Caterpillarexcavator
Caterpillar M312
Maintenance schedule, common problems & OEM parts breakdown
The Cat M312 is a rubber-tired (wheeled) hydraulic excavator built for road-adjacent digging, utility, and light civil work, where a wheeled undercarriage's mobility and pavement-friendly footprint matter more than a tracked machine's stability. It runs a Cat 3054 series four-cylinder diesel, most commonly the turbocharged variant rated around 84 kW (113 hp) gross, and falls in the 13-15 metric ton (roughly 29,000-33,000 lb) operating weight class depending on boom style, axle/outrigger configuration, and counterweight fitted. Caterpillar built the M312 from the mid-1990s through the mid-2000s as part of its first-generation M-series wheeled excavator line, offered with either a one-piece (monoblock) boom or a two-piece variable-reach boom, and with a choice of undercarriage stabilization: blade front with outriggers rear, outriggers front with blade rear, or outriggers front and rear. An oscillating front axle and hydrostatic travel drive to both axles round out the base machine. The M312 sat at the entry point of Cat's wheeled-excavator range, below the larger M313/M314/M315 models, and was replaced directly by the M313C.
Across its production run the M312 carried the emissions-tier changes affecting the 3054 engine family, and dealers and rental fleets spec'd it with different boom and undercarriage combinations for pipeline, utility, and municipal work, so quoted weights and outputs vary more by configuration than by model year. Caterpillar replaced the M312 with the M313C, then the M313D with a Cat C4.4 engine, moving the wheeled-excavator line onto later-generation power and electronics. Today the M312 mostly circulates as a used, budget-tier utility excavator. Sale values are low, the mechanically governed 3054 driveline is straightforward to service, and parts support for the engine, axles, and hydraulics remains workable through the wider 3054/3056 engine family and general Cat wheel-excavator parts channels, even though direct-model listings are thin. It remains a common pick for shops wanting an inexpensive, simple, road-legal digging machine over late-model electronics.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar M312 specifications
Engine
| Engine model | Cat 3054TA, four-cylinder diesel, turbocharged and aftercooled |
| Gross power | 87 kW (117 hp) |
| Net/flywheel power | 84 kW (113 hp) |
| Displacement | 3.99 L (243.5 cu in) |
| Cylinders | 4, inline |
| Emissions | Built to meet the EU Non-Road Mobile Machinery Directive 97/68/EC and the equivalent US EPA Non-Road standards current for its 1996-2007 production run. Exact tier/step is not separately published and can vary by build year and serial range. |
Weights
| Operating weight (standard config) | approx. 14.0 t / 13,999 kg (30,868 lb). Some listings round this to about 13.7 t. |
| Ground pressure | Not applicable/published. The M312 rides on a wheeled (tire) undercarriage, so a track ground-pressure figure is not part of the factory spec sheet. |
| Transport weight | Not separately documented from operating weight; use the operating weight figure for transport planning. |
Dimensions
| Transport length | 8.61 m (28 ft 3 in) |
| Transport width (travel) | 2.49 m (8 ft 2 in) |
| Width, outriggers extended | 3.84 m (12 ft 7 in) |
| Height to cab top | 3.07 m (10 ft 1 in) |
| Wheelbase | 2.50 m (8 ft 2 in) |
| Ground clearance | 0.38 m (1 ft 3 in) |
| Upper structure/counterweight clearance | 1.26 m (4 ft 2 in) |
| Tail swing / turning radius | Not consistently documented across sources. An outside turning radius of roughly 16.4 m appears in some secondary listings but is not confirmed on the factory spec sheet -- verify with a dealer for the exact figure. |
Performance
| Max dig depth | 5.42-5.64 m (17 ft 9 in-18 ft 6 in), varies with one-piece vs two-piece (variable-angle) boom |
| Max reach at ground level | 8.60-8.90 m (28 ft 2 in-29 ft 2 in) |
| Max dump/loading height | approx. 6.19 m (20 ft 4 in) for one documented boom/stick combination; can vary with configuration |
| Max cutting height | 7.88-8.55 m (25 ft 10 in-28 ft 1 in) |
| Swing speed | Not published as an rpm figure. The swing circuit is rated for a maximum flow of about 80 L/min (21.1 gpm) through a dedicated variable-displacement swing pump and fixed-displacement swing motor. |
| Travel speed | High range approx. 34 km/h (21.1 mph); low/creeper range approx. 16 km/h (9.9 mph) |
| Gradeability | 61% maximum |
| Drawbar pull | approx. 69.6 kN (15,642 lbf) |
Forces
| Bucket digging force | approx. 80 kN (17,980 lbf) |
| Stick/arm digging force | approx. 48 kN (10,790 lbf). Only one stick length is documented across sources; no separate long-stick figure was found. |
Service capacities (summary)
| Fuel tank | 230 L (60.8 US gal) |
| Hydraulic system, total | 180 L (47.6 US gal) |
| Hydraulic tank refill | 95 L (25.1 US gal) |
| Engine oil (crankcase) | 9 L (2.4 US gal) |
| Cooling system | 35 L (9.3 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
M312 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | approx. 9.1 L (2.4 US gal) per the M312 refill chart; the 3054 engine family this machine uses commonly specs closer to 9.5 L (2.5 US gal) with a full filter change - treat as a 9.1-9.5 L range | Cat DEO diesel engine oil. SAE 15W-40 for temperate ambient (roughly -9C to 50C / 15F to 122F). SAE 10W-30 for cooler ambient (-18C to 40C / 0F to 104F). Cat DEO Cold Weather (0W-40) below -18C for arctic starts. |
| Cooling system | 35.2 L (9.3 US gal) | Cat ELC (Extended Life Coolant), factory premix 50/50 ethylene-glycol and water, good to roughly -37C (-34F). Cat DEAC is the accepted alternate on machines still running a DEAC service fill; do not mix ELC and DEAC in the same system. |
| Fuel tank | 230 L (60.8 US gal) | No. 2-D ultra-low-sulfur diesel meeting Cat's fuel specification. Switch to a winterized or No. 1-D blend below freezing to avoid fuel gelling and filter plugging. |
| Hydraulic system, total (including tank) | 180 L (47.6 US gal) | Cat HYDO (Advanced) multigrade hydraulic oil, selected by ambient climate - see hydraulic tank row for grade split. |
| Hydraulic tank (reservoir) | 95 L (25.1 US gal) | Cat HYDO Advanced 10 (roughly ISO VG 32-46) for cold-to-moderate climates. Cat HYDO Advanced 30 (roughly ISO VG 68) for sustained hot climates above about 40C (104F) ambient. |
| Powershift (travel) transmission | 3.0 L (0.8 US gal) | Cat TDTO (TO-4 spec) drive-train oil. SAE 30 for standard ambient; SAE 10W in cold weather; Cat TDTO-TMS multi-season grade covers roughly -20C to 40C (-4F to 104F) where wide swings are expected. |
| Front steering axle differential | 7.2 L (1.9 US gal) | Cat TDTO (TO-4 spec), same grade selection as the transmission fill. |
| Rear axle housing (differential) | 11.4 L (3.0 US gal) | Cat TDTO (TO-4 spec), same grade selection as the transmission fill. |
| Swing drive | Not published as a standalone refill figure on the M312 service chart. This wheeled excavator's spec sheet lists axle/transmission fills but no separate swing-drive oil volume, so the slew reduction is most likely grease-packed rather than an oil-filled housing on this machine - confirm against the unit's own OMM or with a Cat dealer before servicing. | If the unit is found to have an oil-filled swing housing, use Cat TDTO (TO-4 spec) matching the drivetrain fill. If grease-packed, service through the swing-bearing and pinion grease points listed below. |
| Grease (spec only) | Service item - no refill volume, applied at grease fittings | Cat Multipurpose Grease (NLGI 2) for routine pin, bushing, and swing-bearing/pinion points. Cat Advanced 3Moly Grease for heavily loaded linkage and bucket pins where extra extreme-pressure protection is wanted. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar M312 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the M312 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil-sampling on the 3054 engine, axle differentials, and swing drive at every scheduled drain; on a machine this age, wear trends matter more than factory defaults. Watch engine oil for coolant intrusion, a known weak point on 3054 wet-liner blocks, and check hydraulic oil for water and metal fines since original seals and hoses are past their service life on most survivors. Track coolant condition closely, because neglected coolant accelerates liner cavitation in this engine.
Corrective & Common Repairs
Common M312 repairs center on the 3054 turbocharger (boost leaks, bearing wear) and injectors after years of service, plus hydraulic cylinder seal leaks at the boom, stick, and bucket pins from age-hardened seals. On the wheeled undercarriage, check front axle king pins, oscillation bushings, and steering cylinders for play; these wear faster than on a tracked machine and directly affect digging stability. Swing bearing bolt torque and gear backlash are frequent used-market complaints, so inspect both before buying or after hard-use history.
Overhaul & Rebuild Points
At major overhaul, expect the 3054 to need a top-end rebuild (liners, pistons, cylinder head) given typical hours and age on surviving units. Hydraulic pumps and travel or swing motors are common rebuild candidates once flow output drops below spec. Axle differentials and planetary final drives should be inspected and rebuilt if oil analysis shows rising metal content, since they carry both propel and steering loads on a wheeled machine. Also check boom, stick, and frame welds for fatigue cracking before returning the machine to hard service.
Seasonal & Environment Servicing
Before winter, treat fuel against gelling and confirm coolant protection for the 3054's wet-liner block; a block heater helps cold starts on these older, mechanically-injected engines. Check tire pressure more often as temperatures swing, since this is a wheeled, not tracked, machine and pressure affects both stability and steering feel. In hot or dusty environments, clean the radiator and hydraulic oil cooler cores often, since the turbocharged 3054 runs hotter under boost, and service air filters more frequently on dusty utility sites.
M312 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 138-3098 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 156-9017 | Filter Ar-Air | Air intake service | Check fitment → |
| 145-4086 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
M312 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Low Transmission Clutch Pressure / Parking Brake (indicator lamp) | Parking brake is applied, or transmission clutch charge pressure has dropped below the level needed to keep the brake released. | Weak or discharged transmission/brake accumulator, worn charge pump, plugged transmission filter, or a faulty pressure switch. | Check accumulator precharge and clutch pressure with test gauges before condemning the pump; if no test equipment is on hand, start by inspecting and replacing the transmission filter. |
| Engine Coolant Temperature High (warning lamp) | Coolant temperature has risen above the normal operating range. | Low coolant level, blocked radiator core, slipping or failed fan drive, or a faulty temperature sender. | Shut down and allow the engine to cool, check coolant level and radiator fins, verify fan operation, then confirm the reading with a manual gauge before further diagnosis. |
| Hydraulic Oil Temperature High (warning lamp) | Hydraulic tank oil temperature has exceeded the normal operating range. | Low hydraulic oil level, clogged oil cooler fins, worn cooler fan drive, or sustained relief-valve bypass/pump wear generating excess heat. | Idle down and let the system cool, check oil level and clean the cooler, then check pump and relief valve condition if overheating repeats under normal load. |
| Engine Oil Pressure Low (warning lamp) | Engine oil pressure has dropped below the minimum safe threshold. | Low oil level, worn oil pump, plugged suction screen or filter, or a failed pressure sender/switch. | Shut the engine down immediately, check oil level and condition, inspect the filter, then verify with a mechanical test gauge before restarting. |
| Alternator / Charging System (warning lamp) | Charging system voltage is out of range and the battery is not being charged. | Worn or slipping alternator belt, failed alternator, or loose/corroded charging wiring. | Check belt tension and wiring connections first, then load-test the alternator and batteries. |
| Governor Actuator Fault (electronic control system) | The machine's electronic control system detects a mismatch between the commanded governor actuator position and its feedback signal, or an open/short in the actuator circuit. | Worn or failed governor actuator motor, damaged actuator linkage, or a chafed or corroded harness connector. | Recalibrate the governor actuator through the electronic control system's calibration procedure; if the fault returns, check harness continuity and actuator motor resistance before replacing the actuator. |
| Two-Speed Travel Shift Fault (high/low travel range) | Travel drive stays locked in one speed range or drops into a reduced-speed condition regardless of the travel speed selector. | A stuck or burnt travel-speed solenoid, both high- and low-speed solenoids energized at once, or a failed selector switch or relay. | Confirm steady battery voltage to the solenoids with the key on, check for a solenoid stuck energized, and swap solenoids to isolate a bad unit before replacing the controller. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
M312 attachments & work tools
Buckets
Pin-on GD and HD buckets from about 0.24-0.86 m³ (8.5-30 ft³) fit the M312's boom/stick linkage, in widths from roughly 450mm to 1.8m (18-70in). Standard general-purpose and trenching buckets run 65mm pins; heavy-duty and rock buckets step up to 80mm pins. Exact width/capacity combination depends on GP vs HD vs rock profile, so match against a linkage chart before ordering.
Hydraulic hammers
At roughly 13.7t (30,200 lb) operating weight, the M312 sits in the Cat H100-H110 hammer class (medium-flow circuit, service weight in the 600-900 kg / 1,300-2,000 lb band). Cat's hammer compatibility charts explicitly group the 311/312/314/315/316 excavator range under the H110, so any breaker sized for a 10-15t (11-16.5 US ton) carrier lines up with the M312's aux-hydraulic circuit and pin spacing.
Quick couplers
The 312-linkage pin grabber coupler is the standard coupler type for this size class - mechanical or hydraulic pin-grabber style, roughly 380mm machine-side by 210mm tool-side interface width, with a lifting-eye rating around 9-11t (10 US tons). Wedge-style couplers are not common at this weight class; pin-grabber is the typical factory and aftermarket fit.
Thumbs / grapples
Pin-on and pin-grabber hydraulic thumbs (3 to 5 tooth, progressive-link style) built on the shared 311/312/313/314 bucket-pin bore (65mm main pin) bolt directly to the M312 stick without linkage changes. Rotating demolition and sorting grapples sized for the same 310-316 class (roughly 10-50 rpm rotation speed) also fit this pin bore for scrap, brush, and general material handling.
Rippers
A single-shank pin-on ripper (about 50mm/2in shank thickness, roughly 1.05m/42in overall length, 65mm pin) is offered for the shared 311/312/313/314 linkage, mainly for frost, root, and light-rock breaking. This is a light pin-on shank rather than a dedicated dozer-class ripper, and is not a common factory work tool ordered with this machine.
Hydraulic-kit notes
Cat offered a factory hammer-line option on the M312: a single-acting, high-pressure circuit with a dedicated proportional foot pedal for breaker control, and a one-piece boom is the recommended configuration for hammer work. The main valve stack can take up to four added hydraulic functions, so a thumb, coupler, or grapple-rotate circuit (lower-pressure, return-to-tank plumbing) can be added alongside the hammer line. Confirm actual valve and line count against the specific machine, since hydraulic packages varied across the production run.
