Caterpillarexcavator
Caterpillar M316C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar M316C is a wheeled hydraulic excavator, not a tracked machine, in the roughly 16 to 18 metric ton class. It runs the Cat 3056E DIT ATAAC inline six-cylinder diesel rated at 103 kW (138 hp) net, built to the mechanical-injection, pre-DPF/SCR emissions standards typical of its era (exact tier not confirmed for this model — verify with your dealer). Production runs approximately 2005 to 2011, spanning at least two serial-prefix ranges (BDX and H2C) as Cat updated the design mid-run. Operating weight lands around 16.3 to 18.2 metric tons (35,900 to 40,100 lb) depending on boom, stick, outrigger, and counterweight choice, so treat any single figure as an approximation. Cat offered it with a mono boom or a two-piece variable-angle (VA) boom paired with a 2.1 m or 2.4 m stick, bucket capacities from about 0.35 to 1.0 m³ (0.5 to 1.3 yd³), and a choice of dual pneumatic, dual solid, or single wide tires, plus pin-on radial or parallel outriggers and a dozer blade for digging stability.
Cat's wheeled excavator line moved on from the M316C to the M316D (roughly 2007 to 2015), which switched to a Cat C6.6 ACERT engine to meet tighter Tier 3 and Tier 4 Interim rules. That is a different engine generation from the 3056E, so parts and service specs do not carry over between the two. The current M316 generation has since moved again, to a Cat C4.4 engine under Tier 4 Final and Stage V rules. Within the M316C's own run, the BDX-to-H2C serial break marks a mid-life update to axle, brake, and hydraulic detailing rather than a full model change. On the used and parts market, the M316C's draw is mechanical simplicity: no diesel particulate filter or SCR aftertreatment to maintain, and an engine platform shared with other Cat 3056E machines of the same period, which keeps parts sourcing and rebuild options wider than on newer, emissions-heavier wheeled excavators.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar M316C specifications
Engine
| Model years | Approx. 2005-2011 production run; single engine offering across this generation (not to be confused with the later, unrelated current-generation Cat M316 wheeled excavator, which uses a different C4.4 engine). |
| Engine model | Cat 3056E DIT ATAAC (direct-injection, turbocharged, air-to-air aftercooled), 6-cylinder inline diesel |
| Gross power | 103 kW (138 hp) at 2000 rpm |
| Net power | 103 kW (138 hp) at 2000 rpm |
| Net torque | 625 Nm (461 lb-ft) at 1400 rpm |
| Displacement | 6.0 L / 5,998 cc (366 cu in) |
| Bore x stroke | 99 mm x 127 mm (3.9 in x 5.0 in) |
| Aspiration | Turbocharged with air-to-air aftercooling |
| Emissions tier | EEC 80/1269 rated (EU type-approval mark for this era). Exact EPA/Stage tier designation is not confirmed in available documentation for this model - verify with your dealer using the machine serial number. |
Weights
| Operating weight (typical/reference configuration) | 17,850 kg (39,353 lb) |
| Base/minimum operating weight (rear dozer + front outriggers, short config) | 17,350 kg (38,250 lb) |
| Rear dozer only, no outriggers | 16,308-16,757 kg (35,940-36,930 lb), varies by boom/stick configuration |
| Front and rear outriggers (both ends) | 17,698-18,198 kg (39,020-40,120 lb), varies by boom/stick configuration |
| Rear dozer + front outriggers | 17,350-17,849 kg (38,250-39,350 lb), varies by boom/stick configuration |
| Counterweight | 3,701 kg (8,160 lb) |
| Dozer blade weight | 760 kg (1,675 lb) |
| Outrigger set weight | 1,021 kg (2,250 lb) |
| Ground pressure | Not published for this wheeled machine. Ground-pressure figures are normally quoted only for track-mounted excavators; this model rides on pneumatic tires. Contact your dealer if a tire ground-load figure is needed. |
Dimensions
| Transport length | 8.41-8.55 m (27.6-28.1 ft), varies by boom/stick option |
| Transport height | 3.17-3.96 m (10.4-13.0 ft), varies by boom/stick option |
| Tail swing radius | 2.29 m (7.52 ft) |
| Overall width, travel position | 2.54 m (8.33 ft) |
| Overall width, outriggers down | 3.68 m (12.07 ft) |
| Ground clearance | 0.38 m (1.24 ft / 14.9 in) |
| Wheelbase | 2.60 m (8.54 ft) |
| Height to top of cab | 3.17 m (10.41 ft) |
| Counterweight clearance | 1.28 m (4.2 ft) |
| Tire/track width | Wheeled machine on dual pneumatic tires, not tracked - no track shoe width applies. Standard tire size 10.00-20 dual pneumatic; optional 11.00-20 dual pneumatic, 18-R19.5 XF single, 600/40-22.5 single, or 10.00-20 dual solid rubber. |
Performance
| Max digging depth | 5.37-6.07 m (17.6-19.9 ft), varies by stick length (2100/2400/2600 mm sticks) |
| Max reach at ground line | 8.71-9.38 m (28.6-30.8 ft), varies by stick length |
| Max cutting height | 9.00-10.40 m (29.5-34.1 ft), varies by stick length |
| Max dump/loading height | 6.02-7.32 m (19.8-24.0 ft), varies by stick length |
| Max vertical-wall digging depth | 3.49-4.07 m (11.5-13.4 ft), varies by stick length |
| Swing speed | 10.5 rpm |
| Max swing torque | 40.1 kNm (29,575 lb-ft) |
| Max travel speed | 33.8-34.1 kph (21.0-21.2 mph) |
| Creeper speed, 1st/2nd gear | 4.0 kph / 13.0 kph (2.5 mph / 8.1 mph) |
| Gradeability | 69% |
| Max steering angle | 32 degrees |
| Oscillating front-axle angle | 18 degrees total travel |
| Drawbar pull | Not documented in available spec sources for this model - verify with your dealer. |
Forces
| Bucket digging force | Not published in available dealer/spec documentation for this model. Verify with your Cat dealer using the machine serial number for the exact boom, stick, and linkage configuration. |
| Stick (arm) digging force | Not published in available dealer/spec documentation for this model. Verify with your Cat dealer using the machine serial number for the exact boom, stick, and linkage configuration, and note that figures typically differ between short and long stick options. |
Service capacities (summary)
| Fuel tank | 310 L (81.9 gal) |
| Hydraulic system, including tank | 230-231 L (60.8-61 gal) |
| Hydraulic tank only | 136 L (36 gal) |
| Engine oil (crankcase) | 16.3-18.2 L (4.3-4.8 gal); range reflects sump-only vs. with-filter fill |
| Cooling system | 39.0-39.4 L (10.3-10.4 gal) |
| Front steering axle differential | 7.9-10.6 L (2.1-2.8 gal) |
| Rear axle differential | 11.0-14.0 L (2.9-3.7 gal) |
| Powershift transmission | 3.0 L (0.8 gal) |
| Disk brakes | 1.9 L (0.5 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
M316C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 18.2 L (4.8 US gal) with filter change; 16.3 L (4.3 US gal) for a sump-only fill | Cat DEO-ULS (API CK-4) or Cat DEO (API CI-4/CI-4 PLUS) diesel engine oil. SAE 15W-40 for -10 to 50°C (14 to 122°F); SAE 10W-30 for -18 to 40°C (0 to 104°F); Cat DEO-ULS SYN 5W-40 for cold starts down to -30°C (-22°F); Cat DEO Cold Weather 0W-40 for extreme cold to -40°C (-40°F). Engine is the turbocharged, air-to-air aftercooled Cat 3056E used on this generation. |
| Cooling system | 39 L (10.3 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 with water for freeze protection to -37°C (-34°F). Cat DEAC conventional antifreeze with periodic SCA treatment is the alternative. Minimum 30% glycol required, 50% glycol recommended. |
| Fuel tank | 310 L (82 US gal) | Ultra-low sulfur diesel (15 ppm sulfur or less). Biodiesel blends up to B20 are acceptable on this mechanical/electronic fuel system without exhaust aftertreatment; confirm blend limits with your dealer before exceeding B20. |
| Hydraulic tank | 136 L (36 US gal) | Cat HYDO Advanced 10 (SAE 10W) is the typical fill for -20 to 40°C (-4 to 104°F); Cat HYDO Advanced 20 or 30 for warmer climates. Cat BIO HYDO Advanced biodegradable hydraulic oil covers -30 to 45°C (-22 to 113°F) where required. |
| Hydraulic system total (including tank) | 231 L (61 US gal) | Same fluid family as the hydraulic tank: Cat HYDO Advanced 10/20/30 selected by ambient temperature, or Cat BIO HYDO Advanced where a biodegradable oil is required. |
| Front steering axle (differential) | 8 L (2.1 US gal); ranges up to 2.8 US gal (10.6 L) depending on axle configuration | Cat MTO (Multipurpose Tractor Oil) SAE 10W-30, or a commercial oil meeting the Ford/New Holland M2C 134-D specification. Early-production units may instead call for Cat Synthetic GO 75W-140, Cat GO 80W-90/85W-140, or API GL-5 gear oil 75W-90/SAE 90. |
| Rear axle (differential) | 11 L (2.9 US gal); some axle configurations run up to 4.0 US gal (15.1 L) | Same as the front axle: Cat MTO SAE 10W-30 or M2C 134-D equivalent oil, with Cat Synthetic GO/Cat GO/API GL-5 gear oil as the early-production alternative. |
| Final drive (each, wheel-end) | Not separately published for this generation - final drive oil appears to share the axle housing sump listed above; varies by configuration | Same sump as the axle housing: Cat MTO SAE 10W-30 (or M2C 134-D) is the general-production spec. Confirm the exact wheel-end service point and fill quantity with your dealer. |
| Swing drive / swing mechanism | Not documented in available specification sheets for this exact serial range - varies by configuration/series; verify with your dealer | Cat TDTO (Transmission/Drive Train Oil) is the family Caterpillar specifies for excavator swing drives generally: SAE 10W below 0°C (32°F), SAE 30 for moderate climates, SAE 50 above 10°C (50°F), or Cat TDTO-TMS multigrade across a wider temperature span. |
| Grease (all pin, bearing, and swing-gear points) | Spec only - no factory fill quantity published | Cat Prime Application Grease (NLGI 2, moly-fortified) for medium-to-high-severity pin and swing-bearing points; Cat Extreme Application Grease (NLGI 1 or 2) for heavy-impact swing gear and pin joints; Cat Utility Grease (NLGI 2) for light-duty points. Use Cat Extreme Application Grease-Arctic below about -30°C (-22°F) and Cat Extreme Application Grease-Desert in sustained heat. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar M316C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the M316C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the 3056E DIT ATAAC engine oil, axle and differential oil, swing drive gear oil, and hydraulic tank oil on a regular cycle instead of guessing at drain intervals. Wear-metal trends in axle oil catch planetary hub and differential wear before a hub locks up on the road. Hydraulic sampling flags main pump and travel motor wear early. Watch turbo boost and exhaust temperature on the DIT engine; a slow boost drop signals a failing turbocharger or clogged air-to-air aftercooler before it becomes a tow-in.
Corrective & Common Repairs
Common M316C failures center on the wet-disc hub brakes, axle oscillation bushings, and swing gear wear from constant slew work. Leaking boom, stick, and VA-boom offset cylinders are frequent since seals age out on machines this old. The 3056E's turbocharger and air-to-air aftercooler connections are common leak points, showing up as smoke or power loss. Travel motor and axle diff-lock solenoid faults show up as pull-to-one-side steering or a machine that won't lock straight for road travel.
Overhaul & Rebuild Points
At higher hours, plan for a 3056E top-end rebuild covering injectors, turbocharger, and cylinder head before bottom-end wear sets in. The swing gearbox and bearing typically need a rebuild once backlash and grinding show up in the slew. Axle differentials and wet-disc brake packs wear out together and are usually rebuilt as a set, front and rear. Reseal the boom, stick, and bucket cylinders and rebuild the main hydraulic pump and control valve once cycle times slow and drift increases under load.
Seasonal & Environment Servicing
Switch to a lighter engine and hydraulic oil viscosity for winter, and check coolant ELC concentration before cold weather to protect the 3056E's aftercooler circuit. In hot, dusty jobs, clean the air-to-air aftercooler core and engine air filter more often to protect turbo boost. Drop pneumatic tire pressure slightly on soft ground, or fit the solid or single-wheel option for demolition and scrap sites. Grease axle oscillation pins and boom/stick linkage more frequently in mud or sand to keep water and grit out of the pins.
M316C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 067-6897 | Element Kit, Fuel Filter | Fuel system service | Check fitment → |
| 222-9020 | Filter Element As-Air | Air intake service | Check fitment → |
| 185-8154 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 8U-0723 | Filter Element-Oil | Hydraulic service | Check fitment → |
| 109-7289 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
M316C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-03 | Engine Oil Pressure sensor circuit reads voltage above normal range (open circuit). | Open or disconnected sensor wiring, a corroded connector at the oil pressure sensor, or a failed sensor. | Check the sensor connector and harness for damage or corrosion, verify supply and signal voltage against spec, replace the sensor if wiring tests good. |
| 100-04 | Engine Oil Pressure sensor circuit reads voltage below normal range (short to ground). | Chafed harness shorting to frame or block, moisture at the connector, or a failed sensor. | Inspect harness routing near the engine for chafe points, check the connector for water intrusion, replace the sensor if the circuit checks out good. |
| 110-03/04 | Engine Coolant Temperature sensor circuit reads outside normal voltage range (open or shorted circuit). | Damaged sensor wiring, corroded connector pins, or a failed coolant temperature sensor. | Check wiring and connector at the sensor near the thermostat housing, verify sensor resistance against the temperature chart, replace the sensor if wiring is sound. |
| 164-02 | Injection Actuation Pressure sensor signal erratic - the high-pressure oil manifold reading that drives the HEUI injectors is unstable. | A faulty injection actuation pressure sensor, damaged sensor wiring, or a failing HEUI pump or actuation pressure control valve. | Check sensor wiring and connector first, watch actuation pressure on the diagnostic tool at idle and under load, inspect the HEUI pump and control valve if wiring checks out good. |
| 190-08 | Engine speed/timing sensor signal is abnormal (erratic frequency). | Damaged sensor wiring, incorrect sensor air gap, or a failing speed/timing sensor. | Inspect sensor wiring and connector, check and reset the sensor air gap to spec, replace the sensor if the fault stays. |
| 262-XX | 5-Volt sensor supply circuit reads outside normal range; this supply feeds several sensors so one bad code here can trigger others at the same time. | An overloaded 5-volt supply from a shorted sensor circuit sharing that supply, or a failing ECM output driver. | Disconnect the sensors fed by the 5-volt supply one at a time to isolate the shorted circuit before condemning the ECM. |
| 41-XX | 8-Volt (or battery-fed) sensor supply circuit reads outside normal voltage range. | A short to ground on a sensor fed by this supply, a corroded ground strap, or low battery voltage. | Check machine ground straps and battery voltage first, then isolate the sensors on the affected supply circuit. |
| E113 | Warning - High Transmission (travel drive) Oil Pressure. Trips when pressure stays above roughly 3600 kPa (about 520 psi) for more than about 4 seconds with the engine running. | A restricted transmission oil filter, a blocked or pinched pressure line, or a faulty pressure sensor. | Inspect pressure lines for restriction or damage, check and replace the transmission oil filter, confirm the reading against a mechanical gauge before replacing parts. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
M316C attachments & work tools
Buckets
Factory bucket range for the M316C runs about 0.35-0.4 m³ up to roughly 1.0 m³ (0.5-1.3 yd³), sized to the machine's roughly 16.3-18.2 t operating weight class. GD buckets sit toward the top of that capacity window for trenching and loading; HD and rock buckets trend toward the lower-to-mid capacities to keep breakout force and structure strength in balance. The machine ships pin-on as standard, with a hydraulic quick coupler available as a factory/dealer option.
Hydraulic hammers
At its standard operating weight (about 17.8-18.2 t), the M316C falls in the carrier window for Cat's H120-class breaker (rated roughly 17.0-26.0 t carriers, tool service weight near 1.5 t). The next size up, H130 (carrier window roughly 19.0-32.0 t), is oversized for a base-configuration M316C and only suits the heaviest-optioned units. Confirm actual tool-circuit flow and pressure with the dealer before sizing a breaker, since published specs for this model don't break out a dedicated hammer-line flow figure apart from the main implement pump.
