Caterpillarexcavator
Caterpillar M315
Maintenance schedule, common problems & OEM parts breakdown
The Cat M315 is a wheeled excavator, not a tracked machine: it rides on a highway-capable axle undercarriage with all-wheel drive and a two-speed powershift transmission, then digs from a slewing upperstructure like any excavator. The current generation, introduced around 2021, is powered by a Cat C4.4 four-cylinder diesel rated at about 110 kW (148 hp) gross, meeting Tier 4 Final/EU Stage V emissions with DEF/SCR aftertreatment; markets outside Tier 4 territory instead get a lower-output Cat C3.6 version of the same chassis, around 90 kW (121 hp), built to Tier 3/Stage IIIA. Operating weight runs roughly 15.7 to 18.0 tonnes (34,600 to 39,700 lb) depending on undercarriage configuration (dozer blade only, blade plus outriggers, or front-and-rear outriggers), stick length (2.2 m or 2.5 m) and tire choice. It replaces the M315F, built roughly 2017 to 2021, and in markets that ran the M315D2 platform it supersedes that line as well; both trace back to the original lettered M315C/M315D generation. Cat offers it with a single 5.2 m variable-adjustable boom, two stick lengths, a parallel or radial dozer blade, multiple outrigger arrangements, and Deluxe or Premium cab trim.
Caterpillar has reused the bare 'M315' designation before, so the name alone is ambiguous: an unrelated 1990s/2000s-era wheeled excavator built around Caterpillar's 3054 DIT engine also carried the plain M315 name, and the lettered-suffix M315C and M315D machines are a separate, older generation with their own parts books. None of that vintage or lettered-suffix data belongs on the current bare-number M315 covered here. Within the current generation, Cat's stated gains over the M315F are real but incremental: about 5 percent lower fuel burn, roughly 10 percent more swing torque, and up to 10 percent lower maintenance cost, driven mainly by longer-life filtration and a service layout built for 100 percent ground-level daily checks. For the used and parts market, the M315 fills a narrower niche than crawler excavators: pipeline, utility and municipal contractors who need highway travel speed and axle-based stability instead of tracks. That smaller installed base means fewer used units in circulation, tighter supply on axle, powershift and steering-cylinder parts, and real risk of misapplied parts if a buyer confuses this generation with the M315D, M315D2 or M315F it succeeded.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar M315 specifications
Engine
| Engine model | Cat C4.4, 4-cylinder diesel, rated speed 2,200 rpm. |
| Gross power | 110 kW (148 hp) per ISO 14396:2002; 150 PS metric rating. |
| Net power | 108 kW (145 hp) per ISO 9249:2007; 147 PS metric rating. Net power is measured at the flywheel with fan, air cleaner, exhaust aftertreatment, and alternator installed, cooling fan at intermediate speed. |
| Displacement | 4.4 L (268.5 cu in); bore 105 mm (4.1 in) x stroke 127 mm (5.0 in). |
| Number of cylinders | 4. |
| Emissions tier | Meets U.S. EPA Tier 4 Final and EU Stage V standards. Runs on ULSD, blends up to B20 biodiesel, or up to 100% renewable diesel/HVO/GTL fuel (engines without aftertreatment can run higher biodiesel blends). |
Weights
| Operating weight (minimum) | 15 700 kg (34,610 lb), with full fuel tank, operator, GD bucket, and dual pneumatic tires. |
| Operating weight (maximum) | 18 000 kg (39,680 lb), depending on undercarriage, boom/stick, and counterweight configuration. |
| Typical configuration weights | Rear blade only, about 16 250 kg (35,820 lb); blade with outriggers, about 17 200 kg (37,920 lb); front and rear outriggers, about 17 450 kg (38,470 lb). Figures assume a 2.5 m (8'2") stick and 4000 kg (8,820 lb) counterweight; weight varies by configuration. |
| Ground pressure | Not applicable. This is a wheeled excavator running on dual or single pneumatic tires, not a tracked undercarriage, so ground-bearing pressure figures are not published for it. |
| Transport weight | Not separately published. The machine is road-driven on its own tires rather than trailer-hauled in a typical crawler-excavator sense, so shipping weight tracks the ordered operating-weight configuration. |
Dimensions
| Transport length | 8355 mm (27'5") with the 2.5 m stick, 8490 mm (27'10") with the 2.2 m stick, measured with 10.00-20 dual pneumatic tires. One factory summary sheet lists a shorter overall length near 7880 mm (25'10") for the same stick length, so treat the figure as varying by document/measurement basis. |
| Transport width | 2540 mm (8'4") with blade only or outriggers stowed, up to 3815 mm (12'6") with outriggers lowered to the ground. Upperframe width is 2480 mm (8'2"). |
| Transport height | 3280 mm (10'9") to the top of the cab with the falling-object guard fitted; 3060-3150 mm (10'0"-10'4") without the guard, depending on stick length. |
| Tail swing radius | 1750 mm (5'9"), the same for both available stick lengths. |
| Track shoe width | Not applicable. Undercarriage rides on tires rather than crawler tracks. Standard fitment is 10.00-20 dual pneumatic; optional 315/70R22.5 dual or 445/70R19.5 single tires are offered. |
| Ground clearance | 365 mm (14.4 in) at the axles; the lowest point at the access steps clears 440 mm (1'5"). |
| Undercarriage length | 4260 mm (14'0") with rear blade only, up to about 4970 mm (16'4") with front and rear outriggers or a radial blade fitted. Wheelbase is 2550 mm (8'4") across all configurations. |
Performance
| Max digging depth | 5290 mm (17'4") with the 2.2 m stick; 5580 mm (18'4") with the 2.5 m stick. |
| Max reach at ground line | 8680 mm (28'6") with the 2.2 m stick; 8980 mm (29'6") with the 2.5 m stick. |
| Max dump/loading height | 7400 mm (24'3") with the 2.2 m stick; 7680 mm (25'2") with the 2.5 m stick. |
| Max cutting height | 10 140 mm (33'3") with the 2.2 m stick; 10 410 mm (34'2") with the 2.5 m stick. |
| Swing speed | 9.1 rpm maximum, with 41.3 kN-m (30,461 lbf-ft) maximum swing torque. |
| Travel speed | 10 km/h (6.2 mph) in 1st gear, 35 km/h (21.7 mph) in 2nd gear. Creeper-speed range runs 5.5-15 km/h (3.4-9.3 mph). |
| Gradeability | 78% maximum, rated at a 16 500 kg (36,376 lb) gross machine weight. |
| Drawbar pull | 104 kN (23,380 lbf). |
Forces
| Bucket digging force | 106 kN (23,830 lbf) per ISO, the same figure for both stick lengths, measured with heavy-lift mode on and a pin-on GD bucket. |
| Stick digging force, 2.2 m stick | 71 kN (15,961 lbf) per ISO. |
| Stick digging force, 2.5 m stick | 65 kN (14,613 lbf) per ISO. The shorter stick gives more stick force; the longer stick trades some force for added reach and depth. |
Service capacities (summary)
| Fuel tank | 280 L (74.0 gal) total capacity. |
| Diesel exhaust fluid (DEF) tank | 20 L (5.3 gal). |
| Hydraulic system | Hydraulic tank holds 90 L (23.8 gal); total hydraulic system including tank holds 220 L (58.1 gal). |
| Engine oil | 13 L (3.4 gal). |
| Cooling system | 24 L (6.3 gal). |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
M315 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (oil, with filter) | 13 L (3.4 gal) | Cat DEO-ULS (API CJ-4) preferred for this Tier 4 Final/Stage V engine. SAE 10W-30 for -18°C to 40°C (0°F to 104°F); SAE 15W-40 for -10°C to 50°C (14°F to 122°F). Cat DEO-ULS SYN SAE 5W-40 spans a wider band, -30°C to 50°C (-22°F to 122°F). Cat DEO Cold Weather SAE 0W-40 for cold-soaked starts down to -40°C (-40°F). |
| Cooling system | 24 L (6.3 gal) | Cat Extended Life Coolant (ELC), factory-fill premix (ethylene glycol/water). Minimum 50% glycol is required on this Tier 4 Final/Stage V engine to guard against cavitation and boiling in the SCR-equipped cooling circuit. Freeze protection to about -37°C (-34°F), boil protection to roughly 106°C (223°F) pressurized. Cat DEAC conventional antifreeze/coolant is an acceptable alternative but needs periodic supplemental additive treatment. |
| Fuel tank | 280 L (74.0 gal) | Ultra-low sulfur diesel (ULSD, 15 ppm sulfur or less), minimum cetane 40. Fuel may be blended up to B20 biodiesel (FAME) or up to 100% renewable diesel/HVO/GTL; consult your dealer before running blends above B20 on this aftertreatment-equipped engine. |
| Diesel Exhaust Fluid (DEF) tank | 20 L (5.3 gal) | DEF meeting ISO 22241-1 (AdBlue-certified), 32.5% urea solution. Best stored between about -9°C and 25°C (16°F to 77°F); solution freezes near -11°C (11°F) and should be protected from prolonged heat above 35°C (95°F). |
| Hydraulic tank | 90-92 L (23.8-24.3 gal) - varies by build/configuration | Cat HYDO Advanced is the standard factory-fill family: SAE 10W for -20°C to 40°C (-4°F to 104°F); SAE 20W for -5°C to 45°C (23°F to 113°F); SAE 30 for 0°C to 50°C (32°F to 122°F). Cat BIO HYDO Advanced biodegradable ISO 46 multigrade, -30°C to 45°C (-22°F to 113°F), is offered as a factory option on this machine. |
| Hydraulic system total (including tank) | 220 L (58.1 gal) | Same Cat HYDO Advanced / Cat BIO HYDO Advanced fluid family as the hydraulic tank; implement, travel, swing, and steering circuits share the one system. |
| Final drive (each, wheel end) | 2.5 L (0.7 gal) | Cat TDTO (Transmission/Drive Train Oil) family per Cat's general final-drive guidance: SAE 10W for -20°C to 10°C (-4°F to 50°F); SAE 30 for 0°C to 50°C (32°F to 122°F); SAE 50 for 10°C to 50°C (50°F to 122°F). Cat TDTO-TMS multigrade covers a wider ambient band. Confirm the exact grade against this machine's own Operation and Maintenance Manual. |
| Swing mechanism | Not listed as a separate oil-fill compartment | Swing is driven by a dedicated hydraulic swing pump/motor that draws from the hydraulic system above, not a gear-oil-filled swing drive box. The swing bearing and pinion are grease-lubricated; an automatic lubrication system for implement and swing points is a factory option. Use Cat Extreme Application Grease (NLGI 1 or 2, calcium-sulfonate complex, moly-fortified), roughly -30°C to 50°C (-22°F to 122°F) depending on grade. |
| Rear axle housing (differential) | 14 L (3.7 gal) | Cat TDTO family, or Cat GO gear oil where an API GL-5 spec is called for: SAE 80W-90 for -20°C to 40°C (-4°F to 104°F); SAE 85W-140 for -10°C to 50°C (14°F to 122°F). Confirm exact fluid against the model's Operation and Maintenance Manual. |
| Front steering axle (differential) | 10.5 L (2.8 gal) | Same fluid family as the rear axle housing – Cat TDTO or Cat GO gear oil, chosen per ambient temperature as above. |
| Powershift transmission (range gearbox on the two-speed hydrostatic travel drive) | 2.5 L (0.7 gal) | Cat TDTO: SAE 10W for -20°C to 10°C (-4°F to 50°F); SAE 30 for 0°C to 50°C (32°F to 122°F); SAE 50 for 10°C to 50°C (50°F to 122°F). Cat TDTO-TMS multigrade for a wider ambient band. |
| Grease (spec only, no fixed fill capacity) | N/A - service item, not a reservoir | Cat Extreme Application Grease (NLGI 1 or 2, calcium-sulfonate complex base, moly-fortified) for the swing bearing, boom/stick/bucket linkage pins, and steering/axle pivots; roughly -30°C to 50°C (-22°F to 122°F) depending on grade. Cat Utility Grease (NLGI 2, lithium-complex) is an acceptable lighter-duty alternative for low-load pins. An automatic lubrication system for implement and swing points is available as a factory option. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar M315 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the M315 beyond the schedule
Predictive Maintenance & Fluid Analysis
Use the factory S.O.S ports on the engine, hydraulic tank and coolant circuit to track wear-metal trends before failures show up. The hydraulic filter restriction switch on the tank is a known weak point: an open-circuit fault can quietly lock the machine into eco mode, mimicking a power complaint that isn't one. Add axle, final-drive and powershift oil samples to the same schedule, and watch Product Link for SCR/DEF dosing faults before they trigger a derate.
Corrective & Common Repairs
Most repeat repairs trace to the wheeled undercarriage, not the excavator end. Worn steering-cylinder rod seals let hydraulic oil bypass internally, producing on-road wander or drift under power steering; reseal or replace the cylinder rather than chasing alignment. A hydraulic filter restriction switch that fails open forces eco mode and mimics a power loss; check the switch and wiring before condemning the pump. DEF lines and the tank cap vent crystallize if the machine sits idle; clear deposits before they block dosing.
Overhaul & Rebuild Points
At high hours, budget overhaul money for the driveline this machine adds atop a normal upperstructure rebuild. The swing bearing and pinion see combined digging and road-travel loads, so check backlash and raceway wear before it shows up as slew play. Powershift clutch packs and both axle differentials wear from mixed duty and deserve inspection at major rebuild. Oscillating front-axle pivot bushings and kingpins loosen over time and drive steering complaints. The C4.4's DEF/SCR aftertreatment adds injector and turbocharger checks that a pre-Tier 4 machine wouldn't need.
Seasonal & Environment Servicing
Factory cold-start capability covers down to -18C (0F); below that, use block heaters and let the hydraulic warm-up cycle finish before working the boom. DEF freezes near -11C (12F) and thaws slowly, so keep the tank topped up enough that a frozen dose doesn't strand the machine mid-shift. The standard cooling package handles up to 52C (125F) ambient, but clean radiator and aftercooler screens more often on dusty, hot-climate sites. Recheck tire pressure with seasonal swings, since outrigger and blade stability depends on correct inflation, not track ground pressure.
M315 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 138-3098 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 145-4086 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 8U-0723 | Filter Element-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
M315 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100 - FMI 1 | Engine oil pressure reading below the expected level for current engine speed. | Low oil level, worn oil pump, plugged oil filter, or a failed oil pressure sensor/wiring fault. | Shut the engine down safely, check oil level and filter condition, and check sensor wiring and connector before restart. |
| CID 110 - FMI 0 | Engine coolant temperature reading above the normal operating range. | Low coolant level, blocked radiator core, slipping or failed fan drive, or a stuck thermostat. | Idle down and check coolant level once safe, inspect radiator and fan drive, and check coolant temperature sensor reading against a manual gauge. |
| CID 111 - FMI 1 | Engine coolant level switch reads below the normal fill level. | Low coolant from a leak (hose, radiator, gasket) or a faulty level switch/float. | Inspect for external leaks, top up coolant to the correct level and mix ratio, then verify the switch clears the code. |
| CID 190 - FMI 8 | Engine speed/timing signal is abnormal or out of the expected frequency range. | Damaged speed/timing sensor, loose sensor air gap, or a chafed harness between the sensor and the engine ECM. | Check sensor mounting and air gap, inspect harness and connectors for damage, and confirm sensor resistance against spec before replacing. |
| CID 102 - FMI 1 | Turbo boost/intake manifold pressure reads lower than expected for the current engine load. | Restricted air filter, boost leak in charge-air piping, turbo wear, or a faulty boost pressure sensor. | Check air filter restriction and inspect charge-air piping and clamps for leaks before condemning the turbocharger or sensor. |
| CID 168 - FMI 1 | Machine system (battery/charging) voltage reads below the normal operating range. | Weak or sulfated battery, loose or corroded battery cables, or a failing alternator. | Load-test the battery, clean and tighten battery connections, and check alternator output before further diagnosis. |
| E954 | Aftertreatment diesel exhaust fluid (DEF) tank level has dropped to a low or empty condition. | DEF tank simply run dry, or a faulty DEF level sensor. | Refill with correct-spec DEF promptly; if the warning persists after a refill, check the DEF level sensor and wiring. |
| E1389 | SCR aftertreatment operator inducement event tied to a sustained emissions fault (commonly DEF quality, DEF level, or dosing issues left unresolved). | Contaminated or incorrect-concentration DEF, a biased NOx or DEF quality sensor, or an unresolved DEF system fault allowed to escalate. | Address the underlying DEF/SCR fault first (quality, level, dosing), then run the required inducement reset procedure with Cat diagnostic software. |
| SPN 3251 (Soot Loading High) | Diesel particulate filter soot load has reached a level requiring regeneration. | Extended light-duty/idle operation preventing passive regeneration, or a failed regeneration attempt. | Move to a safe area and allow a stationary regeneration to complete; if regeneration repeatedly fails, check the DPF differential pressure sensor and exhaust system. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
M315 attachments & work tools
Buckets
Standard general-duty bucket on the current M315 (Cat C4.4 engine, 110 kW ISO 14396) runs about 0.76 m³ (0.99 yd³) at roughly 1.1 m (43 in) width; other spec sheets list a smaller 0.63 m³ capacity, so confirm the exact stick length and counterweight package before ordering, capacity varies by configuration. Heavy-duty and rock buckets trade capacity for thicker wear plates and reinforced sidewalls on the same pin centers, with widths across this size class spanning roughly 450 mm to 1500 mm (18 in to 60 in) depending on digging versus grading duty. Buckets mount pin-on as standard and are compatible with a hydraulic pin-grabber coupler; bucket pin diameter typically runs in the 70 mm class for this weight bracket, but verify against the machine's actual linkage before buying a bucket.
