Caterpillarwork toolshear-demolition/scrap
Caterpillar S340
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar S340 is a mobile scrap and demolition shear, a passive hydraulic work tool built to mount stick-side or boom-side on a compatible Cat hydraulic excavator carrier. It carries no engine, ECM, or hydraulic system of its own; every function, jaw clamp, blade cut, and 360-degree rotation, draws power from the carrier excavator's hydraulic circuit through the tool's rotator. Operating weight in stick-mount configuration runs about 4,250 kg (9,371 lb) including the mounting bracket, placing the S340 in the mid-size band of Cat's original S-series shear lineup, a family spanning the smaller S305 and S320 through the S325 and S340 up to the larger S365 and S390. Cat rated the S340 for stick mounting on excavators in roughly the 30 to 45 tonne class and for reach-boom mounting across a wider excavator range, giving contractors flexibility to match the shear to whichever compatible carrier is already on site.
Caterpillar later revised the shear line into a B-series generation, including the S320B, S325B, S340B, and larger siblings, with updated jaw geometry, a straighter lower jaw profile for better cutting-force distribution, and compatibility with newer excavator carrier platforms, while the original S305-through-S390 family stayed in service on older carriers. Because the S340 has no engine or driveline, its wear items are almost entirely mechanical: cutting blades, jaw and clamp pins and bushings, the rotator swivel, and the mounting-bracket bushings that interface with the carrier's stick or boom. That mechanical simplicity is what keeps the used and parts market for the S340 active today, centered on blade and cutting-edge replacement, rotator rebuild and swivel reseal kits, and pin-and-bushing rebuild sets that return older units to productive service on a scrap yard or demolition site well beyond their original duty cycle.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar S340 specifications
Engine
| Power source | No onboard engine. The shear is a passive hydraulic work tool; cutting and rotation are powered by the host excavator's hydraulic system. |
| Emissions tier | Not applicable — no engine or ECM on this attachment. |
Weights
| Operating weight, stick mount | 4,250 kg (9,371 lb), includes stick mounting bracket |
| Operating weight, boom mount | Heavier than the stick-mount figure; exact boom-mount weight not published on the factory spec sheet |
| Ground pressure | Not applicable — passive attachment, not a self-propelled machine |
Dimensions
| Overall length | 3,900 mm (153.5 in) |
| Overall height | 1,506 mm (59.3 in) |
| Overall width | 1,010 mm (39.8 in) |
| Jaw opening | 580 mm (22.8 in) |
| Jaw depth | 680 mm (26.8 in) |
| Jaw width, fixed blade | 440 mm (17.3 in) |
| Jaw width, moving blade | 120 mm (4.7 in) |
Performance
| Shear force at tip | 1,550 kN (171 short tons) |
| Shear force, primary blade center | 3,800 kN (418 short tons) |
| Shear force at throat | 7,300 kN (803 short tons) |
| Cycle time, jaw open | 4.5 seconds |
| Cycle time, jaw close | 3.5 seconds |
| Rotation | 360-degree continuous hydraulic rotation, either direction, for quick jaw positioning without repositioning the carrier |
| Cutting circuit, max operating pressure | 35,000 kPa (5,075 psi) |
| Cutting circuit, recommended flow | 300 L/min (79 gpm) |
| Cutting circuit, return flow during opening | 510 L/min (135 gpm) |
| Rotation circuit, max operating pressure | 14,000 kPa (2,030 psi) |
| Rotation circuit, recommended flow | 40 L/min (11 gpm) |
| Matched carrier operating weight, stick mount | 30,000–45,000 kg (66,150–99,225 lb) |
| Matched carrier operating weight, boom mount | 20,000–35,000 kg (44,100–77,175 lb) |
Service capacities (summary)
| Fuel tank | Not applicable — no onboard engine |
| Hydraulic system | No dedicated onboard reservoir; runs on the host excavator's auxiliary hydraulic circuit at the flow and pressure ratings listed under Performance |
| Engine oil | Not applicable — no engine |
| Cooling system | Not applicable — no engine |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
S340 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not applicable | S340 is a passive mobile scrap/demolition shear work tool with no onboard engine; it draws power from the carrier excavator's engine and hydraulic circuit. |
| Cooling system | Not applicable | No cooling system on the shear; the carrier excavator's cooling system is separate and unaffected. |
| Fuel tank | Not applicable | No fuel tank; the shear is not self-powered. |
| Transmission / powertrain compartment | Not applicable | No transmission or powertrain on the shear; jaw rotation and cutting motion are driven directly by carrier hydraulics through the shear's rotator and cylinders. |
| Final drives | Not applicable | No final drives; the shear is a static work tool with no travel drivetrain, it mounts to the carrier's stick. |
| Axles / differentials | Not applicable | No axles or differentials; not a wheeled or tracked unit. |
| Hydraulic system and tank | Not applicable, no dedicated tank on the shear | S340 has no onboard hydraulic reservoir. Jaw cylinders and rotator motor run off the host excavator's hydraulic circuit, at the flow and pressure that excavator supplies. Use the hydraulic oil type and viscosity grade specified in the carrier excavator's own operation and maintenance manual; no separate Cat fluid name is issued for the shear itself. |
| Grease (pivot pins, jaw linkage, rotator bearing) | Service to point of purge at each fitting per lubrication schedule; no reservoir capacity specified | Cat Prime Application Grease, NLGI 2, lithium-complex base with roughly 3% molybdenum disulfide (moly) EP additive, for high-load pivot, jaw-linkage, and rotator-bearing service. No seasonal viscosity split is published for grease. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar S340 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the S340 beyond the schedule
Predictive Maintenance & Hydraulic Condition Monitoring
The S340 carries no oil reservoir or filtration of its own, so predictive care means watching the carrier's hydraulic system at the tool interface. Inspect or sample the oil feeding the rotator motor and clamp cylinder for contamination, discoloration, or metal fines that signal wear inside the swivel or cylinder seals. Track rotator drift, clamp cycle time, and cutting-cycle slowdown as early indicators of seal wear or internal bypass before a full teardown becomes necessary.
Corrective & Common Repairs
Most S340 repairs center on the jaw and blade set. Reversible cutting edges let a crew flip worn blades before full replacement, and the bushing-retained bolt design lets tips and blades be swapped with standard tools in well under an hour. Common corrective work also includes replacing worn clamp-arm and jaw pins, resealing a weeping rotator swivel without pulling the shear off the carrier, and re-torquing or replacing blade-retention bushings loosened by repeated impact loading.
