Caterpillarengine - generator setpower module
Caterpillar PM3516
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar PM3516 is a factory-packaged power module: a skid- or container-mounted diesel generator set built around Cat's 3516 diesel, a turbocharged 16-cylinder, 69-liter V-engine. Early production used mechanical unit injection; later builds moved to the electronically governed 3516B engine, identifiable by its own serial prefix range. Package weight and footprint are not published as one fixed figure, since the module is engineered to order and enclosure, radiator, generator-end frame, and fuel tank size all vary the total. Documented output for one 1994-built unit was 1825 kW at 480V, though kW, voltage, and frequency are configurable per order across a broad low-to-medium-voltage range. Cat sold the PM3516 alongside sibling power modules (PM3508, PM3512, and the gas-fueled PMG3516) for prime, standby, and rental power, with land-drilling rigs among its core applications.
What changed across the PM3516's production run is mainly the fuel system and controls. Mechanical unit injectors and analog governing on early units gave way to ADEM-electronic-governed 3516B engines with digital control panels, bringing tighter speed regulation and better diagnostics. Cat eventually folded rental-grade power modules on this engine family into its XQ product line, so the PM3516 name faded from new-unit lists even as the underlying 3516/3516B engine stayed in production under other packaging. In the used and parts market, PM3516 modules remain valued for the 3500 family's rebuildable mechanical simplicity, parts commonality with 3512B and 3516B power modules, and continued dealer support for an engine platform still sold today in other packages, making these units a common target for overhaul-and-resell rather than scrap.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar PM3516 specifications
Engine
| Engine family | Cat 3516-series V-16, 4-stroke-cycle diesel. Earlier production power modules used mechanical unit injection (3516 MUI); later production shifted to the HEUI-injected 3516B — shared piston part numbers link the PM3516 package to 3516B, 3512B, and XQ-2000 power modules in later builds. |
| Cylinders / configuration | 16 cylinders, V-16 arrangement, turbocharged. |
| Displacement / bore x stroke | Approximately 69 L (4211 cu in), bore 170 mm x stroke 190 mm. These figures come from the base 3516 engine family and are not republished separately for the PM3516 package — treat as representative, not confirmed nameplate data for every build. |
| Power output | Nameplate rating of 1825 kW at 480 V documented on a 1994-built unit. Power modules of this type are commonly engineered to order, so kW/voltage/frequency vary by unit and generation — this is an example, not a single fixed factory figure. |
| Emissions tier | Not documented for this model designation. The earliest known unit dates to 1994, predating modern emissions-tier certification, and no tier rating has surfaced for later production. |
Weights
| Operating / package weight | Not published for the assembled PM3516 power module (enclosure, radiator, skid, and generator end). Only the bare 3516-family engine weight (roughly 7484 kg / 16,500 lb) is documented, and that covers the engine alone, not the packaged unit. |
| Ground pressure | Not applicable. The PM3516 is a stationary/portable power module, not a tracked or wheeled machine. |
Dimensions
| Transport length / width / height | Not published specifically for the PM3516. Field photos confirm it is built onto a skid base and fits inside a standard shipping container for transport, but no dimensional figures are documented under this model designation. |
| Other dimensions | Not documented. Verify container/skid footprint with your dealer for the specific unit and enclosure configuration. |
Performance
| Travel speed | Not applicable — the PM3516 is a stationary/portable power module, not a self-propelled machine. |
| Gradeability | Not applicable for this equipment type. |
| Rated electrical output | 1825 kW at 480 V documented for at least one unit (1994 build, 3516 MUI engine). Voltage, frequency, and kW rating are configurable per order, consistent with Cat's power-module product line. |
Service capacities (summary)
| Fuel tank | 1250 US gal (4732 L) fuel tank documented for a PM3516 unit. |
| Engine oil | Not confirmed specifically for the PM3516 package. Capacity depends on which engine build (mechanical 3516 vs 3516B) is fitted — verify with your dealer for the exact unit. |
| Cooling system | Not confirmed specifically for the PM3516 package. Coolant capacity depends on radiator and engine configuration — verify with your dealer. |
| Hydraulic system | Not applicable — no hydraulic system on this generator power module. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PM3516 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (oil pan, with filter) | approx. 405 L (107 US gal) refill — varies with sump/pan configuration | Cat DEO or Cat DEO-ULS diesel engine oil. SAE 15W-40 for standard ambient range (roughly -9C to 40C / 15F to 104F); SAE 10W-30 for cold-weather starting below that range; full-synthetic cold-weather grade for arctic service. Follow the viscosity-by-ambient-temperature chart in the fluids recommendation manual for exact cutoffs. |
| Cooling system — engine (jacket water) only | approx. 233 L (61.5 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 concentration; Cat DEAC (Diesel Engine Antifreeze/Coolant) is the accepted alternate where ELC is unavailable. ELC supports extended drain intervals (multi-year/high-hour) versus conventional DEAC. |
| Cooling system — total with radiator | varies by configuration/series: approx. 330 L (87 US gal) on drilling-module packaging up to roughly 435-590 L (115-156 US gal) on larger radiator/generator-set packaging | Same as engine-only circuit: Cat ELC premixed 50/50, or Cat DEAC as the conventional alternate. |
| Fuel tank | varies widely by skid/package: base-mounted day tank around 990 L (261 US gal) on some configurations, up to roughly 4,700 L (1,250 US gal) on extended-run rental/drilling skids — confirm the actual tank fitted to the specific unit | Cat-specified diesel fuel, No. 2-D grade for normal service, No. 1-D grade for cold ambient conditions, per the diesel fuel specification in the engine's fluids manual. |
| Grease (external lube points, spec only) | not a bulk-fill system; applied at individual fittings per the lubrication chart | NLGI Grade 2 multipurpose grease (Cat-branded equivalent) for the limited external grease points on the engine-generator skid (linkages, fan/idler bearings where fitted). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar PM3516 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
| Every 9,000 h |
|
| Every 25,000 h |
|
Servicing the PM3516 beyond the schedule
Predictive maintenance & fluid analysis
Cat SOS oil sampling on the 3516 V-16 catches liner and bearing wear early, especially on rental and drilling-duty modules run near-continuous hours between services. Track coolant SCA or ELC concentration to catch cylinder liner cavitation before it perforates a liner under sustained load. Log control-panel event history and periodically megger the generator winding insulation, since modules left standing between rental jobs are prone to moisture ingress that shows up as falling insulation resistance before it causes a ground fault.
Corrective & common repairs
Common PM3516 repairs center on fuel-injection and control wiring: throttle position and speed/timing sensor faults, oil pressure and coolant temperature sensor circuit failures, and intermittent injector-harness opens on individual cylinders all surface on the control panel. Weak batteries and corroded ground straps trigger low-voltage alarms on units left idle between rental or drilling jobs. Turbocharger boost leaks and worn charge-air joints are frequent on skids run hard, and exhaust manifold or flex-joint cracking from thermal cycling is routine on continuously vented installations.
Overhaul & rebuild points
At top-end overhaul, expect cylinder liner, piston, and ring wear along with valve guide and seat recession typical of high-hour 3516 diesels; recondition heads and torque fasteners to spec rather than reuse them. Crankshaft vibration dampers on this V-16 bond-fail with age and need replacement once the bonding rubber cracks, not just inspection. Rebuilds commonly update fuel injectors and the turbocharger core; verify generator winding insulation and bearing condition before returning a rebuilt module to rental or standby service.
Seasonal & environment servicing
PM3516 skids built for oilfield and rental duty run outdoors, so jacket-water heaters and battery blankets matter in cold climates to keep the 3516 within cold-start limits. Check the radiator core and remote cooling package fins for dust and site debris that choke airflow on desert or lease-road locations. Weatherproof or sound-attenuated enclosures need louver, drain, and seal checks before wet-season deployment. Drain the fuel tank water trap often on humid or coastal sites, where condensation and biological growth foul the sub-base tank faster than in dry climates.
PM3516 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 5D-5957 | Seal-O-Ring | Fuel system service | Check fitment → |
| 5P-2645 | Elbow-Unfiltered Fuel From Adapter | Fuel system service | Check fitment → |
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0756 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 6V-3907 | Seal-O-Ring | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PM3516 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 91-08 (CID 0091 / FMI 08) | Throttle Position signal abnormal | Throttle position sensor output erratic or out of range, damaged wiring/connector at the sensor circuit | Inspect throttle position sensor wiring and connectors for corrosion or damage, verify sensor output sweeps smoothly with a multimeter, replace sensor if erratic; engine ECM defaults throttle to low idle and check-engine lamp lights while active |
| 336-02 (CID 0336 / FMI 02) | Engine Control Module start/run/stop input signals not complementary | Wiring fault or failing relay/switch on the start-stop input circuit between the EMCP control panel and engine ECM, corroded connector pins | Check start/stop wiring harness and connectors between control panel and ECM, verify both input signals switch together, clear code and reset the control panel after repair |
| 100/542/543-03 or -04 (CID 0100, 0542, 0543 / FMI 03-04) | Engine oil pressure sensor (unfiltered or filtered) circuit open or shorted | Open circuit, short to battery, or short to ground on the oil pressure sensor wiring; failed sensor | Inspect oil pressure sensor connector and harness for damage, check circuit continuity and voltage against spec, replace sensor if circuit tests good but reading stays abnormal |
| 110-03 or -04 (CID 0110 / FMI 03-04) | Engine coolant temperature sensor circuit open or shorted | Damaged sensor wiring, corroded connector, or failed coolant temperature sensor | Check sensor wiring and connector, test sensor resistance against temperature chart, replace sensor if out of spec, verify coolant level and system operation after repair |
| 168-01 or -02 (CID 0168 / FMI 01-02) | System/battery voltage low or intermittent-erratic | Weak or discharged starting battery, loose or corroded battery cable/ground, faulty charging alternator | Test battery voltage and state of charge, inspect battery cables and ground straps for corrosion, check charging alternator output, load-test battery and replace if it fails |
| 190-08 (CID 0190 / FMI 08) | Engine speed signal abnormal | Faulty or misaligned engine speed/timing sensor, damaged wiring, debris or excessive gap at the sensor tip | Inspect speed sensor wiring and connector, check sensor air gap and mounting, clean or replace sensor, clear code and confirm stable speed signal on the next start |
| Cylinder [##] Open - Reduce Power Now | Open circuit detected on an individual cylinder's injector/status circuit | Intermittent open connection in the injector wiring harness or connector for the affected cylinder, often due to vibration or corrosion | With the engine safely down, wiggle-test the harness and connector at the affected cylinder to find the intermittent break, repair or replace the connector/harness section; alarm typically stays logged until the next engine restart |
| 650 | Electronic drive/power relay related fault (exact meaning varies by control system configuration) | Faulty relay, wiring fault, or sensor input feeding the affected circuit | Check related sensor and relay wiring for damage or corrosion, verify supply voltage to the affected module, consult the control panel's fault code table for the exact circuit before replacing parts |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PM3516 attachments & work tools
Machine type and work-tool applicability
The PM3516 is a Cat power module built around the 3516 diesel engine, packaged for land drilling rigs and stationary/rental power generation, not an excavator, loader, or dozer chassis. It does not take ground-engaging work tools, buckets, blades, or quick-coupler attachments; there is no bucket/coupler compatibility list for this model.
