lifting Eye
| 21***28 | Washer-Isolator | 36 |
| 22***06 | Seal-Valve Cover; (Valve Cover) | 6 |
| 22***07 | Stud; (5/16-18-Thd)(Bolt) | 4 |
239-2252 Cover Gp-Valve Mechanism
| 22***65 | Sleeve | 4 |
| 22***66 | Sleeve | 1 |
| 23***07 | Cap-Crankshaft | 7 |
224-3250 Crankshaft Gp
| 15***09 | Seal-Liner | 12 |
| 15***10 | Seal-Liner | 12 |
| 15***93 | Seal-Liner | 12 |
348-9906 Cylinder Block As
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 24 |
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 20 |
| 12***54 | Bolt-12 Point Head; (3/4-16x8.5-In) | 1 |
348-9904 Cylinder Block As
| 15***23 | Valve; (Inlet) | 12 |
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
230-7181 Cylinder Block As
| 21***28 | Stud; (3/8-16, 1/8-27x3.5-In) | 1 |
| 22***00 | Plate-Spacer | 2 |
| 22***01 | Gasket-Plate | 2 |
324-6139 Cylinder Block As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
349-2859 Cylinder Block Gp
| 14***81 | Spacer; (13.5x25x12-mm Thk) | 12 |
| 14***67 | Stud-Taperlock, Plug,Female | 12 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 12 |
253-9882 Cylinder Block Gp
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 12 |
| 21***99 | Damper As | 1 |
| 25***82 | Cylinder Block Group | 1 |
357-7398 Cylinder Head As
| 10***26 | Dowel | 1 |
| 35***98 | Cylinder Head As | 1 |
| 9X***72 | Bolt-Locking; (3/8-16x0.875-In) | 16 |
284-8895 Cylinder Head Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1F***60 | Washer Roll-Over Group To Deck | 4 |
359-0936 Cylinder Head Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1F***60 | Washer Roll-Over Group To Deck | 4 |
291-6910 Damper & Pulley Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1F***60 | Washer Roll-Over Group To Deck | 4 |
301-6972 Damper & Pulley Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 18***71 | V-Belt Set; -Includes 4-Belts, Fan Drive-Fan Drive | 1 |
234-1579 Damper Gp
| 0S***99 | Stud (1.4325" Long) | 11 |
| 23***79 | Damper Group | 1 |
269-4149 Drive Gp-Fan -Belt
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 26***49 | Drive Group-Fan; -Belt | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 2 |
357-3624 Drive Gp-Fan -Belt
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 5 |
| 26***09 | Guard As-Pulley; (Top) | 1 |
| 26***10 | Guard-Pulley; (Rh) | 1 |
276-5734 Drive Gp-Fan -Belt
| 1N***25 | Bolt-12 Point Head; (5/8-18x6.75-In) | 12 |
| 27***34 | Drive Group-Fan; -Belt | 1 |
| 2W***65 | Flywheel As | 1 |
281-3146 Drive Gp-Fan -Belt
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 6 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
292-7121 Drive Gp-Fan -Belt
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 6 |
| 10***65 | Plate-Thrust | 1 |
| 10***61 | Plate-Thrust; (Camshaft) | 2 |
357-0876 Drive Gp-Fan -Belt
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 6 |
| 26***09 | Guard As-Pulley; (Top) | 1 |
| 26***10 | Guard-Pulley; (Rh) | 1 |
236-8820 Fastener Gp-Front Housing
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 22 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 22***42 | Gasket; (Flywheel Housing) | 1 |
258-4884 Flywheel Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 4 |
| 21***27 | Gasket; (Cylinder Block) | 1 |
| 23***60 | Dowel | 2 |
235-0993 Gear Gp-Front
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 2 |
| 06***39 | Seal-O-Ring | 1 |
224-1213 Gear Gp-Rear
| 22***13 | Gear Group-Rear | 1 |
| 23***50 | Eye As-Lifting | 1 |
| 23***61 | Eye-Lifting | 1 |
274-2007 Guard Gp-Belt
| 27***07 | Guard Group-Belt | 1 |
| 33***62 | Bolt-12 Point Head; (1/2-13x88.9-mm) | 24 |
| 34***43 | Rocker Arm Group; -Valve | 6 |
255-3438 Guard Gp-Belt
| 25***38 | Guard Group-Belt | 1 |
| 32***93 | Rocker Arm Group; -Valve | 6 |
| 33***62 | Bolt-12 Point Head; (1/2-13x88.9-mm) | 24 |
305-7067 Housing Gp-Flywheel
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 12***21 | Support-Alternator | 1 |
| 18***59 | Washer-Hard; (10.5x28.5x5-mm Thk) | 3 |
238-9862 Housing Gp-Front
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 12***21 | Support-Alternator | 1 |
| 18***59 | Washer-Hard; (10.5x28.5x5-mm Thk) | 3 |
350-8861 Housing Gp-Rear
| 23***36 | Mount As | 4 |
| 35***61 | Housing Group-Rear | 1 |
233-2462 Housing Gp-Rear
| 23***62 | Housing Group-Rear | 1 |
| 25***03 | Mounting Group-Vibration Isolator | 4 |
235-2014 Lifting Gp-Engine
| 23***14 | Lifting Group-Engine | 1 |
| 33***73 | Mount As | 4 |
260-9631 Mechanism Gp-Fuel Pump & Valve
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***39 | Plug-Drain; (Engine Oil Pan) | 1 |
256-7170 Mounting Gp-Alternator
| 15***56 | Bolt-Special; (Oil Jet) | 1 |
| 18***50 | Pin-Piston | 1 |
| 18***03 | Ring-Piston; (Intermediate) | 1 |
303-6241 Mounting Gp-Alternator
| 30***41 | Mounting Group-Alternator | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 4 |
| 7W***34 | Plug-Pipe (3/8-18 Nptf Thd) | 4 |
328-7171 Mounting Gp-Engine Flexible
| 32***71 | Mounting Group-Engine Flexible | 1 |
| 3B***45 | Plug Flywheel Housing Turbocharger Drain Hole | 4 |
328-7176 Mounting Gp-Engine Flexible
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
| 32***76 | Mounting Group-Engine Flexible | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 2 |
328-7181 Mounting Gp-Engine Flexible
| 30***52 | Rocker Arm Group; -Unit Injector | 2 |
| 31***85 | Shaft As-Rocker Arm | 1 |
| 32***94 | Rocker Arm Group; -Exhaust | 4 |
328-7177 Mounting Gp-Engine Flexible
| 06***39 | Seal-O-Ring | 1 |
| 19***51 | Button; (24-mm Od) | 1 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 1 |
328-7180 Mounting Gp-Engine Flexible
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
| 27***17 | Nut; (3/8-24-Thd) | 1 |
328-7178 Mounting Gp-Engine Flexible
| 30***52 | Rocker Arm Group; -Unit Injector | 2 |
| 31***85 | Shaft As-Rocker Arm | 1 |
| 32***94 | Rocker Arm Group; -Exhaust | 2 |
328-7179 Mounting Gp-Engine Flexible
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
| 27***17 | Nut; (3/8-24-Thd) | 1 |
332-5672 Mounting Gp-Engine Flexible
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 33***72 | Mounting Group-Engine Flexible | 1 |
261-8339 Pan Gp-Oil
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 26***39 | Pan Group-Oil; -Engine | 1 |
269-6429 Pan Gp-Oil
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 8 |
| 26***29 | Pan Group-Oil; -Engine | 1 |
| 31***53 | Support As | 2 |
357-7154 Piston & Rod Gp
| 2P***04 | Stud-Hollow; (1.5-16x1.339-In) | 2 |
| 35***54 | Piston & Rod Group | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
213-4835 Piston & Rod Gp
| 1B***86 | Bolt-Bracket Assembly To Timing Gear | 8 |
| 21***35 | Piston & Rod Group | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 8 |
282-4895 Plug Gp-Cylinder Block
| 03***12 | Screw-Forming; (10-24x0.5-In) | 6 |
| 23***04 | Filter Element-Breather; (Crankcase) | 1 |
| 23***06 | Plate-Breather | 1 |
223-6407 Plug Gp-Cylinder Head
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 22***07 | Plug Group-Cylinder Head | 1 |
276-4879 Plug Gp-Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 25***82 | Tube As | 1 |
| 27***79 | Plug Group-Engine | 1 |
301-5352 Rocker Arm Gp -Unit Injector
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
| 1R***08 | Filter As-Engine Oil; (Advanced Efficiency)(High Efficiency) | 2 |
320-2793 Rocker Arm Gp -Valve
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
342-6643 Rocker Arm Gp -Valve
| 00***99 | Connector-Flared | 1 |
| 13***52 | Plug-Adapter | 1 |
| 27***68 | Hose As | 1 |
320-2794 Rocker Arm Gp -Exhaust
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
320-2796 Rocker Arm Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
319-0785 Seal Gp-Crankshaft -Rear
| 00***99 | Connector-Flared | 1 |
| 13***52 | Plug-Adapter | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
319-7401 Seal Gp-Crankshaft -Front
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 11***40 | Seal-O-Ring | 2 |
| 12***02 | Seal-Integral | 2 |
343-1685 Support Gp-Brace
| 10***82 | Shaft As-Pump Drive | 1 |
| 10***73 | Shaft As-Idler | 1 |
| 11***79 | Body As-Oil Pump | 1 |
7n-9078 Support Gp-Engine -Front, Wide
| 00***01 | Elbow (To Serial No 1md225) | 1 |
| 10***97 | Valve-Ball | 3 |
| 15***50 | Elbow As | 1 |
Cooling System
293-2970 Fan Gp-Blower
| 13***40 | Locknut; (M8x1.25-Thd) | 182 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 22***56 | Film; (Warning) (Hot Fluid) (Underside Of Door To Radiator Fill) | 1 |
304-1771 Fan Gp-Blower
| 1F***50 | Nut Rops Support | 2 |
| 27***49 | Brace; (Lh) | 1 |
| 27***50 | Brace; (Rh) | 1 |
202-0052 Fan Gp-Blower
| 13***40 | Locknut; (M8x1.25-Thd) | 168 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
256-9937 Fan Gp-Blower
| 24***78 | Clip | 2 |
| 25***37 | Fan Group-Blower | 1 |
| 27***13 | Cooler Group-Fuel | 1 |
269-8462 Guard Gp-Fan
| 22***51 | Washer-Hard; (11x32x5-mm Thk) | 16 |
| 26***26 | Radiator Group | 1 |
| 26***62 | Guard Group-Fan | 3 |
297-4254 Lines Gp-Coolant
| 29***54 | Lines Group-Coolant | 1 |
339-6197 Lines Gp-Coolant
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 12 |
| 12***56 | Clamp-Hose | 3 |
| 20***55 | Adapter | 1 |
261-0653 Lines Gp-Coolant
| 26***53 | Lines Group-Coolant; -Engine | 1 |
357-7384 Lines Gp-Coolant Drain
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 12 |
| 12***56 | Clamp-Hose | 3 |
| 20***55 | Adapter | 1 |
255-5536 Lines Gp-Water
| 20***64 | Cover | 1 |
| 22***79 | Filter Element As-Air; (Primary) | 1 |
| 25***36 | Lines Group-Water; (Engine Oil Clr/Wtr Temp Rgltr) | 1 |
279-3217 Mounting Gp-Radiator
| 27***17 | Mounting Group-Radiator | 1 |
256-3170 Mounting Gp-Radiator
| 20***64 | Cover | 1 |
| 20***66 | Filter Element As-Air; (Secondary) | 1 |
| 22***79 | Filter Element As-Air; (Primary) | 1 |
230-4172 Pump Gp-Water
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 21***45 | Bellows As | 1 |
216-0657 Pump Gp-Water
| 21***57 | Pump Group-Water | 1 |
268-9426 Radiator Gp
| 12***84 | Cap As-Rain; -Exhaust | 1 |
| 14***15 | Gasket | 2 |
| 14***32 | Plate As-Exhaust | 1 |
275-8328 Radiator Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
| 27***28 | Radiator Group | 1 |
| 3V***08 | Washer-Hard; (10.2x20.5x2.5-mm Thk)(Shield To Head) | 16 |
271-4311 Radiator Gp
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 12 |
| 1B***57 | Nut-Full; 19.05mm(.75in)O.D. | 12 |
255-3436 Radiator Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 24***12 | Gasket; (Exhaust) | 1 |
| 25***36 | Radiator Group | 1 |
275-8329 Radiator Gp
| 27***29 | Radiator Group | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
| 5L***33 | Fitting (To Air Cleaner) | 2 |
295-8562 Radiator Gp
| 13***94 | Elbow As | 2 |
| 22***73 | Air Cleaner Group | 2 |
| 23***35 | Clamp | 2 |
329-7324 Radiator Gp
| 12***29 | Clamp; (V-Band) | 2 |
| 12***00 | Adapter | 1 |
| 21***88 | Hose | 8 |
275-6410 Support As-Radiator -Lh
| 13***94 | Elbow As | 2 |
| 22***74 | Air Cleaner Group | 2 |
| 23***35 | Clamp | 2 |
275-6411 Support As-Radiator -Rh
| 12***29 | Clamp; (V-Band) | 2 |
| 12***00 | Adapter | 1 |
| 21***88 | Hose | 8 |
Electrical And Starting System
274-1979 Adapter Gp-Communication
| 13***08 | Bracket-Mounting | 2 |
| 24***87 | Bar-Bus; (Medium Voltage) | 1 |
| 24***94 | Support-Bus; (Insulator) | 1 |
270-0476 Adapter Gp-Communication -Modbus
| 13***08 | Bracket-Mounting | 2 |
| 24***86 | Bar-Bus; (Medium Voltage) | 1 |
| 24***94 | Support-Bus; (Insulator) | 1 |
5n-5692 Alternator Gp-Charging
| 25***58 | Plate | 8 |
| 27***38 | Bracket | 4 |
| 5N***92 | Alternator Group-Charging; Alternator Gp (See Page 25) | 1 |
7c-3874 Battery Charger
| 27***38 | Bracket | 3 |
| 27***79 | Plate | 6 |
| 7C***74 | Battery Charger; Battery Charger-24 Volt, Dc With Failure | 1 |
7w-0408 Battery Charger
| 25***19 | Plate | 1 |
| 25***20 | Plate | 1 |
| 25***22 | Plate | 1 |
295-8951 Battery Gp
| 27***38 | Bracket | 3 |
| 27***71 | Plate | 1 |
| 27***72 | Plate | 1 |
295-6925 Battery Gp
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 12 |
| 27***38 | Bracket | 3 |
| 27***16 | Plate | 3 |
9x-9730 Battery Gp -Dry
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 24 |
| 27***38 | Bracket | 6 |
| 27***24 | Plate | 6 |
7l-7871 Battery Gp
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 16 |
| 27***38 | Bracket | 4 |
| 27***16 | Plate | 4 |
7l-7872 Battery Gp
| 25***19 | Plate | 1 |
| 25***20 | Plate | 1 |
| 25***22 | Plate | 1 |
244-9639 Block As-Terminal -Load Share
| 15***75 | Ladder Clip | 6 |
| 24***39 | Block As-Terminal; -Load Share | 1 |
| 24***61 | Bracket | 8 |
244-9608 Block As-Terminal -Discrete Input/Output
| 24***08 | Block As-Terminal; -Discrete Input/Output | 1 |
| 27***38 | Bracket | 4 |
| 27***71 | Plate | 1 |
272-8238 Block As-Terminal -Annunciator
| 15***75 | Ladder Clip | 4 |
| 24***60 | Support-Bus | 1 |
| 24***61 | Bracket | 8 |
235-6333 Board As-Circuit -Electro Magnetic Interference
| 15***75 | Ladder Clip | 4 |
| 23***33 | Board As-Circuit; -Electro Magnetic Interference | 1 |
| 24***60 | Support-Bus | 1 |
351-9803 Box As-Control
| 15***75 | Ladder Clip | 6 |
| 24***61 | Bracket | 8 |
| 24***62 | Bracket | 2 |
244-9681 Box As-Extension -Side Shroud
| 15***75 | Ladder Clip | 4 |
| 24***60 | Support-Bus | 1 |
| 24***61 | Bracket | 8 |
252-7366 Box As-Extension -Rear Shroud
| 15***75 | Ladder Clip | 6 |
| 24***61 | Bracket | 8 |
| 24***62 | Bracket | 2 |
259-0150 Box As-Extension -Side Shroud
| 15***75 | Ladder Clip | 6 |
| 24***61 | Bracket | 8 |
| 24***62 | Bracket | 2 |
300-3508 Box Gp-Control -Jacket Water Heater
| 15***75 | Ladder Clip | 4 |
| 24***60 | Support-Bus | 1 |
| 24***61 | Bracket | 8 |
281-3958 Box Gp-Electronic
| 24***77 | Bus Bar Group; -Side Extension, Iec | 1 |
