Caterpillarexcavator
Caterpillar M313C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar M313C is a compact-to-mid-size wheeled excavator built from 2003 to 2006 (production ran into 2007 in some regions during the changeover to the next series). It runs a Cat 3054E DIT ATAAC diesel, a turbocharged, air-to-air aftercooled four-cylinder rated around 83-88 kW (111-120 hp) net depending on boom setup, meeting Tier 2 / Stage II emissions rules. Operating weight spans roughly 13,100 to 14,750 kg (28,900-32,500 lb) depending on configuration. Cat offered it with a fixed one-piece "Mono" boom or a two-piece variable-angle "VA/VAH" boom with a choice of stick lengths, plus front- or rear-mounted outriggers and an optional dozer blade. It followed Caterpillar's earlier M-series wheeled excavators and was replaced from 2007 by the M313D, which carries the more powerful Cat C4.4 ACERT engine.
Cat built the M313C across two serial-prefix production runs: machines assembled in Germany (roughly 2003-2005) and machines assembled in France (roughly 2005-2007), with no core spec change between the two plants. The boom choice is the main variant split on this model: the VA/VAH two-piece boom trades a little net output and adds weight for extra reach and digging-angle flexibility, while the Mono boom keeps the machine lighter and mechanically simpler. Caterpillar's move to the M313D brought a cleaner, more powerful C4.4 ACERT engine and a higher operating-weight range to meet Stage IIIA rules, at the cost of a more complex fuel and emissions system. That trade-off is what keeps the pre-ACERT M313C in demand on the used market today: fewer electronic failure points, simpler diagnostics, and a 3054E engine platform shared across several other Cat compact machines, which keeps parts and rebuild-kit availability strong.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar M313C specifications
Engine
| Engine model | Cat 3054E DIT ATAAC, 4-cylinder diesel with turbocharger and air-to-air aftercooling |
| Net power | 88 kW (118-120 hp) at 2,000 rpm |
| Gross power | Not published separately from the net rating in available spec sheets |
| Displacement | 4.4 L (269 cu in) |
| Bore x stroke | 106.7 mm x 127 mm (4.2 in x 5.0 in) |
| Max torque | 500 Nm (369 lb-ft) at 1,400 rpm |
| Emissions tier | US EPA Tier 2 nonroad diesel |
Weights
| Operating weight | 13,100-14,750 kg (28,880-32,520 lb); varies by boom type and equipped options - one-piece (mono) boom machines run toward the lower end, VA-boom machines toward the upper end |
| Ground pressure | Not applicable - wheeled undercarriage on pneumatic tires, no ground-pressure figure published |
| Transport weight | Not documented separately from operating weight in available spec sheets |
Dimensions
| Transport length | 8.08-8.61 m (26 ft 6 in - 28 ft 3 in); varies by boom/stick/bucket combination |
| Transport width (travel) | 2.49-2.55 m (8 ft 2 in - 8 ft 4 in) |
| Width, stabilizers/outriggers deployed | 3.67 m (12 ft 0 in) |
| Height to cab top | 3.07-3.12 m (10 ft 1 in - 10 ft 3 in) |
| Wheelbase | 2.50 m (8 ft 2 in) |
| Ground clearance | 0.37 m (1 ft 2 in) |
| Counterweight tail clearance | 1.23 m (4 ft 0 in) |
| Tail swing radius | Not documented in available spec sheets - verify with dealer |
| Tire size | 10.00-20, dual pneumatic (standard fitment) |
Performance
| Max dig depth | 5.75-5.76 m (18 ft 10 in - 18 ft 11 in) with VA boom; 5.45 m (17 ft 11 in) with one-piece mono boom |
| Max reach at ground level | 9.03-9.05 m (29 ft 8 in - 29 ft 9 in) with VA boom; 9.82 m (32 ft 3 in) with mono boom |
| Max dump/loading height | 7.29 m (23 ft 11 in) |
| Max cutting height | 10.06 m (33 ft 0 in) |
| Max vertical-wall dig depth | 3.89 m (12 ft 9 in), VA boom |
| Swing speed | 10.5 rpm |
| Max travel speed | 34 km/h (21.2 mph); creeper/1st gear approx. 4 km/h (2.5 mph) |
| Max gradeability | 67 percent |
| Max steering angle | 33.5 degrees |
| Drawbar pull | Not documented for this model in available spec sheets |
Forces
| Bucket digging force | Approx. 87 kN (19,600 lbf), reported for VA boom configuration |
| Stick (arm) digging force | 68 kN (15,300 lbf) with VA boom; 62 kN (13,900 lbf) with mono boom |
Service capacities (summary)
| Fuel tank | 235 L (62.1 gal) |
| Hydraulic system | 165 L (43.6 gal) |
| Engine oil | 9 L (2.4 gal) |
| Cooling system | 30 L (8.0 gal) |
| Axle differentials (front/rear) | Front approx. 9 L, rear approx. 11 L |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
M313C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 9 L (2.4 US gal) | Cat DEO diesel engine oil. SAE 15W-40 for warm/temperate climates; SAE 10W-30 recommended below roughly -18°C (0°F), down to about -30°C (-22°F), per Cat's standard engine-oil viscosity-by-temperature guidance for this engine class. |
| Cooling system | 30 L (8.0 US gal) | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant) premixed 50/50 with water for freeze/boil protection; if DEAC is used, top up with Cat Supplemental Coolant Additive (SCA) on schedule. ELC does not need SCA. |
| Fuel tank | 235 L (62.1 US gal) | No. 2-D diesel fuel meeting the engine's emissions-tier fuel-sulfur requirement; No. 1-D or a winter-blend diesel recommended in cold climates to prevent fuel waxing/gelling. |
| Hydraulic system total / hydraulic tank | Total system approx. 165 L (43.6 US gal); hydraulic tank refill approx. 95 L (25 US gal) | Cat HYDO Advanced hydraulic oil, graded by climate: Cat HYDO Advanced 10 for cold/temperate operation, Cat HYDO Advanced 30 for sustained hot-climate operation. Cat Bio HYDO Advanced is the approved biodegradable alternative where required. |
| Front axle differential | 9 L (2.4 US gal) | Cat TDTO (Transmission/Drive Train Oil). SAE 30 for warm/temperate climates, SAE 10W for cold climates; Cat TDTO-TMS (multi-season) where ambient swings are wide. |
| Rear axle differential | 11 L (2.9 US gal) | Cat TDTO, same viscosity-by-climate selection as the front axle differential (SAE 30 warm, SAE 10W cold). |
| Final drive / wheel-hub reduction (each) | 2.65 L (0.7 US gal) per wheel end | Cat TDTO, matched in grade to the axle differential fluid used on the same machine. |
| Travel (powershift) transmission | 3 L (0.8 US gal) | Cat TDTO. SAE 30 standard for temperate/warm operation, SAE 10W for cold-weather starts; Cat TDTO-TMS where the machine sees both extremes seasonally. |
| Swing drive | Not published as a distinct refill figure in factory spec sheets for this model; expect a small gear-case fill, not a large sump | Cat TDTO gear oil, matched in grade to the final drives and axles. Confirm the exact fill quantity against the machine's own lubrication chart or with a dealer. |
| Grease (spec only) | Applied at grease fittings per the lubrication schedule, not a sump fill | Cat Multipurpose Grease (Cat MPGM), NLGI 2, for routine pin and bushing points. Cat Extreme Application (XA) grease is the recommended upgrade for high-load pin joints in very hot or very cold climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar M313C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the M313C beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull engine, hydraulic, axle, and swing-drive oil samples on a fixed interval and trend them, not just react to one bad report. The 3054E DIT ATAAC turbo and injectors show up early in engine oil wear metals; the wheeled undercarriage puts axle and swing-gearbox oil under more shock load than a crawler machine, so watch those samples for metal fines. Track hydraulic oil cleanliness closely since one reservoir feeds the boom, swing motor, and outrigger circuits.
Corrective & Common Repairs
Boom, stick, and bucket cylinder seals are the most common leak point on high-hour M313C units; reseal at the first sign of rod scoring rather than waiting for a full seal failure. Swing motor and reduction-gearbox wear shows up as slow or jerky rotation, worse on the heavier VA-boom units. Outrigger cylinder drift and axle oscillation-bushing wear are wheeled-chassis-specific issues to check on every inspection. Also check pilot solenoid valves for sticking, a known weak point on this electronic hydraulic system.
Overhaul & Rebuild Points
Plan an in-frame engine overhaul (liners, bearings, turbo core) around oil-analysis trends rather than a fixed hour number on the 3054E DIT ATAAC. Hydraulic pump and main control valve rebuilds usually follow, since pump wear tracks engine hours on this platform. Rebuild the swing gearbox and reseal boom/stick/bucket pins and bushings at the same visit to avoid repeat downtime. On wheeled units, inspect the axle differentials, planetary final drives, and outrigger box welds for fatigue cracking before a full structural rebuild.
Seasonal & Environment Servicing
Check coolant freeze protection and battery condition before winter; the 3054E's injection pump can struggle to start cold without a functioning glow-plug or ether-start aid, so test it each fall. Drain the fuel water separator more often in wet or humid climates to keep water out of the injection system. Because the M313C rides on tires, not tracks, adjust tire pressure for temperature swings each season, unlike a crawler machine. In hot, dusty conditions, service the cab air filter and engine air filter more frequently to protect the AC system and turbo.
M313C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 067-6897 | Element Kit, Fuel Filter | Fuel system service | Check fitment → |
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 226-8773 | Regulator As-Voltage | Fuel system service | Check fitment → |
| 222-9020 | Filter Element As-Air | Air intake service | Check fitment → |
| 185-8154 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
M313C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 110-0 | Engine coolant temperature above normal operating range (overheat) | Low coolant level, blocked or damaged radiator, failed thermostat, slipping or damaged fan drive, or a genuinely high reading confirmed by the sensor circuit | Idle down and shut off safely, check coolant level and look for external leaks, inspect radiator fins and fan drive, verify thermostat operation before restarting |
| 100-1 | Engine oil pressure below normal operating range (low oil pressure) | Low engine oil level, plugged oil filter or suction screen, worn oil pump, or worn main/rod bearings | Shut engine down immediately, check oil level and condition, inspect filter for bypass, confirm sender wiring before returning to service |
| 600-0 | Hydraulic oil temperature above normal operating range (hydraulic system overheat) | Low hydraulic fluid level, clogged or dirty oil cooler, weak cooling fan or fan drive, or sustained relief-valve bypass from an overloaded circuit | Reduce load and let the machine idle to cool, check hydraulic fluid level, clean the cooler core, inspect the cooling fan drive |
| 190-8 | Engine speed/timing signal abnormal (erratic or missing speed signal) | Damaged or loose speed sensor, incorrect sensor air gap, chafed harness wiring, or a corroded connector | Inspect the speed sensor wiring and connector, check and reset the sensor air gap per spec, replace the sensor if the signal stays erratic |
| 168-1 | Electrical system voltage below normal (low battery/charging voltage) | Weak or discharged battery, loose or corroded battery/ground connections, or a failing alternator or voltage regulator | Load-test the battery, clean and tighten all battery and ground connections, check alternator charging output with the engine running |
| 91-8 | Throttle/engine-speed-dial signal abnormal (erratic speed demand signal) | Worn speed-control dial potentiometer, damaged wiring to the dial, or a corroded connector at the dial or ECM | Check wiring and connector at the speed dial, test the dial's signal against spec, replace the dial or repair wiring if out of range |
| 588-2 | Data link fault between the machine ECM and the monitor/gauge cluster (erratic or lost communication) | Damaged or loose data-link wiring between ECM and monitor, a loose harness connector, or a blown fuse feeding the monitor | Check power and ground to the monitor, inspect data-link wiring and connectors at the ECM and monitor, check the monitor fuse before replacing components |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
M313C attachments & work tools
Buckets
General purpose bucket capacity runs roughly 0.5-0.76 m3 (0.65-1.0 yd3) across Cat's GP bucket lineup offered for this machine, with the largest GP bucket at about 900mm (35-36in) wide; exact top capacity varies with Mono-boom vs VAH (variable-angle) boom configuration, since the VAH's reduced structural reach caps out lower than the Mono boom. An extreme-service (heavy-duty/rock) bucket is also offered, trading capacity for a reinforced profile for abrasive and rock digging versus the top-capacity GP bucket. Ditch-cleaning buckets (wide, shallow profile) cover grading and slope-finishing work. Buckets mount pin-on as standard, with pin bosses sized to match this size class's quick-coupler lineup.
Hydraulic hammers
At roughly 13.6-14.5t operating weight, the M313C sits in the carrier weight class covered by Cat's H110Es/H115Es breaker line (rated for roughly 11-20t carriers), putting the matching hammer around 1.0-1.5 tonne working weight. The hammer runs off the machine's high-pressure auxiliary circuit through the factory hammer function valve, separate from the medium-pressure tilt/rotate circuit.
Quick couplers
This class uses Cat's excavator coupler lineup: Pin Grabber Plus (manual or hydraulically actuated, grabs any tool with standard pins), Pin-Lock (single manually-inserted pin, hook-and-lock design for fast tool swaps around a minute), and Wedge-Lock (dedicated coupler with the broadest work-tool compatibility for this size class). A Tilt-Lock version adds hydraulic tilt functionality for grading and ditch work.
Thumbs/grapples
Pin Grabber-style couplers used on this class also accept thumbs and grapples alongside buckets and hammers, so both a pin-on or coupler-mounted thumb and a contractor-style grapple are usable on the M313C for material handling and sorting. Exact thumb opening/capacity figures for this specific model are not documented - confirm reach against the stick length in use (interchangeable sticks from about 2.01m to 2.9m are offered) with your dealer.
Rippers
No dedicated boom-mounted ripper attachment is listed in Cat's work-tool lineup for the M313C wheel excavator; this size class is not typically fitted with one. Light ripping duty on machines this size is usually handled with standard bucket teeth or a single ripping tip rather than a separate ripper tool - verify availability with your dealer if this is required.
Hydraulic-kit notes
The M313C carries separate high-pressure and medium-pressure auxiliary work-tool circuits: a high-pressure line (roughly 190 L/min at about 330-350 bar) for single-function tools such as hammers and shears, and a medium-pressure line (roughly 50 L/min at about 170 bar) for tilt/rotate functions like a tilt bucket or tiltrotator. An electronic tool control system lets the operator store several flow and pressure presets from the cab monitor for quick changeovers between tools.
