Caterpillartrack-type tractor
Caterpillar D9T
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar D9T is a large track-type tractor (crawler dozer) in Cat's D8-D11 heavy-dozer class, built for mass excavation, mining overburden removal, and heavy ripping. Introduced in 2004 as the replacement for the D9R (itself a 1995 replacement for the D9N), the D9T stayed in production for roughly a decade and a half before Caterpillar retired the nameplate. Power comes from a Cat C18 ACERT diesel: early production carried a Tier 3 rating of 410 net hp (306 kW) at 1800 rpm with 464 hp (346 kW) gross, while an update around 2019 moved to a Tier 4 Final C18 ACERT rated 436 net hp (325 kW) at 1800 rpm. Operating weight runs roughly 47.9 to 49 tonnes (105,600-108,000 lb) depending on blade, ripper, and undercarriage fitment. Standard configuration pairs a semi-universal or straight blade with a single- or multi-shank ripper, riding on an elevated-sprocket undercarriage with a planetary powershift transmission offering three speeds forward and three reverse.
The biggest running change inside the D9T's own life cycle is the roughly 2019 engine and cooling update: the later Tier 4 Final C18 ACERT added an aluminum bar-plate radiator, a revised air-to-air aftercooler, and an electronic productivity control system with auto-shift and a color touchscreen display, on top of the original Tier 3 machine's simpler drivetrain. Buyers and parts counters need to split cooling, emissions, and control-system parts by that break rather than treat every D9T serial number as one spec. Caterpillar ended D9T production around 2020, replacing it with a next-generation Cat D9 that uses a Duralink undercarriage and a stator-clutch torque converter. That switch pushed a large installed base of D9T units into the used and rebuild market, where the model remains a mainstay for mining and large-scale earthmoving fleets that value its simpler powershift drivetrain and elevated-sprocket undercarriage over the newer machine's added electronics.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar D9T specifications
Engine
| Engine model | Cat C18 ACERT — the only engine family fitted to this model across its production life; no other engine model was used on the D9T. |
| Emissions tier (earlier series) | Tier 2/Stage II equivalent and Tier 3/Stage IIIA equivalent (regional calibration, same base rating). |
| Emissions tier (later series) | U.S. EPA Tier 4 Final / EU Stage IV, using a NOx reduction system, diesel particulate filter, and selective catalytic reduction fed by Diesel Exhaust Fluid meeting ISO 22241; ultra-low-sulfur diesel and low-ash oil required. |
| Bore x stroke | 145 mm x 183 mm (5.7 in x 7.2 in), unchanged across series. |
| Displacement | 18.1 L (about 1,104-1,106 in3), unchanged across series. |
| Gross power (earlier series) | 334 kW (448 hp). |
| Net power (earlier series, ISO 9249/SAE J1349) | 306 kW (410 hp) at rated speed; net ISO 14396 rating listed separately at 329 kW (441 hp). |
| Gross power (Tier 4 Final series) | 350 kW (469 hp, SAE J1995, fan losses excluded); ISO 14396 gross rating 343 kW (460 hp). |
| Net power (Tier 4 Final series, SAE J1349/ISO 9249) | 325 kW (436 hp). |
| Rated engine speed | 1,800-1,833 rpm depending on series. |
| Altitude capability | Earlier series: full rated output with no derating to 2,286 m (7,500 ft); optional high-altitude arrangement extends full performance to 4,420 m (14,500 ft). |
Weights
| Configuration lineup | Offered as a single frame size: base dozer and a factory Waste Handler (landfill) variant. No Standard/XL/LGP width options are offered on this model, unlike the smaller D6T-D8T dozers. |
| Operating weight, earlier series (SU blade + single-shank ripper, standard shoes) | 50 098 kg (110,447 lb). |
| Operating weight, earlier series (U blade + single-shank ripper) | 50 623 kg (111,605 lb). |
| Operating weight, earlier series (SU blade + multi-shank ripper) | 50 794 kg (111,983 lb). |
| Shipping weight, earlier series (bare chassis with cab, track, ROPS) | 37 792 kg (83,317 lb). |
| Operating weight, Tier 4 Final series (SU blade + single-shank ripper, standard shoes) | 48 361 kg (106,618 lb). |
| Operating weight, Tier 4 Final series (U blade + single-shank ripper) | 48 956 kg (107,929 lb). |
| Operating weight, Tier 4 Final series (SU blade + multi-shank ripper) | 49 061 kg (108,160 lb). |
| Shipping weight, Tier 4 Final series | 36 316 kg (80,062 lb). |
| Operating weight, Waste Handler variant (earlier-tier engine, U-blade w/ dual tilt and striker bar box) | 49 761 kg (109,705 lb). |
| Operating weight, Waste Handler variant (Tier 4 Final engine, same equipment basis) | 50 109 kg (110,471 lb). |
| Note on weight variance | Published operating weight for the same nominal blade/ripper basis differs by several hundred kilograms between the earlier and Tier 4 Final factory literature; third-party spec aggregators generally track closer to the newer (lighter) figure. Treat the exact figure as configuration- and print-revision-dependent. |
Dimensions
| Ground clearance | 595-596 mm (23.4-23.5 in). |
| Track gauge | 2250 mm (88.6 in). |
| Width without trunnions, standard shoe | 2870-2931 mm (113.0-115.4 in), varies by series. |
| Width over trunnions | 3309-3310 mm (130.3 in). |
| Height, top of FOPS cab | 3818-3820 mm (150.3-150.4 in). |
| Height, top of stack/exhaust | 3876-3932 mm (152.6-154.8 in), varies by series. |
| Height, top of ROPS canopy | 3996-4000 mm (157.3-157.5 in). |
| Drawbar height (center of clevis) | 763 mm (30.0 in). |
| Length of track on ground | 3470-3474 mm (136.6-136.8 in). |
| Overall length, basic tractor (no blade or drawbar) | 4910-4911 mm (193.3 in). |
| Length, basic tractor with drawbar | 5242 mm (206.4 in). |
| Length, basic tractor with winch | 5545 mm (218.3 in). |
| Length with SU blade | 6601 mm (259.9 in). |
| Length with U blade | 6967 mm (274.3 in). |
| Length with single-shank ripper | 6529 mm (257.0 in). |
| Length with multi-shank ripper | 6538 mm (257.4 in). |
| Overall length, SU blade with single-shank ripper | 8219 mm (323.6 in). |
| Standard track shoe width | 610 mm (24 in); factory shoe options range roughly 560-760 mm (22-30 in) across Extreme Service, Super Extreme Service, and Moderate Service grouser styles depending on series and application. |
| Ground contact area, standard shoe | 4.24 m2 (6,569 in2). |
Performance
| Forward travel speed, 1st/2nd/3rd gear | 3.9 / 6.8 / 11.7 km/h (2.4 / 4.2 / 7.3 mph). |
| Reverse travel speed, 1st/2nd/3rd gear | 4.7 / 8.4 / 14.3 km/h (2.9 / 5.2 / 8.9 mph). |
| Transmission type | Electronically controlled powershift with planetary differential steer; full power is maintained to both tracks through a turn rather than being bled off through clutch-brake steering. |
| Drawbar pull, 1st gear forward | about 716.5 kN (161,000 lbf). |
| Drawbar pull, 2nd gear forward | about 400.5 kN (90,000 lbf). |
| Drawbar pull, 3rd gear forward | about 222.5 kN (50,000 lbf). |
| Ground pressure, standard shoe | Roughly 112-117 kPa (16.2-17.0 psi) depending on blade, ripper, and series — dozers with the larger U blade or multi-shank ripper sit toward the high end of the range. |
| Gradeability | Not published in factory literature for this model; confirm site-specific traction and grade capability with your dealer using the drawbar-pull-versus-speed curve. |
| High-altitude performance | Standard engine holds full rating to 2,286 m (7,500 ft); optional high-altitude arrangement extends full performance to 4,420 m (14,500 ft). |
Blades
| Blade lineup | Semi-Universal (SU) and Universal (U) blades only. No S, A, or VPAT blade is offered on this model. |
| Semi-Universal (SU) blade capacity | 13.5 m3 (17.7 yd3), per SAE J1265. |
| SU blade width over end bits | 4310-4350 mm (169.7-171.3 in), varies by series. |
| SU blade height | 1934 mm (about 76 in). |
| SU blade maximum digging depth | 606 mm (23.9 in). |
| SU blade ground clearance at full lift | 1422 mm (56 in). |
| SU blade maximum tilt | 940 mm (37 in). |
| Universal (U) blade capacity | 16.4 m3 (21.4 yd3), per SAE J1265. |
| U blade width over end bits | 4650-4680 mm (183.0-184.3 in), varies by series. |
| U blade height | 1934 mm (about 76 in). |
| U blade maximum digging depth | 606 mm (23.9 in). |
| U blade ground clearance at full lift | 1422 mm (56 in). |
| U blade maximum tilt | 1014 mm (39.9 in). |
| Blade construction | Box-section moldboard in high-tensile steel with bolt-on hardened cutting edges and end bits; optional dual-tilt hydraulics available on either blade. |
| Waste Handler SU landfill blade with trash rack | 28.8 m3 (37.6 yd3) capacity, 4354 mm (14 ft 3 in) width — factory work-tool option for the Waste Handler variant only. |
| Waste Handler U landfill blade with trash rack | 33.5 m3 (43.8 yd3) capacity, 4686 mm (15 ft 4 in) width; an extended aftermarket work-tool version reaches about 38.8 m3 (50.8 yd3) at 5522 mm (18 ft 1 in) width. |
| Ripper attachments (optional) | Single-shank and multi-shank adjustable-parallelogram rippers are offered. Single-shank penetration force runs about 154 kN (34,600 lbf); multi-shank penetration force runs about 148 kN (33,200 lbf). |
Service capacities
| Fuel tank, earlier series | 889 L (235 gal). |
| Fuel tank, Tier 4 Final series | 821 L (217 gal) — reduced from the earlier series to make room for the DEF tank. |
| DEF tank, Tier 4 Final series only | 36 L (9.5 gal). |
| Cooling system | 98-101 L (25.9-26.7 gal), varies by series. |
| Engine crankcase, with filter | 34-37 L (9.0-9.7 gal), varies by series. |
| Powertrain (transmission/bevel gear/steering case) | 164 L (about 43.3-43.4 gal). |
| Final drive, per side | 15 L (3.9 gal). |
| Track roller frame, per side | 45 L (11.7-11.9 gal). |
| Pivot shaft compartment | 30 L (7.9 gal). |
| Hydraulic tank, oil only | 89 L (23.5 gal). |
| Optional winch oil capacity | 15 L (4 gal). |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D9T fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filters) | 37 L (9.7 US gal) | Cat DEO-ULS (API CK-4) diesel engine oil, SAE 15W-40 for -10 to 50°C (14-122°F) or SAE 10W-30 for -18 to 40°C (0-104°F). Cat DEO-ULS SYN SAE 5W-40 covers down to -30°C (-22°F); Cat DEO Cold Weather SAE 0W-40 for arctic use to -40°C (-40°F). This Tier 4 Final engine requires low-ash CK-4 oil paired with ultra low sulfur diesel; acceptable commercial alternatives are limited to API CK-4, Cat ECF-3/API CJ-4, or ACEA E9. |
| Cooling system | 98 L (25.9 US gal) | Cat ELC (Extended Life Coolant), factory-fill 50/50 premix with water, gives freeze protection to -37°C (-34°F); Cat ELC concentrate extends protection to -52°C (-62°F). A minimum 50 percent glycol concentration is required because the engine's NOx Reduction System needs added cavitation and boil protection. Rated service life is 12,000 hours or 6 years, with Cat ELC Extender added at the midpoint. |
| Fuel tank | 821 L (217 US gal) | Ultra Low Sulfur Diesel, 15 ppm sulfur maximum, required for the SCR/DPF-equipped engine; minimum cetane number 40. Biodiesel blends up to B20 are acceptable on this ACERT engine family when built to Cat's distillate/biodiesel blend-stock specification; the CK-4 engine oil requirement still applies. |
| DEF tank | 36 L (9.5 US gal) | Diesel Exhaust Fluid meeting ISO-22241, a 32.5 percent urea solution. Agricultural-grade urea solutions are not an acceptable substitute. |
| Transmission / power train (planetary powershift transmission + bevel gear / differential-steering case, combined) | 164 L (43.3 US gal) total | The D9T's modular transmission and bevel gear slide into one rear case and share a single sump with the electro-hydraulic differential-steering system, so the fluid chart lists one combined Power Train capacity rather than separate transmission, bevel-gear, and steering-clutch figures used on older cable-steered Cat dozers. Cat TDTO, factory-fill SAE 30 for 0 to 35°C (32-95°F); SAE 10W for -20 to 10°C (-4-50°F); SAE 50 for 10 to 50°C (50-122°F); Cat TDTO Cold Weather SAE 0W-20 down to -40°C (-40°F); Cat TDTO-TMS multigrade covers the broadest range, -15 to 43°C (5-110°F), and resists cold-weather clutch glazing. Commercial substitutes must meet Cat TO-4. |
| Final drives (each) | 15 L (3.9 US gal) each | Elevated double-reduction planetary final drives. For moderate or intermittent duty: Cat FDAO SAE 60 (factory-preferred, -25 to 50°C/-13-122°F), Cat TDTO SAE 50 or SAE 30, or Cat FDAO SYN multigrade, which covers the widest span at -40 to 50°C (-40-122°F). Severe or continuous multi-shift operation narrows the usable temperature range for the same products; verify against duty cycle. |
| Roller frames (each) | 45 L (11.9 US gal) each | Same Cat TDTO product family as the pivot shaft and final drives: factory-fill SAE 30 (-20 to 25°C/-4-77°F), SAE 10W or Cat TDTO Cold Weather SAE 0W-20 for cold climates, SAE 50 for hot climates, Cat TDTO-TMS multigrade for the broadest range. |
| Pivot shaft compartment | 30 L (7.9 US gal) | Track roller frame recoil spring and pivot shaft bearings draw from the same Cat TDTO lineup as the final drives and roller frames: factory-fill SAE 30, SAE 10W or Cat TDTO Cold Weather SAE 0W-20 in cold climates, SAE 50 in hot climates, Cat TDTO-TMS multigrade for wide-range service. |
| Hydraulic system / tank (oil only) | 89 L (23.5 US gal) | Cat HYDO Advanced 10, SAE 10W, is the factory fill for -20 to 40°C (-4-104°F); Cat HYDO Advanced 20 (SAE 20W) or HYDO Advanced 30 (SAE 30) suit warmer climates; Cat Bio HYDO Advanced (ISO 46 multigrade, -30 to 45°C/-22-113°F) where a biodegradable fluid is required. HYDO Advanced fluids support longer oil-drain intervals than commercial hydraulic oils. |
| Grease points (equalizer bar end pins, fan drive belt tightener, winch drum bearing and fairlead, lift cylinder yoke bearing, blade tilt brace, track adjusters) | No single reservoir; serviced via grease fittings, remote bank for equalizer bar end pins | Cat Extreme Application Grease, NLGI 1 or 2, for heavy or severe-impact service, -35 to 50°C (-31-122°F); Cat Prime Application Grease, NLGI 2, for medium duty, -20 to 40°C (-4-104°F); Cat Utility Grease, NLGI 2, for light duty, -30 to 40°C (-22-104°F). Fan drive bearings use Cat Ball Bearing Grease, NLGI 2. Track pins and bushings run sealed and lubricated for life under the Positive Pin Retention design and are not field-greased. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar D9T maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the D9T beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on C18 engine oil, powershift/final drive TDTO, and hydraulic HYDO oil on every scheduled interval to catch turbocharger wear, clutch-pack slip, or final drive seal wear before failure. Track ELC coolant condition to protect the aluminum bar-plate radiator on Tier 4 Final builds. Log elevated-sprocket and bogie-suspension bushing wear on a gauge schedule, not by feel, since this undercarriage isolates shock loads but still wears steadily under mining and ripping duty.
Corrective & Common Repairs
Typical D9T repairs center on bogie-suspension and elevated-sprocket bushing wear, final drive output seal leaks, and blade lift/tilt cylinder cross-tube wear from heavy push loads. Ripper shank and multi-shank pin/bushing sets wear fast in rock. Powershift clutch-pack modulation valve issues show up as harsh or delayed shifts. Tier 4 Final units add cooling-package leaks at the bar-plate radiator and occasional control-system sensor faults. Turbocharger and injector work on the C18 usually follows oil-analysis trends rather than a fixed hour count.
Overhaul & Rebuild Points
Major rebuild points on the D9T are the elevated-sprocket undercarriage (track chain, rollers, idlers, sprocket segments), the powershift transmission and torque converter clutch packs, and the final drive planetaries. Plan undercarriage rebuild around wear-gauge readings rather than a flat hour figure, since ripping and mining duty accelerate wear. C18 in-frame overhaul work on liners, pistons, and the valve train should follow oil-analysis trend lines. Rebuilding the bogie-suspension pivots restores the ground-contact advantage the elevated-sprocket design is built around.
Seasonal & Environment Servicing
In cold climates, use arctic-grade Cat DEO, keep coolant heaters and block heaters serviceable, and check ether-start and glow systems before winter. In hot, dusty mining or quarry sites, service the primary and secondary air filters more often and keep the radiator core and Tier 4 Final bar-plate cooler clear of debris to prevent overheating. In wet or muddy ground, check track sag more frequently, inspect hydraulic cylinder seals for water ingress, and increase grease frequency on ripper and blade pivots.
D9T common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0749 | Filter-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 5D-5957 | Seal-O-Ring | Fuel system service | Check fitment → |
| 123-6855 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D9T fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 0100-03 | Engine Oil Pressure Sensor Circuit - Voltage Above Normal. Engine ECM reads the oil pressure sensor signal above the valid range. | Open circuit or short to a high-voltage source on the sensor wiring, a corroded connector, or a failed sensor. | Inspect the sensor connector and harness for damage or corrosion. Check sensor supply voltage against spec. Replace the sensor if wiring checks out good. |
| 0110-03 | Engine Coolant Temperature Sensor Circuit - Voltage Above Normal. ECM sees an out-of-range high signal from the coolant temperature sensor. | Open circuit, corroded connector, or a failed coolant temperature sensor. | Check sensor wiring and connector for corrosion or damage. Verify sensor resistance/voltage against spec. Replace the sensor if the circuit tests good. |
| 0168-02 | Electrical System Voltage - signal erratic, intermittent, or out of range. Flags unstable charging or battery voltage at the ECM; the exact failure mode (high, low, or erratic) varies by fault. | Loose or corroded battery terminals/ground straps, a failing alternator, or a chafed wire in the charging circuit. | Check battery terminals, ground straps, and alternator output first. Clean and tighten connections, then retest charging voltage under load. |
| 1469 | Steering Motor Speed Sensor #1 - ECM commands a steer input but sees no matching motor speed signal. | Sensor mounting or air-gap fault, damaged sensor wiring, or a hydraulic-side problem (stuck steer solenoid valve, internal steer motor leakage, or a steer pump fault) that keeps the motor from actually turning. | Check sensor mounting and wiring first. If sensor and wiring read good, move to the hydraulic steering circuit - solenoid valves, steer motor, and steer pump. |
| 1470 | Steering Motor Speed Sensor #2 - same signal-loss fault as sensor #1, on the opposite steering channel. | Same as sensor #1: sensor, wiring, or a hydraulic-side fault preventing a real motor speed signal. | Run the same check sequence as 1469 - sensor and wiring first, then the hydraulic steer circuit for that side. |
| E360 | Low Engine Oil Pressure event. Condition-based alert - oil pressure actually reads below the threshold for current engine speed and temperature, not just a sensor circuit fault. | Low oil level, worn oil pump, plugged suction screen, wrong oil viscosity, or a sensor accurately reporting a genuinely low pressure. | Stop and check oil level right away. Verify sensor accuracy, then inspect the pump and suction screen if level and sensor check out. |
| E361 | High Engine Coolant Temperature event. Condition-based alert that actual coolant temperature has passed the safe operating threshold. | Low coolant level, a plugged or debris-covered radiator core, a failing fan or fan drive, a water pump fault, or a stuck thermostat. | Reduce load and let the engine idle down. Check coolant level once safe, inspect the radiator core and fan operation, then pressure-test the cooling system if the fault repeats. |
| E1389 | Aftertreatment/regeneration operator-inducement event, Level 3. Applies to Tier 4 Final-configured engines with a particulate filter; the emissions fault went unresolved through earlier warning levels and the engine now derates hard to idle with rolling shutdowns until serviced. | A stored aftertreatment fault ignored through the earlier warning levels, or a parked regeneration that failed to complete or was repeatedly interrupted. | Do not keep operating through the alarm. Have the underlying aftertreatment fault diagnosed and cleared, then run a technician-commanded regeneration to reset the inducement. |
| E2143 | Low Engine Coolant Level event. The coolant level sensor in the expansion tank reads below level for longer than the allowed delay. | An external coolant leak, low coolant top-up, or a faulty level sensor or its wiring. | Check coolant level and inspect for external leaks (hoses, radiator, water pump) before topping up. Test the level sensor if level reads correct but the fault stays active. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D9T attachments & work tools
Blades
The D9T's factory blade lineup for this dozer size is semi-U (9SU) and full-U (9U) only — a straight S-blade or a true angling/VPAT six-way blade isn't offered at this size class. The semi-U (9SU) blade is about 4.35 m (171 in) wide by 1.93 m (76 in) tall with roughly 13.5 m3 (17.7 yd3) capacity; the taller full-U (9U) blade is about 4.68 m (184 in) wide with roughly 16.4 m3 (21.4 yd3) capacity. Blade control is single-tilt (standard) or dual-tilt (optional), with an automated blade-assist function (pre-set dig/carry/spread pitch positions) standard whenever dual tilt is fitted; abrasion-resistant and landfill-duty blade finishes are also offered.