All M312 assemblies by section
Every catalogued assembly group for the Caterpillar M312. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
127-8270 Aftercooler Gp-Water
| 10***14 | Stud | 1 |
| 10***15 | Bolt, Cover | 1 |
| 10***45 | Bolt; (M5x0.8x10-mm) | 2 |
117-7951 Air Cleaner Gp
| 10***55 | Hose (400 cm) | 0 |
| 11***51 | Air Cleaner Group | 1 |
| 11***05 | Bracket | 1 |
122-8036 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 12***36 | Air Cleaner Group | 1 |
114-2378 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 11***78 | Manifold Group-Exhaust | 1 |
| 11***79 | Manifold-Exhaust | 1 |
253-4363 Muffler-Converter
| 25***63 | Muffler & Converter Group | 1 |
117-7952 Muffler Gp
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 11***64 | Clamp As-Muffler | 2 |
| 11***23 | Pipe As-Exhaust | 1 |
127-2930 Turbocharger Gp
| 06***69 | Olive-Fuel Tube | 2 |
| 10***03 | Nut; (Spiralock M8-Thd) | 4 |
| 10***90 | Union | 1 |
127-2929 Turbocharger Gp
| 12***29 | Turbocharger Group | 1 |
| 13***73 | Ring | 1 |
| 13***74 | Seal-O-Ring | 1 |
Basic Engine
130-7738 Adapter Gp-Auxiliary Drive
| 08***72 | Plug-O-Ring | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 2 |
| 11***68 | Pin | 2 |
159-1464 Adapter Gp-Auxiliary Drive
| 08***72 | Plug-O-Ring | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 2 |
| 11***68 | Pin | 2 |
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 13***30 | Camshaft | 1 |
133-9361 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 12***43 | Cover As-Valve Mechanism | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
127-3324 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 06***10 | Washer | 1 |
| 06***09 | Plug-Facing | 1 |
127-3325 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
123-3285 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
130-1503 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
150-8683 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
123-0863 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 11***76 | Pin | 1 |
| 12***63 | Drive Group-Accessory | 1 |
148-7147 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 11***76 | Pin | 1 |
| 14***47 | Adapter | 1 |
127-3296 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 11***30 | V-Belt Set; (Includes 2-Belts)(Fan Drive) | 1 |
100-6321 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***21 | Flywheel Group | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
101-3613 Housing Gp-Flywheel
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
| 10***17 | Plug | 3 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
123-2897 Lifting Gp-Engine
| 11***59 | Bolt; (M10x1.5x35-mm) | 2 |
| 12***97 | Lifting Group-Engine | 1 |
| 12***98 | Plate | 2 |
121-2626 Mounting Gp-Engine
| 11***07 | Mount As-Engine | 1 |
| 11***08 | Mount As-Engine | 1 |
| 12***26 | Mounting Group-Engine | 1 |
141-6135 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
124-3534 Piston & Rod Gp
| 12***24 | Piston As; (Grade F) | 4 |
| 12***25 | Piston As; (Grade G) | 4 |
| 12***26 | Piston As; (Grade H) | 4 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
135-2838 Pulley Gp-Fan & Alt Drive
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 1 |
| 12***87 | Adapter | 1 |
| 13***28 | Spacer | 1 |
135-3000 Suppression Gp-Sound
| 11***51 | Film-Stripe; (98 cm) | 0 |
| 13***00 | Suppression Group-Sound | 1 |
| 13***29 | Clamp-Single | 1 |
120-8844 Suppression Gp-Sound
| 12***69 | Liner | 6 |
| 12***43 | Plate As | 1 |
| 12***19 | Plate As | 1 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
Cooling System
127-3356 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***13 | Adapter | 1 |
| 10***23 | Plate | 1 |
127-2837 Lines Gp-Water
| 06***58 | Clamp-Hose | 2 |
| 12***34 | Hose | 1 |
| 12***35 | Connector | 1 |
127-3302 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 11***70 | Stud | 3 |
| 12***01 | Pump Group-Water | 1 |
127-3301 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 12***01 | Pump Group-Water | 1 |
| 6I***43 | Gear; (18-Teeth) | 1 |
124-8977 Radiator & Hyd Oil Cooler Gp
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 11***99 | Switch As-Temperature; (Power Mode Limiter) | 1 |
| 11***01 | Sender-Temperature; (Engine Coolant) | 1 |
117-7942 Radiator & Hyd Oil Cooler Gp
| 11***42 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 12***60 | Cooler-Water | 1 |
| 12***61 | Cooler-Oil | 1 |
144-5980 Radiator & Hyd Oil Cooler Gp
| 12***40 | Hose; (16cm Each) | 0 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***53 | Cooler As-Oil, Cap, Cap; Lid | 1 |
150-3363 Screen Gp-Radiator
| 14***08 | Grid As | 1 |
| 14***09 | Grid As | 1 |
| 15***63 | Screen Group-Radiator | 1 |
130-4523 Valve Gp-Radiator Drain
| 11***07 | Fitting-Tube | 1 |
| 11***09 | Valve As-Shutoff | 1 |
| 13***22 | Fitting | 1 |
Electrical And Starting System
111-1914 Alarm Gp-Travel
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***14 | Alarm Group-Travel | 1 |
| 11***38 | Reducer | 2 |
147-9527 Alternator Gp-Charging
| 04***00 | Washer | 1 |
| 06***66 | Washer | 1 |
| 10***62 | Alternator Group-Charging | 1 |
123-9718 Battery & Wiring Gp
| 09***10 | Clamp | 2 |
| 09***61 | Strap; (Cable) | 20 |
| 11***15 | Grommet | 1 |
117-7993 Box Gp-Junction
| 09***92 | Clip | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***61 | Strap; (Cable) | 0 |
132-6640 Control Gp-Secondary Steering
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***40 | Control Group-Secondary Steering | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 4 |
140-6617 Diode Gp
| 14***17 | Diode Group | 1 |
| 14***18 | Diode As | 1 |
| 14***19 | Heat Sink | 1 |
111-1979 Lamp Gp-Head
| 11***79 | Lamp Group-Head | 1 |
| 11***19 | Lamp As; (Headlight) | 2 |
| 12***53 | Lockwasher | 2 |
116-9625 Lamp Gp-Rear
| 11***25 | Lamp Group-Rear | 1 |
| 11***20 | Glass As; (Rear Lamp) | 1 |
| 11***70 | Screw-Special | 2 |
111-1980 Lamp Gp-Rear
| 11***80 | Lamp Group-Rear | 1 |
| 11***25 | Lamp Group-Rear | 2 |
| 5W***40 | Lamp; (24-Volt, 5-Watt)(Rear Lamp) | 2 |
111-1924 Lamp Gp-Registration
| 11***24 | Lamp Group-Registration | 1 |
| 11***28 | Plate As | 1 |
| 11***23 | Lamp As | 2 |
116-9626 Lamp Gp-Signal -Front
| 11***26 | Lamp Group-Signal; -Front | 1 |
| 11***18 | Glass As; (Front Signal Lamp) | 1 |
| 11***69 | Screw | 1 |
111-1978 Lamp Gp-Signal
| 11***78 | Lamp Group-Signal | 1 |
| 11***24 | Lamp Group-Signal | 2 |
| 6V***10 | Screw; (Machine) (M4x0.7x10mm) | 4 |
111-1981 Lamp Gp-Signal
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 11***81 | Lamp Group-Signal | 1 |
| 11***26 | Lamp Group-Signal; -Front | 2 |
116-9624 Lamp Gp-Signal
| 11***24 | Lamp Group-Signal | 1 |
| 11***19 | Glass As | 1 |
| 11***70 | Screw-Special | 2 |
116-9627 Lamp Gp-Warning Beacon
| 11***27 | Lamp Group-Warning Beacon | 1 |
| 11***21 | Glass | 1 |
| 11***22 | Motor As | 1 |
118-1881 Lighting Gp-Backup
| 11***81 | Lighting Group-Backup | 1 |
| 12***76 | Lamp As-Flood | 1 |
| 12***53 | Lockwasher | 2 |
119-7781 Lighting Gp-Boom
| 11***62 | Plate | 1 |
| 11***81 | Lighting Group-Boom | 1 |
| 12***75 | Lamp As-Flood | 1 |
111-1959 Lighting Gp-Boom
| 11***59 | Lighting Group-Boom | 1 |
| 11***61 | Plate | 1 |
| 12***75 | Lamp As-Flood | 1 |
118-1882 Lighting Gp-Cab
| 11***82 | Lighting Group-Cab | 1 |
| 12***76 | Lamp As-Flood | 2 |
| 12***53 | Lockwasher | 2 |
111-1850 Lighting Gp-Roading
| 11***50 | Lighting Group-Roading | 1 |
| 11***78 | Lamp Group-Signal | 1 |
| 11***79 | Lamp Group-Head | 1 |
111-1923 Lighting Gp-Roading
| 11***23 | Lighting Group-Roading | 1 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***39 | Plate | 1 |
117-2976 Reflector Gp
| 11***21 | Reflector-Yellow | 4 |
| 11***22 | Reflector-Red | 2 |
| 11***76 | Reflector Group | 1 |
230-3602 Starting Aid Gp
| 03***59 | Plug-Start | 2 |
| 12***56 | Washer | 2 |
| 23***02 | Starting Aid Group | 1 |
127-2957 Starting Aid Gp-Ether
| 06***98 | Nut; (3/8-24-Thd) | 6 |
| 06***99 | Ferrule | 6 |
| 10***33 | Tube | 1 |
110-9458 Starting Motor Gp-Electric
| 10***61 | Starting Motor Group-Electric | 1 |
| 11***58 | Starting Motor Group-Electric | 1 |
| 11***85 | Ring | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
121-0797 Switch Gp-Magnetic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***96 | Switch | 1 |
| 12***97 | Switch Group-Magnetic | 1 |
133-1331 Switch Gp-Pressure -Freon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***76 | Switch-Press As | 1 |
| 13***31 | Switch Group-Pressure; -Freon | 1 |
141-6258 Switch Gp-Resistor
| 12***75 | Connector As | 1 |
| 14***57 | Switch As-Resistor | 1 |
| 14***58 | Switch Group-Resistor | 1 |
124-3424 Switch Gp-Resistor
| 11***91 | Switch As | 1 |
| 12***24 | Switch Group-Resistor | 1 |
| 12***75 | Connector As | 1 |
8u-5842 Switch Gp-Swivel
| 3C***85 | Screw-Countersink Head; (M6x16mm) | 3 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 7 |
| 5W***69 | Plate (Mounting) | 1 |
121-2974 Switch Gp-Swivel
| 12***74 | Switch Group-Swivel | 1 |
| 17***55 | Receptacle As | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
122-5777 Switch Gp-Window
| 12***70 | Switch; (Lower Window) | 1 |
| 12***26 | Plate As-Switch | 1 |
| 12***77 | Switch Group-Window | 1 |
137-7245 Switch Gp-Wiper
| 12***15 | Connector | 1 |
| 13***45 | Switch Group-Wiper | 1 |
| 5W***87 | Terminal-Blade; (12-Ga To 16-Ga) | 2 |
111-1917 Warning Gp-Overload
| 10***56 | Strap-Cable | 1 |
| 11***17 | Warning Group-Overload | 1 |
| 11***01 | Switch Group-Pressure; (Overload Pressure) | 1 |
126-3394 Wiring Gp-Air Conditioner
| 09***61 | Strap; (Cable) | 12 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
172-3700 Wiring Gp-Air Conditioner
| 09***61 | Strap; (Cable) | 4 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 17***00 | Wiring Group-Air Conditioner | 1 |
133-6422 Wiring Gp-Cab Riser
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 09***61 | Strap; (Cable) | 20 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
111-1865 Wiring Gp-Chassis
| 11***65 | Wiring Group-Chassis | 1 |
| 12***73 | Harness As | 1 |
| 9X***72 | Strap-Cable | 5 |
117-7959 Wiring Gp-Console
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 3 |
| 11***17 | Plate | 1 |
| 11***87 | Switch As; (Start, Pilot)(Start/Pilot Pressure Enable) | 1 |
137-9413 Wiring Gp-Control
| 09***61 | Strap; (Cable) | 10 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 12***69 | Diode As; (Brake) | 2 |
123-9715 Wiring Gp-Machine
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 09***61 | Strap; (Cable) | 0 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
123-9719 Wiring Gp-Platform
| 09***61 | Strap; (Cable) | 0 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***75 | Switch Group-Directional; (Turn Signals) | 1 |
141-3995 Wiring Gp-Priority Valve
| 09***61 | Strap; (Cable) | 10 |
| 13***27 | Switch-Key; (Hydraulic Cab Riser (Hcr)) | 1 |
| 14***95 | Wiring Group-Priority Valve | 1 |
121-9144 Wiring Gp-Secondary Steering
| 09***61 | Strap; (Cable) | 15 |
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
121-2452 Wiring Gp-Undercarriage/Swivel
| 12***52 | Wiring Group-Undercarriage/Swivel | 1 |
| 12***72 | Harness As | 1 |
| 12***74 | Switch Group-Swivel | 1 |
Engine Arrangement
107-9665 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 10***13 | Housing Group-Flywheel | 1 |
| 10***18 | Lines Group-Engine Oil | 1 |
117-7939 Installation Ar-Engine
| 11***39 | Installation Ar-Engine | 1 |
| 11***51 | Air Cleaner Group | 1 |
| 11***52 | Muffler Group | 1 |
Frame And Body
117-7964 Counterweight Gp
| 11***37 | Washer; (31x68x10-mm Thk) | 4 |
| 11***64 | Counterweight Group | 1 |
| 11***06 | Counterweight | 1 |
117-7972 Door Gp-Access
| 11***26 | Handle-Latch | 1 |
| 11***72 | Door Group-Access | 1 |
| 12***56 | Liner | 1 |
113-0396 Door Gp-Access
| 11***98 | Hinge | 1 |
| 11***99 | Ball Joint | 1 |
| 11***96 | Door Group-Access | 1 |
117-7970 Door Gp-Access
| 11***26 | Handle-Latch | 1 |
| 11***80 | Mount-Resilient | 2 |
| 11***29 | Bar-Lock | 1 |
117-7977 Door Gp-Storage
| 11***26 | Handle-Latch | 1 |
| 11***77 | Door Group-Storage | 1 |
| 12***57 | Liner | 1 |
130-2444 Door Gp-Tool Box
| 11***26 | Handle-Latch | 1 |
| 13***41 | Door As | 1 |
| 13***44 | Door Group-Tool Box | 1 |
117-7968 Enclosure Gp-Engine
| 10***93 | Plate | 1 |
| 11***14 | Plate As | 1 |
| 11***14 | Plate As | 1 |
132-3340 Enclosure Gp-Radiator
| 08***73 | Screw-Countersink Head | 2 |
| 09***23 | Screw; (M3x0.5x10-mm) | 3 |
| 11***99 | Ball Joint | 1 |
117-7975 Enclosure Gp-Storage
| 10***84 | Bolt-Socket Head; (M12x1.75x120-mm) | 2 |
| 11***64 | Angle | 1 |
| 11***26 | Spring-Gas | 1 |
123-8565 Firewall Gp
| 11***00 | Plate As | 1 |
| 11***23 | Plate | 1 |
| 11***37 | Shield-Spray | 1 |
117-7962 Frame Gp-Upper
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 2 |
123-9721 Gear & Bearing Gp-Swing
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 3 |
| 11***55 | Plate-Swing Bearing | 1 |