Engine and rating configuration
Builds on the 3516 diesel platform in mechanical-drive and electric-drive (land electric drilling module) arrangements, with published module ratings around 1200 to 1383 bkW depending on the specific electric-drive variant and rpm setting. Diesel generator-set versions of the base 3516 engine are commonly rated in the 1450 to 1750 kW class; confirm the exact rating against the nameplate, since figures vary by configuration/series.
Switchgear and control panel options
Factory and dealer option lists show low-voltage switchgear panels and control/instrument panels (AR-Switchgear, AR-Monitor, AR-Utility, GP-Control, GP-Instrument type panels) attached to the power module skid. EMCP-family control panels are used across the 3516 generator-set line for monitoring, protection, and paralleling functions.
Cooling system configuration
Cooling arrangements are offered as radiator-type or remote/rig-mounted cooling packages depending on drilling-rig or genset installation, matched to ambient and enclosure requirements. Exact cooling package details are site- and order-specific; verify against the module's build sheet.
Generator, alternator, and electrical options
On the generator-set side of the 3516 family, options include alternator air cleaners, anti-condensation heaters, winding/bearing temperature monitoring, and choice of excitation system (permanent-magnet or internal excitation), plus busbar connection options for output wiring. These are electrical accessories, not mechanical work tools.
Enclosure and guarding options
Skid- or trailer-mounted enclosures with weather protection and sound attenuation are offered for genset applications in this power class, with guarding/access panels sized to the module footprint. Enclosure spec (open skid vs sound-attenuated) varies by configuration/series and by dealer package.
All PM3516 assemblies by section
Every catalogued assembly group for the Caterpillar PM3516. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
107-7197 Aftercooler Gp-Treated Water
| 10***58 | Seal; (Aftercooler) | 4 |
| 10***97 | Aftercooler Group-Treated Water | 1 |
| 11***59 | Core As-Aftercooler | 2 |
208-9067 Air Cleaner Gp -Dual Element
| 20***64 | Cover | 1 |
| 20***65 | Filter Element As-Air; (Primary) | 1 |
| 20***66 | Filter Element As-Air; (Secondary) | 1 |
7n-6782 Indicator Gp-Air Filter Change
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
| 5L***33 | Fitting (To Air Cleaner) | 2 |
| 6I***33 | Indicator Group-Air Filter Change | 2 |
208-0821 Lines Gp-Air -Turbocharger
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 8 |
| 11***27 | Tube As | 2 |
| 16***77 | Hose; (Hump) | 2 |
198-9918 Lines Gp-Turbocharger Air -Aftercooler
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 38 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
111-6786 Manifold Gp-Exhaust
| 10***79 | Sleeve-Elbow Support | 2 |
| 11***30 | Manifold-Exhaust; (Intermediate) | 2 |
| 11***31 | Manifold-Exhaust; (Intermediate) | 2 |
212-4620 Mounting Gp-Air Cleaner -Dual Element
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 8 |
| 20***67 | Air Cleaner Group; -Dual Element | 2 |
| 20***51 | Hose | 2 |
205-2939 Muffler Gp
| 14***68 | Strap-Muffler | 2 |
| 16***12 | Muffler As | 1 |
| 16***14 | Insulation | 1 |
183-1201 Muffler Gp
| 14***96 | Insulation As | 2 |
| 15***69 | Insulation As | 2 |
| 16***16 | Fitting-Exhaust | 2 |
205-2940 Muffler Gp
| 14***68 | Strap-Muffler | 2 |
| 16***13 | Muffler As | 1 |
| 16***15 | Insulation | 1 |
118-5463 Turbocharger Gp
| 11***63 | Turbocharger Group | 1 |
| 12***36 | Gasket; (Turbocharger) | 4 |
| 24***39 | Turbocharger Group | 4 |
245-4339 Turbocharger Gp
| 20***50 | Cover-Compressor | 1 |
| 24***39 | Turbocharger Group | 1 |
| 24***18 | Cartridge Group-Turbocharger | 1 |
Basic Engine
253-2468 Barring Gp -Rh
| 25***68 | Barring Group; -Rh | 1 |
| 3R***37 | Device-Barring | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
247-8341 Base Gp-Valve Cover
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
106-4595 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***95 | Camshaft Group | 1 |
| 12***60 | Camshaft As; (Rear, Rh) | 1 |
153-0395 Coupling Gp-Generator
| 15***95 | Coupling Group-Generator | 1 |
| 5N***93 | Plate Group-Generator Coupling | 1 |
| 5N***79 | Shim .80mm(.031in)Thk | 3 |
3n-8594 Cover Gp-Engine Lifting Eye
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 1 |
| 3N***93 | Cover-Eye | 1 |
| 3N***94 | Cover Group | 1 |
121-3551 Cover Gp-Cylinder Block -Central Structure
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
7e-6432 Cover Gp-Flywheel Housing -Rear Structure
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 22 |
107-0278 Cover Gp-Front Housing
| 10***78 | Cover Group-Front Housing | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 27 |
| 23***46 | Seal-O-Ring | 2 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
8n-0337 Crankshaft Gp
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 48 |
| 12***88 | Crankshaft As | 1 |
| 14***31 | Bearing As-Main; (Standard) | 9 |
101-1173 Cylinder Block As
| 10***73 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
350-1393 Cylinder Block As
| 22***96 | Cap-Crankshaft Bearing | 9 |
| 35***93 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 4 |
350-1417 Cylinder Block As
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
| 33***50 | Seal-Liner | 16 |
353-3971 Cylinder Block Gp
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 6 |
| 2W***40 | Plug-Oil Manifold | 8 |
| 35***93 | Cylinder Block As | 1 |
240-6653 Cylinder Block Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 10***98 | Bearing-Camshaft | 18 |
| 11***94 | Plate-Spacer | 16 |
242-5328 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 19***95 | Guide-Valve; (Standard)(Exhaust) | 2 |
154-1612 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
317-2440 Cylinder Head Gp
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
101-0830 Cylinder Head Gp
| 10***30 | Cylinder Head Group | 1 |
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
146-3740 Damper Gp
| 14***40 | Damper Group | 1 |
| 15***63 | Washer; (10.35x16x2-mm Thk) | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
8n-0339 Damper Gp
| 14***40 | Damper Group | 1 |
| 1N***82 | Adapter | 1 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
268-4442 Drain Gp-Engine Oil
| 26***42 | Drain Group-Engine Oil | 1 |
| 28***50 | Hose As | 1 |
| 2P***84 | Union | 1 |
107-7361 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 10***66 | Gear-Accessory Drive; (55-Teeth) | 1 |
7e-7647 Drive Gp-Accessory -Lower, Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 12***00 | Bearing-Sleeve | 1 |
7n-4851 Flywheel Gp
| 24***16 | Flywheel As | 1 |
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 7N***51 | Flywheel Group; Flywheel Group | 1 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
101-0835 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***42 | Gear-Camshaft Drive; (70-Teeth), . Cover (L) | 1 |
| 10***35 | Gear Group-Rear; -Cam Drive | 1 |
271-9270 Guard Gp-Belt -Alternator
| 11***43 | Seal-O-Ring | 2 |
| 26***27 | Plate As | 1 |
| 27***70 | Guard Group-Belt; -Alternator | 1 |
151-9228 Guard Gp-Belt -Alternator
| 15***28 | Guard Group-Belt; -Alternator | 1 |
| 17***59 | Guard As-Belt; (Alternator) | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 1 |
197-9052 Guard Gp-Damper
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 19***51 | Guard As-Damper | 1 |
297-7000 Housing Gp-Flywheel
| 1D***90 | Bolt 4.75 In.(120.65 mm) Long | 16 |
| 22***20 | Housing-Flywheel | 1 |
| 29***00 | Housing Group-Flywheel | 1 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
7e-6872 Lifting Gp-Engine
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 15***26 | Bracket As | 2 |
| 19***86 | Retainer-Eye; (Rear) | 1 |
7c-4711 Pan Gp-Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 18 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 50 |
9y-3082 Pan Gp-Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
281-6139 Piston & Rod Gp
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
7w-3813 Seal Gp-Crankshaft
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
8n-8510 Valve Gp-Explosion Relief
| 27***59 | Seal | 2 |
| 2W***84 | Kit-Repair; (Explosion Relief)(Crankcase) | 1 |
| 8N***09 | Valve Group-Explosion Relief; (Crankcase) | 2 |
224-9869 Valve Mechanism Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 10***77 | Retainer-Spring | 1 |
Cooling System
190-1328 Baffle Gp-Radiator
| 18***27 | Channel | 2 |
| 19***26 | Baffle As | 1 |
| 19***27 | Baffle As | 1 |
236-8821 Connection Gp-Water -Lh
| 00***70 | Nipple-Strainer To Flange | 2 |
| 11***56 | Bushing-Reducer | 1 |
| 1L***31 | Tee-Service | 1 |
8n-9161 Connection Gp-Water -Outlet