Rippers
Two ripper families fit the D9T: a single-shank parallelogram ripper (also offered as a deep-ripper version with a pin-puller for shank-depth adjustment) for maximum penetration in hard or rocky ground, and a multi-shank ripper for higher-output work in lighter, less consolidated material, run with fewer or more shank positions to suit conditions. Both use a hammerless tip and shank-protector retention system for faster, safer point changes versus older pin-and-hammer designs. Shipping weight varies by shank count and wear-package selection, so treat any single quoted weight as approximate.
Winches
The D9T sits in the dozer class (roughly D8T through D10T) where Cat has long offered a mechanical PTO-driven towing winch taken off the torque-converter output rather than a hydraulic-motor winch, giving higher line pull than an equivalent hydraulic unit on smaller dozers. Cat-line heavy-duty winches for this class are cataloged with maximum single-wrap line pull roughly in the 55,000-64,000 kg (120,000-140,000 lb) range; exact rated pull, drum capacity and cable diameter vary by winch and cable selection, so confirm against the specific winch fitted.
Drawbars/Counterweights
A rear drawbar and a bolt-on rear counterweight (roughly 3,700-3,705 kg / 8,150-8,169 lb) are both listed rear-end options; the plain counterweight is recommended whenever the tractor doesn't carry a winch or other rear attachment, to keep the machine balanced for dozing. Waste-handling configurations instead use a heavier rear striker-bar package — striker bar, storage box, drawbar, a stacked (multi-slab) counterweight and a transmission guard — sized for repeated pile-pushing and reverse impacts rather than fine grading.
Cab/ROPS guarding (forestry/waste)
The D9T cab is ROPS/FOPS protected as standard, meeting rollover and falling-object structure levels suited to windrow and pile debris. For waste and quarry duty, the factory guarding package adds underbody/bottom guards (front-counterweight, partial, or full sealed options), a fuel-tank guard and idler/undercarriage guards to keep debris out of vital components. The dedicated waste-handler variant pairs this guarding with special trash-rack blades (semi-U and full-U trash-rack versions, plus a larger-capacity full-U option) built to shed debris while pushing waste; heavier screened cab guarding for log or brush impact in forestry duty is typically a dealer- or third-party-fitted addition rather than a standard factory line item on this model.
Hydraulic arrangement (front/rear tools)
Blade lift, tilt and pitch run off the main implement pump through an electro-hydraulically controlled valve group; the auxiliary/implement circuit relief pressure is reported in a broad 200-260 bar (roughly 3,000-3,800 psi) band depending on circuit and configuration, so treat any single figure as approximate and check the build-specific spec sheet. The rear ripper's lift and tilt cylinders share this same implement/auxiliary circuit. The optional rear towing winch is the exception — it is driven mechanically off a torque-converter PTO output rather than the hydraulic system, which is why it can out-pull a hydraulic-motor winch of similar size.
All D9T assemblies by section
Every catalogued assembly group for the Caterpillar D9T. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
206-7335 Aftercooler Gp-Air
| 20***35 | Aftercooler Group-Air | 1 |
| 23***14 | Baffle | 1 |
| 23***03 | Core As; (Aftercooler) | 1 |
206-7342 Air Cleaner Gp
| 12***55 | Filter Element As-Air; (Primary) | 1 |
| 12***56 | Filter Element As-Air; (Secondary) | 1 |
| 20***42 | Air Cleaner Group | 1 |
205-8588 Air Cleaner Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 20***88 | Air Cleaner Group | 1 |
| 20***41 | Body As | 1 |
205-8593 Dust Ejector Gp
| 20***93 | Dust Ejector Group | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
| 5P***97 | Clamp Fumes Disposal | 2 |
205-8595 Lines Gp-Air
| 20***95 | Lines Group-Air | 1 |
| 21***36 | Tube | 1 |
| 21***12 | Clamp-Tbolt | 3 |
206-7339 Lines Gp-Air
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 10***03 | Elbow; (Air Inlet) | 1 |
| 12***29 | Clamp; (V-Band) | 1 |
206-7346 Lines Gp-Air
| 20***46 | Lines Group-Air | 1 |
| 22***19 | Tube As | 1 |
| 2W***65 | Coupling | 1 |
220-6372 Manifold Gp-Exhaust
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 12 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 12 |
| 13***59 | Manifold-Exhaust; (End) | 2 |
222-5314 Mounting Gp-Air Cleaner
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 4 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 4 |
| 1F***50 | Nut Rops Support | 3 |
342-0631 Mounting Gp-Air Cleaner
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 1 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 1 |
| 1F***50 | Nut Rops Support | 3 |
205-8610 Muffler Gp
| 20***10 | Muffler Group | 1 |
| 31***43 | Muffler As | 1 |
| 7D***49 | Washer (Flywheel Counter Balance Weight) | 4 |
211-5053 Precleaner Ar -With Screen
| 11***30 | Spacer; (11.3x19.05x90-mm Thk) | 1 |
| 1W***20 | Valve As-Check; (Exhaust) | 1 |
| 21***53 | Precleaner Ar; -With Screen | 1 |
211-7589 Precleaner Ar -Without Screen
| 11***30 | Spacer; (11.3x19.05x90-mm Thk) | 1 |
| 1W***20 | Valve As-Check; (Exhaust) | 1 |
| 21***89 | Precleaner Ar; -Without Screen | 1 |
245-8220 Precleaner Gp -Cab Air
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 4 |
| 11***66 | Latch As | 1 |
244-3457 Precleaner Gp -Turbine
| 13***81 | Precleaner As; -Air Cleaner, Cup, Bearing | 1 |
| 14***69 | Screw-Self-Tapping; (No 10x19.05-mm) | 6 |
| 14***87 | Adapter As | 1 |
244-3459 Precleaner Gp -Turbine
| 13***81 | Precleaner As; -Air Cleaner, Cup, Bearing | 1 |
| 14***87 | Adapter As | 1 |
| 17***95 | Clamp | 2 |
308-5201 Precleaner Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***75 | Breather Baffle, Baffle, Hose | 1 |
| 28***15 | Precleaner Group-Cab Air | 1 |
231-7913 Shield Gp-Manifold
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 23***13 | Shield Group-Manifold | 1 |
| 23***20 | Shield As; (Lh) | 1 |
239-9667 Turbocharger Gp
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 23***05 | Turbocharger Group | 1 |
| 23***67 | Turbocharger Group | 1 |
Basic Engine
133-9907 Adapter Gp-Pump Drive
| 13***06 | Adapter | 1 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 1B***67 | Ball Bearing | 2 |
278-5662 Base Gp-Valve Cover & Inj Harn
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***34 | Kit-Receptacle; (12-Pin)(Valve Cover & Inj Harness) | 1 |
| 12***72 | Bolt; (5/16-18x2.36-In) | 1 |
234-5005 Base Gp-Valve Cover & Inj Harn
| 10***18 | Clip | 3 |
| 10***19 | Clip | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
234-7935 Camshaft Gp
| 10***89 | Cover | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 3 |
| 23***35 | Camshaft Group | 1 |
8n-3148 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 4N***99 | Gasket; (Oil Drain) | 2 |
| 4W***90 | Cover | 2 |
216-5540 Cover Gp-Flywheel Housing
| 21***40 | Cover Group-Flywheel Housing; -Bottom | 1 |
| 21***00 | Cover | 1 |
| 4M***80 | Gasket Elbow Mtg Part Of Kit P/N 5r***26 | 1 |
220-6390 Cover Gp-Flywheel Housing
| 22***90 | Cover Group-Flywheel Housing | 1 |
| 4N***14 | Cover | 1 |
| 6V***29 | Bolt; (M16x2.0x40mm) | 3 |
159-6159 Cover Gp-Front Housing
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 15***59 | Cover Group-Front Housing | 1 |
| 16***71 | Seal | 1 |
238-1262 Cover Gp-Sound Suppression
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 8 |
| 10***20 | Panel As-Sound Suppression | 1 |
| 23***62 | Cover Group-Sound Suppression | 1 |
160-7452 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 15***36 | Cover As-Valve Mechanism | 1 |
| 16***52 | Cover Group-Valve Mechanism | 1 |
256-3820 Cover Gp-Valve Mechanism
| 23***16 | Breather Group; -Crankcase-Valve Mechanism | 1 |
| 25***20 | Cover Group-Valve Mechanism | 1 |
| 25***24 | Cover Group-Valve Mechanism | 1 |
236-2230 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 22***47 | Cover Group-Valve Mechanism | 1 |
| 23***30 | Cover Group-Valve Mechanism | 1 |
256-3818 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 0 |
| 24***37 | Seal; (Cover, Valve Mechanism) | 1 |
| 24***59 | Fastener Group-Valve Mechanism | 6 |
225-1148 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 22***44 | Cover-Valve | 1 |
| 22***48 | Cover Group-Valve Mechanism | 1 |
256-3824 Cover Gp-Valve Mechanism
| 24***37 | Seal; (Cover, Valve Mechanism) | 1 |
| 24***59 | Fastener Group-Valve Mechanism | 6 |
| 25***24 | Cover Group-Valve Mechanism | 1 |
286-7168 Cover Gp-Valve Mechanism
| 22***48 | Cover Group-Valve Mechanism | 2 |
| 23***30 | Cover Group-Valve Mechanism | 1 |
| 28***68 | Cover Group-Valve Mechanism | 1 |
150-3135 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 15***57 | Cover-Valve Mech | 1 |
| 15***35 | Cover Group-Valve Mechanism | 1 |
225-1150 Cover Gp-Valve Mechanism
| 22***50 | Cover Group-Valve Mechanism | 1 |
| 23***16 | Breather Group; -Crankcase-Valve Mechanism | 1 |
| 23***30 | Cover Group-Valve Mechanism | 1 |
230-3818 Cover Gp-Valve Mechanism -No Oil Fill
| 23***18 | Cover Group-Valve Mechanism; -No Oil Fill | 1 |
| 25***18 | Cover Group-Valve Mechanism | 2 |
| 25***20 | Cover Group-Valve Mechanism | 1 |
256-3826 Cover Gp-Valve Mechanism
| 25***26 | Cover Group-Valve Mechanism | 1 |
| 25***29 | Cover-Valve | 1 |
| 6V***00 | Seal-O-Ring; (53.64mm Id) | 1 |
225-1147 Cover Gp-Valve Mechanism
| 22***47 | Cover Group-Valve Mechanism | 1 |
| 27***83 | Seal-O-Ring | 1 |
| 7C***14 | Adapter | 1 |
160-7451 Cover Gp-Valve Mechanism
| 15***35 | Cover Group-Valve Mechanism | 2 |
| 16***51 | Cover Group-Valve Mechanism | 1 |
| 16***52 | Cover Group-Valve Mechanism | 1 |
223-9732 Crankshaft Gp
| 18***81 | Gear-Crankshaft; (80-Teeth) | 1 |
| 18***18 | Crankshaft As | 1 |
| 22***32 | Crankshaft Group | 1 |
323-8451 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 12 |
| 26***31 | Cylinder Block As | 1 |
229-8568 Cylinder Block As
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 16***83 | Bolt; (7/8-14x7.5-In) | 14 |
| 22***68 | Cylinder Block As | 1 |
267-4631 Cylinder Block As
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 26***31 | Cylinder Block As | 1 |
| 3P***23 | Bolt-Bearing Cap; (7/8-14x7.75-In) | 14 |
261-0052 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
301-3018 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
261-0191 Cylinder Block Gp
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
223-7263 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
281-1640 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
243-0943 Cylinder Head As
| 15***82 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 16***42 | Insert-Valve Seat; (0.76-mm Os Od, Exhaust)(Standard) | 0 |
| 16***43 | Insert-Valve Seat; (0.76-mm Os Od, Inlet) | 0 |
243-6741 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
235-2974 Cylinder Head Gp
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 10 |
| 12***54 | Bolt-12 Point Head; (3/4-16x8.5-In) | 1 |
| 12***55 | Bolt-12 Point Head; (3/4-16x7.638-In) | 1 |
223-9250 Cylinder Head Gp
| 15***23 | Valve; (Inlet) | 12 |
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
263-5055 Cylinder Head Gp
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 18***01 | Rotocoil Assem. | 24 |
274-1953 Cylinder Head Gp
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 10 |
| 12***54 | Bolt-12 Point Head; (3/4-16x8.5-In) | 1 |
| 12***55 | Bolt-12 Point Head; (3/4-16x7.638-In) | 1 |
212-2113 Damper & Pulley Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 16***30 | Damper As | 1 |
| 1B***23 | Bolt; (5/8-18x7-In) | 6 |
108-9382 Fastener Gp-Front Housing
| 10***82 | Fastener Group-Front Housing | 1 |
| 14***68 | Stud-Taperlock | 2 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 2 |
227-3033 Fastener Gp-Front Housing
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 22***33 | Fastener Group-Front Housing | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 2 |
4p-6846 Fastener Gp-Front Housing
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 4P***46 | Fastener Group-Front Housing; -Remote | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 2 |
243-5194 Fastener Gp-Oil Pan
| 24***94 | Fastener Group-Oil Pan | 1 |
| 2P***03 | Bolt-Washer Head; (3/8-16x1.25-In) | 1 |
109-1657 Fastener Gp-Valve Mechanism
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 5J***94 | Screw,Cap,Socket He Manifold Mtg | 12 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 6 |
209-7307 Flywheel Gp
| 0V***23 | Bolt 4.25 In. (10.795 cm) Long | 12 |
| 20***06 | Flywheel As | 1 |
| 20***07 | Flywheel Group | 1 |
204-9316 Gear Gp-Camshaft
| 10***26 | Dowel | 1 |
| 20***16 | Gear Group-Camshaft | 1 |
| 9X***72 | Bolt-Locking; (3/8-16x0.875-In) | 16 |
207-0449 Gear Gp-Front
| 03***85 | Bolt-12 Point Hd-Engine Flywheel To | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***68 | Bearing-Sleeve | 1 |
220-6365 Gear Gp-Rear
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 12 |
| 18***23 | Bolt-12 Point Head; (M12x1.75x60-mm) | 8 |
| 20***98 | Gear As; (51-Teeth) | 1 |
220-6368 Housing Gp-Flywheel
| 14***95 | Plug As | 2 |
| 14***11 | Plug Group | 2 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 4 |
243-5644 Housing Gp-Front -Sound Suppression
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
225-8363 Housing Gp-Front
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 7 |
111-2355 Lifting Gp-Engine
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 11***44 | Eye-Lifting | 1 |
| 11***55 | Lifting Group-Engine; (Front) | 1 |
220-6370 Lifting Gp-Engine
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 22***70 | Lifting Group-Engine | 1 |
| 22***24 | Eye-Lifting | 1 |
190-0009 Mechanism Gp-Fuel Pump & Valve
| 19***09 | Mechanism Group-Fuel Pump & Valve | 1 |
| 32***36 | Rocker Arm Group; -Non-Brake | 3 |
| 34***43 | Bridge-Valve | 12 |
148-7482 Mechanism Gp-Fuel Pump & Valve
| 14***82 | Mechanism Group-Fuel Pump & Valve | 1 |
| 19***98 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
280-2167 Mechanism Gp-Fuel Pump & Valve
| 27***29 | Rocker Arm Group | 3 |
| 28***67 | Mechanism Group-Fuel Pump & Valve | 1 |
| 6I***58 | Bridge-Valve | 12 |
205-4709 Mounting Gp-Engine
| 1D***27 | Bolt,Machine Head Mtg Uoc:Bsv,Bsx | 6 |
| 20***09 | Mounting Group-Engine | 1 |
| 22***71 | Bolt-12 Point Head; (M16x2x45-mm) | 14 |
313-3754 Pan Gp-Oil -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 11***85 | Pan-Front Oil | 1 |
7w-0158 Pan Gp-Oil -Engine
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
107-7378 Pan Gp-Oil
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
220-1441 Piston & Rod Gp
| 15***25 | Bolt; (7/16-14-2a-Thd) | 1 |
| 18***50 | Pin-Piston | 1 |
| 18***03 | Ring-Piston; (Intermediate) | 1 |
353-9982 Plate As-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 9 |
| 12***27 | Washer-Special; (Sealing)(Sealing) | 2 |
| 12***28 | Stud; (Brake) | 12 |
305-9196 Plug Gp-Cylinder Block
| 30***96 | Plug Group-Cylinder Block | 1 |
| 6V***65 | O-Ring - For Oil Fill Plug | 1 |
| 9S***10 | Plug; (Straight Thread O-Ring)(Cylinder Head) | 1 |
225-6329 Plug Gp-Cylinder Block
229-9477 Plug Gp-Cylinder Block
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 22***77 | Plug Group-Cylinder Block | 1 |
| 23***80 | Seal-O-Ring | 1 |
229-6711 Plug Gp-Cylinder Head
| 18***07 | Plug As; (Hi Tempertature) | 4 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***11 | Plug Group-Cylinder Head | 1 |
328-4236 Rocker Arm Gp -Non-Brake
| 30***22 | Shaft As-Rocker Arm, Exhaust Manifold | 1 |
| 32***96 | Rocker Arm Group; -Intake | 4 |
| 32***36 | Rocker Arm Group; -Non-Brake | 1 |
328-4238 Rocker Arm Gp -Exhaust
| 06***39 | Seal-O-Ring | 1 |
| 19***51 | Button; (24-mm Od) | 1 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 1 |
320-2796 Rocker Arm Gp -Intake
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
| 27***17 | Nut; (3/8-24-Thd) | 1 |
198-9898 Rocker Arm Gp
| 03***13 | Seal-O-Ring | 2 |
| 06***39 | Seal-O-Ring | 2 |
| 19***51 | Button; (24-mm Od) | 2 |
278-1929 Rocker Arm Gp
| 06***39 | Seal-O-Ring | 2 |
| 19***51 | Button; (24-mm Od) | 2 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 2 |
319-0785 Seal Gp-Crankshaft -Rear
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
319-7401 Seal Gp-Crankshaft -Front
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 31***01 | Seal Group-Crankshaft; -Front | 1 |
229-3693 Support Gp-Engine
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
| 22***93 | Support Group-Engine | 1 |
| 24***33 | Support As-Engine | 1 |
205-8609 Suppression Ar-Sound -European Market
| 20***09 | Suppression Ar-Sound; -European Market | 1 |
| 21***81 | Enclosure Group-Engine; -Sound Suppression | 1 |
| 22***13 | Valve As-Relief | 1 |
192-0542 Trunnion Gp-Engine
| 19***42 | Trunnion Group-Engine | 1 |
| 1W***14 | Adapter As | 1 |
| 2B***06 | Bolt 12 cm(4.75 In.) Long-Location "F" | 8 |
Cooling System
211-9295 Cooling Ar