Hydraulic hammers
The M315's digging-end output (106 kN bucket force, 71 kN stick force, 15.7-18.0 t operating weight) sits in the bracket Cat rates its H110-class hammer for, a class explicitly spanning carriers from roughly the 308 size up through 315. Expect a breaker in the 700-950 kg service-weight range, around 2,000 J impact energy, oil flow near 60-120 L/min and operating pressure around 14,500 kPa (2,100 psi); a silenced (S) version is offered where noise limits apply. Run the hammer off the dedicated one-way high-pressure circuit rather than the tilt/rotate line for correct cycling and hose life.
Quick couplers
Base configuration is pin-on; a Cat hydraulic pin-grabber coupler is the common upgrade, using a primary wedge plus a spring-loaded secondary latch so the tool stays locked if hydraulic pressure is lost. On this wheel-excavator platform a dedicated hydraulic circuit for the coupler is offered so the operator can swap a bucket, grapple, or hammer without leaving the cab. Coupler jaw spacing follows the machine's own bucket pin centers, so match coupler and bucket to the same pin class.
Thumbs/grapples
A hydraulic thumb paired with the standard bucket gives pick-and-load capability with an in-cab weight estimate, and an orange-peel/clamshell grapple with continuous rotation suits scrap and bulk-material handling. Both tools typically run on the machine's two-way medium-pressure auxiliary circuit that also drives tilt functions; a thumb on that shared medium-pressure line can cycle slowly, so a dedicated higher-flow circuit is worth specifying if the thumb sees heavy use.
Rippers
Rippers are not a heavily cataloged factory work tool for this wheel-excavator size class the way they are for dozers, but pin-on single-shank rippers built for the surrounding excavator weight brackets (reinforced one-piece shank, replaceable ground-engaging tip) are used to scarify rock or hardpan ahead of digging. The tool is purely mechanical, mounting to the stick in place of the bucket, and needs no dedicated hydraulic circuit; check boom/stick clearance and counterweight before fitting one to this machine.
Hydraulic-kit notes
Main pump on the M315 delivers around 275 L/min at up to 35,000 kPa (37,000 kPa in heavy-lift mode), giving headroom for auxiliary tools. The auxiliary valve stack on this M-series wheel-excavator platform can take added functions, allowing a two-way medium-pressure line for tilt/rotate tools alongside a one/two-way high-pressure line for a hammer or clamp-type attachment, plus the separate coupler circuit. Confirm which auxiliary lines are actually plumbed on a given unit before ordering a tool, since factory hydraulic kits are configurable per order.
All M315 assemblies by section
Every catalogued assembly group for the Caterpillar M315. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
127-8270 Aftercooler Gp-Water
| 10***14 | Stud | 1 |
| 10***15 | Bolt, Cover | 1 |
| 10***45 | Bolt; (M5x0.8x10-mm) | 2 |
117-7950 Air Cleaner Gp
| 10***55 | Hose (400 cm) | 0 |
| 11***50 | Air Cleaner Group | 1 |
| 12***78 | Seal | 1 |
122-8036 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 12***36 | Air Cleaner Group | 1 |
114-2378 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 11***78 | Manifold Group-Exhaust | 1 |
| 11***79 | Manifold-Exhaust | 1 |
253-4363 Muffler & Converter Gp
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***81 | Clamp As-Muffler | 2 |
| 11***23 | Pipe As-Exhaust | 1 |
117-7953 Muffler Gp
| 11***53 | Muffler Group | 1 |
127-2930 Turbocharger Gp
| 06***69 | Olive-Fuel Tube | 2 |
| 10***03 | Nut; (Spiralock M8-Thd) | 4 |
| 10***90 | Union | 1 |
127-2929 Turbocharger Gp
| 12***29 | Turbocharger Group | 1 |
| 13***73 | Ring | 1 |
| 13***74 | Seal-O-Ring | 1 |
Basic Engine
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 13***30 | Camshaft | 1 |
133-9361 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 12***43 | Cover As-Valve Mechanism | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
127-3325 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
127-3324 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 06***10 | Washer | 1 |
| 06***09 | Plug-Facing | 1 |
150-8683 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
123-3285 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
123-3286 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
130-1503 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
148-7147 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 11***76 | Pin | 1 |
| 14***47 | Adapter | 1 |
123-0863 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 11***76 | Pin | 1 |
| 12***63 | Drive Group-Accessory | 1 |
127-3296 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 11***30 | V-Belt Set; (Includes 2-Belts)(Fan Drive) | 1 |
100-6321 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***21 | Flywheel Group | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
101-3613 Housing Gp-Flywheel
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
| 10***17 | Plug | 3 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
123-2897 Lifting Gp-Engine
| 11***59 | Bolt; (M10x1.5x35-mm) | 2 |
| 12***97 | Lifting Group-Engine | 1 |
| 12***98 | Plate | 2 |
121-2626 Mounting Gp-Engine
| 11***07 | Mount As-Engine | 1 |
| 11***08 | Mount As-Engine | 1 |
| 12***26 | Mounting Group-Engine | 1 |
141-6135 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
124-3534 Piston & Rod Gp
| 12***24 | Piston As; (Grade F) | 4 |
| 12***25 | Piston As; (Grade G) | 4 |
| 12***26 | Piston As; (Grade H) | 4 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
135-2838 Pulley Gp-Fan & Alt Drive
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 1 |
| 12***87 | Adapter | 1 |
| 13***28 | Spacer | 1 |
120-8844 Suppression Gp-Sound
| 12***69 | Liner | 6 |
| 12***43 | Plate As | 1 |
| 12***19 | Plate As | 1 |
135-3000 Suppression Gp-Sound
| 11***51 | Film-Stripe; (98 cm) | 0 |
| 13***00 | Suppression Group-Sound | 1 |
| 13***29 | Clamp-Single | 1 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
Cooling System
127-3356 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***13 | Adapter | 1 |
| 10***23 | Plate | 1 |
127-2837 Lines Gp-Water
| 06***58 | Clamp-Hose | 2 |
| 12***34 | Hose | 1 |
| 12***35 | Connector | 1 |
127-3301 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 12***01 | Pump Group-Water | 1 |
| 6I***43 | Gear; (18-Teeth) | 1 |
127-3302 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 11***70 | Stud | 3 |
| 12***01 | Pump Group-Water | 1 |
117-7941 Radiator & Hyd Oil Cooler Gp
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 11***41 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***99 | Switch As-Temperature; (Power Mode Limiter) | 1 |
144-5980 Radiator & Hyd Oil Cooler Gp
| 12***40 | Hose; (16cm Each) | 0 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***53 | Cooler As-Oil, Cap, Cap; Lid | 1 |
117-7942 Radiator & Hyd Oil Cooler Gp
| 11***42 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 12***60 | Cooler-Water | 1 |
| 12***61 | Cooler-Oil | 1 |
150-3363 Screen Gp-Radiator
| 14***08 | Grid As | 1 |
| 14***09 | Grid As | 1 |
| 15***63 | Screen Group-Radiator | 1 |
130-4523 Valve Gp-Radiator Drain
| 11***07 | Fitting-Tube | 1 |
| 11***09 | Valve As-Shutoff | 1 |
| 13***22 | Fitting | 1 |
Electrical And Starting System
111-1914 Alarm Gp-Travel
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***14 | Alarm Group-Travel | 1 |
| 11***38 | Reducer | 2 |
147-9527 Alternator Gp-Charging
| 04***00 | Washer | 1 |
| 06***66 | Washer | 1 |
| 10***62 | Alternator Group-Charging | 1 |
123-9718 Battery & Wiring Gp
| 09***10 | Clamp | 2 |
| 09***61 | Strap; (Cable) | 20 |
| 11***15 | Grommet | 1 |
8r-8714 Battery Gp -Heavy Duty
| 8R***14 | Battery Group; -Maintenance Free | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
117-7993 Box Gp-Junction
| 09***92 | Clip | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***61 | Strap; (Cable) | 0 |
132-6640 Control Gp-Secondary Steering
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***40 | Control Group-Secondary Steering | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 4 |
140-6617 Diode Gp
| 14***17 | Diode Group | 1 |
| 14***18 | Diode As | 1 |
| 14***19 | Heat Sink | 1 |
111-1979 Lamp Gp-Head
| 11***79 | Lamp Group-Head | 1 |
| 11***19 | Lamp As; (Headlight) | 2 |
| 12***53 | Lockwasher | 2 |
116-9625 Lamp Gp-Rear
| 11***25 | Lamp Group-Rear | 1 |
| 11***20 | Glass As; (Rear Lamp) | 1 |
| 11***70 | Screw-Special | 2 |
111-1980 Lamp Gp-Rear
| 11***80 | Lamp Group-Rear | 1 |
| 11***25 | Lamp Group-Rear | 2 |
| 5W***40 | Lamp; (24-Volt, 5-Watt)(Rear Lamp) | 2 |
111-1924 Lamp Gp-Registration
| 11***24 | Lamp Group-Registration | 1 |
| 11***28 | Plate As | 1 |
| 11***23 | Lamp As | 2 |
116-9624 Lamp Gp-Signal
| 11***24 | Lamp Group-Signal | 1 |
| 11***19 | Glass As | 1 |
| 11***70 | Screw-Special | 2 |
116-9626 Lamp Gp-Signal -Front
| 11***26 | Lamp Group-Signal; -Front | 1 |
| 11***18 | Glass As; (Front Signal Lamp) | 1 |
| 11***69 | Screw | 1 |
111-1981 Lamp Gp-Signal
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 11***81 | Lamp Group-Signal | 1 |
| 11***26 | Lamp Group-Signal; -Front | 2 |
111-1978 Lamp Gp-Signal
| 11***78 | Lamp Group-Signal | 1 |
| 11***24 | Lamp Group-Signal | 2 |
| 6V***10 | Screw; (Machine) (M4x0.7x10mm) | 4 |
116-9627 Lamp Gp-Warning Beacon
| 11***27 | Lamp Group-Warning Beacon | 1 |
| 11***21 | Glass | 1 |
| 11***22 | Motor As | 1 |
118-1881 Lighting Gp-Backup
| 11***81 | Lighting Group-Backup | 1 |
| 12***76 | Lamp As-Flood | 1 |
| 12***53 | Lockwasher | 2 |
111-1959 Lighting Gp-Boom
| 11***59 | Lighting Group-Boom | 1 |
| 11***61 | Plate | 1 |
| 12***75 | Lamp As-Flood | 1 |
119-7781 Lighting Gp-Boom
| 11***62 | Plate | 1 |
| 11***81 | Lighting Group-Boom | 1 |
| 12***75 | Lamp As-Flood | 1 |
118-1882 Lighting Gp-Cab
| 11***82 | Lighting Group-Cab | 1 |
| 12***76 | Lamp As-Flood | 2 |
| 12***53 | Lockwasher | 2 |
111-1923 Lighting Gp-Roading
| 11***23 | Lighting Group-Roading | 1 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***39 | Plate | 1 |
111-1850 Lighting Gp-Roading
| 11***50 | Lighting Group-Roading | 1 |
| 11***78 | Lamp Group-Signal | 1 |
| 11***79 | Lamp Group-Head | 1 |
117-2976 Reflector Gp
| 11***21 | Reflector-Yellow | 4 |
| 11***22 | Reflector-Red | 2 |
| 11***76 | Reflector Group | 1 |
230-3602 Starting Aid Gp
| 03***59 | Plug-Start | 2 |
| 12***56 | Washer | 2 |
| 23***02 | Starting Aid Group | 1 |
127-2957 Starting Aid Gp-Ether
| 06***98 | Nut; (3/8-24-Thd) | 6 |
| 06***99 | Ferrule | 6 |
| 10***33 | Tube | 1 |
110-9458 Starting Motor Gp-Electric
| 10***61 | Starting Motor Group-Electric | 1 |
| 11***58 | Starting Motor Group-Electric | 1 |
| 11***85 | Ring | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
121-0797 Switch Gp-Magnetic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***96 | Switch | 1 |
| 12***97 | Switch Group-Magnetic | 1 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
133-1331 Switch Gp-Pressure -Freon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***76 | Switch-Press As | 1 |
| 13***31 | Switch Group-Pressure; -Freon | 1 |
141-6258 Switch Gp-Resistor
| 12***75 | Connector As | 1 |
| 14***57 | Switch As-Resistor | 1 |
| 14***58 | Switch Group-Resistor | 1 |
124-3424 Switch Gp-Resistor
| 11***91 | Switch As | 1 |
| 12***24 | Switch Group-Resistor | 1 |
| 12***75 | Connector As | 1 |
8u-5842 Switch Gp-Swivel
| 3C***85 | Screw-Countersink Head; (M6x16mm) | 3 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 7 |
| 5W***69 | Plate (Mounting) | 1 |
121-2974 Switch Gp-Swivel
| 12***74 | Switch Group-Swivel | 1 |
| 17***55 | Receptacle As | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
122-5777 Switch Gp-Window
| 12***70 | Switch; (Lower Window) | 1 |
| 12***26 | Plate As-Switch | 1 |
| 12***77 | Switch Group-Window | 1 |
137-7245 Switch Gp-Wiper
| 12***15 | Connector | 1 |
| 13***45 | Switch Group-Wiper | 1 |
| 5W***87 | Terminal-Blade; (12-Ga To 16-Ga) | 2 |
111-1917 Warning Gp-Overload
| 10***56 | Strap-Cable | 1 |
| 11***17 | Warning Group-Overload | 1 |
| 11***01 | Switch Group-Pressure; (Overload Pressure) | 1 |
126-3394 Wiring Gp-Air Conditioner
| 09***61 | Strap; (Cable) | 12 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
172-3700 Wiring Gp-Air Conditioner
| 09***61 | Strap; (Cable) | 4 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 17***00 | Wiring Group-Air Conditioner | 1 |
133-6422 Wiring Gp-Cab Riser
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***61 | Strap; (Cable) | 20 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
111-1865 Wiring Gp-Chassis
| 11***65 | Wiring Group-Chassis | 1 |
| 12***73 | Harness As | 1 |
| 9X***72 | Strap-Cable | 5 |
117-7959 Wiring Gp-Console
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 3 |
| 11***17 | Plate | 1 |
| 11***87 | Switch As; (Start, Pilot)(Start/Pilot Pressure Enable) | 1 |
137-9413 Wiring Gp-Control
| 09***61 | Strap; (Cable) | 10 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 12***69 | Diode As; (Brake) | 2 |
123-4789 Wiring Gp-Electronic Control
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 09***61 | Strap; (Cable) | 15 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
123-9719 Wiring Gp-Platform
| 09***61 | Strap; (Cable) | 0 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***75 | Switch Group-Directional; (Turn Signals) | 1 |
113-3205 Wiring Gp-Platform
| 09***61 | Strap; (Cable) | 20 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***75 | Switch Group-Directional; (Turn Signals) | 1 |
141-3995 Wiring Gp-Priority Valve
| 09***61 | Strap; (Cable) | 10 |
| 13***27 | Switch-Key; (Hydraulic Cab Riser (Hcr)) | 1 |
| 14***95 | Wiring Group-Priority Valve | 1 |
121-9144 Wiring Gp-Secondary Steering
| 09***61 | Strap; (Cable) | 15 |
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
121-2452 Wiring Gp-Undercarriage/Swivel
| 12***52 | Wiring Group-Undercarriage/Swivel | 1 |
| 12***72 | Harness As | 1 |
| 12***74 | Switch Group-Swivel | 1 |
Engine Arrangement
107-9665 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 10***13 | Housing Group-Flywheel | 1 |
| 10***18 | Lines Group-Engine Oil | 1 |
117-7940 Installation Ar-Engine
| 11***40 | Installation Ar-Engine | 1 |
| 11***41 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***50 | Air Cleaner Group | 1 |
Frame And Body
117-7965 Counterweight Gp
| 11***37 | Washer; (31x68x10-mm Thk) | 4 |
| 11***25 | Counterweight | 1 |
| 11***65 | Counterweight Group | 1 |
117-7971 Door Gp-Access
| 11***26 | Handle-Latch | 1 |
| 11***80 | Mount-Resilient | 2 |
| 11***29 | Bar-Lock | 1 |
