Caterpillarcold planer(no series)
Caterpillar PM-565
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar PM-565 is a large, fully tracked cold planer in the roughly 2.1-2.2 m (7 ft) cutting-width class, built for full-depth asphalt and concrete milling on highway and airport paving jobs. Production began in 1992 at Caterpillar's Minerbio, Italy plant (the former Bitelli works), and the PM-565 was Caterpillar's first cold planer under its own badge. The base PM-565 (serial prefix 3TK) runs a mechanical, non-HEUI Cat 3408 V8 with no ECM or fault-code diagnostics. The later PM-565B (serial prefix 8GS) moved to a turbocharged Cat 3408-family V8 from 18.0 L displacement -- some units in this range carry the mechanical 3408C, others the HEUI-equipped 3408E/3408ETA rated near 466 kW (625 hp) at 2100 rpm, so confirm the exact engine against the unit’s own tag. Operating weight runs roughly 83,800-85,100 lb (38,000-38,600 kg) depending on configuration, split across front and rear track pairs, with a four-track crab-steer undercarriage, an elevating operator's column, a rear discharge conveyor, and an integrated water spray system for dust control and drum cooling. Cutting depth capacity runs to roughly 300 mm (12 in), and the machine was offered with different bit/tool-holder packages for asphalt versus concrete work.
The main change across the line is the engine and fuel system: the base PM-565's mechanical 3408 gave way to the PM-565B's electronically metered, turbocharged 3408E/3408ETA, trading injection-pump simplicity for higher sustained power and (on the B-series) HEUI-based diagnostics. No confirmed direct successor model has turned up in factory literature for either the PM-565 or PM-565B; Caterpillar's later half-lane cold planers (including the C18-powered PM620/PM622 generation) represent a newer, separate engine and chassis platform rather than a documented replacement line. That gap matters in the field today: PM-565 and PM-565B units from the 1990s-2000s are still working in paving fleets, and independent shops often prefer the base PM-565's mechanical 3408 for its simplicity and lack of electronic fault dependence, while PM-565B units draw on the broader 3408E parts base shared with industrial and generator applications. Because these are high-hour, heavy-wear machines, most parts demand centers on the cutting drum, tool holders, track undercarriage, conveyor, and water spray system rather than the engine itself, keeping both series relevant in the used and parts markets.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar PM-565 specifications
Engine
| Engine model (PM-565B) | Cat 3408C or 3408E/3408ETA HEUI, 8-cylinder diesel (turbocharged-aftercooled V8); engine fitment varies by configuration/production point within the PM-565B serial range -- confirm against the machine’s own engine tag |
| Gross power (PM-565B) | 466 kW (625 hp) at 2100 rpm, per the HEUI-equipped configuration -- output for 3408C-equipped units within the same serial range is not separately documented |
| Displacement | 18.0 L (1,098.5 cu in) |
| Cylinders | 8, V-configuration |
| Emissions tier | Not documented for this model; PM-565B predates U.S. EPA nonroad Tier regulation and no tier rating is published |
| Base PM-565 (pre-B, 3TK-prefix) engine | Cat 3408 (mechanical, non-HEUI); independent power/displacement figures for this earlier variant are not published separately from the 3408E figures above — do not assume identical output |
Weights
| Operating weight, full water tank (PM-565B) | 38,600 kg (85,100 lb); front track load 20,455 kg (45,100 lb), rear track load 18,140 kg (40,000 lb) |
| Operating weight, alternate published figure | 38,000 kg (83,776 lb) — some spec databases list a slightly lower full-load weight; treat as approximate, varies by source/configuration (water tank fill, tool count) |
| Ground pressure | Not documented in available sources |
Dimensions
| Overall length | 14.5 m (47.6 ft); some sources cite up to 15.1 m (49 ft 5 in) with conveyor raised |
| Shipping/transport width | 3.17 m (10.4 ft) |
| Maximum operating height | 4.85 m (15.9 ft) |
| Minimum height (conveyor down) | 3.22 m (10 ft 7 in), per transport-dimension listings |
| Track (undercarriage) length, each track unit | 2.07 m (6.8 ft) |
| Track width, each track unit | 35 cm (13.8 in) |
| Discharge conveyor width | 76 cm (30 in); conveyor swings roughly 45 degrees left or right |
Performance
| Travel speed | 6.1 km/h (3.8 mph) |
| Milling (operating) speed | 40 m/min (131 ft/min) |
| Cutting width | 2.10 m (6.9 ft) |
| Cutting depth, maximum | 30.7 cm (12.1 in); at least one secondary listing cites up to 13.8 in (35 cm) — treat the deeper figure as unconfirmed for this exact model |
| Milling accuracy | Consistent accuracy to within about 3 mm (1/8 in), per Cat paving-line literature for this cold-planer class |
| Gradeability | Not documented in available sources |
Service capacities (summary)
| Fuel tank | 946 L (250 gal) |
| Water spray system | 3,790 L (1,001 gal) |
| Hydraulic system | Not documented in available sources |
| Engine oil | Not documented in available sources |
| Cooling system | Not documented in available sources; machine uses a separate radiator and hydraulic oil cooler, plus a dedicated rotor-clutch oil sump/cooler circuit |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PM-565 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3408 mechanical diesel V8 | Not published in any accessible source for this exact serial range (3TK-prefix). Cat 3408-family crankcases on comparable off-highway installations typically run 38-45 L (10-12 US gal) including filter, but this figure is not confirmed against the PM-565's own refill chart - verify against the machine's OMM or dealer before servicing. | Cat DEO (Diesel Engine Oil), SAE grade selected from the OMM cold-weather/ambient-temperature chart (typically SAE 15W-40 in temperate climates, lighter grades such as SAE 10W or 0W-20/30 synthetic blends in cold climates). API CF-4/CG-4 or later performance level for mechanical (non-HEUI) 3408 engines of this era. |
| Cooling system | Not confirmed for this specific model in available documentation. Cat 3408-family cooling systems of similar vintage and installation size commonly fall in the 110-115 L (29-30 US gal) range, but this varies by radiator and shroud configuration - treat as an estimate only, not a substitute for the OMM figure. | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant) premix, per the machine's climate-based dilution guidance in the OMM. Standard Cat practice calls for a 1:1 water/glycol premix unless the OMM specifies otherwise for extreme cold. |
| Fuel tank | Not independently confirmed for the base PM-565 (3TK-prefix, mechanical 3408). A later variant of this chassis family lists roughly 946 L (250 US gal), but that figure cannot be confirmed as applying to the original PM-565 without seeing its own OMM table - treat as approximate and varies by configuration/series. | Diesel fuel meeting the sulfur/cetane specification current for the machine's build era per the OMM fuel-specifications section; use a winter-blend or fuel conditioner in cold climates per the OMM's cold-weather recommendations. |
| Hydraulic system (tank and circuit combined) | Not reliably documented. One secondary source suggested a figure near 132 L (35 US gal), but this could not be cross-verified against a second independent source and is treated as unconfirmed - varies by configuration/series, verify with the OMM or dealer. | Cat HYDO Advanced (or Cat TDTO where the OMM specifies a shared hydraulic/power-train fluid) in the viscosity grade matched to ambient temperature per the OMM climate chart - typically a multigrade such as TDTO 10W-30 in moderate climates, lighter grades in cold climates. |
| Power train / drive-train compartments (track drive, conveyor, and cutter-drum drive gearboxes) | Not published for this model in available documentation; per-compartment capacities are not confirmed - verify against the machine's OMM refill chart before servicing. | Cat TDTO (Transmission/Drive Train Oil), viscosity grade selected from the OMM's ambient-temperature chart. |
| Grease (all lubrication fittings) - specification only | Not applicable (grease-gun service, no reservoir capacity). | Cat Multipurpose Grease (Cat MPGM), NLGI grade selected by season/climate per the OMM - typically NLGI 2 for normal ambient conditions, dropping to NLGI 1 or 0 in sustained cold-weather operation. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar PM-565 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PM-565 beyond the schedule
Predictive Maintenance & Fluid Analysis
Track engine oil and coolant sample trends on both the mechanical 3408 and the HEUI 3408E/3408ETA to catch bearing or liner wear early. On 3408E-powered PM-565B units, watch HEUI pump pressure and injector response for drift before hard starting shows up. Monitor track roller and idler wear against baseline measurements, and check water spray tank and line condition regularly since scale buildup restricts drum cooling and dust suppression before it becomes visible.
Corrective & Common Repairs
Expect frequent cutting drum tool holder and bit replacement from milling wear, plus periodic drum housing wear-plate repair. Track pads, rollers, and idlers wear steadily under the four-track undercarriage and need regular replacement. Hydraulic hoses at the elevating column flex point are a common failure spot from repeated column travel. Discharge conveyor belts, scrapers, and rollers wear from abrasive millings and need routine adjustment or replacement to keep material flow clean.
Overhaul & Rebuild Points
Major rebuild points center on the cutting drum gearbox and drum drive coupling, the final drives and track undercarriage, and the elevating column bushings and wear plates. On base PM-565 units, plan for mechanical 3408 top-end overhaul at high hours; on PM-565B units, plan for turbocharger overhaul, plus HEUI pump and injector rebuild on units fitted with the HEUI 3408E/3408ETA engine. Inspect the main frame around the drum housing and column mounts for fatigue cracking at major rebuild intervals.
Seasonal & Environment Servicing
Drain and winterize the water spray tank, pump, and lines before freezing weather to prevent cracked housings and burst lines. In wet or muddy conditions, increase track undercarriage lubrication and rinse frequency to limit packed debris and premature roller wear. In hot, dusty milling environments, clean the radiator core and check the fuel-water separator more often. Verify coolant concentration seasonally to hold proper freeze and boil protection for the V8 diesel.
PM-565 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0749 | Filter-Fuel | Fuel system service | Check fitment → |
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 126-5802 | Filter As-Compressed Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 077-6325 | Kit-Seal | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PM-565 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| No CID/FMI code (mechanical 3408, base PM-565, prefix 3TK) | Base PM-565 runs a mechanical, non-HEUI Cat 3408 V8 with no engine ECM, so there is no CID/FMI fault code display on this configuration. | Not applicable - fuel system and governor are mechanical; only analog gauges and simple warning lamps/buzzer monitor oil pressure and coolant temperature. | Diagnose from gauge readings and mechanical inspection (oil pressure switch, coolant temp switch, warning-lamp wiring) rather than pulling codes. |
| 164-03 | Injection actuation (HEUI) pressure sensor signal voltage above normal range. | Open circuit or short to a higher voltage source in the injection actuation pressure sensor wiring, or a failed sensor, on PM-565B units fitted with the 3408E/3408ETA HEUI fuel system -- does not apply to 3408C-equipped units on the same serial range. | Check sensor connector and wiring for damage or corrosion, verify sensor supply voltage, replace the sensor if wiring tests good, and confirm HEUI pump output pressure with a mechanical gauge. |
| 164-04 | Injection actuation (HEUI) pressure sensor signal voltage below normal range. | Short to ground in the sensor circuit or a failed sensor. | Inspect the harness for chafing or grounding near the engine, test sensor resistance against spec, and replace the sensor if faulty. |
| 100-03/04 | Engine oil pressure sensor circuit voltage above or below normal. | Faulty oil pressure sensor, damaged wiring, or connector corrosion; can mask a genuine low oil pressure condition. | Verify actual oil pressure with a mechanical gauge before condemning the sensor, check wiring and connectors, and replace the sensor as needed. |
| 110-03/04 | Engine coolant temperature sensor circuit voltage above or below normal. | Sensor failure, wiring fault, or connector corrosion; milling dust and vibration on a cold planer accelerate harness wear near the engine. | Inspect harness routing and connectors for dust intrusion or chafing, test the sensor against known resistance values, and replace if out of spec. |
| 190-08 | Engine speed/timing sensor abnormal update rate or signal loss. | Sensor air gap out of spec, a damaged sensor, or a wiring/connector fault; can cause hard starting, stalling, or erratic rpm. | Check sensor air gap and mounting, inspect wiring for damage, clean and reseat connectors, and replace the sensor if the signal stays erratic. |
| 102-03/04 | Boost pressure sensor circuit voltage above or below normal. | Sensor or wiring fault, or a blocked/kinked sense line, sometimes packed with milling dust on a cold planer. | Inspect and clear the boost sense line, check sensor wiring, and replace the sensor if the line and wiring test good. |
| 168-02 | Battery voltage / ECM power supply erratic or intermittent. | Corroded battery terminals, loose ground straps, a worn charging system, or a marginal ECM power/ground connection, common on older machines exposed to dust and vibration. | Clean and tighten battery and ground connections, load-test the batteries and alternator, and check ECM power/ground circuit resistance. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PM-565 attachments & work tools
Rotor cutting-tool and holder system
The cutting drum runs carbide-tipped conical bits set in a chevron pattern, seated in base-block-mounted quick-change holders. The holder design lets a bit rotate in its pocket for even carbide wear and is built to break away from impact rather than damage the welded base block, so a hit tool holder can be swapped without rewelding the block.