| 09***35 | Spacer; (11x22x5-mm Thk) | 1 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
205-8594 Fan Gp-Suction
| 20***11 | Support As | 1 |
| 20***94 | Fan Group-Suction | 1 |
| 20***32 | Adapter | 1 |
205-8597 Lines Gp-Water
| 10***01 | Gasket | 2 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
225-4127 Lines Gp-Water
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 18***24 | Seal-O-Ring | 2 |
212-7557 Lines Gp-Water
| 06***08 | . Bolt; Socket, Clamp-Tubing | 1 |
| 11***30 | Hose As | 1 |
| 14***67 | Clamp; (Hose) | 4 |
224-3238 Pump Gp-Water
| 10***30 | Bearing As-Roller | 1 |
| 11***21 | Plug-Felt; (Water Pump Housing) | 1 |
| 12***17 | Seal Group; (Water Pump) | 1 |
224-3239 Pump Gp-Water
| 15***98 | Seal-O-Ring | 1 |
| 22***38 | Pump Group-Water | 1 |
| 22***39 | Pump Group-Water | 1 |
267-4757 Pump Gp-Water
| 12***72 | Seal-O-Ring (215.49mm Id) | 1 |
| 26***57 | Pump Group-Water | 1 |
| 35***89 | Pump Group-Water | 1 |
352-8589 Pump Gp-Water
| 10***30 | Bearing As-Roller | 1 |
| 13***07 | Retainer | 1 |
| 15***56 | Seal-Lip Type | 1 |
246-3132 Pump Gp-Water
| 10***30 | Bearing As-Roller | 1 |
| 11***21 | Plug-Felt; (Water Pump Housing) | 1 |
| 13***07 | Retainer | 1 |
257-5526 Radiator Ar -Debris Resistant
| 25***26 | Radiator Ar; -Debris Resistant | 1 |
| 30***27 | Lines Group-Hydraulic Fan; -Reversing Fan | 1 |
| 30***79 | Radiator Ar; -Hydraulic Cooling | 1 |
303-8779 Radiator Ar -Hydraulic Cooling
| 10***72 | Plug | 2 |
| 18***86 | Bolt; (M10x1.5x60-mm) | 8 |
| 25***90 | Core As-Radiator | 6 |
211-5078 Radiator Ar -Trash Resistant
| 18***86 | Bolt; (M10x1.5x60-mm) | 8 |
| 21***78 | Radiator Ar; -Trash Resistant | 1 |
| 25***90 | Core As-Radiator | 7 |
205-8611 Radiator Gp
| 10***72 | Hose; (Radiator) | 6 |
| 11***21 | Cap | 1 |
| 1F***50 | Nut Rops Support | 10 |
206-7365 Tank Gp-Coolant
| 03***19 | Cap As-Radiator | 1 |
| 20***65 | Tank Group-Coolant | 1 |
| 22***95 | Tank As-Coolant | 1 |
206-7364 Tank Gp-Coolant
| 11***28 | Elbow; (90-Deg) | 1 |
| 14***12 | Adapter As | 1 |
| 15***35 | Hose As | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
197-8820 Alternator Gp-Charging
205-8587 Alternator Gp-Charging
205-8578 Battery & Wiring Gp
167-8984 Battery Gp -Rechargeable
164-9436 Block Gp-Junction -Battery
9w-0742 Block Gp-Junction -Battery
328-3107 Camera Ar -Rear
328-3656 Camera Ar
126-7631 Connection Gp-Electrical
| 12***31 | Connection Group-Electrical; (Cylinder Block Ground) | 1 |
| 15***96 | Support As | 1 |
| 15***98 | Support As | 1 |
243-1560 Control & Mtg Gp-Engine Elek
| 15***96 | Support As | 1 |
| 15***98 | Support As | 1 |
| 16***19 | Stud | 4 |
196-9987 Control & Mtg Gp-Implement -Ripper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 15***72 | Plug As-Connector; (4-Pin) | 1 |
209-2608 Control Gp-Implement -Winch
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 15***72 | Plug As-Connector; (4-Pin) | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 23***02 | Converter-Electrical; (24-Volt To 12-Volt) | 1 |
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 4 |
214-2540 Converter Gp-Electrical
| 20***56 | Electronics Group-Power Train | 1 |
| 20***57 | Electronics Group-Monitor | 1 |
| 20***58 | Electronics Group-Implement | 1 |
205-8624 Electronics Ar-Machine
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 20***24 | Electronics Ar-Machine | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 33***99 | Software Group-Implement | 1 |
| 33***00 | Service Group-Implement | 1 |
207-4458 Electronics Gp-Implement
| 20***58 | Electronics Group-Implement | 1 |
| 26***77 | Configuration-Premium | 1 |
307-1613 Electronics Gp-Machine -Accugrade
| 30***13 | Electronics Group-Machine; -Accugrade | 1 |
| 34***10 | Main Bearing Cap, Software Group-Monitor | 1 |
| 34***11 | Service Group-Monitor | 1 |
207-4457 Electronics Gp-Monitor
| 20***57 | Electronics Group-Monitor | 1 |
| 35***52 | Software Group-Power Train | 1 |
| 35***53 | Service Group-Power Train | 1 |
207-4456 Electronics Gp-Power Train
| 20***56 | Electronics Group-Power Train | 1 |
| 24***20 | Mounting Group-Monitor; -Grade Control | 1 |
| 24***09 | Control Group-Joystick; -Bulldozer-Grade Control, Auto Carry | 1 |
245-4623 Grade Control Ar
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 24***23 | Grade Control Ar | 1 |
317-6527 Grade Control Ar -Accugrade, Advanced Tracking System
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
| 29***13 | Receiver As-Satellite; (Gnss, Ms990) | 1 |
| 31***27 | Grade Control Ar; -Accugrade, Advanced Tracking System | 1 |
332-3577 Grade Control Ar
| 11***93 | Lockwasher | 5 |
| 15***83 | Bolt-Socket Head; (M6x1x70-mm) | 2 |
| 19***31 | Adapter; (Compact) | 1 |
255-2430 Grade Control Ar-Satellite -Dual Gps
| 25***36 | Cable-Coiled; (Receiver) | 2 |
| 25***30 | Grade Control Ar-Satellite; -Dual Gps | 1 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
292-0279 Grade Control Ar-Satellite -Accugrade, Single Gps
| 24***00 | Mast As; (Satellite Receiver) | 1 |
| 27***46 | Sensor As-Position; (As400tc)(Angle) | 1 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
290-5571 Grade Control Ar-Satellite -Accugrade, Dual Gnss
| 25***36 | Cable-Coiled; (Receiver) | 1 |
| 25***51 | Cable-Coiled; (Angle Sensor) | 1 |
| 27***46 | Sensor As-Position; (As400tc)(Angle) | 1 |
290-5570 Grade Control Ar-Satellite -Accugrade, Dual Gps
| 24***00 | Mast As; (Satellite Receiver) | 2 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
| 28***24 | Display Group-Monitor; -Light Bar | 3 |
292-0280 Grade Control Ar-Satellite -Accugrade, Single Gnss
| 29***80 | Grade Control Ar-Satellite; -Accugrade, Single Gnss | 1 |
| 30***18 | Guard | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 1 |
306-7420 Guard Gp-Alternator
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 17***32 | Bolt-Hex Head; (M4x0.7x16mm) | 2 |
| 19***81 | Cord As | 1 |
213-6673 Heater Gp-Jacket Water
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 17***32 | Bolt-Hex Head; (M4x0.7x16mm) | 2 |
| 19***28 | Receptacle As | 1 |
214-2539 Heater Gp-Jacket Water
| 10***40 | Bracket | 1 |
| 10***23 | Hose | 2 |
| 11***89 | Heater As; (Fuel, Coolant) | 1 |
205-8586 Heater Gp-Machine -Fuel
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
277-5252 Installation Ar-Caes
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
255-4206 Installation Gp-Communication -Product Link 321sr
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
153-2073 Lamp Gp-Flood
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 1 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
247-0294 Lamp Gp-Flood -Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
| 22***72 | Bracket As | 1 |
277-0467 Lamp Gp-Flood -Hid
| 11***14 | Bracket Assem. | 4 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 4 |
| 1F***50 | Nut Rops Support | 1 |
147-0319 Lamp Gp-Flood
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
234-4323 Lamp Gp-Flood -Engine Service
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 21***98 | Lamp As-Flood; (24 Volt)(70 Watt)(Clear) | 1 |
247-0293 Lamp Gp-Flood -Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 21***98 | Lamp As-Flood; (24 Volt)(70 Watt)(Clear) | 1 |
224-5139 Lighting Gp-Flood -Rops, Fuel Tank, Cylinder-Waste Handling
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
224-5142 Lighting Gp-Flood -Rops, Fender, Cylinder-Front, Rear Floodlights
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
224-5144 Lighting Gp-Flood -Cylinder, Fuel Tank, Rops-Rops, Cylinder Mounted-Waste Handling
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
224-5137 Lighting Gp-Flood
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***14 | Bracket Assem. | 6 |
134-0978 Lighting Gp-Flood -Fender, Front, Rear
| 13***78 | Lighting Group-Flood; -Fender, Front, Rear-Fender, Front | 1 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 1 |
| 16***01 | Bracket | 1 |
222-1209 Lighting Gp-Flood -Ripper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***14 | Bracket Assem. | 6 |
224-5138 Lighting Gp-Flood
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
259-1868 Lighting Gp-Warning Beacon
| 16***28 | Bracket Assem. | 1 |
| 16***98 | Cap-Rain | 1 |
| 1W***24 | Clamp-Hose | 2 |
299-7578 Lines Gp-Alternator Air -Ducted
| 24***47 | Kit-Adapter; (Mast)(Grade Control) | 1 |
| 25***79 | Screw As | 1 |
| 25***80 | Motor As | 1 |
242-9279 Lines Gp-Alternator Air
| 16***28 | Bracket Assem. | 1 |
| 16***98 | Cap-Rain | 1 |
| 1W***24 | Clamp-Hose | 2 |
292-0290 Mast Gp -Satellite Receiver
| 18***44 | Screw-Flat Head; (M8x1.25x25-mm) | 3 |
| 23***26 | Boss; (1-1/8-18x0.708-In) | 3 |
| 24***60 | Box As; (Lh) | 1 |
226-2333 Mast Gp -Laser Receiver
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 24***00 | Mast As; (Satellite Receiver) | 1 |
| 29***03 | Mounting Group-Mast; -Satellite Receiver | 1 |
255-3632 Mounting Gp-Connector -Grade Control
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 6 |
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 2 |
| 23***08 | Plug As-Connector; (4-Pin) | 3 |
292-0296 Mounting Gp-Grade Control
| 23***32 | Mount-Flexible | 4 |
| 23***33 | Gasket | 2 |
| 23***34 | Clamp | 1 |
234-9970 Mounting Gp-Receiver -Mast
| 12***35 | Plug-Felt; (Unit Injector Hydraulic Pump) | 1 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
259-4756 Mounting Gp-Sensor -Atmospheric, Engine Oil
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
223-8176 Panel Gp-Fuse
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 22***76 | Panel Group-Fuse; -Heater, A/C Blower | 1 |
| 24***53 | Plug As | 1 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 23***00 | Plug Group-Connector; -Engine Harness, Protective Cover | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
286-0136 Receiver Gp-Satellite -Single Gps, Ms980
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
292-0291 Receiver Gp-Satellite -Dual Gnss, Ms992
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
300-2118 Receiver Gp-Satellite -Accugrade, Upgrade From Gps To Gnss
| 29***13 | Receiver As-Satellite; (Gnss, Ms990) | 1 |
| 30***18 | Receiver Group-Satellite; -Accugrade, Upgrade From Gps To Gnss | 1 |
292-0292 Receiver Gp-Satellite -Single Gnss, Ms992
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
286-0137 Receiver Gp-Satellite -Dual Gps, Ms980
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 2 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
248-2921 Resistor Gp-Cab Heater
| 12***40 | Resistor | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 13***12 | Fuse; (15-Ampere)(Blower Motor) | 1 |
225-6733 Sensor & Mounting Gp -Cylinder Position
| 09***79 | Pin-Spring | 1 |
| 10***44 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
254-7394 Sensor & Mtg Gp-Grade -Auto Carry
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 22***81 | Switch As-Rocker; (Auto Carry) | 1 |
231-1973 Sensor Gp-Engine
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***70 | Spacer Assem. | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
354-0041 Sensor Gp-Engine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 35***41 | Sensor Group-Engine | 1 |
124-9325 Sensor Gp-Fuel Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
266-1470 Sensor Gp-Position
| 14***58 | Receptacle As | 1 |
| 1P***24 | Bearing As-Needle | 1 |
| 1W***48 | Dowel | 2 |
160-2443 Sensor Gp-Position
| 10***64 | Screw-Pan Head; (6-19x0.5-In) | 2 |
| 14***58 | Receptacle As | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
224-5530 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 22***30 | Sensor Group-Position; -Governor, Brake Pedal | 1 |
276-5312 Sensor Gp-Position
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 27***12 | Sensor Group-Position | 1 |
222-1545 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 22***45 | Sensor Group-Position | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
239-5674 Sensor Gp-Pressure
| 23***74 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
224-4535 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 22***35 | Sensor Group-Pressure | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
276-9067 Sensor Gp-Pressure
| 13***45 | Pad; (Connector) | 1 |
| 19***03 | Sensor Group-Speed | 1 |
| 22***47 | Seal-O-Ring | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
276-8548 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***61 | Bracket | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
239-2396 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
239-3478 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***78 | Sensor Group-Pressure; -Air Inlet Manifold | 2 |
237-0957 Sensor Gp-Pressure
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
| 23***57 | Sensor Group-Pressure | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
249-0096 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
239-2395 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***95 | Sensor Group-Pressure; -Atmospheric Air | 1 |
161-9926 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
239-5928 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 23***28 | Sensor Group-Speed | 1 |
300-9806 Sensor Gp-Speed
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 30***06 | Sensor Group-Speed; -Secondary, Timing | 1 |
319-6491 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
183-4584 Sensor Gp-Speed
| 18***84 | Sensor Group-Speed | 1 |
| 20***17 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 22***47 | Seal-O-Ring | 1 |
201-6617 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
189-5746 Sensor Gp-Speed
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
214-2484 Sensor Gp-Speed
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 21***84 | Sensor Group-Speed; -Timing, Crankshaft | 1 |
234-5013 Sensor Gp-Temperature
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 18***93 | Cable As-Starting Motor | 1 |
| 1M***86 | Terminal-Ring; (0-Ga, 1/2-In Screw) | 1 |
197-8392 Sensor Gp-Temperature
| 06***61 | Cable As; (Negative) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 12***00 | Plate As; (3/8-16) | 1 |
197-8391 Sensor Gp-Temperature
| 06***61 | Cable As; (Negative) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 12***00 | Plate As; (3/8-16) | 1 |
274-7396 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
274-7395 Sensor Gp-Temperature
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
145-7028 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
234-5012 Sensor Gp-Temperature
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
209-8389 Starting Aid Gp-Ether
| 20***89 | Starting Aid Group-Ether | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
213-6675 Starting Ar-Cold Weather
| 16***36 | Block Group-Junction; -Battery | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 2 |
237-1962 Starting Motor Gp-Electric
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 23***62 | Starting Motor Group-Electric | 1 |
338-3454 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***54 | Starting Motor Group-Electric | 1 |
209-8423 Starting Motor Gp-Electric
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
6v-0885 Starting Motor Gp-Electric -Cold Weather
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
164-7577 Switch Gp-Bypass -Pto Filter-Steering Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 2H***22 | Lockwasher | 1 |
259-1869 Switch Gp-Disconnect -Battery, Auxiliary
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***69 | Switch Group-Disconnect; -Battery, Auxiliary | 1 |
134-6054 Switch Gp-Flow -Coolant
| 11***93 | Lockwasher | 1 |
| 13***54 | Switch Group-Flow; -Coolant | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
237-0151 Switch Gp-Limit -Steering Control
| 23***51 | Switch Group-Limit; -Steering Control | 1 |
| 24***19 | Mounting Bracket; (Lh) (Fabricated) | 1 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
258-0883 Switch Gp-Pressure -Fuel
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
158-6632 Switch Gp-Push Button -Horn
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 03***09 | Terminal-Ring; (For 1/4-In Bolt) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 4 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 4 |
256-2907 Target Gp-Laser
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 4 |
295-9880 Target Gp-Laser
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 4 |
239-1134 Valve Gp-Ether Starting
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
214-4763 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
243-1546 Wiring Gp-Electronic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
222-7860 Wiring Gp-Engine
| 22***60 | Wiring Group-Engine | 1 |
250-0875 Wiring Gp-Grade Control
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 6 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 15 |
| 10***50 | Drain Group-Ecology; -Transmission, Torque Converter | 1 |
261-6770 Wiring Gp-Grade Control
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***29 | Retainer | 1 |
205-8579 Wiring Gp-Platform
| 20***79 | Wiring Group-Platform | 1 |
