Caterpillarcold planer(no series)
Caterpillar PM-201
Maintenance schedule, common problems & OEM parts breakdown
The Cat PM-201 is a half-lane track cold planer built for full-depth, single-pass milling of asphalt and concrete pavement. It runs a Cat C18 ACERT diesel rated at 625 hp net (650 hp gross), driving a rotor through a wet clutch with automatic belt tension control. Operating weight runs in the 86,000 lb (39,000 kg) class, with the exact figure shifting by rotor and tooling choice; front and rear track loading splits roughly 47,500 lb (21,545 kg) front and 38,860 lb (17,627 kg) rear. Cutting width sits at 2.1 m (83 in) with a maximum depth of 305 mm (12 in). The PM-201 rode on a four-track undercarriage with multiple steering modes for tight maneuvering, and it was offered with a choice of conical quick-release, breakaway, or weld-on tool-holder rotors to match different production and depth demands. It shares its chassis and driveline lineage closely with the PM-200, produced on the same C18 half-lane platform, and its own build run fell in the roughly 2017-2019 window before Cat's half-lane cold planer line moved on to later generations.
Against the PM-200, the PM-201 tightened up service access and added the quick-release conical tool-holder option, plus refinements to the load-sensing propel hydraulics and clutch tensioning that cut daily setup time on the rotor. No single named model is clearly documented as its direct one-for-one replacement; Cat's later half-lane cold planer generations carried the class forward from there. Because the PM-201 had a short build window, used populations are smaller than the PM-200's, but the shared C18 engine, wet-clutch driveline, and track undercarriage architecture across that generation of Cat cold planers keeps parts interchange and dealer support strong. That makes the PM-201 a practical buy in the used market for contractors who want a proven half-lane C18 milling machine without chasing a rarer standalone parts book.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar PM-201 specifications
Engine
| Engine model | Cat C18 with ACERT (single documented generation, 2017-2019 production) |
| Gross power | 485 kW (650 hp) @ 2100 rpm |
| Net power | 466 kW (625 hp) @ 2100 rpm |
| Displacement | 18.1 L (1,105 cu in) |
| Cylinders | 6, inline (standard Cat C18 architecture) |
| Emissions certification | U.S. EPA Tier 3 / EU Stage IIIA |
Weights
| Operating weight, conical rotor | 39,165 kg (86,360 lb) |
| Operating weight, breakaway rotor | 38,145 kg (84,105 lb) |
| Operating weight, weld-on rotor | 38,050 kg (83,905 lb) |
| Shipping weight (empty) | approx. 34,900 kg (76,950 lb); one source cites approx. 30,845 kg (68,000 lb) - varies by configuration/source |
| Front track load, full water (conical rotor) | 21,550 kg (47,500 lb) |
| Rear track load, full water (conical rotor) | 17,625 kg (38,860 lb) |
Dimensions
| Operating length | 15.10-15.12 m (49.55-49.6 ft) |
| Operating width | 2.80 m (9.17-9.2 ft) |
| Maximum operating height | 5.04-5.06 m (16.54-16.6 ft) |
| Minimum operating height | 3.22 m (10.58 ft) |
| Shipping length, base machine | 8.23 m (27 ft) |
| Shipping length, conveyor lowered | 15.70 m (51.5 ft) |
| Shipping width | 2.57 m (8.42 ft) |
| Shipping height | 2.97-3.22 m (9.75-10.57 ft), varies by source |
| Track shoe dimensions (each) | 2.07 m long x 350 mm wide (6.8 ft x 13.8 in) |
| Rotor (cutting) width | 2,100 mm (83 in / 6.9 ft) |
| Rotor diameter | 1,168 mm (46 in) |
| Inside turning radius | 4.7 m (15.4 ft) |
Performance
| Travel speed | 6.0 km/h (3.7 mph) |
| Working (milling) speed | 40 m/min (132 ft/min) |
| Maximum cutting depth | 305 mm (12-12.1 in) |
| Cutting width | 2,100 mm (83 in / 6.9 ft) |
| Collecting conveyor speed | 189 m/min (620 ft/min) |
| Discharge conveyor speed | 232 m/min (760 ft/min), swings 45 degrees |
Service capacities (summary)
| Fuel tank | 946 L (250 gal) |
| Hydraulic system | 681 L (180 gal) |
| Engine oil | 64 L (17 gal) |
| Cooling system | 79 L (21 gal) |
| Water spray tank | 3,785 L (1,000 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PM-201 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - C18 ACERT diesel | 64.4 L (17.0 US gal) | Cat DEO or Cat DEO-ULS diesel engine oil (DEO-ULS required on aftertreatment-equipped units). SAE 15W-40 above -18°C (0°F); SAE 10W-30 for a wider ambient band down to -20°C; Cat DEO-ULS Cold Weather (synthetic 0W-40) for sustained temperatures below -20°C (-4°F). |
| Cooling system | 79.5 L (21.0 US gal) | Cat ELC (Extended Life Coolant/Antifreeze), premixed 50/50 ethylene-glycol formula; protects to roughly -37°C (-34°F). Do not mix with conventional (non-ELC) coolant; top off only with the same ELC product. |
| Fuel tank | 946 L (250 US gal) | Ultra-low-sulfur No. 2-D diesel fuel (ULSD, max 15 ppm sulfur US / 10 ppm EU), required for the ACERT engine's aftertreatment system. Winter-blend or treated fuel recommended below -7°C (20°F) to prevent gelling. |
| Hydraulic system (tank and circuit, including propel/track-drive motors) | 681 L (180 US gal) | Cat HYDO Advanced 10 hydraulic oil, SAE 10W grade, rated for -20°C to 40°C (-4°F to 104°F) ambient; supports extended (up to 6,000-hour) drain intervals when monitored with Cat S·O·S oil analysis. Track/propel drive motors run off this same circuit; no separate final-drive gear-oil sump is published for this machine class. |
| Water spray / dust-suppression system | 3,785 L (1,000 US gal) | Clean water only (not an oil-lubricated circuit); add a freeze-point additive or drain fully in sub-freezing conditions to prevent line and pump damage. |
| Grease points (rotor housing/bearing seals, conveyor pivots, track and idler pins) | Per fitting - no bulk reservoir capacity specified | Cat MPGM (Multipurpose Grease), NLGI 2 lithium-complex grease for normal ambient service; Cat Arctic Platinum Grease recommended for sustained ambient below -20°C (-4°F). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar PM-201 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PM-201 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on C18 engine oil, hydraulic oil from the load-sensing propel circuit, and track final drive gearbox oil to catch clutch or bearing wear before failure. Track coolant condition on the C18 to protect against liner pitting. Watch the wet clutch and rotor drive belt through inspection covers for early glazing or slip, and log rotor bearing temperature trends where a monitoring kit is installed.
Corrective & Common Repairs
Most field repairs center on the rotor: swap worn conical, breakaway, or weld-on tool holders and cutting tools as production drops off. Re-tension or replace the rotor drive belt and wet clutch components when slip shows up under load. Clear and re-tension the conveyor belt when milled material backs up, and clean or replace clogged water spray nozzles in the dust-suppression circuit. Track pad and D4 rail wear on the four-track undercarriage is routine after heavy milling hours.
Overhaul & Rebuild Points
Rotor housing bearings, seals, and side plates take the brunt of milling loads and are the core rebuild point on a high-hour PM-201. Wet clutch packs need rebuilding once wear indicators run out. The C18 ACERT's turbocharger and fuel injectors are the major engine-side overhaul items, generally driven by oil analysis and blow-by trends rather than a fixed hour count. Track roller frames, sprockets, and idlers across all four undercarriages typically get overhauled or exchanged as a set.
Seasonal & Environment Servicing
Before cold-weather work, service the C18's starting aids and switch to a winter-grade fuel and hydraulic oil viscosity for the load-sensing propel system. Drain or protect the water spray/dust-suppression tank and lines from freeze damage between shifts. In hot, abrasive milling conditions, step up track undercarriage cleaning to keep packed asphalt fines off pads and sprockets, and check spray nozzles more often since heat accelerates scale buildup in the cooling circuit.
PM-201 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1642 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 126-5802 | Filter As-Compressed Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PM-201 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-3 / 100-4 | Engine oil pressure sensor circuit reading voltage above normal (100-3) or below normal (100-4), separate from an actual low-pressure event. | Open or shorted sensor wiring, corroded connector, or a failed oil pressure sensor on the C18 ACERT engine. | Check the sensor connector and harness for corrosion or damage before replacing the sensor; confirm with the service tool that the fault is a sensor-circuit code and not a genuine low-pressure event. |
| 110-3 / 110-4 | Engine coolant temperature sensor circuit voltage above normal (110-3) or below normal (110-4). | Damaged sensor wiring, poor ground, or a failed coolant temperature sensor. | Inspect wiring and connector pins first, then verify sensor resistance against spec before replacing the sensor. |
| E360 | Low engine oil pressure event. Level 1 logs a warning only, level 2 derates engine power, level 3 can shut the engine down. | Low oil level, plugged oil filter, worn oil pump, or a failing pressure sensor at high engine hours. | Shut down and check oil level and filter condition immediately; do not continue operating past a level-2 or level-3 event until oil pressure is verified with a mechanical gauge. |
| E361 | High engine coolant temperature event. Level 1 is a warning, level 2 derates power, level 3 can shut the engine down. Trip point is roughly 113 C (235 F), varies by engine rating. | Low coolant level, plugged or damaged radiator, failed fan drive, or a collapsed hose restricting flow. | Stop the machine, let it cool, check coolant level and radiator core for debris or damage, and inspect the fan drive before restarting. |
| 168-3 / 168-4 | Battery or electrical system supply voltage above normal (168-3) or below normal (168-4). | Weak or failing battery, loose or corroded battery cable connections, or a charging system fault. | Load-test the batteries, clean and tighten all battery connections, and check alternator output before condemning the ECM. |
| 190-8 | Engine speed signal is abnormal in frequency, pulse width, or period, meaning the ECM cannot get a reliable speed reading. | Damaged speed/timing sensor, worn tone wheel, or wiring fault between the sensor and ECM. | Check the sensor air gap and wiring first, then test the sensor itself against spec. |
| 651-5 / 651-6 (and equivalent codes for other cylinders) | Fuel injector solenoid circuit current below normal (-5) or above normal (-6) for the numbered cylinder on the C18 ACERT engine. | Damaged injector wiring harness, failed injector solenoid, or a loose harness connector at the valve cover. | Check harness continuity and connector condition for the affected cylinder before replacing the injector. |
| 757 | Rotor clutch oil pressure sensor (PWM) circuit fault on the rotor drive system. | Damaged sensor wiring or a failed rotor clutch pressure sensor; can also reflect a genuine low clutch pressure condition if paired with an abnormal-reading FMI. | Verify wiring and connector condition, then check actual clutch oil pressure with a gauge before replacing the sensor. |
| 758 | Propel system oil pressure sensor (PWM) circuit fault. | Damaged sensor wiring or a failed propel pressure sensor, or an actual low propel-circuit pressure condition. | Check wiring and connector first, then verify propel hydraulic pressure with a gauge before replacing the sensor. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PM-201 attachments & work tools
Rotor / cutting-tool systems
Factory offers three rotor builds for the 2100 mm (83 in) drum: a quick-release conical tool-holder rotor, a breakaway tool-holder rotor for weld-free bit-holder replacement, and a triple-wrap weld-on holder rotor aimed at higher milling speeds. Point-attack carbide tool count and spacing vary by rotor build; treat exact bit count and spacing as configuration-dependent rather than a fixed figure.
Tool holder hardware
Standard tools mount in drive-in, knock-out holder blocks for fast field replacement. The quick-release conical holder uses a tapered fit that self-tightens in the base block, letting crews swap worn bits without full holder removal.
Milling width and depth class
This is the 2.1 m (83 in) half-lane class cold planer, with maximum cutting depth around 305 mm (12 in). Class positions it as a heavy-production highway/street milling machine rather than a compact attachment tool.
Moldboard / side-plate options
A windrow-style moldboard option is documented for the closely related PM200 platform; treat availability on the PM201 as likely shared but unconfirmed for this exact model - verify with dealer before ordering.
Water spray and dust control
Standard water spray system lubricates cutting tools and suppresses dust on the collecting conveyor. Onboard tank capacity is about 3,787 L (1,000 US gal), sized to the machine's production rate rather than sold as a separate kit.
