Caterpillarwork toolmulti processor
Caterpillar MP30
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar MP30 Multi-Processor is a mid-size bare hydraulic demolition work tool, one housing size in Cat's MP15/MP20/MP30/MP40 multi-processor line. It carries no engine, fuel system, or coolant circuit of its own: jaw open/close and continuous 360-degree rotation draw all power from the carrier excavator's own hydraulic pump and work-tool circuit through dedicated high-pressure (jaw) and medium-pressure (rotation) lines. Installed weight (housing, jaw, and bracket) runs roughly 3,600-3,700 kg (7,937-8,157 lb) depending on jaw set. The housing accepts interchangeable Concrete Cutter, Shear, Tank Shear, Crusher, Primary Pulverizer, and Secondary Pulverizer jaws, letting one rotating body cover cutting, shearing, plate-cutting, and pulverizing/sizing tasks. Carrier fitment has historically centered on the 320-345 size class of Cat hydraulic excavators (330B L and 345B L early on, later 325C/325D, 330C/330D, 329D, 336D, 345C, and the UHD 385C for long-reach work), with current Cat catalog material pointing to 329-349 class carriers, provided the excavator supplies the required tool-circuit flow and pressure.
Documented MP30 serial ranges run from the late 1990s through a later production range still active as of a decade-later catalog edition, and the tool's core dimensional, weight, and force figures stayed unchanged across that span, pointing to one stable engineering generation for the housing rather than a mid-life redesign. What did shift over time was carrier compatibility, widening from the original B/C-series excavator pairings to the newer 329/336/345/349-class machines, along with mounting flexibility as CW-class quick couplers and pin-grabber options supplemented the dedicated bolt-on bracket. Cat's parts system has recently flagged the MP30 as non-current, consistent with the newer three-digit MP300-series Multi-Processors (MP318, MP324, MP332, and larger) now anchoring the catalog lineup. That transition is exactly why the MP30 still matters in the used and parts market: it was built in volume across a long, stable production run, one housing serves six jaw configurations rather than six separate tools, and a large population of MP30 housings and jaw sets remain in service on demolition and scrap fleets running compatible mid-size carriers, with parts support continuing through Cat's work-tool parts channel even as new-unit sales shift to the MP300 series.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar MP30 specifications
Engine
| Power source | No onboard engine or power unit. The MP30 Multi-Processor is a passive hydraulic work tool; jaw open/close and 360 degree rotation draw power entirely from the carrier hydraulic excavator's own pump, valves, and work-tool circuit (factory- or field-installed). Carrier compatibility has spanned the 320-345 size class of Cat hydraulic excavators across the tool's production life (historically 330B L and 345B L; later 325C/325D, 330C/330D, 345C, 329D, 336D, and UHD 385C) provided the carrier supplies the required tool-circuit flow and pressure. |
Weights
| Operating weight (housing, jaw and bracket) | 3,600 kg (7,937 lb) with Concrete Cutter, Shear, or Crusher jaws; 3,650 kg (8,047 lb) with Secondary Pulverizer jaws; 3,700 kg (8,157 lb) with Tank Shear or Primary Pulverizer jaws. Figures are for the tool alone and do not include a mounting bracket/quick-coupler adapter, which adds to installed weight. |
| Jaw set weight (interchangeable jaw only) | 1,300 kg (2,866 lb) - Concrete Cutter, Shear, or Crusher jaws; 1,350 kg (2,976 lb) - Secondary Pulverizer jaws; 1,400 kg (3,086 lb) - Tank Shear or Primary Pulverizer jaws. |
| Ground pressure | Not applicable/not published - this is a carrier-mounted work tool with no undercarriage of its own. |
Dimensions
| Overall length (housing + jaw) | 2,700-2,950 mm (106.3-116.1 in) depending on jaw set: 2,700 mm (106.3 in) Shear; 2,770 mm (109.1 in) Crusher; 2,800 mm (110.2 in) Concrete Cutter, Tank Shear, and Primary Pulverizer; 2,950 mm (116.1 in) Secondary Pulverizer. |
| Overall height | 1,680-2,200 mm (66.1-86.6 in): 1,680 mm (66.1 in) Shear; 1,980 mm (77.9 in) Concrete Cutter, Crusher, and Primary Pulverizer; 2,100 mm (82.7 in) Tank Shear; 2,200 mm (86.6 in) Secondary Pulverizer. |
| Overall width (housing) | 1,010 mm (39.8 in) on Concrete Cutter, Shear, Crusher, Primary Pulverizer, and Secondary Pulverizer jaws; 1,180 mm (46.5 in) on Tank Shear jaws, which use a wider plate-cutting jaw casting. |
| Jaw opening (maximum) | 470-1,100 mm (18.5-43.3 in), varies by jaw type: Shear 470 mm (18.5 in); Tank Shear 510 mm (20.1 in); Primary Pulverizer 960 mm (37.8 in); Concrete Cutter 975 mm (38.4 in); Crusher 1,050 mm (41.3 in); Secondary Pulverizer 1,100 mm (43.3 in). |
| Jaw depth | 580-970 mm (22.8-38.2 in): Tank Shear 580 mm (22.8 in); Shear 710 mm (28.0 in); Concrete Cutter 890 mm (35.0 in); Crusher 920 mm (36.2 in); Primary Pulverizer 940 mm (37.0 in); Secondary Pulverizer 970 mm (38.2 in). |
| Cutter/blade length | 200-600 mm (7.9-23.6 in): Secondary Pulverizer 200 mm (7.9 in); Crusher and Primary Pulverizer 250 mm (9.8 in); Concrete Cutter 520 mm (20.5 in); Tank Shear 580 mm (22.8 in); Shear 600 mm (23.6 in) - longest reversible blade. |
Performance
| Maximum force - Concrete Cutter jaws | Tooth-jaw tip 1,250 kN (140 short tons); front cutter tip 1,850 kN (208 short tons); primary blade center 4,100 kN (461 short tons). |
| Maximum force - Shear jaws | At tip 1,600 kN (180 short tons); primary blade center 3,750 kN (422 short tons); at throat 7,100 kN (798 short tons). |
| Maximum force - Tank Shear jaws | At tip 1,900 kN (214 short tons); at jaw center 4,000 kN (450 short tons); at throat 6,350 kN (714 short tons). Rated plate-steel cutting thickness 30 mm (1.2 in). Offered only for the MP20/MP30 housing size. |
| Maximum force - Crusher jaws | Tooth-jaw 1,250 kN (140 short tons); at 2nd tooth 1,750 kN (197 short tons); primary blade center approximately 3,800 kN (427 short tons). |
| Maximum force - Primary Pulverizer jaws | Tooth-jaw 1,250 kN (140 short tons); at 2nd tooth 1,550 kN (174 short tons); primary blade center 3,950 kN (444 short tons). |
| Maximum force - Secondary Pulverizer jaws | Tooth-jaw 1,200 kN (135 short tons); at 2nd tooth 1,550 kN (174 short tons); primary blade center 4,800 kN (540 short tons). |
| Cycle time (open-close-open) | 6.5 seconds, consistent across all MP30 jaw sets. |
| Rotation | Continuous 360 degree hydraulic rotation of the housing, joystick- or pedal-controlled from the carrier cab, letting the tool attack material from any angle without repositioning the carrier. |
| Structural steel cutting capacity (reference profiles) | Narrow I-beam: 500 mm (19.7 in) height, 200 mm (7.9 in) flange width, 16.0 mm (0.63 in) flange thickness, 10.2 mm (0.40 in) web thickness. Wide I-beam: 310 mm (12.2 in) height, 300 mm (11.8 in) flange width, 15.5 mm (0.61 in) flange thickness, 9.0 mm (0.35 in) web thickness. Solid round bar up to 90 mm (3.5 in); solid square bar up to 80 mm (3.1 in). Actual cutting capacity depends on carrier size, cutter/jaw condition, and steel tensile strength. |
Service capacities (summary)
| Fuel tank | Not applicable. The tool has no engine or fuel system; it draws all power from the carrier excavator. |
| Hydraulic system (tool circuit) | No separate onboard reservoir. Runs on dedicated work-tool hydraulics tied into the carrier's circuit: jaw open/close cylinder circuit rated up to 300 L/min (79.3 US gpm) at a maximum 350 bar / 35,000 kPa (5,076 psi); rotation circuit up to 40 L/min (10.6 US gpm) at a maximum 140 bar / 14,000 kPa (2,031 psi). Two-way high-pressure lines feed the jaw cylinder and two-way medium-pressure lines feed rotation, selected via joystick or pedal per customer preference. |
| Engine oil | Not applicable - the tool has no engine. |
| Cooling system | Not applicable - no engine; heat load from the tool circuit is handled by the carrier excavator's own hydraulic cooling system. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