117-7973 Door Gp-Access
| 11***26 | Handle-Latch | 1 |
| 11***73 | Door Group-Access | 1 |
| 11***66 | Liner | 1 |
113-0396 Door Gp-Access
| 11***98 | Hinge | 1 |
| 11***99 | Ball Joint | 1 |
| 11***96 | Door Group-Access | 1 |
117-7978 Door Gp-Storage
| 11***26 | Handle-Latch | 1 |
| 11***78 | Door Group-Storage | 1 |
| 11***67 | Liner | 1 |
130-2444 Door Gp-Tool Box
| 11***26 | Handle-Latch | 1 |
| 13***41 | Door As | 1 |
| 13***44 | Door Group-Tool Box | 1 |
117-7969 Enclosure Gp-Engine
| 10***93 | Plate | 1 |
| 11***14 | Plate As | 1 |
| 11***13 | Grommet | 2 |
122-1000 Enclosure Gp-Radiator
| 08***73 | Screw-Countersink Head | 2 |
| 09***23 | Screw; (M3x0.5x10-mm) | 3 |
| 11***99 | Ball Joint | 1 |
132-3340 Enclosure Gp-Radiator
| 11***99 | Ball Joint | 1 |
| 11***00 | Rod As | 1 |
| 11***24 | Liner | 1 |
117-7976 Enclosure Gp-Storage
| 10***84 | Bolt-Socket Head; (M12x1.75x120-mm) | 2 |
| 11***59 | Hinge | 1 |
| 11***64 | Angle | 1 |
117-7974 Firewall Gp
| 11***00 | Plate As | 1 |
| 11***23 | Plate | 1 |
| 11***74 | Firewall Group | 1 |
117-7963 Frame Gp-Upper
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
117-7990 Gear & Bearing Gp-Swing
| 08***11 | Spacer; (20.6x38x6-mm Thk) | 34 |
| 11***33 | Spacer | 30 |
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 3 |
117-7957 Guard Gp-Bottom
| 11***24 | Cover-Rear; (Lh)(Rear, Lh) | 1 |
| 11***27 | Cover; (Rh Front) | 1 |
| 11***86 | Cover-Rear; (Rh)(Rh Rear) | 1 |
117-7967 Hood & Guard Ar
| 11***96 | Door Group-Access | 1 |
| 11***97 | Step Group | 1 |
| 11***67 | Hood & Guard Ar | 1 |
135-0670 Step Gp
| 13***30 | Step As | 1 |
| 13***44 | Door Group-Tool Box | 1 |
| 13***69 | Seal | 1 |
135-2445 Step Gp
| 13***60 | Step As | 1 |
| 13***45 | Step Group | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
117-0666 Step Gp
| 10***87 | Bolt; (M5x0.8x12-mm) | 8 |
| 11***13 | Step As | 1 |
| 11***04 | Hinge | 1 |
113-0397 Step Gp
| 11***14 | Tube As | 1 |
| 11***91 | Plate | 1 |
| 11***92 | Tube As | 1 |
111-1894 Step Gp
| 11***94 | Step Group | 1 |
| 11***13 | Step As | 1 |
| 11***03 | Plate | 4 |
117-7980 Walkway Gp
| 11***74 | Plate As | 1 |
| 11***78 | Plate As | 1 |
| 11***83 | Plate As | 1 |
Fuel System
112-7593 Actuator Gp-Governor
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***93 | Actuator Group-Governor | 1 |
| 14***28 | Kit-Cylinder Seal | 1 |
152-0197 Actuator Gp-Governor
| 11***93 | Actuator Group-Governor | 1 |
| 15***97 | Actuator Group-Governor | 1 |
| 17***53 | Receptacle As; (3 Pin) | 1 |
121-4414 Control Gp-Governor
| 09***44 | Pin-Cotter | 2 |
| 11***93 | Actuator Group-Governor | 1 |
| 11***77 | Hose As | 1 |
123-9717 Control Gp-Governor
| 09***44 | Pin-Cotter | 2 |
| 11***40 | Hose As | 1 |
| 12***87 | Seal | 1 |
139-7393 Control Gp-Governor
| 11***99 | Ball Joint | 1 |
| 11***40 | Hose As | 1 |
| 12***84 | Pin | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
8u-0876 Hose Gp-Refueling
| 5W***50 | Clamp-Hose | 2 |
| 5W***54 | Coupling-Hose | 1 |
| 5W***55 | Hose As.-Suction | 1 |
117-7987 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 10***25 | Separator Group-Water | 1 |
| 11***87 | Lines Group-Fuel | 1 |
127-8159 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
127-3306 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
5w-8633 Pump Gp-Fuel Transfer -Refueling
| 09***16 | Ring-Retaining | 1 |
| 1D***33 | Bolt 5.72 cm(2.25 In.) Long | 1 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 1 |
127-2229 Pump Gp-Fuel Injection
| 10***77 | Stud | 3 |
| 11***22 | Nut | 1 |
| 11***23 | Washer | 1 |
118-7468 Pump Gp-Fuel Transfer
| 11***68 | Pump Group-Fuel Transfer | 1 |
| 12***29 | Hose; (240-cm Each) | 0 |
| 12***32 | Tube | 1 |
101-3925 Separator Gp-Water
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
117-7989 Tank & Mtg Gp-Fuel
| 11***78 | Sender-Fuel Level | 1 |
| 11***20 | Tank As-Fuel | 1 |
| 11***89 | Tank & Mtg Group-Fuel | 1 |
129-5576 Tank & Mtg Gp-Fuel
| 11***78 | Sender-Fuel Level | 1 |
| 12***87 | Seal | 1 |
| 12***75 | Tank As-Fuel | 1 |
Hydraulic System
255-8549 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 25***49 | Accumulator Group-Hydraulic; -Uncharged | 1 |
8u-2924 Accumulator Gp-Hydraulic -Charged
| 8U***24 | Accumulator Group-Hydraulic; -Charged | 1 |
159-8010 Actuator Gp-Pump
| 15***10 | Actuator Group-Pump | 1 |
| 15***44 | Cover | 1 |
| 15***45 | Cover | 1 |
133-4736 Actuator Gp-Pump
| 12***61 | Bushing | 2 |
| 12***64 | Ring | 2 |
| 12***65 | Kit-Seal | 1 |
126-5317 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***17 | Barrel Group-Pump | 1 |
140-1800 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***32 | Piston | 9 |
117-5705 Barrel Gp-Pump
| 11***05 | Barrel Group-Pump | 1 |
| 11***60 | Cylinder As | 1 |
| 11***61 | Cradle | 1 |
136-7780 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***32 | Piston | 9 |
118-7977 Block Gp-Hydraulic
| 11***77 | Block Group-Hydraulic | 1 |
| 4F***91 | Seal (1.302" Diameter); Seal--To Seal Pumps To Case | 2 |
| 5F***78 | Seal --Drain Tube To Flywheel Housing; -- Drain Tube To Flywheel Housing | 1 |
123-0170 Body Gp-Valve
| 12***70 | Body Group-Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
123-0174 Body Gp-Valve
| 12***74 | Body Group-Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
123-0171 Body Gp-Valve
| 12***71 | Body Group-Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 4 |
121-6825 Cartridge As
| 12***25 | Cartridge As | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 2 |
138-3363 Control Ar-Auxiliary
| 11***20 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***11 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***08 | Lines Group-Implement Control | 1 |
138-3362 Control Ar-Auxiliary
| 11***14 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***10 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***08 | Lines Group-Implement Control | 1 |
114-8699 Control Gp-Blade & Stabilizer
| 11***99 | Control Group-Blade & Stabilizer | 1 |
| 11***81 | Plate | 1 |
| 11***84 | Handle | 1 |
111-1901 Control Gp-Brake
| 11***01 | Control Group-Brake | 1 |
| 11***17 | Pedal Group | 1 |
| 12***08 | Cylinder Group-Master | 1 |
111-1904 Control Gp-Impl Stblzr & Brake
| 11***04 | Control Group-Impl Stblzr & Brake | 1 |
| 11***29 | Control Group-Joystick | 2 |
| 11***99 | Control Group-Blade & Stabilizer | 1 |
140-1801 Control Gp-Pump
| 12***61 | Bushing | 2 |
| 12***64 | Ring | 2 |
| 12***65 | Kit-Seal | 1 |
134-9717 Coupling Gp-Flexible
| 11***92 | Coupling Group-Flexible | 1 |
| 13***80 | Coupling Group-Flexible | 1 |
| 13***17 | Coupling Group-Flexible | 1 |
142-0467 Coupling Gp-Flexible
| 14***67 | Coupling Group-Flexible | 1 |
| 14***03 | Coupling As | 1 |
| 8U***51 | Gear | 1 |
122-1207 Coupling Gp-Flexible
| 11***92 | Coupling Group-Flexible | 1 |
| 12***07 | Coupling Group-Flexible | 1 |
| 7X***74 | Bolt | 8 |
111-1992 Coupling Gp-Flexible
| 11***92 | Coupling Group-Flexible | 1 |
| 14***03 | Coupling As | 1 |
| 8U***51 | Gear | 1 |
134-9680 Coupling Gp-Flexible
| 13***80 | Coupling Group-Flexible | 1 |
| 13***82 | Hub | 1 |
| 15***58 | Flange | 1 |
114-0208 Cover Gp-Valve
| 11***08 | Cover Group-Valve | 1 |
| 11***71 | Plate | 1 |
| 11***74 | Plug | 2 |
120-0306 Cylinder & Mtg Gp-Axle Lock
| 12***06 | Cylinder & Mtg Group-Axle Lock | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 8 |
| 8U***61 | Cylinder Group | 2 |
118-5328 Cylinder & Seal Gp
| 09***34 | Shim; (T=69.85mm) | 2 |
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 11***89 | Cylinder Group-Boom | 1 |
118-5512 Cylinder & Seal Gp
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 11***12 | Cylinder Group-Bucket | 1 |
| 11***12 | Cylinder & Seal Group | 1 |
118-5346 Cylinder & Seal Gp-Boom
| 09***34 | Shim; (T=69.85mm) | 2 |
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 11***79 | Cylinder Group-Boom | 1 |
118-5348 Cylinder & Seal Gp-Boom
| 09***54 | Seal; (Id=79.85mm) | 4 |
| 11***03 | Cylinder Group-Variable Adj Boom | 1 |
| 11***48 | Cylinder & Seal Group-Boom | 1 |
118-5322 Cylinder & Seal Gp-Stick
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 11***72 | Cylinder Group-Stick | 1 |
| 11***22 | Cylinder & Seal Group-Stick | 1 |
8u-4461 Cylinder Gp-Axle Osc Lock
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 4 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
120-0409 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***15 | Piston | 1 |
142-1625 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***17 | Cone | 1 |
113-4989 Cylinder Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***54 | Ring; (Buck Up) | 1 |
| 09***39 | Ring; (Retaining) | 1 |
113-4979 Cylinder Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***54 | Ring; (Buck Up) | 1 |
| 09***39 | Ring; (Retaining) | 1 |
114-9312 Cylinder Gp-Bucket
| 09***19 | Ring, Back-Up | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***00 | Ring-Retaining | 1 |
120-4708 Cylinder Gp-Master
| 12***08 | Cylinder Group-Master | 1 |
| 12***27 | Collar | 1 |
| 12***28 | Kit-Seal | 1 |
120-0434 Cylinder Gp-Stabilizer
| 11***20 | Seal-O-Ring | 1 |
| 11***08 | Rod | 1 |
| 11***12 | Piston | 1 |
114-1872 Cylinder Gp-Stick
| 09***79 | Seal-U-Cup | 1 |
| 09***84 | Seal-Buffer | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
114-8803 Cylinder Gp-Variable Adj Boom
| 08***36 | Ring-Backup | 1 |
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 1 |
| 09***32 | Seal; (Id=129.60mm) | 1 |
5w-2482 Cylinder Gp-Bucket Tilt
| 5W***72 | Seal-O-Ring; (88.0mm Id) | 1 |
| 5W***23 | Repair Kit-Gasket (Bucket Tilt Cyl) | 1 |
| 5W***82 | Cylinder Group.; (Bucket) | 1 |
249-1278 Distributor Gp-Swivel
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
| 11***75 | Ring-Split | 1 |
117-7985 Drive Gp-Swing
| 11***85 | Drive Group-Swing | 1 |
| 12***14 | Drive Group-Swing | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 12 |
120-4712 Drive Gp-Swing
| 09***19 | Ring-Retaining | 3 |
| 09***21 | Ring-Retaining | 4 |
| 11***33 | Nut | 2 |
120-4714 Drive Gp-Swing
| 12***12 | Drive Group-Swing | 1 |
| 12***13 | Motor Group-Swing | 1 |
| 12***14 | Drive Group-Swing | 1 |
8u-0198 Filter Gp-Oil -Hydraulic
| 8U***98 | Filter Group; -Hydraulic | 1 |
| 8U***22 | Holder-Filter | 1 |
| 8U***23 | Filter Element-Oil; (Hydraulic Oil Return) | 1 |
133-3155 Filter Gp-Oil
| 13***55 | Filter Group-Oil | 1 |
| 13***71 | Plug | 1 |
| 13***72 | Plug | 1 |
123-0177 Filter Gp-Oil
| 12***77 | Filter Group-Oil | 1 |
| 12***73 | Seal-O-Ring | 1 |
109-7288 Filter Gp-Oil -Hydraulic, Swing Circuit
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 10***89 | Filter Element As-Oil; (Standard Efficiency)(Swing Circuit) | 1 |
| 11***51 | Housing | 1 |
109-7286 Filter Gp-Oil
| 10***86 | Filter Group-Oil | 1 |
| 10***87 | Filter Element-Oil; (Standard Efficiency)(Hydraulic Oil Filter) | 1 |
| 11***01 | Base As-Filter | 1 |
125-5387 Fitting Gp-Hydraulic -Quick Disconnect
| 12***87 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 12***41 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 8U***11 | Cap - Protection | 2 |
8u-0966 Fitting Gp-Hydraulic -Quick Disconnect
| 5W***17 | Seal-O-Ring (Outside) | 1 |
| 8U***66 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***43 | Seal-O-Ring (Inside) | 1 |
125-5388 Fitting Gp-Hydraulic
| 12***88 | Fitting Group-Hydraulic | 1 |
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
125-2628 Gauge Gp-Sight
| 12***66 | Stop | 2 |
| 12***67 | Seal-O-Ring | 2 |
| 12***69 | Glass | 1 |
136-7781 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***28 | Screw | 2 |
117-5708 Head Gp-Pump
| 08***72 | Plug-O-Ring | 2 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 3 |
| 11***08 | Head Group-Pump | 1 |
126-5320 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
125-4181 Housing Gp-Swing
| 12***81 | Housing Group-Swing | 1 |
| 12***20 | Shaft | 1 |
| 12***22 | Washer | 1 |
118-7716 Lines Gp-Auxiliary Hydraulic
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 16 |
| 11***57 | Clamp | 12 |
| 11***41 | Hose As | 2 |
118-7714 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 8 |
| 11***88 | Tube As | 1 |
| 11***90 | Tube As | 1 |
118-7683 Lines Gp-Auxiliary Hydraulic
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 8 |
| 11***07 | Clamp; (Lh) | 8 |
126-8810 Lines Gp-Auxiliary Hydraulic
| 09***61 | Strap; (Cable) | 10 |
| 12***10 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***35 | Plate | 1 |
118-7710 Lines Gp-Auxiliary Hydraulic
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 16 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 11***57 | Clamp | 4 |
118-7720 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 10 |
| 11***92 | Hose As | 2 |
| 11***17 | Tube As | 2 |
126-8811 Lines Gp-Auxiliary Hydraulic
| 09***61 | Strap; (Cable) | 14 |
| 12***49 | Hose As | 2 |
| 12***11 | Lines Group-Auxiliary Hydraulic | 1 |
118-7681 Lines Gp-Auxiliary Hydraulic
| 11***07 | Clamp; (Lh) | 8 |
| 11***85 | Tube As | 1 |
| 11***86 | Tube As | 1 |
120-0438 Lines Gp-Blade Cylinder
| 11***74 | Valve Group-Solenoid | 1 |
| 11***92 | Hose As | 1 |
| 11***93 | Hose As | 2 |
120-0408 Lines Gp-Blade Cylinder
| 11***92 | Hose As | 2 |
| 11***93 | Hose As | 2 |
| 12***08 | Lines Group-Blade Cylinder | 1 |
118-5344 Lines Gp-Boom
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 40 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 2 |
| 11***57 | Clamp | 4 |
118-5326 Lines Gp-Boom
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 16 |
| 11***57 | Clamp | 6 |
| 11***98 | Plate | 1 |
118-2267 Lines Gp-Boom Cylinder
| 11***54 | Plate | 2 |
| 11***89 | Tube As | 1 |
| 11***90 | Tube As | 1 |
122-7012 Lines Gp-Bucket Tilt Cylinder
| 11***49 | Fitting; (Quick Disconnect, Male) | 2 |
| 11***54 | Cap | 2 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
118-2268 Lines Gp-Check Valve
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 8 |
| 10***56 | Strap-Cable | 2 |
| 11***49 | Plate | 1 |
118-5519 Lines Gp-Check Valve
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***56 | Strap-Cable | 10 |
| 11***80 | Valve Group-Load Control | 1 |
118-5518 Lines Gp-Check Valve
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***56 | Strap-Cable | 2 |
| 11***81 | Valve Group-Load Control | 1 |
118-5511 Lines Gp-Diverter Valve
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
| 11***11 | Lines Group-Diverter Valve | 1 |
| 12***57 | Hose As | 2 |
117-8021 Lines Gp-Front
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 1 |
| 11***54 | Hose As | 2 |
| 11***55 | Hose As | 2 |
120-0305 Lines Gp-Hydraulic
| 11***23 | Clamp-Single | 4 |
| 11***02 | Clamp-Single | 2 |
| 12***05 | Lines Group-Hydraulic | 1 |