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
4w-5891 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***32 | Seal-O-Ring | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
215-2411 Cooling Ar
| 18***01 | Isolator | 4 |
| 19***76 | Lines Group-Vent | 1 |
| 19***28 | Baffle Group-Radiator | 1 |
202-2836 Drain Gp-Coolant
| 16***61 | Screw; (5/16x1.25-In) | 2 |
| 19***89 | Hose As | 1 |
| 19***91 | Pipe | 1 |
192-0788 Drain Gp-Coolant
| 19***88 | Drain Group-Coolant | 1 |
| 20***36 | Drain Group-Coolant | 1 |
| 20***37 | Drain Group-Coolant | 1 |
202-2838 Drain Gp-Coolant
| 16***61 | Screw; (5/16x1.25-In) | 2 |
| 19***94 | Pipe | 1 |
| 19***38 | Hose As | 1 |
202-2837 Drain Gp-Coolant
| 16***61 | Screw; (5/16x1.25-In) | 2 |
| 19***89 | Hose As | 1 |
| 19***93 | Pipe | 1 |
216-6217 Housing & Regulator Gp -Aftercooler
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 21***28 | Housing | 1 |
| 21***29 | Adapter | 1 |
190-0376 Lines Gp-Vent
| 19***76 | Lines Group-Vent | 1 |
| 20***78 | Hose As | 1 |
| 20***80 | Hose As, . Cover | 1 |
115-7850 Lines Gp-Water -Lower
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
208-0822 Lines Gp-Water -Aftercooler
| 03***78 | Connector-Filtered Fuel To Adapter | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
102-3516 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 38 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 62 |
| 10***16 | Lines Group-Water; -Upper | 1 |
7c-8122 Lines Gp-Water -Bypass
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 18 |
202-6717 Lines Gp-Water -Scac
| 12***30 | Gasket | 1 |
| 14***09 | Bolt; (Self-Tapping) | 4 |
| 19***38 | Hose As | 2 |
202-6716 Lines Gp-Water -Jacket Water
| 14***09 | Bolt; (Self-Tapping) | 12 |
| 18***85 | Tube As | 1 |
| 18***26 | Tube As | 1 |
9y-8175 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***32 | Seal-O-Ring; (234.54mm Id) | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
291-4311 Pump Gp-Auxiliary Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***79 | Shaft; (14-Teeth) | 1 |
9y-8176 Pump Gp-Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 3J***89 | Plug Fuel Pump Bracket Turbocharger Oil Hole | 1 |
2w-9729 Pump Gp-Water
| 14***62 | Seal-O-Ring | 1 |
| 21***77 | Pump Group-Water | 1 |
| 2W***29 | Pump Group-Water; Water Pump Group | 1 |
212-8177 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
208-6899 Radiator Gp
| 12***69 | Hose-Hydraulic; (199-In) | 0 |
| 12***28 | Bearing | 2 |
| 12***46 | Sheave | 1 |
9y-9171 Housing & Regulator Gp -Outlet Control
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***74 | Valve As-Vent Line | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
Electrical And Starting System
5n-5692 Alternator Gp-Charging
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
| 3E***54 | Fan-Alternator; (11-Blade) | 1 |
122-1194 Box & Mounting Gp -Cable Access
| 12***94 | Box & Mounting Group; -Cable Access | 1 |
| 12***33 | Frame As-Box | 1 |
| 12***35 | Cover-Top | 1 |
357-3040 Box & Mounting Gp -Cable Access
| 10***46 | Fastener | 4 |
| 12***35 | Cover-Top | 1 |
| 12***36 | Cover-Bottom | 1 |
300-3508 Box Gp-Control -Jacket Water Heater
| 17***09 | Block-Terminal | 2 |
| 30***08 | Box Group-Control; -Jacket Water Heater | 1 |
| 30***09 | Box As | 1 |
245-0035 Box Gp-Electronic
| 10***38 | End-Wire; (16-Ga) | 6 |
| 11***14 | End-Wire; (18-Ga) | 40 |
| 11***97 | End-Wire; (14-Ga) | 4 |
216-7933 Box Gp-Extension Terminal -Circuit Breaker
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 10 |
| 21***33 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
361-2595 Box Gp-Extension Terminal
| 12***37 | Panel As | 1 |
| 35***40 | Box & Mounting Group; -Cable Access | 1 |
| 36***95 | Box Group-Extension Terminal | 1 |
115-2513 Box Gp-Extension Terminal -Circuit Breaker
351-7361 Box Gp-Extension Terminal -Side
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 79 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
| 35***15 | Box As-Extension | 1 |
357-3045 Box Gp-Generator Connection
| 03***84 | Plug 12.7 mm(.50 In.) Dia. | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 18 |
141-1809 Box Gp-Generator Connection
| 03***84 | Plug 12.7 mm(.50 In.) Dia. | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 18 |
252-7458 Bus Bar As
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 6 |
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 12 |
| 25***58 | Bus Bar As | 1 |
278-4973 Bus Bar Gp-Box -Side Extension, Nema
| 24***60 | Support-Bus | 1 |
| 24***61 | Bracket | 8 |
| 24***62 | Bracket | 2 |
311-7115 Bus Bar Gp-Generator -Nema
| 27***36 | Bar-Bus; (Customer Connection) | 4 |
| 29***73 | Bracket | 3 |
| 31***15 | Bus Bar Group-Generator; -Nema | 1 |
122-0332 Cable Gp -Circuit Breaker Connection
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 12***95 | Cable As-Extension | 24 |
| 12***32 | Cable Group; -Circuit Breaker Connection | 1 |
252-7533 Circuit Breaker Gp
| 25***57 | Bus As; (3200-Ampere) | 2 |
| 25***29 | Circuit Breaker As; (3200-Ampere) | 1 |
| 25***33 | Circuit Breaker Group | 1 |
252-7530 Circuit Breaker Gp
| 25***58 | Bus Bar As | 2 |
| 25***30 | Circuit Breaker Group | 1 |
| 27***58 | Circuit-Breaker; (1600-Ampere) | 1 |
252-7532 Circuit Breaker Gp
| 25***58 | Bus Bar As | 2 |
| 25***32 | Circuit Breaker Group | 1 |
| 27***60 | Circuit Breaker As; (2500-Ampere) | 1 |
121-9638 Connection Gp-Electrical -Basic
| 12***38 | Connection Group-Electrical; -Basic | 1 |
| 17***00 | Strip Group-Terminal; -Main | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 2 |
264-0586 Connection Gp-Electrical
| 12***39 | Connection Group-Electrical; -Thermocouple | 1 |
| 26***86 | Connection Group-Electrical | 1 |
264-0587 Connection Gp-Electrical -Rtd
| 12***40 | Connection Group-Electrical; -Rtd | 1 |
| 26***87 | Connection Group-Electrical; -Rtd | 1 |
257-9401 Connection Gp-Electrical
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 22***53 | Relay; (24-Volt)(Space Heater) | 1 |
| 22***54 | Socket-Relay | 1 |
121-9639 Connection Gp-Electrical -Thermocouple
| 12***38 | Connection Group-Electrical; -Basic | 1 |
| 12***39 | Connection Group-Electrical; -Thermocouple | 1 |
| 17***95 | Strip Group-Terminal; -Thermocouple | 1 |
218-4826 Connection Gp-Electrical -Terminal Block, Rtd
| 17***96 | Strip Group-Terminal; -Rtd | 1 |
| 20***44 | Transformer As-Current | 1 |
| 21***26 | Connection Group-Electrical; -Terminal Block, Rtd | 1 |
121-9640 Connection Gp-Electrical -Rtd
| 12***38 | Connection Group-Electrical; -Basic | 1 |
| 12***40 | Connection Group-Electrical; -Rtd | 1 |
| 17***96 | Strip Group-Terminal; -Rtd | 1 |
249-7649 Connector As -Resistive Temperature Device
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 24 |
| 24***49 | Connector As; -Resistive Temperature Device | 1 |
| 3E***67 | Ring-Retaining | 1 |
220-2677 Control & Mtg Gp-Engine Elek -Primary
| 11***49 | Bracket-Module | 1 |
| 15***76 | Mount-Isolation | 8 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 7 |
5n-0591 Control Gp-Manual Voltage
| 5N***91 | Control Group-Electronic | 1 |
| 5N***03 | Varistor As | 1 |
| 5N***05 | Plate-Switch | 1 |
206-2711 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 20***11 | Control Group-Engine Electronic | 1 |
| 32***12 | Control Group-Engine Electronic | 1 |
307-3276 Element Gp-Jacket Water Heater
| 16***82 | Seal | 1 |
| 21***16 | Screw-Pan Head; (8-16x0.5-In) | 4 |
| 30***76 | Line, Pipe; Suction, Element Group-Jacket Water Heater, Line | 1 |
252-7409 Fastener Gp-Wiring Harness -Low Voltage
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 26 |
| 25***09 | Fastener Group-Wiring Harness; -Low Voltage | 1 |
| 29***52 | Mounting-Cable Tie | 13 |
128-1479 Frame Gp-Generator Connection
| 12***79 | Frame Group-Generator Connection; -Generator Connection | 1 |
| 1D***72 | Bolt-Carriage; (1/2-13x5.5-In) | 6 |
| 5S***03 | Nut-Full; (5/16 X 18 Thd) | 6 |
357-3041 Frame Gp-Generator Connection
| 1D***72 | Bolt-Carriage; (1/2-13x5.5-In) | 6 |
| 23***54 | Fastener | 12 |
| 35***41 | Frame Group-Generator Connection | 1 |
312-6114 Ground Gp-Electrical
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
| 22***98 | Film-Ground; (Earth) | 1 |
| 25***13 | Harness As-Wiring; (Ground) | 1 |
126-9191 Ground Gp-Electrical -Alternator
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 12***87 | Mount-Flexible | 1 |
| 12***88 | Bracket | 1 |
341-0609 Harness As-Engine
| 09***15 | Terminal-Ring; (18-Ga To 22-Ga, 1/4-In Screw) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
244-5404 Harness As-Panel
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 13***53 | Receptacle As-Connector; (70-Pin) | 1 |
242-9752 Harness As-Power -Digital Voltage Regulator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Terminal As-Ring | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