Conveyor arrangement
Two-conveyor layout: a collecting (primary) conveyor around 1,020 mm (40 in) wide feeding a discharge conveyor about 915 mm (36 in) wide. Discharge conveyor has variable speed and roughly 45-degree swing for loading trucks from either side.
Grade and slope control
Automatic grade/slope control is a core factory system with a choice of sensor types: contact wire-rope sensors or non-contact sonic averaging sensors (multi-sensor array). Quoted accuracy is about plus or minus 3 mm (1/8 in); sensor choice is selected per job rather than being a bolt-on attachment.
Undercarriage and steering configuration
Machine runs on a track undercarriage (rail lineage shared with Cat D-series track-type tractor components) rather than wheels, with multiple steering modes for maneuvering in tight milling passes. This is a fixed machine configuration, not a swappable work tool.
Operator station and guarding
Operator platform is isolated on rubber mounts for vibration control, with ground-level control stations on both sides carrying warning horns and emergency shutdown buttons - standard guarding for this machine class rather than an optional attachment.
All PM-201 assemblies by section
Every catalogued assembly group for the Caterpillar PM-201. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
246-4681 Air Cleaner Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 19***04 | Tube | 1 |
| 1W***94 | Clamp As | 1 |
135-5285 Air Cleaner Gp
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 12 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 12 |
| 13***59 | Manifold-Exhaust; (End) | 2 |
109-4202 Elbow Gp-Air Inlet
| 10***02 | Elbow Group-Air Inlet | 1 |
| 11***87 | Bolt; (M6x0.04x10.4-mm)(6mm X 0.04 Thd) | 1 |
| 16***58 | Clip-Hose | 1 |
161-1052 Lines Gp-Air -Turbocharger Outlet
| 16***52 | Lines Group-Air; -Turbocharger Outlet | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 27***20 | Bowl As; (Fuel, Water Separator) | 1 |
247-4472 Lines Gp-Air
| 12***57 | Base As-Filter; (Primary Fuel Filter) | 1 |
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 17***18 | Filter Group-Water Sep & Fuel; -Primary | 1 |
225-0998 Manifold Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 14***56 | Hose As | 1 |
246-4682 Muffler Gp
| 10***07 | Hose As; (Marked J) | 1 |
| 10***08 | Hose As; (Marked G) | 1 |
| 10***10 | Hose As; (Marked H) | 1 |
262-1078 Turbocharger Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 14***56 | Hose As | 1 |
302-7443 Turbocharger Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 16***00 | Manifold | 1 |
| 2R***06 | Connector Valve Assembly To; Connector- Tube Assembly To Logic Valve | 1 |
Air System
107-9376 Filter Gp-Air
| 07***01 | Volute | 1 |
| 07***01 | Frame | 1 |
| 07***09 | Slinger | 1 |
250-4613 Pneumatic Ar
| 09***99 | Key-Square | 1 |
| 10***65 | Kit-Valve; (Water Spray Pump) | 1 |
| 10***67 | Kit-Plunger; (Water Spray Pump) | 3 |
116-7780 Tank Gp-Air
| 07***01 | Volute | 1 |
| 07***01 | Frame | 1 |
| 07***09 | Slinger | 1 |
Basic Engine
133-9907 Adapter Gp-Pump Drive
| 13***06 | Adapter | 1 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 1B***67 | Ball Bearing | 2 |
166-8314 Air Compressor Gp
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 1 |
| 10***40 | Gear; (40-Teeth) | 1 |
| 11***04 | Seal | 1 |
240-9754 Air Compressor Gp
| 03***43 | Adapter - 45 Degrees - 8 Valve Ports P, T, C1, C2 | 1 |
| 10***96 | Hose As | 1 |
| 11***04 | Seal | 1 |
164-7566 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 14 |
| 10***16 | Key-Woodruff | 1 |
278-5662 Base Gp-Valve Cover & Inj Harn
| 10***18 | Clip | 3 |
| 10***19 | Clip | 3 |
| 10***34 | Kit-Receptacle; (12-Pin)(Valve Cover & Inj Harness) | 1 |
234-5005 Base Gp-Valve Cover & Inj Harn
| 10***18 | Clip | 3 |
| 10***19 | Clip | 3 |
| 12***72 | Bolt; (5/16-18x2.36-In) | 1 |
190-6563 Belt Tensioner Gp
| 19***60 | Belt-Serpentine | 1 |
| 19***63 | Belt Tensioner Group | 1 |
| 21***38 | Belt Tensioner; (Refrigerant Compressor) | 1 |
243-0551 Camshaft Gp
| 10***89 | Cover | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 3 |
| 24***51 | Camshaft Group | 1 |
8n-3148 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 4N***99 | Gasket; (Oil Drain) | 2 |
| 4W***90 | Cover | 2 |
220-6390 Cover Gp-Flywheel Housing
| 22***90 | Cover Group-Flywheel Housing | 1 |
| 4N***14 | Cover | 1 |
| 6V***29 | Bolt; (M16x2.0x40mm) | 3 |
216-5540 Cover Gp-Flywheel Housing
| 21***40 | Cover Group-Flywheel Housing; -Bottom | 1 |
| 21***00 | Cover | 1 |
| 4M***80 | Gasket Elbow Mtg Part Of Kit P/N 5r***26 | 1 |
159-6159 Cover Gp-Front Housing
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 15***59 | Cover Group-Front Housing | 1 |
| 16***71 | Seal | 1 |
150-3135 Cover Gp-Valve Mechanism
| 15***35 | Cover Group-Valve Mechanism | 1 |
| 27***83 | Seal-O-Ring | 1 |
| 7C***14 | Adapter | 1 |
225-1147 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 22***47 | Cover Group-Valve Mechanism | 2 |
| 24***37 | Seal; (Cover, Valve Mechanism) | 1 |
275-8900 Cover Gp-Valve Mechanism
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
160-7452 Cover Gp-Valve Mechanism
| 11***53 | Cap As-Filler; (Engine Oil) | 1 |
| 14***78 | Grommet | 1 |
| 16***52 | Cover Group-Valve Mechanism | 1 |
225-1148 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 22***48 | Cover Group-Valve Mechanism | 1 |
| 24***37 | Seal; (Cover, Valve Mechanism) | 1 |
225-1149 Cover Gp-Valve Mechanism
| 22***48 | Cover Group-Valve Mechanism | 1 |
| 22***49 | Cover Group-Valve Mechanism | 2 |
| 23***11 | Cover Group-Valve Mechanism | 1 |
150-3139 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 15***39 | Cover Group-Valve Mechanism | 1 |
| 22***44 | Cover-Valve | 1 |
239-4111 Cover Gp-Valve Mechanism
| 18***81 | Gear-Crankshaft; (80-Teeth) | 1 |
| 18***18 | Crankshaft As | 1 |
| 23***11 | Cover Group-Valve Mechanism | 1 |
236-2230 Cover Gp-Valve Mechanism
| 22***48 | Cover Group-Valve Mechanism | 1 |
| 22***49 | Cover Group-Valve Mechanism | 1 |
| 23***30 | Cover Group-Valve Mechanism | 2 |
239-4112 Cover Gp-Valve Mechanism
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
223-9732 Crankshaft Gp
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 16***83 | Bolt; (7/8-14x7.5-In) | 14 |
| 22***32 | Crankshaft Group | 1 |
222-1975 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
261-0052 Cylinder Block As
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
323-8451 Cylinder Block As
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
267-4631 Cylinder Block As
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
229-8568 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 12 |
| 22***68 | Cylinder Block As | 1 |
301-3018 Cylinder Block As
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
261-0191 Cylinder Block Gp
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
223-9253 Cylinder Block Gp
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
243-0943 Cylinder Head As
| 15***23 | Valve; (Inlet) | 12 |
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
223-7263 Cylinder Head As
| 15***23 | Valve; (Inlet) | 12 |
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
281-1640 Cylinder Head As
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 10 |
| 12***54 | Bolt-12 Point Head; (3/4-16x8.5-In) | 1 |
| 12***55 | Bolt-12 Point Head; (3/4-16x7.638-In) | 1 |
243-6741 Cylinder Head As
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 10 |
| 12***54 | Bolt-12 Point Head; (3/4-16x8.5-In) | 1 |
| 12***55 | Bolt-12 Point Head; (3/4-16x7.638-In) | 1 |
235-2974 Cylinder Head Gp
| 14***68 | Stud-Taperlock | 2 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 2 |
| 23***74 | Cylinder Head Group | 1 |
223-9250 Cylinder Head Gp
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 18***01 | Rotocoil Assem. | 24 |
263-5055 Cylinder Head Gp
| 26***55 | Cylinder Head Group | 1 |
| 5J***94 | Screw,Cap,Socket He Manifold Mtg | 12 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 6 |
227-3705 Damper Gp
| 22***05 | Damper Group | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
108-9382 Fastener Gp-Front Housing
| 10***26 | Dowel | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
| 9X***72 | Bolt-Locking; (3/8-16x0.875-In) | 16 |
4p-6846 Fastener Gp-Front Housing
| 0S***53 | Bolt,Machine Flywheel Assembly | 12 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 12 |
| 4P***46 | Fastener Group-Front Housing; -Remote | 1 |
109-1657 Fastener Gp-Valve Mechanism
| 03***85 | Bolt-12 Point Hd-Engine Flywheel To | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***68 | Bearing-Sleeve | 1 |
7w-3499 Flywheel As
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 12 |
| 18***23 | Bolt-12 Point Head; (M12x1.75x60-mm) | 8 |
| 20***11 | Gear As-Idler; (53-Teeth) | 2 |
236-1790 Flywheel Gp
| 23***90 | Flywheel Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
| 9M***02 | Kit; (Governor Overhaul) (Includes Cover, Gasket, Grommet, Spring, Filter, Valve And Ring) | 1 |
204-9316 Gear Gp-Camshaft
| 17***87 | Adapter | 1 |
| 20***16 | Gear Group-Camshaft | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
207-0449 Gear Gp-Front
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 20***49 | Gear Group-Front | 1 |
| 29***42 | Kit-Adapter; (Governor) | 1 |
236-1795 Gear Gp-Rear
| 14***95 | Plug As | 2 |
| 14***11 | Plug Group | 2 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 4 |
262-4154 Governor Gp-Air Compressor
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 11***44 | Eye-Lifting | 1 |
| 26***54 | Governor Group-Air Compressor | 1 |
4n-9680 Governor Gp-Air Compressor
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 11 |
224-4501 Governor Gp-Air Compressor
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 10***85 | Eye-Lifting | 1 |
| 22***01 | Governor Group-Air Compressor | 1 |
349-2539 Housing Gp-Flywheel
| 19***98 | Rocker Arm Group | 3 |
| 34***39 | Housing Group-Flywheel | 1 |
| 6I***58 | Bridge-Valve | 12 |
223-4423 Housing Gp-Flywheel
| 00***99 | Tee To Bushing | 1 |
| 00***26 | Connector; (Flared)(3/4-16 Thd, 47 mm Long) | 1 |
| 10***85 | Hose As | 1 |
159-8616 Housing Gp-Front
| 15***16 | Housing Group-Front | 1 |
| 27***31 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
111-2088 Lifting Gp-Engine
| 11***88 | Lifting Group-Engine; (Rear) | 1 |
| 27***29 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
111-2355 Lifting Gp-Engine
| 11***55 | Lifting Group-Engine; (Front) | 1 |