120-0304 Lines Gp-Hydraulic
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***81 | Hose As | 1 |
| 11***45 | Hose As | 2 |
120-0308 Lines Gp-Hydraulic
| 11***38 | Hose As | 1 |
| 11***40 | Hose As | 1 |
| 11***41 | Hose As | 2 |
117-8019 Lines Gp-Hydraulic
| 11***19 | Lines Group-Hydraulic | 1 |
| 12***93 | Hose As | 1 |
| 12***94 | Hose As | 1 |
134-5808 Lines Gp-Implement Control
| 11***59 | Hose As | 2 |
| 13***08 | Lines Group-Implement Control | 1 |
| 13***09 | Valve Group-Solenoid | 1 |
121-4446 Lines Gp-Load Control Valve
| 11***24 | Hose As | 1 |
| 11***27 | Hose As | 1 |
| 12***46 | Lines Group-Load Control Valve | 1 |
122-1548 Lines Gp-Load Control Valve
| 11***34 | Hose As | 1 |
| 12***58 | Hose As | 1 |
| 12***48 | Lines Group-Load Control Valve | 1 |
111-1921 Lines Gp-Load Control Valve
| 11***21 | Lines Group-Load Control Valve | 1 |
| 12***20 | Hose As | 1 |
| 12***22 | Hose As | 1 |
123-9470 Lines Gp-Load Control Valve
| 11***27 | Hose As | 1 |
| 12***70 | Lines Group-Load Control Valve | 1 |
| 12***37 | Hose As | 1 |
132-8014 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***14 | Lines Group-Pilot | 1 |
| 13***65 | Hose As-Orfs | 1 |
123-0229 Lines Gp-Pilot
| 11***32 | Hose As | 1 |
| 11***51 | Hose As | 1 |
| 11***79 | Hose As | 1 |
123-9739 Lines Gp-Pilot
| 11***34 | Hose As | 2 |
| 11***53 | Hose As | 1 |
| 11***46 | Hose As | 1 |
117-8016 Lines Gp-Pilot
| 11***02 | Valve Group-Pilot Manifold | 1 |
| 11***20 | Hose As | 1 |
| 11***31 | Hose As | 1 |
133-6294 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***54 | Hose As | 4 |
| 13***94 | Lines Group-Pilot | 1 |
134-9727 Lines Gp-Pilot
| 13***65 | Hose As-Orfs | 1 |
| 13***27 | Lines Group-Pilot | 1 |
123-9743 Lines Gp-Pilot
| 11***90 | Hose As | 1 |
| 11***53 | Flange | 1 |
| 11***99 | Nut-Hex; (M33x1.5-Thd) | 2 |
111-1995 Lines Gp-Pilot
| 11***95 | Lines Group-Pilot | 1 |
| 11***33 | Hose As | 1 |
| 11***35 | Hose As | 1 |
132-8019 Lines Gp-Pilot
| 11***40 | Hose As | 1 |
| 11***41 | Hose As | 1 |
| 12***32 | Hose As | 6 |
133-6292 Lines Gp-Pilot
| 13***54 | Hose As | 3 |
| 13***92 | Lines Group-Pilot | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 6 |
132-3773 Lines Gp-Pilot
| 11***35 | Hose As | 1 |
| 11***36 | Hose As | 1 |
| 11***49 | Hose As | 1 |
133-6293 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***54 | Hose As | 2 |
| 13***93 | Lines Group-Pilot | 1 |
132-8017 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***17 | Lines Group-Pilot | 1 |
| 13***54 | Hose As | 3 |
118-4566 Lines Gp-Pilot
| 11***77 | Stud | 2 |
| 11***75 | Clamp | 6 |
| 11***46 | Tube As | 1 |
118-7404 Lines Gp-Pilot
| 11***39 | Hose As | 1 |
| 11***69 | Hose As | 2 |
| 11***78 | Hose As | 1 |
123-9745 Lines Gp-Pilot
| 11***78 | Hose As | 1 |
| 11***88 | Hose As | 1 |
| 12***45 | Lines Group-Pilot | 1 |
121-0532 Lines Gp-Pressure Test
| 12***27 | Hose As | 2 |
| 12***28 | Hose As | 3 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 9 |
133-8053 Lines Gp-Pressure Test
| 12***28 | Hose As | 2 |
| 13***53 | Lines Group-Pressure Test | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 4 |
125-3489 Lines Gp-Pressure Test
| 12***28 | Hose As | 5 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 9 |
| 12***42 | Hose As | 2 |
117-8022 Lines Gp-Pump
| 10***16 | Flange | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***66 | Hose | 1 |
117-8015 Lines Gp-Return
| 10***38 | Hose-Return | 1 |
| 10***17 | Flange | 1 |
| 11***03 | Block-Return | 1 |
112-7165 Lines Gp-Stabilizer
| 11***65 | Lines Group-Stabilizer | 1 |
| 11***47 | Valve Group-Solenoid | 1 |
| 11***96 | Hose As | 3 |
123-9741 Lines Gp-Steering
| 11***83 | Hose As | 1 |
| 11***92 | Hose As | 1 |
| 11***93 | Hose As | 1 |
132-8021 Lines Gp-Steering
| 13***21 | Lines Group-Steering | 1 |
| 13***33 | Hose As | 3 |
| 13***34 | Hose As | 1 |
117-8020 Lines Gp-Steering
| 11***83 | Hose As | 1 |
| 11***92 | Hose As | 1 |
| 11***93 | Hose As | 1 |
118-7510 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 11***10 | Lines Group-Stick | 1 |
118-7514 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 11***14 | Lines Group-Stick | 1 |
118-6182 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
118-7512 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 11***12 | Lines Group-Stick | 1 |
118-6192 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***92 | Lines Group-Stick | 1 |
118-6190 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 8 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
118-6191 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***91 | Lines Group-Stick | 1 |
118-7526 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 11***53 | Cap | 2 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 2 |
118-6185 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
118-6186 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
120-0427 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
118-6183 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 8 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
120-0441 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 12***41 | Lines Group-Stick | 1 |
118-6194 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***94 | Lines Group-Stick | 1 |
118-7513 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 11***13 | Lines Group-Stick | 1 |
118-6193 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***93 | Lines Group-Stick | 1 |
120-0428 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 8 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
118-7524 Lines Gp-Stick
| 11***86 | Clamp-Single | 4 |
| 11***24 | Lines Group-Stick | 1 |
| 12***57 | Hose As | 2 |
118-6189 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 8 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
118-6188 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 8 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
118-6187 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
117-8014 Lines Gp-Swing Drive
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 11***54 | Hose As | 1 |
| 11***57 | Hose As | 1 |
132-4275 Lines Gp-Swing Drive
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 11***54 | Hose As | 1 |
| 11***78 | Hose As | 1 |
111-1887 Motor & Mtg Gp-Travel
| 11***87 | Motor & Mtg Group-Travel | 1 |
| 11***12 | Motor Group-Travel | 1 |
| 13***49 | Spacer | 2 |
120-4713 Motor Gp-Swing
| 09***55 | Bolt; (Socket Head) | 4 |
| 09***39 | Ring; (Retaining) | 1 |
| 10***48 | Valve Group-Shuttle; (Piston Motor) | 1 |
111-2012 Motor Gp-Travel
| 09***55 | Bolt; (M14x2x70-mm) | 7 |
| 10***99 | Plug | 1 |
| 10***86 | Seal-O-Ring | 1 |
118-9168 Pump & Motor Gp-Steering -Secondary
| 11***68 | Pump & Motor Group-Steering; -Secondary | 1 |
| 13***93 | Motor As-Electric | 1 |
| 13***94 | Seal | 1 |
117-8024 Pump & Mtg Gp-Main Hydraulic
| 11***24 | Pump & Mtg Group-Main Hydraulic | 1 |
| 11***26 | Pump Group-Main & Swing | 1 |
| 6V***20 | Bolt; (M10x1.5x30-mm) | 12 |
117-8030 Pump & Mtg Gp-Steering & Brake
| 11***30 | Pump & Mtg Group-Steering & Brake | 1 |
| 14***57 | Pump Group-Gear | 1 |
| 14***47 | Drive Group-Accessory | 1 |
117-8031 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 11***39 | Plate | 1 |
| 11***40 | Housing-Gear | 1 |
8u-8062 Pump Gp-Gear -Secondary Steering
| 5W***90 | Plug | 2 |
| 5W***18 | Lockwasher | 2 |
| 5W***40 | Repair-Kit Seal | 1 |
126-5321 Pump Gp-Gear -Charge
| 11***22 | Seal-Ring | 1 |
| 12***21 | Pump Group-Gear; -Charge | 1 |
| 12***82 | Pump Group-Gear; -Charge | 1 |
126-5682 Pump Gp-Gear -Charge
| 11***22 | Seal-Ring | 1 |
| 12***76 | Bushing | 1 |
| 12***82 | Pump Group-Gear; -Charge | 1 |
197-1529 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 11***39 | Plate | 1 |
| 11***40 | Housing-Gear | 1 |
143-4757 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 11***39 | Plate | 1 |
| 11***42 | Coupling | 1 |
117-8026 Pump Gp-Main & Swing
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 2 |
| 11***26 | Pump Group-Main & Swing | 1 |
| 13***47 | Pump Group-Main Hydraulic | 1 |
130-2447 Pump Gp-Main Hydraulic
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***05 | Barrel Group-Pump | 1 |
| 11***08 | Head Group-Pump | 1 |
129-8082 Pump Gp-Metering
| 12***82 | Pump Group-Metering | 1 |
| 13***74 | Valve As | 1 |
| 13***78 | Ring | 1 |
132-7333 Pump Gp-Swing
| 09***45 | Plug-Hex; (9/16-18 Thd) | 2 |
| 10***99 | Plug | 1 |
| 11***26 | Pin | 1 |
139-9531 Pump Gp-Swing
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 10***99 | Plug | 1 |
| 11***26 | Pin | 1 |
120-0436 Stabilizer Ar
| 11***65 | Lines Group-Stabilizer | 1 |
| 12***33 | Stabilizer Ar | 1 |
| 12***34 | Cylinder Group-Stabilizer | 2 |
120-0433 Stabilizer Ar
| 11***65 | Lines Group-Stabilizer | 1 |
| 12***33 | Stabilizer Ar | 1 |
| 12***34 | Cylinder Group-Stabilizer | 2 |
127-1481 Steering Ar-Secondary
| 12***44 | Wiring Group-Secondary Steering | 1 |
| 12***81 | Steering Ar-Secondary | 1 |
| 12***82 | Steering Group-Hydraulic | 1 |
111-1898 Steering Column Gp
| 09***92 | Clamp, Hose | 3 |
| 11***98 | Steering Column Group | 1 |
| 11***99 | Valve Group-Flow Control | 1 |
5w-5238 Steering Column Gp
| 13***89 | Contact | 1 |
| 13***90 | Cap | 1 |
| 13***91 | Seal-O-Ring; (12.5mm Id) | 1 |
121-1984 Steering Column Gp
| 11***99 | Valve Group-Flow Control | 1 |
| 12***84 | Steering Column Group | 1 |
| 12***91 | Steering Column Group | 1 |
121-1991 Steering Column Gp
| 09***55 | Pin-Spring; (20 mm Long) | 1 |
| 12***91 | Steering Column Group | 1 |
| 12***75 | Screw | 1 |
112-5706 Steering Column Gp
| 11***06 | Steering Column Group | 1 |
| 12***96 | Contact As | 1 |
| 6V***27 | Nut; (M18x1.5-6-Thd) | 1 |
127-1482 Steering Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***68 | Pump & Motor Group-Steering; -Secondary | 1 |
| 12***52 | Fitting | 1 |
117-5713 Support Gp-Valve
| 11***13 | Support Group-Valve | 1 |
| 11***27 | Flange | 1 |
| 11***28 | Hub-Clutch | 1 |
111-1896 Swivel & Mounting Gp
| 11***28 | Plate | 1 |
| 11***96 | Swivel & Mounting Group | 1 |
| 13***68 | Swivel Group | 1 |
139-3368 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 13***68 | Swivel Group | 1 |
| 13***69 | Swivel Group | 1 |
8u-5851 Swivel Gp
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 5 |
| 2Y***81 | Lockwasher | 6 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 7 |
111-2015 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 11***38 | Swivel Group | 1 |
| 2Y***81 | Lockwasher | 2 |
117-1738 Swivel Gp
| 11***38 | Swivel Group | 1 |
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
139-3369 Swivel Gp
| 12***46 | Lockwasher | 2 |
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 2 |
| 13***69 | Swivel Group | 1 |
292-2769 Swivel Gp
| 11***24 | Hose As | 2 |
| 11***13 | Tank Group-Hydraulic | 1 |
| 12***28 | Gauge Group-Sight | 1 |
249-1277 Swivel Gp
| 11***93 | Lockwasher | 2 |
| 24***77 | Swivel Group | 1 |
| 24***78 | Distributor Group-Swivel | 1 |
292-2770 Swivel Gp
| 11***24 | Hose As | 1 |
| 11***13 | Tank Group-Hydraulic | 1 |
| 12***28 | Gauge Group-Sight | 1 |
117-8011 Tank & Mtg Gp-Hydraulic
| 03***92 | Seal; (126.59mm Id) | 1 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 10***38 | Plate | 1 |
117-8013 Tank Gp-Hydraulic
| 11***47 | Valve & Lines Group-Auxiliary | 1 |
| 11***13 | Tank Group-Hydraulic | 1 |
| 11***10 | Lines Group-Auxiliary Hydraulic | 1 |
118-7698 Valve & Lines Ar
| 11***76 | Valve & Lines Group-Auxiliary | 1 |
| 11***98 | Valve & Lines Ar | 1 |
| 11***14 | Lines Group-Auxiliary Hydraulic | 1 |
118-7708 Valve & Lines Ar
| 11***08 | Valve & Lines Ar | 1 |
| 11***16 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***66 | Valve & Lines Group-Auxiliary | 1 |
120-0689 Valve & Lines Ar-Auxiliary
| 11***45 | Valve Group-Control | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***38 | Hose As | 1 |
118-7706 Valve & Lines Ar-Auxiliary
| 11***83 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***06 | Valve & Lines Ar-Auxiliary | 1 |
| 12***09 | Valve & Lines Group-Auxiliary | 1 |
120-0701 Valve & Lines Ar-Auxiliary
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 11***45 | Valve Group-Control | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
120-0686 Valve & Lines Ar-Auxiliary
| 11***81 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***10 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***86 | Valve & Lines Ar-Auxiliary | 1 |
118-7700 Valve & Lines Ar-Auxiliary
| 11***76 | Valve & Lines Group-Auxiliary | 1 |
| 11***00 | Valve & Lines Ar-Auxiliary | 1 |
| 11***20 | Lines Group-Auxiliary Hydraulic | 1 |
118-7677 Valve & Lines Ar-Auxiliary
| 11***77 | Valve & Lines Ar-Auxiliary | 1 |
| 11***83 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***16 | Lines Group-Auxiliary Hydraulic | 1 |
123-9489 Valve & Lines Gp-Auxiliary
| 11***49 | Valve Group-Solenoid | 1 |
| 12***89 | Valve & Lines Group-Auxiliary | 1 |
| 12***24 | Tube As | 1 |
122-8207 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 2 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***38 | Hose As | 1 |
122-8210 Valve & Lines Gp-Auxiliary
| 11***01 | Valve Group-Solenoid | 1 |
| 11***59 | Hose As | 2 |
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
123-0194 Valve & Lines Gp-Auxiliary
| 11***59 | Hose As | 2 |
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 4 |
119-4566 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 2 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 2 |
| 11***38 | Hose As | 1 |
111-2047 Valve & Lines Gp-Auxiliary
| 11***47 | Valve & Lines Group-Auxiliary | 1 |
| 11***01 | Valve Group-Solenoid | 1 |
| 11***59 | Hose As | 2 |
112-7776 Valve & Lines Gp-Auxiliary
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 11***45 | Valve Group-Control | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
112-7601 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 2 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 2 |
| 11***01 | Valve & Lines Group-Auxiliary | 1 |
122-8209 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 3 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 2 |
| 11***38 | Hose As | 1 |
134-3762 Valve & Lines Gp-Priority
| 11***02 | Support As-Valve | 1 |
| 11***92 | Support As-Valve | 1 |
| 13***74 | Valve Group-Main Control | 1 |
117-0665 Valve & Lines Gp-Priority
| 11***02 | Support As-Valve | 1 |
| 11***92 | Support As-Valve | 1 |
| 11***65 | Valve & Lines Group-Priority | 1 |
117-8017 Valve & Mtg Gp-Main Control
| 11***99 | Plug | 1 |
| 11***24 | Setscrew | 1 |
| 11***17 | Valve & Mtg Group-Main Control | 1 |
126-3843 Valve As-Brake
| 12***43 | Valve As-Brake | 1 |
| 5P***66 | Seal-O-Ring (Id=32.92mm) | 2 |