| 28***58 | Box Group-Electronic | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 8 |
263-1744 Box Gp-Electronic
| 24***80 | Bus Bar Group; -Rear Extension, Nema | 1 |
| 26***44 | Box Group-Electronic | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
245-0002 Box Gp-Extension Terminal -Rear
| 13***89 | Clip; (Ladder) | 6 |
| 15***75 | Ladder Clip | 4 |
| 24***83 | Bracket; (Rh)(Rh) | 1 |
245-0003 Box Gp-Extension Terminal -Side
| 13***89 | Clip; (Ladder) | 6 |
| 15***75 | Ladder Clip | 4 |
| 24***83 | Bracket; (Rh)(Rh) | 1 |
245-0037 Box Gp-Extension Terminal -Optional
| 24***37 | Box Group-Extension Terminal; -Optional | 1 |
| 27***70 | Bus Bar As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
272-8414 Bus Bar As
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 16 |
| 25***72 | Plate | 2 |
| 25***81 | Support | 2 |
252-7567 Bus Bar As
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 24 |
| 25***81 | Support | 2 |
| 25***67 | Bus Bar As | 1 |
272-8431 Bus Bar As
| 25***81 | Support | 2 |
| 25***09 | Plate | 2 |
| 25***23 | Plate | 3 |
276-5974 Bus Bar As
| 25***04 | Plate | 2 |
| 25***56 | Plate | 1 |
| 27***38 | Bracket | 1 |
252-7661 Bus Bar As
| 25***13 | Bus Bar As | 2 |
| 25***61 | Bus Bar As | 1 |
244-9690 Bus Bar As -Lower
| 24***90 | Bus Bar As; -Lower | 1 |
| 27***84 | Bus Bar As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
244-9691 Bus Bar As
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 24 |
| 24***91 | Bus Bar As | 1 |
| 25***72 | Plate | 2 |
276-5978 Bus Bar As
| 27***14 | Bus Bar As | 2 |
| 27***78 | Bus Bar As | 1 |
244-9689 Bus Bar As
| 24***89 | Bus Bar As | 1 |
| 27***82 | Bus Bar As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
252-7605 Bus Bar As
| 25***81 | Support | 2 |
| 25***05 | Bus Bar As | 1 |
| 25***07 | Plate | 2 |
252-7611 Bus Bar As
| 25***81 | Support | 2 |
| 25***07 | Plate | 2 |
| 25***11 | Bus Bar As | 3 |
252-7463 Bus Bar As
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 16 |
| 25***63 | Bus Bar As | 1 |
| 25***81 | Support | 2 |
244-9688 Bus Bar As -Upper
| 24***88 | Bus Bar As; -Upper | 1 |
| 27***71 | Bus Bar As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
252-7613 Bus Bar As
| 25***81 | Support | 2 |
| 25***09 | Plate | 2 |
| 25***11 | Bus Bar As | 2 |
244-9678 Bus Bar Gp -Rear Extension, Iec
| 24***78 | Bus Bar Group; -Rear Extension, Iec | 1 |
| 27***38 | Bracket | 2 |
| 27***93 | Bar-Bus | 1 |
245-0079 Bus Bar Gp -Side Extension, Nema
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 24 |
| 24***79 | Bus Bar Group; -Side Extension, Nema | 1 |
| 25***72 | Plate | 2 |
244-9680 Bus Bar Gp -Rear Extension, Nema
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 16 |
| 24***80 | Bus Bar Group; -Rear Extension, Nema | 1 |
| 25***81 | Support | 2 |
244-9677 Bus Bar Gp -Side Extension, Iec
| 24***77 | Bus Bar Group; -Side Extension, Iec | 1 |
| 27***31 | Bus Bar As | 2 |
252-7413 Bus Bar Gp-Box -Side Extension, Iec
| 25***13 | Bus Bar Group-Box; -Side Extension, Iec | 1 |
| 27***38 | Bracket | 2 |
| 27***93 | Bar-Bus | 1 |
278-8383 Bus Bar Gp-Box -Side Extension, Iec
| 11***03 | Bolt; (M6x1x55-mm) | 8 |
| 25***28 | Insulator | 8 |
| 27***83 | Bus Bar Group-Box; -Side Extension, Iec | 1 |
252-7412 Bus Bar Gp-Box -Side Extension
| 25***12 | Bus Bar Group-Box; -Side Extension, Nema | 1 |
| 25***81 | Support | 2 |
| 25***07 | Plate | 2 |
278-4972 Bus Bar Gp-Box -Rear Extension, Nema
| 11***03 | Bolt; (M6x1x55-mm) | 8 |
| 25***28 | Insulator | 6 |
| 27***72 | Bus Bar Group-Box; -Rear Extension, Nema | 1 |
278-4973 Bus Bar Gp-Box -Side Extension, Nema
| 27***73 | Bus Bar Group-Box; -Side Extension, Nema | 1 |
| 27***28 | Bracket | 4 |
| 27***29 | Bar-Bus | 4 |
252-7343 Bus Bar Gp-Box -Side Extension, Nema
| 25***43 | Bus Bar Group-Box; -Side Extension, Nema | 1 |
| 25***81 | Support | 2 |
| 25***09 | Plate | 2 |
245-0093 Bus Bar Gp-Box -Rear Extension, Nema
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 24 |
| 24***93 | Bus Bar Group-Box; -Rear Extension, Nema | 1 |
| 25***81 | Support | 2 |
278-8385 Bus Bar Gp-Box -Rear Extension, Iec
| 27***85 | Bus Bar Group-Box; -Rear Extension, Iec | 1 |
| 27***28 | Bracket | 4 |
| 27***36 | Bar-Bus; (Customer Connection) | 4 |
245-0094 Bus Bar Gp-Box -Rear Extension, Iec
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 16 |
| 24***94 | Bus Bar Group-Box; -Rear Extension, Iec | 1 |
| 25***72 | Plate | 2 |
252-7344 Bus Bar Gp-Box -Side Extension, Iec
| 25***44 | Bus Bar Group-Box; -Side Extension, Iec | 1 |
| 25***81 | Support | 2 |
| 25***07 | Plate | 2 |
252-7657 Bus Bar Gp-Circuit Breaker -Rear Extension
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 25***57 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 31***05 | Cable; (00-Ga, Black)(200-cm) | 0 |
252-7518 Bus Bar Gp-Circuit Breaker -Side Extension
| 25***18 | Bus Bar Group-Circuit Breaker; -Side Extension | 1 |
| 27***28 | Bracket | 4 |
| 28***37 | Bar-Bus; (Customer Connection) | 4 |
276-5975 Bus Bar Gp-Circuit Breaker -Side Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
274-7196 Bus Bar Gp-Circuit Breaker -Side Extension
| 16***55 | Terminal | 2 |
| 24***26 | Kit-Bolt; (Breaker) | 1 |
| 24***50 | Harness As-Wiring; (Circuit Breaker)(8-Pin) | 1 |
252-7603 Bus Bar Gp-Circuit Breaker -Rear Extension
| 25***03 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 27***36 | Bar-Bus; (Customer Connection) | 4 |
| 29***73 | Bracket | 3 |
252-7608 Bus Bar Gp-Circuit Breaker -Side Extension
| 25***08 | Bus Bar Group-Circuit Breaker; -Side Extension | 1 |
| 28***37 | Bar-Bus; (Customer Connection) | 4 |
| 29***73 | Bracket | 3 |
252-7473 Bus Bar Gp-Circuit Breaker -Rear Extension
| 11***03 | Bolt; (M6x1x55-mm) | 8 |
| 25***73 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 25***28 | Insulator | 8 |
276-5976 Bus Bar Gp-Circuit Breaker -Rear Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
252-7621 Bus Bar Gp-Circuit Breaker -Side Extension
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 25***21 | Bus Bar Group-Circuit Breaker; -Side Extension | 1 |
| 31***05 | Cable; (00-Ga, Black)(200-cm) | 0 |
252-7614 Bus Bar Gp-Circuit Breaker -Rear Extension
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 25***14 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 31***05 | Cable; (00-Ga, Black)(200-cm) | 0 |
276-5968 Bus Bar Gp-Circuit Breaker -Rear Extension
| 24***26 | Kit-Bolt; (Breaker) | 1 |
| 24***50 | Harness As-Wiring; (Circuit Breaker)(8-Pin) | 1 |
| 24***24 | Switch-Auxiliary; (Single Pole, Dual Throw) | 1 |
276-5969 Bus Bar Gp-Circuit Breaker -Side Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
252-7598 Bus Bar Gp-Circuit Breaker -Side Extension
| 25***98 | Bus Bar Group-Circuit Breaker; -Side Extension | 1 |
| 31***64 | Bracket | 4 |
| 31***65 | Plate | 1 |
276-5979 Bus Bar Gp-Circuit Breaker -Side Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
252-7610 Bus Bar Gp-Circuit Breaker -Rear Extension
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 25***10 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 31***05 | Cable; (00-Ga, Black)(200-cm) | 0 |
276-5980 Bus Bar Gp-Circuit Breaker -Rear Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
276-5984 Bus Bar Gp-Circuit Breaker -Side Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
272-8430 Bus Bar Gp-Circuit Breaker -Rear Extension
| 18***99 | Terminal-Ring | 1 |
| 19***42 | Cable As | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
252-7606 Bus Bar Gp-Circuit Breaker -Rear Extension
| 25***06 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 27***29 | Bar-Bus | 4 |
| 29***73 | Bracket | 3 |
272-8413 Bus Bar Gp-Circuit Breaker -Rear Extension
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 27***13 | Bus Bar Group-Circuit Breaker; -Rear Extension | 1 |
| 31***05 | Cable; (00-Ga, Black)(200-cm) | 0 |
276-5967 Bus Bar Gp-Circuit Breaker -Side Extension
| 16***55 | Terminal | 2 |
| 24***26 | Kit-Bolt; (Breaker) | 1 |
| 24***50 | Harness As-Wiring; (Circuit Breaker)(8-Pin) | 1 |
276-5982 Bus Bar Gp-Circuit Breaker -Side Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
276-5970 Bus Bar Gp-Circuit Breaker -Rear Extension
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
278-7692 Bus Bar Gp-Generator -Bracket
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
282-4038 Bus Bar Gp-Generator -Generator Bracket, Iec
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
279-2282 Bus Bar Gp-Generator -Bracket, Nema
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
311-7115 Bus Bar Gp-Generator -Nema
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
279-2280 Bus Bar Gp-Generator -Generator Bracket, Nema
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
282-4040 Bus Bar Gp-Generator -Generator Bracket, Iec
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
278-7694 Bus Bar Gp-Generator -Generator Bracket
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
311-0272 Bus Bar Gp-Generator -Bracket
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
311-7116 Bus Bar Gp-Generator
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
311-7117 Bus Bar Gp-Generator -Generator Bracket, Iec
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
252-7659 Cable As
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
277-0326 Cable As
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
252-7601 Cable As
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***31 | Trip Unit | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
252-7602 Cable As
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
252-7565 Cable As
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 8 |
279-0735 Cable Gp-Battery
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***31 | Trip Unit | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
244-9889 Circuit Breaker As -Iec, Iccb, Lsig-P
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
244-9907 Circuit Breaker As -Iec, Iccb, Lsi
| 24***07 | Circuit Breaker As; -Iec, Iccb, Lsi | 1 |
| 27***55 | Control Group-Engine Electronic | 1 |
244-9888 Circuit Breaker As -Iec, Iccb, Lsig
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***27 | Fastener Group; (Bus Bar Box) | 6 |
244-9704 Circuit Breaker As -Ul, Mccb, Lsi
| 24***04 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
244-9869 Circuit Breaker As -Iec, Mccb, Lsig
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9984 Circuit Breaker As -Ul, Mccb, Lsi-P
| 24***31 | Seal; (13.25-Dm Each) | 0 |
| 24***84 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi-P | 1 |
| 25***51 | Cover As | 1 |
244-9804 Circuit Breaker As -Iec, Mccb, Lsi
| 24***04 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9787 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***87 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***37 | Trip Unit | 1 |
244-9896 Circuit Breaker As -Iec, Iccb, Lsig-P
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***96 | Circuit Breaker As; -Iec, Iccb, Lsig-P | 1 |
244-9881 Circuit Breaker As -Ul, Iccb, Lsig
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***81 | Circuit Breaker As; -Ul, Iccb, Lsig | 1 |
244-9884 Circuit Breaker As -Iec, Iccb, Lsi
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9864 Circuit Breaker As -Ul, Mccb, Lsi
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***64 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi | 1 |
244-9997 Circuit Breaker As -Ul, Iccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
244-9880 Circuit Breaker As -Ul, Iccb, Lsi
| 24***37 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***80 | Circuit Breaker As; -Ul, Iccb, Lsi | 1 |
244-9991 Circuit Breaker As -Ul, Mccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 4 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
| 24***91 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi-P | 1 |
244-9910 Circuit Breaker As -Ul, Iccb, Lsi
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 24***10 | Circuit Breaker As; -Ul, Iccb, Lsi | 1 |
244-9996 Circuit Breaker As -Ul, Iccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 16 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
244-9775 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***75 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***31 | Trip Unit | 1 |
244-9821 Circuit Breaker As -Iec, Mccb, Lsig
| 24***21 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9893 Circuit Breaker As -Ul, Iccb, Lsig-P
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***93 | Circuit Breaker As; -Ul, Iccb, Lsig-P | 1 |
244-9791 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***91 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9905 Circuit Breaker As -Iec, Iccb, Lsig
| 22***16 | Spacer; (5/16-18x1.75-In) | 4 |
| 22***09 | Bracket | 1 |
| 23***93 | Bolt-Flange Head; (M6x1x35-mm) | 1 |
244-9995 Circuit Breaker As -Ul, Mccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 16 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
244-9767 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***67 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
244-9911 Circuit Breaker As -Ul, Iccb, Lsig
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 24***11 | Circuit Breaker As; -Ul, Iccb, Lsig | 1 |
244-9903 Circuit Breaker As -Ul, Iccb, Lsig-P
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 24 |
| 24***03 | Circuit Breaker As; -Ul, Iccb, Lsig-P | 1 |
| 3E***67 | Ring-Retaining | 1 |
244-9793 Circuit Breaker As -Iec, Mccb, Lsig
| 24***93 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9823 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***23 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9920 Circuit Breaker As -Ul, Mccb, Lsig