| 32***36 | Rocker Arm Group; -Non-Brake | 3 |
| 6I***58 | Bridge-Valve | 12 |
247-4484 Lines Gp-Air Compressor
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 18***55 | Support | 1 |
190-0009 Mechanism Gp-Fuel Pump & Valve
| 15***25 | Bolt; (7/16-14-2a-Thd) | 1 |
| 18***50 | Pin-Piston | 1 |
| 19***09 | Mechanism Group-Fuel Pump & Valve | 1 |
148-7482 Mechanism Gp-Fuel Pump & Valve
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***76 | Seal-O-Ring; (50.17mm Id) | 1 |
188-1754 Mounting Gp-Alternator & Compr
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
175-3860 Pan Gp-Oil -Engine
| 17***60 | Pan Group-Oil; -Engine | 1 |
| 18***08 | Plug As; (High Temperature) | 4 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
335-1893 Pan Gp-Oil -Engine
| 17***48 | Pulley; (8 Groove) | 1 |
| 33***93 | Pan Group-Oil; -Engine | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 4 |
234-6136 Piston & Rod Gp
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 14***22 | Bolt-Special; (M10x1.5 Thd) | 1 |
| 14***23 | Spacer-Special | 1 |
353-9979 Plate As-Front Housing
| 03***13 | Seal-O-Ring | 2 |
| 06***39 | Seal-O-Ring | 2 |
| 19***51 | Button; (24-mm Od) | 2 |
229-9477 Plug Gp-Cylinder Block
| 06***39 | Seal-O-Ring | 2 |
| 19***51 | Button; (24-mm Od) | 2 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 2 |
305-9196 Plug Gp-Cylinder Block
| 06***39 | Seal-O-Ring | 2 |
| 19***51 | Button; (24-mm Od) | 2 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 2 |
229-6711 Plug Gp-Cylinder Head
| 22***11 | Plug Group-Cylinder Head | 1 |
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
170-1757 Pulley Gp-Crankshaft
| 17***57 | Pulley Group-Crankshaft | 1 |
| 30***22 | Shaft As-Rocker Arm, Exhaust Manifold | 1 |
| 32***96 | Rocker Arm Group; -Intake | 4 |
172-0988 Pulley Gp-Idler
| 06***39 | Seal-O-Ring | 1 |
| 17***88 | Pulley Group-Idler; (Idler) | 1 |
| 19***51 | Button; (24-mm Od) | 1 |
328-4236 Rocker Arm Gp -Non-Brake
| 2P***04 | Stud-Hollow; (1.5-16x1.339-In) | 1 |
| 32***36 | Rocker Arm Group; -Non-Brake | 1 |
| 9L***57 | Plug-Cup | 2 |
328-4238 Rocker Arm Gp
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 15***80 | Elbow | 1 |
198-9898 Rocker Arm Gp
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 19***98 | Rocker Arm Group | 1 |
278-1929 Rocker Arm Gp
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 27***29 | Rocker Arm Group | 1 |
278-1931 Rocker Arm Gp
| 19***65 | Support As | 1 |
| 27***31 | Rocker Arm Group | 1 |
| 2H***88 | Bolt- 12 cm(4.75 In.) Long-Location "F" | 8 |
320-2796 Rocker Arm Gp
| 25***09 | Mount As | 1 |
| 25***98 | Mount As | 1 |
| 32***96 | Rocker Arm Group; -Intake | 1 |
319-0785 Seal Gp-Crankshaft -Rear
| 17***63 | Base Group-Oil Filter; -Engine | 1 |
| 1P***67 | Plunger; (Engine Oil Cooler Relief Valve) | 2 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
319-7401 Seal Gp-Crankshaft -Front
| 16***66 | Breather As; (Crankcase) | 1 |
| 2N***09 | Clamp; (V-Band) | 1 |
| 31***01 | Seal Group-Crankshaft; -Front | 1 |
246-4678 Support Gp-Engine
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
193-7413 Support Gp-Engine
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 19***13 | Support Group-Engine | 1 |
Braking System
1g-8121 Brake Gp -Rotor
| 05***12 | Ring-Retaining; (Internal) | 1 |
| 1G***21 | Brake Group; -Rotor | 1 |
| 3D***92 | Packing,Preformed Bushing Part Of Kit P/N 5r***25 | 1 |
1g-7792 Brake Gp -Rotor
| 09***64 | Pin-Cotter | 2 |
| 12***24 | Link As | 1 |
| 12***25 | Clamp As | 2 |
142-9941 Lines Gp-Service Brake -Propel
| 14***41 | Lines Group-Service Brake; -Propel | 1 |
| 1G***77 | Control & Mtg Group-Steering | 1 |
| 1G***78 | Link Group-Steering | 1 |
268-0072 Lines Gp-Service Brake -Rotor
| 1G***12 | Valve Group-Relief; -Hydraulic Steering | 1 |
| 26***72 | Lines Group-Service Brake; -Rotor | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
Cooling System
224-0875 Fitting Gp-Water Lines
| 22***75 | Fitting Group-Water Lines | 1 |
| 26***55 | Motor Group-Piston | 1 |
| 27***21 | Cooler-Oil; (Hydraulic) | 1 |
247-4473 Lines Gp-Coolant
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 03***19 | Cap As-Radiator | 1 |
| 05***13 | Connector | 1 |
236-1792 Lines Gp-Water
| 14***18 | Connector As | 1 |
| 16***97 | Connector As | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
161-5719 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***69 | Body As | 1 |
| 13***70 | Cup As | 1 |
174-5986 Pump Gp-Water
| 10***19 | Elbow | 1 |
| 13***85 | Air Cleaner Group | 1 |
| 13***47 | Bracket As | 1 |
246-4680 Radiator & Mounting Gp
| 10***19 | Elbow | 1 |
| 13***85 | Air Cleaner Group | 1 |
| 13***47 | Bracket As | 1 |
249-2610 Radiator Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 10***03 | Elbow; (Air Inlet) | 1 |
252-9558 Tank Gp-Coolant
| 12***29 | Clamp; (V-Band) | 1 |
| 12***00 | Adapter | 1 |
| 25***58 | Tank Group-Coolant | 1 |
257-2706 Valve Gp-Radiator Drain
| 25***64 | Tube | 1 |
| 25***65 | Tube | 1 |
| 25***06 | Valve Group-Radiator Drain | 1 |
Electrical And Starting System
244-1090 Alarm Gp -Backup
| 15***96 | Support As | 1 |
| 15***98 | Support As | 1 |
| 16***19 | Stud | 4 |
3e-6328 Alarm Gp
| 17***99 | Stud; (3/8-16-Thd) | 1 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 1 |
197-8820 Alternator Gp-Charging
| 08***62 | Ring | 2 |
| 11***37 | Shaft | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
190-6564 Alternator Gp-Charging
| 17***11 | Spacer; (10.5x22x50.8-mm Thk) | 1 |
| 19***64 | Alternator Group-Charging | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
246-4603 Battery & Wiring Gp
| 16***92 | Block As-Mounting; (Position Sensor) | 1 |
| 16***34 | Mount As | 1 |
| 16***00 | Arm As | 1 |
9w-0742 Block Gp-Junction -Battery
| 10***63 | Clamp | 3 |
| 11***96 | Plug | 1 |
| 11***98 | Plug | 1 |
159-9107 Connection Gp-Electrical -Cylinder Head Ground
| 10***63 | Clamp | 2 |
| 11***98 | Plug | 1 |
| 11***04 | Housing | 2 |
241-7598 Control & Mtg Gp-Engine Elek
| 24***98 | Control & Mtg Group-Engine Elek | 1 |
| 24***03 | Battery & Wiring Group | 1 |
| 24***05 | Wiring Group-Console | 1 |
276-0576 Control & Mtg Gp-Engine Elek
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 27***76 | Control & Mtg Group-Engine Elek | 1 |
6r-3010 Control & Mtg Gp-Rotor Elek
| 28***21 | Guard As-Alternator | 1 |
| 6R***10 | Control & Mtg Group-Rotor Elek | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
1g-7777 Control & Mtg Gp-Steering
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***66 | Socket-Connector; (14-Ga To 18-Ga) | 14 |
265-9362 Control Gp-Grade & Slope
| 26***62 | Control Group-Grade & Slope | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
266-7199 Control Gp-Grade & Slope
| 26***99 | Control Group-Grade & Slope | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
314-4922 Control Gp-Unprogrammed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
250-4606 Electrical Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
278-0085 Guard Gp-Alternator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
318-9713 Installation Gp-Communication -Product Link
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***45 | Support As | 1 |
171-2065 Lamp Gp-Flood
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
9x-1439 Lamp Gp-Flood
| 12***35 | Plug-Felt; (Unit Injector Hydraulic Pump) | 1 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
162-3294 Lamp Gp-Flood
| 12***35 | Plug-Felt; (Unit Injector Hydraulic Pump) | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 1 |
9x-4381 Lamp Gp-Flood
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
| 11***50 | Kit-Transducer | 1 |
3e-6466 Lamp Gp-Signal -Front-Rear
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***68 | Plate As | 1 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 1G***98 | Sensor Group-Position; -Elevation | 2 |
| 1G***99 | Sensor Group-Position; -Elevation | 2 |
110-9746 Lighting Gp-Warning Beacon
| 10***63 | Clamp | 2 |
| 11***98 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
292-9793 Lighting Gp-Warning Beacon
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***70 | Spacer Assem. | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
266-3767 Mounting Gp-Sensor -Grade
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Diode-Zener | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
259-4756 Mounting Gp-Sensor -Atmospheric, Engine Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***70 | Spacer Assem. | 1 |
| 1W***48 | Dowel | 2 |
276-0075 Mounting Gp-Sensor
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***03 | Diode-Zener | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
201-4846 Panel Gp-Electronic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 20***46 | Panel Group-Electronic | 1 |
201-4845 Panel Gp-Electronic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 20***45 | Panel Group-Electronic | 1 |
266-1621 Sensor & Mtg Gp-Elevation
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 26***21 | Sensor & Mtg Group-Elevation | 1 |
1g-9610 Sensor & Mtg Gp-Elevation
| 1G***10 | Sensor & Mtg Group-Elevation | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
231-1973 Sensor Gp-Engine
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
| 23***73 | Sensor Group-Engine | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
1g-9499 Sensor Gp-Position -Elevation
| 1G***99 | Sensor Group-Position; -Elevation | 1 |
| 23***78 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
6r-0486 Sensor Gp-Position -Kickback Ski-Service Door
| 6R***86 | Sensor Group-Position; -Kickback Ski-Service Door | 1 |
| 8T***75 | Wire-Electrical; (16-Ga, Black)(13-cm Each) | 0 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
1g-9498 Sensor Gp-Position -Elevation
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 1G***98 | Sensor Group-Position; -Elevation | 1 |
214-4863 Sensor Gp-Position
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
153-3962 Sensor Gp-Pressure -Brake Air
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***61 | Bracket | 1 |
| 15***62 | Sensor Group-Pressure; -Lockup Clutch | 1 |
239-2396 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
194-6725 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 20***17 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 22***47 | Seal-O-Ring | 1 |
194-6722 Sensor Gp-Pressure
| 13***45 | Pad; (Connector) | 1 |
| 19***03 | Sensor Group-Speed | 1 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
239-3478 Sensor Gp-Pressure