279-0496 Harness As-Sensor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
279-0497 Harness As-Sensor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
243-4271 Harness As-Wiring -Generator Terminal Strip
| 23***56 | Plug-Connector; (6-Pin) | 1 |
| 23***57 | Plug-Connector; (9-Pin) | 1 |
| 23***58 | Plug-Connector; (12-Pin) | 1 |
240-6834 Harness As-Wiring -Emcp Ii
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 10 |
| 24***34 | Harness As-Wiring; -Emcp Ii | 1 |
240-6833 Harness As-Wiring -Ignition, Lh
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 6 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
242-3100 Harness As-Wiring -Generator Terminal Strip
| 10***38 | End-Wire; (16-Ga) | 24 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 15***66 | Wedge-Plug Lock; (3-Pin) | 1 |
242-3104 Harness As-Wiring -Generator Terminal Strip
| 10***38 | End-Wire; (16-Ga) | 22 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
244-5403 Harness As-Wiring
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 15 |
307-3264 Heater Gp-Jacket Water
| 14***85 | Pump; (Circulation) | 1 |
| 19***43 | Kit-Clamp; (Jacket Water Heater) | 1 |
| 30***06 | Kit-Flange; (Jacket Water Heater) | 1 |
269-7022 Lighting Gp-Generator -Panel Lights
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***69 | Terminal-Blade; (14-Ga To 16-Ga) | 2 |
| 26***22 | Lighting Group-Generator; -Panel Lights | 1 |
274-8068 Module Gp-Interface
| 27***68 | Module Group-Interface | 1 |
213-0420 Mounting Gp -Switch Gear
| 15***46 | Isolator | 6 |
| 21***20 | Mounting Group; -Switch Gear | 1 |
| 7X***87 | Washer; (10.26x22.22x1.9-mm Thk) | 6 |
122-3488 Mounting Gp-Circuit Breaker
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 12***88 | Mounting Group-Circuit Breaker | 1 |
| 12***29 | Bracket | 1 |
270-4654 Mounting Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 27***48 | Bracket | 1 |
| 27***54 | Mounting Group-Circuit Breaker | 1 |
252-7525 Mounting Gp-Circuit Breaker
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 25***21 | Support | 2 |
| 25***22 | Panel | 1 |
208-1195 Mounting Gp-Circuit Breaker
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 4 |
| 20***95 | Mounting Group-Circuit Breaker | 1 |
| 5S***03 | Nut-Full; (5/16 X 18 Thd) | 4 |
122-0319 Mounting Gp-Circuit Breaker
| 11***13 | Box Group-Extension Terminal; -Circuit Breaker | 1 |
| 12***93 | Bracket As-Circuit Breaker; -Circuit Breaker | 1 |
| 12***19 | Mounting Group-Circuit Breaker | 1 |
269-3352 Mounting Gp-Jacket Wtr Heater -Lh
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 26***52 | Mounting Group-Jacket Wtr Heater; -Lh | 1 |
| 26***95 | Hose As | 1 |
252-7367 Mounting Gp-Panel -Interface Module
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 10 |
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 10 |
| 25***67 | Mounting Group-Panel; -Interface Module | 1 |
141-1810 Mounting Gp-Transformer
| 14***10 | Mounting Group-Transformer | 1 |
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 2 |
| 5P***15 | Washer-Mount 9w***75 Fuel Level Sensor | 4 |
122-0317 Panel As-Box -Circuit Breaker
| 12***17 | Panel As-Box; -Circuit Breaker | 1 |
| 12***40 | Panel-Circuit Breaker | 1 |
| 7W***91 | Seal (104 cm) | 0 |
252-7535 Panel Gp-Circuit Breaker -Cover
| 10***45 | Bolt-Flange Head; (5/16-18x0.625-In) | 12 |
| 25***23 | Panel | 1 |
| 25***35 | Panel Group-Circuit Breaker; -Cover | 1 |
237-8999 Panel Gp-Circuit Breaker -Power Distribution
| 06***88 | Locknut; (1-11-1/2-Thd) | 2 |
| 11***70 | Bushing; (Capped) | 2 |
| 1F***22 | Washer; (0.156x0.97x0.049-In Thk) | 4 |
307-9794 Cover-Extension Box
| 30***94 | Plate-Cover, Twelve Point Cap Screw | 1 |
252-7438 Plug Gp-Box
| 25***38 | Plug Group-Box; -Electrical Connector | 1 |
| 4F***11 | Plug 3.5 cm(1.37 In.) Hole; Plug-- To Support Assembly | 1 |
189-5746 Sensor Gp-Speed -Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
273-5041 Sensor Gp-Speed
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
141-4158 Sensor Gp-Temperature -Generator Bearing
| 14***58 | Sensor Group-Temperature; -Generator Bearing | 1 |
259-2168 Sensor Gp-Temperature
| 19***50 | Sensor Group-Temperature; -Engine Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 25***68 | Sensor Group-Temperature; -Engine Oil | 1 |
195-2150 Sensor Gp-Temperature -Air Inlet
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
141-4159 Sensor Gp-Temperature -Generator Bearing
| 14***59 | Sensor Group-Temperature; -Generator Bearing | 1 |
6i-4906 Sensor Gp-Temperature -Generator Bearing
| 11***22 | Sender As-Temperature; (100-Ohm)(Generator Bearing) | 1 |
| 11***99 | Strip-Terminal | 1 |
| 11***46 | Strip-Terminal | 1 |
141-4160 Sensor Gp-Temperature -Generator Bearing
| 14***60 | Sensor Group-Temperature; -Generator Bearing | 1 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
270-8373 Sensor Gp-Temperature -Generator Bearing
| 27***73 | Sensor Group-Temperature; -Generator Bearing | 1 |
| 27***87 | Sensor-Temperature; (Generator Bearing) | 1 |
| 27***88 | Kit-Wiring; -Bearing Temperature Sensor | 1 |
6i-4907 Sensor Gp-Temperature -Generator Bearing
| 11***99 | Strip-Terminal | 1 |
| 11***46 | Strip-Terminal | 1 |
| 11***47 | Cover | 1 |
8n-3896 Starting Motor Gp-Electric -Dual
| 3L***36 | Spacer-Bracket To Diesel Water Passage Cover | 1 |
| 3L***04 | Shield-Terminal | 4 |
| 3L***34 | Terminal-Ring; (0000-Ga, 1/2-In Screw) | 2 |
6v-0927 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
244-9607 Strip Gp-Terminal -Switchgear
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 24***07 | Strip Group-Terminal; -Switchgear | 1 |
| 31***98 | Block-Terminal; (600-Volt, 25-Ampere) | 33 |
170-5395 Strip Gp-Terminal -Thermocouple
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 17***95 | Strip Group-Terminal; -Thermocouple | 1 |
| 31***98 | Block-Terminal; (600-Volt, 25-Ampere) | 30 |
244-9603 Strip Gp-Terminal -Dc
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 19***51 | Block-Terminal; (300-Volt, 8-Ampere) | 1 |
| 24***03 | Strip Group-Terminal; -Dc | 1 |
244-9602 Strip Gp-Terminal -Ac
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
170-5400 Strip Gp-Terminal -Main
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 15***55 | Fuse; (10-Ampere) | 2 |
| 17***00 | Strip Group-Terminal; -Main | 1 |
170-5396 Strip Gp-Terminal -Rtd
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 17***96 | Strip Group-Terminal; -Rtd | 1 |
| 31***98 | Block-Terminal; (600-Volt, 25-Ampere) | 34 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
240-0740 Switch Gp-Disconnect -Battery
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
169-5384 Switch Gp-Remote -Starting
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
| 16***84 | Switch Group-Remote; -Starting | 1 |
| 16***85 | Bracket-Switch | 1 |
120-4498 Thermocouple Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***98 | Thermocouple Group; -Exhaust | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
122-6586 Transformer As-Current
| 12***86 | Transformer As-Current | 1 |
128-0116 Transformer As-Current
| 12***16 | Transformer As-Current | 1 |
128-0115 Transformer As-Current
| 12***15 | Transformer As-Current | 1 |
122-6589 Transformer As-Current
| 12***89 | Transformer As-Current | 1 |
128-0795 Transformer As-Current
| 12***95 | Transformer As-Current | 1 |
122-6590 Transformer As-Current
| 12***90 | Transformer As-Current; (3000:5 Ratio)(3000:5) | 1 |
119-0976 Transformer As-Current
| 11***76 | Transformer As-Current | 1 |
117-9724 Transformer As-Current
| 11***24 | Transformer As-Current | 1 |
137-0259 Transformer As-Current
| 13***59 | Transformer As-Current | 1 |
119-0977 Transformer As-Current
| 11***77 | Transformer As-Current | 1 |
122-6587 Transformer As-Current
| 12***87 | Transformer As-Current | 1 |
117-9721 Transformer As-Current
| 11***21 | Transformer As-Current | 1 |
117-9722 Transformer As-Current
| 11***22 | Transformer As-Current | 1 |
122-6585 Transformer As-Current
| 12***85 | Transformer As-Current | 1 |
204-3544 Transformer As-Current
| 20***44 | Transformer As-Current | 1 |
117-9723 Transformer As-Current
| 11***23 | Transformer As-Current | 1 |
122-6591 Transformer As-Current
| 12***91 | Transformer As-Current | 1 |
122-6588 Transformer As-Current
| 12***88 | Transformer As-Current | 1 |
144-9065 Transformer Gp-Current -Droop
| 11***23 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***65 | Transformer Group-Current; -Droop | 1 |
144-9056 Transformer Gp-Current
| 11***24 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***56 | Transformer Group-Current | 1 |
144-9059 Transformer Gp-Current
| 12***89 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***59 | Transformer Group-Current | 1 |
144-9061 Transformer Gp-Current
| 12***91 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***61 | Transformer Group-Current | 1 |