Overhaul & Rebuild Points
A full S340 rebuild focuses on three wear zones: the jaw and clamp-arm pin-and-bushing joints, the blade pockets and retention bushings, and the hydraulic rotator swivel. High-cycle scrap work elongates pin bores and blade pockets faster than the pins themselves wear, so rebuilds typically replace pins and bushings as matched sets rather than individually. Rotator rebuilds address swivel seal wear and motor backlash, restoring full 360-degree rotation and eliminating drift under load.
Seasonal & Environment Servicing
Scrap and demolition sites expose the S340's pins, bushings, and rotator seals to abrasive fines, mud, and temperature swings. In cold climates, confirm the carrier's hydraulic oil grade suits low-temperature startup, since the shear has no independent warm-up circuit of its own. In wet or dusty environments, grease pivot points more frequently to purge contaminated grease from the joints, and clear packed debris from the jaw throat and rotator housing before it accelerates blade-pocket and swivel wear.
S340 attachments & work tools
Carrier excavator compatibility (stick-mounted)
Matched factory carriers for the S340 shear are the Cat 345B L and 345B Series II excavators, sized 30,000 to 45,000 kg (66,150 to 99,225 lb) operating weight for stick mounting. This is one weight class up from the S325's stick-mount range, consistent with the S340's larger jaw and higher cutting force.
Carrier excavator compatibility (reach-boom mounted)
For boom-mounted use the S340 matches Cat 322B L, 325B L, 330B L, 345B L, 365B L and 375 L excavators, spanning roughly 20,000 to 35,000 kg (44,100 to 77,175 lb) operating weight. Boom mounting lets a heavier, higher-force shear run on a lighter-class carrier than stick mounting requires.
Boom-mounted configuration
Boom mounting trades reach for cutting force, letting the S340 run on carriers a class lighter than its stick-mount range. Boom-mount bracket weight differs from the stick-mount bracket; base shear weight with the stick bracket is about 4,250 kg (9,371 lb).
Mounting / coupler system
The shear uses a bolt-on mounting bracket configured for either direct pin-on installation or fitment to a dedicated quick coupler, matching the bracket approach used across the S305-S390 shear family.
Hydraulic cutting circuit
The cutting circuit runs on a dedicated auxiliary line with recommended flow around 300 L/min (79 gpm) and maximum operating pressure near 35,000 kPa (5,075 psi). Cycle time is about 4.5 seconds to open and 3.5 seconds to close; the carrier's auxiliary circuit must be plumbed to these figures before fitting the shear.
Hydraulic rotation circuit
A separate low-pressure circuit drives the 360-degree jaw rotator, with recommended flow around 40 L/min (11 gpm) and maximum operating pressure near 14,000 kPa (2,030 psi). This lets the operator index the jaws to the cutting angle without repositioning the carrier.
Rotation system
The S340 uses the same hydraulic 360-degree rotator design shared across the S-series shear line, letting the jaws spin a full turn in either direction to line up a cut. It is the standard single-motor rotator sized for this weight class rather than the larger dual-motor unit used on the bigger S365/S390 siblings.
Jaw and knife configuration
Jaws use a straight lower-jaw design that spreads steel along the jaw length rather than concentrating force at a narrow apex, increasing effective cutting force through the stroke. Knives are reversible: the main and front knives carry four cutting edges, side-cutter knives carry two, and blade fasteners use recessed retainers rather than exposed bolts.
Cutting capacity by material
Rated capacity on narrow I-beam (IPE) stock runs up to about 550 mm (21.7 in) beam height, and on wide I-beam (HE-A) stock up to about 330 mm (13 in) beam height; round bar to about 100 mm (3.9 in) and square bar to about 90 mm (3.5 in). Actual capacity depends on carrier hydraulic output, knife condition and steel tensile strength; figures are approximations, not guarantees.
Guarding options
A falling-object guard on the carrier excavator is recommended for demolition work with overhead debris risk; this is a dealer-fitted option on the host machine, not part of the shear itself. Large access panels on the shear housing top, bottom and sides allow servicing internal components while the housing keeps the cylinder enclosed through the full cutting cycle.
Later-generation S340B (separate series, do not mix specs)
A later S340B generation exists with different figures: about 4,385 kg (9,670 lb) stick-mount weight and roughly 4,695 kg (10,351 lb) boom-mount weight, a 560 mm (22 in) jaw opening, and a carrier range commonly cited around 20 to 35 tonnes, lighter than the original S340's 30-45 tonne stick-mount range. Cutting and rotation circuit pressures (about 35,000 kPa/5,075 psi cutting, 14,000 kPa/2,030 psi rotation) carried over largely unchanged between generations, but treat S340 and S340B as separate series and confirm the nameplate before applying capacity or carrier-fit numbers.