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 23***78 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
239-2395 Sensor Gp-Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 23***95 | Sensor Group-Pressure; -Atmospheric Air | 1 |
239-5674 Sensor Gp-Pressure
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 23***74 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
193-5518 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 19***18 | Sensor Group-Speed; -Engine | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
201-6617 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 20***17 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
239-5928 Sensor Gp-Speed
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
100-6620 Sensor Gp-Speed -Propel
| 10***20 | Sensor Group-Speed; -Propel | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
214-2484 Sensor Gp-Speed
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 18***93 | Cable As-Starting Motor | 1 |
| 1M***86 | Terminal-Ring; (0-Ga, 1/2-In Screw) | 1 |
274-7395 Sensor Gp-Temperature
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
274-7396 Sensor Gp-Temperature
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
197-8392 Sensor Gp-Temperature
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
234-5013 Sensor Gp-Temperature
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
197-8391 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-8700 Sensor Gp-Temperature
| 2H***22 | Lockwasher | 2 |
| 3E***00 | Sensor Group-Temperature; -Transmission Oil | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
237-1962 Starting Motor Gp-Electric
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 23***62 | Starting Motor Group-Electric | 1 |
209-8423 Starting Motor Gp-Electric
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 20***23 | Starting Motor Group-Electric; -Heavy-Duty | 1 |
338-3454 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***54 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 26***29 | Seal-Connector; (3-cm) | 1 |
134-6054 Switch Gp-Flow -Coolant
| 13***80 | Film-Instruction; (Cutter Hazard, Stay Back) | 1 |
| 13***81 | Film-Instruction; (Cutter Hazard, Stay Back) | 1 |
| 13***54 | Switch Group-Flow; -Coolant | 1 |
172-8660 Switch Gp-Liquid Level -Fuel
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
175-2308 Switch Gp-Magnetic -Start Relay
| 03***14 | Screw; (10-32x1-In) | 4 |
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 4 |
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 2 |
241-8368 Switch Gp-Magnetic -Main Relay
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 2 |
175-2309 Switch Gp-Magnetic -Start Relay
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
118-3534 Switch Gp-Magnetic -Start Relay
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 10 |
| 10***04 | Suppressor As-Arc | 3 |
| 11***29 | Cap-Dust | 10 |
167-0138 Switch Gp-Magnetic -Main Relay
| 03***14 | Screw; (10-32x1-In) | 4 |
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 4 |
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 2 |
254-3783 Switch Gp-Magnetic -Main Relay
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 2 |
275-1253 Switch Gp-Pressure
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 1 |
258-0883 Switch Gp-Pressure -Fuel
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 2 |
137-8092 Switch Gp-Rotor Door
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 9 |
| 11***18 | Clip | 2 |
259-6264 Wiring Gp-Center
| 06***71 | Terminal-Blade | 64 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 9 |
246-4605 Wiring Gp-Console
| 0L***07 | Grommet | 1 |
| 10***05 | Cap-Receptacle | 1 |
| 10***62 | Harness As-Sensor; (Travel Speed) | 1 |
201-6947 Wiring Gp-Conveyor
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 11***86 | Enclosure | 1 |
| 11***73 | Knob; (Red)(Emergency Stop) | 1 |
279-0460 Wiring Gp-Electronic Control
| 13***94 | Plate | 1 |
| 1G***49 | Shaft-Output | 1 |
| 1T***79 | Ring-Retaining | 1 |
227-9939 Wiring Gp-Electronic Control
| 08***53 | Lamp; (24-Volt)(Remote Engine Stop) | 1 |
| 11***86 | Enclosure | 1 |
| 11***73 | Knob; (Red)(Emergency Stop) | 1 |
254-7213 Wiring Gp-Engine
| 14***33 | Motor & Mtg Group-Propel | 1 |
| 14***41 | Lines Group-Service Brake; -Propel | 1 |
| 1G***99 | Filter & Mtg Group-Hydraulic | 1 |
141-2462 Wiring Gp-Front
| 08***56 | Nut | 24 |
| 08***73 | Clamp | 12 |
| 08***86 | Clamp | 12 |
246-4607 Wiring Gp-Machine
| 10***20 | Sensor Group-Speed; -Propel | 1 |
| 11***52 | Seal-O-Ring | 4 |
| 14***34 | Motor Group-Piston; -Propel | 3 |
259-6265 Wiring Gp-Rear
| 07***64 | Seal-O-Ring | 1 |
| 07***90 | Ring-Retaining | 1 |
| 11***62 | Spacer-Thrust | 1 |
133-4060 Wiring Gp-Rotor
| 13***60 | Wiring Group-Rotor | 1 |
| 1G***32 | Door As | 1 |
| 2G***82 | Bumper | 2 |
257-4183 Wiring Gp-Unit Injector
| 25***83 | Wiring Group-Unit Injector | 1 |
| 29***73 | Bumper | 2 |
| 29***78 | Door As | 1 |
Engine Arrangement
234-7926 Engine Ar-Complete
| 10***82 | Fastener Group-Front Housing | 1 |
| 10***02 | Elbow Group-Air Inlet | 1 |
| 11***88 | Lifting Group-Engine; (Rear) | 1 |
241-5935 Engine Ar-Core
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 14***82 | Mechanism Group-Fuel Pump & Valve | 1 |
| 19***09 | Mechanism Group-Fuel Pump & Valve | 1 |
250-4604 Installation Ar-Engine
| 24***78 | Support Group-Engine | 1 |
| 24***79 | Fumes Disposal Group | 1 |
| 24***80 | Radiator & Mounting Group | 1 |
Frame And Body
1g-7775 Cover Gp-Rear
| 1G***75 | Cover Group-Rear | 1 |
| 25***76 | Guard As | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
258-4536 Door Gp-Access -Rh
| 12***21 | Bar | 2 |
| 12***22 | Plate | 1 |
| 12***50 | Cap | 2 |
1g-8170 Door Gp-Access -Rear
| 10***82 | Support Group-Hood | 1 |
| 11***62 | Washer | 83 |
| 13***60 | Plate As | 1 |
294-2577 Door Gp-Access -Rear
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 12 |
| 13***18 | Washer-Thrust | 2 |
| 16***56 | Collar | 2 |
246-4532 Enclosure Gp-Engine
| 1G***96 | Rod-Threaded | 1 |
| 1G***98 | Bar-Round | 1 |
| 1H***59 | Grommet | 1 |
244-4116 Frame Gp
| 10***76 | Clamp-Half | 2 |
| 14***54 | Hose Assem. | 1 |
| 24***16 | Frame Group | 1 |
124-8306 Frame Gp-Telescoping
| 12***06 | Frame Group-Telescoping | 1 |
| 7K***18 | Washer (Seal) | 104 |
| 7K***20 | Bushing-Terminal; (Master) | 1 |
250-5759 Grill Gp-Radiator
| 1G***76 | Plate | 1 |
| 25***59 | Grill Group-Radiator | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
246-4535 Guard Gp-Belt
| 08***25 | Plate | 1 |
| 10***58 | Plate | 1 |
| 1G***76 | Plate | 1 |
246-4536 Guard Gp-Bottom
| 12***38 | Rim As-Single Flange | 1 |
| 12***48 | Bushing Assem. | 2 |
| 13***39 | Shaft-Track Roller | 1 |
247-9911 Guard Gp-Drive Shaft
| 10***30 | Rod | 1 |
| 24***11 | Guard Group-Drive Shaft | 1 |
| 6V***61 | Rod End | 1 |
250-5723 Hood Gp
| 1G***59 | Bolt; (1-14x2.5-In) | 2 |
| 1G***60 | Support | 1 |
| 1G***96 | Spacer; (1.46-In Thk) | 2 |
125-0695 Idler Gp-Track
| 08***29 | Arm | 1 |
| 12***95 | Bearing | 1 |
| 12***27 | Retainer | 1 |
190-1551 Idler Gp-Track
| 08***92 | Arm | 1 |
| 12***95 | Bearing | 1 |
| 12***27 | Retainer | 1 |
129-9822 Ladder Gp
| 10***97 | Foam | 1 |
| 10***98 | Foam | 1 |
| 10***99 | Foam | 1 |
1g-8997 Latch Gp -Rear
| 08***37 | Pipe | 1 |
| 08***63 | Piston | 1 |
| 11***97 | Cylinder As | 1 |
194-6091 Lines Gp-Grease -Conveyor
| 08***37 | Pipe | 1 |
| 08***63 | Piston | 1 |
| 11***97 | Cylinder As | 1 |
6y-8795 Link As-Track
| 10***99 | Track Group | 4 |
| 6Y***95 | Link As-Track | 1 |
1g-7177 Plate Gp
| 1G***77 | Plate Group | 1 |
| 1M***08 | Nut-Track | 104 |
| 23***82 | Shoe As-Track; (Padded)(Poly) | 26 |
1g-7237 Plate Gp
| 12***95 | Idler Group-Track | 1 |
| 12***98 | Roller Group-Track | 4 |
| 14***81 | Track Adjuster & Recoil Group; -Lh | 1 |
128-6898 Roller Gp-Track
| 12***95 | Idler Group-Track | 1 |
| 12***98 | Roller Group-Track | 5 |
| 14***80 | Track Adjuster & Recoil Group; -Rh | 1 |
124-8237 Roller Gp-Track-Single Flange
| 0L***69 | Bolt (5/8-11 Thd X 3.750 In Long | 3 |
| 0S***93 | Bolt (1 1/4" Long) | 12 |
| 12***37 | Roller Group-Track-Single Flange | 1 |
104-4982 Support Gp-Hood
| 10***82 | Support Group-Hood | 1 |
| 10***42 | Screw-Machine | 8 |
| 10***45 | Lining | 2 |
1g-7774 Support Gp-Service
| 10***85 | Hose As | 1 |
| 10***44 | Hose As | 1 |
| 10***45 | Hose As | 1 |
122-4235 Support Gp-Undercarriage -Front, Rh; Rear, Lh
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***70 | Column | 1 |
122-4234 Support Gp-Undercarriage -Front, Lh; Rear, Rh
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 10***52 | Hose As | 2 |
| 12***34 | Support Group-Undercarriage; -Front, Lh; Rear, Rh | 1 |
253-7551 Suppression Gp-Sound -Hood
| 08***62 | Ring | 2 |
| 11***37 | Shaft | 1 |
| 1G***14 | Block | 1 |
145-2280 Track Adjuster & Recoil Gp -Rh
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 10***98 | Kit-Seal; (Steering Cylinder) | 1 |
| 14***80 | Track Adjuster & Recoil Group; -Rh | 1 |
145-2281 Track Adjuster & Recoil Gp -Lh
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 10***98 | Kit-Seal; (Steering Cylinder) | 1 |
| 10***91 | Cover As | 1 |
263-9207 Track Gp -Rh
| 10***74 | Hose As | 1 |
| 10***83 | Hose As | 1 |
| 10***84 | Hose As | 1 |
106-3099 Track Gp
| 10***57 | Cylinder & Mtg Group-Steering | 1 |
| 10***99 | Track Group | 1 |
| 1G***99 | Valve & Mtg Group-Steering | 2 |
263-9206 Track Gp -Lh
| 11***95 | Guide As | 1 |
| 26***06 | Track Group; -Lh | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
106-3093 Track Gp
| 10***93 | Track Group | 1 |
| 5E***28 | Washer-Thrust | 2 |
| 5K***23 | Bearing-Sleeve | 4 |
Fuel System
226-1804 Filter Gp-Water Sep & Fuel
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
176-5618 Filter Gp-Water Sep & Fuel
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
236-1791 Lines Gp-Fuel
| 23***91 | Lines Group-Fuel | 1 |
| 9G***40 | Spacer; (10.5x25x15-mm Thk) | 1 |
| 9R***33 | Boss | 2 |
247-4474 Lines Gp-Fuel
| 0S***99 | Stud (1.4325" Long) | 2 |
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 2 |
| 13***16 | Cover | 1 |
276-0575 Lines Gp-Fuel
| 0S***99 | Stud (1.4325" Long) | 2 |
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 2 |
| 13***16 | Cover | 1 |
256-9598 Manifold Gp-Fuel
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
256-4541 Mounting Gp-Fuel Filter
| 03***28 | Seal-O-Ring | 1 |
| 10***99 | Pad | 2 |
| 11***34 | Plate As-Cover | 1 |
174-7464 Mounting Gp-Fuel Line
