Caterpillarintegrated toolcarrier(no series)
Caterpillar IT24F
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar IT24F is a small, integrated-toolcarrier-class wheel loader built on the 924F chassis, combining loader, forklift, and material-handling roles in one machine. It runs a Caterpillar 3114T, a mechanically governed, turbocharged 4.4-liter inline-4 diesel producing about 78.3 kW (105 hp) net, paired with a torque-converter, countershaft powershift transmission. Operating weight runs roughly 9,990-10,100 kg (22,020-22,270 lb) depending on configuration and source. Caterpillar built the IT24F from the mid-1990s through 1999, under serial prefixes 4NN and 6KN. It offered a general-purpose bucket around 1.7 m3, a 4-in-1 multi-purpose bucket, forks, and grapples on a shared eight-bar parallel-lift linkage with an integral quick coupler, plus two-lever or optional single-lever controls, an optional third hydraulic function for grapples, and a standard ROPS cab with optional FOPS rating.
Caterpillar documented the 4NN and 6KN serial series together in the same manual set with no functional difference between them, so the IT24F's core specification held steady through its run rather than getting a mid-life redesign. It sits inside Cat's wider IT-series integrated-toolcarrier lineup, a size range that carried on past the F-series into later generations, though no single model is clearly documented as its direct, named replacement. In the used and parts market today, the IT24F is valued for the flexibility its quick coupler and 4-in-1 bucket give small contractors, municipalities, and rental fleets that need one machine to load, carry pallets, and handle material without swapping equipment. Its pre-electronic 3114T engine and mechanically controlled powershift transmission also make it a comparatively simple, lower-cost machine to keep running without engine ECM diagnostics.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar IT24F specifications
Engine
| Engine model | Cat 3114T turbocharged direct-injection diesel (also listed as 3114 DIT), inline-4 |
| Cylinders | 4 |
| Displacement | 4.4 L (268.5 cu in) |
| Net power (rated) | 78.3 kW (105 hp) |
| Gross power | approx. 80 kW (107 hp) per factory data sheet; figures vary slightly by source |
| Emissions | Meets period international exhaust standards in effect at introduction (pre-Tier era, 1994-1999 production); turbo tuned for reduced smoke |
| Drivetrain | Full-match torque converter (330 mm / 13 in) with countershaft powershift transmission; optional low-speed transmission calibration for higher engine speed at low travel speed |
Weights
| Operating weight | approx. 9,990-10,100 kg (22,020-22,270 lb); varies by configuration and source |
Dimensions
| Transport length | approx. 6.76-6.81 m (22 ft 2 in - 22 ft 4 in) |
| Transport width | approx. 2.32-2.39 m (7 ft 7 in - 7 ft 10 in); varies by tire fitment |
| Transport height (top of ROPS/FOPS) | approx. 3.13-3.15 m (10 ft 3 in - 10 ft 4 in) |
| Wheelbase | 2.70 m (8 ft 10 in) |
| Minimum turning radius (over tires) | 5.11 m (201 in) |
| Articulation angle | 40 degrees each direction |
| Axle oscillation | 12 degrees |
| Standard tire size | 17.5R25 |
Performance
| Travel speed - gear 1 (fwd/rev) | 7.2 km/h (4.5 mph) |
| Travel speed - gear 2 (fwd) | 13.2 km/h (8.2 mph) |
| Travel speed - gear 3 (fwd) | 23.7 km/h (14.7 mph) |
| Travel speed - gear 4 (fwd) | 38.3 km/h (23.8 mph) |
| Bucket pin height at maximum lift | 3.77 m (12 ft 4 in) |
| Rack-back angle at carry | 45 degrees |
| Standard bucket capacity | 1.7 m3 (2.4 cu yd) |
| Implement hydraulic cycle time - raise | 5.3 s |
| Implement hydraulic cycle time - dump | 1.5 s |
| Implement hydraulic cycle time - lower, empty, float down | 4.3 s |
| Implement hydraulic cycle time - total | 11.1 s |
| Implement pump flow | approx. 151 L/min (39.9 US gpm) |
Service capacities (summary)
| Fuel tank | 157 L (41.5 US gal) |
| Cooling system | 35 L (9.3 US gal) |
| Engine oil (crankcase, with filter) | 10.2 L (2.7 US gal) |
| Hydraulic system, including tank | 79 L (20.9 US gal) |
| Hydraulic tank only | 53 L (14 US gal) |
| Transmission | 23 L (6.1 US gal) |
| Front axle | 21 L (5.6 US gal) |
| Rear axle | 21 L (5.6 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
IT24F fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 10.2 L (2.7 US gal) | Cat DEO (Diesel Engine Oil), API CG-4/CH-4 grade. SAE 15W-40 for ambients above about -9.5°C (15°F); switch to SAE 10W-30 below that, down to roughly -20°C. Multigrade DEO covers most climates without a seasonal change. |
| Cooling system | 35.2 L (9.3 US gal) | Full-strength ethylene-glycol antifreeze/coolant meeting Cat's coolant spec for this production era (Cat DEAC); mix ratio set by expected low ambient. Later service fills on this platform reference Cat ELC per current Cat fluids guidance — check which coolant is already in the system before topping off, do not mix types. |
| Fuel tank | 157 L (41.5 US gal) | No. 2-D diesel fuel for normal service; No. 1-D diesel in cold climates below freezing to limit fuel waxing/gelling. |
| Transmission (power shift) | 23.1 L (6.1 US gal) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. SAE 30 for most ambients; Cat TDTO cold-weather (Arctic) blend below about -20°C. |
| Front axle, differential and final drives | 21.2 L (5.6 US gal) | Cat TDTO, TO-4 spec — same grade as the transmission. Applies across standard, No-SPIN, and limited-slip differential options. |
| Rear axle, differential and final drives (oscillating) | 21.2 L (5.6 US gal) | Cat TDTO, TO-4 spec, matching the front axle and transmission fill. |
| Hydraulic system (tank / total system) | Tank refill 53 L (14.0 US gal); total system (tank plus lines and cylinders) about 77-79 L (20.4-20.9 US gal) — varies by configuration/series | Cat TDTO, TO-4 spec, serves as the hydraulic fluid on this machine class, same reservoir grade as the transmission and final drives. Cat HYDO Advanced 10 is an acceptable dedicated hydraulic-oil alternate where a separate hydraulic-specific fluid is preferred. |
| Grease (chassis lubrication points, spec only) | Not capacity-rated — lubricate per the OMM's interval chart | Cat Multipurpose Grease (NLGI 2, lithium-complex) for pins, bushings, and linkage points. Cat Extreme Application (XA) grease where a heavier duty cycle calls for it. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar IT24F maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the IT24F beyond the schedule
Predictive Maintenance & Fluid Analysis
The 3114T has no engine ECM, so there's no fault-code diagnostics to fall back on. Scheduled oil sampling is the main predictive tool: pull an engine oil sample each service to catch coolant intrusion from the 3114T's cylinder liners before it shows up as a milky dipstick. Sample transmission oil to catch valve-body and screen contamination early, since debris buildup there is the leading cause of progressive gear loss. Check hydraulic oil cleanliness given the wear at the eight-bar linkage and quick-coupler pins.
Corrective & Common Repairs
Corroded battery cable terminals are the most common no-crank complaint on these machines, check and clean connections before chasing the starter itself. A neutralizer switch fault at the brake pedal, or its wiring, can kick the transmission into false neutral or cause it to lose gears progressively, inspect the switch and harness first. The steering shaft seal and tilt cylinder rod seal are recurring hydraulic leak points worth checking at every service. Eight-bar linkage and coupler pin-bushing wear shows up as slop in bucket/fork positioning.
Overhaul & Rebuild Points
At major overhaul, inspect the 3114T's cylinder liners and O-ring seals for the coolant-into-oil leak path this block is known for, sleeve or replace as needed rather than just topping up oil. Rebuild the torque converter and transmission clutch packs together, since low charge pressure and clutch wear compound each other on the countershaft powershift unit. Overhaul front and rear axle/final-drive planetaries on the same schedule, both carry roughly equal oil volume and wear evenly. Renew the eight-bar linkage bushings, coupler pins, and tilt/steering cylinder seals as a set.
Seasonal & Environment Servicing
Machines built on 4NN and 6KN serial prefixes offered a factory intake grid heater option, check the element and relay before cold weather if the machine has one, since starting aids on these mechanically-governed engines are limited without it. Verify coolant concentration (Cat DEAC or ELC, depending on original fill) for freeze protection each fall. Drain the fuel/water separator more often in seasons with wide temperature swings, condensation collects fast in the 157 L tank. Front tires carry more toolcarrier load and wear faster than rears, check them often.
IT24F common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2500 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
IT24F fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Flash Code 74 (CID 650 - FMI 02) | Transmission control module reports the machine harness identification code as invalid or erratic. | Damaged, corroded, or loose connector at the harness ID circuit, or chafed wiring near the transmission control module. | Inspect and reseat the harness ID connector and wiring at the transmission controller before condemning the module; retest with the service tool. |
| No engine fault code - 3114T has no engine ECM | The 3114T is a mechanical unit injector engine with a flyweight governor. It has no engine control module, so it never sets a CID/FMI engine code. | Not applicable - the absence of an engine code is normal for this engine, not a fault. | Diagnose engine complaints (power loss, smoke, hard start) mechanically: check governor and fuel rack linkage, injector timing, turbo boost, and compression instead of looking for a stored code. |
| No display code - loss of forward/reverse shift | Transmission will not engage forward or reverse while all other machine functions operate normally. | Low alternator output starving the transmission control circuit of voltage, or a faulty shift-lever signal reaching the controller. | With the engine running, check alternator output and battery voltage at the transmission controller connector before replacing the controller or shift lever. |
| No display code - transmission slips or engages late | A speed or directional clutch slips or engages with a delay, most often reported in the mid gears under load. | Contaminated transmission oil (debris in the filter, screen, or magnet), worn clutch packs, or a sticking modulating solenoid. | Cut open the transmission filter and inspect the magnet for debris, check modulation and clutch pressures at low and high idle, and bench-test the solenoids for correct resistance before teardown. |
| No display code - charging system low or no output | Ammeter or charging indicator shows the alternator is not supplying the electrical system, which can starve the transmission controller and solenoids of proper voltage. | Failed or underperforming alternator, worn drive belt, or a bad connection in the charging circuit. | Confirm alternator output (about 14V on a 12V system) at the battery with the engine running, and repair the charging circuit before chasing transmission symptoms. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
IT24F attachments & work tools
Buckets
General purpose and multi-purpose (4-in-1) buckets are the core work tools for this class, with general purpose profiles around 1.7 m3 (2.2 yd3) heaped. General purpose buckets suit load-and-carry, grading and leveling; multi-purpose buckets add clamping, dozing and fine grading in one tool.
Coupler / mounting system
The machine uses Caterpillar's eight-bar parallel-lift loader linkage (not a Z-bar) with an integral quick coupler built into the arms, letting the operator swap buckets, forks and grapples without leaving the cab. Coupler geometry differs across Cat's integrated-toolcarrier generations, so confirm fit against this exact model and serial range before fitting a tool sourced from a different IT machine.
Forks
Pallet forks mount on the same parallel-lift linkage and quick coupler, keeping tines level through the lift cycle for palletized and bagged material handling. Fork carriage capacity is sized to this small-wheel-loader class rather than to larger toolcarrier models.
Grapples
Industrial and utility grapple forks fit the same coupler for handling brush, logs, rock, and demolition or recycling debris. These need the machine's optional third hydraulic function to power the grapple clamp cylinder.
Broom
An angle broom attachment is offered for windrowing loose debris ahead of and to the side of the machine. Like other powered tools it draws off the auxiliary hydraulic circuit rather than the base lift/tilt circuit.
Hydraulic controls / kit
Standard control is a two-lever arrangement for lift and tilt, with a single-lever control offered as an option. A three-valve hydraulic system is available to power third-function tools such as grapples and multi-purpose buckets.
Ride control
Ride control is an available option that cushions the loader arms over rough terrain during load-and-carry work, reducing spillage and operator fatigue when running bucket or fork attachments.
Cab guarding / ROPS-FOPS
A cab with ROPS is standard for North America and Europe. A cab meeting Falling Object Protective Structure criteria is available for work where overhead material or attachment hazards apply, such as grapple or debris-handling work.