MP30 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not applicable — the MP30 multi-processor has no engine of its own | None. The tool is powered entirely off the carrier excavator's hydraulic system; there is no engine oil circuit on this work tool. |
| Cooling system | Not applicable — no engine, no coolant circuit | None. |
| Fuel tank | Not applicable — no engine, no fuel system | None. |
| Hydraulic system (jaw cylinder + rotation circuit) | No standalone reservoir on the tool itself. The MP30 draws oil from the host excavator's hydraulic tank through dedicated high-pressure lines (jaw open/close) and medium-pressure lines (360-degree rotation); internal cylinder and rotation-motor oil volume is not published as a tool-specific fill capacity. Max working pressure runs about 350 bar (5,075 psi) at the cylinder and about 140 bar (2,030 psi) at the rotation drive, with cylinder flow up to roughly 300 L/min (79 US gal/min) depending on jaw set fitted. | Use the fluid specified in the carrier excavator's own O&M manual — the tool has no separate spec of its own. Across the Cat excavator range the standard recommendation is Cat HYDO Advanced hydraulic oil (graded by ambient temperature, e.g., 10W for cold climates up to 30/46-grade for temperate and hot climates) or Cat BIO HYDO Advanced where a biodegradable fluid is required. Keep system cleanliness high; avoid introducing dirt when connecting or servicing tool hydraulic lines. |
| Rotation (swivel/slew) drive | Not separately published — the rotation gear/motor assembly runs on the same oil supply as the jaw cylinder circuit rather than a self-contained gearbox reservoir | Same hydraulic oil as the tool/carrier circuit (see Hydraulic system row above); no distinct gear-oil fill is specified for this drive. |
| Grease points (jaw pivot pins, bushings, rotation/swivel bearing) | Spec only — no fill volume given. Grease each point until purge is visible at the seal or pin, per the grease-point decal on the housing. | NLGI 2 multipurpose grease (Cat Multipurpose Grease or a moly-fortified grease such as Cat Advanced 3Moly Grease for the higher-load swivel/pivot points). Shorten the greasing interval in wet, dusty, or abrasive demolition environments versus the standard schedule. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar MP30 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the MP30 beyond the schedule
Predictive Maintenance & Fluid Analysis
The MP30 has no engine oil to sample, so predictive care centers on the carrier excavator's hydraulic oil, since the tool draws all cylinder and rotation power through that circuit. Track carrier oil cleanliness and change intervals closely when running demolition duty cycles, and treat any jerky rotation, slow jaw response, or falling cycle time off the roughly 6.5-second open-close-open baseline as an early sign of circuit contamination, a worn cylinder seal, or rotator bearing wear rather than waiting for a hard failure.
Corrective & Common Repairs
Typical MP30 repairs trace to high-cycle demolition loading: cracked or chipped jaw tips and blades (flip reversible edges before replacing), elongated pivot-pin bores and worn bushings from repeated peak-force cycling, jaw-cylinder rod seal leaks from concrete dust and rebar debris working past the wiper, and rotator bearing wear that shows up as drag or binding through the 360-degree swing. Mounting bracket and quick-coupler bolts also work loose under shock loading and need routine re-torque, not just replacement after failure.
Overhaul & Rebuild Points
Because the MP30 sees full jaw and throat crushing/shearing force at the same pivot points and cylinder every cycle, major rebuild work concentrates on the rotator bearing and seals, the jaw cylinder (rod, bore, and seals), the pivot pin and bushing set, and the wear/side plates. Housing and mounting-bracket welds around the pivot and bracket pins warrant periodic crack-checking, since this is where repeated high-force cycling shows up first as structural fatigue rather than gradual wear.
Seasonal & Environment Servicing
Demolition duty exposes the MP30's pivot pins, rotator bearing, and cylinder rod to concrete dust, rebar grit, and standing water on plate- and tank-cutting jobs. In cold weather, switch to a grease that stays fluid at low temperature and purge each point fully so trapped moisture cannot freeze in the pin-bushing gap. Wipe and protect the exposed cylinder rod from corrosion between jobs, clear debris packed around the rotator drive before storage, and re-check bracket and coupler bolt torque after any period of idle or transport.
MP30 attachments & work tools
Jaw / head options overview
The MP30 multi-processor housing accepts interchangeable jaw sets: Concrete Cutter, Shear, Tank Shear, Crusher, Primary Pulverizer, and Secondary Pulverizer. One common rotating housing carries the cylinder and rotator, so a contractor swaps jaw sets rather than buying separate tools for each demolition task.
Concrete Cutter jaws
Sized for precise cutting of heavily reinforced concrete plus structural steel and pipe, with jaw opening around 975 mm (38 in) and max crushing/shear force at the blade center in the 3800-4100 kN (854,000-922,000 lbf) range depending on jaw condition and material. Crusher teeth and steel-cutting knives are replaceable/reversible.
Shear jaws
Built for cutting angle iron, channel iron, beams, pipe, rebar, cable, and tires at demolition sites, with max shear force at the throat around 7100 kN (1,596,000 lbf) on this size class. Knives are reversible for extended service life.
Tank Shear jaws
Dual-knife jaw set for cutting steel plate on tanks, barges, and railcars, producing smooth straight edges; offered only on the MP20 and MP30 sizes, not the smaller MP15 or larger MP40. Plate-cutting capacity on this class runs up to roughly 30 mm (1.2 in), with all knives reversible.
Pulverizer jaws (primary/secondary)
Primary Pulverizer jaws pulverize concrete, cut rebar, and separate rebar from concrete for combined demolition/recycling work; Secondary Pulverizer jaws are optimized for finish-sizing already-demolished concrete and rebar separation. Max crushing force at the blade center runs roughly 3950 kN (888,000 lbf) primary and up to about 4800 kN (1,079,000 lbf) secondary; all jaw sets share the quick-change lifting eyes and adjustable stop bolts.
Rotator and jaw-change system
The housing includes an integrated hydraulic rotator giving 360-degree continuous rotation so the tool can attack material from any angle without repositioning the carrier, controlled from an in-cab joystick or foot pedal. Jaw sets are changed in the field using the housing's lifting eyes and adjustable stop bolts after initial calibration.
Mounting / coupler system
The MP30 mounts via a dedicated bolt-on bracket sized to the carrier, letting the same tool move between several excavators, or via a CW-class quick coupler with weld-on or bolt-on hooks for fast swaps with other Cat work tools. Pin-grabber couplers are also listed by Cat as compatible with multi-processor tools of this type.
Carrier excavator compatibility
The MP30 is matched to mid-size demolition-spec Cat excavators, historically the 325/330/345 series (325C/325D, 329D, 330C/330D, 336D, 345C) with an Ultra High Demolition (UHD) long-reach configuration also offered on the 385C. Current Cat catalog listings show the MP30 fitted to 329, 336, 345, and 349 class excavators plus dedicated high-reach demolition carriers; exact carrier fitment varies by machine series/generation and should be confirmed with a Cat dealer.
Hydraulic kit requirements
The carrier needs two-way high-pressure hydraulic lines for jaw open/close plus a separate two-way medium-pressure circuit for rotation, switchable from the cab. On this size class, max oil flow to the cylinder runs about 300 l/min (79 gpm) at up to 350 bar (5,075 psi), with the rotation circuit around 40 l/min (10.6 gpm) at up to 140 bar (2,030 psi); open-close-open cycle time is about 6.5 seconds. This hydraulic kit can be factory- or field-installed on the excavator.