| 17***64 | Mounting Group-Fuel Line | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
150-4279 Pump & Mtg Gp-Fuel Transfer -Rear
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 15***79 | Pump & Mtg Group-Fuel Transfer | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
235-1403 Pump Gp-Fuel Injection
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***03 | Pump Group-Fuel Injection | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
165-9154 Pump Gp-Fuel Priming
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
163-0378 Tank Gp-Fuel & Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***78 | Tank Group-Fuel & Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
281-2725 Valve Gp-Check -Fuel
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
233-6742 Valve Gp-Check -Fuel
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 2 |
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 08***79 | Cable As | 1 |
Hydraulic System
087-1788 Cap & Strainer Gp-Hyd Oil Fill
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 11***78 | Seal-O-Ring | 1 |
201-6864 Cylinder & Mtg Gp-Conveyor -Lift
| 06***50 | Nut-Self-Locking | 1 |
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
131-3478 Cylinder & Mtg Gp-Conveyor -Swing
| 03***39 | Ring-Back-Up | 1 |
| 11***80 | Nylock | 2 |
| 13***78 | Cylinder & Mtg Group-Conveyor; -Swing | 1 |
132-3933 Cylinder & Mtg Gp-Door -Front
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 03***39 | Ring-Back-Up | 1 |
| 13***33 | Cylinder & Mtg Group-Door; -Front | 1 |
204-5359 Cylinder & Mtg Gp-Elevation -Front
| 20***59 | Cylinder & Mtg Group-Elevation; -Front | 1 |
| 24***95 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 4D***31 | Bearing-Aligning | 1 |
124-8307 Cylinder & Mtg Gp-Elevation -Rear
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 12***07 | Cylinder & Mtg Group-Elevation; -Rear | 1 |
| 1G***41 | Valve Group-Counterbalance; (Elevation Cylinder) | 1 |
1g-7910 Cylinder & Mtg Gp-Hood
| 1G***10 | Cylinder & Mtg Group-Hood | 1 |
| 24***64 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 5E***80 | Ring-Retaining | 1 |
112-9873 Cylinder & Mtg Gp-Side Plate
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 11***73 | Cylinder & Mtg Group-Side Plate | 1 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
1g-7919 Cylinder & Mtg Gp-Tensioner
| 12***86 | Seal-O-Ring | 1 |
| 13***60 | Indicator | 1 |
| 1G***77 | Filter Group-Oil; (Hydraulic) | 1 |
1g-9144 Cylinder Gp-Hydraulic -Mixing Chamber Tilt
| 05***15 | Gasket | 1 |
| 10***52 | Indicator As-Filter Change; (Alarm Dirt) | 1 |
| 1G***44 | Cylinder Group-Hydraulic; -Mixing Chamber Tilt | 1 |
132-3934 Cylinder Gp-Hydraulic -Front Door
| 11***27 | Lines Group-Motor | 1 |
| 13***34 | Cylinder Group-Hydraulic; -Front Door | 1 |
| 1G***81 | Hydraulic Ar-Steering | 1 |
5e-4182 Cylinder Gp-Hydraulic -Moldboard
| 00***54 | Nipple-Pipe | 2 |
| 08***12 | Coupling-Hose | 2 |
| 08***30 | Tube; (118.1 cm) | 0 |
239-6112 Cylinder Gp-Hydraulic -Conveyor Swing
| 1G***09 | Lines Group-Lift Cylinder; -Engine Enclosure | 1 |
| 1G***10 | Cylinder & Mtg Group-Hood | 2 |
| 23***12 | Cylinder Group-Hydraulic; -Conveyor Swing | 1 |
209-4734 Cylinder Gp-Hydraulic -Elevation, Front
| 20***87 | Pump & Mtg Group-Conveyor & Fan | 1 |
| 20***34 | Cylinder Group-Hydraulic; -Elevation, Front | 1 |
| 24***39 | Valve & Mtg Group-Conveyor Speed | 1 |
209-7647 Cylinder Gp-Hydraulic -Elevation, Rear
| 12***07 | Cylinder & Mtg Group-Elevation; -Rear | 2 |
| 19***92 | Lines Group-Lift Cylinder; -Elevation | 1 |
| 20***59 | Cylinder & Mtg Group-Elevation; -Front | 2 |
086-9600 Cylinder Gp-Hydraulic -Hood Tilt
| 08***00 | Cylinder Group-Hydraulic; -Hood Tilt | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
204-5736 Cylinder Gp-Hydraulic -Tensioner
| 10***01 | Lines Group-Lift Cylinder; -Conveyor | 1 |
| 13***78 | Cylinder & Mtg Group-Conveyor; -Swing | 1 |
| 14***04 | Valve & Mtg Group-Conveyor Speed | 1 |
111-8548 Cylinder Gp-Hydraulic -Side Plate
| 11***48 | Cylinder Group-Hydraulic; -Side Plate | 1 |
| 1G***95 | Filter & Mtg Group-Hydraulic | 1 |
| 1G***23 | Pump & Mtg Group-Electric Drive | 1 |
200-3207 Cylinder Gp-Hydraulic -Conveyor
| 1G***21 | Lines Group-Auxiliary Hydraulic; -Rotor | 1 |
| 1G***22 | Motor & Mtg Group-Auxiliary | 1 |
| 20***07 | Cylinder Group-Hydraulic; -Conveyor | 1 |
6i-3638 Drive Gp-Pump
| 24***44 | Pump & Mtg Group-Hydraulic | 1 |
| 24***46 | Valve & Mtg Group-Bank; -Hydraulic Fan | 1 |
| 24***47 | Lines Group-Hydraulic Fan | 1 |
1g-7895 Filter & Mtg Gp-Hydraulic
| 13***23 | Lines Group-Lift Cylinder; -Front Door | 1 |
| 13***29 | Valve & Mtg Group-Door | 1 |
| 13***33 | Cylinder & Mtg Group-Door; -Front | 1 |
251-7136 Filter Gp-Oil -Hydraulic
| 1G***13 | Valve & Mtg Group-Moldboard | 1 |
| 1G***14 | Lines Group-Lift Cylinder; -Moldboard | 1 |
| 25***36 | Filter Group-Oil; -Hydraulic | 1 |
077-5200 Gauge Gp-Sight -Hydraulic Tank
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 1G***18 | Lines Group-Tensioner Cylinder | 1 |
| 1G***19 | Cylinder & Mtg Group-Tensioner | 1 |
6r-3638 Gauge Gp-Sight -Water Level
| 11***73 | Cylinder & Mtg Group-Side Plate | 1 |
| 11***74 | Valve & Mtg Group-Control | 1 |
| 11***01 | Lines Group-Door Cylinder | 1 |
268-6663 Hydraulic Ar-Accessory
| 08***32 | Hose As | 1 |
| 10***52 | Hose As, . Head | 1 |
| 10***53 | Hose As | 1 |
250-4607 Hydraulic Ar-Auxiliary
| 10***21 | Hose As | 1 |
| 10***38 | Clamp-Half | 2 |
| 10***57 | Hose As | 1 |
1g-7888 Hydraulic Ar-Auxiliary Drive
| 14***99 | Hose As | 1 |
| 1G***88 | Hydraulic Ar-Auxiliary Drive | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
250-4611 Hydraulic Ar-Conveyor -Primary
| 08***99 | Bar | 2 |
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 11***70 | Hose As | 1 |
250-4610 Hydraulic Ar-Conveyor -Secondary
| 08***99 | Bar | 2 |
| 10***39 | Valve Group-Check; (Rotor Door Cylinder) | 1 |
| 11***70 | Hose As | 1 |
1g-7882 Hydraulic Ar-Elevation
| 10***56 | Hose As | 1 |
| 10***57 | Hose As | 1 |
| 1G***82 | Hydraulic Ar-Elevation | 1 |
1g-7883 Hydraulic Ar-Enclosure
| 10***19 | Clamp-Half | 26 |
| 10***57 | Connector | 1 |
| 11***75 | Hose As | 2 |
250-4612 Hydraulic Ar-Fan
| 08***91 | Adapter | 1 |
| 10***18 | Hose As | 1 |
| 10***19 | Hose As | 1 |
131-8747 Hydraulic Ar-Front Door
| 10***19 | Clamp-Half | 6 |
| 10***38 | Clamp-Half | 4 |
| 10***80 | Block | 1 |
1g-7885 Hydraulic Ar-Moldboard
| 10***89 | Hose As | 1 |
| 10***90 | Hose As | 1 |
| 10***91 | Hose As | 1 |
1g-7884 Hydraulic Ar-Rear Door
| 10***89 | Hose As | 1 |
| 10***90 | Hose As | 1 |
| 10***91 | Hose As | 1 |
112-9872 Hydraulic Ar-Side Plate
| 11***72 | Hydraulic Ar-Side Plate | 1 |
| 14***55 | Connector As | 1 |
| 14***52 | Elbow As. | 1 |
1g-7887 Hydraulic Ar-Tensioner
| 10***05 | Valve Group-Check; (Coolant Lines) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***73 | Elbow Group | 1 |
1g-7921 Lines Gp-Auxiliary Hydraulic -Rotor
| 10***45 | Hose As | 1 |
| 10***13 | Hose As | 1 |
| 10***05 | Valve Group-Check; (Coolant Lines) | 1 |
246-4757 Lines Gp-Auxiliary Hydraulic
| 09***67 | Hose As | 2 |
| 10***39 | Hose As | 1 |
| 24***57 | Lines Group-Auxiliary Hydraulic | 1 |
194-6087 Lines Gp-Conveyor
| 09***57 | Hose As | 2 |
| 19***87 | Lines Group-Conveyor | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
119-1501 Lines Gp-Door Cylinder
| 10***37 | Valve Group-Check; (Front Auxiliary Manifold) | 2 |
| 10***38 | Valve Group-Check; (Mixing Chamber Tilt Cylinder) | 2 |
| 10***93 | Hose As | 1 |
246-5040 Lines Gp-Hydraulic -Conveyor
| 10***21 | Hose As | 1 |
| 10***57 | Hose As | 1 |
| 10***86 | Hose As | 1 |
119-1148 Lines Gp-Hydraulic -Water Spray Pump
| 10***37 | Valve Group-Check; (Front Auxiliary Manifold) | 2 |
| 10***94 | Hose As | 1 |
| 11***48 | Lines Group-Hydraulic; -Water Spray Pump | 1 |
246-4613 Lines Gp-Hydraulic -Conveyor
| 09***60 | Hose As | 2 |
| 10***40 | Valve-Check | 1 |
| 10***73 | Hose As | 2 |
268-6665 Lines Gp-Hydraulic -Auxiliary
| 10***21 | Hose As | 1 |
| 10***57 | Hose As | 1 |
| 10***86 | Hose As | 1 |
246-4711 Lines Gp-Hydraulic -Clutch
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 16***63 | Adapter Assembly | 2 |
| 24***11 | Lines Group-Hydraulic; -Clutch | 1 |
246-5047 Lines Gp-Hydraulic Fan
| 14***53 | Valve Group-Check | 2 |
| 14***27 | Hose As | 1 |
| 14***28 | Hose As | 1 |
246-4712 Lines Gp-Hydraulic Oil Cooler
| 10***38 | Valve Group-Check; (Mixing Chamber Tilt Cylinder) | 1 |
| 10***50 | Hose As, . Casing; Pump | 1 |
| 10***51 | Hose As | 1 |
246-4754 Lines Gp-Hydraulic Oil Cooler
| 10***81 | Plate As | 1 |
| 24***54 | Lines Group-Hydraulic Oil Cooler | 1 |
| 3B***06 | Washer,Lock; Flange,Elbow,Clamp Assembly,Tube To Pump,Tube Assembly To Screen,Clip Mounting,And Tube Assembly To Transmission | 4 |
194-6092 Lines Gp-Lift Cylinder -Elevation
| 03***28 | Seal-O-Ring | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 10***17 | Seal-O-Ring | 3 |
1g-7909 Lines Gp-Lift Cylinder -Engine Enclosure
| 10***81 | Plate As | 1 |
| 1G***09 | Lines Group-Lift Cylinder; -Engine Enclosure | 1 |
| 31***83 | Shaft-Drive | 1 |
1g-7912 Lines Gp-Lift Cylinder -Rear Door
| 11***43 | Ring-Retaining | 2 |
| 11***51 | Ball | 1 |
| 11***52 | Spring | 1 |
101-4301 Lines Gp-Lift Cylinder -Conveyor
| 10***01 | Lines Group-Lift Cylinder; -Conveyor | 1 |
| 24***74 | Bolt; (M14x2x160-mm) | 4 |
| 24***31 | Kit-Gear; (Conveyor Motor) | 1 |
1g-7914 Lines Gp-Lift Cylinder -Moldboard
| 1G***14 | Lines Group-Lift Cylinder; -Moldboard | 1 |
| 24***74 | Bolt; (M14x2x160-mm) | 4 |
| 24***08 | Kit-Shaft; (Conveyor Motor) | 1 |
132-3923 Lines Gp-Lift Cylinder -Front Door
| 05***50 | Seal | 3 |
| 07***21 | Flange-Mounting | 1 |
| 08***43 | Drive | 1 |
246-5041 Lines Gp-Pressure Test
| 03***28 | Seal-O-Ring | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 10***17 | Seal-O-Ring | 3 |
246-4756 Lines Gp-Return
| 14***39 | Ring-Retaining | 1 |
| 15***66 | Bolt-Socket Head; (M14x2x65-mm) | 2 |
| 15***33 | Key | 1 |
194-6090 Lines Gp-Swing Cylinder -Conveyor
| 10***20 | Seal-O-Ring | 1 |
| 19***90 | Lines Group-Swing Cylinder; -Conveyor | 1 |
| 19***71 | Pump Group-Gear; -Conveyor | 1 |
1g-7918 Lines Gp-Tensioner Cylinder
| 08***71 | Pump Group-Piston; -Propel | 1 |
| 1G***18 | Lines Group-Tensioner Cylinder | 1 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
1g-7922 Motor & Mtg Gp-Auxiliary
| 1G***22 | Motor & Mtg Group-Auxiliary | 1 |
| 27***57 | Pump Group-Gear; -Hydraulic Fan | 1 |