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 6 |
| 24***81 | Box As-Extension; -Side Shroud | 1 |
| 24***20 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig | 1 |
244-9904 Circuit Breaker As -Iec, Iccb, Lsi
| 24***04 | Circuit Breaker As; -Iec, Iccb, Lsi | 1 |
244-9816 Circuit Breaker As -Iec, Mccb, Lsi
| 24***16 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9794 Circuit Breaker As -Ul, Mccb, Lsi
| 24***94 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9812 Circuit Breaker As -Iec, Mccb, Lsi
| 24***12 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9772 Circuit Breaker As -Iec, Mccb, Lsi
| 24***72 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
244-9886 Circuit Breaker As -Iec, Iccb, Lsig-P
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***45 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
244-9913 Circuit Breaker As -Ul, Iccb, Lsig-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
244-9873 Circuit Breaker As -Ul, Iccb, Lsig-P
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9894 Circuit Breaker As -Iec, Iccb, Lsi
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***94 | Circuit Breaker As; -Iec, Iccb, Lsi | 1 |
244-9874 Circuit Breaker As -Iec, Iccb, Lsi
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***74 | Circuit Breaker As; -Iec, Iccb, Lsi | 1 |
244-9819 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***19 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***37 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9919 Circuit Breaker As -Ul, Mccb, Lsi
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 4 |
| 24***38 | Roof; (Rear) | 1 |
| 24***19 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi | 1 |
244-9871 Circuit Breaker As -Ul, Iccb, Lsig
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***71 | Circuit Breaker As; -Ul, Iccb, Lsig | 1 |
244-9807 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***07 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9898 Circuit Breaker As -Iec, Iccb, Lsig
| 24***98 | Circuit Breaker As; -Iec, Iccb, Lsig | 1 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
| 8F***34 | Lockwasher; (External Teeth) | 2 |
244-9899 Circuit Breaker As -Iec, Iccb, Lsig-P
| 10***38 | End-Wire; (16-Ga) | 4 |
| 24***99 | Circuit Breaker As; -Iec, Iccb, Lsig-P | 1 |
| 25***52 | Conduit; (1430-cm) | 0 |
244-9706 Circuit Breaker As -Ul, Mccb, Lsig
| 24***06 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig | 1 |
| 24***30 | Kit-Bolt; (Circuit Breaker) | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
244-9879 Circuit Breaker As -Iec, Iccb, Lsig-P
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9865 Circuit Breaker As -Ul, Mccb, Lsig
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9877 Circuit Breaker As -Iec, Iccb, Lsi
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***77 | Circuit Breaker As; -Iec, Iccb, Lsi | 1 |
244-9764 Circuit Breaker As -Iec, Mccb, Lsi
| 24***64 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***31 | Trip Unit | 1 |
244-9878 Circuit Breaker As -Iec, Iccb, Lsig
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***78 | Circuit Breaker As; -Iec, Iccb, Lsig | 1 |
244-9770 Circuit Breaker As -Ul, Mccb, Lsig-P
| 24***70 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***31 | Trip Unit | 1 |
244-9867 Circuit Breaker As -Ul, Mccb, Lsig-P
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***67 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig-P | 1 |
244-9817 Circuit Breaker As -Iec, Mccb, Lsig
| 24***17 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9918 Circuit Breaker As -Ul, Mccb, Lsig-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 4 |
| 24***40 | Roof; (Side) | 1 |
| 24***18 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig-P | 1 |
244-9803 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***03 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***37 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9801 Circuit Breaker As -Iec, Mccb, Lsig
| 24***01 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9890 Circuit Breaker As -Ul, Iccb, Lsi
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
244-9887 Circuit Breaker As -Iec, Iccb, Lsi
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9792 Circuit Breaker As -Iec, Mccb, Lsi
| 24***92 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9710 Circuit Breaker As -Iec, Mccb, Lsig
| 24***10 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
244-9773 Circuit Breaker As -Iec, Mccb, Lsig
| 24***73 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
244-9876 Circuit Breaker As -Iec, Iccb, Lsig-P
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9897 Circuit Breaker As -Iec, Iccb, Lsi
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***97 | Circuit Breaker As; -Iec, Iccb, Lsi | 1 |
244-9800 Circuit Breaker As -Iec, Mccb, Lsi
| 24***00 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9742 Circuit Breaker As -Ul, Mccb, Lsi
| 24***42 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***31 | Trip Unit | 1 |
244-9805 Circuit Breaker As -Iec, Mccb, Lsig
| 24***05 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9999 Circuit Breaker As -Ul, Iccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
244-9883 Circuit Breaker As -Ul, Iccb, Lsig-P
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9789 Circuit Breaker As -Iec, Mccb, Lsig
| 24***89 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***37 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9802 Circuit Breaker As -Ul, Mccb, Lsig
| 24***02 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9993 Circuit Breaker As -Ul, Mccb, Lsi-P
| 24***93 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi-P | 1 |
| 29***98 | Plate-Cover; (Medium Voltage, Separator Side) | 1 |
| 3E***00 | Seal; (13.5-cm Each) | 0 |
244-9868 Circuit Breaker As -Ul, Mccb, Lsi
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***68 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsi | 1 |
244-9785 Circuit Breaker As -Iec, Mccb, Lsig
| 24***85 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
244-9820 Circuit Breaker As -Iec, Mccb, Lsi
| 24***20 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9765 Circuit Breaker As -Iec, Mccb, Lsig
| 24***65 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
244-9777 Circuit Breaker As -Iec, Mccb, Lsig
| 24***77 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
244-9998 Circuit Breaker As -Ul, Iccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
244-9784 Circuit Breaker As -Iec, Mccb, Lsi
| 24***84 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
244-9908 Circuit Breaker As -Iec, Iccb, Lsig
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***38 | End-Wire; (16-Ga) | 3 |
244-9875 Circuit Breaker As -Iec, Iccb, Lsig
| 24***33 | Trip Unit; (4-Pin) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***75 | Circuit Breaker As; -Iec, Iccb, Lsig | 1 |
244-9746 Circuit Breaker As -Ul, Mccb, Lsig
| 24***46 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
244-9815 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***15 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***31 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
244-9776 Circuit Breaker As -Iec, Mccb, Lsi
| 24***76 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
244-9891 Circuit Breaker As -Ul, Iccb, Lsig
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
244-9901 Circuit Breaker As -Ul, Iccb, Lsig
| 24***01 | Circuit Breaker As; -Ul, Iccb, Lsig | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 3 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 3 |
244-9909 Circuit Breaker As -Iec, Iccb, Lsig-P
| 24***09 | Circuit Breaker As; -Iec, Iccb, Lsig-P | 1 |
| 3K***06 | Screw-Machine-Relay To Bracket | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
244-9779 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***79 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***37 | Trip Unit | 1 |
244-9895 Circuit Breaker As -Iec, Iccb, Lsig
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***95 | Circuit Breaker As; -Iec, Iccb, Lsig | 1 |
244-9788 Circuit Breaker As -Iec, Mccb, Lsi
| 24***88 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
244-9906 Circuit Breaker As -Iec, Iccb, Lsig-P
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 8 |
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 8 |
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
244-9795 Circuit Breaker As -Iec, Mccb, Lsig-P
| 24***95 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig-P | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
244-9885 Circuit Breaker As -Iec, Iccb, Lsig
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***37 | Trip Unit | 1 |
| 24***41 | Harness As-Wiring; (Circuit Breaker)(4-Pin) | 1 |
244-9900 Circuit Breaker As -Ul, Iccb, Lsi
| 24***00 | Circuit Breaker As; -Ul, Iccb, Lsi | 1 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 1 |
244-9744 Circuit Breaker As -Iec, Mccb, Lsi
| 24***44 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsi | 1 |
| 24***25 | Switch-Auxiliary; (Single Pole, Dual Throw)(Circuit Breaker Posn Indicator) | 1 |
| 24***33 | Trip Unit; (4-Pin) | 1 |
252-7378 Circuit Breaker As -Ul, Iccb, Lsi-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 6 |
| 25***78 | Circuit Breaker As; -Ul, Iccb, Lsi-P | 1 |
| 25***50 | Box As-Extension; -Side Shroud | 1 |
244-9870 Circuit Breaker As -Ul, Iccb, Lsi
| 24***37 | Trip Unit | 1 |
| 24***58 | Shunt-Trip | 1 |
| 24***70 | Circuit Breaker As; -Ul, Iccb, Lsi | 1 |
244-9922 Circuit Breaker As -Ul, Mccb, Lsig-P
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 10 |
| 24***22 | Circuit Breaker As; -Ul, Molded Case Circuit Breaker, Lsig-P | 1 |
| 25***66 | Box As-Extension; -Rear Shroud | 1 |
244-9813 Circuit Breaker As -Iec, Mccb, Lsig
| 24***13 | Circuit Breaker As; -Iec, Molded Case Circuit Breaker, Lsig | 1 |
| 24***34 | Module; (Modbus Communication) | 1 |
| 24***35 | Trip Unit | 1 |
6t-3645 Circuit Breaker Gp
| 16***82 | Seal | 1 |
| 21***16 | Screw-Pan Head; (8-16x0.5-In) | 4 |
| 30***63 | Kit-Cover | 1 |
354-2745 Conduit Gp-Electrical
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 26 |
| 29***52 | Mounting-Cable Tie | 13 |
| 35***45 | Conduit Group-Electrical | 1 |
358-0799 Conduit Gp-Electrical
| 15***75 | Ladder Clip | 13 |
| 35***99 | Conduit Group-Electrical | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
275-9900 Conduit Gp-Electrical -Jacket Water Heater
| 16***82 | Seal | 1 |
| 21***16 | Screw-Pan Head; (8-16x0.5-In) | 4 |
| 27***00 | Conduit Group-Electrical; -Jacket Water Heater | 1 |
273-5807 Connection Gp-Electrical
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 27***07 | Connection Group-Electrical | 1 |
| 30***67 | Cable As | 2 |
239-1466 Connection Gp-Electrical -Battery Charger
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 23***66 | Connection Group-Electrical; -Battery Charger | 1 |
| 30***67 | Cable As | 2 |
249-7649 Connector As -Resistive Temperature Device
| 12***84 | Tube-Heat Shrink; (3.2-mm Dia)(6.5-cm Each) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***58 | Cable-Electrical; (16-Ga)(3089-cm) | 0 |
244-9855 Contact As-Electrical -Circuit Breaker Contact Module
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
243-1554 Control & Mtg Gp-Engine Elek
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 24***54 | Control & Mtg Group-Engine Elek | 1 |
| 9X***72 | Strap-Cable | 3 |
344-0389 Control & Mtg Gp-Engine Elek
| 00***99 | Connector-Flared | 2 |
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 11***36 | Valve As-Shutoff; (Jacket Water Heater) | 2 |
252-7504 Control Gp-Electronic -Annunciator
| 00***99 | Connector-Flared | 2 |
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 11***36 | Valve As-Shutoff; (Jacket Water Heater) | 2 |
239-7902 Control Gp-Unprogrammed
| 14***85 | Pump; (Circulation) | 1 |
| 19***43 | Kit-Clamp; (Jacket Water Heater) | 1 |
| 23***02 | Control Group-Unprogrammed | 1 |
245-0081 Control Gp-Voltage
| 19***43 | Kit-Clamp; (Jacket Water Heater) | 1 |
| 24***81 | Control Group-Voltage | 1 |
| 27***67 | Bracket | 1 |
9x-9591 Converter Gp-Electrical
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***69 | Terminal-Blade; (14-Ga To 16-Ga) | 2 |
| 26***26 | Harness As-Lighting | 1 |
252-7646 Cover Gp-Circuit Breaker
| 10***38 | End-Wire; (16-Ga) | 7 |
| 11***14 | End-Wire; (18-Ga) | 8 |
| 17***86 | Block-Terminal; (600-Volt, 20-Ampere) | 3 |
252-7643 Cover Gp-Circuit Breaker
| 08***97 | Washer; (13x50x6-mm Thk) | 4 |
| 24***72 | Support As; (Rh) | 1 |
| 24***73 | Support As; (Lh) | 1 |
245-0096 Cover Gp-Extension Box -Bottom
| 24***96 | Cover Group-Extension Box; -Bottom; Side | 1 |
| 25***89 | Support | 2 |
| 29***54 | Support | 1 |
259-0151 Cover Gp-Extension Box -Side Shroud
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***65 | Harness As-Sensor; (Coolant Level) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
245-0029 Cover Gp-Extension Box -Rear Shroud
| 24***29 | Cover Group-Extension Box; -Rear Shroud | 1 |
| 25***92 | Support | 2 |
| 29***54 | Support | 1 |
252-7407 Cover Gp-Extension Box -Side
| 25***07 | Cover Group-Extension Box; -Side | 1 |
| 25***51 | Support | 1 |
| 25***86 | Support | 1 |
245-0097 Cover Gp-Extension Box -Bottom
| 24***97 | Cover Group-Extension Box; -Bottom, Rear | 1 |
| 25***50 | Support | 1 |
| 25***93 | Support | 2 |
252-7477 Cover Gp-Extension Box -Side
| 25***77 | Cover Group-Extension Box; -Side | 1 |
| 4F***11 | Plug 3.5 cm(1.37 In.) Hole; Plug-- To Support Assembly | 1 |
245-0026 Cover Gp-Extension Box -Top
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***38 | End-Wire; (16-Ga) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