All IT24F assemblies by section
Every catalogued assembly group for the Caterpillar IT24F. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7c-6234 Air Cleaner Gp
| 0A***26 | Fitting | 1 |
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
6i-2555 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***55 | Air Cleaner Group | 1 |
7c-2290 Cover Gp-Inlet Manifold
| 6V***19 | Bolt; (M8x1.25x40-mm) | 14 |
| 7C***51 | Gasket | 1 |
| 7C***90 | Cover Group-Inlet Manifold; Inlet Manifold Cover Group | 1 |
7c-6230 Lines Gp-Air
| 4P***29 | Hose-Air Inlet | 1 |
| 6I***12 | Elbow-Exhaust | 1 |
| 7C***30 | Coupling | 1 |
4w-6609 Lines Gp-Air
| 14***01 | Clamp | 4 |
| 4W***09 | Lines Group-Air; Air Lines Group | 1 |
| 7C***19 | Hose | 2 |
1w-8898 Manifold Gp-Exhaust
| 0L***64 | Lock --To Reverse Driven Gear Splash Pan; -- To Reverse Driven Gear Splash Pan | 2 |
| 15***35 | Lock | 2 |
| 1W***98 | Manifold Group-Exhaust; Exhaust Manifold Group | 1 |
4p-4879 Manifold Gp-Inlet
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***45 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
7c-6229 Muffler Gp
| 10***70 | Clamp-Bent Bolt | 1 |
| 7C***29 | Muffler Group | 1 |
| 7C***50 | Pipe Group-Extension | 1 |
4m-0310 Precleaner Gp
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
| 4M***10 | Precleaner As | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
114-3601 Turbocharger Gp
| 11***01 | Turbocharger Group | 1 |
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***67 | Clamp As | 1 |
113-6195 Turbocharger Gp
| 11***95 | Turbocharger Group | 1 |
| 11***01 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
7e-3686 Balancer Gp
| 3B***98 | Key-Woodruff | 1 |
| 3D***58 | Ring-Retaining | 4 |
| 4B***83 | Ball 11.10 mm(.437 In.) Dia. | 1 |
142-7297 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 14***97 | Camshaft Group; (Single) | 1 |
| 14***98 | Camshaft Assem. | 1 |
4w-4865 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 4W***65 | Camshaft Group-Single; (Single) | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
1w-8897 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 1W***97 | Cover Group-Cylinder Block; Cylinder Block Cover Group | 1 |
7w-9847 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
7w-7337 Cover Gp-Valve Mechanism
| 11***50 | Gasket | 1 |
| 11***63 | Cover | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 10 |
4w-3579 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***08 | Bearing-Main; (Standard) | 1 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
4w-3724 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 4P***57 | Jet As-Piston Cooling | 4 |
| 4W***24 | Cylinder Block Group; Cylinder Block Group | 1 |
7e-5311 Cylinder Block Gp
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
9y-6164 Cylinder Head As
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 4P***50 | Seal-Valve Stem | 8 |
7w-5664 Cylinder Head Gp
| 1W***13 | Insert-Valve Seat; (Exhaust) | 4 |
| 7W***64 | Cylinder Head As | 1 |
| 7W***49 | Sleeve | 4 |
115-4163 Cylinder Head Gp
| 11***63 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 4 |
| 1W***13 | Insert-Valve Seat; (Exhaust) | 4 |
115-4164 Cylinder Head Gp
| 11***63 | Cylinder Head As | 1 |
| 11***64 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 8 |
9y-8849 Cylinder Head Gp
| 10***79 | Valve-Exhaust | 4 |
| 1W***15 | Lock-Retainer; (Inlet) | 16 |
| 4P***50 | Seal-Valve Stem | 8 |
9y-8872 Cylinder Head Gp
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 4P***91 | Gasket-Cylinder Head (1.85mm Thk); (1.85-mm Thk) | 1 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***38 | Pulley As-Idler | 1 |
9y-9511 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***97 | Bolt; (M12x1.75x40-mm)(Locking) | 8 |
7e-3756 Gear Gp-Front
| 2W***65 | Shaft-Idler | 1 |
| 2W***66 | Bearing-Sleeve | 1 |
| 2W***76 | Gear Assem. (50 Teeth) (Camshaft Idler) | 1 |
7e-8774 Housing Gp-Flywheel
| 10***52 | Housing-Flywheel | 1 |
| 2P***94 | Plug-Sealing | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
4p-4740 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 4 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
7c-6237 Mounting Gp-Engine & Xmsn
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 1 |
| 5G***65 | Support Assem. | 1 |
| 7C***75 | Support | 2 |
129-7259 Pan Gp-Oil
| 10***21 | Pan-Oil | 1 |
| 11***72 | Gasket-Oil Pan | 1 |
| 12***59 | Pan Group-Oil | 1 |
7c-5402 Pan Gp-Oil
| 10***21 | Pan-Oil | 1 |
| 11***72 | Gasket-Oil Pan | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
115-4084 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 11***84 | Piston & Rod Group | 1 |
108-5758 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 10***58 | Piston & Rod Group | 1 |
7c-6232 Pulley Gp-Fan & Alt Drive
| 6I***74 | Pulley-Fan Drive | 1 |
| 6N***43 | V-Belt Set; 1918 mm (75.5 In.) Lg-Includes 2 Belts | 1 |
| 7C***29 | Pulley-Alternator | 1 |
9y-4914 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 8T***66 | Bolt; (M14x2x60-mm)(M14) | 4 |
| 9Y***48 | Pulley-Crankshaft | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
7e-7590 Seal Gp-Crankshaft
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 7E***89 | Seal Group-Crankshaft | 1 |
| 7E***90 | Seal Group-Crankshaft; Crankshaft Seal Group | 1 |
115-4210 Seal Gp-Crankshaft
| 11***10 | Seal Group-Crankshaft | 1 |
| 22***10 | Seal Group-Crankshaft; (Clockwise Rotation) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
7c-1770 Seal Gp-Flywheel Housing
| 1U***46 | Sealant (For Locations A) | 0 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Braking System
114-1151 Accumulator Gp-Brake -Charged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
149-5532 Accumulator Gp-Hydraulic -Uncharged-Brake
| 14***32 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 1V***72 | Spring-Extension | 1 |
| 3K***56 | Spring (2.34" Long Free Length) | 1 |
9c-5973 Brake Gp-Parking
| 9C***65 | Brake Group-Parking; Parking Brake Group(Bendix) | 1 |
| 9C***73 | Brake Group-Parking; Parking Brake Group(Akebono) | 2 |
9c-8683 Brake Gp-Parking
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***17 | Switch As-Limit; (Stop Light) | 1 |
| 10***18 | Switch As-Limit; (Transmission Neutralizer) | 1 |
9c-5965 Brake Gp-Parking
| 6W***12 | Plate Assem. | 1 |
| 6W***13 | Spring; (Shoe To Shoe) | 1 |
| 6W***14 | Spring; (Shoe Return) | 1 |
8r-8529 Control Gp-Foot Brake
| 8R***29 | Control Group-Foot Brake | 1 |
156-1590 Control Gp-Foot Brake
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 15***90 | Control Group-Foot Brake | 1 |
| 2H***22 | Lockwasher | 1 |
134-5099 Control Gp-Foot Brake
| 11***44 | Valve Group-Brake Control; -Service | 1 |
| 13***99 | Control Group-Foot Brake | 1 |
| 15***91 | Base As | 1 |
147-3394 Control Gp-Parking Brake
| 09***12 | Hose As | 1 |
| 10***73 | Clip | 4 |
| 10***04 | Tee | 1 |
9u-2442 Control Gp-Parking Brake
| 13***10 | Lever Assem. | 1 |
| 13***30 | Angle | 1 |
| 14***90 | Bracket As | 1 |
111-6928 Control Gp-Service Brake
| 09***12 | Hose As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***73 | Clip | 4 |
100-3414 Pump Gp-Vane -Brake
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 09***43 | Body | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 4 |
128-7228 Pump Gp-Vane -Brake
| 12***28 | Pump Group-Vane; -Brake | 1 |
| 14***43 | Seal Kit | 1 |
| 23***69 | Repair Kit-Brake | 1 |
119-6744 Valve Gp-Brake Control -Service
| 11***44 | Valve Group-Brake Control; -Service | 1 |
| 4E***24 | Pin Assem. | 4 |
| 7X***18 | Washer-Hard; (13.5x40x5-mm Thk) | 4 |
Cooling System
4w-4869 Cooler Gp-Engine Oil
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
7c-6228 Fan Gp-Blower
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 8 |
| 7C***67 | Adapter-Fan | 1 |
| 7C***28 | Fan Group-Blower | 1 |
7c-1567 Lines Gp-Water
| 12***48 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 15***99 | Clamp; (Hose) | 2 |
150-1998 Lines Gp-Water
| 12***48 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 15***98 | Lines Group-Water | 1 |
9c-9210 Mounting Gp-Radiator
| 00***43 | Pin As | 1 |
| 03***12 | Rivet (To Fuel Tank) | 13 |
| 1A***57 | Pin--Yoke End | 2 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
110-4347 Radiator & Hyd Oil Cooler Gp
| 11***47 | Radiator & Oil Cooler Group | 1 |
| 8N***46 | Neck-Filler | 1 |
| 8T***21 | Nut-Weld (M8x1.25 Thd) | 14 |
116-0808 Radiator Gp
| 10***21 | Clamp | 4 |
| 11***47 | Radiator & Oil Cooler Group | 1 |
| 11***08 | Radiator Group | 1 |
7c-6231 Radiator Gp
| 10***21 | Clamp | 4 |
| 11***47 | Radiator & Oil Cooler Group | 1 |
| 1B***87 | Washer 4.7mm(.188in) Thick; (14.3x58.7x5-mm Thk) | 2 |
9t-8913 Valve Gp-Check -Hydraulic Oil Cooler Bypass
| 9T***47 | Ring | 1 |
| 9T***48 | Ring | 1 |
| 9T***49 | Seal | 1 |
9t-8136 Valve Gp-Check -Hydraulic Oil Cooler Bypass
| 9T***36 | Valve Group-Check; -Hydraulic Oil Cooler Bypass | 1 |
| 9T***13 | Valve Group-Check; -Hydraulic Oil Cooler Bypass | 1 |
136-0552 Valve Gp-Check
| 13***52 | Valve Group-Check | 1 |
| 2U***56 | Kit-Seal; (Incls Ring + Seal) | 1 |
| 9T***48 | Ring | 1 |
134-1361 Valve Gp-Check
| 13***61 | Valve Group-Check | 1 |
| 13***52 | Valve Group-Check | 1 |
| 8C***12 | Ring-Retaining | 1 |
9t-7634 Valve Gp-Check -Makeup
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 9T***34 | Valve Group-Check; -Makeup | 1 |
Electrical And Starting System
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
7c-6235 Alternator Gp-Charging
| 13***21 | Bolt-Hex Head; (M10x1.5x120mm) | 1 |
| 3P***11 | Spacer (11.13mm Thk); (11.13-mm Thk) | 1 |
| 4P***18 | Plate Assem. | 1 |
111-6932 Battery & Wiring Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 11***32 | Battery & Wiring Group | 1 |
| 11***62 | Harness As | 1 |
112-7167 Battery Gp
| 11***67 | Battery Group; -12-Volt, 900-Ampere | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
112-7166 Battery Gp
| 11***66 | Battery Group; -12-Volt, Maintenance Free | 1 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 3T***60 | Battery | 2 |
8y-7609 Circuit Breaker Gp
| 01***80 | Lockwasher | 2 |
| 03***14 | Screw; (10-32x1-In) | 2 |
| 08***18 | Seal-O-Ring | 1 |
3e-7843 Control Gp-Position -Work Tool
| 3E***43 | Control Group-Bucket Positioner; (Bucket Positioner) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
3e-7844 Control Gp-Lift Kickout
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***44 | Control Group-Lift Kickout; (Lift Kickout) | 1 |
7t-8000 Converter Gp-Electrical
| 13***46 | Converter Group-Electrical; (24-Volt To 12-Volt) | 1 |
| 13***55 | Harness As | 1 |
| 15***07 | Plate As | 1 |
114-7143 Converter Gp-Electrical
| 11***43 | Converter Group-Electrical | 1 |
| 12***87 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
9x-3294 Heater Gp-Jacket Water
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
8y-8993 Starting Aid Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
| 3E***32 | Valve Group-Ether Starting; (24-Volt) | 1 |
3t-8724 Heater Gp-Jacket Water
| 12***86 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 3T***24 | Heater Group-Jacket Water | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