| 9X***76 | Seal-O-Ring | 2 |
8u-5873 Control Gp-Brake & Axle Lock
| 03***44 | Seal-O-Ring | 1 |
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 2 |
8u-5649 Valve Gp-Bypass & Relief
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***75 | Housing | 1 |
| 11***76 | Retainer-Spring | 2 |
8u-5707 Valve Gp-Brake Control
| 10***67 | Valve | 1 |
| 11***70 | Ring-Retaining | 1 |
| 11***44 | Hose As | 1 |
121-9948 Valve Gp-Brake Control
| 09***56 | Setscrew-Socket | 1 |
| 12***48 | Valve Group-Brake Control | 1 |
| 5K***21 | Seal-O-Ring | 1 |
111-1875 Valve Gp-Bypass
| 10***67 | Valve | 1 |
| 11***75 | Valve Group-Bypass | 1 |
| 11***70 | Ring-Retaining | 1 |
132-3771 Valve Gp-Bypass & Relief
| 11***79 | Piston | 1 |
| 12***64 | Ring-Split | 4 |
| 12***69 | Dowel | 1 |
119-9045 Valve Gp-Check
| 11***03 | Cone | 2 |
| 11***04 | Spring | 2 |
| 11***05 | Plug | 2 |
119-9046 Valve Gp-Check
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***46 | Valve Group-Check | 1 |
| 12***07 | Kit-Seal; (Solenoid Valve) | 1 |
112-5445 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***45 | Valve Group-Control | 1 |
255-9101 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***91 | Ball | 1 |
115-2408 Valve Gp-Diverter
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***08 | Valve Group-Diverter | 1 |
120-5946 Valve Gp-Diverter
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***46 | Valve Group-Diverter | 1 |
| 12***96 | Lever | 1 |
128-6727 Valve Gp-Diverter
| 12***93 | Washer | 7 |
| 12***94 | Washer | 1 |
| 12***95 | Washer | 2 |
115-2407 Valve Gp-Diverter
| 11***07 | Valve Group-Diverter | 1 |
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 1 |
| 12***18 | Housing | 1 |
129-6666 Valve Gp-Diverter
| 12***96 | Piston | 1 |
| 12***97 | Ring | 1 |
| 12***98 | Plug | 1 |
111-1899 Valve Gp-Flow Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***99 | Valve Group-Flow Control | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
123-0154 Valve Gp-Flow Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 11***46 | Valve Group-Check | 1 |
113-7180 Valve Gp-Load Control
| 11***80 | Valve Group-Load Control | 1 |
| 11***86 | Valve-Check | 1 |
| 11***87 | Body | 1 |
152-7467 Valve Gp-Load Control
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 3 |
| 11***02 | Housing | 1 |
| 11***03 | Cone | 9 |
113-7181 Valve Gp-Load Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 11***81 | Valve Group-Load Control | 1 |
137-8731 Valve Gp-Load Control
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 3 |
| 11***02 | Housing | 1 |
| 11***03 | Cone | 9 |
141-7600 Valve Gp-Main Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 14***00 | Valve Group-Main Control | 1 |
| 5W***20 | Locknut; (M8-Thd) | 1 |
140-2228 Valve Gp-Main Control
| 14***28 | Valve Group-Main Control | 1 |
| 14***17 | Valve Group-Main Control | 1 |
117-8018 Valve Gp-Main Control
| 11***03 | Cone | 9 |
| 11***04 | Spring | 9 |
| 11***05 | Plug | 10 |
141-2217 Valve Gp-Main Control
| 12***29 | Cover | 1 |
| 12***30 | Valve Group-Relief | 1 |
| 12***31 | Nozzle | 1 |
132-4674 Valve Gp-Main Control
| 11***03 | Cone | 9 |
| 11***04 | Spring | 9 |
| 11***05 | Plug | 10 |
122-1822 Valve Gp-Manifold & Relief
| 10***93 | Filter Element-Oil; (Standard Efficiency) | 1 |
| 12***12 | Seal-O-Ring | 1 |
| 12***22 | Valve Group-Manifold & Relief | 1 |
137-8733 Valve Gp-Pilot
| 10***93 | Filter Element-Oil; (Standard Efficiency) | 1 |
| 12***12 | Seal-O-Ring | 1 |
| 12***53 | Valve Group-Relief | 1 |
145-4214 Valve Gp-Pilot Manifold
| 14***14 | Valve Group-Pilot Manifold | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
112-5702 Valve Gp-Pilot Manifold
| 10***93 | Filter Element-Oil; (Standard Efficiency) | 1 |
| 11***02 | Valve Group-Pilot Manifold | 1 |
| 12***12 | Seal-O-Ring | 1 |
143-0719 Valve Gp-Pilot Manifold
| 11***07 | Plug Group-Control Valve | 2 |
| 11***40 | Kit-Seal; (Priority Valve) | 1 |
| 11***80 | Ring-Backup; (11-mm Id) | 1 |
134-2776 Valve Gp-Priority
| 10***93 | Retainer | 2 |
| 11***09 | Piston-Control | 1 |
| 11***24 | Setscrew | 1 |
153-2664 Valve Gp-Priority
| 08***72 | Plug-O-Ring | 3 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***10 | Valve As | 1 |
139-8929 Valve Gp-Pump Control -Swing
| 13***29 | Valve Group-Pump Control; -Swing | 1 |
| 6V***80 | Seal-O-Ring; (20.35mm Id) | 1 |
| 8J***13 | Seal-O-Ring | 1 |
117-5784 Valve Gp-Pump Control
| 08***72 | Plug-O-Ring | 2 |
| 11***80 | Valve Group-Regulator Control | 1 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 2 |
133-4738 Valve Gp-Pump Control -Swing
| 11***99 | Plug | 1 |
| 11***00 | Piston-Control | 1 |
| 11***03 | Cover | 1 |
130-2448 Valve Gp-Pump Control
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 1 |
| 13***48 | Valve Group-Pump Control | 1 |
| 13***20 | Valve As | 1 |
126-5325 Valve Gp-Pump Control -Swing
| 12***25 | Valve Group-Pump Control; -Swing | 2 |
| 13***55 | Filter Group-Oil | 1 |
117-5780 Valve Gp-Regulator Control
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
114-0216 Valve Gp-Relief -Line
| 03***21 | Ring-Back-Up | 1 |
| 11***16 | Valve Group-Relief; -Line | 1 |
| 11***49 | Seal-O-Ring | 1 |
112-4634 Valve Gp-Relief
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 11***42 | Kit-Seal | 1 |
| 11***61 | Ring-Backup | 2 |
123-0153 Valve Gp-Relief
| 03***43 | Seal-O-Ring | 1 |
| 11***30 | Ring-Backup | 2 |
| 12***53 | Valve Group-Relief | 1 |
114-0217 Valve Gp-Relief -Line
| 11***17 | Valve Group-Relief; -Line | 1 |
| 12***93 | Plate | 1 |
| 12***94 | Bolt | 2 |
124-2939 Valve Gp-Relief
| 11***19 | Ring-Backup | 1 |
| 12***39 | Valve Group-Relief | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
120-6001 Valve Gp-Relief
| 12***01 | Valve Group-Relief | 1 |
| 12***30 | Ring | 1 |
| 5P***57 | Seal-O-Ring; (18.77mm Id) | 1 |
8u-7385 Valve Gp-Relief
| 11***74 | Kit-Seal | 1 |
| 12***96 | Piston | 1 |
| 12***97 | Ring | 1 |
120-0703 Valve Gp-Relief
| 12***03 | Valve Group-Relief | 1 |
| 12***57 | Ring | 1 |
| 12***93 | Ring | 1 |
126-5674 Valve Gp-Relief -Crossover
| 12***94 | Bolt | 2 |
| 12***96 | Washer | 2 |
| 12***97 | Spring | 2 |
124-8430 Valve Gp-Relief
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 12***30 | Valve Group-Relief | 1 |
| 12***81 | Plug | 1 |
114-0213 Valve Gp-Relief
| 11***13 | Valve Group-Relief | 1 |
| 11***70 | Kit-Seal; (Relief Valve) | 1 |
| 11***64 | Ring-Backup | 2 |
142-3952 Valve Gp-Relief
| 12***03 | Valve Group-Relief | 1 |
| 12***04 | Valve Group-Solenoid | 1 |
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 1 |
126-5675 Valve Gp-Relief -Steering High Pressure Cutoff
| 12***98 | Ball | 1 |
| 12***69 | Spring | 1 |
| 12***70 | Retainer | 1 |
145-6192 Valve Gp-Relief
| 12***84 | Block | 1 |
| 12***60 | Valve Group-Solenoid | 1 |
| 14***92 | Valve Group-Relief | 1 |
114-3073 Valve Gp-Relief
| 11***37 | Valve Group-Relief | 1 |
| 11***38 | Block-Valve | 1 |
| 11***73 | Valve Group-Relief | 1 |
113-1937 Valve Gp-Relief
| 11***37 | Valve Group-Relief | 1 |
| 11***70 | Kit-Seal; (Relief Valve) | 1 |
| 11***64 | Ring-Backup | 2 |
156-9853 Valve Gp-Solenoid
| 11***67 | Lines Group-Boom Cylinder | 1 |
| 11***22 | Cylinder & Seal Group-Stick | 1 |
| 11***24 | Boom Group-1 Piece | 1 |
112-7174 Valve Gp-Solenoid
| 11***74 | Valve Group-Solenoid | 1 |
| 12***02 | Screw | 1 |
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 2 |
123-0156 Valve Gp-Solenoid
| 12***56 | Valve Group-Solenoid | 1 |
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 2 |
| 14***57 | Plate | 1 |
139-6813 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***04 | Bolt | 4 |
| 12***06 | Ring | 4 |
112-5701 Valve Gp-Solenoid
| 11***01 | Valve Group-Solenoid | 1 |
| 12***60 | Valve Group-Solenoid | 2 |
| 8U***37 | Block | 1 |
113-7349 Valve Gp-Solenoid
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
| 11***49 | Valve Group-Solenoid | 1 |
| 12***25 | Cartridge As | 1 |
134-5809 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 12***11 | Pin-Spring | 2 |
| 13***09 | Valve Group-Solenoid | 1 |
142-5558 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 12***11 | Pin-Spring | 1 |
| 14***58 | Valve Group-Solenoid | 1 |
143-2363 Valve Gp-Solenoid
| 13***74 | Plate-Filter | 1 |
| 13***76 | Housing | 1 |
| 13***77 | Plug | 1 |
123-0155 Valve Gp-Solenoid
| 09***51 | Seal-O-Ring (Id=14.00mm) | 2 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
| 12***55 | Valve Group-Solenoid | 1 |
113-7347 Valve Gp-Solenoid
| 11***47 | Valve Group-Solenoid | 1 |
| 12***55 | Valve Group-Solenoid | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
125-1260 Valve Gp-Solenoid
| 12***04 | Valve Group-Solenoid | 1 |
| 12***60 | Valve Group-Solenoid | 1 |
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 1 |
120-0704 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***04 | Valve Group-Solenoid | 1 |
| 12***04 | Bolt | 4 |
113-7348 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 11***48 | Valve Group-Solenoid | 1 |
| 12***11 | Pin-Spring | 2 |
133-2881 Valve Gp-Swing Pump
| 11***01 | Valve & Lines Group-Auxiliary | 1 |
| 11***67 | Lines Group-Boom Cylinder | 1 |
| 11***22 | Cylinder & Seal Group-Stick | 1 |
Implements
118-5320 Boom Ar-1 Piece
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
118-5335 Boom Ar-Variable Adjustable
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
118-5324 Boom Gp-1 Piece
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 09***54 | Seal; (Id=79.85mm) | 6 |
| 11***31 | Pin | 1 |
118-5342 Boom Gp-Fore
| 09***61 | Strap; (Cable) | 13 |
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 7 |
| 11***33 | Valve Group-Lube Distribution | 1 |
118-5340 Boom Gp-Stub
| 09***61 | Strap; (Cable) | 21 |
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 7 |
| 11***32 | Valve Group-Lube Distribution | 1 |
118-5350 Lines Gp-Grease
| 11***50 | Lines Group-Grease | 1 |
| 11***07 | Linkage Group-Bucket | 1 |
| 11***12 | Cylinder & Seal Group | 1 |
118-5330 Lines Gp-Grease
| 11***30 | Lines Group-Grease | 1 |
| 11***07 | Linkage Group-Bucket | 1 |
| 11***11 | Lines Group-Diverter Valve | 1 |
118-5509 Linkage Ar-Bucket
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 3 |
| 09***42 | Seal Bkt To Stk & Link | 2 |
118-5505 Linkage Ar-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***05 | Linkage Ar-Bucket | 1 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
128-6184 Linkage Ar-Bucket
| 12***59 | Pin As | 1 |
| 12***62 | Pin | 1 |
| 12***57 | Plate | 1 |
118-5507 Linkage Gp-Bucket
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 11***35 | Pin As | 2 |
| 11***07 | Linkage Group-Bucket | 1 |
122-7014 Pin Gp-Excavator
| 10***78 | Pin | 2 |
| 12***14 | Pin Group-Excavator | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
123-4968 Pin Gp-Excavator
| 11***45 | Bracket As | 1 |
| 11***13 | Hook As-Rh | 1 |
| 11***14 | Hook As-Lh | 1 |
123-4967 Pin Gp-Excavator
| 11***39 | Bracket As | 1 |
| 12***67 | Pin Group-Excavator | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
111-1919 Restraint Gp-Travel
| 11***19 | Restraint Group-Travel | 1 |
| 11***13 | Hook As-Rh | 1 |
| 11***14 | Hook As-Lh | 1 |
111-2030 Restraint Gp-Travel
| 11***30 | Restraint Group-Travel | 1 |
| 12***07 | Blade Ar | 1 |
| 12***33 | Stabilizer Ar | 1 |
126-1575 Restraint Gp-Travel
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 11***98 | Frame As-Stabilizer | 1 |
| 11***05 | Arm As-Stabilizer | 2 |
120-0437 Stabilizer & Blade Ar
| 11***06 | Stick Group-Hoe | 1 |
| 11***10 | Lines Group-Stick | 1 |
| 12***37 | Stabilizer & Blade Ar | 1 |
122-6564 Stabilizer Gp
| 11***05 | Stick Group-Hoe | 1 |
| 11***12 | Lines Group-Stick | 1 |
| 12***64 | Stabilizer Group | 1 |
118-7493 Stick Ar
| 11***93 | Stick Ar | 1 |
| 11***24 | Lines Group-Stick | 1 |
| 11***26 | Lines Group-Stick | 1 |
118-7483 Stick Ar
| 11***83 | Stick Ar | 1 |
| 11***08 | Stick Group-Hoe | 1 |
| 11***14 | Lines Group-Stick | 1 |
118-7503 Stick Ar
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***34 | Shim; (T=69.85mm) | 6 |
118-7489 Stick Ar
| 11***89 | Stick Ar | 1 |
| 11***09 | Stick Group-Hoe | 1 |
| 12***41 | Lines Group-Stick | 1 |
118-7482 Stick Ar
| 11***07 | Stick Group-Hoe | 1 |
| 11***82 | Stick Ar | 1 |
| 11***13 | Lines Group-Stick | 1 |
118-7522 Stick Ar-Material Handling
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***34 | Shim; (T=69.85mm) | 6 |
118-7509 Stick Gp-Hoe
| 11***34 | Fitting-Straight | 1 |
| 11***09 | Stick Group-Hoe | 1 |
| 13***42 | Fitting | 11 |
118-7407 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***34 | Shim; (T=69.85mm) | 6 |
118-7508 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
118-7528 Stick Gp-Hoe
| 11***34 | Fitting-Straight | 1 |
| 11***28 | Stick Group-Hoe | 1 |
| 13***42 | Fitting | 7 |
118-7506 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***34 | Shim; (T=69.85mm) | 6 |
118-7505 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***34 | Shim; (T=69.85mm) | 6 |
117-7633 Valve Gp-Lube Distribution
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 1 |
| 10***81 | Bracket As | 1 |
117-7632 Valve Gp-Lube Distribution
| 10***65 | Shim (1.0mm Thick) | 6 |
| 10***66 | Shim (0.5mm Thick) | 4 |
| 10***67 | Plate | 1 |
Lubrication System
123-2935 Gauge Gp-Oil Level (Dipstick)
| 12***32 | Tube As | 1 |
| 12***33 | Clip | 1 |
| 12***34 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
106-8918 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***61 | Bolt; (M10x1.50x50-mm) | 1 |
| 10***15 | Bolt | 3 |
127-3295 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
Machine Arrangement
140-2835 Roading Ar -Italian
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
| 13***02 | Plate | 1 |
142-4873 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***01 | Plate | 4 |
140-2790 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***50 | Angle As | 1 |
| 13***81 | Pin As | 2 |
142-4870 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***70 | Roading Ar | 1 |
| 14***74 | Roading Ar; -Italian | 1 |
140-2252 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
140-2225 Roading Ar -Italian
| 08***60 | Washer; (5.3x25x1.6-mm Thk) | 2 |
| 09***61 | Strap; (Cable) | 1 |
| 11***27 | Lamp Group-Warning Beacon | 2 |
140-3014 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***00 | Roading Ar; -Italian | 1 |
| 14***14 | Roading Ar | 1 |
140-3015 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***35 | Roading Ar; -Italian | 1 |
| 14***15 | Roading Ar | 1 |
140-3011 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***42 | Roading Ar; -Italian | 1 |
| 14***11 | Roading Ar | 1 |
