Caterpillarengine - generator setgen set engine
Caterpillar PP3516
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar PP3516 is a diesel engine-generator power package built around the Cat 3516/3516B V16 engine, a 69 L (4,211 cu in) turbocharged-aftercooled diesel with a 170 mm x 190 mm (6.7 in x 7.5 in) bore and stroke. It runs under the PPS serial-number prefix with an EMCP 3.3 control group, and was offered in prime and standby ratings across 50 Hz and 60 Hz, multiple voltage configurations, and open-skid or enclosed builds. Cat has not published a standalone PP3516 weight figure; comparable 3516B generator sets in this power class weigh roughly 14,000-16,000 kg (31,000-35,000 lb) dry, and the PP3516's exact weight varies by rating, alternator, and enclosure. The package traces to earlier 3516 power modules from the 1980s, with the 3516B block introduced in the late 1990s and the PP3516 configuration itself appearing around 2001.
Across the 3516 engine family, Caterpillar moved from the base 3516 to the 3516B with tighter fuel control and lower emissions, then to the 3516C and 3516E with more advanced electronics and further emissions compliance; the PP3516's fuel and control systems track the 3516B generation. Caterpillar has since shifted its portable and rental power packages toward the XQ series, including a 3516B-based portable module, while fixed generator sets moved on to 3516C and 3516E platforms. In the used and parts market, PP3516 units stay active because the underlying 3516B V16 remains in wide service across drilling, rental, and prime-power fleets, and its major components share commonality with the broader 3512B/3516B engine family, which keeps parts supply and rebuild support available well after new-unit production moved on.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar PP3516 specifications
Engine
| Base engine | Cat 3516 diesel, V-16, four-stroke-cycle |
| Bore x stroke | 170 mm x 190 mm (6.7 in x 7.5 in) |
| Displacement | 69 L (4210 in3) |
| Generator set control | EMCP 3.3 control group (per parts records tied to this serial range) |
| Gross/net power rating | Not published under this power-package designation; verify against the unit data plate. The parent 3516 diesel genset platform spans roughly 1450-2000+ ekW/bkW depending on generation (3516/3516B/3516C/3516E) and rating class (standby/prime/continuous), so a figure cannot be assigned to this unit without contamination risk |
| Emissions tier | Not documented for this designation |
Weights
| Operating weight | Not published for this power package; not listed on equipment spec databases or dealer pages under this designation |
| Shipping weight | Not published for this power package |
| Ground pressure | Not applicable — stationary/skid-mounted engine-generator power package, no undercarriage |
Dimensions
| Transport length/width/height | Not published for this power package |
| Skid/base footprint | Not documented in available sources |
| Ground clearance | Not applicable to this configuration |
Performance
| Rated speed | Not confirmed for this specific unit; the 3516 engine family commonly runs 1500 rpm at 50 Hz or 1800 rpm at 60 Hz, but this cannot be confirmed as this unit's setting |
| Voltage/frequency output | Not published for this designation — confirm against the generator end nameplate |
| Travel/drawbar/gradeability | Not applicable — this is a stationary engine-generator set, not a mobile machine |
Service capacities (summary)
| Fuel tank | Not published for this power package |
| Cooling system | Radiator-mounted fan cooling confirmed as an available configuration for this unit; capacity not published |
| Engine oil | Not published for this power package |
| Hydraulic system | Not applicable — no hydraulic system on this engine-generator package |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PP3516 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (lube oil system, with filter) | approx. 405 L (107 US gal) | Cat DEO (Diesel Engine Oil). SAE 10W30 for ambient -18C to 40C (0F to 104F); SAE 15W40 for -9.5C to 50C (15F to 122F). Full synthetic Cat DEO-ULS SYN or Cat DEO SYN preferred below -30C for cold-start flow and high-temp durability. |
| Cooling system (jacket water and module/radiator circuit) | varies by configuration/series: approx. 233 L (61.6 US gal) engine jacket-water only on radiator-cooled drilling-module trims, up to 330-480 L (87-127 US gal) for the full module/radiator circuit on offshore and generator-set trims | Cat ELC (Extended Life Coolant), premixed or concentrate mixed per OMM ratio. Organic acid corrosion-inhibitor technology, no supplemental coolant additive required at standard intervals; use only coolant meeting Cat EC-1 spec, do not mix with conventional low-silicate antifreeze. |
| Fuel tank / day tank | no single factory refill spec in the OMM - base or day-tank sizing is set at the skid/installation level; documented base tanks on 3516-family power packages and generator sets span roughly 750 L (200 US gal) up into the multi-thousand-liter range on larger skids | No. 2-D diesel fuel (or equivalent) meeting Cat's fuel specification; use ultra-low-sulfur diesel where required by emissions certification. |
| Hydraulic system and tank | not applicable - PP3516 is an engine-generator power package; fan, water pump, and lube pump are gear/belt driven off the engine with no separate hydraulic circuit documented | not applicable |
| Transmission / powertrain compartment | not applicable - stationary skid-mounted power package, no transmission fitted | not applicable |
| Final drives (each) | not applicable - no final drives on this power package | not applicable |
| Axles / differentials | not applicable - no axles on this power package | not applicable |
| Grease points (spec only) | per grease point, no bulk refill capacity specified | Cat Advanced 3Moly Grease (NLGI 2 multipurpose extreme-pressure grease) for bearings, linkages, and mounting hardware; standard Cat multipurpose grease is an acceptable alternate. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar PP3516 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 9,000 h |
|
| Every 24,000 h |
|
Servicing the PP3516 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled oil analysis on the 3516B's V16 crankcase ahead of the change interval; sump depth (shallow, standard, or deep) sets whether that change lands at 250, 500, or 1000 hours. Pull Level 1 coolant samples at 500 hours and Level 2 annually to track corrosion inhibitor depletion in the jacket-water circuit. Use the EMCP 3.3 panel's logged fault history to catch drifting oil pressure, coolant temperature, or boost trends before they trip a shutdown, especially on continuous-duty prime power and drilling-rig applications.
Corrective & Common Repairs
Common PP3516 fixes center on the 3516B's unit injectors and fuel priming after filter changes, turbocharger seal or boost-leak repairs, and EMCP 3.3 module faults from vibration or moisture ingress on skid-mounted rental units. Battery charger and starting motor issues surface on standby duty where the set sits idle between calls. Radiator core plugging and fan drive belt wear recur on open-skid configurations run in dusty oilfield or drilling environments; keep spare belts and hose clamps on hand.
Overhaul & Rebuild Points
Plan a top-end overhaul on the V16 in roughly the 7,500-9,000 hour range, covering cylinder heads, valves, unit injectors, and turbocharger cartridges across both banks. Major overhaul, typically 22,500-27,000 hours depending on duty cycle and fuel quality, pulls the long block for crankshaft, liner, and bearing work along with generator bearing and rewind checks if insulation testing has trended down. Log crankshaft vibration damper condition at each teardown; a failed damper on this displacement engine drives secondary crank and gear-train damage.
Seasonal & Environment Servicing
Open-skid PP3516 packages common to drilling and rental fleets need extra radiator cleaning and precleaner service in dusty or sandy sites, plus tighter air filter checks than the standard interval. In cold climates, verify coolant glycol concentration and jacket-water heater function before shutdown periods to protect the V16 block from freeze cracking. In sustained hot-climate prime power duty, tighten the coolant sampling interval and watch fan drive belt life, since high ambient heat and dust load accelerate cooling system and belt wear on this configuration.
PP3516 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 5D-5957 | Seal-O-Ring | Fuel system service | Check fitment → |
| 6V-3907 | Seal-O-Ring | Fuel system service | Check fitment → |
| 5P-2645 | Elbow-Unfiltered Fuel From Adapter | Fuel system service | Check fitment → |
| 1R-0756 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 134-6307 | Filter Element As-Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PP3516 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 110-3 / 110-4 | Engine coolant temperature sensor circuit reading out of range (open circuit toward battery voltage, or shorted to ground) | Damaged or corroded sensor connector, chafed harness wire, or a failed coolant temperature sensor | Inspect the coolant temperature sensor connector and wiring for corrosion or damage, check sensor resistance against spec, replace the sensor if it is out of range |
| 168-1 / 168-2 | ECM system (battery) supply voltage reading low or erratic/intermittent | Weak or discharged starting battery, loose or corroded battery cable connections, failing charging alternator, poor ECM ground | Load-test the battery, clean and tighten battery and ground connections, check charging system output |
| 190-0 / 190-15 | Engine speed has exceeded the overspeed trip point programmed into the ECM; the control commands an immediate shutdown | Governor or fuel system malfunction, faulty magnetic speed pickup or wiring, sudden load rejection on the generator | Check the speed sensor gap and wiring before restart, verify governor/fuel setting calibration, do not attempt a restart until the overspeed cause is confirmed and cleared |
| 253-11 | ECM personality module (control programming) failure | Internal ECM fault, corrupted flash/configuration file, moisture intrusion at the ECM connector | Connect with the engine electronic service tool to confirm the fault, reflash or reprogram the module, replace the ECM if the fault persists |
| 262-3 / 262-4 | Shared 5-volt sensor supply circuit shorted to battery voltage or to ground; can cause several sensors on the same supply to read incorrectly at once | Chafed harness insulation, moisture-fouled connector, or a failed sensor pulling the shared supply down | Check all sensors fed by the 5-volt supply, isolate and repair the short in the harness before replacing any single sensor |
| 542-3 / 543-3 | Unfiltered or filtered engine oil pressure sensor circuit reading open or shorted toward battery voltage (a sensor/wiring fault, not necessarily an actual low-pressure event) | Failed oil pressure sensor, damaged sensor wiring or connector corrosion | Inspect the oil pressure sensor connector and wiring, test the sensor output, replace if out of specification; confirm actual oil pressure with a mechanical gauge if in doubt |
| 274-3 / 274-4 | Atmospheric (barometric) pressure sensor circuit shorted to battery voltage or to ground, affecting boost and fuel delivery calculations | Failed sensor or damaged sensor wiring | Inspect the sensor connector and harness, replace the sensor if its signal is out of range |
| 1-5 / 2-6 (cylinder injector) | Individual cylinder fuel injector solenoid circuit open (no continuity) or shorted | Failed injector solenoid winding, damaged injector wiring harness or connector | Check injector harness continuity and resistance, swap the suspect injector with a known-good one to confirm, replace the faulty injector |
| E100 (low oil pressure warning event) | Generator-set control panel warning-level event for oil pressure trending toward the low-pressure shutdown threshold | Low oil level, worn oil pump, clogged oil filter, or a failing pressure sensor | Check oil level and filter condition, monitor the trend on the control panel, investigate before it escalates to a shutdown-level fault |
| E017 (high coolant temperature warning event) | Generator-set control panel warning-level event for coolant temperature trending toward the high-temperature shutdown threshold | Low coolant level, blocked radiator or heat exchanger, failed thermostat, weak water pump | Check coolant level and cooling system airflow/water flow, verify thermostat operation before the condition escalates to shutdown |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PP3516 attachments & work tools
Work-tool attachments
PP3516 is an engine-generator power package, not an implement carrier. It has no bucket, blade, coupler, or ground-engaging work-tool line the way mobile construction equipment does.
Enclosure options
Offered as an open skid-mounted set or in a weatherproof, sound-attenuated enclosure. Attenuated versions on this power-module class are typically quoted around 75-85 dBA at 7 m, varies by configuration and enclosure vendor.