| 20***26 | Slip Joint Group | 1 |
| 21***85 | Bushing As | 3 |
257-4183 Wiring Gp-Unit Injector
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 18 |
| 10***33 | Carrier-Planetary | 1 |
| 10***36 | Retainer | 1 |
Engine Arrangement
231-3468 Engine Ar-Complete
| 10***78 | Pan Group-Oil; -Engine | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
| 11***55 | Lifting Group-Engine; (Front) | 1 |
205-8603 Engine Ar-Complete
| 10***82 | Fastener Group-Front Housing | 1 |
| 11***55 | Lifting Group-Engine; (Front) | 1 |
| 12***31 | Connection Group-Electrical; (Cylinder Block Ground) | 1 |
280-2166 Engine Ar-Core
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 20***49 | Gear Group-Front | 1 |
| 22***41 | Piston & Rod Group | 6 |
241-5933 Engine Ar-Core
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 14***82 | Mechanism Group-Fuel Pump & Valve | 1 |
| 19***09 | Mechanism Group-Fuel Pump & Valve | 1 |
205-8604 Installation Ar-Engine
| 20***09 | Mounting Group-Engine | 1 |
| 20***87 | Alternator Group-Charging | 1 |
| 20***88 | Air Cleaner Group | 1 |
Frame And Body
211-5067 Bar Ar-Striker
| 10***86 | Valve As-Drain; (Ecology) | 1 |
| 10***87 | Plug-Drain; (Power Train Oil Tank) | 1 |
| 16***80 | Plug As. | 2 |
245-3830 Bar Ar-Striker
| 1K***15 | Bolt; (1 1/4unc X 11) | 4 |
| 24***30 | Bar Ar-Striker | 1 |
| 3K***89 | Locknut; (5/8-11-Thd) | 1 |
4z-0654 Bar As-Striker -Trash
| 18***60 | Plate | 1 |
| 4Z***54 | Bar As-Striker; -Trash | 1 |
| 7X***30 | Bolt-Plt; (1 1/4unc X 5 1/2) | 8 |
221-9665 Bar As-Striker -Rear
| 11***58 | Plate As | 1 |
| 22***65 | Bar As-Striker; -Rear | 1 |
| 2D***35 | Locknut (Visor To Bracket) | 2 |
4z-0663 Bar As-Striker -Trash
| 1D***45 | Bolt (6.50" Long) | 2 |
| 21***54 | Plate | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 2 |
4z-0569 Bar As-Striker -Trash
| 03***12 | Bolt | 4 |
| 4Z***69 | Bar As-Striker; -Trash | 1 |
| 6T***88 | Plate | 2 |
224-4644 Bar Gp-Striker -Front
| 22***44 | Bar Group-Striker; -Front | 1 |
| 6P***01 | Cover | 2 |
| 7X***03 | Capscrew; (1-7 Unc X 2.25 Gr8) | 12 |
236-2245 Case & Frame Gp -Cushion Dozer
| 21***18 | Door As; (Rh) | 1 |
| 23***45 | Case & Frame Group; -Cushion Dozer | 1 |
| 3B***05 | Pin Split Cotter | 1 |
205-8632 Case & Frame Gp
| 20***32 | Case & Frame Group | 1 |
| 21***17 | Door As; (Lh) | 1 |
| 3B***05 | Pin Split Cotter | 1 |
8e-9052 Counterweight Gp
| 21***20 | Door As; (Rh) | 1 |
| 3B***05 | Pin Split Cotter | 1 |
| 3V***99 | Rod As; (Each Includes) | 1 |
8e-9051 Counterweight Gp
| 21***19 | Door As; (Lh) | 1 |
| 3B***05 | Pin Split Cotter | 1 |
| 3V***99 | Rod As; (Each Includes) | 1 |
215-2955 Counterweight Gp
| 21***52 | Plate As; (Rh) | 1 |
| 21***54 | Plate As; (Rh) | 1 |
| 21***61 | Plate As; (Rh) | 1 |
188-2526 Counterweight Gp
| 18***26 | Counterweight Group | 1 |
| 1H***06 | Pin As-Drawbar | 1 |
| 2H***37 | Bolt; (1-1/4-7x6-In) | 6 |
307-6269 Cover Gp-Hood
| 21***53 | Plate As; (Lh) | 1 |
| 21***55 | Plate As; (Lh) | 1 |
| 21***60 | Plate As; (Lh) | 1 |
7t-6040 Cover Gp-Trunnion
| 21***52 | Plate As; (Rh) | 1 |
| 21***54 | Plate As; (Rh) | 1 |
| 21***61 | Plate As; (Rh) | 1 |
210-1686 Door Gp-Access -Rh-Sound Suppression
| 03***35 | Bolt 38.10 mm(1.50 In.)Long | 8 |
| 05***45 | Bracket | 2 |
| 05***46 | Spring | 1 |
210-1669 Door Gp-Access -Rh
| 21***52 | Plate As; (Rh) | 1 |
| 21***54 | Plate As; (Rh) | 1 |
| 21***61 | Plate As; (Rh) | 1 |
210-1668 Door Gp-Access -Lh
| 21***53 | Plate As; (Lh) | 1 |
| 21***55 | Plate As; (Lh) | 1 |
| 21***60 | Plate As; (Lh) | 1 |
210-1684 Door Gp-Access -Lh-Sound Suppression
| 21***53 | Plate As; (Lh) | 1 |
| 21***55 | Plate As; (Lh) | 1 |
| 21***60 | Plate As; (Lh) | 1 |
7t-3896 Drawbar Gp
| 03***35 | Bolt 38.10 mm(1.50 In.)Long | 8 |
| 05***45 | Bracket | 2 |
| 05***46 | Spring | 1 |
248-4761 Enclosure Gp -Rh
| 24***17 | Guard As | 1 |
| 24***61 | Enclosure Group; -Rh | 1 |
| 26***92 | Enclosure Group; -Rh-Waste Handling | 1 |
248-5522 Enclosure Gp -Rh-Sound Suppression
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 21***43 | Plate | 1 |
| 21***44 | Cover As | 1 |
248-4763 Enclosure Gp -Lh
| 10***71 | Plate | 1 |
| 10***73 | Plate | 1 |
| 1F***50 | Nut Rops Support | 1 |
260-2992 Enclosure Gp -Rh-Waste Handling
| 21***49 | Fender As; (Rh) | 1 |
| 22***32 | Plate; (Rh) | 1 |
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 15 |
260-2993 Enclosure Gp -Lh-Waste Handling
| 12***24 | Pawl | 1 |
| 26***93 | Enclosure Group; -Lh-Waste Handling | 1 |
| 27***54 | Cover As | 1 |
248-5527 Enclosure Gp -Lh-Sound Suppression
| 21***48 | Fender As; (Lh) | 1 |
| 22***33 | Plate; (Lh) | 1 |
| 23***10 | Plate | 1 |
210-1681 Enclosure Gp-Engine -Sound Suppression
| 21***81 | Enclosure Group-Engine; -Sound Suppression | 1 |
| 21***14 | Gasket | 1 |
| 30***57 | Floorplate As | 1 |
215-5599 Enclosure Gp-Engine
| 21***99 | Enclosure Group-Engine | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 4T***51 | Bearing-Sleeve | 4 |
242-9355 Enclosure Gp-Engine -Waste Handling
| 21***27 | Frame As | 1 |
| 24***55 | Enclosure Group-Engine; -Waste Handling | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
210-1689 Enclosure Gp-Rear
| 19***47 | Drive Group-Final; -Waste Handling | 2 |
| 21***89 | Enclosure Group-Rear | 1 |
231-9286 Fender Gp -Lh
| 1J***29 | Bolt-Plt; (1unc X 6) | 12 |
| 20***36 | Cover | 1 |
| 21***29 | Guard As | 1 |
231-9287 Fender Gp -Rh
| 1J***29 | Bolt-Plt; (1unc X 6) | 2 |
| 21***72 | Guard As | 1 |
| 23***87 | Fender Group; -Rh | 1 |
205-8570 Fender Gp
| 20***70 | Fender Group | 1 |
| 28***32 | Drive Group-Final | 2 |
301-1460 Floorplate Gp -Quick Opening
| 15***55 | Seal; (34-cm) | 0 |
| 1J***29 | Bolt-Plt; (1unc X 6) | 12 |
| 1Q***42 | Guard As | 1 |
301-3131 Floorplate Gp -Quick Opening
| 1S***20 | Clip (1.50" Long); Clip-Hose As. To Frame | 1 |
| 20***89 | Bracket Assem. | 1 |
| 21***71 | Guard As-Fan | 2 |
4z-9484 Frame & Bearing As -Trash-Single Shank Ripper
| 21***35 | Guard As | 2 |
| 21***38 | Guard | 1 |
| 4Z***84 | Frame & Bearing As; -Trash-Single Shank Ripper | 1 |
200-2434 Frame & Bearing As -Trash-Multishank Ripper
| 18***41 | Guard | 4 |
| 18***63 | Spacer | 4 |
| 18***42 | Cover | 4 |
285-0161 Guard Ar-Final Drive
| 1Q***26 | Retainer | 2 |
| 1Q***27 | Guard | 2 |
| 28***61 | Guard Ar-Final Drive | 1 |
188-0532 Guard Ar-Final Drive -Waste Handler
| 18***32 | Guard Ar-Final Drive; -Waste Handling | 1 |
| 23***37 | Guard As; (Rh) | 1 |
| 23***38 | Guard As; (Lh) | 1 |
211-5080 Guard Gp-Bottom
| 11***94 | Strap | 1 |
| 20***58 | Plate | 1 |
| 20***59 | Plate | 1 |
243-2742 Guard Gp-Bottom -Waste Handler
| 10***93 | Pin | 2 |
| 19***72 | Plug | 2 |
| 20***74 | Guard As | 1 |
210-8373 Guard Gp-Bottom
| 11***94 | Plate | 1 |
| 11***95 | Guard As | 1 |
| 11***97 | Bracket As | 2 |
260-8754 Guard Gp-Brush
| 20***92 | Bolt-Flange Head | 2 |
| 24***33 | Boss | 2 |
| 26***54 | Guard Group-Brush | 1 |
205-8571 Guard Gp-Drive Shaft
| 10***48 | Guard As-Center | 1 |
| 10***51 | Guard As-Rh | 1 |
| 10***57 | Guard As-Lh | 1 |
190-8429 Guard Gp-Final Drive
| 10***48 | Guard As-Center | 1 |
| 11***17 | Guard As-Rh | 1 |
| 11***18 | Guard As-Lh | 1 |
223-9054 Guard Gp-Fuel Tank
| 1K***72 | Locknut Horn To Guard | 6 |
| 20***81 | Ring | 2 |
| 20***82 | Guard-Seal | 2 |
1z-0749 Guard Gp-Pivot Shaft
| 1Z***49 | Guard Group-Pivot Shaft | 1 |
| 6H***56 | Roll Pin--Lever To Compression Release Control Shaft | 1 |
| 7X***66 | Spring-Latch | 1 |
213-1116 Guard Gp-Power Train -Rear
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 17***57 | Panel As | 1 |
| 21***16 | Guard Group-Power Train; -Rear | 1 |
241-4104 Guard Gp-Power Train
| 11***58 | Plate As | 1 |
| 12***23 | Seal; (32-cm) | 0 |
| 13***02 | Seal; (23-cm Each) | 0 |
204-9876 Guard Gp-Radiator
| 11***58 | Plate As | 1 |
| 12***23 | Seal; (32-cm) | 0 |
| 13***02 | Seal; (23-cm Each) | 0 |
307-4554 Guard Gp-Radiator
| 11***71 | Guard As; (Rh) | 1 |
| 11***73 | Guard As; (Lh) | 1 |
| 11***55 | Step As | 2 |
113-6041 Guard Gp-Rock -Universal
| 11***41 | Guard Group-Rock; -Universal | 1 |
| 11***13 | Bearing-Self-Aligning | 2 |
| 11***15 | Bearing-Sleeve | 2 |
102-1937 Guard Gp-Rock -Semi-Universal
| 10***37 | Guard Group-Rock; -Semi-Universal | 1 |
| 11***13 | Bearing-Self-Aligning | 2 |
| 11***15 | Bearing-Sleeve | 2 |
203-9380 Guard Gp-Seal -Pivot Shaft
| 11***55 | Equalizer Bar | 1 |
| 11***13 | Bearing-Self-Aligning | 2 |
| 11***15 | Bearing-Sleeve | 2 |
8y-6400 Latch Gp
| 17***51 | Bar Group-Equalizer | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 4 |
| 2H***45 | Bolt -Generator To Base | 2 |
174-3874 Panel Gp-Sound Suppression
| 11***13 | Bearing-Self-Aligning | 2 |
| 11***15 | Bearing-Sleeve | 2 |
| 13***31 | Plug | 2 |
243-4311 Seal Gp-Waste Handling
| 14***99 | Bar Group-Equalizer; -Roller Frame, Straight | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 4 |
| 24***11 | Seal Group-Waste Handling | 1 |
211-5068 Step Gp -Heavy Duty
| 1T***68 | Pin (.188" Diameter) | 1 |
| 21***68 | Step Group; -Heavy Duty | 1 |
| 30***45 | Cap As-Track Idler | 1 |
Fuel System
236-5178 Adapter Gp-Fast Fill Fuel
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 6 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 16***55 | Valve As-Shutoff; (Fast Fill Fuel) | 1 |
236-5177 Adapter Gp-Fast Fill Fuel
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 6 |
| 11***15 | Clamp | 1 |
| 11***16 | Clamp As | 1 |
236-5179 Adapter Gp-Fast Fill Fuel
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 6 |
| 12***86 | Plate As | 1 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
236-5180 Adapter Gp-Fast Fill Fuel
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 6 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 16***55 | Valve As-Shutoff; (Fast Fill Fuel) | 1 |
207-4802 Filter & Lines Gp-Fuel
| 03***79 | Nipple; (Hose) | 1 |
| 10***36 | Clip | 1 |
| 12***19 | Bracket Assem. | 1 |
173-9749 Filter Gp-Secondary Fuel
| 16***38 | Base As-Fuel Filter | 1 |
| 17***49 | Filter Group-Secondary Fuel; -Secondary | 1 |
| 1R***49 | Filter-Fuel; (Advanced Efficiency)(Secondary) | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
249-7174 Kit-Seal -Link
| 20***45 | Seal As; (Link) | 94 |
| 24***74 | Kit-Seal; -Link | 1 |
229-1497 Lines Gp-Fuel
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
174-7464 Mounting Gp-Fuel Line
| 17***64 | Mounting Group-Fuel Line | 1 |
| 9G***40 | Spacer; (10.5x25x15-mm Thk) | 1 |
| 9R***33 | Boss | 2 |
150-4279 Pump & Mtg Gp-Fuel Transfer -Rear
| 0S***99 | Stud (1.4325" Long) | 2 |
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 2 |
| 13***16 | Cover | 1 |
235-1402 Pump Gp-Fuel Injection
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
211-0681 Tank Gp-Fuel
| 16***17 | Cover | 1 |
| 18***79 | Cover | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
242-3370 Tank Gp-Fuel -Waste Handling
| 24***01 | Washer; (22x82.55x11-mm Thk) | 4 |
| 24***70 | Tank Group-Fuel; -Waste Handling | 1 |
| 24***83 | Tank Group-Fuel; -Waste Handling | 1 |
205-8577 Tank Gp-Fuel
| 20***77 | Tank Group-Fuel | 1 |
| 21***81 | Tank Group-Fuel | 1 |
| 24***01 | Washer; (22x82.55x11-mm Thk) | 4 |
242-3383 Tank Gp-Fuel -Waste Handling
| 16***17 | Cover | 1 |
| 18***79 | Cover | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
281-2725 Valve Gp-Check -Fuel
Hydraulic System
179-9387 Accumulator Gp-Pilot Oil -Uncharged
| 12***35 | Valve As-Control | 1 |
| 17***87 | Accumulator Group-Pilot Oil; -Uncharged-Dead Engine Lower, Arch, Boom | 1 |
| 20***53 | Core As-Oil Cooler; (Hydraulic) | 1 |
351-0320 Accumulator Gp-Pilot Oil -Uncharged
| 15***51 | Connector Assem. | 1 |
| 16***23 | Tube As; (Lh) | 1 |
| 16***33 | Cylinder Group-Bulldozer Lift | 1 |
200-0750 Accumulator Gp-Pilot Oil -Charged
| 12***35 | Valve As-Control | 1 |
| 20***50 | Accumulator Group-Pilot Oil; -Charged | 1 |
| 28***90 | Core As-Oil Cooler; (Hydraulic) | 1 |
205-8607 Control Ar-Dual Tilt
| 15***51 | Connector Assem. | 1 |
| 16***23 | Tube As; (Lh) | 1 |
| 16***33 | Cylinder Group-Bulldozer Lift | 1 |
208-1607 Control Ar-Hyd Pin Puller
| 15***51 | Connector Assem. | 1 |
| 16***23 | Tube As; (Lh) | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
254-7393 Control Ar-Hydraulic -Auto Carry
| 10***17 | Washer; (36.7x77x6-mm Thk) | 1 |
| 13***84 | Ring-Wear | 1 |
| 13***23 | Piston As | 1 |
205-8636 Control Ar-Hydraulic -Winch
| 10***32 | Cylinder Group-Tilt; -Rh | 1 |
| 10***33 | Cylinder Group-Tilt; -Lh | 1 |
| 20***36 | Control Ar-Hydraulic; -Winch | 1 |
205-8612 Control Ar-Hydraulic -Ripper
| 14***74 | Hose As; (Arctic) | 2 |
| 14***76 | Hose As; (Arctic) | 2 |
| 14***77 | Hose As; (Arctic) | 1 |
205-8590 Cooler & Mtg Gp-Hydraulic Oil
| 11***55 | Washer; (57.3x100x6.35-mm Thk) | 2 |
| 13***21 | Cylinder As | 1 |
| 13***22 | Head | 1 |
236-5216 Cylinder & Lines Gp-Lift -Rh-Bulldozer
| 13***46 | Cylinder As | 1 |
| 13***47 | Head | 1 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 4 |
204-7462 Cylinder & Lines Gp-Lift -Rh-Bulldozer
| 11***55 | Washer; (57.3x100x6.35-mm Thk) | 2 |
| 13***21 | Cylinder As | 1 |
| 13***22 | Head | 1 |
204-7463 Cylinder & Lines Gp-Lift -Lh-Bulldozer
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
211-5059 Cylinder & Lines Gp-Ripper -Cold Weather
| 10***79 | Head | 1 |
| 10***81 | Piston | 1 |
| 10***83 | Cylinder As | 1 |
246-1026 Cylinder Ar-Tilt
| 10***79 | Head | 1 |
| 10***81 | Piston | 1 |
| 10***83 | Cylinder As | 1 |
165-8633 Cylinder Gp-Bulldozer Lift
| 10***70 | Insert | 2 |
| 10***79 | Head | 1 |
| 10***84 | Lug | 4 |
225-6727 Cylinder Gp-Bulldozer Lift
| 10***70 | Insert | 2 |
| 10***79 | Head | 1 |
| 10***84 | Lug | 3 |
132-5123 Cylinder Gp-Ripper -Raise, Lower
| 13***23 | Cylinder Group-Ripper; (Raise, Lower) | 1 |
| 13***28 | Hose As | 2 |
| 13***30 | Hose As | 1 |
4z-6363 Cylinder Gp-Ripper -Cold Weather
| 20***14 | Lines Group-Hydraulic Fan | 1 |
| 20***81 | Lines Group-Lift Cylinder | 1 |
| 20***82 | Lines Group-Pump | 1 |
6e-3113 Cylinder Gp-Ripper Pin Puller
| 12***03 | Hose As; (1100mm Long) | 1 |
| 12***04 | Hose As; (910mm Long) | 1 |
| 1Z***75 | Hose As; (900mm Long) | 1 |
132-5149 Cylinder Gp-Ripper Tip
| 13***49 | Cylinder Group-Ripper Tip | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 19***98 | Connector As | 1 |
4z-6364 Cylinder Gp-Ripper Tip -Cold Weather
109-8832 Cylinder Gp-Tilt -Rh
| 10***32 | Cylinder Group-Tilt; -Rh | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***16 | Reducer As | 1 |
109-8833 Cylinder Gp-Tilt -Lh
| 10***33 | Cylinder Group-Tilt; -Lh | 1 |
| 24***94 | Hose As | 2 |
| 24***95 | Hose As | 1 |
109-6778 Cylinder Gp-Tilt -Stabilizer
| 05***58 | "P" Clip | 1 |
| 10***78 | Cylinder Group-Tilt; -Stabilizer | 1 |
| 11***64 | Hose Assem. | 1 |
4z-6110 Cylinder Gp-Tilt -Semi-Universal Bulldozer
| 05***58 | "P" Clip | 1 |
| 11***64 | Hose Assem. | 1 |
| 12***47 | Valve Group-Bypass; -Power Train Oil Cooler | 1 |
205-8602 Hydraulic Ar
| 13***81 | Hose As | 1 |
| 14***30 | Hose As | 1 |
| 20***02 | Hydraulic Ar | 1 |
195-1174 Lines Gp-Bulldozer -Landfill
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
132-9271 Lines Gp-Bulldozer -Landfill
| 11***26 | Hose As | 1 |
| 13***71 | Lines Group-Bulldozer; -Landfill | 1 |
| 15***16 | Hose As | 1 |
302-8427 Lines Gp-Hydraulic Fan -Reversing Fan
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
204-7414 Lines Gp-Hydraulic Fan
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
208-1597 Lines Gp-Hydraulic Fan -Reversing Fan
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
211-5056 Lines Gp-Lift Cylinder -Cold Weather
| 11***05 | Tube As | 2 |
| 11***07 | Guard | 2 |
| 11***90 | Tube As | 1 |
205-8581 Lines Gp-Lift Cylinder
| 11***27 | Plate-Orifice | 1 |
| 20***81 | Lines Group-Lift Cylinder | 1 |
| 21***91 | Manifold | 1 |
211-5062 Lines Gp-Pin Puller Cylinder -Cold Weather
| 10***25 | Tube As | 2 |
| 10***26 | Tube As | 2 |
| 11***05 | Tube As | 2 |
216-0123 Lines Gp-Pin Puller Cylinder -Single Shank Ripper
| 13***10 | Stud-Taperlock; (M10x1.5x45-mm) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***52 | Union As | 1 |
205-8582 Lines Gp-Pump
| 06***51 | Clamp | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
207-4455 Lines Gp-Ripper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
135-6410 Lines Gp-Ripper
| 13***10 | Lines Group-Ripper | 1 |
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 17***57 | Valve Group-Pressure Reducing; -Implement Pilot Lines | 1 |
204-7440 Lines Gp-Tilt Cylinder -Dual
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 12***94 | Housing | 1 |
| 20***40 | Lines Group-Tilt Cylinder; -Dual | 1 |
8e-9891 Lines Gp-Tilt Cylinder -Dual
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 12***94 | Housing | 1 |
| 24***40 | Valve-Relief | 1 |
8e-9890 Lines Gp-Tilt Cylinder
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 2 |
| 16***05 | Connector As | 1 |
205-8583 Lines Gp-Tilt Cylinder
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 16***48 | Seal-Lip Type | 2 |
| 20***83 | Lines Group-Tilt Cylinder | 1 |
209-2609 Lines Gp-Winch
| 18***67 | Seal-O-Ring | 1 |