| 11***37 | Clamp | 3 |
117-7956 Guard Gp-Bottom
| 11***24 | Cover-Rear; (Lh)(Rear, Lh) | 1 |
| 11***86 | Cover-Rear; (Rh)(Rh Rear) | 1 |
| 11***17 | Cover (Rh Front) | 1 |
117-7966 Hood & Guard Ar
| 11***96 | Door Group-Access | 1 |
| 11***97 | Step Group | 1 |
| 11***66 | Hood & Guard Ar | 1 |
111-1894 Step Gp
| 11***94 | Step Group | 1 |
| 11***13 | Step As | 1 |
| 11***03 | Plate | 4 |
135-2445 Step Gp
| 13***60 | Step As | 1 |
| 13***45 | Step Group | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
113-0397 Step Gp
| 11***14 | Tube As | 1 |
| 11***91 | Plate | 1 |
| 11***92 | Tube As | 1 |
135-0670 Step Gp
| 13***30 | Step As | 1 |
| 13***44 | Door Group-Tool Box | 1 |
| 13***69 | Seal | 1 |
117-7979 Walkway Gp
| 11***45 | Plate As | 1 |
| 11***83 | Plate As | 1 |
| 11***26 | Spring-Gas | 1 |
Fuel System
112-7593 Actuator Gp-Governor
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***93 | Actuator Group-Governor | 1 |
| 14***28 | Kit-Cylinder Seal | 1 |
152-0197 Actuator Gp-Governor
| 11***93 | Actuator Group-Governor | 1 |
| 15***97 | Actuator Group-Governor | 1 |
| 17***53 | Receptacle As; (3 Pin) | 1 |
123-9717 Control Gp-Governor
| 09***44 | Pin-Cotter | 2 |
| 11***40 | Hose As | 1 |
| 12***87 | Seal | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
8u-0876 Hose Gp-Refueling
| 5W***50 | Clamp-Hose | 2 |
| 5W***54 | Coupling-Hose | 1 |
| 5W***55 | Hose As.-Suction | 1 |
117-7987 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 10***25 | Separator Group-Water | 1 |
| 11***87 | Lines Group-Fuel | 1 |
127-8159 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
127-3306 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
5w-8633 Pump Gp-Fuel Transfer -Refueling
| 09***16 | Ring-Retaining | 1 |
| 1D***33 | Bolt 5.72 cm(2.25 In.) Long | 1 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 1 |
127-2229 Pump Gp-Fuel Injection
| 10***77 | Stud | 3 |
| 11***22 | Nut | 1 |
| 11***23 | Washer | 1 |
118-7468 Pump Gp-Fuel Transfer
| 11***68 | Pump Group-Fuel Transfer | 1 |
| 12***29 | Hose; (240-cm Each) | 0 |
| 12***32 | Tube | 1 |
101-3925 Separator Gp-Water
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
117-7988 Tank Gp-Fuel
| 11***78 | Sender-Fuel Level | 1 |
| 11***88 | Tank Group-Fuel | 1 |
| 12***87 | Seal | 1 |
Hydraulic System
8u-2924 Accumulator Gp-Hydraulic -Charged
| 8U***24 | Accumulator Group-Hydraulic; -Charged | 1 |
255-8549 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 25***49 | Accumulator Group-Hydraulic; -Uncharged | 1 |
133-4736 Actuator Gp-Pump
| 12***61 | Bushing | 2 |
| 12***64 | Ring | 2 |
| 12***65 | Kit-Seal | 1 |
159-8010 Actuator Gp-Pump
| 15***10 | Actuator Group-Pump | 1 |
| 15***44 | Cover | 1 |
| 15***45 | Cover | 1 |
126-5317 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***17 | Barrel Group-Pump | 1 |
140-1800 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***32 | Piston | 9 |
136-7780 Barrel Gp-Pump
| 08***98 | Bearing | 1 |
| 11***57 | Pin | 1 |
| 12***32 | Piston | 9 |
159-1463 Barrel Gp-Pump
| 09***58 | Ring-Retaining | 1 |
| 12***48 | Seal-Shaft | 1 |
| 13***00 | Piston | 9 |
130-7736 Barrel Gp-Pump
| 09***58 | Ring-Retaining | 1 |
| 12***48 | Seal-Shaft | 1 |
| 13***36 | Barrel Group-Pump | 1 |
118-7977 Block Gp-Hydraulic
| 11***77 | Block Group-Hydraulic | 1 |
| 4F***91 | Seal (1.302" Diameter); Seal--To Seal Pumps To Case | 2 |
| 5F***78 | Seal --Drain Tube To Flywheel Housing; -- Drain Tube To Flywheel Housing | 1 |
123-0174 Body Gp-Valve
| 12***74 | Body Group-Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
123-0171 Body Gp-Valve
| 12***71 | Body Group-Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 4 |
123-0170 Body Gp-Valve
| 12***70 | Body Group-Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
121-6825 Cartridge As
| 12***25 | Cartridge As | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 2 |
138-3364 Control Ar-Auxiliary
| 11***15 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***12 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***08 | Lines Group-Implement Control | 1 |
138-3365 Control Ar-Auxiliary
| 11***21 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***27 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***08 | Lines Group-Implement Control | 1 |
114-8699 Control Gp-Blade & Stabilizer
| 11***99 | Control Group-Blade & Stabilizer | 1 |
| 11***81 | Plate | 1 |
| 11***84 | Handle | 1 |
111-1901 Control Gp-Brake
| 11***01 | Control Group-Brake | 1 |
| 11***17 | Pedal Group | 1 |
| 12***08 | Cylinder Group-Master | 1 |
111-1904 Control Gp-Impl Stblzr & Brake
| 11***04 | Control Group-Impl Stblzr & Brake | 1 |
| 11***29 | Control Group-Joystick | 2 |
| 11***99 | Control Group-Blade & Stabilizer | 1 |
140-1801 Control Gp-Pump
| 12***61 | Bushing | 2 |
| 12***64 | Ring | 2 |
| 12***65 | Kit-Seal | 1 |
123-9736 Coupling Gp-Flexible
| 12***36 | Coupling Group-Flexible | 1 |
| 13***80 | Coupling Group-Flexible | 1 |
| 13***81 | Coupling Group-Flexible | 1 |
133-1580 Coupling Gp-Flexible
| 13***80 | Coupling Group-Flexible | 1 |
| 13***87 | Coupling Group-Flexible | 1 |
| 13***88 | Gear | 1 |
133-1581 Coupling Gp-Flexible
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 13***81 | Coupling Group-Flexible | 1 |
| 13***71 | Hub-Coupling | 1 |
133-1587 Coupling Gp-Flexible
| 13***87 | Coupling Group-Flexible | 1 |
123-9735 Coupling Gp-Pump
| 12***35 | Coupling Group-Pump | 1 |
| 12***36 | Coupling Group-Flexible | 1 |
| 7X***74 | Bolt | 1 |
120-0306 Cylinder & Mtg Gp-Axle Lock
| 12***06 | Cylinder & Mtg Group-Axle Lock | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 8 |
| 8U***61 | Cylinder Group | 2 |
120-6577 Cylinder & Seal Gp-Boom
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 2 |
| 09***34 | Shim; (T=69.85mm) | 2 |
| 11***80 | Cylinder Group-Boom | 1 |
120-6578 Cylinder & Seal Gp-Boom
| 09***34 | Shim; (T=69.85mm) | 4 |
| 12***11 | Cylinder Group-Variable Adj Boom | 1 |
| 12***78 | Cylinder & Seal Group-Boom | 1 |
120-6575 Cylinder & Seal Gp-Boom
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 2 |
| 09***34 | Shim; (T=69.85mm) | 2 |
| 11***79 | Cylinder Group-Boom | 1 |
120-6579 Cylinder & Seal Gp-Bucket
| 11***50 | Seal-Lip Type | 4 |
| 12***58 | Cylinder Group-Bucket | 1 |
| 12***79 | Cylinder & Seal Group-Bucket | 1 |
120-6576 Cylinder & Seal Gp-Stick
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 11***78 | Cylinder Group-Stick | 1 |
| 12***76 | Cylinder & Seal Group-Stick | 1 |
8u-4461 Cylinder Gp-Axle Osc Lock
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 4 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
142-1625 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***17 | Cone | 1 |
120-0409 Cylinder Gp-Blade
| 11***31 | Pin | 1 |
| 11***32 | Fitting-Grease | 2 |
| 11***15 | Piston | 1 |
118-4980 Cylinder Gp-Boom
| 09***19 | Ring, Back-Up | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***00 | Ring-Retaining | 1 |
118-4979 Cylinder Gp-Boom
| 09***19 | Ring, Back-Up | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***00 | Ring-Retaining | 1 |
120-6358 Cylinder Gp-Bucket
| 09***55 | Ring, Back-Up | 1 |
| 09***00 | Ring; (Retaining) | 1 |
| 09***73 | Seal Assem. | 1 |
120-4708 Cylinder Gp-Master
| 12***08 | Cylinder Group-Master | 1 |
| 12***27 | Collar | 1 |
| 12***28 | Kit-Seal | 1 |
120-0434 Cylinder Gp-Stabilizer
| 11***20 | Seal-O-Ring | 1 |
| 11***08 | Rod | 1 |
| 11***12 | Piston | 1 |
118-4978 Cylinder Gp-Stick
| 09***19 | Ring, Back-Up | 1 |
| 09***06 | Bolt-Socket Head; (M16x2x80-mm) | 8 |
| 09***00 | Ring-Retaining | 1 |
120-6311 Cylinder Gp-Variable Adj Boom
| 09***77 | Packing, Rod | 1 |
| 09***83 | Ring, Buffer | 1 |
| 09***19 | Ring, Back-Up | 1 |
5w-2482 Cylinder Gp-Bucket Tilt
| 5W***72 | Seal-O-Ring; (88.0mm Id) | 1 |
| 5W***23 | Repair Kit-Gasket (Bucket Tilt Cyl) | 1 |
| 5W***82 | Cylinder Group.; (Bucket) | 1 |
249-1278 Distributor Gp-Swivel
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
| 11***75 | Ring-Split | 1 |
120-4712 Drive Gp-Swing
| 09***19 | Ring-Retaining | 3 |
| 09***21 | Ring-Retaining | 4 |
| 11***33 | Nut | 2 |
117-7985 Drive Gp-Swing
| 11***85 | Drive Group-Swing | 1 |
| 12***14 | Drive Group-Swing | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 12 |
120-4714 Drive Gp-Swing
| 12***12 | Drive Group-Swing | 1 |
| 12***13 | Motor Group-Swing | 1 |
| 12***14 | Drive Group-Swing | 1 |
8u-0198 Filter Gp-Oil -Hydraulic
| 8U***98 | Filter Group; -Hydraulic | 1 |
| 8U***22 | Holder-Filter | 1 |
| 8U***23 | Filter Element-Oil; (Hydraulic Oil Return) | 1 |
109-7288 Filter Gp-Oil -Hydraulic, Swing Circuit
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 10***89 | Filter Element As-Oil; (Standard Efficiency)(Swing Circuit) | 1 |
| 11***51 | Housing | 1 |
133-3155 Filter Gp-Oil
| 13***55 | Filter Group-Oil | 1 |
| 13***71 | Plug | 1 |
| 13***72 | Plug | 1 |
123-0177 Filter Gp-Oil
| 12***77 | Filter Group-Oil | 1 |
| 12***73 | Seal-O-Ring | 1 |
109-7286 Filter Gp-Oil
| 10***86 | Filter Group-Oil | 1 |
| 10***87 | Filter Element-Oil; (Standard Efficiency)(Hydraulic Oil Filter) | 1 |
| 11***01 | Base As-Filter | 1 |
125-5388 Fitting Gp-Hydraulic
| 12***88 | Fitting Group-Hydraulic | 1 |
| 12***40 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
8u-0966 Fitting Gp-Hydraulic -Quick Disconnect
| 5W***17 | Seal-O-Ring (Outside) | 1 |
| 8U***66 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 8U***43 | Seal-O-Ring (Inside) | 1 |
125-5387 Fitting Gp-Hydraulic -Quick Disconnect
| 12***87 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 12***41 | Fitting As-Hydraulic; (Quick Disconnect, Male) | 2 |
| 8U***11 | Cap - Protection | 2 |
125-3024 Gauge Gp-Sight
| 12***66 | Stop | 2 |
| 12***67 | Seal-O-Ring | 2 |
| 12***69 | Glass | 1 |
126-5320 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
136-7781 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
| 11***28 | Screw | 2 |
125-4181 Housing Gp-Swing
| 12***81 | Housing Group-Swing | 1 |
| 12***20 | Shaft | 1 |
| 12***22 | Washer | 1 |
118-7711 Lines Gp-Auxiliary Hydraulic
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 16 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 11***57 | Clamp | 4 |
131-1327 Lines Gp-Auxiliary Hydraulic
| 09***61 | Strap; (Cable) | 14 |
| 12***49 | Hose As | 2 |
| 13***27 | Lines Group-Auxiliary Hydraulic | 1 |
118-7684 Lines Gp-Auxiliary Hydraulic
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 8 |
| 11***07 | Clamp; (Lh) | 16 |
126-8812 Lines Gp-Auxiliary Hydraulic
| 09***61 | Strap; (Cable) | 10 |
| 12***12 | Lines Group-Auxiliary Hydraulic | 1 |
| 13***35 | Plate | 1 |
118-7721 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 10 |
| 11***92 | Hose As | 2 |
| 11***17 | Tube As | 2 |
118-7715 Lines Gp-Auxiliary Hydraulic
| 11***24 | Clamp-Single | 8 |
| 11***15 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***41 | Clamp | 4 |
118-7717 Lines Gp-Auxiliary Hydraulic
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 16 |
| 11***57 | Clamp | 12 |
| 11***86 | Clamp-Single | 4 |
118-7682 Lines Gp-Auxiliary Hydraulic
120-0438 Lines Gp-Blade Cylinder
| 11***74 | Valve Group-Solenoid | 1 |
| 11***92 | Hose As | 1 |
| 11***93 | Hose As | 2 |
120-0408 Lines Gp-Blade Cylinder
| 11***92 | Hose As | 2 |
| 11***93 | Hose As | 2 |
| 12***08 | Lines Group-Blade Cylinder | 1 |
118-5325 Lines Gp-Boom
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 16 |
| 11***57 | Clamp | 6 |
| 11***98 | Plate | 1 |
118-5343 Lines Gp-Boom
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 40 |
| 11***57 | Clamp | 4 |
| 11***98 | Plate | 1 |
118-5331 Lines Gp-Boom Cylinder
| 11***54 | Plate | 2 |
| 11***89 | Tube As | 1 |
| 11***90 | Tube As | 1 |
122-7012 Lines Gp-Bucket Tilt Cylinder
| 11***49 | Fitting; (Quick Disconnect, Male) | 2 |
| 11***54 | Cap | 2 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
122-6711 Lines Gp-Check Valve
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***56 | Strap-Cable | 10 |
| 11***80 | Valve Group-Load Control | 1 |
123-9432 Lines Gp-Check Valve
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 8 |
| 10***56 | Strap-Cable | 2 |
| 11***49 | Plate | 1 |
122-6712 Lines Gp-Check Valve
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***56 | Strap-Cable | 2 |
| 11***81 | Valve Group-Load Control | 1 |
123-9218 Lines Gp-Diverter Valve
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 8 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
| 11***07 | Valve Group-Diverter | 1 |
117-8021 Lines Gp-Front
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 1 |
| 11***54 | Hose As | 2 |
| 11***55 | Hose As | 2 |
123-9732 Lines Gp-Hydraulic
| 11***38 | Hose As | 1 |
| 11***41 | Hose As | 2 |
| 11***05 | Clamp-Single | 4 |
120-0305 Lines Gp-Hydraulic
| 11***23 | Clamp-Single | 4 |
| 11***02 | Clamp-Single | 2 |
| 12***05 | Lines Group-Hydraulic | 1 |
125-6568 Lines Gp-Hydraulic