140-3013 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***99 | Roading Ar; -Italian | 1 |
| 14***13 | Roading Ar | 1 |
140-2799 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***50 | Angle As | 1 |
| 13***81 | Pin As | 2 |
142-4874 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***01 | Plate | 4 |
142-4869 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***69 | Roading Ar | 1 |
| 14***73 | Roading Ar; -Italian | 1 |
140-2800 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
140-3012 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***90 | Roading Ar; -Italian | 1 |
| 14***12 | Roading Ar | 1 |
140-3010 Roading Ar
| 14***25 | Roading Ar; -Italian | 1 |
| 14***52 | Roading Ar; -Italian | 1 |
| 14***10 | Roading Ar | 1 |
140-2642 Roading Ar -Italian
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
| 13***02 | Plate | 1 |
171-5600 Travel Ar-20km/H
| 14***17 | Valve Group-Main Control | 1 |
| 17***00 | Travel Ar-20km/H | 1 |
Operator Station
130-0412 Accumulator Gp-Refrigerant
| 13***12 | Accumulator Group-Refrigerant | 1 |
| 13***78 | Console | 1 |
| 13***79 | Plate-Plastic | 1 |
121-2447 Accumulator Gp-Refrigerant
| 12***47 | Accumulator Group-Refrigerant | 1 |
| 13***68 | Nut | 1 |
| 13***75 | Air Compressor Group-Seat | 1 |
131-2875 Air Compressor Gp-Seat
| 09***61 | Strap; (Cable) | 1 |
| 11***60 | Condenser Group-Refrigerant | 1 |
| 12***43 | Hose As | 1 |
122-4743 Air Compressor Gp-Seat
| 11***91 | Bracket | 1 |
| 11***92 | Bracket | 1 |
| 11***60 | Condenser Group-Refrigerant | 1 |
126-3476 Air Conditioner Ar
| 09***61 | Strap; (Cable) | 1 |
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 1 |
| 11***61 | Plate-Instruction; (Air Conditioner Lines) | 1 |
137-4187 Air Conditioner Ar
| 09***61 | Strap; (Cable) | 1 |
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
132-6233 Air Conditioner Gp
| 13***33 | Air Conditioner Group | 1 |
| 13***17 | Fastener-Upper | 1 |
| 13***18 | Fastener-Lower | 1 |
118-1874 Blind Gp-Cab
| 11***74 | Blind Group-Cab | 1 |
| 12***73 | Resistor | 1 |
120-5380 Blind Gp-Cab
| 12***80 | Blind Group-Cab | 1 |
| 12***94 | Guard-Fan | 1 |
118-1873 Blind Gp-Cab
| 11***73 | Blind Group-Cab | 1 |
| 12***76 | Rivet | 2 |
| 13***14 | Bracket | 2 |
122-2372 Blower Gp-Cab
| 12***72 | Blower Group-Cab | 1 |
| 12***76 | Rivet | 8 |
| 12***86 | Insert | 1 |
122-2375 Blower Gp-Refrig Condenser
| 09***61 | Strap; (Cable) | 1 |
| 12***75 | Blower Group-Refrig Condenser | 1 |
| 12***32 | Cab Group | 1 |
122-5771 Box As-Storage
| 09***61 | Strap; (Cable) | 1 |
| 12***32 | Cab Group | 1 |
| 12***36 | Hatch Group-Roof | 1 |
111-1906 Cab Ar
| 09***61 | Strap; (Cable) | 1 |
| 11***06 | Cab Ar | 1 |
| 12***32 | Cab Group | 1 |
146-6177 Cab Ar
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 10***03 | Ring (Rubber) | 4 |
| 11***25 | Seal; (89.5 cm) | 0 |
118-1871 Cab Ar
| 09***71 | Washer-Spring | 4 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***71 | Cab Ar | 1 |
111-1913 Cab Ar
| 09***61 | Strap; (Cable) | 1 |
| 11***13 | Cab Ar | 1 |
| 12***32 | Cab Group | 1 |
122-4732 Cab Gp
| 10***59 | Compressor Group-Refrigerant | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***32 | Cab Group | 1 |
3e-1906 Compressor Gp-Refrigerant
| 12***75 | Blower Group-Refrig Condenser | 1 |
| 12***18 | Condenser As | 1 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 12***75 | Screw | 2 |
| 12***18 | Condenser As | 1 |
119-8060 Condenser Gp-Refrigerant
| 11***60 | Condenser Group-Refrigerant | 1 |
| 7W***69 | Adapter; (Lubricating Oil Cooler) | 2 |
145-7723 Condenser Gp-Refrigerant
| 12***44 | Cover | 1 |
| 12***45 | Body | 1 |
| 12***46 | Lever | 1 |
121-3417 Connector Gp-Cab Heater Lines
| 12***17 | Connector Group-Cab Heater Lines | 1 |
| 12***53 | Panel; (Lh) | 1 |
| 12***54 | Panel; (Rh) | 1 |
111-2026 Console Gp-Operator
| 08***66 | Locknut; (M8x1.25-Thd) | 1 |
| 11***26 | Console Group-Operator | 1 |
| 12***82 | Button | 4 |
111-2025 Console Gp-Operator
| 11***25 | Console Group-Operator | 1 |
| 12***31 | Control Group-Air & Temperature | 1 |
| 12***32 | Cable As | 1 |
126-6031 Control Gp-Air & Temperature
| 11***66 | Bracket | 1 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
127-8031 Control Gp-Air & Temperature
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***19 | Setscrew | 1 |
| 11***32 | Boot | 1 |
112-5699 Control Gp-Hydraulic Pedal -Travel
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
| 11***31 | Control Group-Joystick | 1 |
| 12***52 | Kit-Cap | 1 |
112-5704 Control Gp-Hydraulic Pedal
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 13***72 | Plate As | 1 |
| 5W***19 | Washer; (9.8x18.5x1.5-mm Thk)(9.8x18.5x1.5-mm Thk) | 8 |
111-1939 Control Gp-Hydraulic Pedal
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***39 | Control Group-Hydraulic Pedal | 1 |
| 11***19 | Setscrew | 1 |
111-2029 Control Gp-Joystick
| 11***29 | Control Group-Joystick | 1 |
| 13***71 | Plate As | 1 |
| 5W***19 | Washer; (9.8x18.5x1.5-mm Thk)(9.8x18.5x1.5-mm Thk) | 8 |
125-4902 Cover Gp-Cab Riser
| 12***76 | Rivet | 3 |
| 12***77 | Bracket | 1 |
| 12***78 | Cover-Wiper Motor | 1 |
125-4903 Cover Gp-Cab Riser
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
122-5756 Cover Gp-Wiper Motor
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
146-9563 Door Gp-Cab
| 11***22 | Screw-Pan Head | 8 |
| 14***80 | Plate As-Box | 1 |
| 14***85 | Plate-Bottom | 1 |
131-2561 Door Gp-Cab
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
131-2562 Door Gp-Cab
| 13***62 | Door Group-Cab | 1 |
| 15***63 | Screen Group-Radiator | 1 |
| 15***07 | Filter Group-Cab Air | 1 |
131-0932 Door Gp-Cab
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
156-9017 Filter Ar-Air
| 12***38 | Handle | 1 |
| 12***39 | Cam | 1 |
| 12***40 | Plate-Cover | 1 |
156-7407 Filter Gp-Cab Air
| 12***29 | Plate | 1 |
| 15***07 | Filter Group-Cab Air | 1 |
| 5W***31 | Ring-Retaining | 1 |
130-6598 Frame Gp-Seat
| 11***31 | Guard As-Cab | 1 |
| 13***98 | Frame Group-Seat | 1 |
| 13***63 | Seal-Ring | 4 |
124-9628 Frame Gp-Seat
| 12***28 | Frame Group-Seat | 1 |
| 12***29 | Plate | 1 |
| 5W***31 | Ring-Retaining | 1 |
111-1903 Frame Gp-Seat
| 11***03 | Frame Group-Seat | 1 |
| 12***44 | Hose | 1 |
| 12***38 | Handle | 1 |
130-6945 Frame Gp-Seat
| 09***76 | Nut; (M14x2-Thd) | 2 |
| 09***59 | Bolt; (M14x2x60-mm) | 2 |
| 11***35 | Guard Group-Overhead | 1 |
111-1936 Guard Gp-Overhead
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***36 | Guard Group-Overhead | 1 |
| 12***54 | Screw | 4 |
111-1935 Guard Gp-Overhead
| 11***35 | Guard Group-Overhead | 1 |
| 11***22 | Seal; (22 cm)(400cm) | 0 |
| 13***00 | Rivet | 3 |
111-1937 Guard Gp-Vandalism
| 11***37 | Guard Group-Vandalism | 1 |
| 5W***69 | Guide | 2 |
122-4736 Hatch Gp-Roof
| 12***05 | Bolt; (M4x0.7x12-mm) | 3 |
| 12***72 | Blower Group-Cab | 1 |
| 12***36 | Hatch Group-Roof | 1 |
111-1942 Headrest As-Seat
| 09***92 | Clamp, Hose | 4 |
| 11***42 | Headrest As-Seat | 1 |
| 11***22 | Heater Group-Cab | 1 |
117-7961 Heater Gp-Cab
| 09***55 | Washer, Tooth | 8 |
| 11***61 | Heater Group-Cab | 1 |
| 12***05 | Bolt; (M4x0.7x12-mm) | 3 |
123-9716 Heater Gp-Cab
| 12***16 | Heater Group-Cab | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
| 5P***92 | Hose 4.13 M(162.5 In.); 200.0mm(7.88in) Lg | 2 |
111-2022 Heater Gp-Cab
| 09***92 | Clamp, Hose | 4 |
| 11***22 | Heater Group-Cab | 1 |
| 11***30 | Grommet-Rubber | 1 |
132-6234 Heater Gp-Cab
| 12***37 | Bracket | 1 |
| 13***34 | Heater Group-Cab | 1 |
| 2Y***81 | Lockwasher | 2 |
111-1930 Horn Gp-Air
| 10***87 | Bolt; (M5x0.8x12-mm) | 2 |
| 11***30 | Horn Group-Air | 1 |
| 5W***37 | Mount-Speaker | 2 |
5w-5860 Horn Gp-Air
| 15***59 | Horn As | 1 |
| 5W***60 | Horn Group-Air | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
111-1851 Horn Gp-Electric
| 11***51 | Horn Group-Electric | 1 |
| 11***05 | Switch Group; (Blower Fan Speed) | 1 |
| 11***07 | Cover | 1 |
126-7829 Installation Gp-Radio
| 11***03 | Plate-Fan | 1 |
| 11***05 | Switch Group; (Blower Fan Speed) | 1 |
| 11***81 | Cover | 1 |
117-7960 Instrument Gp
| 11***03 | Plate-Fan | 1 |
| 11***05 | Switch Group; (Blower Fan Speed) | 1 |
| 11***81 | Cover | 1 |
122-5781 Liner Gp-Cab
| 12***81 | Liner Group-Cab | 1 |
| 12***81 | Pipe | 2 |
| 13***54 | Clamp-Double | 1 |
133-8054 Lines Gp-Air Conditioner
| 12***54 | Screw | 1 |
| 13***54 | Lines Group-Air Conditioner | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
133-5387 Lines Gp-Heater
| 12***94 | Plug | 1 |
| 13***87 | Lines Group-Heater | 1 |
| 16***44 | Rod As | 1 |
5w-1128 Mirror Gp
| 14***58 | Glass | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
| 5W***28 | Mirror Group | 1 |
111-1922 Mirror Gp
| 11***22 | Mirror Group | 1 |
| 12***54 | Screw | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
139-1428 Mirror Gp
| 12***54 | Mirror Group-Rear View | 1 |
| 12***94 | Plug | 1 |
| 13***28 | Mirror Group | 1 |
120-6954 Mirror Gp-Rear View
| 12***54 | Mirror Group-Rear View | 1 |
| 12***24 | Switch Group-Resistor | 1 |
| 12***83 | Screw-Pan Head | 5 |
145-3178 Mirror Gp-Rear View
| 12***24 | Switch Group-Resistor | 1 |
| 12***83 | Screw-Pan Head | 5 |
| 13***97 | Monitor As-Panel | 1 |
5w-4663 Mirror Gp-Rear View
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 12***54 | Screw | 1 |
| 5W***63 | Mirror Group-Rear View | 1 |
111-1859 Mirror Gp-Rear View
| 09***68 | Grommet | 1 |
| 11***59 | Mirror Group-Rear View | 1 |
| 12***94 | Plug | 1 |
143-6855 Monitor Gp-Operator
| 11***21 | Seal; (85-cm Each) | 0 |
| 13***24 | Screw-Flat Head | 1 |
| 14***55 | Monitor Group-Operator | 1 |
148-7927 Monitor Gp-Operator
| 11***98 | Steering Column Group | 1 |
| 11***00 | Platform Group-Operator | 1 |
| 11***01 | Control Group-Brake | 1 |
141-8440 Monitor Gp-Operator
| 12***83 | Screw-Pan Head | 5 |
| 13***97 | Monitor As-Panel | 1 |
| 13***98 | Lamp As | 19 |
131-5196 Monitor Gp-Operator
| 12***83 | Screw-Pan Head | 5 |
| 13***96 | Monitor Group-Operator | 1 |
| 13***97 | Monitor As-Panel | 1 |
111-1905 Mounting Gp-Cab
| 09***16 | Ring-Retaining | 1 |
| 09***23 | Ring-Retaining; (External) | 2 |
| 11***05 | Mounting Group-Cab | 1 |
117-7958 Operator Ar
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 11***78 | Pin As | 1 |
| 11***00 | Platform As | 1 |
111-2017 Pedal Gp
| 11***17 | Pedal Group | 1 |
| 11***53 | Bracket As | 2 |
| 12***82 | Platform As | 1 |
132-6738 Platform Gp-Operator
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 11***78 | Pin As | 1 |
| 11***53 | Bracket As | 2 |
134-6389 Platform Gp-Operator
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 12***69 | Switch; (Upper Windshield) | 1 |
| 12***08 | Rail As-Lower | 1 |
111-1900 Platform Gp-Operator
| 11***00 | Platform Group-Operator | 1 |
| 11***53 | Bracket As | 2 |
| 13***46 | Plate | 1 |
120-5701 Radio Gp
| 12***01 | Radio Group | 1 |
| 13***37 | Riser Group-Cab | 1 |
| 13***38 | Platform Group-Operator | 1 |
122-5773 Rail Gp
| 12***73 | Rail Group | 1 |
| 12***76 | Plate | 1 |
| 12***61 | Step As | 1 |
134-3727 Riser Ar-Cab
| 12***76 | Plate | 1 |
| 12***61 | Step As | 1 |
| 12***02 | Cover Group-Cab Riser | 1 |
132-6737 Riser Gp-Cab
| 12***79 | Screw | 1 |
| 12***80 | Washer | 1 |
| 12***81 | Washer | 2 |
135-3504 Seat Belt Gp
| 08***66 | Locknut; (M8x1.25-Thd) | 6 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***03 | Frame Group-Seat | 1 |
8y-4031 Seat Belt Gp -Adjustable, 3-In
| 8Y***31 | Seat Belt Group | 2 |
111-1912 Seat Belt Gp
| 11***02 | Seat Group-Suspension | 1 |
| 11***12 | Seat Belt Group | 1 |
| 11***93 | Hose | 2 |
115-9139 Seat Gp
| 11***39 | Seat Group | 1 |
| 12***42 | Seat Group-Suspension | 1 |
| 12***43 | Air Compressor Group-Seat | 1 |
117-0664 Seat Gp-Suspension
| 08***66 | Locknut; (M8x1.25-Thd) | 2 |
| 11***64 | Seat Group-Suspension | 1 |
| 11***58 | Spacer | 1 |
111-1902 Seat Gp-Suspension
| 08***66 | Locknut; (M8x1.25-Thd) | 4 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***02 | Seat Group-Suspension | 1 |
122-4742 Seat Gp-Suspension
| 08***66 | Locknut; (M8x1.25-Thd) | 2 |
| 12***42 | Seat Group-Suspension | 1 |
| 13***48 | Spring As-Air | 1 |
130-6595 Support Gp-Seat
| 12***25 | Rail-Guide | 1 |
| 12***26 | Rail-Guide | 1 |
| 12***27 | Lever | 1 |
111-2028 Support Gp-Seat
| 08***66 | Locknut; (M8x1.25-Thd) | 4 |
| 11***28 | Support Group-Seat | 1 |
| 12***71 | Arm As | 1 |
111-2027 Suspension Gp-Seat
| 09***71 | Washer-Spring | 2 |
| 09***66 | Bolt; (M8x1.25x75-mm) | 1 |
| 11***27 | Suspension Group-Seat | 1 |
8u-7008 Suspension Gp-Seat
| 12***36 | Support; (Lh) | 1 |
| 12***37 | Support; (Rh) | 1 |
| 12***34 | Clamp; (16.5 cm Each) | 0 |
188-0464 Visor Gp-Cab
| 12***54 | Screw | 2 |
| 12***55 | Screw | 2 |
| 12***56 | Bar; (41 cm) | 0 |
111-1932 Visor Gp-Cab
| 11***32 | Visor Group-Cab | 1 |
| 12***25 | Tank | 1 |
| 12***26 | Holder | 1 |
122-5758 Visor Gp-Cab
| 12***58 | Visor Group-Cab | 1 |
| 12***54 | Screw | 2 |
| 12***55 | Screw | 2 |
8u-2598 Washer Gp-Window
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***09 | Window-Front; (Lower) | 1 |
| 12***12 | Plate | 2 |
123-6515 Window Gp-Door
| 12***10 | Adhesive | 1 |
| 12***21 | Window-Front; (Upper) (Glass) | 1 |
| 12***22 | Strap; (20cm) | 0 |
146-9562 Window Gp-Door
| 09***61 | Strap; (Cable) | 0 |
| 11***53 | Screw; (M6x1x16-mm) | 2 |
| 12***61 | Bracket | 1 |
122-5774 Window Gp-Front -Lower
| 09***61 | Strap; (Cable) | 5 |
| 11***53 | Screw; (M6x1x16-mm) | 3 |
| 12***62 | Blade As-Wiper; (400-mm) | 1 |
122-5776 Window Gp-Front -Upper
| 12***67 | Motor Group-Window Wiper | 1 |
| 12***07 | Washer | 1 |
| 12***23 | Washer | 1 |
131-1764 Wiper & Washer Gp-Window
| 10***62 | Film-Instruction; (Washer Fluid) | 2 |
| 11***43 | Film-Warning; (Lifting) | 2 |
| 11***48 | Film-Instruction; (Parking Brake) | 1 |
122-0372 Wiper & Washer Gp-Window
| 10***09 | Film; (Environmental Decal)(Both Sides Under 966f Ii Film) | 2 |
| 12***72 | Wiper & Washer Group-Window | 1 |
122-5779 Wiper Gp-Window
| 10***26 | Plate-Pictograph | 4 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 11***60 | Film-Warning; (Engine)(German) | 1 |
Power Train
118-1879 Axle & Mtg Ar-Front
| 11***70 | Pin | 1 |
| 11***30 | Plate As | 2 |
| 11***79 | Axle & Mtg Ar-Front | 1 |
111-1883 Axle & Mtg Ar-Front
| 11***70 | Pin | 1 |
| 11***30 | Plate As | 2 |
| 11***83 | Axle & Mtg Ar-Front | 1 |
129-3158 Axle & Mtg Ar-Rear
| 12***24 | Cap | 2 |
| 12***15 | Fitting As; (Quick Disconnect) | 2 |
| 12***71 | Axle & Transmission Ar | 1 |
111-1884 Axle & Mtg Ar-Rear
| 11***84 | Axle & Mtg Rear Axle | 1 |
| 11***76 | Axle & Transmission Ar | 1 |
| 12***24 | Cap | 2 |
118-1880 Axle & Mtg Ar-Rear
| 11***80 | Axle & Mtg Rear Axle | 1 |
| 12***24 | Cap | 2 |