Quick couplers
The M316C's operating weight (roughly 16.3-18.2 t) falls inside Cat's CW30 coupler class, rated for 15-25 t excavators, which is the coupler size matching this machine whether fitted as hydraulic or pin-grabber style. Coupler and bucket-pin interfaces on this size class generally follow the same pin-carrier sizing used across the 315-318 crawler-excavator range, so tools built for that class typically cross over.
Thumbs/grapples
Hydraulic thumbs and grapples built for the 15-25 t excavator class fit the M316C through the same coupler/pin interface used for buckets. Running a hydraulic thumb or grapple needs the machine's optional auxiliary tool-hydraulic circuit; a base machine without that option is limited to a mechanically pinned, non-hydraulic thumb. Exact aux-circuit flow and pressure for the M316C aren't published in available factory spec sheets — verify with the dealer before ordering a hydraulic thumb or grapple.
Rippers
No M316C-specific ripper package is documented in available factory literature. A single- or multi-shank ripper attachment built for the 15-25 t excavator/coupler class will interface with the M316C's stick and coupler, but confirm hydraulic clamping or adjustment requirements with the dealer, since a ripper isn't a factory-cataloged option for this model.
Hydraulic-kit notes
Main pump delivers about 245 L/min (64.8 gal/min) at roughly 350 bar (5,076 psi) relief on the implement/travel circuit, which is enough headroom to run a matched-class hammer through a flow-control (regulating) valve. The spec sheet also lists a separate medium-pressure circuit at about 31 bar (450 psi); that's the pilot/control pressure, not a dedicated attachment flow line — a true auxiliary tool circuit is an added/optional circuit, not standard plumbing on this model.
All M316C assemblies by section
Every catalogued assembly group for the Caterpillar M316C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
188-2811 Aftercooler Gp-Air
| 18***11 | Aftercooler Group-Air | 1 |
| 19***53 | Aftercooler As | 1 |
| 19***91 | Plate | 3 |
207-2145 Air Cleaner Gp
| 20***04 | Air Cleaner Group | 1 |
| 20***09 | Switch As-Pressure; (Air Restriction) | 1 |
| 20***45 | Air Cleaner Group | 1 |
207-1704 Air Cleaner Gp
| 20***04 | Air Cleaner Group | 1 |
| 22***51 | Air Cleaner Group | 1 |
| 22***52 | Bracket-Mounting | 1 |
236-1042 Elbow Gp-Air Inlet
| 21***95 | Connector | 1 |
| 21***96 | Gasket | 1 |
| 23***42 | Elbow Group-Air Inlet | 1 |
188-2815 Lines Gp-Air
| 13***55 | U-Bolt | 1 |
| 14***67 | Clamp; (Hose) | 8 |
| 15***03 | Clamp-Hose | 2 |
253-4475 Muffler & Converter
| 14***97 | Gasket | 1 |
| 19***11 | Muffler | 1 |
| 19***15 | Tube-Exhaust | 1 |
198-4678 Muffler Gp
| 11***48 | Plate | 2 |
| 11***21 | Seal; (85-cm Each) | 0 |
| 11***23 | Plate | 2 |
200-3984 Shield Gp-Engine Compartment
| 03***48 | Fitting-Brass | 1 |
| 10***53 | Stud | 6 |
| 10***66 | Gasket | 1 |
237-2264 Turbocharger Gp
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
Basic Engine
216-8620 Camshaft Gp
| 15***56 | Camshaft | 1 |
| 21***20 | Camshaft Group | 1 |
216-9625 Cover Gp-Valve Mechanism
| 10***04 | Gasket | 1 |
| 11***04 | Bolt | 2 |
| 11***04 | Seal-O-Ring | 1 |
236-1702 Cover Gp-Valve Mechanism
| 03***48 | Fitting-Brass | 2 |
| 11***04 | Bolt | 2 |
| 11***04 | Seal-O-Ring | 1 |
216-8316 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
216-8231 Cylinder Block Gp
| 20***18 | Housing As | 1 |
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 21***31 | Cylinder Block Group | 1 |
216-8235 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 14 |
| 06***05 | Plug | 1 |
216-8343 Cylinder Head Gp
| 16***20 | Pin | 2 |
| 21***35 | Cylinder Head Group | 1 |
| 21***43 | Cylinder Head Group | 1 |
216-8335 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 3 |
| 13***50 | Valve-Exhaust | 6 |
| 13***60 | Cap | 12 |
198-4679 Drain Gp-Oil -Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***55 | Adapter | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
217-7875 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 10***76 | Clip | 1 |
| 10***78 | Bolt; (M10x1.5x25-mm) | 1 |
233-2553 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 13***80 | Pulley-Fan Drive | 1 |
| 13***39 | Housing As | 1 |
228-7418 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 22***18 | Fastener Group-Cylinder Head | 1 |
234-2653 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 10***31 | Flywheel As | 1 |
217-1499 Gear Gp-Front
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 21***48 | Gear As-Idler; (31-Teeth) | 1 |
223-9606 Guard Gp-Belt
| 22***15 | Guard As; (Belt) | 1 |
| 22***06 | Guard Group-Belt | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 1 |
234-2651 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
221-6835 Housing Gp-Front
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***97 | Element Kit, Fuel Filter | 1 |
228-7462 Lifting Gp-Engine
| 14***53 | Plate | 1 |
| 14***49 | Plate-Lifting | 1 |
| 22***62 | Lifting Group-Engine | 1 |
273-5559 Mounting Gp-Engine
| 17***77 | Seal-O-Ring | 1 |
| 25***73 | Plug As; (6 Cyl Front Mtg) | 1 |
| 25***74 | Plug As | 6 |
186-0504 Mounting Gp-Engine Flexible
| 12***42 | Washer; (17x75x6-mm Thk) | 4 |
| 18***04 | Mounting Group-Engine Flexible | 1 |
| 18***64 | Mount As | 2 |
248-2276 Mounting Gp-Fan
| 24***76 | Mounting Group-Fan | 1 |
| 6I***17 | Bolt; (M8x1.25x20-mm) | 4 |
216-9551 Pan Gp-Oil
| 11***27 | Tube As | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 1 |
| 11***30 | Clip | 1 |
216-8324 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 12***36 | Ring-Retaining | 2 |
| 13***48 | Bushing | 1 |
239-1349 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 23***49 | Plug Group-Cylinder Block; -Oil Gallery | 1 |
236-6604 Plug Gp-Cylinder Block
| 03***63 | Plug | 2 |
| 23***04 | Plug Group-Cylinder Block | 1 |
235-8214 Pulley Gp-Auxiliary Drive
| 13***81 | Pulley-Fan | 1 |
| 23***14 | Pulley Group-Auxiliary Drive | 1 |
6i-4712 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 8 |
| 11***65 | Pulley | 1 |
| 24***49 | Damper | 1 |
146-8956 Rocker Arm Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 4 |
207-2162 Suppression Gp-Sound
| 20***62 | Suppression Group-Sound | 1 |
| 21***03 | Insulation Group-Sound Suppr | 1 |
| 21***09 | Insulation Group-Sound Suppr | 1 |
216-8619 Valve Mechanism Gp
| 06***95 | Rod | 12 |
| 13***53 | Tappet | 12 |
| 14***56 | Rocker Arm Group | 1 |
Cooling System
228-7387 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 16***36 | Ring; (Water Temperature Regulator) | 1 |
216-9648 Cooler Gp-Fltr Base & Eng Oil
| 11***45 | Connector | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 14 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 5 |
186-0507 Fan Gp-Suction -Engine Coolant, Hydraulic Oil
| 18***07 | Fan Group-Suction; -Engine Coolant, Hydraulic Oil | 1 |
| 19***57 | Adapter | 1 |
| 19***48 | Spider As-Fan; (9-Blade) | 1 |
188-2812 Fan Gp-Suction -Aftercooler
| 10***89 | Bolt; (M8x1.25x130-mm) | 4 |
| 18***12 | Fan Group-Suction; -Aftercooler | 1 |
| 19***59 | Spider As-Fan; (7-Blade) | 1 |
241-3621 Guard Gp-Fan
| 18***08 | Guard Group-Fan; -Radiator | 1 |
| 24***21 | Guard Group-Fan | 1 |
188-2813 Guard Gp-Fan -Aftercooler
| 11***23 | Seal; (87.2-cm) | 0 |
| 15***40 | Nut-Weld; (M8x1.25-Thd) | 2 |
| 18***13 | Guard Group-Fan; -Aftercooler | 1 |
186-0508 Guard Gp-Fan -Radiator
| 11***28 | Spring As-Gas; (Rh) | 1 |
| 11***25 | Spring As-Gas; (Lh)(Rh) | 1 |
| 13***54 | Screw-Flat Head; (M8x1.25x25-mm)(M8x1.25x25mm) | 4 |
238-7016 Guard Gp-Fan -Radiator
| 12***65 | Spring-Gas | 1 |
| 13***54 | Screw-Flat Head; (M8x1.25x25-mm)(M8x1.25x25mm) | 4 |
| 15***40 | Nut-Weld; (M8x1.25-Thd) | 5 |
190-8215 Lines Gp-Coolant
| 06***35 | Fitting-Pipe | 1 |
| 10***73 | Clip | 6 |
| 11***13 | Grommet | 1 |
221-5369 Pump Gp-Water
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
| 14***05 | Cover | 1 |
216-9735 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
186-0505 Radiator Gp
| 11***21 | Seal; (85-cm Each) | 0 |
| 15***24 | Elbow As | 1 |
| 18***05 | Radiator Group | 1 |
198-1685 Tank Gp-Coolant
| 03***19 | Cap As-Radiator | 1 |
| 19***51 | Switch Group-Liquid Level; -Coolant-Hydraulic Oil | 1 |
| 19***85 | Tank Group-Coolant | 1 |
Electrical And Starting System
188-4971 Alarm Gp-Travel
| 06***66 | Washer | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
235-4592 Alternator Gp-Charging
| 06***66 | Washer | 1 |
| 10***62 | Alternator Group-Charging | 1 |
| 11***46 | Pulley | 1 |
245-2703 Alternator Gp-Charging
| 09***92 | Clip | 2 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***61 | Strap; (Cable) | 10 |
186-0483 Battery & Wiring Gp
| 09***92 | Clip | 3 |
| 09***61 | Strap; (Cable) | 10 |
| 09***92 | Washer, Tooth | 1 |
8r-8714 Battery Gp -Heavy Duty
| 09***61 | Strap; (Cable) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
186-0485 Box Gp-Junction
| 09***61 | Strap; (Cable) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
204-7008 Control & Mtg Gp-Machine
| 17***59 | Film-Cover | 1 |
| 20***08 | Control & Mtg Group-Machine | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
242-7205 Control Gp-Communication -Product Link 201
| 20***41 | Control Group-Unprogrammed; -Machine | 1 |
| 21***47 | Film-Identification; (Label) | 1 |
| 24***05 | Control Group-Communication; -Product Link 201 | 1 |
210-6776 Control Gp-Unprogrammed -Machine
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 18***77 | Control Group-Unprogrammed; -Tractor Xmsn Control | 1 |
| 21***76 | Control Group-Unprogrammed; -Machine | 1 |
204-7010 Electronics Gp-Machine
| 20***10 | Electronics Group-Machine | 1 |
| 24***67 | Software Group-Machine; (Soft Switch Panel) | 1 |
| 24***68 | Control Group-Unprogrammed; (Soft Switch Panel) | 1 |
217-9535 Electronics Gp-Machine
| 09***61 | Strap; (Cable) | 6 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***98 | Plate | 2 |
211-8205 Installation Gp-Communication
| 09***61 | Strap; (Cable) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
206-6097 Installation Gp-Security
| 12***52 | Screw | 2 |
| 20***97 | Installation Group-Security | 1 |
| 3T***52 | Locknut; (M8x1.25-Thd) | 1 |
199-3137 Lamp Gp-Flood
| 11***19 | Lamp As; (Headlight) | 2 |
| 12***53 | Lockwasher | 2 |
| 12***54 | Cap | 1 |
193-4287 Lamp Gp-Head
| 11***20 | Glass As; (Rear Lamp) | 1 |
| 11***70 | Screw-Special | 2 |
| 19***87 | Lamp Group-Head | 1 |
191-7538 Lamp Gp-Rear
| 11***19 | Glass As | 1 |
| 11***70 | Screw-Special | 2 |
| 19***38 | Lamp Group-Rear | 1 |
116-9625 Lamp Gp-Rear
| 09***61 | Strap; (Cable) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Lamp Group-Signal | 2 |
116-9626 Lamp Gp-Signal -Front
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 11***26 | Lamp Group-Signal; -Front | 3 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 4 |
193-4288 Lamp Gp-Signal -Front
| 11***21 | Glass | 1 |
| 11***22 | Motor As | 1 |
| 11***23 | Reflector | 1 |
116-9624 Lamp Gp-Signal
| 11***24 | Lamp Group-Signal | 1 |
| 11***18 | Glass As; (Front Signal Lamp) | 1 |
| 11***69 | Screw | 1 |
199-7529 Lamp Gp-Warning Beacon
| 18***47 | Lighting Group-Flood; -Rear | 1 |
| 19***30 | Lighting Group-Flood; -Front | 1 |
| 19***29 | Lamp Group-Warning Beacon | 1 |
116-9627 Lamp Gp-Warning Beacon
| 11***27 | Lamp Group-Warning Beacon | 1 |
| 11***21 | Glass | 1 |
| 11***22 | Motor As | 1 |
195-6851 Lighting Ar-Flood -Front, Rear
| 09***61 | Strap; (Cable) | 15 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
188-4945 Lighting Gp-Flood -Boom
| 12***52 | Screw | 4 |
| 17***19 | Boot | 1 |
| 18***45 | Lighting Group-Flood; -Boom | 1 |
198-4677 Lighting Gp-Flood -Guard, Front
| 11***07 | Clamp; (Lh) | 2 |
| 11***39 | Plate | 1 |
| 12***31 | Plate As | 1 |
196-1130 Lighting Gp-Flood -Front
| 09***61 | Strap; (Cable) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 2 |
188-4947 Lighting Gp-Flood -Rear
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 4 |
| 18***47 | Lighting Group-Flood; -Rear | 1 |
| 19***38 | Lamp Group-Flood; (Front) | 2 |
190-0286 Lighting Gp-Roading
| 09***61 | Strap; (Cable) | 14 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
229-5615 Lighting Gp-Roading
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***67 | Socket-Wiring | 1 |
| 19***65 | Switch As-Rocker; (Warning Beacon) | 1 |
188-4948 Lighting Gp-Roading -Stick
| 18***48 | Lighting Group-Roading; -Stick | 1 |
| 19***38 | Lamp Group-Rear | 1 |
| 19***87 | Lamp Group-Head | 1 |
188-4949 Lighting Gp-Warning Beacon
| 11***21 | Reflector-Yellow | 4 |
| 18***49 | Lighting Group-Warning Beacon | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
193-4289 Reflector Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***89 | Reflector Group | 1 |
| 19***75 | Float | 1 |
196-5649 Sensor Gp-Fuel Level
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 2 |
| 19***49 | Sensor Group-Fuel Level | 1 |
| 19***79 | Sensor As-Position; (Swashplate Angle) | 1 |
199-2976 Sensor Gp-Position -Swashplate
| 06***98 | Nut; (3/8-24-Thd) | 2 |
| 06***99 | Ferrule | 2 |
| 10***07 | Washer | 2 |
228-7461 Starting Aid Gp -Air Inlet Heater
| 10***61 | Starting Motor Group-Electric | 1 |
| 11***85 | Ring | 1 |
| 22***61 | Starting Aid Group; -Air Inlet Heater | 1 |
217-5883 Starting Aid Gp -Lines
| 21***83 | Starting Aid Group; -Lines | 1 |
| 24***63 | Lockwasher | 1 |
| 25***60 | Heater As; (Air Inlet) | 1 |
176-2540 Starting Motor Gp-Electric
| 17***40 | Starting Motor Group-Electric | 1 |
| 22***50 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
234-2656 Starting Motor Gp-Electric
| 23***56 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***91 | Float | 1 |
| 19***92 | Ring | 1 |
196-5651 Switch Gp-Liquid Level -Coolant
| 09***61 | Strap; (Cable) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***01 | Switch Group-Pressure; (Overload Pressure) | 1 |
188-4970 Switch Gp-Rocker -Overload Warning Device