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***81 | Hose As | 1 |
| 11***50 | Hose As | 2 |
117-8019 Lines Gp-Hydraulic
| 11***19 | Lines Group-Hydraulic | 1 |
| 12***93 | Hose As | 1 |
| 12***94 | Hose As | 1 |
134-5808 Lines Gp-Implement Control
| 11***59 | Hose As | 2 |
| 13***08 | Lines Group-Implement Control | 1 |
| 13***09 | Valve Group-Solenoid | 1 |
123-9470 Lines Gp-Load Control Valve
| 11***27 | Hose As | 1 |
| 12***70 | Lines Group-Load Control Valve | 1 |
| 12***37 | Hose As | 1 |
123-9469 Lines Gp-Load Control Valve
| 12***20 | Hose As | 1 |
| 12***69 | Lines Group-Load Control Valve | 1 |
| 12***22 | Hose As | 1 |
122-1548 Lines Gp-Load Control Valve
| 11***34 | Hose As | 1 |
| 12***58 | Hose As | 1 |
| 12***48 | Lines Group-Load Control Valve | 1 |
123-9739 Lines Gp-Pilot
| 11***34 | Hose As | 2 |
| 11***53 | Hose As | 1 |
| 11***46 | Hose As | 1 |
132-8017 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***17 | Lines Group-Pilot | 1 |
| 13***54 | Hose As | 3 |
123-9743 Lines Gp-Pilot
| 11***90 | Hose As | 1 |
| 11***53 | Flange | 1 |
| 11***99 | Nut-Hex; (M33x1.5-Thd) | 2 |
132-8014 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***14 | Lines Group-Pilot | 1 |
| 13***65 | Hose As-Orfs | 1 |
133-6293 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***54 | Hose As | 2 |
| 13***93 | Lines Group-Pilot | 1 |
132-3773 Lines Gp-Pilot
| 11***35 | Hose As | 1 |
| 11***36 | Hose As | 1 |
| 11***49 | Hose As | 1 |
132-8019 Lines Gp-Pilot
| 11***40 | Hose As | 1 |
| 11***41 | Hose As | 1 |
| 12***32 | Hose As | 6 |
133-6292 Lines Gp-Pilot
| 13***54 | Hose As | 3 |
| 13***92 | Lines Group-Pilot | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 6 |
123-9745 Lines Gp-Pilot
| 11***78 | Hose As | 1 |
| 11***88 | Hose As | 1 |
| 12***45 | Lines Group-Pilot | 1 |
133-6294 Lines Gp-Pilot
| 12***32 | Hose As | 1 |
| 13***54 | Hose As | 4 |
| 13***94 | Lines Group-Pilot | 1 |
125-3489 Lines Gp-Pressure Test
| 12***28 | Hose As | 5 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 9 |
| 12***42 | Hose As | 2 |
133-8053 Lines Gp-Pressure Test
| 12***28 | Hose As | 2 |
| 13***53 | Lines Group-Pressure Test | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 4 |
132-3772 Lines Gp-Pump
| 10***16 | Flange | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***66 | Hose | 1 |
123-9738 Lines Gp-Return
| 10***17 | Flange | 1 |
| 11***03 | Block-Return | 1 |
| 11***19 | Hose As | 1 |
112-7165 Lines Gp-Stabilizer
| 11***65 | Lines Group-Stabilizer | 1 |
| 11***47 | Valve Group-Solenoid | 1 |
| 11***96 | Hose As | 3 |
123-9741 Lines Gp-Steering
| 11***83 | Hose As | 1 |
| 11***92 | Hose As | 1 |
| 11***93 | Hose As | 1 |
132-8021 Lines Gp-Steering
| 13***21 | Lines Group-Steering | 1 |
| 13***33 | Hose As | 3 |
| 13***34 | Hose As | 1 |
123-9464 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 12***57 | Hose As | 2 |
123-9436 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
123-9446 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***80 | Plate | 2 |
123-9461 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 12***61 | Hose As | 2 |
123-9463 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 12***63 | Lines Group-Stick | 1 |
123-9467 Lines Gp-Stick
| 11***86 | Clamp-Single | 4 |
| 12***57 | Hose As | 2 |
| 12***67 | Lines Group-Stick | 1 |
123-9462 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 12***62 | Lines Group-Stick | 1 |
123-9448 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***80 | Plate | 2 |
123-9438 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
123-9465 Lines Gp-Stick
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 12 |
| 11***29 | Block | 1 |
| 12***61 | Hose As | 2 |
123-9439 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
123-9447 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***80 | Plate | 2 |
123-9445 Lines Gp-Stick
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***80 | Plate | 2 |
123-9437 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
123-9444 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 6 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
123-9435 Lines Gp-Stick
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 11***07 | Clamp; (Lh) | 2 |
| 11***50 | Hose As | 2 |
123-9466 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 11***53 | Cap | 2 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 2 |
123-9442 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 6 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
123-9441 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 6 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
123-9440 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 6 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
123-9443 Lines Gp-Stick
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 6 |
| 11***53 | Cap | 4 |
| 11***55 | Fitting As-Hydraulic; (Quick Disconnect, Female) | 4 |
132-4275 Lines Gp-Swing Drive
| 10***88 | Filter Group-Oil; -Hydraulic, Swing Circuit-Swing Charge Circuit | 1 |
| 11***54 | Hose As | 1 |
| 11***78 | Hose As | 1 |
123-9729 Motor & Mtg Gp-Travel
| 12***29 | Motor & Mtg Group-Travel | 1 |
| 12***30 | Motor Group-Piston | 1 |
| 7X***91 | Washer-Hard; (17x29x3-mm Thk) | 2 |
123-9730 Motor Gp-Piston
| 09***40 | Ring; (Retaining) | 1 |
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 2 |
| 11***42 | Seal-Shaft | 1 |
120-4713 Motor Gp-Swing
| 09***55 | Bolt; (Socket Head) | 4 |
| 09***39 | Ring; (Retaining) | 1 |
| 10***48 | Valve Group-Shuttle; (Piston Motor) | 1 |
118-9168 Pump & Motor Gp-Steering -Secondary
| 11***68 | Pump & Motor Group-Steering; -Secondary | 1 |
| 13***93 | Motor As-Electric | 1 |
| 13***94 | Seal | 1 |
117-8023 Pump & Mtg Gp-Main Hydraulic
| 11***23 | Pump & Mtg Group-Main Hydraulic | 1 |
| 11***25 | Pump Group-Main & Swing | 1 |
| 6V***20 | Bolt; (M10x1.5x30-mm) | 12 |
117-8030 Pump & Mtg Gp-Steering & Brake
| 11***30 | Pump & Mtg Group-Steering & Brake | 1 |
| 14***57 | Pump Group-Gear | 1 |
| 14***47 | Drive Group-Accessory | 1 |
126-5682 Pump Gp-Gear -Charge
| 11***22 | Seal-Ring | 1 |
| 12***76 | Bushing | 1 |
| 12***82 | Pump Group-Gear; -Charge | 1 |
8u-8062 Pump Gp-Gear -Secondary Steering
| 5W***90 | Plug | 2 |
| 5W***18 | Lockwasher | 2 |
| 5W***40 | Repair-Kit Seal | 1 |
117-8031 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 11***39 | Plate | 1 |
| 11***40 | Housing-Gear | 1 |
126-5321 Pump Gp-Gear -Charge
| 11***22 | Seal-Ring | 1 |
| 12***21 | Pump Group-Gear; -Charge | 1 |
| 12***82 | Pump Group-Gear; -Charge | 1 |
143-4757 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 11***39 | Plate | 1 |
| 11***42 | Coupling | 1 |
197-1529 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 11***39 | Plate | 1 |
| 11***40 | Housing-Gear | 1 |
117-8025 Pump Gp-Main & Swing
| 11***25 | Pump Group-Main & Swing | 1 |
| 13***73 | Pump Group-Main Hydraulic | 1 |
| 13***94 | Pump Group-Swing | 1 |
130-7673 Pump Gp-Main Hydraulic
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***16 | Pin | 4 |
| 11***18 | Bolt-Socket Head; (M18x2.5-Thd) | 4 |
129-8082 Pump Gp-Metering
| 12***82 | Pump Group-Metering | 1 |
| 13***74 | Valve As | 1 |
| 13***78 | Ring | 1 |
139-9532 Pump Gp-Swing
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 10***99 | Plug | 1 |
| 11***26 | Pin | 1 |
133-5494 Pump Gp-Swing
| 09***45 | Plug-Hex; (9/16-18 Thd) | 2 |
| 10***99 | Plug | 1 |
| 11***26 | Pin | 1 |
123-9454 Stabilizer Ar
| 12***07 | Blade Ar | 1 |
| 12***38 | Lines Group-Blade Cylinder | 1 |
| 12***51 | Stabilizer Ar | 1 |
123-9453 Stabilizer Ar
| 11***65 | Lines Group-Stabilizer | 1 |
| 12***34 | Cylinder Group-Stabilizer | 2 |
| 12***51 | Stabilizer Ar | 1 |
123-9451 Stabilizer Ar
| 11***65 | Lines Group-Stabilizer | 1 |
| 12***34 | Cylinder Group-Stabilizer | 2 |
| 12***52 | Wiring Group-Undercarriage/Swivel | 1 |
127-1481 Steering Ar-Secondary
| 12***44 | Wiring Group-Secondary Steering | 1 |
| 12***81 | Steering Ar-Secondary | 1 |
| 12***82 | Steering Group-Hydraulic | 1 |
121-1984 Steering Column Gp
| 12***84 | Steering Column Group | 1 |
| 12***91 | Steering Column Group | 1 |
| 12***82 | Pump Group-Metering | 1 |
5w-5238 Steering Column Gp
| 13***89 | Contact | 1 |
| 13***90 | Cap | 1 |
| 13***91 | Seal-O-Ring; (12.5mm Id) | 1 |
121-1991 Steering Column Gp
| 09***55 | Pin-Spring; (20 mm Long) | 1 |
| 12***91 | Steering Column Group | 1 |
| 12***75 | Screw | 1 |
111-1898 Steering Column Gp
| 09***92 | Clamp, Hose | 3 |
| 11***98 | Steering Column Group | 1 |
| 12***63 | Cover | 1 |
127-1482 Steering Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***68 | Pump & Motor Group-Steering; -Secondary | 1 |
| 12***52 | Fitting | 1 |
130-7742 Support Gp-Valve
| 13***42 | Support Group-Valve | 1 |
| 13***28 | Flange | 1 |
| 13***29 | Hub-Clutch | 1 |
126-6758 Swivel & Mounting Gp
| 12***08 | Plate | 1 |
| 12***58 | Swivel & Mounting Group | 1 |
| 13***68 | Swivel Group | 1 |
111-2015 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 11***38 | Swivel Group | 1 |
| 2Y***81 | Lockwasher | 2 |
249-1277 Swivel Gp
| 11***93 | Lockwasher | 2 |
| 24***77 | Swivel Group | 1 |
| 24***78 | Distributor Group-Swivel | 1 |
139-3369 Swivel Gp
| 12***46 | Lockwasher | 2 |
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 2 |
| 13***69 | Swivel Group | 1 |
8u-5851 Swivel Gp
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 5 |
| 2Y***81 | Lockwasher | 6 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 7 |
117-1738 Swivel Gp
| 11***38 | Swivel Group | 1 |
| 11***55 | Rotor | 1 |
| 11***74 | Ring-Split | 1 |
139-3368 Swivel Gp
| 11***15 | Swivel Group | 1 |
| 13***68 | Swivel Group | 1 |
| 13***69 | Swivel Group | 1 |
117-8010 Tank & Mtg Gp-Hydraulic
| 11***53 | Hose As | 1 |
| 11***10 | Tank & Mtg Group-Hydraulic | 1 |
| 11***12 | Tank Group-Hydraulic | 1 |
117-8012 Tank Gp-Hydraulic
| 03***92 | Seal; (126.59mm Id) | 1 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
123-9486 Valve & Lines Ar
| 11***15 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***86 | Valve & Lines Ar | 1 |
| 12***89 | Valve & Lines Group-Auxiliary | 1 |
123-9474 Valve & Lines Ar
| 11***82 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***07 | Valve & Lines Group-Auxiliary | 1 |
| 12***74 | Valve & Lines Ar | 1 |
123-9488 Valve & Lines Ar-Auxiliary
| 11***21 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***88 | Valve & Lines Ar-Auxiliary | 1 |
| 12***89 | Valve & Lines Group-Auxiliary | 1 |
123-9484 Valve & Lines Gp-Auxiliary
| 11***82 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***11 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***10 | Valve & Lines Group-Auxiliary | 1 |
123-9489 Valve & Lines Gp-Auxiliary
| 11***59 | Hose As | 2 |
| 11***61 | Relay As; (Air Conditioner Compressor) | 1 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 4 |
119-4566 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 2 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 2 |
| 11***38 | Hose As | 1 |
122-8207 Valve & Lines Gp-Auxiliary
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 11***45 | Valve Group-Control | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
122-8209 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 2 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 2 |
| 11***38 | Hose As | 1 |
123-9482 Valve & Lines Gp-Auxiliary
| 11***84 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***17 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***94 | Valve & Lines Group-Auxiliary | 1 |
123-9478 Valve & Lines Gp-Auxiliary
| 11***47 | Valve & Lines Group-Auxiliary | 1 |
| 11***11 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***78 | Valve & Lines Group-Auxiliary | 1 |
123-0194 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 3 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 2 |
| 11***38 | Hose As | 1 |
123-9479 Valve & Lines Gp-Auxiliary
| 11***84 | Lines Group-Auxiliary Hydraulic | 1 |
| 12***09 | Valve & Lines Group-Auxiliary | 1 |
| 12***79 | Valve & Lines Group-Auxiliary | 1 |
111-2047 Valve & Lines Gp-Auxiliary
| 11***47 | Valve & Lines Group-Auxiliary | 1 |
| 11***45 | Valve Group-Control | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
123-9481 Valve & Lines Gp-Auxiliary
| 11***17 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***66 | Valve & Lines Group-Auxiliary | 1 |
| 12***81 | Valve & Lines Group-Auxiliary | 1 |
122-8210 Valve & Lines Gp-Auxiliary
| 11***45 | Valve Group-Control | 2 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***38 | Hose As | 1 |
112-7601 Valve & Lines Gp-Auxiliary
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 11***45 | Valve Group-Control | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
134-3762 Valve & Lines Gp-Priority
| 11***49 | Valve Group-Solenoid | 1 |
| 12***24 | Tube As | 1 |
| 12***25 | Tube As | 1 |
117-0665 Valve & Lines Gp-Priority
| 11***49 | Valve Group-Solenoid | 1 |
| 11***65 | Valve & Lines Group-Priority | 1 |