9x-1439 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
3e-6466 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
130-3453 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***53 | Lamp Group-Signal; -Stop, Tail | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 3 |
3e-6467 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***67 | Lamp Group-Signal; -Rear Turn; Stop, Tail | 1 |
9x-9556 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
| 8T***33 | Nut (M10x1.50 Thd) | 2 |
9c-8242 Lighting Gp-Flood -2-Lamp, Cab, Front
| 13***53 | Lamp Group-Signal; -Stop, Tail | 2 |
| 4E***16 | Plate Assem. | 1 |
| 4E***97 | Spacer; (M6x1-Thd) | 4 |
8r-3602 Lighting Gp-Flood -2-Lamp, Rops Front
| 4B***48 | Nut (10-32 Thd) | 4 |
| 4E***30 | Harness As-Lighting; (Cab Flood, Inner) | 2 |
| 8R***02 | Lighting Group-Flood; -2-Lamp, Rops Front-Engine | 1 |
116-0894 Lighting Gp-Flood
| 10***46 | Cover | 1 |
| 10***47 | Bracket As | 1 |
| 11***94 | Lighting Group-Flood; Lighting Gp-4 Lamp | 1 |
116-0896 Lighting Gp-Signal
| 10***46 | Cover | 1 |
| 10***47 | Bracket As | 1 |
| 11***96 | Lighting Group-Signal | 1 |
142-2382 Lighting Gp-Warning Beacon
| 14***68 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
| 14***82 | Lighting Group-Warning Beacon | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
142-2383 Lighting Gp-Warning Beacon
| 14***83 | Lighting Group-Warning Beacon | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
| 2P***75 | Seal-O-Ring | 2 |
116-0898 Lighting Gp-Warning Beacon
| 11***98 | Lighting Group-Warning Beacon | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
8r-4861 Receptacle Gp-Auxiliary Start
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
193-0421 Sensor Gp-Speed -Torque Converter Output
| 15***52 | Solenoid As; (Fuel Shutoff) | 1 |
| 19***21 | Sensor Group-Speed; -Torque Converter Output | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
7c-4028 Solenoid Gp-Shutoff -Fuel
| 10***61 | Elbow | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***66 | Wire As | 1 |
8r-2602 Starting Aid Gp-Ether
| 2P***04 | Bearing | 1 |
| 3E***53 | Cover-Starting Motor | 1 |
| 3E***54 | Bushing-Starting Motor | 1 |
3e-5381 Starting Motor Gp-Electric
| 3E***81 | Starting Motor Group-Electric | 2 |
| 3K***57 | Gasket | 1 |
| 8R***92 | Wire Assem. | 1 |
7e-3562 Starting Motor Gp-Electric
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7E***62 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
7n-8001 Switch Gp-Toggle
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 2H***20 | Lockwasher (11.38mm Id) | 1 |
175-2324 Switch Gp-Magnetic -Air Inlet Heater Relay
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
3e-0075 Switch Gp-Magnetic -Air Inlet Heater Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
| 6T***32 | Lockwasher 15.08mm(.59in.)O.D. | 1 |
116-0876 Switch Gp-Wiper
| 11***76 | Switch Group-Wiper | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
3e-0155 Switch Gp-Wiper -Intermittent-Front
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
116-0874 Switch Gp-Wiper
| 10***08 | Harness Assem. | 1 |
| 11***74 | Switch Group-Wiper | 1 |
| 3E***55 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
8r-4113 Warning Gp-Backup
| 10***89 | Harness As | 1 |
| 12***78 | Harness Assembly | 1 |
| 14***85 | Harness As | 1 |
9c-9208 Wiring Gp-Power Train
| 4E***07 | Harness As | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 9 |
| 5P***39 | Grommet | 2 |
9c-8251 Wiring Gp-Cab
| 12***93 | Plate As | 1 |
| 13***26 | Harness As | 1 |
| 13***94 | Plate As | 1 |
116-0909 Wiring Gp-Front
| 10***89 | Harness As | 1 |
| 11***09 | Wiring Group-Front | 1 |
| 4B***48 | Nut (10-32 Thd) | 4 |
116-0893 Wiring Gp-Open Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***98 | Harness As | 1 |
| 10***23 | Harness As | 1 |
9c-9209 Wiring Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 1 |
116-0854 Wiring Gp-Transmission Control
| 10***92 | Gear Group-Bevel | 1 |
| 11***54 | Wiring Group-Transmission Control | 1 |
| 11***78 | Housing Group-Fixed Axle; (Front) | 1 |
Engine Arrangement
143-4849 Engine Ar
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 10***32 | Pump Group-Fuel Injection | 4 |
| 11***83 | Governor Group-Unit Injector | 1 |
114-4507 Engine Ar
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 10***32 | Pump Group-Fuel Injection | 4 |
| 10***58 | Piston & Rod Group | 4 |
116-0804 Installation Ar-Engine
| 11***04 | Installation Ar-Engine | 1 |
| 7C***28 | Fan Group-Blower | 1 |
| 7C***30 | Lines Group-Air | 1 |
Frame And Body
4e-2552 Counterweight Gp
| 4E***52 | Counterweight Group | 1 |
| 7C***29 | Muffler Group | 1 |
| 7C***32 | Pulley Group | 1 |
116-0816 Enclosure Ar-Hood
| 11***16 | Enclosure Ar-Hood | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
| 6V***24 | Nut-Weld; (M10x1.5-Thd) | 6 |
116-0809 Enclosure Ar-Hood
| 11***09 | Enclosure Ar-Hood | 1 |
| 11***17 | Hood & Guard Group | 1 |
| 7C***29 | Muffler Group | 1 |
9c-5105 Fender Gp
| 11***80 | Sheet Assem. | 1 |
| 11***11 | Angle Assem. | 2 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
9c-9214 Firewall Gp
| 10***70 | Frame As-Stud | 1 |
| 7T***99 | Link | 15 |
| 7X***50 | Stud-Weld; (M12x1.75x31.75-mm Oal) | 8 |
9c-8907 Frame Gp-Front
| 11***05 | Frame Assem. | 1 |
| 11***09 | Hitch As-Upper | 1 |
| 3B***17 | Pin,Cotter Governor And Decelerator Control | 1 |
111-6904 Frame Gp-Rear
| 10***80 | Spacer; (13x20x7-mm Thk) | 4 |
| 11***04 | Frame Group-Rear | 1 |
| 4E***17 | Plate Assem. | 1 |
9c-4713 Guard Gp-Crankcase
| 10***80 | Spacer; (13x20x7-mm Thk) | 8 |
| 4E***54 | Plate | 1 |
| 4E***76 | Plate Assem. | 1 |
9c-5814 Guard Gp-Power Train
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 1 |
| 3F***05 | Seal-Lip Type | 2 |
| 5B***16 | Fitting-Hydraulic; (Articulation) | 1 |
9c-3847 Hitch Gp-Articulating
| 05***89 | Grommet | 2 |
| 10***87 | Bracket Assem. | 2 |
| 10***56 | Hinge | 1 |
116-0817 Hood & Guard Gp
| 11***17 | Hood & Guard Group | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 12 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 12 |
9c-9207 Hood & Guard Gp
| 05***89 | Grommet | 2 |
| 10***87 | Bracket Assem. | 2 |
| 10***56 | Hinge | 1 |
9c-9213 Ladder Gp
| 12***30 | Hose As | 1 |
| 2V***86 | Hose Assem. 63.50 cm(25 In.) | 2 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 8 |
111-6913 Lines Gp-Grease
| 11***13 | Lines Group-Grease | 1 |
| 5P***37 | Pin (Lock) | 2 |
| 5V***99 | Pin | 2 |
7v-3656 Link Gp-Steering Frame Lock
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
Fuel System
7w-8600 Control Gp-Fuel Injection
| 17***70 | Control Assem. | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
| 7W***00 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
7e-9912 Control Gp-Governor
| 4P***46 | Lever Assem. | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***83 | Spring | 2 |
9c-9469 Control Gp-Governor
| 1V***41 | Seal | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
| 5K***78 | Clip | 1 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
130-7326 Governor Gp-Unit Injector
| 10***90 | Spring-Air Side | 1 |
| 10***92 | Spring-Servo | 1 |
| 10***93 | Spring-Return | 1 |
113-6187 Governor Gp-Unit Injector
| 10***91 | Spring-Oil Side | 1 |
| 10***71 | Governor Group-Unit Injector | 1 |
| 10***72 | Cam Assem. | 1 |
100-8271 Governor Gp-Unit Injector
| 10***87 | Cover-Fuel Ratio Control | 1 |
| 10***88 | Stop-Preload | 1 |
| 10***89 | Retainer-Diaphragm | 1 |
113-6183 Governor Gp-Unit Injector
| 11***83 | Governor Group-Unit Injector | 1 |
| 11***87 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
4e-9756 Lines Gp-Fuel
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 4E***56 | Lines Group-Fuel | 1 |
6i-2694 Lines Gp-Fuel Filter
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
141-6377 Lines Gp-Fuel Filter
| 10***29 | Hose; (60-cm) | 0 |
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Base As-Fuel Filter | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***80 | Tube Assem. | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
1w-3791 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
4p-8424 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 1W***91 | Pump Group-Fuel Priming | 1 |
| 2H***29 | Ring - Retaining External | 1 |
157-3569 Pump Gp-Fuel Prm & Prim Filter
| 14***83 | Separator Group-Water | 1 |
| 15***69 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 15***32 | Tube Assem. | 1 |
133-1213 Pump Gp-Fuel Prm & Water Sep
| 12***63 | Pump Group-Fuel Prm & Water Sep | 1 |
| 13***13 | Pump Group-Fuel Prm & Water Sep | 1 |
| 2Q***89 | Tube As | 1 |
129-6763 Pump Gp-Fuel Prm & Water Sep
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
| 11***18 | Ring-Retaining | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
9c-9871 Tank Gp-Fuel
| 14***33 | Sender As-Fuel Level | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3F***34 | Baffle; (Fuel Tank Fill Cap) | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Hydraulic System
110-6141 Valve Gp-Pilot Cartridge
| 10***37 | Plunger | 1 |
| 10***46 | Seat-Spring | 1 |
| 11***41 | Capsule As-Plunger | 1 |
120-5321 Valve Gp-Pilot Cartridge
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 11***96 | Relife Valve Group | 1 |
| 11***97 | Check Valve Group | 1 |
6e-6477 Cartridge Gp-Vane Pump -Implement
| 10***61 | Lever As-Control Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 8 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
137-1442 Conversion Gp-Field
| 10***61 | Lever As-Control Valve | 1 |
| 13***42 | Conversion Group-Field; -Control Valve | 1 |
| 14***59 | Valve Group-Pilot | 1 |
116-0827 Cooler Ar-Hydraulic Oil
| 11***27 | Cooler Ar-Hydraulic Oil | 1 |
| 11***44 | Lines Group-Hydraulic Oil Cooler | 1 |
| 9Y***49 | Cooler Group-Hydraulic Oil | 1 |
116-0943 Cooler Ar-Hydraulic Oil
| 11***43 | Cooler Ar-Hydraulic Oil | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
| 7X***39 | Bolt; (M8x1.25x110-mm) | 4 |
9y-4949 Cooler Gp-Hydraulic Oil
| 6W***60 | Dowel | 2 |
| 6W***61 | Pin | 2 |
| 9T***23 | Cylinder Group-Pin Coupler | 1 |
9c-9460 Cylinder & Mtg Gp-Coupler
| 10***20 | Cylinder Group-Lift | 1 |
| 7K***04 | Seal (In The Cylinder Mounting Hole) | 2 |
| 9C***60 | Cylinder & Mounting Group-Coupler | 1 |
8r-0442 Cylinder & Seal Gp-Tilt
| 13***80 | Cylinder Group-Tilt | 1 |
| 7K***03 | Seal-Lip Facing Away From Bearing | 2 |
| 8R***42 | Cylinder & Seal Group | 1 |
8r-0441 Cylinder & Seal Gp-Lift
| 7K***03 | Seal-Lip Facing Away From Bearing | 2 |
| 8R***41 | Cylinder & Seal Group-Lift | 1 |
| 9T***26 | Cylinder Group-Tilt | 1 |
129-1904 Cylinder & Seal Gp-Tilt
| 12***04 | Cylinder & Seal Group-Tilt | 1 |
| 6E***94 | Rod-Piston | 2 |
| 9T***18 | Seal Kit (Consist Of Seal And Ring) | 1 |
100-7020 Cylinder Gp-Lift
| 10***20 | Cylinder Group-Lift | 1 |
| 12***79 | Head | 1 |
| 13***73 | Piston | 1 |
134-1379 Cylinder Gp-Lift
| 13***79 | Cylinder Group-Lift | 1 |
| 2K***30 | Ring-Back-Up | 1 |
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 1 |
9t-8823 Cylinder Gp-Coupler
| 10***23 | Cylinder As | 1 |
| 10***15 | Rod As | 1 |