Mounting / transport arrangement
Packaged skid-mounted for stationary or rental duty, or trailer-mounted on a single- or multi-axle chassis for mobile power-module use. Axle count and chassis length vary with total package weight and job requirement.
Fuel tank arrangement
Mobile/rental packages commonly integrate a base (sub-base) fuel tank under the skid rather than a remote day tank. Capacity is not fixed for this model and varies by configuration.
Control / monitoring panel
Uses a Cat EMCP-series generator-set control panel for monitoring, protection, and start/stop sequencing, consistent with other sets in the 3516 generator-set family.
Paralleling / switchgear
Can be tied into Cat paralleling switchgear (EPIC/EGP-type systems) for multi-unit rental banks or prime-power installations. This is an external electrical add-on, not a bolt-on work tool.
Electrical output connection
Output is taken from a terminal/junction box or cam-lock/bus-bar connection point on the enclosure rather than a mechanical coupler. Exact connection hardware varies by enclosure builder and job spec.
Engine identity note
The PP3516 power package uses the 3516-family V16 diesel (3516B/3516C lineage); some manuals also list the related 3512B engine in the same family. Confirm the exact engine arrangement for a given serial range with your dealer.
All PP3516 assemblies by section
Every catalogued assembly group for the Caterpillar PP3516. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
113-1581 Air Cleaner Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 10***66 | Gear-Accessory Drive; (55-Teeth) | 1 |
7n-6782 Indicator Gp-Air Filter Change
| 12***88 | Shaft; (Stub) | 1 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
| 7N***82 | Indicator Group-Filter Change | 1 |
211-5184 Insulation Gp-Muffler
| 1N***42 | Gear-Starting Motor; (183-Teeth) | 1 |
| 21***84 | Insulation Group-Muffler | 1 |
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
115-3613 Mounting Gp-Air Cleaner
| 11***13 | Mounting Group-Air Cleaner | 1 |
| 23***43 | Gear-Flywheel; (183-Teeth) | 1 |
| 24***16 | Flywheel As | 1 |
208-6741 Muffler Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
Basic Engine
5r-7425 Barring Gp -Lh
| 03***31 | Bolt; (3/8-16x3.75-In)(Shield As. To Heads) | 4 |
| 17***47 | Film; (Reflective, Black, Yellow)(190cm) | 0 |
| 22***77 | Tread-Nonskid; (1050cm) | 0 |
253-2468 Barring Gp -Rh
| 25***68 | Barring Group; -Rh | 1 |
| 3R***37 | Device-Barring | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
Coupling Group
| 5N***78 | Plate As | 1 |
| 5N***79 | Shim .80mm(.031in)Thk | 3 |
153-0395 Coupling Gp-Generator
| 15***95 | Coupling Group-Generator | 1 |
| 3R***37 | Device-Barring | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
201-0549 Drain Gp-Engine Oil -Front
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
212-4694 Drive Gp-Fan
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
151-9228 Guard Gp-Belt -Alternator
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 12***60 | Camshaft As; (Rear, Rh) | 1 |
| 12***61 | Camshaft As; (Rear, Lh) | 1 |
197-9052 Guard Gp-Damper
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
Cooling System
236-8821 Connection Gp-Water -Lh
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
213-8606 Drain Gp-Coolant
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
214-4767 Lines Gp-Vent
| 14***40 | Damper Group | 1 |
| 1N***82 | Adapter | 1 |
| 21***67 | Lines Group-Vent | 1 |
213-3438 Radiator Gp
| 21***38 | Radiator Group | 1 |
| 3B***70 | Nipple,Pipe Hose To Flange | 1 |
| 3B***45 | Nipple-Pipe; (3/4-14 Npt Thd)(Both Ends) | 1 |
213-3437 Radiator Gp
| 15***63 | Washer; (10.35x16x2-mm Thk) | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
| 21***37 | Radiator Group | 1 |
198-4865 Support Gp-Water Lines
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 12***00 | Bearing-Sleeve | 1 |
Electrical And Starting System
270-0476 Adapter Gp-Communication -Modbus
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
131-0832 Battery Charger Gp
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
195-6171 Battery Charger Gp
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 19***71 | Battery Charger Group | 1 |
178-3323 Battery Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
195-6170 Battery Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
6i-3164 Battery Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
122-1194 Box & Mounting Gp -Cable Access
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
357-3040 Box & Mounting Gp -Cable Access
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 10***77 | Retainer-Spring | 1 |
236-2104 Box Gp-Control -Overspeed
| 00***99 | Connector-Flared | 1 |
| 11***36 | Valve As-Shutoff; (Jacket Water Heater) | 1 |
| 21***49 | Hose As | 1 |
234-8721 Box Gp-Control -Overspeed
| 03***31 | Seal-O-Ring | 4 |
| 10***99 | Cover As | 4 |
| 18***07 | Clamp-Hose | 2 |
216-7933 Box Gp-Extension Terminal -Circuit Breaker
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
361-2595 Box Gp-Extension Terminal
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
| 14***27 | Nut; (3/8-16-Thd) | 2 |
| 20***24 | Nut-Spring | 4 |
115-2513 Box Gp-Extension Terminal -Circuit Breaker
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 2W***52 | Gasket | 1 |
264-0589 Box Gp-Generator Connection
| 15***96 | Tube As | 2 |
| 26***89 | Box Group-Generator Connection | 1 |
| 5P***97 | Clamp Fumes Disposal | 2 |
141-1809 Box Gp-Generator Connection
| 14***09 | Box Group-Generator Connection | 1 |
| 14***27 | Nut; (3/8-16-Thd) | 2 |
| 3P***47 | Clamp | 6 |
357-3045 Box Gp-Generator Connection
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 35***45 | Box Group-Generator Connection | 1 |
| 4B***40 | Cover; (Prelubrication) | 1 |
102-6843 Box Gp-Terminal
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
252-7458 Bus Bar As
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
122-0332 Cable Gp -Circuit Breaker Connection
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 20 |
252-7538 Circuit Breaker & Mounting Gp
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
252-7537 Circuit Breaker & Mounting Gp
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
252-7539 Circuit Breaker & Mounting Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 10***67 | Shaft As-Idler; (12-Teeth) | 2 |
252-7534 Circuit Breaker & Mounting Gp
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 20 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
105-7935 Circuit Breaker As
| 10***35 | Circuit Breaker As | 1 |
| 10***72 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 1B***73 | Bolt 8.50 In.(215.90 mm) Long | 3 |
252-7533 Circuit Breaker Gp
| 20***85 | Box As | 1 |
| 20***44 | Screen | 1 |
| 20***05 | Filter; (Fumes Disposal) | 1 |
252-7532 Circuit Breaker Gp
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
252-7531 Circuit Breaker Gp
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
252-7530 Circuit Breaker Gp
| 00***94 | Key | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 9 |
105-7929 Circuit Breaker Gp
| 00***94 | Key | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 9 |
211-4369 Conduit Gp-Electrical
| 11***11 | Hose As | 2 |
| 11***34 | Tank As; (Oil) | 1 |
| 13***05 | Valve | 1 |
211-4370 Conduit Gp-Electrical
| 21***70 | Conduit Group-Electrical | 1 |
| 7X***87 | Valve As-Fluid Sampling; (Oil Cooler) | 1 |
| 8C***45 | Cap-Dust; (Engine Oil Quick Disconnect) | 1 |
278-7705 Connection Gp-Electrical
| 14***62 | Seal-O-Ring | 1 |
| 21***77 | Pump Group-Water | 1 |
| 27***05 | Connection Group-Electrical | 1 |
257-9401 Connection Gp-Electrical
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
| 23***46 | Seal-O-Ring | 1 |
121-9638 Connection Gp-Electrical -Basic
| 00***70 | Nipple-Strainer To Flange | 2 |
| 11***56 | Bushing-Reducer | 1 |
| 12***38 | Connection Group-Electrical; -Basic | 1 |
121-8856 Connection Gp-Electrical
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
248-4020 Connection Gp-Electrical -Terminal Block, Switchgear
| 00***40 | Connector; (Flared) | 1 |
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 21***21 | Hose As | 1 |
248-4059 Connection Gp-Electrical -Terminal Block, Discrete I/O
| 03***78 | Connector-Filtered Fuel To Adapter | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
249-4057 Connection Gp-Electrical
| 03***78 | Connector-Filtered Fuel To Adapter | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
253-3811 Connection Gp-Electrical -Terminal Block, Thermocouple
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 12***00 | Bearing-Sleeve | 1 |
253-3812 Connection Gp-Electrical -Terminal Block, Thermocouple
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***32 | Seal-O-Ring; (234.54mm Id) | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
263-8920 Connection Gp-Electrical
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***79 | Shaft; (14-Teeth) | 1 |
248-4019 Connection Gp-Electrical -Terminal Block, Discrete I/O
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 21***28 | Housing | 1 |
| 21***29 | Adapter | 1 |
276-4847 Connection Gp-Electrical -Resistive Temperature Device
| 16***78 | Pump Group-Water; -Jacket Water | 1 |
| 1H***78 | Seal-O-Ring | 1 |
| 27***47 | Connection Group-Electrical; -Resistive Temperature Device | 1 |
121-9640 Connection Gp-Electrical -Rtd
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***32 | Seal-O-Ring | 2 |
| 12***40 | Connection Group-Electrical; -Rtd | 1 |
264-0587 Connection Gp-Electrical -Rtd
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***79 | Shaft; (14-Teeth) | 1 |
248-4018 Connection Gp-Electrical -Terminal Block, Switchgear
| 12***62 | Regulator-Water Temperature; (41-Deg C) | 2 |
| 1Y***62 | Washer; (0.328x0.81x0.125-In Thk) | 2 |
| 24***18 | Connection Group-Electrical; -Terminal Block, Switchgear | 1 |
248-4023 Connection Gp-Electrical -Terminal Block, Rtd
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 38 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 62 |
| 11***75 | Housing; (Regulator) | 1 |
278-7734 Connection Gp-Electrical
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
248-2563 Connection Gp-Electrical -Terminal Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***74 | Valve As-Vent Line | 1 |
| 24***63 | Connection Group-Electrical; -Terminal Block | 1 |