| 19***49 | Retainer | 1 |
| 19***24 | Cap | 1 |
223-8531 Manifold Gp-Control -Implement Pump
| 21***97 | Pump Group-Piston; -Rear-Hydraulic Fan | 1 |
| 21***98 | Pump Group-Piston; -Front-Implement | 1 |
| 22***31 | Manifold Group-Control; -Implement Pump | 1 |
311-8508 Manifold Gp-Control
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***79 | Cone-Bearing | 1 |
| 12***27 | Piston-Control | 1 |
229-1466 Manifold Gp-Control -Reversing Fan
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***79 | Cone-Bearing | 1 |
| 12***27 | Piston-Control | 1 |
191-1443 Manifold Gp-Hydraulic -Winch
| 09***42 | Ring-Retaining | 1 |
| 10***14 | Seal-O-Ring | 1 |
| 12***94 | Plug; (Break Off) | 1 |
223-1094 Manifold Gp-Valve
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***79 | Cone-Bearing | 1 |
| 12***27 | Piston-Control | 1 |
214-1099 Motor Gp-Piston -Hydraulic Fan
| 21***98 | Pump Group-Piston; -Front-Implement | 1 |
| 21***99 | Motor Group-Piston; -Hydraulic Fan | 1 |
| 31***95 | Pump Group-Piston; -Hydraulic Fan | 1 |
214-1100 Motor Gp-Piston -Hydraulic Fan
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
| 13***43 | Ring | 1 |
246-1043 Mounting Gp-Cylinder
| 16***79 | Pin | 3 |
| 19***19 | Plate | 1 |
| 19***25 | Plate | 1 |
194-3286 Plug Gp-Control Valve -Pressure, Flow Compensator
| 09***39 | Ring; (Retaining) | 1 |
| 19***85 | Plate-Distributor | 1 |
| 19***87 | Piston As | 9 |
214-1095 Pump Gp-Piston -Implement, Hydraulic Fan
| 13***36 | Filter Element As-Oil; (Ultra High Efficiency)(Transmission) | 1 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 1 |
| 16***58 | Bolt; (M8x1.25x30-mm) | 2 |
319-3595 Pump Gp-Piston -Hydraulic Fan
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***73 | Clip As-Connecting | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
214-1098 Pump Gp-Piston -Front-Implement
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 21***79 | Valve Group-Bank 4; -Bulldozer, Ripper | 1 |
| 21***98 | Pump Group-Piston; -Front-Implement | 1 |
214-1097 Pump Gp-Piston -Rear-Hydraulic Fan
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 21***17 | Valve Group-Bank 4; -Auxiliary, Bulldozer, Winch | 1 |
| 21***97 | Pump Group-Piston; -Rear-Hydraulic Fan | 1 |
319-3596 Pump Gp-Piston -Implement, Hydraulic Fan
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***73 | Clip As-Connecting | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
244-7018 Rotating Gp-Motor -Hydraulic Fan
| 22***13 | Valve As-Relief | 1 |
| 24***18 | Rotating Group-Motor; -Hydraulic Fan | 1 |
196-0227 Rotating Gp-Pump -Hydraulic Fan
| 12***35 | Valve As-Control | 1 |
| 12***48 | Body | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
249-9209 Rotating Gp-Pump -Implement
| 24***09 | Rotating Group-Pump; -Implement | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4T***71 | Ring-Back-Up | 1 |
222-0491 Tank & Filter Gp-Hydraulic
| 12***79 | Kit-Seal; (Check Valve)(Hydraulic Fan, Reversing) | 2 |
| 22***91 | Tank & Filter Group-Hydraulic | 1 |
188-6140 Valve & Mtg Gp-Control -Hydraulic Pin Puller
| 16***54 | Seal-O-Ring | 1 |
| 18***40 | Valve & Mtg Group-Control; -Hydraulic Pin Puller | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
222-7247 Valve & Mtg Gp-Implement Cont
| 16***54 | Seal-O-Ring | 1 |
| 22***47 | Valve & Mtg Group-Implement Cont | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
217-3885 Valve & Mtg Gp-Main Control -Bulldozer, Ripper
| 10***12 | Spring | 1 |
| 10***69 | Stop | 1 |
| 13***72 | Plate | 1 |
211-7817 Valve Gp-Bank 4 -Auxiliary, Bulldozer, Winch
| 10***10 | Valve-Check; (Steering) | 2 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 1 |
214-1079 Valve Gp-Bank 4 -Bulldozer, Ripper
| 10***10 | Valve-Check; (Steering) | 2 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 1 |
249-7168 Valve Gp-Breaker Relief
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
126-0747 Valve Gp-Bypass
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
226-3800 Valve Gp-Check -Implement Pump Oil
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 1 |
128-2780 Valve Gp-Check -Reversing Fan
| 10***10 | Valve-Check; (Steering) | 3 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 2 |
158-9956 Valve Gp-Check -Implement Pump Oil
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 1 |
4t-5896 Valve Gp-Check -Inlet Manifold
| 10***10 | Valve-Check; (Steering) | 3 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 2 |
214-1081 Valve Gp-Control -Bulldozer Tilt
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 03***43 | Seal-O-Ring | 1 |
| 19***28 | Coil As; (12-Vdc) | 1 |
217-4326 Valve Gp-Control -Dual Tilt
| 21***26 | Valve Group-Control; -Dual Tilt | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
214-1083 Valve Gp-Control -Ripper Tip
| 21***83 | Valve Group-Control; -Ripper Tip | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4T***05 | Spring | 1 |
214-1080 Valve Gp-Control -Bulldozer Lift
| 19***07 | Kit-Valve Repair; (Pressure Compensator Valve) | 1 |
| 19***85 | Retainer | 1 |
| 19***86 | Plug Group-Control Valve; -Pressure, Flow Compensator-Steering-Steering Oil Pressure | 1 |
202-2731 Valve Gp-Control -Transmission
| 20***31 | Valve Group-Control; -Transmission | 1 |
| 21***99 | Bolt; (M10x1.5x45-mm) | 4 |
| 21***65 | Cover | 2 |
214-1082 Valve Gp-Control -Ripper Raise-Auxiliary
| 15***46 | Valve Group-Solenoid; -Quick Coupler | 1 |
| 16***48 | Plug As | 3 |
| 17***93 | Plug As | 1 |
170-3357 Valve Gp-Pressure Reducing -Implement Pump Oil
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***57 | Valve | 1 |
| 17***57 | Valve Group-Pressure Reducing; -Implement Pilot Lines | 1 |
194-3899 Valve Gp-Pump Control -Flow Compensator-Implement
| 19***99 | Valve Group-Pump Control; -Flow Compensator-Steering Low Pressure Standby | 1 |
| 24***56 | Kit-Seal; (Shuttle Valve)(Implement Control) | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
318-3129 Valve Gp-Pump Control -Pressure, Flow Compensator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
310-1523 Valve Gp-Pump Control -Pressure, Flow Compensator-Hydraulic Fan
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
176-7520 Valve Gp-Pump Control -Pressure Compensator-Implement
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
217-4327 Valve Gp-Quick-Drop -Blade
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 19***01 | Kit-Seal; (Solenoid Valve) | 1 |
116-1895 Valve Gp-Relief -Ripper Tip
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 11***95 | Valve Group-Relief; -Ripper Tilt | 1 |
121-6649 Valve Gp-Relief -Pilot Oil Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 12***49 | Valve Group-Relief; -Pilot Oil Pressure-Ripper Raise, Lower | 1 |
225-8026 Valve Gp-Relief -Implement Pump Oil
| 22***26 | Valve Group-Relief; -Pilot Manifold Pressure | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4K***39 | Seal-O-Ring | 1 |
6e-4139 Valve Gp-Relief -Inlet Manifold-Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***33 | Coil As; (24-Volt) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
4t-1008 Valve Gp-Relief -Inlet Manifold-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***36 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
260-8590 Valve Gp-Shuttle -Implement Control
| 21***94 | Coil As; (24-Volt) | 1 |
| 26***90 | Valve Group-Shuttle; -Implement Pilot Oil | 1 |
| 35***70 | Cartridge As | 1 |
203-4157 Valve Gp-Solenoid
| 10***64 | Trunnion Group-Bulldozer | 1 |
| 10***65 | Blade Group-Universal | 1 |
| 20***57 | Valve Group-Solenoid; -Hydraulic Lockout | 1 |
257-0267 Valve Gp-Solenoid
| 16***07 | Cap-Bearing | 2 |
| 23***63 | Bearing | 2 |
| 24***40 | Link As | 1 |
3e-8575 Valve Gp-Solenoid
| 31***29 | Coil As | 1 |
| 3E***75 | Valve Group-Solenoid; -Quick Coupler | 1 |
279-6528 Valve Gp-Solenoid
| 11***87 | Lug | 5 |
| 16***07 | Cap-Bearing | 2 |
| 23***63 | Bearing | 2 |
152-8346 Valve Gp-Solenoid
| 10***45 | Blade Group-Semi-Universal | 1 |
| 10***64 | Trunnion Group-Bulldozer | 1 |
| 15***46 | Valve Group-Solenoid; -Quick Coupler | 1 |
3e-9205 Valve Gp-Solenoid
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***14 | Nut; (3/4-32-2b-Thd) | 1 |
| 31***29 | Coil As | 1 |
313-7668 Valve Gp-Solenoid -Lift
| 10***74 | Bracket As; (Rh) | 1 |
| 10***76 | Push Arm As; (Rh) | 1 |
| 11***38 | Cap-Bearing | 1 |
285-5730 Valve Gp-Solenoid
| 10***85 | Push Arm As; (Lh) | 1 |
| 10***06 | Bracket As | 1 |
| 10***75 | Bracket As; (Lh) | 1 |
201-0950 Valve Gp-Solenoid
| 10***45 | Blade Group-Semi-Universal | 1 |
| 10***64 | Trunnion Group-Bulldozer | 1 |
| 20***50 | Valve Group-Solenoid; -Parking Brake | 1 |
152-8340 Valve Gp-Solenoid
| 12***03 | Hose As; (1100mm Long) | 1 |
| 12***04 | Hose As; (910mm Long) | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
Implements
4z-0628 Bulldozer Ar-Semi-Universal
| 10***79 | Eye-Rod | 1 |
| 10***28 | Push Arm Group; -Lh | 1 |
| 10***78 | Cylinder Group-Tilt; -Stabilizer | 1 |
228-1854 Bulldozer Ar-Semi-Universal
| 10***83 | Trunnion As | 2 |
| 11***50 | Retainer | 1 |
| 11***52 | Bearing | 1 |
246-1025 Bulldozer Ar-Semi-Universal
| 10***83 | Trunnion As | 2 |
| 11***50 | Retainer | 1 |
| 11***52 | Bearing | 1 |
228-1853 Bulldozer Ar-Universal
| 11***23 | Spacer; (11.13x19.05x19-mm Thk) | 1 |
| 22***53 | Bulldozer Ar-Universal | 1 |
| 23***45 | Case & Frame Group; -Cushion Dozer | 1 |
246-1024 Bulldozer Ar-Universal
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
246-1039 Link Gp-Stabilizer
| 17***58 | Mount | 1 |
| 18***07 | Screw-Drive; (No 8x1.25-In) | 3 |
| 21***84 | Compressor As | 1 |
246-1041 Link Gp-Stabilizer
| 24***41 | Link Group-Stabilizer | 1 |
108-1028 Push Arm Gp -Lh
| 10***27 | Condenser Group-Refrigerant; -With Fans-Rops Mounted-Remote Mounted | 1 |
| 10***28 | Push Arm Group; -Lh | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
110-5744 Push Arm Gp -Rh
| 10***27 | Condenser Group-Refrigerant; -With Fans-Rops Mounted-Remote Mounted | 1 |
| 11***44 | Push Arm Group; -Rh | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
246-1045 Push Arm Gp-Stabilizer
| 17***66 | Hinge Assem. | 1 |
| 20***57 | Door-Front | 1 |
| 21***15 | Latch | 1 |
205-7249 Trunnion Gp-Bulldozer
| 18***40 | Link | 1 |
| 20***49 | Trunnion Group-Bulldozer | 1 |
| 24***50 | Bracket As | 1 |
106-7364 Trunnion Gp-Bulldozer
| 10***64 | Trunnion Group-Bulldozer | 1 |
| 18***40 | Link | 1 |
| 24***59 | Bracket As | 1 |
241-3360 Trunnion Gp-Bulldozer -Cushion Dozer
| 24***60 | Trunnion Group-Bulldozer; -Cushion Dozer | 1 |
| 25***12 | Bracket As; (Left) | 1 |
| 25***13 | Bracket As; (Right) | 1 |
Lubrication System
316-6817 Body As-Oil Pump
| 18***71 | Bearing-Sleeve | 1 |
| 1M***80 | Bearing; (25.413 mm Od) | 1 |
| 20***92 | Bearing-Sleeve | 1 |
234-2916 Breather Gp -Crankcase
| 16***66 | Breather As; (Crankcase) | 1 |
| 23***16 | Breather Group; -Crankcase-Valve Mechanism | 1 |
| 2N***09 | Clamp; (V-Band) | 1 |
286-8210 Breather Gp
| 23***16 | Breather Group; -Crankcase-Valve Mechanism | 1 |
| 28***10 | Breather Group | 1 |
4n-2481 Fastener Gp-Oil Pump Mounting -Engine
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 4N***81 | Fastener Group-Oil Pump Mounting; Oil Pump Mounting Fastener Group | 1 |
220-6374 Filler Gp-Engine Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 3 |
220-6371 Filter Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
206-7371 Fumes Disposal Gp
| 20***71 | Fumes Disposal Group | 1 |
| 22***62 | Tube | 1 |
| 22***63 | Tube | 1 |
220-6367 Gauge Gp-Oil Level (Dipstick) -Engine
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
4n-4771 Lines Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
225-4126 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
220-6377 Mounting Gp-Fumes Disposal
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 21***61 | Bracket As | 1 |
| 22***77 | Mounting Group-Fumes Disposal | 1 |
220-7185 Oil Change Gp-High Speed
| 11***79 | Hose As | 1 |
| 11***18 | Cap-Dust | 1 |
| 11***19 | Coupler-Male | 1 |
230-4090 Prelubrication Ar-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***50 | Valve-Check | 1 |
| 12***00 | Plate As; (3/8-16) | 1 |
228-8553 Pump & Motor Gp-Prelubrication
| 18***67 | Motor Group-Electric; (Secondary Steering) | 1 |
| 18***70 | Relay; (Secondary Steering Motor), Washer, Washer; Din 7989 | 1 |
| 18***71 | Power Cable | 1 |
198-1508 Pump Gp-Engine Oil
| 16***79 | Shaft As-Pump | 1 |
| 16***82 | Shaft As-Pump | 1 |
| 19***08 | Pump Group-Engine Oil | 1 |
Machine Arrangement
205-8601 Chassis Ar
| 13***78 | Lighting Group-Flood; -Fender, Front, Rear-Fender, Front | 1 |
| 20***76 | Guard Group-Radiator | 1 |
| 20***70 | Fender Group | 1 |
211-5087 Cold Weather Ar
| 12***40 | Roller & Idler Ar; -Cold Weather | 1 |
| 17***23 | Bar As-Equalizer; -Cold Weather | 1 |
| 18***49 | Drive Group-Final; -Cold Weather | 2 |
258-4811 Cold Weather Ar -Bogie Pin
| 25***11 | Cold Weather Ar; -Bogie Pin | 1 |
| 26***52 | Pin As-Cartridge; (Cold Weather) | 32 |
| 6Y***73 | Plug; (Clear) | 2 |
205-8600 General Ar
| 20***00 | General Ar | 1 |
| 20***01 | Chassis Ar | 1 |
| 20***02 | Hydraulic Ar | 1 |
211-5077 Mining Ar
| 21***68 | Step Group; -Heavy Duty | 1 |
| 21***77 | Mining Ar | 1 |
| 21***79 | Roller Ar-Track | 1 |
211-5069 Modification Ar-Woodchip
| 20***97 | Lines Group-Hydraulic Fan; -Reversing Fan | 1 |
| 21***53 | Precleaner Ar; -With Screen | 1 |
| 21***69 | Modification Ar-Woodchip | 1 |
211-5072 Stockpile Ar
| 21***53 | Precleaner Ar; -With Screen | 1 |
| 21***72 | Stockpile Ar | 1 |
| 21***80 | Guard Group-Bottom | 1 |
211-5088 Waste Handling Ar
| 10***96 | Film-Waste Handler | 2 |
| 1Z***49 | Guard Group-Pivot Shaft | 1 |
| 1Z***78 | Bar | 2 |
211-5065 Waste Handling Ar
| 18***32 | Guard Ar-Final Drive; -Waste Handling | 1 |
| 18***59 | Frame As-Front | 2 |
| 19***74 | Lines Group-Bulldozer; -Landfill | 1 |
Operator Station
173-1028 Adjuster Gp-Seat
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
| 24***56 | Bracket | 1 |
| 7G***24 | Strap | 1 |
237-3970 Air Compressor Gp-Seat
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 21***25 | Liner Group-Cab | 1 |
| 21***60 | Installation Group-Radio | 1 |
214-0783 Air Compressor Gp-Seat -Heavy-Duty
| 20***92 | Cover Group-Cab | 1 |
| 21***00 | Cab Ar | 1 |
| 21***83 | Air Compressor Group-Seat; -Heavy-Duty | 1 |
205-8630 Air Conditioner Ar -Rops Mounted Condenser
| 20***30 | Air Conditioner Ar; -Rops Mounted Condenser | 1 |
| 24***20 | Precleaner Group; -Cab Air | 1 |
| 28***88 | Cab Ar; -Dual Pane Glass | 1 |
205-8638 Air Conditioner Ar -Fender Mounted Condenser
| 20***38 | Air Conditioner Ar; -Fender Mounted Condenser | 1 |
| 24***20 | Precleaner Group; -Cab Air | 1 |
| 29***10 | Cab Ar; -40-Psi Glass | 1 |
214-4176 Box Gp-Storage
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 21***25 | Liner Group-Cab | 1 |
| 21***60 | Installation Group-Radio | 1 |
261-3768 Bracket Gp-Mounting -First Aid Kit
| 13***79 | Washer; (11x32x3-mm Thk) | 8 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 6 |
| 21***08 | Handhold | 2 |
245-4196 Bracket Gp-Mounting -Accugrade
| 11***24 | Button | 18 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 3 |
| 20***48 | Insert-Threaded; (M6x1-Thd) | 4 |
245-4146 Bracket Gp-Mounting -Mast
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 21***25 | Liner Group-Cab | 1 |
| 21***60 | Installation Group-Radio | 1 |
254-9317 Bracket Gp-Mounting -Cab Door
| 13***79 | Washer; (11x32x3-mm Thk) | 8 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 6 |
| 21***01 | Glass; (Tinted) | 1 |
295-0710 Cab Ar -40-Psi Glass
| 09***24 | Plug-Button | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 21***76 | Box Group-Storage | 1 |
205-8640 Cab Ar
| 20***40 | Cab Ar | 1 |
| 24***39 | Mirror Group-Rear View; -Cab | 2 |
286-9188 Cab Ar -Dual Pane Glass
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***90 | Harness As-Heater & Air Cond; (Condenser Blower Motors) | 1 |
248-4172 Cab Ar -40-Psi Glass
| 17***78 | Belt-Serpentine; (Air Conditioner) | 1 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 24***72 | Cab Ar; -40-Psi Glass | 1 |
248-4171 Cab Ar -Dual Pane Glass
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 24***71 | Cab Ar; -Dual Pane Glass | 1 |
213-1100 Cab Ar
| 21***00 | Cab Ar | 1 |
| 24***39 | Mirror Group-Rear View; -Cab | 2 |
| 32***56 | Camera Ar | 1 |
248-4178 Cab Gp -Dual Pane Glass
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***72 | Setscrew-Hex Socket; (M5x0.8x20-mm) | 1 |
214-1800 Cab Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 5 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 15***79 | Nut; (U-Type Retainer) | 12 |
312-3494 Camera & Mirror Ar
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***72 | Setscrew-Hex Socket; (M5x0.8x20-mm) | 1 |
312-3495 Camera & Mirror Ar
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***72 | Setscrew-Hex Socket; (M5x0.8x20-mm) | 1 |
183-5106 Compressor Gp-Refrigerant
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
228-9023 Compressor Gp-Refrigerant
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 3 |