245-0025 Cover Gp-Extension Box -Top
| 24***25 | Cover Group-Extension Box; -Side, Top | 1 |
| 25***57 | Strip Group-Terminal; -Load Share | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
245-0019 Cover Gp-Extension Box -Side
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 10 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 10 |
| 24***19 | Cover Group-Extension Box; -Side | 1 |
252-7491 Cover Gp-Extension Box -Side
| 10***38 | End-Wire; (16-Ga) | 2 |
| 25***91 | Cover Group-Extension Box; -Side | 1 |
| 29***41 | Bracket | 1 |
252-7470 Cover Gp-Extension Box -Rear
| 25***70 | Cover Group-Extension Box; -Rear | 1 |
| 25***16 | Support | 2 |
| 25***18 | Support | 1 |
245-0028 Cover Gp-Extension Box -Side Shroud
| 24***28 | Cover Group-Extension Box; -Side Shroud | 1 |
| 28***61 | Plate-Protection | 10 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 16 |
252-7468 Cover Gp-Extension Box -Rear
| 25***68 | Cover Group-Extension Box; -Rear | 1 |
| 25***92 | Support | 2 |
| 29***56 | Support | 1 |
252-7485 Cover Gp-Extension Box -Side
| 25***85 | Cover Group-Extension Box; -Side | 1 |
| 5P***35 | Plug-Button | 2 |
307-3276 Element Gp-Jacket Water Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 30***76 | Line, Pipe; Suction, Element Group-Jacket Water Heater, Line | 1 |
307-3275 Element Gp-Jacket Water Heater
| 12***35 | Plug-Felt; (Unit Injector Hydraulic Pump) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 1 |
252-7409 Fastener Gp-Wiring Harness -Low Voltage
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 25***09 | Fastener Group-Wiring Harness; -Low Voltage | 1 |
252-7410 Fastener Gp-Wiring Harness -Medium Voltage
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 25***10 | Fastener Group-Wiring Harness; -Medium Voltage | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
308-8368 Ground Gp-Electrical -Rear
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
| 30***68 | Ground Group-Electrical; -Rear | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
308-8369 Ground Gp-Electrical -Side
| 27***17 | Sensor-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 30***69 | Ground Group-Electrical; -Side | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
263-1738 Harness As-Control
| 26***38 | Harness As-Control | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
267-8461 Harness As-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***49 | Strap; (Marker) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
252-7692 Harness As-Switch -Emergency Stop
| 20***15 | Sensor Group-Speed; -Low Output | 1 |
| 22***47 | Seal-O-Ring | 1 |
| 25***92 | Harness As-Switch; -Emergency Stop | 1 |
307-3266 Heater Gp-Jacket Water
| 27***87 | Sensor-Temperature; (Generator Bearing) | 2 |
| 27***88 | Kit-Wiring; -Bearing Temperature Sensor | 1 |
| 30***66 | Heater Group-Jacket Water | 1 |
307-3267 Heater Gp-Jacket Water
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 30***67 | Heater Group-Jacket Water | 1 |
292-2541 Heater Gp-Jacket Water
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 29***41 | Heater Group-Jacket Water | 1 |
292-2540 Heater Gp-Jacket Water
| 20***16 | Sensor Group-Speed; -Torque Converter Output | 1 |
| 22***47 | Seal-O-Ring | 1 |
| 29***40 | Heater Group-Jacket Water | 1 |
172-9973 Lamp Gp-Flood -24-Volt, 65-Watt
| 13***45 | Pad; (Connector) | 1 |
| 17***73 | Lamp Group-Flood; -24-Volt, 65-Watt-Generator Enclosure | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
358-0800 Lighting Gp-Flood
| 35***00 | Lighting Group-Flood | 1 |
269-7022 Lighting Gp-Generator -Panel Lights
| 26***22 | Lighting Group-Generator; -Panel Lights | 1 |
| 27***88 | Kit-Wiring; -Bearing Temperature Sensor | 1 |
| 32***60 | Sensor-Temperature; (Bearing) | 2 |
252-7350 Mounting Gp-Box -Rear
| 1F***50 | Nut Rops Support | 2 |
| 23***37 | Fitting As | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 5 |
279-0867 Mounting Gp-Electronic Control -Pointguard
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
252-7367 Mounting Gp-Panel -Interface Module
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
252-7361 Mounting Gp-Terminal Strip -Load Share
| 17***43 | Bolt-12 Point Head; (5/8-11x1.75-In) | 3 |
| 23***62 | Starting Motor Group-Electric | 1 |
| 25***61 | Mounting Group-Terminal Strip; -Medium Voltage | 1 |
269-7011 Mounting Gp-Transformer
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
252-7374 Mounting Gp-Transformer -Potential
| 25***74 | Mounting Group-Transformer; -Potential | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
| 6V***85 | Starting Motor Group-Electric; -Cold Weather | 1 |
252-7476 Panel Gp-Circuit Breaker -Side
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 1 |
252-7495 Panel Gp-Circuit Breaker -Rear
| 25***95 | Panel Group-Circuit Breaker; -Rear | 1 |
272-8412 Panel Gp-Circuit Breaker
| 14***56 | Support Group-Battery | 1 |
| 14***57 | Angle | 1 |
| 14***68 | Cable As; (Battery Terminal) (Red) | 1 |
252-7342 Panel Gp-Circuit Breaker -Side
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 1 |
252-7449 Panel Gp-Circuit Breaker -Side
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 1 |
252-7494 Panel Gp-Circuit Breaker -Rear
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 1 |
252-7438 Plug Gp-Box -Jacket Water Heater
| 16***37 | Support Group-Battery | 1 |
| 25***38 | Plug Group-Box; -Electrical Connector | 1 |
252-7700 Plug Gp-Box -Panel Lights
| 14***56 | Support Group-Battery | 1 |
| 14***57 | Angle | 1 |
| 14***68 | Cable As; (Battery Terminal) (Red) | 1 |
292-9749 Sensor & Mtg Gp-Pressure
| 29***49 | Sensor & Mtg Group-Pressure | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
121-3364 Sensor & Mtg Gp-Radiator
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 1 |
| 12***64 | Sensor & Mtg Group-Radiator | 1 |
| 13***26 | Cable As; (0000-Ga, Black) | 1 |
260-9523 Sensor Gp-Engine
| 17***29 | Switch Group-Magnetic | 1 |
| 17***30 | Switch Group-Magnetic; (Inlet Air Heater Power Relay) | 1 |
| 26***23 | Sensor Group-Engine | 1 |
204-2518 Sensor Gp-Liquid Level
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
276-9067 Sensor Gp-Pressure
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
276-8548 Sensor Gp-Pressure
| 27***48 | Sensor Group-Pressure; -Atmospheric | 1 |
266-8650 Sensor Gp-Pressure
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
194-6725 Sensor Gp-Pressure
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
239-2396 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
230-7149 Sensor Gp-Speed
| 23***49 | Sensor Group-Speed; -Crankshaft Speed-Timing, Crankshaft | 1 |
239-2397 Sensor Gp-Speed
| 23***97 | Sensor Group-Speed; -Timing, Camshaft | 1 |
4p-5820 Sensor Gp-Speed
| 4P***20 | Sensor Group-Speed; (Eng Speed Pick-Up) | 1 |
274-7396 Sensor Gp-Temperature
| 12***85 | Transformer As-Current | 4 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
253-9826 Sensor Gp-Temperature
| 11***21 | Transformer As-Current | 4 |
| 25***26 | Sensor Group-Temperature | 1 |
| 9X***72 | Strap-Cable | 8 |
271-0185 Sensor Gp-Temperature -Generator Bearing
| 11***22 | Transformer As-Current | 4 |
| 27***85 | Sensor Group-Temperature; -Generator Bearing | 1 |
| 9X***72 | Strap-Cable | 8 |
197-8391 Sensor Gp-Temperature
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
300-2212 Sensor Gp-Temperature
| 12***86 | Transformer As-Current | 4 |
| 30***12 | Sensor Group-Temperature | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
274-7395 Sensor Gp-Temperature
| 11***23 | Transformer As-Current | 4 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 9X***72 | Strap-Cable | 8 |
326-8058 Sensor Gp-Temperature -Generator Bearing
| 12***87 | Transformer As-Current | 4 |
| 32***58 | Sensor Group-Temperature; -Generator Bearing | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
280-7396 Starting Aid Gp-Ether
| 12***88 | Transformer As-Current | 4 |
| 28***96 | Starting Aid Group-Ether | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
261-3291 Starting Motor Gp-Electric
| 12***91 | Transformer As-Current | 4 |
| 26***91 | Starting Motor Group-Electric | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
6v-0885 Starting Motor Gp-Electric
| 12***89 | Transformer As-Current | 4 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
| 6V***85 | Starting Motor Group-Electric; -Cold Weather | 1 |
249-0635 Starting Motor Gp-Electric
| 12***15 | Transformer As-Current | 4 |
| 24***35 | Starting Motor Group-Electric | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
237-1962 Starting Motor Gp-Electric
| 12***90 | Transformer As-Current; (3000:5 Ratio)(3000:5) | 4 |
| 23***62 | Starting Motor Group-Electric | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
338-3454 Starting Motor Gp-Electric
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 4 |
| 20***18 | Transformer As; (Potential) | 1 |
244-9602 Strip Gp-Terminal -Ac
| 12***87 | Transformer As-Current | 4 |
| 24***02 | Strip Group-Terminal; -Ac | 1 |
263-1741 Strip Gp-Terminal -Switchgear
| 12***89 | Transformer As-Current | 4 |
| 26***41 | Strip Group-Terminal; -Switchgear | 1 |
281-3177 Strip Gp-Terminal -Dc
| 12***91 | Transformer As-Current | 4 |
| 28***77 | Strip Group-Terminal; -Dc | 1 |
252-7357 Strip Gp-Terminal -Load Share
| 12***88 | Transformer As-Current | 4 |
| 25***57 | Strip Group-Terminal; -Load Share | 1 |
276-7784 Strip Gp-Terminal -Dc
| 12***90 | Transformer As-Current; (3000:5 Ratio)(3000:5) | 4 |
| 27***84 | Strip Group-Terminal; -Dc | 1 |
281-2768 Strip Gp-Terminal -Switchgear
| 12***15 | Transformer As-Current | 4 |
| 28***68 | Strip Group-Terminal; -Switchgear | 1 |
295-6926 Support Gp-Battery
168-3237 Support Gp-Battery
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***37 | Support Group-Battery | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
142-2456 Support Gp-Battery
| 11***14 | End-Wire; (18-Ga) | 7 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 14***56 | Support Group-Battery | 1 |
315-7777 Support Gp-Battery
| 10***24 | Cable As | 1 |
| 14***57 | Switch Group-Magnetic; (Inlet Air Heater Power Relay) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
347-3237 Support Gp-Cable
| 10***38 | End-Wire; (16-Ga) | 24 |
| 24***57 | Harness As-Panel; (Circuit Breaker) | 1 |
| 34***37 | Support Group-Cable | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 00***34 | Protector | 4 |
| 06***09 | Screw; (8-32x0.75-In) | 6 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
261-3322 Switch Gp-Disconnect -Battery
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 26***21 | Harness As-Wiring; (Alternator) | 1 |
| 26***22 | Switch Group-Disconnect; -Battery | 1 |
175-2329 Switch Gp-Magnetic
| 12***69 | Potentiometer; (2000-Ohm, 2-Watt)(Speed Adjust) | 1 |
| 17***29 | Switch Group-Magnetic | 1 |
| 4W***72 | Knob; (Engine Speed Control) | 1 |
175-2330 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***38 | End-Wire; (16-Ga) | 1 |
148-0757 Switch Gp-Magnetic -Starting Motor
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 14***57 | Switch Group-Magnetic; (Inlet Air Heater Power Relay) | 2 |
| 26***17 | Harness As-Control | 1 |
258-0883 Switch Gp-Pressure
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 24***99 | Harness As-Wiring; (Emcp 3) | 1 |
| 25***74 | Harness As-Power; (Voltage Sensing) | 1 |
244-9692 Transformer As-Current -Neutral Sensing
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 24***92 | Transformer As-Current; -Neutral Sensing | 1 |
252-7562 Transformer As-Current
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 10***38 | End-Wire; (16-Ga) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
252-7563 Transformer As-Current
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***38 | End-Wire; (16-Ga) | 1 |
252-7564 Transformer As-Current
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***38 | End-Wire; (16-Ga) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
244-9843 Transformer As-Current -Neutral Sensing
| 11***84 | Switch As-Toggle; (Momentary)(Manual Engine Speed Control) | 1 |
| 11***14 | End-Wire; (18-Ga) | 3 |
| 24***43 | Transformer As-Current; -Neutral Sensing | 1 |
244-9842 Transformer As-Current -Neutral Sensing
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***07 | Cable-Electrical; (2-Conductor, 18-Ga)(2439-cm) | 0 |
252-7561 Transformer As-Current
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
288-1185 Transformer Gp-Current
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***23 | Block-Contact; (1-Pole)(Normally Open) | 1 |
288-1184 Transformer Gp-Current
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***25 | Block-Contact; (2-Pole) | 1 |
| 12***76 | Cover; (Emergency Stop) | 1 |
252-7321 Transformer Gp-Current
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 2 |
316-1096 Transformer Gp-Current
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 16 |
| 24***45 | Plate-Cover | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
316-1091 Transformer Gp-Current
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 4 |
| 24***36 | Roof; (Main) | 1 |
| 31***91 | Transformer Group-Current | 1 |
252-7319 Transformer Gp-Current
| 15***75 | Ladder Clip | 3 |
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 4 |
| 24***56 | Circuit Breaker As; (60-Ampere)(Jacket Water Heater) | 1 |
289-0656 Transformer Gp-Current -Medium Voltage
| 11***26 | Bolt; (M20x2.5x110-mm) | 12 |
| 22***92 | Washer-Hard; (21.5x35x8-mm Thk) | 12 |
| 28***56 | Transformer Group-Current; -Medium Voltage | 1 |
288-1183 Transformer Gp-Current
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***65 | Harness As-Sensor; (Coolant Level) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