248-4058 Connection Gp-Electrical -Terminal Block, Rtd
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
248-4024 Connection Gp-Electrical -Terminal Block, Discrete I/O
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
248-2562 Connection Gp-Electrical -Terminal Block
| 00***99 | Connector-Flared | 3 |
| 11***36 | Valve As-Shutoff; (Jacket Water Heater) | 3 |
| 11***77 | Valve; (Hydraulic Tank Shutoff) | 2 |
248-4021 Connection Gp-Electrical -Terminal Block, Discrete I/O
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
249-7649 Connector As -Resistive Temperature Device
| 12***13 | Flange | 1 |
| 1S***72 | Gasket | 1 |
| 20***84 | Bolt; (3/4-10x2.25-In) | 8 |
247-0787 Connector As -Thermocouple
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
276-4840 Contactor Gp -Jacket Water Heater
| 27***40 | Contactor Group; -Jacket Water Heater | 1 |
237-1971 Contactor Gp-Generator -Jacket Water Heater
| 19***59 | Clamp | 2 |
| 19***61 | Plate | 1 |
| 19***62 | Bracket As | 1 |
249-1168 Control & Mtg Gp-Engine Elek
| 10***58 | Seal; (Aftercooler) | 4 |
| 11***59 | Core As-Aftercooler | 2 |
| 24***68 | Control & Mtg Group-Engine Elek | 1 |
5n-0591 Control Gp-Manual Voltage
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
| 5L***33 | Fitting (To Air Cleaner) | 2 |
| 5N***91 | Control Group-Electronic | 1 |
9y-6496 Module Gp-Interface
| 22***78 | Switch; (Fuel Level) | 1 |
| 22***79 | Solenoid; (Fuel) | 1 |
| 22***80 | Valve; (Fuel) | 1 |
247-9823 Control Gp-Ether Electronic
| 11***78 | Filter Element As-Air; (Primary) | 1 |
| 11***19 | Housing As-Air Cleaner | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 2 |
9x-9591 Converter Gp-Electrical
| 14***96 | Insulation As | 2 |
| 15***69 | Insulation As | 2 |
| 21***83 | Insulation; (13.5-In Flange) | 2 |
Electronics Group-Engine
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 26***57 | Film-Certification; (Emcp 3) | 1 |
307-3276 Element Gp-Jacket Water Heater
| 10***79 | Sleeve-Elbow Support | 2 |
| 11***30 | Manifold-Exhaust; (Intermediate) | 2 |
| 11***31 | Manifold-Exhaust; (Intermediate) | 2 |
249-1172 Fastener Gp-Wiring Harness
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 16 |
| 13***80 | Gasket | 2 |
| 19***83 | Flange As-Exhaust | 1 |
249-1171 Fastener Gp-Wiring Harness
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
357-3041 Frame Gp-Generator Connection
| 12***36 | Gasket; (Turbocharger) | 4 |
| 24***39 | Turbocharger Group | 4 |
| 24***09 | Coupling-Elbow | 4 |
128-1479 Frame Gp-Generator Connection
277-8798 Harness As-Panel -Engine Sensors
| 14***26 | Governor Group-Electronic | 1 |
| 27***98 | Harness As-Panel; -Engine Sensors | 1 |
187-6147 Harness As-Panel
| 18***47 | Harness As-Panel | 1 |
250-1113 Harness As-Panel -Generator Terminal Strip
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1N***95 | Spring | 1 |
252-6838 Harness As-Panel -Engine Sensors
| 12***85 | Harness As-Engine; -Governor | 1 |
| 12***70 | Potentiometer; (10,000-Ohm)(Voltage Adjustment) | 1 |
| 13***59 | Control As-Governor; -Load Share | 1 |
250-1116 Harness As-Panel -Internal Components
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 11***55 | Block-Sensor Mounting | 1 |
187-6146 Harness As-Panel
| 18***46 | Harness As-Panel | 1 |
| 20***50 | Cover-Compressor | 1 |
| 24***18 | Cartridge Group-Turbocharger | 1 |
187-6145 Harness As-Panel
| 10***98 | Housing; (Turbine) | 1 |
| 18***45 | Harness As-Panel | 1 |
| 20***55 | Cartridge Group-Turbocharger | 1 |
250-1112 Harness As-Panel -Control
| 25***12 | Harness As-Panel; -Control | 1 |
242-9752 Harness As-Power -Digital Voltage Regulator
| 06***46 | Connector-Flared | 2 |
| 11***36 | Valve As-Shutoff; (Jacket Water Heater) | 1 |
| 21***53 | Hose As | 1 |
187-6151 Harness As-Sensor -Engine
| 00***01 | Elbow (To Serial No 1md225) | 2 |
| 03***58 | Elbow-Flared | 2 |
| 06***46 | Connector-Flared | 3 |
264-1457 Harness As-Sensor
| 06***46 | Connector-Flared | 3 |
| 17***47 | Film; (Reflective, Black, Yellow)(190cm) | 0 |
| 21***53 | Hose As | 1 |
242-3100 Harness As-Wiring -Generator Terminal Strip
| 10***37 | Grommet | 16 |
| 14***45 | Washer-Retaining | 8 |
| 15***48 | Clamp | 8 |
240-6834 Harness As-Wiring -Emcp Ii
| 10***37 | Grommet | 16 |
| 14***45 | Washer-Retaining | 8 |
| 15***48 | Clamp | 8 |
242-3104 Harness As-Wiring -Generator Terminal Strip
| 17***78 | Support As | 2 |
| 18***27 | Block | 2 |
| 24***04 | Harness As-Wiring; -Generator Terminal Strip | 1 |
240-6833 Harness As-Wiring -Ignition, Lh
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***77 | Adapter | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
243-4271 Harness As-Wiring -Generator Terminal Strip
| 15***56 | Injector Group-Fuel | 1 |
| 19***84 | Seal-O-Ring | 1 |
| 23***82 | Plug | 1 |
264-1459 Harness As-Wiring
| 23***82 | Plug | 1 |
| 24***07 | Seal-O-Ring | 1 |
| 24***08 | Seal-O-Ring | 1 |
178-2964 Harness As-Wiring -Alarm
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***77 | Adapter | 1 |
| 03***82 | Union-Flared | 1 |
209-7551 Harness As-Wiring -Shunt Trip
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 3 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***77 | Adapter | 1 |
166-7153 Heater Gp-Battery
| 16***53 | Heater Group-Battery | 1 |
| 16***15 | Pump Group-Fuel Transfer | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
166-7152 Heater Gp-Battery
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 10***34 | Grommet | 2 |
165-9207 Heater Gp-Battery
| 16***07 | Heater Group-Battery | 1 |
| 23***57 | Injector Group-Fuel | 1 |
| 23***82 | Plug | 1 |
165-9208 Heater Gp-Battery
| 06***39 | Seal-O-Ring | 1 |
| 16***06 | Pump As-Fuel Priming | 1 |
| 16***08 | Heater Group-Battery | 1 |
7e-6248 Heater Gp-Jacket Water
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
| 16***17 | Seal-Lip Type; (Outer) | 1 |
307-3268 Heater Gp-Jacket Water
| 13***07 | Filter Element As-Fuel; (Water Separator) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
7e-6247 Heater Gp-Jacket Water
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
| 22***60 | Pump Group-Fuel Transfer | 1 |
264-1451 Heater Gp-Jacket Water
| 23***73 | Separator Group-Water; -Primary Fuel Filter | 1 |
| 26***51 | Heater Group-Jacket Water | 1 |
| 5P***20 | Hose (Radiator Overflow) 125cm (49.213in) | 0 |
235-1224 Heater Gp-Jacket Water
| 23***24 | Heater Group-Jacket Water | 1 |
| 4P***80 | Separator Group-Water | 1 |
| 5P***20 | Hose (Radiator Overflow) 125cm (49.213in) | 0 |
200-6504 Heater Gp-Jacket Water
| 13***07 | Filter Element As-Fuel; (Water Separator) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 20***04 | Heater Group-Jacket Water | 1 |
214-5869 Lighting Gp-Flood
| 21***69 | Lighting Group-Flood | 1 |
| 22***71 | Tank Group-Fuel | 1 |
| 8T***94 | Washer; (3/4 Hardened) (Current Adapters) | 4 |
Module Group-System Communication
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 10***37 | Film-Display; (Communication Module) | 1 |
| 10***38 | Film-Interface; (Communication Module)(Rear) | 1 |
252-7525 Mounting Gp-Circuit Breaker
| 13***72 | Fuse; (12-Ampere) | 1 |
| 13***74 | Fuse; (15-Ampere) | 1 |
| 13***75 | Fuse; (35-Ampere) | 1 |
122-0319 Mounting Gp-Circuit Breaker
| 12***19 | Mounting Group-Circuit Breaker | 1 |
| 14***27 | Nut; (3/8-16-Thd) | 3 |
| 19***56 | Elbow | 1 |
270-4654 Mounting Gp-Circuit Breaker
| 27***54 | Mounting Group-Circuit Breaker | 1 |
208-1195 Mounting Gp-Circuit Breaker
| 03***12 | Screw-Forming; (10-24x0.5-In) | 5 |
| 11***19 | Diode As-Alternator | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
122-3488 Mounting Gp-Circuit Breaker
| 12***88 | Mounting Group-Circuit Breaker | 1 |
| 27***75 | Adapter-Communication; (Modbus) | 1 |
235-1221 Mounting Gp-Jacket Wtr Heater -Lh
| 12***33 | Frame As-Box | 1 |
| 12***35 | Cover-Top | 1 |
| 12***36 | Cover-Bottom | 1 |
166-6652 Mounting Gp-Jacket Wtr Heater -Rh
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 15***53 | Cable-Electrical; (00-Ga, Red)(411-cm) | 0 |
| 15***54 | Cable-Electrical; (00-Ga, Black)(411-cm) | 0 |
134-3160 Mounting Gp-Jacket Wtr Heater -Lh
| 13***60 | Mounting Group-Jacket Wtr Heater; -Lh | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 2 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
264-1450 Mounting Gp-Jacket Wtr Heater
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***22 | Terminal; (Double) | 8 |
| 11***40 | Locknut; (3/4-14-Thd) | 1 |
141-1810 Mounting Gp-Transformer
| 14***10 | Mounting Group-Transformer | 1 |
| 1W***29 | Support | 1 |
| 23***21 | Box Group-Control; -Overspeed | 1 |
287-8033 Mounting Gp-Wiring
| 10***45 | Bolt-Flange Head; (5/16-18x0.625-In) | 10 |
| 12***34 | Cover As-Top | 1 |
| 12***35 | Frame As-Extension | 1 |
122-0317 Panel As-Box -Circuit Breaker
| 12***17 | Panel As-Box; -Circuit Breaker | 1 |
| 1D***72 | Bolt-Carriage; (1/2-13x5.5-In) | 6 |
| 5S***03 | Nut-Full; (5/16 X 18 Thd) | 6 |
252-7535 Panel Gp-Circuit Breaker -Cover
| 03***84 | Plug 12.7 mm(.50 In.) Dia. | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 18 |
307-9794 Cover-Extension Box
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 38 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
221-0752 Relay Gp -Space Heater
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 12***95 | Cable As-Extension | 24 |
| 22***52 | Relay Group; -Space Heater | 1 |
158-6181 Relay Gp
| 15***81 | Relay Group; -Engine Failure | 1 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 6 |
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 12 |
134-1157 Relay Gp -Engine Failure
| 13***57 | Relay Group; -Engine Failure | 1 |
| 15***21 | Box | 1 |
| 15***60 | Plate; (Stainless Steel) | 1 |
122-0335 Relay Gp -Space Heater
| 12***35 | Relay Group; -Space Heater | 1 |
| 14***09 | Box Group-Generator Connection | 1 |
264-0590 Relay Gp -Engine Failure
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 25***20 | Plate | 2 |
| 25***30 | Circuit Breaker Group | 1 |
141-4160 Sensor Gp-Temperature -Generator Bearing
| 14***60 | Sensor Group-Temperature; -Generator Bearing | 1 |
| 25***32 | Circuit Breaker Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 24 |
6i-4907 Sensor Gp-Temperature -Generator Bearing
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 25***20 | Plate | 2 |
| 25***31 | Circuit Breaker Group | 1 |