| 16***87 | Lever-Trigger; (Joystick) | 1 |
| 16***89 | Plate; (Switch) | 1 |
103-9527 Condenser Gp-Refrigerant -With Fans-Air Conditioner
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***27 | Condenser Group-Refrigerant; -With Fans-Rops Mounted-Remote Mounted | 1 |
| 11***58 | Bearing | 2 |
214-2014 Console Gp-Front
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 3 |
| 21***14 | Console Group-Front | 1 |
| 21***36 | Sleeve; (36-cm) | 0 |
209-5154 Console Gp-Operator
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 3 |
| 16***87 | Lever-Trigger; (Joystick) | 1 |
| 16***89 | Plate; (Switch) | 1 |
263-3318 Control & Mtg Gp-Pedal -Governor, Brake
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 4 |
| 16***78 | Switch As-Push Button; (Implement) | 1 |
232-6622 Control & Mtg Gp-Pedal -Governor, Brake
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 3 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
337-6855 Control Gp-Handle
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 12 |
319-1858 Control Gp-Handle
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 23 |
337-6853 Control Gp-Handle
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 16 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***65 | Screw; (8-16x0.63-In) | 1 |
240-7837 Control Gp-Handle -Bulldozer Control
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 12 |
| 17***29 | Boot | 1 |
| 18***79 | Control Group-Handle; -Bulldozer Control | 1 |
259-5746 Control Gp-Handle -Bulldozer
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 12 |
259-5747 Control Gp-Handle -Bulldozer, Implement
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***65 | Screw-Pan Head; (4-20x0.5-In) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
208-6070 Control Gp-Handle -Bulldozer Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
222-1546 Control Gp-Handle -Steering, Transmission
| 15***77 | Washer; (4.445x9.525x1.092-mm Thk) | 12 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***29 | Boot | 1 |
259-5751 Control Gp-Handle -Bulldozer
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 23 |
309-9542 Control Gp-Handle -Bulldozer, Dual Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 23 |
188-1079 Control Gp-Handle -Bulldozer Control
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***58 | Bearing | 2 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 3 |
327-3550 Control Gp-Joystick -Bulldozer, Implement
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 21***70 | Plate | 1 |
| 21***02 | Glass | 1 |
208-6072 Control Gp-Joystick -Bulldozer
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 2 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
242-6208 Control Gp-Joystick -Bulldozer, Dual Tilt
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***58 | Bearing | 4 |
242-6207 Control Gp-Joystick -Bulldozer
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 17 |
269-9388 Control Gp-Joystick -Winch
| 17***77 | Rod-Threaded | 2 |
| 23***60 | Control Group-Steer Clutch & Brk | 1 |
| 26***88 | Control Group-Joystick; -Winch | 1 |
242-6209 Control Gp-Joystick -Grade Control, Auto Carry
| 23***49 | Cover | 1 |
| 23***52 | Plate As | 1 |
| 23***54 | Plate | 1 |
327-3542 Control Gp-Joystick -Bulldozer
| 23***09 | Receptacle As-Connector; (4-Pin) | 1 |
| 32***42 | Control Group-Joystick; -Bulldozer, Single Tilt | 1 |
| 8T***37 | Plug-Seal; (40 Pin Connector) | 1 |
208-6075 Control Gp-Joystick -Winch
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***65 | Screw-Pan Head; (4-20x0.5-In) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
208-6074 Control Gp-Joystick -Bulldozer
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 2 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
314-7612 Control Gp-Joystick -Bulldozer, Dual Tilt
| 13***42 | Screw; (M10x1.5x64-mm) | 2 |
| 19***05 | Ashtray | 1 |
| 20***63 | Floor Mat-Lower; (Cab) | 1 |
319-1859 Control Gp-Joystick -Bulldozer
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 19***31 | Adapter; (Compact) | 1 |
| 24***16 | Display Group-Monitor; (Cd700) | 1 |
327-3548 Control Gp-Joystick -Bulldozer, Dual Tilt
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 21***70 | Plate | 1 |
| 21***02 | Glass | 1 |
247-0747 Control Gp-Joystick -Bulldozer
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***58 | Bearing | 2 |
226-7420 Control Gp-Ripper
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 21***70 | Plate | 1 |
| 22***20 | Control Group-Ripper | 1 |
237-0160 Control Gp-Steer Clutch & Brk
| 11***24 | Button | 6 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 21***70 | Plate | 1 |
242-5198 Control Gp-Steering
| 11***24 | Button | 6 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 21***70 | Plate | 1 |
209-5192 Cover Gp-Cab
| 15***66 | Valve | 1 |
| 20***92 | Cover Group-Cab | 1 |
| 23***67 | Filter Element As-Air; (Primary) | 1 |
286-9124 Display Gp-Monitor -Light Bar
| 1F***50 | Nut Rops Support | 1 |
| 20***17 | Filter Element-Cab Air; (Standard Efficiency)(Recirculation) | 1 |
| 21***98 | Plate As | 1 |
286-0134 Display Gp-Monitor -Cd700
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***66 | Latch As | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 9 |
304-8557 Door Gp-Cab -Rh-40-Psi Glass
| 10***38 | Bracket Assem. | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 21***33 | Film-Notice; (Radio) | 1 |
255-6900 Door Gp-Cab -Lh
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
304-8558 Door Gp-Cab -Lh-40-Psi Glass
| 11***24 | Button | 34 |
| 22***24 | Glass-Front | 1 |
| 22***25 | Glass-Cab; (Door) | 2 |
286-9193 Door Gp-Cab -Lh-Dual Pane Glass
| 15***05 | Elbow | 1 |
| 20***17 | Filter Element-Cab Air; (Standard Efficiency)(Recirculation) | 1 |
| 21***98 | Plate As | 1 |
255-6899 Door Gp-Cab -Rh
| 20***45 | Heater Group-Cab | 1 |
| 25***99 | Door Group-Cab; -Rh | 1 |
| 26***51 | Plate As | 1 |
286-9194 Door Gp-Cab -Rh-Dual Pane Glass
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
308-0857 Filter Gp-Cab Air -High Efficiency
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 18 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 14***69 | Washer; (7.5x40x3-mm Thk) | 2 |
298-2660 Heater Gp-Cab
| 29***60 | Heater Group-Cab | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
263-3279 Heater Gp-Cab
| 03***24 | Elbow | 1 |
| 14***11 | Adapter Group | 1 |
| 15***21 | Adapter As | 1 |
205-3645 Heater Gp-Cab
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
206-8637 Heater Gp-Cab
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
308-5197 Heater Gp-Cab
| 23***11 | Plate As | 1 |
| 30***97 | Heater Group-Cab | 1 |
| 5P***48 | Grommet Wires To Plate; Grommet-Wires To Plate | 2 |
174-2231 Housing Gp-Seat Suspension
| 17***31 | Housing Group-Seat Suspension | 1 |
| 25***30 | Bracket As | 1 |
| 6V***56 | Mirror | 1 |
214-1760 Installation Gp-Radio
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***56 | Locknut; (M6x1-Thd) | 6 |
| 21***60 | Installation Group-Radio | 1 |
313-4095 Kit-Window -40-Psi
| 27***06 | Plate As | 2 |
| 31***95 | Kit-Window; -40-Psi | 1 |
| 8T***79 | Bolt; (M12x1.75x20mm)(To Turbocharder-Mounting Face) | 4 |
212-8725 Liner Gp-Cab
| 21***25 | Liner Group-Cab | 1 |
| 23***91 | Plate | 1 |
| 24***44 | Seal | 1 |
205-8639 Lines Gp-Air Conditioner -Condenser, Fender Mounted
| 14***80 | Bracket-Mounting | 1 |
| 16***10 | Bracket As | 1 |
| 20***39 | Lines Group-Air Conditioner; -Condenser, Fender Mounted | 1 |
205-8631 Lines Gp-Air Conditioner -Rops Mounted Condenser
| 20***02 | Washer-Hard; (4.45x9.52x1-mm Thk) | 4 |
| 20***31 | Lines Group-Air Conditioner; -Rops Mounted Condenser | 1 |
| 21***15 | Latch | 1 |
205-8634 Lines Gp-Heater
| 13***14 | Spacer; (6.9x11x40-mm Thk) | 2 |
| 20***34 | Lines Group-Heater | 1 |
| 27***95 | Bracket | 1 |
248-2939 Mirror Gp-Rear View -Cab
| 1Q***83 | Plate As | 2 |
| 24***39 | Mirror Group-Rear View; -Cab | 1 |
| 25***14 | Floorplate As | 1 |
231-3510 Mirror Gp-Rear View -Exterior, Lift Cylinder Mounted
| 17***77 | Rod-Threaded | 2 |
| 1F***50 | Nut Rops Support | 6 |
| 1Q***83 | Plate As | 2 |
105-9659 Mirror Gp-Rear View
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 20***95 | Support As-Rops; (Rh) | 1 |
| 20***96 | Support As-Rops; (Lh) | 1 |
298-2636 Motor Gp-Blower
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 23***45 | Cushion As; (Cloth) | 1 |
330-5015 Motor Gp-Window Wiper -Front
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
330-5017 Motor Gp-Window Wiper -Rear
| 16***83 | Knob-Lumbar | 1 |
| 16***97 | Cushion Assem. | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
252-7169 Mounting Gp-Air Conditioner -Rops Mounted Condenser
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
214-1740 Mounting Gp-Cab
| 16***83 | Knob-Lumbar | 1 |
| 21***40 | Mounting Group-Cab | 1 |
| 25***28 | Plug | 3 |
325-4461 Mounting Gp-Monitor
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***72 | Setscrew-Hex Socket; (M5x0.8x20-mm) | 1 |
282-8250 Mounting Gp-Monitor -Grade Control
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
241-7920 Mounting Gp-Monitor -Grade Control
| 16***83 | Knob-Lumbar | 1 |
| 24***20 | Mounting Group-Monitor; -Grade Control | 1 |
| 25***28 | Plug | 3 |
259-4746 Mounting Gp-Radio -Grade Control
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***72 | Setscrew-Hex Socket; (M5x0.8x20-mm) | 1 |
243-5158 Mounting Gp-Radio -Caes-Grade Control
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***72 | Setscrew-Hex Socket; (M5x0.8x20-mm) | 1 |
| 11***79 | Pedal; (Brake)(Service) | 1 |
273-2696 Mounting Gp-Radio -Citizen Band
| 20***76 | Platform Group | 1 |
| 20***79 | Wiring Group-Platform | 1 |
| 20***37 | Heater Group-Cab | 1 |
207-4801 Mounting Gp-Rops
| 09***24 | Plug-Button | 1 |
| 11***31 | Mount Assem. | 8 |
| 18***66 | Sleeve | 4 |
256-0190 Operator Ar
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
180-7305 Pan Gp-Backrest -Vinyl
| 18***05 | Pan Group-Backrest; -Vinyl | 1 |
| 26***91 | Screen As; (Rh) | 1 |
| 26***62 | Screen As; (Lh) | 1 |
292-9237 Pan Gp-Backrest -Lumbar
| 0T***44 | Bolt (1.25" Long) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
| 29***37 | Pan Group-Backrest; -Cloth, Lumbar | 1 |
178-0604 Pan Gp-Backrest -Cloth
| 17***04 | Pan Group-Backrest; -Cloth, Lumbar | 1 |
| 20***97 | Rops As | 1 |
292-9238 Pan Gp-Backrest -Vinyl
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
292-6402 Pan Gp-Backrest -Lumbar
| 16***86 | Seat Group-Suspension; -Cloth | 1 |
| 29***02 | Pan Group-Backrest; -Lumbar | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
178-0605 Pan Gp-Backrest -Lumbar
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 1K***60 | Spacer | 2 |
| 21***98 | Screen As | 1 |
231-9290 Panel Gp-Control
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
231-7314 Pedal Gp-Governor & Brake
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***26 | Cushion As | 1 |
214-4193 Platform Ar
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***91 | Rod | 1 |
| 17***83 | Extension Group-Backrest; (Vinyl) | 1 |
205-8576 Platform Gp
| 20***74 | Seat Group-Suspension; -Cloth, Air-Cloth | 1 |
| 20***76 | Platform Group | 1 |
| 9V***18 | Grommet | 1 |
210-2270 Recliner Gp-Seat
| 16***65 | Suspension Group-Seat | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
217-4531 Rops As
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 17***06 | Seat Group | 1 |
207-4800 Rops Gp
| 16***65 | Suspension Group-Seat | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
213-6382 Screen Gp-Protection -Rear
| 15***50 | Seat Group-Suspension; -Vinyl | 1 |
| 21***82 | Screen Group-Protection; -Rear | 1 |
272-6441 Screen Gp-Protection
| 20***74 | Seat Group-Suspension; -Cloth, Air-Cloth | 1 |
| 27***41 | Screen Group-Protection | 1 |
214-1096 Seat & Mounting Gp -Cloth
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
222-0345 Seat Belt Gp -Retractable
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
214-1196 Seat Gp -Cloth, Air
| 21***96 | Seat Group; -Air Suspension, Cloth | 1 |
| 27***39 | Catch | 1 |
| 27***41 | Lock As | 1 |
178-0606 Seat Gp -Cloth
| 13***93 | Bushing | 1 |
| 17***06 | Seat Group | 1 |
| 24***72 | Screw-Machine; (8-16x7.75-In) | 8 |
180-7304 Seat Gp -Vinyl
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***28 | Elbow-Hose | 2 |
| 18***04 | Seat Group; (Vinyl) | 1 |
178-0603 Seat Gp -Cloth
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***60 | Strap | 2 |
| 14***95 | Hose; (650-cm Each) | 0 |
184-6011 Seat Gp -Vinyl
| 11***24 | Button | 18 |
| 13***79 | Washer; (11x32x3-mm Thk) | 8 |
| 18***11 | Seat Group | 1 |
214-1197 Seat Gp-Suspension -Vinyl
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***70 | Screw-Machine; (M6x1x40-mm) | 1 |
| 12***40 | Blade As-Wiper; (330-mm)(Front) | 4 |
318-8519 Seat Gp-Suspension -Cloth, Air
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 13***88 | Clip | 2 |
160-7186 Seat Gp-Suspension -Cloth
| 16***86 | Seat Group-Suspension; -Cloth | 1 |
| 27***39 | Catch | 1 |
| 27***40 | Stop | 1 |
200-3174 Seat Gp-Suspension -Cloth, Air-Cloth
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***70 | Screw-Machine; (M6x1x40-mm) | 1 |
| 12***40 | Blade As-Wiper; (330-mm)(Front) | 4 |
159-2950 Seat Gp-Suspension -Vinyl
| 15***50 | Seat Group-Suspension; -Vinyl | 1 |
| 27***39 | Catch | 1 |
| 27***41 | Lock As | 1 |
191-2933 Suspension Gp-Seat -Air
| 19***33 | Suspension Group-Seat; -Air-Cloth | 1 |
| 20***23 | Cap; (Wiper) | 1 |
| 26***74 | Shaft As-Pivot | 1 |
160-7165 Suspension Gp-Seat
| 16***65 | Suspension Group-Seat | 1 |
| 20***23 | Cap; (Wiper) | 1 |
| 26***73 | Shaft As-Pivot | 1 |
214-1790 Tank Gp-Window Washer
| 10***38 | Blade As-Semi-Universal | 1 |
| 21***90 | Tank Group-Window Washer | 1 |
| 9W***41 | Edge Group-Bit & Cutting; -Semi-Universal | 1 |
226-9249 Tank Gp-Window Washer
| 22***49 | Tank Group-Window Washer | 1 |
| 4Z***62 | Blade As-Semi-Universal; -Landfill | 1 |
| 7T***91 | Edge Group-Bit & Cutting; -Semi-Universal | 1 |
298-2647 Valve Gp-Water
| 29***47 | Valve Group-Water | 1 |
| 4Z***64 | Blade As-Semi-Universal | 1 |
| 7T***91 | Edge Group-Bit & Cutting; -Semi-Universal | 1 |
214-1780 Washer Gp-Window
| 21***80 | Washer Group-Window | 1 |
| 4Z***66 | Blade As-Semi-Universal | 1 |
| 7T***91 | Edge Group-Bit & Cutting; -Semi-Universal | 1 |
247-8271 Window Gp-Cab -40-Psi Glass
| 10***04 | Blade As-Semi-Universal | 1 |
| 24***71 | Window Group-Cab; -40-Psi Glass | 1 |
| 7T***91 | Edge Group-Bit & Cutting; -Semi-Universal | 1 |
214-7245 Window Gp-Sliding -Lh
| 21***45 | Window Group-Sliding; -Lh | 1 |
| 4Z***36 | Blade As-Universal | 1 |
| 9W***42 | Edge Group-Bit & Cutting; -Universal | 1 |
214-7244 Window Gp-Sliding -Rh
| 11***39 | Blade As-Semi-Universal | 1 |
| 21***44 | Window Group-Sliding; -Rh | 1 |
| 7T***91 | Edge Group-Bit & Cutting; -Semi-Universal | 1 |
214-7246 Window Gp-Sliding -Rear
| 21***46 | Window Group-Sliding; -Rear | 1 |
| 4Z***68 | Blade As-Universal | 1 |
| 7T***94 | Edge Group-Bit & Cutting; -Universal | 1 |
214-1770 Wiper Gp-Window
| 21***70 | Wiper Group-Window | 1 |
| 4Z***36 | Blade As-Universal | 1 |
| 7T***94 | Edge Group-Bit & Cutting; -Universal | 1 |
254-9371 Wiper Gp-Window
| 25***71 | Wiper Group-Window | 1 |
| 4Z***72 | Blade As-Universal; -Landfill | 1 |
| 7T***94 | Edge Group-Bit & Cutting; -Universal | 1 |
310-5931 Wiper Gp-Window -Twin-Rear
| 31***31 | Wiper Group-Window; -Twin-Rear | 1 |
| 4Z***74 | Blade As-Universal | 1 |
| 7T***94 | Edge Group-Bit & Cutting; -Universal | 1 |
254-8962 Wiper Pivot Gp -Rear, Rh
| 11***41 | Blade As-Universal | 1 |
| 25***62 | Wiper Pivot Group; -Rear, Rh | 1 |
| 7T***94 | Edge Group-Bit & Cutting; -Universal | 1 |
254-8961 Wiper Pivot Gp -Rear, Lh
| 10***18 | Blade As-Universal | 1 |
| 25***61 | Wiper Pivot Group; -Rear, Lh | 1 |
| 7T***94 | Edge Group-Bit & Cutting; -Universal | 1 |
Power Train
9w-9154 Axle Gp
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 18 |
| 10***33 | Carrier-Planetary | 1 |
| 10***36 | Retainer | 1 |
202-2723 Case & Parts Gp-Planetary
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 18 |
| 10***33 | Carrier-Planetary | 1 |
| 10***36 | Retainer | 1 |
202-2721 Control Gp-Transmission Hyd
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 18 |
| 10***33 | Carrier-Planetary | 1 |
| 10***36 | Retainer | 1 |
205-8589 Cooler Gp-Transmission Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 20***89 | Cooler Group-Transmission Oil | 1 |
205-8617 Coupling Gp-Pump
| 13***29 | Seal-O-Ring | 1 |
| 13***98 | Spring | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
106-4150 Drain Gp-Ecology -Transmission, Torque Converter
| 10***50 | Drain Group-Ecology; -Transmission, Torque Converter | 1 |
| 13***29 | Seal-O-Ring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
164-4210 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 9 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 11 |
| 0S***00 | Bolt Flywheel Assembly To Crankshaft | 18 |
282-4032 Drive Gp-Final