316-1094 Transformer Gp-Current
| 14***68 | Seal; (80-cm Each) | 0 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 29 |
| 24***44 | Screen As | 1 |
288-1186 Transformer Gp-Current
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 13***89 | Clip; (Ladder) | 4 |
| 14***57 | Switch Group-Magnetic; (Inlet Air Heater Power Relay) | 1 |
316-1095 Transformer Gp-Current
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***46 | Plate-Cover | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
316-1090 Transformer Gp-Current
| 11***26 | Bolt; (M20x2.5x110-mm) | 12 |
| 22***92 | Washer-Hard; (21.5x35x8-mm Thk) | 12 |
| 30***78 | Plate As | 2 |
316-1093 Transformer Gp-Current
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 10 |
| 24***41 | Plate-Cover | 1 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
252-7320 Transformer Gp-Current
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
| 25***20 | Transformer Group-Current | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 4 |
288-1181 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 15***72 | Plug As-Connector; (4-Pin) | 1 |
288-1187 Transformer Gp-Current
| 28***87 | Transformer Group-Current | 1 |
288-1182 Transformer Gp-Current
| 15***75 | Ladder Clip | 2 |
| 25***56 | Harness As-Wiring; (Voltage Regulator) | 1 |
| 28***82 | Transformer Group-Current | 1 |
288-1180 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 7 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 7 |
252-7365 Transformer Gp-Potential
| 14***68 | Seal; (80-cm Each) | 0 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 41 |
| 24***47 | Plate-Cover | 1 |
239-1134 Valve Gp-Ether Starting
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 26 |
| 23***34 | Valve Group-Ether Starting | 1 |
| 29***79 | Channel As | 1 |
263-1745 Wiring Gp-Box
| 26***45 | Wiring Group-Box | 1 |
| 30***76 | Support As | 1 |
| 30***78 | . Bearing.; Needle, Support As, Cover | 1 |
260-9520 Wiring Gp-Electric Starting
| 16***90 | Bolt-Hex Head; (M20x2.5x130mm) | 1 |
| 17***52 | Washer-Hard; (22x60x6-mm Thk) | 1 |
| 25***74 | Mount-Isolation | 1 |
256-2150 Wiring Gp-Electronic Control
| 25***50 | Wiring Group-Electronic Control | 1 |
| 34***98 | Mount As | 2 |
260-9522 Wiring Gp-Electronic Control
| 26***22 | Wiring Group-Electronic Control | 1 |
| 34***98 | Mount As | 4 |
335-9439 Wiring Gp-Electronic Control
| 30***76 | Support As | 1 |
| 30***78 | . Bearing.; Needle, Support As, Cover | 1 |
| 33***39 | Wiring Group-Electronic Control | 1 |
260-9518 Wiring Gp-Engine
| 24***56 | Film-Warning; (Hot Surface, Hands Clear) | 1 |
| 26***18 | Wiring Group-Engine | 1 |
| 28***27 | Shield As-Turbocharger | 2 |
355-3351 Wiring Gp-Engine
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 16 |
| 26***79 | Cooler As | 2 |
| 27***88 | Support | 1 |
269-7024 Wiring Gp-Engine Electronic -Speed Adjust
| 26***24 | Wiring Group-Engine Electronic; -Speed Adjust | 1 |
| 27***13 | Bracket | 2 |
| 27***23 | Mount-Vibration | 8 |
325-7811 Wiring Gp-Generator
| 11***77 | Sleeve-Wear | 1 |
| 28***69 | Bracket As | 1 |
| 32***11 | Wiring Group-Generator | 1 |
278-4897 Wiring Gp-Generator -Voltage Sensing
| 16***15 | Washer | 10 |
| 25***73 | Bracket As-Housing | 1 |
| 25***77 | Seal-O-Ring | 1 |
278-4895 Wiring Gp-Generator -Current Transformer
| 27***95 | Wiring Group-Generator; -Current Transformer | 1 |
252-7427 Wiring Gp-Generator -Current Transformer
| 16***15 | Washer | 16 |
| 17***66 | Bolt; (M12x1.75x65-mm) | 16 |
| 25***27 | Wiring Group-Generator; -Current Transformer | 1 |
278-4899 Wiring Gp-Generator -Voltage Regulator
| 11***68 | Retainer-Bearing | 1 |
| 27***99 | Wiring Group-Generator; -Voltage Regulator | 1 |
| 27***20 | Bracket As-Housing | 1 |
244-9856 Wiring Gp-Generator -Circuit Breakers
| 24***56 | Wiring Group-Generator; -Circuit Breakers | 1 |
| 27***11 | Support As-Radiator; -Rh | 1 |
245-0095 Wiring Gp-Generator -Digital Voltage Regulator
| 24***95 | Wiring Group-Generator; -Digital Voltage Regulator | 1 |
| 27***10 | Support As-Radiator; -Lh | 1 |
267-8475 Wiring Gp-Generator -Voltage Adjust Switch
| 12***12 | Filter Element-Air; (Generator) | 1 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
252-7480 Wiring Gp-Generator -Annunciator Harness
| 12***12 | Filter Element-Air; (Generator) | 1 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
252-7418 Wiring Gp-Generator -Voltage Sensing
| 17***66 | Bolt; (M12x1.75x65-mm) | 16 |
| 25***18 | Wiring Group-Generator; -Voltage Sensing | 1 |
| 25***15 | Adapter As | 1 |
275-9901 Wiring Gp-Jacket Water Heater
| 27***10 | Support As-Radiator; -Lh | 1 |
| 27***11 | Support As-Radiator; -Rh | 1 |
| 27***01 | Wiring Group-Jacket Water Heater | 1 |
252-7554 Wiring Gp-Panel -Circuit Breaker
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 25***54 | Wiring Group-Panel; -Circuit Breaker | 1 |
252-7555 Wiring Gp-Panel -Circuit Breaker
| 25***55 | Wiring Group-Panel; -Circuit Breaker | 1 |
| 27***88 | Cable; (72-Inch) | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
330-3454 Wiring Gp-Panel -Voltage Sensing
| 11***61 | End-Wire; (10-Ga) | 2 |
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 22***98 | Film-Ground; (Earth) | 1 |
252-7347 Wiring Gp-Panel -Discrete Input/Output Module
| 25***47 | Wiring Group-Panel; -Discrete Input/Output Module | 1 |
| 27***10 | Support As-Radiator; -Lh | 1 |
| 27***11 | Support As-Radiator; -Rh | 1 |
252-7362 Wiring Gp-Panel -Discrete I/O, Rtd
| 16***00 | Cable As | 4 |
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 25***62 | Wiring Group-Panel; -Discrete I/O, Rtd | 1 |
252-7345 Wiring Gp-Panel -Rtd Module
| 16***15 | Washer | 13 |
| 25***45 | Wiring Group-Panel; -Rtd Module | 1 |
| 25***80 | Bracket As-Housing | 1 |
308-6431 Wiring Gp-Sensor
| 29***70 | Tape; (480-cm) | 0 |
| 30***31 | Wiring Group-Sensor | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 3 |
252-7693 Wiring Gp-Shutoff -Emergency Stop
| 24***63 | Bar-Bus | 3 |
| 24***64 | Bar-Bus | 2 |
| 25***93 | Wiring Group-Shutoff; -Emergency Stop | 1 |
282-4360 Wiring Gp-Shutoff
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
354-2746 Wiring Gp-Shutoff
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
263-1748 Wiring Gp-Shutoff -Emergency Stop
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
257-4183 Wiring Gp-Unit Injector
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
Enclosures, Guards And Bases
318-9737 Base Gp-Engine & Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
320-9143 Base Gp-Engine & Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
334-3696 Base Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
245-0024 Cover Gp-Enclosure -Top
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***24 | Cover Group-Enclosure; -Top | 1 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
245-0027 Cover Gp-Enclosure -Extension, Main
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***27 | Cover Group-Enclosure; -Extension, Main | 1 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
245-0007 Cover Gp-Generator -Side
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***07 | Cover Group-Generator; -Side | 1 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
352-8717 Cover Gp-Generator -Rear Cover
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
245-0004 Cover Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***04 | Cover Group-Generator | 1 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
352-8721 Cover Gp-Generator -Side
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
245-0013 Cover Gp-Generator -Rear
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***13 | Cover Group-Generator; -Rear | 1 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
303-8277 Cover Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
351-9799 Door As
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
357-5017 Duct Gp-Enclosure
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
357-2653 Duct Gp-Enclosure
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
336-7711 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3904 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3907 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3908 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
336-7705 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
336-7708 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3903 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3911 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
336-7707 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3905 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3910 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3909 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
356-3906 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
336-7706 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
336-7710 Enclosure Gp-Generator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
334-3102 Extension Gp-Base
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
296-7883 Frame As
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
305-4225 Mounting Gp-Rail
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
351-8508 Mounting Gp-Vibration Isolator
| 35***08 | Mounting Group-Vibration Isolator | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 12 |
| 5N***85 | Tape-Electrical; (Varnished Cambric) | 1 |
343-0899 Mounting Gp-Vibration Isolator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
259-2503 Mounting Gp-Vibration Isolator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
332-5670 Mounting Gp-Vibration Isolator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
343-0900 Mounting Gp-Vibration Isolator
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
323-3931 Rail Gp-Slide
| 32***31 | Rail Group-Slide | 1 |
| 8T***84 | Capscrew; (Hex Hd) (M12 X 1.75 X 45l Gr 10.9) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
286-5296 Shield Gp
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
| 26***17 | Setscrew; (M24x2-Thd) | 4 |
| 27***82 | Coupling Group-Flexible | 1 |
328-3638 Support As
| 10***49 | Rotor As-Magnetic | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 25***25 | Stator As-Magnet | 1 |
283-6310 Support As -Frame
| 27***76 | Stator-Exciter | 1 |
| 27***77 | Rotor-Exciter | 1 |
| 28***10 | Support As; -Frame | 1 |
328-3637 Support As
| 10***49 | Rotor As-Magnetic | 1 |
| 25***25 | Stator As-Magnet | 1 |
| 27***84 | Ring | 1 |
275-8608 Support As
| 09***71 | Washer-Spring | 6 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 25***00 | Stator-Exciter | 1 |
Engine Arrangement
336-7659 Engine Ar-Complete
| 12***90 | Lines Group-Engine Oil; -Pan | 1 |
| 12***98 | Plate & Film Group | 1 |
| 22***07 | Plug Group-Cylinder Head | 1 |
343-1709 Engine Ar-Complete
| 12***90 | Lines Group-Engine Oil; -Pan | 1 |
| 12***98 | Plate & Film Group | 1 |
| 22***07 | Plug Group-Cylinder Head | 1 |
343-1710 Engine Ar-Complete
| 12***90 | Lines Group-Engine Oil; -Pan | 1 |
| 12***98 | Plate & Film Group | 1 |
| 22***07 | Plug Group-Cylinder Head | 1 |
350-5517 Engine Ar-Core
| 33***59 | Engine Ar-Complete | 1 |
| 35***17 | Engine Ar-Core | 1 |
350-5526 Engine Ar-Core
| 34***09 | Engine Ar-Complete | 1 |
| 35***26 | Engine Ar-Core | 1 |
274-2255 Engine Ar-Core
| 11***80 | Pump Group-Engine Oil | 1 |
| 11***83 | Fastener Group-Oil Pump Mounting; -Engine | 1 |
| 21***35 | Piston & Rod Group | 12 |
324-6102 Engine Ar-Core
| 11***80 | Pump Group-Engine Oil | 1 |
| 11***83 | Fastener Group-Oil Pump Mounting; -Engine | 1 |
| 21***35 | Piston & Rod Group | 12 |
295-2678 Engine Ar-Core
| 11***80 | Pump Group-Engine Oil | 1 |
| 11***83 | Fastener Group-Oil Pump Mounting; -Engine | 1 |
| 21***35 | Piston & Rod Group | 12 |
342-8346 General Ar
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 32 |
| 22***27 | Base Group-Valve Cover & Inj Harn | 2 |
| 34***46 | General Ar | 1 |
336-7602 General Ar
| 33***02 | General Ar | 1 |
| 34***10 | Engine Ar-Complete | 1 |
342-8347 General Ar
| 10***18 | Clip | 4 |
| 10***19 | Clip | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
Fuel System
271-4313 Cooler Gp-Fuel
| 27***13 | Cooler Group-Fuel | 1 |
329-0946 Fastener Gp-Fuel Lines
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 2 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
| 2V***97 | Cable Assem. | 1 |
225-4152 Filter Gp-Fuel
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 2 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
| 22***52 | Filter Group-Fuel; -With Water Separator | 1 |
237-4875 Filter Gp-Fuel
| 23***75 | Filter Group-Fuel | 1 |
| 7L***71 | Battery Group; (24-Volt)(24-Volt) | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 7L***72 | Battery Group | 1 |
225-4153 Filter Gp-Water Sep & Fuel
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 19***25 | Block-Terminal; (500-Volt, 20-Ampere) | 20 |
295-9085 Injector Gp-Fuel
| 14***60 | Rail; (200-cm) | 0 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 4 |
315-7711 Lines Gp-Fuel
| 19***39 | Seal; (Each Includes 44-Dm) | 0 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 15 |
| 24***14 | Shroud As-Front | 1 |
357-9450 Lines Gp-Fuel
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 15 |
| 24***14 | Shroud As-Front | 1 |
| 24***16 | Slider As; (Front) | 1 |
315-7828 Lines Gp-Fuel
| 19***39 | Seal; (Each Includes 44-Dm) | 0 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 15 |
| 24***22 | Shroud As | 1 |
271-3840 Lines Gp-Fuel
| 14***60 | Rail; (200-cm) | 0 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 4 |
223-6421 Pump & Mtg Gp-Fuel Transfer
| 10***38 | End-Wire; (16-Ga) | 3 |
| 11***14 | End-Wire; (18-Ga) | 47 |
| 11***97 | End-Wire; (14-Ga) | 4 |