| 18***70 | Switch Group-Rocker; -Overload Warning Device | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
9g-7641 Switch Gp-Start
| 09***61 | Strap; (Cable) | 9 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
238-4739 Wiring Gp-Boom
| 09***61 | Strap; (Cable) | 5 |
| 09***92 | Washer, Tooth | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
221-9037 Wiring Gp-Cab -Front Window, 1-Piece
| 09***61 | Strap; (Cable) | 30 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
187-3799 Wiring Gp-Cab
| 09***61 | Strap; (Cable) | 5 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
186-0486 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 41 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
209-8865 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 10 |
| 09***92 | Washer, Tooth | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
202-1136 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 10 |
| 09***92 | Washer, Tooth | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
188-4968 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 15 |
| 09***92 | Washer, Tooth | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
187-3798 Wiring Gp-Console
| 10***58 | Bolt; (M8x1.25x14-mm) | 3 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
217-9151 Wiring Gp-Engine
| 10***58 | Bolt; (M8x1.25x14-mm) | 3 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
211-7985 Wiring Gp-Fan -Radiator
| 09***61 | Strap; (Cable) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
213-6476 Wiring Gp-Hammer
| 09***61 | Strap; (Cable) | 20 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
188-4954 Wiring Gp-Undercarriage/Swivel
| 09***61 | Strap; (Cable) | 20 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
211-8208 Wiring Gp-Work Tool
| 11***70 | Pin | 1 |
| 11***30 | Plate As | 2 |
| 11***33 | Axle Ar-Front | 1 |
Engine Arrangement
188-5097 Engine Ar-Primary
| 17***40 | Starting Motor Group-Electric | 1 |
| 18***97 | Engine Ar-Primary | 1 |
| 19***72 | Connector Group-Cab Heater Lines | 1 |
186-0480 Installation Ar-Engine
| 18***80 | Installation Ar-Engine | 1 |
| 18***04 | Mounting Group-Engine Flexible | 1 |
| 18***05 | Radiator Group | 1 |
Frame And Body
250-0119 Counterweight Gp
| 11***23 | Ring-Retaining | 2 |
| 19***93 | Door As | 1 |
| 19***93 | Hinge As | 2 |
188-4349 Counterweight Gp
| 18***49 | Counterweight Group | 1 |
| 25***22 | Counterweight As | 1 |
186-0491 Door Gp-Access -Lh, Front
| 10***40 | Ring; (Retaining) | 2 |
| 18***91 | Door Group-Access; -Lh, Front | 1 |
| 19***11 | Pin | 2 |
193-8989 Door Gp-Access -Engine, Side
| 12***48 | Seal; (70-cm) | 0 |
| 12***38 | Screw-Machine; (M6x1x16-mm) | 5 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 2 |
211-4593 Door Gp-Access -Side, Lh
| 11***23 | Ring-Retaining | 2 |
| 14***42 | Lock Assem. | 1 |
| 19***11 | Pin | 2 |
195-6308 Door Gp-Access -Engine, Upper
| 19***08 | Door Group-Access; -Engine, Upper | 1 |
| 20***73 | Door As | 1 |
| 6V***57 | Latch As-Handle | 1 |
233-2981 Door Gp-Access -Engine, Upper
| 09***24 | Bolt; (M12x1.75x80-mm) | 1 |
| 11***29 | Spring-Gas | 1 |
| 11***26 | Spring-Gas | 1 |
219-5284 Door Gp-Access -Cab Riser
| 12***48 | Seal; (70-cm) | 0 |
| 12***38 | Screw-Machine; (M6x1x16-mm) | 5 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 2 |
201-5675 Door Gp-Access -Tool Box
| 11***23 | Ring-Retaining | 2 |
| 19***11 | Pin | 2 |
| 20***75 | Door Group-Access; -Tool Box | 1 |
190-0292 Enclosure Gp-Engine
| 09***24 | Bolt; (M12x1.75x80-mm) | 1 |
| 11***29 | Spring-Gas | 1 |
| 11***26 | Spring-Gas | 1 |
190-0293 Enclosure Gp-Engine
| 11***23 | Ring-Retaining | 2 |
| 11***03 | Bumper | 2 |
| 12***00 | Seal; (106.5cm) | 0 |
196-5700 Enclosure Gp-Radiator
| 11***24 | Seal; (308-cm) | 0 |
| 12***61 | Step As | 1 |
| 12***03 | Cover Group-Cab Riser | 1 |
188-4961 Frame Gp-Cab Riser
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
190-8200 Frame Gp-Upper
| 08***11 | Spacer; (20.6x38x6-mm Thk) | 34 |
| 12***29 | Plate-Swing Bearing | 1 |
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
190-8206 Gear & Bearing Gp-Swing
| 11***24 | Cover-Rear; (Lh)(Rear, Lh) | 2 |
| 11***27 | Cover; (Rh Front) | 1 |
| 11***86 | Cover-Rear; (Rh)(Rh Rear) | 2 |
190-8208 Guard Gp-Bottom
| 18***91 | Door Group-Access; -Lh, Front | 1 |
| 18***92 | Step Group | 1 |
| 19***92 | Enclosure Group-Engine | 1 |
190-0291 Hood & Guard Ar
| 19***91 | Hood & Guard Ar | 1 |
| 21***05 | Insulation | 1 |
| 21***06 | Insulation | 1 |
210-0603 Insulation Gp-Sound Suppr
| 21***03 | Insulation Group-Sound Suppr | 1 |
| 21***16 | Insulation | 1 |
| 21***17 | Insulation | 1 |
210-0609 Insulation Gp-Sound Suppr
| 11***30 | Fitting-Adapter | 4 |
| 11***31 | Fitting-Coupler | 4 |
| 11***34 | Fitting-Straight | 2 |
214-8993 Lines Gp-Grease -Swing Gear
| 11***30 | Fitting-Adapter | 4 |
| 11***31 | Fitting-Coupler | 4 |
| 11***34 | Fitting-Straight | 2 |
235-1832 Lines Gp-Grease -Oscillating Axle
| 11***96 | Angle | 2 |
| 11***25 | Seal; (89.5 cm) | 0 |
| 19***10 | Plate As | 1 |
200-3983 Panel Gp-Sound Suppression
| 11***25 | Seal; (89.5 cm) | 0 |
| 19***10 | Plate As | 1 |
| 19***14 | Plate As | 1 |
244-2415 Shield Gp-Heat
| 19***94 | Step As | 1 |
| 19***95 | Sheet | 1 |
| 19***99 | Sheet | 1 |
186-0492 Step Gp
| 18***92 | Step Group | 1 |
| 19***95 | Sheet | 1 |
| 22***70 | Sheet | 1 |
194-9213 Step Gp
| 11***87 | Seal; (132-cm) | 0 |
| 19***13 | Step Group | 1 |
| 19***14 | Step As | 1 |
194-9212 Step Gp-Tool Box
| 11***87 | Seal; (132-cm) | 0 |
| 19***12 | Step Group-Tool Box | 1 |
| 19***14 | Step As | 1 |
206-1351 Step Gp-Tool Box
| 11***69 | Snubber | 1 |
| 11***70 | Buffer | 1 |
| 11***82 | Boss | 1 |
190-0294 Walkway Gp
| 11***69 | Snubber | 1 |
| 11***70 | Buffer | 1 |
| 12***09 | Spring As-Gas; (Rh) | 1 |
Fuel System
141-7844 Base Gp-Fuel Filter
| 14***44 | Base Group-Fuel Filter | 2 |
235-6347 Filter Gp-Fuel
| 23***47 | Filter Group-Fuel; -Secondary | 1 |
| 5W***50 | Clamp-Hose | 2 |
| 5W***54 | Coupling-Hose | 1 |
8u-0876 Hose Gp-Refueling
| 03***49 | Plug | 2 |
| 06***69 | Olive-Fuel Tube | 3 |
| 11***13 | Grommet | 2 |
186-0502 Lines Gp-Fuel
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 18***02 | Lines Group-Fuel | 1 |
235-6367 Lines Gp-Fuel Filter
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***77 | Stud | 3 |
| 10***74 | Stud | 1 |
235-6331 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***77 | Stud | 3 |
| 10***74 | Stud | 1 |
216-9131 Pump Gp-Fuel Transfer
| 03***49 | Plug | 3 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 3 |
| 06***69 | Olive-Fuel Tube | 9 |
188-4937 Pump Gp-Fuel Transfer
| 03***49 | Plug | 3 |
| 06***69 | Olive-Fuel Tube | 3 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
138-3097 Separator Gp-Water
| 13***97 | Separator Group-Water; -Fuel | 1 |
| 15***27 | Tube As-Drain | 1 |
| 16***92 | Clip | 2 |
190-8209 Tank & Mtg Gp-Fuel
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 1 |
| 13***56 | Seal-O-Ring | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
196-1774 Tank Gp-Fuel
| 19***74 | Tank Group-Fuel | 1 |
| 19***80 | Valve Group-Flow Control; -Fuel Shutoff | 2 |
| 19***16 | Lever | 1 |
145-7210 Valve Gp-Fuel Shutoff
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 14***10 | Valve Group-Fuel Shutoff | 1 |
Hydraulic System
8u-7274 Accumulator As-Hydraulic -Charged
| 8U***74 | Accumulator As-Hydraulic; -Charged | 1 |
8u-6159 Accumulator Gp-Hydraulic -Charged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 8U***59 | Accumulator Group-Hydraulic; -Charged | 1 |
5w-9971 Accumulator Gp-Hydraulic -Charged
| 5W***71 | Accumulator Group-Hydraulic; -Charged | 1 |
8u-2924 Accumulator Gp-Hydraulic -Charged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 8U***24 | Accumulator Group-Hydraulic; -Charged | 1 |
8u-3661 Accumulator Gp-Hydraulic -Uncharged
| 8U***61 | Accumulator Group-Hydraulic; -Uncharged | 1 |
255-8549 Accumulator Gp-Hydraulic -Uncharged
| 06***39 | Seal-O-Ring | 2 |
| 11***99 | Nut-Cap; (M12x1-Thd) | 1 |
| 11***25 | Nut; (M12x1-Thd) | 1 |
207-4704 Actuator Gp
| 20***04 | Actuator Group | 1 |
207-4706 Actuator Gp
| 11***17 | Rod; (129.6-mm Lg) | 1 |
| 11***20 | Spring | 1 |
| 12***95 | Piston | 1 |
159-8010 Actuator Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***32 | Piston | 9 |
117-5710 Actuator Gp-Pump
| 11***10 | Actuator Group-Pump | 1 |
| 11***23 | Rod; (119.3-mm Lg) | 1 |
| 11***24 | Rod; (119.1-mm Lg) | 1 |
117-5712 Actuator Gp-Pump
| 11***12 | Actuator Group-Pump | 1 |
| 15***44 | Cover | 1 |
| 15***45 | Cover | 1 |
199-2395 Barrel Gp-Pump
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***93 | Screw; (M3x0.5x8-mm)(M3x0.5x8mm) | 2 |
140-1800 Barrel Gp-Pump
| 11***16 | Screw | 7 |
| 13***02 | Disc | 1 |
| 13***03 | Plate | 1 |
179-9932 Barrel Gp-Pump
| 11***62 | Shaft-Drive | 1 |
| 11***64 | Liner | 1 |
| 11***65 | Cage | 1 |
187-3794 Control Gp-Brake
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***93 | Screw; (M3x0.5x8-mm)(M3x0.5x8mm) | 2 |
134-9680 Coupling Gp-Flexible
| 13***80 | Coupling Group-Flexible | 2 |
| 7X***74 | Bolt | 8 |
275-4912 Coupling Gp-Flexible
| 27***12 | Coupling Group-Flexible | 1 |
| 6V***87 | Bolt; (M20x2.5x55-mm) | 8 |
| 7Y***58 | Washer; (21x37x3-mm Thk) | 8 |
111-1897 Cylinder & Mtg Gp-Axle Lock
| 11***97 | Cylinder & Mtg Group-Axle Lock | 1 |
| 22***99 | Cylinder Group-Axle Osc Lock | 2 |
| 30***29 | Bolt; (M20x2.5x55-mm) | 8 |
183-8935 Cylinder & Seal Gp-Boom
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 18***14 | Cylinder Group-Bucket | 1 |
| 18***35 | Cylinder & Seal Group-Boom | 1 |
183-8934 Cylinder & Seal Gp-Boom
| 18***12 | Cylinder Group-Boom | 1 |
| 18***34 | Cylinder & Seal Group-Boom | 1 |
| 7X***03 | Seal (Id=90.00mm); (Od=106.15mm) | 2 |
183-8933 Cylinder & Seal Gp-Boom
| 09***34 | Shim; (T=69.85mm) | 2 |
| 18***11 | Cylinder Group-Boom | 1 |
| 18***33 | Cylinder & Seal Group-Boom | 1 |
183-8937 Cylinder & Seal Gp-Bucket
| 09***34 | Shim; (T=69.85mm) | 4 |
| 18***13 | Cylinder Group-Stick | 1 |
| 18***37 | Cylinder & Seal Group-Bucket | 1 |
183-8936 Cylinder & Seal Gp-Stick
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 4 |
| 18***36 | Cylinder & Seal Group-Stick | 1 |
226-3699 Cylinder Gp-Axle Osc Lock
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***11 | Cylinder | 1 |
252-7305 Cylinder Gp-Blade
| 08***07 | Stop | 1 |
| 11***18 | Head | 1 |
| 11***56 | Bearing; (Sleeve) | 1 |
221-3545 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***11 | Cylinder | 1 |
296-3242 Cylinder Gp-Boom
| 08***36 | Ring-Backup | 1 |
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 1 |
| 09***32 | Seal; (Id=129.60mm) | 1 |
183-8912 Cylinder Gp-Boom
| 08***07 | Stop | 1 |
| 11***18 | Head | 1 |
| 11***56 | Bearing; (Sleeve) | 1 |
183-8910 Cylinder Gp-Boom
| 08***07 | Stop | 1 |
| 11***18 | Head | 1 |
| 11***56 | Bearing; (Sleeve) | 1 |
296-3243 Cylinder Gp-Boom
| 09***54 | Ring; (Buck Up) | 1 |
| 09***39 | Ring; (Retaining) | 1 |
| 10***41 | Ring; (Retaining) | 1 |
296-3244 Cylinder Gp-Boom
| 09***19 | Ring, Back-Up | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***00 | Ring-Retaining | 1 |
296-3241 Cylinder Gp-Boom
| 08***07 | Stop | 1 |
| 11***18 | Head | 1 |
| 11***56 | Bearing; (Sleeve) | 1 |
183-8911 Cylinder Gp-Boom
| 08***36 | Ring-Backup | 1 |
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 1 |
| 09***32 | Seal; (Id=129.60mm) | 1 |
183-8914 Cylinder Gp-Bucket
| 18***14 | Cylinder Group-Bucket | 1 |
| 18***37 | Cylinder As | 1 |
| 22***99 | Seal; (Wiper) | 1 |
185-1738 Cylinder Gp-Bucket
| 09***19 | Ring, Back-Up | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***00 | Ring-Retaining | 1 |
296-3245 Cylinder Gp-Bucket
| 16***23 | Kit-Valve; (Quick Coupler)(Lock) | 1 |
| 20***97 | Kit-Seal; (Coupler Cylinder) | 1 |
| 29***45 | Cylinder Group-Bucket | 1 |
169-0329 Cylinder Gp-Coupler
| 11***20 | Seal-O-Ring | 1 |
| 11***31 | Pin | 1 |
| 11***19 | Seal | 1 |
144-5970 Cylinder Gp-Offset -Boom Swing
| 11***16 | Ring | 1 |
| 11***17 | Ring | 2 |
| 11***27 | Ring-Backup | 1 |
8u-6848 Cylinder Gp-Axle Osc Lock
| 12***42 | Seal-O-Ring | 1 |
| 22***41 | Ring-Backup | 1 |
| 23***42 | Cylinder | 1 |
188-4991 Cylinder Gp-Stabilizer
| 09***54 | Ring; (Buck Up) | 1 |
| 09***39 | Ring; (Retaining) | 1 |
| 10***41 | Ring; (Retaining) | 1 |
183-8913 Cylinder Gp-Stick
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
| 11***75 | Ring-Split | 1 |
249-1278 Distributor Gp-Swivel
| 11***27 | Flange | 1 |
| 21***88 | Hub-Clutch | 1 |
| 24***78 | Distributor Group-Swivel | 1 |
217-5636 Drive Gp-Pump
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***03 | Bolt-Socket Head; (M16x2x35-mm) | 12 |
| 15***74 | Motor Group-Swing | 1 |
117-7985 Drive Gp-Swing
| 08***84 | Washer | 6 |
| 08***85 | Washer | 6 |
| 09***19 | Ring-Retaining | 3 |
152-7375 Drive Gp-Swing
| 15***75 | Drive Group-Swing | 1 |
| 8U***22 | Holder-Filter | 1 |
| 8U***23 | Filter Element-Oil; (Hydraulic Oil Return) | 1 |
8u-0198 Filter Gp-Oil -Hydraulic
| 10***89 | Filter Element As-Oil; (Standard Efficiency)(Swing Circuit) | 1 |
| 11***51 | Housing | 1 |
| 11***95 | Seal-O-Ring | 1 |
109-7288 Filter Gp-Oil -Hydraulic, Swing Circuit
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 10***89 | Filter Element As-Oil; (Standard Efficiency)(Swing Circuit) | 1 |
| 14***46 | Housing | 1 |
145-7750 Filter Gp-Oil -Hydraulic, Pilot
| 10***87 | Filter Element-Oil; (Standard Efficiency)(Hydraulic Oil Filter) | 1 |
| 11***04 | Tube | 1 |
| 11***05 | Valve | 1 |
193-5973 Filter Gp-Oil -Hydraulic
| 09***00 | Seal-O-Ring | 1 |
| 19***26 | Seal-O-Ring | 1 |
| 19***27 | Ring-Backup | 1 |
163-4210 Fitting Gp-Hydraulic -Quick Disconnect
| 16***10 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 19***14 | Ring-Backup | 1 |
| 6V***70 | Seal-O-Ring (Id=19.40mm) | 2 |
188-7655 Fitting Gp-Hydraulic
| 18***55 | Fitting Group-Hydraulic | 1 |
| 8U***66 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***67 | Cap; (Protection)(Pressure) | 1 |