Weight and factory guarding options
Total installed weight (housing, jaw, and bracket) for the MP30 runs roughly 3600-3700 kg (7,935-8,155 lb) depending on jaw set. Cat recommends fitting falling-object protective guarding on the carrier cab for demolition applications with debris risk; consult the dealer for available cab guarding and high-reach boom options on larger carriers.
All MP30 assemblies by section
Every catalogued assembly group for the Caterpillar MP30. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Frame And Body
169-6059 Housing Gp-Multi-Processor
| 16***59 | Housing Group-Multi-Processor | 1 |
| 35***16 | Housing Group-Multi-Processor | 1 |
| 35***17 | Rotator Group-Hydraulic | 1 |
353-3516 Housing Gp-Multi-Processor
| 35***16 | Housing Group-Multi-Processor | 1 |
172-1104 Housing Gp-Multi-Processor
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***46 | Seal | 1 |
| 15***18 | Lockwasher | 8 |
171-8109 Housing Gp-Multi-Processor
| 17***09 | Housing Group-Multi-Processor | 1 |
| 17***10 | Rotator Group-Hydraulic | 1 |
| 17***04 | Housing Group-Multi-Processor | 1 |
179-5329 Housing Gp-Multi-Processor
| 17***29 | Housing Group-Multi-Processor | 1 |
179-6674 Housing Gp-Multi-Processor
| 17***74 | Housing Group-Multi-Processor | 1 |
179-6734 Housing Gp-Multi-Processor
| 17***34 | Housing Group-Multi-Processor | 1 |
170-3658 Housing Gp-Multi-Processor
| 17***58 | Housing Group-Multi-Processor | 1 |
| 17***26 | Rotator Group-Hydraulic | 1 |
| 17***09 | Housing Group-Multi-Processor | 1 |
179-6733 Housing Gp-Multi-Processor
| 17***33 | Housing Group-Multi-Processor | 1 |
Hydraulic System
255-2297 Chart-Connecting Lines
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
255-2290 Chart-Connecting Lines
| 25***90 | Chart-Connecting Lines | 1 |
262-0760 Chart-Connecting Lines
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
| 16***54 | Seal | 1 |
255-2301 Chart-Connecting Lines
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
262-0763 Chart-Connecting Lines
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
| 16***54 | Seal | 1 |
262-0762 Chart-Connecting Lines
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
251-8115 Chart-Connecting Lines
| 25***15 | Chart-Connecting Lines | 1 |
262-0761 Chart-Connecting Lines
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
| 15***18 | Lockwasher | 2 |
170-3665 Cylinder & Valve Gp
| 14***06 | Bolt-Socket Head; (M20x2.5x140-mm) | 5 |
| 14***78 | Lockwasher | 1 |
| 14***51 | Elbow Group | 1 |
170-3668 Cylinder & Valve Gp
| 09***48 | Nipple, Grease | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 24 |
| 16***71 | Bushing | 2 |
172-1113 Cylinder & Valve Gp
| 09***48 | Nipple, Grease | 1 |
| 16***16 | Seal | 1 |
| 16***41 | Bushing | 2 |
171-8118 Cylinder & Valve Gp
| 09***48 | Nipple, Grease | 1 |
| 16***16 | Seal | 1 |
| 16***87 | Bushing | 2 |
170-5581 Cylinder Gp-Hydraulic
| 11***49 | Fitting; (Quick Disconnect, Male) | 2 |
| 11***54 | Cap | 2 |
| 17***81 | Cylinder Group-Hydraulic | 1 |
222-8827 Cylinder Gp-Hydraulic
| 14***23 | Hose As | 2 |
| 17***22 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
170-5579 Cylinder Gp-Hydraulic
| 17***79 | Cylinder Group-Hydraulic | 1 |
| 23***81 | Cap-Dust | 2 |
| 23***82 | Kit-Repair; (Quick Disconnect) | 1 |
170-2109 Cylinder Gp-Hydraulic
| 09***48 | Nipple, Grease | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 24 |
| 16***16 | Seal | 1 |
222-8829 Cylinder Gp-Hydraulic
| 17***23 | Hose As | 2 |
| 18***53 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
171-8124 Cylinder Gp-Hydraulic
| 14***03 | Hose As | 2 |
| 17***24 | Cylinder Group-Hydraulic | 1 |
| 17***13 | Hose As | 2 |
170-2108 Cylinder Gp-Hydraulic
| 09***48 | Nipple, Grease | 1 |
| 16***16 | Seal | 1 |
| 16***87 | Bushing | 2 |
172-2205 Cylinder Gp-Hydraulic
| 14***93 | Elbow Group | 2 |
| 17***05 | Cylinder Group-Hydraulic | 1 |
| 17***20 | Hose As | 2 |
244-3147 Fitting Gp-Hydraulic
| 17***24 | Hose As | 2 |
| 17***25 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
244-3146 Fitting Gp-Hydraulic
| 16***57 | Hose As | 2 |
| 17***19 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
233-2155 Lines Gp-Connecting
| 17***24 | Lines Group-Connecting | 1 |
| 23***55 | Lines Group-Connecting | 1 |
| 24***29 | Lines Group-Connecting | 1 |
233-2991 Lines Gp-Connecting
| 17***46 | Lines Group-Connecting | 1 |
| 23***91 | Lines Group-Connecting | 1 |
| 24***30 | Lines Group-Connecting | 1 |
244-3135 Lines Gp-Connecting
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 16 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
183-5514 Lines Gp-Connecting
| 18***14 | Lines Group-Connecting | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
244-6793 Lines Gp-Connecting
| 24***93 | Lines Group-Connecting | 1 |
| 24***44 | Hose As | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
195-3876 Lines Gp-Connecting
| 19***76 | Lines Group-Connecting | 1 |
| 23***91 | Lines Group-Connecting | 1 |
| 23***92 | Lines Group-Connecting | 1 |
248-6178 Lines Gp-Connecting
| 03***43 | Seal-O-Ring | 1 |
| 09***48 | Nipple, Grease | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
177-5026 Lines Gp-Connecting
| 15***18 | Hose As | 2 |
| 17***26 | Lines Group-Connecting | 1 |
| 18***89 | Hose As | 2 |
239-9252 Lines Gp-Connecting
| 23***52 | Lines Group-Connecting | 1 |
| 24***94 | Lines Group-Connecting | 1 |
| 24***97 | Lines Group-Connecting | 1 |
244-6792 Lines Gp-Connecting
| 13***59 | Hose As | 2 |
| 24***92 | Lines Group-Connecting | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
228-7523 Lines Gp-Connecting
| 22***23 | Lines Group-Connecting | 1 |
| 24***39 | Lines Group-Connecting | 1 |
| 24***96 | Lines Group-Connecting | 1 |
177-5019 Lines Gp-Connecting
| 17***19 | Lines Group-Connecting | 1 |
| 17***20 | Hose As | 2 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 2 |
177-5023 Lines Gp-Connecting
| 14***48 | Hose As | 2 |
| 17***23 | Lines Group-Connecting | 1 |
| 18***78 | Hose As | 2 |
211-9059 Lines Gp-Connecting
| 15***95 | Adapter As | 2 |
| 15***46 | Seal | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
244-3138 Lines Gp-Connecting
| 18***53 | Hose As | 2 |
| 24***38 | Lines Group-Connecting | 1 |
244-6794 Lines Gp-Connecting
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
246-1431 Lines Gp-Connecting
| 03***43 | Seal-O-Ring | 1 |
| 08***09 | Spacer; (16.6x32x8.5-mm Thk) | 34 |
| 12***28 | Adaptor - Includes:- | 2 |
177-5129 Lines Gp-Connecting
| 17***29 | Lines Group-Connecting | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
221-0855 Lines Gp-Connecting
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
| 22***55 | Lines Group-Connecting | 1 |
246-1429 Lines Gp-Connecting
| 17***21 | Kit-Housing | 1 |
| 17***22 | Shaft-Output | 1 |
| 17***25 | Key-Square | 1 |
244-3139 Lines Gp-Connecting
| 18***68 | Hose As | 2 |
| 24***39 | Lines Group-Connecting | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
186-0126 Lines Gp-Connecting
| 15***99 | Hose As | 2 |
| 18***26 | Lines Group-Connecting | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
177-5024 Lines Gp-Connecting