229-5838 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 6 |
| 12***86 | Transformer As-Current | 3 |
| 20***79 | Harness As-Wiring; (Current Transformer) | 1 |
264-1069 Transformer Gp-Current
| 14***65 | Transformer Group-Current; -Droop | 1 |
| 26***69 | Transformer Group-Current | 1 |
229-5837 Transformer Gp-Current
| 10***38 | End-Wire; (16-Ga) | 6 |
| 12***85 | Transformer As-Current | 3 |
| 20***79 | Harness As-Wiring; (Current Transformer) | 1 |
144-9060 Transformer Gp-Current -Droop
| 12***90 | Transformer As-Current; (3000:5 Ratio)(3000:5) | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***60 | Transformer Group-Current; -Droop | 1 |
144-9062 Transformer Gp-Current -Droop
| 12***15 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***62 | Transformer Group-Current; -Droop | 1 |
264-1066 Transformer Gp-Current
| 14***60 | Transformer Group-Current; -Droop | 1 |
| 26***66 | Transformer Group-Current | 1 |
264-1067 Transformer Gp-Current
| 14***62 | Transformer Group-Current; -Droop | 1 |
| 26***67 | Transformer Group-Current | 1 |
144-9064 Transformer Gp-Current
| 11***22 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***64 | Transformer Group-Current | 1 |
144-9068 Transformer Gp-Current
| 12***95 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 14***68 | Transformer Group-Current | 1 |
288-1186 Transformer Gp-Current
| 12***15 | Transformer As-Current | 4 |
| 28***86 | Transformer Group-Current | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
128-8014 Transformer Gp-Potential
| 12***46 | Resistor | 1 |
| 12***80 | Bracket As-Transformer | 1 |
| 12***14 | Transformer Group-Potential | 1 |
154-3477 Transformer Gp-Potential
| 15***71 | Shelf; (Transformer) | 1 |
| 15***77 | Transformer Group-Potential | 1 |
| 15***88 | Transformer As; (Low Voltage) | 2 |
154-3478 Transformer Gp-Potential
| 15***71 | Shelf; (Transformer) | 1 |
| 15***78 | Transformer Group-Potential | 1 |
| 20***18 | Transformer As; (Potential) | 2 |
264-1455 Transformer Gp-Potential
| 15***77 | Transformer Group-Potential | 1 |
| 26***55 | Transformer Group-Potential | 1 |
178-7193 Transformer Gp-Potential
| 15***71 | Shelf; (Transformer) | 1 |
| 17***93 | Transformer Group-Potential | 1 |
| 20***18 | Transformer As; (Potential) | 3 |
119-0978 Transformer-Current
| 11***78 | Transformer-Current; (Ratio 800:5) | 1 |
133-6468 Wire As-Ground
| 13***68 | Wire As-Ground | 1 |
241-0243 Wiring Gp-Alternator
| 20***86 | Circuit Breaker As; (70-Ampere)(Alternator) | 1 |
| 24***43 | Wiring Group-Alternator | 1 |
| 24***44 | Wire As | 1 |
242-7068 Wiring Gp-Electric Starting
| 24***62 | Wire As | 1 |
| 24***68 | Wiring Group-Electric Starting; -Dual Starting Motor | 1 |
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 2 |
241-0235 Wiring Gp-Electric Starting
| 20***87 | Circuit Breaker As; (40-Ampere)(Starting Motor) | 1 |
| 24***35 | Wiring Group-Electric Starting; -Single Motor | 1 |
| 24***36 | Wire As | 1 |
145-5138 Wiring Gp-Electronic Control
| 12***30 | Harness As-Power; -Digital Voltage Regulator | 1 |
| 14***38 | Wiring Group-Electronic Control | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 5 |
237-9017 Wiring Gp-Engine
| 12***74 | Cover-Connector; (Wire Router) | 2 |
| 23***99 | Panel Group-Circuit Breaker; -Power Distribution | 1 |
| 23***17 | Wiring Group-Engine | 1 |
237-9016 Wiring Gp-Engine
| 00***40 | Connector; (Flared) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 17 |
312-5082 Wiring Gp-Engine -Engine Interconnect
| 03***43 | Screw; (1/4-20x0.625-In) | 3 |
| 12***84 | Tube-Heat Shrink; (3.2-mm Dia)(6.5-cm Each) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
278-4899 Wiring Gp-Generator -Voltage Regulator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***38 | End-Wire; (16-Ga) | 1 |
243-4269 Wiring Gp-Generator
| 10***38 | End-Wire; (16-Ga) | 9 |
| 24***69 | Wiring Group-Generator | 1 |
| 24***01 | Harness As-Wiring; (Vr6 Voltage Regulator) | 1 |
242-7960 Wiring Gp-Generator
| 24***00 | Harness As-Wiring; -Generator Terminal Strip | 1 |
| 24***60 | Wiring Group-Generator | 1 |
245-0092 Wiring Gp-Generator -Main
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 15 |
241-3379 Wiring Gp-Generator
| 10***38 | End-Wire; (16-Ga) | 10 |
| 12***70 | Potentiometer; (10,000-Ohm)(Voltage Adjustment) | 1 |
| 24***68 | Harness As-Wiring; (Voltage Adjustment) | 1 |
278-4897 Wiring Gp-Generator -Voltage Sensing
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 10***38 | End-Wire; (16-Ga) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
166-8368 Wiring Gp-Generator
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***38 | End-Wire; (16-Ga) | 32 |
| 10***39 | End-Wire; (12-Ga) | 8 |
242-7961 Wiring Gp-Generator
| 24***04 | Harness As-Wiring; -Generator Terminal Strip | 1 |
| 24***61 | Wiring Group-Generator | 1 |
| 24***52 | Harness As-Power; -Digital Voltage Regulator | 1 |
267-8475 Wiring Gp-Generator -Voltage Adjust Switch
| 11***84 | Switch As-Toggle; (Momentary)(Manual Engine Speed Control) | 1 |
| 11***14 | End-Wire; (18-Ga) | 3 |
| 26***67 | Harness As-Switch; (Voltage Adjust) | 1 |
252-7480 Wiring Gp-Generator -Annunciator Harness
| 24***00 | Harness As-Wiring; (Annunciator) | 1 |
| 25***80 | Wiring Group-Generator; -Annunciator Harness | 1 |
241-3378 Wiring Gp-Generator
| 10***38 | End-Wire; (16-Ga) | 3 |
| 11***84 | Switch As-Toggle; (Momentary)(Manual Engine Speed Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
278-4895 Wiring Gp-Generator -Current Transformer
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
243-4285 Wiring Gp-Generator
| 11***84 | Switch As-Toggle; (Momentary)(Manual Engine Speed Control) | 1 |
| 24***71 | Harness As-Wiring; -Generator Terminal Strip | 1 |
| 24***85 | Wiring Group-Generator | 1 |
252-7362 Wiring Gp-Panel -Discrete I/O, Rtd
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 2 |
241-0231 Wiring Gp-Panel -Prelubrication
| 20***87 | Circuit Breaker As; (40-Ampere)(Starting Motor) | 1 |
| 24***31 | Wiring Group-Panel; -Prelubrication | 1 |
| 24***36 | Wire As | 1 |
352-0120 Wiring Gp-Panel
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
252-7345 Wiring Gp-Panel
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
| 25***45 | Wiring Group-Panel; -Rtd Module | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 4 |
352-0122 Wiring Gp-Panel
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
120-4492 Wiring Gp-Pyrometer
| 12***67 | Harness As-Wiring; (Pyrometer) | 1 |
| 12***92 | Wiring Group-Pyrometer | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 16 |
246-9375 Wiring Gp-Sensor -Coolant Level, Oil Temperature
| 24***50 | Harness As-Sensor; (Coolant Level) | 1 |
| 24***75 | Wiring Group-Sensor; -Coolant Level, Oil Temperature | 1 |
| 25***88 | Harness As-Sensor; (Engine Oil Temperature) | 1 |
252-7558 Wiring Gp-Shutoff -Emergency Stop
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***23 | Block-Contact; (1-Pole)(Normally Open) | 1 |
| 12***76 | Cover; (Emergency Stop) | 1 |
Enclosures, Guards And Bases
245-0024 Cover Gp-Enclosure
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 4 |
| 24***36 | Roof; (Main) | 1 |
| 24***24 | Cover Group-Enclosure; -Top | 1 |
245-0013 Cover Gp-Generator -Rear
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 16 |
| 24***45 | Plate-Cover | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
245-0007 Cover Gp-Generator -Side
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 18 |
| 24***46 | Plate-Cover | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 2 |
141-4987 Cover Gp-Generator -Coupling
| 12***94 | Cover-Drip | 1 |
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 6 |
351-5793 Duct Gp-Cable
| 14***00 | Bellow-Cable | 1 |
| 14***04 | Flange-Bellow | 2 |
| 16***61 | Screw; (5/16x1.25-In) | 4 |
156-9155 Handle As
| 15***55 | Handle As; -Door | 1 |
203-0218 Latch Gp-Access Door
| 20***18 | Latch Group-Access Door; -Enclosure | 1 |
| 26***02 | Bracket-Latch | 3 |
| 26***03 | Latch | 2 |
245-0086 Mounting Gp-Rail
| 24***86 | Mounting Group-Rail | 1 |
| 24***09 | Support As; (Rh) | 1 |
| 24***10 | Support As; (Lh) | 1 |
233-9151 Panel As
| 15***39 | Panel; (Sound) | 2 |
| 18***77 | Nut; (5/16-18 Thd) | 36 |
| 23***51 | Panel As | 1 |
122-4869 Panel As-Enclosure -Extension Box
| 12***69 | Panel As-Enclosure; -Extension Box | 1 |
233-9152 Panel Gp-Sound Suppression
| 20***77 | Guard As | 1 |
| 20***78 | Guard As | 1 |
| 23***51 | Panel As | 1 |
245-8736 Rail Gp-Engine & Gen Support
| 23***07 | Rail As | 1 |
| 24***36 | Rail Group-Engine & Gen Support | 1 |
| 8T***94 | Washer; (3/4 Hardened) (Current Adapters) | 36 |
Engine Arrangement
289-0524 Engine Ar
| 10***30 | Cylinder Head Group | 16 |
| 10***31 | Cover Group-Valve Mechanism | 12 |
| 10***35 | Gear Group-Rear; -Cam Drive | 1 |