347-7715 Fitting Gp-Hydraulic -Quick Disconnect
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 23***57 | Pipe | 1 |
| 23***58 | Block | 2 |
125-5387 Fitting Gp-Hydraulic -Quick Disconnect
| 12***87 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 12***41 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
8u-0966 Fitting Gp-Hydraulic -Quick Disconnect
| 12***41 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 8U***66 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***11 | Cap - Protection | 2 |
176-6765 Fitting Gp-Hydraulic -Quick Disconnect
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 4 |
| 17***65 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***09 | Cap - Protection | 4 |
236-2428 Gauge Gp-Sight
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***00 | Plug | 2 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***89 | Seal-O-Ring | 4 |
| 23***93 | Seal-O-Ring | 4 |
190-8124 Head Gp-Motor
| 08***72 | Plug-O-Ring | 2 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 3 |
| 11***68 | Pin | 2 |
117-5708 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***28 | Screw | 2 |
136-7781 Head Gp-Pump
| 11***96 | Swivel & Mounting Group | 1 |
| 11***97 | Cylinder & Mtg Group-Axle Lock | 1 |
| 13***81 | Head Group-Pump | 1 |
186-0473 Hydraulic Ar-Lower -Lower
| 18***73 | Hydraulic Ar-Lower; -Lower | 1 |
| 18***99 | Pump & Mtg Group-Pilot; -Brake, Steering | 1 |
| 18***75 | Lines Group-Pilot; -Operator | 1 |
186-0479 Hydraulic Ar-Upper
| 11***57 | Clamp | 12 |
| 12***43 | Clamp; (8.92mm Id) | 12 |
| 18***32 | Tube As | 1 |
185-3410 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 2 |
| 11***25 | Clamp-Double | 6 |
| 14***72 | Elbow Group | 1 |
185-3416 Lines Gp-Auxiliary Hydraulic
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 11***57 | Clamp | 6 |
| 12***43 | Clamp; (8.92mm Id) | 6 |
185-3404 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 4 |
| 11***25 | Clamp-Double | 10 |
| 14***72 | Elbow Group | 1 |
185-3676 Lines Gp-Auxiliary Hydraulic
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 11***24 | Clamp-Single | 6 |
| 13***29 | Clamp-Single | 6 |
185-3739 Lines Gp-Auxiliary Hydraulic -Offset Boom
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***66 | Hose Assem. | 1 |
| 14***18 | Connector As | 1 |
185-3731 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 2 |
| 11***25 | Clamp-Double | 6 |
| 17***16 | Plate As | 2 |
185-3678 Lines Gp-Auxiliary Hydraulic -Offset Boom
| 11***24 | Clamp-Single | 4 |
| 11***25 | Clamp-Double | 10 |
| 17***16 | Plate As | 2 |
185-3398 Lines Gp-Auxiliary Hydraulic
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 11***57 | Clamp | 2 |
| 12***43 | Clamp; (8.92mm Id) | 2 |
185-3735 Lines Gp-Auxiliary Hydraulic
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 11***24 | Clamp-Single | 6 |
| 11***11 | Clamp | 6 |
188-7647 Lines Gp-Blade Cyl & Valve
| 14***74 | Elbow As | 4 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
| 18***47 | Lines Group-Blade Cyl & Valve | 1 |
188-7637 Lines Gp-Blade Cylinder
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 2 |
| 11***57 | Clamp | 6 |
| 11***86 | Clamp-Single | 1 |
185-3386 Lines Gp-Boom
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 10 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 32 |
| 11***86 | Clamp-Single | 1 |
185-3392 Lines Gp-Boom -Variable Adjustable
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 24 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
185-3674 Lines Gp-Boom -Offset
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 8 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 8 |
185-3378 Lines Gp-Boom Cylinder
| 11***49 | Fitting; (Quick Disconnect, Male) | 2 |
| 11***54 | Cap | 2 |
| 12***09 | Elbow | 2 |
122-7012 Lines Gp-Bucket Tilt Cylinder
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
| 12***74 | Hose As | 1 |
| 13***65 | Hose As | 1 |
185-3429 Lines Gp-Check Valve
| 14***54 | Plate | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
185-3433 Lines Gp-Check Valve -Stick Cylinder
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 11***72 | Hose As | 1 |
185-3438 Lines Gp-Check Valve -Boom Cylinder
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 2 |
| 18***38 | Lines Group-Check Valve; -Boom Cylinder | 1 |
185-3382 Lines Gp-Check Valve -Boom Cylinder
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***90 | Elbow Group | 1 |
202-4100 Lines Gp-Connecting
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 8 |
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 4 |
185-3442 Lines Gp-Diverter Valve
| 11***86 | Clamp-Single | 4 |
| 14***12 | Guide | 1 |
| 18***42 | Lines Group-Diverter Valve | 1 |
187-7242 Lines Gp-Front
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 14***30 | Connector As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
188-7617 Lines Gp-Hydraulic
| 11***14 | Bracket As | 2 |
| 11***51 | Clamp-Single | 2 |
| 11***02 | Clamp-Single | 6 |
188-7606 Lines Gp-Hydraulic -Blade/Stabilizer
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 8 |
| 11***05 | Clamp-Single | 2 |
| 12***22 | Bolt; (M14x2x50-mm) | 2 |
188-7627 Lines Gp-Hydraulic
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 8 |
| 11***23 | Clamp-Single | 2 |
| 12***22 | Bolt; (M14x2x50-mm) | 2 |
233-8259 Lines Gp-Hydraulic
| 11***51 | Clamp-Single | 2 |
| 11***02 | Clamp-Single | 6 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
233-8261 Lines Gp-Hydraulic -Dozer, Stabilizer, Front
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
| 11***24 | Clamp-Single | 1 |
| 12***33 | Hose As | 1 |
233-8260 Lines Gp-Hydraulic
| 14***57 | Union Bulkhead; (Orfs) | 1 |
| 14***52 | Union As | 2 |
| 23***85 | Hose As | 2 |
188-7622 Lines Gp-Hydraulic
| 14***19 | Hose As | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 1 |
| 14***52 | Union As | 2 |
188-7631 Lines Gp-Hydraulic Fan
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
| 11***24 | Clamp-Single | 1 |
| 12***33 | Hose As | 1 |
187-7371 Lines Gp-Load Control Valve -Drift Reduction, Stick
| 12***82 | Hose As | 1 |
| 13***48 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
187-7370 Lines Gp-Load Control Valve -Drift Reduction, Boom
| 09***61 | Bolt-Socket Head | 4 |
| 12***33 | Hose As | 1 |
| 13***48 | Hose As | 1 |
187-7373 Lines Gp-Load Control Valve -Drift Reduction, Stick
| 11***53 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
187-7372 Lines Gp-Load Control Valve -Drift Reduction, Bucket
| 12***33 | Hose As | 1 |
| 12***57 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
187-7374 Lines Gp-Load Control Valve -Drift Reduction, Var Adj Boom
| 11***34 | Hose As | 1 |
| 11***36 | Hose As | 2 |
| 11***67 | Hose As | 1 |
188-7581 Lines Gp-Pilot
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 2 |
| 10***78 | Union | 1 |
187-3775 Lines Gp-Pilot -Operator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***16 | Fitting | 1 |
| 11***89 | Hose As | 1 |
188-4976 Lines Gp-Pilot -Hammer, Extension
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
| 11***99 | Nut-Hex; (M33x1.5-Thd) | 2 |
| 11***44 | Hose As | 1 |
187-3777 Lines Gp-Pilot -Platform Travel
| 11***24 | Clamp-Single | 1 |
| 11***25 | Clamp-Double | 7 |
| 13***54 | Hose As | 4 |
188-4963 Lines Gp-Pilot -Upper, Extension
| 11***94 | Hose As | 1 |
| 11***53 | Hose As | 1 |
| 14***83 | Clamp-Single | 2 |
188-4975 Lines Gp-Pilot -Variable Adjustable Extension
| 11***25 | Clamp-Double | 1 |
| 12***32 | Hose As | 2 |
| 16***70 | Connector As | 2 |
190-0297 Lines Gp-Pilot -Upper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 2 |
| 10***78 | Union | 1 |
243-2225 Lines Gp-Pilot -Control Pattern Change
| 12***62 | Washer; (19x34x3-mm Thk) | 7 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 7 |
| 13***29 | Hose As; (Charge Pump Discharge Pressure) | 3 |
188-4964 Lines Gp-Pilot -Brake, Extension
| 11***25 | Clamp-Double | 1 |
| 12***32 | Hose As | 2 |
| 16***70 | Connector As | 2 |
188-4962 Lines Gp-Pilot -Operator, Extension
| 11***77 | Hose As | 1 |
| 16***70 | Connector As | 1 |
| 18***62 | Lines Group-Pilot; -Operator, Extension | 1 |
207-2170 Lines Gp-Pilot -Travel, Extension
| 11***57 | Hose As | 2 |
| 12***07 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
188-7611 Lines Gp-Pressure Test
| 10***16 | Flange | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***66 | Hose | 1 |
188-7596 Lines Gp-Pump
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 11***34 | Hose As | 1 |
| 12***01 | Hose As | 1 |
188-7591 Lines Gp-Return
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 11***34 | Hose As | 1 |
| 12***01 | Hose As | 1 |
188-7642 Lines Gp-Stabilizer
| 11***11 | Clamp | 1 |
| 13***72 | Hose As | 1 |
| 13***08 | Hose As | 1 |
188-4967 Lines Gp-Steering -Extension
| 14***18 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 6 |
188-7601 Lines Gp-Steering
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
185-3460 Lines Gp-Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 12 |
| 12***13 | Cover-Flange | 2 |
| 12***96 | Flange-Half | 2 |
185-3459 Lines Gp-Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 12 |
| 12***13 | Cover-Flange | 2 |
| 12***96 | Flange-Half | 2 |
185-3461 Lines Gp-Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 12 |
| 12***13 | Cover-Flange | 2 |
| 12***96 | Flange-Half | 2 |
185-3463 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
185-3457 Lines Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
185-3464 Lines Gp-Stick -Auxiliary Hydraulic
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
185-3465 Lines Gp-Stick -Medium Pressure
| 14***77 | Elbow As. | 2 |
| 14***58 | Union, 90 Deg -6 | 2 |
| 15***99 | Clamp-Single | 2 |
185-3468 Lines Gp-Stick
| 11***53 | Cap | 2 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 2 |
| 11***24 | Clamp-Single | 6 |
185-3462 Lines Gp-Stick -Auxiliary Hydraulic
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
185-3458 Lines Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
242-1703 Lines Gp-Stick -Medium Pressure Function
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
185-3467 Lines Gp-Stick -Auxiliary Hydraulic
| 14***77 | Elbow As. | 2 |
| 14***58 | Union, 90 Deg -6 | 2 |
| 15***99 | Clamp-Single | 2 |
242-1707 Lines Gp-Stick -High Pressure
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 14***54 | Plate | 1 |
185-3466 Lines Gp-Stick
| 14***77 | Elbow As. | 2 |
| 14***58 | Union, 90 Deg -6 | 2 |
| 15***99 | Clamp-Single | 2 |
185-3682 Lines Gp-Stick Cylinder -Offset Boom
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 11***54 | Hose As | 2 |
| 14***18 | Connector As | 2 |
188-7586 Lines Gp-Swing Motor
| 12***02 | Screw | 1 |
| 12***12 | Seal-O-Ring | 1 |
| 12***73 | Plug | 1 |
210-0696 Manifold Gp-Control
| 19***02 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 19***58 | Plate | 1 |
| 21***96 | Manifold Group-Control | 1 |
186-0509 Motor & Mtg Gp-Hydraulic Fan
| 09***69 | Bolt | 4 |
| 10***65 | Seal-O-Ring | 1 |
| 18***09 | Motor & Mtg Group-Hydraulic Fan | 1 |
207-2169 Motor & Mtg Gp-Travel
| 09***19 | Ring-Retaining | 1 |
| 12***76 | Nut; (M14x1.5-Thd) | 1 |
| 20***60 | Valve Group-Solenoid & Relief; (Hydraulic Fan Motor) | 1 |
197-4602 Motor Gp-Gear -Hydraulic Fan
| 09***95 | Pin, Dowel | 1 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 6 |
| 15***22 | Rotating Group-Motor | 1 |
152-7374 Motor Gp-Swing
| 03***28 | Seal-O-Ring | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 11***24 | Setscrew-Socket; (M12x1.75-Thd) | 1 |
211-0062 Motor Gp-Travel
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 19***28 | Pump Group-Gear; -Hydraulic Fan | 1 |
| 21***62 | Motor Group-Travel | 1 |
188-4941 Pump & Mtg Gp-Hydraulic Fan
| 18***41 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 19***11 | Pump Group-Main Hydraulic | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 12 |
190-8210 Pump & Mtg Gp-Main Hydraulic
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 2 |
| 19***10 | Pump & Mtg Group-Main Hydraulic | 1 |
| 19***24 | Pump Group-Gear; -Auxiliary, Brake, Pilot, Steering | 1 |
186-0499 Pump & Mtg Gp-Pilot -Brake, Steering
| 11***17 | Dowel | 4 |
| 18***99 | Pump & Mtg Group-Pilot; -Brake, Steering | 1 |
| 19***20 | Seal-O-Ring | 1 |
196-8428 Pump Gp-Gear -Hydraulic Fan
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 2 |
| 18***91 | Washer-Hard; (16.4x28x7-mm Thk) | 2 |
| 19***12 | Pump Group-Piston; -Implement, Travel, Work Tool | 1 |
196-8424 Pump Gp-Gear -Aux, Brake, Pilot, Steering
| 09***61 | Bolt-Socket Head | 4 |
| 11***17 | Dowel | 4 |
| 17***37 | Shim; (3.0-mm Thk) | 4 |
190-8211 Pump Gp-Main Hydraulic
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***08 | Head Group-Pump | 1 |
| 11***10 | Actuator Group-Pump | 1 |
190-8213 Pump Gp-Piston -Swing, Charge
| 10***11 | Shim; (0.5-mm Thk) | 1 |
| 11***44 | Seal-O-Ring | 1 |
| 13***01 | Cover | 1 |
190-8212 Pump Gp-Piston -Implement, Travel, Work Tool
| 08***28 | Plug | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***26 | Pin | 1 |
191-0885 Rotating Gp-Motor
| 09***24 | Ring-Retaining | 1 |
| 18***87 | Kit-Bearing; (Hydraulic Motor) | 1 |
| 19***85 | Rotating Group-Motor; -Hydrostatic Drive | 1 |
157-0422 Rotating Gp-Motor
| 15***22 | Rotating Group-Motor | 1 |
| 19***85 | Rotating Group-Motor; -Hydrostatic Drive | 1 |
| 19***87 | Shaft Group-Hydraulic Motor | 1 |
190-8122 Rotating Gp-Motor
| 12***55 | Shim; (4.5-mm Thk) | 1 |
| 12***56 | Shim; (4.6-mm Thk) | 1 |
| 12***57 | Shim; (4.7-mm Thk) | 1 |
191-0887 Shaft Gp-Hydraulic Motor
| 18***91 | Cylinder Group-Stabilizer | 2 |
| 18***93 | Stabilizer Group | 1 |
| 18***42 | Lines Group-Stabilizer | 1 |
180-2653 Shaft Gp-Hydraulic Motor
| 09***50 | Ring-Retaining | 1 |
| 18***53 | Shaft Group-Hydraulic Motor | 1 |
| 19***56 | Kit-Bearing | 1 |
235-1827 Stabilizer Ar
| 09***61 | Strap; (Cable) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
188-4992 Stabilizer Ar