297-1027 Pump Gp-Fuel Injection
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 29 |
| 24***37 | Box As-Extension | 1 |
| 24***94 | Brace As | 1 |
261-0048 Pump Gp-Fuel Injection
| 13***88 | Nut-Ring | 1 |
| 13***98 | Latch As | 2 |
| 15***75 | Ladder Clip | 5 |
331-3635 Pump Gp-Fuel Transfer
| 13***98 | Latch As | 2 |
| 16***81 | Hinge As | 2 |
| 17***32 | Bolt-Hex Head; (M4x0.7x16mm) | 4 |
286-2531 Pump Gp-Fuel Transfer
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 26 |
| 24***39 | Box As; (Side Extension) | 1 |
327-0376 Valve Gp-Check -Fuel
| 24***93 | Bracket | 1 |
| 32***76 | Valve Group-Check; -Fuel | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 8 |
327-4448 Valve Gp-Check
| 13***08 | Bracket-Mounting | 6 |
| 24***85 | Support-Bus | 1 |
| 24***86 | Bar-Bus; (Medium Voltage) | 3 |
139-6873 Valve Gp-Fuel Bypass -Filter
| 13***08 | Bracket-Mounting | 6 |
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
| 24***85 | Support-Bus | 1 |
Generators
253-3514 Adapter Gp-Generator Coupling
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 25***14 | Adapter Group-Generator Coupling | 1 |
| 25***00 | Stator-Exciter | 1 |
339-6490 Adapter Gp-Generator Coupling
| 22***84 | Film-Identification; (Cat) | 3 |
| 22***24 | Film-Warning; (Automatic Engine Start) | 3 |
| 22***27 | Film-Warning; (Hot Surface) | 2 |
308-0843 Air Filter Gp-Generator
| 25***17 | Generator Group | 1 |
| 30***43 | Air Filter Group-Generator | 1 |
288-8710 Air Filter Gp-Generator
| 22***84 | Film-Identification; (Cat) | 3 |
| 22***24 | Film-Warning; (Automatic Engine Start) | 3 |
| 22***27 | Film-Warning; (Hot Surface) | 2 |
253-9769 Bracket Gp-Mounting -Opposite Drive End
| 25***19 | Generator Group | 1 |
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
343-3919 Bracket Gp-Mounting
| 30***35 | Generator Group | 1 |
| 34***19 | Bracket Group-Mounting | 1 |
329-7329 Bracket Gp-Mounting
| 30***27 | Generator Group | 1 |
| 32***29 | Bracket Group-Mounting | 1 |
339-6491 Bracket Gp-Mounting
| 30***31 | Generator Group | 1 |
| 33***91 | Bracket Group-Mounting | 1 |
278-7619 Bracket Gp-Mounting -Opposite Drive End
| 25***21 | Generator Group | 1 |
| 27***19 | Bracket Group-Mounting; -Opposite Drive End | 1 |
282-2565 Bracket Gp-Mounting -Drive End
| 25***23 | Generator Group | 1 |
| 28***65 | Bracket Group-Mounting; -Drive End | 1 |
278-7090 Cable Gp-Generator Ground
| 27***90 | Cable Group-Generator Ground | 1 |
| 30***47 | Generator Group | 1 |
312-6117 Cable Gp-Generator Ground
| 30***43 | Generator Group | 1 |
| 31***17 | Cable Group-Generator Ground | 1 |
274-5581 Cable Gp-Generator Ground
| 27***81 | Cable Group-Generator Ground | 1 |
| 30***39 | Generator Group | 1 |
308-7549 Cable Gp-Generator Ground
| 30***39 | Generator Group | 1 |
| 30***49 | Cable Group-Generator Ground | 1 |
278-7089 Cable Gp-Generator Ground
| 27***89 | Cable Group-Generator Ground | 1 |
| 30***43 | Generator Group | 1 |
278-7914 Connection Gp-Generator Leads -Extension Box, Rh
| 27***14 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
278-7929 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7860 Connection Gp-Generator Leads -Extension Box, Rh
| 27***60 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 30***23 | Generator Group, Link; B, Link B | 1 |
278-7814 Connection Gp-Generator Leads -Extension Box, Lh
| 27***14 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***65 | Generator Group | 1 |
278-7810 Connection Gp-Generator Leads -Extension Box, Lh
| 27***10 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***53 | Generator Group | 1 |
278-7824 Connection Gp-Generator Leads -Extension Box, Lh
| 27***24 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***15 | Generator Group | 1 |
278-7873 Connection Gp-Generator Leads -Extension Box, Rh
| 27***73 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 31***45 | Generator Group | 1 |
278-7928 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7932 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7863 Connection Gp-Generator Leads -Extension Box, Rh
| 27***63 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 31***21 | Generator Group | 1 |
278-7930 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7820 Connection Gp-Generator Leads -Extension Box, Lh
| 27***20 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***73 | Generator Group | 1 |
278-7912 Connection Gp-Generator Leads -Extension Box, Lh
| 27***12 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
278-7915 Connection Gp-Generator Leads -Extension Box, Rear
| 27***15 | Connection Group-Generator Leads; -Extension Box, Rear | 1 |
278-7927 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7934 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7826 Connection Gp-Generator Leads -Extension Box, Lh
| 27***26 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***19 | Generator Group | 1 |
278-7924 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7823 Connection Gp-Generator Leads -Extension Box, Lh
| 27***23 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***13 | Generator Group | 1 |
278-7811 Connection Gp-Generator Leads -Extension Box, Lh
| 27***11 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***57 | Generator Group | 1 |
278-7926 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7925 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7864 Connection Gp-Generator Leads -Extension Box, Rh
| 27***64 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 31***25 | Generator Group | 1 |
278-7936 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7812 Connection Gp-Generator Leads -Extension Box, Lh
| 27***12 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***61 | Generator Group | 1 |
278-7875 Connection Gp-Generator Leads -Extension Box, Rh
| 27***75 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 34***49 | Generator Group | 1 |
278-7931 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7815 Connection Gp-Generator Leads -Extension Box, Lh
| 27***15 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***69 | Generator Group | 1 |
278-7861 Connection Gp-Generator Leads -Extension Box, Rh
| 27***61 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 30***25 | Generator Group | 1 |
278-7862 Connection Gp-Generator Leads -Extension Box, Rh
| 27***62 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 31***17 | Generator Group | 1 |
278-7877 Connection Gp-Generator Leads -Extension, Rh
| 25***14 | Adapter Group-Generator Coupling | 1 |
| 25***23 | Key; (Square)(Exciter) | 1 |
| 25***45 | Stator Group-Main | 1 |
278-7913 Connection Gp-Generator Leads -Extension Box, Rh
| 27***13 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
278-7911 Connection Gp-Generator Leads -Extension Box, Lh
| 25***14 | Adapter Group-Generator Coupling | 1 |
| 25***23 | Key; (Square)(Exciter) | 1 |
| 25***60 | Stator Group-Main | 1 |
278-7933 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7935 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7821 Connection Gp-Generator Leads -Extension Box, Lh
| 27***21 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***75 | Generator Group | 1 |
278-7937 Connection Gp-Generator Leads -Extension Box, Rear
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
260-6666 Connection Gp-Generator Leads -Extension Box, Lh, Rh, Rear
| 26***66 | Connection Group-Generator Leads; -Extension Box, Lh, Rh, Rear | 1 |
| 30***49 | Generator Group | 1 |
278-7876 Connection Gp-Generator Leads -Extension Box, Rh
| 27***76 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 34***51 | Generator Group | 1 |
278-7822 Connection Gp-Generator Leads -Extension Box, Lh
| 27***22 | Connection Group-Generator Leads; -Extension Box, Lh | 1 |
| 30***11 | Generator Group | 1 |
260-6665 Connection Gp-Generator Leads -Extension Box, Lh, Rh, Rear
| 26***65 | Connection Group-Generator Leads; -Extension Box, Lh, Rh, Rear | 1 |
| 30***45 | Generator Group | 1 |
278-7872 Connection Gp-Generator Leads -Extension Box, Rh
| 27***72 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 31***29 | Generator Group | 1 |
278-7874 Connection Gp-Generator Leads -Extension Box, Rh
| 27***74 | Connection Group-Generator Leads; -Extension Box, Rh | 1 |
| 31***49 | Generator Group | 1 |
349-5019 Connection Gp-Terminal Strip -Extension Box, Rh
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
272-6578 Connection Gp-Terminal Strip
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
272-6575 Connection Gp-Terminal Strip
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
331-9704 Coupling Gp-Generator Drive
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
339-6559 Exciter Gp -Power
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
253-9799 Exciter Gp -Power
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***99 | Exciter Group; -Power | 1 |
339-6494 Exciter Gp -Permanent Magnet
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7665 Exciter Gp -Power
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
278-7682 Exciter Gp -Permanent Magnet
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
252-3934 Generator Ar
| 25***34 | Generator Ar | 1 |
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
301-0520 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0516 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
300-2248 Generator Ar
| 30***48 | Generator Ar | 1 |
301-0514 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0470 Generator Ar
| 24***58 | Film-Warning; (Shock, Electrocution Hazard)(Shock, Electrocution Hazard) | 1 |
| 30***70 | Generator Ar | 1 |
300-2228 Generator Ar
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
319-6646 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
319-6618 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0450 Generator Ar
| 30***50 | Generator Ar | 1 |
319-6626 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0448 Generator Ar
| 28***45 | Heater As-Space; (600-Watt) | 2 |
| 30***48 | Generator Ar | 1 |
| 33***63 | Harness As-Wiring; (Space Heater) | 1 |
301-0444 Generator Ar
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 2 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 30***44 | Generator Ar | 1 |
301-0526 Generator Ar
301-0454 Generator Ar
| 10***49 | Rotor As-Magnetic | 1 |
| 25***25 | Stator As-Magnet | 1 |
| 25***17 | Shaft | 1 |
319-6650 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0446 Generator Ar
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 8 |
| 28***45 | Heater As-Space; (600-Watt) | 2 |
| 30***46 | Generator Ar | 1 |
343-4352 Generator Ar
| 24***27 | Nut As; (M6x1-Thd) | 4 |
| 25***02 | Screen As; (Air) | 1 |
| 34***52 | Generator Ar | 1 |
301-0440 Generator Ar
| 30***40 | Generator Ar | 1 |
301-0466 Generator Ar
| 24***27 | Nut As; (M6x1-Thd) | 18 |
| 25***08 | Rectifier As | 1 |
| 25***10 | Varistor | 1 |
300-2240 Generator Ar
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
301-0512 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0474 Generator Ar
| 27***79 | Kit-Rotor Lead | 1 |
| 27***81 | Fan | 1 |
| 28***16 | Hub-Fan | 1 |
319-6622 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
252-3964 Generator Ar
| 25***64 | Generator Ar | 1 |
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
300-2244 Generator Ar
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
300-2232 Generator Ar
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
301-0524 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
343-4350 Generator Ar
| 25***88 | Hub | 1 |
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
301-0476 Generator Ar
| 25***89 | Bearing | 1 |
| 25***90 | Fan; (12-Blade) | 1 |
| 25***91 | Cap-Bearing | 1 |
319-6630 Generator Ar
| 23***28 | Hub-Flexible Coupling | 1 |
| 25***03 | Rectifier Group-Revolving | 1 |
| 27***77 | Rotor-Exciter | 1 |
301-0458 Generator Ar
| 16***15 | Washer | 21 |
| 25***83 | Plate | 1 |
| 25***84 | Insulator | 6 |
301-0462 Generator Ar
| 30***62 | Generator Ar | 1 |
| 6V***44 | Nut-Weld; (5/16-18-Thd) | 4 |
300-2236 Generator Ar
| 25***69 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 25***81 | Mounting Group-Generator | 1 |
| 25***05 | Screen Group-Air | 1 |
301-0519 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***19 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0473 Generator Gp
| 30***73 | Generator Group | 1 |
319-6621 Generator Gp
| 25***18 | Washer-Special | 2 |
| 31***21 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0447 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***47 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
343-4351 Generator Gp
| 25***18 | Washer-Special | 2 |
| 34***51 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0465 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***65 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
300-2231 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***31 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
300-2235 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***35 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
319-6617 Generator Gp
| 25***18 | Washer-Special | 2 |
| 31***17 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0453 Generator Gp
| 30***53 | Generator Group | 1 |
300-2239 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***39 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
319-6625 Generator Gp
| 25***18 | Washer-Special | 2 |
| 31***25 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
300-2247 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***47 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0511 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***11 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