All S340 assemblies by section
Every catalogued assembly group for the Caterpillar S340. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Frame And Body
243-1539 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 2 |
| 24***39 | Cover Group-Access | 1 |
247-8418 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 2 |
| 24***18 | Cover Group-Access | 1 |
247-8415 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 2 |
| 24***15 | Cover Group-Access | 1 |
242-2062 Cover Gp-Access
| 16***60 | Rotator Group-Hydraulic | 1 |
| 17***55 | Housing Group-Shear | 1 |
| 21***97 | Housing Group-Shear | 1 |
243-1540 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 1 |
| 24***40 | Cover Group-Access | 1 |
242-9605 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 2 |
| 24***05 | Cover Group-Access | 1 |
242-2063 Cover Gp-Access
| 16***60 | Rotator Group-Hydraulic | 1 |
| 18***99 | Housing Group-Shear | 1 |
| 21***96 | Housing Group-Shear | 1 |
247-8416 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 2 |
| 24***16 | Cover Group-Access | 1 |
242-9603 Cover Gp-Access
| 17***96 | Housing Group-Shear | 1 |
| 17***98 | Rotator Group-Hydraulic | 1 |
| 24***03 | Cover Group-Access | 1 |
247-8417 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 2 |
| 24***17 | Cover Group-Access | 1 |
242-9604 Cover Gp-Access
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 24***58 | Latch Group-Access Door | 1 |
| 24***04 | Cover Group-Access | 1 |
242-3736 Cover Gp-Access
| 17***10 | Rotator Group-Hydraulic | 1 |
| 19***87 | Housing Group-Shear | 1 |
| 21***50 | Housing Group-Shear | 1 |
227-4318 Guide Gp-Lines
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 22***18 | Guide Group-Lines | 1 |
| 24***58 | Latch Group-Access Door | 1 |
196-2019 Housing Gp-Shear
| 08***10 | Setscrew; (M10x21-mm) | 6 |
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 3 |
| 15***18 | Lockwasher | 6 |
217-1396 Housing Gp-Shear
| 14***78 | Lockwasher | 24 |
| 15***21 | Lockwasher | 24 |
| 16***64 | Bolt-Socket Head; (M20x2.5x55-mm) | 24 |
318-9773 Housing Gp-Shear
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 14***78 | Lockwasher | 24 |
| 15***19 | Lockwasher | 2 |
171-5496 Housing Gp-Shear
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 17***96 | Housing Group-Shear | 1 |
| 24***58 | Latch Group-Access Door | 2 |
318-9778 Housing Gp-Shear
| 14***52 | Elbow As. | 2 |
| 15***19 | Lockwasher | 10 |
| 15***21 | Lockwasher | 18 |
217-1397 Housing Gp-Shear
| 14***52 | Elbow As. | 2 |
| 15***19 | Lockwasher | 10 |
| 15***21 | Lockwasher | 18 |
216-6850 Housing Gp-Shear
| 09***07 | Bolt; (M16x2x120-mm) | 8 |
| 10***40 | Plug | 1 |
| 15***46 | Seal | 1 |
184-3399 Housing Gp-Shear
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 18***99 | Housing Group-Shear | 1 |
| 24***58 | Latch Group-Access Door | 1 |
235-0577 Housing Gp-Shear
| 09***07 | Bolt; (M16x2x120-mm) | 8 |
| 10***40 | Plug | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
318-9776 Housing Gp-Shear
| 14***78 | Lockwasher | 24 |
| 15***19 | Lockwasher | 2 |
| 15***21 | Lockwasher | 24 |
217-1395 Housing Gp-Shear
| 14***52 | Elbow As. | 2 |
| 15***19 | Lockwasher | 46 |
| 15***21 | Lockwasher | 18 |
197-7187 Housing Gp-Shear
| 10***40 | Plug | 1 |
| 15***46 | Seal | 1 |
| 15***18 | Lockwasher | 8 |
245-8016 Housing Gp-Shear
| 10***40 | Plug | 1 |
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
195-0777 Housing Gp-Shear
| 19***77 | Housing Group-Shear | 1 |
| 22***15 | Plate As | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 1 |
245-8017 Housing Gp-Shear
| 10***40 | Plug | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***46 | Seal | 1 |
217-1398 Housing Gp-Shear
| 09***07 | Bolt; (M16x2x120-mm) | 8 |
| 10***40 | Plug | 1 |
| 11***73 | Seal; (0.5cm) (X2) | 0 |
177-3355 Housing Gp-Shear
| 11***73 | Seal; (0.5cm) (X2) | 0 |
| 17***55 | Housing Group-Shear | 1 |
| 24***58 | Latch Group-Access Door | 2 |
242-2058 Latch Gp-Access Door
| 15***19 | Lockwasher | 2 |
| 15***21 | Lockwasher | 34 |
| 16***12 | Clip; (Slot) | 2 |
171-5558 Mounting Gp-Shear
| 14***52 | Elbow As. | 2 |
| 15***19 | Lockwasher | 2 |
| 15***21 | Lockwasher | 18 |
Hydraulic System
171-5554 Cylinder & Lines Gp-Shear
| 09***69 | Bolt | 24 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***46 | Seal | 1 |
184-3404 Cylinder & Lines Gp-Shear
| 18***04 | Cylinder & Lines Group-Shear | 1 |
| 28***28 | Bracket As | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
222-8830 Cylinder & Lines Gp-Shear
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 1 |
| 18***78 | Cylinder Group-Shear | 1 |
222-8828 Cylinder & Lines Gp-Shear
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 1 |
187-2962 Cylinder & Lines Gp-Shear
| 17***35 | Mounting Group-Cylinder | 1 |
| 17***49 | Lines Group-Cylinder | 1 |
| 17***54 | Cylinder & Lines Group-Shear | 1 |
196-2026 Cylinder & Lines Gp-Shear
| 12***11 | Hose As | 1 |
| 16***54 | Seal | 1 |
| 16***16 | Seal | 1 |
171-5497 Cylinder & Lines Gp-Shear
| 09***69 | Bolt | 24 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***46 | Seal | 1 |
187-2996 Cylinder & Lines Gp-Shear
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 1 |
| 17***60 | Cylinder Group-Shear | 1 |
177-3369 Cylinder & Lines Gp-Shear
| 10***86 | Spring | 1 |
| 17***69 | Cylinder & Lines Group-Shear | 1 |
| 24***59 | Latch | 1 |
184-3403 Cylinder & Valve Gp
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 1 |
196-2022 Cylinder & Valve Gp
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
187-2945 Cylinder & Valve Gp
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
177-3360 Cylinder & Valve Gp
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 1 |
| 17***60 | Cylinder & Valve Group | 1 |
187-2993 Cylinder & Valve Gp
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
187-2978 Cylinder Gp-Shear
| 16***16 | Seal | 1 |
| 16***03 | Bushing | 2 |
| 17***23 | Plug As | 2 |
196-2030 Cylinder Gp-Shear
| 16***16 | Seal | 1 |
| 16***03 | Bushing | 2 |
| 17***23 | Plug As | 2 |
171-5560 Cylinder Gp-Shear
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
177-3368 Cylinder Gp-Shear
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***19 | Lockwasher | 2 |
184-3405 Cylinder Gp-Shear
| 14***06 | Bolt-Socket Head; (M20x2.5x140-mm) | 5 |
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
242-1185 Lines Gp-Connecting
| 22***24 | Hose As | 2 |
| 22***25 | Hose As | 2 |
| 24***85 | Lines Group-Connecting | 1 |
241-5636 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
| 21***55 | Hose As | 1 |
| 21***56 | Hose As | 1 |
211-9059 Lines Gp-Connecting
| 16***46 | Bar-Clamp | 2 |