| 18***92 | Stabilizer Ar | 3 |
| 19***97 | Conversion Ar-Machine | 1 |
187-3796 Steering Column Gp
| 09***85 | Clamp; (Hose) | 2 |
| 12***49 | Nut-Speed | 12 |
| 12***83 | Screw-Pan Head | 12 |
176-5133 Steering Column Gp
| 09***85 | Clamp; (Hose) | 2 |
| 12***49 | Nut-Speed | 12 |
| 12***83 | Screw-Pan Head | 12 |
111-1896 Swivel & Mounting Gp
| 11***96 | Swivel & Mounting Group | 1 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 5 |
| 2Y***81 | Lockwasher | 6 |
249-1277 Swivel Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Bolt-Socket Head; (M4x0.7x60-mm) | 4 |
117-1738 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 11***38 | Swivel Group | 1 |
| 13***69 | Swivel Group | 1 |
8u-5851 Swivel Gp
| 11***38 | Swivel Group | 1 |
| 2Y***81 | Lockwasher | 2 |
| 5W***95 | Plate-Torque | 1 |
111-2015 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
139-3369 Swivel Gp
| 09***40 | Seal-O-Ring | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 13***69 | Swivel Group | 1 |
261-0378 Swivel Gp
| 19***70 | Tank Group-Hydraulic | 1 |
| 19***24 | Switch As-Pressure; (Hydraulic Return Filter, Restriction) | 1 |
| 26***78 | Swivel Group | 1 |
195-0704 Swivel Gp -Electric
| 11***93 | Lockwasher | 2 |
| 19***04 | Swivel Group; -Electric | 1 |
| 24***78 | Distributor Group-Swivel | 1 |
139-3368 Swivel Gp
| 12***46 | Lockwasher | 2 |
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 2 |
| 13***68 | Swivel Group | 1 |
190-8214 Tank & Mtg Gp-Hydraulic
| 03***92 | Seal; (126.59mm Id) | 1 |
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
197-0370 Tank Gp-Hydraulic
| 03***92 | Seal; (126.59mm Id) | 1 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
187-7378 Valve & Lines Gp-Auxiliary -Hammer
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 14***34 | Tee As-Orfs | 1 |
187-7375 Valve & Lines Gp-Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***34 | Hose As | 1 |
187-7376 Valve & Lines Gp-Auxiliary -Combined Function
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***71 | Hose As | 1 |
| 11***84 | Clamp | 1 |
187-7366 Valve & Lines Gp-Auxiliary -Medium Pressure
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
187-7379 Valve & Lines Gp-Auxiliary -Quick Coupler
| 11***24 | Clamp-Single | 1 |
| 12***32 | Hose As | 1 |
| 16***70 | Connector As | 1 |
188-4958 Valve & Lines Gp-Auxiliary -Hammer, Extension
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 1 |
| 18***58 | Valve & Lines Group-Auxiliary; -Hammer, Extension | 1 |
| 19***52 | Valve Group-Control; -Medium Pressure | 1 |
195-2944 Valve & Mtg Gp-Control -Medium Pressure
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 19***48 | Valve Group-Main Control | 1 |
| 19***44 | Valve & Mtg Group-Control; -Medium Pressure | 1 |
187-7207 Valve & Mtg Gp-Main Control
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 11***35 | Washer | 1 |
| 11***37 | Screw | 1 |
211-0081 Valve Gp-Brake Control
| 11***45 | Lever | 1 |
| 21***81 | Valve Group-Brake Control | 1 |
| 8U***01 | Boot | 1 |
249-5527 Valve Gp-Brake Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***75 | Housing | 1 |
| 11***76 | Retainer-Spring | 2 |
176-7800 Valve Gp-Brake Control
| 17***00 | Valve Group-Brake Control | 1 |
| 17***19 | Orifice | 1 |
| 19***08 | Valve As-Shuttle | 1 |
202-4095 Valve Gp-Check -Boom Cylinder
| 03***13 | Seal-O-Ring | 2 |
| 06***39 | Seal-O-Ring | 2 |
| 11***07 | Plug Group-Control Valve | 3 |
173-4387 Valve Gp-Check -Boom Cylinder
| 03***21 | Ring-Back-Up | 1 |
| 14***36 | Housing | 1 |
| 14***37 | Housing | 1 |
119-9045 Valve Gp-Check -Load Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 11***75 | Housing | 1 |
191-2778 Valve Gp-Combination
| 17***80 | Locknut | 1 |
| 19***78 | Valve Group-Combination; -Combined Function | 1 |
| 22***82 | Valve Group-Relief; -Line | 1 |
212-6749 Valve Gp-Combination -Medium Pressure
| 16***23 | Kit-Valve; (Quick Coupler)(Lock) | 1 |
| 17***77 | Fitting As; (Quick Disconnect, Male) | 1 |
| 17***71 | Switch Group-Pressure; (Quick Coupler) | 1 |
176-9667 Valve Gp-Control -Quick Coupler
| 03***13 | Seal-O-Ring | 1 |
| 06***39 | Seal-O-Ring | 2 |
| 11***07 | Plug Group-Control Valve | 3 |
192-3183 Valve Gp-Control -Variable Adjustable
| 16***54 | Seal-O-Ring | 5 |
| 19***83 | Valve Group-Control; -Variable Adjustable | 1 |
| 20***69 | Valve Group-Solenoid | 2 |
192-3176 Valve Gp-Control -Hydraulic Hammer
| 03***13 | Seal-O-Ring | 1 |
| 03***34 | Seal-O-Ring | 1 |
| 06***39 | Seal-O-Ring | 2 |
199-1162 Valve Gp-Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***96 | Lever | 1 |
| 13***11 | Shim | 1 |
199-1152 Valve Gp-Control -Medium Pressure
| 12***12 | Seal-O-Ring | 1 |
| 17***80 | Locknut | 1 |
| 18***04 | Bolt-Socket Head | 2 |
171-7016 Valve Gp-Diverter -Boom Cyl, Rod End
| 16***54 | Seal-O-Ring | 1 |
| 17***16 | Valve Group-Diverter; -Boom Cyl, Rod End | 1 |
129-6666 Valve Gp-Diverter -Boom Cyl, Head End
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***96 | Lever | 1 |
| 12***66 | Valve Group-Diverter; -Boom Cyl, Head End | 1 |
196-7480 Valve Gp-Flow Control -Fuel Shutoff
| 00***92 | Seal-O-Ring | 1 |
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 2 |
195-1907 Valve Gp-Flow Control
| 15***88 | Ring | 1 |
| 15***89 | Washer | 1 |
| 15***37 | Pin-Grooved | 1 |
202-4093 Valve Gp-Load Control -Variable Adjustable Boom
| 03***21 | Ring-Back-Up | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 14***36 | Housing | 1 |
202-4096 Valve Gp-Load Control -Boom Cylinder
| 03***13 | Seal-O-Ring | 1 |
| 03***34 | Seal-O-Ring | 5 |
| 06***39 | Seal-O-Ring | 2 |
202-4094 Valve Gp-Load Control -Stick Cylinder
| 03***21 | Ring-Back-Up | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 14***36 | Housing | 1 |
194-7848 Valve Gp-Main Control
| 19***48 | Valve Group-Main Control | 1 |
| 19***47 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 19***48 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
197-2247 Valve Gp-Manual
| 11***53 | Handle | 1 |
| 19***47 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
197-2248 Valve Gp-Manual
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 09***33 | Ring-Retaining | 1 |
| 12***17 | Plug | 1 |
173-7992 Valve Gp-Manual -Auxiliary, Shutoff
| 09***83 | Ring-Back Up | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***47 | Handle | 1 |
190-8653 Valve Gp-Motor Control
| 06***40 | Seal-O-Ring (Id=37.69mm) | 1 |
| 08***74 | Nozzle | 1 |
| 12***69 | Plug | 2 |
190-8655 Valve Gp-Motor Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***68 | Rod-Threaded | 1 |
| 12***69 | Spring | 1 |
148-7291 Valve Gp-Pilot Relief
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***32 | Lock-Pin | 1 |
| 14***91 | Valve Group-Pilot Relief | 1 |
224-2983 Valve Gp-Pressure Reducing
| 10***93 | Retainer | 2 |
| 11***09 | Piston-Control | 1 |
| 11***24 | Setscrew | 1 |
221-3103 Valve Gp-Pressure Reducing
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***06 | Ring | 3 |
| 14***00 | Nut-Hex; (M8x1-Thd) | 1 |
208-0207 Valve Gp-Pump Control
| 11***19 | Ring-Backup | 1 |
| 20***07 | Valve Group-Pump Control | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
139-8929 Valve Gp-Pump Control -Swing
| 11***99 | Plug | 1 |
| 11***00 | Piston-Control | 1 |
| 11***04 | Piston-Control | 1 |
117-5784 Valve Gp-Pump Control -Flow Compensator
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 1 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 1 |
| 13***20 | Valve As | 1 |
199-3057 Valve Gp-Pump Control -Hydraulic Horsepower
| 08***72 | Plug-O-Ring | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 1 |
191-3952 Valve Gp-Relief -Travel Brake
| 19***52 | Valve Group-Relief; -Crossover-Counterbalance | 1 |
| 20***50 | Kit-Seal; (Relief Valve) | 1 |
177-7122 Valve Gp-Relief
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
| 3E***66 | Seal-O-Ring | 1 |
224-2982 Valve Gp-Relief -Line
| 12***94 | Bolt | 1 |
| 12***96 | Washer | 1 |
| 12***97 | Spring | 1 |
214-3916 Valve Gp-Relief -Line, Makeup
| 12***57 | Ring | 1 |
| 12***93 | Ring | 1 |
| 21***16 | Valve Group-Relief; -Line, Makeup | 1 |
126-5674 Valve Gp-Relief -Crossover
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 12***74 | Valve Group-Relief; -Crossover | 1 |
| 12***81 | Plug | 1 |
236-8008 Valve Gp-Relief -Pilot
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***76 | Ring-Backup | 1 |
| 14***77 | Ring-Backup | 1 |
126-5675 Valve Gp-Relief -Steering High Pressure Cutoff
| 12***94 | Bolt | 2 |
| 12***96 | Washer | 2 |
| 12***97 | Spring | 2 |
142-3952 Valve Gp-Relief -Line, Medium Pressure
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 1 |
196-7486 Valve Gp-Solenoid
| 17***77 | Seal-O-Ring | 1 |
| 17***28 | Cover | 1 |
| 17***70 | Seal-O-Ring | 1 |
196-7543 Valve Gp-Solenoid
| 17***77 | Seal-O-Ring | 1 |
| 17***28 | Cover | 1 |
| 17***70 | Seal-O-Ring | 1 |
208-7751 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***51 | Valve Group-Solenoid | 1 |
214-3914 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***30 | Kit-Seal; (Solenoid Valve)(Generator Solenoid Valve) | 1 |
214-3915 Valve Gp-Solenoid
| 18***34 | Cylinder & Seal Group-Boom | 2 |
| 18***36 | Cylinder & Seal Group-Stick | 1 |
| 18***78 | Lines Group-Boom Cylinder | 1 |
205-8069 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***72 | Bolt-Socket Head; (M4x0.07-Thd) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
202-4725 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***76 | Ring-Backup | 1 |
| 14***77 | Ring-Backup | 1 |
199-1153 Valve Gp-Solenoid
| 12***75 | Body | 1 |
| 16***54 | Seal-O-Ring | 4 |
| 18***66 | Body-Valve | 1 |
196-7544 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***76 | Ring-Backup | 1 |
| 14***77 | Ring-Backup | 1 |
Implements
193-4456 Boom Ar -1 Piece
| 18***33 | Cylinder & Seal Group-Boom | 2 |
| 18***35 | Cylinder & Seal Group-Boom | 1 |
| 18***36 | Cylinder & Seal Group-Stick | 1 |
207-2151 Boom Ar-Offset
| 18***33 | Cylinder & Seal Group-Boom | 2 |
| 18***35 | Cylinder & Seal Group-Boom | 1 |
| 18***36 | Cylinder & Seal Group-Stick | 1 |
193-4482 Boom Ar-Variable Adjustable -Variable Adjustable
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***84 | Shim (1.0 mm Thick) | 1 |
193-4455 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
193-4470 Boom Gp-Fore
| 08***55 | Spacer; (93x130x8-mm Thk) | 1 |
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
207-2152 Boom Gp-Offset
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 3 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
193-4475 Boom Gp-Stub
| 11***29 | Tube As | 3 |
| 11***30 | Fitting-Adapter | 11 |
| 11***31 | Fitting-Coupler | 14 |
185-3420 Lines Gp-Grease -1 Piece Boom
| 11***29 | Tube As | 1 |
| 11***30 | Fitting-Adapter | 17 |
| 11***31 | Fitting-Coupler | 18 |
185-3424 Lines Gp-Grease -Variable Adjustable Boom
| 11***29 | Tube As | 1 |
| 11***30 | Fitting-Adapter | 21 |
| 11***31 | Fitting-Coupler | 22 |
185-3680 Lines Gp-Grease -Offset Boom
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
| 12***14 | Pin Group-Excavator | 1 |
| 12***86 | Hinge & Bearing As | 1 |
193-4546 Linkage Ar-Bucket
| 18***37 | Cylinder & Seal Group-Bucket | 1 |
| 19***37 | Linkage Group-Bucket | 1 |
| 19***46 | Linkage Ar-Bucket | 1 |
193-4547 Linkage Ar-Bucket
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 3 |
| 09***42 | Seal Bkt To Stk & Link | 2 |
122-7007 Linkage Ar-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***07 | Linkage Ar-Bucket | 1 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
128-6184 Linkage Ar-Bucket
| 12***84 | Linkage Ar-Bucket | 1 |
| 18***37 | Cylinder & Seal Group-Bucket | 1 |
| 18***42 | Lines Group-Diverter Valve | 1 |
193-4537 Linkage Gp-Bucket
| 11***13 | Hook As-Rh | 1 |
| 11***14 | Hook As-Lh | 1 |
| 19***37 | Linkage Group-Bucket | 1 |
224-3861 Lock Gp-Transport
| 12***59 | Pin As | 1 |
| 12***62 | Pin | 1 |
| 12***57 | Plate | 1 |
123-4968 Pin Gp-Excavator
| 12***68 | Pin Group-Excavator | 1 |
| 22***78 | Pin As | 2 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 2 |
228-6195 Pin Gp-Excavator
| 11***39 | Bracket As | 1 |
| 22***95 | Pin Group-Excavator | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
122-7014 Pin Gp-Excavator
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 11***35 | Pin As | 2 |
| 12***14 | Pin Group-Excavator | 1 |
123-4967 Pin Gp-Excavator
| 10***78 | Pin | 2 |
| 12***67 | Pin Group-Excavator | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
111-1919 Restraint Gp-Travel
| 11***19 | Restraint Group-Travel | 1 |
| 11***13 | Hook As-Rh | 1 |
| 11***14 | Hook As-Lh | 1 |
126-1575 Restraint Gp-Travel
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 11***58 | Pin As | 2 |
| 11***48 | Bracket | 1 |
188-4993 Stabilizer Gp
| 18***57 | Lines Group-Stick | 1 |
| 18***93 | Stabilizer Group | 1 |
| 19***11 | Stick Group-Hoe | 1 |
193-4526 Stick Ar
| 19***26 | Stick Ar | 1 |
| 24***97 | Stick Group-Hoe | 1 |
| 24***03 | Lines Group-Stick; -Medium Pressure Function | 1 |
193-4512 Stick Ar
| 18***58 | Lines Group-Stick | 1 |
| 19***12 | Stick Ar | 1 |
| 19***16 | Stick Group-Hoe | 1 |
193-4517 Stick Ar
| 18***59 | Lines Group-Stick | 1 |
| 19***17 | Stick Ar | 1 |
| 19***23 | Stick Group-Hoe | 1 |
235-1830 Stick Ar-Material Handling
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
193-4523 Stick Gp-Hoe
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***18 | Shim; (2-mm Thk) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
193-4511 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
241-0297 Stick Gp-Hoe
| 13***42 | Fitting | 11 |
| 13***43 | Ring | 11 |
| 13***44 | Bolt; (M10x1x12mm) | 1 |
193-4516 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
142-7434 Valve Gp-Lube Distribution
| 10***65 | Shim (1.0mm Thick) | 6 |
| 10***66 | Shim (0.5mm Thick) | 4 |
| 10***67 | Plate | 1 |
142-7433 Valve Gp-Lube Distribution
| 13***42 | Fitting | 7 |
| 13***43 | Ring | 7 |
| 13***44 | Bolt; (M10x1x12mm) | 1 |
Lubrication System