| 17***24 | Lines Group-Connecting | 1 |
| 18***94 | Hose As | 2 |
| 18***41 | Hose As | 2 |
185-8046 Lines Gp-Connecting
| 18***46 | Lines Group-Connecting | 1 |
| 22***68 | Hose As | 2 |
| 22***69 | Hose As | 2 |
244-3127 Lines Gp-Connecting
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
244-3126 Lines Gp-Connecting
| 24***26 | Lines Group-Connecting | 1 |
| 24***95 | Lines Group-Connecting | 1 |
| 24***98 | Lines Group-Connecting | 1 |
185-7619 Lines Gp-Connecting
| 13***38 | Hose As. | 2 |
| 18***19 | Lines Group-Connecting | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
233-2992 Lines Gp-Connecting
| 23***92 | Lines Group-Connecting | 1 |
| 23***69 | Lines Group-Connecting | 1 |
| 24***78 | Lines Group-Connecting | 1 |
221-0774 Lines Gp-Connecting
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 15***94 | Adapter As | 2 |
| 15***44 | Seal | 1 |
244-6798 Lines Gp-Connecting
| 17***73 | Motor Group-Gerotor | 1 |
| 17***74 | Manifold Group-Control | 1 |
| 17***76 | Ring-Mounting | 1 |
244-6795 Lines Gp-Connecting
| 18***53 | Hose As | 2 |
| 24***95 | Lines Group-Connecting | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
244-6797 Lines Gp-Connecting
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 4 |
| 24***97 | Lines Group-Connecting | 1 |
| 7Y***19 | Seal-O-Ring (Id=12.37mm) | 2 |
177-5021 Lines Gp-Connecting
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 17***21 | Lines Group-Connecting | 1 |
| 17***45 | Hose As | 2 |
246-1430 Lines Gp-Connecting
| 17***73 | Motor Group-Gerotor | 1 |
| 17***76 | Ring-Mounting | 1 |
| 17***77 | Gear-Drive; (15-Teeth) | 1 |
244-3136 Lines Gp-Connecting
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 16 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
174-9916 Lines Gp-Connecting
| 17***16 | Lines Group-Connecting | 1 |
| 17***20 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
234-5669 Lines Gp-Connecting
| 23***69 | Lines Group-Connecting | 2 |
| 24***60 | Lines Group-Connecting | 1 |
224-7727 Lines Gp-Connecting
| 22***27 | Lines Group-Connecting | 1 |
| 25***45 | Hose As | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
239-9251 Lines Gp-Connecting
| 14***68 | Hose As | 2 |
| 23***51 | Lines Group-Connecting | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
174-9914 Lines Gp-Connecting
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 17***14 | Lines Group-Connecting | 1 |
| 17***22 | Hose As | 2 |
244-6796 Lines Gp-Connecting
| 17***22 | Hose As | 2 |
| 24***96 | Lines Group-Connecting | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
174-9918 Lines Gp-Connecting
| 17***18 | Lines Group-Connecting | 1 |
| 17***36 | Hose As | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 4 |
177-5044 Lines Gp-Connecting
| 17***26 | Lines Group-Connecting | 1 |
| 17***44 | Lines Group-Connecting | 2 |
174-9917 Lines Gp-Connecting
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 17***17 | Lines Group-Connecting | 1 |
| 17***33 | Hose As | 2 |
247-6860 Lines Gp-Connecting
| 03***43 | Seal-O-Ring | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 15***94 | Adapter As | 6 |
177-5046 Lines Gp-Connecting
| 13***75 | Hose As | 2 |
| 17***46 | Lines Group-Connecting | 1 |
| 19***58 | Hose As | 2 |
174-9915 Lines Gp-Connecting
| 17***15 | Lines Group-Connecting | 1 |
| 17***20 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
174-9912 Lines Gp-Connecting
| 17***12 | Lines Group-Connecting | 1 |
| 17***20 | Hose As | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 4 |
170-2174 Manifold Gp-Control
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 16 |
| 12***28 | Adaptor - Includes:- | 4 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 4 |
170-2172 Motor & Manifold Gp-Rotator
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 16 |
| 12***28 | Adaptor - Includes:- | 4 |
| 12***24 | Seal-O-Ring; (12.37mm Id) | 4 |
216-7650 Motor Gp-Gerotor
| 16***43 | Seal | 1 |
| 17***41 | Stator | 1 |
| 17***42 | Rotor | 1 |
170-2173 Motor Gp-Gerotor
| 03***43 | Seal-O-Ring | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 15***94 | Adapter As | 6 |
169-6060 Rotator Gp-Hydraulic
| 16***43 | Seal | 1 |
| 16***60 | Rotator Group-Hydraulic | 1 |
| 17***57 | Plug As | 4 |
171-8110 Rotator Gp-Hydraulic
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 4 |
| 17***10 | Rotator Group-Hydraulic | 1 |
| 17***55 | Seal-O-Ring | 2 |
171-7526 Rotator Gp-Hydraulic
| 17***30 | Plug | 6 |
| 17***31 | Valve | 1 |
| 17***32 | Plug-Screw | 2 |
216-7649 Rotator Gp-Hydraulic
| 14***08 | Fitting | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
353-3517 Rotator Gp-Hydraulic
| 14***74 | Fitting As | 2 |
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
172-1124 Swivel Gp
| 17***24 | Swivel Group | 1 |
| 20***86 | Plate-Lock | 2 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
170-3045 Swivel Gp
| 14***86 | Fitting As | 2 |
| 15***44 | Seal | 1 |
| 16***92 | Wrench | 1 |
265-6468 Swivel Gp
| 20***14 | Plate-Lock | 2 |
| 26***68 | Swivel Group | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
208-8451 Valve Gp-Control
| 20***16 | Plate-Lock | 2 |
| 20***51 | Valve Group-Control | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
208-5125 Valve Gp-Speed Control
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
170-3229 Valve Gp-Speed Control
| 17***29 | Valve Group-Speed Control | 1 |
| 20***17 | Plate-Lock | 2 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 2 |
Service Equipment And Supplies
196-8640 Kit-Maintenance
| 19***40 | Kit-Maintenance | 1 |
170-5114 Kit-Maintenance
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
171-8111 Kit-Maintenance
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
170-3672 Kit-Maintenance
| 14***36 | Film-Warning; (Flying Debris) | 2 |
| 14***69 | Film-Warning; (Alert) | 2 |
| 14***70 | Film-Warning; (Read Omm) | 2 |
200-2960 Lock Gp-Shear
| 20***60 | Lock Group-Shear | 1 |
200-2959 Lock Gp-Shear
| 20***59 | Lock Group-Shear | 1 |
200-2961 Lock Gp-Shear
| 20***61 | Lock Group-Shear | 1 |
200-2885 Lock Gp-Shear
| 20***85 | Lock Group-Shear | 1 |
171-8108 Plate & Film Gp
| 17***08 | Plate & Film Group | 1 |
170-5736 Plate & Film Gp
| 17***36 | Plate & Film Group | 1 |
169-6058 Plate & Film Gp
| 16***58 | Plate & Film Group | 1 |
172-2206 Plate & Film Gp
| 17***06 | Plate & Film Group | 1 |
Work Tool Arrangement
171-8107 Multi-Processor Ar
| 17***07 | Multi-Processor Ar | 1 |
| 17***08 | Plate & Film Group | 1 |
| 17***11 | Kit-Maintenance | 1 |
172-1232 Multi-Processor Ar
| 17***32 | Multi-Processor Ar | 1 |
| 17***06 | Plate & Film Group | 1 |
| 17***34 | Housing Group-Multi-Processor | 1 |
169-6045 Multi-Processor Ar
| 16***45 | Multi-Processor Ar | 1 |
| 16***58 | Plate & Film Group | 1 |
| 17***14 | Kit-Maintenance | 1 |
170-3375 Multi-Processor Ar
| 17***75 | Multi-Processor Ar | 1 |
| 17***72 | Kit-Maintenance | 1 |
| 17***36 | Plate & Film Group | 1 |
Work Tools
253-7830 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 25***30 | Bracket Group-Mounting | 1 |
| 25***99 | Bracket Group-Mounting | 1 |
276-7982 Bracket Gp-Mounting
| 14***75 | Bolt; (M20x2.5x75-Thd) | 6 |