| 06***61 | Seal-O-Ring (Id=40.87mm) | 2 |
| 06***55 | Seal-O-Ring (Id=47.22mm) | 2 |
| 10***33 | Clip; (Slot) | 1 |
186-2949 Drive Gp-Final -Cold Weather
| 06***61 | Seal-O-Ring (Id=40.87mm) | 2 |
| 06***55 | Seal-O-Ring (Id=47.22mm) | 2 |
| 10***33 | Clip; (Slot) | 1 |
185-7593 Drive Gp-Final
| 06***61 | Seal-O-Ring (Id=40.87mm) | 2 |
| 06***55 | Seal-O-Ring (Id=47.22mm) | 2 |
| 10***33 | Clip; (Slot) | 1 |
192-9147 Drive Gp-Final -Waste Handling
| 06***61 | Seal-O-Ring (Id=40.87mm) | 2 |
| 06***55 | Seal-O-Ring (Id=47.22mm) | 2 |
| 10***33 | Clip; (Slot) | 1 |
6i-3638 Drive Gp-Pump
| 0V***75 | Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive | 16 |
| 1A***69 | Bolt (R.H. Side Flywheel Housing) | 3 |
| 1S***05 | Washer 14.2 mm (.56 In.) Thk. | 18 |
245-6555 Filter Gp-Oil -Xmsn, Torque Converter Charge
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
334-0572 Filter Gp-Oil
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
202-2720 Gear Gp-Bevel & Pinion
| 16***10 | Drive Group-Final | 2 |
| 20***19 | Transmission Ar | 1 |
| 20***20 | Gear Group-Bevel & Pinion | 1 |
205-8619 Lines Gp-Power Train Oil
| 12***09 | Seal-O-Ring | 7 |
| 13***78 | Body As-Oil Pump; (Transmission Charging) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
8e-7695 Mounting Gp-Transmission
| 21***90 | Housing | 1 |
| 3S***39 | Cover-Top | 1 |
| 3S***40 | Washer-Wave; (68.1x80.8x0.5-mm Thk) | 1 |
202-2722 Planetary Gp-Transmission
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 20***22 | Planetary Group-Transmission | 1 |
| 4F***03 | Plug (3.25" Diameter) | 1 |
205-8605 Power Train Ar
| 20***05 | Power Train Ar | 1 |
| 20***24 | Yoke | 1 |
| 20***28 | Yoke | 1 |
202-7999 Pump Gp-Gear -Transmission, Torque Converter
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 24 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
| 1T***29 | Nut-Bearing Lock | 1 |
272-6587 Pump Gp-Gear -Transmission, Torque Converter
| 16***66 | Drive Group-Differential Steering | 1 |
| 20***20 | Gear Group-Bevel & Pinion | 1 |
| 20***21 | Control Group-Transmission Hydraulic | 1 |
272-6588 Pump Gp-Gear -Transmission, Torque Converter
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 27***88 | Pump Group-Gear; -Transmission, Torque Converter | 1 |
| 5P***13 | Washer-Between Welded Nut & Top Swivel | 8 |
202-8000 Pump Gp-Gear -Power Train Oil
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 10***50 | Drain Group-Ecology; -Transmission, Torque Converter | 1 |
| 11***27 | Seal-Lip Type | 1 |
213-8793 Screen Gp-Magnetic -Power Train Oil Sump
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***93 | Screen Group-Magnetic; -Power Train Oil Sump | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
160-4927 Segment Gp-Sprocket
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***54 | Screw-Adjustment; (M12x1.75x18-mm) | 1 |
| 10***23 | Adjuster Assem. | 1 |
207-4803 Shaft Gp-Drive
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 19***63 | Spool | 1 |
209-3426 Slip Joint Gp
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 19***05 | Cartridge Assem. | 1 |
| 20***26 | Slip Joint Group | 1 |
205-4198 Torque Converter Gp
| 20***98 | Torque Converter Group | 1 |
| 24***30 | Bar Ar-Striker | 1 |
205-4199 Torque Converter Gp
| 15***55 | Seal; (34-cm) | 0 |
| 1H***06 | Pin As-Drawbar | 1 |
| 20***40 | Seal; (186-cm) | 0 |
202-2719 Transmission Ar
| 20***19 | Transmission Ar | 1 |
| 4Z***59 | Striker As-Lh | 1 |
| 4Z***61 | Striker As-Rh | 1 |
7g-3265 Universal Joint Gp -Drive Shaft
| 4Z***84 | Frame & Bearing As; -Trash-Single Shank Ripper | 1 |
| 7G***65 | Universal Joint Group; -Drive Shaft | 1 |
244-3114 Valve Gp-Modulating -Transmission Clutch
| 20***34 | Frame & Bearing As; -Trash-Multishank Ripper | 1 |
| 24***14 | Valve Group-Modulating; -Transmission Hydraulic Control | 1 |
205-4652 Valve Gp-Priority -Lubrication Distribution
| 12***35 | Hinge As; (Door, Rh) | 2 |
| 12***36 | Hinge As; (Door, Lh) | 2 |
| 1K***72 | Locknut Horn To Guard | 10 |
207-2833 Valve Gp-Relief -Torque Converter Outlet Press
| 11***88 | Plate As; (Lh) | 1 |
| 11***91 | Plate As; (Rh) | 1 |
| 20***33 | Valve Group-Relief; -Torque Converter Outlet Press | 1 |
198-4607 Valve Gp-Solenoid
| 10***86 | Valve As-Drain; (Ecology) | 1 |
| 10***87 | Plug-Drain; (Power Train Oil Tank) | 1 |
| 16***80 | Plug As. | 2 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Hydraulic Tank
| 9G***88 | Protection Cover Group; -Hydraulic Tank-Steering Tank Fill Cap-Hydraulic Tank Fill Cap | 1 |
304-6918 Film Gp
| 30***18 | Gear; Sun, Film Group | 1 |
205-8575 Film Gp
| 20***75 | Film Group | 1 |
256-7916 Plate & Film Gp -International
| 25***16 | Plate & Film Group; -International | 1 |
205-8574 Plate & Film Gp
| 20***74 | Plate & Film Group | 1 |
224-3979 Plate Gp-Engine Identification -C18 Acert
| 22***79 | Plate Group-Engine Identification; -C18 Acert | 1 |
Steering And Braking System
247-3005 Actuator Gp-Pump -Steering
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 8 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 21 |
| 10***58 | Slinger-Oil | 1 |
207-1287 Brake Gp-Service
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 6 |
| 1T***95 | Race-Roller Bearing | 1 |
| 20***87 | Brake Group-Service | 1 |
223-2115 Control Gp-Parking Brake
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 13***74 | Cover Assem. | 1 |
| 13***87 | Retainer | 1 |
222-1462 Control Gp-Steering & Xmsn
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 14***39 | Connector As. | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
237-0158 Control Gp-Steering & Xmsn
| 10***26 | Head | 1 |
| 23***58 | Control Group-Steering & Xmsn | 1 |
| 24***89 | Rotating Group-Motor; -Steering | 1 |
166-0666 Drive Gp-Differential Steering
| 13***40 | Seal-Shaft | 1 |
| 14***88 | Plate-Wear | 1 |
| 16***66 | Drive Group-Differential Steering | 1 |
6y-9052 Drive Gp-Steering
| 11***99 | Pin | 2 |
| 11***01 | Orifice | 1 |
| 11***05 | Setscrew | 1 |
212-2297 Filter Gp-Oil -Steering
| 09***16 | Ring-Retaining; (External) | 1 |
| 11***14 | Valve Group-Flushing; -Steering Motor | 1 |
| 12***48 | Seal-Shaft | 1 |
244-8864 Head Gp-Pump -Steering Pump
| 09***27 | Ring-Retaining | 1 |
| 11***14 | Shim; (1.2-mm Thk) | 1 |
| 11***15 | Shim; (47.7x64.6x1-mm Thk) | 1 |
205-8615 Lines Gp-Steering
| 11***71 | Plate | 1 |
| 20***74 | Valve Group-Brake Control | 1 |
| 20***15 | Lines Group-Steering | 1 |
162-5357 Manifold & Valve Gp -Secondary Brake
| 10***30 | Spring | 2 |
| 11***42 | Plate-End | 1 |
| 13***03 | Spool | 2 |
175-4972 Manifold & Valve Gp -Parking, Secondary Brake
| 12***71 | Seal-O-Ring | 2 |
| 13***99 | Plate | 1 |
| 13***00 | Plate | 1 |
214-1094 Motor Gp-Piston -Steering
| 12***71 | Seal-O-Ring | 2 |
| 13***99 | Plate | 1 |
| 13***51 | Plate-Separator | 1 |
244-8872 Pump Gp-Gear -Charge, Steering
| 11***09 | Plate | 1 |
| 11***10 | Retainer | 2 |
| 11***12 | Pin | 2 |
214-1093 Pump Gp-Piston -Steering
| 21***93 | Pump Group-Piston; -Steering | 1 |
| 6E***01 | Setscrew-Adjustment | 1 |
| 6V***86 | Seal-O-Ring | 1 |
244-5689 Rotating Gp-Motor -Steering
| 08***39 | Seal-O-Ring (Id=26.64mm) | 2 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 2 |
| 19***70 | Solenoid Group-Proportional; (12-Volt)(Hydraulic Fan) | 2 |
247-2724 Rotating Gp-Pump -Steering
| 11***42 | Nut; (M16x1.5-mm-Thd) | 1 |
| 24***71 | Cover | 1 |
| 24***75 | Cover | 1 |
209-9360 Valve & Mtg Gp-Steer & Brake
| 20***60 | Valve & Mtg Group-Steer & Brake | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***44 | Spring | 1 |
201-7269 Valve Gp-Brake Control
| 20***69 | Valve Group-Brake Control | 1 |
| 6E***40 | Nut-Sealing; (M10x1-Thd) | 1 |
| 6V***56 | Seal-O-Ring; (25.07mm Id) | 1 |
201-7274 Valve Gp-Brake Control
| 18***62 | Plug As | 1 |
| 20***74 | Valve Group-Brake Control | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
261-4677 Valve Gp-Brake Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***49 | Coil Assem. | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
119-6114 Valve Gp-Flushing -Steering Motor
| 11***14 | Valve Group-Flushing; -Steering Motor | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
6e-4392 Valve Gp-Pump Control -Steering Piston Pump
| 20***58 | Film-Warning; (Accumulator)(High Pressure Cylinder) | 2 |
| 6E***92 | Valve Group-Pressure Compensator; -Pressure Compensator-Steering | 1 |
244-8860 Valve Gp-Pump Control -Steering
| 20***58 | Film-Warning; (Accumulator)(High Pressure Cylinder) | 2 |
| 24***60 | Valve Group-Pump Control; -Steering | 1 |
244-8862 Valve Gp-Pump Control -Steering
| 20***58 | Film-Warning; (Accumulator)(High Pressure Cylinder) | 2 |
| 22***85 | Screw-Vent; (M8x1.5-Thd) | 1 |
| 22***65 | Seal-Ring | 1 |
246-1246 Valve Gp-Relief -Steering Piston Pump
| 12***20 | Plate | 1 |
| 12***21 | Plate As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
261-7593 Valve Gp-Relief -Steering Pump Oil
| 19***87 | Control & Mtg Group-Implement; -Ripper | 1 |
| 20***55 | Lines Group-Ripper | 1 |
| 26***93 | Valve Group-Relief; -Steering Pump Oil | 1 |
9t-9850 Valve Gp-Relief -Steering Pump Oil
| 20***40 | Lines Group-Tilt Cylinder; -Dual | 1 |
| 20***72 | Control Group-Joystick; -Bulldozer, Dual Tilt | 1 |
| 21***26 | Valve Group-Control; -Dual Tilt | 1 |
172-2392 Valve Gp-Solenoid
| 17***92 | Valve Group-Solenoid; (Parking, Secondary Brake) | 1 |
| 20***08 | Control Group-Implement; (Joystick Assembly) (Refer To Page 6) | 1 |
| 20***09 | Lines Group-Winch | 1 |
174-4909 Valve Gp-Solenoid
| 17***09 | Valve Group-Solenoid; (Steering Clutch, Brake, Rh, Lh) | 1 |
| 24***09 | Control Group-Joystick; -Bulldozer-Grade Control, Auto Carry | 1 |
| 24***47 | Control Group-Joystick; -Bulldozer-Grade Control, Auto Carry | 1 |
Undercarriage
179-6823 Bar As-Equalizer -Cold Weather
| 13***51 | Cap As-Track Roller | 1 |
| 17***23 | Bar As-Equalizer; -Cold Weather | 1 |
| 1T***68 | Pin (.188" Diameter) | 1 |
344-5381 Bar As-Equalizer
| 18***57 | Frame As-Track Roller; (Front) | 2 |
| 19***44 | Frame As; (Rh) | 1 |
| 19***45 | Frame As; (Lh) | 1 |
160-2539 Bar Gp-Equalizer
| 16***39 | Bar Group-Equalizer | 1 |
| 16***47 | Idler Group-Track; -Waste Handler | 4 |
341-7610 Bar Gp-Equalizer
| 10***46 | Retainer | 2 |
| 10***47 | Collar-Seal | 2 |
| 10***57 | Seal-O-Ring | 2 |
177-4651 Bar Gp-Equalizer
| 16***55 | Guard As-Idler | 4 |
| 16***60 | Bar | 4 |
| 16***61 | Guard As; (Rh) | 2 |
140-9699 Bar Gp-Equalizer -Roller Frame, Straight
| 14***99 | Bar Group-Equalizer; -Roller Frame, Straight | 1 |
| 15***20 | Bar | 1 |
| 15***21 | Bar | 2 |
131-1625 Cap Gp-Track Idler -Front, Lh Outer, Rh Inner-Rear, Lh Inner, Rh Outer
| 10***57 | Seal-O-Ring | 2 |
| 13***25 | Cap Group-Track Idler; -Front, Lh Outer, Rh Inner-Rear, Lh Inner, Rh Outer | 1 |
| 15***09 | Shaft-Track Idler | 1 |
131-1626 Cap Gp-Track Idler -Front, Lh Outer, Rh Inner-Rear, Lh Inner, Rh Outer
| 10***46 | Retainer | 2 |
| 10***47 | Collar-Seal | 2 |
| 10***57 | Seal-O-Ring | 2 |
6t-1142 Cap Gp-Track Roller -Carrier Roller
| 18***80 | Pin-Track | 43 |
| 18***81 | Bushing-Track | 43 |
| 20***45 | Seal As; (Link) | 86 |
204-1327 Frame Gp-Telescoping Recoil
| 18***81 | Bushing-Track | 43 |
| 19***22 | Pin-Track | 42 |
| 19***23 | Pin-Track; (Master) | 1 |
341-7494 Frame Gp-Telescoping Recoil
| 18***81 | Bushing-Track | 43 |
| 25***45 | Link-Track Master; (Pin End, Rh) | 1 |
| 25***46 | Link-Track Master; (Pin End, Lh) | 1 |
196-1353 Guard Ar-Idler -Waste Handler
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***11 | Adapter Group | 1 |
| 14***59 | Elbow Group | 1 |
196-8564 Guard Gp-Idler -With Rubber Guards
| 19***64 | Guard Group-Idler; -With Rubber Guards | 1 |
| 24***42 | Idler Group-Track; -Cold Weather | 4 |
| 24***43 | Roller Group-Track-Single Flange; -Cold Weather | 8 |
167-1947 Idler Gp-Track -Waste Handler
| 16***47 | Idler Group-Track; -Waste Handler | 1 |
| 19***55 | Roller Group-Track-Single Flange | 2 |
| 21***98 | Support | 4 |
245-9942 Idler Gp-Track -Cold Weather
| 10***94 | Shaft-Track Roller | 1 |
| 10***44 | Retainer | 2 |
| 10***45 | Collar-Seal | 2 |
125-4655 Idler Gp-Track
| 12***55 | Idler Group-Track | 1 |
| 19***55 | Roller Group-Track-Single Flange | 8 |
| 32***62 | Plate | 6 |
199-5525 Link As-Track
| 10***94 | Shaft-Track Roller | 1 |
| 10***44 | Retainer | 2 |
| 10***45 | Collar-Seal | 2 |
266-2899 Link As-Track -Steel Mill
| 10***94 | Shaft-Track Roller | 1 |
| 10***44 | Retainer | 2 |
| 10***45 | Collar-Seal | 2 |
199-5531 Link As-Track
| 10***94 | Shaft-Track Roller | 1 |
| 10***44 | Retainer | 2 |
| 10***45 | Collar-Seal | 2 |
213-9253 Lubrication Gp-Pivot Shaft
| 21***53 | Lubrication Group-Pivot Shaft | 1 |
125-2140 Roller & Idler Ar -Cold Weather
| 12***40 | Roller & Idler Ar; -Cold Weather | 1 |
211-5079 Roller Ar-Track
| 21***79 | Roller Ar-Track | 1 |
211-9297 Roller Ar-Track Carrier -Horizontal Mounted
| 21***97 | Roller Ar-Track Carrier; -Horizontal Mounted-Stockpile | 1 |
196-9954 Roller Gp-Track-Double Flange
| 19***54 | Roller Group-Track-Double Flange | 1 |
245-9944 Roller Gp-Track-Double Flange -Cold Weather
| 24***44 | Roller Group-Track-Double Flange; -Cold Weather | 1 |
245-9943 Roller Gp-Track-Single Flange -Cold Weather
| 06***61 | Ring-Retaining | 16 |
| 13***79 | Bogie As; (Front) | 2 |
| 13***80 | Bogie As; (Rear) | 2 |
196-9955 Roller Gp-Track-Single Flange
| 06***61 | Ring-Retaining | 16 |
| 13***79 | Bogie As; (Front) | 2 |
| 13***80 | Bogie As; (Rear) | 2 |
243-4368 Shoe-Track -Abrasive Resistant Material
| 19***25 | Link As-Track | 1 |
| 23***74 | Shoe-Track | 43 |
| 24***68 | Shoe-Track; -Abrasive Resistant Material | 1 |
243-4367 Shoe-Track -Abrasive Resistant Material
| 19***25 | Link As-Track | 1 |
| 1Q***49 | Shoe-Track | 43 |
| 24***67 | Shoe-Track; -Abrasive Resistant Material | 1 |
232-3326 Shoe-Track -Abrasive Resistant Material
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 13***72 | Retainer | 2 |
| 13***00 | Cylinder As; (Rh) | 1 |
243-4370 Shoe-Track -Abrasive Resistant Material
| 19***25 | Link As-Track | 1 |
| 23***84 | Shoe-Track | 43 |
| 24***70 | Shoe-Track; -Abrasive Resistant Material | 1 |
243-4365 Shoe-Track -Abrasive Resistant Material
| 19***25 | Link As-Track | 1 |
| 24***65 | Shoe-Track; -Abrasive Resistant Material | 1 |
| 6T***38 | Bolt-Track; (1-14x3.54-In) | 168 |
243-4366 Shoe-Track -Abrasive Resistant Material
| 19***25 | Link As-Track | 1 |
| 23***75 | Shoe-Track | 43 |
| 24***66 | Shoe-Track; -Abrasive Resistant Material | 1 |
341-7495 Suspension Gp-Bogie
| 19***25 | Link As-Track | 1 |
| 34***95 | Suspension Group-Bogie | 1 |
| 6T***38 | Bolt-Track; (1-14x3.54-In) | 168 |
155-8096 Suspension Gp-Bogie
| 15***96 | Suspension Group-Bogie | 1 |
| 19***25 | Link As-Track | 1 |
| 23***73 | Shoe-Track | 43 |
196-8561 Track Adjuster & Recoil Gp
| 12***07 | Shoe-Track | 43 |
| 19***61 | Track Adjuster & Recoil Group | 1 |
| 19***25 | Link As-Track | 1 |
203-2200 Track Gp -2-Required
| 20***00 | Track Group; -2-Required | 1 |
| 4B***58 | Screw (Identification Plate) Mounting | 4 |
| 6V***26 | Plate-Warning; (Recoil Spring) | 1 |
234-9441 Track Gp -2-Required
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 10 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 7 |
| 11***31 | Disc-Friction | 8 |
244-8637 Track Gp -2-Required
| 1W***48 | Dowel | 1 |
| 24***06 | Spacer; (6.4x12.5x0.76-mm Thk) | 1 |
| 24***37 | Track Group; -2-Required | 1 |
183-2127 Track Gp -2-Required, Waste Handling
| 18***27 | Track Group; -2-Required, Waste Handling | 1 |
| 19***31 | Link As-Track | 1 |
| 6T***38 | Bolt-Track; (1-14x3.54-In) | 168 |
289-8545 Track Gp -2-Required
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***65 | Screw; (M6x1x20-mm) | 1 |
7t-2289 Track Gp -2-Required
| 19***25 | Link As-Track | 1 |
| 6T***38 | Bolt-Track; (1-14x3.54-In) | 168 |
| 6V***28 | Bolt-Track Master; (1-14x5.83-In) | 2 |
222-9936 Track Gp -2-Required
| 12***55 | Idler Group-Track | 4 |
| 13***25 | Cap Group-Track Idler; -Front, Lh Outer, Rh Inner-Rear, Lh Inner, Rh Outer | 4 |
| 13***26 | Cap Group-Track Idler; -Front, Lh Outer, Rh Inner-Rear, Lh Inner, Rh Outer | 4 |
199-5538 Track Gp -2-Required
| 13***17 | Shoe-Track; -Custom | 43 |
| 19***38 | Track Group; -2-Required | 1 |
| 26***99 | Link As-Track; -Steel Mill | 1 |
228-9812 Track Gp -2-Required
| 14***99 | Bar Group-Equalizer; -Roller Frame, Straight | 1 |
| 22***12 | Track Group; -2-Required | 1 |
| 22***92 | Frame As; (Rh) | 1 |
183-2123 Track Gp -2-Required
| 18***23 | Track Group; -2-Required | 1 |
| 19***31 | Link As-Track | 1 |
| 23***74 | Shoe-Track | 43 |
199-5536 Track Gp -2-Required
| 19***31 | Link As-Track | 1 |
| 19***36 | Track Group; -2-Required | 1 |
| 6T***38 | Bolt-Track; (1-14x3.54-In) | 168 |
183-2122 Track Gp -2-Required
| 18***22 | Track Group; -2-Required | 1 |
| 19***25 | Link As-Track | 1 |
| 1Q***55 | Shoe-Track | 43 |
266-2900 Track Gp -2-Required, Steel Mill
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***65 | Screw; (M6x1x20-mm) | 1 |
199-5537 Track Gp -2-Required
| 19***25 | Link As-Track | 1 |
| 19***37 | Track Group; -2-Required | 1 |