| 10***17 | Washer; (36.7x77x6-mm Thk) | 1 |
9t-7026 Cylinder Gp-Tilt
| 13***80 | Piston | 1 |
| 13***87 | Cylinder As | 1 |
| 13***00 | Rod As | 1 |
134-1381 Cylinder Gp-Tilt
| 13***81 | Cylinder Group-Tilt | 1 |
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
134-1380 Cylinder Gp-Tilt
| 11***49 | Lug | 2 |
| 13***80 | Piston | 1 |
| 13***80 | Cylinder Group-Tilt | 1 |
196-4191 Fitting Gp-Hydraulic -Quick Disconnect
| 11***06 | Valve & Mtg Group-Control | 1 |
| 11***18 | Pump & Mtg Group-Hydraulic | 1 |
| 11***58 | Lines Group-Hydraulic | 1 |
116-0947 Hydraulic Ar
| 11***04 | Lines Group-Pilot | 1 |
| 11***47 | Hydraulic Ar | 1 |
| 11***48 | Lines Group-Front | 1 |
116-0902 Hydraulic Ar
| 11***04 | Lines Group-Pilot | 1 |
| 11***02 | Hydraulic Ar | 1 |
| 11***46 | Lines Group-Tilt Cylinder | 1 |
116-0949 Hydraulic Ar
| 11***48 | Lines Group-Front | 1 |
| 11***49 | Hydraulic Ar | 1 |
| 11***54 | Lines Group-Ride Control | 1 |
116-0951 Hydraulic Ar-Ride Control
| 11***46 | Lines Group-Tilt Cylinder | 1 |
| 11***51 | Hydraulic Ar-Ride Control | 1 |
| 11***54 | Lines Group-Ride Control | 1 |
116-0955 Hydraulic Ar-Ride Control
| 11***55 | Hydraulic Ar-Ride Control | 1 |
| 12***81 | Shaft As | 1 |
| 12***83 | Tube | 1 |
8r-0443 Kickout & Positioner Gp
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 4 |
| 2P***93 | Locknut-Bulkhead; (1 3/16-12 Thd) | 2 |
137-1437 Kit-Fourth Function Hydraulic
| 10***52 | Tube As | 1 |
| 11***15 | Hose As | 1 |
| 11***61 | Harness As | 1 |
137-1434 Kit-Ride Control
| 10***23 | Valve Group-Load Control | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***34 | Kit-Ride Control | 1 |
127-1062 Lines Gp-Check Valve
| 09***63 | Hose As | 1 |
| 11***23 | Guard | 1 |
| 11***14 | Hose As | 2 |
138-7794 Lines Gp-Coupler -Quick
| 10***62 | Tube As | 1 |
| 10***65 | Tube As | 1 |
| 13***94 | Lines Group-Coupler; -Quick | 1 |
116-0960 Lines Gp-Coupler -Quick
| 09***63 | Hose As | 1 |
| 11***23 | Guard | 1 |
| 11***16 | Bracket | 2 |
111-7010 Lines Gp-Coupler
| 09***63 | Hose As | 1 |
| 09***41 | Pin-Cotter | 1 |
| 11***23 | Guard | 1 |
116-0948 Lines Gp-Front
| 11***50 | Hose Assem. | 1 |
| 11***51 | Manifold Assem. | 1 |
| 11***48 | Lines Group-Front | 1 |
116-0958 Lines Gp-Hydraulic
| 11***50 | Hose Assem. | 1 |
| 11***51 | Manifold Assem. | 1 |
| 11***09 | Hose | 2 |
116-0945 Lines Gp-Hydraulic
| 11***45 | Lines Group-Hydraulic | 1 |
| 2P***93 | Locknut-Bulkhead; (1 3/16-12 Thd) | 2 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 2 |
9u-0298 Lines Gp-Hydraulic
| 11***50 | Hose Assem. | 1 |
| 11***51 | Manifold Assem. | 1 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 1 |
116-0826 Lines Gp-Hydraulic Oil Cooler
| 11***50 | Hose Assem. | 1 |
| 11***51 | Manifold Assem. | 1 |
| 11***09 | Hose | 2 |
116-0944 Lines Gp-Hydraulic Oil Cooler
| 11***50 | Hose Assem. | 1 |
| 11***51 | Manifold Assem. | 1 |
| 11***09 | Hose | 2 |
9u-0295 Lines Gp-Lift Cylinder
| 10***86 | Hose Assem. | 1 |
| 10***73 | Clip | 2 |
| 11***18 | Hose Assem. | 2 |
116-0982 Lines Gp-Pilot
| 10***52 | Bracket | 1 |
| 10***52 | Tube As | 1 |
| 11***82 | Lines Group-Pilot | 1 |
110-8804 Lines Gp-Pilot
| 10***86 | Hose Assem. | 1 |
| 10***73 | Clip | 2 |
| 11***04 | Lines Group-Pilot | 1 |
116-0954 Lines Gp-Ride Control
| 10***52 | Bracket | 1 |
| 10***52 | Tube As | 1 |
| 11***54 | Lines Group-Ride Control | 1 |
116-0946 Lines Gp-Tilt Cylinder
| 10***90 | Clapper | 2 |
| 10***39 | Coil Assem. | 2 |
| 11***46 | Lines Group-Tilt Cylinder | 1 |
224-8604 Magnet Gp-Pilot Valve
| 11***91 | Pump Group-Piston & Vane | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
| 22***04 | Magnet Group-Pilot Valve | 1 |
110-8818 Pump & Mtg Gp-Hydraulic
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***14 | Pump Group-Vane; -Brake | 1 |
| 10***52 | Pump Group-Piston; -Steering | 1 |
114-3091 Pump Gp-Piston & Vane
| 11***18 | Gasket | 1 |
| 11***19 | Gasket | 1 |
| 11***19 | Tank Assem. | 1 |
111-9320 Tank & Filter Gp-Hydraulic
| 10***12 | Tube | 4 |
| 11***48 | Plate | 2 |
| 11***20 | Tank & Filter Group-Hydraulic | 2 |
9c-8047 Tank & Mtg Gp-Hydraulic
| 11***92 | Valve Group-Bank 3 | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 3 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 3 |
110-8806 Valve & Mtg Gp-Control
| 10***25 | Valve Group-Relief; (Line, Tilt) | 1 |
| 11***06 | Valve & Mtg Group-Control | 1 |
| 11***88 | Valve Group-Control | 1 |
6e-0732 Valve Gp-Pilot Cartridge
| 03***28 | Seal-O-Ring | 1 |
| 10***27 | Seat-Spring | 1 |
| 1G***27 | Kit-Seal; (Metering Capsule)(Includes Seals & Rings) | 1 |
111-7192 Valve Gp-Bank 3
| 11***92 | Valve Group-Bank 3 | 1 |
| 11***88 | Valve Group-Control | 1 |
| 11***89 | Valve Group-Control | 1 |
118-9088 Valve Gp-Control
| 11***09 | Cap-End | 1 |
| 11***70 | Cap-Retainer | 1 |
| 11***94 | Tube | 1 |
122-8872 Valve Gp-Control
| 12***72 | Valve Group-Control; (Lift) | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 4T***20 | Housing-Spring | 1 |
118-9089 Valve Gp-Control
| 10***87 | Bolt-Shoulder | 1 |
| 11***96 | Nut; (1/2) | 1 |
| 11***16 | Retainer | 1 |
9t-8775 Valve Gp-Diverter
| 1U***27 | Guide-Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7B***39 | Spring | 1 |
8r-9184 Valve Gp-Drain
| 10***79 | Valve Group-Counterbalance | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 6T***46 | Valve Group-Solenoid; (Axle Oil Cooler) | 1 |
100-2823 Valve Gp-Load Control
| 10***23 | Valve Group-Load Control | 1 |
| 10***97 | Plate As-Mounting | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
108-3927 Valve Gp-Pilot
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
107-9088 Valve Gp-Pilot -Lift
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
167-0736 Valve Gp-Pilot
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***92 | Sleeve | 1 |
| 10***90 | Clapper | 3 |
107-9090 Valve Gp-Pilot -Auxiliary
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***92 | Sleeve | 1 |
| 10***30 | Spring | 4 |
107-9598 Valve Gp-Pilot
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
6e-2985 Valve Gp-Pilot
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
145-0059 Valve Gp-Pilot
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***92 | Sleeve | 1 |
| 10***90 | Clapper | 3 |
107-9089 Valve Gp-Pilot -Tilt
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
6e-2984 Valve Gp-Pilot -3-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***98 | Valve Group-Pilot | 1 |
| 10***27 | Valve Group-Pilot; -Auxiliary | 1 |
107-3828 Valve Gp-Pilot Cartridge
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 1 |
| 10***37 | Plunger | 1 |
| 10***46 | Seat-Spring | 1 |
110-1244 Valve Gp-Pilot Cartridge
| 10***46 | Seat-Spring | 1 |
| 10***58 | Plunger | 1 |
| 10***59 | Spring | 1 |
111-7299 Valve Gp-Pressure Reducing
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 11***99 | Valve Group-Pressure Reducing | 1 |
186-0905 Valve Gp-Relief -Line
| 10***48 | Valve Group-Sequence | 1 |
| 18***05 | Valve Group-Relief; -Auxiliary, Line | 1 |
| 1T***36 | Plug; (Pipe) (1/16-27 Thd) | 1 |
186-0901 Valve Gp-Relief
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
9t-4742 Valve Gp-Sequence
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
152-8344 Valve Gp-Solenoid
| 10***44 | Check Valve Group | 1 |
| 10***45 | Valve Group-Diverter; (Secondary Steering) | 1 |
| 10***46 | Relief Valve Group | 1 |
6t-5859 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3G***71 | Cartridge Assem. | 1 |
| 3G***75 | Seal Kit; (Includes Seals And Ring) | 1 |
149-2610 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 14***11 | Cartridge Assem. | 1 |
134-9878 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 13***78 | Valve Group-Solenoid | 1 |
9x-3267 Valve Gp-Solenoid
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***53 | Spacer; (20.8-mm Thk) | 1 |
| 16***57 | Kit-Service | 1 |
6t-8046 Valve Gp-Solenoid
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***53 | Spacer; (20.8-mm Thk) | 1 |
| 16***57 | Kit-Service | 1 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***05 | Coil Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
103-6317 Valve Gp-Unloading
| 10***17 | Valve Group-Unloading | 1 |
| 1V***92 | Bearing-Sleeve | 2 |
| 2D***67 | Fitting-Grease; (Fan Drive) | 2 |
Implements
116-0908 Control Gp-Bucket
| 11***08 | Control Group-Bucket | 1 |
| 1V***92 | Bearing-Sleeve | 2 |
| 2D***67 | Fitting-Grease; (Fan Drive) | 2 |
Lubrication System
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
7w-8798 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
1w-8845 Filter As-Engine Oil
| 1W***45 | Filter As-Engine Oil | 1 |
157-3568 Filter Gp-Engine Oil
| 15***68 | Filter Group-Engine Oil | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 24***64 | Spring; (Yoke) | 1 |
7c-0896 Filter Gp-Engine Oil
| 1R***14 | Filter As-Engine Oil | 1 |
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
157-3566 Filter Gp-Engine Oil
| 11***69 | Connector | 1 |
| 13***57 | Hose As | 1 |
| 13***45 | Hose As | 1 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
9y-0325 Gauge Gp-Oil Level (Dipstick)
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 7C***09 | Tube As-Guide | 1 |
| 9S***50 | Clip 0.82 mm(.032 In.) Thick | 1 |
7c-5873 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***59 | Tube Assem. | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
4w-6615 Lines Gp-Turbocharger Oil
| 11***42 | Adapter | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
7e-2971 Pump Gp-Engine Oil
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 2 |
| 7E***71 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 7E***87 | Pump Group-Engine Oil | 1 |
7e-3687 Pump Gp-Engine Oil
| 2W***78 | Plunger-Relief | 1 |
| 2W***79 | Washer; (8.5x9.5x1.6-mm Thk) | 1 |
| 2W***85 | Gear-Pump Drive (33 Teeth) | 1 |
119-2925 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***25 | Pump Group-Engine Oil | 1 |
| 2W***78 | Plunger-Relief | 1 |
Machine Arrangement
116-0901 Chassis Ar
| 11***04 | Frame Group-Rear | 1 |
| 11***13 | Lines Group-Grease | 1 |
| 11***28 | Control Group-Service Brake | 1 |
116-0900 Common Ar
| 11***07 | Engine Ar | 1 |
| 11***03 | Power Train Ar | 1 |
| 11***04 | Installation Ar-Engine | 1 |
Operator Station
120-5917 Motor Gp-Window Wiper
| 12***17 | Wiper Group-Windshield | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
3t-7066 Wiper Gp-Window
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 1 |
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
| 3T***59 | Bracket | 1 |
118-6289 Motor Gp-Window Wiper
| 11***89 | Wiper Group-Windshield | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
116-0814 Air Conditioner & Mounting Gp
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 11***58 | Lines Group-Air Conditioner | 1 |
| 11***08 | Radiator Group | 1 |
116-0871 Air Conditioner Ar
| 06***93 | Grommet; (Rh) | 1 |
| 10***65 | Heater Group-Cab | 1 |
| 10***70 | Grommet | 1 |
106-7281 Air Conditioner Gp
8y-6000 Armrest Gp -Lh
| 11***50 | Duct & Control Group | 1 |
| 11***63 | Panel Group-Instrument | 1 |
| 11***65 | Panel Group-Instrument | 1 |