319-6629 Generator Gp
| 25***18 | Washer-Special | 2 |
| 31***29 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
343-4349 Generator Gp
| 25***18 | Washer-Special | 2 |
| 34***49 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0445 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***45 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0469 Generator Gp
| 30***69 | Generator Group | 1 |
301-0443 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***43 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0513 Generator Gp
| 30***13 | Generator Group | 1 |
301-0515 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***15 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
300-2227 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***27 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0525 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***25 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0475 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***75 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0461 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***61 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
300-2243 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***43 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0523 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***23 | Generator Group, Link; B, Link B | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
252-3963 Generator Gp
| 24***27 | Nut As; (M6x1-Thd) | 4 |
| 25***63 | Generator Group | 1 |
| 33***88 | Screen As | 2 |
301-0457 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***57 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0449 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***49 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
319-6645 Generator Gp
| 25***18 | Washer-Special | 2 |
| 31***45 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
301-0439 Generator Gp
| 25***18 | Washer-Special | 2 |
| 30***39 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
252-3937 Generator Gp
| 25***37 | Generator Group | 1 |
| 28***48 | Screen As | 1 |
| 28***51 | Screen As; (Drive) | 1 |
319-6649 Generator Gp
| 25***18 | Washer-Special | 2 |
| 31***49 | Generator Group | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
253-9821 Heater As-Space
| 25***18 | Washer-Special | 2 |
| 25***21 | Heater As-Space | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
253-3528 Heater Gp-Space
| 25***28 | Heater Group-Space | 1 |
| 25***18 | Washer-Special | 2 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
361-5557 Heater Gp-Space
| 10***38 | End-Wire; (16-Ga) | 7 |
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 8 |
| 12***69 | Terminal-Blade; (14-Ga To 16-Ga) | 2 |
322-3173 Heater Gp-Space -Generator
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 4 |
| 23***58 | Module Group-Alarm | 1 |
| 24***03 | Film-Information; (Emcp 3 Annunciator) | 1 |
279-6764 Kit-Generator Repair -Exciter
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 12 |
| 24***28 | Frame As | 1 |
| 24***31 | Brace As | 1 |
279-6765 Kit-Generator Repair -Exciter
| 10***72 | Seal; (Control) | 1 |
| 15***75 | Ladder Clip | 3 |
| 23***42 | Screw; (M4x0.7x7-mm) | 1 |
253-9781 Mounting Gp-Generator
| 23***45 | Control Group-Engine Monitoring; (Resistive Temperature Device) | 1 |
| 25***81 | Mounting Group-Generator | 1 |
308-2993 Plate As
| 23***75 | Control Group-Engine Monitoring; -Discrete Input/Output | 1 |
| 30***93 | Plate As | 1 |
253-9803 Rectifier Gp-Revolving
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
| 25***03 | Rectifier Group-Revolving | 1 |
314-7755 Regulator As-Voltage -Digital
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 4 |
| 23***58 | Module Group-Alarm | 1 |
| 24***03 | Film-Information; (Emcp 3 Annunciator) | 1 |
282-4338 Rotor As
| 27***21 | Control Group-Generator Set; -Digital Voltage Regulator | 1 |
| 28***38 | Rotor As | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 4 |
254-8676 Rotor Gp-Generator
| 25***76 | Rotor Group-Generator | 1 |
| 30***45 | Control Group-Generator Set; -Emcp 3.1 | 1 |
254-8719 Rotor Gp-Generator
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 8 |
| 24***33 | Brace As | 1 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
254-8679 Rotor Gp-Generator
| 25***79 | Rotor Group-Generator | 1 |
| 30***47 | Control Group-Generator Set; -Emcp 3.3 | 1 |
254-8685 Rotor Gp-Generator
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 25***85 | Rotor Group-Generator | 1 |
282-4340 Rotor Gp-Generator
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 10 |
| 24***88 | Plate-Cover | 1 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
254-8687 Rotor Gp-Generator
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 25***87 | Rotor Group-Generator | 1 |
254-8706 Rotor Gp-Generator
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 16 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
337-1854 Rotor Gp-Generator
| 26***09 | Door Group-Access; -Vandalism Guard | 1 |
| 33***54 | Rotor Group-Generator | 1 |
254-8678 Rotor Gp-Generator
| 25***78 | Rotor Group-Generator | 1 |
| 30***46 | Control Group-Generator Set; -Emcp 3.2 | 1 |
254-8689 Rotor Gp-Generator
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 25***89 | Rotor Group-Generator | 1 |
254-8691 Rotor Gp-Generator
| 12***70 | Potentiometer; (10,000-Ohm)(Voltage Adjustment) | 1 |
| 13***98 | Latch As | 2 |
| 15***75 | Ladder Clip | 1 |
337-1853 Rotor Gp-Generator
| 26***36 | Bracket | 1 |
| 26***37 | Cover As-Access; (Vandalism Guard) | 1 |
| 33***53 | Rotor Group-Generator | 1 |
321-2713 Rotor Gp-Generator
| 17***81 | Nut; (1/4-20-Thd) | 4 |
| 18***58 | Panel As | 1 |
| 24***13 | Gasket; (Control Panel) | 1 |
254-8681 Rotor Gp-Generator
| 24***58 | Film-Warning; (Shock, Electrocution Hazard)(Shock, Electrocution Hazard) | 1 |
| 25***81 | Rotor Group-Generator | 1 |
| 31***55 | Regulator As-Voltage; -Generator | 1 |
254-8694 Rotor Gp-Generator
| 11***72 | Bolt; (M4x0.7x16-mm) | 4 |
| 12***70 | Potentiometer; (10,000-Ohm)(Voltage Adjustment) | 1 |
| 15***75 | Ladder Clip | 3 |
339-6487 Screen Gp-Air
| 23***48 | Panel Group-Control; -Generator Start | 1 |
| 23***50 | Bracket | 2 |
| 33***87 | Screen Group-Air | 1 |
282-2542 Screen Gp-Air
| 08***97 | Washer; (13x50x6-mm Thk) | 4 |
| 24***08 | Mount-Isolation | 4 |
| 28***42 | Screen Group-Air | 1 |
254-0005 Screen Gp-Air
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 4 |
| 24***13 | Gasket; (Control Panel) | 1 |
254-8439 Stator Gp-Main
| 24***73 | Film-Control Panel; (Stop, Starting Aid, Speed) | 1 |
| 25***39 | Stator Group-Main | 1 |
254-8447 Stator Gp-Main
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
| 14***76 | Film-Information; (Coolant Drain)(Coolant Drain) | 1 |
321-2746 Stator Gp-Main
| 32***46 | Stator Group-Main | 1 |
254-8539 Stator Gp-Main
| 25***39 | Stator Group-Main | 1 |
254-8380 Stator Gp-Main
| 10***72 | Seal; (Control) | 1 |
| 15***75 | Ladder Clip | 3 |
| 1H***93 | Lockwasher (External Tooth) | 4 |
254-8460 Stator Gp-Main
| 25***60 | Stator Group-Main | 1 |
254-8366 Stator Gp-Main
| 23***53 | Capacitor | 2 |
| 23***57 | Fuse; (0.25-Ampere) | 2 |
| 23***59 | Relay; (24-Volt)(Control Panel) | 2 |
321-2738 Stator Gp-Main
| 32***38 | Stator Group-Main | 1 |
254-8372 Stator Gp-Main
| 10***72 | Seal; (Control) | 1 |
| 15***75 | Ladder Clip | 3 |
| 23***42 | Screw; (M4x0.7x7-mm) | 1 |
254-8547 Stator Gp-Main
| 25***47 | Stator Group-Main | 1 |
321-2724 Stator Gp-Main
| 32***24 | Stator Group-Main | 1 |
321-2726 Stator Gp-Main
| 32***26 | Stator Group-Main | 1 |
254-8354 Stator Gp-Main
| 23***48 | Panel Group-Control; -Generator Start | 1 |
| 23***50 | Bracket | 2 |
| 25***54 | Stator Group-Main | 1 |
254-8374 Stator Gp-Main
| 10***72 | Seal; (Control) | 1 |
| 15***75 | Ladder Clip | 3 |
| 1H***93 | Lockwasher (External Tooth) | 4 |
254-8352 Stator Gp-Main
| 23***48 | Panel Group-Control; -Generator Start | 2 |
| 23***50 | Bracket | 4 |
| 25***52 | Stator Group-Main | 1 |
344-1007 Stator Gp-Main
| 34***07 | Stator Group-Main | 1 |
254-8458 Stator Gp-Main
| 25***58 | Stator Group-Main | 1 |
| 29***37 | Plate-Identification; (Cat C32, Acert) | 2 |
254-8382 Stator Gp-Main
| 10***72 | Seal; (Control) | 1 |
| 15***75 | Ladder Clip | 3 |
| 1H***93 | Lockwasher (External Tooth) | 4 |
254-8437 Stator Gp-Main
| 23***86 | Plate-Identification; (Machine)(17-Pin) | 1 |
| 25***37 | Stator Group-Main | 1 |
344-1006 Stator Gp-Main
| 34***06 | Stator Group-Main | 1 |
254-8537 Stator Gp-Main
| 25***37 | Stator Group-Main | 1 |
254-8436 Stator Gp-Main
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 16 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
254-8541 Stator Gp-Main
| 25***41 | Stator Group-Main | 1 |
254-8455 Stator Gp-Main
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
| 14***76 | Film-Information; (Coolant Drain)(Coolant Drain) | 1 |
254-8550 Stator Gp-Main
| 25***50 | Stator Group-Main | 1 |
254-8456 Stator Gp-Main
| 25***56 | Stator Group-Main | 1 |
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
254-8535 Stator Gp-Main
| 25***35 | Stator Group-Main | 1 |
254-8364 Stator Gp-Main
| 23***58 | Panel Ar-Control; -Generator Start, Dual | 1 |
| 25***64 | Stator Group-Main | 1 |
321-2736 Stator Gp-Main
| 32***36 | Stator Group-Main | 1 |
254-8358 Stator Gp-Main
| 23***57 | Panel Ar-Control; -Generator Start, Single | 1 |
| 25***58 | Stator Group-Main | 1 |
321-2744 Stator Gp-Main
| 32***44 | Stator Group-Main | 1 |
254-8435 Stator Gp-Main
| 24***98 | Plate-Cover | 1 |
| 24***99 | Plate-Cover | 1 |
| 25***35 | Stator Group-Main | 1 |
254-8443 Stator Gp-Main
| 25***43 | Stator Group-Main | 1 |
| 26***98 | Kit-Film; (Caterpillar)(Annunciator) | 1 |
254-8356 Stator Gp-Main
| 23***48 | Panel Group-Control; -Generator Start | 1 |
| 23***50 | Bracket | 2 |
| 25***56 | Stator Group-Main | 1 |
Lubrication System
264-1491 Base As-Oil Filter -Engine
| 00***01 | Elbow (To Serial No 1md225) | 1 |
| 10***97 | Valve-Ball | 3 |
| 15***50 | Elbow As | 1 |
258-7551 Breather Gp -Crankcase
| 25***51 | Breather Group; -Crankcase | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 6 |
| 3N***97 | Pin-Tapered | 2 |
119-8583 Fastener Gp-Oil Pump Mounting -Engine
| 11***83 | Fastener Group-Oil Pump Mounting; -Engine | 1 |
| 21***33 | Regulator As; (Engine Oil Level) | 1 |
| 28***92 | Hose As | 1 |
253-5389 Filler Gp-Engine Oil
| 16***26 | Valve-Ball; (Shutoff, Oil) | 1 |
| 25***89 | Filler Group-Engine Oil | 1 |
| 3B***41 | Nipple-- To Quick Release Valve; -- To Quick Release Valve | 1 |
264-1492 Filter Gp-Engine Oil
| 26***92 | Filter Group-Engine Oil; -Engine | 1 |
| 32***52 | Fan; (8-Blade) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
318-0666 Fumes Disposal Gp
| 25***38 | Fan As; (Radiator) | 1 |
| 31***66 | Fumes Disposal Group | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
283-2550 Gauge Gp-Oil Level (Dipstick) -Engine
| 28***50 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 29***71 | Fan As-Blower; (10-Blade) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
122-1790 Lines Gp-Engine Oil
| 12***90 | Lines Group-Engine Oil; -Pan | 1 |
| 32***52 | Fan; (8-Blade) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
188-4641 Lines Gp-Engine Oil
| 18***41 | Lines Group-Engine Oil | 1 |
| 1F***50 | Nut Rops Support | 2 |
271-3843 Lines Gp-Engine Oil Drain
| 23***71 | Clamp | 2 |
| 27***43 | Lines Group-Engine Oil Drain | 1 |
| 27***03 | Hose-Water Inlet; (Upper) | 1 |
330-5141 Lines Gp-Engine Oil Drain
| 23***71 | Clamp | 2 |
| 27***04 | Hose-Water Inlet; (Lower) | 1 |
| 29***41 | Hose-Water Inlet; (Upper) | 1 |
261-0502 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
116-1980 Pump Gp-Engine Oil
| 11***80 | Pump Group-Engine Oil | 1 |
| 23***36 | Mount As | 2 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
330-5135 Pump Gp-Prelubrication
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 1 |
| 21***57 | Pump Group-Water | 1 |
| 33***35 | Pump Group-Prelubrication | 1 |
280-1442 Pump Gp-Prelubrication -Manual
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***30 | Bearing As-Roller | 1 |
| 11***21 | Plug-Felt; (Water Pump Housing) | 1 |
5n-6237 Pump Gp-Engine Oil -Manual Lubrication
| 25***03 | Mounting Group-Vibration Isolator | 2 |
| 5N***37 | Pump Group-Sump; -Manual Lubrication | 1 |
280-7391 Regulator Gp-Oil Level
| 26***26 | Radiator Group | 1 |
| 26***62 | Guard Group-Fan | 2 |
| 27***49 | Brace; (Lh) | 1 |
308-3873 Valve Gp-Fluid Control
| 24***78 | Clip | 2 |
| 27***11 | Radiator Group | 1 |
| 27***13 | Cooler Group-Fuel | 1 |
Operator Station
271-5371 Alarm Gp
| 27***71 | Alarm Group; -Annunciator | 1 |
271-2168 Alarm Gp
| 27***68 | Alarm Group; -Annunciator | 1 |
245-0000 Box Gp-Control Panel
| 24***00 | Box Group-Control Panel | 1 |
263-1743 Control Gp-Emcp Electronic
| 26***43 | Control Group-Emcp Electronic | 1 |
252-7505 Control Gp-Engine Monitoring -Input/Output
| 25***05 | Control Group-Engine Monitoring; -Discrete Input/Output | 1 |
252-7507 Control Gp-Engine Monitoring -Resistive Temperature Device
| 25***07 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
237-0125 Control Gp-Engine Monitoring -Resistive Temperature Device
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
300-7645 Control Gp-Generator Set -Emcp 3.1
| 30***45 | Control Group-Generator Set; -Emcp 3.1 | 1 |
274-8516 Control Gp-Generator Set -Emcp 3.1
| 27***16 | Control Group-Generator Set; -Emcp 3.1 | 1 |
274-8518 Control Gp-Generator Set -Emcp 3.3
| 27***18 | Control Group-Generator Set; -Emcp 3.3 | 1 |
274-8517 Control Gp-Generator Set -Emcp 3.2
| 27***17 | Control Group-Generator Set; -Emcp 3.2 | 1 |