All M313C assemblies by section
Every catalogued assembly group for the Caterpillar M313C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
188-2811 Aftercooler Gp-Air
| 18***11 | Aftercooler Group-Air | 1 |
| 19***53 | Aftercooler As | 1 |
| 19***91 | Plate | 3 |
207-1704 Air Cleaner Gp
| 20***04 | Air Cleaner Group | 1 |
| 22***51 | Air Cleaner Group | 1 |
| 22***52 | Bracket-Mounting | 1 |
207-2145 Air Cleaner Gp
| 20***04 | Air Cleaner Group | 1 |
| 20***09 | Switch As-Pressure; (Air Restriction) | 1 |
| 20***45 | Air Cleaner Group | 1 |
234-3472 Connection Gp-Inlet
| 11***79 | Gasket | 3 |
| 11***62 | Plate | 2 |
| 23***69 | Plate | 1 |
236-5932 Lines Gp-Air
| 14***38 | Clip-Loop | 1 |
| 23***32 | Lines Group-Air | 1 |
| 23***33 | Hose-Air Inlet | 1 |
207-0384 Lines Gp-Air
| 11***25 | Seal; (89.5 cm) | 0 |
| 14***67 | Clamp; (Hose) | 7 |
| 14***38 | Clip-Loop | 1 |
212-6822 Muffler Gp
| 19***15 | Tube-Exhaust | 1 |
| 19***48 | U-Bolt | 2 |
| 21***09 | Pipe As | 1 |
215-9400 Shield Gp-Engine Compartment
| 11***48 | Plate | 2 |
| 11***23 | Plate | 2 |
| 12***44 | Plate | 1 |
243-3823 Turbocharger Gp
| 10***16 | Bolt; (M6x16-mm) | 1 |
| 14***53 | Stud | 7 |
| 17***38 | Bolt | 8 |
Basic Engine
159-1464 Adapter Gp-Auxiliary Drive
| 08***72 | Plug-O-Ring | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 2 |
| 11***68 | Pin | 2 |
234-2674 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 23***74 | Camshaft Group | 1 |
| 35***46 | Camshaft As | 1 |
234-3593 Cover Gp-Valve Mechanism
| 10***58 | Bolt; (M8x1.25x14-mm) | 1 |
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 10***77 | Stud | 3 |
234-2670 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
234-2669 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7604 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
234-2672 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 22***05 | Cylinder Head Group | 1 |
225-5505 Cylinder Head Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
163-4461 Drain Gp-Engine Oil
| 15***55 | Adapter | 1 |
| 16***61 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
198-4679 Drain Gp-Oil -Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***55 | Adapter | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
231-0047 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 10***75 | Bearing | 1 |
| 10***76 | Clip | 1 |
230-8082 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 13***80 | Pulley-Fan Drive | 1 |
| 23***65 | Spring Extension, Housing As | 1 |
236-8181 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 12***65 | V-Belt Set; (Includes 2-Belts)(1359-mm) (Fan Drive) | 1 |
| 13***80 | Pulley-Fan Drive | 1 |
243-3398 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 10***31 | Flywheel As | 1 |
224-2162 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
232-6179 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 06***97 | Element Kit, Fuel Filter | 1 |
| 06***00 | Plate-Retaining | 1 |
233-7432 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 2 |
| 23***32 | Lifting Group-Engine | 1 |
207-0374 Mounting Gp-Engine Flexible
| 12***42 | Washer; (17x75x6-mm Thk) | 4 |
| 20***74 | Mounting Group-Engine Flexible | 1 |
| 20***06 | Mount As | 2 |
234-3586 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 12***34 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
318-2260 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 21***18 | Valve-Check | 1 |
234-2671 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
234-4215 Plug Gp-Engine
| 13***56 | Elbow | 1 |
| 23***15 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
253-2478 Plug Gp-Engine
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***61 | Plug; (Blanking) | 1 |
234-3542 Plug Gp-Flywheel Housing
| 23***36 | Plug | 4 |
| 23***42 | Plug Group-Flywheel Housing | 1 |
| 6H***16 | Plug-Protective | 10 |
230-7552 Pulley Gp
| 13***81 | Pulley-Fan | 1 |
| 23***52 | Pulley Group; -Fan Auxiliary | 1 |
230-7352 Pulley Gp-Crankshaft
| 11***97 | Pulley | 1 |
| 23***52 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
234-2673 Valve Mechanism Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
Cooling System
230-8086 Connection Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 23***86 | Connection Group-Water | 1 |
| 25***68 | Regulator As-Water Temperature; (Connector Included) | 1 |
267-0333 Cooler Gp-Fltr Base & Eng Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
234-3460 Cooler Gp-Fltr Base & Eng Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
188-2812 Fan Gp-Suction -Aftercooler
| 10***89 | Bolt; (M8x1.25x130-mm) | 4 |
| 18***12 | Fan Group-Suction; -Aftercooler | 1 |
| 19***59 | Spider As-Fan; (7-Blade) | 1 |
207-0376 Fan Gp-Suction -Hydraulic Cooling
| 19***57 | Adapter | 1 |
| 20***76 | Fan Group-Suction; -Hydraulic Cooling | 1 |
| 23***03 | Fan As-Suction; (9-Blade) | 1 |
188-2813 Guard Gp-Fan -Aftercooler
| 11***23 | Seal; (87.2-cm) | 0 |
| 15***40 | Nut-Weld; (M8x1.25-Thd) | 2 |
| 18***13 | Guard Group-Fan; -Aftercooler | 1 |
207-0377 Guard Gp-Fan
| 11***28 | Spring As-Gas; (Rh) | 1 |
| 11***25 | Spring As-Gas; (Lh)(Rh) | 1 |
| 20***77 | Guard Group-Fan | 1 |
241-3617 Guard Gp-Fan -High Ambient Temp Cooling
| 20***77 | Guard Group-Fan | 1 |
| 24***17 | Guard Group-Fan; -High Ambient Temp Cooling | 1 |
239-3800 Guard Gp-Fan
| 12***65 | Spring-Gas | 1 |
| 15***40 | Nut-Weld; (M8x1.25-Thd) | 1 |
| 21***72 | Valve Group | 1 |
214-8995 Lines Gp-Coolant
| 06***35 | Fitting-Pipe | 1 |
| 09***61 | Strap; (Cable) | 1 |
| 10***73 | Clip | 6 |
230-7355 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
207-0375 Radiator Gp
| 11***21 | Seal; (85-cm Each) | 0 |
| 14***61 | Seal; (62.5-cm) | 0 |
| 15***24 | Elbow As | 1 |
213-1012 Tank Gp-Coolant
| 03***19 | Cap As-Radiator | 1 |
| 19***51 | Switch Group-Liquid Level; -Coolant-Hydraulic Oil | 1 |
| 21***12 | Tank Group-Coolant | 1 |
Electrical And Starting System
188-4971 Alarm Gp-Travel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
234-3463 Alternator Gp-Charging
| 06***66 | Washer | 1 |
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
207-0407 Battery & Wiring Gp
| 01***80 | Lockwasher | 2 |
| 09***92 | Clip | 2 |
| 09***61 | Strap; (Cable) | 0 |
8r-8714 Battery Gp -Heavy Duty
| 8R***14 | Battery Group; -Maintenance Free | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
186-0485 Box Gp-Junction
| 09***61 | Strap; (Cable) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
204-7008 Control & Mtg Gp-Machine
| 15***76 | Mount-Isolation | 8 |
| 20***02 | Spacer; (8.2x17.2x37.5-mm Thk) | 4 |
| 20***08 | Control & Mtg Group-Machine | 1 |
242-7205 Control Gp-Communication -Product Link 201
| 17***59 | Film-Cover | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
240-5535 Converter Gp-Electrical
| 24***35 | Converter Group-Electrical | 1 |
| 30***83 | Resistor As; (24-Volt) | 1 |
217-9535 Electronics Gp-Machine
| 21***35 | Electronics Group-Machine | 1 |
| 24***67 | Software Group-Machine; (Soft Switch Panel) | 1 |
| 24***68 | Control Group-Unprogrammed; (Soft Switch Panel) | 1 |
204-7010 Electronics Gp-Machine
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 18***77 | Control Group-Unprogrammed; -Tractor Xmsn Control | 1 |
| 20***10 | Electronics Group-Machine | 1 |
233-9834 Glow Plug Gp
| 22***70 | Glow Plug; (24-Volt)(12-Volt) | 4 |
| 23***26 | Clip | 1 |
| 23***34 | Glow Plug Group | 1 |
211-8205 Installation Gp-Communication
| 09***61 | Strap; (Cable) | 6 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***98 | Plate | 2 |
206-6097 Installation Gp-Security
| 09***61 | Strap; (Cable) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
199-3137 Lamp Gp-Flood -Rear
| 12***52 | Screw | 2 |
| 19***37 | Lamp Group-Flood; -Rear | 1 |
| 3T***52 | Locknut; (M8x1.25-Thd) | 1 |
193-4287 Lamp Gp-Head
| 11***19 | Lamp As; (Headlight) | 2 |
| 12***53 | Lockwasher | 2 |
| 12***54 | Cap | 1 |
116-9625 Lamp Gp-Rear
| 11***25 | Lamp Group-Rear | 1 |
| 11***20 | Glass As; (Rear Lamp) | 1 |
| 11***70 | Screw-Special | 2 |
191-7538 Lamp Gp-Rear
| 09***61 | Strap; (Cable) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Lamp Group-Signal | 2 |
116-9626 Lamp Gp-Signal -Front
| 11***26 | Lamp Group-Signal; -Front | 1 |
| 11***18 | Glass As; (Front Signal Lamp) | 1 |
| 11***69 | Screw | 1 |
193-4288 Lamp Gp-Signal -Front
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 11***26 | Lamp Group-Signal; -Front | 2 |
| 19***88 | Lamp Group-Signal; -Front | 1 |
116-9624 Lamp Gp-Signal
| 11***24 | Lamp Group-Signal | 1 |
| 11***19 | Glass As | 1 |
| 11***70 | Screw-Special | 2 |
116-9627 Lamp Gp-Warning Beacon
| 11***27 | Lamp Group-Warning Beacon | 1 |
| 11***21 | Glass | 1 |
| 11***22 | Motor As | 1 |
199-7529 Lamp Gp-Warning Beacon
| 11***21 | Glass | 1 |
| 11***22 | Motor As | 1 |
| 19***29 | Lamp Group-Warning Beacon | 1 |
195-6851 Lighting Ar-Flood -Front, Rear
| 18***47 | Lighting Group-Flood; -Rear | 1 |
| 19***51 | Lighting Ar-Flood; -Front, Rear | 1 |
| 19***30 | Lighting Group-Flood; -Front | 1 |
188-4945 Lighting Gp-Flood -Boom
| 09***61 | Strap; (Cable) | 15 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
198-4677 Lighting Gp-Flood -Guard, Front
| 09***61 | Strap; (Cable) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 2 |
196-1130 Lighting Gp-Flood -Front
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 4 |
| 19***30 | Lighting Group-Flood; -Front | 1 |
| 19***38 | Lamp Group-Flood; (Front) | 2 |
188-4947 Lighting Gp-Flood -Rear
| 12***52 | Screw | 4 |
| 17***19 | Boot | 1 |
| 18***47 | Lighting Group-Flood; -Rear | 1 |
188-4948 Lighting Gp-Roading -Stick
| 11***07 | Clamp; (Lh) | 2 |
| 11***39 | Plate | 1 |
| 12***31 | Plate As | 1 |
190-0286 Lighting Gp-Roading
| 19***86 | Lighting Group-Roading | 1 |
| 19***38 | Lamp Group-Rear | 1 |
| 19***87 | Lamp Group-Head | 1 |
229-5615 Lighting Gp-Roading
| 09***61 | Strap; (Cable) | 14 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
188-4949 Lighting Gp-Warning Beacon
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***67 | Socket-Wiring | 1 |
| 18***49 | Lighting Group-Warning Beacon | 1 |
193-4289 Reflector Gp
| 11***21 | Reflector-Yellow | 4 |
| 19***89 | Reflector Group | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
196-5649 Sensor Gp-Fuel Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***49 | Sensor Group-Fuel Level | 1 |
| 19***75 | Float | 1 |
199-2976 Sensor Gp-Position -Swashplate
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 2 |
| 19***76 | Sensor Group-Position; -Swashplate | 1 |
| 19***79 | Sensor As-Position; (Swashplate Angle) | 1 |
230-7304 Starting Motor Gp-Electric
| 22***50 | Starting Motor Group-Electric | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
196-5651 Switch Gp-Liquid Level -Coolant-Hydraulic Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***51 | Switch Group-Liquid Level; -Coolant-Hydraulic Oil | 1 |
| 19***91 | Float | 1 |
188-4970 Switch Gp-Rocker -Overload Warning Device
| 09***61 | Strap; (Cable) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***01 | Switch Group-Pressure; (Overload Pressure) | 1 |
9g-7641 Switch Gp-Start
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
238-4739 Wiring Gp-Boom
| 09***61 | Strap; (Cable) | 9 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
187-3799 Wiring Gp-Cab
| 09***61 | Strap; (Cable) | 5 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
221-9037 Wiring Gp-Cab -Front Window, 1-Piece
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 21***13 | Grommet | 1 |
| 22***37 | Wiring Group-Cab; -Front Window, 1-Piece | 1 |
188-4968 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 41 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
209-8865 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 10 |
| 09***92 | Washer, Tooth | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
202-1136 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 15 |
| 09***92 | Washer, Tooth | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
186-0486 Wiring Gp-Chassis
| 09***61 | Strap; (Cable) | 30 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
187-3798 Wiring Gp-Console
| 09***61 | Strap; (Cable) | 6 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 09***12 | Spacer; (26x32x2-mm Thk) | 1 |
232-6670 Wiring Gp-Electronic Control
| 10***41 | Bolt; (M6x1x10-mm) | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
239-0164 Wiring Gp-Engine
| 09***61 | Strap; (Cable) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
211-7985 Wiring Gp-Fan -Radiator
| 09***61 | Strap; (Cable) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***85 | Wiring Group-Fan; -Radiator | 1 |
213-6476 Wiring Gp-Hammer
| 09***61 | Strap; (Cable) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
188-4954 Wiring Gp-Undercarriage/Swivel