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 4 |
257-1047 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***59 | Plate-Serial Number | 1 |
169-4975 Bracket Gp-Mounting
| 16***75 | Bracket Group-Mounting | 1 |
| 16***96 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-4974 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***74 | Bracket Group-Mounting | 1 |
| 16***94 | Bracket As | 1 |
175-3014 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***18 | Bracket As | 1 |
| 16***97 | Plate-Cover | 1 |
257-0101 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 25***01 | Bracket Group-Mounting | 1 |
| 27***44 | Bracket As | 1 |
255-0001 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 25***01 | Bracket Group-Mounting | 1 |
275-7645 Bracket Gp-Mounting
| 15***19 | Lockwasher | 8 |
| 27***45 | Bracket Group-Mounting | 1 |
| 29***80 | Cover | 1 |
169-4971 Bracket Gp-Mounting
| 16***71 | Bracket Group-Mounting | 1 |
| 16***93 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
247-0536 Bracket Gp-Mounting
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
200-7506 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***97 | Plate-Cover | 1 |
| 20***06 | Bracket Group-Mounting | 1 |
190-4854 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 19***54 | Bracket Group-Mounting | 1 |
| 19***36 | Bracket As | 1 |
193-9166 Bracket Gp-Mounting
| 17***33 | Cover | 1 |
| 19***66 | Bracket Group-Mounting | 1 |
| 19***67 | Bracket As | 1 |
179-1646 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***19 | Bracket As | 1 |
| 16***97 | Plate-Cover | 1 |
169-4981 Bracket Gp-Mounting
| 16***81 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***47 | Bracket Group-Mounting | 1 |
257-0098 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 25***98 | Bracket Group-Mounting | 1 |
| 25***47 | Bracket Group-Mounting | 1 |
185-7339 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 18***39 | Bracket Group-Mounting | 1 |
| 19***85 | Bracket Group-Mounting | 1 |
169-4967 Bracket Gp-Mounting
| 16***67 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 23***05 | Bracket As | 1 |
185-7340 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 18***40 | Bracket Group-Mounting | 1 |
| 18***12 | Bracket As | 1 |
248-7980 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***71 | Washer; (26x90x8-mm Thk) | 2 |
| 24***80 | Bracket Group-Mounting | 1 |
179-1653 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***15 | Bracket As | 1 |
| 16***97 | Plate-Cover | 1 |
257-1041 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 25***41 | Bracket Group-Mounting | 1 |
| 27***83 | Bracket As | 1 |
336-0800 Bracket Gp-Mounting
| 14***75 | Bolt; (M20x2.5x75-Thd) | 6 |
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 4 |
179-1651 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 17***16 | Bracket As | 1 |
175-0340 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***40 | Bracket Group-Mounting | 1 |
| 17***48 | Bracket As | 1 |
275-9776 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 27***76 | Bracket Group-Mounting | 1 |
246-9991 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***21 | Lockwasher | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
257-0102 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 25***02 | Bracket Group-Mounting | 1 |
| 27***77 | Bracket As | 1 |
169-4976 Bracket Gp-Mounting
| 16***76 | Bracket Group-Mounting | 1 |
| 16***97 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-4978 Bracket Gp-Mounting
| 16***78 | Bracket Group-Mounting | 1 |
| 16***98 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-4970 Bracket Gp-Mounting
| 16***70 | Bracket Group-Mounting | 1 |
| 16***91 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
169-4980 Bracket Gp-Mounting
| 16***80 | Bracket Group-Mounting | 1 |
| 16***99 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
175-0338 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***38 | Bracket Group-Mounting | 1 |
| 17***48 | Bracket Group-Mounting | 1 |
217-0996 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 21***96 | Bracket Group-Mounting | 1 |
| 22***78 | Bracket Group-Mounting | 1 |
191-4781 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 18***96 | Bracket As | 1 |
169-5311 Bracket Gp-Mounting
| 16***11 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***54 | Bracket Group-Mounting | 1 |
193-4497 Bracket Gp-Mounting
175-0341 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***41 | Bracket Group-Mounting | 1 |
| 17***49 | Bracket As | 1 |
291-1777 Bracket Gp-Mounting
| 14***75 | Bolt; (M20x2.5x75-Thd) | 12 |
| 16***85 | Edge-Cutting | 4 |
| 16***86 | Shim; (1-mm Thk) | 12 |
189-0311 Bracket Gp-Mounting
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 18***11 | Bracket Group-Mounting | 1 |
| 19***55 | Bracket As | 1 |
191-4785 Bracket Gp-Mounting
299-0293 Bracket Gp-Mounting
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 4 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
254-4463 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 25***63 | Bracket Group-Mounting | 1 |
| 25***02 | Bracket Group-Mounting | 1 |
179-1647 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***46 | Bracket As | 1 |
| 17***33 | Cover | 1 |
175-0339 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***39 | Bracket Group-Mounting | 1 |
| 17***49 | Bracket Group-Mounting | 1 |
169-4968 Bracket Gp-Mounting
| 16***68 | Bracket Group-Mounting | 1 |
| 16***89 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
201-9466 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 20***66 | Bracket Group-Mounting | 1 |
169-4969 Bracket Gp-Mounting
| 16***69 | Bracket Group-Mounting | 1 |
| 16***90 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
179-1645 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***97 | Plate-Cover | 1 |
| 17***45 | Bracket As | 1 |
180-1286 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 18***86 | Bracket Group-Mounting | 1 |
| 19***81 | Bracket Group-Mounting | 1 |
254-4039 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 25***39 | Bracket Group-Mounting | 1 |
175-3012 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***12 | Bracket Group-Mounting | 1 |
| 17***51 | Bracket Group-Mounting | 1 |
222-3345 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 22***45 | Bracket Group-Mounting | 1 |
169-5312 Bracket Gp-Mounting
| 16***12 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***46 | Bracket Group-Mounting | 1 |
169-5308 Bracket Gp-Mounting
| 16***08 | Bracket Group-Mounting | 1 |
| 16***16 | Bracket As | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
179-1649 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 17***18 | Bracket As | 1 |
209-1776 Bracket Gp-Mounting
| 15***19 | Lockwasher | 18 |
| 17***61 | Cover | 2 |
| 20***76 | Bracket Group-Mounting | 1 |
190-5435 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 18***95 | Bracket As | 1 |
193-9233 Bracket Gp-Mounting
| 15***18 | Lockwasher | 8 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 16***97 | Plate-Cover | 1 |