| 12***15 | Fitting As; (Quick Disconnect) | 2 |
112-4976 Axle & Transmission Ar
| 11***85 | Transmission Ar | 1 |
| 11***76 | Axle & Transmission Ar | 1 |
| 11***39 | Axle Rear Axle | 1 |
129-2671 Axle & Transmission Ar
| 11***85 | Transmission Ar | 1 |
| 12***71 | Axle & Transmission Ar | 1 |
| 12***74 | Axle Rear Axle | 1 |
129-2670 Axle & Transmission Ar
| 11***85 | Transmission Ar | 1 |
| 12***70 | Axle & Transmission Ar | 1 |
| 12***72 | Axle Rear Axle | 1 |
112-4533 Axle Ar-Front
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
121-4435 Axle Ar-Front
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
129-2674 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
112-5439 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
129-2672 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
118-1878 Axle Ar-Wide
| 11***78 | Axle Ar-Wide | 1 |
| 11***79 | Axle & Mtg Ar-Front | 1 |
| 11***80 | Axle & Mtg Rear Axle | 1 |
129-2721 Brake Gp-Drum
| 12***21 | Brake Group-Drum | 1 |
| 12***35 | Support As | 1 |
| 12***37 | Cylinder | 1 |
158-6333 Brake Gp-Drum
| 12***50 | Shoe-Brake | 2 |
| 12***51 | Bolt | 2 |
| 12***52 | Plate | 1 |
8u-6727 Ring Gp-Tire
| 8U***27 | Ring Group-Tire | 1 |
| 8U***28 | Ring-Tire | 4 |
8u-6723 Ring Gp-Tire
| 32***49 | Ring-Tire | 4 |
| 8U***23 | Ring Group-Tire | 1 |
8u-6725 Ring Gp-Tire
| 8U***24 | Ring-Tire | 4 |
| 8U***25 | Ring Group-Tire | 1 |
121-3968 Shaft Gp-Drive
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 11***15 | Universal Joint Group | 1 |
| 11***42 | Bolt; (M10x1x35-mm) | 16 |
120-0298 Shaft Gp-Drive
| 11***45 | Nut; (M10x1.0-Thd) | 16 |
| 12***98 | Shaft Group-Drive | 1 |
| 12***38 | Universal Joint Group | 1 |
110-6135 Shaft Gp-Drive -Carrier Bearing
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 5W***13 | Housing-Parking Brake | 1 |
| 5W***16 | Shaft | 1 |
113-1866 Tire & Rim Ar
| 11***04 | Tire & Rim Group | 8 |
| 11***66 | Tire & Rim Ar | 1 |
| 22***74 | Extension As-Air | 4 |
125-9671 Tire & Rim Ar
| 12***71 | Tire & Rim Ar | 1 |
| 12***72 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-2001 Tire & Rim Ar
| 11***01 | Tire & Rim Ar | 1 |
| 11***09 | Tire & Rim Group | 4 |
111-1999 Tire & Rim Ar
| 11***99 | Tire & Rim Ar | 1 |
| 11***07 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-2003 Tire & Rim Ar
| 11***03 | Tire & Rim Ar | 1 |
| 11***11 | Tire & Rim Group | 8 |
111-2000 Tire & Rim Ar
| 11***00 | Tire & Rim Ar | 1 |
| 11***08 | Tire & Rim Group | 8 |
| 5W***47 | Clamp | 4 |
123-3879 Tire & Rim Ar
| 12***79 | Tire & Rim Ar | 1 |
| 12***10 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-1998 Tire & Rim Ar
| 11***98 | Tire & Rim Ar | 1 |
| 11***06 | Tire & Rim Group | 8 |
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
111-1997 Tire & Rim Ar
| 11***97 | Tire & Rim Ar | 1 |
| 11***05 | Tire & Rim Group | 8 |
| 5W***47 | Clamp | 4 |
125-5343 Tire & Rim Ar
| 12***43 | Tire & Rim Ar | 1 |
| 12***47 | Tire & Rim Group | 8 |
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
125-9674 Tire & Rim Ar
| 12***74 | Tire & Rim Ar | 1 |
| 12***75 | Tire & Rim Group | 8 |
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
125-5347 Tire & Rim Gp
| 12***47 | Tire & Rim Group | 1 |
| 12***36 | Tire; (11.00-20)(Procure Locally) | 1 |
| 5W***37 | Rim As-Wheel | 1 |
111-2004 Tire & Rim Gp
| 11***04 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2006 Tire & Rim Gp
| 11***06 | Tire & Rim Group | 1 |
| 5W***37 | Rim As-Wheel | 1 |
| 5W***40 | Tube-Tire; (Procure Locally) | 1 |
111-2009 Tire & Rim Gp
| 11***09 | Tire & Rim Group | 1 |
| 15***62 | Rim As-Wheel | 1 |
| 5W***36 | Tire-18r-19,5 Xf | 1 |
125-9675 Tire & Rim Gp
| 12***75 | Tire & Rim Group | 1 |
| 12***55 | Tire; (11-20) | 1 |
| 5W***37 | Rim As-Wheel | 1 |
111-2008 Tire & Rim Gp
| 11***08 | Tire & Rim Group | 1 |
| 11***84 | Tire; (10.00 X 20-16 Ply) | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2011 Tire & Rim Gp
| 11***11 | Tire & Rim Group | 1 |
| 24***71 | Rim As | 1 |
| 5W***52 | Tire-Solid; (10-20) | 1 |
125-9672 Tire & Rim Gp
| 12***72 | Tire & Rim Group | 1 |
| 12***56 | Tire; (10-20) | 1 |
| 22***75 | Rim As | 1 |
111-2007 Tire & Rim Gp
| 11***07 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2005 Tire & Rim Gp
| 11***05 | Tire & Rim Group | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
| 5W***21 | Tube-Tire; (Procure Locally) | 1 |
124-2910 Tire & Rim Gp
| 12***10 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-1885 Transmission Ar
| 09***19 | Ring-Retaining | 1 |
| 09***34 | Ring-Retaining; (Internal) | 1 |
| 09***42 | Ring-Retaining | 1 |
121-5938 Universal Joint Gp
| 12***38 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
121-5940 Universal Joint Gp
| 12***40 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
121-7657 Universal Joint Gp
| 12***47 | Universal Joint As | 1 |
| 12***48 | Universal Joint | 1 |
| 12***57 | Universal Joint Group | 1 |
112-5015 Universal Joint Gp
| 11***15 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
116-5478 Wedge Gp-Wheel
| 11***78 | Wedge Group-Wheel | 1 |
| 26***64 | Wedge | 1 |
| 26***70 | Bracket | 1 |
Service Equipment And Supplies
148-7041 Film Gp -Environmental
| 11***64 | Film-Warning | 1 |
| 11***38 | Film-Instruction | 1 |
| 11***54 | Film-Instruction | 1 |
118-6208 Plate & Film Gp
| 11***62 | Film-Warning | 1 |
| 11***36 | Film-Instruction | 1 |
| 11***52 | Film-Instruction | 1 |
118-6212 Plate & Film Gp
| 10***47 | Film-Warning; (Engine Speed Control) | 1 |
| 10***89 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 11***12 | Plate & Film Group | 1 |
118-6202 Plate & Film Gp
| 11***67 | Film-Warning | 1 |
| 11***41 | Film-Instruction | 1 |
| 11***57 | Film-Instruction | 1 |
127-9896 Plate & Film Gp
| 12***96 | Plate & Film Group | 1 |
118-6200 Plate & Film Gp
| 11***66 | Film-Warning | 1 |
| 11***40 | Film-Instruction | 1 |
| 11***56 | Film-Instruction | 1 |
122-7265 Plate & Film Gp
| 11***42 | Film-Warning; (Battery/Jump Start) | 1 |
| 11***45 | Film-Instruction; (Operator Controls) | 1 |
| 11***50 | Film-Instruction; (Refueling Pump) | 1 |
118-6214 Plate & Film Gp
| 10***48 | Film-Warning; (Engine Speed Control) | 1 |
| 10***90 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 11***14 | Plate & Film Group | 1 |
122-7266 Plate & Film Gp
| 12***66 | Plate & Film Group | 1 |
118-6206 Plate & Film Gp
| 11***61 | Film-Warning | 1 |
| 11***35 | Film-Instruction | 1 |
| 11***51 | Film-Instruction | 1 |
136-3815 Plate & Film Gp
| 13***15 | Plate & Film Group | 1 |
118-6204 Plate & Film Gp
| 11***63 | Film-Warning | 1 |
| 11***37 | Film-Instruction | 1 |
| 11***53 | Film-Instruction | 1 |
118-6210 Plate & Film Gp
| 10***69 | Plate-Warning; (Read Omm) | 1 |
| 10***63 | Film-Warning; (Engine Speed Control) | 1 |
| 11***10 | Plate & Film Group | 1 |
117-7982 Plate & Film Gp
| 11***65 | Film-Warning | 1 |
| 11***39 | Film-Instruction | 1 |
| 11***55 | Film-Instruction | 1 |
Undercarriage
111-1895 Drawbar Gp
| 11***95 | Drawbar Group | 1 |
| 11***39 | Bracket | 1 |
| 5W***85 | Bracket Group-Drawbar | 1 |
120-0296 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***67 | Bracket | 2 |
118-5514 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***50 | Guard As | 1 |
Work Tools
106-6757 Adjuster Gp-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***08 | Lines Group-Blade Cylinder | 1 |
| 12***09 | Cylinder Group-Blade | 2 |
120-0410 Blade & Mounting Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***10 | Blade & Mounting Group | 1 |
| 12***42 | Bucket As-Excavation | 1 |
120-0407 Blade Ar
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***07 | Blade Ar | 1 |
| 12***43 | Bucket As-Excavation | 1 |
128-5803 Bucket & Adjuster Ar -Ditch Cleaning
| 12***53 | Bucket As-Ditch Cleaning | 1 |
| 12***03 | Bucket & Adjuster Ar; -Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
122-6989 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***42 | Bucket As-Excavation | 1 |
| 12***89 | Bucket & Adjuster Group | 1 |
122-6993 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***37 | Bucket As-Excavation | 1 |
| 12***93 | Bucket & Adjuster Group | 1 |
122-6998 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***98 | Bucket & Adjuster Group | 1 |
| 12***26 | Bucket As-Ditch Cleaning | 1 |
128-5804 Bucket & Adjuster Gp -Ditch Cleaning
| 12***54 | Bucket As-Ditch Cleaning | 1 |
| 12***04 | Bucket & Adjuster Group; -Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
122-6990 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***49 | Bucket As-Excavation | 1 |
| 12***90 | Bucket & Adjuster Group | 1 |
122-6985 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***45 | Bucket As-Excavation | 1 |
| 12***85 | Bucket & Adjuster Group | 1 |
122-6984 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***44 | Bucket As-Excavation | 1 |
| 12***84 | Bucket & Adjuster Group | 1 |
122-6988 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***48 | Bucket As-Excavation | 1 |
| 12***88 | Bucket & Adjuster Group | 1 |
122-6992 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 12***92 | Bucket & Adjuster Group | 1 |
122-6995 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***35 | Bucket As-Excavation | 1 |
| 12***95 | Bucket & Adjuster Group | 1 |
122-6996 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 12***96 | Bucket & Adjuster Group | 1 |
122-6997 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***97 | Bucket & Adjuster Group | 1 |
| 12***25 | Bucket As-Ditch Cleaning | 1 |
122-6986 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***46 | Bucket As-Excavation | 1 |
| 12***86 | Bucket & Adjuster Group | 1 |
122-6987 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***47 | Bucket As-Excavation | 1 |
| 12***87 | Bucket & Adjuster Group | 1 |
121-5556 Bucket As-Ditch Cleaning
| 12***56 | Bucket As-Ditch Cleaning | 1 |
| 12***85 | Edge-Cutting | 1 |
| 12***89 | Plate-Lh | 1 |
116-6011 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
121-5580 Bucket As-Ditch Cleaning
| 12***57 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
| 12***80 | Bucket As-Ditch Cleaning | 1 |
127-8025 Bucket As-Ditch Cleaning
| 11***86 | Edge | 1 |
| 12***30 | Edge As | 1 |
| 12***25 | Bucket As-Ditch Cleaning | 1 |
127-8026 Bucket As-Ditch Cleaning
| 11***88 | Edge | 1 |
| 12***31 | Edge As | 1 |
| 12***26 | Bucket As-Ditch Cleaning | 1 |
121-5553 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 12***53 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
121-5554 Bucket As-Ditch Cleaning
| 12***54 | Bucket As-Ditch Cleaning | 1 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
121-5557 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
121-5555 Bucket As-Ditch Cleaning
| 11***22 | Plate-Wear | 6 |
| 12***55 | Bucket As-Ditch Cleaning | 1 |
| 12***85 | Edge-Cutting | 1 |
110-6738 Bucket As-Excavation
| 11***38 | Bucket As-Excavation | 1 |
| 11***90 | Edge | 1 |
| 12***36 | Edge As | 1 |
116-3904 Bucket As-Excavation
| 11***98 | Edge As | 1 |
| 11***04 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 5 |
122-2145 Bucket As-Excavation
| 11***90 | Edge | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***45 | Bucket As-Excavation | 1 |
120-4435 Bucket As-Excavation
| 12***35 | Bucket As-Excavation | 1 |
| 12***32 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 4 |
116-3903 Bucket As-Excavation
| 11***03 | Bucket As-Excavation | 1 |
| 12***32 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 4 |
116-4754 Bucket As-Excavation
| 11***54 | Bucket As-Excavation | 1 |
| 12***36 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 6 |
122-2147 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***47 | Bucket As-Excavation | 1 |
| 14***83 | Edge As | 1 |
116-4753 Bucket As-Excavation
| 11***90 | Edge | 1 |
| 11***53 | Bucket As-Excavation | 1 |
| 12***36 | Edge As | 1 |
122-2149 Bucket As-Excavation
| 12***49 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 4K***45 | Plate | 2 |
116-6642 Bucket As-Excavation
| 11***42 | Bucket As-Excavation | 1 |
| 12***50 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 5 |
122-2144 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 12***44 | Bucket As-Excavation | 1 |
| 14***81 | Edge As | 1 |
112-3712 Bucket As-Excavation
| 11***12 | Bucket As-Excavation | 1 |
| 11***89 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 3 |
116-3910 Bucket As-Excavation
| 11***10 | Bucket As-Excavation | 1 |
| 11***13 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 4 |
122-2148 Bucket As-Excavation
| 12***48 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 3 |
112-3713 Bucket As-Excavation
| 11***13 | Bucket As-Excavation | 1 |
| 11***89 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 3 |
122-2146 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***46 | Bucket As-Excavation | 1 |
| 14***83 | Edge As | 1 |
116-3906 Bucket As-Excavation
| 11***96 | Edge As | 1 |
| 11***06 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 5 |
122-2236 Bucket As-Excavation
| 11***96 | Edge As | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 5 |
116-3911 Bucket As-Excavation
| 11***11 | Bucket As-Excavation | 1 |
| 11***14 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 4 |
122-2143 Bucket As-Excavation
| 11***97 | Edge | 1 |
| 12***43 | Bucket As-Excavation | 1 |
| 12***34 | Edge As | 1 |
122-0184 Bucket As-Excavation
| 12***84 | Bucket As-Excavation | 1 |
| 12***30 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 3 |
110-6731 Bucket As-Excavation
| 11***31 | Bucket As-Excavation | 1 |
| 11***87 | Edge | 1 |
| 12***38 | Edge As | 1 |
116-3905 Bucket As-Excavation
| 11***98 | Edge As | 1 |
| 11***05 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 5 |
120-4436 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 12***36 | Bucket As-Excavation | 1 |
| 14***81 | Edge As | 1 |
122-0185 Bucket As-Excavation
| 11***88 | Edge | 1 |
| 12***85 | Bucket As-Excavation | 1 |
| 12***31 | Edge As | 1 |
116-4755 Bucket As-Excavation
| 11***55 | Bucket As-Excavation | 1 |
| 13***16 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 4 |
110-6875 Bucket As-Excavation
| 11***75 | Bucket As-Excavation | 1 |
| 11***90 | Edge | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
122-2237 Bucket As-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***09 | Bucket As-Extreme Excavation; -Quick Coupler | 1 |
116-3908 Bucket As-Excavation
| 11***88 | Edge As | 1 |
| 11***08 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 6 |
116-3902 Bucket As-Excavation
| 11***02 | Edge As | 1 |
| 11***02 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 4 |
122-2142 Bucket As-Excavation