245-0082 Control Gp-Generator Set -Regulator
| 24***82 | Control Group-Generator Set; -Voltage Regulator | 1 |
300-7647 Control Gp-Generator Set -Emcp 3.3
| 30***47 | Control Group-Generator Set; -Emcp 3.3 | 1 |
300-7646 Control Gp-Generator Set -Emcp 3.2
| 30***46 | Control Group-Generator Set; -Emcp 3.2 | 1 |
274-8521 Control Gp-Generator Set -Digital Voltage Regulator
| 27***21 | Control Group-Generator Set; -Digital Voltage Regulator | 1 |
252-7417 Control Gp-Load Share Module
| 25***17 | Control Group-Load Share Module | 1 |
252-7369 Control Gp-Load Share Module
| 25***69 | Control Group-Load Share Module | 1 |
348-8196 Cover Gp-Access -Circuit Breaker
| 34***96 | Cover Group-Access; -Circuit Breaker | 1 |
272-8427 Cover Gp-Access -Circuit Breaker
| 27***27 | Cover Group-Access; -Circuit Breaker | 1 |
252-7556 Cover Gp-Control Panel -Annunciator
| 25***56 | Cover Group-Control Panel; -Annunciator | 1 |
245-0001 Cover Gp-Control Panel -Rear
| 24***01 | Cover Group-Control Panel; -Rear Console | 1 |
245-0023 Cover Gp-Control Panel -Front
| 24***23 | Cover Group-Control Panel; -Front | 1 |
269-8609 Door Gp-Access -Vandalism Guard
| 26***09 | Door Group-Access; -Vandalism Guard | 1 |
279-3444 Door Gp-Access -Vandalism Guard
| 27***44 | Door Group-Access; -Vandalism Guard | 1 |
236-1159 Module Gp-Alarm -Annunciator
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
252-7553 Module Gp-Alarm
| 25***53 | Module Group-Alarm | 1 |
245-0087 Mounting Gp-Control Panel -Isolator
| 24***87 | Mounting Group-Control Panel; -Isolator | 1 |
236-4958 Panel Ar-Control -Generator Start, Dual
| 23***58 | Panel Ar-Control; -Generator Start, Dual | 1 |
307-2617 Panel Ar-Control
| 30***17 | Panel Ar-Control; -Generator Start, Dual | 1 |
307-2992 Panel Ar-Control
| 30***92 | Panel Ar-Control | 1 |
236-4957 Panel Ar-Control -Generator Start, Single
| 23***57 | Panel Ar-Control; -Generator Start, Single | 1 |
307-2993 Panel Ar-Control
| 30***93 | Panel Ar-Control; -Generator Start, Dual | 1 |
307-2616 Panel Ar-Control -Generator Start Module
| 30***16 | Panel Ar-Control; -Generator Start Module | 1 |
324-8045 Panel Gp-Control -Emcp 3.1
| 32***45 | Panel Group-Control; -Emcp 3.1 | 1 |
233-7648 Panel Gp-Control -Generator Start
| 23***48 | Panel Group-Control; -Generator Start | 1 |
324-8047 Panel Gp-Control -Emcp 3.3
| 32***47 | Panel Group-Control; -Emcp 3.3 | 1 |
267-8472 Panel Gp-Control -Emcp 3.1
| 26***72 | Panel Group-Control; -Emcp 3.1 | 1 |
324-8046 Panel Gp-Control -Emcp 3.2
| 32***46 | Panel Group-Control; -Emcp 3.2 | 1 |
252-7406 Plate Gp-Cover
| 25***06 | Plate Group-Cover | 1 |
252-7652 Seal Gp-Enclosure
| 25***52 | Seal Group-Enclosure | 1 |
Service Equipment And Supplies
308-5837 Film Gp
| 30***37 | Film Group | 1 |
284-6651 Film Gp
| 28***51 | Film Group; -Terminal | 1 |
271-7376 Film Gp
| 27***76 | Film Group; -Custom Annunciator | 1 |
357-6155 Film Gp
| 35***55 | Film Group | 1 |
205-7860 Film Gp -Product Identification
| 20***60 | Film Group; -Product Identification | 1 |
252-7420 Film Gp -User Interface Panel
| 25***20 | Film Group; -User Interface Panel | 1 |
308-5838 Film Gp
| 30***38 | Film Group | 1 |
122-9798 Plate & Film Gp
| 12***98 | Plate & Film Group | 1 |
256-9739 Plate Gp-Engine Identification
| 25***39 | Plate Group-Engine Identification | 1 |
SR5 serial number reference
The PIN/serial plate on an SR5 generator end is riveted to the frame near the terminal box or front bearing pedestal, not on an engine - the SR5 is sold as a bare generator end paired with a separate Cat diesel engine (commonly a 3500-series unit such as the 3512B or 3516B/3516C) to form a complete genset. Read the first three characters as the serial prefix, which ties to a specific frame size, voltage class, and bearing configuration; the remaining digits are the unit sequence number, not a model year.
| Prefix | Identifies | Notes |
|---|---|---|
| G1F | SR5 generator end, 1424 frame, SAE 21 flywheel housing | 480V, roughly 1250 kW standby class. Thin sourcing (single dealer listing) - confirm exact rating with dealer. |
| G1G | SR5 generator end, 1424 frame, double-bearing configuration | 600V, roughly 1100 kW standby / 910 kW prime, permanent-magnet excitation. Thin sourcing (single dealer listing) - confirm with dealer. |
| G1W | SR5 generator end, roughly 2000 kW standby class | 480V, 60 Hz, 1800 rpm; unit seen was a 2012 build. Thin sourcing (single dealer listing) - confirm with dealer. |
| G1N | SR5 generator end, roughly 1000 kW standby class | Around 1250 kVA standby. Seen on an independent generator-end listing giving matching kW/kVA data; frame size and voltage not confirmed - confirm with dealer. |
| G2E | SR5 generator end, 1824 frame, double-bearing configuration | 4160V, roughly 2500 kW standby, SAE 00 flywheel housing, permanent-magnet excitation. Thin sourcing (single dealer listing) - confirm with dealer. |
| G2N | SR5 generator end, 1622 frame, single-bearing configuration | 480/277V, roughly 1750 kW standby, SAE 00 flywheel housing, fits Cat 3500-series diesel engines, permanent-magnet excitation. Thin sourcing (single dealer listing) - confirm with dealer. |
| G7G | SR5 generator end, 1844 frame, double-bearing configuration | 480/277V, roughly 2750 kW standby (2500 kW prime), form-wound stator, permanent-magnet excitation, SAE 00 flywheel housing, fits Cat 3516B/3516C-family diesel engines. Matching nameplate data seen on two independent dealer listings. |
| G7H | SR5 generator end, 1866 frame, double-bearing configuration | 480/277V, roughly 3000 kW standby, SAE 00 flywheel housing, fits Cat 3500-series diesel engines, permanent-magnet excitation. Thin sourcing (single dealer listing) - confirm with dealer. |
| G8E | SR5 generator end, 3045 frame, double-bearing configuration | 4160V, roughly 3100 kW standby, permanent-magnet excitation; unit seen was a circa-2010 build. Thin sourcing (single dealer listing) - confirm with dealer. |
| L1Y | SR5 generator end, 1647 frame, double-bearing configuration | 480/277V, roughly 2250 kW standby, SAE 00 flywheel housing, fits Cat 3500-series diesel engines, permanent-magnet excitation. Thin sourcing (single dealer listing) - confirm with dealer. |
| L1R | SR5 generator end, roughly 1280 kW standby class | Unused unit seen on an independent generator-end listing giving matching kW rating; frame size and voltage not confirmed - confirm with dealer. |
| L7J | SR5 generator set, prefix tied to an Operation & Maintenance manual and an electrical/hydraulic schematic manual | No frame, voltage, or kW spec found for this prefix beyond the manual titles - confirm with dealer. |
| G2K | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
| G2M | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
| G7F | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
| L1B | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
| L1F | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
| L1H | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
| L4K | SR5 generator prefix listed in a Cat parts-catalog index | No individual frame/voltage/kW spec found, only a catalog index listing - confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar SR5 generator run?
The SR5 isn't sold with a built-in engine - it's a generator end factory-matched to Cat 3500-series diesels: 3512, 3512C, 3516B, 3516C, 3516C-HD, and the current 3516E, plus the C27 and C32 industrial engines. The pairing is set by frame size, speed, and required output, and shouldn't be swapped in the field without re-verifying coupling and speed match.
What does a Caterpillar SR5 generator end weigh?
Bare generator-end weight varies widely by frame size. A documented mid-size 1824 frame runs roughly 5,400 kg (12,000 lb); the smaller 1424/1447 frames weigh less and the largest 1844/1866/3045 frames weigh considerably more. Always check the frame-specific nameplate rather than assume one weight across the SR5 range.
What replaced the Caterpillar SR5?
Nothing documented has superseded it - the SR5 remains Caterpillar's current large-frame generator end, still specified alongside the current 3516E and C32 engines. It shares voltage-regulator architecture with the earlier SR4/SR4B line, which sits below it in the range rather than being cleanly replaced by it.
What SR5 owners discuss
What engine does the SR5 actually run behind, and is it a standalone machine?
The SR5 is a generator end (alternator), not a self-contained machine. It bolts to the flywheel housing of a Cat diesel and is factory-paired across the 3500-series line, most commonly the 3508, 3512, and 3516 (including B-series variants). Frame size and lead configuration are matched to the specific engine and kW rating ordered, so two SR5-tagged units off different engines are not interchangeable without checking frame, voltage, and lead count first.
PMG or self-excited (IE) - which excitation type does the SR5 use, and what's the practical difference owners notice?
Both exist across the SR5 line. Internally-excited (IE) units use permanent magnets embedded in the exciter field to help voltage buildup and hold excitation through a fault. PMG (permanent magnet generator) units add a separate small generator that feeds the regulator independently of the main stator, so the set can sustain fault current to trip downstream breakers even with a shorted output - useful on larger prime-power installs, but it is one more rotating component that can fail on its own (commonly a bearing) and adds length/weight to the set. Shops sizing genset packages pick PMG mainly for fault-clearing capability, not routine reliability.
What wear patterns show up on the generator-end bearings and windings over time?
Same failure path reported across this alternator class: grease-lubricated bearings run quiet for years, then start growling as grease breaks down or contaminates - re-greasing at that point only masks the noise temporarily, the races are already pitted and the bearing will eventually seize and take the rotor or diode bridge with it. Winding wear shows up first as a falling insulation-resistance reading (megger test) rather than a visible symptom - moisture ingress or accumulated carbon dust from the engine room drags the reading down well before an actual ground fault happens. Regreasing intervals and quantities are stamped on a tag at the bearing housing; running the set for a period after greasing lets excess grease purge out rather than sit and cook.
What voltage regulation quirks come up in the field?
The AVR fitted to SR5 sets is shared across the broader SR4/SR4B/SR5 family paired with 3306 through 3500-series and C-series engines, so a regulator pulled from a same-family unit is often a valid stopgap while a factory-matched part is sourced - but confirm voltage class and sensing leads match before wiring it in. Typical AVR failure shows as one of two opposite symptoms: overvoltage (regulator stuck feeding excitation current) or zero output (open exciter field or failed regulator board). Both point back to the same short list - exciter stator/rotor windings, rotating diode bridge, brushes if fitted, and regulator wiring - before condemning the regulator itself.
What electrical/sensor issues show up on the control package paired with the SR5 (EMCP-style panels)?
Most field complaints trace to wiring and connectors, not the control module itself: corroded or loose harness connections at the engine-genset interface throw intermittent communication or sensor faults, and a code referencing mismatched start/run/stop input states usually means a bad switch or harness fault rather than a control board failure. Cleaning and reseating connectors, then resetting the controller, resolves a large share of nuisance faults. Persistent sensor codes after that point warrant checking the actual sensor and its wiring run rather than swapping the control module first.
Do the different SR5 frame sizes behave differently, or is it one spec across the board?
Frame size (documented from roughly the 1400s up through the 1800s in Cat's frame numbering) tracks kW rating and cooling capacity, not a design change - bigger frame, bigger kW, more airflow needed, same basic lap-wound, H-class insulated construction throughout. Temperature rise is rated around 125°C (257°F) at standby duty on the SR5 line, slightly lower than the older SR4B family's roughly 130°C (266°F) rating - relevant mainly for continuous-duty or high-ambient installs where thermal margin matters more than at standby-only use.
What should I check before buying a used SR5 generator end?
Get an insulation-resistance (megger) reading on the stator windings before assuming the unit is sound - a healthy winding reads well above the 1 megohm-per-1000V-rated-voltage floor, often into the hundreds of megohms range on a well-kept unit; anything trending low or dropping fast under a polarization-index test points to moisture or contamination that needs drying out or rewinding. Spin the shaft by hand and listen/feel for bearing roughness - grease masks noise short-term but not wear. Confirm frame size, voltage class, lead count, and excitation type (PMG vs IE) match the engine you intend to run it with, since these aren't universally interchangeable within the SR5 family. Check the exciter stator, rotating diode bridge, and AVR are present and match the unit's documented configuration - missing or mismatched excitation components are a common gap on units pulled from decommissioned sets. Have your dealer verify insulation resistance, bearing condition, and excitation-system match on a proper test stand before committing to a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific SR5 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.