216-9683 Filter Gp-Engine Oil
| 21***83 | Filter Group-Engine Oil | 1 |
| 7W***27 | Filter As-Engine Oil | 2 |
233-2744 Pump Gp-Engine Oil
| 06***33 | Gasket | 1 |
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 11***02 | Housing As | 1 |
Machine Arrangement
186-0476 Chassis Ar
| 11***57 | Literature Group | 1 |
| 11***85 | Drive Group-Swing | 1 |
| 18***76 | Chassis Ar | 1 |
198-4697 Conversion Ar-Machine
| 18***54 | Wiring Group-Undercarriage/Swivel | 1 |
| 18***27 | Lines Group-Hydraulic | 1 |
| 19***97 | Conversion Ar-Machine | 1 |
186-0516 General Ar
| 18***69 | Frame Ar-Undercarriage | 1 |
| 18***73 | Hydraulic Ar-Lower; -Lower | 1 |
| 18***76 | Chassis Ar | 1 |
223-5782 Roading Ar
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
190-0283 Roading Ar -German
227-2947 Roading Ar -Italian
| 22***46 | Plate & Film Group; -Italian | 1 |
| 22***47 | Roading Ar; -Italian | 1 |
| 22***15 | Lighting Group-Roading | 1 |
243-2598 Roading Ar
| 11***78 | Wedge Group-Wheel | 2 |
| 18***48 | Lighting Group-Roading; -Stick | 1 |
| 24***98 | Roading Ar | 1 |
223-5781 Roading Ar
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 15***95 | Film-Identification; (Roading Height) | 1 |
Operator Station
198-4685 Air Conditioner & Mounting Gp
| 19***85 | Air Conditioner & Mounting Group | 1 |
| 20***44 | Angle | 1 |
| 21***32 | Duct As | 1 |
210-1339 Air Conditioner Gp
| 19***14 | Adjuster As | 1 |
| 19***19 | Armrest As | 1 |
| 19***22 | Knob As | 1 |
198-4686 Air Conditioner Gp
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
| 11***40 | Clamp | 2 |
| 16***95 | Strap; (Cable) | 7 |
196-1120 Armrest Gp -Lh
| 18***19 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 18***70 | Monitor & Mtg Group-Operator | 1 |
196-1118 Armrest Gp -Rh
| 19***14 | Adjuster As | 1 |
| 19***18 | Armrest Group; -Rh | 1 |
| 19***21 | Armrest As | 1 |
187-3800 Cab Ar
| 18***00 | Cab Ar | 1 |
| 20***60 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 21***95 | Window Group-Cab; -Front Window, 1-Piece | 1 |
219-8500 Cab Ar -Front Window, 1-Piece
| 18***19 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 18***70 | Monitor & Mtg Group-Operator | 1 |
201-8750 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 4 |
| 10***70 | Grommet | 1 |
188-4959 Cab Gp -Lexan
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 10***70 | Grommet | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
217-2810 Coil Gp-Evaporator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 21***10 | Coil Group-Evaporator | 1 |
186-0512 Compressor Gp-Refrigerant
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 15***53 | Boss | 4 |
| 18***12 | Compressor Group-Refrigerant | 1 |
3e-1906 Compressor Gp-Refrigerant
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 12***42 | Seal-O-Ring | 1 |
| 12***44 | Seal-O-Ring | 1 |
198-4684 Condenser & Mtg Gp-Refrigerant
| 12***45 | Seal-O-Ring | 1 |
| 19***51 | Clamp As | 1 |
| 19***83 | Accumulator As; (Refrigerant) | 1 |
217-3086 Condenser Gp-Refrigerant
| 21***86 | Condenser Group-Refrigerant | 1 |
| 7W***69 | Adapter; (Lubricating Oil Cooler) | 2 |
196-4472 Connector Gp-Cab Heater Lines
| 08***35 | Clevis | 1 |
| 08***36 | Spring Pin | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
187-3767 Console Gp-Operator -Lh
| 08***35 | Clevis | 1 |
| 08***36 | Spring Pin | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
187-3797 Console Gp-Operator
| 11***81 | Plate | 1 |
| 11***84 | Handle | 1 |
| 13***32 | Kit-Spring; (Pilot Valve) | 1 |
187-3782 Console Gp-Operator -Rh
| 12***83 | Screw-Pan Head | 1 |
| 18***67 | Console Group-Operator; -Lh | 1 |
| 18***82 | Console Group-Operator; -Rh | 2 |
193-7789 Control Gp-Hydraulic Hand -Blade, Stabilizer
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***19 | Setscrew | 1 |
| 11***32 | Boot | 1 |
112-5704 Control Gp-Hydraulic Pedal
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 12***04 | Plate | 1 |
| 12***05 | Bellows | 1 |
112-5699 Control Gp-Hydraulic Pedal -Travel
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
| 11***19 | Setscrew | 1 |
222-6205 Control Gp-Joystick
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
243-7058 Control Gp-Monitor
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
188-4972 Control Gp-Pedal
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
187-3793 Control Gp-Pilot Operated Hyd
| 18***93 | Control Group-Pilot Operated Hydraulic | 1 |
219-8494 Cover Gp-Access -Cab Storage
| 13***71 | Plate As | 1 |
| 21***94 | Cover Group-Access; -Cab Storage | 1 |
| 5W***19 | Washer; (9.8x18.5x1.5-mm Thk)(9.8x18.5x1.5-mm Thk) | 8 |
125-4903 Cover Gp-Cab Riser
| 09***39 | Rivet | 4 |
| 12***03 | Cover Group-Cab Riser | 1 |
| 13***39 | Nut; (U-Type Retainer) | 3 |
197-5700 Cover Gp-Console
| 09***39 | Rivet | 4 |
| 13***39 | Nut; (U-Type Retainer) | 2 |
| 15***64 | Cover | 1 |
201-8770 Door & Mtg Gp-Cab -Lexan Polycarbonate Windows
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 09***72 | Nut | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
189-2768 Door & Mtg Gp-Cab
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
| 18***68 | Door & Mtg Group-Cab | 1 |
139-7100 Door Gp-Cab
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 09***84 | Nut-Spring | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
205-0450 Door Gp-Cab -Lexan Polycarbonate Windows
| 16***92 | Duct As | 1 |
| 16***18 | Insulation; (Upper) | 1 |
| 16***19 | Insulation; (Upper) | 1 |
210-1338 Duct Gp-Cab Air
| 18***47 | Lighting Group-Flood; -Rear | 1 |
| 19***59 | Guard Group-Overhead | 1 |
| 19***77 | Lighting Group-Flood; -Guard, Front | 1 |
188-4938 Guard Ar-Overhead
| 18***38 | Guard Ar-Overhead | 1 |
| 19***53 | Guard As | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
194-3259 Guard Gp-Overhead
| 11***21 | Seal; (85-cm Each) | 0 |
| 19***59 | Guard Group-Overhead | 1 |
| 19***88 | Bracket | 1 |
188-4940 Guard Gp-Vandalism
| 11***24 | Spring As; (Gas) | 2 |
| 17***64 | Support As | 1 |
| 17***67 | Support As | 1 |
213-4640 Guard Gp-Window
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
| 19***52 | Bracket As | 1 |
193-7800 Headrest As-Seat
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 17***53 | Receptacle As; (2-Pin) | 1 |
186-0484 Horn Gp-Electric
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 13***27 | Converter As; (24-Volt) | 1 |
188-4943 Installation Gp-Radio
| 12***42 | Seal-O-Ring | 2 |
| 12***45 | Seal-O-Ring | 2 |
| 13***02 | Connector | 1 |
188-4974 Lines Gp-Air Conditioner -Extension
| 09***61 | Strap; (Cable) | 2 |
| 12***42 | Seal-O-Ring | 2 |
| 12***44 | Seal-O-Ring | 2 |
198-4687 Lines Gp-Air Conditioner
| 19***87 | Lines Group-Air Conditioner | 1 |
| 23***14 | Clamp-Spring | 4 |
| 3E***21 | Clip | 1 |
186-0496 Lines Gp-Heater
| 12***81 | Pipe | 2 |
| 18***96 | Lines Group-Heater | 1 |
| 3E***21 | Clip | 1 |
188-4965 Lines Gp-Heater -Extension
| 09***45 | Cable; (Lanyard) | 1 |
| 18***65 | Lines Group-Heater; -Extension | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
111-1857 Literature Gp
| 11***57 | Literature Group | 1 |
| 12***94 | Plug | 1 |
| 12***11 | Spacer; (3x15x17-mm Thk) | 1 |
196-9732 Mirror Gp -Rear View, Side View
| 19***32 | Mirror Group; -Rear View, Side View | 1 |
| 20***67 | Service Group-Monitor | 1 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
186-0494 Mirror Gp -Rear View, Side View
| 12***94 | Plug | 1 |
| 12***11 | Spacer; (3x15x17-mm Thk) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
187-3770 Monitor & Mtg Gp-Operator
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 13***39 | Nut; (U-Type Retainer) | 2 |
| 15***68 | Cover | 1 |
187-3801 Mounting Gp-Cab
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 18***96 | Lines Group-Heater | 1 |
| 18***80 | Platform Group-Operator | 1 |
198-4680 Operator Ar
| 09***16 | Ring-Retaining | 1 |
| 09***23 | Ring-Retaining; (External) | 2 |
| 11***45 | Retainer-Spring | 1 |
160-1501 Pedal Gp-Brake
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 11***90 | Ring | 1 |
| 12***28 | Pin As | 1 |
187-3780 Platform Gp-Operator
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 12***42 | Washer; (17x75x6-mm Thk) | 4 |
| 16***16 | Grommet | 1 |
196-7485 Radio Gp -Am/Fm
| 15***56 | Cover-Protection | 1 |
| 18***61 | Frame Group-Cab Riser | 1 |
| 18***62 | Lines Group-Pilot; -Operator, Extension | 1 |
188-4960 Riser Ar-Cab -Fixed
| 18***60 | Riser Ar-Cab; -Fixed | 1 |
| 22***56 | Support | 1 |
| 22***57 | Support | 1 |
184-7621 Screen Gp-Sun
| 18***21 | Screen Group-Sun | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
205-6214 Seat Belt Gp
| 20***10 | Cushion As-Backrest, Name-Plate (Type Of Machine) | 1 |
| 20***11 | Suspension Group-Seat | 1 |
| 20***12 | Cushion As-Seat | 1 |
8y-4031 Seat Belt Gp -Adjustable, 3-In
| 8Y***31 | Seat Belt Group | 2 |
187-3781 Seat Gp
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 18***81 | Seat Group | 2 |
| 20***10 | Seat Belt Group; -Retractable, 2-In | 1 |
187-3785 Seat Gp
| 18***85 | Seat Group | 1 |
| 19***00 | Seat Group-Suspension | 1 |
190-0288 Seat Gp-Suspension
| 19***88 | Seat Group-Suspension | 1 |
| 20***13 | Suspension Group-Seat; -Air | 1 |
| 20***30 | Bearing | 1 |
195-7700 Seat Gp-Suspension
| 19***00 | Seat Group-Suspension | 1 |
| 26***96 | Service Group-Monitor | 1 |
| 31***37 | Software Group-Monitor | 1 |
205-3967 Service Gp-Monitor
| 20***67 | Service Group-Monitor | 1 |
| 24***58 | Control Group-Monitor | 1 |
262-6996 Service Gp-Monitor
| 18***79 | Support As-Seat | 1 |
| 26***96 | Service Group-Monitor | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
187-3791 Support Gp-Seat
| 18***91 | Support Group-Seat | 1 |
| 20***11 | Kit-Plate; (Suspension Seat) | 1 |
| 20***13 | Plate-Upper | 1 |
202-7213 Suspension Gp-Seat
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 14***18 | Nut; (M6x1-Thd) | 4 |
| 16***95 | Visor | 1 |
202-7211 Suspension Gp-Seat
| 20***11 | Suspension Group-Seat | 1 |
| 20***12 | Kit-Adjuster; (Suspension Seat)(Seat Suspension) | 1 |
| 20***29 | Stop-Adjuster | 1 |
189-6117 Visor Gp-Cab
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 18 |
| 16***65 | Glass; (Upper Front) | 1 |
201-8760 Window Gp-Cab -Sides, Top, Back
| 09***61 | Strap; (Cable) | 1 |
| 14***50 | Ring-Pull | 1 |
| 16***67 | Glass; (Top) | 1 |
189-2053 Window Gp-Cab -Front Window, 50/50-Split
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 13***14 | Hammer Group | 1 |
| 15***89 | Glass; (Rh) | 1 |
219-8495 Window Gp-Cab -Front Window, 1-Piece
| 14***03 | Kit-Catch; (Window) | 1 |
| 21***34 | Kit-Seal; (Window) | 1 |
| 21***35 | Kit-Window; (Front) | 1 |
184-7619 Window Gp-Cab -Front Window, 50/50-Split
| 10***86 | Bolt-Socket Head; (M6x1x50-mm) | 4 |
| 13***74 | Bolt-Socket Head; (M5x0.8x20-mm) | 8 |
| 16***60 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
167-4060 Window Gp-Cab -Front Window, 50/50-Split
| 16***60 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***53 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***54 | Switch As; (Cab Window Limit) | 1 |
201-8765 Window Gp-Cab -Sides, Top, Back
| 16***64 | Glass; (Front) | 1 |
| 16***83 | Bracket | 6 |
| 16***84 | Clip | 1 |
151-6792 Window Gp-Door
| 14***03 | Kit-Catch; (Window) | 1 |
| 15***92 | Window Group-Door; (Door) | 1 |
| 20***46 | Kit-Window; (Polycarbonate)(Cab Door, Front) | 1 |
205-0442 Window Gp-Door -Lexan Polycarbonate
| 12***27 | Hose; (100-cm) | 0 |
| 19***99 | Plate As | 1 |
| 19***90 | Motor As | 1 |
190-0290 Wiper Gp-Window -Front Window, 50/50-Split
| 12***27 | Hose; (100-cm) | 2 |
| 19***90 | Wiper Group-Window; -Front Window, 50/50-Split | 1 |
| 19***99 | Plate As | 1 |
205-0460 Wiper Gp-Window -Front Window, 1-Piece
| 16***23 | Film; (Universal, Read Omm) | 1 |
| 20***60 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 20***59 | Film-Identification; (Pressure Tap) | 1 |
Power Train
111-1883 Axle & Mtg Ar-Front
| 11***70 | Pin | 1 |
| 11***30 | Plate As | 2 |
| 11***83 | Axle & Mtg Ar-Front | 1 |
118-1879 Axle & Mtg Ar-Front
| 11***39 | Axle Rear Axle | 1 |
| 11***79 | Axle & Mtg Ar-Front | 1 |
| 17***61 | Transmission Group | 1 |
175-6560 Axle & Transmission Ar
| 12***72 | Axle Rear Axle | 1 |
| 17***60 | Axle & Transmission Ar | 1 |
| 17***61 | Transmission Group | 1 |
175-6562 Axle & Transmission Ar -Wide Axle
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
175-6559 Axle & Transmission Ar
| 12***74 | Axle Rear Axle | 1 |
| 17***59 | Axle & Transmission Ar | 1 |
| 17***61 | Transmission Group | 1 |
112-4533 Axle Ar-Front
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
121-4435 Axle Ar-Front
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
194-9207 Axle Ar-Rear
| 11***79 | Axle & Mtg Ar-Front | 1 |
| 18***35 | Axle Rear Axle | 1 |
| 19***07 | Axle Rear Axle | 1 |
129-2674 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
188-4935 Axle Ar-Rear
| 12***24 | Cap | 2 |
| 12***15 | Fitting As; (Quick Disconnect) | 2 |
| 17***59 | Axle & Transmission Ar | 1 |
188-4933 Axle Ar-Rear -Drum Brake, Wide
| 12***24 | Cap | 2 |
| 12***15 | Fitting As; (Quick Disconnect) | 2 |
| 13***18 | Fitting Group-Tube | 2 |
129-2672 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
188-4934 Axle Ar-Rear
| 12***24 | Cap | 2 |
| 12***15 | Fitting As; (Quick Disconnect) | 2 |
| 13***18 | Fitting Group-Tube | 2 |
112-5439 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
250-2704 Axle Ar-Wide
| 12***50 | Shoe-Brake | 2 |
| 12***51 | Bolt | 2 |
| 12***52 | Plate | 1 |
158-6333 Brake Gp-Drum
| 11***83 | Axle & Mtg Ar-Front | 1 |
| 11***66 | Tire & Rim Ar | 1 |
| 15***33 | Brake Group-Drum | 1 |
186-0478 Power Train Ar
| 18***78 | Power Train Ar | 1 |
| 32***49 | Ring-Tire | 4 |
8u-6723 Ring Gp-Tire
| 8U***23 | Ring Group-Tire | 1 |
| 8U***24 | Ring-Tire | 4 |
8u-6725 Ring Gp-Tire
| 5W***13 | Housing-Parking Brake | 1 |
| 5W***16 | Shaft | 1 |
| 5W***18 | Flange | 2 |
110-6135 Shaft Gp-Drive -Carrier Bearing