| 2H***34 | Seal Transfer Pump To Plate | 1 |
316-5469 Motor Gp-Gear -Water Spray Pump
| 1G***12 | Pump Group-Gear; -Clutch | 1 |
| 31***69 | Motor Group-Gear; -Water Spray Pump | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
190-8765 Motor Gp-Gerotor -Conveyor
| 10***57 | Gear-Drive | 1 |
| 10***58 | Plate-Pressure | 1 |
| 10***59 | Dowel | 4 |
190-5997 Motor Gp-Gerotor -Conveyor
| 10***54 | Flange | 1 |
| 10***55 | Housing-Gear | 1 |
| 10***56 | Cover-Rear | 1 |
7r-7209 Motor Gp-Hydraulic -Rotor
| 10***58 | Plate-Pressure | 4 |
| 10***59 | Dowel | 8 |
| 10***18 | Gear-Idler | 1 |
261-9255 Motor Gp-Piston
| 08***19 | Pin | 1 |
| 16***93 | Coupling | 1 |
| 16***19 | Seal-Shaft | 1 |
142-9937 Motor Gp-Piston -Propel
| 03***05 | Seal-O-Ring | 2 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
142-9934 Motor Gp-Piston -Propel
| 09***93 | Bolt-Socket Head; (M14x2x105-mm) | 4 |
| 14***34 | Motor Group-Piston; -Propel | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
1g-9813 Pump & Motor Gp-Hydraulic
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
201-8087 Pump & Mtg Gp-Conveyor & Fan
| 11***16 | Screw | 14 |
| 13***83 | Pin-Center | 1 |
| 13***84 | Piston | 7 |
1g-7923 Pump & Mtg Gp-Electric Drive
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***81 | Spring | 1 |
246-4707 Pump & Mtg Gp-Hydraulic -Propel
| 11***63 | Tube As | 1 |
| 13***20 | Valve | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
246-5044 Pump & Mtg Gp-Hydraulic
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 14***05 | Adapter Group | 1 |
258-6723 Pump & Mtg Gp-Hydraulic -Clutch
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
| 25***23 | Pump & Mtg Group-Hydraulic; -Clutch | 1 |
| 26***18 | Valve Group-Bank 1; -Hydraulic Fan | 1 |
1g-8112 Pump Gp-Gear -Clutch
| 11***16 | Film-Instruction; (Lift Cylinder) | 2 |
| 13***54 | Valve Group-Pressure Control; (Pressure Reducing) | 1 |
| 1G***12 | Pump Group-Gear; -Clutch | 1 |
277-9757 Pump Gp-Gear -Hydraulic Fan
| 14***38 | Elbow | 1 |
| 14***25 | Connector As. | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
199-5671 Pump Gp-Gear -Conveyor
| 14***02 | Valve Group-Control; -Boost Manifold, Needle Roller | 1 |
| 19***71 | Pump Group-Gear; -Conveyor | 1 |
| 8T***96 | Washer-Hard- Line From Pipe As. To Gear | 2 |
086-9871 Pump Gp-Piston -Propel
| 08***71 | Pump Group-Piston; -Propel | 1 |
| 12***76 | Kit-Seal; (Counterbalance Valve) | 2 |
| 14***62 | Valve Group-Counterbalance | 2 |
260-1529 Pump Gp-Piston -Propel
| 10***06 | Valve-Directional; (Enclosure Door) | 1 |
| 11***90 | Kit-Bolt; (Pressure Reducing Valve) | 1 |
| 13***70 | Kit-Seal; (Pressure Reducing Valve) | 1 |
324-5917 Pump Gp-Piston -Propel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
137-4581 Rotating Gp-Motor -Propel
| 13***81 | Rotating Group-Motor; -Propel | 1 |
| 1G***09 | Valve Group-Front; -Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
279-2486 Rotating Gp-Pump
| 1G***29 | Valve Group-Solenoid; -Moldboard | 1 |
| 27***86 | Rotating Group-Pump; -Implement, Hydraulic Fan | 1 |
| 2N***31 | Elbow-Pipe (45 Degree) | 1 |
247-9910 Tank & Mtg Gp-Hydraulic -Rotor Clutch
| 24***10 | Tank & Mtg Group-Hydraulic; -Rotor Clutch | 1 |
| 26***31 | Kit-Seal; (Solenoid Valve, Fan) | 1 |
| 26***32 | Coil-Solenoid | 1 |
246-5127 Tank & Mtg Gp-Hydraulic
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 1G***11 | Valve Group-Rear; -Manifold | 1 |
249-5623 Tank Gp-Hydraulic
| 21***75 | Seal-O-Ring | 1 |
| 24***54 | Collar-Locking | 1 |
| 24***23 | Tank Group-Hydraulic | 1 |
246-5046 Valve & Mtg Gp-Bank -Hydraulic Fan
| 10***01 | Valve Group-Pressure Reducing; (Second Stage Conveyor) | 1 |
| 10***18 | Coil | 2 |
| 14***91 | Valve-Solenoid; (First Stage Conveyor) | 1 |
1g-9806 Valve & Mtg Gp-Center -Manifold
| 10***08 | Valve-Directional; (Auxiliary Cutter) | 1 |
| 10***09 | Kit-Bolt | 2 |
| 10***10 | Valve Group-Relief | 1 |
112-9874 Valve & Mtg Gp-Control
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 11***74 | Valve & Mtg Group-Control | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
246-5039 Valve & Mtg Gp-Conveyor Speed
| 10***31 | Manifold-Inlet | 1 |
| 10***32 | Kit-Seal; (Inlet Manifold Relief Valve) | 1 |
| 10***36 | Cover | 1 |
141-5904 Valve & Mtg Gp-Conveyor Speed
| 14***04 | Valve & Mtg Group-Conveyor Speed | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
195-3903 Valve & Mtg Gp-Conveyor Swing
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 13***22 | Valve Group-Counterbalance | 1 |
| 13***23 | Valve Group-Counterbalance | 1 |
132-3929 Valve & Mtg Gp-Door
| 10***35 | Valve-Solenoid | 1 |
| 13***29 | Valve & Mtg Group-Door | 1 |
| 14***70 | Coil-Solenoid | 1 |
246-4709 Valve & Mtg Gp-Flow Divider
| 17***13 | Seal-O-Ring | 1 |
| 18***67 | Seal-O-Ring | 2 |
| 21***87 | Seal-O-Ring | 8 |
1g-9805 Valve & Mtg Gp-Front
| 1G***05 | Valve & Mtg Group-Front | 1 |
1g-7913 Valve & Mtg Gp-Moldboard
| 10***17 | Seal-O-Ring | 2 |
| 12***91 | Plug | 2 |
| 12***96 | Valve-Piston | 1 |
1g-9807 Valve & Mtg Gp-Rear
| 10***09 | Kit-Bolt | 2 |
| 10***23 | Valve-Check | 2 |
| 11***90 | Kit-Bolt; (Pressure Reducing Valve) | 2 |
262-7718 Valve Gp-Bank 1 -Hydraulic Fan
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***08 | Gasket-Control | 1 |
| 26***18 | Valve Group-Bank 1; -Hydraulic Fan | 1 |
273-6541 Valve Gp-Bank 1
| 10***86 | Seal-O-Ring | 1 |
| 14***98 | Nut-Hex; (M20x1-Thd) | 1 |
| 27***41 | Valve Group-Bank 1 | 1 |
257-0054 Valve Gp-Bank 3 -Conveyor Speed
| 25***54 | Valve Group-Bank 3; -Conveyor Speed | 1 |
| 8C***85 | Seal-O-Ring; (7.65mm Id) | 3 |
| 8T***42 | Bolt-Socket Hd; (M6 X 1.0 X 30) | 4 |
1g-9810 Valve Gp-Center -Manifold
| 10***06 | Valve-Directional; (Enclosure Door) | 1 |
| 10***09 | Kit-Bolt | 2 |
| 10***12 | Valve-Relief; (Rear Steering) | 2 |
6e-6042 Valve Gp-Check
| 10***78 | Orifice-Plug | 1 |
| 10***80 | Valve As-Relief | 1 |
| 10***81 | Valve As-Pressure Reducing | 1 |
143-3653 Valve Gp-Check
| 14***53 | Valve Group-Check | 1 |
| 7R***09 | Shaft As | 1 |
| 8C***13 | Washer-Hard; (24x41.5x4-mm Thk) | 6 |
141-5902 Valve Gp-Control -Boost Manifold
| 08***37 | Hub | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
132-3931 Valve Gp-Control -Counterbalance
| 13***31 | Valve Group-Control; -Counterbalance | 1 |
| 19***56 | Support As | 1 |
| 19***94 | Bearing Group-Self-Aligning | 1 |
5e-4755 Valve Gp-Control -Pressure Reducing
| 06***60 | Screw-Axle Pin | 1 |
| 24***64 | Ball Bearing | 1 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 1 |
241-4551 Valve Gp-Flow Divider
| 17***34 | Pin As | 1 |
| 17***84 | Pivot As-Upper | 1 |
| 18***00 | Spreader As | 1 |
139-7747 Valve Gp-Flushing -Propel Motor
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 05***26 | Bolt-Socket Head | 6 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
139-3269 Valve Gp-Flushing -Propel Motor
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 2 |
| 05***26 | Bolt-Socket Head | 6 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
1g-9809 Valve Gp-Front -Manifold
| 10***84 | Bracket | 1 |
| 10***46 | Control Group-Backup | 1 |
| 1G***09 | Valve Group-Front; -Manifold | 1 |
288-8633 Valve Gp-Pump Control
| 17***78 | Mounting Group-Conveyor | 1 |
| 17***92 | Conveyor Group-Second Stage | 1 |
| 19***84 | Cable Group-Conveyor | 1 |
274-8739 Valve Gp-Pump Control
| 19***11 | Conveyor Group-First Stage | 1 |
| 19***59 | Mounting Group-Conveyor | 1 |
| 1G***72 | Spray Group-Water; -Conveyor | 1 |
1g-9200 Valve Gp-Pump Control -Propel Piston Pump
| 10***99 | Support As | 1 |
| 10***01 | Tube As | 1 |
| 10***04 | Plate | 2 |
1g-9811 Valve Gp-Rear -Manifold
| 08***84 | Bolt-Adjustment | 2 |
| 11***59 | Plate | 2 |
| 12***62 | Kit-Bushing; (Pulley) | 2 |
1g-7529 Valve Gp-Solenoid -Moldboard
| 08***84 | Bolt-Adjustment | 2 |
| 11***59 | Plate | 2 |
| 11***94 | Screw-Pan Head; (1/4-20x0.5-In) | 9 |
Implements
1g-8032 Bearing Gp-Rotor
| 12***62 | Kit-Bushing; (Pulley) | 2 |
| 17***86 | Guard As | 1 |
| 17***54 | Frame As | 1 |
199-6594 Bearing Gp-Self-Aligning
| 17***72 | Cover As | 1 |
| 17***74 | Cover As | 1 |
| 17***75 | Cover | 1 |
199-6593 Belt Tightener Gp -Conveyor
| 08***38 | Plate-Wear | 3 |
| 18***76 | Door As | 1 |
| 19***43 | Deflector | 2 |
244-1914 Belt Tightener Gp
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 16 |
| 13***98 | Cone-Special | 1 |
| 13***71 | Hub | 1 |
192-0884 Cable Gp-Conveyor
| 13***26 | Plate-Drive | 1 |
| 13***86 | Drive Group-Rotor | 1 |
| 19***84 | Cable Group-Conveyor | 1 |
264-3903 Chamber Gp-Rotor
| 10***06 | Valve Group-Relief; -Hydraulic Clutch | 1 |
| 26***03 | Chamber Group-Rotor | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
332-2732 Chamber Gp-Rotor
| 33***32 | Chamber Group-Rotor | 1 |
| 33***28 | Valve Group-Relief; -Hydraulic Clutch | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
1g-9504 Control Gp-Backup
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1G***04 | Control Group-Backup | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
109-3946 Control Gp-Backup
| 10***46 | Control Group-Backup | 1 |
| 17***28 | Tightener | 2 |
| 17***56 | Roller Group-Conveyor | 4 |
201-1551 Conveyor Ar-First Stage
| 19***15 | Roller Group-Conveyor | 1 |
| 19***16 | Roller Group-Conveyor | 3 |
| 20***51 | Conveyor Ar-First Stage | 1 |
184-2415 Conveyor Ar-Second Stage
| 18***15 | Conveyor Ar-Second Stage | 1 |
| 25***07 | Housing-Rotating; (Clutch) | 1 |
| 3D***03 | Plug-Pipe; (1/16-27 Nptf Thd) | 1 |
190-1211 Conveyor Gp-First Stage
| 10***16 | Filter & Mtg Group-Clutch | 1 |
| 19***11 | Conveyor Group-First Stage | 1 |
| 24***11 | Lines Group-Hydraulic; -Clutch | 1 |
179-2192 Conveyor Gp-Second Stage
| 11***49 | Bearing | 1 |
| 11***50 | Pointer | 1 |
| 11***51 | Bar | 1 |
177-7576 Cover Gp-Conveyor
| 09***46 | Hose Assem. | 1 |
| 10***38 | Hose As | 1 |
| 10***68 | Adapter | 1 |
189-5173 Door Gp-Chamber
| 10***38 | Hose As | 1 |
| 10***88 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
132-7386 Drive Gp-Rotor
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 08***28 | Plate | 2 |
| 08***34 | Rod | 2 |
170-3782 Drive Gp-Rotor
| 17***82 | Drive Group-Rotor | 1 |
| 19***65 | Motor Group-Gerotor; -Conveyor | 1 |
| 19***87 | Coupling | 1 |
340-7087 Filter & Mtg Gp-Clutch
| 16***48 | Bolt; (M12x1.75x55-mm) | 2 |
| 19***01 | Link | 4 |
| 1H***82 | Pin | 4 |
103-6316 Filter & Mtg Gp-Clutch
| 08***41 | Plate | 1 |
| 10***16 | Filter & Mtg Group-Clutch | 1 |
| 13***37 | Shim; (0.8-mm Thk)(.8mm Thk) | 3 |
6p-4603 Filter Gp-Oil -Hydraulic Clutch