| 09***61 | Strap; (Cable) | 20 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
211-8208 Wiring Gp-Work Tool
| 09***61 | Strap; (Cable) | 6 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
Engine Arrangement
188-5099 Engine Ar-Primary
| 18***99 | Engine Ar-Primary | 1 |
| 22***62 | Housing Group-Flywheel | 1 |
| 22***42 | Filter Group-Engine Oil | 1 |
212-6809 Installation Ar-Engine
| 18***12 | Compressor Group-Refrigerant | 1 |
| 18***11 | Aftercooler Group-Air | 1 |
| 18***12 | Fan Group-Suction; -Aftercooler | 1 |
Frame And Body
212-6811 Counterweight Gp
| 11***37 | Washer; (31x68x10-mm Thk) | 3 |
| 13***15 | Ring | 3 |
| 14***12 | Spacer; (31x80x50-mm Thk) | 1 |
250-0117 Counterweight Gp
| 25***17 | Counterweight Group | 1 |
| 25***20 | Counterweight As | 1 |
186-0491 Door Gp-Access -Lh, Front
| 11***23 | Ring-Retaining | 2 |
| 18***91 | Door Group-Access; -Lh, Front | 1 |
| 19***93 | Door As | 1 |
212-6814 Door Gp-Access -Lh, Rear
| 11***26 | Spring-Gas | 1 |
| 11***21 | Seal; (85-cm Each) | 0 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
203-4501 Door Gp-Access -Lh
| 11***23 | Ring-Retaining | 2 |
| 19***11 | Pin | 2 |
| 20***01 | Door Group-Access; -Lh | 1 |
233-2983 Door Gp-Access
| 12***48 | Seal; (70-cm) | 0 |
| 12***38 | Screw-Machine; (M6x1x16-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 2 |
203-4503 Door Gp-Access -Engine, Side
| 10***40 | Ring; (Retaining) | 2 |
| 19***11 | Pin | 2 |
| 20***03 | Door Group-Access; -Engine, Side | 1 |
219-5284 Door Gp-Access -Cab Riser
| 11***23 | Ring-Retaining | 2 |
| 14***42 | Lock Assem. | 1 |
| 19***11 | Pin | 2 |
211-4574 Door Gp-Access -Engine, Upper
| 12***48 | Seal; (70-cm) | 0 |
| 12***38 | Screw-Machine; (M6x1x16-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 2 |
201-5675 Door Gp-Access -Tool Box
| 20***73 | Door As | 1 |
| 20***75 | Door Group-Access; -Tool Box | 1 |
| 6V***57 | Latch As-Handle | 1 |
212-6813 Enclosure Gp-Engine
| 09***24 | Bolt; (M12x1.75x80-mm) | 1 |
| 11***29 | Spring-Gas | 1 |
| 11***26 | Spring-Gas | 1 |
196-5700 Enclosure Gp-Radiator
| 11***23 | Ring-Retaining | 2 |
| 11***03 | Bumper | 2 |
| 12***00 | Seal; (106.5cm) | 0 |
188-4961 Frame Gp-Cab Riser
| 11***24 | Seal; (308-cm) | 0 |
| 12***61 | Step As | 1 |
| 12***03 | Cover Group-Cab Riser | 1 |
201-1100 Frame Gp-Upper
| 09***86 | Shim (1.0mm Thick) | 3 |
| 09***18 | Shim; (2-mm Thk) | 3 |
| 09***49 | Washer; (22x60x6-mm Thk) | 3 |
212-6816 Gear & Bearing Gp-Swing
| 11***55 | Plate-Swing Bearing | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***13 | Gear & Bearing Group | 1 |
212-6820 Guard Gp-Bottom
| 11***24 | Cover-Rear; (Lh)(Rear, Lh) | 2 |
| 11***86 | Cover-Rear; (Rh)(Rh Rear) | 1 |
| 11***17 | Cover (Rh Front) | 1 |
212-6812 Hood & Guard Ar
| 18***91 | Door Group-Access; -Lh, Front | 1 |
| 18***92 | Step Group | 1 |
| 19***94 | Walkway Group | 1 |
210-0607 Insulation Gp-Heat
| 21***07 | Insulation Group-Heat | 1 |
| 21***14 | Insulation | 1 |
| 21***17 | Insulation | 1 |
210-0603 Insulation Gp-Sound Suppr
| 21***03 | Insulation Group-Sound Suppr | 1 |
| 21***05 | Insulation | 1 |
| 21***06 | Insulation | 1 |
211-4570 Panel Gp-Enclosure
| 11***25 | Seal; (89.5 cm) | 0 |
| 19***03 | Plate | 1 |
| 19***21 | Baffle | 1 |
244-2415 Shield Gp-Heat
| 24***13 | Support As | 1 |
| 24***14 | Insulation-Heat | 1 |
| 24***15 | Shield Group-Heat | 1 |
186-0492 Step Gp
| 18***92 | Step Group | 1 |
| 19***95 | Sheet | 1 |
| 22***70 | Sheet | 1 |
207-0357 Step Gp
| 20***57 | Step Group | 1 |
| 20***21 | Step As | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
207-0356 Step Gp-Tool Box
| 11***87 | Seal; (132-cm) | 0 |
| 20***00 | Box As-Tool | 1 |
| 20***75 | Door Group-Access; -Tool Box | 1 |
207-0368 Step Gp-Tool Box
| 11***87 | Seal; (132-cm) | 0 |
| 20***00 | Box As-Tool | 1 |
| 20***75 | Door Group-Access; -Tool Box | 1 |
207-2160 Suppression Gp-Sound
| 20***60 | Suppression Group-Sound | 1 |
| 21***03 | Insulation Group-Sound Suppr | 1 |
| 21***07 | Insulation Group-Heat | 1 |
190-0294 Walkway Gp
| 11***69 | Snubber | 1 |
| 11***70 | Buffer | 1 |
| 11***82 | Boss | 1 |
Fuel System
8u-0876 Hose Gp-Refueling
| 5W***50 | Clamp-Hose | 2 |
| 5W***54 | Coupling-Hose | 1 |
| 5W***55 | Hose As.-Suction | 1 |
207-0371 Lines Gp-Fuel
| 11***13 | Grommet | 2 |
| 14***10 | Valve Group-Fuel Shutoff | 1 |
| 19***18 | Plate As | 1 |
254-4263 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
239-0146 Pump Gp-Fuel Priming
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 23***64 | Pump Group-Fuel Priming | 1 |
| 23***46 | Pump Group-Fuel Priming | 1 |
188-4937 Pump Gp-Fuel Transfer
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 12***29 | Hose; (240-cm Each) | 0 |
234-3538 Pump Gp-Fuel Priming
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 22***73 | Regulator As-Voltage; (24-Volt)(Fuel Filter) | 1 |
| 23***08 | Pump As-Fuel Priming | 1 |
198-4664 Tank & Mtg Gp-Fuel
| 15***27 | Tube As-Drain | 1 |
| 16***92 | Clip | 2 |
| 19***65 | Strap As | 1 |
196-1772 Tank Gp-Fuel
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 1 |
| 13***56 | Seal-O-Ring | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
145-7210 Valve Gp-Fuel Shutoff
| 14***10 | Valve Group-Fuel Shutoff | 1 |
| 19***80 | Valve Group-Flow Control; -Fuel Shutoff | 2 |
| 19***16 | Lever | 1 |
Hydraulic System
8u-7274 Accumulator As-Hydraulic -Charged
| 8U***74 | Accumulator As-Hydraulic; -Charged | 1 |
8u-6159 Accumulator Gp-Hydraulic -Charged
| 8U***59 | Accumulator Group-Hydraulic; -Charged | 1 |
255-8549 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 25***49 | Accumulator Group-Hydraulic; -Uncharged | 1 |
8u-2924 Accumulator Gp-Hydraulic -Charged
| 8U***24 | Accumulator Group-Hydraulic; -Charged | 1 |
8u-3661 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 8U***61 | Accumulator Group-Hydraulic; -Uncharged | 1 |
207-4704 Actuator Gp
| 06***39 | Seal-O-Ring | 2 |
| 11***99 | Nut-Cap; (M12x1-Thd) | 1 |
| 11***25 | Nut; (M12x1-Thd) | 1 |
207-4706 Actuator Gp
| 20***06 | Actuator Group | 1 |
159-8010 Actuator Gp-Pump
| 15***10 | Actuator Group-Pump | 1 |
| 15***44 | Cover | 1 |
| 15***45 | Cover | 1 |
245-3747 Actuator Gp-Pump
| 08***72 | Plug-O-Ring | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 1 |
140-1800 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***32 | Piston | 9 |
229-0622 Barrel Gp-Pump
| 09***58 | Ring-Retaining | 1 |
| 12***20 | Seal-Shaft | 1 |
| 12***32 | Piston | 9 |
179-9932 Barrel Gp-Pump
| 11***16 | Screw | 7 |
| 13***02 | Disc | 1 |
| 13***03 | Plate | 1 |
187-3794 Control Gp-Brake
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***93 | Screw; (M3x0.5x8-mm)(M3x0.5x8mm) | 2 |
212-6827 Conversion Ar-Hydraulic
| 18***54 | Wiring Group-Undercarriage/Swivel | 1 |
| 18***24 | Lines Group-Hydraulic | 1 |
| 21***27 | Conversion Ar-Hydraulic | 1 |
133-1581 Coupling Gp-Flexible
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 13***81 | Coupling Group-Flexible | 1 |
| 13***71 | Hub-Coupling | 1 |
275-4911 Coupling Gp-Flexible
| 13***81 | Coupling Group-Flexible | 1 |
| 27***11 | Coupling Group-Flexible | 1 |
| 7X***74 | Bolt | 8 |
120-0306 Cylinder & Mtg Gp-Axle Lock
| 12***06 | Cylinder & Mtg Group-Axle Lock | 1 |
| 22***00 | Cylinder Group-Axle Osc Lock | 2 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 8 |
198-7253 Cylinder & Seal Gp-Boom
| 09***34 | Shim; (T=69.85mm) | 2 |
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 19***09 | Cylinder Group-Boom | 1 |
198-7254 Cylinder & Seal Gp-Boom
| 09***34 | Shim; (T=69.85mm) | 2 |
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 19***10 | Cylinder Group-Boom | 1 |
198-7255 Cylinder & Seal Gp-Boom
| 19***11 | Cylinder Group-Boom | 1 |
| 19***55 | Cylinder & Seal Group-Boom | 1 |
| 7X***03 | Seal (Id=90.00mm); (Od=106.15mm) | 2 |
198-7257 Cylinder & Seal Gp-Bucket
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 19***13 | Cylinder Group-Bucket | 1 |
| 19***57 | Cylinder & Seal Group-Bucket | 1 |
198-7256 Cylinder & Seal Gp-Stick
| 09***34 | Shim; (T=69.85mm) | 4 |
| 19***12 | Cylinder Group-Stick | 1 |
| 19***56 | Cylinder & Seal Group-Stick | 1 |
8u-4461 Cylinder Gp-Axle Osc Lock
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 4 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
226-3700 Cylinder Gp-Axle Osc Lock
| 12***42 | Seal-O-Ring | 1 |
| 22***41 | Ring-Backup | 1 |
| 22***00 | Cylinder Group-Axle Osc Lock | 1 |
252-7300 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***17 | Cone | 1 |
221-3540 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***17 | Cone | 1 |
198-7209 Cylinder Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***67 | Ring; (Buck Up) | 1 |
| 09***61 | Ring; (Retaining) | 1 |
198-7211 Cylinder Gp-Boom
| 09***19 | Ring, Back-Up | 1 |
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 1 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
296-3249 Cylinder Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***67 | Ring; (Buck Up) | 1 |
| 09***61 | Ring; (Retaining) | 1 |
296-3248 Cylinder Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***67 | Ring; (Buck Up) | 1 |
| 09***61 | Ring; (Retaining) | 1 |
198-7210 Cylinder Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***67 | Ring; (Buck Up) | 1 |
| 09***61 | Ring; (Retaining) | 1 |
185-1738 Cylinder Gp-Bucket
| 18***37 | Cylinder As | 1 |
| 18***38 | Cylinder Group-Bucket | 1 |
| 22***99 | Seal; (Wiper) | 1 |
198-7213 Cylinder Gp-Bucket
| 09***55 | Ring, Back-Up | 1 |
| 09***00 | Ring; (Retaining) | 1 |
| 09***73 | Seal Assem. | 1 |
296-3252 Cylinder Gp-Bucket
| 09***55 | Ring, Back-Up | 1 |
| 09***00 | Ring; (Retaining) | 1 |
| 09***73 | Seal Assem. | 1 |
169-0329 Cylinder Gp-Coupler
| 16***29 | Cylinder Group-Coupler | 1 |
| 16***23 | Kit-Valve; (Quick Coupler)(Lock) | 1 |
| 20***97 | Kit-Seal; (Coupler Cylinder) | 1 |
296-3250 Cylinder Gp-Hydraulic
| 09***19 | Ring, Back-Up | 1 |
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 1 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
144-5970 Cylinder Gp-Offset -Boom Swing
| 11***20 | Seal-O-Ring | 1 |
| 11***31 | Pin | 1 |
| 11***19 | Seal | 1 |
224-9320 Cylinder Gp-Stabilizer
| 11***20 | Seal-O-Ring | 1 |
| 11***16 | Ring | 1 |
| 11***17 | Ring | 2 |
296-3251 Cylinder Gp-Stick
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***67 | Ring; (Buck Up) | 1 |
| 09***61 | Ring; (Retaining) | 1 |
198-7212 Cylinder Gp-Stick
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***67 | Ring; (Buck Up) | 1 |
| 09***61 | Ring; (Retaining) | 1 |
249-1278 Distributor Gp-Swivel
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
| 11***75 | Ring-Split | 1 |
217-5635 Drive Gp-Pump
| 13***28 | Flange | 1 |
| 13***29 | Hub-Clutch | 1 |
| 21***85 | Spring | 1 |
117-7985 Drive Gp-Swing
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***03 | Bolt-Socket Head; (M16x2x35-mm) | 12 |
| 11***85 | Drive Group-Swing | 1 |
152-7375 Drive Gp-Swing
| 08***84 | Washer | 6 |
| 08***85 | Washer | 6 |
| 09***19 | Ring-Retaining | 3 |
8u-0198 Filter Gp-Oil -Hydraulic
| 8U***98 | Filter Group; -Hydraulic | 1 |
| 8U***22 | Holder-Filter | 1 |
| 8U***23 | Filter Element-Oil; (Hydraulic Oil Return) | 1 |
109-7288 Filter Gp-Oil -Hydraulic, Swing Circuit
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 10***89 | Filter Element As-Oil; (Standard Efficiency)(Swing Circuit) | 1 |
| 11***51 | Housing | 1 |
193-5973 Filter Gp-Oil -Hydraulic
| 10***87 | Filter Element-Oil; (Standard Efficiency)(Hydraulic Oil Filter) | 1 |
| 11***04 | Tube | 1 |
| 11***05 | Valve | 1 |
145-7750 Filter Gp-Oil -Hydraulic, Pilot
| 10***89 | Filter Element As-Oil; (Standard Efficiency)(Swing Circuit) | 1 |
| 14***50 | Filter Group-Oil; -Hydraulic, Pilot | 1 |
| 14***46 | Housing | 1 |
125-5387 Fitting Gp-Hydraulic -Quick Disconnect
| 12***87 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 12***41 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 8U***11 | Cap - Protection | 2 |
188-7655 Fitting Gp-Hydraulic
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 4 |
| 18***55 | Fitting Group-Hydraulic | 1 |
| 8U***09 | Cap - Protection | 4 |
163-4210 Fitting Gp-Hydraulic -Quick Disconnect
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 12***41 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 16***10 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
8u-0966 Fitting Gp-Hydraulic -Quick Disconnect
| 09***00 | Seal-O-Ring | 1 |
| 19***26 | Seal-O-Ring | 1 |
| 19***27 | Ring-Backup | 1 |
347-7715 Fitting Gp-Hydraulic -Quick Disconnect
| 34***15 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***66 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***67 | Cap; (Protection)(Pressure) | 1 |
176-6765 Fitting Gp-Hydraulic -Quick Disconnect
| 17***65 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 19***14 | Ring-Backup | 1 |