175-0342 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***42 | Bracket Group-Mounting | 1 |
| 17***53 | Bracket Group-Mounting | 1 |
290-8330 Bracket Gp-Mounting
| 14***87 | Screw-Flat Head | 6 |
| 16***85 | Edge-Cutting | 1 |
| 16***86 | Shim; (1-mm Thk) | 6 |
193-9094 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 19***94 | Bracket Group-Mounting | 1 |
| 19***33 | Bracket Group-Mounting | 1 |
179-1654 Bracket Gp-Mounting
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 17***54 | Bracket Group-Mounting | 1 |
| 19***94 | Bracket Group-Mounting | 1 |
224-2477 Bracket Gp-Mounting
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 17***90 | Bolt-Socket Head; (M20x2.5x70-mm) | 36 |
| 20***59 | Plate-Serial Number | 1 |
169-5307 Bracket Gp-Mounting
| 16***07 | Bracket Group-Mounting | 1 |
| 16***82 | Bolt-Socket Head; (M24x3x70-mm) | 14 |
| 17***45 | Bracket Group-Mounting | 1 |
257-0099 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 25***99 | Bracket Group-Mounting | 1 |
179-1648 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***47 | Bracket As | 1 |
| 17***33 | Cover | 1 |
224-2478 Bracket Gp-Mounting
| 15***18 | Lockwasher | 6 |
| 17***33 | Cover | 1 |
| 22***78 | Bracket Group-Mounting | 1 |
169-6029 Edge Gp-Cutting -Shear
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 6 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
172-5929 Edge Gp-Cutting -Shear
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 8 |
| 16***88 | Shim; (1.5-mm Thk) | 4 |
206-8084 Edge Gp-Cutting -Pulverizer
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 3 |
| 16***88 | Shim; (1.5-mm Thk) | 1 |
169-6036 Edge Gp-Cutting -Pulverizer
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 3 |
| 16***36 | Edge Group-Cutting; -Pulverizer | 1 |
| 16***17 | Edge-Cutting | 2 |
169-6033 Edge Gp-Cutting -Shear
| 16***33 | Edge Group-Cutting; -Shear | 1 |
| 16***17 | Edge-Cutting | 2 |
| 16***18 | Shim; (1-mm Thk) | 6 |
173-1679 Edge Gp-Cutting -Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 3 |
| 16***88 | Shim; (1.5-mm Thk) | 1 |
169-6035 Edge Gp-Cutting -Pulverizer
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 9 |
| 16***85 | Edge-Cutting | 1 |
| 16***86 | Shim; (1-mm Thk) | 5 |
169-6032 Edge Gp-Cutting -Pulverizer
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 6 |
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 3 |
| 16***85 | Edge-Cutting | 1 |
169-6030 Edge Gp-Cutting -Combination
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 4 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
169-0370 Edge Gp-Cutting -Crusher
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 2 |
| 14***75 | Bolt; (M20x2.5x75-Thd) | 12 |
| 16***70 | Edge Group-Cutting; -Crusher | 1 |
172-5900 Edge Gp-Cutting -Pulverizer
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 7 |
| 14***87 | Screw-Flat Head | 10 |
| 16***85 | Edge-Cutting | 1 |
169-7108 Edge Gp-Cutting -Crusher
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 6 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
169-6037 Edge Gp-Cutting -Shear
| 14***75 | Bolt; (M20x2.5x75-Thd) | 3 |
| 16***37 | Edge Group-Cutting; -Shear | 1 |
| 17***24 | Screw-Flat Head | 3 |
173-1680 Edge Gp-Cutting -Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 1 |
172-5911 Edge Gp-Cutting -Pulverizer
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 3 |
| 17***24 | Screw-Flat Head | 3 |
| 17***11 | Edge Group-Cutting; -Pulverizer | 1 |
172-1225 Edge Gp-Cutting -Shear
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 7 |
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 7 |
| 14***87 | Screw-Flat Head | 3 |
172-2213 Edge Gp-Cutting -Combination
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 12 |
| 16***74 | Shim; (0.5-mm Thk) | 24 |
| 16***75 | Shim; (1-mm Thk) | 24 |
172-5894 Edge Gp-Cutting -Crusher
| 14***98 | Screw-Flat Head; (M20x2.5x90-mm) | 3 |
| 14***87 | Screw-Flat Head | 3 |
| 17***94 | Edge Group-Cutting; -Crusher | 1 |
169-6034 Edge Gp-Cutting -Combination
| 14***15 | Screw-Flat Head; (M20x2.5x100-mm) | 7 |
| 14***81 | Screw-Flat Head | 7 |
| 16***34 | Edge Group-Cutting; -Combination | 1 |
169-6031 Edge Gp-Cutting -Pulverizer
| 16***85 | Edge-Cutting | 2 |
| 16***86 | Shim; (1-mm Thk) | 4 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
172-5940 Edge Gp-Cutting -Shear
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 4 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
173-1662 Jaw Gp-Combination
| 17***08 | Tooth Group-Crusher | 1 |
| 17***13 | Edge Group-Cutting; -Combination | 1 |
| 17***20 | Jaw As; (Lower) | 1 |
179-6763 Jaw Gp-Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***15 | Kit-Maintenance | 1 |
| 16***18 | Shim; (1-mm Thk) | 2 |
172-3714 Jaw Gp-Combination
| 16***41 | Bushing | 2 |
| 16***14 | Jaw As; (Lower) | 1 |
| 16***25 | Jaw As; (Upper) | 1 |
179-2070 Jaw Gp-Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***82 | Kit-Maintenance | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
169-1723 Jaw Gp-Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 1 |
169-6006 Jaw Gp-Combination
| 16***71 | Pin | 1 |
| 16***78 | Spacer; (128x139x30-mm Thk) | 1 |
| 16***79 | Shim; (2.5-mm Thk) | 2 |
179-6760 Jaw Gp-Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***83 | Plate & Film Group | 1 |
| 16***15 | Kit-Maintenance | 1 |
179-6762 Jaw Gp-Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 17***32 | Shim; (1.5-mm Thk) | 2 |
| 17***33 | Shim; (1-mm Thk) | 2 |
179-2069 Jaw Gp-Combination
| 17***68 | Jaw As; (Lower) | 1 |
| 17***71 | Jaw As; (Upper) | 1 |
| 17***74 | Tooth Group-Crusher | 1 |
179-6761 Jaw Gp-Combination
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***15 | Kit-Maintenance | 1 |
| 16***18 | Shim; (1-mm Thk) | 2 |
179-6756 Jaw Gp-Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***82 | Kit-Maintenance | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
179-6759 Jaw Gp-Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 17***96 | Plate & Film Group | 1 |
| 17***02 | Kit-Maintenance | 1 |
169-7103 Jaw Gp-Crusher
| 16***67 | Jaw As; (Lower) | 1 |
| 16***68 | Jaw As; (Upper) | 1 |
| 16***69 | Tooth Group-Crusher | 1 |
179-2068 Jaw Gp-Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***82 | Kit-Maintenance | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
169-0366 Jaw Gp-Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***66 | Jaw Group-Crusher | 1 |
| 17***32 | Shim; (1.5-mm Thk) | 2 |
179-6757 Jaw Gp-Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***82 | Kit-Maintenance | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
179-2067 Jaw Gp-Crusher
| 17***67 | Jaw As; (Lower) | 1 |
| 17***70 | Jaw As; (Upper) | 1 |
| 17***73 | Tooth Group-Crusher | 1 |
179-6758 Jaw Gp-Crusher
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***82 | Kit-Maintenance | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
173-1661 Jaw Gp-Crusher
| 17***22 | Pin | 1 |
| 17***23 | Bushing | 2 |
| 17***24 | Spacer; (180x194x42-mm Thk) | 1 |
172-5887 Jaw Gp-Crusher
| 16***41 | Bushing | 2 |
| 16***05 | Jaw As; (Lower) | 1 |
| 16***06 | Jaw As; (Upper) | 1 |
179-6768 Jaw Gp-Pulverizer