Cutting width / rotor configuration
Factory literature for this class lists a cutting width around 2.1-2.2 m (6.9-7.2 ft / roughly 83-87 in), with a maximum cut depth near 300-310 mm (12-12.1 in); figures vary slightly by source and measurement point, so treat as a range rather than a fixed number. Only the single full-width rotor is documented for this model; no narrower or split-rotor factory option is confirmed.
Water spray / dust-suppression system
An onboard water tank, roughly 3,790 L (1,000 gal) capacity on the B-series, feeds spray nozzles inside the cutting chamber that cool the bits and holders and knock down dust during milling. This is standard equipment for the size class, not a bolt-on option.
Primary discharge conveyor
A single hydraulically swinging discharge conveyor loads milled material directly into trucks, with reported swing of about 45 degrees to either side and material width narrowing from roughly 1,020 mm (40 in) at the collecting end to about 915 mm (36 in) at discharge. The conveyor folds down for transport and service; no separate loading/pickup conveyor is documented for this model.
Cutting-chamber guarding (moldboard, side plates, skid shoes)
Moldboard and side-plate wear guards enclose the cutting chamber to contain spoil and set the reference for cut depth, riding on skid shoes/skis at the outer edges of the rotor housing. These are wear/guarding components replaced as maintenance items rather than customer-selectable work-tool options.
Undercarriage and steering
The machine rides on four independent track units (dual front, dual rear) rather than wheels, giving independent steering at each corner for tight-radius and edge work; this is a fixed factory configuration for the model, not an interchangeable option.
Operator station protection
Cat cold planers in this size class commonly offer an operator canopy with optional front/rear windscreens as factory-fit weather protection; this has not been separately confirmed against PM-565-specific literature, so verify canopy/windscreen availability with a dealer for a given serial range.
All PM-565 assemblies by section
Every catalogued assembly group for the Caterpillar PM-565. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
4n-5833 Aftercooler Gp-Water
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 16 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 1 |
7r-7774 Air Cleaner Gp
| 10***92 | Dust Ejector Group | 1 |
| 1G***64 | Tube As | 1 |
| 1G***78 | U-Bolt | 1 |
7n-0688 Air Cleaner Gp
| 6N***23 | Cup As-Air Cleaner | 1 |
| 6N***60 | Rod Assem. | 2 |
| 6N***92 | Gasket | 1 |
4n-7601 Cartridge Gp-Turbocharger
| 2W***27 | Kit-Cartridge; (Turbocharger) | 1 |
| 4M***83 | Ring,Retaining Bearing | 4 |
| 4M***13 | Ring,Retaining | 1 |
102-8492 Dust Ejector Gp
| 06***76 | Elbow | 1 |
| 06***89 | Reducer | 1 |
| 10***44 | Tube | 1 |
1w-4751 Extension Gp-Exhaust
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 1 |
| 1W***51 | Extension Group-Exhaust | 1 |
6i-3833 Kit-Air Cleaner
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 10***65 | Guide-Element | 3 |
| 1P***90 | Gasket-Outlet; (Air Cleaner) | 1 |
107-9375 Lines Gp-Air
| 00***54 | Nipple-Pipe | 1 |
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 00***33 | Tee-Pipe | 1 |
1w-6843 Lines Gp-Air
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 11***60 | Tube As | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
8n-0080 Manifold Gp-Exhaust
| 10***06 | Manifold-Exhaust; (End) | 2 |
| 10***12 | Manifold-Exhaust | 2 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 16 |
7r-7775 Muffler Gp
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 1 |
| 1W***51 | Extension Group-Exhaust | 1 |
| 1W***94 | Clamp As | 1 |
103-9412 Shield Gp-Manifold
| 10***02 | Shield | 1 |
| 10***03 | Shield | 1 |
| 10***12 | Shield Group-Manifold | 1 |
1w-0412 Turbocharger Gp
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 1W***12 | Turbocharger Group; Turbocharger Group | 1 |
| 1W***97 | Turbocharger Group | 1 |
1w-3897 Turbocharger Gp
| 1W***97 | Turbocharger Group | 1 |
| 1W***98 | Housing (Turbine) | 1 |
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
Air System
108-6531 Changeover Ar
| 10***31 | Changeover Ar | 1 |
| 1G***82 | Guard | 1 |
| 1G***83 | Reservoir | 1 |
107-9376 Filter Gp-Air
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 08***44 | Reservoir | 2 |
| 10***54 | Bracket As | 2 |
8c-0496 Lubricator Gp-Air
| 08***44 | Reservoir | 2 |
| 1P***97 | Valve-Drain; (Radiator) | 2 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
116-7776 Pneumatic Ar
| 00***07 | Elbow; (90 Degree) | 1 |
| 03***46 | Elbow | 1 |
| 05***26 | Tee | 1 |
107-9377 Tank Gp-Air
| 00***07 | Elbow; (90 Degree) | 1 |
| 05***26 | Tee | 1 |
| 10***77 | Tank Group-Air | 1 |
116-7780 Tank Gp-Air
| 08***75 | Adapter | 1 |
| 08***08 | Fitting | 2 |
| 08***23 | Fitting | 1 |
Basic Engine
107-9371 Air Compressor Gp
| 10***20 | Plate As | 1 |
| 10***71 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
6n-6090 Air Compressor Gp
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1S***07 | Gasket | 1 |
| 2F***94 | Stud (1 9/16" Long) | 2 |
4n-0963 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***74 | Gear-Camshaft Drive; (86-Teeth) | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
1w-4989 Cover Gp-Cylinder Block
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 1W***89 | Cover Group-Cylinder Block; Cylinder Block Cover Group | 1 |
4n-6876 Cover Gp-Flywheel Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 4N***14 | Cover | 1 |
| 4N***76 | Cover Group-Flywheel Housing; Flywheel Housing Cover Group | 1 |
7w-6810 Cover Gp-Front Housing
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 5 |
4n-6798 Cover Gp-Front Housing
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
6i-2747 Cover Gp-Oil Pan
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 10***72 | Seal-O-Ring; (40.64-mm Id) | 1 |
4w-6828 Cover Gp-Valve Mechanism
| 4P***22 | Base-Valve Mechanism Cover | 2 |
| 4W***28 | Cover Group-Valve Mechanism | 1 |
| 5P***78 | Seal; (2.3-M) (Valve Mechanism Cover) | 0 |
1w-5009 Crankshaft As
| 1W***09 | Crankshaft As | 1 |
| 4N***84 | Dowel; (.75 Long) | 1 |
| 7N***91 | Gear-Crankshaft; (80-Teeth) | 1 |
1w-5010 Crankshaft Gp
| 1W***09 | Crankshaft As | 1 |
| 1W***10 | Crankshaft Group; Crankshaft Group | 1 |
| 25***52 | Plate-Thrust; (Crankshaft) | 2 |
110-3779 Cylinder Block As
| 11***20 | Seal-O-Ring; (Mid-Liner) | 8 |
| 11***79 | Cylinder Block As | 1 |
| 14***17 | Seal-O-Ring; (140.20mm Id) | 8 |
1w-5081 Cylinder Block As
| 11***20 | Seal-O-Ring; (Mid-Liner) | 24 |
| 1W***81 | Cylinder Block As | 1 |
| 2W***00 | Liner-Cylinder Block | 8 |
1w-5082 Cylinder Block Gp
| 10***23 | Insert-Liner Seat; (5.21-mm Thk)(5.21mm Thk) | 0 |
| 11***27 | Seal-O-Ring; (19.18mm Id) | 4 |
| 11***09 | Cylinder Block As | 1 |
143-0040 Cylinder Head As
| 14***40 | Cylinder Head As | 1 |
| 1W***83 | Insert-Valve Seat; (Exhaust)(Standard) | 8 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 8 |
7w-2223 Cylinder Head As
| 1W***83 | Insert-Valve Seat; (Exhaust)(Standard) | 8 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 8 |
| 3B***45 | Plug Flywheel Housing Turbocharger Drain Hole | 6 |
7w-2225 Cylinder Head As
| 14***40 | Cylinder Head As | 1 |
| 17***88 | Guide-Valve; (Standard) | 16 |
| 2N***75 | Dowel | 8 |
105-3788 Cylinder Head As
| 10***88 | Cylinder Head As | 1 |
| 1W***83 | Insert-Valve Seat; (Exhaust)(Standard) | 8 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 8 |
4w-7005 Cylinder Head Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 11 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
7w-2224 Cylinder Head Gp
| 10***88 | Cylinder Head As | 1 |
| 11***67 | Valve (Exhaust) | 8 |
| 11***68 | Valve (Inlet) | 8 |
1w-0998 Damper Gp
| 1A***03 | Bolt 12.07 cm(4.75 In.) Long | 6 |
| 1W***98 | Damper Group | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 6 |
4n-0739 Flywheel Gp
| 1A***03 | Bolt 12.07 cm(4.75 In.) Long | 12 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 12 |
| 4N***39 | Flywheel Group; Flywheel Group | 1 |
7n-2840 Gear Gp-Front -Timing
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 11***17 | Plate-Thrust | 1 |
| 11***12 | Shaft-Drive Idler | 1 |
6i-1970 Gear Gp-Rear
| 03***94 | Connector-Flared | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 16 |
6i-4665 Housing Gp-Flywheel
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 4 |
4n-5226 Housing Gp-Front
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 16***45 | Gasket-Cylinder Block | 1 |
7n-1750 Lifting Gp-Engine
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 7N***50 | Lifting Group; Engine Lifting Group | 1 |
116-7777 Lines Gp-Air Compressor
| 00***99 | Tee To Bushing | 1 |
| 00***26 | Connector; (Flared)(3/4-16 Thd, 47 mm Long) | 1 |
| 10***85 | Hose As | 1 |
107-9373 Lines Gp-Air Compressor
| 00***43 | Elbow; (12.7mm Id) | 1 |
| 03***61 | Elbow; (45 Degree) | 1 |
| 03***95 | Connector-Flared | 1 |
2w-0477 Pan Gp-Oil -Engine
| 2P***03 | Bolt-Washer Head; (3/8-16x1.25-In) | 32 |
| 2W***77 | Pan Group-Oil; -Engine | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 3 |
2w-9054 Piston & Rod Gp
| 13***61 | Ring-Piston; (Top)(Top) | 1 |
| 16***78 | Rod As-Connecting | 1 |
| 2P***17 | Ring-Piston; (Intermediate)(Intermediate) | 1 |
7r-9810 Pulley Gp-Fan Drive
| 08***32 | Spacer | 1 |
| 1A***51 | Bolt,Machine Hydraulic Tank Mtg | 6 |
| 1B***67 | Bolt, Hex. Hd., 5/8"-11 N.C. X 3" | 4 |
4n-1718 Rocker Arm Gp
| 00***03 | Ring-Retaining | 2 |
| 0L***22 | Plug (.656" Dia.) | 2 |
| 10***03 | Screw; (3/8-24x1.67-In)(Intake) | 8 |
319-7401 Seal Gp-Crankshaft -Front
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 31***01 | Seal Group-Crankshaft; -Front | 1 |
319-0785 Seal Gp-Crankshaft -Rear
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
108-2796 Support Gp-Engine
| 10***96 | Support Group-Engine | 1 |
| 22***72 | Support-Engine | 1 |
| 2H***88 | Bolt- 12 cm(4.75 In.) Long-Location "F" | 2 |
086-9546 Support Gp-Engine
| 08***46 | Support Group-Engine | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 2 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
7e-0504 Support Gp-Engine
| 2H***88 | Bolt- 12 cm(4.75 In.) Long-Location "F" | 2 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 2 |
| 6N***65 | Bracket | 1 |
086-9562 Support Gp-Engine
| 08***79 | Mount As | 1 |
| 08***62 | Support Group-Engine | 1 |
| 6Y***80 | Mount As-Marc | 2 |
4n-4298 Valve Mechanism Gp
| 10***88 | Valve Lifter Assem | 16 |
| 2N***42 | Screw; (3/8-24x1-In)(Bridge Adjusting) | 2 |
| 2P***45 | Bolt-Head Assembly To Cylinder Block | 8 |
Braking System
1g-8121 Brake Gp -Rotor
| 10***85 | Hose As | 1 |
| 10***44 | Hose As | 1 |
| 10***45 | Hose As | 1 |
1g-7792 Brake Gp -Rotor
| 10***85 | Hose As | 1 |