| 6V***70 | Seal-O-Ring (Id=19.40mm) | 2 |
236-2428 Gauge Gp-Sight
| 23***28 | Gauge Group-Sight; -Hydraulic Oil | 1 |
| 23***89 | Seal-O-Ring | 4 |
| 23***93 | Seal-O-Ring | 4 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
190-8123 Head Gp-Motor
| 12***94 | Plug; (Break Off) | 1 |
| 12***16 | Pin | 1 |
| 12***17 | Plug | 1 |
136-7781 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***28 | Screw | 2 |
212-6808 Hydraulic Ar -Upper
| 18***99 | Pump & Mtg Group-Pilot; -Brake, Steering | 1 |
| 18***75 | Lines Group-Pilot; -Operator | 1 |
| 18***77 | Lines Group-Pilot; -Platform Travel | 1 |
212-6810 Hydraulic Ar-Lower -Lower
| 11***96 | Swivel & Mounting Group | 1 |
| 12***06 | Cylinder & Mtg Group-Axle Lock | 1 |
| 12***58 | Swivel & Mounting Group | 1 |
185-3734 Lines Gp-Auxiliary Hydraulic -Quick Coupler
| 11***24 | Clamp-Single | 2 |
| 11***25 | Clamp-Double | 6 |
| 17***16 | Plate As | 2 |
185-3397 Lines Gp-Auxiliary Hydraulic
| 11***57 | Clamp | 12 |
| 12***43 | Clamp; (8.92mm Id) | 12 |
| 18***97 | Lines Group-Auxiliary Hydraulic | 1 |
185-3677 Lines Gp-Auxiliary Hydraulic -Offset Boom
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 11***24 | Clamp-Single | 5 |
| 13***29 | Clamp-Single | 6 |
185-3403 Lines Gp-Auxiliary Hydraulic
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 6 |
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 6 |
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
185-3675 Lines Gp-Auxiliary Hydraulic -Offset Boom
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 11***57 | Clamp | 6 |
| 12***43 | Clamp; (8.92mm Id) | 6 |
185-3415 Lines Gp-Auxiliary Hydraulic -Variable Adjustable Boom
| 11***24 | Clamp-Single | 2 |
| 11***25 | Clamp-Double | 6 |
| 14***72 | Elbow Group | 1 |
185-3409 Lines Gp-Auxiliary Hydraulic -1 Piece Boom
| 11***24 | Clamp-Single | 4 |
| 11***25 | Clamp-Double | 8 |
| 14***72 | Elbow Group | 1 |
185-3730 Lines Gp-Auxiliary Hydraulic -Quick Coupler
| 11***24 | Clamp-Single | 4 |
| 11***25 | Clamp-Double | 8 |
| 17***16 | Plate As | 2 |
188-7635 Lines Gp-Blade Cylinder
| 14***74 | Elbow As | 4 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
| 18***35 | Lines Group-Blade Cylinder | 1 |
185-3385 Lines Gp-Boom -1 Piece Boom
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 2 |
| 11***57 | Clamp | 6 |
185-3738 Lines Gp-Boom
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 11***24 | Clamp-Single | 5 |
| 11***11 | Clamp | 6 |
235-0759 Lines Gp-Boom -Offset
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 20 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***86 | Clamp-Single | 3 |
185-3391 Lines Gp-Boom -Variable Adjustable
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 26 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
185-3377 Lines Gp-Boom Cylinder
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 8 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 8 |
122-7012 Lines Gp-Bucket Tilt Cylinder
| 11***49 | Fitting; (Quick Disconnect, Male) | 2 |
| 11***54 | Cap | 2 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
185-3432 Lines Gp-Check Valve -Stick Cylinder
| 14***54 | Plate | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***41 | Connector Group | 1 |
185-3428 Lines Gp-Check Valve
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***41 | Connector Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
185-3437 Lines Gp-Check Valve
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
185-3681 Lines Gp-Check Valve
| 14***15 | Connector As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***41 | Connector Group | 1 |
202-4100 Lines Gp-Connecting
| 16***16 | Seal | 1 |
| 17***21 | Adapter As | 2 |
| 19***87 | Hose As | 2 |
188-7645 Lines Gp-Cylinder
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***66 | Hose Assem. | 1 |
| 14***18 | Connector As | 1 |
187-7242 Lines Gp-Front
| 11***86 | Clamp-Single | 4 |
| 14***12 | Guide | 1 |
| 18***42 | Lines Group-Front | 1 |
188-7614 Lines Gp-Hydraulic
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 8 |
| 11***51 | Clamp-Single | 1 |
| 11***23 | Clamp-Single | 2 |
188-7619 Lines Gp-Hydraulic
| 11***51 | Clamp-Single | 2 |
| 11***02 | Clamp-Single | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
188-7624 Lines Gp-Hydraulic
| 14***57 | Union Bulkhead; (Orfs) | 1 |
| 14***52 | Union As | 2 |
| 18***24 | Lines Group-Hydraulic | 1 |
188-7606 Lines Gp-Hydraulic -Blade/Stabilizer
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 14***30 | Connector As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
188-7629 Lines Gp-Hydraulic Fan
| 08***39 | Seal-O-Ring (Id=26.64mm) | 1 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
| 11***24 | Clamp-Single | 1 |
187-7374 Lines Gp-Load Control Valve -Drift Reduction, Var Adj Boom
| 11***53 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
187-7371 Lines Gp-Load Control Valve -Drift Reduction, Stick
| 09***61 | Bolt-Socket Head | 4 |
| 12***33 | Hose As | 1 |
| 13***48 | Hose As | 1 |
187-7372 Lines Gp-Load Control Valve -Drift Reduction, Bucket
| 12***82 | Hose As | 1 |
| 13***48 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
185-3381 Lines Gp-Load Control Valve
| 11***54 | Hose As | 1 |
| 12***74 | Hose As | 1 |
| 14***15 | Connector As | 2 |
187-7370 Lines Gp-Load Control Valve -Drift Reduction, Boom
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 11***54 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
187-7373 Lines Gp-Load Control Valve -Drift Reduction, Stick
| 12***33 | Hose As | 1 |
| 12***57 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
188-4962 Lines Gp-Pilot -Operator, Extension
| 11***24 | Clamp-Single | 1 |
| 11***25 | Clamp-Double | 7 |
| 13***54 | Hose As | 4 |
187-3775 Lines Gp-Pilot -Operator
| 11***34 | Hose As | 1 |
| 11***36 | Hose As | 2 |
| 11***67 | Hose As | 1 |
207-2170 Lines Gp-Pilot -Travel, Extension
| 11***42 | Hose As | 2 |
| 11***77 | Hose As | 1 |
| 13***62 | Hose As | 1 |
187-3777 Lines Gp-Pilot -Platform Travel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***16 | Fitting | 1 |
| 11***89 | Hose As | 1 |
188-4975 Lines Gp-Pilot -Variable Adjustable Extension
| 11***25 | Clamp-Double | 1 |
| 12***32 | Hose As | 2 |
| 16***70 | Connector As | 2 |
188-4976 Lines Gp-Pilot -Hammer, Extension
| 11***25 | Clamp-Double | 1 |
| 12***32 | Hose As | 2 |
| 16***70 | Connector As | 2 |
190-0297 Lines Gp-Pilot -Upper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 2 |
| 10***78 | Union | 1 |
188-7579 Lines Gp-Pilot -Platform, Brake
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
| 11***99 | Nut-Hex; (M33x1.5-Thd) | 2 |
| 11***44 | Hose As | 1 |
188-4964 Lines Gp-Pilot -Brake, Extension
| 11***94 | Hose As | 1 |
| 11***53 | Hose As | 1 |
| 14***83 | Clamp-Single | 2 |
188-4963 Lines Gp-Pilot -Upper, Extension
| 11***77 | Hose As | 1 |
| 16***70 | Connector As | 1 |
| 18***63 | Lines Group-Pilot; -Upper, Extension | 1 |
243-2225 Lines Gp-Pilot -Control Pattern Change
| 11***57 | Hose As | 2 |
| 12***07 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
188-7609 Lines Gp-Pressure Test
| 12***62 | Washer; (19x34x3-mm Thk) | 7 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 7 |
| 13***29 | Hose As; (Charge Pump Discharge Pressure) | 3 |
188-7594 Lines Gp-Pump
| 10***16 | Flange | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***66 | Hose | 1 |
188-7589 Lines Gp-Return
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 11***34 | Hose As | 1 |
| 12***82 | Hose As | 3 |
188-7640 Lines Gp-Stabilizer
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***18 | Connector As | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
188-4967 Lines Gp-Steering -Extension
| 11***11 | Clamp | 1 |
| 13***72 | Hose As | 1 |
| 13***08 | Hose As | 1 |
188-7599 Lines Gp-Steering
| 14***18 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 6 |
185-3447 Lines Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
185-3449 Lines Gp-Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 12 |
| 12***13 | Cover-Flange | 2 |
| 12***96 | Flange-Half | 2 |
185-3446 Lines Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
185-3452 Lines Gp-Stick
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
185-3456 Lines Gp-Stick
| 14***77 | Elbow As. | 2 |
| 14***58 | Union, 90 Deg -6 | 2 |
| 15***99 | Clamp-Single | 2 |
185-3455 Lines Gp-Stick
| 14***77 | Elbow As. | 2 |
| 14***58 | Union, 90 Deg -6 | 2 |
| 15***99 | Clamp-Single | 2 |
185-3453 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
185-3451 Lines Gp-Stick
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
242-1706 Lines Gp-Stick -Material Handler, High Press
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
185-3448 Lines Gp-Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 12 |
| 12***13 | Cover-Flange | 2 |
| 12***96 | Flange-Half | 2 |
185-3445 Lines Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
185-3450 Lines Gp-Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 12 |
| 12***13 | Cover-Flange | 2 |
| 12***96 | Flange-Half | 2 |
185-3454 Lines Gp-Stick
| 14***77 | Elbow As. | 2 |
| 14***58 | Union, 90 Deg -6 | 2 |
| 15***99 | Clamp-Single | 2 |
242-1702 Lines Gp-Stick
| 11***53 | Cap | 2 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 2 |
| 11***24 | Clamp-Single | 6 |
188-7584 Lines Gp-Swing Motor
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 11***54 | Hose As | 2 |
| 14***18 | Connector As | 2 |
210-0696 Manifold Gp-Control
| 12***02 | Screw | 1 |
| 12***12 | Seal-O-Ring | 1 |
| 12***73 | Plug | 1 |
207-2167 Motor & Mtg Gp-Travel
| 20***67 | Motor & Mtg Group-Travel | 1 |
| 21***60 | Motor Group-Piston | 1 |
| 5W***91 | Seal-O-Ring | 1 |
233-1006 Motor Gp-Gear -Hydraulic Fan
| 09***19 | Ring-Retaining | 1 |
| 12***76 | Nut; (M14x1.5-Thd) | 1 |
| 20***60 | Valve Group-Solenoid & Relief; (Hydraulic Fan Motor) | 1 |
233-9571 Motor Gp-Gear -Hydraulic Fan
| 19***58 | Plate | 1 |
| 23***06 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 23***71 | Motor Group-Gear; -Hydraulic Fan | 1 |
211-0060 Motor Gp-Piston
| 03***28 | Seal-O-Ring | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
152-7374 Motor Gp-Swing
| 09***95 | Pin, Dowel | 1 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 6 |
| 15***74 | Motor Group-Swing | 1 |
188-4941 Pump & Mtg Gp-Hydraulic Fan
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 18***41 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 19***28 | Pump Group-Gear; -Hydraulic Fan | 1 |
212-6825 Pump & Mtg Gp-Main Hydraulic
186-0499 Pump & Mtg Gp-Pilot -Brake, Steering
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 2 |
| 18***99 | Pump & Mtg Group-Pilot; -Brake, Steering | 1 |
| 19***24 | Pump Group-Gear; -Auxiliary, Brake, Pilot, Steering | 1 |
196-8428 Pump Gp-Gear -Hydraulic Fan
| 09***61 | Bolt-Socket Head | 4 |
| 11***17 | Dowel | 4 |
| 17***37 | Shim; (3.0-mm Thk) | 4 |
196-8424 Pump Gp-Gear -Aux, Brake, Pilot, Steering
| 11***17 | Dowel | 4 |
| 19***20 | Seal-O-Ring | 1 |
| 19***24 | Pump Group-Gear; -Auxiliary, Brake, Pilot, Steering | 1 |
208-0704 Pump Gp-Gerotor -Basic
| 11***22 | Seal-Ring | 1 |
| 12***76 | Bushing | 1 |
| 12***03 | Spring | 1 |
208-0371 Pump Gp-Gerotor -Charge
| 11***22 | Seal-Ring | 1 |
| 12***83 | Plate As | 1 |
| 20***71 | Pump Group-Gerotor; -Charge | 1 |
207-4713 Pump Gp-Main Hydraulic
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 2 |
| 18***91 | Washer-Hard; (16.4x28x7-mm Thk) | 2 |
| 20***09 | Pump Group-Piston; -Implement, Travel, Work Tool | 1 |
207-4710 Pump Gp-Piston -Swing, Charge
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 10***99 | Plug | 1 |
| 11***26 | Pin | 1 |
207-4709 Pump Gp-Piston -Implement, Travel, Work Tool
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***16 | Pin | 4 |
| 11***18 | Bolt-Socket Head; (M18x2.5-Thd) | 4 |
191-0883 Rotating Gp-Motor
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***29 | Plate-Control | 1 |
| 12***30 | Pin-Center | 1 |
190-8121 Rotating Gp-Motor
| 19***21 | Rotating Group-Motor; -Travel | 1 |
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
157-0422 Rotating Gp-Motor
| 10***11 | Shim; (0.5-mm Thk) | 1 |
| 11***44 | Seal-O-Ring | 1 |
| 13***01 | Cover | 1 |
180-2653 Shaft Gp-Hydraulic Motor
| 09***24 | Ring-Retaining | 1 |
| 18***87 | Kit-Bearing; (Hydraulic Motor) | 1 |
| 18***53 | Shaft Group-Hydraulic Motor | 1 |
191-0886 Shaft Gp-Hydraulic Motor
| 09***29 | Ring; (Retaining) | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 19***55 | Kit-Bearing | 1 |
235-1825 Stabilizer Ar
| 20***65 | Stabilizer Ar | 2 |
| 21***27 | Conversion Ar-Hydraulic | 1 |
| 23***25 | Stabilizer Ar | 1 |
207-0365 Stabilizer Ar
| 18***40 | Lines Group-Stabilizer | 1 |
| 20***65 | Stabilizer Ar | 1 |
| 21***19 | Stabilizer Group | 1 |
187-3796 Steering Column Gp