| 16***90 | Clip; (Slot) | 2 |
| 16***91 | Clip; (Tab) | 2 |
216-1733 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 20***98 | Hose As | 2 |
| 20***99 | Hose As | 2 |
203-3164 Lines Gp-Connecting
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 2 |
318-4547 Lines Gp-Connecting
| 16***43 | Seal | 1 |
| 17***05 | Adapter As | 2 |
| 24***86 | Hose As | 2 |
221-0857 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
| 20***07 | Hose As | 1 |
242-1184 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
| 21***02 | Hose As | 2 |
211-9716 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 20***34 | Hose As | 2 |
| 20***35 | Hose As | 2 |
221-0856 Lines Gp-Connecting
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 20***69 | Hose As | 2 |
| 22***56 | Lines Group-Connecting | 1 |
203-2490 Lines Gp-Connecting
| 09***48 | Nipple, Grease | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 24 |
| 16***16 | Seal | 1 |
302-8171 Lines Gp-Connecting
| 23***03 | Hose As | 2 |
| 23***04 | Hose As | 2 |
| 30***71 | Lines Group-Connecting | 1 |
171-5565 Lines Gp-Connecting
| 09***48 | Nipple, Grease | 1 |
| 16***16 | Seal | 1 |
| 16***87 | Bushing | 2 |
225-2729 Lines Gp-Connecting
| 21***51 | Hose As | 2 |
| 21***52 | Hose As | 2 |
| 22***29 | Lines Group-Connecting | 1 |
293-2806 Lines Gp-Connecting
| 24***84 | Lines Group-Connecting | 1 |
| 24***85 | Lines Group-Connecting | 1 |
| 29***06 | Lines Group-Connecting | 1 |
231-7108 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
| 21***27 | Hose As | 2 |
197-6880 Lines Gp-Connecting
| 09***48 | Nipple, Grease | 1 |
| 16***16 | Seal | 1 |
| 16***41 | Bushing | 2 |
203-3832 Lines Gp-Connecting
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 17***33 | Hose As | 2 |
| 20***32 | Lines Group-Connecting | 1 |
202-0675 Lines Gp-Connecting
| 09***48 | Nipple, Grease | 1 |
| 16***16 | Seal | 1 |
| 17***23 | Plug As | 4 |
177-5026 Lines Gp-Connecting
| 09***48 | Nipple, Grease | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 24 |
| 16***16 | Seal | 1 |
304-9831 Lines Gp-Connecting
| 24***38 | Hose As | 2 |
| 30***31 | Lines Group-Connecting | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
221-0797 Lines Gp-Connecting
| 11***20 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 20***98 | Hose As | 2 |
292-1512 Lines Gp-Connecting
| 16***46 | Bar-Clamp | 2 |
| 16***90 | Clip; (Slot) | 2 |
| 16***91 | Clip; (Tab) | 2 |
202-9666 Lines Gp-Connecting
210-9275 Lines Gp-Connecting
| 19***69 | Hose As | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 21***75 | Lines Group-Connecting | 1 |
291-1280 Lines Gp-Connecting
| 10***16 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
201-7607 Lines Gp-Connecting
| 09***48 | Nipple, Grease | 1 |
| 14***84 | Bolt-Socket Head; (M20x2.5x110-mm) | 22 |
| 16***16 | Seal | 1 |
171-5549 Lines Gp-Cylinder
| 10***36 | Connector | 2 |
| 10***37 | Seal | 1 |
| 15***94 | Adapter As | 2 |
170-2174 Manifold Gp-Control
| 17***74 | Manifold Group-Control | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 2 |
170-2172 Motor & Manifold Gp-Rotator
| 17***72 | Motor & Manifold Group-Rotator | 1 |
| 29***43 | Hose As | 2 |
| 29***45 | Hose As | 2 |
170-2173 Motor Gp-Gerotor
| 17***73 | Motor Group-Gerotor | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 2 |
216-7650 Motor Gp-Gerotor
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 2 |
| 21***50 | Motor Group-Gerotor | 1 |
320-1326 Motor Gp-Gerotor
| 21***56 | Hose As | 2 |
| 21***57 | Hose As | 2 |
| 32***26 | Motor Group-Gerotor | 1 |
171-5535 Mounting Gp-Cylinder
| 17***35 | Mounting Group-Cylinder | 1 |
| 32***36 | Hose As | 2 |
| 32***37 | Hose As | 2 |
171-8110 Rotator Gp-Hydraulic
| 17***73 | Motor Group-Gerotor | 1 |
| 17***76 | Ring-Mounting | 1 |
| 17***77 | Gear-Drive; (15-Teeth) | 1 |
171-5555 Rotator Gp-Hydraulic
| 17***73 | Motor Group-Gerotor | 1 |
| 17***74 | Manifold Group-Control | 1 |
| 17***76 | Ring-Mounting | 1 |
216-7649 Rotator Gp-Hydraulic
| 03***43 | Seal-O-Ring | 1 |
| 08***09 | Spacer; (16.6x32x8.5-mm Thk) | 34 |
| 12***28 | Adaptor - Includes:- | 2 |
169-6060 Rotator Gp-Hydraulic
| 15***35 | Elbow As | 4 |
| 15***18 | Lockwasher | 2 |
| 15***19 | Lockwasher | 1 |
171-7526 Rotator Gp-Hydraulic
| 17***21 | Kit-Housing | 1 |
| 17***22 | Shaft-Output | 1 |
| 17***25 | Key-Square | 1 |
217-1423 Rotator Gp-Hydraulic
| 15***94 | Adapter As | 2 |
| 15***44 | Seal | 1 |
| 15***46 | Seal | 1 |
319-2124 Rotator Gp-Hydraulic
| 03***43 | Seal-O-Ring | 1 |
| 09***48 | Nipple, Grease | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
319-2123 Rotator Gp-Hydraulic
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
| 14***53 | Plug | 1 |
| 18***82 | Bolt-Socket Head; (M20x2.5x65-mm) | 16 |
194-6068 Rotator Gp-Hydraulic
| 17***73 | Motor Group-Gerotor | 1 |
| 17***74 | Manifold Group-Control | 1 |
| 17***77 | Gear-Drive; (15-Teeth) | 1 |
171-5498 Rotator Gp-Hydraulic
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 4 |
| 17***98 | Rotator Group-Hydraulic | 1 |
| 7Y***19 | Seal-O-Ring (Id=12.37mm) | 2 |
172-1124 Swivel Gp
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 8 |
| 12***28 | Adaptor - Includes:- | 4 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 4 |
170-3045 Swivel Gp
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 16 |
| 12***28 | Adaptor - Includes:- | 4 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 4 |
265-6468 Swivel Gp
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 16 |
| 12***28 | Adaptor - Includes:- | 4 |
| 12***24 | Seal-O-Ring; (12.37mm Id) | 4 |
208-8451 Valve Gp-Control
| 08***72 | Seal-O-Ring | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 15***94 | Adapter As | 6 |
174-4901 Valve Gp-Control -Quick
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 8 |
| 12***28 | Adaptor - Includes:- | 4 |
| 12***24 | Seal-O-Ring; (12.37mm Id) | 4 |
170-3229 Valve Gp-Speed Control
| 08***72 | Seal-O-Ring | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 15***94 | Adapter As | 6 |
208-5125 Valve Gp-Speed Control
| 16***43 | Seal | 1 |
| 17***57 | Plug As | 4 |
| 17***14 | Stator | 1 |
172-2207 Valve Gp-Speed Control
| 16***43 | Seal | 1 |
| 17***41 | Stator | 1 |
| 17***42 | Rotor | 1 |
Service Equipment And Supplies
196-2018 Film Gp
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 4 |
| 17***55 | Seal-O-Ring | 2 |
| 19***18 | Film Group | 1 |
195-0773 Film Gp
| 17***30 | Plug | 6 |
| 17***31 | Valve | 1 |
| 17***32 | Plug-Screw | 2 |
172-8364 Film Gp
| 16***80 | Kit-Service; (Counterbalance Valve) | 2 |
| 17***64 | Film Group | 1 |
| 18***01 | Manifold | 1 |
184-3398 Film Gp