| 11***92 | Bearing-Sleeve | 2 |
| 17***15 | Pivot As | 1 |
| 4V***57 | Bearing-Spherical | 2 |
179-0646 Frame As-Conveyor
| 17***46 | Frame As-Conveyor | 1 |
| 18***64 | Rod | 2 |
| 5H***93 | Pin (1.25" Long) | 4 |
305-9016 Frame Gp-Conveyor
| 13***29 | Seal-O-Ring | 2 |
| 16***48 | Plug As | 1 |
| 16***23 | Housing-Pulley | 1 |
251-8313 Housing Gp-Clutch
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 16***23 | Housing-Pulley | 1 |
| 18***63 | Plug Group | 1 |
250-4608 Hydraulic Ar-Clutch
| 23***40 | Clip | 2 |
| 23***63 | Clip-End | 2 |
| 23***64 | Screw-Special | 2 |
179-2233 Idler Gp-Conveyor
| 17***33 | Idler Group-Conveyor | 1 |
| 23***63 | Clip-End | 2 |
| 23***64 | Screw-Special | 2 |
113-1063 Indicator Gp-Depth
| 11***63 | Indicator Group-Depth | 1 |
| 23***38 | Roller | 2 |
| 23***39 | Roller | 1 |
119-1227 Lines Gp-Motor
| 11***66 | Spray Group-Water; -Mixing Chamber | 1 |
| 11***27 | Lines Group-Motor | 1 |
| 13***60 | Wiring Group-Rotor | 1 |
087-0120 Moldboard Gp
| 08***20 | Moldboard Group | 1 |
| 15***44 | Plate | 12 |
| 15***68 | Stud-Wheel | 12 |
185-4081 Motor & Mtg Gp-Conveyor
| 18***81 | Motor & Mtg Group-Conveyor | 1 |
| 1G***92 | Brake Group; -Rotor | 1 |
| 24***11 | Shaft Group-Drive | 1 |
178-5278 Mounting Gp-Conveyor
| 12***93 | Rotor As | 1 |
| 14***64 | Bit As-Cutting | 147 |
| 17***78 | Mounting Group-Conveyor | 1 |
191-4859 Mounting Gp-Conveyor
| 14***64 | Bit As-Cutting | 170 |
| 15***41 | Holder Group-Bit | 154 |
| 19***59 | Mounting Group-Conveyor | 1 |
180-6154 Pivot Gp-Conveyor
| 09***84 | Pin-Spring | 173 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 36 |
| 13***50 | Nut; (M18x2.5) | 36 |
187-9263 Plate Gp-Rotor
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 18***63 | Plate Group-Rotor | 1 |
| 1A***06 | Bolt--Neutral Connection | 8 |
244-1913 Pulley Gp-Lower
| 24***13 | Pulley Group-Lower | 1 |
| 25***05 | Valve Group-Clutch | 1 |
| 4J***40 | Seal-O-Ring (Id=18.64mm) | 2 |
244-1912 Pulley Gp-Upper
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 3 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 10***16 | Seal-O-Ring | 2 |
190-1216 Roller Gp-Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***91 | Valve Kit; (Tc Lockup Clutch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
190-1215 Roller Gp-Conveyor
| 19***15 | Roller Group-Conveyor | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
179-0657 Roller Gp-Conveyor
| 17***57 | Roller Group-Conveyor | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
179-0656 Roller Gp-Conveyor
| 10***12 | Valve-Relief; (Rear Steering) | 1 |
| 10***13 | Valve-Relief; (Rear Steering) | 1 |
| 17***56 | Roller Group-Conveyor | 1 |
264-3822 Rotor Ar
| 00***40 | Connector; (Flared) | 1 |
| 03***85 | Elbow | 1 |
| 08***82 | Nipple-Reducer | 1 |
194-6855 Rotor As
| 10***76 | Filter Group-Air | 1 |
| 11***80 | Tank Group-Air | 1 |
| 19***55 | Rotor As | 1 |
250-4603 Rotor Drive Ar
| 08***44 | Reservoir | 2 |
| 1P***97 | Valve-Drain; (Radiator) | 2 |
| 25***03 | Rotor Drive Ar | 1 |
194-6854 Rotor Gp
| 00***41 | Elbow-Pipe | 2 |
| 14***86 | Valve | 1 |
| 16***75 | Filter Group-Water | 1 |
130-0057 Rotor Gp
| 13***57 | Rotor Group | 1 |
| 18***98 | Screen | 1 |
| 18***07 | Gasket-Strainer | 1 |
243-5614 Rotor Gp
| 08***08 | Fitting | 2 |
| 08***23 | Fitting | 1 |
| 08***57 | Elbow | 1 |
244-1911 Shaft Gp-Drive
| 24***11 | Shaft Group-Drive | 1 |
| 4S***99 | Str. Connector, 1/4in. J.I.C. X 1/4in. N.P.T. | 4 |
| 5R***61 | Fitting As | 1 |
264-5129 Valve & Mtg Gp-Clutch
| 00***07 | Elbow; (90 Degree) | 1 |
| 16***51 | Lines Group-Water Filter | 1 |
| 26***29 | Valve & Mtg Group-Clutch | 1 |
258-7605 Valve Gp-Clutch
| 00***99 | Tee To Bushing | 1 |
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
1g-9812 Valve Gp-Relief -Hydraulic Steering
| 00***99 | Tee To Bushing | 1 |
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
109-5206 Valve Gp-Relief -Hydraulic Clutch
| 10***62 | Coupling-Pump | 1 |
| 10***63 | Coupling-Center | 1 |
| 10***06 | Valve Group-Relief; -Hydraulic Clutch | 1 |
337-5228 Valve Gp-Relief -Hydraulic Clutch
| 11***33 | Pump Group-Water Spray | 1 |
| 33***28 | Valve Group-Relief; -Hydraulic Clutch | 1 |
| 3B***67 | Cock- Drain -To Cover | 1 |
214-4040 Valve Gp-Solenoid -Tc Lockup Clutch
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***63 | Elbow Group | 1 |
| 15***37 | Tee As. | 1 |
Lubrication System
176-1363 Base Gp-Oil Filter -Engine
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 17***63 | Base Group-Oil Filter; -Engine | 1 |
200-0655 Base Gp-Oil Filter -Engine
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 20***55 | Base Group-Oil Filter; -Engine | 1 |
| 4D***80 | Grommet 5.72 cm(2.25 In.) Long | 1 |
200-0654 Base Gp-Oil Filter
| 16***22 | Clip-Loop | 1 |
| 20***54 | Base Group-Oil Filter | 1 |
| 20***28 | Hose As; (Fumes Disposal) | 1 |
234-2916 Breather Gp -Crankcase
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 23***16 | Breather Group; -Crankcase-Valve Mechanism | 2 |
| 23***63 | Hose-Disposal; (Fumes) | 1 |
4n-2481 Fastener Gp-Oil Pump Mounting -Engine
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
| 16***70 | Plug | 3 |
200-0653 Filter Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 10***72 | Seal-O-Ring; (40.64-mm Id) | 1 |
246-4679 Fumes Disposal Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
275-8898 Fumes Disposal Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
159-9362 Fumes Disposal Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
290-4845 Gauge Gp-Oil Level (Dipstick)
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
207-8052 Gauge Gp-Oil Level (Dipstick) -Engine
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
227-3917 Lines Gp-Engine Oil -Oil Pan
| 12***56 | Cover As-Pump | 1 |
| 1M***44 | Bolt; (3/8-16x2-1/4 In) | 2 |
| 1W***38 | Shaft As-Pump Drive; (8-Teeth) | 1 |
291-6821 Lines Gp-Engine Oil -Oil Pan
| 01***24 | Bushing To Supply Port | 1 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
242-0791 Lines Gp-Turbocharger Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***30 | Bearing As-Roller | 1 |
| 12***17 | Seal Group; (Water Pump) | 1 |
161-4113 Pump Gp-Engine Oil
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 10 |
| 05***33 | Mounting-Engine | 4 |
| 16***13 | Pump Group-Engine Oil | 1 |
Machine Arrangement
250-4602 Chassis Ar
| 10***93 | Track Group | 1 |
| 11***46 | Lighting Group-Warning Beacon | 1 |
| 11***96 | Indicator Group-Steering | 1 |
250-4601 General Ar
| 11***72 | Hydraulic Ar-Side Plate | 1 |
| 13***47 | Hydraulic Ar-Front Door | 1 |
| 13***47 | Spray Ar-Water | 1 |
Operator Station
264-5724 Console Gp-Operator
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***56 | Film-Instruction; (Transmission Fluid) | 1 |
| 10***22 | Film-Instruction; (Hydraulic Oil Level) | 1 |
1g-7784 Control Gp-Speed
| 1G***84 | Control Group-Speed | 1 |
| 22***69 | Plate-Identification; (C18 Acert) | 1 |
| 23***00 | Plate-Identification; (Blank) | 1 |
133-9896 Door Gp-Storage
| 13***96 | Door Group-Storage | 1 |
| 30***72 | Plate-Identification; (Cat C18 Acert) | 1 |
117-8323 Guard Gp-Controls
| 10***91 | Punch; (Bit Removal) | 1 |
| 11***23 | Guard Group-Controls | 1 |
| 14***74 | Tool Group | 1 |
178-9270 Lever Gp-Conveyor Control
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 17***70 | Lever Group-Conveyor Control | 1 |
| 22***80 | Hammer-Air | 1 |
218-0258 Mirror Gp-Rear View
| 21***58 | Mirror Group-Rear View | 1 |
262-7239 Mounting Gp
| 26***39 | Mounting Group | 1 |
250-4605 Operator Ar
| 25***05 | Operator Ar | 1 |
135-0341 Panel Gp-Instrument -Operator
| 13***41 | Panel Group-Instrument; -Operator | 1 |
133-1784 Platform Gp-Operator -Side, Rh
| 13***84 | Platform Group-Operator; -Side, Rh | 1 |
246-4695 Platform Gp-Operator -Main
| 24***95 | Platform Group-Operator; -Main | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
Power Train
247-9997 Clutch Gp
| 1G***70 | Door Group-Access; -Rear | 1 |
| 1G***97 | Latch Group; -Rear | 1 |
| 24***97 | Clutch Group | 1 |
1g-7799 Filter & Mtg Gp-Hydraulic
| 1G***99 | Filter & Mtg Group-Hydraulic | 1 |
| 1G***97 | Latch Group; -Rear | 1 |
| 25***23 | Hood Group | 1 |
250-4609 Hydraulic Ar-Propel
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 24***17 | Frame As | 1 |
246-4708 Lines Gp-Hydrostatic
| 08***01 | Insert | 4 |
| 08***00 | Hinge Group-Steering | 2 |
| 12***36 | Strut As | 1 |
142-9933 Motor & Mtg Gp-Propel
| 10***29 | Plate As | 1 |
| 13***98 | Guard As | 1 |
| 14***33 | Motor & Mtg Group-Propel | 1 |
168-6959 Planetary Gp-Final Drive
| 10***29 | Plate As | 1 |
| 16***59 | Planetary Group-Final Drive | 1 |
| 1G***77 | Plate Group | 1 |
246-4752 Pump & Mtg Gp-Propel
| 24***52 | Pump & Mtg Group-Propel | 1 |
| 25***46 | Sheet As | 1 |
| 25***18 | Sheet As | 1 |
Service Equipment And Supplies
269-6933 Film Gp
| 26***33 | Film Group | 1 |
246-4537 Plate & Film Gp
| 24***37 | Plate & Film Group | 1 |
224-3979 Plate Gp-Engine Identification -C18 Acert
| 22***79 | Plate Group-Engine Identification; -C18 Acert | 1 |
164-5991 Tool Gp
| 16***91 | Tool Group | 1 |
232-3681 Tool Gp-Hand
| 23***81 | Tool Group-Hand | 1 |
Steering System
1g-9332 Control Gp-Steering
| 1G***32 | Control Group-Steering | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2J***61 | Ring-Retaining | 1 |
1g-7785 Control Gp-Steering
| 1G***85 | Control Group-Steering | 1 |
| 1G***99 | Pump Group-Metering; -Steering | 1 |
104-1757 Cylinder & Mtg Gp-Steering
| 10***57 | Cylinder & Mtg Group-Steering | 1 |
| 1U***76 | Pin | 2 |
| 20***07 | Cylinder Group-Hydraulic; -Conveyor | 1 |
1g-7902 Cylinder & Mtg Gp-Steering
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 13***17 | Pin As | 4 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
087-0500 Hinge Gp-Steering
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 08***00 | Hinge Group-Steering | 1 |
| 13***34 | Cylinder Group-Hydraulic; -Front Door | 2 |
1g-7881 Hydraulic Ar-Steering
| 1B***18 | Nut-Castle | 1 |
| 1G***81 | Hydraulic Ar-Steering | 1 |
| 20***20 | Pin As | 1 |
111-3196 Indicator Gp-Steering
| 11***96 | Indicator Group-Steering | 1 |
| 1B***18 | Nut-Castle | 1 |
| 20***20 | Pin As | 1 |
1g-7901 Lines Gp-Steering
| 08***00 | Cylinder Group-Hydraulic; -Hood Tilt | 1 |
| 1G***01 | Lines Group-Steering | 1 |
| 3B***31 | Pin-Cotter | 2 |
1g-7778 Link Gp-Steering
| 11***48 | Cylinder Group-Hydraulic; -Side Plate | 4 |
| 1G***78 | Link Group-Steering | 1 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 8 |