| 13***76 | Valve Group-Priority | 1 |
123-8817 Valve & Mtg Gp-Main Control
| 11***02 | Support As-Valve | 1 |
| 11***92 | Support As-Valve | 1 |
| 12***31 | Plate | 2 |
126-3843 Valve As-Brake
| 11***99 | Plug | 1 |
| 11***24 | Setscrew | 1 |
| 12***74 | Piston | 1 |
8u-5873 Control Gp-Brake & Axle Lock
| 03***44 | Seal-O-Ring | 1 |
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 2 |
8u-5649 Valve Gp-Bypass & Relief
| 09***56 | Setscrew-Socket | 1 |
| 5K***21 | Seal-O-Ring | 1 |
| 5L***59 | Seal ("O" Ring) | 1 |
8u-5707 Valve Gp-Brake Control
| 11***45 | Lever | 1 |
| 8U***07 | Valve Group-Brake | 1 |
| 8U***01 | Boot | 1 |
121-9948 Valve Gp-Brake Control
| 12***48 | Valve Group-Brake Control | 1 |
| 5P***66 | Seal-O-Ring (Id=32.92mm) | 2 |
| 9X***76 | Seal-O-Ring | 2 |
132-3771 Valve Gp-Bypass & Relief
| 10***67 | Valve | 1 |
| 11***70 | Ring-Retaining | 1 |
| 11***44 | Hose As | 1 |
119-9045 Valve Gp-Check
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
| 11***75 | Housing | 1 |
119-9046 Valve Gp-Check
| 11***46 | Valve Group-Check | 1 |
| 11***79 | Piston | 1 |
| 12***64 | Ring-Split | 4 |
112-5445 Valve Gp-Control
| 11***45 | Valve Group-Control | 1 |
| 11***03 | Cone | 2 |
| 11***04 | Spring | 2 |
255-9101 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***07 | Kit-Seal; (Solenoid Valve) | 1 |
| 12***32 | Lock-Pin | 1 |
115-2408 Valve Gp-Diverter
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***08 | Valve Group-Diverter | 1 |
129-6666 Valve Gp-Diverter
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***96 | Lever | 1 |
| 12***66 | Valve Group-Diverter; -Boom Cyl, Head End | 1 |
115-2407 Valve Gp-Diverter
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***07 | Valve Group-Diverter | 1 |
128-6727 Valve Gp-Diverter
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***23 | Ring-Retaining; (External) | 1 |
| 12***91 | Ball | 1 |
120-5946 Valve Gp-Diverter
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 1 |
| 12***46 | Valve Group-Diverter | 1 |
| 12***18 | Housing | 1 |
111-1899 Valve Gp-Flow Control
| 11***99 | Valve Group-Flow Control | 1 |
| 12***93 | Washer | 7 |
| 12***94 | Washer | 1 |
123-0154 Valve Gp-Flow Control
| 12***54 | Valve Group-Flow Control | 1 |
| 12***96 | Piston | 1 |
| 12***97 | Ring | 1 |
113-7181 Valve Gp-Load Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***81 | Valve Group-Load Control | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
137-8731 Valve Gp-Load Control
| 11***86 | Valve-Check | 1 |
| 11***87 | Body | 1 |
| 12***29 | Disc; (0.1-mm Thk) | 1 |
113-7180 Valve Gp-Load Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 11***80 | Valve Group-Load Control | 1 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
152-7467 Valve Gp-Load Control
| 09***23 | Ring-Retaining; (External) | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 11***45 | Valve Group-Check; -Load Control | 1 |
140-2229 Valve Gp-Main Control
| 11***03 | Cone | 9 |
| 11***04 | Spring | 9 |
| 11***05 | Plug | 10 |
123-8818 Valve Gp-Main Control
| 11***02 | Housing | 1 |
| 11***03 | Cone | 9 |
| 11***04 | Spring | 9 |
137-8733 Valve Gp-Pilot
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 13***33 | Valve Group-Pilot | 1 |
| 5W***20 | Locknut; (M8-Thd) | 1 |
143-0719 Valve Gp-Pilot Manifold
| 10***93 | Filter Element-Oil; (Standard Efficiency) | 1 |
| 12***12 | Seal-O-Ring | 1 |
| 12***53 | Valve Group-Relief | 1 |
112-5702 Valve Gp-Pilot Manifold
| 10***93 | Filter Element-Oil; (Standard Efficiency) | 1 |
| 11***02 | Valve Group-Pilot Manifold | 1 |
| 12***12 | Seal-O-Ring | 1 |
145-4214 Valve Gp-Pilot Manifold
| 10***93 | Filter Element-Oil; (Standard Efficiency) | 1 |
| 12***12 | Seal-O-Ring | 1 |
| 12***53 | Valve Group-Relief | 1 |
134-2776 Valve Gp-Priority
| 11***07 | Plug Group-Control Valve | 2 |
| 11***40 | Kit-Seal; (Priority Valve) | 1 |
| 11***80 | Ring-Backup; (11-mm Id) | 1 |
153-2664 Valve Gp-Priority
| 15***64 | Valve Group-Priority | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
126-5325 Valve Gp-Pump Control -Swing
| 08***72 | Plug-O-Ring | 3 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***10 | Valve As | 1 |
133-4738 Valve Gp-Pump Control -Swing
| 12***25 | Valve Group-Pump Control; -Swing | 1 |
| 13***55 | Filter Group-Oil | 1 |
| 13***38 | Valve Group-Pump Control; -Swing | 1 |
130-7739 Valve Gp-Pump Control
| 08***72 | Plug-O-Ring | 2 |
| 11***80 | Valve Group-Regulator Control | 1 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 1 |
139-8929 Valve Gp-Pump Control -Swing
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 1 |
| 13***29 | Valve Group-Pump Control; -Swing | 1 |
| 13***20 | Valve As | 1 |
117-5784 Valve Gp-Pump Control
| 10***93 | Retainer | 2 |
| 11***84 | Valve Group-Pump Control; -Flow Compensator | 1 |
| 11***09 | Piston-Control | 1 |
117-5780 Valve Gp-Regulator Control
| 11***80 | Valve Group-Regulator Control | 1 |
| 11***99 | Plug | 1 |
| 11***00 | Piston-Control | 1 |
112-4634 Valve Gp-Relief
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
120-6001 Valve Gp-Relief
| 11***37 | Valve Group-Relief | 1 |
| 11***38 | Block-Valve | 1 |
| 12***01 | Valve Group-Relief | 1 |
8u-7385 Valve Gp-Relief
| 6V***80 | Seal-O-Ring; (20.35mm Id) | 1 |
| 8J***13 | Seal-O-Ring | 1 |
| 8U***85 | Valve Group-Relief | 1 |
123-0153 Valve Gp-Relief
| 12***57 | Ring | 1 |
| 12***53 | Valve Group-Relief | 1 |
| 12***93 | Ring | 1 |
114-3073 Valve Gp-Relief
| 03***21 | Ring-Back-Up | 1 |
| 11***49 | Seal-O-Ring | 1 |
| 11***46 | Kit-Seal | 1 |
113-1937 Valve Gp-Relief
| 11***37 | Valve Group-Relief | 1 |
| 11***74 | Kit-Seal | 1 |
| 12***96 | Piston | 1 |
120-0703 Valve Gp-Relief
| 12***93 | Plate | 1 |
| 12***94 | Bolt | 2 |
| 12***95 | Cone | 2 |
126-5675 Valve Gp-Relief -Steering High Pressure Cutoff
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 12***75 | Valve Group-Relief; -Steering High Pressure Cutoff | 1 |
| 12***81 | Plug | 1 |
142-3952 Valve Gp-Relief
| 12***94 | Bolt | 2 |
| 12***96 | Washer | 2 |
| 12***97 | Spring | 2 |
114-0213 Valve Gp-Relief
| 11***13 | Valve Group-Relief | 1 |
| 11***42 | Kit-Seal | 1 |
| 11***61 | Ring-Backup | 2 |
124-2939 Valve Gp-Relief
| 12***39 | Valve Group-Relief | 1 |
| 12***30 | Ring | 1 |
| 5P***57 | Seal-O-Ring; (18.77mm Id) | 1 |
126-5674 Valve Gp-Relief -Crossover
| 11***19 | Ring-Backup | 1 |
| 12***74 | Valve Group-Relief; -Crossover | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
145-6192 Valve Gp-Relief
| 12***98 | Ball | 1 |
| 12***69 | Spring | 1 |
| 12***70 | Retainer | 1 |
114-0216 Valve Gp-Relief -Line
| 11***16 | Valve Group-Relief; -Line | 1 |
| 11***70 | Kit-Seal; (Relief Valve) | 1 |
| 11***64 | Ring-Backup | 2 |
114-0217 Valve Gp-Relief -Line
| 11***17 | Valve Group-Relief; -Line | 1 |
| 11***70 | Kit-Seal; (Relief Valve) | 1 |
| 11***64 | Ring-Backup | 2 |
123-0155 Valve Gp-Solenoid
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
| 12***25 | Cartridge As | 1 |
| 12***55 | Valve Group-Solenoid | 1 |
156-9853 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 12***11 | Pin-Spring | 1 |
| 15***53 | Valve Group-Solenoid | 1 |
112-7174 Valve Gp-Solenoid
| 11***74 | Valve Group-Solenoid | 1 |
| 12***84 | Block | 1 |
| 12***60 | Valve Group-Solenoid | 1 |
134-5809 Valve Gp-Solenoid
| 13***09 | Valve Group-Solenoid | 1 |
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 2 |
| 14***57 | Plate | 1 |
113-7347 Valve Gp-Solenoid
| 11***47 | Valve Group-Solenoid | 1 |
| 12***60 | Valve Group-Solenoid | 2 |
| 8U***37 | Block | 1 |
120-0704 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 12***04 | Valve Group-Solenoid | 1 |
| 12***11 | Pin-Spring | 2 |
125-1260 Valve Gp-Solenoid
| 09***51 | Seal-O-Ring (Id=14.00mm) | 2 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
| 12***60 | Valve Group-Solenoid | 1 |
139-6813 Valve Gp-Solenoid
| 12***04 | Valve Group-Solenoid | 1 |
| 13***13 | Valve Group-Solenoid | 1 |
| 14***52 | Valve Group-Relief; -Line, Medium Pressure | 1 |
143-2363 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***04 | Bolt | 4 |
| 12***06 | Ring | 4 |
142-5558 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 12***11 | Pin-Spring | 2 |
| 14***58 | Valve Group-Solenoid | 1 |
123-0156 Valve Gp-Solenoid
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***56 | Valve Group-Solenoid | 1 |
| 12***04 | Bolt | 4 |
113-7348 Valve Gp-Solenoid
| 11***48 | Valve Group-Solenoid | 1 |
| 12***02 | Screw | 1 |
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 2 |
112-5701 Valve Gp-Solenoid
| 11***01 | Valve Group-Solenoid | 1 |
| 12***03 | Valve Group-Relief | 1 |
| 12***04 | Valve Group-Solenoid | 1 |
113-7349 Valve Gp-Solenoid
| 11***49 | Valve Group-Solenoid | 1 |
| 12***55 | Valve Group-Solenoid | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
133-2881 Valve Gp-Swing Pump
| 13***81 | Valve Group-Swing Pump | 1 |
| 13***74 | Plate-Filter | 1 |
| 13***76 | Housing | 1 |
Implements
118-5308 Boom Ar-1 Piece
| 11***08 | Boom Ar-1 Piece | 1 |
| 11***25 | Lines Group-Boom | 1 |
| 11***29 | Lines Group-Grease | 1 |
118-5336 Boom Ar-Variable Adjustable
| 11***01 | Valve & Lines Group-Auxiliary | 1 |
| 11***31 | Lines Group-Boom Cylinder | 1 |
| 11***36 | Boom Ar-Variable Adjustable | 1 |
123-8929 Boom Gp-1 Piece
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***97 | Shim (2.0mm Thick) | 1 |
123-8930 Boom Gp-Fore
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***97 | Shim (2.0mm Thick) | 1 |
123-8931 Boom Gp-Stub
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***18 | Shim; (2-mm Thk) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
118-5349 Lines Gp-Grease
| 09***61 | Strap; (Cable) | 31 |
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 6 |
| 11***32 | Valve Group-Lube Distribution | 1 |
118-5329 Lines Gp-Grease
| 09***61 | Strap; (Cable) | 17 |
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 7 |
| 11***33 | Valve Group-Lube Distribution | 1 |
118-5510 Linkage Ar-Bucket
| 11***08 | Linkage Group-Bucket | 1 |
| 11***10 | Linkage Ar-Bucket | 1 |
| 12***79 | Cylinder & Seal Group-Bucket | 1 |
128-6184 Linkage Ar-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***12 | Lines Group-Bucket Tilt Cylinder | 1 |
| 12***14 | Pin Group-Excavator | 1 |
118-5506 Linkage Ar-Bucket
| 11***06 | Linkage Ar-Bucket | 1 |
| 11***08 | Linkage Group-Bucket | 1 |
| 12***79 | Cylinder & Seal Group-Bucket | 1 |
118-5508 Linkage Gp-Bucket
| 09***42 | Seal Bkt To Stk & Link | 2 |
| 09***34 | Shim; (T=69.85mm) | 4 |
| 10***76 | Seal-O-Ring | 2 |
123-4968 Pin Gp-Excavator
| 10***78 | Pin | 2 |
| 12***68 | Pin Group-Excavator | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
122-7014 Pin Gp-Excavator
| 12***59 | Pin As | 1 |
| 12***62 | Pin | 1 |
| 12***14 | Pin Group-Excavator | 1 |
123-4967 Pin Gp-Excavator
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 11***35 | Pin As | 2 |
| 12***67 | Pin Group-Excavator | 1 |
126-1575 Restraint Gp-Travel
| 11***13 | Hook As-Rh | 1 |
| 11***14 | Hook As-Lh | 1 |
| 12***71 | Bracket As | 1 |
111-1919 Restraint Gp-Travel
| 11***19 | Restraint Group-Travel | 1 |
| 11***39 | Bracket As | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 4 |
111-2030 Restraint Gp-Travel
| 11***30 | Restraint Group-Travel | 1 |
| 11***45 | Bracket As | 1 |
| 11***13 | Hook As-Rh | 1 |
123-9452 Stabilizer Gp
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 11***97 | Pin-Lh | 1 |
| 11***98 | Pin-Rh | 1 |
123-9457 Stick Ar
| 12***40 | Stick Group-Hoe | 1 |
| 12***57 | Stick Ar | 1 |
| 12***63 | Lines Group-Stick | 1 |
123-9459 Stick Ar
| 12***42 | Stick Group-Hoe | 1 |
| 12***59 | Stick Ar | 1 |
| 12***65 | Lines Group-Stick | 1 |
123-9455 Stick Ar
| 12***37 | Stick Group-Hoe | 1 |
| 12***55 | Stick Ar | 1 |
| 12***61 | Lines Group-Stick | 1 |
123-9456 Stick Ar
| 12***39 | Stick Group-Hoe | 1 |
| 12***56 | Stick Ar | 1 |
| 12***62 | Lines Group-Stick | 1 |
123-9458 Stick Ar
| 12***41 | Stick Group-Hoe | 1 |
| 12***58 | Stick Ar | 1 |
| 12***64 | Lines Group-Stick | 1 |
123-9460 Stick Ar-Material Handling
| 12***60 | Stick Ar-Material Handling | 1 |
| 12***66 | Lines Group-Stick | 1 |
| 12***67 | Lines Group-Stick | 1 |
123-9468 Stick Gp
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
123-8937 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
123-8941 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
123-8939 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
123-8940 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
123-8942 Stick Gp-Hoe
| 09***65 | Shim (1.0mm Thick) | 1 |
| 09***97 | Shim (2.0mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
117-7632 Valve Gp-Lube Distribution
| 11***32 | Valve Group-Lube Distribution | 1 |
| 11***34 | Fitting-Straight | 1 |
| 13***42 | Fitting | 11 |
117-7633 Valve Gp-Lube Distribution
| 11***33 | Valve Group-Lube Distribution | 1 |
| 11***34 | Fitting-Straight | 1 |
| 13***42 | Fitting | 7 |