141-4158 Sensor Gp-Temperature -Generator Bearing
| 14***58 | Sensor Group-Temperature; -Generator Bearing | 1 |
| 25***31 | Circuit Breaker Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 18 |
6i-4906 Sensor Gp-Temperature -Generator Bearing
| 25***30 | Circuit Breaker Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 12 |
| 5S***83 | Capscrew; (Hex Hd) (3/8-16 Unc X 1.75 Gr8) | 6 |
141-4159 Sensor Gp-Temperature -Generator Bearing
| 14***59 | Sensor Group-Temperature; -Generator Bearing | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 25***20 | Plate | 2 |
138-1729 Starting Aid Gp -Switch
| 10***32 | Switch As-Auxiliary | 1 |
| 10***38 | Contactor-Shunt; (24-Vdc) | 1 |
| 10***69 | Handle | 1 |
264-0585 Starting Aid Gp
| 10***35 | Circuit Breaker As | 1 |
| 10***97 | Bar-Circuit Breaker; (3200-Ampere) | 1 |
| 10***98 | Bar-Circuit Breaker; (3200-Ampere) | 2 |
121-4718 Starting Aid Gp -Relay, Switch
| 10***97 | Bar-Circuit Breaker; (3200-Ampere) | 2 |
| 10***16 | Bar-Circuit Breaker; (3200-Ampere) | 3 |
| 10***18 | Bar-Circuit Breaker; (3200-Ampere) | 1 |
116-7994 Starting Aid Gp-Ether
| 11***94 | Starting Aid Group-Ether | 1 |
| 25***58 | Bus Bar As | 2 |
| 27***58 | Circuit-Breaker; (1600-Ampere) | 1 |
241-1725 Starting Aid Gp-Ether
| 24***25 | Starting Aid Group-Ether | 1 |
| 25***58 | Bus Bar As | 2 |
| 27***59 | Circuit-Breaker; (2000-Ampere) | 1 |
207-1556 Starting Motor Gp-Electric
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
| 25***57 | Bus As; (3200-Ampere) | 2 |
| 25***29 | Circuit Breaker As; (3200-Ampere) | 1 |
7c-0527 Starting Motor Gp-Electric -Dual
| 25***58 | Bus Bar As | 2 |
| 27***60 | Circuit Breaker As; (2500-Ampere) | 1 |
| 7C***27 | Starting Motor Group-Electric; -Dual | 1 |
207-1562 Starting Motor Gp-Electric
| 10***43 | Box Group-Terminal | 1 |
| 15***86 | Insert-Nut | 6 |
| 15***91 | Channel; (426-cm) | 0 |
157-2792 Strip As-Terminal
| 10***43 | Box Group-Terminal | 1 |
| 15***86 | Insert-Nut | 6 |
| 15***92 | Strip As-Terminal | 1 |
246-2377 Strip Gp-Terminal
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
| 24***77 | Strip Group-Terminal | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
246-2376 Strip Gp-Terminal -Dc
| 24***76 | Strip Group-Terminal; -Dc | 1 |
| 24***90 | Strip Group-Terminal; -Discrete Input/Output | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 2 |
258-8713 Strip Gp-Terminal
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
| 25***13 | Strip Group-Terminal | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
170-5396 Strip Gp-Terminal -Rtd
| 15***55 | Fuse; (10-Ampere) | 2 |
| 15***78 | Holder-Fuse | 2 |
| 17***96 | Strip Group-Terminal; -Rtd | 1 |
170-5397 Strip Gp-Terminal -Ac
| 17***97 | Strip Group-Terminal; -Ac | 1 |
| 24***75 | Strip Group-Terminal; -Ac | 1 |
| 24***76 | Strip Group-Terminal; -Dc | 1 |
246-2375 Strip Gp-Terminal -Ac
| 24***75 | Strip Group-Terminal; -Ac | 1 |
| 24***77 | Strip Group-Terminal | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 2 |
170-5394 Strip Gp-Terminal -Eui
| 16***12 | Wire As-Ground | 1 |
| 17***94 | Strip Group-Terminal; -Eui | 2 |
| 17***97 | Strip Group-Terminal; -Ac | 1 |
170-5400 Strip Gp-Terminal -Main
| 17***00 | Strip Group-Terminal; -Main | 1 |
| 24***90 | Strip Group-Terminal; -Discrete Input/Output | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 2 |
170-5399 Strip Gp-Terminal -Dc
| 17***99 | Strip Group-Terminal; -Dc | 1 |
| 24***75 | Strip Group-Terminal; -Ac | 1 |
| 24***76 | Strip Group-Terminal; -Dc | 1 |
246-8090 Strip Gp-Terminal -Discrete Input/Output
| 24***90 | Strip Group-Terminal; -Discrete Input/Output | 1 |
| 24***74 | Control Group-Engine Monitoring; -Input/Output | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
176-1057 Support Gp-Battery
| 17***57 | Support Group-Battery | 1 |
| 24***74 | Control Group-Engine Monitoring; -Input/Output | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
7n-0718 Switch Gp-Disconnect -Battery
| 3L***36 | Spacer-Bracket To Diesel Water Passage Cover | 1 |
| 3L***04 | Shield-Terminal | 1 |
| 3L***34 | Terminal-Ring; (0000-Ga, 1/2-In Screw) | 1 |
108-5555 Switch Gp-Disconnect -Battery
| 10***55 | Switch Group-Disconnect; -Battery | 1 |
| 23***26 | Control Group-Engine Monitoring; -Thermocouple | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
169-5384 Switch Gp-Remote -Starting
| 16***84 | Switch Group-Remote; -Starting | 1 |
| 23***26 | Control Group-Engine Monitoring; -Thermocouple | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
117-9721 Transformer As-Current
| 11***21 | Transformer As-Current | 1 |
| 22***52 | Relay Group; -Space Heater | 1 |
| 23***24 | Contactor | 1 |
117-9723 Transformer As-Current
| 11***23 | Transformer As-Current | 1 |
| 12***56 | Connection Group-Electrical | 1 |
122-6587 Transformer As-Current
| 12***87 | Transformer As-Current | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 24 |
| 3E***67 | Ring-Retaining | 1 |
122-6590 Transformer As-Current
| 11***49 | Bracket-Module | 1 |
| 11***87 | Elbow | 2 |
| 12***90 | Transformer As-Current; (3000:5 Ratio)(3000:5) | 1 |
122-6585 Transformer As-Current
| 12***85 | Transformer As-Current | 1 |
| 23***24 | Contactor | 1 |
| 25***13 | Strip Group-Terminal | 1 |
128-0115 Transformer As-Current
| 12***15 | Transformer As-Current | 1 |
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 4 |
122-6586 Transformer As-Current
| 12***86 | Transformer As-Current | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 16 |
| 3E***67 | Ring-Retaining | 1 |
117-9722 Transformer As-Current
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 11***22 | Transformer As-Current | 1 |
| 16***89 | Bracket-End | 2 |
117-9724 Transformer As-Current
| 11***24 | Transformer As-Current | 1 |
| 12***40 | Connection Group-Electrical; -Rtd | 1 |
119-0977 Transformer As-Current
| 11***77 | Transformer As-Current | 1 |
| 24***18 | Connection Group-Electrical; -Terminal Block, Switchgear | 1 |
119-0976 Transformer As-Current
| 11***76 | Transformer As-Current | 1 |
| 24***49 | Connector As; -Resistive Temperature Device | 1 |
122-6589 Transformer As-Current
| 12***89 | Transformer As-Current | 1 |
| 23***24 | Contactor | 1 |
122-6591 Transformer As-Current
| 11***49 | Bracket-Module | 1 |
| 12***91 | Transformer As-Current | 1 |
| 15***76 | Mount-Isolation | 8 |
122-6588 Transformer As-Current
| 12***88 | Transformer As-Current | 1 |
| 23***71 | Contactor Group-Generator; -Jacket Water Heater | 1 |
128-0116 Transformer As-Current
| 12***16 | Transformer As-Current | 1 |
| 17***03 | Control Group-Engine Electronic; -Rear Ecm-Front Ecm | 1 |
128-0795 Transformer As-Current
| 10***87 | Bolt; (M5x0.8x12-mm) | 4 |
| 11***11 | Cover | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
247-8095 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 5 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 3 |
| 13***74 | Terminal As | 17 |
144-9059 Transformer Gp-Current
| 14***59 | Transformer Group-Current | 1 |
| 20***10 | Control Group-Engine Electronic; -Primary | 1 |
247-8091 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 5 |
| 11***14 | End-Wire; (18-Ga) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
264-1067 Transformer Gp-Current
| 18***51 | Harness As-Sensor; -Engine | 1 |
| 26***67 | Transformer Group-Current | 1 |
206-0245 Transformer Gp-Current
| 20***45 | Transformer Group-Current | 1 |
| 5N***03 | Varistor As | 1 |
| 5N***05 | Plate-Switch | 1 |
247-8093 Transformer Gp-Current
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***38 | End-Wire; (16-Ga) | 58 |
247-8094 Transformer Gp-Current
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 21 |
| 12***10 | End-Wire; (14-Ga) | 3 |
229-5837 Transformer Gp-Current
| 22***37 | Transformer Group-Current | 1 |
| 3K***06 | Screw-Machine-Relay To Bracket | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
144-9056 Transformer Gp-Current
| 14***56 | Transformer Group-Current | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
144-9061 Transformer Gp-Current
| 14***61 | Transformer Group-Current | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 32***12 | Control Group-Engine Electronic | 1 |
247-8098 Transformer Gp-Current
| 24***98 | Transformer Group-Current | 1 |
| 25***38 | Harness As-Panel; -Engine Sensors | 1 |
247-8088 Transformer Gp-Current
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 12***87 | Mount-Flexible | 1 |
| 12***88 | Bracket | 1 |
247-8096 Transformer Gp-Current
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 25 |
| 11***97 | End-Wire; (14-Ga) | 6 |
247-8097 Transformer Gp-Current
| 24***97 | Transformer Group-Current | 1 |
| 28***33 | Mounting Group-Wiring | 1 |
247-8087 Transformer Gp-Current
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 4 |
| 24***87 | Transformer Group-Current | 1 |
| 4B***62 | Machine Screw--Relay Mounting | 4 |
247-8086 Transformer Gp-Current
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 4 |
| 24***86 | Transformer Group-Current | 1 |
| 4B***62 | Machine Screw--Relay Mounting | 4 |
229-5838 Transformer Gp-Current
| 22***38 | Transformer Group-Current | 1 |
| 23***71 | Connector As; (Bottom) | 1 |
| 23***72 | Connector As; (Top) | 1 |
247-8089 Transformer Gp-Current
| 09***15 | Terminal-Ring; (18-Ga To 22-Ga, 1/4-In Screw) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
247-8090 Transformer Gp-Current
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 20 |
| 11***97 | End-Wire; (14-Ga) | 2 |
247-8092 Transformer Gp-Current
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***38 | End-Wire; (16-Ga) | 58 |
278-9526 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 3 |
| 27***26 | Transformer Group-Current | 1 |
| 5P***75 | Terminal-Fork; (14-Ga To 16-Ga, No. 8 Screw)(14-16 Gauge, No.10 Screw) | 3 |
247-8099 Transformer Gp-Current
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Terminal As-Ring | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
247-8100 Transformer Gp-Current
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 34 |
| 11***97 | End-Wire; (14-Ga) | 6 |
247-8085 Transformer Gp-Current
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 1 |
| 16***10 | Harness As-Power; (Power Distribution Box) | 1 |
| 16***94 | Bracket As | 1 |
144-9062 Transformer Gp-Current -Droop
| 11***14 | End-Wire; (18-Ga) | 2 |
| 14***62 | Transformer Group-Current; -Droop | 1 |