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 23***63 | Housing-Brake | 1 |
| 5W***16 | Shaft | 1 |
194-9211 Shaft Gp-Drive
| 11***07 | Tire & Rim Group | 8 |
| 19***11 | Shaft Group-Drive | 1 |
| 22***74 | Extension As-Air | 4 |
262-6190 Tire & Rim Ar
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
| 21***56 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
113-1866 Tire & Rim Ar
| 11***66 | Tire & Rim Ar | 1 |
| 12***10 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
125-9674 Tire & Rim Ar
| 12***74 | Tire & Rim Ar | 1 |
| 14***88 | Tire & Rim Group | 4 |
265-9250 Tire & Rim Ar
| 22***75 | Rim As | 1 |
| 26***50 | Tire & Rim Ar | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
224-3190 Tire & Rim Ar
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
| 12***02 | Ring-Guide | 2 |
| 13***27 | Flange-Stop | 2 |
111-2003 Tire & Rim Ar
| 11***03 | Tire & Rim Ar | 1 |
| 11***04 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-1999 Tire & Rim Ar
| 11***99 | Tire & Rim Ar | 1 |
| 11***09 | Tire & Rim Group | 4 |
227-4203 Tire & Rim Ar
| 22***74 | Extension As-Air | 4 |
| 22***03 | Tire & Rim Ar | 1 |
| 26***91 | Tire & Rim Group | 8 |
123-3879 Tire & Rim Ar
| 12***79 | Tire & Rim Ar | 1 |
| 12***72 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-2001 Tire & Rim Ar
| 11***01 | Tire & Rim Ar | 1 |
| 11***11 | Tire & Rim Group | 8 |
125-9671 Tire & Rim Ar
| 12***71 | Tire & Rim Ar | 1 |
| 12***75 | Tire & Rim Group | 8 |
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
144-0685 Tire & Rim Ar
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
| 12***02 | Ring-Guide | 2 |
| 13***27 | Flange-Stop | 2 |
262-6195 Tire & Rim Ar
| 22***74 | Extension As-Air | 4 |
| 26***95 | Tire & Rim Ar | 1 |
| 26***51 | Tire & Rim Group | 8 |
150-7806 Tire & Rim Ar
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
| 12***02 | Ring-Guide | 2 |
| 15***06 | Tire & Rim Ar | 1 |
111-2007 Tire & Rim Gp
| 11***07 | Tire & Rim Group | 1 |
| 15***62 | Rim As-Wheel | 1 |
| 5W***36 | Tire-18r-19,5 Xf | 1 |
111-2004 Tire & Rim Gp
| 11***04 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2009 Tire & Rim Gp
| 11***09 | Tire & Rim Group | 1 |
| 24***71 | Rim As | 1 |
| 5W***52 | Tire-Solid; (10-20) | 1 |
262-6191 Tire & Rim Gp
| 22***75 | Rim As | 1 |
| 26***91 | Tire & Rim Group | 1 |
| 26***52 | Tire; (10-20) | 1 |
265-9251 Tire & Rim Gp
| 09***19 | Ring-Retaining | 1 |
| 09***34 | Ring-Retaining; (Internal) | 1 |
| 09***42 | Ring-Retaining | 1 |
144-0688 Tire & Rim Gp
| 14***88 | Tire & Rim Group | 1 |
| 15***07 | Tire; (11-20) | 1 |
| 5W***37 | Rim As-Wheel | 1 |
124-2910 Tire & Rim Gp
| 12***10 | Tire & Rim Group | 1 |
| 12***56 | Tire; (10-20) | 1 |
| 22***75 | Rim As | 1 |
111-2011 Tire & Rim Gp
| 11***11 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
150-7808 Tire & Rim Gp
| 15***08 | Tire & Rim Group | 1 |
| 21***53 | Tire; (10-20) | 1 |
| 22***75 | Rim As | 1 |
224-6473 Tire & Rim Gp
| 22***73 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 26***92 | Tire; (10-20) | 1 |
125-9672 Tire & Rim Gp
| 12***72 | Tire & Rim Group | 1 |
| 12***55 | Tire; (11-20) | 1 |
| 5W***37 | Rim As-Wheel | 1 |
125-9675 Tire & Rim Gp
| 12***75 | Tire & Rim Group | 1 |
| 14***69 | Rim As-Wheel | 1 |
| 14***89 | Tire; (600/40-22.5) | 1 |
219-9856 Tire & Rim Gp
| 21***56 | Tire & Rim Group | 1 |
| 22***79 | Tire; (11.00-20) | 1 |
| 22***80 | Rim As-Wheel | 1 |
175-6561 Transmission Gp
| 09***19 | Ring-Retaining | 1 |
| 09***34 | Ring-Retaining; (Internal) | 1 |
| 09***42 | Ring-Retaining | 1 |
194-9216 Universal Joint Gp
| 19***16 | Universal Joint Group | 1 |
| 26***64 | Wedge | 1 |
| 26***70 | Bracket | 1 |
134-1376 Universal Joint Gp
| 13***76 | Universal Joint Group | 1 |
| 19***28 | Spider & Bearing As | 2 |
| 5W***58 | Fitting-Grease | 1 |
121-7657 Universal Joint Gp
| 12***57 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
116-5478 Wedge Gp-Wheel
| 11***37 | Washer; (31x68x10-mm Thk) | 3 |
| 11***78 | Wedge Group-Wheel | 1 |
| 13***15 | Ring | 3 |
Service Equipment And Supplies
252-9370 Plate & Film Gp -Czech
| 25***79 | Film-Warning; (Engine Speed Control) | 1 |
| 25***85 | Film-Notice; (Oscillating Axle) | 1 |
| 25***90 | Film-Warning; (Direction Control) | 1 |
188-4985 Plate & Film Gp -Norwegian
| 16***28 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***85 | Plate & Film Group; -Norwegian | 1 |
| 20***36 | Film-Identification; (Pressure Tap) | 1 |
188-4987 Plate & Film Gp -Spanish
| 10***63 | Film-Warning; (Engine Speed Control) | 1 |
| 11***55 | Film-Identification; (Environmental Configuration)(German Only) | 2 |
| 18***87 | Plate & Film Group; -Spanish | 1 |
198-0859 Plate & Film Gp -Russian
| 18***02 | Film-Warning; (Engine Speed Control) | 1 |
| 18***03 | Film-Notice; (Oscillating Axle) | 1 |
| 18***04 | Film-Warning; (Boom Over Rear Axle) | 1 |
188-4983 Plate & Film Gp -Greek
| 16***27 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***83 | Plate & Film Group; -Greek | 1 |
| 20***34 | Film-Identification; (Pressure Tap) | 1 |
227-2946 Plate & Film Gp -Italian
| 22***46 | Plate & Film Group; -Italian | 1 |
| 25***13 | Film-Warning; (Engine Speed Control) | 1 |
| 25***17 | Film-Notice; (Oscillating Axle) | 1 |
188-4988 Plate & Film Gp -Swedish
| 09***61 | Strap; (Cable) | 1 |
| 11***65 | Plate-Instruction; (Air Conditioner)(A/C) | 1 |
| 11***42 | Film-Warning; (Battery/Jump Start) | 1 |
198-0860 Plate & Film Gp -Turkish
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 12***31 | Plate As | 1 |
252-9376 Plate & Film Gp -Slovakian
| 25***82 | Film-Warning; (Engine Speed Control) | 1 |
| 25***88 | Film-Notice; (Oscillating Axle) | 1 |
| 25***94 | Film-Warning; (Direction Control) | 1 |
252-9373 Plate & Film Gp -Latvian
| 25***80 | Film-Warning; (Engine Speed Control) | 1 |
| 25***86 | Film-Notice; (Oscillating Axle) | 1 |
| 25***92 | Film-Warning; (Direction Control) | 1 |
188-4982 Plate & Film Gp -German
| 16***30 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***82 | Plate & Film Group; -German | 1 |
| 20***33 | Film-Identification; (Pressure Tap) | 1 |
252-9371 Plate & Film Gp -Estonian
| 25***14 | Film-Warning; (Engine Speed Control) | 1 |
| 25***19 | Film-Notice; (Oscillating Axle) | 1 |
| 25***22 | Film-Warning; (Direction Control) | 1 |
252-9374 Plate & Film Gp -Lithuanian
| 25***16 | Film-Warning; (Engine Speed Control) | 1 |
| 25***20 | Film-Notice; (Oscillating Axle) | 1 |
| 25***23 | Film-Warning; (Direction Control) | 1 |
190-0295 Plate & Film Gp
| 11***81 | Film-Warning; (Engine Speed Control) | 1 |
| 12***39 | Film-Notice; (Boom, Stick Removal) | 1 |
| 12***45 | Film-Warning; (Boom Over Rear Axle) | 1 |
252-9372 Plate & Film Gp -Hungarian
| 25***81 | Film-Warning; (Engine Speed Control) | 1 |
| 25***87 | Film-Notice; (Oscillating Axle) | 1 |
| 25***93 | Film-Warning; (Direction Control) | 1 |
188-4977 Plate & Film Gp -English
| 10***48 | Film-Warning; (Engine Speed Control) | 1 |
| 12***96 | Film-Warning; (Direction Control)(Boom Over Rear Axle) | 1 |
| 12***98 | Film-Notice; (Oscillating Axle) | 1 |
188-4979 Plate & Film Gp -Danish
| 16***29 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***79 | Plate & Film Group; -Danish | 1 |
| 20***29 | Film-Identification; (Pressure Tap) | 1 |
188-4978 Plate & Film Gp -Finnish
| 16***31 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***78 | Plate & Film Group; -Finnish | 1 |
| 20***28 | Film-Identification; (Pressure Tap) | 1 |
188-4980 Plate & Film Gp -Dutch
| 16***24 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***80 | Plate & Film Group; -Dutch | 1 |
| 20***31 | Film-Identification; (Pressure Tap) | 1 |
252-9377 Plate & Film Gp -Slovenian
| 25***77 | Plate & Film Group; -Slovenian | 1 |
188-4984 Plate & Film Gp -Italian
| 10***47 | Film-Warning; (Engine Speed Control) | 1 |
| 12***31 | Film-Warning; (Direction Control)(Boom Over Rear Axle) | 1 |
| 12***34 | Film-Notice; (Oscillating Axle) | 1 |
252-9375 Plate & Film Gp -Polish
| 25***84 | Film-Warning; (Engine Speed Control) | 1 |
| 25***89 | Film-Notice; (Oscillating Axle) | 1 |
| 25***95 | Film-Warning; (Direction Control) | 1 |
188-4981 Plate & Film Gp -French
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 11***60 | Film-Warning; (Engine)(German) | 1 |
| 11***55 | Film-Identification; (Environmental Configuration)(German Only) | 2 |
188-4986 Plate & Film Gp -Portuguese
| 16***25 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***86 | Plate & Film Group; -Portuguese | 1 |
| 20***38 | Film; (Pressure Tap) | 1 |
Undercarriage
186-0469 Frame Ar-Undercarriage
| 18***69 | Frame Ar-Undercarriage | 1 |
| 19***12 | Step Group-Tool Box | 1 |
| 19***13 | Step Group | 1 |
249-8060 Frame Ar-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 18***99 | Frame As-Undercarriage | 1 |
248-4750 Frame Gp-Undercarriage
| 24***50 | Frame Group-Undercarriage | 1 |
228-3840 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 22***40 | Frame Group-Undercarriage | 1 |
188-5000 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 18***00 | Frame Group-Undercarriage | 1 |
Work Tools
106-6757 Adjuster Gp-Bucket
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 10***68 | Bracket As | 2 |
257-0196 Blade & Mounting Gp
| 18***37 | Lines Group-Blade Cylinder | 1 |
| 19***87 | Blade & Mounting Group | 1 |
| 22***45 | Cylinder Group-Blade | 2 |
118-1865 Blade & Mounting Gp
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 10***92 | Bracket As | 1 |
| 10***47 | Linkage As | 1 |
190-0287 Blade & Mounting Gp
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
| 10***92 | Bracket As | 1 |
188-4997 Blade Ar
| 11***65 | Blade & Mounting Group | 1 |
| 18***97 | Blade Ar | 1 |
| 18***37 | Lines Group-Blade Cylinder | 1 |
188-4998 Blade Ar
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 18***98 | Blade Ar | 1 |
226-8997 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***64 | Edge As | 1 |
| 22***72 | Plate-Wear | 6 |
226-8994 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***66 | Edge As | 1 |
| 22***71 | Plate-Wear | 6 |
226-9000 Bucket & Adjuster Gp -Extreme Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***65 | Edge As | 1 |
| 22***73 | Plate-Wear | 6 |
128-5804 Bucket & Adjuster Gp -Ditch Cleaning
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***04 | Bucket & Adjuster Group; -Ditch Cleaning | 1 |
251-3847 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
226-8965 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***60 | Edge As | 1 |
| 22***96 | Plate; (Wear) | 1 |
251-3845 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
226-8988 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***64 | Edge As | 1 |
| 22***69 | Plate-Wear | 6 |
251-3846 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
122-6997 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 12***97 | Bucket & Adjuster Group | 1 |
251-3849 Bucket & Adjuster Gp -Extreme Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
226-8991 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***65 | Edge As | 1 |
| 22***70 | Plate-Wear | 6 |
251-3842 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
122-6995 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***35 | Bucket As-Excavation | 1 |
| 12***95 | Bucket & Adjuster Group | 1 |
226-8983 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***63 | Edge As | 1 |
| 22***68 | Plate-Wear | 6 |
122-6998 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***98 | Bucket & Adjuster Group | 1 |
| 12***26 | Bucket As-Ditch Cleaning | 1 |
251-3848 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
226-9003 Bucket & Adjuster Gp -Extreme Service
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
251-3850 Bucket & Adjuster Gp -Extreme Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
226-8980 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***62 | Edge As | 1 |
| 22***08 | Plate, Flange; Oval Flange, Flange | 1 |
252-5477 Bucket & Adjuster Gp -Excavation
| 12***53 | Bucket As-Ditch Cleaning | 1 |
| 25***77 | Bucket & Adjuster Group; -Excavation | 1 |
| 5W***09 | Bearing | 2 |
251-3844 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
226-8976 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***61 | Edge As | 1 |
| 22***02 | Plate | 1 |
251-3843 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
116-6011 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 2 |
121-5557 Bucket As-Ditch Cleaning
| 12***57 | Bucket As-Ditch Cleaning | 2 |
| 12***66 | Reinforcement | 2 |
| 12***29 | Section | 2 |
127-8026 Bucket As-Ditch Cleaning
| 12***26 | Bucket As-Ditch Cleaning | 1 |
| 13***16 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 4 |
121-5554 Bucket As-Ditch Cleaning
| 11***22 | Plate-Wear | 6 |
| 12***54 | Bucket As-Ditch Cleaning | 1 |
| 12***85 | Edge-Cutting | 1 |
121-5553 Bucket As-Ditch Cleaning
| 12***53 | Bucket As-Ditch Cleaning | 1 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
120-4435 Bucket As-Excavation
| 12***35 | Bucket As-Excavation | 1 |
| 12***50 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 5 |
122-2236 Bucket As-Excavation
| 12***36 | Bucket As-Excavation | 1 |
| 22***66 | Edge As | 1 |
| 22***71 | Plate-Wear | 6 |
226-8998 Bucket As-Excavation -Wide Quick Coupler
| 22***59 | Edge As | 1 |
| 22***98 | Bucket As-Excavation; -Wide Quick Coupler | 1 |
| 23***78 | Plate-Wear | 6 |
120-4436 Bucket As-Excavation
| 12***36 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 3 |
5w-0604 Bucket & Bearing As -Ditch Cleaning
| 12***54 | Bucket As-Ditch Cleaning | 1 |
| 5W***04 | Bucket As.-Ditch Clng; -Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
5w-0605 Bucket & Bearing As -Ditch Cleaning
| 11***22 | Plate-Wear | 6 |
| 5W***05 | Bucket As.-Ditch Clng; -Ditch Cleaning | 1 |
| 5W***55 | Edge-Cutting | 1 |
226-8981 Bucket Gp-Excavation
| 22***61 | Edge As | 1 |
| 22***02 | Plate | 1 |
| 22***03 | Plate | 1 |
252-5478 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8995 Bucket Gp-Excavation