Lubrication System
123-2935 Gauge Gp-Oil Level (Dipstick)
| 12***32 | Tube As | 1 |
| 12***33 | Clip | 1 |
| 12***34 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
106-8918 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***61 | Bolt; (M10x1.50x50-mm) | 1 |
| 10***15 | Bolt | 3 |
127-3295 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
Machine Arrangement
140-2968 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***34 | Angle As | 1 |
| 13***81 | Pin As | 2 |
140-2967 Roading Ar -Italian! Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***34 | Angle As | 1 |
| 13***81 | Pin As | 2 |
142-4876 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***01 | Plate | 4 |
140-2701 Roading Ar -Italian
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
| 13***02 | Plate | 1 |
140-2973 Roading Ar -Italian
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
| 13***02 | Plate | 1 |
140-2225 Roading Ar -Italian
| 08***60 | Washer; (5.3x25x1.6-mm Thk) | 2 |
| 09***61 | Strap; (Cable) | 1 |
| 11***27 | Lamp Group-Warning Beacon | 2 |
140-2655 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
140-2969 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***67 | Plate | 1 |
142-4875 Roading Ar -Italian
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 13***81 | Pin As | 2 |
| 13***01 | Plate | 4 |
Operator Station
130-0412 Accumulator Gp-Refrigerant
| 12***47 | Accumulator Group-Refrigerant | 1 |
| 13***12 | Accumulator Group-Refrigerant | 1 |
| 13***31 | Switch Group-Pressure; -Freon | 1 |
121-2447 Accumulator Gp-Refrigerant
| 12***47 | Accumulator Group-Refrigerant | 1 |
| 9L***93 | Cap-Fuel Pressure Pickup | 1 |
122-4743 Air Compressor Gp-Seat
| 12***43 | Air Compressor Group-Seat | 1 |
| 13***68 | Nut | 1 |
| 13***75 | Air Compressor Group-Seat | 1 |
131-2875 Air Compressor Gp-Seat
| 13***75 | Air Compressor Group-Seat | 1 |
| 13***78 | Console | 1 |
| 13***79 | Plate-Plastic | 1 |
137-4187 Air Conditioner Ar
| 09***61 | Strap; (Cable) | 1 |
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
126-3476 Air Conditioner Ar
| 09***61 | Strap; (Cable) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 12***42 | Seal-O-Ring | 1 |
132-6233 Air Conditioner Gp
| 09***55 | Washer, Tooth | 8 |
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 2 |
| 12***42 | Seal-O-Ring | 1 |
118-1873 Blind Gp-Cab
| 11***73 | Blind Group-Cab | 1 |
| 13***14 | Bracket | 2 |
| 13***15 | Fastener | 2 |
118-1874 Blind Gp-Cab
| 11***74 | Blind Group-Cab | 1 |
| 13***17 | Fastener-Upper | 1 |
| 13***18 | Fastener-Lower | 1 |
120-5380 Blind Gp-Cab
| 12***80 | Blind Group-Cab | 1 |
| 12***76 | Rivet | 2 |
| 13***14 | Bracket | 2 |
122-2372 Blower Gp-Cab
| 12***72 | Blower Group-Cab | 1 |
| 12***73 | Resistor | 1 |
122-2375 Blower Gp-Refrig Condenser
| 12***75 | Blower Group-Refrig Condenser | 1 |
| 12***94 | Guard-Fan | 1 |
122-5771 Box As-Storage
| 12***76 | Rivet | 8 |
| 12***86 | Insert | 1 |
| 12***87 | Insert | 1 |
146-6177 Cab Ar
| 09***61 | Strap; (Cable) | 1 |
| 12***32 | Cab Group | 1 |
| 12***36 | Hatch Group-Roof | 1 |
111-1906 Cab Ar
| 09***61 | Strap; (Cable) | 1 |
| 11***06 | Cab Ar | 1 |
| 12***32 | Cab Group | 1 |
118-1871 Cab Ar
| 09***61 | Strap; (Cable) | 1 |
| 11***71 | Cab Ar | 1 |
| 12***32 | Cab Group | 1 |
111-1913 Cab Ar
| 09***61 | Strap; (Cable) | 1 |
| 11***13 | Cab Ar | 1 |
| 12***32 | Cab Group | 1 |
122-4732 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 10***03 | Ring (Rubber) | 4 |
| 11***25 | Seal; (89.5 cm) | 0 |
3e-1906 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***99 | Coil As-24 Volt | 1 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 10***47 | Coil Assem. | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
119-8060 Condenser Gp-Refrigerant
| 11***60 | Condenser Group-Refrigerant | 1 |
| 12***75 | Blower Group-Refrig Condenser | 1 |
| 12***18 | Condenser As | 1 |
145-7723 Condenser Gp-Refrigerant
| 12***75 | Screw | 2 |
| 12***18 | Condenser As | 1 |
| 12***94 | Guard-Fan | 1 |
121-3417 Connector Gp-Cab Heater Lines
| 12***17 | Connector Group-Cab Heater Lines | 1 |
| 7W***69 | Adapter; (Lubricating Oil Cooler) | 2 |
111-2026 Console Gp-Operator
| 11***26 | Console Group-Operator | 1 |
| 12***53 | Panel; (Lh) | 1 |
| 12***54 | Panel; (Rh) | 1 |
111-2025 Console Gp-Operator
| 11***25 | Console Group-Operator | 1 |
| 12***44 | Cover | 1 |
| 12***45 | Body | 1 |
127-8031 Control Gp-Air & Temperature
| 08***66 | Locknut; (M8x1.25-Thd) | 1 |
| 12***82 | Button | 4 |
| 12***83 | Angle | 2 |
126-6031 Control Gp-Air & Temperature
| 12***31 | Control Group-Air & Temperature | 1 |
| 12***31 | Control Group-Air & Temperature | 1 |
| 12***32 | Cable As | 1 |
111-1939 Control Gp-Hydraulic Pedal
| 11***39 | Control Group-Hydraulic Pedal | 1 |
| 11***66 | Bracket | 1 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
112-5699 Control Gp-Hydraulic Pedal -Travel
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***99 | Control Group-Hydraulic Pedal; -Travel | 1 |
| 11***19 | Setscrew | 1 |
112-5704 Control Gp-Hydraulic Pedal
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 1 |
| 11***04 | Control Group-Hydraulic Pedal; -Variable Adjustable Boom | 1 |
| 11***19 | Setscrew | 1 |
111-2029 Control Gp-Joystick
| 11***29 | Control Group-Joystick | 1 |
| 11***31 | Control Group-Joystick | 1 |
| 12***52 | Kit-Cap | 1 |
125-4903 Cover Gp-Cab Riser
| 12***03 | Cover Group-Cab Riser | 1 |
| 13***71 | Plate As | 1 |
| 5W***19 | Washer; (9.8x18.5x1.5-mm Thk)(9.8x18.5x1.5-mm Thk) | 8 |
125-4902 Cover Gp-Cab Riser
| 12***02 | Cover Group-Cab Riser | 1 |
| 13***72 | Plate As | 1 |
| 5W***19 | Washer; (9.8x18.5x1.5-mm Thk)(9.8x18.5x1.5-mm Thk) | 8 |
122-5756 Cover Gp-Wiper Motor
| 12***76 | Rivet | 3 |
| 12***77 | Bracket | 1 |
| 12***78 | Cover-Wiper Motor | 1 |
131-2561 Door Gp-Cab
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
131-0932 Door Gp-Cab
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
131-2562 Door Gp-Cab
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
146-9563 Door Gp-Cab
| 09***86 | Screw-Machine; (M6x1x25-mm) | 2 |
| 12***10 | Screw | 4 |
| 12***11 | Screw | 1 |
156-9017 Filter Ar-Air
| 15***63 | Screen Group-Radiator | 1 |
| 15***07 | Filter Group-Cab Air | 1 |
| 15***17 | Filter Ar-Air | 1 |
156-7407 Filter Gp-Cab Air
| 11***22 | Screw-Pan Head | 8 |
| 14***80 | Plate As-Box | 1 |
| 14***85 | Plate-Bottom | 1 |
130-6598 Frame Gp-Seat
| 12***44 | Hose | 1 |
| 12***38 | Handle | 1 |
| 12***39 | Cam | 1 |
130-6945 Frame Gp-Seat
| 12***29 | Plate | 1 |
| 13***45 | Frame Group-Seat | 1 |
| 5W***31 | Ring-Retaining | 1 |
111-1903 Frame Gp-Seat
| 11***03 | Frame Group-Seat | 1 |
| 12***38 | Handle | 1 |
| 12***39 | Cam | 1 |
124-9628 Frame Gp-Seat
| 12***28 | Frame Group-Seat | 1 |
| 12***29 | Plate | 1 |
| 5W***31 | Ring-Retaining | 1 |
111-1936 Guard Gp-Overhead
| 09***76 | Nut; (M14x2-Thd) | 2 |
| 09***59 | Bolt; (M14x2x60-mm) | 2 |
| 11***35 | Guard Group-Overhead | 1 |
111-1935 Guard Gp-Overhead
| 11***35 | Guard Group-Overhead | 1 |
| 11***31 | Guard As-Cab | 1 |
| 13***63 | Seal-Ring | 4 |
111-1937 Guard Gp-Vandalism
| 11***37 | Guard Group-Vandalism | 1 |
| 11***22 | Seal; (22 cm)(400cm) | 0 |
| 13***00 | Rivet | 3 |
122-4736 Hatch Gp-Roof
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 12***36 | Hatch Group-Roof | 1 |
| 12***54 | Screw | 4 |
111-1942 Headrest As-Seat
| 11***42 | Headrest As-Seat | 1 |
| 5W***69 | Guide | 2 |
123-9716 Heater Gp-Cab
| 09***92 | Clamp, Hose | 4 |
| 11***30 | Grommet-Rubber | 1 |
| 11***31 | Grommet-Rubber | 1 |
132-6234 Heater Gp-Cab
| 09***55 | Washer, Tooth | 8 |
| 12***05 | Bolt; (M4x0.7x12-mm) | 3 |
| 12***72 | Blower Group-Cab | 1 |
111-1930 Horn Gp-Air
| 11***30 | Horn Group-Air | 1 |
| 12***37 | Bracket | 1 |
| 2Y***81 | Lockwasher | 2 |
5w-5860 Horn Gp-Air
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
| 5P***92 | Hose 4.13 M(162.5 In.); 200.0mm(7.88in) Lg | 2 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
111-1851 Horn Gp-Electric
| 11***51 | Horn Group-Electric | 1 |
| 15***59 | Horn As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
126-7829 Installation Gp-Radio
| 10***87 | Bolt; (M5x0.8x12-mm) | 2 |
| 12***29 | Installation Group-Radio | 1 |
| 5W***37 | Mount-Speaker | 2 |
117-7960 Instrument Gp
| 11***05 | Switch Group; (Blower Fan Speed) | 1 |
| 11***07 | Cover | 1 |
| 11***81 | Cover | 1 |
122-5781 Liner Gp-Cab
| 12***34 | Strip; (60 cm) | 0 |
| 12***36 | Strip; (402 cm) | 0 |
| 12***37 | Cushion-Rh | 1 |
133-8054 Lines Gp-Air Conditioner
| 12***42 | Seal-O-Ring | 2 |
| 12***45 | Seal-O-Ring | 2 |
| 13***54 | Lines Group-Air Conditioner | 1 |
133-5387 Lines Gp-Heater
| 12***81 | Pipe | 2 |
| 13***54 | Clamp-Double | 1 |
| 13***87 | Lines Group-Heater | 1 |
5w-1128 Mirror Gp
| 12***54 | Screw | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
| 5W***28 | Mirror Group | 1 |
111-1922 Mirror Gp
| 11***22 | Mirror Group | 1 |
| 12***94 | Plug | 1 |
| 16***44 | Rod As | 1 |
139-1428 Mirror Gp
| 13***28 | Mirror Group | 1 |
| 14***58 | Glass | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
145-3178 Mirror Gp-Rear View
| 09***68 | Grommet | 1 |
| 12***94 | Plug | 1 |
| 13***29 | Clamp-Single | 2 |
5w-4663 Mirror Gp-Rear View
| 12***54 | Screw | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
| 5W***63 | Mirror Group-Rear View | 1 |
120-6954 Mirror Gp-Rear View
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 12***54 | Mirror Group-Rear View | 1 |
| 12***54 | Screw | 1 |
111-1859 Mirror Gp-Rear View
| 11***59 | Mirror Group-Rear View | 1 |
| 12***54 | Mirror Group-Rear View | 1 |
| 12***94 | Plug | 1 |
141-8440 Monitor Gp-Operator
| 12***24 | Switch Group-Resistor | 1 |
| 12***83 | Screw-Pan Head | 5 |
| 13***97 | Monitor As-Panel | 1 |
148-7927 Monitor Gp-Operator
| 12***83 | Screw-Pan Head | 5 |
| 13***97 | Monitor As-Panel | 1 |
| 13***98 | Lamp As | 19 |
143-6855 Monitor Gp-Operator
| 12***83 | Screw-Pan Head | 5 |
| 13***97 | Monitor As-Panel | 1 |
| 13***98 | Lamp As | 19 |
131-5196 Monitor Gp-Operator
| 12***24 | Switch Group-Resistor | 1 |
| 12***83 | Screw-Pan Head | 5 |
| 12***89 | Board As | 1 |
111-1905 Mounting Gp-Cab
| 11***05 | Mounting Group-Cab | 1 |
| 11***21 | Seal; (85-cm Each) | 0 |
| 13***24 | Screw-Flat Head | 1 |
123-9714 Operator Ar
| 11***98 | Steering Column Group | 1 |
| 11***01 | Control Group-Brake | 1 |
| 11***04 | Control Group-Impl Stblzr & Brake | 1 |
111-2017 Pedal Gp
| 09***16 | Ring-Retaining | 1 |
| 09***23 | Ring-Retaining; (External) | 2 |
| 11***17 | Pedal Group | 1 |
126-6810 Platform Gp
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 11***00 | Platform As | 1 |
| 11***53 | Bracket As | 2 |
132-6738 Platform Gp-Operator
| 11***53 | Bracket As | 2 |
| 13***46 | Plate | 1 |
| 13***38 | Platform Group-Operator | 1 |
136-5824 Platform Gp-Operator
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 11***53 | Bracket As | 2 |
| 11***90 | Ring | 1 |
120-5701 Radio Gp
| 12***01 | Radio Group | 1 |
| 12***66 | Reducer | 1 |
| 16***34 | Radio Group | 1 |
122-5773 Rail Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 12***69 | Switch; (Upper Windshield) | 1 |
| 12***08 | Rail As-Lower | 1 |
134-3727 Riser Ar-Cab
| 13***37 | Riser Group-Cab | 1 |
| 13***38 | Platform Group-Operator | 1 |
| 13***14 | Lines Group-Pilot | 1 |
132-6737 Riser Gp-Cab
| 12***76 | Plate | 1 |
| 12***61 | Step As | 1 |
| 12***02 | Cover Group-Cab Riser | 1 |
8y-4031 Seat Belt Gp
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
| 8Y***30 | Seat Belt Group (For Outside Japan); Belt Gp-Seat (No Serviceable Parts) | 1 |
111-1912 Seat Belt Gp
| 11***12 | Seat Belt Group | 1 |
| 12***79 | Screw | 1 |
| 12***80 | Washer | 1 |
135-3504 Seat Belt Gp
| 13***04 | Seat Belt Group | 1 |
| 8Y***31 | Seat Belt Group | 1 |
115-9139 Seat Gp
| 11***02 | Seat Group-Suspension | 1 |
| 11***39 | Seat Group | 1 |
| 11***93 | Hose | 2 |
122-4742 Seat Gp-Suspension
| 08***66 | Locknut; (M8x1.25-Thd) | 4 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***25 | Console Group-Operator | 1 |
117-0664 Seat Gp-Suspension
| 11***64 | Seat Group-Suspension | 1 |
| 12***42 | Seat Group-Suspension | 1 |
| 12***43 | Air Compressor Group-Seat | 1 |
111-1902 Seat Gp-Suspension
| 08***66 | Locknut; (M8x1.25-Thd) | 6 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***02 | Seat Group-Suspension | 1 |
130-6595 Support Gp-Seat
| 08***66 | Locknut; (M8x1.25-Thd) | 2 |
| 13***95 | Support Group-Seat | 1 |
| 13***48 | Spring As-Air | 1 |
111-2028 Support Gp-Seat
| 08***66 | Locknut; (M8x1.25-Thd) | 2 |
| 11***28 | Support Group-Seat | 1 |
| 11***58 | Spacer | 1 |
111-2027 Suspension Gp-Seat
| 11***27 | Suspension Group-Seat | 1 |
| 12***25 | Rail-Guide | 1 |
| 12***26 | Rail-Guide | 1 |
8u-7008 Suspension Gp-Seat
| 08***66 | Locknut; (M8x1.25-Thd) | 4 |
| 12***71 | Arm As | 1 |
| 5W***70 | Spring | 4 |
111-1932 Visor Gp-Cab
| 11***32 | Visor Group-Cab | 1 |