8y-4200 Armrest Gp -Rh
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
8y-5904 Armrest Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
116-0842 Cab Ar-Enclosed Rops
| 11***42 | Cab Ar-Enclosed Rops | 1 |
| 11***48 | Dash Group | 1 |
| 11***52 | Liner Group-Open Rops; Headliner Gp-Open Rops | 1 |
116-0846 Canopy Ar-Open Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***46 | Canopy Ar-Open Rops | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
116-0815 Compressor Gp-Refrigerant
| 11***15 | Compressor Group-Refrigerant | 1 |
| 13***97 | Compressor Group-Refrigerant | 1 |
| 2P***91 | V-Belt; (A/C Compressor) | 1 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 2 |
| 7C***41 | Plate | 1 |
| 7E***02 | Bracket | 1 |
134-3997 Compressor Gp-Refrigerant
| 10***29 | Harness Assem. | 1 |
| 13***97 | Compressor Group-Refrigerant | 1 |
| 4E***49 | Boot | 1 |
3e-1906 Compressor Gp-Refrigerant
| 10***47 | Coil Assem. | 1 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
116-0939 Control Gp-Pilot Operated Hyd
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
116-0935 Control Gp-Pilot Operated Hyd
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 1 |
| 11***04 | Housing | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
116-0937 Control Gp-Pilot Operated Hyd
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 1 |
| 11***04 | Housing | 1 |
116-0941 Control Gp-Pilot Operated Hyd
| 10***61 | Lever As-Control Valve | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 1 |
116-0819 Control Gp-Steering
| 10***23 | Bracket | 1 |
| 11***19 | Control Group-Steering | 1 |
| 2T***60 | Button As-Horn; (Transmission Direction) | 1 |
116-0875 Control Gp-Steering
| 10***97 | Control Group-Transmission | 1 |
| 11***75 | Control Group-Steering | 1 |
| 4E***62 | Cover | 1 |
109-3664 Control Gp-Transmission
| 10***64 | Control Group-Transmission | 2 |
| 4E***62 | Cover | 1 |
| 4E***63 | Bracket Assem. | 1 |
9c-8236 Control Gp-Transmission
| 14***20 | Kit-Circuit Board | 1 |
| 6V***73 | Screw; (Machine) (M5x0.8x12mm) | 4 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 9 |
110-2393 Control Gp-Transmission
| 11***93 | Control Group-Transmission | 1 |
| 11***79 | Control Group-Power Train; (Autoshift) | 1 |
| 12***78 | Harness Assembly | 1 |
116-0856 Control Gp-Transmission
| 11***80 | Control Group-Xmsn Electronic; (Autoshift) | 1 |
| 11***56 | Control Group-Transmission | 1 |
| 12***78 | Harness Assembly | 1 |
201-0215 Control Gp-Transmission
| 20***15 | Control Group-Transmission | 1 |
| 4E***04 | Dash-Open Rops | 1 |
| 8T***01 | Bolt-Locking; (M10x1.5x20-mm) | 8 |
136-7822 Control Gp-Transmission
| 13***22 | Control Group-Transmission | 1 |
| 6V***73 | Screw; (Machine) (M5x0.8x12mm) | 4 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 7 |
122-6103 Control Gp-Transmission
| 12***03 | Control Group-Transmission | 1 |
| 6V***73 | Screw; (Machine) (M5x0.8x12mm) | 4 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 7 |
116-0857 Control Gp-Transmission
| 11***57 | Control Group-Transmission | 1 |
| 13***68 | Control Group-Tmsn Electronic | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 4 |
109-3597 Control Gp-Transmission
| 10***97 | Control Group-Transmission | 1 |
| 6V***73 | Screw; (Machine) (M5x0.8x12mm) | 4 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 9 |
116-0848 Dash Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 20 |
| 11***48 | Dash Group | 1 |
| 11***59 | Duct As-Output | 1 |
116-0850 Duct & Control Gp
| 11***50 | Duct & Control Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 11***86 | Track Group | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 4 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
9x-6752 Gauge Gp-Cluster
| 09***37 | Spacer; (12-mm Thk) | 1 |
| 4E***55 | Cover Assem. | 1 |
| 4E***56 | Boss | 2 |
9c-9371 Guard Gp-Vandalism
| 7C***31 | Radiator Group | 1 |
| 9C***77 | Lines Group-Heater; Cab Heater Lines Group | 1 |
| 9C***39 | Heater Group-Cab; Cab Heater Group | 1 |
116-0869 Heater Ar-Cab
| 10***65 | Heater Group-Cab | 1 |
| 11***69 | Heater Ar-Cab | 1 |
| 8T***44 | Bolt-Plt; (M6 X 1.0 X 70) | 3 |
9c-8239 Heater Gp-Cab
| 10***71 | Support Assem. | 1 |
| 10***73 | Clamp Assem. | 1 |
| 10***75 | Plate | 1 |
100-3965 Heater Gp-Cab
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***65 | Heater Group-Cab | 1 |
108-4582 Housing Gp-Seat Suspension
| 10***82 | Housing Group-Seat Suspension | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 9 |
| 4E***91 | Cover-Radio | 1 |
4e-1412 Installation Gp-Radio
| 11***43 | Converter Group-Electrical | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 9 |
| 4E***91 | Cover-Radio | 1 |
8y-8999 Control Gp-Handle
| 10***29 | Harness Assem. | 1 |
| 4E***49 | Boot | 1 |
| 6V***05 | Screw-Machine; (M3x0.5x25-mm) | 2 |
101-7761 Control Gp-Handle
| 10***61 | Lever As-Control Valve | 1 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 1 |
| 11***04 | Housing | 1 |
8y-8504 Liner Gp-Cab
| 11***98 | Floor Mat | 1 |
| 13***31 | Holder-Cup | 1 |
| 4E***74 | Strip | 1 |
116-0873 Liner Gp-Cab
| 11***73 | Liner Group-Cab; Liner Gp-Operator Compartment | 1 |
| 3W***41 | Washer; (16x75x3.5-mm Thk) | 14 |
| 4E***44 | Insulattion | 1 |
116-0860 Liner Gp-Cab
| 10***66 | Cover Assem. | 1 |
| 10***85 | Angle | 2 |
| 11***60 | Liner Group-Cab; Liner Gp-Operator Compartment | 1 |
116-0852 Liner Gp-Open Rops
| 10***18 | Accumulator-Air Conditioner | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***86 | Tube Assem. | 1 |
110-7558 Lines Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***93 | Valve As | 1 |
9c-6377 Lines Gp-Cab Heater
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 9C***77 | Lines Group-Heater; Cab Heater Lines Group | 1 |
6v-1970 Literature Gp
| 23***46 | Nut-Jam; (3/8-16-Thd) | 2 |
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 3 |
| 4E***60 | Bracket | 2 |
116-0892 Mirror Gp-Rear View
| 11***92 | Mirror Group-Rear View; Mirror Gp-Rear View-Outside | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
9c-8243 Mirror Gp-Rear View -Inside
| 14***86 | Tube As | 1 |
| 14***87 | Tube As | 1 |
| 5P***76 | Mirror | 2 |
147-7972 Motor Gp-Window Wiper
| 10***08 | Plate | 2 |
| 14***72 | Motor Group-Window Wiper | 1 |
| 4E***44 | Shroud (L. H.) | 1 |
147-7971 Motor Gp-Window Wiper
| 14***71 | Motor Group-Window Wiper | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
9c-8244 Mounting Gp-Cab
| 11***19 | Control Group-Steering | 1 |
| 11***42 | Cab Ar-Enclosed Rops | 1 |
| 11***60 | Liner Group-Cab; Liner Gp-Operator Compartment | 1 |
4e-4843 Mounting Gp-Cab
| 10***08 | Plate | 2 |
| 4E***43 | Mounting Group-Cab; R.O.P.S. Mounting Group | 1 |
| 6Y***25 | Sleeve-Rops | 4 |
116-0880 Operator Ar-Enclosed Rops
| 11***46 | Canopy Ar-Open Rops | 1 |
| 11***75 | Control Group-Steering | 1 |
| 11***80 | Operator Ar-Enclosed Rops | 1 |
116-0884 Operator Ar-Open Rops
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
| 11***84 | Operator Ar-Open Rops | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
8y-5992 Pan Gp-Seat
| 03***28 | Grommet | 1 |
| 10***61 | Film-Face | 1 |
| 10***88 | Harness Assembly | 1 |
116-0863 Panel Gp-Instrument
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 11***63 | Panel Group-Instrument | 1 |
116-0867 Panel Gp-Instrument
| 11***67 | Panel Group-Instrument | 1 |
| 1B***04 | Key,Woodruff Governor And Decelerator Control | 1 |
| 2V***59 | Bearing (Use As Required) | 4 |
116-0865 Panel Gp-Instrument
| 10***63 | Film-Switch | 1 |
| 11***65 | Panel Group-Instrument | 1 |
| 2F***51 | Lockwasher (6.65mm Id) | 2 |
9c-8248 Pedal Gp-Governor
| 09***13 | Spacer | 1 |
| 10***76 | Insulation | 1 |
| 10***15 | Sheet As | 1 |
6v-6561 Wiper Pivot Gp
| 20***23 | Cap; (Wiper) | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
9c-8249 Rops Gp-Enclosed
| 10***82 | Plate Assem. | 1 |
| 10***83 | Gasket | 1 |
| 3E***05 | Seal (Order By cm) 7cm | 0 |
9c-9963 Rops Gp-Open
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***53 | Bolt-Hex; (7/16-20x1.5in) | 2 |
156-1148 Seat Belt Gp -Retractable
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
8y-3792 Seat Belt Gp -Retractable
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
109-1656 Seat Belt Gp
| 10***56 | Seat Belt Group; -Retractable | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
129-7253 Seat Belt Gp -Retractable
| 12***53 | Seat Belt Group; -Retractable | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
8y-5986 Seat Gp -Cloth, Lumbar
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 4F***79 | Bolt Clip To Tube Assembly (Aftercooler Radiator Inlet) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
107-5827 Seat Gp-Suspension
| 10***27 | Seat Group-Suspension | 1 |
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
108-2191 Seat Gp-Suspension
| 10***91 | Seat Group-Suspension | 1 |
| 11***51 | Upper Assem. Kit; (Included Marked J) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
108-2188 Seat Gp-Suspension
| 10***88 | Seat Group-Suspension | 1 |
| 11***50 | Upper Assem. Kit; (Includes Parts Marked J) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
108-2189 Seat Gp-Suspension
| 10***89 | Seat Group-Suspension | 1 |
| 10***92 | Seat Group-Suspension | 1 |
| 10***56 | Seat Belt Group; -Retractable | 1 |
108-2192 Seat Gp-Suspension -Vinyl
| 10***27 | Seat Group-Suspension | 1 |
| 10***92 | Seat Group-Suspension | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
109-1224 Seat Gp-Suspension
| 10***24 | Seat Group-Suspension | 1 |
| 4E***45 | Button | 10 |
| 4E***21 | Insulation | 1 |
4e-2784 Suppression Gp-Sound
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
108-4082 Suspension Gp-Seat -Contour
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
7x-6010 Valve Gp-Water -Heater Control
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
8r-2824 Washer Gp-Window
| 2V***16 | Clip; (9.52mm Id) | 2 |
| 4E***15 | Bracket Assem. | 1 |
| 4E***16 | Strap Assem. | 1 |
116-0877 Washer Gp-Window
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 1 |
| 11***77 | Washer Group-Window | 1 |
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
116-0890 Wiper Gp-Window
| 10***42 | Wiper Pivot Group; (Front Window) | 2 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 11***53 | Arm As-Window Wiper | 1 |
100-7335 Wiper Gp-Window
| 10***35 | Wiper Group-Window; -Rear | 2 |
| 11***31 | Bolt; (1/4-28x1.875-In) | 1 |
| 11***53 | Arm As-Window Wiper | 1 |
101-0742 Wiper Pivot Gp
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 1U***57 | Adapter-Strap | 6 |
| 3G***58 | Adapter-Strap; (Lh) | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 4E***53 | Counterweight | 2 |
| 6D***37 | Valve Group-Tire | 1 |
| 8C***90 | Bolt; (M24x3.0x150mm) | 6 |
117-5774 Axle Ar-Fixed
| 11***74 | Axle Ar-Fixed | 1 |
| 11***81 | Gear Group-Bevel & Pinion | 1 |
| 11***85 | Housing Group-Oscillating Axle; (Rear) | 1 |
117-5773 Axle Ar-Fixed
| 10***10 | Differential Group | 1 |
| 11***73 | Axle Ar-Fixed | 1 |
| 11***78 | Housing Group-Fixed Axle; (Front) | 1 |
117-5776 Axle Ar-Oscillating
| 11***76 | Axle Ar-Oscillating | 1 |