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
206-8080 Jaw Gp-Pulverizer -Secondary
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
179-6767 Jaw Gp-Pulverizer
| 17***32 | Shim; (1.5-mm Thk) | 2 |
| 17***33 | Shim; (1-mm Thk) | 6 |
| 17***75 | Tooth Group-Crusher | 1 |
169-1726 Jaw Gp-Pulverizer -Primary
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
173-1663 Jaw Gp-Pulverizer -Secondary
| 16***41 | Bushing | 2 |
| 16***15 | Jaw As; (Lower) | 1 |
| 16***26 | Jaw As; (Upper) | 1 |
179-6770 Jaw Gp-Pulverizer
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 3 |
| 16***88 | Shim; (1.5-mm Thk) | 1 |
169-6008 Jaw Gp-Pulverizer -Secondary
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
169-6007 Jaw Gp-Pulverizer -Primary
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***07 | Jaw Group-Pulverizer; -Primary | 1 |
| 17***02 | Kit-Maintenance | 1 |
179-6769 Jaw Gp-Pulverizer
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***86 | Shim; (1-mm Thk) | 2 |
| 16***88 | Shim; (1.5-mm Thk) | 2 |
179-2073 Jaw Gp-Pulverizer -Secondary
| 16***41 | Bushing | 2 |
| 16***16 | Jaw As-Lower | 1 |
| 16***27 | Jaw As-Upper | 1 |
179-2072 Jaw Gp-Pulverizer -Secondary
| 16***71 | Pin | 1 |
| 16***79 | Shim; (2.5-mm Thk) | 2 |
| 16***80 | Shim; (3-mm Thk) | 2 |
179-2071 Jaw Gp-Pulverizer -Primary
| 17***22 | Pin | 1 |
| 17***23 | Bushing | 2 |
| 17***25 | Shim; (2.5-mm Thk)(2.5mm Thk) | 2 |
172-5906 Jaw Gp-Pulverizer -Secondary
| 16***71 | Pin | 1 |
| 16***78 | Spacer; (128x139x30-mm Thk) | 1 |
| 16***79 | Shim; (2.5-mm Thk) | 2 |
179-6764 Jaw Gp-Pulverizer
| 17***22 | Pin | 1 |
| 17***23 | Bushing | 2 |
| 17***25 | Shim; (2.5-mm Thk)(2.5mm Thk) | 2 |
179-6765 Jaw Gp-Pulverizer
| 17***69 | Jaw As-Lower | 1 |
| 17***72 | Jaw As-Upper | 1 |
| 17***75 | Tooth Group-Crusher | 1 |
206-8081 Jaw Gp-Pulverizer
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***74 | Shim; (0.5-mm Thk) | 24 |
| 16***75 | Shim; (1-mm Thk) | 24 |
172-5895 Jaw Gp-Pulverizer -Primary
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 17***95 | Jaw Group-Pulverizer; -Primary | 1 |
| 17***39 | Plate & Film Group | 1 |
169-1727 Jaw Gp-Pulverizer -Secondary
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***27 | Jaw Group-Pulverizer; -Secondary | 1 |
| 17***66 | Plate & Film Group | 1 |
179-6766 Jaw Gp-Pulverizer
| 13***55 | Setscrew; (M4x0.7x8-mm) | 1 |
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 17***32 | Shim; (1.5-mm Thk) | 2 |
169-1728 Jaw Gp-Shear -Scrap
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***28 | Jaw Group-Shear; -Scrap | 1 |
| 16***74 | Shim; (0.5-mm Thk) | 10 |
179-2075 Jaw Gp-Shear -Scrap
| 15***21 | Lockwasher | 2 |
| 16***41 | Bushing | 2 |
| 16***18 | Jaw As-Lower | 1 |
169-1724 Jaw Gp-Shear -Plate
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***24 | Jaw Group-Shear; -Plate | 1 |
| 16***74 | Shim; (0.5-mm Thk) | 10 |
179-6781 Jaw Gp-Shear
| 15***22 | Lockwasher | 9 |
| 16***69 | Tooth As-Ripper | 1 |
| 16***70 | Bolt-Socket Head; (M30x3.5x100-mm) | 1 |
173-1691 Jaw Gp-Shear -Scrap
| 17***22 | Pin | 1 |
| 17***23 | Bushing | 2 |
| 17***24 | Spacer; (180x194x42-mm Thk) | 1 |
179-6773 Jaw Gp-Shear
| 15***22 | Lockwasher | 9 |
| 16***83 | Tooth; (Crusher) | 9 |
| 16***69 | Tooth As-Ripper | 1 |
179-6774 Jaw Gp-Shear
| 15***22 | Lockwasher | 2 |
| 16***83 | Tooth; (Crusher) | 2 |
| 16***69 | Tooth As-Ripper | 1 |
169-6009 Jaw Gp-Shear -Scrap
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 16***09 | Jaw Group-Shear; -Scrap | 1 |
| 16***74 | Shim; (0.5-mm Thk) | 24 |
179-6772 Jaw Gp-Shear
| 15***22 | Lockwasher | 3 |
| 16***83 | Tooth; (Crusher) | 3 |
| 17***72 | Jaw Group-Shear | 1 |
179-2074 Jaw Gp-Shear
| 17***12 | Jaw As-Lower | 1 |
| 17***24 | Jaw As-Upper | 1 |
| 17***25 | Edge Group-Cutting; -Shear | 1 |
172-5923 Jaw Gp-Shear -Scrap
| 16***71 | Pin | 1 |
| 16***78 | Spacer; (128x139x30-mm Thk) | 1 |
| 16***79 | Shim; (2.5-mm Thk) | 2 |
172-5936 Jaw Gp-Shear -Plate
| 16***41 | Bushing | 2 |
| 16***17 | Jaw As-Lower | 1 |
| 16***28 | Jaw As-Upper | 1 |
179-2076 Jaw Gp-Shear -Plate
| 15***21 | Lockwasher | 2 |
| 16***09 | Nut; (M100x4-Thd) | 1 |
| 17***23 | Bushing | 2 |
179-6771 Jaw Gp-Shear
| 15***22 | Lockwasher | 6 |
| 16***83 | Tooth; (Crusher) | 6 |
| 17***71 | Jaw Group-Shear | 1 |
179-6780 Jaw Gp-Shear
| 15***22 | Lockwasher | 3 |
| 17***80 | Jaw Group-Shear | 1 |
| 28***00 | Tooth | 3 |
169-6042 Tooth Gp-Crusher
| 15***22 | Lockwasher | 4 |
| 16***42 | Tooth Group-Crusher | 1 |
| 16***69 | Tooth As-Ripper | 1 |
169-6040 Tooth Gp-Crusher
| 15***22 | Lockwasher | 6 |
| 16***40 | Tooth Group-Crusher | 1 |
| 28***00 | Tooth | 6 |
173-1674 Tooth Gp-Crusher
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 14***52 | Elbow As. | 2 |
| 15***18 | Lockwasher | 8 |
172-5899 Tooth Gp-Crusher
| 15***22 | Lockwasher | 2 |
| 16***68 | Tooth As | 1 |
| 17***99 | Tooth Group-Crusher | 1 |
173-1673 Tooth Gp-Crusher
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***46 | Seal | 1 |
| 15***18 | Lockwasher | 8 |
169-6038 Tooth Gp-Crusher
| 15***22 | Lockwasher | 6 |
| 16***38 | Tooth Group-Crusher | 1 |
| 28***00 | Tooth | 6 |
169-0369 Tooth Gp-Crusher
| 15***22 | Lockwasher | 2 |
| 16***69 | Tooth Group-Crusher | 1 |
| 16***69 | Tooth As-Ripper | 1 |
169-6043 Tooth Gp-Crusher
| 16***77 | Lockwasher | 6 |
| 16***42 | Tooth | 6 |
| 16***43 | Tooth Group-Crusher | 1 |
169-7107 Tooth Gp-Crusher
| 16***77 | Lockwasher | 3 |
| 16***42 | Tooth | 3 |
| 16***07 | Tooth Group-Crusher | 1 |
172-2208 Tooth Gp-Crusher
| 16***77 | Lockwasher | 4 |
| 16***42 | Tooth | 4 |
| 17***08 | Tooth Group-Crusher | 1 |
172-5893 Tooth Gp-Crusher
| 15***22 | Lockwasher | 2 |
| 16***67 | Tooth As | 1 |
| 17***93 | Tooth Group-Crusher | 1 |
173-1675 Tooth Gp-Crusher
| 14***78 | Lockwasher | 36 |
| 15***21 | Lockwasher | 22 |
| 16***09 | Nut; (M100x4-Thd) | 3 |
169-6039 Tooth Gp-Crusher
| 15***22 | Lockwasher | 3 |
| 16***39 | Tooth Group-Crusher | 1 |
| 28***00 | Tooth | 3 |
169-6041 Tooth Gp-Crusher
| 15***22 | Lockwasher | 11 |
| 16***41 | Tooth Group-Crusher | 1 |
| 16***69 | Tooth As-Ripper | 1 |
172-5910 Tooth Gp-Crusher
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***46 | Seal | 1 |
| 15***18 | Lockwasher | 8 |
184-7152 Tooth Gp-Uni
| 16***59 | Housing Group-Multi-Processor | 1 |
| 16***60 | Rotator Group-Hydraulic | 1 |
| 18***52 | Tooth Group-Uni | 1 |
184-7153 Tooth Gp-Uni
| 16***60 | Rotator Group-Hydraulic | 1 |
| 17***58 | Housing Group-Multi-Processor | 1 |
| 18***53 | Tooth Group-Uni | 1 |
MP30 serial number reference
The serial plate is riveted or bolted to the side of the multi-processor housing (the main body/frame near the cylinder mount or bracket pivot), separate from both the interchangeable jaw's own tag and the carrier excavator's PIN. Cat work tools use an 8-character serial number rather than a full 17-character PIN: read the first three characters as the prefix, which identifies the production range/configuration, and the digits that follow as the sequential unit number. Match the housing prefix (not the jaw prefix) against parts documentation when ordering housing-specific components.