| 11***01 | Edge | 1 |
| 12***42 | Bucket As-Excavation | 1 |
| 12***32 | Edge As | 1 |
110-6877 Bucket As-Excavation
| 11***77 | Bucket As-Excavation | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 14***83 | Edge As | 1 |
122-2234 Bucket As-Excavation
| 12***45 | Edge As | 1 |
| 12***34 | Bucket As-Excavation | 1 |
| 4K***45 | Plate | 2 |
110-6732 Bucket As-Excavation
| 11***32 | Bucket As-Excavation | 1 |
| 11***97 | Edge | 1 |
| 12***34 | Edge As | 1 |
116-3907 Bucket As-Excavation
| 11***91 | Edge As | 1 |
| 11***07 | Bucket As-Excavation | 1 |
| 6Y***54 | Adapter-Strap | 6 |
121-9809 Bucket As-Excavation
| 12***50 | Edge As | 1 |
| 12***09 | Bucket As-Excavation | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 5 |
121-9808 Bucket As-Excavation
| 12***08 | Bucket As-Excavation | 1 |
| 13***16 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 4 |
122-2233 Bucket As-Excavation
| 12***33 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 3 |
116-4720 Bucket As-Extreme Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***03 | Bucket As-Excavation | 1 |
116-3909 Bucket As-Extreme Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***02 | Bucket As-Excavation | 1 |
5w-0605 Bucket & Bearing As -Ditch Cleaning
| 11***22 | Plate-Wear | 6 |
| 5W***05 | Bucket As.-Ditch Clng; -Ditch Cleaning | 1 |
| 5W***55 | Edge-Cutting | 1 |
5w-0604 Bucket & Bearing As -Ditch Cleaning
| 12***80 | Bucket As-Ditch Cleaning | 1 |
| 5W***04 | Bucket As.-Ditch Clng; -Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
116-4721 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 11***49 | Plate | 2 |
| 11***21 | Bucket Group-Excavation | 1 |
116-4717 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***08 | Bucket As-Excavation | 1 |
116-4715 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***06 | Bucket As-Excavation | 1 |
116-4758 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 11***49 | Plate | 2 |
| 11***00 | Hinge | 2 |
116-4716 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***07 | Bucket As-Excavation | 1 |
116-4714 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***05 | Bucket As-Excavation | 1 |
116-4719 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***11 | Bucket As-Excavation | 1 |
116-4718 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***10 | Bucket As-Excavation | 1 |
116-4713 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 3 |
| 11***04 | Bucket As-Excavation | 1 |
116-4722 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 11***49 | Plate | 2 |
| 11***22 | Bucket Group-Excavation | 1 |
116-4756 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 4 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 11***55 | Bucket As-Excavation | 1 |
116-4757 Bucket Gp-Excavation
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 7 |
| 11***78 | Rod As | 2 |
| 11***79 | Spring | 2 |
5w-2857 Bucket & Bearing As -Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 5W***57 | Bucket Group.; -Ditch Cleaning | 1 |
110-7284 Coupler Gp-Quick
| 09***76 | Nut; (M20x2.5-Thd) | 8 |
| 09***74 | Bolt; (M20x2.5x50-mm) | 8 |
| 11***84 | Coupler Group-Quick | 1 |
116-3901 Hinge Gp-Coupler
| 11***01 | Hinge Group-Coupler | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
4i-7343 Sidecutter Gp
| 4I***43 | Sidecutter Group | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
3g-3237 Tip Gp-Penetration
| 1U***52 | Tip (Long) | 1 |
| 3G***37 | Tip Group; -J-300 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
4t-2215 Tip Gp-Wide
| 4T***15 | Tip Group; -J-300 | 1 |
| 9L***93 | Cap-Fuel Pressure Pickup | 1 |
8e-3755 Tip Gp-Abrasion
| 8E***55 | Tip Group-Abrasion; -Abrasion | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3758 Tip Gp-Abrasion
| 3G***50 | Tip, Wide | 1 |
| 8E***58 | Tip Group-Abrasion; -J-460, Heavy-Duty | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
8e-3750 Tip Gp-Long -J-250
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 8E***50 | Tip Group-Long; -J-250 | 1 |
9j-3169 Tip Gp-Long -J-250
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3751 Tip Gp-Long
| 8E***51 | Tip Group-Long; -J-300, Heavy-Duty | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3167 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
| 9J***67 | Tip Group-Long; -J-300 | 1 |
9w-9188 Tip Gp-Penetration
| 10***08 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
| 9J***09 | Tip (Penetration) | 1 |
100-6462 Tip Gp-Penetration
| 10***62 | Tip Group-Penetration; -J-250 | 1 |
| 13***66 | Pin-G.E.T. | 1 |
| 13***99 | Retainer As | 1 |
100-6464 Tip Gp-Penetration
| 10***64 | Tip Group-Penetration; -Penetration - Sharp Center | 1 |
| 10***08 | Pin-G.E.T. | 1 |
| 1U***01 | Tip ( Short ) | 1 |
100-6463 Tip Gp-Penetration
| 10***63 | Tip Group-Penetration; -Penetration - Sharp Corner | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9w-9189 Tip Gp-Penetration
| 13***66 | Pin-G.E.T. | 1 |
| 13***99 | Retainer As | 1 |
| 9W***09 | Tip, Sharp-Center | 1 |
9j-3175 Tip Gp-Short
| 1U***51 | Tip (Short) | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3178 Tip Gp-Short -J-250
| 10***00 | Tip-Wide | 1 |
| 13***66 | Pin-G.E.T. | 1 |
| 13***99 | Retainer As | 1 |
101-2927 Tip Gp-Wide
| 10***27 | Tip Group-Wide; -J-250 | 1 |
| 12***47 | Accumulator Group-Refrigerant | 1 |
| 13***31 | Switch Group-Pressure; -Freon | 1 |
M315 serial number reference
The PIN/serial tag on an M315 wheeled excavator is a riveted metal plate on the main frame, typically near the cab entry step or at the front of the upper frame close to the boom base, with the number also stamped into the frame steel nearby. Read the first three characters as the prefix, which identifies the model, generation, and build plant; the digits that follow are the sequential unit number. Pre-2001 units carry an 8-character serial (3-letter prefix plus 5 digits), while newer units carry the full 17-character PIN with the same 3-character prefix embedded near the start.
| Prefix | Identifies | Notes |
|---|---|---|
| 7ML | M315 wheeled excavator - original/first generation | Bare M315 mobile/wheeled excavator, earliest generation, ahead of the M315C. Runs the 3054 diesel, net rating around 114 hp (85 kW). Factory documentation splits early build (up to roughly serial 00859) from a later running change (00860 and up) under this same prefix, and both ranges are documented against the same 3054 engine designation - a mid-run parts/documentation update, not a separate variant or engine change. Rough build window is mid-1990s to early 2000s. Part of Cat's European-built wheeled-excavator line of that era. |
| KE5 | M315 wheeled excavator - current generation (successor to M315F) | Tied to the current-generation M315 wheeled excavator, the design that replaced the M315F around 2021 and runs the Cat C4.4 diesel. Only one parts-catalog listing found using this prefix for M315 - confirm with a dealer before ordering against it. |
| J4A | M315 wheeled excavator - current generation (successor to M315F) | Listed alongside KE5 on the same parts-catalog reference for the current-generation M315 wheeled excavator (C4.4 engine, post-M315F design). Likely a second plant or serial block for the same generation, but this also comes from a single listing - confirm with a dealer before ordering against it. |
Frequently asked questions
What engine does the Cat M315 use?
The current Cat M315 wheeled excavator runs a Cat C4.4 four-cylinder diesel rated at about 110 kW (148 hp) gross, meeting Tier 4 Final/EU Stage V standards with DEF/SCR aftertreatment. Regions outside Tier 4 requirements get a lower-output Cat C3.6 version of the same platform, around 90 kW (121 hp), built to Tier 3/Stage IIIA. Don't confuse either with the 3054 DIT engine used in the unrelated vintage bare-number M315, or with the engine tune fitted to the earlier lettered M315C/M315D generation.
What is the operating weight of the Cat M315?
Operating weight runs roughly 15.7 to 18.0 tonnes (34,600 to 39,700 lb) depending on undercarriage configuration, stick length and tire selection. A dozer-blade-only undercarriage sits near the low end; adding front and rear outriggers, the longer stick, or single-tire options pushes it toward the top of that range. Always confirm the specific configuration before assuming a single weight figure, since Cat's own spec sheets list several typical configurations rather than one number.
What replaced the Cat M315?
The current bare-number M315 is itself the replacement for the M315F, built roughly 2017 to 2021; in markets that ran the M315D2 platform, this M315 supersedes that line too. As of this writing, Caterpillar has not announced a successor to the current M315 generation. Don't confuse this lineage with the separate vintage bare-number M315 from the 1990s/2000s, or the lettered M315C/M315D generation, which are older, unrelated designs sharing only the model number.
What M315 owners discuss
The steering feels loose or the machine pulls to one side on the road. What's going on?
Owners report this most often traces to the oscillating steering axle circuit, not the axle housing itself. A steering cylinder with worn or improperly seated seals lets oil pass internally, so the ram floats and the machine drifts to one side, sometimes even right after a seal job if the circuit wasn't fully bled afterward. Check it by isolating pressure and watching for oil movement past the cylinder once it's hard against the stop at full lock; continued flow at that point points to a passing seal, not an adjustment issue. Because this affects road handling, have your dealer verify steering circuit pressure and the bleed procedure before the machine goes back on the highway.
It rides on axles and tires instead of tracks. What wear points replace the usual undercarriage checks?
On this platform the axle, tires, and oscillation joint do the job that track chain and rollers do on a crawler excavator. The rear axle is built for long service, and factory oil-change intervals on this design have been stretched from around 1000 to 2000 hours, but that assumes clean fluid and normal duty. Mixed on/off-road work or wet sites shorten that. Watch tire wear and inflation the same way you would on any road-going machine, and keep the oscillation pivot and axle joints greased on schedule. Skipped grease points get cited repeatedly as a cause of early play developing in that joint. A periodic oil sample from the axle and hydraulic system catches metal contamination before it becomes a repair bill.
The machine is stuck in economy or low-power mode for no obvious reason. What's the first thing to check?
A frequently reported cause is the hydraulic filter restriction switch mounted on top of the hydraulic tank. It sits somewhere it can get stepped on or bumped during routine service, and once it fails open the machine defaults into economy mode and stays there even though nothing else is actually wrong. It's a cheap, quick check before chasing a pump or valve fault. Check continuity at the switch and inspect its mounting boss for cracking before condemning anything further downstream.
I have an older bare-number M315 with no C or D suffix. What engine issues come up?
Those early wheeled M-series machines run the Cat 3054 DIT engine, a different engine than the C4.4 fitted to the current M315 lineup, so fixes and parts don't cross over between them. Owners and independent shops report the usual issues that come with this engine as it ages: gear-case oil seepage, dropping oil pressure, injection pump wear that shows up as hard starting and smoke, and random stalling that gets worse the longer service intervals get stretched. Most of it tracks with age and hours rather than a design flaw. Staying current on oil and injector service keeps it in check.
The parking brake randomly grabs while traveling or digging at low RPM. Is this normal?
This has been reported across the early M312, M315, and M318 wheeled family, and it traces back to transmission clutch pressure. When clutch pressure drops low, the automatic parking brake logic sets the brake within seconds of detecting it, and operators describe it as noticeably harder and more abrupt in low or crawl gear. The first diagnostic step shops use is checking accumulator precharge pressure in the brake and transmission circuit before assuming a clutch or pump failure. Because this is a brake-engagement safety system, have your dealer verify accumulator precharge and clutch pressure calibration rather than just clearing the symptom.
What engine or fuel-system quirks show up on the current C4.4-powered M315?
The current M315 runs the Cat C4.4 meeting Tier 4 Final and Stage V emissions standards. Mechanics who work on C4.4-powered Cat machines generally flag a couple of recurring patterns worth ruling out early: rough cold starts or unstable common-rail pressure with nothing stored as a fault code, sometimes traced to a weak fuel transfer pump or a drifting rail pressure sensor rather than the injectors; and no-start conditions where a mismatch between the engine speed sensor signals makes the ECM hold off fuel injection entirely instead of guessing which sensor is correct. Neither is unique to this specific machine, but both show up often enough on this engine family to check first. Because the common-rail system runs at very high pressure, have your dealer verify rail pressure and sensor readings rather than opening fuel lines yourself.
What should I check before buying a used M315?
First confirm which generation is actually in front of you. The bare M315 designation has been reused across a 1990s/2000s wheeled excavator built around the 3054 engine and the current C4.4-powered wheeled excavator, with C-suffix and D-suffix versions in between. Parts, engine service, and diagnostic connections are not interchangeable across them, so match the serial plate to the correct family before pricing any repairs. Beyond that: check tire wear and inflation and ask how long the current set has been in service, inspect the steering axle and oscillation joint for play, look underneath for axle or hydraulic leaks, and ask for maintenance and oil-sample records if the seller has them. Gaps in oil sampling or stretched service intervals are a common precursor to the engine and axle wear issues owners report. Cycle every attachment function and the quick coupler through full range, and test steering response at low and higher travel speed, since looseness there is one of the more commonly reported faults on this platform.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific M315 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.