| 11***81 | Gear Group-Bevel & Pinion | 1 |
| 11***85 | Housing Group-Oscillating Axle; (Rear) | 1 |
117-5775 Axle Ar-Oscillating
| 10***10 | Differential Group | 1 |
| 11***75 | Axle Ar-Oscillating | 1 |
| 11***83 | Gear Group-Bevel & Pinion | 1 |
117-5777 Axle Ar-Oscillating
| 11***27 | Dowel | 3 |
| 11***77 | Axle Ar-Oscillating | 1 |
| 12***24 | Disc-Friction | 1 |
9c-8162 Brake & Planetary Gp
| 00***69 | Cup-Roller Bearing | 2 |
| 10***70 | Cover Assem. | 1 |
| 10***80 | Shield Assem. | 1 |
113-9515 Case & Parts Gp-Planetary
| 00***69 | Cup-Roller Bearing | 2 |
| 10***70 | Cover Assem. | 1 |
| 10***80 | Shield Assem. | 1 |
102-7568 Case & Parts Gp-Planetary
| 00***69 | Cup-Roller Bearing | 2 |
| 10***70 | Cover Assem. | 1 |
| 10***80 | Shield Assem. | 1 |
102-7548 Clutch Gp -Reverse, Second
| 10***48 | Clutch Group; (Reverse And No.2) | 1 |
| 10***27 | Hub Assem. | 1 |
| 10***30 | Hub Assem. | 1 |
113-9519 Clutch Gp -First, Third
| 10***27 | Hub Assem. | 1 |
| 10***30 | Hub Assem. | 1 |
| 11***19 | Clutch Group; -First, Third | 1 |
114-0350 Clutch Gp
| 11***50 | Clutch Group | 1 |
| 1T***38 | Washer | 17 |
| 6V***23 | Bolt (M8x1.25x100mm); (M8x1.25x100-mm) | 4 |
114-0349 Clutch Gp
| 10***28 | Hub Assem. | 1 |
| 11***49 | Clutch Group | 1 |
| 11***39 | Gear; (74-Teeth) | 1 |
114-0348 Clutch Gp
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***48 | Clutch Group | 1 |
113-9518 Clutch Gp -Reverse, Second
| 10***28 | Hub Assem. | 1 |
| 11***18 | Clutch Group; -Reverse, Second | 1 |
| 11***71 | Piston | 1 |
102-7538 Clutch Gp
| 10***38 | Clutch Group; (Forward Low And Forward High) | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***71 | Piston | 1 |
102-7540 Clutch Gp -First, Third
| 10***40 | Clutch Group; (No.1 And No.3) | 1 |
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
113-9516 Clutch Gp
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***16 | Clutch Group | 1 |
8e-7583 Control Gp-Transmission Hyd
| 10***20 | Cover As-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 10 |
133-1357 Cover Gp-Front
| 13***57 | Cover Group-Front | 1 |
| 13***05 | Washer-Thrust | 2 |
| 6K***14 | Dowel | 1 |
4e-0885 Differential Gp-Limited Slip
| 10***47 | Gear-Differential Bevel; (16-Teeth) | 2 |
| 10***49 | Pinion-Differential Bevel; (9-Teeth) | 4 |
| 10***50 | Shaft-Pinion | 2 |
9c-8161 Differential Gp
| 13***05 | Washer-Thrust | 2 |
| 6K***14 | Dowel | 1 |
| 7V***17 | Shaft-Governor Control | 1 |
103-2010 Differential Gp-Limited Slip
| 10***10 | Differential Group | 1 |
| 4E***67 | Spacer; (9.5x46.4x34.0-mm Thk) | 1 |
| 6S***71 | Retainer | 2 |
143-9513 Differential Gp
| 14***13 | Differential Group | 1 |
| 4E***00 | Ring-Pressure | 2 |
| 4E***01 | Pinion-Differential; (9 Teeth) | 4 |
117-5786 Differential Gp-Nospin
| 11***86 | Differential Group-Nospin | 1 |
| 4J***23 | Packing,Preformed Cover And Valve Body | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
8r-8506 Differential Gp-Nospin
| 3H***54 | Washer-Hard; (13.5x22.5x3.0-mm Thk)(Hard) | 8 |
| 6V***96 | Bolt; (M12x1.75x80-mm) | 8 |
| 8R***03 | Case As | 1 |
9c-9204 Filler Gp-Power Train Oil
| 10***91 | Hose Assem. | 1 |
| 11***59 | Hose Assem. | 1 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 2 |
9c-9203 Filter & Lines Gp-Transmission
| 11***59 | Hose Assem. | 1 |
| 12***56 | Filter Group-Oil | 1 |
| 13***28 | Hose Assem. | 1 |
122-6456 Filter Gp-Oil -Power Train
| 10***90 | Spacer | 1 |
| 10***91 | Shaft-Bevel Pinion | 1 |
| 10***93 | Yoke As | 1 |
8e-9623 Filter Gp-Oil -Power Train
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
105-2092 Gear Gp-Bevel & Pinion
| 10***90 | Spacer | 1 |
| 10***91 | Shaft-Bevel Pinion | 1 |
| 10***92 | Gear Group-Bevel | 1 |
117-5779 Gear Gp-Bevel & Pinion
| 10***24 | Yoke As | 1 |
| 11***79 | Gear Group-Bevel & Pinion | 1 |
| 4E***96 | Bolt; (M6x1x14-mm)(M6x1x14 mm) | 2 |
117-5783 Gear Gp-Bevel & Pinion
| 00***71 | Cone-Bearing | 2 |
| 11***95 | Shaft-Input | 1 |
| 11***83 | Gear Group-Bevel & Pinion | 1 |
117-5781 Gear Gp-Bevel & Pinion
| 10***24 | Yoke As | 1 |
| 11***81 | Gear Group-Bevel & Pinion | 1 |
| 4E***84 | Gear-Bevel (42 Teeth) | 1 |
102-7557 Gear Gp-Input Transfer
| 00***71 | Cone-Bearing | 2 |
| 10***57 | Gear Group-Input | 1 |
| 11***95 | Shaft-Input | 1 |
113-9514 Gear Gp-Input Transfer
| 10***75 | Yoke-Output | 1 |
| 10***76 | Yoke-Brake Flange | 1 |
| 11***14 | Gear Group-Input Transfer | 1 |
9u-9554 Gear Gp-Output Transfer
| 06***12 | Ring-Retaining | 2 |
| 11***20 | Housing-Axle Shaft | 2 |
| 13***94 | Seal-Lip Type | 1 |
117-5778 Housing Gp-Fixed Axle
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 10***52 | Trunnion | 1 |
117-5785 Housing Gp-Oscillating Axle
| 11***85 | Housing Group-Oscillating Axle; (Rear) | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
9c-7157 Lines Gp-Torque Conv Cooler
| 6K***87 | Dowel | 2 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 24 |
| 7X***88 | Bolt; (M20x2.5x160-mm) | 8 |
117-5771 Mounting Gp-Axle
| 11***71 | Mounting Group-Axle | 1 |
| 6V***37 | Plain Washer - Hardened | 16 |
| 8T***80 | Bolt; (M24x3x60-mm) | 16 |
146-6685 Mounting Gp-Rim
| 14***85 | Mounting Group-Rim | 1 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 16 |
| 8T***79 | Bolt-Plt; (M24 X 3.0 X 50) | 16 |
140-8840 Mounting Gp-Rim
| 14***40 | Mounting Group-Rim | 1 |
| 6V***37 | Plain Washer - Hardened | 16 |
| 6V***99 | Bolt; (M24x3.0x50mm) | 16 |
118-8595 Mounting Gp-Rim -Axle Oscillation Limitation
| 11***95 | Mounting Group-Rim; -Axle Oscillation Limitation | 1 |
| 14***39 | Block | 2 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 64 |
117-7838 Mounting Gp-Rim
| 11***38 | Mounting Group-Rim | 1 |
| 4E***57 | Block; (Oscillation Limiter) | 2 |
| 6V***37 | Plain Washer - Hardened | 64 |
147-5071 Mounting Gp-Rim
| 11***72 | Shaft Group-Drive | 1 |
| 13***66 | Shaft Group-Drive | 1 |
| 14***71 | Mounting Group-Rim | 1 |
116-0803 Power Train Ar
| 11***03 | Power Train Ar | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
6y-6711 Pump Gp-Gear
| 3T***94 | Bearing-Sleeve | 4 |
| 5H***52 | Seal 5.73 In. (14.55 cm)Inside Dia. | 1 |
| 5M***87 | Dowel (Part Of 1p***81 Assem.) | 2 |
6y-6712 Pump Gp-Transmission -1-Section Gear
| 11***38 | Mounting Group-Rim | 1 |
| 14***40 | Mounting Group-Rim | 1 |
| 2Q***79 | Rim Group-Demountable | 4 |
146-6783 Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 2Q***80 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***79 | Seal-O-Ring | 1 |
117-7836 Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***38 | Mounting Group-Rim | 1 |
| 11***40 | Rim Group-Demountable; -3-Piece | 4 |
118-8596 Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 14***71 | Mounting Group-Rim | 1 |
| 2Q***79 | Rim Group-Demountable | 4 |
2q-5978 Rim Ar
| 11***39 | Rim Group-Demountable; -1-Piece | 4 |
| 14***85 | Mounting Group-Rim | 1 |
| 14***71 | Mounting Group-Rim | 1 |
117-7837 Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***95 | Mounting Group-Rim; -Axle Oscillation Limitation | 1 |
| 11***41 | Rim Group-Demountable; -3-Piece | 4 |
117-7840 Rim Gp-Demountable
| 11***40 | Rim Group-Demountable; -3-Piece | 1 |
| 12***84 | Rim Group-Demountable; -3-Piece, Hose | 1 |
| 2D***28 | Core-Valve | 1 |
186-4943 Rim Gp-Demountable
| 10***27 | Universal Joint Group | 1 |
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
117-7839 Rim Gp-Demountable
| 10***31 | Rim As | 1 |
| 11***39 | Rim Group-Demountable; -1-Piece | 1 |
| 2D***28 | Core-Valve | 1 |
128-5436 Rim Gp-Demountable
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
| 8R***23 | Rim As | 1 |
119-5841 Rim Gp-Demountable
| 10***31 | Rim As | 1 |
| 11***41 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
176-1705 Rim Gp-Demountable
| 17***89 | Flange As | 1 |
| 17***18 | Driver | 1 |
| 17***05 | Rim Group-Demountable; -3-Piece | 1 |
2q-5980 Rim Gp-Demountable
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
129-1884 Rim Gp-Demountable
| 12***84 | Rim Group-Demountable; -3-Piece, Hose | 1 |
| 17***98 | Flange As | 1 |
| 17***99 | Rim As | 1 |
2q-5979 Rim Gp-Demountable
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
| 2Q***79 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
186-4942 Rim Gp-Demountable
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
176-1706 Rim Gp-Demountable
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 17***05 | Rim Group-Demountable; -3-Piece | 1 |
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
138-1666 Shaft Gp-Drive
| 11***40 | Kit-Spider & Bearing | 1 |
| 13***66 | Shaft Group-Drive | 1 |
| 13***77 | Universal Joint Group | 1 |
105-2126 Shaft Gp-Drive
| 10***25 | Slip Joint Group | 1 |
| 10***26 | Shaft Group-Drive | 2 |
| 4E***84 | Strap | 10 |
117-5772 Shaft Gp-Drive
| 11***39 | Kit-Spider & Bearing | 1 |
| 11***72 | Shaft Group-Drive | 1 |
| 13***67 | Universal Joint Group | 1 |
138-1678 Shaft Gp-Drive
| 0S***70 | Cap Screw (5/8" Long) | 4 |
| 13***78 | Shaft Group-Drive | 1 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
138-1676 Slip Joint Gp
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***36 | Rim Ar; -1-Piece | 1 |
| 13***76 | Slip Joint Group | 1 |
105-2125 Slip Joint Gp
| 10***25 | Slip Joint Group | 1 |
| 11***40 | Kit-Spider & Bearing | 2 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
128-5446 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***46 | Tire & Rim Ar | 1 |
| 14***86 | Tire; (17.5-25) | 4 |
130-8426 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 13***26 | Tire & Rim Ar | 1 |
| 14***87 | Tire; (17.5-25) | 4 |
136-2679 Tire & Rim Ar
| 13***79 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
| 6C***47 | Tire; (20.5 R25*L-3) | 4 |
136-2685 Tire & Rim Ar
| 12***63 | Tire; (20.5-25) | 4 |
| 13***85 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
136-2686 Tire & Rim Ar
| 13***86 | Tire & Rim Ar | 1 |
| 14***83 | Rim Ar; -3-Piece | 1 |
| 20***09 | Tire; (550/65-R25) | 4 |
117-7861 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***61 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
130-8425 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 13***25 | Tire & Rim Ar | 1 |
| 14***84 | Tire; (17.5-25) | 4 |
128-5438 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***38 | Tire & Rim Ar | 1 |
| 12***51 | Tire; (17.5-25) | 4 |
128-5439 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***39 | Tire & Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
136-2683 Tire & Rim Ar
| 12***62 | Tire; (20.5-25) | 4 |
| 13***83 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
117-7851 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***51 | Tire & Rim Ar | 1 |
130-8427 Tire & Rim Ar
| 10***37 | Tire; (20.5 R25*L-2) | 4 |
| 13***27 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
136-2680 Tire & Rim Ar
| 13***80 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
| 6C***67 | Tire; (20.5-R25) | 4 |
136-2682 Tire & Rim Ar
| 12***67 | Tire; (20.5-25) | 4 |
| 13***82 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
136-2681 Tire & Rim Ar
| 12***64 | Tire-Tubeless; (20.5-25) | 4 |
| 13***81 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