| 12***36 | Support; (Lh) | 1 |
| 12***37 | Support; (Rh) | 1 |
122-5758 Visor Gp-Cab
| 09***71 | Washer-Spring | 2 |
| 09***66 | Bolt; (M8x1.25x75-mm) | 1 |
| 12***79 | Stop | 1 |
8u-2598 Washer Gp-Window
| 12***25 | Tank | 1 |
| 12***26 | Holder | 1 |
| 16***60 | Pump As | 1 |
146-9562 Window Gp-Door
| 12***54 | Screw | 2 |
| 12***55 | Screw | 2 |
| 12***56 | Bar; (41 cm) | 0 |
123-6515 Window Gp-Door
| 12***54 | Screw | 2 |
| 12***55 | Screw | 2 |
| 12***56 | Bar; (41 cm) | 0 |
122-5774 Window Gp-Front -Lower
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***09 | Window-Front; (Lower) | 1 |
| 12***12 | Plate | 2 |
122-5776 Window Gp-Front -Upper
| 12***10 | Adhesive | 1 |
| 12***21 | Window-Front; (Upper) (Glass) | 1 |
| 12***22 | Strap; (20cm) | 0 |
131-1764 Wiper & Washer Gp-Window
| 09***61 | Strap; (Cable) | 5 |
| 11***53 | Screw; (M6x1x16-mm) | 3 |
| 12***62 | Blade As-Wiper; (400-mm) | 1 |
122-5779 Wiper Gp-Window
| 12***67 | Motor Group-Window Wiper | 1 |
| 12***07 | Washer | 1 |
| 12***23 | Washer | 1 |
Power Train
124-2920 Axle & Mtg Ar-Front
| 11***70 | Pin | 1 |
| 11***30 | Plate As | 2 |
| 12***20 | Axle & Mtg Ar-Front | 1 |
131-3110 Axle & Mtg Ar-Rear
| 12***24 | Cap | 2 |
| 13***04 | Axle & Transmission Ar | 1 |
| 13***10 | Axle & Mtg Rear Axle | 1 |
123-9727 Axle & Transmission Ar
| 12***27 | Axle & Transmission Ar | 1 |
| 12***28 | Axle Rear Axle | 1 |
| 12***78 | Transmission Ar | 1 |
131-2904 Axle & Transmission Ar
| 12***78 | Transmission Ar | 1 |
| 13***04 | Axle & Transmission Ar | 1 |
| 13***12 | Axle Rear Axle | 1 |
124-2921 Axle Ar-Front
| 05***12 | Shim; (0.3-mm Thk) | 2 |
| 05***13 | Shim; (0.2-mm Thk) | 2 |
| 05***14 | Shim; (0.1-mm Thk) | 2 |
123-9726 Axle Ar-Rear
| 12***24 | Cap | 2 |
| 12***26 | Axle Rear Axle | 1 |
| 12***27 | Axle & Transmission Ar | 1 |
131-3112 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
123-9728 Axle Ar-Rear
| 05***52 | Shim 1.5mm(.059in)Thk | 2 |
| 05***53 | Shim 2.0mm(.078in)Thk | 2 |
| 05***54 | Shim 2.5mm(.098in)Thk | 2 |
158-6333 Brake Gp-Drum
| 12***50 | Shoe-Brake | 2 |
| 12***51 | Bolt | 2 |
| 12***52 | Plate | 1 |
129-2721 Brake Gp-Drum
| 12***21 | Brake Group-Drum | 1 |
| 12***35 | Support As | 1 |
| 12***37 | Cylinder | 1 |
8u-6725 Ring Gp-Tire
| 8U***24 | Ring-Tire | 4 |
| 8U***25 | Ring Group-Tire | 1 |
8u-6727 Ring Gp-Tire
| 8U***27 | Ring Group-Tire | 1 |
| 8U***28 | Ring-Tire | 4 |
8u-6723 Ring Gp-Tire
| 32***49 | Ring-Tire | 4 |
| 8U***23 | Ring Group-Tire | 1 |
121-3968 Shaft Gp-Drive
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 11***15 | Universal Joint Group | 1 |
| 11***42 | Bolt; (M10x1x35-mm) | 16 |
120-0298 Shaft Gp-Drive
| 11***45 | Nut; (M10x1.0-Thd) | 16 |
| 12***98 | Shaft Group-Drive | 1 |
| 12***38 | Universal Joint Group | 1 |
110-6135 Shaft Gp-Drive -Carrier Bearing
| 11***35 | Shaft Group-Drive; -Carrier Bearing | 1 |
| 5W***13 | Housing-Parking Brake | 1 |
| 5W***16 | Shaft | 1 |
111-2003 Tire & Rim Ar
| 11***03 | Tire & Rim Ar | 1 |
| 11***11 | Tire & Rim Group | 8 |
125-9671 Tire & Rim Ar
| 12***71 | Tire & Rim Ar | 1 |
| 12***72 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-1999 Tire & Rim Ar
| 11***99 | Tire & Rim Ar | 1 |
| 11***07 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
111-2000 Tire & Rim Ar
| 11***00 | Tire & Rim Ar | 1 |
| 11***08 | Tire & Rim Group | 8 |
| 5W***47 | Clamp | 4 |
113-1866 Tire & Rim Ar
| 11***04 | Tire & Rim Group | 8 |
| 11***66 | Tire & Rim Ar | 1 |
| 22***74 | Extension As-Air | 4 |
123-3879 Tire & Rim Ar
| 12***79 | Tire & Rim Ar | 1 |
| 12***10 | Tire & Rim Group | 8 |
| 22***74 | Extension As-Air | 4 |
144-5174 Tire & Rim Ar
| 11***09 | Tire & Rim Group | 4 |
| 12***29 | Plate As | 2 |
| 14***74 | Tire & Rim Ar | 1 |
111-1997 Tire & Rim Ar
| 11***97 | Tire & Rim Ar | 1 |
| 11***05 | Tire & Rim Group | 8 |
| 5W***47 | Clamp | 4 |
111-2011 Tire & Rim Gp
| 11***11 | Tire & Rim Group | 1 |
| 24***71 | Rim As | 1 |
| 5W***52 | Tire-Solid; (10-20) | 1 |
111-2007 Tire & Rim Gp
| 11***07 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
124-2910 Tire & Rim Gp
| 12***10 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2009 Tire & Rim Gp
| 11***09 | Tire & Rim Group | 1 |
| 15***62 | Rim As-Wheel | 1 |
| 5W***36 | Tire-18r-19,5 Xf | 1 |
111-2004 Tire & Rim Gp
| 11***04 | Tire & Rim Group | 1 |
| 22***75 | Rim As | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
111-2008 Tire & Rim Gp
| 11***08 | Tire & Rim Group | 1 |
| 11***84 | Tire; (10.00 X 20-16 Ply) | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
125-9672 Tire & Rim Gp
| 12***72 | Tire & Rim Group | 1 |
| 12***56 | Tire; (10-20) | 1 |
| 22***75 | Rim As | 1 |
111-2005 Tire & Rim Gp
| 11***05 | Tire & Rim Group | 1 |
| 5W***34 | Flap; (Procure Locally) | 1 |
| 5W***21 | Tube-Tire; (Procure Locally) | 1 |
124-3478 Transmission Ar
| 09***17 | Ring-Retaining | 3 |
| 09***34 | Ring-Retaining; (Internal) | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 7 |
121-5940 Universal Joint Gp
| 12***40 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
112-5015 Universal Joint Gp
| 11***15 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
121-5938 Universal Joint Gp
| 12***38 | Universal Joint Group | 1 |
| 5W***58 | Fitting-Grease | 1 |
| 8U***53 | Spider & Bearing As | 2 |
121-7657 Universal Joint Gp
| 12***47 | Universal Joint As | 1 |
| 12***48 | Universal Joint | 1 |
| 12***57 | Universal Joint Group | 1 |
134-0572 Wedge Gp-Wheel
| 13***41 | Bracket As | 1 |
| 13***72 | Wedge Group-Wheel | 1 |
| 13***55 | Wedge | 2 |
Service Equipment And Supplies
148-7041 Film Gp -Environmental
| 10***09 | Film; (Environmental Decal)(Both Sides Under 966f Ii Film) | 2 |
| 14***41 | Film Group; -Environmental | 1 |
122-7266 Plate & Film Gp
| 10***47 | Film-Warning; (Engine Speed Control) | 1 |
| 10***89 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 12***26 | Plate-Warning; (Read Omm) | 1 |
127-9896 Plate & Film Gp
| 10***48 | Film-Warning; (Engine Speed Control) | 1 |
| 10***90 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 12***96 | Plate & Film Group | 1 |
122-7265 Plate & Film Gp
| 10***69 | Plate-Warning; (Read Omm) | 1 |
| 10***63 | Film-Warning; (Engine Speed Control) | 1 |
| 11***55 | Film-Identification; (Environmental Configuration)(German Only) | 2 |
118-6204 Plate & Film Gp
| 11***65 | Film-Warning | 1 |
| 11***39 | Film-Instruction | 1 |
| 11***55 | Film-Instruction | 1 |
118-6214 Plate & Film Gp
| 11***62 | Film-Warning | 1 |
| 11***36 | Film-Instruction | 1 |
| 11***52 | Film-Instruction | 1 |
118-6210 Plate & Film Gp
| 11***63 | Film-Warning | 1 |
| 11***37 | Film-Instruction | 1 |
| 11***53 | Film-Instruction | 1 |
118-6206 Plate & Film Gp
| 11***66 | Film-Warning | 1 |
| 11***40 | Film-Instruction | 1 |
| 11***56 | Film-Instruction | 1 |
118-6202 Plate & Film Gp
| 11***64 | Film-Warning | 1 |
| 11***38 | Film-Instruction | 1 |
| 11***54 | Film-Instruction | 1 |
117-7981 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 5 |
| 10***62 | Film-Instruction; (Washer Fluid) | 2 |
| 11***43 | Film-Warning; (Lifting) | 2 |
118-6212 Plate & Film Gp
| 11***61 | Film-Warning | 1 |
| 11***35 | Film-Instruction | 1 |
| 11***51 | Film-Instruction | 1 |
127-9907 Plate & Film Gp
| 10***62 | Film-Instruction; (Washer Fluid) | 2 |
| 10***46 | Film-Warning; (Engine Speed Control) | 1 |
| 10***90 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
118-6200 Plate & Film Gp
| 10***26 | Plate-Pictograph | 4 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 11***60 | Film-Warning; (Engine)(German) | 1 |
136-3815 Plate & Film Gp
| 11***42 | Film-Warning; (Battery/Jump Start) | 1 |
| 11***45 | Film-Instruction; (Operator Controls) | 1 |
| 11***50 | Film-Instruction; (Refueling Pump) | 1 |
118-6208 Plate & Film Gp
| 11***67 | Film-Warning | 1 |
| 11***41 | Film-Instruction | 1 |
| 11***57 | Film-Instruction | 1 |
Undercarriage
111-1895 Drawbar Gp
| 11***95 | Drawbar Group | 1 |
| 11***39 | Bracket | 1 |
| 5W***85 | Bracket Group-Drawbar | 1 |
123-8819 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***67 | Bracket | 4 |
123-8820 Frame Gp-Undercarriage
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***50 | Guard As | 1 |
Work Tools
106-6757 Adjuster Gp-Bucket
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 10***65 | Shim (1.0mm Thick) | 6 |
| 10***66 | Shim (0.5mm Thick) | 4 |
120-0410 Blade & Mounting Gp
| 09***49 | Washer; (22x60x6-mm Thk) | 8 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 1 |
| 10***81 | Bracket As | 1 |
120-0407 Blade Ar
| 12***07 | Blade Ar | 1 |
| 12***08 | Lines Group-Blade Cylinder | 1 |
| 12***09 | Cylinder Group-Blade | 2 |
128-5803 Bucket & Adjuster Ar -Ditch Cleaning
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***25 | Bucket As-Ditch Cleaning | 1 |
| 12***03 | Bucket & Adjuster Ar; -Ditch Cleaning | 1 |
122-6985 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***43 | Bucket As-Excavation | 1 |
| 12***85 | Bucket & Adjuster Group | 1 |
122-6993 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***49 | Bucket As-Excavation | 1 |
| 12***93 | Bucket & Adjuster Group | 1 |
122-6995 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 12***95 | Bucket & Adjuster Group | 1 |
122-6989 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***47 | Bucket As-Excavation | 1 |
| 12***89 | Bucket & Adjuster Group | 1 |
122-6997 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***35 | Bucket As-Excavation | 1 |
| 12***97 | Bucket & Adjuster Group | 1 |
122-6984 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***42 | Bucket As-Excavation | 1 |
| 12***84 | Bucket & Adjuster Group | 1 |
122-6986 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***44 | Bucket As-Excavation | 1 |
| 12***86 | Bucket & Adjuster Group | 1 |
122-6990 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***48 | Bucket As-Excavation | 1 |
| 12***90 | Bucket & Adjuster Group | 1 |
122-6987 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***45 | Bucket As-Excavation | 1 |
| 12***87 | Bucket & Adjuster Group | 1 |
122-6996 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***37 | Bucket As-Excavation | 1 |
| 12***96 | Bucket & Adjuster Group | 1 |
128-5804 Bucket & Adjuster Gp -Ditch Cleaning
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***26 | Bucket As-Ditch Cleaning | 1 |
| 12***04 | Bucket & Adjuster Group; -Ditch Cleaning | 1 |
122-6998 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***36 | Bucket As-Excavation | 1 |
| 12***98 | Bucket & Adjuster Group | 1 |
122-6992 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 11***42 | Bucket As-Excavation | 1 |
| 12***92 | Bucket & Adjuster Group | 1 |
122-6988 Bucket & Adjuster Gp
| 10***57 | Adjuster Group-Bucket; (Bucket) | 1 |
| 12***46 | Bucket As-Excavation | 1 |
| 12***88 | Bucket & Adjuster Group | 1 |
132-1266 Bucket & Bearing As
| 12***85 | Edge-Cutting | 1 |
| 13***62 | Bucket As-Ditch Cleaning | 1 |
| 13***77 | Plate-Wear | 6 |
121-5554 Bucket As-Ditch Cleaning
| 12***54 | Bucket As-Ditch Cleaning | 1 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
127-8025 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
| 12***25 | Bucket As-Ditch Cleaning | 1 |
121-5556 Bucket As-Ditch Cleaning
| 12***56 | Bucket As-Ditch Cleaning | 1 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
127-8026 Bucket As-Ditch Cleaning
| 12***57 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
| 12***26 | Bucket As-Ditch Cleaning | 1 |
121-5555 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 12***55 | Bucket As-Ditch Cleaning | 1 |
| 12***66 | Reinforcement | 2 |
121-5553 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 12***53 | Bucket As-Ditch Cleaning | 1 |
121-5580 Bucket As-Ditch Cleaning
| 12***80 | Bucket As-Ditch Cleaning | 1 |
| 12***85 | Edge-Cutting | 1 |
| 12***89 | Plate-Lh | 1 |
121-5557 Bucket As-Ditch Cleaning
| 11***22 | Plate-Wear | 6 |
| 12***57 | Bucket As-Ditch Cleaning | 1 |
| 12***85 | Edge-Cutting | 1 |
116-6011 Bucket As-Ditch Cleaning
| 11***11 | Bucket As-Ditch Cleaning | 1 |
| 11***22 | Plate-Wear | 6 |
| 5W***55 | Edge-Cutting | 1 |
122-0185 Bucket As-Excavation
| 12***50 | Edge As | 1 |
| 12***85 | Bucket As-Excavation | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 5 |
110-6738 Bucket As-Excavation
| 11***38 | Bucket As-Excavation | 1 |
| 11***87 | Edge | 1 |
| 12***38 | Edge As | 1 |
122-2145 Bucket As-Excavation
| 11***97 | Edge | 1 |
| 12***45 | Bucket As-Excavation | 1 |
| 12***34 | Edge As | 1 |
110-6877 Bucket As-Excavation
| 11***77 | Bucket As-Excavation | 1 |
| 11***90 | Edge | 1 |
| 12***36 | Edge As | 1 |
122-2149 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***49 | Bucket As-Excavation | 1 |
| 14***83 | Edge As | 1 |
110-6732 Bucket As-Excavation
| 11***32 | Bucket As-Excavation | 1 |
| 11***88 | Edge | 1 |
| 12***31 | Edge As | 1 |
122-2237 Bucket As-Excavation
| 12***45 | Edge As | 1 |