351-6961 General Ar
| 28***24 | Engine Ar | 1 |
| 35***61 | General Ar | 1 |
Fuel System
163-4757 Cooler Gp-Fuel
| 16***57 | Cooler Group-Fuel | 1 |
112-4922 Filter Gp-Fuel -Rh
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 11***22 | Filter Group-Fuel; -Rh | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
263-6853 Filter Gp-Fuel -Lh
| 03***36 | Tee-Flared | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
293-6573 Filter Gp-Water Sep & Fuel
| 29***71 | Filter Group-Water Sep & Fuel | 2 |
| 29***73 | Filter Group-Water Sep & Fuel | 1 |
293-6571 Filter Gp-Water Sep & Fuel
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 29***71 | Filter Group-Water Sep & Fuel | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
221-4259 Lines Gp-Fuel
| 20***88 | Hose As | 1 |
| 21***97 | Screw; (5/16-18x2.5-In) | 15 |
| 22***45 | Cover | 1 |
262-6761 Lines Gp-Fuel Injection
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***77 | Adapter | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
156-9755 Manifold Gp-Fuel -Rh
| 10***37 | Grommet | 16 |
| 14***45 | Washer-Retaining | 8 |
| 15***48 | Clamp | 8 |
156-9756 Manifold Gp-Fuel -Lh
| 10***37 | Grommet | 16 |
| 14***45 | Washer-Retaining | 8 |
| 15***48 | Clamp | 8 |
207-4512 Pump As-Fuel Transfer
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 5 |
| 20***12 | Pump As-Fuel Transfer | 1 |
256-3663 Pump Gp-Fuel Injection
| 23***57 | Injector Group-Fuel | 1 |
| 23***82 | Plug | 1 |
| 24***07 | Seal-O-Ring | 1 |
7n-8599 Pump Gp-Fuel Priming
| 06***39 | Seal-O-Ring | 1 |
| 16***06 | Pump As-Fuel Priming | 1 |
| 22***18 | Valve As; (Fuel Priming Pump) | 2 |
115-1065 Pump Gp-Fuel Priming -Lh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
313-7770 Pump Gp-Fuel Transfer
| 25***91 | Kit-Seal | 1 |
| 25***92 | Kit-Repair; (Gear, Shaft) | 1 |
| 31***70 | Pump Group-Fuel Transfer; -1-Section Gear | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
| 31***70 | Pump Group-Fuel Transfer; -1-Section Gear | 1 |
303-5175 Tank As-Fuel
| 10***68 | Film-Warning; (Transport Restriction) | 1 |
| 14***20 | Channel; (244-cm) | 0 |
| 14***19 | Pipe-Bulk; (288-cm) | 0 |
303-5176 Tank Gp-Fuel
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***89 | Spacer; (15.9x50.8x6.3-mm Thk) | 3 |
Generators
235-2277 Adapter -Lower
| 23***77 | Adapter; -Lower | 1 |
235-2276 Adapter -Upper
| 23***76 | Adapter; -Upper | 1 |
121-5423 Air Filter Gp-Generator
| 12***23 | Air Filter Group-Generator | 1 |
| 12***10 | Frame As-Filter | 1 |
| 12***12 | Filter Element-Air; (Generator) | 1 |
152-5179 Bracket Gp-Mounting -Opposite Drive End
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 12***74 | Seal | 1 |
| 13***54 | Bar-Support | 1 |
236-2490 Cable Gp-Generator Ground -Neutral
| 23***54 | Cable; (Grounding) | 1 |
| 23***90 | Cable Group-Generator Ground; -Neutral | 1 |
278-7878 Connection Gp-Generator Leads -Extension Box, Rh
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
121-9480 Connection Gp-Terminal Strip
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 12***80 | Connection Group-Terminal Strip | 1 |
| 18***11 | Cable; (0000-Ga, Dark Green)(97-cm) | 0 |
122-0330 Connection Gp-Terminal Strip
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 12***95 | Cable As-Extension | 15 |
| 12***30 | Connection Group-Terminal Strip | 1 |
154-1902 Connection Gp-Terminal Strip
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 34 |
349-5019 Connection Gp-Terminal Strip -Extension Box, Rh
| 24***09 | Dispenser Group-Marker Tape; (T0, T1, T2, T3) | 1 |
| 25***66 | Tape-Identification; (T1)(125-cm) | 0 |
| 25***67 | Tape-Identification; (T2)(125-cm) | 0 |
154-1901 Connection Gp-Terminal Strip
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 36 |
121-5132 Connection Gp-Terminal Strip
| 12***32 | Connection Group-Terminal Strip | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 12 |
| 5N***85 | Tape-Electrical; (Varnished Cambric) | 1 |
122-0328 Connection Gp-Terminal Strip
| 03***95 | Terminal-Ring; (0000-Ga, 3/8-In Screw) | 2 |
| 12***95 | Cable As-Extension | 9 |
| 12***28 | Connection Group-Terminal Strip | 1 |
115-3056 Connection Gp-Terminal Strip
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 34 |
116-9827 Connection Gp-Terminal Strip
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 34 |
118-9430 Connection Gp-Terminal Strip
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 16 |
| 11***32 | Strip-Terminal | 3 |
122-3487 Conversion Gp-Generator
| 11***12 | Box Group-Extension Terminal; (Low Voltage) | 1 |
| 12***94 | Box & Mounting Group; -Cable Access | 1 |
| 12***87 | Conversion Group-Generator | 1 |
361-2453 Conversion Gp-Generator -Extension Box
| 36***53 | Conversion Group-Generator; -Extension Box | 1 |
| 36***95 | Box Group-Extension Terminal | 1 |
130-8306 Cover-Drip
| 13***06 | Cover-Drip | 1 |
128-0595 Cover-Drip
| 12***95 | Cover-Drip | 1 |
142-4453 Exciter Gp -Permanent Magnet
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 10***49 | Rotor As-Magnetic | 1 |
| 11***17 | Ring; (Support) | 1 |
215-2402 Exciter Gp -Power
| 20***24 | Rotor-Exciter | 1 |
| 21***02 | Exciter Group; -Power | 1 |
| 21***04 | Stator-Exciter | 1 |
142-4457 Exciter Gp -Power
| 12***26 | Stator-Exciter | 1 |
| 14***57 | Exciter Group; -Power | 1 |
| 1F***42 | Bolt Cover To Shut-Off Housing | 4 |
284-3062 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 17***19 | Kit-Parts; -Generator | 1 |
144-2000 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 14***99 | Generator Group | 1 |
144-2088 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 14***87 | Generator Group | 1 |
4p-4597 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 1W***48 | Plate-Serial Number On Upper R.H.Side Of | 1 |
280-3848 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 17***19 | Kit-Parts; -Generator | 1 |
147-9498 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 14***97 | Generator Group | 1 |
144-1952 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 14***51 | Generator Group | 1 |
264-5022 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 1W***48 | Plate-Serial Number On Upper R.H.Side Of | 1 |
144-1824 Generator Ar
| 10***61 | Plate-Generator; (Grease Bearing) | 1 |
| 11***52 | Film; (Information)(Generator) | 1 |
| 14***23 | Generator Group | 1 |
144-1951 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***51 | Generator Group | 1 |
144-1999 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***99 | Generator Group | 1 |
279-6661 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***01 | Screen Group-Air | 1 |
144-1823 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***23 | Generator Group | 1 |
4p-4596 Generator Gp
| 10***11 | Cartridge-Grease | 1 |
| 11***39 | Stator Group-Main | 1 |
| 12***38 | Connection Group-Electrical; -Basic | 1 |
147-9497 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***01 | Screen Group-Air | 1 |
276-4650 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***01 | Screen Group-Air | 1 |
144-2087 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***87 | Generator Group | 1 |
284-3061 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***53 | Exciter Group; -Permanent Magnet | 1 |
| 14***01 | Screen Group-Air | 1 |
322-3173 Heater Gp-Space -Generator
| 28***45 | Heater As-Space; (600-Watt) | 2 |
| 32***73 | Heater Group-Space; -Generator | 1 |
| 33***63 | Harness As-Wiring; (Space Heater) | 1 |
256-9606 Installation Ar-Generator -Generator
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
| 25***06 | Installation Ar-Generator; -Generator | 1 |
| 26***17 | Setscrew; (M24x2-Thd) | 4 |
243-4270 Mounting Gp-Voltage Regulator
| 24***70 | Mounting Group-Voltage Regulator | 1 |
| 4L***25 | Lockwasher | 4 |
| 7X***01 | Bolt-Plt; (1/4unc X 1 1/4) | 4 |
242-3487 Mounting Gp-Voltage Regulator
| 03***75 | Washer; (0.266x1.25x0.06-In Thk) | 6 |
| 24***87 | Mounting Group-Voltage Regulator | 1 |
| 24***64 | Spacer; (8.5x12.7x94.3-mm Thk) | 3 |
123-8591 Mounting Gp-Voltage Regulator
| 12***91 | Mounting Group-Voltage Regulator | 1 |
| 24***26 | Washer-Hard; (7.2x32x1-mm Thk) | 6 |
| 4B***74 | Washer; (6.4x14.5x1.6-mm Thk) | 1 |
5n-0593 Plate Gp-Generator Coupling
| 5N***93 | Plate Group-Generator Coupling | 1 |
| 5N***78 | Plate As | 1 |
| 5N***79 | Shim .80mm(.031in)Thk | 3 |
298-3817 Rectifier Gp-Revolving
| 11***72 | Harness As-Wiring; (Rectifier) | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 4 |
| 29***48 | Heat Sink As | 1 |
314-7755 Regulator As-Voltage -Digital
| 24***58 | Film-Warning; (Shock, Electrocution Hazard)(Shock, Electrocution Hazard) | 1 |
| 31***55 | Regulator As-Voltage; -Generator | 1 |
309-1019 Regulator As-Voltage -Digital
| 21***84 | Film-Warning; (Shock, Electrocution Hazard)(Voltage Regulator) | 1 |
| 30***19 | Regulator As-Voltage; -Digital | 1 |