117-7862 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***62 | Tire & Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
128-5447 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***47 | Tire & Rim Ar | 1 |
| 14***84 | Tire; (17.5-25) | 4 |
136-2684 Tire & Rim Ar
| 12***65 | Tire; (20.5x25)(20.5 X 25-12 Ply) | 4 |
| 13***84 | Tire & Rim Ar | 1 |
| 2Q***78 | Rim Ar | 1 |
130-8424 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 13***24 | Tire & Rim Ar | 1 |
| 14***87 | Tire; (17.5-25) | 4 |
128-5441 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***64 | Tire-Tubeless; (20.5-25) | 4 |
| 12***41 | Tire & Rim Ar | 1 |
117-7849 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***49 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
128-5440 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***40 | Tire & Rim Ar | 1 |
| 12***51 | Tire; (17.5-25) | 4 |
117-7860 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***60 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
117-7848 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***48 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
149-8058 Tire & Rim Ar
| 14***58 | Tire & Rim Ar | 1 |
| 1S***11 | Ring-Retaining | 1 |
| 1T***92 | Plate-Clamp | 2 |
128-5442 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***42 | Tire & Rim Ar | 1 |
| 14***83 | Tire; (17.5-25) | 4 |
128-5444 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***44 | Tire & Rim Ar | 1 |
| 14***86 | Tire; (17.5-25) | 4 |
128-5445 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***45 | Tire & Rim Ar | 1 |
| 14***83 | Tire; (17.5-25) | 4 |
1t-1936 Torque Converter Gp
| 10***38 | Clutch Group; (Forward Low And Forward High) | 1 |
| 10***40 | Clutch Group; (No.1 And No.3) | 1 |
| 10***48 | Clutch Group; (Reverse And No.2) | 1 |
1t-1935 Torque Converter Gp
| 1S***11 | Ring-Retaining | 1 |
| 1T***92 | Plate-Clamp | 2 |
| 1T***05 | Ring-Snap | 1 |
103-5858 Transmission Ar-Power Shift
| 10***58 | Transmission Ar-Power Shift | 1 |
| 11***14 | Gear Group-Input Transfer | 1 |
| 11***15 | Case & Parts Group-Planetary | 1 |
113-9513 Transmission Ar-Power Shift
| 10***02 | Transmission Ar-Power Shift | 1 |
| 11***13 | Transmission Ar-Power Shift; -Powershift | 1 |
| 9C***36 | Control Group-Transmission | 1 |
116-0858 Transmission Ar-Power Shift
| 10***58 | Transmission Ar-Power Shift | 1 |
| 11***93 | Control Group-Transmission | 1 |
| 11***13 | Transmission Ar-Power Shift; -Powershift | 1 |
116-0806 Transmission Ar-Power Shift
| 10***58 | Transmission Ar-Power Shift | 1 |
| 11***13 | Transmission Ar-Power Shift; -Powershift | 1 |
| 11***06 | Transmission Ar-Power Shift | 1 |
116-0862 Transmission Ar-Power Shift
| 0S***70 | Cap Screw (5/8" Long) | 4 |
| 11***62 | Transmission Ar-Power Shift | 1 |
| 5B***35 | Fitting-Grease; (Straight) | 1 |
116-0859 Transmission Ar-Power Shift
| 10***02 | Transmission Ar-Power Shift | 1 |
| 11***93 | Control Group-Transmission | 1 |
| 11***54 | Wiring Group-Transmission Control | 1 |
102-7502 Transmission Ar-Power Shift
| 10***02 | Transmission Ar-Power Shift | 1 |
| 11***14 | Gear Group-Input Transfer | 1 |
| 11***15 | Case & Parts Group-Planetary | 1 |
105-2127 Universal Joint Gp
| 10***27 | Universal Joint Group | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
8e-7582 Valve Gp-Selector & Press Cont
| 0L***13 | Nut-Special; (1/2unf) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3E***67 | Cartridge Assem. | 1 |
8e-5523 Valve Gp-Dump -Transmission
| 2L***26 | Ring-Retaining | 1 |
| 4M***45 | Spring (.0625" Dia.) | 1 |
| 6I***95 | Screen | 1 |
142-2882 Valve Gp-Flow Control
| 14***82 | Valve Group-Flow Control | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
9w-7189 Valve Gp-Flow Control -Planetary Case
| 2L***26 | Ring-Retaining | 1 |
| 4M***45 | Spring (.0625" Dia.) | 1 |
| 6I***95 | Screen | 1 |
2t-2951 Valve Gp-Fluid Sampling
| 2L***26 | Ring-Retaining | 1 |
| 2S***82 | Spring | 1 |
| 2T***51 | Valve Group-Fluid Sampling; Manual Valve Group (Fluid Sampling) | 1 |
125-7922 Valve Gp-Relief
| 12***22 | Valve Group-Relief | 1 |
| 1P***20 | Ring-Retaining | 1 |
| 2L***94 | Pin-Spring; .24cm(.094 In Dia) | 1 |
6i-9806 Valve Gp-Relief -Torque Converter Outlet
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
119-4122 Valve Gp-Relief
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***43 | Seal-O-Ring | 2 |
| 11***22 | Valve Group-Relief | 1 |
8e-7580 Valve Gp-Selector & Press Cont
| 14***67 | Poppet | 1 |
| 1T***38 | Washer | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 5 |
3e-6269 Valve Gp-Solenoid
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Hydraulic Tank
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
118-2445 Plate & Film Gp
| 10***74 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***38 | Plate-Warning | 0 |
| 11***45 | Plate & Film Group | 1 |
118-2447 Plate & Film Gp
| 10***76 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***40 | Plate-Warning | 1 |
| 10***44 | Plate-Instruction | 1 |
118-2449 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 10***18 | Plate-Warning; (No Clearance) | 2 |
114-4174 Plate & Film Gp
| 11***74 | Plate & Film Group | 1 |
118-2440 Plate & Film Gp
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***33 | Plate-Warning | 1 |
| 11***40 | Plate & Film Group | 1 |
114-4159 Plate & Film Gp
| 10***71 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 10***77 | Plate-Warning | 1 |
114-4161 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 1 |
114-4157 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
118-2442 Plate & Film Gp
| 10***71 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***35 | Plate-Warning | 1 |
| 11***42 | Plate & Film Group | 1 |
118-2448 Plate & Film Gp
| 10***69 | Plate-Warning; (Read Omm) | 1 |
| 10***76 | Plate-Warning; (No Clearance) | 2 |
| 10***83 | Film-Instruction | 1 |
114-4158 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***70 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 1 |
118-2441 Plate & Film Gp
| 10***70 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***34 | Plate-Warning | 1 |
| 11***41 | Plate & Film Group | 1 |
114-4164 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***76 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 1 |
118-2443 Plate & Film Gp
| 10***72 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***36 | Plate-Warning | 1 |
| 11***43 | Plate & Film Group | 1 |
114-4163 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***75 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
118-2439 Plate & Film Gp
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***32 | Plate-Warning | 1 |
| 11***39 | Plate & Film Group | 1 |
114-4165 Plate & Film Gp
| 10***93 | Plate-Warning-On Headliner Above Radio | 1 |
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
159-5298 Plate & Film Gp
| 15***98 | Plate & Film Group | 1 |
114-4160 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***72 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 1 |
118-2444 Plate & Film Gp
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***37 | Plate-Warning | 1 |
| 11***44 | Plate & Film Group | 1 |
118-2446 Plate & Film Gp
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***39 | Plate-Warning | 1 |
| 11***46 | Plate & Film Group | 1 |
114-4162 Plate & Film Gp
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 1 |
| 10***74 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
115-5852 Plate & Film Gp -Engine Information
| 10***29 | Plate-Warning-On Control Lever Housing | 1 |
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 12***06 | Film-Warning; (Next To Radiator Fill Cap) | 1 |
6w-0057 Box Gp-Tool
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
Steering System
9c-3790 Cylinder & Mtg Gp-Steering
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 16***50 | Seal-Wiper | 1 |
9t-2637 Cylinder Gp-Steering
| 0L***72 | Clip (Use With Marine Engine) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***17 | Valve Group-Unloading | 1 |
116-0821 Lines Gp-Secondary Steering
| 0L***72 | Clip (Use With Marine Engine) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***17 | Valve Group-Unloading | 1 |
116-0820 Lines Gp-Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Hose Assem. | 1 |
| 11***20 | Lines Group-Steering | 1 |
116-0824 Pump & Mtg Gp-Secondary Steer
| 11***24 | Pump & Mtg Group-Secondary Steer | 1 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 2 |
| 1L***68 | Ring-Retaining | 1 |
9t-9803 Pump Gp-Gear
| 11***60 | Kit-Seal; (Hmu Steering) | 1 |
| 11***24 | Kit-Conversion | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
136-2185 Pump Gp-Metering
| 00***55 | Ring-Retaining | 1 |
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***28 | Seal-O-Ring | 1 |
9t-5530 Pump Gp-Metering
| 10***76 | Kit-Spring | 1 |
| 10***04 | Seal | 1 |
| 11***80 | Cap | 1 |
119-8741 Pump Gp-Metering
| 10***76 | Kit-Spring | 1 |
| 10***04 | Seal | 1 |
| 11***80 | Cap | 1 |
105-2152 Pump Gp-Piston -Steering
| 00***55 | Ring-Retaining | 1 |
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***28 | Seal-O-Ring | 1 |
130-6225 Pump Gp-Piston -Steering
| 00***83 | Ring-Snap | 1 |
| 13***25 | Pump Group-Piston; -Steering | 1 |
| 9T***57 | Pin | 3 |
9t-2031 Rotating Gp-Pump
| 11***21 | Lines Group-Secondary Steering | 1 |
| 11***24 | Pump & Mtg Group-Secondary Steer | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
116-0823 Steering Ar-Secondary
| 03***01 | Knob, Part Of Valve Assembly.,. Pipe | 1 |
| 11***23 | Steering Ar-Secondary | 1 |
| 13***11 | Kit-Horn Contact | 1 |
8y-7680 Steering Column Gp
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 2S***00 | Dowel | 1 |
| 3E***54 | Ball | 1 |
6e-6514 Valve Gp-Pump Control -Steering
| 13***22 | Spring-Margin | 1 |
| 19***63 | Body-Valve | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
130-6224 Valve Gp-Pump Control -Steering
| 06***57 | Seal-O-Ring | 1 |
| 11***11 | Seal Assem.; (Includes Parts Marked J) | 4 |
| 13***24 | Valve Group-Pump Control; (Pressure, Flow Compensator) | 1 |
Work Tools
9v-8959 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 1U***54 | Adapter (Center) | 8 |
| 4V***85 | Corner-Rh; (R.H.) | 1 |
9v-8957 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 4V***44 | Corner-Rh; (R.H.) | 1 |
| 4V***45 | Corner-Lh; (R.H.) | 1 |
4e-2473 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 4E***59 | Edge-Cutting; (243-cm) | 1 |
| 4E***73 | Bucket As-General Purpose; Bucket As-General Purpose | 1 |
4e-2474 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 4E***74 | Bucket As-General Purpose | 1 |
| 4V***44 | Corner-Rh; (R.H.) | 1 |
132-2257 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 13***57 | Bucket As-General Purpose | 1 |
| 4E***59 | Edge-Cutting; (243-cm) | 1 |
9v-8961 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 6K***76 | Bearing-Sleeve | 1 |
| 8P***70 | Plate | 2 |
9v-8954 Bucket As-General Purpose
| 10***13 | Plate As | 2 |
| 1U***54 | Adapter (Center) | 8 |
| 4V***85 | Corner-Rh; (R.H.) | 1 |
9w-1381 Adapter Gp-Tip
| 1K***70 | Nut (National Coarse) | 1 |