| 24***62 | Harness As-Starting Aid | 1 |
264-1455 Transformer Gp-Potential
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 10 |
| 26***55 | Transformer Group-Potential | 1 |
154-3477 Transformer Gp-Potential
| 10***71 | Marker-Wire | 1 |
| 10***38 | End-Wire; (16-Ga) | 2 |
| 15***77 | Transformer Group-Potential | 1 |
154-3478 Transformer Gp-Potential
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 6 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
119-0978 Transformer-Current
| 10***38 | End-Wire; (16-Ga) | 24 |
| 11***78 | Transformer-Current; (Ratio 800:5) | 1 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
235-8824 Valve Gp-Ether Starting
| 10***38 | End-Wire; (16-Ga) | 22 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
242-7068 Wiring Gp-Electric Starting -Dual Starting Motor
| 24***33 | Harness As-Wiring; -Ignition, Lh | 1 |
| 24***68 | Wiring Group-Electric Starting; -Dual Starting Motor | 1 |
241-0235 Wiring Gp-Electric Starting
| 23***56 | Plug-Connector; (6-Pin) | 1 |
| 23***57 | Plug-Connector; (9-Pin) | 1 |
| 23***58 | Plug-Connector; (12-Pin) | 1 |
145-5138 Wiring Gp-Electronic Control
| 14***38 | Wiring Group-Electronic Control | 1 |
| 14***47 | Enclosure Group-Wiring; -Power Distribution | 1 |
| 14***60 | Harness As-Motor; (Starting) | 1 |
261-3161 Wiring Gp-Engine
| 16***25 | Pad-Heater | 1 |
| 16***26 | Pad-Heater | 1 |
| 16***27 | Cable-Heater; (6-Foot) | 1 |
264-1461 Wiring Gp-Generator
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 25***21 | Support | 2 |
| 25***22 | Panel | 1 |
249-7553 Wiring Gp-Generator -Thermocouple
| 24***53 | Wiring Group-Generator; -Thermocouple | 1 |
| 6V***75 | Track-Relay; (34-cm) | 0 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 2 |
261-7168 Wiring Gp-Generator
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 12***29 | Bracket | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 10 |
243-4269 Wiring Gp-Generator
| 10***32 | Thermostat; (60 Deg F To 160 Deg F)(Jacket Water Heater) | 1 |
| 24***69 | Wiring Group-Generator | 1 |
241-3379 Wiring Gp-Generator
| 12***60 | Thermostat As; (20-Deg C To 80-Deg C)(Jacket Water Heater) | 1 |
| 24***79 | Wiring Group-Generator | 1 |
243-4285 Wiring Gp-Generator
| 12***60 | Thermostat As; (20-Deg C To 80-Deg C)(Jacket Water Heater) | 1 |
| 24***85 | Wiring Group-Generator | 1 |
242-7960 Wiring Gp-Generator
| 10***32 | Thermostat; (60 Deg F To 160 Deg F)(Jacket Water Heater) | 1 |
| 24***60 | Wiring Group-Generator | 1 |
259-6072 Wiring Gp-Generator -Load Share Module
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 12***93 | Bracket As-Circuit Breaker; -Circuit Breaker | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 10 |
241-3378 Wiring Gp-Generator
| 16***09 | Cable-Heater; (6-Foot) | 1 |
| 16***10 | Pad-Heater | 1 |
| 16***11 | Pad-Heater | 3 |
249-1173 Wiring Gp-Generator
| 17***02 | Box-Switch | 3 |
| 17***25 | Lamp; (130-Volt, 100-Watt) | 8 |
| 17***30 | Light; (Fixture)(Vaportight) | 8 |
278-7706 Wiring Gp-Generator
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 03***07 | Connector; (Flared) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
122-0320 Wiring Gp-Generator -Shunt Trip
| 12***20 | Wiring Group-Generator; -Shunt Trip | 1 |
| 16***09 | Cable-Heater; (6-Foot) | 1 |
| 16***10 | Pad-Heater | 1 |
166-8368 Wiring Gp-Generator
| 16***25 | Pad-Heater | 1 |
| 16***26 | Pad-Heater | 3 |
| 16***27 | Cable-Heater; (6-Foot) | 1 |
276-4843 Wiring Gp-Generator
| 00***70 | Nipple-Strainer To Flange | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
276-4842 Wiring Gp-Generator
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 10 |
| 27***48 | Bracket | 1 |
247-9878 Wiring Gp-Generator
| 14***85 | Pump; (Circulation) | 1 |
| 19***79 | Seal | 2 |
| 23***28 | Element-Heating; (240-Volt, 9000-Watt) | 1 |
264-1460 Wiring Gp-Generator
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 4 |
| 26***60 | Wiring Group-Generator | 1 |
| 5S***03 | Nut-Full; (5/16 X 18 Thd) | 4 |
242-7961 Wiring Gp-Generator
| 12***60 | Thermostat As; (20-Deg C To 80-Deg C)(Jacket Water Heater) | 1 |
| 24***61 | Wiring Group-Generator | 1 |
249-1170 Wiring Gp-Generator
| 23***24 | Heater Group-Jacket Water | 1 |
| 24***70 | Wiring Group-Generator | 1 |
246-2380 Wiring Gp-Generator -Low Voltage
| 10***32 | Thermostat; (60 Deg F To 160 Deg F)(Jacket Water Heater) | 1 |
| 24***80 | Wiring Group-Generator; -Low Voltage | 1 |
198-5460 Wiring Gp-Panel -Low Voltage
| 19***60 | Wiring Group-Panel; -Low Voltage | 1 |
| 23***25 | Bracket | 1 |
| 23***27 | Hose As | 1 |
134-6323 Wiring Gp-Panel -Speed Control
| 13***23 | Wiring Group-Panel; -Speed Control | 1 |
| 23***25 | Bracket | 1 |
| 23***27 | Hose As | 1 |
241-0233 Wiring Gp-Panel -Air Shutoff
| 24***33 | Wiring Group-Panel; -Air Shutoff | 1 |
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 2 |
| 5P***15 | Washer-Mount 9w***75 Fuel Level Sensor | 4 |
241-0231 Wiring Gp-Panel -Prelubrication
| 23***21 | Mounting Group-Jacket Wtr Heater; -Lh | 1 |
| 24***31 | Wiring Group-Panel; -Prelubrication | 1 |
246-9376 Wiring Gp-Sensor -Coolant Level, Oil Temperature
| 12***40 | Panel-Circuit Breaker | 1 |
| 24***76 | Wiring Group-Sensor; -Coolant Level, Oil Temperature | 1 |
| 7W***91 | Seal (104 cm) | 0 |
246-9375 Wiring Gp-Sensor -Coolant Level, Oil Temperature
| 15***75 | Ladder Clip | 3 |
| 24***75 | Wiring Group-Sensor; -Coolant Level, Oil Temperature | 1 |
| 25***38 | Harness As-Panel; -Engine Sensors | 1 |
248-2596 Wiring Gp-Shutoff -Emergency Stop
| 06***88 | Locknut; (1-11-1/2-Thd) | 2 |
| 11***70 | Bushing; (Capped) | 2 |
| 1F***22 | Washer; (0.156x0.97x0.049-In Thk) | 4 |
Enclosures, Guards And Bases
210-3304 Baffle Gp-Air Flow
| 10***45 | Bolt-Flange Head; (5/16-18x0.625-In) | 12 |
| 21***04 | Baffle Group-Air Flow | 1 |
| 25***23 | Panel | 1 |
210-3307 Baffle Gp-Air Flow
| 11***47 | Relay; (2-Pole) | 1 |
| 12***92 | Base-Relay | 1 |
| 12***99 | Harness As-Wiring; (Main Terminal Strip) | 1 |
218-8528 Base Gp-Engine & Generator
| 21***40 | Spring; (Relay)(Us Sourced) | 1 |
| 21***28 | Base Group-Engine & Generator | 1 |
| 22***70 | Relay; (10-Ampere, 24-Volt)(Us Sourced) | 1 |
221-5234 Base Gp-Engine & Generator
| 10***38 | End-Wire; (16-Ga) | 4 |
| 12***99 | Harness As-Wiring; (Main Terminal Strip) | 1 |
| 12***97 | Harness As-Wiring; (Dc Terminal Strip) | 1 |
218-7067 Base Gp-Engine & Generator
| 15***81 | Relay Group; -Engine Failure | 1 |
| 21***67 | Base Group-Engine & Generator | 1 |
324-4576 Bracket Gp-Support
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***61 | Harness As-Sensor; (Coolant Level)(Coolant Sensor) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
141-4987 Cover Gp-Generator -Coupling
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
192-0059 Door Gp-Access
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***59 | Door Group-Access | 1 |
200-6477 Duct Gp-Cable
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 20***77 | Duct Group-Cable | 1 |
209-5655 Duct Gp-Enclosure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 20***55 | Duct Group-Enclosure | 1 |
220-9916 Enclosure Gp
| 11***99 | Strip-Terminal | 1 |
| 11***46 | Strip-Terminal | 1 |
| 11***47 | Cover | 1 |
220-9913 Enclosure Gp
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
208-6766 Enclosure Gp
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
220-9915 Enclosure Gp
| 11***22 | Sender As-Temperature; (100-Ohm)(Generator Bearing) | 1 |
| 11***99 | Strip-Terminal | 1 |
| 11***46 | Strip-Terminal | 1 |
211-3781 Enclosure Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
220-9914 Enclosure Gp
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
208-6759 Louver Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 20***59 | Louver Group | 1 |
216-0585 Mounting Gp-Vibration Isolator
| 21***85 | Mounting Group-Vibration Isolator | 1 |
207-9541 Panel As-Enclosure
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 20***41 | Panel As-Enclosure | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
207-9533 Panel As-Enclosure
| 20***33 | Panel As-Enclosure | 1 |
208-6753 Panel As-Enclosure
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 20***53 | Panel As-Enclosure | 1 |
| 31***98 | Block-Terminal; (600-Volt, 25-Ampere) | 34 |
207-9548 Panel As-Enclosure
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 4 |
207-9534 Panel As-Enclosure
| 20***34 | Panel As-Enclosure | 1 |
| 9D***21 | Switch-Toggle; (Monitoring System Service) | 1 |
207-9536 Panel As-Enclosure
| 12***18 | Starting Aid Group; -Relay, Switch | 1 |
| 20***36 | Panel As-Enclosure | 1 |
207-9535 Panel As-Enclosure
| 20***35 | Panel As-Enclosure | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
207-9537 Panel As-Enclosure
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
207-9542 Panel As-Enclosure
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 2 |
207-9538 Panel As-Enclosure
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
207-9539 Panel As-Enclosure
| 20***62 | Starting Motor Group-Electric | 2 |
| 20***39 | Panel As-Enclosure | 1 |
| 3L***04 | Shield-Terminal | 4 |
207-9544 Panel As-Enclosure
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 7 |
211-8941 Panel As-Enclosure
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***06 | Bar | 1 |
208-6755 Panel As-Enclosure
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 5 |
122-4869 Panel As-Enclosure -Extension Box
| 12***69 | Panel As-Enclosure; -Extension Box | 1 |
207-9540 Panel As-Enclosure
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 20***40 | Panel As-Enclosure | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
213-8608 Panel Gp-Sound Suppression
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 15***55 | Fuse; (10-Ampere) | 2 |
| 21***08 | Panel Group-Sound Suppression | 1 |
207-9565 Panel Gp-Sound Suppression
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***06 | Bar | 1 |
| 20***65 | Panel Group-Sound Suppression | 1 |
153-1031 Rail Gp-Engine & Gen Support
| 14***60 | Rail; (200-cm) | 0 |
| 15***31 | Rail Group-Engine & Gen Support | 1 |
| 16***89 | Bracket-End | 2 |
153-1030 Rail Gp-Engine & Gen Support
| 14***60 | Rail; (200-cm) | 0 |
| 15***30 | Rail Group-Engine & Gen Support | 1 |
| 15***55 | Fuse; (10-Ampere) | 3 |
151-5625 Rod Gp-Access Door
| 14***60 | Rail; (200-cm) | 0 |