| 4B***74 | Washer; (6.4x14.5x1.6-mm Thk) | 8 |
121-6202 Regulator Gp-Voltage -Digital
| 12***02 | Regulator Group-Voltage; -Digital | 1 |
| 24***87 | Mounting Group-Voltage Regulator | 1 |
| 31***55 | Regulator As-Voltage; -Generator | 1 |
121-6200 Regulator Gp-Voltage
| 12***00 | Regulator Group-Voltage | 1 |
| 12***91 | Mounting Group-Voltage Regulator | 1 |
| 21***48 | Film-Instruction; (Voltage Control Adjustment) | 1 |
208-0392 Rotor Gp-Generator
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
| 13***01 | Kit-Rotor Lead | 1 |
| 13***40 | Hub-Flexible Coupling | 1 |
208-0391 Rotor Gp-Generator
| 13***01 | Kit-Rotor Lead | 1 |
| 15***32 | Ball Bearing | 1 |
| 20***91 | Rotor Group-Generator | 1 |
169-7044 Rotor Gp-Generator
| 13***01 | Kit-Rotor Lead | 1 |
| 15***32 | Ball Bearing | 1 |
| 16***44 | Rotor Group-Generator | 1 |
145-6001 Screen Gp-Air
| 12***59 | Screen As-Air | 2 |
| 14***01 | Screen Group-Air | 1 |
| 3E***23 | Bolt-Flange Head; (1/4-20x1-In) | 4 |
148-2670 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
| 12***56 | Bar; (Heater Mounting) | 4 |
145-7642 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
| 12***56 | Bar; (Heater Mounting) | 4 |
118-1239 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 11***39 | Stator Group-Main | 1 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
145-7655 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
| 12***56 | Bar; (Heater Mounting) | 4 |
145-7645 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
| 12***56 | Bar; (Heater Mounting) | 4 |
145-7647 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
| 12***56 | Bar; (Heater Mounting) | 4 |
145-7638 Stator Gp-Main
| 03***43 | Screw; (1/4-20x0.625-In) | 26 |
| 12***88 | Heater As-Space; (600-Watt) | 2 |
| 12***56 | Bar; (Heater Mounting) | 4 |
Lubrication System
124-5513 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 4 |
| 10***99 | Cover As | 4 |
| 12***13 | Breather Group; -Crankcase | 1 |
7n-1875 Filler Gp-Engine Oil -Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 2W***52 | Gasket | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
115-7841 Filter Gp-Engine Oil -Lh
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 6 |
112-4921 Filter Gp-Engine Oil -Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
140-2665 Fumes Disposal Gp
| 14***65 | Fumes Disposal Group | 1 |
| 15***96 | Tube As | 2 |
| 3P***47 | Clamp | 2 |
7c-6366 Gauge Gp-Oil Level (Dipstick)
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 4B***40 | Cover; (Prelubrication) | 1 |
| 4P***84 | Gauge As-Oil Level (Dipstick) | 1 |
115-7860 Lines Gp-Engine Oil -Cooler
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
111-3424 Lines Gp-Turbocharger Oil
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 20 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
244-1535 Pump & Lines Gp-Prelubrication
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
106-9873 Pump Gp-Engine Oil -2-Section Gear
| 10***72 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 10***73 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 1B***73 | Bolt 8.50 In.(215.90 mm) Long | 3 |
106-9872 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 10***67 | Shaft As-Idler; (12-Teeth) | 2 |
3t-3735 Pump Gp-Prelubrication
| 00***94 | Key | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 9 |
5n-4659 Regulator Gp-Oil Level
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
102-6845 Tank Gp-Engine Oil
| 04***01 | Coupling-Pipe | 1 |
| 10***45 | Tank Group-Engine Oil | 1 |
| 11***34 | Tank As; (Oil) | 1 |
147-3738 Valve Gp-Fluid Sampling -Oil
| 14***38 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 7X***87 | Valve As-Fluid Sampling; (Oil Cooler) | 1 |
| 8C***45 | Cap-Dust; (Engine Oil Quick Disconnect) | 1 |
Operator Station
353-5944 Alarm Gp
| 10***47 | Screw; (1/4x14x1-In) | 4 |
| 20***39 | Cap | 1 |
| 26***52 | Nut; (1/2-14 Npsm-Thd) | 2 |
178-9030 Box As-Storage
| 17***30 | Box As-Storage | 1 |
| 4S***64 | Rivet; (On Front L.H. Of Seat Support) | 4 |
| 5P***37 | Seal 1.667 M(65.25 In.) | 0 |
245-0000 Box Gp-Control Panel
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 12 |
| 24***28 | Frame As | 1 |
| 24***31 | Brace As | 1 |
210-5558 Box Gp-Storage
| 11***89 | Spacer; (15.9x50.8x6.3-mm Thk) | 4 |
| 15***86 | Insert-Nut | 4 |
| 17***30 | Box As-Storage | 1 |
237-0125 Control Gp-Engine Monitoring -Resistive Temperature Device
| 23***45 | Control Group-Engine Monitoring; (Resistive Temperature Device) | 1 |
| 23***25 | Control Group-Engine Monitoring; -Resistive Temperature Device | 1 |
300-7647 Control Gp-Generator Set -Emcp 3.3
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 26***57 | Film-Certification; (Emcp 3) | 1 |
274-8518 Control Gp-Generator Set -Emcp 3.3
| 27***18 | Control Group-Generator Set; -Emcp 3.3 | 1 |
| 30***47 | Control Group-Generator Set; -Emcp 3.3 | 1 |
274-8521 Control Gp-Generator Set -Digital Voltage Regulator
| 24***58 | Film-Warning; (Shock, Electrocution Hazard)(Shock, Electrocution Hazard) | 1 |
| 27***21 | Control Group-Generator Set; -Digital Voltage Regulator | 1 |
| 31***55 | Regulator As-Voltage; -Generator | 1 |
245-0082 Control Gp-Generator Set -Voltage Regulator
| 24***82 | Control Group-Generator Set; -Voltage Regulator | 1 |
| 27***21 | Control Group-Generator Set; -Digital Voltage Regulator | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 4 |
245-0001 Cover Gp-Control Panel -Rear
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 8 |
| 24***33 | Brace As | 1 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
322-7622 Cover Gp-Control Panel -Fuel
| 17***81 | Nut; (1/4-20-Thd) | 4 |
| 24***13 | Gasket; (Control Panel) | 1 |
| 32***21 | Panel As | 1 |
245-0023 Cover Gp-Control Panel -Front
| 23***51 | Bolt-Flange Head; (M6x1x16-mm) | 10 |
| 24***88 | Plate-Cover | 1 |
| 24***31 | Seal; (13.25-Dm Each) | 0 |
252-7556 Cover Gp-Control Panel -Annunciator
| 17***81 | Nut; (1/4-20-Thd) | 4 |
| 18***58 | Panel As | 1 |
| 24***13 | Gasket; (Control Panel) | 1 |
121-5421 Filter As-Electronic -Radio Frequency Interference
| 12***21 | Filter As-Electronic; -Radio Frequency Interference | 1 |
145-7571 Filter Gp-Electronic -Radio Frequency Interference
| 12***21 | Filter As-Electronic; -Radio Frequency Interference | 1 |
| 14***70 | Bar; (Grounding) | 2 |
| 14***71 | Filter Group-Electronic; -Radio Frequency Interference | 1 |
102-6818 Fire Extinguisher Gp
| 10***18 | Fire Extinguisher Group | 1 |
| 14***90 | Screw-Wood | 3 |
| 15***78 | Bracket As | 1 |
275-2085 Gauge Gp-Fuel Level
| 27***85 | Gauge Group-Fuel Level | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 1 |
| 6V***07 | Seal-Rectangular | 1 |
236-1159 Module Gp-Alarm
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 4 |
| 23***58 | Module Group-Alarm | 1 |
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
252-7553 Module Gp-Alarm
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
| 24***27 | Nut As; (M6x1-Thd) | 4 |
| 24***13 | Gasket; (Control Panel) | 1 |
245-0087 Mounting Gp-Control Panel
| 08***97 | Washer; (13x50x6-mm Thk) | 4 |
| 24***87 | Mounting Group-Control Panel; -Isolator | 1 |
| 24***08 | Mount-Isolation | 4 |
104-4704 Mounting Gp-Control Panel -Emcp Ii
| 10***04 | Mounting Group-Control Panel; -Emcp Ii | 1 |
| 1B***76 | Pin,Straight,Headed Governor And Decelerator Control | 1 |
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 2 |
262-5314 Padlock Gp
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 5 |
| 26***14 | Padlock Group | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
245-0030 Panel Gp-Control -Emcp 3.3 Eui
| 10***72 | Seal; (Control) | 1 |
| 15***75 | Ladder Clip | 3 |
| 23***73 | Grommet-Blind | 4 |
Prime Package
9y-1392 Jack Gp-Height Adjuster
| 9Y***92 | Jack Group-Height Adjuster | 1 |
224-1196 Ladder Gp
| 22***96 | Ladder Group | 1 |
| 22***97 | Ladder As | 1 |
| 22***99 | Handrail As | 1 |
202-0836 Panel Gp-Rear
| 14***09 | Bolt; (Self-Tapping) | 5 |
| 20***32 | Angle | 1 |
| 20***33 | Angle | 1 |
Service Equipment And Supplies
7e-4300 Chart-Instrument Panel
| 7E***00 | Chart-Instrument Panel | 1 |
6l-4502 Chart-Plate & Film
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 15***55 | Film-Certification | 1 |
| 22***26 | Film-Warning; (Hot Surface) | 4 |
224-6549 Film Gp -Power Module
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***08 | Film-Caution; (High Trailer) | 3 |
| 10***69 | Film-Information | 2 |
264-5354 Film Gp
| 20***60 | Film Group; -Product Identification | 1 |
| 23***86 | Plate-Identification; (Machine)(17-Pin) | 1 |
| 26***54 | Film Group | 1 |
121-9272 Kit-Marine Generator Parts
| 12***72 | Kit-Marine Generator Parts | 1 |
171-6719 Kit-Parts -Generator
| 17***19 | Kit-Parts; -Generator | 1 |
137-8533 Shim Pack
| 13***33 | Shim Pack; (Includes 13-Shims) | 1 |