| 10***44 | Hose As | 1 |
| 10***45 | Hose As | 1 |
1g-7886 Hydraulic Ar-Brake
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 10***51 | Hose As | 1 |
| 10***52 | Hose As | 2 |
1g-7916 Lines Gp-Service Brake
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 10***98 | Kit-Seal; (Steering Cylinder) | 1 |
| 1G***16 | Lines Group-Service Brake | 1 |
1g-7802 Lines Gp-Service Brake
| 08***62 | Ring | 2 |
| 11***37 | Shaft | 1 |
| 1G***02 | Lines Group-Service Brake | 1 |
Cooling System
1g-9961 Coolant Conditioner Gp
| 10***10 | Hose As | 1 |
| 10***11 | Hose As | 1 |
| 1G***61 | Coolant Conditioner Group | 1 |
7w-2206 Cooler Gp-Engine Oil
| 10***77 | Seal-O-Ring; (100.97mm Id) | 2 |
| 7C***39 | Core As; (Engine Oil Cooler) | 1 |
| 7W***06 | Cooler Group-Engine Oil | 1 |
1g-7769 Fan Gp-Blower
| 1G***69 | Fan Group-Blower | 1 |
| 2H***86 | Nut-Jam; (1-14-Thd) | 1 |
| 2W***84 | Spider As-Fan; (8 Blades) | 1 |
1g-7768 Guard Gp-Fan
| 1G***68 | Guard Group-Fan | 1 |
| 4M***25 | B. 5/16 N.C. X 1" | 20 |
| 6N***99 | Clip | 4 |
1g-7767 Lines Gp-Coolant
| 07***69 | Hose; (614cm) | 0 |
| 1G***67 | Lines Group-Coolant | 1 |
| 1G***77 | Tube As | 1 |
6n-0144 Lines Gp-Water
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 7 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 5 |
4n-7174 Lines Gp-Water
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 5 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
115-4332 Lines Gp-Water
| 00***07 | Elbow; (90 Degree) | 1 |
| 00***15 | Insert | 2 |
| 03***62 | Elbow, Swivel Nut 45 Degrees (-6) | 1 |
116-2467 Lines Gp-Water
| 00***07 | Elbow; (90 Degree) | 1 |
| 00***15 | Insert | 2 |
| 03***62 | Elbow, Swivel Nut 45 Degrees (-6) | 1 |
1g-7933 Motor & Mtg Gp-Hydraulic Fan
| 1G***55 | Motor Group-Gear | 1 |
| 1G***33 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 4 |
1g-8559 Mounting Gp-Radiator
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 20 |
| 05***33 | Mounting-Engine | 4 |
| 1G***27 | Mount As-Motor | 1 |
4n-7498 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 1 |
4n-1951 Pump Gp-Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 4 |
| 4N***51 | Pump Group-Water; Water Pump Group | 1 |
105-0197 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***97 | Pump Group-Water | 1 |
| 10***85 | Retainer | 1 |
7r-9922 Radiator Gp
| 1G***66 | Radiator Group | 1 |
| 1G***67 | Lines Group-Coolant | 1 |
| 1G***68 | Guard Group-Fan | 1 |
1g-7766 Radiator Gp
| 10***73 | Cap-Radiator | 1 |
| 10***75 | Damper-Vibration; (100-M) | 0 |
| 10***60 | Tank As-Top | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
086-9498 Alternator Gp-Charging
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 08***98 | Alternator Group-Charging | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
316-7251 Alternator Gp-Charging
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 2 |
| 08***79 | Cable As | 1 |
| 10***28 | Cable As; (Control) | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
197-8820 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
108-4552 Alternator Gp-Charging
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 10***22 | Bracket As | 1 |
| 10***12 | Cable As | 1 |
1g-9475 Battery & Wiring Gp
| 1G***75 | Battery & Wiring Group | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
9w-0742 Block Gp-Junction -Battery
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 08***48 | Block - Contact | 1 |
116-8074 Box Gp-Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 10***91 | Switch As-Toggle; (Rotor Moldboard Raise / Lower) | 1 |
| 11***66 | Harness As | 1 |
106-1362 Box Gp-Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 10***62 | Box Group-Control | 1 |
| 11***95 | Harness As | 1 |
116-8073 Box Gp-Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 10***91 | Switch As-Toggle; (Rotor Moldboard Raise / Lower) | 1 |
| 11***66 | Harness As | 1 |
116-8072 Box Gp-Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 08***48 | Block - Contact | 1 |
116-8071 Box Gp-Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 11***95 | Harness As | 1 |
| 11***73 | Knob; (Red)(Emergency Stop) | 1 |
110-2882 Box Gp-Rotor Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 11***81 | Harness As-Box; (Rotor Control) | 1 |
| 11***82 | Box Group-Rotor Control | 1 |
102-2220 Box Gp-Rotor Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 08***48 | Block - Contact | 1 |
6r-3010 Control & Mtg Gp-Rotor Elek
| 16***92 | Block As-Mounting; (Position Sensor) | 1 |
| 16***34 | Mount As | 1 |
| 16***00 | Arm As | 1 |
1g-7777 Control & Mtg Gp-Steering
| 1G***77 | Control & Mtg Group-Steering | 1 |
| 21***80 | Knob | 1 |
| 21***81 | Knob | 2 |
114-1774 Control Gp-Grade & Slope
| 11***74 | Control Group-Grade & Slope | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-4381 Lamp Gp-Flood
| 7X***98 | Connector-End | 1 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 2 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
110-7564 Lamp Gp-Service
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***64 | Lamp Group-Service | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
103-1218 Lamp Gp-Service
| 10***18 | Lamp Group-Service | 1 |
| 7X***98 | Connector-End | 1 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 2 |
3e-6466 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 3 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 1G***81 | Harness As-Lighting | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 22 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***36 | Plate | 1 |
| 10***64 | Mount-Sandwich | 3 |
| 1G***31 | Support As | 1 |
9x-9556 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
086-9856 Lighting Gp-Flood
| 03***14 | Screw; (10-32x1-In) | 3 |
| 08***56 | Lighting Group-Flood | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
110-9746 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 4 |
| 11***46 | Lighting Group-Warning Beacon | 1 |
| 1G***13 | Bar-Bus | 1 |
1g-9659 Lighting Gp-Warning Beacon
| 1G***59 | Lighting Group-Warning Beacon | 1 |
| 1G***21 | Bracket | 1 |
| 1G***22 | Tube | 1 |
1g-7770 Mounting Gp-Sensor
| 08***46 | Relay; (24-Volt) | 2 |
| 1G***70 | Mounting Group-Sensor | 1 |
| 1G***36 | Plate As | 1 |
1g-9515 Panel Gp-Circuit Breaker
| 13***54 | Bracket | 1 |
| 13***56 | Rheostat As; (Right Front Leg Speed) | 2 |
| 13***58 | Film-Instruction; (Track Control) | 1 |
117-6576 Panel Gp-Relay
| 11***76 | Panel Group-Relay | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 1 |
| 1H***24 | Bushing (.375" External Thread) | 1 |
133-2257 Rheostat Gp-Speed Control
| 13***57 | Rheostat Group-Speed Control | 1 |
| 1G***98 | Sensor Group-Position; -Elevation | 2 |
| 1G***99 | Sensor Group-Position; -Elevation | 2 |
105-8030 Sender Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Diode-Zener | 1 |
| 10***30 | Sender Group | 1 |
1g-9610 Sensor & Mtg Gp-Elevation
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***03 | Diode-Zener | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
6r-0486 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
214-4863 Sensor Gp-Position
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
1g-9499 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 1G***99 | Sensor Group-Position; -Elevation | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
1g-9498 Sensor Gp-Position
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 1G***98 | Sensor Group-Position; -Elevation | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
9x-5592 Sensor Gp-Position
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
3e-8652 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 1V***41 | Seal | 1 |
9x-5272 Sensor Gp-Pressure
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
| 9X***72 | Sensor Group-Pressure; (Brake Air Press Snsr) | 1 |
113-5276 Sensor Gp-Speed
| 11***76 | Sensor Group-Speed; -Engine | 1 |
| 1W***70 | Switch As-Start | 1 |
| 3B***95 | Screw,Cap,Hexagon Fuel Injection Pump | 2 |
100-4505 Sensor Gp-Speed
| 10***05 | Sensor Group-Speed | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1V***41 | Seal | 1 |
100-6620 Sensor Gp-Speed -Propel
| 10***20 | Sensor Group-Speed; -Propel | 1 |
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
193-5518 Sensor Gp-Speed
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
3e-8700 Sensor Gp-Temperature
| 3E***00 | Sensor Group-Temperature; -Transmission Oil | 1 |
| 4N***59 | Gasket; (Starting Motor) | 1 |
| 6V***90 | Starting Motor Group-Electric; (Delco Remy) | 1 |
100-5363 Shutoff Gp-Electrical
| 10***63 | Shutoff Group-Electrical | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
6v-0890 Starting Motor Gp-Electric
| 17***08 | Switch Group-Flow; -Engine Coolant | 1 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
| 4N***41 | Gasket Transmission Oil Cooler | 1 |
108-6570 Starting Motor Gp-Electric
| 10***70 | Starting Motor Group-Electric | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
100-4417 Switch Gp-Flow
| 01***80 | Lockwasher | 2 |
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
175-2322 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
3e-0075 Switch Gp-Magnetic
| 13***80 | Film-Instruction; (Cutter Hazard, Stay Back) | 1 |
| 13***81 | Film-Instruction; (Cutter Hazard, Stay Back) | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2324 Switch Gp-Magnetic
| 10***34 | Harness As-Console | 1 |
| 10***51 | Harness As | 2 |
| 12***80 | Filter-Foam; (Grade Sensor) | 1 |
137-8092 Switch Gp-Rotor Door
| 10***51 | Harness As | 2 |
| 12***72 | Harness As-Console | 1 |
| 12***80 | Filter-Foam; (Grade Sensor) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 5 |
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 4 |
| 08***52 | Lamp-Led | 1 |
102-2232 Wiring Gp-Center
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 5 |
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 4 |
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 2 |
117-8247 Wiring Gp-Console
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 5 |
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 4 |
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 2 |
120-7706 Wiring Gp-Console
| 10***69 | Harness As-Front | 1 |
| 11***96 | Harness As | 1 |
| 11***71 | Box Group-Control | 1 |
117-8246 Wiring Gp-Front
| 10***32 | Wiring Group-Center | 1 |
| 11***46 | Wiring Group-Front | 2 |
| 11***48 | Wiring Group-Rear | 1 |
120-7707 Wiring Gp-Front
| 08***56 | Nut | 2 |
| 0L***07 | Grommet | 1 |
| 10***62 | Harness As-Sensor; (Travel Speed) | 1 |
106-4609 Wiring Gp-Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***09 | Wiring Group-Front | 1 |
| 11***93 | Harness As | 1 |
1g-9474 Wiring Gp-Machine
| 10***32 | Harness As | 1 |
| 10***20 | Box Group-Rotor Control | 1 |
| 1G***74 | Wiring Group-Machine | 1 |
117-8248 Wiring Gp-Rear