| 17***30 | Plug | 6 |
| 17***31 | Valve | 1 |
| 17***32 | Plug-Screw | 2 |
197-7183 Film Gp
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
177-3353 Film Gp
| 13***54 | Plug As | 3 |
| 17***53 | Film Group | 1 |
| 20***87 | Slack Adjuster Group | 1 |
235-2732 Kit-Maintenance
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 16***74 | Shim; (0.5-mm Thk) | 10 |
200-2134 Kit-Maintenance
| 14***74 | Fitting As | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
235-0605 Kit-Maintenance
| 14***74 | Fitting As | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
177-3356 Kit-Maintenance
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
184-3400 Kit-Maintenance
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
235-2730 Kit-Maintenance
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 16***74 | Shim; (0.5-mm Thk) | 10 |
197-7186 Kit-Maintenance
| 14***08 | Fitting | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
195-0775 Kit-Maintenance
| 14***08 | Fitting | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
183-5625 Kit-Maintenance
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
200-2885 Lock Gp-Shear
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 17***03 | Wrench-T-Handle | 1 |
200-2962 Lock Gp-Shear
| 20***62 | Lock Group-Shear | 1 |
200-2960 Lock Gp-Shear
| 14***74 | Fitting As | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
200-2961 Lock Gp-Shear
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 16***92 | Wrench | 1 |
200-2959 Lock Gp-Shear
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 17***03 | Wrench-T-Handle | 1 |
199-8486 Lock Gp-Shear
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 17***03 | Wrench-T-Handle | 1 |
Work Tool Arrangement
184-3397 Shear Ar-Hydraulic
| 18***97 | Shear Ar-Hydraulic | 1 |
| 18***98 | Film Group | 1 |
| 18***00 | Kit-Maintenance | 1 |
196-2016 Shear Ar-Hydraulic
| 19***16 | Shear Ar-Hydraulic | 1 |
| 19***17 | Shear Group-Hydraulic | 1 |
| 19***18 | Film Group | 1 |
195-0769 Shear Ar-Hydraulic
| 19***69 | Shear Ar-Hydraulic | 1 |
| 19***73 | Film Group | 1 |
| 19***74 | Shear Group-Hydraulic | 1 |
197-7181 Shear Ar-Hydraulic
| 19***81 | Shear Ar-Hydraulic | 1 |
| 19***83 | Film Group | 1 |
| 19***85 | Shear Group-Hydraulic | 1 |
177-3354 Shear Ar-Hydraulic
| 17***53 | Film Group | 1 |
| 17***54 | Shear Ar-Hydraulic | 1 |
| 17***56 | Kit-Maintenance | 1 |
171-5495 Shear Ar-Hydraulic
| 17***95 | Shear Ar-Hydraulic | 1 |
| 17***64 | Film Group | 1 |
| 18***25 | Kit-Maintenance | 1 |
Work Tools
169-4974 Bracket Gp-Mounting
| 16***74 | Bracket Group-Mounting | 1 |
| 16***93 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
200-7802 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***02 | Bracket Group-Mounting | 1 |
| 20***08 | Bracket Group-Mounting | 1 |
169-4981 Bracket Gp-Mounting
| 16***81 | Bracket Group-Mounting | 1 |
| 16***99 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
201-5015 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***13 | Bracket Group-Mounting | 1 |
| 20***15 | Bracket Group-Mounting | 1 |
276-7982 Bracket Gp-Mounting
| 15***97 | Seal-Lip Type | 2 |
| 19***46 | Insert | 1 |
| 26***24 | Bearing-Sleeve | 2 |
257-1047 Bracket Gp-Mounting
| 14***33 | Boss-Tapped; (Tapped) | 1 |
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
318-8150 Bracket Gp-Mounting
| 17***09 | Edge-Cutting | 2 |
| 17***10 | Edge-Cutting | 2 |
| 17***11 | Cutter | 1 |
199-1258 Bracket Gp-Mounting
| 13***17 | Bearing-Sleeve; (116.23mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
169-4967 Bracket Gp-Mounting
| 16***67 | Bracket Group-Mounting | 1 |
| 16***86 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
318-4863 Bracket Gp-Mounting
| 13***17 | Bearing-Sleeve; (116.23mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
175-3014 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***14 | Bracket Group-Mounting | 1 |
| 17***51 | Bracket Group-Mounting | 1 |
291-4097 Bracket Gp-Mounting
| 15***19 | Lockwasher | 8 |
| 29***97 | Bracket Group-Mounting | 1 |
| 29***22 | Bracket As | 1 |
200-7807 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 20***07 | Bracket Group-Mounting | 1 |
200-7506 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 16***97 | Plate-Cover | 1 |
200-7801 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***01 | Bracket Group-Mounting | 1 |
| 20***07 | Bracket Group-Mounting | 1 |
254-4463 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***71 | Washer; (26x90x8-mm Thk) | 2 |
| 25***63 | Bracket Group-Mounting | 1 |
202-0285 Bracket Gp-Mounting
| 17***61 | Cover | 2 |
| 20***84 | Bracket As | 1 |
| 20***85 | Bracket Group-Mounting | 1 |
247-0536 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***21 | Lockwasher | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
200-7800 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***00 | Bracket Group-Mounting | 1 |
| 20***06 | Bracket Group-Mounting | 1 |
198-7615 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 19***15 | Bracket Group-Mounting | 1 |
| 19***16 | Bracket Group-Mounting | 1 |
231-7270 Bracket Gp-Mounting
| 09***12 | Bearing-Sleeve | 2 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
169-4971 Bracket Gp-Mounting
| 16***71 | Bracket Group-Mounting | 1 |
| 16***91 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
246-9991 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 24***91 | Bracket Group-Mounting | 1 |
179-1651 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 17***18 | Bracket As | 1 |
200-7811 Bracket Gp-Mounting
| 09***34 | Shim; (T=69.85mm) | 2 |
| 11***82 | Bearing-Sleeve | 2 |
| 15***19 | Lockwasher | 16 |
299-0293 Bracket Gp-Mounting
| 14***33 | Boss-Tapped; (Tapped) | 1 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
169-4969 Bracket Gp-Mounting
| 16***69 | Bracket Group-Mounting | 1 |
| 16***89 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
283-4186 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 28***86 | Bracket Group-Mounting | 2 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
245-8009 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 20***59 | Plate-Serial Number | 1 |
256-3108 Bracket Gp-Mounting
| 14***33 | Boss-Tapped; (Tapped) | 1 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
179-1654 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***15 | Bracket As | 1 |
| 16***97 | Plate-Cover | 1 |
199-7008 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 19***07 | Bracket Group-Mounting | 1 |
| 19***08 | Bracket Group-Mounting | 1 |
248-7980 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 24***80 | Bracket Group-Mounting | 1 |