| 15***25 | Rod Group-Access Door | 1 |
| 16***89 | Bracket-End | 2 |
211-0312 Roof Gp-Enclosure
| 14***60 | Rail; (200-cm) | 0 |
| 16***89 | Bracket-End | 2 |
| 16***17 | Cover-Terminal | 1 |
Engine Arrangement
214-5146 General Ar
| 10***05 | Valve Mechanism Group | 16 |
| 10***74 | Pump Group-Fuel Injection | 16 |
| 10***28 | Cylinder Block Group | 1 |
220-8684 Step Gp
| 21***30 | Engine Ar | 1 |
| 22***84 | Step Group | 1 |
Fuel System
161-0797 Control As-Governor -Load Share
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***42 | Gear-Camshaft Drive; (70-Teeth), . Cover (L) | 1 |
| 10***64 | Gear As-Idler; (69-Teeth)(Camshaft) | 2 |
149-6326 Governor Gp-Electronic
| 14***26 | Governor Group-Electronic | 1 |
| 27***35 | Spacer; (13.87x21.34x11-mm Thk) | 2 |
| 28***74 | Guard As-Alternator | 1 |
264-1071 Governor Gp-Electronic
| 17***59 | Guard As-Belt; (Alternator) | 1 |
| 26***71 | Governor Group-Electronic | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 1 |
213-8607 Lines Gp-Fuel
| 21***41 | Spacer; (13.9x21.3x8-mm Thk) | 2 |
| 21***07 | Lines Group-Fuel | 1 |
| 26***27 | Plate As | 1 |
223-4871 Lines Gp-Fuel
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 8 |
223-4872 Lines Gp-Fuel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 10***67 | Housing-Flywheel | 1 |
| 1D***90 | Bolt 4.75 In.(120.65 mm) Long | 16 |
226-1110 Mounting Gp-Water Separator
| 1D***90 | Bolt 4.75 In.(120.65 mm) Long | 16 |
| 22***20 | Housing-Flywheel | 1 |
| 22***10 | Mounting Group-Water Separator | 1 |
7n-8599 Pump Gp-Fuel Priming
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
115-1063 Pump Gp-Fuel Priming -Rh
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 11***63 | Pump Group-Fuel Priming; -Rh | 1 |
| 15***26 | Bracket As | 2 |
233-7973 Separator Gp-Water -Primary Fuel Filter
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 18 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 50 |
226-1109 Separator Gp-Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
| 1A***68 | Bolt 7.50 In. (19.05 cm) Long | 1 |
4p-7380 Separator Gp-Water
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
223-4771 Tank Gp-Fuel
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
223-4770 Tank Gp-Fuel
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
213-8604 Vent Gp-Fuel Tank
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
Generators
235-2277 Adapter -Lower
| 22***24 | Support As | 1 |
| 22***25 | Plate-Tread | 1 |
| 23***77 | Adapter; -Lower | 1 |
235-2276 Adapter -Upper
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 16***89 | Bracket-End | 2 |
| 17***55 | Marker-Terminal | 1 |
361-4913 Air Filter Gp-Generator
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 10***62 | Bracket | 1 |
121-5423 Air Filter Gp-Generator
| 12***23 | Air Filter Group-Generator | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
152-5179 Bracket Gp-Mounting -Opposite Drive End
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
| 15***79 | Bracket Group-Mounting; -Opposite Drive End | 1 |
| 16***85 | Bracket-Switch | 1 |
276-4844 Connection Gp-Generator Leads
| 27***44 | Connection Group-Generator Leads | 1 |
121-9480 Connection Gp-Terminal Strip
| 12***80 | Connection Group-Terminal Strip | 1 |
115-3056 Connection Gp-Terminal Strip
| 11***56 | Connection Group-Terminal Strip | 1 |
154-1901 Connection Gp-Terminal Strip
| 15***01 | Connection Group-Terminal Strip | 1 |
122-0330 Connection Gp-Terminal Strip
| 12***30 | Connection Group-Terminal Strip | 1 |
118-9430 Connection Gp-Terminal Strip
| 11***30 | Connection Group-Terminal Strip | 1 |
122-0328 Connection Gp-Terminal Strip
| 12***28 | Connection Group-Terminal Strip | 1 |
122-3487 Conversion Gp-Generator
| 12***87 | Conversion Group-Generator | 1 |
361-2453 Conversion Gp-Generator -Extension Box
| 36***53 | Conversion Group-Generator; -Extension Box | 1 |
130-8306 Cover-Drip
| 13***06 | Cover-Drip | 1 |
128-0595 Cover-Drip
| 12***95 | Cover-Drip | 1 |
142-4457 Exciter Gp -Power
| 14***57 | Exciter Group; -Power | 1 |
142-4453 Exciter Gp -Permanent Magnet
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
215-2402 Exciter Gp -Power
| 21***02 | Exciter Group; -Power | 1 |
144-1952 Generator Ar
| 14***52 | Generator Ar | 1 |
264-5022 Generator Ar
| 20***50 | Transformer Group-Current | 1 |
| 26***22 | Generator Ar | 1 |
147-9498 Generator Ar
| 14***98 | Generator Ar | 1 |
| 17***93 | Transformer Group-Potential | 1 |
280-3848 Generator Ar
| 11***24 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 28***48 | Generator Ar | 1 |
144-1824 Generator Ar
| 14***24 | Generator Ar | 1 |
Generator Group
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 14***23 | Generator Group | 1 |
| 1W***48 | Plate-Serial Number On Upper R.H.Side Of | 1 |
144-1823 Generator Gp
| 12***89 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***23 | Generator Group | 1 |
147-9497 Generator Gp
| 10***38 | End-Wire; (16-Ga) | 6 |
| 12***85 | Transformer As-Current | 3 |
| 14***97 | Generator Group | 1 |
144-1951 Generator Gp
| 10***38 | End-Wire; (16-Ga) | 6 |
| 11***77 | Transformer As-Current | 3 |
| 14***51 | Generator Group | 1 |
279-6661 Generator Gp
| 11***77 | Transformer As-Current | 3 |
| 27***61 | Generator Group | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
276-4650 Generator Gp
| 11***23 | Transformer As-Current | 3 |
| 27***50 | Generator Group | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
125-2114 Heat Sink As
| 11***78 | Transformer-Current; (Ratio 800:5) | 3 |
| 12***14 | Heat Sink As | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
276-4839 Installation Ar-Generator
| 12***87 | Transformer As-Current | 3 |
| 27***39 | Installation Ar-Generator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
Installation Ar-Generator
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
| 16***27 | Coupling | 1 |
| 16***31 | Adapter | 1 |
166-7142 Installation Ar-Generator
| 12***85 | Transformer As-Current | 3 |
| 16***42 | Installation Ar-Generator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
153-0191 Installation Ar-Generator
| 13***59 | Transformer As-Current | 3 |
| 15***91 | Installation Ar-Generator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
264-1449 Installation Ar-Generator
| 12***86 | Transformer As-Current | 3 |
| 26***49 | Installation Ar-Generator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
243-4270 Mounting Gp-Voltage Regulator
| 12***15 | Transformer As-Current | 3 |
| 24***70 | Mounting Group-Voltage Regulator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
242-3487 Mounting Gp-Voltage Regulator
| 12***90 | Transformer As-Current; (3000:5 Ratio)(3000:5) | 3 |
| 24***87 | Mounting Group-Voltage Regulator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
124-1563 Mounting Gp-Voltage Regulator
| 12***89 | Transformer As-Current | 3 |
| 12***63 | Mounting Group-Voltage Regulator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
123-8591 Mounting Gp-Voltage Regulator
| 12***88 | Transformer As-Current | 3 |
| 12***91 | Mounting Group-Voltage Regulator | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
5n-0593 Plate Gp-Generator Coupling
| 12***91 | Transformer As-Current | 3 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 6 |
142-4452 Rectifier Gp-Revolving
| 11***24 | Transformer As-Current | 3 |
| 14***52 | Rectifier Group-Revolving | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
298-3817 Rectifier Gp-Revolving
| 14***62 | Transformer Group-Current; -Droop | 1 |
| 29***17 | Rectifier Group-Revolving | 1 |
155-3820 Regulator As-Voltage
| 15***20 | Regulator As-Voltage | 1 |
| 20***46 | Transformer Group-Current | 1 |
155-3835 Regulator As-Voltage -Digital
| 15***71 | Shelf; (Transformer) | 1 |
| 15***35 | Regulator As-Voltage; -Sensing, Digital | 1 |
| 20***18 | Transformer As; (Potential) | 2 |
309-1019 Regulator As-Voltage -Digital
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***27 | Orifice; -Ether Starting | 1 |
155-3832 Regulator As-Voltage -Digital
| 15***71 | Shelf; (Transformer) | 1 |
| 15***88 | Transformer As; (Low Voltage) | 2 |
| 15***32 | Regulator As-Voltage; -Digital | 1 |
235-5725 Regulator As-Voltage -Digital
| 15***77 | Transformer Group-Potential | 1 |
| 23***25 | Regulator As-Voltage; -Digital-Generator | 1 |
105-4401 Regulator As-Voltage
| 10***01 | Regulator As-Voltage | 1 |
| 20***45 | Transformer Group-Current | 1 |
202-8634 Regulator As-Voltage -Digital
| 15***71 | Shelf; (Transformer) | 1 |
| 20***34 | Regulator As-Voltage; -Sensing | 1 |
| 20***18 | Transformer As; (Potential) | 3 |
259-4020 Regulator As-Voltage
| 25***20 | Regulator As-Voltage | 1 |
314-7755 Regulator As-Voltage -Digital
| 20***86 | Circuit Breaker As; (70-Ampere)(Alternator) | 1 |
| 24***44 | Wire As | 1 |
| 24***98 | Harness As-Power; (Alternator) | 1 |
Regulator Group-Voltage
| 03***75 | Washer; (0.266x1.25x0.06-In Thk) | 6 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 1 |
| 4B***74 | Washer; (6.4x14.5x1.6-mm Thk) | 1 |
276-4846 Regulator Gp-Voltage
| 23***70 | Cover Group-Module Connector | 2 |
| 23***57 | Adapter | 2 |
| 23***99 | Panel Group-Circuit Breaker; -Power Distribution | 1 |
121-6201 Regulator Gp-Voltage
| 12***01 | Regulator Group-Voltage | 1 |
| 24***62 | Wire As | 1 |
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 2 |
121-6203 Regulator Gp-Voltage -Digital
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 21 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
263-8921 Regulator Gp-Voltage
| 00***40 | Connector; (Flared) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 17 |
121-6200 Regulator Gp-Voltage
| 12***00 | Regulator Group-Voltage | 1 |
| 20***87 | Circuit Breaker As; (40-Ampere)(Starting Motor) | 1 |
| 24***36 | Wire As | 1 |
260-9298 Regulator Gp-Voltage
| 00***40 | Connector; (Flared) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 17 |
121-6202 Regulator Gp-Voltage -Digital
| 12***02 | Regulator Group-Voltage; -Digital | 1 |
| 12***30 | Harness As-Power; -Digital Voltage Regulator | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 5 |
208-0391 Rotor Gp-Generator
| 20***91 | Rotor Group-Generator | 1 |
| 20***51 | Harness As-Wiring; -Shunt Trip | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 10 |
208-0392 Rotor Gp-Generator
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 32 |