| 11***80 | Harness As-Console | 1 |
| 11***82 | Box Group-Rotor Control | 1 |
| 11***48 | Wiring Group-Rear | 1 |
120-7708 Wiring Gp-Rear
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 8 |
| 0V***75 | Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive | 2 |
1g-9473 Wiring Gp-Rotor
| 08***56 | Nut | 24 |
| 08***73 | Clamp | 30 |
| 08***35 | Tee | 1 |
Engine Arrangement
6i-2565 Engine Ar
| 10***53 | Lines Group-Fuel | 1 |
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 10***05 | Sensor Group-Speed | 1 |
086-9598 Installation Ar-Engine
| 08***98 | Alternator Group-Charging | 1 |
| 08***46 | Support Group-Engine | 1 |
| 08***62 | Support Group-Engine | 1 |
Frame And Body
7g-4831 Cap Gp-Track Roller
| 1G***32 | Door As | 1 |
| 2G***82 | Bumper | 2 |
| 3B***28 | Cotter Pin To Bracket Assembly | 2 |
1g-8227 Cover Gp-Rear
| 1G***41 | Door As | 1 |
| 1G***27 | Cover Group-Rear | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 3 |
1g-7775 Cover Gp-Rear
| 1G***75 | Cover Group-Rear | 1 |
| 1G***22 | Plate As | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 12 |
1g-8226 Door Gp-Access
| 16***91 | Tightener | 2 |
| 1F***50 | Nut Rops Support | 64 |
| 1G***26 | Door Group-Access | 1 |
1g-8170 Door Gp-Access -Rear
| 1G***70 | Door Group-Access; -Rear | 2 |
| 1G***26 | Door Group-Access | 1 |
| 1G***27 | Cover Group-Rear | 1 |
1g-7780 Door Gp-Storage
| 08***10 | Mounting Group-Water Inlet | 1 |
| 08***77 | Frame As-Conveyor | 1 |
| 08***47 | Guard Group-Conveyor | 1 |
1g-7772 Enclosure Gp-Engine
| 08***63 | Frame As | 1 |
| 1G***72 | Enclosure Group-Engine | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
087-0049 Frame As
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 08***63 | Frame As | 1 |
| 08***49 | Frame As | 1 |
087-0126 Frame Gp
| 08***26 | Frame Group | 1 |
| 10***29 | Plate As | 1 |
| 11***53 | Channel | 1 |
086-9855 Frame Gp
| 08***01 | Insert | 4 |
| 08***55 | Frame Group | 1 |
| 08***00 | Hinge Group-Steering | 1 |
7r-9170 Frame Gp-Telescoping
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 44 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 12 |
| 7R***56 | Sheet As | 1 |
124-8306 Frame Gp-Telescoping
| 12***06 | Frame Group-Telescoping | 1 |
| 18***54 | Guard As | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 6 |
1g-7773 Guard Gp-Belt
| 10***82 | Support Group-Hood | 1 |
| 1G***73 | Guard Group-Belt | 1 |
| 1G***96 | Plate As | 1 |
087-0054 Guard Gp-Bottom
| 08***54 | Guard Group-Bottom | 1 |
| 10***82 | Support Group-Hood | 1 |
| 1G***96 | Plate As | 1 |
1g-7791 Guard Gp-Drive Shaft
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 13***18 | Washer-Thrust | 2 |
| 1G***91 | Guard Group-Drive Shaft | 1 |
1g-8228 Hood Gp
| 08***27 | Plate | 1 |
| 08***22 | Support As; (Lh) | 1 |
| 08***23 | Support As; (Rh) | 1 |
6t-2614 Idler Gp-Track
| 05***39 | Screw-Shoulder | 4 |
| 08***87 | Cap | 3 |
| 08***36 | Rail As | 1 |
7r-9160 Idler Gp-Track
| 05***39 | Screw-Shoulder | 2 |
| 08***87 | Cap | 3 |
| 08***36 | Rail As | 1 |
125-0695 Idler Gp-Track
| 06***70 | Pin | 2 |
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 10***62 | Ladder As | 1 |
1g-7211 Ladder Gp
| 1G***11 | Ladder Group | 1 |
| 1G***96 | Rod-Threaded | 1 |
| 1G***98 | Bar-Round | 1 |
1g-9658 Ladder Gp
| 08***73 | Clamp | 12 |
| 10***44 | Tube As | 2 |
| 10***45 | Tube As | 2 |
8y-6400 Latch Gp
| 7K***18 | Washer (Seal) | 104 |
| 7K***20 | Bushing-Terminal; (Master) | 1 |
| 8Y***00 | Latch As; -Radiator Guard, Striker Bar | 1 |
1g-8997 Latch Gp -Rear
| 08***00 | Bar | 3 |
| 10***76 | Clamp-Half | 4 |
| 10***03 | Hose As | 1 |
106-5140 Lines Gp-Grease
| 10***40 | Lines Group-Grease | 1 |
| 1G***76 | Plate | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
106-5143 Lines Gp-Grease
| 08***25 | Plate | 1 |
| 10***58 | Plate | 1 |
| 10***43 | Lines Group-Grease | 1 |
6y-8795 Link As-Track
| 09***78 | Pin-Spring | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
1g-7237 Plate Gp
| 10***30 | Rod | 1 |
| 1G***37 | Plate Group | 1 |
| 6V***61 | Rod End | 1 |
1g-7177 Plate Gp
| 03***21 | U-Bolt | 4 |
| 08***09 | Bracket | 6 |
| 08***10 | Bracket | 2 |
105-3117 Ski Ar-Averaging
| 08***29 | Arm | 1 |
| 10***17 | Ski Ar-Averaging | 1 |
| 1A***10 | Dowel (1.50" Long) | 2 |
104-4982 Support Gp-Hood
| 08***92 | Arm | 1 |
| 10***82 | Support Group-Hood | 1 |
| 1A***10 | Dowel (1.50" Long) | 2 |
1g-7774 Support Gp-Service
| 08***29 | Arm | 1 |
| 12***95 | Bearing | 1 |
| 12***27 | Retainer | 1 |
086-9561 Support Gp-Undercarriage
| 08***61 | Support Group-Undercarriage | 1 |
| 10***33 | Suppression Group-Sound | 1 |
| 10***89 | Foam | 1 |
086-9560 Support Gp-Undercarriage
| 08***92 | Arm | 1 |
| 08***60 | Support Group-Undercarriage | 1 |
| 12***95 | Bearing | 1 |
122-4235 Support Gp-Undercarriage -Front, Rh; Rear, Lh
| 08***37 | Pipe | 1 |
| 08***63 | Piston | 1 |
| 12***35 | Support Group-Undercarriage; -Front, Rh; Rear, Lh | 1 |
122-4234 Support Gp-Undercarriage -Front, Lh; Rear, Rh
| 10***90 | Foam | 1 |
| 10***94 | Foam | 1 |
| 10***95 | Foam | 1 |
104-3233 Suppression Gp-Sound
| 10***33 | Suppression Group-Sound | 1 |
| 1M***08 | Nut-Track | 104 |
| 6Y***95 | Link As-Track | 1 |
103-1970 Suppression Gp-Sound
| 08***37 | Pipe | 1 |
| 08***63 | Piston | 1 |
| 10***70 | Suppression Group-Sound | 1 |
087-0240 Track Adjuster & Recoil Gp
| 08***38 | Planetary Group-Final Drive | 1 |
| 08***40 | Track Adjuster & Recoil Group | 2 |
| 08***64 | Shaft | 2 |
7r-9159 Track Gp -Rh
| 10***13 | Shoe-Track; (Metal) | 26 |
| 1M***08 | Nut-Track | 104 |
| 6Y***95 | Link As-Track | 1 |
121-9591 Track Gp -Rh
| 10***42 | Screw-Machine | 8 |
| 10***45 | Lining | 2 |
| 10***46 | Ring-Backup | 2 |
132-1474 Track Gp
| 13***74 | Track Group | 1 |
| 1G***16 | Lines Group-Service Brake | 1 |
105-5011 Track Gp
| 10***11 | Track Group | 3 |
106-3093 Track Gp
| 10***93 | Track Group | 1 |
| 10***99 | Track Group | 2 |
106-3099 Track Gp
| 10***32 | Track Group | 4 |
| 10***99 | Track Group | 1 |
6y-8796 Track Gp
| 08***40 | Track Adjuster & Recoil Group | 1 |
| 08***64 | Shaft | 2 |
| 10***36 | Adapter-Motor | 1 |
106-1832 Track Gp
| 10***11 | Track Group | 4 |
| 10***32 | Track Group | 1 |
106-3096 Track Gp
| 10***96 | Track Group | 1 |
| 1M***08 | Nut-Track | 104 |
| 23***82 | Shoe As-Track; (Padded)(Poly) | 26 |
106-3098 Track Gp
| 08***40 | Track Adjuster & Recoil Group | 1 |
| 10***36 | Adapter-Motor | 1 |
| 10***98 | Track Group | 1 |
106-3097 Track Gp
| 08***40 | Track Adjuster & Recoil Group | 1 |
| 10***36 | Adapter-Motor | 1 |
| 10***97 | Track Group | 1 |
7r-9158 Track Gp -Lh
| 08***40 | Track Adjuster & Recoil Group | 1 |
| 08***64 | Shaft | 2 |
| 10***36 | Adapter-Motor | 1 |
121-9590 Track Gp -Lh
| 0L***69 | Bolt (5/8-11 Thd X 3.750 In Long | 3 |
| 0S***93 | Bolt (1 1/4" Long) | 12 |
| 12***90 | Track Group; -Lh | 1 |
7g-4836 Roller Gp-Track-Single Flange
| 1G***59 | Bolt; (1-14x2.5-In) | 2 |
| 1G***60 | Support | 1 |
| 1G***96 | Spacer; (1.46-In Thk) | 2 |
Fuel System
3n-7741 Control Gp-Governor
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 3N***41 | Control Group-Governor | 1 |
| 5L***71 | Lever-Governor Control | 1 |
1g-8626 Control Gp-Governor
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 1 |
| 1G***26 | Control Group-Governor | 1 |
9n-3959 Drive Gp-Governor & Fuel Pump
| 5J***93 | Bolt-12 Point Head; (1/2-13x1.75-In)(Marked Z) | 4 |
| 6N***93 | Ring | 1 |
| 6N***23 | Slide | 2 |
2w-2094 Drive Gp-Tachometer
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 2W***94 | Drive Group-Tachometer; Tachometer Drive Group | 1 |
| 4M***03 | Packing,Preformed Hourmeter Mtg | 1 |
9y-3764 Fastener Gp-Fuel Inj Pump
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 6 |
7r-9855 Filter & Lines Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***56 | Elbow; (90 Degree) | 1 |
| 10***07 | Hose As; (Marked J) | 1 |
4n-1981 Filter Gp-Fuel -Engine
| 1N***89 | Base As-Filter; (Fuel) | 1 |
| 1R***49 | Filter-Fuel; (Advanced Efficiency)(Secondary) | 1 |
| 4N***81 | Filter Group-Fuel | 1 |
6n-1044 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 6N***44 | Filter Group-Primary Fuel; Primary Fuel Filter Group | 1 |
4w-2922 Governor Gp
| 06***08 | Ring-Retaining | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 2 |
7n-4574 Housing Gp-Fuel Pump
| 1P***32 | Ball,Bearing | 8 |
| 1P***34 | Pin,Grooved | 8 |
| 4M***74 | Pin-Lifter Guide | 4 |
100-4253 Lines Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***63 | Adapter - 45degrees - 8 Valve Ports P, T, C1, C2; (45°) (-8, Valve Ports, P, T, C1, C2) | 1 |
| 10***53 | Lines Group-Fuel | 1 |
7n-8243 Lines Gp-Fuel Drain
| 2B***04 | Clip (1.062" Long); (1/4 In Id Opening) | 1 |
| 5P***11 | Tube; (Housing Drain/Manual Bleed) | 0 |
| 7N***43 | Lines Group-Fuel Drain | 1 |
7e-6847 Lines Gp-Fuel Injection
| 06***38 | Spacer; (11.12x19.05x7.9-mm Thk) | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 3 |
6i-0030 Lines Gp-Fuel Injection
| 10***38 | Screw-Machine | 1 |
| 10***39 | Screw As | 2 |
| 12***45 | Line As-Fuel Injection; (No. 5) | 1 |
4w-7018 Injector Gp-Fuel
| 11***62 | Seal-O-Ring | 1 |
| 1W***91 | Tip As-Fuel Injector | 1 |
| 27***89 | Seal-Washer | 1 |
6n-5314 Piston Gp-Governor Servo
| 4N***07 | Cylinder-Servo | 1 |
| 5P***57 | Seal-O-Ring; (18.77mm Id) | 1 |
| 6N***14 | Piston Group-Governor Servo | 1 |
4w-2921 Plate Gp-Governor Adapter
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 1W***40 | Seat-Spring | 1 |
| 1W***41 | Riser-Governor | 1 |
7w-0561 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 1W***71 | Bonnet-Valve | 1 |
| 7C***78 | Bolt-Plunger Gear; (Fuel Pump) | 1 |
4w-6012 Pump Gp-Fuel Injection
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 3 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 8 |
| 1T***84 | Bolt-Socket Head; (5/16-18x1-In) | 1 |
4w-5479 Pump Gp-Fuel Transfer
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 1P***98 | Valve As; (Fuel Check) | 1 |
| 1W***77 | Shaft-Idler | 1 |
8n-1630 Pump Gp-Fuel Transfer
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
4w-7199 Pump Gp-Gov, Fuel Inj & Tfr
| 2N***28 | Washer; (Spring-Two Waves) | 2 |
| 2P***43 | Gasket | 1 |
| 2P***56 | Washer; (1.17x1.5x0.06-In Thk)(Flat) | 1 |
7r-9849 Tank Gp-Fuel & Water
| 03***28 | Seal-O-Ring | 1 |
| 10***99 | Pad | 2 |
| 11***34 | Plate As-Cover | 1 |
9n-2893 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 1P***58 | Insulator .813mm(.032 In.) Thick | 1 |
| 2S***91 | Bar-Stop; 2.997mm(.118in)Thick | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 1G***77 | Cylinder Group-Hydraulic | 1 |
| 8J***83 | Pin | 1 |
1g-7752 Cylinder & Mtg Gp-Conveyor
| 1G***52 | Cylinder & Mtg Group-Conveyor | 1 |
| 1G***78 | Cylinder Group-Hydraulic | 1 |
| 8J***83 | Pin | 1 |
132-3933 Cylinder & Mtg Gp-Door -Front
| 12***92 | Cylinder Group-Hydraulic | 1 |