1g-8599 Pump Gp-Metering -Steering
| 1G***99 | Pump Group-Metering; -Steering | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
| 20***36 | Cylinder Group-Hydraulic; -Tensioner | 1 |
1g-7776 Steering Gp-Mechanical
| 10***51 | Valve; (Lock) | 1 |
| 10***65 | Kit-Seal; (Mixing Chamber Tilt Cylinder) | 1 |
| 1G***76 | Steering Group-Mechanical | 1 |
1g-7900 Valve & Mtg Gp-Relief
| 03***39 | Ring-Back-Up | 1 |
| 06***00 | Plug | 2 |
| 16***04 | Seal-U-Cup | 2 |
1g-7899 Valve & Mtg Gp-Steering
| 10***97 | Kit-Seal; (Hood Tilt Cylinder) | 1 |
| 10***51 | Valve; (Lock) | 2 |
| 11***07 | Seal-Piston | 2 |
Water System
160-2375 Filter Gp-Water
| 11***47 | Pump & Lines Group-Water Spray | 1 |
| 11***48 | Lines Group-Hydraulic; -Water Spray Pump | 1 |
| 16***75 | Filter Group-Water | 1 |
164-3251 Lines Gp-Water Filter
| 00***98 | Elbow (For Use With Deep Pan) | 1 |
| 00***15 | Insert | 4 |
| 10***49 | Plate | 2 |
1g-8385 Lines Gp-Water Spray
| 00***98 | Elbow (For Use With Deep Pan) | 1 |
| 00***15 | Insert | 4 |
| 10***49 | Plate | 2 |
136-8049 Lines Gp-Water Spray -Mixing Chamber
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 13***49 | Lines Group-Water Spray; -Mixing Chamber | 1 |
8c-1679 Lines Gp-Water Spray
| 11***69 | Connector-Male | 5 |
| 11***70 | Connector-Male | 7 |
| 1G***70 | Body-Nozzle | 12 |
119-1147 Pump & Lines Gp-Water Spray
| 00***46 | Elbow; (45 Degree Pipe) | 1 |
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 01***24 | Bushing To Supply Port | 1 |
217-7396 Pump & Motor Gp-Water Spray
| 09***51 | Bearing-Sleeve | 2 |
| 0L***70 | Handle-Lever | 2 |
| 1G***52 | Plate | 2 |
311-1934 Pump Gp-Water Spray
| 26***27 | Support | 1 |
| 26***03 | Jaw | 2 |
| 26***09 | Screw-Flat Head; (M5x0.8x10-mm) | 4 |
115-4333 Pump Gp-Water Spray
| 11***33 | Pump Group-Water Spray | 1 |
| 17***08 | Block-Contact | 2 |
| 17***09 | Block-Contact | 2 |
115-4331 Pump Gp-Water Spray
| 11***31 | Pump Group-Water Spray | 1 |
| 17***55 | Latch | 1 |
| 17***74 | Door As | 1 |
200-6366 Pump Gp-Water Spray
| 11***90 | Washer; (11.1x37.9x3.3-mm Thk) | 2 |
| 20***66 | Pump Group-Water Spray | 1 |
| 21***09 | Mirror-Convex | 2 |
136-8047 Spray Ar-Water
| 03***17 | Screw-Button Head; (3/8-16x1-In) | 13 |
| 08***49 | Cable As | 1 |
| 12***02 | Tape; (900-cm) | 0 |
119-1043 Spray Ar-Water
| 11***23 | Guard Group-Controls | 1 |
| 11***43 | Spray Ar-Water | 1 |
| 12***22 | Ladder Group | 1 |
1g-8272 Spray Gp-Water -Conveyor
| 10***05 | Bolt-Shoulder | 2 |
| 13***85 | Platform As | 1 |
| 13***87 | Handrail As | 1 |
115-9966 Spray Gp-Water -Mixing Chamber
| 11***66 | Spray Group-Water; -Mixing Chamber | 1 |
| 33***08 | Software Group-Communication; (Product Link 121sr) | 1 |
116-2001 Strainer Gp-Water
| 08***29 | Film-Warning; (Support Legs, Read Omm) | 4 |
| 08***30 | Film-Warning; (Door) | 2 |
| 08***83 | Film-Conveyor; (Shipping Instructions) | 2 |
164-4297 Valve Gp-Manual -Water Spray
| 08***29 | Film-Warning; (Support Legs, Read Omm) | 4 |
| 08***30 | Film-Warning; (Door) | 2 |
| 08***83 | Film-Conveyor; (Shipping Instructions) | 2 |
PM-201 serial number reference
The PIN plate on a PM-201 is mounted on the machine frame near the operator station/left rear of the chassis, same general area as other Cat cold planers; it is also stamped on the frame rail itself as a backup. Read the first three characters of the PIN as the serial-number prefix (identifies model/build series), and the digits after it as the sequential unit number within that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| PNM | PM-201 cold planer, C18 ACERT engine | Full-load engine rating is in the 625-650 hp (466-485 kW) range depending on gross vs net rating; treat as the general PM-201 prefix. No engine or rotor-configuration split tied to this prefix in available sources; confirm exact build year with a dealer PIN lookup. |
Frequently asked questions
What engine powers the Cat PM-201 cold planer?
A Cat C18 ACERT diesel rated at 625 hp net and 650 hp gross, the same engine family used across the closely related PM-200.
What is the PM-201's operating weight?
Roughly 86,360 lb (39,165 kg) in a full conical-rotor configuration, with front/rear track loading near 47,500 lb (21,545 kg) front and 38,860 lb (17,627 kg) rear. Exact weight varies with conical, breakaway, or weld-on rotor tooling choice.
What replaced the Cat PM-201?
No single model is clearly documented as a direct, named successor. The PM-201 ran a short production window on the same C18 half-lane platform as the PM-200, and Cat's later half-lane cold planer generations carried the class forward from there. Verify current cross-reference with your Cat dealer.
What PM-201 owners discuss
How does the C18 ACERT engine hold up in the PM-201, and what do owners watch for?
The PM-201 runs the Cat C18 with ACERT combustion technology, rated in the 465-485 kW (625-650 hp) range at 2100 rpm depending on whether gross or net rating is quoted. The engine is generally regarded as durable in this platform when fuel and coolant are kept clean. The recurring complaint across the ACERT C-series family is injector wear accelerating on poor-quality or water-contaminated diesel, plus turbocharger actuator response getting sluggish as hours climb. Neither is unique to the cold planer application, but the milling environment (dust, heat cycling, stop-start loading on the rotor) is harder on the fuel system than a typical on-highway duty cycle. Keep fuel filtration tight and don't ignore a rough idle or slow spool-up as "just how it runs."
Why do owners treat the water spray system as more than just a dust-suppression feature?
The water spray system doubles as the machine's main defense against dust intrusion into bearings and rollers. Fine milled material carried by the spray works into conveyor idlers, rollers, and pulleys, and if the system isn't flushed out daily it packs into bearing seals and seizes them over time. The common-sense routine reported by operators is to flush the water lines daily rather than let sediment settle, and to clear rotor and drum debris with compressed air at shift's end instead of hosing the machine down, since standing water around the rotor and cutting tools promotes rust rather than preventing wear.
What wear patterns show up in the PM-201's undercarriage?
The PM-201 rides on four independent track units (front and rear), each roughly 2.07 m (6.8 ft) long by 350 mm (13.8 in) wide. Wear reported for this class of tracked paving equipment concentrates where bushings ride against the sprockets, producing oval-shaped wear grooves, along with idler and roller bearing wear accelerated by milled aggregate and spray water working past worn seals. Track and roller life varies heavily with substrate (asphalt overlay milling versus full-depth removal into aggregate base) and how consistently the daily flush routine is followed, so treat any quoted track-life figure as a range, not a guarantee. Have your dealer verify undercarriage wear against factory wear-limit gauges before budgeting for replacement, since track and roller work is one of the largest recurring costs on this machine.
What should be inspected on the cutting drum and carbide tools?
The rotor is offered with a choice of tool configurations, including a quick-release conical tool holder that lets crews swap worn bits without a full toolbox teardown. Owners flag uneven wear as the tell for a developing problem: tools that look sharper on one side of the drum than the other, or tools that have stopped rotating freely in their holders, put uneven load on the drum and its bearings rather than cutting cleanly. Packed-on debris and tools frozen in place are treated as early-failure signs in pre-purchase and routine inspections alike. Because the rotor carries significant stored energy at operating speed, treat holder and bearing wear as a scheduled inspection item rather than a run-to-failure part. Have your dealer verify rotor bearing and tool-holder condition at the recommended service interval.
How long does the conveyor belt last, and what tends to fail around it?
Belt life is typically reported as a full paving season, sometimes two, under normal service, with belt replacement itself a meaningful line-item cost once labor is added (actual cost varies by region and dealer). In practice, the bearings, idlers, rollers, and pulleys that drive the belt tend to fail before the belt itself, since milled material and spray water work into these components and seize the bearings if they aren't cleaned regularly. Daily cleaning with compressed air, plus seasonal attention to the drive-side mechanical components, is the most consistently cited way to extend both belt and roller life.
Are there known electrical or sensor quirks on this machine?
The PM-201's onboard monitoring system is designed to flag developing conditions and alert the operator before they become a shutdown, rather than only after a failure. On the engine control side, the coolant temperature, oil pressure, and (where fitted) coolant level sensors are wired into staged warning, derate, and shutdown logic, so a single failed sensor can present exactly like a bigger engine problem. The recommended approach is to pull active and logged codes with Cat Electronic Technician before assuming a real mechanical fault, since sensor replacement is far cheaper than an unnecessary turbo or fuel-system teardown. Have your dealer verify any derate or shutdown event against the logged codes before authorizing major engine work.
What should a buyer check on a used PM-201?
Inspection checklists for this machine converge on the same short list: the rotor's cutting tools (stuck, debris-packed, or worn unevenly side-to-side), hoses and cylinders for leaks, the rotor service door for latch integrity and clear access, and grease points for evidence of skipped maintenance. Visually check the water spray tank and hydraulic oil sight gauges, then run the onboard self-diagnostics to review any current or logged fault codes before a test run. Ask for maintenance records specifically covering rotor tool changes, conveyor belt replacement, and undercarriage wear checks, since those are the highest-cost wear items on the machine. Have your dealer verify rotor, bearing, and undercarriage wear against factory limits before finalizing a purchase price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PM-201 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.