| 10***39 | End-Wire; (12-Ga) | 8 |
145-7466 Rotor Gp-Generator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***38 | End-Wire; (16-Ga) | 6 |
| 11***14 | End-Wire; (18-Ga) | 15 |
145-6001 Screen Gp-Air
| 10***38 | End-Wire; (16-Ga) | 3 |
| 11***84 | Switch As-Toggle; (Momentary)(Manual Engine Speed Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
145-7655 Stator Gp-Main
| 14***55 | Stator Group-Main | 1 |
| 24***04 | Harness As-Wiring; -Generator Terminal Strip | 1 |
| 24***52 | Harness As-Power; -Digital Voltage Regulator | 1 |
148-2670 Stator Gp-Main
| 10***38 | End-Wire; (16-Ga) | 9 |
| 14***70 | Stator Group-Main | 1 |
| 24***01 | Harness As-Wiring; (Vr6 Voltage Regulator) | 1 |
145-7638 Stator Gp-Main
| 10***38 | End-Wire; (16-Ga) | 10 |
| 12***70 | Potentiometer; (10,000-Ohm)(Voltage Adjustment) | 1 |
| 14***38 | Stator Group-Main | 1 |
145-7645 Stator Gp-Main
| 14***45 | Stator Group-Main | 1 |
| 24***00 | Harness As-Wiring; -Generator Terminal Strip | 1 |
Lubrication System
213-8605 Drain Gp-Oil
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 22 |
215-9450 Fumes Disposal Gp
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 21***50 | Fumes Disposal Group | 1 |
215-9439 Fumes Disposal Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 17 |
| 21***39 | Fumes Disposal Group | 1 |
| 23***46 | Seal-O-Ring | 1 |
216-3940 Fumes Disposal Gp
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 48 |
| 12***88 | Crankshaft As | 1 |
| 14***31 | Bearing As-Main; (Standard) | 9 |
195-0958 Mounting Gp-Engine Oil Filter
| 19***58 | Mounting Group-Engine Oil Filter | 1 |
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
249-5262 Pump & Lines Gp-Prelubrication -Deep Pan
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 10***73 | Cylinder Block As | 1 |
| 10***98 | Bearing-Camshaft | 18 |
244-1535 Pump & Lines Gp-Prelubrication
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
| 10***73 | Cylinder Block As | 1 |
3t-3735 Pump Gp-Prelubrication
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
302-8729 Pump Gp-Prelubrication
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
5n-4659 Regulator Gp-Oil Level
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
208-4862 Separator Gp-Oil
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
209-6731 Tank Gp-Engine Oil
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
147-3738 Valve Gp-Fluid Sampling -Oil
| 10***77 | Spring-Valve; (Inner) | 4 |
| 10***80 | Spring-Valve; (Outer) | 4 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
Operator Station
Alarm Group
| 17***90 | Wire; (18-Ga, White)(42.5-cm Ea) | 0 |
| 2W***80 | Boot-Switch | 2 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
178-9030 Box As-Storage
| 11***14 | End-Wire; (18-Ga) | 40 |
| 17***30 | Box As-Storage | 1 |
| 24***83 | Harness As-Wiring; (Input/Output) | 1 |
Box Group-Storage
| 11***89 | Spacer; (15.9x50.8x6.3-mm Thk) | 4 |
| 17***30 | Box As-Storage | 1 |
| 20***60 | Nut As-Spring; (1/4-20-Thd) | 4 |
9w-3577 Module Gp-Alarm
| 21***02 | Plate | 2 |
| 21***03 | Plate | 2 |
| 21***04 | Baffle Group-Air Flow | 1 |
9y-2907 Control Gp-Alarm Module
| 1L***02 | Connector | 1 |
| 21***96 | Tank & Base Group-Fuel | 1 |
| 21***12 | Lift As | 4 |
130-3332 Control Gp-Alarm Module
| 13***32 | Control Group-Alarm Module | 1 |
| 18***12 | Brace-Engine Support | 2 |
| 18***13 | Plate | 1 |
130-3333 Module Gp-Alarm
| 12***94 | Cover-Drip | 1 |
| 13***33 | Control Group-Alarm Module; (Custom) | 1 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 6 |
130-3349 Control Gp-Alarm Module
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 15 |
| 13***49 | Control Group-Alarm Module | 1 |
| 15***25 | Rod Group-Access Door | 1 |
9y-2906 Control Gp-Alarm Module
| 21***00 | Base As | 1 |
| 21***12 | Lift As | 4 |
| 22***05 | Step As | 3 |
Control Group-Emcp Electronic
| 10***27 | Screw-Pan Head; (10-24x0.25-In) | 8 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 8 |
222-6916 Control Gp-Emcp Electronic
| 10***38 | End-Wire; (16-Ga) | 16 |
| 11***14 | End-Wire; (18-Ga) | 21 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
159-3601 Control Gp-Emcp Electronic
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 15***07 | Cable-Electrical; (2-Conductor, 18-Ga)(2439-cm) | 0 |
118-2070 Control Gp-Emcp Electronic
| 10***38 | End-Wire; (16-Ga) | 27 |
| 11***14 | End-Wire; (18-Ga) | 44 |
| 11***70 | Control Group-Emcp Electronic; -Generator Set Control + | 1 |
118-0175 Control Gp-Emcp Electronic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***38 | End-Wire; (16-Ga) | 6 |
| 11***14 | End-Wire; (18-Ga) | 15 |
234-1644 Control Gp-Engine Monitoring -Thermocouple
| 10***38 | End-Wire; (16-Ga) | 6 |
| 23***44 | Control Group-Engine Monitoring; -Thermocouple | 1 |
| 25***71 | Harness As-Wiring; (Load Share Module) | 1 |
249-1174 Control Gp-Engine Monitoring -Input/Output
| 24***60 | Wiring Group-Generator | 1 |
| 24***74 | Control Group-Engine Monitoring; -Input/Output | 1 |
237-0126 Control Gp-Engine Monitoring -Thermocouple
| 23***26 | Control Group-Engine Monitoring; -Thermocouple | 1 |
| 24***78 | Wiring Group-Generator | 1 |
237-0125 Control Gp-Engine Monitoring -Resistive Temperature Device
| 10***71 | Marker-Wire | 1 |
| 10***38 | End-Wire; (16-Ga) | 4 |
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
300-7647 Control Gp-Generator Set -Emcp 3.3
| 13***24 | Harness As-Wiring; (Speed Control) | 1 |
| 30***47 | Control Group-Generator Set; -Emcp 3.3 | 1 |
| 4D***36 | Switch As-Toggle; (Engine Protection Override) | 1 |
274-8518 Control Gp-Generator Set -Emcp 3.3
| 24***70 | Wiring Group-Generator | 1 |
| 27***18 | Control Group-Generator Set; -Emcp 3.3 | 1 |
227-5802 Control Gp-Generator Set -Emcp 3.3
| 22***02 | Control Group-Generator Set; -Emcp 3.3 | 1 |
| 24***78 | Wiring Group-Generator | 1 |
247-8201 Control Gp-Load Share Module
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 10 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
Cover Group
276-4845 Cover Gp-Control Panel -Annunciator
| 20***87 | Circuit Breaker As; (40-Ampere)(Starting Motor) | 1 |
| 24***36 | Wire As | 1 |
| 24***65 | Wire As | 1 |
249-1169 Cover Gp-Control Panel -Annunciator
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 6 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
227-2483 Enclosure Gp-Literature
| 20***87 | Circuit Breaker As; (40-Ampere)(Starting Motor) | 1 |
| 22***83 | Enclosure Group-Literature | 1 |
| 23***94 | Timer | 1 |
121-5421 Filter As-Electronic -Radio Frequency Interference
| 12***21 | Filter As-Electronic; -Radio Frequency Interference | 1 |
| 19***74 | Wiring Group-Panel; -Medium Voltage | 1 |
Filter Group-Electronic
| 12***21 | Filter As-Electronic; -Radio Frequency Interference | 1 |
| 14***70 | Bar; (Grounding) | 2 |
145-7571 Filter Gp-Electronic -Radio Frequency Interference
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***71 | Filter Group-Electronic; -Radio Frequency Interference | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
Fire Extinguisher Group
| 15***78 | Bracket As | 2 |
| 20***60 | Nut As-Spring; (1/4-20-Thd) | 8 |
| 21***22 | Support As | 2 |
227-3711 Fire Extinguisher Gp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 22***11 | Fire Extinguisher Group | 1 |
234-1848 Gauge Gp-Fuel Level -Fuel
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***14 | End-Wire; (18-Ga) | 10 |
| 11***23 | Block-Contact; (1-Pole)(Normally Open) | 1 |
234-1850 Gauge Gp-Fuel Level -Fuel
| 21***15 | Plate | 2 |
| 21***16 | Plate | 2 |
| 23***50 | Gauge Group-Fuel Level; -Fuel | 1 |
236-1159 Module Gp-Alarm -Annunciator
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 18 |
| 15***82 | Striker | 6 |
| 19***59 | Door Group-Access | 3 |
263-8916 Module Gp-Alarm
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 18 |
| 15***82 | Striker | 6 |
| 19***59 | Door Group-Access | 3 |
187-9371 Module Gp-Alarm
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 18 |
| 15***82 | Striker | 6 |
| 18***71 | Module Group-Alarm | 1 |
187-9372 Module Gp-Alarm
| 18***72 | Module Group-Alarm | 1 |
| 21***81 | Sheet | 9 |
| 21***82 | Sheet | 1 |
263-8917 Module Gp-Alarm
| 20***60 | Louver As; (Exhaust) | 1 |
| 20***58 | Plate | 14 |
| 20***60 | Bearing | 72 |
263-8156 Module Gp-Alarm
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 18 |
| 15***82 | Striker | 6 |
| 19***59 | Door Group-Access | 3 |
130-3325 Module Gp-Alarm
| 13***25 | Module Group-Alarm; (Custom) | 1 |
| 14***68 | Pipe-Bulk; (520 cm) | 0 |
| 1L***02 | Connector | 1 |
130-3324 Module Gp-Alarm
| 13***24 | Module Group-Alarm | 1 |
| 1L***02 | Connector | 1 |
| 21***62 | Fitting | 1 |
130-3350 Module Gp-Alarm
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 11***69 | Nut-Spring | 4 |
| 13***50 | Module Group-Alarm | 1 |
187-9370 Module Gp-Alarm
| 16***96 | Nut; (1/4-20-Thd)(Self-Clinching) | 15 |
| 18***70 | Module Group-Alarm | 1 |
| 20***46 | Screen As | 1 |
9x-0203 Module Gp-Relay Driver
| 21***00 | Isolator | 10 |
| 6V***67 | Bolt; (5/8-11x5.25-In) | 1 |
| 7X***48 | Nut-Full (5/8 X 11 Thd) | 1 |
264-0588 Module Gp-Synchronizing Lights
| 16***97 | Stud; (1/4-20x0.75-In) | 4 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
| 19***14 | Plate As | 4 |
128-3623 Module Gp-Synchronizing Lights
| 12***23 | Module Group-Synchronizing Lights | 1 |
| 16***97 | Stud; (1/4-20x0.75-In) | 2 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
106-5171 Module Gp-Synchronizing Lights
| 10***71 | Module Group-Synchronizing Lights | 1 |
164-8940 Module Gp-System Communication
| 16***40 | Module Group-System Communication | 1 |
| 16***97 | Stud; (1/4-20x0.75-In) | 4 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
222-6909 Module Gp-System Communication
| 16***97 | Stud; (1/4-20x0.75-In) | 4 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
| 19***14 | Plate As | 4 |
263-8922 Mounting Gp-Control Panel
| 16***97 | Stud; (1/4-20x0.75-In) | 2 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
| 19***14 | Plate As | 2 |
104-4704 Mounting Gp-Control Panel -Emcp Ii
| 10***04 | Mounting Group-Control Panel; -Emcp Ii | 1 |
| 16***97 | Stud; (1/4-20x0.75-In) | 4 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
218-3152 Panel Ar-Control
| 16***97 | Stud; (1/4-20x0.75-In) | 2 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