| 13***33 | Cylinder & Mtg Group-Door; -Front | 1 |
| 1B***18 | Nut-Castle | 1 |
1g-7907 Cylinder & Mtg Gp-Elevation
| 08***00 | Cylinder Group-Hydraulic; -Hood Tilt | 1 |
| 1G***07 | Cylinder & Mtg Group-Elevation | 1 |
| 3B***31 | Pin-Cotter | 2 |
124-8307 Cylinder & Mtg Gp-Elevation -Rear
| 11***48 | Cylinder Group-Hydraulic; -Side Plate | 4 |
| 12***07 | Cylinder & Mtg Group-Elevation; -Rear | 1 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 8 |
124-8308 Cylinder & Mtg Gp-Elevation
| 08***35 | Cylinder Group-Hydraulic | 1 |
| 12***08 | Cylinder & Mtg Group-Elevation | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
1g-7906 Cylinder & Mtg Gp-Elevation
| 1B***18 | Nut-Castle | 1 |
| 1G***06 | Cylinder & Mtg Group-Elevation | 1 |
| 20***33 | Cylinder Group-Hydraulic | 1 |
1g-7910 Cylinder & Mtg Gp-Hood
| 06***00 | Plug | 2 |
| 11***03 | Seal | 1 |
| 11***04 | Gland | 1 |
112-9873 Cylinder & Mtg Gp-Side Plate
| 06***00 | Plug | 2 |
| 11***73 | Cylinder & Mtg Group-Side Plate | 1 |
| 11***03 | Seal | 1 |
1g-7919 Cylinder & Mtg Gp-Tensioner
| 10***51 | Valve; (Lock) | 1 |
| 10***65 | Kit-Seal; (Mixing Chamber Tilt Cylinder) | 1 |
| 1G***19 | Cylinder & Mtg Group-Tensioner | 1 |
1g-9144 Cylinder Gp-Hydraulic -Mixing Chamber Tilt
| 03***39 | Ring-Back-Up | 1 |
| 06***00 | Plug | 2 |
| 16***04 | Seal-U-Cup | 2 |
5e-4182 Cylinder Gp-Hydraulic -Moldboard
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 11***78 | Seal-O-Ring | 1 |
| 11***79 | Seal | 1 |
5e-4131 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 03***39 | Ring-Back-Up | 1 |
| 06***00 | Plug | 2 |
111-8548 Cylinder Gp-Hydraulic -Side Plate
| 11***48 | Cylinder Group-Hydraulic; -Side Plate | 1 |
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 12***76 | Spacer | 1 |
209-4733 Cylinder Gp-Hydraulic
| 13***43 | Filter Group-Oil | 1 |
| 20***33 | Cylinder Group-Hydraulic | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
086-9600 Cylinder Gp-Hydraulic -Hood Tilt
| 08***00 | Cylinder Group-Hydraulic; -Hood Tilt | 1 |
| 12***73 | Wiper | 1 |
| 12***74 | Seal | 1 |
1g-8278 Cylinder Gp-Hydraulic
| 06***00 | Plug | 2 |
| 08***25 | Ring; (Backup) | 1 |
| 08***23 | Seal | 1 |
1g-8277 Cylinder Gp-Hydraulic
| 06***00 | Plug | 2 |
| 08***23 | Seal | 1 |
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
132-3934 Cylinder Gp-Hydraulic -Front Door
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 13***34 | Cylinder Group-Hydraulic; -Front Door | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
122-2692 Cylinder Gp-Hydraulic
| 12***92 | Cylinder Group-Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 1G***80 | Filter Group; (Hydraulic Oil) | 1 |
086-9735 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 08***35 | Cylinder Group-Hydraulic | 1 |
| 11***80 | Nylock | 2 |
5e-4092 Cylinder Gp-Hydraulic
| 10***97 | Kit-Seal; (Hood Tilt Cylinder) | 1 |
| 10***51 | Valve; (Lock) | 2 |
| 11***07 | Seal-Piston | 2 |
1g-7799 Filter & Mtg Gp-Hydraulic
| 05***15 | Gasket | 1 |
| 07***79 | Filter Element-Oil; (Ultra High Efficiency) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
1g-7895 Filter & Mtg Gp-Hydraulic
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***95 | Filter & Mtg Group-Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
122-1786 Filter Gp-Oil
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 1G***95 | Filter & Mtg Group-Hydraulic | 1 |
| 1G***23 | Pump & Mtg Group-Electric Drive | 1 |
133-5343 Filter Gp-Oil
| 13***43 | Filter Group-Oil | 1 |
| 1G***21 | Lines Group-Auxiliary Hydraulic; -Rotor | 1 |
| 1G***22 | Motor & Mtg Group-Auxiliary | 1 |
1g-9361 Filter Gp-Oil
| 00***54 | Nipple-Pipe | 2 |
| 08***12 | Coupling-Hose | 2 |
| 08***30 | Tube; (118.1 cm) | 0 |
6r-3638 Gauge Gp-Sight -Water Level
| 12***07 | Cylinder & Mtg Group-Elevation; -Rear | 2 |
| 12***08 | Cylinder & Mtg Group-Elevation | 2 |
| 12***97 | Lines Group-Lift Cylinder; -Elevation | 1 |
1g-7889 Hydraulic Ar-Accessory
| 1G***89 | Hydraulic Ar-Accessory | 1 |
| 1G***09 | Lines Group-Lift Cylinder; -Engine Enclosure | 1 |
| 1G***10 | Cylinder & Mtg Group-Hood | 2 |
1g-7888 Hydraulic Ar-Auxiliary Drive
| 13***23 | Lines Group-Lift Cylinder; -Front Door | 1 |
| 13***29 | Valve & Mtg Group-Door | 1 |
| 13***33 | Cylinder & Mtg Group-Door; -Front | 1 |
1g-7882 Hydraulic Ar-Elevation
| 13***23 | Lines Group-Lift Cylinder; -Front Door | 1 |
| 13***29 | Valve & Mtg Group-Door | 1 |
| 13***33 | Cylinder & Mtg Group-Door; -Front | 1 |
1g-7883 Hydraulic Ar-Enclosure
| 1G***83 | Hydraulic Ar-Enclosure | 1 |
| 1G***13 | Valve & Mtg Group-Moldboard | 1 |
| 1G***14 | Lines Group-Lift Cylinder; -Moldboard | 1 |
131-8746 Hydraulic Ar-Front Door
| 13***46 | Hydraulic Ar-Front Door | 1 |
| 1G***12 | Lines Group-Lift Cylinder; -Rear Door | 1 |
131-8747 Hydraulic Ar-Front Door
1g-7885 Hydraulic Ar-Moldboard
| 1G***85 | Hydraulic Ar-Moldboard | 1 |
| 1G***18 | Lines Group-Tensioner Cylinder | 1 |
| 1G***19 | Cylinder & Mtg Group-Tensioner | 1 |
1g-7884 Hydraulic Ar-Rear Door
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
| 1G***84 | Hydraulic Rear Axle Door | 1 |
112-9872 Hydraulic Ar-Side Plate
| 11***72 | Hydraulic Ar-Side Plate | 2 |
| 11***64 | Lug | 2 |
| 11***65 | Lug | 2 |
1g-7887 Hydraulic Ar-Tensioner
| 08***32 | Hose As | 1 |
| 10***52 | Hose As, . Head | 1 |
| 10***53 | Hose As | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 10***42 | Hose As | 1 |
| 10***43 | Hose As | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
114-4409 Lift Gp-Hydraulic Blade
| 08***99 | Bar | 2 |
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 11***70 | Hose As | 1 |
102-3035 Lines Gp-Auxiliary Hydraulic
| 10***21 | Hose As | 1 |
| 10***57 | Hose As | 1 |
| 10***82 | Hose As | 1 |
1g-7921 Lines Gp-Auxiliary Hydraulic -Rotor
| 10***84 | Tube As | 1 |
| 10***85 | Tube As | 1 |
| 10***82 | Hose As | 1 |
119-1501 Lines Gp-Door Cylinder
| 10***21 | Hose As | 1 |
| 10***57 | Hose As | 1 |
| 10***82 | Hose As | 1 |
1g-7896 Lines Gp-Hydraulic
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 0T***72 | Bolt; 7/16" Diameter X 1 1/2" Length Generator To Engine | 4 |
| 10***78 | Hose As | 1 |
1g-7936 Lines Gp-Hydraulic
| 10***33 | Hose As | 1 |
| 10***45 | Hose As | 2 |
| 10***12 | Hose As | 1 |
1g-7925 Lines Gp-Hydraulic
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 0T***72 | Bolt; 7/16" Diameter X 1 1/2" Length Generator To Engine | 4 |
| 10***77 | Hose As | 1 |
1g-7932 Lines Gp-Hydraulic
| 10***56 | Hose As | 1 |
| 10***57 | Hose As | 1 |
| 1G***32 | Lines Group-Hydraulic | 1 |
1g-7929 Lines Gp-Hydraulic
| 08***31 | Hose As | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 10***72 | Hose As | 1 |
119-1148 Lines Gp-Hydraulic -Water Spray Pump
| 09***60 | Hose As | 2 |
| 10***40 | Valve-Check | 1 |
| 10***73 | Hose As | 2 |
1g-7751 Lines Gp-Hydraulic
| 10***06 | Hose As | 1 |
| 10***89 | Hose As | 1 |
| 10***90 | Hose As | 1 |
1g-7930 Lines Gp-Hydraulic
| 08***56 | Nut | 6 |
| 08***91 | Adapter | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
1g-7898 Lines Gp-Hydraulic Oil Cooler
| 09***67 | Hose As | 2 |
| 10***39 | Hose As | 1 |
| 1G***98 | Lines Group-Hydraulic Oil Cooler | 1 |
1g-7937 Lines Gp-Hydraulic Oil Cooler
| 09***57 | Hose As | 2 |
| 1G***37 | Lines Group-Hydraulic Oil Cooler | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
1g-7905 Lines Gp-Lift Cylinder
| 10***37 | Valve Group-Check; (Front Auxiliary Manifold) | 2 |
| 10***38 | Valve Group-Check; (Mixing Chamber Tilt Cylinder) | 2 |
| 10***93 | Hose As | 1 |
101-4301 Lines Gp-Lift Cylinder -Conveyor
| 08***56 | Nut | 2 |
| 08***32 | Hose As | 1 |
| 10***21 | Hose As | 1 |
1g-7914 Lines Gp-Lift Cylinder -Moldboard
| 10***37 | Valve Group-Check; (Front Auxiliary Manifold) | 2 |
| 10***94 | Hose As | 1 |
| 12***25 | Hose As | 1 |
1g-7909 Lines Gp-Lift Cylinder -Engine Enclosure
| 10***44 | Film-Identification | 1 |
| 10***45 | Hose As | 1 |
| 1G***09 | Lines Group-Lift Cylinder; -Engine Enclosure | 1 |
132-3923 Lines Gp-Lift Cylinder -Front Door
| 08***99 | Bar | 2 |
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 11***70 | Hose As | 1 |
1g-7912 Lines Gp-Lift Cylinder -Rear Door
| 09***60 | Hose As | 2 |
| 10***40 | Valve-Check | 1 |
| 10***73 | Hose As | 2 |
124-8597 Lines Gp-Lift Cylinder -Elevation
| 08***99 | Bar | 2 |
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 10***03 | Hose As | 1 |
1g-7897 Lines Gp-Return
| 10***41 | Hose As | 1 |
| 10***43 | Hose As | 1 |
| 14***46 | Valve Group-Check | 1 |
112-9875 Lines Gp-Side Plate Cylinder
| 10***38 | Valve Group-Check; (Mixing Chamber Tilt Cylinder) | 1 |
| 10***50 | Hose As, . Casing; Pump | 1 |
| 10***51 | Hose As | 1 |
101-4300 Lines Gp-Swing Cylinder
| 10***00 | Lines Group-Swing Cylinder | 1 |
| 1G***28 | Plate-Isolation | 2 |
| 1G***31 | Retainer | 2 |
1g-7918 Lines Gp-Tensioner Cylinder
| 10***30 | Coupling-Shaft | 1 |
| 1G***18 | Lines Group-Tensioner Cylinder | 1 |
| 20***56 | Shaft | 1 |
1g-7922 Motor & Mtg Gp-Auxiliary
| 1C***10 | Arm-Torque | 1 |
| 1G***22 | Motor & Mtg Group-Auxiliary | 1 |
| 7R***78 | Motor Group-Gerotor | 1 |
1g-7855 Motor Gp-Gear
| 03***44 | Seal-O-Ring | 1 |
| 09***33 | Ring-Retaining | 1 |
| 10***00 | Kit-Check Valve | 1 |
7r-8278 Motor Gp-Gerotor
| 08***27 | Arm-Torque | 1 |
| 7R***78 | Motor Group-Gerotor | 2 |
| 8M***30 | Bolt-12 Point Head (1/2-13x1.25in); (1/2-13x1.25-In) | 4 |
101-3060 Motor Gp-Hydraulic
| 10***60 | Motor Group-Hydraulic | 1 |
| 10***15 | Motor | 1 |
| 10***20 | Kit-Pump; (Hood Tilt, Brake Release Pump) | 1 |
1g-7213 Motor Gp-Hydraulic
| 03***44 | Seal-O-Ring | 1 |
| 09***33 | Ring-Retaining | 1 |
| 10***00 | Kit-Check Valve | 1 |
086-9965 Motor Gp-Hydraulic
| 03***44 | Seal-O-Ring | 1 |
| 08***65 | Motor Group-Hydraulic | 1 |
| 10***00 | Kit-Check Valve | 2 |
1g-7938 Motor Gp-Hydraulic
| 10***50 | Seal-Shaft | 1 |
| 10***40 | Ball Bearing | 1 |
| 1G***38 | Motor Group-Hydraulic | 1 |
104-9523 Motor Gp-Hydraulic
| 10***23 | Motor Group-Hydraulic | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
7r-7209 Motor Gp-Hydraulic -Rotor
| 03***44 | Seal-O-Ring | 1 |
| 10***00 | Kit-Check Valve | 2 |
| 10***01 | Lens-Control | 1 |
1g-5449 Motor Gp-Hydraulic
| 09***39 | Key | 1 |
| 11***41 | Bolt-Torx Hd | 7 |
| 11***46 | Bolt-Torx | 4 |
104-9524 Motor Gp-Hydraulic
| 08***69 | Pump Group-Gear | 1 |
| 10***24 | Motor Group-Hydraulic | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
1g-9813 Pump & Motor Gp-Hydraulic
| 1G***13 | Pump & Motor Group-Hydraulic | 2 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 2 |
| 8T***96 | Washer-Hard- Line From Pipe As. To Gear | 2 |
1g-7894 Pump & Mtg Gp-Auxiliary
| 1G***54 | Pump Group-Piston | 1 |
| 1G***94 | Pump & Mtg Group-Auxiliary | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
1g-7926 Pump & Mtg Gp-Conveyor
| 10***54 | Flange | 1 |