| 09***85 | Clamp; (Hose) | 2 |
| 12***49 | Nut-Speed | 12 |
| 12***83 | Screw-Pan Head | 12 |
176-5133 Steering Column Gp
| 09***61 | Strap; (Cable) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
126-6758 Swivel & Mounting Gp
| 12***08 | Plate | 1 |
| 12***58 | Swivel & Mounting Group | 1 |
| 24***77 | Swivel Group | 1 |
111-1896 Swivel & Mounting Gp
| 11***28 | Plate | 1 |
| 11***96 | Swivel & Mounting Group | 1 |
| 13***68 | Swivel Group | 1 |
249-1277 Swivel Gp
| 11***93 | Lockwasher | 2 |
| 24***77 | Swivel Group | 1 |
| 24***78 | Distributor Group-Swivel | 1 |
261-0378 Swivel Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Bolt-Socket Head; (M4x0.7x60-mm) | 4 |
111-2015 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 11***38 | Swivel Group | 1 |
| 2Y***81 | Lockwasher | 2 |
139-3369 Swivel Gp
| 12***46 | Lockwasher | 2 |
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 2 |
| 13***69 | Swivel Group | 1 |
8u-5851 Swivel Gp
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 5 |
| 2Y***81 | Lockwasher | 6 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 7 |
139-3368 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 13***68 | Swivel Group | 1 |
| 13***69 | Swivel Group | 1 |
117-1738 Swivel Gp
| 11***38 | Swivel Group | 1 |
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
195-0704 Swivel Gp -Electric
| 09***40 | Seal-O-Ring | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 17***55 | Receptacle As | 1 |
212-6821 Tank & Mtg Gp-Hydraulic
| 19***24 | Switch As-Pressure; (Hydraulic Return Filter, Restriction) | 1 |
| 21***21 | Tank & Mtg Group-Hydraulic | 1 |
| 21***06 | Tank Group-Hydraulic | 1 |
214-9006 Tank Gp-Hydraulic
| 03***92 | Seal; (126.59mm Id) | 1 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
187-7366 Valve & Lines Gp-Auxiliary -Medium Pressure
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 2 |
| 13***85 | Cap | 1 |
| 14***34 | Diode As; (Hydraulic Cab Riser) | 1 |
187-7376 Valve & Lines Gp-Auxiliary -Combined Function
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***34 | Hose As | 1 |
187-7375 Valve & Lines Gp-Auxiliary
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
187-7379 Valve & Lines Gp-Auxiliary -Quick Coupler
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 14***34 | Tee As-Orfs | 1 |
188-4958 Valve & Lines Gp-Auxiliary -Hammer, Extension
| 11***24 | Clamp-Single | 1 |
| 12***32 | Hose As | 1 |
| 16***70 | Connector As | 1 |
187-7378 Valve & Lines Gp-Auxiliary -Hammer
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***71 | Hose As | 1 |
| 11***84 | Clamp | 1 |
185-3441 Valve & Lines Gp-Diverter
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 8 |
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 4 |
187-7205 Valve & Mtg Gp-Control
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 18***05 | Valve & Mtg Group-Control | 1 |
| 19***87 | Bracket As | 1 |
195-2944 Valve & Mtg Gp-Control -Medium Pressure
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 1 |
| 19***44 | Valve & Mtg Group-Control; -Medium Pressure | 1 |
| 19***52 | Valve Group-Control; -Medium Pressure | 1 |
249-5527 Valve Gp-Brake Control
| 11***45 | Lever | 1 |
| 24***27 | Valve Group-Brake Control | 1 |
| 8U***01 | Boot | 1 |
211-0081 Valve Gp-Brake Control
| 17***19 | Orifice | 1 |
| 19***08 | Valve As-Shuttle | 1 |
| 19***10 | Cover | 1 |
176-7800 Valve Gp-Brake Control
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 11***35 | Washer | 1 |
| 11***37 | Screw | 1 |
202-4095 Valve Gp-Check -Boom Cylinder
| 03***21 | Ring-Back-Up | 1 |
| 14***36 | Housing | 1 |
| 14***37 | Housing | 1 |
173-4387 Valve Gp-Check -Boom Cylinder
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***75 | Housing | 1 |
| 11***76 | Retainer-Spring | 2 |
119-9045 Valve Gp-Check -Load Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 11***75 | Housing | 1 |
191-2778 Valve Gp-Combination -Combined Function
| 03***13 | Seal-O-Ring | 2 |
| 06***39 | Seal-O-Ring | 2 |
| 11***07 | Plug Group-Control Valve | 3 |
212-6749 Valve Gp-Combination -Medium Pressure
| 17***80 | Locknut | 1 |
| 21***49 | Valve Group-Combination; -Medium Pressure | 1 |
| 22***82 | Valve Group-Relief; -Line | 1 |
199-1162 Valve Gp-Control -Offset Boom
| 12***12 | Seal-O-Ring | 1 |
| 17***80 | Locknut | 1 |
| 18***04 | Bolt-Socket Head | 2 |
199-1152 Valve Gp-Control -Medium Pressure
| 16***54 | Seal-O-Ring | 5 |
| 19***52 | Valve Group-Control; -Medium Pressure | 1 |
| 20***69 | Valve Group-Solenoid | 2 |
176-9667 Valve Gp-Control -Quick Coupler
| 16***23 | Kit-Valve; (Quick Coupler)(Lock) | 1 |
| 17***77 | Fitting As; (Quick Disconnect, Male) | 1 |
| 17***67 | Valve Group-Control; -Quick Coupler | 1 |
192-3176 Valve Gp-Control -Hydraulic Hammer
| 03***13 | Seal-O-Ring | 1 |
| 06***39 | Seal-O-Ring | 2 |
| 11***07 | Plug Group-Control Valve | 3 |
192-3183 Valve Gp-Control -Variable Adjustable
| 03***13 | Seal-O-Ring | 1 |
| 03***34 | Seal-O-Ring | 1 |
| 06***39 | Seal-O-Ring | 2 |
129-6666 Valve Gp-Diverter
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***96 | Lever | 1 |
| 12***66 | Valve Group-Diverter; -Boom Cyl, Head End | 1 |
171-7016 Valve Gp-Diverter
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***96 | Lever | 1 |
| 13***11 | Shim | 1 |
196-7480 Valve Gp-Flow Control -Fuel Shutoff
| 15***88 | Ring | 1 |
| 15***89 | Washer | 1 |
| 15***37 | Pin-Grooved | 1 |
195-1907 Valve Gp-Flow Control
| 16***54 | Seal-O-Ring | 1 |
| 19***07 | Valve Group-Flow Control | 1 |
202-4094 Valve Gp-Load Control
| 03***21 | Ring-Back-Up | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 14***36 | Housing | 1 |
202-4096 Valve Gp-Load Control -Boom Cylinder
| 03***21 | Ring-Back-Up | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 14***36 | Housing | 1 |
202-4093 Valve Gp-Load Control -Variable Adjustable Boom
| 00***92 | Seal-O-Ring | 1 |
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 2 |
208-5124 Valve Gp-Main Control
| 03***13 | Seal-O-Ring | 1 |
| 03***34 | Seal-O-Ring | 5 |
| 06***39 | Seal-O-Ring | 2 |
197-2248 Valve Gp-Manual
| 11***53 | Handle | 1 |
| 19***48 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
173-7992 Valve Gp-Manual -Auxiliary, Shutoff
| 17***92 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 19***47 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 19***48 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
197-2247 Valve Gp-Manual
| 09***83 | Ring-Back Up | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***47 | Handle | 1 |
190-8653 Valve Gp-Motor Control
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 09***33 | Ring-Retaining | 1 |
| 12***17 | Plug | 1 |
148-7291 Valve Gp-Pilot Relief
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***68 | Rod-Threaded | 1 |
| 12***69 | Spring | 1 |
190-8654 Valve Gp-Press & Flow Cmpnstr
| 08***74 | Nozzle | 1 |
| 12***69 | Plug | 2 |
| 13***57 | Plug | 2 |
224-2983 Valve Gp-Pressure Reducing
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***06 | Ring | 3 |
| 14***00 | Nut-Hex; (M8x1-Thd) | 1 |
221-3103 Valve Gp-Pressure Reducing
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***32 | Lock-Pin | 1 |
| 15***72 | Bolt-Socket Head; (M4x0.07-Thd) | 4 |
199-3057 Valve Gp-Pump Control
| 11***99 | Plug | 1 |
| 11***00 | Piston-Control | 1 |
| 11***04 | Piston-Control | 1 |
139-8929 Valve Gp-Pump Control -Swing
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 1 |
| 13***29 | Valve Group-Pump Control; -Swing | 1 |
| 13***20 | Valve As | 1 |
117-5784 Valve Gp-Pump Control
| 10***93 | Retainer | 2 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 1 |
| 11***09 | Piston-Control | 1 |
214-3916 Valve Gp-Relief -Line, Makeup
| 20***50 | Kit-Seal; (Relief Valve) | 1 |
| 21***16 | Valve Group-Relief; -Line, Makeup | 1 |
177-7122 Valve Gp-Relief
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 16***15 | Retainer-Spring | 1 |
224-2982 Valve Gp-Relief -Line
| 12***57 | Ring | 1 |
| 12***93 | Ring | 1 |
| 22***82 | Valve Group-Relief; -Line | 1 |
236-8008 Valve Gp-Relief -Pilot
| 12***94 | Bolt | 1 |
| 12***96 | Washer | 1 |
| 12***97 | Spring | 1 |
142-3952 Valve Gp-Relief -Line, Medium Pressure
| 12***94 | Bolt | 2 |
| 12***96 | Washer | 2 |
| 12***97 | Spring | 2 |
126-5675 Valve Gp-Relief -Steering High Pressure Cutoff
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 12***75 | Valve Group-Relief; -Steering High Pressure Cutoff | 1 |
| 12***81 | Plug | 1 |
191-3952 Valve Gp-Relief -Travel Brake
| 19***52 | Valve Group-Relief; -Crossover-Counterbalance | 1 |
| 3E***66 | Seal-O-Ring | 1 |
126-5674 Valve Gp-Relief -Crossover
| 11***19 | Ring-Backup | 1 |
| 12***74 | Valve Group-Relief; -Crossover | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
205-8069 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***76 | Ring-Backup | 1 |
| 14***77 | Ring-Backup | 1 |
196-7544 Valve Gp-Solenoid
| 17***77 | Seal-O-Ring | 1 |
| 17***28 | Cover | 1 |
| 17***70 | Seal-O-Ring | 1 |
199-1153 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***76 | Ring-Backup | 1 |
| 14***77 | Ring-Backup | 1 |
214-3915 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***30 | Kit-Seal; (Solenoid Valve)(Generator Solenoid Valve) | 1 |
214-3914 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***30 | Kit-Seal; (Solenoid Valve)(Generator Solenoid Valve) | 1 |
202-4725 Valve Gp-Solenoid
| 12***75 | Body | 1 |
| 16***54 | Seal-O-Ring | 4 |
| 18***66 | Body-Valve | 1 |
208-7751 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***72 | Bolt-Socket Head; (M4x0.07-Thd) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
196-7543 Valve Gp-Solenoid
| 17***77 | Seal-O-Ring | 1 |
| 17***28 | Cover | 1 |
| 17***70 | Seal-O-Ring | 1 |
196-7486 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***76 | Ring-Backup | 1 |
| 14***77 | Ring-Backup | 1 |
Implements
194-9315 Boom Ar
| 18***77 | Lines Group-Boom Cylinder | 1 |
| 18***85 | Lines Group-Boom; -1 Piece Boom | 1 |
| 18***19 | Lines Group-Grease | 1 |
207-2158 Boom Ar-Offset
| 18***77 | Lines Group-Boom Cylinder | 1 |
| 18***94 | Mirror Group; -Rear View, Side View | 1 |
| 18***75 | Valve & Lines Group-Auxiliary | 1 |
194-9324 Boom Ar-Variable Adjustable -Variable Adjustable
| 18***77 | Lines Group-Boom Cylinder | 1 |
| 18***91 | Lines Group-Boom; -Variable Adjustable | 1 |
| 18***23 | Lines Group-Grease; -Variable Adjustable | 1 |
194-9314 Boom Gp-1 Piece
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
194-9319 Boom Gp-Fore
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
242-8900 Boom Gp-Offset
| 08***55 | Spacer; (93x130x8-mm Thk) | 1 |
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
194-9323 Boom Gp-Stub
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 1 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
185-3419 Lines Gp-Grease
| 11***29 | Tube As | 3 |
| 11***30 | Fitting-Adapter | 11 |
| 11***31 | Fitting-Coupler | 14 |
238-0896 Lines Gp-Grease
| 11***30 | Fitting-Adapter | 4 |
| 11***31 | Fitting-Coupler | 4 |
| 11***34 | Fitting-Straight | 4 |
235-0760 Lines Gp-Grease -Offset Boom
| 11***29 | Tube As | 1 |
| 11***30 | Fitting-Adapter | 20 |
| 11***31 | Fitting-Coupler | 22 |
185-3423 Lines Gp-Grease -Variable Adjustable
| 11***29 | Tube As | 1 |
| 11***30 | Fitting-Adapter | 17 |
| 11***31 | Fitting-Coupler | 18 |
194-9349 Linkage Ar-Bucket
| 19***37 | Linkage Group-Bucket | 1 |
| 19***49 | Linkage Ar-Bucket | 1 |
| 19***57 | Cylinder & Seal Group-Bucket | 1 |
194-9348 Linkage Ar-Bucket
| 18***41 | Valve & Lines Group-Diverter | 1 |
| 19***37 | Linkage Group-Bucket | 1 |
| 19***48 | Linkage Ar-Bucket | 1 |
122-7007 Linkage Ar-Bucket
| 12***07 | Linkage Ar-Bucket | 1 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
| 12***14 | Pin Group-Excavator | 1 |
128-6184 Linkage Ar-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
| 12***14 | Pin Group-Excavator | 1 |
253-5631 Linkage Gp-Bucket
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 3 |
| 09***42 | Seal Bkt To Stk & Link | 2 |
193-4537 Linkage Gp-Bucket
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 3 |
| 09***42 | Seal Bkt To Stk & Link | 2 |
224-3861 Lock Gp-Transport
| 11***13 | Hook As-Rh | 1 |
| 11***14 | Hook As-Lh | 1 |
| 22***60 | Bracket As | 1 |
123-4967 Pin Gp-Excavator
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 11***35 | Pin As | 2 |
| 12***67 | Pin Group-Excavator | 1 |
122-7014 Pin Gp-Excavator
| 12***59 | Pin As | 1 |
| 12***62 | Pin | 1 |
| 12***14 | Pin Group-Excavator | 1 |
123-4968 Pin Gp-Excavator
228-6195 Pin Gp-Excavator
| 22***78 | Pin As | 2 |
| 22***95 | Pin Group-Excavator | 1 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 2 |
111-1919 Restraint Gp-Travel
| 11***19 | Restraint Group-Travel | 1 |
| 11***39 | Bracket As | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