| 22***65 | Edge As | 1 |
| 22***70 | Plate-Wear | 6 |
| 22***95 | Bucket Group-Excavation; -Quick Coupler | 1 |
251-3939 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8989 Bucket Gp-Excavation
| 22***63 | Edge As | 1 |
| 22***68 | Plate-Wear | 6 |
| 22***89 | Bucket Group-Excavation; -Quick Coupler | 1 |
252-5479 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8985 Bucket Gp-Excavation
| 22***62 | Edge As | 1 |
| 22***08 | Plate, Flange; Oval Flange, Flange | 1 |
| 22***09 | Flange, Flange; Oval Flange, Plate | 1 |
251-3942 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3988 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3943 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8990 Bucket Gp-Excavation -Narrow Quick Coupler
| 22***64 | Edge As | 1 |
| 22***69 | Plate-Wear | 6 |
| 22***90 | Bucket Group-Excavation; -Narrow Quick Coupler | 1 |
251-3987 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3941 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8975 Bucket Gp-Excavation -Narrow Quick Coupler
| 22***61 | Edge As | 1 |
| 22***02 | Plate | 1 |
| 22***03 | Plate | 1 |
226-8992 Bucket Gp-Excavation
| 22***64 | Edge As | 1 |
| 22***69 | Plate-Wear | 6 |
| 22***92 | Bucket Group-Excavation; -Quick Coupler | 1 |
251-3984 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3986 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8999 Bucket Gp-Excavation -Narrow Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
252-5476 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-8993 Bucket Gp-Excavation -Narrow Quick Coupler
| 22***65 | Edge As | 1 |
| 22***70 | Plate-Wear | 6 |
| 22***93 | Bucket Group-Excavation; -Narrow Quick Coupler | 1 |
226-8982 Bucket Gp-Excavation
| 22***62 | Edge As | 1 |
| 22***08 | Plate, Flange; Oval Flange, Flange | 1 |
| 22***09 | Flange, Flange; Oval Flange, Plate | 1 |
251-3990 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3985 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3940 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3989 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
252-5480 Bucket Gp-Excavation -Quick Coupler
| 22***64 | Edge As | 1 |
| 22***72 | Plate-Wear | 6 |
| 25***80 | Bucket Group-Excavation; -Quick Coupler | 1 |
226-8986 Bucket Gp-Excavation
| 22***63 | Edge As | 1 |
| 22***68 | Plate-Wear | 6 |
| 22***86 | Bucket Group-Excavation; -Quick Coupler | 1 |
226-8996 Bucket Gp-Excavation -Wide Quick Coupler
| 22***66 | Edge As | 1 |
| 22***71 | Plate-Wear | 6 |
| 22***96 | Bucket Group-Excavation; -Wide Quick Coupler | 1 |
251-3938 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
226-9005 Bucket Gp-Extreme Excavation -Narrow Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3991 Bucket Gp-Extreme Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3992 Bucket Gp-Extreme Excavation -Quick Coupler
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
226-9001 Bucket Gp-Extreme Excavation
| 22***64 | Edge As | 1 |
| 22***69 | Plate-Wear | 6 |
| 22***01 | Bucket Group-Extreme Excavation; -Quick Coupler | 1 |
226-9002 Bucket Gp-Extreme Excavation -Narrow Quick Coupler
| 22***65 | Edge As | 1 |
| 22***73 | Plate-Wear | 6 |
| 22***02 | Bucket Group-Extreme Excavation; -Narrow Quick Coupler | 1 |
226-9004 Bucket Gp-Extreme Excavation
| 22***65 | Edge As | 1 |
| 22***73 | Plate-Wear | 6 |
| 22***04 | Bucket Group-Extreme Excavation; -Quick Coupler | 1 |
251-3945 Bucket Gp-Extreme Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3944 Bucket Gp-Extreme Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
174-2496 Coupler Ar-Quick
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
174-5654 Coupler Ar-Quick -Mechanical
| 17***70 | Kit-Latch; (Quick Coupler) | 1 |
| 17***54 | Coupler Ar-Quick; -Mechanical | 1 |
174-2523 Coupler Ar-Quick -Mechanical
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
174-2522 Coupler Ar-Quick
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
173-9956 Hook Gp-Lifting
| 09***03 | Bolt-Socket Head; (M16x2x75-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***40 | Wedge | 1 |
171-3689 Lock Gp-Quick Coupler -Mechanical
| 09***48 | Nipple, Grease | 2 |
| 09***93 | Clamp-Hose | 1 |
| 09***85 | Clamp; (Hose) | 1 |
169-0701 Lock Gp-Quick Coupler -Hydraulic
| 09***48 | Nipple, Grease | 2 |
| 09***93 | Clamp-Hose | 1 |
| 09***85 | Clamp; (Hose) | 1 |
169-0327 Lock Gp-Quick Coupler -Hydraulic
| 09***03 | Bolt-Socket Head; (M16x2x75-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 09***69 | Bolt | 2 |
171-3690 Lock Gp-Quick Coupler -Mechanical
| 17***90 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 22***81 | Tip-Extra-Duty; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
3g-3237 Tip Gp-Penetration
| 22***82 | Tip-Penetration; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 3G***37 | Tip Group; -J-300 | 1 |
229-6964 Tip Gp-Extra-Duty -K-80
| 22***89 | Tip-General Purpose; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***64 | Tip Group-Extra-Duty; -K-80 | 1 |
229-6969 Tip Gp-General Purpose -K-80
| 10***08 | Pin-G.E.T. | 1 |
| 22***69 | Tip Group-General Purpose; -K-80 | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3751 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***51 | Tip Group-Long; -J-300, Heavy-Duty | 1 |
9j-3167 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
| 9J***67 | Tip Group-Long; -J-300 | 1 |
229-6965 Tip Gp-Penetration -K-80
| 22***83 | Tip-Bucket; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***65 | Tip Group-Penetration; -K-80 | 1 |
229-6966 Tip Gp-Penetration Plus -K-80
| 10***08 | Pin-G.E.T. | 1 |
| 1U***01 | Tip ( Short ) | 1 |
| 22***66 | Tip Group-Penetration Plus; -K-80 | 1 |
9j-3175 Tip Gp-Short
| 16***83 | Sensor As; (Sunlight For Air Conditioner) | 1 |
| 19***86 | Air Conditioner Group | 1 |
| 19***90 | Panel-Control | 1 |
M316C serial number reference
The PIN plate on the M316C wheeled excavator is riveted to the mainframe near the base of the cab, usually on the right-hand side close to the cab step/door, with the serial often cross-stamped into the frame structure nearby. The plate carries the full serial: the first three characters are the letter/number prefix that identifies the model and configuration block (for example BDX or H2C), and the digits that follow are the sequential machine number within that block. Always read the full stamped string off the plate rather than a worn or repainted-over section, since the prefix - not the trailing digits - is what determines which parts/service manual configuration applies.
| Prefix | Identifies | Notes |
|---|---|---|
| BDX | M316C wheeled excavator | Serial range BDX02001 and up. Cat 3056E DIT ATAAC engine, turbocharged with air-to-air aftercooling, rated about 103 kW (138 hp) net at 2000 rpm (exact emissions tier not confirmed for this model). BDX-prefix units are generally dated around 2004-2005 model years. One documented unit in this prefix carries a variable-angle monoboom (about 2.6 m / 8 ft 6 in) with front and rear outriggers and dual tires, but that boom/outrigger pairing is not confirmed across the whole prefix range - confirm exact boom/undercarriage configuration with your dealer using the full PIN. |
| H2C | M316C wheeled excavator | Serial range H2C00001 and up. Same platform and Cat 3056E DIT ATAAC engine as the BDX-prefix machines, about 103 kW (138 hp) net. H2C-prefix units are generally dated around the 2005 model year. Exact date/serial break between the BDX and H2C prefix blocks is not documented in public sources - treat them as separate factory configuration blocks on the same model rather than a strict chronological split. |
Frequently asked questions
What engine does the Caterpillar M316C use?
The M316C uses the Caterpillar 3056E DIT ATAAC inline six-cylinder diesel, rated at 103 kW (138 hp) net at 2000 rpm. This is a different engine generation from the later M316D's C6.6, so parts and service specs should not be cross-applied between the two.
What is the M316C's operating weight?
Operating weight runs about 16.3 to 18.2 metric tons (35,900 to 40,100 lb), varying by boom and stick length, outrigger setup, and counterweight. Treat published single-figure weights as configuration-dependent.
What replaced the Caterpillar M316C?
The M316D (roughly 2007 to 2015) replaced it, moving to a Cat C6.6 ACERT engine. The current M316 generation now runs a Cat C4.4 engine under later Tier 4 Final and Stage V emissions rules.
What M316C owners discuss
What's the most common cause of a Cat M316C cranking but not starting?
Points back to the 3056E's low-pressure fuel supply before the electronic injection pump gets blamed. A no-start with normal cranking usually traces to air entering the fuel circuit ahead of the pump: a worn lift-pump lid gasket, a filter-to-filter-head seal that's lost its seal, or a loose line fitting. If the engine needs re-bleeding or ether every morning even with fresh filters, that points to an air leak or a failing check valve, not necessarily the injection pump. Reading the fuel shutoff solenoid and pressure sensors in full needs a shop diagnostic tool, not just the cab monitor, before condemning the pump itself. Have your dealer verify the fuel-system diagnosis before an injection pump swap — replacing the pump without finding the air leak often leaves the hard-start unresolved.
Why do the joystick controls go completely dead (no lift, no swing) on these machines?
When every upper function dies at once but the main pump is clearly still making flow, the fault sits in the pilot circuit, not in an individual work section. Common causes are a stuck or failed pilot pressure-reducing solenoid on the pilot manifold in the pump compartment, a plugged pilot filter, or a weak pilot pump. Because pilot oil commands every spool in the main control valve, losing it kills lift, swing and travel commands together even though implement flow is available. Have your dealer verify pilot-circuit pressure with a gauge before replacing any single valve section.
What electrical gremlins show up most often on this C-series wheeled excavator platform?
Owners report monitor-panel dropouts, a cab riser that won't raise or lower, and intermittent dash faults. Caterpillar documents the electronic solenoid-valve wiring for the whole M313C-through-M322C wheeled excavator range together, so the same weak points recur across the family: moisture inside connectors, corroded grounds, and a tired alternator letting system voltage sag under load. A monitor that goes dark or behaves erratically points more often to an internal power-supply fault in the display than to the harness. Have your dealer verify grounds and connector condition before swapping a monitor or control module.
What wears out first on the axle and tire end, since this machine has no tracks?
In place of undercarriage wear, watch the oscillating front axle's pivot pins and bushings, the axle lock (engaged for digging stability, released for travel), and the tires. Tight-radius pivot turns on hard surfaces and curb strikes wear tire sidewalls faster than straight-line travel wears the tread, and uneven tire wear is more often an axle or toe problem than just tread age. Grease intervals on the oscillating axle matter more here than on a comparable tracked machine, since this axle carries steering and suspension load that a track frame doesn't. Have your dealer verify axle-lock engagement and pivot-pin play if the machine feels unstable while digging.
Is the M316C's engine shared with other Cat machines, and does that affect wear patterns?
Yes. The 3056E DIT ATAAC block used in the M316C is the same one used across its C-series wheeled-excavator siblings and several Cat wheel loaders and compactors of that era. Turbocharger and injector wear reported on the loader applications generally applies here too — dust ingestion shortens turbo life, and low-quality fuel is the most commonly cited cause of early injector wear. This is the older 3056E-powered C-series engine, not the C4.4 used in the current M316 lineup, so cold-start and emissions-system advice written for the newer engine does not carry over.
What causes the blade or lower-frame functions to act erratic while the upper structure (boom, stick, swing) works fine?
The upper deck still rotates on a slew bearing above the axle chassis, so hydraulic power to the blade cylinder and drive still has to cross a center swivel/rotary manifold at that joint. Worn seals there let oil bypass internally between ports with no external leak, and the telltale pattern is normal boom/stick/swing behavior paired with weak or erratic blade and travel response. Reworking the seals in that manifold resolves this far more often than replacing a travel motor outright. Have your dealer verify internal bypass at the manifold with a flow test before a travel motor is condemned.
What should I check before buying a used Cat M316C?
Start with the standard hydraulic-machine checklist: inspect the pump compartment and every cylinder for leaks, rock the upper structure to feel for play in the slew ring, and check weld points at the boom-to-stick and stick-to-bucket joints for cracks. Because it's a wheeled machine, add axle pivot-pin play, axle-lock function, and tire wear pattern to the list — uneven wear suggests an axle or alignment issue, not just age. Cycle every joystick function to rule out a dead pilot circuit, and test the cab riser and monitor panel, both known weak points on this platform. Ask for service records with particular attention to injection pump and fuel-system work, since that's the most commonly reported no-start failure path on this engine. Have your dealer pull the full stored fault history with the shop diagnostic tool before you buy — the cab monitor only shows a summary, so a clean-running machine can still be hiding fault history.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific M316C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.