267-6102 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 26***02 | Bracket Group-Mounting | 2 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 36 |
253-7830 Bracket Gp-Mounting
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
175-0341 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***41 | Bracket Group-Mounting | 1 |
| 17***48 | Bracket As | 1 |
231-8154 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 23***54 | Bracket Group-Mounting | 1 |
| 23***76 | Bracket Group-Mounting | 1 |
222-8507 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 22***07 | Bracket Group-Mounting | 1 |
| 22***13 | Bracket Group-Mounting | 1 |
169-4980 Bracket Gp-Mounting
| 16***80 | Bracket Group-Mounting | 1 |
| 16***98 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
197-5353 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
| 19***53 | Bracket Group-Mounting | 1 |
291-1291 Bracket Gp-Mounting
| 15***19 | Lockwasher | 8 |
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 22***89 | Bearing-Sleeve | 2 |
318-8149 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 31***49 | Bracket Group-Mounting | 1 |
267-6103 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 26***03 | Bracket Group-Mounting | 1 |
| 27***38 | Bracket As | 1 |
169-5307 Bracket Gp-Mounting
| 16***07 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***47 | Bracket Group-Mounting | 1 |
275-9776 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 27***76 | Bracket Group-Mounting | 1 |
| 27***83 | Bracket As | 1 |
169-4976 Bracket Gp-Mounting
| 16***76 | Bracket Group-Mounting | 1 |
| 16***96 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
287-6820 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 28***20 | Bracket Group-Mounting | 1 |
| 29***75 | Bracket Group-Mounting | 1 |
169-4968 Bracket Gp-Mounting
| 16***68 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 23***05 | Bracket As | 1 |
179-1647 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***19 | Bracket As | 1 |
| 16***97 | Plate-Cover | 1 |
175-0342 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***42 | Bracket Group-Mounting | 1 |
| 17***49 | Bracket As | 1 |
180-1286 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 18***86 | Bracket Group-Mounting | 1 |
| 19***94 | Bracket Group-Mounting | 1 |
199-7007 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 19***06 | Bracket As | 1 |
254-4039 Bracket Gp-Mounting
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***71 | Washer; (26x90x8-mm Thk) | 1 |
200-7804 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***04 | Bracket Group-Mounting | 1 |
| 20***10 | Bracket Group-Mounting | 1 |
222-8506 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 22***06 | Bracket Group-Mounting | 1 |
| 22***12 | Bracket Group-Mounting | 1 |
257-0102 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 25***02 | Bracket Group-Mounting | 1 |
| 25***47 | Bracket Group-Mounting | 1 |
283-4187 Bracket Gp-Mounting
| 15***97 | Seal-Lip Type | 2 |
| 19***46 | Insert | 1 |
| 26***24 | Bearing-Sleeve | 2 |
275-8137 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 27***37 | Bracket Group-Mounting | 1 |
| 27***77 | Bracket As | 1 |
283-4827 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 23***25 | Plate-Serial Number | 1 |
| 28***27 | Bracket Group-Mounting | 2 |
224-2477 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 22***77 | Bracket Group-Mounting | 1 |
201-9466 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***97 | Plate-Cover | 1 |
| 20***66 | Bracket Group-Mounting | 1 |
179-1646 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***97 | Plate-Cover | 1 |
| 17***45 | Bracket As | 1 |
257-0101 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 25***01 | Bracket Group-Mounting | 1 |
217-0996 Bracket Gp-Mounting
| 15***19 | Lockwasher | 18 |
| 17***61 | Cover | 2 |
| 21***96 | Bracket Group-Mounting | 1 |
200-7806 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 20***06 | Bracket Group-Mounting | 1 |
200-7809 Bracket Gp-Mounting
| 14***90 | Bearing-Sleeve; (140.26mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
201-5013 Bracket Gp-Mounting
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
233-4675 Bracket Gp-Mounting
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 13***59 | Bearing-Sleeve | 2 |
| 15***19 | Lockwasher | 16 |
257-0099 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 25***99 | Bracket Group-Mounting | 1 |
| 25***02 | Bracket Group-Mounting | 1 |
169-5312 Bracket Gp-Mounting
| 16***12 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***54 | Bracket Group-Mounting | 1 |
257-0098 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 25***98 | Bracket Group-Mounting | 1 |
198-7616 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 19***13 | Bracket As | 1 |
179-1653 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 17***16 | Bracket As | 1 |
208-4474 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 34 |
| 20***74 | Bracket Group-Mounting | 1 |
| 20***81 | Bracket Group-Mounting | 1 |
175-3012 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***12 | Bracket Group-Mounting | 1 |
| 17***53 | Bracket Group-Mounting | 1 |
193-9094 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
| 19***94 | Bracket Group-Mounting | 1 |
205-3920 Bracket Gp-Mounting
| 20***20 | Bracket Group-Mounting | 1 |
| 20***70 | Bracket As | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
199-1259 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 19***58 | Bracket Group-Mounting | 1 |
| 19***59 | Bracket Group-Mounting | 1 |
222-8511 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 22***11 | Bracket Group-Mounting | 1 |
231-5023 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 23***23 | Bracket Group-Mounting | 1 |
| 23***54 | Bracket Group-Mounting | 1 |
175-0338 Bracket Gp-Mounting
257-1041 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 25***41 | Bracket Group-Mounting | 1 |
304-9833 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 16 |
| 30***33 | Bracket Group-Mounting | 1 |
| 31***50 | Bracket Group-Mounting | 1 |
283-4828 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***19 | Lockwasher | 16 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-4978 Bracket Gp-Mounting
| 16***78 | Bracket Group-Mounting | 1 |
| 16***97 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-5308 Bracket Gp-Mounting
| 16***08 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***45 | Bracket Group-Mounting | 1 |
200-7805 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***05 | Bracket Group-Mounting | 1 |