212-6819 Stabilizer Gp
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 11***97 | Pin-Lh | 1 |
| 11***98 | Pin-Rh | 1 |
194-9342 Stick Ar
| 18***47 | Lines Group-Stick | 1 |
| 19***40 | Stick Group-Hoe | 1 |
| 19***42 | Stick Ar | 1 |
194-9331 Stick Ar
| 18***45 | Lines Group-Stick | 1 |
| 19***30 | Stick Group-Hoe; -Short | 1 |
| 19***31 | Stick Ar | 1 |
194-9336 Stick Ar
| 18***46 | Lines Group-Stick | 1 |
| 19***35 | Stick Group-Hoe | 1 |
| 19***36 | Stick Ar | 1 |
235-1829 Stick Ar-Material Handling
| 23***29 | Stick Ar-Material Handling | 1 |
| 24***02 | Lines Group-Stick | 1 |
| 24***06 | Lines Group-Stick; -Material Handler, High Press | 1 |
194-9335 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
194-9330 Stick Gp-Hoe -Short
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
242-2942 Stick Gp-Hoe
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***18 | Shim; (2-mm Thk) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
194-9340 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
142-7433 Valve Gp-Lube Distribution
| 13***42 | Fitting | 11 |
| 13***43 | Ring | 11 |
| 13***44 | Bolt; (M10x1x12mm) | 1 |
142-7434 Valve Gp-Lube Distribution
| 13***42 | Fitting | 7 |
| 13***43 | Ring | 7 |
| 13***44 | Bolt; (M10x1x12mm) | 1 |
Lubrication System
225-7942 Filter Gp-Engine Oil
| 1R***01 | Filter Element As-Engine Oil | 1 |
| 22***39 | Housing As | 1 |
| 22***42 | Filter Group-Engine Oil | 1 |
232-7378 Filter Gp-Engine Oil
| 23***78 | Filter Group-Engine Oil | 1 |
| 7W***26 | Filter As-Engine Oil | 1 |
230-7578 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 23***78 | Pump Group-Engine Oil | 1 |
Machine Arrangement
212-6805 Chassis Ar
| 11***85 | Drive Group-Swing | 1 |
| 18***84 | Horn Group-Electric | 1 |
| 18***85 | Box Group-Junction | 1 |
186-0513 General Ar
| 18***13 | General Ar | 1 |
| 18***99 | Engine Ar-Primary | 1 |
| 21***05 | Chassis Ar | 1 |
223-5782 Roading Ar
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
227-2947 Roading Ar -Italian
| 22***46 | Plate & Film Group; -Italian | 1 |
| 22***47 | Roading Ar; -Italian | 1 |
| 22***15 | Lighting Group-Roading | 1 |
243-2599 Roading Ar -German
| 18***48 | Lighting Group-Roading; -Stick | 1 |
| 23***19 | Wedge Group-Wheel | 1 |
| 24***99 | Roading Ar; -German | 1 |
190-0283 Roading Ar -German
| 09***61 | Strap; (Cable) | 10 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
223-5781 Roading Ar
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 15***95 | Film-Identification; (Roading Height) | 1 |
Operator Station
198-4685 Air Conditioner & Mounting Gp
| 16***83 | Sensor As; (Sunlight For Air Conditioner) | 1 |
| 19***85 | Air Conditioner & Mounting Group | 1 |
| 19***86 | Air Conditioner Group | 1 |
210-1339 Air Conditioner Gp
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
| 11***40 | Clamp | 2 |
| 16***95 | Strap; (Cable) | 7 |
198-4686 Air Conditioner Gp
| 19***86 | Air Conditioner Group | 1 |
| 20***44 | Angle | 1 |
| 21***32 | Duct As | 1 |
196-1120 Armrest Gp -Lh
| 19***14 | Adjuster As | 1 |
| 19***20 | Armrest Group; -Lh | 1 |
| 19***21 | Armrest As | 1 |
196-1118 Armrest Gp -Rh
| 19***14 | Adjuster As | 1 |
| 19***18 | Armrest Group; -Rh | 1 |
| 19***19 | Armrest As | 1 |
187-3800 Cab Ar
| 18***19 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 18***70 | Monitor & Mtg Group-Operator | 1 |
219-8500 Cab Ar -Front Window, 1-Piece
| 20***60 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 21***95 | Window Group-Cab; -Front Window, 1-Piece | 1 |
| 21***00 | Cab Ar; -Front Window, 1-Piece | 1 |
188-4959 Cab Gp -Lexan
| 18***19 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 18***70 | Monitor & Mtg Group-Operator | 1 |
201-8750 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 4 |
| 10***70 | Grommet | 1 |
217-2810 Coil Gp-Evaporator
| 09***55 | Washer, Tooth | 1 |
| 12***42 | Seal-O-Ring | 1 |
| 12***44 | Seal-O-Ring | 1 |
3e-1906 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
186-0512 Compressor Gp-Refrigerant
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 12***42 | Seal-O-Ring | 1 |
| 12***44 | Seal-O-Ring | 1 |
198-4684 Condenser & Mtg Gp-Refrigerant
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 15***53 | Boss | 4 |
| 19***66 | Bracket As | 2 |
217-3086 Condenser Gp-Refrigerant
| 12***45 | Seal-O-Ring | 1 |
| 19***51 | Clamp As | 1 |
| 19***83 | Accumulator As; (Refrigerant) | 1 |
187-3767 Console Gp-Operator -Lh
| 08***35 | Clevis | 1 |
| 08***36 | Spring Pin | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
187-3797 Console Gp-Operator
| 12***83 | Screw-Pan Head | 1 |
| 18***67 | Console Group-Operator; -Lh | 1 |
| 18***82 | Console Group-Operator; -Rh | 1 |
187-3782 Console Gp-Operator -Rh
| 12***83 | Screw-Pan Head | 1 |
| 18***72 | Support As | 1 |
| 18***82 | Console Group-Operator; -Rh | 1 |
193-7789 Control Gp-Hydraulic Hand -Blade, Stabilizer
| 11***81 | Plate | 1 |
| 11***84 | Handle | 1 |
| 13***32 | Kit-Spring; (Pilot Valve) | 1 |
112-5699 Control Gp-Hydraulic Pedal -Travel
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
| 11***19 | Setscrew | 1 |
112-5704 Control Gp-Hydraulic Pedal
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***19 | Setscrew | 1 |
222-6205 Control Gp-Joystick
| 12***04 | Plate | 1 |
| 12***05 | Bellows | 1 |
| 13***06 | Control Group-Handle; (Joystick) | 1 |
243-7058 Control Gp-Monitor
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
188-4972 Control Gp-Pedal
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
187-3793 Control Gp-Pilot Operated Hyd
| 18***93 | Control Group-Pilot Operated Hydraulic | 1 |
| 19***89 | Control Group-Hydraulic Hand; -Blade, Stabilizer | 1 |
| 22***05 | Control Group-Joystick | 2 |
219-8494 Cover Gp-Access -Cab Storage
| 21***94 | Cover Group-Access; -Cab Storage | 1 |
125-4903 Cover Gp-Cab Riser
| 12***03 | Cover Group-Cab Riser | 1 |
| 13***71 | Plate As | 1 |
| 5W***19 | Washer; (9.8x18.5x1.5-mm Thk)(9.8x18.5x1.5-mm Thk) | 8 |
197-5700 Cover Gp-Console
| 09***39 | Rivet | 4 |
| 13***39 | Nut; (U-Type Retainer) | 2 |
| 15***64 | Cover | 1 |
189-2768 Door & Mtg Gp-Cab
| 13***00 | Door Group-Cab | 1 |
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
201-8770 Door & Mtg Gp-Cab -Lexan Polycarbonate Windows
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
| 20***70 | Door & Mtg Group-Cab; -Lexan Polycarbonate Windows | 1 |
205-0450 Door Gp-Cab -Lexan Polycarbonate Windows
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 09***84 | Nut-Spring | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
139-7100 Door Gp-Cab
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 09***72 | Nut | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
210-1338 Duct Gp-Cab Air
| 16***92 | Duct As | 1 |
| 16***18 | Insulation; (Upper) | 1 |
| 16***19 | Insulation; (Upper) | 1 |
188-4938 Guard Ar-Overhead
| 18***38 | Guard Ar-Overhead | 1 |
| 18***47 | Lighting Group-Flood; -Rear | 1 |
| 19***59 | Guard Group-Overhead | 1 |
194-3259 Guard Gp-Overhead
| 19***53 | Guard As | 1 |
| 19***59 | Guard Group-Overhead | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
188-4940 Guard Gp-Vandalism
| 11***21 | Seal; (85-cm Each) | 0 |
| 18***40 | Guard Group-Vandalism | 1 |
| 19***88 | Bracket | 1 |
213-4640 Guard Gp-Window
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
| 19***52 | Bracket As | 1 |
193-7800 Headrest As-Seat
| 19***00 | Headrest As-Seat | 1 |
186-0484 Horn Gp-Electric
| 10***92 | Receptacle As-Connector; (License Plate) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 17***53 | Receptacle As; (2-Pin) | 1 |
188-4943 Installation Gp-Radio
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 13***27 | Converter As; (24-Volt) | 1 |
188-4974 Lines Gp-Air Conditioner -Extension
| 12***42 | Seal-O-Ring | 2 |
| 12***45 | Seal-O-Ring | 2 |
| 13***02 | Connector | 1 |
198-4687 Lines Gp-Air Conditioner
| 09***61 | Strap; (Cable) | 2 |
| 12***42 | Seal-O-Ring | 2 |
| 12***44 | Seal-O-Ring | 2 |
188-4965 Lines Gp-Heater -Extension
| 12***81 | Pipe | 2 |
| 18***65 | Lines Group-Heater; -Extension | 1 |
| 3E***21 | Clip | 1 |
186-0496 Lines Gp-Heater
| 18***96 | Lines Group-Heater | 1 |
| 23***14 | Clamp-Spring | 4 |
| 3E***21 | Clip | 1 |
186-0494 Mirror Gp -Rear View, Side View
| 12***94 | Plug | 1 |
| 12***11 | Spacer; (3x15x17-mm Thk) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
196-9732 Mirror Gp -Rear View, Side View
| 12***94 | Plug | 1 |
| 12***11 | Spacer; (3x15x17-mm Thk) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
187-3770 Monitor & Mtg Gp-Operator
| 18***70 | Monitor & Mtg Group-Operator | 1 |
| 20***67 | Service Group-Monitor | 1 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
187-3801 Mounting Gp-Cab
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 13***39 | Nut; (U-Type Retainer) | 2 |
| 15***68 | Cover | 1 |
198-4680 Operator Ar
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 18***96 | Lines Group-Heater | 1 |
| 18***80 | Platform Group-Operator | 1 |
160-1501 Pedal Gp-Brake
| 09***16 | Ring-Retaining | 1 |
| 09***23 | Ring-Retaining; (External) | 2 |
| 11***45 | Retainer-Spring | 1 |
187-3780 Platform Gp-Operator
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 11***90 | Ring | 1 |
| 12***28 | Pin As | 1 |
196-7485 Radio Gp -Am/Fm
| 09***61 | Strap; (Cable) | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
188-4960 Riser Ar-Cab -Fixed
| 15***56 | Cover-Protection | 1 |
| 18***60 | Riser Ar-Cab; -Fixed | 1 |
| 18***61 | Frame Group-Cab Riser | 1 |
184-7621 Screen Gp-Sun
| 18***21 | Screen Group-Sun | 1 |
| 22***56 | Support | 1 |
| 22***57 | Support | 1 |
8y-4031 Seat Belt Gp
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
| 8Y***30 | Seat Belt Group (For Outside Japan); Belt Gp-Seat (No Serviceable Parts) | 1 |
205-6214 Seat Belt Gp
| 20***14 | Seat Belt Group | 1 |
| 8Y***31 | Seat Belt Group | 1 |
187-3781 Seat Gp
| 18***81 | Seat Group | 1 |
| 20***10 | Cushion As-Backrest, Name-Plate (Type Of Machine) | 1 |
| 20***11 | Suspension Group-Seat | 1 |
187-3785 Seat Gp
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 18***81 | Seat Group | 1 |
| 18***85 | Seat Group | 1 |
195-7700 Seat Gp-Suspension
| 19***00 | Seat Group-Suspension | 1 |
| 20***13 | Suspension Group-Seat; -Air | 1 |
| 20***30 | Bearing | 1 |
190-0288 Seat Gp-Suspension
| 19***88 | Seat Group-Suspension | 1 |
| 19***00 | Seat Group-Suspension | 1 |
205-3967 Service Gp-Monitor
| 20***67 | Service Group-Monitor | 1 |
| 26***96 | Service Group-Monitor | 1 |
| 31***37 | Software Group-Monitor | 1 |
262-6996 Service Gp-Monitor
| 24***58 | Control Group-Monitor | 1 |
| 26***96 | Service Group-Monitor | 1 |
187-3791 Support Gp-Seat
| 18***79 | Support As-Seat | 1 |
| 18***91 | Support Group-Seat | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
202-7211 Suspension Gp-Seat
| 20***11 | Suspension Group-Seat | 1 |
| 20***11 | Kit-Plate; (Suspension Seat) | 1 |
| 20***13 | Plate-Upper | 1 |
202-7213 Suspension Gp-Seat
| 20***13 | Suspension Group-Seat; -Air | 1 |
| 20***12 | Kit-Adjuster; (Suspension Seat)(Seat Suspension) | 1 |
| 20***29 | Stop-Adjuster | 1 |
189-6117 Visor Gp-Cab
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 14***18 | Nut; (M6x1-Thd) | 4 |
| 16***95 | Visor | 1 |
201-8760 Window Gp-Cab -Sides, Top, Back
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 13***14 | Hammer Group | 1 |
| 15***89 | Glass; (Rh) | 1 |
167-4060 Window Gp-Cab -Front Window, 50/50-Split
| 16***60 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 18 |
219-8495 Window Gp-Cab -Front Window, 1-Piece
| 16***64 | Glass; (Front) | 1 |
| 16***83 | Bracket | 6 |
| 16***84 | Clip | 1 |
201-8765 Window Gp-Cab -Sides, Top, Back
| 09***61 | Strap; (Cable) | 1 |
| 14***50 | Ring-Pull | 1 |
| 16***67 | Glass; (Top) | 1 |
189-2053 Window Gp-Cab -Front Window, 50/50-Split
| 10***86 | Bolt-Socket Head; (M6x1x50-mm) | 4 |
| 13***74 | Bolt-Socket Head; (M5x0.8x20-mm) | 8 |
| 16***60 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
184-7619 Window Gp-Cab -Front Window, 50/50-Split
| 18***19 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***53 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 18***54 | Switch As; (Cab Window Limit) | 1 |
151-6792 Window Gp-Door
| 14***03 | Kit-Catch; (Window) | 1 |
| 15***92 | Window Group-Door; (Door) | 1 |
| 21***34 | Kit-Seal; (Window) | 1 |
205-0442 Window Gp-Door -Lexan Polycarbonate
| 14***03 | Kit-Catch; (Window) | 1 |
| 20***42 | Window Group-Door; -Lexan Polycarbonate | 1 |
| 20***46 | Kit-Window; (Polycarbonate)(Cab Door, Front) | 1 |
205-0460 Wiper Gp-Window -Front Window, 1-Piece
| 12***27 | Hose; (100-cm) | 2 |
| 19***99 | Plate As | 1 |
| 19***90 | Motor As | 1 |
190-0290 Wiper Gp-Window -Front Window, 50/50-Split
| 12***27 | Hose; (100-cm) | 0 |
| 19***90 | Wiper Group-Window; -Front Window, 50/50-Split | 1 |