| 12***37 | Bucket As-Excavation | 1 |
| 4K***45 | Plate | 2 |
120-4435 Bucket As-Excavation
| 12***35 | Bucket As-Excavation | 1 |
| 13***16 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 4 |
122-2143 Bucket As-Excavation
| 11***88 | Edge | 1 |
| 12***43 | Bucket As-Excavation | 1 |
| 12***31 | Edge As | 1 |
121-9809 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 12***09 | Bucket As-Excavation | 1 |
| 14***81 | Edge As | 1 |
122-2148 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***48 | Bucket As-Excavation | 1 |
| 14***83 | Edge As | 1 |
112-3713 Bucket As-Excavation
| 11***13 | Bucket As-Excavation | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 14***83 | Edge As | 1 |
110-6731 Bucket As-Excavation
| 11***31 | Bucket As-Excavation | 1 |
| 11***86 | Edge | 1 |
| 12***30 | Edge As | 1 |
120-4436 Bucket As-Excavation
| 12***36 | Bucket As-Excavation | 1 |
| 12***50 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 5 |
121-9808 Bucket As-Excavation
| 12***08 | Bucket As-Excavation | 1 |
| 12***32 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 4 |
122-2142 Bucket As-Excavation
| 12***42 | Bucket As-Excavation | 1 |
| 12***30 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 3 |
122-2234 Bucket As-Excavation
| 12***34 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 4K***45 | Plate | 2 |
122-2236 Bucket As-Excavation
| 12***36 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 3 |
110-6875 Bucket As-Excavation
| 11***75 | Bucket As-Excavation | 1 |
| 11***97 | Edge | 1 |
| 12***34 | Edge As | 1 |
122-2144 Bucket As-Excavation
| 11***01 | Edge | 1 |
| 12***44 | Bucket As-Excavation | 1 |
| 12***32 | Edge As | 1 |
122-2146 Bucket As-Excavation
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 12***46 | Bucket As-Excavation | 1 |
| 14***81 | Edge As | 1 |
112-3712 Bucket As-Excavation
| 11***12 | Bucket As-Excavation | 1 |
| 11***90 | Edge | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
122-0184 Bucket As-Excavation
| 12***84 | Bucket As-Excavation | 1 |
| 13***16 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 4 |
122-2233 Bucket As-Excavation
| 12***33 | Bucket As-Excavation | 1 |
| 13***65 | Edge As | 1 |
| 8E***90 | Adapter-Tip; (J-300, 2-Strap, Center) | 3 |
122-2147 Bucket As-Excavation
| 11***90 | Edge | 1 |
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 6 |
| 12***47 | Bucket As-Excavation | 1 |
116-6642 Bucket As-Excavation
| 11***42 | Bucket As-Excavation | 1 |
| 12***36 | Edge As | 1 |
| 6Y***54 | Adapter-Strap | 6 |
5w-0604 Bucket & Bearing As -Ditch Cleaning
| 12***53 | Bucket As-Ditch Cleaning | 1 |
| 5W***04 | Bucket As.-Ditch Clng; -Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
5w-0605 Bucket & Bearing As -Ditch Cleaning
| 12***54 | Bucket As-Ditch Cleaning | 1 |
| 5W***05 | Bucket As.-Ditch Clng; -Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
5w-2857 Bucket & Bearing As -Ditch Cleaning
| 12***80 | Bucket As-Ditch Cleaning | 1 |
| 5W***09 | Bearing | 2 |
| 5W***57 | Bucket Group.; -Ditch Cleaning | 1 |
110-7284 Coupler Gp-Quick
| 0T***31 | Washer (.1046" Thick); (10.3x19x2.5-mm Thk) | 7 |
| 11***78 | Rod As | 2 |
| 11***79 | Spring | 2 |
4i-7343 Sidecutter Gp
| 09***76 | Nut; (M20x2.5-Thd) | 8 |
| 09***74 | Bolt; (M20x2.5x50-mm) | 8 |
| 4I***43 | Sidecutter Group | 1 |
3g-3237 Tip Gp-Penetration
| 10***08 | Pin-G.E.T. | 1 |
| 3G***37 | Tip Group; -J-300 | 1 |
| 8E***59 | Retainer Assem. | 1 |
4t-2215 Tip Gp-Wide
| 10***00 | Tip-Wide | 1 |
| 13***66 | Pin-G.E.T. | 1 |
| 13***99 | Retainer As | 1 |
8e-3755 Tip Gp
| 8E***55 | Tip Group-Abrasion; -Abrasion | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3758 Tip Gp-Abrasion
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 8E***58 | Tip Group-Abrasion; -J-460, Heavy-Duty | 1 |
8e-3751 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 8E***51 | Tip Group-Long; -J-300, Heavy-Duty | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3750 Tip Gp-Long -J-250
| 8E***50 | Tip Group-Long; -J-250 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3169 Tip Gp-Long -J-250
| 1U***52 | Tip (Long) | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3167 Tip Gp-Long
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
9w-9188 Tip Gp-Penetration
| 13***66 | Pin-G.E.T. | 1 |
| 13***99 | Retainer As | 1 |
| 9W***09 | Tip, Sharp-Center | 1 |
100-6462 Tip Gp-Penetration
| 10***62 | Tip Group-Penetration; -J-250 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9w-9189 Tip Gp-Penetration
| 13***66 | Pin-G.E.T. | 1 |
| 13***99 | Retainer As | 1 |
| 9W***08 | Tip, Sharp-Corner | 1 |
100-6463 Tip Gp
| 10***63 | Tip Group-Penetration; -Penetration - Sharp Corner | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
100-6464 Tip Gp
| 10***64 | Tip Group-Penetration; -Penetration - Sharp Center | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3175 Tip Gp-Short
| 10***08 | Pin-G.E.T. | 1 |
| 1U***01 | Tip ( Short ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
9j-3178 Tip Gp-Short -J-250
| 1U***51 | Tip (Short) | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
101-2927 Tip Gp
| 10***27 | Tip Group-Wide; -J-250 | 1 |
| 3G***50 | Tip, Wide | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
M312 serial number reference
On the M312 the ID plate sits on the right side of the machine, at the base of the cab/frame area (riveted plate, not stamped into sheet metal) - open the cab door and look low on the exterior right side below the window line. Serial numbers are 8 characters: a 3-letter/number prefix plus a 5-digit sequence, e.g. 6TL00234. The first 3 characters are the prefix that ties the unit to its parts and service manual set - read the plate exactly as stamped and match the leading characters against the manual break rather than guessing from serial number alone.
| Prefix | Identifies | Notes |
|---|---|---|
| 6TL | M312 wheeled (mobile) excavator, base/only documented generation | Covers 6TL00001 and up; repair-manual documentation found for this prefix cites a bounded range up through roughly 6TL00409, consistent with a modest total production run. Fitted with the Cat 3054TA engine (turbocharged-aftercooled, about 113 hp / 84 kW). This is the only serial prefix tied to the M312 name in available repair-manual listings and machine records. The M312 was succeeded by the M313C. No second prefix break could be confirmed for M312, so treat 6TL as covering the full run unless your plate shows otherwise - confirm with dealer if your PIN does not start 6TL. |
Frequently asked questions
What engine does the Cat M312 use?
The M312 runs a Cat 3054 series four-cylinder diesel, most commonly the turbocharged variant rated around 84 kW (113 hp) gross. Naturally aspirated 3054 variants exist in the wider engine family, so confirm the rating tag fitted to your specific machine.
What is the operating weight of the Cat M312?
Operating weight runs roughly 13-15 metric tons (about 29,000-33,000 lb), varying with boom style (monoblock vs. two-piece) and undercarriage configuration (blade and outrigger combination fitted). The commonly quoted standard figure is about 13.7 t (30,868 lb).
What replaced the Cat M312?
Caterpillar replaced the M312 with the M313C, then later the M313D with a Cat C4.4 engine, as the wheeled-excavator line moved to newer power and electronics.
What M312 owners discuss
What's the most talked-about quirk with the M312's travel system?
Owners describe the automatic parking brake kicking in mid-travel with no obvious trigger, and the jolt is worse in low/crawl gear. This is a safety interlock working as designed, not a random fault: if transmission clutch pressure drops, the parking brake sets within about ten seconds; if brake-circuit oil pressure sags below normal, a warning horn sounds and the parking brake applies automatically. On an older machine the real fix is tracing why clutch or brake-circuit pressure is low - a tired charge pump, a sticking valve, or an internal leak - rather than treating the brake itself as broken. Because this touches the brake and safety-interlock system, have your dealer verify clutch and brake-circuit pressures with proper gauges before any repair is done.
Is the engine in the M312 known for anything in particular?
The M312 (built roughly 1996-2007) runs Caterpillar's 3054 family, most commonly the turbocharged/aftercooled 3054T or 3054TA rated in the area of 84-87 kW (113-117 hp) gross; depending on the emissions step a given unit was built to, some later machines in this same engine family used electronic injection instead of the earlier mechanical setup, so exact output varies by configuration. Across the 3054 family the most-repeated concern is low oil pressure, usually from a worn oil pump or worn bearings - it's taken seriously because starved rod bearings and, on turbo versions, a starved turbo bearing can lead to a wrecked engine. Owners also flag gear-case oil seepage, occasional stalling, and glow-plug or injector faults that make cold starts harder as the engine ages. Have your dealer confirm oil pressure at idle and at working rpm before trusting an older unit's engine.
How does the M312 handle rough or uneven ground compared to a tracked machine?
Since the M312 rides on wheels rather than tracks, its wear story centers on axles and tires, not track chain and rollers. Owners rate the front axle oscillation as a strong point for this class, letting the machine keep working across rutted or soft ground where a rigid-axle wheel machine would struggle - several describe it shrugging off swampy sites others can't touch. Practical wear points are the tires, which left the factory in a 10.00-20 or 11.00-20 load rating depending on configuration, and the outrigger/blade linkage used to stabilize the machine while digging or lifting - both take cycle wear over time. On heavily used examples, owners point to worn stabilizer and outrigger pins and worn tires as the visible sign of age, rather than the track/roller wear you'd chase on a trackhoe.
What electrical gremlins should I expect on an older M312?
There's no dedicated fault-code list circulating for this exact model, but owners of aging units in this size and era of Cat excavator report a familiar pattern: moisture working into connectors, harness chafing at flex points, and a tired charging system producing intermittent warning lights or hard starts rather than one clean failure. One owner of an older M312 specifically described computer glitches and electrical problems showing up as the machine aged. Treat an erratic panel warning or a no-start-after-sitting complaint as a connector/harness/charging-system check first, not an automatic controller swap.
Does it start well in cold weather?
Reports split. Some owners say the machine starts in a second and works through winter without complaint; others describe a hard-used example that was extremely difficult to start in severe frost. The split tracks with normal wear items on this engine family - glow plug condition, battery and charging health, and fuel filter cleanliness all affect cold starting, so a hard-starting M312 in winter points to routine maintenance items first rather than a design flaw in the machine itself.
Any hydraulics worth watching closely?
Nothing specific to this model turns up by name, but on excavators of this size and vintage generally, the swing-circuit rotary manifold and its seals - at the base of the boom and center of the swing circle - are a well-known wear item, and reseal work there is considered routine rather than a red flag. Beyond that, the usual age-related pattern applies: cylinder or hose seal leaks and slower boom/arm response as seals and filters wear. Because a leaking swing or lift circuit can affect stability under load, have your dealer pressure-test the hydraulic circuits before you sign off on a used unit.
What should I check before buying a used M312?
Check tires for wear/age and inspect axle oscillation pins and bushings for play. Check the outrigger and blade linkage for wear at the pins. Confirm engine oil pressure at idle and at working rpm, since low oil pressure is the main risk flag on this engine family. Test the travel brake through all gears to confirm it doesn't set unexpectedly, and ask for the clutch/brake-circuit pressure readings. Check boom, stick and bucket pins and bushings for play. Try a cold start if possible and note charging-system behavior. Given the production window runs from the mid-1990s to the mid-2000s, most examples are now two to three decades old, so ask for service records rather than assuming any given unit's hydraulics or electrics are still original-condition and problem-free. Because brake performance and oil pressure both affect safety and engine life, have your dealer verify both before you complete a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific M312 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.