| 19***14 | Plate As | 2 |
Panel Group
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***97 | Block-Terminal | 1 |
247-3343 Panel Gp-Control
| 16***97 | Stud; (1/4-20x0.75-In) | 4 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
| 19***14 | Plate As | 4 |
187-6307 Panel Gp-Control
| 16***97 | Stud; (1/4-20x0.75-In) | 2 |
| 18***07 | Panel Group-Control | 1 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
264-1458 Panel Gp-Electronic
| 16***97 | Stud; (1/4-20x0.75-In) | 2 |
| 19***26 | Nut; (1/4-20 Thd) | 18 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
276-4838 Panel Gp-Electronic
| 16***97 | Stud; (1/4-20x0.75-In) | 4 |
| 19***26 | Nut; (1/4-20 Thd) | 18 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
131-1961 Panel Gp-Instrument
| 13***61 | Panel Group-Instrument | 1 |
| 18***10 | Brace-Engine Support | 1 |
| 18***21 | Support As; (Lh) | 1 |
7e-8270 Panel Gp-Instrument
| 20***33 | Panel As-Enclosure | 21 |
| 20***34 | Panel As-Enclosure | 1 |
| 20***35 | Panel As-Enclosure | 1 |
131-1963 Panel Gp-Instrument
| 13***63 | Panel Group-Instrument | 1 |
| 18***10 | Brace-Engine Support | 1 |
| 18***23 | Support As; (Rh) | 1 |
131-1965 Panel Gp-Instrument -Emcp Ii
| 13***65 | Panel Group-Instrument; -Emcp Ii | 1 |
| 15***36 | Rod | 1 |
| 16***95 | Bracket | 1 |
222-6911 Panel Gp-Instrument
| 22***11 | Panel Group-Instrument | 1 |
222-6912 Panel Gp-Instrument
| 22***12 | Panel Group-Instrument | 1 |
222-6915 Panel Gp-Instrument
| 22***15 | Panel Group-Instrument | 1 |
| 24***62 | Connection Group-Electrical; -Terminal Block | 1 |
222-6914 Panel Gp-Instrument
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 12***74 | Seal | 1 |
| 13***54 | Bar-Support | 1 |
222-6913 Panel Gp-Instrument
| 12***10 | Frame As-Filter | 1 |
| 12***12 | Filter Element-Air; (Generator) | 1 |
| 12***14 | Shield As-Filter | 1 |
131-1960 Panel Gp-Instrument
| 13***60 | Panel Group-Instrument | 1 |
| 14***83 | Ring-Retaining | 5 |
| 21***20 | Panel | 132 |
7c-5296 Panel Gp-Instrument
| 16***97 | Stud; (1/4-20x0.75-In) | 2 |
| 19***29 | Nut; (3/8-16 Thd) | 1 |
| 19***14 | Plate As | 2 |
222-6910 Panel Gp-Instrument
| 21***54 | Panel; (Roof) | 5 |
| 21***56 | Panel; (Intake End) | 1 |
| 21***58 | Panel As; (Exhaust Stack) | 1 |
Prime Package
211-8942 Panel As
| 11***84 | Switch As-Toggle; (Momentary)(Manual Engine Speed Control) | 1 |
| 21***42 | Panel As | 1 |
| 24***71 | Harness As-Wiring; -Generator Terminal Strip | 1 |
Prime Package
| 11***97 | End-Wire; (14-Ga) | 41 |
| 11***61 | End-Wire; (10-Ga) | 16 |
| 12***68 | Circuit Breaker; (15 Amp, 1 Pole) | 2 |
Service Equipment And Supplies
6l-4502 Chart-Plate & Film
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 34 |
Charts & Films
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 14***42 | Film-Warning; (Hot Surface) | 4 |
205-7860 Film Gp -Product Identification
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 16 |
| 11***32 | Strip-Terminal | 3 |
220-9943 Film Gp
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 22***43 | Film Group | 1 |
227-0026 Film Gp
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 12***95 | Cable As-Extension | 9 |
| 22***26 | Film Group | 1 |
264-5354 Film Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 36 |
227-4077 Film Gp
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 12***95 | Cable As-Extension | 15 |
| 22***77 | Film Group | 1 |
121-9272 Kit-Marine Generator Parts
| 11***12 | Box Group-Extension Terminal; (Low Voltage) | 1 |
| 12***72 | Kit-Marine Generator Parts | 1 |
| 12***94 | Box & Mounting Group; -Cable Access | 1 |
171-6719 Kit-Parts -Generator
| 12***87 | Conversion Group-Generator | 1 |
| 17***19 | Kit-Parts; -Generator | 1 |
Parts Group-Miscellaneous
| 13***34 | Shim; (0.025-mm Thk) | 1 |
| 13***35 | Shim; (0.0508-mm Thk) | 1 |
| 13***36 | Shim; (0.076-mm Thk) | 1 |
137-8533 Shim Pack
| 13***33 | Shim Pack; (Includes 13-Shims) | 1 |
PP3516 serial number reference
The PIN/serial plate on a PP3516 power module is mounted on the module frame or generator end-frame near the control panel, with a duplicate often riveted to the engine block near the flywheel housing (standard Cat engine PIN location). Read the prefix as the first three characters before the numeric sequence (e.g. PPS00125). The prefix identifies the specific power-package build, not a generic 3516/3516B engine arrangement, so match it against the power module's own parts manual rather than a bare 3516-series engine lookup.
| Prefix | Identifies | Notes |
|---|---|---|
| PPS | PP3516 Power Package/Power Module, engine-generator set built around the 3516B TA V-16 engine | Serial range PPS00001-UP. Covers the power package electrical and starting system, control panel, and general engine-generator assembly. This is the only confirmed prefix for this model; verify the exact digit range with a Cat dealer for the specific unit. |
Frequently asked questions
What engine does the Caterpillar PP3516 use?
The PP3516 power package is built around Caterpillar's 3516/3516B V16 diesel, a 69 L turbocharged-aftercooled engine with a 170 mm x 190 mm bore and stroke. It pairs the engine with an EMCP 3.3 control group under the PPS serial-number prefix.
What is the operating weight of the Caterpillar PP3516?
Caterpillar has not published a standalone PP3516 weight figure. Comparable 3516B generator sets in the same power class run roughly 14,000-16,000 kg (31,000-35,000 lb) dry on an open skid; exact weight varies by rating, alternator, and enclosure, so confirm against the specific unit's dataplate.
What replaced the Caterpillar PP3516?
Caterpillar moved its portable and rental power packages to the XQ series, including a 3516B-based portable module, and later 3516C- and 3516E-based generator sets carry the engine platform forward with updated emissions and electronic controls. There is no single named direct successor; the replacement depends on the fleet and rating in question.
What PP3516 owners discuss
What engine sits under a PP3516 power package, and does it match the numbers quoted for newer 3516-series gensets?
The PP3516 is built around Cat's 3516 V16 diesel: 69 L displacement, 170 mm bore x 190 mm stroke, turbocharged-aftercooled, roughly 13.0:1 compression, mechanical unit injection paired with ADEM electronic governing on the earlier mechanical builds. Output on later 3516/3516B factory gensets runs about 1450-1750 ekW at 60 Hz or 1600-2000 kVA at 50 Hz, but that's for the current catalog packages, not a confirmed PP3516 nameplate rating. Treat any PP3516-specific kW figure as varying by build config and voltage option until you've read the actual dataplate - don't assume it matches a 3516B or 3516C brochure number.
What's the number-one gripe long-term operators have with this engine family?
Upper intake valve wear. Marine and industrial users running the 3516/3516B block describe recession serious enough that they end up adjusting valve lash close to every 1000 hours just to stay ahead of it, more often than they were used to on older mechanical Cat engines. A smaller number report full valve failures rather than gradual wear. Cat has told some owners the recession rate falls within tolerance, but the community view is that this engine needs closer valve-train monitoring than its predecessors. Given the risk of a dropped valve taking out a piston or liner, have your dealer verify valve lash and inspect the valve train at every scheduled interval.
Do turbo and exhaust manifold problems come up much on these units?
Yes. The complaint pattern is oil weeping from the manifold-to-turbine joint, sometimes traced to a cracked exhaust manifold flange or a worn turbo seal, showing up as smoke and oil residue around the turbo. Left alone it accelerates turbo bearing wear and can cook the seal completely. The usual fix is pulling the turbo, replacing gaskets and seals, checking the oil feed/return lines for restriction, and re-torquing the manifold to spec. Because a failed turbo or cracked manifold on a genset this size is a fire and overspeed risk, have your dealer verify the repair and pressure-check the joint before returning the set to service.
What electrical or sensor faults should I expect to chase on the control system?
The recurring one is a throttle position sensor fault that triggers an unexpected shutdown after the unit has been running for a while, usually traced back to corroded or damaged wiring at the sensor connector rather than the sensor itself. Owners also report generic communication/sensor fault codes on the EMCP panel that clear up once the harness and connectors are cleaned and reseated. Before swapping the sensor, check connector condition and verify the signal changes smoothly with throttle movement - a lot of "sensor failures" turn out to be a corroded pin.
What do owners say about starting and cold-start behavior on a V16 this size?
Cranking a 69 L V16 reliably needs a serious 24V start bank, so these units are commonly fitted with several heavy-duty batteries wired in parallel pairs feeding a single starter - a bank that size needs its own maintenance attention, not just the engine. On cold starts, owners note oil can take several minutes to fully work its way up to the rocker arms and valve train even with block and oil heaters fitted, so operators favor pre-lube and jacket-water heating on standby units that sit idle for long stretches rather than relying on a cold hard start.
What should I check before buying a used PP3516 package?
Compare hours against age and duty cycle - a low-hour unit with no service records is a worse bet than a higher-hour unit with full history. Ask for a load bank test report or a video of the unit running under load, plus oil analysis (SOS-type) history focused on the known wear items: valve lash intervals, turbo/manifold condition, and any prior sensor or shutdown fault history on the control panel log. Walk the enclosure and radiator/cooling package for corrosion, especially on units that lived outdoors or coastal, and check the battery bank's age and condition since replacing a full start bank on a set this size isn't cheap. Have your dealer do a pre-purchase inspection and pull the fault-code history before you commit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PP3516 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.