| 20***11 | Bracket Group-Mounting | 1 |
197-7840 Bracket Gp-Mounting
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
| 19***39 | Bracket As | 1 |
249-3132 Bracket Gp-Mounting
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
222-8508 Bracket Gp-Mounting
| 13***17 | Bearing-Sleeve; (116.23mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
179-1645 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***18 | Bracket As | 1 |
| 16***97 | Plate-Cover | 1 |
200-7810 Bracket Gp-Mounting
| 09***34 | Shim; (T=69.85mm) | 2 |
| 11***82 | Bearing-Sleeve | 2 |
| 15***19 | Lockwasher | 16 |
304-9832 Bracket Gp-Mounting
| 30***32 | Bracket Group-Mounting | 1 |
| 31***64 | Bracket As | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
193-4497 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 19***97 | Bracket Group-Mounting | 1 |
| 20***66 | Bracket Group-Mounting | 1 |
291-5775 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 29***75 | Bracket Group-Mounting | 1 |
| 30***33 | Bracket Group-Mounting | 1 |
197-5352 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 48 |
| 19***52 | Bracket Group-Mounting | 1 |
| 19***53 | Bracket Group-Mounting | 1 |
222-8513 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 22***13 | Bracket Group-Mounting | 1 |
| 22***78 | Bracket Group-Mounting | 1 |
256-3109 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 25***09 | Bracket Group-Mounting | 1 |
| 25***99 | Bracket Group-Mounting | 1 |
233-4676 Bracket Gp-Mounting
| 23***76 | Bracket Group-Mounting | 1 |
| 24***32 | Bracket Group-Mounting | 1 |
224-2478 Bracket Gp-Mounting
| 14***66 | Bushing | 2 |
| 14***34 | Collar | 1 |
| 22***78 | Bracket Group-Mounting | 1 |
222-8512 Bracket Gp-Mounting
| 14***90 | Bearing-Sleeve; (140.26mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
336-0800 Bracket Gp-Mounting
| 14***87 | Screw-Flat Head | 2 |
| 14***75 | Bolt; (M20x2.5x75-Thd) | 6 |
| 16***85 | Edge-Cutting | 4 |
205-3923 Bracket Gp-Mounting
| 20***23 | Bracket Group-Mounting | 1 |
| 20***46 | Bracket As | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
201-5016 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***14 | Bracket Group-Mounting | 1 |
| 20***16 | Bracket Group-Mounting | 1 |
199-0719 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 16 |
| 19***40 | Bracket Group-Mounting | 1 |
| 19***19 | Bracket Group-Mounting | 1 |
208-4481 Bracket Gp-Mounting
| 13***17 | Bearing-Sleeve; (116.23mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 17***61 | Cover | 2 |
255-0001 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 25***01 | Bracket Group-Mounting | 1 |
| 25***09 | Bracket Group-Mounting | 1 |
202-0286 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 48 |
| 20***85 | Bracket Group-Mounting | 1 |
| 20***86 | Bracket Group-Mounting | 1 |
200-7808 Bracket Gp-Mounting
| 13***17 | Bearing-Sleeve; (116.23mm Od) | 2 |
| 15***19 | Lockwasher | 16 |
| 16***96 | Seal; (Id=99.85mm) | 2 |
201-5014 Bracket Gp-Mounting
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 15***19 | Lockwasher | 16 |
| 18***74 | Cover | 2 |
291-1266 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 29***66 | Bracket Group-Mounting | 1 |
| 29***97 | Bracket Group-Mounting | 1 |
200-7803 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 20***03 | Bracket Group-Mounting | 1 |
| 20***09 | Bracket Group-Mounting | 1 |
222-3345 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 16 |
| 22***45 | Bracket Group-Mounting | 1 |
| 22***11 | Bracket Group-Mounting | 1 |
169-5311 Bracket Gp-Mounting
| 16***11 | Bracket Group-Mounting | 1 |
| 16***16 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-4970 Bracket Gp-Mounting
| 16***70 | Bracket Group-Mounting | 1 |
| 16***90 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
171-5499 Edge Gp-Cutting
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 12 |
| 14***87 | Screw-Flat Head | 3 |
| 16***85 | Edge-Cutting | 1 |
184-7651 Edge Gp-Cutting
| 14***66 | Screw-Flat Head; (M24x3x160-mm) | 9 |
| 14***25 | Screw-Flat Head | 9 |
| 17***81 | Edge-Cutting | 1 |
217-1413 Edge Gp-Cutting
| 11***30 | Bolt-Socket Head; (M20x2.5x150-mm) | 4 |
| 14***78 | Lockwasher | 4 |
| 21***13 | Edge Group-Cutting | 1 |
234-9152 Edge Gp-Cutting
| 19***00 | Bar | 1 |
| 23***52 | Edge Group-Cutting | 1 |
| 8T***89 | Locknut; (M10x1.15-Thd) | 2 |
217-1412 Edge Gp-Cutting
| 14***78 | Lockwasher | 3 |
| 17***80 | Bolt-Socket Head; (M20x2.5x120-mm) | 3 |
| 21***12 | Edge Group-Cutting | 1 |
236-2204 Edge Gp-Cutting
| 20***86 | Plate-Lock | 2 |
| 23***04 | Edge Group-Cutting | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
234-1339 Edge Gp-Cutting
| 14***78 | Lockwasher | 3 |
| 17***93 | Bolt-Socket Head; (M20x2.5x80-mm) | 3 |
| 22***49 | Plate-Wear | 1 |
197-7455 Edge Gp-Cutting
| 11***30 | Bolt-Socket Head; (M20x2.5x150-mm) | 4 |
| 14***66 | Screw-Flat Head; (M24x3x160-mm) | 9 |
| 14***25 | Screw-Flat Head | 9 |
177-3359 Edge Gp-Cutting
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 14 |
| 14***81 | Screw-Flat Head | 3 |
| 16***85 | Edge-Cutting | 1 |
217-1410 Edge Gp-Cutting
| 14***87 | Screw-Flat Head | 2 |
| 14***75 | Bolt; (M20x2.5x75-Thd) | 6 |
| 15***21 | Lockwasher | 3 |
195-0780 Edge Gp-Cutting
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 7 |
| 14***87 | Screw-Flat Head | 7 |
| 16***74 | Shim; (0.5-mm Thk) | 10 |
196-2023 Edge Gp-Cutting
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 7 |
| 14***87 | Screw-Flat Head | 7 |
| 14***78 | Lockwasher | 3 |
216-7648 Edge Gp-Cutting
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 12 |
| 14***87 | Screw-Flat Head | 3 |
| 15***21 | Lockwasher | 3 |
197-7185 Shear Gp-Hydraulic
| 17***26 | Rotator Group-Hydraulic | 1 |
| 19***77 | Housing Group-Shear | 1 |
| 19***85 | Shear Group-Hydraulic | 1 |
197-3844 Shear Gp-Hydraulic
| 19***44 | Shear Group-Hydraulic | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
| 8T***75 | Bolt; (M16x2x90-mm) | 1 |
197-3520 Shear Gp-Hydraulic
| 19***20 | Shear Group-Hydraulic | 1 |
| 20***17 | Plate-Lock | 2 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
196-2017 Shear Gp-Hydraulic
| 19***17 | Shear Group-Hydraulic | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
| 8T***75 | Bolt; (M16x2x90-mm) | 1 |
199-8930 Shear Gp-Hydraulic
| 19***68 | Rotator Group-Hydraulic | 1 |
| 19***19 | Housing Group-Shear | 1 |
| 19***30 | Shear Group-Hydraulic | 1 |
195-0774 Shear Gp-Hydraulic
| 19***74 | Shear Group-Hydraulic | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
| 8T***75 | Bolt; (M16x2x90-mm) | 1 |
Frequently asked questions
What engine does the Caterpillar S340 shear have?