| 10***55 | Housing-Gear | 1 |
| 10***56 | Cover-Rear | 1 |
1g-7923 Pump & Mtg Gp-Electric Drive
| 10***54 | Flange | 1 |
| 10***58 | Plate-Pressure | 4 |
| 10***59 | Dowel | 8 |
1g-7931 Pump & Mtg Gp-Hydraulic Fan
| 00***63 | Seal-O-Ring; (55.24mm Id) | 2 |
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 8 |
| 05***33 | Seal | 1 |
1g-8112 Pump Gp-Gear -Clutch
| 05***33 | Seal | 1 |
| 06***45 | Plug | 1 |
| 08***93 | Pin | 2 |
086-9969 Pump Gp-Gear
| 03***05 | Seal-O-Ring | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
7r-9953 Pump Gp-Piston
| 7R***57 | Tank Group-Hydraulic | 1 |
| 7R***53 | Pump Group-Piston | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
086-9871 Pump Gp-Piston
| 03***06 | Seal (Use As Required) | 1 |
| 06***77 | Diffuser | 1 |
| 07***51 | Cap As-Filler Breather | 1 |
1g-7854 Pump Gp-Piston
| 00***83 | Ring-Snap | 1 |
| 1G***54 | Pump Group-Piston | 1 |
| 9T***57 | Pin | 3 |
9t-2031 Rotating Gp-Pump
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 7 |
| 1G***10 | Valve Group-Center; -Manifold | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
102-3689 Tank & Mtg Gp-Hydraulic
| 10***89 | Tank & Mtg Group-Hydraulic | 1 |
| 11***16 | Film-Instruction; (Lift Cylinder) | 2 |
| 13***54 | Valve Group-Pressure Control; (Pressure Reducing) | 1 |
7r-9857 Tank Gp-Hydraulic
| 10***06 | Valve-Directional; (Enclosure Door) | 1 |
| 11***90 | Kit-Bolt; (Pressure Reducing Valve) | 1 |
| 13***70 | Kit-Seal; (Pressure Reducing Valve) | 1 |
1g-9806 Valve & Mtg Gp-Center -Manifold
| 1G***06 | Valve & Mtg Group-Center; -Manifold | 1 |
| 1G***09 | Valve Group-Front; -Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
112-9874 Valve & Mtg Gp-Control
| 11***74 | Valve & Mtg Group-Control | 1 |
| 1G***29 | Valve Group-Solenoid; -Moldboard | 1 |
| 2N***31 | Elbow-Pipe (45 Degree) | 1 |
132-3929 Valve & Mtg Gp-Door
| 13***29 | Valve & Mtg Group-Door | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
1g-9805 Valve & Mtg Gp-Front
| 08***01 | Valve Group-Solenoid | 1 |
| 1G***05 | Valve & Mtg Group-Front | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
1g-7913 Valve & Mtg Gp-Moldboard
| 10***99 | Valve Group | 1 |
| 1G***13 | Valve & Mtg Group-Moldboard | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
1g-9807 Valve & Mtg Gp-Rear
| 10***08 | Valve-Directional; (Auxiliary Cutter) | 1 |
| 10***09 | Kit-Bolt | 2 |
| 10***10 | Valve Group-Relief | 1 |
1g-7927 Valve & Mtg Gp-Solenoid
| 10***31 | Manifold-Inlet | 1 |
| 10***32 | Kit-Seal; (Inlet Manifold Relief Valve) | 1 |
| 10***36 | Cover | 1 |
1g-7999 Valve & Mtg Gp-Thermal Control
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 13***22 | Valve Group-Counterbalance | 1 |
| 13***23 | Valve Group-Counterbalance | 1 |
1g-9810 Valve Gp-Center -Manifold
| 10***09 | Kit-Bolt | 2 |
| 10***23 | Valve-Check | 2 |
| 11***90 | Kit-Bolt; (Pressure Reducing Valve) | 2 |
132-3931 Valve Gp-Control -Counterbalance
| 10***06 | Valve-Directional; (Enclosure Door) | 1 |
| 10***09 | Kit-Bolt | 2 |
| 10***12 | Valve-Relief; (Rear Steering) | 2 |
5e-4755 Valve Gp-Control -Pressure Reducing
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 2S***00 | Dowel | 1 |
| 3E***54 | Ball | 1 |
1g-9809 Valve Gp-Front -Manifold
| 10***78 | Orifice-Plug | 1 |
| 10***80 | Valve As-Relief | 1 |
| 10***81 | Valve As-Pressure Reducing | 1 |
2u-7047 Valve Gp-Pump Control
| 10***83 | Valve Group-Pump Control; (Pressure Compensator) | 1 |
| 10***84 | Valve Group-Flow Control | 1 |
| 10***85 | Coil | 3 |
1g-9811 Valve Gp-Rear -Manifold
| 10***83 | Valve Group-Pump Control; (Pressure Compensator) | 1 |
| 10***84 | Valve Group-Flow Control | 1 |
| 10***85 | Coil | 3 |
087-0201 Valve Gp-Solenoid
| 05***26 | Bolt-Socket Head | 6 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 08***28 | Plate | 2 |
1g-7529 Valve Gp-Solenoid -Moldboard
| 1G***29 | Valve Group-Solenoid; -Moldboard | 1 |
| 7R***09 | Shaft As | 1 |
| 8C***13 | Washer-Hard; (24x41.5x4-mm Thk) | 6 |
Implements
1g-8032 Bearing Gp-Rotor
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 05***26 | Bolt-Socket Head | 6 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
087-0205 Cable Gp-Conveyor
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 05***26 | Bolt-Socket Head | 6 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
1g-7083 Chamber Gp-Rotor
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 33 |
1g-7789 Clutch Gp-Power Take-Off
| 10***99 | Support As | 1 |
| 10***01 | Tube As | 1 |
| 10***04 | Plate | 2 |
1g-9504 Control Gp-Backup
| 10***99 | Support As | 1 |
| 10***01 | Tube As | 1 |
| 10***04 | Plate | 2 |
101-4898 Control Gp-Backup
| 08***10 | Mounting Group-Water Inlet | 1 |
| 08***94 | Mounting Group-Conveyor | 2 |
| 08***29 | Pulley Group-Conveyor | 1 |
109-3946 Control Gp-Backup
| 08***55 | Frame Group | 1 |
| 08***56 | Lighting Group-Flood | 1 |
| 10***00 | Lines Group-Swing Cylinder | 1 |
087-0027 Conveyor Ar-First Stage
| 08***27 | Conveyor Ar-First Stage | 1 |
| 6V***32 | Capscrew, Hex Head (1/2 Nc X 4) | 3 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 3 |
111-9828 Conveyor Ar-First Stage
| 08***81 | Cover As | 1 |
| 11***28 | Conveyor Ar-First Stage | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 26 |
7r-9171 Conveyor Ar-Second Stage
| 5M***62 | Bolt; (3/8-16x0.75-In) | 38 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 38 |
| 7R***79 | Cover As | 2 |
6r-4052 Coupling Gp-Pulley
| 08***81 | Cover As | 1 |
| 11***58 | Cover | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 26 |
111-9830 Cover Gp-Conveyor
| 08***29 | Deflector | 2 |
| 11***30 | Cover Group-Conveyor | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 40 |
087-0032 Cover Gp-Conveyor
| 08***33 | Bolt | 2 |
| 08***12 | Deflector-Rubber; (Inside) | 2 |
| 08***13 | Deflector; (Outside) | 2 |
118-1785 Cover Gp-Conveyor
| 11***59 | Plate | 2 |
| 11***60 | Deflector | 2 |
| 11***02 | Deflector | 2 |
7r-8584 Cover Gp-Conveyor
| 11***92 | Cover As | 1 |
| 11***94 | Cover As | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 38 |
087-0052 Deflector Gp
| 08***52 | Deflector Group | 1 |
| 1G***44 | Planetary Group-Rotor | 1 |
| 7X***31 | Washer-Hard; (31x52.5x6-mm Thk) | 12 |
111-9829 Deflector Gp
| 11***29 | Deflector Group | 1 |
| 12***01 | Drive Group-Rotor | 1 |
| 7X***31 | Washer-Hard; (31x52.5x6-mm Thk) | 12 |
087-0028 Deflector Gp
| 08***95 | Deflector | 2 |
| 08***96 | Deflector | 1 |
| 08***38 | Plate-Wear | 2 |
087-0121 Door Gp-Chamber
| 06***61 | Ring-Retaining | 3 |
| 06***93 | Ring-Retaining | 3 |
| 07***36 | Seal-O-Ring | 1 |
1g-8034 Drive Gp-Rotor
| 11***63 | Tube As | 1 |
| 1G***34 | Drive Group-Rotor | 1 |
| 2W***25 | Cap As-Oil Filler; (Engine) | 1 |
122-5001 Drive Gp-Rotor
| 12***01 | Drive Group-Rotor | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
105-2884 Edge Gp-Cutting
| 10***84 | Edge Group-Cutting | 1 |
| 10***06 | Valve Group-Relief; -Hydraulic Clutch | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
1g-8124 Filler Gp-Hydraulic Oil
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1G***24 | Filler Group-Hydraulic Oil | 1 |
103-6316 Filter & Mtg Gp-Clutch
| 10***16 | Filter & Mtg Group-Clutch | 1 |
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
1g-8125 Filter Gp-Oil
| 08***35 | Guard As | 1 |
| 08***69 | Guard As | 1 |
| 1G***25 | Filter Group-Oil | 1 |
6p-4603 Filter Gp-Oil
| 08***74 | Frame As-Hopper | 1 |
| 1G***74 | Deflector | 1 |
| 1K***72 | Locknut Horn To Guard | 11 |
086-9877 Frame As-Conveyor
| 08***77 | Frame As-Conveyor | 1 |
| 3D***03 | Plug-Pipe; (1/16-27 Nptf Thd) | 1 |
| 8E***78 | Housing | 1 |
087-0047 Guard Gp-Conveyor
| 08***47 | Guard Group-Conveyor | 1 |
| 15***56 | Bearing-Roller | 2 |
087-0202 Hopper Gp
| 08***58 | Idler-Shaft | 2 |
| 08***59 | Shaft-Center | 2 |
| 08***02 | Hopper Group | 1 |
8e-8184 Housing Gp-Clutch
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
| 5P***55 | Capscrew (5/16 - 18 Nc X 2 1/2 Gd5, Hex) | 2 |
| 6V***89 | Nut-Full (5/16 X 18 Thd) | 2 |
087-0031 Idler Gp-Conveyor
| 08***31 | Idler Group-Conveyor | 1 |
| 11***49 | Bearing | 1 |
| 11***50 | Pointer | 1 |
6r-4056 Idler Gp-Conveyor
| 08***37 | Hub | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
| 1F***71 | Bearing-Ball (Note D) | 2 |
087-0053 Idler Gp-Conveyor
| 08***53 | Idler Group-Conveyor | 1 |
| 10***38 | Hose As | 1 |
| 10***68 | Adapter | 1 |
1g-6036 Idler Gp-Conveyor
| 1G***36 | Idler Group-Conveyor | 4 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 12 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 12 |
1g-7795 Idler Gp-Rotor Drive
| 09***46 | Hose Assem. | 1 |
| 10***38 | Hose As | 1 |
| 10***68 | Adapter | 1 |
113-1063 Indicator Gp-Depth
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 08***28 | Plate | 2 |
| 08***34 | Rod | 2 |
116-2573 Lines Gp-Motor
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 3 |
| 08***30 | Pivot As-Upper | 1 |
| 08***41 | Plate | 1 |
119-1227 Lines Gp-Motor
| 08***74 | Link | 2 |
| 11***27 | Lines Group-Motor | 1 |
| 1D***19 | Jam Nut, Hex., 3/4"-10 N.C. | 1 |
087-0120 Moldboard Gp
| 08***30 | Pulley Group-Conveyor | 1 |
| 08***20 | Moldboard Group | 1 |
| 6R***52 | Coupling Group-Pulley | 1 |
086-8894 Mounting Gp-Conveyor
| 06***61 | Ring-Retaining | 3 |
| 06***93 | Ring-Retaining | 3 |
| 07***36 | Seal-O-Ring | 2 |
1g-7939 Mounting Gp-Conveyor
| 1G***39 | Mounting Group-Conveyor | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
| 7R***82 | Tube As | 2 |
6r-4050 Mounting Gp-Coupling
| 12***64 | Bushing | 2 |
| 6R***50 | Mounting Group-Coupling | 1 |
086-8410 Mounting Gp-Water Inlet
| 08***10 | Mounting Group-Water Inlet | 1 |
| 6R***54 | Pulley Group-Conveyor | 1 |
| 7R***69 | Shaft | 1 |
1g-7244 Planetary Gp-Rotor
| 1G***44 | Planetary Group-Rotor | 1 |
| 6R***53 | Pulley | 1 |
| 6V***82 | Nut-Full (3/4-10 Thd) | 4 |
125-2227 Pulley Gp-Conveyor
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 12***27 | Pulley Group-Conveyor | 1 |
| 13***86 | Housing-Pulley | 1 |
125-1009 Pulley Gp-Conveyor
| 08***57 | Plate As | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 12***09 | Pulley Group-Conveyor | 1 |
087-0030 Pulley Gp-Conveyor
| 08***30 | Pulley Group-Conveyor | 1 |
| 12***27 | Pulley Group-Conveyor | 1 |
| 6R***52 | Coupling Group-Pulley | 1 |
087-0048 Pulley Gp-Conveyor
| 08***48 | Pulley Group-Conveyor | 1 |
| 12***62 | Kit-Bushing; (Pulley) | 2 |
| 18***64 | Insert-Rubber | 10 |
087-0485 Pulley Gp-Conveyor
| 08***57 | Plate As | 1 |
| 08***85 | Pulley Group-Conveyor | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
6r-4054 Pulley Gp-Conveyor
| 12***09 | Pulley Group-Conveyor | 1 |
| 6R***54 | Pulley Group-Conveyor | 1 |
| 6V***82 | Nut-Full (3/4-10 Thd) | 4 |
087-0029 Pulley Gp-Conveyor
| 08***29 | Pulley Group-Conveyor | 1 |
| 08***68 | Guard As | 2 |
| 08***05 | Pulley | 1 |