| Prefix | Identifies | Notes |
|---|---|---|
| ALE | MP30 multi-processor housing, earliest documented range | Oldest MP30 serial range found in Cat compatibility documentation, alongside ABX and MPH; reported from the late 1990s. Confirm the exact cutoff with your dealer. |
| ABX | MP30 multi-processor housing, early-2000s range | Listed in the same compatibility documentation as ALE and MPH; reported from around the early 2000s. Confirm the exact cutoff with your dealer. |
| MPH | MP30 multi-processor housing, later production range | Appears in both a Cat compatibility bulletin and separate mounting-bracket parts coverage; reported from around 2010 onward. Two independent listings agree on this range. |
| M2Y | MP30 multi-processor housing, companion range to MPH | Listed together with MPH in mounting-bracket parts coverage from the same era (around 2010 onward), consistent with a parallel configuration or running change also seen on sibling multi-processor sizes. Confirm with your dealer which of MPH/M2Y applies to your unit. |
| JMY | MP30 interchangeable jaw group (jaw attachment serial range, not the housing PIN) | Covers shear, crusher, combination, and pulverizer jaw groups built for the MP30 housing. This is the jaw assembly's own serial range under Cat's work-tool numbering, separate from the housing's PIN. Distinct from the jaw ranges used on the MP15/MP20/MP40 siblings. |
Frequently asked questions
Does the Caterpillar MP30 have an engine?
No. The MP30 is a bare hydraulic work tool with no engine, fuel system, or coolant circuit of its own. Jaw open/close and continuous 360-degree rotation run entirely off the carrier excavator's own hydraulic pump and work-tool circuit, with the jaw cylinder fed up to roughly 300 L/min (79 US gpm) at up to about 350 bar (5,076 psi) and the rotator fed up to roughly 40 L/min (10.6 US gpm) at up to about 140 bar (2,031 psi). Heat generated by the tool circuit is handled by the carrier excavator's own hydraulic cooling system, not by the tool.
What is the operating weight of the Caterpillar MP30?
Installed weight (housing, jaw, and bracket) runs about 3,600 kg (7,937 lb) with Concrete Cutter, Shear, or Crusher jaws; about 3,650 kg (8,047 lb) with Secondary Pulverizer jaws; and about 3,700 kg (8,157 lb) with Tank Shear or Primary Pulverizer jaws. These figures cover the tool alone and do not include the mounting bracket or quick-coupler adapter, which adds further installed weight.
What replaced the Caterpillar MP30?
Cat's current catalog centers on the three-digit MP300-series Multi-Processors (MP318, MP324, MP332, and larger models), which use the same one-housing, multiple-interchangeable-jaw concept as the MP30 but are the current-generation product line. Cat's parts system has recently flagged the MP30 as non-current, consistent with that shift, though no formal document ties the MP30 to a single named direct successor model, so treat the MP300 series as the practical current-catalog replacement rather than a confirmed one-to-one designation.
What MP30 owners discuss
How does the MP30's hydraulic "speed booster" actually behave in the field?
The jaw circuit runs fast and low-force until the jaws meet resistance, then a booster valve automatically shifts flow to raise closing force at reduced speed. Operators notice the jaw visibly slow down and "dig in" right as it contacts material - that is the valve doing its job, not the carrier stalling. If the jaw stays slow through the whole stroke with no speed change on open air, or never gets more bite under load, treat the booster valve or its pilot signal as the first suspect before blaming the carrier's main pump.
Which wears out first on this kind of jaw tool - the tips or the pins?
Cutting edges and teeth wear first no matter which jaw is fitted: shear and concrete-cutter blades dull and chip, pulverizer teeth round over. Most reported wear shows up right at the tip/blade contact zone, which is why bolt-on replaceable tips and blades exist - crews swap them without welding or grinding. Pins and bushings wear next, especially on jaws cycled hard through reinforced concrete or mixed debris; check for play at the pivot by hand well before it shows up as slop in how the jaw closes.
What should I watch on the rotation bearing?
The 360° rotation housing rides on a slewing-type bearing with grease points, not a sealed-for-life unit. Crews that skip greasing it or over-grease it both report early seal failure and eventual bearing play - over-greasing can blow the seals just as easily as running it dry glazes the race. Rotate the housing through a full turn while greasing so grease reaches the whole bearing, not just the fitting side. Roughness or a catch felt while rotating under light load is the early warning sign; don't wait for full play to show up before checking clearance. Have your dealer verify bearing clearance if you feel any roughness - a failed rotation bearing under load is a safety issue, not just a maintenance one.
Do the different jaw sets (concrete cutter, shear, tank shear, crusher/primary pulverizer, secondary pulverizer) behave differently day to day?
Yes, and this is the most consistent theme in field discussion. Primary/crusher jaws take the first, hardest, most contaminated bite on reinforced concrete and lean on abrasion-resistant teeth to survive shock loading from irregular demolition debris. Secondary pulverizer jaws are built to separate crushed concrete from rebar and cleanly cut the exposed steel, so they see more sustained abrasive wear than impact damage. Shear and tank shear jaws are for structural steel and plate - shear blades need periodic edge rotation or resharpening, while tank shear blades are set up for mixed plate thickness rather than fine material separation. Swapping jaw sets on the housing is a same-shift job with hand tools, but crews consistently say to budget real time for cleaning and greasing the pin bores at each swap rather than just pulling and reinserting pins.
What hydraulic or seal problems come up most often on these multi-processors?
The lock cylinder that retains each jaw-change pin is a recurring seal-wear point - worn seals let the cylinder lose holding pressure, and the pin can back out or fail to fully seat, which shows up as a jaw that won't sit tight or a lock indicator that won't confirm. Cycling the jaw-change or quick-coupler hydraulics at high engine RPM instead of idle is repeatedly called out as a way to blow a seal or damage a hose fitting during a jaw swap. On the carrier side, running any fixed-jaw processor or pulverizer on an excavator outside its rated class is blamed for cracked booms and premature main-pump or cylinder wear from shock loading. Have your dealer verify the jaw-change lock cylinder and pin bores before returning the tool to service if a jaw ever fails to lock solid - an unlatched jaw is a dropped-load hazard, not a cosmetic issue.
Are there quirks tied to matching an MP30 to the right carrier rather than whatever excavator is on-site?
Because Multi-Processor sizing tracks carrier weight class, mismatching the tool to too small or too large a machine is the complaint that comes up repeatedly - flow/pressure mismatch either starves the booster valve of the flow it needs or overworks the carrier's hydraulics and structure. The MP30 is built for carriers in the roughly 30-45 tonne excavator class rather than compact or oversized machines. Pairing it correctly avoids most of the shock-loading complaints (boom stress cracks, chewed-up pins, short pump life) that show up when a processor jaw is forced onto an undersized carrier.
What should I check before buying a used MP30?
Cycle every fitted jaw through a full open, close, and 360° rotation and watch for uneven speed, hesitation at the booster transition point, or binding in rotation. Check pin and bushing play at each pivot by hand - looseness there is the earliest sign of hard use and is costly to correct. Inspect jaw tips and blades for remaining wear metal and confirm they are the bolt-on replaceable style rather than already built up with field welding, which points to deferred maintenance. If possible, pull a jaw-change lock pin and check the lock cylinder seals and pin bore condition rather than taking a solid-looking jaw at face value. Ask for jaw-swap and application history - steady concrete/rebar work wears differently than mixed demolition or light processing duty. Have your dealer verify pin and bushing clearances against factory spec and pressure-test the rotation and booster circuits before relying on the tool for load-bearing or safety-critical cuts.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar MP30. Related factory variants of the same model family:
MP30
Need a specific MP30 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.