| 19***99 | Plate As | 1 |
Power Train
124-2920 Axle & Mtg Ar-Front
| 11***70 | Pin | 1 |
| 11***30 | Plate As | 2 |
| 12***20 | Axle & Mtg Ar-Front | 1 |
212-6823 Axle & Mtg Ar-Rear
| 13***18 | Fitting Group-Tube | 2 |
| 13***82 | Adapter | 2 |
| 21***23 | Axle & Mtg Rear Axle | 1 |
212-6824 Axle & Mtg Ar-Rear
| 13***82 | Adapter | 2 |
| 13***52 | Hose As | 2 |
| 17***56 | Axle & Transmission Ar | 1 |
233-8740 Axle & Transmission Ar
| 23***40 | Axle & Transmission Ar | 1 |
| 23***41 | Axle Group-Rear | 1 |
| 23***45 | Transmission Group | 1 |
175-6557 Axle & Transmission Ar
| 13***12 | Axle Rear Axle | 1 |
| 17***57 | Axle & Transmission Ar | 1 |
| 17***58 | Transmission Group | 1 |
175-6556 Axle & Transmission Ar
| 12***28 | Axle Rear Axle | 1 |
| 17***56 | Axle & Transmission Ar | 1 |
| 17***58 | Transmission Group | 1 |
233-8735 Axle & Transmission Ar
| 23***35 | Axle & Transmission Ar | 1 |
| 23***36 | Axle Group-Rear | 1 |
| 23***45 | Transmission Group | 1 |
124-2921 Axle Ar-Front
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
123-9728 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
131-3112 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
233-8741 Axle Gp-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
233-8736 Axle Gp-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
233-8730 Axle Gp-Steering
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
158-6333 Brake Gp-Drum
| 12***50 | Shoe-Brake | 2 |
| 12***51 | Bolt | 2 |
| 12***52 | Plate | 1 |
212-6807 Power Train Ar
| 11***66 | Tire & Rim Ar | 1 |
| 12***20 | Axle & Mtg Ar-Front | 1 |
| 20***54 | Shaft Group-Drive | 1 |
8u-6723 Ring Gp-Tire
| 32***49 | Ring-Tire | 4 |
| 8U***23 | Ring Group-Tire | 1 |
8u-6725 Ring Gp-Tire
| 8U***24 | Ring-Tire | 4 |
| 8U***25 | Ring Group-Tire | 1 |
207-2154 Shaft Gp-Drive
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 11***15 | Universal Joint Group | 1 |
| 11***42 | Bolt; (M10x1x35-mm) | 16 |
110-6135 Shaft Gp-Drive -Carrier Bearing
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 23***63 | Housing-Brake | 1 |
| 5W***16 | Shaft | 1 |
111-1999 Tire & Rim Ar
| 11***99 | Tire & Rim Ar | 1 |
| 11***07 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
265-9250 Tire & Rim Ar
| 22***74 | Extension As-Air | 4 |
| 26***50 | Tire & Rim Ar | 1 |
| 26***51 | Tire & Rim Group | 8 |
144-0685 Tire & Rim Ar
| 14***85 | Tire & Rim Ar | 1 |
| 14***88 | Tire & Rim Group | 4 |
262-6195 Tire & Rim Ar
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
| 21***56 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
123-3879 Tire & Rim Ar
| 12***79 | Tire & Rim Ar | 1 |
| 12***10 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-2003 Tire & Rim Ar
| 11***03 | Tire & Rim Ar | 1 |
| 11***11 | Tire & Rim Group | 8 |
224-3190 Tire & Rim Ar
| 12***76 | Washer; (19x30x8-mm Thk) | 2 |
| 12***02 | Ring-Guide | 2 |
| 21***56 | Tire & Rim Group | 8 |
113-1866 Tire & Rim Ar
| 11***04 | Tire & Rim Group | 8 |
| 11***66 | Tire & Rim Ar | 1 |
| 22***74 | Extension As-Air | 4 |
125-9671 Tire & Rim Ar
| 12***71 | Tire & Rim Ar | 1 |
| 12***72 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
262-6190 Tire & Rim Ar
| 22***74 | Extension As-Air | 4 |
| 26***90 | Tire & Rim Ar | 1 |
| 26***91 | Tire & Rim Group | 8 |
144-5174 Tire & Rim Ar
| 11***09 | Tire & Rim Group | 4 |
| 12***29 | Plate As | 2 |
| 14***74 | Tire & Rim Ar | 1 |
265-9255 Tire & Rim Ar
| 22***73 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
| 25***37 | Plate | 2 |
144-0688 Tire & Rim Gp
| 14***69 | Rim As-Wheel | 1 |
| 14***88 | Tire & Rim Group | 1 |
| 14***89 | Tire; (600/40-22.5) | 1 |
224-6473 Tire & Rim Gp
| 22***73 | Tire & Rim Group | 1 |
| 22***79 | Tire; (11.00-20) | 1 |
| 22***80 | Rim As-Wheel | 1 |
124-2910 Tire & Rim Gp
| 12***10 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2011 Tire & Rim Gp
| 11***11 | Tire & Rim Group | 1 |
| 24***71 | Rim As | 1 |
| 5W***52 | Tire-Solid; (10-20) | 1 |
111-2007 Tire & Rim Gp
| 11***07 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2009 Tire & Rim Gp
| 11***09 | Tire & Rim Group | 1 |
| 15***62 | Rim As-Wheel | 1 |
| 5W***36 | Tire-18r-19,5 Xf | 1 |
111-2004 Tire & Rim Gp
| 11***04 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
219-9856 Tire & Rim Gp
| 21***53 | Tire; (10-20) | 1 |
| 21***56 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
262-6191 Tire & Rim Gp
| 22***75 | Rim As | 1 |
| 26***91 | Tire & Rim Group | 1 |
| 26***92 | Tire; (10-20) | 1 |
265-9251 Tire & Rim Gp
| 22***75 | Rim As | 1 |
| 26***51 | Tire & Rim Group | 1 |
| 26***52 | Tire; (10-20) | 1 |
125-9672 Tire & Rim Gp
| 12***72 | Tire & Rim Group | 1 |
| 12***56 | Tire; (10-20) | 1 |
| 22***75 | Rim As | 1 |
175-6558 Transmission Gp
| 09***17 | Ring-Retaining | 3 |
| 09***34 | Ring-Retaining; (Internal) | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
233-8745 Transmission Gp
| 09***17 | Ring-Retaining | 3 |
| 09***34 | Ring-Retaining; (Internal) | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
112-5015 Universal Joint Gp
| 11***15 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
121-7657 Universal Joint Gp
| 12***47 | Universal Joint As | 1 |
| 12***48 | Universal Joint | 1 |
| 12***57 | Universal Joint Group | 1 |
121-5940 Universal Joint Gp
| 12***40 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
235-8319 Wedge Gp-Wheel
| 13***41 | Bracket As | 2 |
| 13***32 | Plate | 2 |
| 13***33 | Band-Rubber | 2 |
Service Equipment And Supplies
252-9368 Plate & Film Gp -Slovakian
| 25***84 | Film-Warning; (Engine Speed Control) | 1 |
| 25***89 | Film-Notice; (Oscillating Axle) | 1 |
| 25***95 | Film-Warning; (Direction Control) | 1 |
252-9365 Plate & Film Gp -Latvian
| 25***81 | Film-Warning; (Engine Speed Control) | 1 |
| 25***87 | Film-Notice; (Oscillating Axle) | 1 |
| 25***93 | Film-Warning; (Direction Control) | 1 |
246-9181 Plate & Film Gp -Norwegian
| 10***47 | Film-Warning; (Engine Speed Control) | 1 |
| 12***31 | Film-Warning; (Direction Control)(Boom Over Rear Axle) | 1 |
| 12***34 | Film-Notice; (Oscillating Axle) | 1 |
246-9185 Plate & Film Gp -Spanish
| 16***25 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***38 | Film; (Pressure Tap) | 1 |
| 24***85 | Plate & Film Group; -Spanish | 1 |
246-9187 Plate & Film Gp -Turkish
| 18***02 | Film-Warning; (Engine Speed Control) | 1 |
| 18***03 | Film-Notice; (Oscillating Axle) | 1 |
| 18***04 | Film-Warning; (Boom Over Rear Axle) | 1 |
188-4983 Plate & Film Gp -Greek
| 16***30 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***83 | Plate & Film Group; -Greek | 1 |
| 20***33 | Film-Identification; (Pressure Tap) | 1 |
246-9180 Plate & Film Gp -Italian
| 16***27 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***34 | Film-Identification; (Pressure Tap) | 1 |
| 24***80 | Plate & Film Group; -Italian | 1 |
188-4986 Plate & Film Gp -Portuguese
| 16***28 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***86 | Plate & Film Group; -Portuguese | 1 |
| 20***36 | Film-Identification; (Pressure Tap) | 1 |
246-9182 Plate & Film Gp -Portuguese
| 16***28 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***36 | Film-Identification; (Pressure Tap) | 1 |
| 24***82 | Plate & Film Group; -Portuguese | 1 |
246-9170 Plate & Film Gp -English
| 16***23 | Film; (Universal, Read Omm) | 1 |
| 20***59 | Film-Identification; (Pressure Tap) | 1 |
| 24***70 | Plate & Film Group; -English | 1 |
246-9186 Plate & Film Gp -Swedish
| 10***63 | Film-Warning; (Engine Speed Control) | 1 |
| 10***67 | Film-Instruction; (Hydraulic Oil Level) | 1 |
| 11***55 | Film-Identification; (Environmental Configuration)(German Only) | 2 |
246-9174 Plate & Film Gp -Finnish
| 10***48 | Film-Warning; (Engine Speed Control) | 1 |
| 12***96 | Film-Warning; (Direction Control)(Boom Over Rear Axle) | 1 |
| 12***98 | Film-Notice; (Oscillating Axle) | 1 |
246-9172 Plate & Film Gp -Danish
| 16***31 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***28 | Film-Identification; (Pressure Tap) | 1 |
| 24***72 | Plate & Film Group; -Danish | 1 |
246-9183 Plate & Film Gp -Russian
| 11***81 | Film-Warning; (Engine Speed Control) | 1 |
| 12***39 | Film-Notice; (Boom, Stick Removal) | 1 |
| 12***45 | Film-Warning; (Boom Over Rear Axle) | 1 |
246-9171 Plate & Film Gp -German
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 11***60 | Film-Warning; (Engine)(German) | 1 |
| 11***55 | Film-Identification; (Environmental Configuration)(German Only) | 2 |
198-0859 Plate & Film Gp -Russian
188-4988 Plate & Film Gp -Swedish
188-4977 Plate & Film Gp -English
| 16***23 | Film; (Universal, Read Omm) | 1 |
| 18***77 | Plate & Film Group; -English | 1 |
| 20***59 | Film-Identification; (Pressure Tap) | 1 |
188-4979 Plate & Film Gp -Danish
| 16***31 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***79 | Plate & Film Group; -Danish | 1 |
| 20***28 | Film-Identification; (Pressure Tap) | 1 |
188-4978 Plate & Film Gp -Finnish
| 10***48 | Film-Warning; (Engine Speed Control) | 1 |
| 12***96 | Film-Warning; (Direction Control)(Boom Over Rear Axle) | 1 |
| 12***98 | Film-Notice; (Oscillating Axle) | 1 |
227-2946 Plate & Film Gp -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 12***31 | Plate As | 1 |
246-9176 Plate & Film Gp -French
| 16***24 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***31 | Film-Identification; (Pressure Tap) | 1 |
| 24***76 | Plate & Film Group; -French | 1 |
188-4982 Plate & Film Gp -German
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 11***60 | Film-Warning; (Engine)(German) | 1 |
| 11***55 | Film-Identification; (Environmental Configuration)(German Only) | 2 |
188-4980 Plate & Film Gp -Dutch
| 16***29 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***80 | Plate & Film Group; -Dutch | 1 |
| 20***29 | Film-Identification; (Pressure Tap) | 1 |
252-9364 Plate & Film Gp -Hungarian
| 25***14 | Film-Warning; (Engine Speed Control) | 1 |
| 25***19 | Film-Notice; (Oscillating Axle) | 1 |
| 25***22 | Film-Warning; (Direction Control) | 1 |
252-9369 Plate & Film Gp -Slovenian
| 25***82 | Film-Warning; (Engine Speed Control) | 1 |
| 25***88 | Film-Notice; (Oscillating Axle) | 1 |
| 25***94 | Film-Warning; (Direction Control) | 1 |
188-4987 Plate & Film Gp -Spanish
| 16***25 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***87 | Plate & Film Group; -Spanish | 1 |
| 20***38 | Film; (Pressure Tap) | 1 |
252-9366 Plate & Film Gp -Lithuanian
| 25***80 | Film-Warning; (Engine Speed Control) | 1 |
| 25***86 | Film-Notice; (Oscillating Axle) | 1 |
| 25***92 | Film-Warning; (Direction Control) | 1 |
212-6826 Plate & Film Gp
| 11***65 | Plate-Instruction; (Air Conditioner)(A/C) | 1 |
| 11***42 | Film-Warning; (Battery/Jump Start) | 1 |
| 11***49 | Film-Instruction; (Swing Lock)(Lock Pin) | 1 |
252-9363 Plate & Film Gp -Estonian
| 25***79 | Film-Warning; (Engine Speed Control) | 1 |
| 25***85 | Film-Notice; (Oscillating Axle) | 1 |
| 25***90 | Film-Warning; (Direction Control) | 1 |
188-4984 Plate & Film Gp -Italian
| 16***27 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***84 | Plate & Film Group; -Italian | 1 |
| 20***34 | Film-Identification; (Pressure Tap) | 1 |
188-4981 Plate & Film Gp -French
| 16***24 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 18***81 | Plate & Film Group; -French | 1 |
| 20***31 | Film-Identification; (Pressure Tap) | 1 |
188-4985 Plate & Film Gp -Norwegian
| 10***47 | Film-Warning; (Engine Speed Control) | 1 |
| 12***31 | Film-Warning; (Direction Control)(Boom Over Rear Axle) | 1 |
| 12***34 | Film-Notice; (Oscillating Axle) | 1 |
198-0860 Plate & Film Gp -Turkish
| 18***02 | Film-Warning; (Engine Speed Control) | 1 |
| 18***03 | Film-Notice; (Oscillating Axle) | 1 |
| 18***04 | Film-Warning; (Boom Over Rear Axle) | 1 |
252-9361 Plate & Film Gp -Czech
| 25***13 | Film-Warning; (Engine Speed Control) | 1 |
| 25***17 | Film-Notice; (Oscillating Axle) | 1 |
| 25***21 | Film-Warning; (Direction Control) | 1 |
246-9177 Plate & Film Gp -Greek
| 16***30 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***33 | Film-Identification; (Pressure Tap) | 1 |
| 24***77 | Plate & Film Group; -Greek | 1 |
252-9367 Plate & Film Gp -Polish
| 25***16 | Film-Warning; (Engine Speed Control) | 1 |
| 25***20 | Film-Notice; (Oscillating Axle) | 1 |
| 25***23 | Film-Warning; (Direction Control) | 1 |
246-9173 Plate & Film Gp -Dutch
| 16***29 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 20***29 | Film-Identification; (Pressure Tap) | 1 |
| 24***73 | Plate & Film Group; -Dutch | 1 |
Undercarriage
212-6806 Frame Ar-Undercarriage
| 20***56 | Step Group-Tool Box | 1 |
| 20***57 | Step Group | 1 |
| 21***06 | Frame Ar-Undercarriage | 1 |
212-6817 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 20***31 | Frame As-Undercarriage | 1 |
Work Tools