1g-7794 Pulley Gp-Lower
| 1G***94 | Pulley Group-Lower | 1 |
| 1G***12 | Pump Group-Gear; -Clutch | 1 |
| 1G***89 | Coupling | 1 |
1g-7793 Pulley Gp-Upper
| 1G***89 | Clutch Group-Power Take-Off | 1 |
| 1G***90 | Shaft Group-Drive | 1 |
| 1G***92 | Brake Group; -Rotor | 1 |
1g-7934 Pump & Mtg Gp-Clutch
| 1G***34 | Pump & Mtg Group-Clutch | 1 |
| 1G***32 | Bearing Group-Rotor | 1 |
| 1G***33 | Rotor Group | 1 |
7r-7643 Rotor Ar
| 13***57 | Rotor Group | 1 |
| 1G***32 | Bearing Group-Rotor | 1 |
| 1G***34 | Drive Group-Rotor | 1 |
7r-8702 Rotor Drive Ar
| 1G***04 | Rotor As | 1 |
| 7R***02 | Rotor Drive Ar | 1 |
| 8E***87 | Bit As-Cutting | 161 |
1g-7940 Rotor Gp
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 1G***91 | Guard Group-Drive Shaft | 1 |
| 1G***40 | Rotor Group | 1 |
1g-8033 Rotor Gp
| 10***00 | Washer; (19.8x42x10-mm Thk) | 2 |
| 10***17 | Bolt-Flat Head; (3/4-10x1-3/4-In) | 2 |
| 11***25 | Plate | 1 |
130-0057 Rotor Gp
| 13***57 | Rotor Group | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 9C***32 | Yoke | 1 |
1g-7790 Shaft Gp-Drive
| 1G***90 | Shaft Group-Drive | 1 |
| 4J***40 | Seal-O-Ring (Id=18.64mm) | 2 |
| 6Y***52 | Valve Group-Clutch | 1 |
114-9257 Shield Gp
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 3 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 11***57 | Shield Group | 1 |
9c-3530 Universal Joint Gp
| 10***12 | Valve-Relief; (Rear Steering) | 1 |
| 10***13 | Valve-Relief; (Rear Steering) | 1 |
| 9C***30 | Universal Joint Group | 1 |
1g-7935 Valve & Mtg Gp-Clutch
| 1G***35 | Valve & Mtg Group-Clutch | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
6y-9852 Valve Gp-Clutch
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 5J***81 | Spacer | 1 |
109-5206 Valve Gp-Relief -Hydraulic Clutch
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 10***11 | Plate | 2 |
| 10***22 | Bracket As | 1 |
6e-6178 Valve Gp-Relief
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***91 | Valve Kit; (Tc Lockup Clutch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
1g-9812 Valve Gp-Relief -Hydraulic Steering
| 16***91 | Valve Kit; (Tc Lockup Clutch) | 1 |
| 1G***12 | Valve Group-Relief; -Hydraulic Steering | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
6t-9290 Valve Gp-Solenoid
| 00***40 | Connector; (Flared) | 1 |
| 00***54 | Nipple-Pipe | 2 |
| 03***85 | Elbow | 1 |
214-4040 Valve Gp-Solenoid -Tc Lockup Clutch
| 00***40 | Connector; (Flared) | 1 |
| 03***85 | Elbow | 1 |
| 08***82 | Nipple-Reducer | 1 |
Lubrication System
2n-8220 Breather Gp -Crankcase
| 2N***09 | Clamp; (V-Band) | 1 |
| 2N***20 | Breather Group; Breather Gp-Crankcase | 1 |
| 4F***90 | Seal (2.10" Inside Diameter) | 1 |
9y-2989 Breather Gp
| 2N***09 | Clamp; (V-Band) | 1 |
| 4F***90 | Seal (2.10" Inside Diameter) | 1 |
| 4N***68 | Breather As; (Crankcase) | 1 |
4n-2481 Fastener Gp-Oil Pump Mounting -Engine
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 4N***81 | Fastener Group-Oil Pump Mounting; Oil Pump Mounting Fastener Group | 1 |
2w-6537 Filler Gp-Engine Oil
| 12***97 | Tube As | 1 |
| 2N***09 | Clamp; (V-Band) | 1 |
| 2W***37 | Filler Group-Oil | 1 |
9y-1911 Filter Gp-Engine Oil
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 5 |
| 1P***67 | Plunger; (Engine Oil Cooler Relief Valve) | 1 |
| 1R***08 | Filter As-Engine Oil; (Advanced Efficiency)(High Efficiency) | 2 |
1g-8628 Fumes Disposal Gp
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 1G***28 | Fumes Disposal Group | 1 |
| 1G***05 | Tube | 1 |
7e-3092 Gauge Gp-Oil Level (Dipstick) -Lh Rear
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
1w-4991 Lines Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
4n-2342 Lines Gp-Turbocharger Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
4n-8734 Pump Gp-Engine Oil
| 1M***44 | Bolt; (3/8-16x2-1/4 In) | 2 |
| 1W***38 | Shaft As-Pump Drive; (8-Teeth) | 1 |
| 1W***39 | Shaft As-Idler; (8-Teeth) | 1 |
Operator Station
1g-7781 Console Gp-Operator
| 09***51 | Bearing-Sleeve | 2 |
| 0L***70 | Handle-Lever | 2 |
| 1G***81 | Console Group-Operator | 1 |
121-0064 Console Gp-Operator
| 10***73 | Door As | 1 |
| 12***64 | Console Group-Operator | 1 |
| 1G***40 | Door As | 1 |
1g-7784 Control Gp-Speed
| 11***24 | Guard As | 1 |
| 1G***84 | Control Group-Speed | 1 |
| 3B***15 | Pin,Cotter Governor And Decelerator Control | 2 |
1g-7782 Door Gp-Console
| 1G***82 | Door Group-Console | 1 |
| 5P***57 | Sleeve (Not Shown) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
117-8323 Guard Gp-Controls
| 03***17 | Screw-Button Head; (3/8-16x1-In) | 8 |
| 08***49 | Cable As | 1 |
| 11***23 | Guard Group-Controls | 1 |
1g-7786 Guard Gp-Controls
| 03***17 | Screw-Button Head; (3/8-16x1-In) | 6 |
| 08***49 | Cable As | 1 |
| 10***17 | Tape; (5.5m) | 0 |
1g-7787 Literature Gp
| 03***17 | Screw-Button Head; (3/8-16x1-In) | 4 |
| 12***74 | Floor As | 1 |
| 1G***87 | Literature Group | 1 |
122-7307 Panel Gp-Instrument
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***01 | Film-Warning | 4 |
| 10***06 | Film-Warning | 2 |
1g-7783 Panel Gp-Instrument
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***29 | Film-Warning; (Support Legs, Read Omm) | 4 |
| 08***30 | Film-Warning; (Door) | 2 |
1g-7779 Platform Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***03 | Film-Warning | 4 |
| 10***07 | Film-Warning | 2 |
Power Train
4n-2190 Cooler Gp-Transmission Oil
| 08***65 | Motor Group-Hydraulic | 1 |
| 1G***54 | Seal-O-Ring | 1 |
| 4N***90 | Cooler Group-Transmission Oil | 1 |
1g-7800 Lines Gp-Hydrostatic
| 10***20 | Sensor Group-Speed; -Propel | 1 |
| 1G***13 | Motor Group-Hydraulic | 1 |
| 1G***00 | Lines Group-Hydrostatic | 1 |
1g-7798 Motor & Mtg Gp-Propel
| 07***64 | Seal-O-Ring | 1 |
| 07***90 | Ring-Retaining | 1 |
| 11***62 | Spacer-Thrust | 1 |
1g-7797 Motor & Mtg Gp-Propel
| 07***64 | Seal-O-Ring | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 10 |
| 11***06 | Kit-Brake Lining | 1 |
114-0893 Planetary Gp-Final Drive
| 11***93 | Planetary Group-Final Drive | 1 |
| 1B***67 | Bolt, Hex. Hd., 5/8"-11 N.C. X 3" | 2 |
| 5P***47 | Washer (Bracket To Valve Support) | 2 |
087-0038 Planetary Gp-Final Drive
| 08***38 | Planetary Group-Final Drive | 1 |
| 1G***08 | Valve-Flushing | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 2 |
1g-7796 Pump & Mtg Gp-Propel
| 11***20 | Plate | 1 |
| 1G***96 | Pump & Mtg Group-Propel | 1 |
| 4M***61 | Bolt-To Assemble Valve As And Plates | 3 |
1g-7801 Valve & Mtg Gp-Flushing
| 1G***01 | Valve & Mtg Group-Flushing | 1 |
| 1G***80 | Cover As | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 23 |
Service Equipment And Supplies
111-3437 Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***04 | Film-Warning | 4 |
| 10***08 | Film-Warning | 2 |
111-3438 Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***05 | Film-Warning | 4 |
| 10***09 | Film-Warning | 2 |
111-3440 Film Gp
| 10***98 | Film-Pm-565 | 2 |
| 10***56 | Film-Instruction; (Transmission Fluid) | 1 |
| 10***49 | Film-Instruction | 1 |
111-3441 Film Gp
| 11***41 | Film Group | 1 |
| 5P***98 | Coupling, Straight, 1/4in. N.P.T. | 1 |
| 5R***61 | Fitting As | 1 |
111-3439 Film Gp
| 08***96 | Decal-Water | 2 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***26 | Decal-Warning Belt; (Moving Belt) | 6 |
6r-4180 Plate & Film Gp
| 10***41 | Hose As | 2 |
| 10***95 | Hammer-Hydraulic | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
111-3436 Plate & Film Gp
| 11***36 | Plate & Film Group | 1 |
| 1C***09 | Rod End | 1 |
| 1C***10 | Shoe | 1 |
102-2996 Service Gp-Cutter Bit
| 10***96 | Service Group-Cutter Bit | 1 |
7x-3667 Service Gp-Cutter Bit
| 08***62 | Extension Bar 9/16 Hex | 1 |
| 10***96 | Service Group-Cutter Bit | 1 |
| 10***18 | Lamp Group-Service | 1 |
1c-4569 Shipping Gp-Conveyor
| 1C***69 | Shipping Group-Conveyor | 1 |
1g-7788 Tool Gp
| 1G***88 | Tool Group | 1 |
Steering System
1g-7785 Control Gp-Steering
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 10***98 | Kit-Seal; (Steering Cylinder) | 1 |
| 10***91 | Cover As | 1 |
1g-9332 Control Gp-Steering
| 1G***32 | Control Group-Steering | 1 |
| 5E***28 | Washer-Thrust | 2 |
| 5K***23 | Bearing-Sleeve | 4 |
1g-7902 Cylinder & Mtg Gp-Steering
| 10***57 | Cylinder & Mtg Group-Steering | 1 |
| 1G***99 | Valve & Mtg Group-Steering | 2 |
| 1G***00 | Valve & Mtg Group-Relief | 1 |
104-1757 Cylinder & Mtg Gp-Steering
| 10***57 | Cylinder & Mtg Group-Steering | 1 |
| 11***95 | Guide As | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
087-0500 Hinge Gp-Steering
| 08***00 | Hinge Group-Steering | 1 |
| 10***74 | Hose As | 1 |
| 10***83 | Hose As | 1 |
1g-7881 Hydraulic Ar-Steering
| 10***74 | Hose As | 1 |
| 10***83 | Hose As | 1 |
| 10***84 | Hose As | 1 |
111-3196 Indicator Gp-Steering
| 10***74 | Hose As | 1 |
| 10***83 | Hose As | 1 |
| 10***84 | Hose As | 1 |
1g-7901 Lines Gp-Steering
| 05***12 | Ring-Retaining; (Internal) | 1 |
| 1G***01 | Lines Group-Steering | 1 |
| 3D***92 | Packing,Preformed Bushing Part Of Kit P/N 5r***25 | 1 |
1g-7778 Link Gp-Steering
| 1G***78 | Link Group-Steering | 1 |
| 1G***12 | Valve Group-Relief; -Hydraulic Steering | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
1g-8599 Pump Gp-Metering -Steering
| 1G***99 | Pump Group-Metering; -Steering | 2 |
1g-7776 Steering Gp-Mechanical
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
| 07***12 | Fitting-Breather | 1 |
1g-7900 Valve & Mtg Gp-Relief
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 13***80 | Pin As | 2 |
| 1G***00 | Valve & Mtg Group-Relief | 1 |
1g-7899 Valve & Mtg Gp-Steering
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 13***34 | Cylinder Group-Hydraulic; -Front Door | 2 |
| 1G***99 | Valve & Mtg Group-Steering | 1 |
Water System
119-4260 Lines Gp-Water Filter
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
116-2468 Lines Gp-Water Filter
| 11***68 | Lines Group-Water Filter | 1 |
| 4S***99 | Str. Connector, 1/4in. J.I.C. X 1/4in. N.P.T. | 4 |
| 5R***61 | Fitting As | 1 |
1g-8385 Lines Gp-Water Spray
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
8c-1679 Lines Gp-Water Spray
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
112-3135 Pump & Lines Gp-Water Spray
| 00***99 | Tee To Bushing | 1 |
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
119-1147 Pump & Lines Gp-Water Spray
| 09***99 | Key-Square | 1 |
| 10***65 | Kit-Valve; (Water Spray Pump) | 1 |
| 10***67 | Kit-Plunger; (Water Spray Pump) | 3 |
112-3134 Pump & Motor Gp-Water Spray
| 11***34 | Pump & Motor Group-Water Spray | 1 |
| 11***33 | Pump Group-Water Spray | 1 |
| 3B***67 | Cock- Drain -To Cover | 1 |
132-4861 Pump & Motor Gp-Water Spray
| 07***01 | Volute | 1 |
| 07***01 | Frame | 1 |
| 07***09 | Slinger | 1 |
200-6366 Pump Gp-Water Spray
| 11***35 | Pump & Lines Group-Water Spray | 1 |
| 11***31 | Pump Group-Water Spray | 1 |