| 5G***73 | Pin | 2 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 2 |
9v-1795 Arm Gp-Material Handling
| 13***56 | Bucket Group-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
| 9V***95 | Arm Group-Material Handling | 1 |
3g-4428 Edge Gp-Bit & Cutting
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 12 |
| 3G***28 | Bit & Cutting Edge Group | 1 |
| 4F***27 | Bolt-Plow; (3/4-10x57.15mm) | 12 |
231-1501 Bucket Ar-General Purpose
| 10***13 | Plate As | 2 |
| 1U***54 | Adapter (Center) | 8 |
| 23***01 | Bucket Ar-General Purpose | 1 |
132-2256 Bucket Gp-General Purpose
| 13***56 | Bucket Group-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***09 | Plate-Instruction | 1 |
6w-8832 Carriage As-Fork -Quick Coupler
| 11***10 | Lines Group-Coupler | 1 |
| 11***04 | Coupler Group-Quick | 1 |
| 6W***32 | Carriage As-Fork; -Quick Coupler | 1 |
116-0907 Coupler Ar-Quick
| 10***87 | Plate | 2 |
| 11***43 | Coupler As | 1 |
| 11***07 | Coupler Ar-Quick | 1 |
116-0903 Coupler Ar-Quick
| 11***03 | Coupler Ar-Quick | 1 |
| 11***04 | Coupler Group-Quick | 1 |
| 11***60 | Lines Group-Coupler; -Quick | 1 |
116-0904 Coupler Gp-Quick
| 10***87 | Plate | 2 |
| 11***04 | Coupler Group-Quick | 1 |
| 12***44 | Shim; (3.175-mm Thk)(M53x90x3.2mm Thk) | 2 |
132-1053 Edge Gp-Cutting
| 13***35 | Edge-Segment | 5 |
| 13***37 | Edge-Segment | 2 |
| 13***53 | Edge Group-Cutting | 1 |
7t-9324 Edge Gp-Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 10 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
| 4T***91 | End Bit; (End) | 2 |
8e-4566 Edge Gp-Cutting
| 13***35 | Edge-Segment | 5 |
| 13***36 | Edge-Segment | 2 |
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
132-1054 Edge Gp-Cutting
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 13***54 | Edge Group-Cutting | 1 |
6w-8900 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***00 | Fork Group | 1 |
6w-8933 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***33 | Fork Group | 1 |
6w-9739 Fork Gp-Pallet
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***52 | Tip (Long) | 1 |
9w-8142 Tip Gp-Long
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***51 | Tip (Short) | 1 |
9j-3169 Tip Gp-Long
| 9J***69 | Tip Group-Long; -J-250 | 9 |
9w-8143 Tip Gp-Short
| 4L***58 | Nut,Plain,Hexagon Governor Control | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 2 |
| 5P***83 | Seal .32 M (Order By The Meter) | 0 |
9j-3178 Tip Gp-Short
| 9J***78 | Tip Group-Short; -J-250 | 9 |
IT24F serial number reference
The PIN plate on the IT24F is a riveted metal tag on the front frame, left side near the operator's station, consistent with wheel-loader-type placement for this era. The prefix is the first three characters of the serial number stamped on that plate; it identifies the production block, and the digits that follow are the sequential unit number within that block.
| Prefix | Identifies | Notes |
|---|---|---|
| 4NN | IT24F integrated toolcarrier, standard production block | Cat 3114 turbocharged diesel, 78 kW (105 hp). Covers the bulk of documented parts and service literature; real-world units observed from roughly 00490 through 01476 in this prefix, spanning mid-1990s through 1999 production. |
| 6KN | IT24F integrated toolcarrier, parallel production block | Same base machine and Cat 3114 turbocharged diesel as the 4NN block. Factory operation & maintenance and hydraulic-system manuals list 6KN and 4NN together as one coverage set, and the intake-grid-heater cold-start option applied to both prefixes. No functional or configuration difference from 4NN is documented; confirm any perceived difference with a dealer. |
Frequently asked questions
What engine does the Caterpillar IT24F use?
A Caterpillar 3114T: a mechanically governed, turbocharged 4.4-liter inline-4 diesel rated around 78.3 kW (105 hp) net. It predates electronic engine controls, so there's no engine ECM or stored fault codes to pull.
What is the operating weight of the IT24F?
Approximately 9,990-10,100 kg (22,020-22,270 lb), depending on bucket or fork configuration and source. Treat any single published figure as an approximation and check the machine's own spec plate for its exact build.
What replaced the Caterpillar IT24F?
There's no single, clearly documented model named as the IT24F's direct replacement. It belongs to Cat's broader IT-series integrated-toolcarrier lineup, built on the same small-wheel-loader platform family, which continued to evolve into later generations. Confirm the closest current equivalent with a Cat dealer rather than assume a specific successor model number.
What IT24F owners discuss
How reliable is the 3114T engine in the IT24F, and what's the biggest engine complaint?
Reports split into two camps. Some owners run the 3114T well past 10,000-11,000 hours with no major work, calling it rock solid. Others report a cracked cylinder liner (sleeve) breaking into the water jacket well before that, letting coolant migrate into the oil - shows up as milky/dark oil, noticeable coolant loss (a couple gallons at a time), and eventually bearing damage if run that way. Blue-to-white exhaust smoke at high hours (worn injectors, tired rings) is also reported, along with occasional fuel-in-oil from a failed injector sleeve tube seal. The dividing line in most accounts is cooling-system upkeep - machines with clean coolant history and no cross-contamination tend to be the long runners. Before buying or after any coolant loss, pull the dipstick and check for a milky sheen or coolant smell, and pressure-test the cooling system.
What transmission symptoms come up most, and what's usually behind them?
The common pattern is progressive gear loss - 2nd gear forward drops out first, then 2nd reverse, then the transmission loses gears entirely. On teardown this often traces to dirt and debris in the pickup screen and control valve body, contaminated oil, and worn or non-responsive shift solenoids. A neutralizer switch fault can also cut power to the solenoids and mimic a bigger failure. Fault codes referencing an invalid harness signal or a downshift/auto-manual switch signal fault show up on this platform and point to wiring/connector issues before the valve body itself. Some owners have replaced the transmission pump only to find pressures still below spec, meaning the wear was in the control valve, not the pump. Loss of forward/reverse control on a loaded machine is a safety issue - have your dealer verify solenoid and pressure readings against spec before returning it to service.
Why is the IT24F known for being hard to start in cold weather, and what actually fixes it?
Factory-optioned intake/air heaters were only fitted to machines carrying the 4NN or 6KN serial prefix; if a specific unit doesn't have one, it likely wasn't built with the option, though the wiring for a retrofit is generally already present in the harness. Beyond that, owners report an engine block heater (roughly 1500 watt) gets a cold engine turning over and starting within about ten minutes in freezing weather. Other consensus items: fresh winter-blend fuel, healthy batteries, and clean/tight connections at the starter and start solenoid - all reduce hard-starting complaints as much as the heater itself. Starting fluid should only be used the way the OEM cold-start procedure specifies for a machine with an intake heater - mixing the two incorrectly is a fire/intake-damage risk. Have your dealer verify the correct cold-start method for your serial prefix before relying on ether.
What electrical or sensor problems come up repeatedly on this machine?
Starter failures are the most repeated complaint, including cases of a replacement starter failing again within a couple of years. The root cause reported more often than a bad starter itself is a corroded or damaged ring terminal at the ground or power cable, or undersized cabling - not the starter motor. Consensus advice is to inspect and clean the battery-to-starter and ground cable connections and confirm cable gauge against the machine's own electrical schematic before condemning another starter. On the sensor side, fault codes for engine speed sensor and transmission speed sensor signal faults, plus auto/manual and downshift switch signal faults, are reported on this control system - these point to connector or harness issues first, not necessarily the sensor itself.
What hydraulic or steering leaks are typical for a machine this age?
Two leak points come up repeatedly: a steering shaft seal weeping at the column/orbital metering pump, and tilt cylinder rod seal leaks. Both are treated as routine seal jobs at this hour range rather than signs of a bigger problem. The steering repair requires a specific depressurization sequence first - set the parking brake, connect the steering frame lock link, shut the engine down, cycle the control levers through full travel to bleed residual pressure, then slowly crack the hydraulic tank breather cap before opening any line. Skipping that sequence on an articulated machine's steering circuit is a safety risk - have your dealer verify the system is fully de-pressurized before any line or seal is disturbed.
What wear patterns show up on the linkage, quick coupler, and tires?
The eight-bar parallel-lift linkage and integrated quick coupler pins/bushings wear down steadily with use, and regular greasing slows but doesn't stop it - some play at the boom, tilt, and coupler pins is normal and expected on a higher-hour machine, and is handled with a routine bushing/pin replacement rather than a structural repair. Tire wear is uneven front-to-rear on this configuration: because the toolcarrier does most of its digging and short-cycle loading off the front tires, they wear noticeably faster than the rears - used listings commonly show front tires at a fraction of the tread life remaining on the rears. 17.5-25 is the tire size seen on these machines most often, though size can vary by how a given unit was equipped.
What should I check when looking at a used IT24F?
Confirm the serial prefix (4NN or 6KN) so you know whether it was built with the factory intake heater and to keep parts references correct for that build. Pull the dipstick and check oil for a milky look or coolant smell (early sign of a liner/sleeve problem), and check exhaust color under load for blue/white smoke. Check transmission fluid color and smell, and run the machine through every forward/reverse gear under some load to feel for hesitation or slipping. Walk the linkage and quick coupler pins for play, check tilt cylinder and steering shaft/column for seepage, and compare front-to-rear tire wear - heavy front wear relative to the rear is normal but should still factor into price. Check battery condition and the cable ends at the starter and ground for corrosion, since repeat starter failures on this model are often a cabling issue, not the starter. Have your dealer run a full hydraulic and powertrain function check, along with a coolant/cooling-system pressure test, before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific IT24F part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.