| 24***68 | Shoe-Track | 43 |
230-4142 Track Gp -2-Required
| 09***42 | Ring-Retaining | 2 |
| 11***38 | Spring; (Outer) | 2 |
| 11***47 | Spring; (Inner) | 2 |
183-2121 Track Gp -2-Required
| 13***17 | Shoe-Track; -Custom | 43 |
| 18***21 | Track Group; -2-Required | 1 |
| 19***25 | Link As-Track | 1 |
161-4370 Track Gp -2-Required
| 16***70 | Track Group; -2-Required | 1 |
| 19***25 | Link As-Track | 1 |
| 6T***38 | Bolt-Track; (1-14x3.54-In) | 168 |
183-2124 Track Gp -2-Required
| 13***17 | Shoe-Track; -Custom | 43 |
| 18***24 | Track Group; -2-Required | 1 |
| 19***31 | Link As-Track | 1 |
203-2199 Track Gp -2-Required
| 19***25 | Link As-Track | 1 |
| 20***99 | Track Group; -2-Required | 1 |
| 28***47 | Shoe-Track | 43 |
175-2962 Tube As-Roller Frame
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***65 | Screw; (M6x1x20-mm) | 1 |
242-5297 Undercarriage Ar -Roller Frame, Straight
| 11***58 | Bearing | 2 |
| 13***89 | Clip; (Ladder) | 2 |
| 15***51 | Clip | 2 |
205-8606 Undercarriage Ar
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***58 | Bearing | 2 |
Work Tools
4z-0627 Blade & Edge Gp-Semi-Universal
| 10***04 | Blade As-Semi-Universal | 1 |
| 4Z***27 | Blade & Edge Group-Semi-Universal | 1 |
4z-0630 Blade & Edge Gp-Semi-Universal
| 21***84 | Plate Group-Wear; -Semi-Universal Blade | 1 |
| 4Z***30 | Blade & Edge Group-Semi-Universal | 1 |
| 4Z***62 | Blade As-Semi-Universal; -Landfill | 1 |
102-6347 Blade & Edge Gp-Semi-Universal
| 10***04 | Blade As-Semi-Universal | 1 |
| 10***47 | Blade & Edge Group-Semi-Universal | 1 |
| 7T***03 | Plate-Push | 1 |
4z-0631 Blade & Edge Gp-Semi-Universal
| 10***92 | Bracket As | 2 |
| 10***94 | Bracket; (Rh) | 1 |
| 10***95 | Bracket; (Lh) | 1 |
108-8290 Blade & Edge Gp-Semi-Universal
| 10***90 | Blade & Edge Group-Semi-Universal | 1 |
| 11***41 | Blade As-Universal | 1 |
| 21***58 | Plate Group-Wear; -Universal Blade | 1 |
4z-0629 Blade & Edge Gp-Semi-Universal
| 4Z***29 | Blade & Edge Group-Semi-Universal | 1 |
| 4Z***62 | Blade As-Semi-Universal; -Landfill | 1 |
| 7T***03 | Plate-Push | 1 |
102-6346 Blade & Edge Gp-Semi-Universal
| 10***04 | Blade As-Semi-Universal | 1 |
| 10***37 | Guard Group-Rock; -Semi-Universal | 1 |
| 10***46 | Blade & Edge Group-Semi-Universal | 1 |
4z-0635 Blade & Edge Gp-Universal
| 10***92 | Bracket As | 2 |
| 11***66 | Trunnion | 1 |
| 11***21 | Trunnion As | 1 |
4z-0632 Blade & Edge Gp-Universal
| 10***18 | Blade As-Universal | 1 |
| 4Z***32 | Blade & Edge Group-Universal | 1 |
| 4Z***62 | Strap | 8 |
108-8291 Blade & Edge Gp-Universal
| 10***46 | Blade & Edge Group-Semi-Universal | 1 |
| 10***91 | Blade & Edge Group-Universal | 1 |
| 1U***72 | Pin | 2 |
4z-0625 Blade & Edge Gp-Universal
| 10***18 | Blade As-Universal | 1 |
| 4Z***25 | Blade & Edge Group-Universal | 1 |
| 7T***03 | Plate-Push | 1 |
113-3240 Blade & Edge Gp-Universal
| 10***91 | Blade & Edge Group-Universal | 1 |
| 11***40 | Blade & Edge Group-Universal | 1 |
| 1U***72 | Pin | 2 |
4z-0634 Blade & Edge Gp-Universal
| 21***58 | Plate Group-Wear; -Universal Blade | 1 |
| 4Z***34 | Blade & Edge Group-Universal | 1 |
| 4Z***72 | Blade As-Universal; -Landfill | 1 |
4z-0636 Blade & Edge Gp-Universal
| 10***18 | Blade As-Universal | 1 |
| 11***41 | Guard Group-Rock; -Universal | 1 |
| 4Z***36 | Blade & Edge Group-Universal | 1 |
102-1938 Blade As-Semi-Universal
| 10***38 | Blade As-Semi-Universal | 1 |
| 11***04 | Pin As | 2 |
| 13***94 | Pin As | 2 |
113-3239 Blade As-Semi-Universal
| 11***04 | Pin As | 2 |
| 11***39 | Blade As-Semi-Universal | 1 |
| 13***21 | Spacer | 2 |
4z-9362 Blade As-Semi-Universal -Landfill
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 36 |
| 4J***08 | Bolt-Plow; (1-8x3.5-In)(1/8x3.5 In) | 36 |
| 4Z***62 | Blade As-Semi-Universal; -Landfill | 1 |
4z-9364 Blade As-Semi-Universal
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 39 |
| 4J***08 | Bolt-Plow; (1-8x3.5-In)(1/8x3.5 In) | 39 |
| 4Z***64 | Blade As-Semi-Universal | 1 |
102-1904 Blade As-Semi-Universal
| 10***04 | Blade As-Semi-Universal | 1 |
| 11***71 | Edge-Cutting | 2 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 39 |
4z-9366 Blade As-Semi-Universal
| 11***71 | Edge-Cutting | 2 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 36 |
| 4J***58 | Bolt--Per Change 1 To 7j***85 | 36 |
4z-9368 Blade As-Universal
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 4Z***68 | Blade As-Universal | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
4z-9336 Blade As-Universal
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 4Z***36 | Blade As-Universal | 1 |
4z-9372 Blade As-Universal -Landfill
| 18***40 | Link | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 10 |
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 24 |
113-3241 Blade As-Universal
| 11***41 | Blade As-Universal | 1 |
| 21***55 | Plate; (Rh) | 1 |
| 21***56 | Plate | 1 |
108-8318 Blade As-Universal
| 10***18 | Blade As-Universal | 1 |
| 11***94 | Plate | 1 |
| 13***55 | Bolt; (1.5-6x114.3-mm) | 12 |
4z-9374 Blade As-Universal
| 11***94 | Plate | 1 |
| 13***55 | Bolt; (1.5-6x114.3-mm) | 12 |
| 21***77 | Guard As | 1 |
102-6345 Blade Gp-Semi-Universal
| 10***45 | Blade Group-Semi-Universal | 1 |
| 21***85 | Plate-Wear; (Rh) | 1 |
| 21***87 | Plate-Wear; (Lh) | 1 |
106-7365 Blade Gp-Universal
| 10***65 | Blade Group-Universal | 1 |
| 13***11 | Puller Group-Pin; -Single Shank Ripper | 1 |
| 21***23 | Lines Group-Pin Puller Cylinder; -Single Shank Ripper | 1 |
9w-7042 Edge Gp-Bit & Cutting -Universal
| 11***02 | Tooth Group-Ripper; -Single Shank | 1 |
| 13***25 | Carriage As | 1 |
| 4T***79 | Pin Assem. | 2 |
7t-5391 Edge Gp-Bit & Cutting -Semi-Universal
| 13***66 | Link | 2 |
| 13***02 | Plate As | 1 |
| 13***05 | Plate As | 1 |
9w-7041 Edge Gp-Bit & Cutting -Semi-Universal
| 13***23 | Cylinder Group-Ripper; (Raise, Lower) | 2 |
| 13***49 | Cylinder Group-Ripper Tip | 2 |
| 13***07 | Ripper Group; -Single Shank | 1 |
7t-5394 Edge Gp-Bit & Cutting -Universal
| 13***23 | Cylinder Group-Ripper; (Raise, Lower) | 2 |
| 13***49 | Cylinder Group-Ripper Tip | 2 |
| 13***10 | Lines Group-Ripper | 1 |
159-9796 Frame Gp-Ripper
| 15***96 | Frame Group-Ripper | 1 |
| 3G***96 | Lug | 1 |
| 4T***79 | Pin Assem. | 2 |
135-2803 Frame Gp-Ripper
| 13***03 | Frame Group-Ripper | 1 |
| 13***31 | Beam As | 1 |
| 17***47 | Block | 3 |
292-0303 Mounting Gp-Mast -Satellite Receiver
| 11***03 | Shank As-Ripper | 1 |
| 29***03 | Mounting Group-Mast; -Satellite Receiver | 1 |
| 3G***96 | Lug | 1 |
292-0302 Mounting Gp-Mast -Laser Receiver
| 29***02 | Mounting Group-Mast; -Laser Receiver | 1 |
| 34***57 | Tooth Group-Ripper | 1 |
331-1984 Mounting Gp-Mast
| 10***14 | Shank As-Ripper | 1 |
| 33***84 | Mounting Group-Mast | 1 |
| 3G***96 | Lug | 1 |
217-3561 Mounting Gp-Ripper
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 15***65 | Elbow; (Spl) | 1 |
218-3884 Plate Gp-Wear -Semi-Universal
| 11***96 | Film-Stripe; (Right Side,Rear) | 1 |
| 11***97 | Film-Stripe; (Left Side,Rear) | 1 |
| 17***99 | Film-Stripe; (Cat Front, Rh)(Cat) | 1 |
217-7158 Plate Gp-Wear -Universal
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 21***58 | Plate Group-Wear; -Universal Blade | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
216-0124 Puller Ar-Pin
| 21***24 | Puller Ar-Pin | 1 |
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 29***18 | Film-Identification; (Caterpillar) | 1 |
135-5111 Puller Gp-Pin -Single Shank Ripper
| 03***60 | Rivets | 6 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 13***11 | Puller Group-Pin; -Single Shank Ripper | 1 |
217-3562 Ripper Ar -Multi-Shank
| 21***62 | Ripper Ar; -Multi-Shank | 1 |
| 22***44 | Film-Warning; -Universal | 2 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 2 |
217-3563 Ripper Ar -Single Shank
| 21***63 | Ripper Ar; -Single Shank | 1 |
| 22***69 | Plate-Identification; (C18 Acert) | 1 |
| 23***00 | Plate-Identification; (Blank) | 1 |
134-8107 Ripper Gp -Single Shank
| 13***07 | Ripper Group; -Single Shank | 1 |
138-0430 Ripper Gp -Multi-Shank
| 13***30 | Ripper Group; -Multi-Shank | 1 |
114-4502 Tooth Gp-Ripper -Single Shank
| 11***02 | Tooth Group-Ripper; -Single Shank | 1 |
109-9113 Tooth Gp-Ripper -Single Shank
| 10***13 | Tooth Group-Ripper; -Single Shank | 1 |
345-1357 Tooth Gp-Ripper
| 34***57 | Tooth Group-Ripper | 1 |
4t-8987 Tooth Gp-Ripper -Multi Shank
| 4T***87 | Tooth Group-Ripper; -Multi Shank | 1 |
211-7816 Valve Gp-Winch Control -Pilot Proportioning
| 21***16 | Valve Group-Winch Control; -Pilot Proportioning | 1 |
D9T serial number reference
On the D9T the PIN/serial plate sits on the rear of the machine, left side, mounted high on the end of the left main frame rail. On ripper-equipped units it can be partly hidden behind the ripper linkage, so check both sides of the rail if it is not visible right away. The number reads as a 3-character prefix followed by a sequential unit number (for example RJS01761): the prefix ties the machine to its model and assembly run, and the digits after it are just the build sequence within that run, not a date code.
| Prefix | Identifies | Notes |
|---|---|---|
| RJS | D9T, original production block | Earliest documented D9T prefix, tied to the 2004 launch that replaced the D9R. Assembled in the USA. Uses the Cat C18 ACERT engine with differential steering and a powershift transmission (three speeds forward, three reverse). Seen on units built from the mid-2000s into the early 2010s before later prefixes appear. Gross/net power varies slightly by build date and source within this run; treat exact hp as configuration-dependent. |
| TWG | D9T, later production block | Follows RJS in the production sequence, ahead of the Tier 4 Final changeover. Same C18 ACERT engine family and differential-steering powershift driveline as the rest of the D9T line. Units carrying this prefix turn up in the used market with high accumulated hours, consistent with a late-2000s to early-2010s build era. |
| NJH | D9T, production block between TWG and the Tier 4 REX block | Confirmed as a genuine D9T prefix by a dedicated service manual title and a separate operator/maintenance manual listing spanning TWG and NJH together. Exact placement in the build-year sequence is not documented in public sources; confirm build date with a dealer PIN lookup. |
| REX | D9T (and D9T WH waste-handling package), Tier 4 Final block | Latest documented D9T prefix, tied to units meeting US EPA Tier 4 Final / EU Stage IV emissions on the Cat C18 ACERT engine. Seen on both standard-configuration units (SU blade, twin tilt) and on D9T WH waste-handling dozers. Whether WH ever carried its own separate prefix versus sharing REX with standard-configuration units is not consistently documented; treat as varies by source. |
Frequently asked questions
What engine does the Caterpillar D9T use?
A Cat C18 ACERT diesel. Early (2004-era) D9T builds are Tier 3, rated 410 net hp (306 kW) at 1800 rpm with 464 hp (346 kW) gross. Machines updated around 2019 carry a Tier 4 Final C18 ACERT rated 436 net hp (325 kW) at 1800 rpm with a revised cooling package. Confirm the build era by serial prefix before ordering emissions or cooling parts.
What is the operating weight of the Caterpillar D9T?
Roughly 47.9 to 49 tonnes (105,600-108,000 lb), varying by configuration. Blade type, ripper fitment, and undercarriage options all shift the figure, so treat published weights as a range rather than one fixed number.
What replaced the Caterpillar D9T?
Caterpillar retired the D9T around 2020 in favor of a next-generation Cat D9 (no letter suffix), part of Cat's large-dozer lineup refresh. The new D9 keeps a C18 engine platform but adds a Duralink undercarriage, a torque converter with stator clutch, and updated electronics, targeting lower fuel and maintenance costs than the D9T.
What D9T owners discuss
What engine powers the D9T, and does it change across the production run?
All D9T track-type tractors use the Cat C18 ACERT diesel. Earlier Tier 2/Tier 3 configurations are rated around 306 kW (410 hp) gross. Later Tier 4 Final units keep the same C18 block but add a NOx Reduction System, diesel particulate filter, and SCR aftertreatment, with factory literature quoting a higher net rating for that emissions tier. Exact gross/net numbers vary by configuration and emissions tier, so match the rating plate to the specific serial range rather than assuming one figure covers the whole run.
What commonly causes a D9T to pull to one side or stop tracking straight?
Shop and owner consensus points to a short list, roughly in order of likelihood: steering clutch wear or a worn release bearing/cage, final drive imbalance (one side running noticeably hotter under load signals bearing damage or oil starvation), brake drag from incomplete release, and simple track tension mismatch between the two sides. Leakage inside the steering/brake control valve can mimic a slipping clutch, so pressure-testing each circuit before pulling a final drive apart avoids a needless teardown. Because this affects directional control, have your dealer verify the diagnosis before committing to a clutch or final drive repair.
How does the D9T undercarriage differ from a conventional in-line design, and what wear patterns show up?
The D9T uses Cat's elevated sprocket undercarriage, which separates the drive sprocket and final drive from the track roller frame so the sprocket rides above the track rather than in line with it. That isolates the drivetrain from ground shock and keeps more chain in contact with the ground for traction, which owners credit with longer component life versus a straight in-line undercarriage. Independent of the design, operators note that running in reverse loads bushings and sprockets far harder than forward travel, and that daily cleaning plus keeping correct track tension does more to stretch undercarriage life than the elevated geometry by itself.
What emissions-system quirks show up on Tier 4 Final D9T units?
On Tier 4 Final machines, the DPF/DEF system tends to throw codes fastest after long idle periods or extended storage. A recurring field story involves a D9T parked for an extended stretch coming back online with active emission alarms traced to a corroded or rusted DEF line splice and connector corrosion in the wiring harness, not an actual filter failure. Before assuming the particulate filter needs replacement, check DEF line connections and connector pins for corrosion first. The filter itself has a service interval measured in the thousands of hours, so a comparatively young machine throwing DPF codes usually points to a sensor or plumbing fault rather than a worn-out filter.
What electrical or sensor issues are known on the D9T, separate from actual mechanical wear?
Intermittent steering faults that drop the machine into a reduced-power or limp state are frequently traced to a sensor or wiring fault rather than a worn clutch pack, since the electronic controls monitor pressure and position signals and will pull power back if a reading looks wrong even when the hydraulics are healthy. Separately, machines fitted with Cat Grade with Slope Assist rely on an inertial/angle sensor calibration that is tuned per model, with the D8T and D9T calibrated differently for their own hydraulic geometry. That calibration can drift with time and use and needs periodic recalibration rather than being a one-time factory setting.
What do owners say about the powershift transmission and torque converter?
The D9T runs a planetary powershift transmission behind a torque converter, with Enhanced Auto Shift selecting gear and engine speed automatically based on load and desired ground speed. Cat's transmission/drive train oil is the specified fluid, and a longer-drain synthetic version exists for extended service intervals. Owners generally describe the powershift as durable when serviced on schedule; complaints tend to trace back to skipped filter changes or contaminated oil rather than the transmission itself wearing out early.
What should I check when buying a used D9T?
Beyond the usual leak-down and service-history checks, look closely at undercarriage wear since the elevated sprocket, idlers, and track links are the single biggest line item in a D9T's resale value. On Tier 4 Final units, ask for regen and derate history to confirm the emissions system has not been running in a degraded state. Cycle the steering fully left and right under load to rule out an intermittent limp-mode fault before you buy, and ask when the transmission/drive train oil and filters were last changed. Because the C18 shares its core design across marine, on-highway, and industrial applications where oil/coolant cross-contamination from cylinder liner wear has been reported elsewhere, a compression check and oil sample are cheap insurance on a high-hour unit. Have your dealer verify the emissions system and steering system health before finalizing a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific D9T part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.