| 11***65 | Valve Group-Manual | 1 |
115-4333 Pump Gp-Water Spray
| 11***35 | Pump & Lines Group-Water Spray | 1 |
| 11***31 | Pump Group-Water Spray | 1 |
| 11***32 | Lines Group-Water | 1 |
115-4331 Pump Gp-Water Spray
| 09***99 | Key-Square | 1 |
| 10***65 | Kit-Valve; (Water Spray Pump) | 1 |
| 10***67 | Kit-Plunger; (Water Spray Pump) | 3 |
204-3393 Pump Gp-Water Spray
| 11***47 | Pump & Lines Group-Water Spray | 1 |
| 11***48 | Lines Group-Hydraulic; -Water Spray Pump | 1 |
| 20***93 | Pump Group-Water Spray | 1 |
1g-9996 Pump Gp-Water Spray
| 09***99 | Key-Square | 1 |
| 10***65 | Kit-Valve; (Water Spray Pump) | 1 |
| 10***67 | Kit-Plunger; (Water Spray Pump) | 3 |
116-2466 Spray Ar-Water
| 00***98 | Elbow (For Use With Deep Pan) | 1 |
| 00***15 | Insert | 4 |
| 11***66 | Spray Ar-Water | 1 |
119-1043 Spray Ar-Water
| 00***15 | Insert | 4 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
| 08***65 | Seal | 2 |
115-4330 Spray Ar-Water
| 00***46 | Elbow; (45 Degree Pipe) | 2 |
| 00***50 | Adapter-Pipe | 3 |
| 05***26 | Tee | 1 |
1g-8276 Spray Gp-Water
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 1G***76 | Spray Group-Water | 1 |
115-9966 Spray Gp-Water -Mixing Chamber
| 01***24 | Bushing To Supply Port | 1 |
| 01***40 | Bushing-Pipe | 2 |
| 03***46 | Elbow | 1 |
1g-8272 Spray Gp-Water -Conveyor
| 11***17 | Gasket | 1 |
| 11***18 | Screen | 1 |
| 1G***72 | Spray Group-Water; -Conveyor | 1 |
1g-7941 Spray Gp-Water
| 08***63 | Cap | 12 |
| 08***65 | Seal | 12 |
| 11***69 | Connector-Male | 5 |
114-2554 Strainer Gp-Water
| 11***54 | Strainer Group-Water | 1 |
| 1G***82 | Door Group-Console | 1 |
| 1G***83 | Panel Group-Instrument | 1 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 11***74 | Console As | 1 |
| 12***42 | Door As | 1 |
115-9965 Valve Gp-Manual
| 11***65 | Valve Group-Manual | 1 |
| 11***74 | Console As | 1 |
| 12***42 | Door As | 1 |
PM-565 serial number reference
On the PM-565/PM-565B, the serial plate is mounted on the main frame, generally on the left side near the engine enclosure and operator platform — check the frame rail near the cab steps if it is not immediately visible. The full serial number reads as an 8-character code: the first 3 characters are the prefix (3TK for the base PM-565, 8GS for the PM-565B) tying the machine to its build series and engine arrangement, and the remaining 5 digits are the sequential unit number within that prefix. If the plate is missing or worn, or the engine fitted does not match what's expected for the prefix, confirm the exact configuration with your Cat dealer using the full PIN.
| Prefix | Identifies | Notes |
|---|---|---|
| 3TK | Base PM-565 (first generation) | Covers the original PM-565 cold planer. Two sub-ranges exist (early production and a later running change) but both are fitted with the Cat 3408 diesel engine — the base mechanical version, not the later HEUI 3408C/3408E fitted to the PM-565B. Parts manuals, wiring schematics, and the factory parts catalog for this range are indexed against this prefix. |
| 8GS | PM-565B (second generation) | Covers the PM-565B, the wider/updated cold planer that followed the base PM-565. The factory parts catalog ties this serial range to the 3408C engine. Some dealer spec sheets instead list a 3408E HEUI diesel rated around 466 kW (625 hp) gross for the PM-565B — engine fitment varies by configuration/production point within the range, so confirm the actual engine arrangement against the machine's own PIN rather than assuming one or the other. |
Frequently asked questions
What engine does the Caterpillar PM-565 cold planer use?
It depends on series and configuration. The base PM-565 (serial prefix 3TK) uses a mechanical, non-HEUI Cat 3408 V8 with no electronic engine controls. The later PM-565B (serial prefix 8GS) uses a turbocharged Cat 3408-family V8 -- some units carry the mechanical 3408C, others the HEUI-equipped 3408E/3408ETA rated at roughly 466 kW (625 hp) at 2100 rpm, displacing 18.0 L. Confirm the exact engine against the unit’s own engine tag.
What is the operating weight of the Caterpillar PM-565?
Operating weight runs roughly 83,800-85,100 lb (38,000-38,600 kg) depending on configuration and series, split across front and rear track pairs (roughly 45,100 lb front and 40,000 lb rear on documented configurations). Exact figures vary by model year and options, so confirm against the machine's own spec plate.
What replaced the Caterpillar PM-565?
No confirmed direct successor model has been documented for the PM-565 or PM-565B. Caterpillar's later half-lane cold planers, such as the C18-powered PM620/PM622 generation, are a separate and much newer engine/chassis platform rather than a documented replacement line, so treat any successor claim for this model with caution until verified against factory literature.
What PM-565 owners discuss
What's the practical difference operators notice between the base PM-565 and the PM-565B on start-up and daily running?
The base PM-565 runs a mechanical, non-HEUI 3408 V8 — no electronic fuel controls, so cold starts and troubleshooting are straightforward and mostly a matter of reading fuel, air, and oil-pressure gauges. The PM-565B swaps in the electronically controlled 3408E/3408ETA with HEUI injection. That engine starts and idles fine when healthy, but owners note it can crank slow to fire after sitting a week or two in cool weather — HEUI injectors trap oil behind a check valve in the return line, and pressure has to rebuild in the high-pressure oil rail before the injectors work. A pre-lube pump or an extra few seconds of cranking usually clears it; if hard starting persists, suspect a weak HEUI pump or a leaking injector and have a dealer confirm.
What wears fastest on the track undercarriage of a machine this size?
Same wear items as any dozer-class undercarriage: track pads, chains, rollers, idlers, and sprockets. A cold planer this heavy runs on three or four track modules carrying a lot of weight over rough milled surfaces, so pad and chain wear shows up steadily with hours. The automatic track-tensioning system fitted to these machines is largely maintenance-free day to day, but it doesn't stop wear, it just keeps tension consistent so pins and bushings don't gallop prematurely. Daily washdown of milled material packed around rollers and sprockets is what actually extends undercarriage life — let debris cake on and bearings run hot and can seize.
The cutting teeth and drum seem to wear out fast — is that normal?
Yes, that's expected consumable wear, not a machine fault. A milling drum's realistic working life is commonly cited around 3,000 hours before it needs attention, though that swings a lot with rock content, mix hardness, and how aggressively it's run. Teeth wear even faster and need routine inspection for spacing, seating, and hard-facing loss. Adequate water spray at the drum is the biggest lever an operator has — it cools the teeth and knocks down dust, and running with plugged nozzles or a weak strainer accelerates tooth wear and heat-cracking. Clogged spray nozzles from mineral scale or debris are a recurring complaint; cleaning or replacing the inline strainer is cheap insurance against it.
Are there known engine quirks specific to the 3408 / 3408E family worth watching for?
The mechanical 3408 has a strong reputation for durability — properly maintained units are reported running well past 16,000 hours, sometimes decades in service, since there's no electronics in the fuel path to fail. Common complaints across the 3408 family generally, mechanical and electronic alike, include cracked cylinder heads from age or overheating, camshaft wear from marginal lubrication showing up as rough running, and blow-by under sustained heavy load. On the electronic 3408E/3408ETA specifically, low or intermittent high-pressure (HEUI) oil readings are the recurring diagnostic headache — cranking pressure should hold a steady multi-thousand-psi reading, and if it sags, check for a leaking injector O-ring or spill port and a tired HEUI pump before condemning any single component. Any persistent oil-pressure or HEUI-pressure fault should be pressure-tested and confirmed by a dealer before major parts are swapped — have your dealer verify before committing to a pump or injector replacement.
What electrical or sensor issues come up most with these machines?
Grade and slope sensors — contacting ski/side-plate sensors and non-contacting sonic sensors — are the electrical components operators deal with most day to day, and like any sonic sensor they're sensitive to dust and mist buildup on the sensing face, which shows up as erratic grade readings rather than a wiring fault. On the -B's electronic engine, the injection actuation pressure sensor and its harness are a common suspect when the ECM logs a HEUI pressure fault with no obvious mechanical cause; cleaning connectors and checking for chafed wiring near the engine deck resolves a fair share of these before any sensor or pump gets replaced.
The primary or discharge conveyor keeps running off-center — what usually causes that?
Belt mistracking on a cold planer's conveyor is almost always mechanical, not electrical: misaligned or worn rollers, uneven tension, or milled material and moisture packed onto pulleys and idlers throwing the belt off-center. Daily washdown of the conveyor structure keeps rollers running true and prevents the buildup that causes both mistracking and premature bearing wear. If mistracking continues after a cleanout and a basic tension check, look for a bent frame member or worn pulley lagging rather than chasing it as an adjustment problem.
What should I check before buying a used PM-565 or PM-565B?
First confirm which generation it actually is — serial prefix and engine tag tell you whether it's the mechanical-injection base PM-565 or the HEUI-equipped PM-565B, since fuel system, parts, and diagnostics differ completely between them. Beyond that, walk it like any cold planer: measure remaining drum and tooth wear against new, check the water-spray system for plugged nozzles and strainer condition, inspect track pads, rollers, and idlers for wear and confirm the auto-tensioning system is holding, and look over conveyor belts and rollers for cracking or packed-on debris. Ask for service records — oil-sample trends and any injector or HEUI pump replacement history matter more than the hour meter on an engine this size. On a -B, have the dealer run a HEUI pump dead-head pressure test and verify cranking oil pressure before you commit; a soft pump or leaking injector is expensive to sort out after the sale, so have your dealer verify it under proper test conditions rather than judging it from a walk-around.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PM-565 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.