| 13***34 | Shim; (0.025-mm Thk) | 1 |
| 13***35 | Shim; (0.0508-mm Thk) | 1 |
PM3516 serial number reference
The PIN/serial plate on a PM3516 power module is riveted to the skid base frame or control-panel end of the enclosure, near the engine data plate and module builder's plate; on containerized units check just inside the access door near the switchgear. Read the first three characters as the serial prefix (letters or digit-plus-letters, e.g. NBR, BPD, CAC, 1LZ), which identifies the specific power-module build and, in some cases, the engine fitted; the digits that follow (e.g. 00001-UP) mark the production sequence within that prefix. Parts and service literature is broken out by these prefix-and-sequence ranges rather than by calendar year.
| Prefix | Identifies | Notes |
|---|---|---|
| BPD | PM3516 power module | Confirmed serial prefix for the PM3516 diesel power module (skid-mounted V16 generator set), tied in parts literature to module-level cooling components (radiator group). Sources do not spell out mechanical 3516 vs electronic 3516B engine for this prefix specifically -- confirm the fitted engine variant against the unit's own plate/parts book. |
| CAC | PM3516 power module | Confirmed serial prefix for the PM3516 power module, tied to starting-motor and other module components in parts literature. As with BPD, engine variant (mechanical 3516 vs electronic 3516B) is not documented for this prefix specifically -- confirm against the unit's plate/parts book. |
| NBR | PM3516 power module (3516B engine) | Confirmed prefix, tied in parts documentation to the PM3516 power module built around the 3516B engine (V16, electronically governed, turbocharged, higher injection pressure than the base mechanical 3516). Radiator and coolant-temperature-sensor listings both cite this range against the 3516B-engined module. This is a distinct code from PM3512's similarly-spelled BNR prefix -- do not conflate the two. |
| 1LZ | PM3516 power module | Tied in parts documentation to a water-pump group on the PM3516 power module, with the cited range starting partway through production rather than at the first unit, consistent with a running parts change rather than a distinct sub-model. Not corroborated by a general serial-prefix reference chart, and this same three-character code has been associated elsewhere with an unrelated older Cat engine line, which is normal given Cat's prefix codes get reused across product families over time -- confirm the PM3516 tie against the actual unit's parts book before ordering by this range alone. |
Frequently asked questions
What engine does the Caterpillar PM3516 use?
The PM3516 is built around Caterpillar's 3516 diesel, a turbocharged 16-cylinder, 69-liter V-engine. Early production power modules used mechanical unit injection; later builds carry the electronically governed 3516B engine, confirmed for at least one serial-prefix range by parts documentation. Confirm which generation is fitted against the specific unit's data plate rather than assuming by build year alone.
What is the operating weight of a PM3516 power module?
No single weight figure is published for the assembled PM3516 package. It varies by configuration - enclosure type, radiator size, fuel tank capacity, and generator-end frame all change the total, and Cat engineered these modules to order rather than to one fixed spec sheet. Confirm the actual weight against the nameplate or shipping documents for the specific unit before quoting rigging or transport figures.
What replaced the Caterpillar PM3516?
There is no single named successor model. The mechanical 3516 platform inside early PM3516 modules gave way to the 3516B and later 3516C engines, and Cat's later rental-grade power modules on those blocks were rebranded under its XQ product line rather than continuing the PM naming convention. Treat any specific successor claim as a lineage description, not a like-for-like replacement.
What PM3516 owners discuss
What engine powers the Cat PM3516 power module, and how is it packaged?
The PM3516 is built around Caterpillar's 3516 V-16 diesel platform, roughly 69 L displacement, packaged as an integrated heavy-duty power module rather than sold as a standalone genset. It turns up on mine sites and other remote or rugged installations, often deployed as several modules working together to feed one site's load. Output, voltage, and emissions certification vary by series (3516, 3516B, 3516C, 3516E all share this family), so treat any kW figure as configuration-dependent unless tied to your unit's own nameplate.
What is the biggest recurring complaint about this engine family that owners should watch for?
Intake valve wear and dropped valves come up again and again in field discussion. Some report valve recession bad enough to need lash adjustments well ahead of the factory interval, occasionally on heads that were recently replaced. Suspected contributors mentioned by mechanics include aftercooler condensation reaching the valves, plus the industry-wide drop in fuel sulfur that removed a natural lubricating effect on the valve train. Track valve lash trends at every service interval rather than writing off a shortening trend as normal wear. Have your dealer verify any accelerating recession pattern before it drops a valve.
How many hours can a 3516-based power module run before a major overhaul?
With proper maintenance the platform is commonly cited as reaching 20,000-plus hours before a major overhaul, and used units on the market range from a few hundred hours on a near-new module up to well over 9,000-10,000 hours. Actual life depends heavily on duty cycle (continuous mine or drilling power versus standby), load factor, and how well cooling and fuel/oil quality were managed. Don't assume a high-hour unit is worn out or a low-hour unit is trouble-free without checking the maintenance record.
What electrical or sensor faults are commonly reported on the control panel for this engine family?
Reported faults commonly trace back to the engine speed/timing sensor circuit and the throttle position sensor, with fault codes triggered once signal voltage drifts outside the expected range. Technicians report that many of these sensor-fault codes turn out to be connector corrosion or a damaged wiring harness terminal rather than a bad sensor; swapping worn stamped terminals for machined ones is cited as clearing intermittent faults that looked like sensor failures. Check wiring and connectors first before condemning a sensor. Have your dealer verify any persistent shutdown code before returning the module to service.
What turbo or aftercooler behavior do operators flag on these engines?
Condensation forming in the aftercooler and intake air path is called out as a contributor to the intake valve erosion noted above. General experience with turbocharged diesels of this size also flags a faint cold-start ticking noise or a drop in boost as an early sign of an exhaust manifold or turbo-flange leak, well before it becomes an obvious failure. On a module that sits idle between duty cycles, condensation risk runs higher, so cold-start behavior and boost readings are worth logging. Have your dealer verify any manifold leak or boost anomaly rather than running it down.
What cooling-system behavior is typical for a heavy continuous-duty module like this?
These engines reject a very large amount of heat to jacket water at full load, so radiator capacity and coolant additive concentration matter more here than on a light-duty standby set. Over-concentrated coolant additive is flagged as a cause of accelerated water pump seal wear, so coolant chemistry needs checking on a schedule rather than just topping off the level. On a rental or mining module that cycles in and out of storage, corrosion and pump seal condition are common early failure points reported by field techs.
What should a buyer check before purchasing a used PM3516 or similar 3516-based power module?
Confirm the exact nameplate rating, voltage, frequency, and emissions certification for the series involved, since 3516, 3516B, 3516C, and 3516E all share the family name but differ in specs. Pull the full maintenance and fault-code history, and ask for a load bank test across the operating range for at least a couple of hours, since that's what actually exposes cooling, fuel-delivery, and alternator problems that don't show up at idle. Have oil and coolant samples analyzed for acid number, water content, and wear metals, and check the aftercooler/turbo and valve-train service records specifically given how often those show up in field complaints. Have your dealer verify hour-meter accuracy and any pending fault codes before final purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PM3516 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.