The S340 has no engine of its own. It is a passive hydraulic work tool that draws all clamp, cut, and rotation power from the hydraulic system of the carrier excavator it is mounted to.
What is the operating weight of the Caterpillar S340?
In stick-mount configuration the S340 weighs about 4,250 kg (9,371 lb) including its mounting bracket. Exact weight varies by mounting configuration and bracket selection.
What replaced the Caterpillar S340 shear?
Caterpillar's later B-series shear line, including the S340B, updated the jaw geometry and carrier compatibility for newer excavator platforms. The original S340 was not formally discontinued outright and continued serving alongside the B-series shears; both generations remain active in the used and parts market.
What S340 owners discuss
How much wear can I expect on the S340's jaw knives before they need attention?
The S340 uses reversible main, side, and front knives with four usable cutting edges apiece, so the first service step is indexing or flipping the blade rather than swapping it outright. Once every edge is dull, pull the set and either regrind or replace. On mixed ferrous scrap, a blade set commonly stays serviceable for roughly 400-800 hours before the last edge goes dull, though heavy rebar or dirty, contaminated scrap shortens that considerably and varies by configuration and material mix. The heel plate under the knives is abrasion-resistant plate meant to be built up with weld rather than replaced outright, so a shear showing weld buildup on the heel is normal wear, not a red flag by itself.
Does the piercing tip wear differently than the rest of the jaw?
Yes. The tip takes the initial bite and absorbs snag and jamming loads whenever the jaw grabs an odd-shaped piece, so it chips and wears faster than the flat cutting edges. Check it every time you check the knives, not just at scheduled service. A tip that is visibly mushroomed, chipped, or has lost its original geometry should come off before it starts transmitting bending load back into the jaw casting.
The shear rotates fine but feels like it drifts or won't hold position - what's going on?
That points to swivel and rotator wear, not a carrier pump problem. The rotate function runs off its own hydraulic motor and swivel joint that lets the jaw spin continuously in either direction; over time the swivel seals wear and start bypassing internally, which shows up as drift or soft, spongy rotation instead of a firm stop. On this class of rotating attachment, swivel seals commonly start leaking or bypassing somewhere in the 4,000-6,000 hour range depending on duty cycle, and the swivel can usually be reworked in place without pulling the shear off the machine. A bypassing swivel can mask a bigger issue such as a worn motor or contaminated oil, so have your dealer verify swivel and motor condition before assuming a reseal alone fixes it.
What pin and bushing wear should I watch for at the mounting bracket?
The S340 mounts stick-side or boom-side through a bracket, either pinned directly to the stick or through a coupler. The main pivot pins and bushings there carry the full cutting reaction load, so listen and watch for a knock or visible play when the jaw works hard against material - that indicates the bushing bore going oval, not just a dry pin. Regreasing on interval keeps wear rate down; a shear run dry between greasings shows excess play well ahead of what the hour meter would suggest.
How long do the hydraulic hoses and cylinder seals typically last on this shear?
The shear runs entirely off the carrier's auxiliary circuit, so there is no onboard pump or reservoir to fail - the failure points are hose routing across the moving jaw and rotator joints, plus the main cutting cylinder seals. Hoses routed across the rotator or through the jaw pivot chafe and fail first because they flex every cycle; leaving enough slack and keeping clamps intact is the main preventive step. Cylinder seal life depends heavily on staying within the shear's rated pressure - feeding it a carrier circuit set too high accelerates seal wear and can blow a seal well ahead of a normal service interval.
Is it normal to see weld repairs or hairline cracks near the jaw pivot area?
Some weld repair on the jaw pivot lugs and heel area is common over a working shear's life - the design puts the highest cyclic stress right at the jaw hinge and pivot bosses, and that is where fatigue cracking shows up first if it develops. A small, properly prepped and welded repair is not automatically disqualifying, but a crack that runs into the pivot bore itself, or repeated cracking in the same spot, points to a structural issue rather than routine wear. Because this affects the load path holding the jaw together under cutting force, have your dealer verify any crack repair or suspect area before returning the shear to heavy service.
What should I check before buying a used S340?
Work through it in order: knife condition (how many usable edges remain on each reversible blade, and whether the heel plate has been built up repeatedly), piercing tip condition (chipped, mushroomed, or already replaced), pin and bushing play at both the jaw pivot and the mounting bracket, and rotator behavior (cycle it full speed in both directions and watch for drift, hesitation, or noise). Inspect the housing and jaw structure for crack repairs, especially near the pivot bosses and cylinder mounts, and ask which carrier(s) it ran on - a shear fed hydraulic flow or pressure outside its rated range shows accelerated cylinder and swivel wear even when the jaws still look good. Pull maintenance records if available, and have your dealer verify jaw pivot bore condition and cylinder seal integrity before committing, since both are costly to put right after the fact.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific S340 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.