106-6757 Adjuster Gp-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 10***65 | Shim (1.0mm Thick) | 6 |
| 10***66 | Shim (0.5mm Thick) | 4 |
207-0362 Blade & Mounting Gp
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 10***58 | Bulldozer As | 1 |
| 10***68 | Bracket As | 2 |
207-0361 Blade Ar
| 18***35 | Lines Group-Blade Cylinder | 1 |
| 20***61 | Blade Ar | 1 |
| 20***62 | Blade & Mounting Group | 1 |
226-8968 Bucket & Adjuster Gp -Extreme Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***56 | Edge As | 1 |
226-8953 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 4 |
| 22***52 | Edge As | 1 |
226-8962 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***55 | Edge As | 1 |
226-8965 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***56 | Edge As | 1 |
226-8959 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 22***54 | Edge As | 1 |
226-8956 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 22***53 | Edge As | 1 |
226-8950 Bucket & Adjuster Gp -Excavation
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 3 |
| 22***50 | Bucket & Adjuster Group; -Excavation | 1 |
132-1266 Bucket & Bearing As
| 12***85 | Edge-Cutting | 1 |
| 13***62 | Bucket As-Ditch Cleaning | 1 |
| 13***77 | Plate-Wear | 6 |
226-8954 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 4 |
| 22***52 | Edge As | 1 |
| 22***54 | Bucket Group-Excavation; -Quick Coupler | 1 |
226-8958 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 22***53 | Edge As | 1 |
| 22***72 | Plate | 1 |
226-8951 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 3 |
| 22***51 | Bucket Group-Excavation; -Quick Coupler | 1 |
| 23***01 | Plate-Wear | 6 |
226-8963 Bucket Gp-Excavation -Wide Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***55 | Edge As | 1 |
| 22***80 | Plate-Wear | 6 |
226-8966 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***56 | Edge As | 1 |
| 22***29 | Plate-Wear | 6 |
226-8960 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 22***54 | Edge As | 1 |
| 22***78 | Plate | 1 |
226-8967 Bucket Gp-Excavation -Narrow Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***56 | Edge As | 1 |
| 22***29 | Plate-Wear | 6 |
226-8964 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***55 | Edge As | 1 |
| 22***80 | Plate-Wear | 6 |
226-8957 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 22***53 | Edge As | 1 |
| 22***72 | Plate | 1 |
226-8955 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 4 |
| 22***52 | Edge As | 1 |
| 22***66 | Plate | 1 |
226-8952 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 3 |
| 22***52 | Bucket Group-Excavation; -Quick Coupler | 1 |
| 23***01 | Plate-Wear | 6 |
226-8949 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 3 |
| 22***49 | Bucket Group-Excavation; -Quick Coupler | 1 |
| 23***05 | Edge As | 1 |
226-8961 Bucket Gp-Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 22***54 | Edge As | 1 |
| 22***78 | Plate | 1 |
226-8970 Bucket Gp-Extreme Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***56 | Edge As | 1 |
| 22***82 | Plate-Wear | 6 |
226-8969 Bucket Gp-Extreme Excavation -Quick Coupler
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 22***56 | Edge As | 1 |
| 22***82 | Plate-Wear | 6 |
174-5654 Coupler Ar-Quick -Mechanical
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
174-2522 Coupler Ar-Quick
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
174-2496 Coupler Ar-Quick
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
174-2523 Coupler Ar-Quick -Mechanical
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
173-9956 Hook Gp-Lifting
| 17***56 | Hook Group-Lifting; -10-Ton Capacity | 1 |
| 17***70 | Kit-Latch; (Quick Coupler) | 1 |
169-0327 Lock Gp-Quick Coupler -Hydraulic
| 09***03 | Bolt-Socket Head; (M16x2x75-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***40 | Wedge | 1 |
171-3690 Lock Gp-Quick Coupler -Mechanical
| 09***48 | Nipple, Grease | 2 |
| 09***93 | Clamp-Hose | 1 |
| 09***85 | Clamp; (Hose) | 1 |
171-3689 Lock Gp-Quick Coupler -Mechanical
| 09***48 | Nipple, Grease | 2 |
| 09***93 | Clamp-Hose | 1 |
| 09***85 | Clamp; (Hose) | 1 |
169-0701 Lock Gp-Quick Coupler -Hydraulic
| 09***03 | Bolt-Socket Head; (M16x2x75-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 09***69 | Bolt | 2 |
3g-3237 Tip Gp-Penetration
| 10***08 | Pin-G.E.T. | 1 |
| 3G***37 | Tip Group; -J-300 | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3751 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 8E***51 | Tip Group-Long; -J-300, Heavy-Duty | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3750 Tip Gp-Long -J-250
| 8E***50 | Tip Group-Long; -J-250 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3169 Tip Gp-Long -J-250
| 1U***52 | Tip (Long) | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3167 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
100-6462 Tip Gp-Penetration
| 10***62 | Tip Group-Penetration; -J-250 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3178 Tip Gp-Short -J-250
| 1U***51 | Tip (Short) | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3175 Tip Gp-Short
| 10***08 | Pin-G.E.T. | 1 |
| 1U***01 | Tip ( Short ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
M313C serial number reference
The PIN plate on the M313C is riveted to the upper frame at the base of the cab, near the cab entry step on the right-hand side, the same general spot used on Cat's crawler excavators of this era. The plate reads as an 8-character PIN; the first 3 characters are the prefix identifying the plant and production block, followed by a sequential unit number (for example BDR02458). Quote the full prefix plus number when ordering parts or pulling a service manual, since the prefix alone only narrows the build era.
| Prefix | Identifies | Notes |
|---|---|---|
| BDR | M313C wheeled excavator, Germany-built early run | Runs BDR00001-up. Powered by Cat 3054E DIT ATAAC diesel (net power approx. 88 kW / 118 hp). Dealer/reseller spec sheets tie this prefix to German production, roughly 2003 into 2005. |
| H2A | M313C wheeled excavator, France-built later run | Runs H2A00001-up. Same Cat 3054E DIT ATAAC diesel as the BDR-prefix build. Dealer/reseller spec sheets tie this prefix to French production, roughly 2005 into 2007, following on from the BDR run. |
Frequently asked questions
What engine does the Caterpillar M313C use?
A Cat 3054E DIT ATAAC diesel: a turbocharged, air-to-air aftercooled four-cylinder rated around 83-88 kW (111-120 hp) net depending on boom configuration, meeting Tier 2 / Stage II emissions standards.
What is the operating weight of the Caterpillar M313C?
Operating weight runs roughly 13,100 to 14,750 kg (about 28,900 to 32,500 lb), varying with boom type (Mono vs VA/VAH), stick length, and outrigger or blade setup.
What replaced the Caterpillar M313C?
The Caterpillar M313D, produced from 2007, replaced it. The M313D uses the more powerful Cat C4.4 ACERT engine (roughly 95-102 kW / 127-137 hp) to meet Stage IIIA emissions rules, with a higher operating-weight range.
What M313C owners discuss
Owners report the M313C losing travel power over time. What's usually behind it?
Creeping travel speed or weak pull in one or both directions on this wheeled-excavator drivetrain usually traces to one of three things: main hydraulic pump calibration drifting out of spec, wear in the travel motor, or worn clutch packs in the range-shift transmission. Recalibrating the main pump through Cat ET clears a good share of these complaints. If pressure at the travel motor test port still falls off under load after recalibration, the motor or pump itself is worn internally and needs a shop teardown. Because this affects on-road travel and braking response, have your dealer verify pump and motor pressures before returning the machine to road use.
What engine quirks show up on the M313C compared to later wheeled excavators in this line?
The M313C runs the Cat 3054E DIT ATAAC, a mechanically governed engine rather than a fully electronic one, so there's no fault code to point you at hard starting or an idle rpm that hunts up and down. The most common cause reported is air trapped in the low-pressure fuel circuit: a loose filter base, a perished lift-pump hose, or a filter change that wasn't bled properly. Bleeding the low-pressure side after any fuel-system work usually settles it. Separately, the air-to-air aftercooler core sits ahead of the radiator and packs with dust and debris on demolition or quarry work; a dirty core shows up as power loss and dark exhaust smoke under load well before any warning light does, since this generation predates the heavier onboard diagnostics of the later C4.4-powered model.
What undercarriage or wear pattern is typical for the M313C, given it rides on wheels rather than tracks?
Being a wheeled machine, the M313C wears tires and steering components rather than track chain and rollers. Foam-filled tires are a common choice for demolition and scrap-yard work because they resist punctures, but they run heavier and transmit more shock into the axle and frame over time. Pneumatic tires ride softer and are lighter but need daily pressure checks; under-inflation is a frequent cause of premature edge wear on these machines. Uneven wear across the front axle is also a common tell for a steering geometry or axle-oscillation fault rather than plain tire age.
How does the oscillating front axle behave, and what goes wrong with it?
The front axle oscillates to keep all wheels on the ground over rough terrain while traveling, then locks automatically once the machine stops and sets up to dig, so the frame stays stable through swing and lifting. Reported complaints fall into two buckets: the axle failing to unlock for travel, which makes the ride feel stiff and rough over bumps, or failing to lock for digging, which lets the frame rock under load. Both point to the oscillation lock cylinder or its control valve rather than the axle itself. Because this system is what keeps the machine stable while digging, have your dealer verify lock engagement before working near an edge or on uneven ground.
What's the first sign of swing bearing wear on the M313C, and how is it checked?
Backlash or a knock when starting and stopping swing is the usual first sign of swing bearing wear on this platform. The standard field check is a feeler gauge between the upper and lower bearing races at the 12, 3, 6 and 9 o'clock positions; a gap much beyond about 0.20 mm (0.008 in) is considered excessive and means bearing replacement is coming. The swing bearing and front-attachment grease points share one lubrication block in the engine compartment, so a machine with a neglected grease schedule tends to show bearing and pin wear together, and this bearing design carried forward into the later C4.4-powered generation largely unchanged. Swing bearing integrity is a load-carrying, safety-relevant item. Have your dealer verify bearing play before relying on the machine for lifting or working near people.
Is there a known electrical or sensor issue on the M313C worth knowing about?
A cab blower that comes on briefly after being switched on, then slows to almost nothing, is a documented complaint on this machine. The blower motor itself tests fine on direct battery power; the fault sits in the speed-control circuit feeding it, where voltage at the blower connector collapses from full voltage down to only a few volts once the motor draws current. That points to a failing driver/resistor stage rather than a bad motor. It's a comfort item, not a safety item, but a degraded driver circuit on one cab accessory is a reasonable prompt to have the rest of the cab wiring and connectors looked at.
What should I check before buying a used M313C?
Run the main pump calibration through Cat ET and load the travel circuit to confirm pressure holds steady, since weak travel power is a known complaint on this drivetrain. Check tire type and wear pattern, foam-filled versus pneumatic, and look for uneven wear that points to a steering or axle-oscillation fault. Feel for backlash when starting and stopping swing, and gauge bearing play if you can, since this generation's swing bearing wears the same way as its later C4.4-powered successor. Inspect the aftercooler core and radiator for packed debris, since that shows up as power loss before any warning light on this pre-electronic engine. Walk the boom, stick, and outrigger or blade pins and cylinders for play and leaks, and confirm the axle oscillation lock engages and releases correctly. None of this replaces a proper pre-purchase inspection. Have your dealer verify hydraulic pressures, swing bearing play, and structural welds before you close the deal.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific M313C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.