Caterpillartrack-type tractor
Caterpillar D5G
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar D5G is a small track-type tractor, part of Cat's compact dozer class, built around the Cat 3046T turbocharged diesel, a six-cylinder engine rated at roughly 90 hp (67 kW) net power (about 99 hp gross). Operating weight runs approximately 8.9 to 9.3 tonnes (about 19,600 to 20,550 lb) depending on undercarriage configuration. Cat offered the D5G in Standard, XL, and LGP (low ground pressure) track configurations, all sharing a hydrostatic (Hystat) transmission with twin drive pumps and drive motors in place of a torque converter and power-shift gearbox. Production ran roughly from the early 2000s into the mid-2000s, with sources differing on the exact end year. The D5G followed the earlier D5C in Cat's small-dozer line and should not be confused with the unrelated new-generation D5 introduced decades later.
The D5G's biggest change from its D5C predecessor was the drivetrain: hydrostatic drive gave infinitely variable ground speed and true counter-rotation steering in place of clutch-and-brake steering, paired with a rotating-bushing track undercarriage meant to extend chain life over fixed-pin designs. Cat carried this hystat layout forward into later small-dozer generations with updated engines and emissions tiers, so the D5G sits as a transitional model between the older mechanical small dozers and today's small-dozer line. In the used and parts market, the D5G remains a common, affordable, maneuverable machine for grading, utility, and residential site work. Resale value hinges heavily on undercarriage condition and hydrostatic pump/motor health, and parts commonality with its D3G/D4G siblings keeps support reasonably available despite the machine's age.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar D5G specifications
Overview
| Series / production | G-series track-type tractor with hydrostatic drive. Built roughly 2001/2002 through 2007, positioned between the D5C and D5K in the small dozer line. |
| Identity note | Not the 2019-generation D5 (which uses a Cat C7.1 engine and mechanical/electronic drive). This is the earlier hydrostatic G-series machine; specs below apply only to that generation. |
| Configurations offered | Standard, XL, and LGP (low ground pressure) undercarriage/blade packages, all sharing the same engine and hydrostatic drivetrain. |
Engine
| Model | Cat 3046T: inline 6-cylinder, turbocharged, direct-injection diesel, liquid-cooled. Same engine across Standard, XL, and LGP packages. |
| Displacement | 5.0 L (305 cu in); bore 94 mm x stroke 119-120 mm (3.70 x 4.70-4.72 in). |
| Power | 99 hp (73.8 kW) gross / 90 hp (67.1 kW) net, rated at approximately 2,200 rpm (one source lists 2,400 rpm). |
| Emissions | Reported to meet Tier 2 / Stage II non-road emissions for its build era; verify against the specific engine serial for exact certification. |
Weights (operating, by configuration)
| Standard (std shoes/blade) | 9,320 kg (20,547 lb). |
| XL package | 8,919 kg (19,662 lb). |
| LGP package (wide shoes/blade) | 9,269 kg (20,434 lb). |
| Note | Operating weight tracks the shoe width and blade fitted rather than a separate chassis casting; figures above are the commonly published weight for each factory package. |
Dimensions (by configuration)
| Length with blade - Standard/XL | 4,336 mm (14.23 ft). |
| Length with blade - LGP | 4,252 mm (13.96 ft). |
| Length without blade - all configs | 3,186 mm (10.45 ft). |
| Width over tracks - Standard/XL | 2,059-2,073 mm (6.76-6.80 ft), depending on source. |
| Width over tracks - LGP | 2,387 mm (7.83 ft). |
| Height to top of cab - all configs | 2,728 mm (8.95-8.96 ft). |
| Ground clearance - all configs | 384 mm (1.26 ft). |
| Track gauge - Standard/XL | 1,549 mm (5.09 ft). |
| Track gauge - LGP | 1,727 mm (5.67 ft). |
| Track shoe width - Standard/XL | 508 mm (20 in). |
| Track shoe width - LGP | 660 mm (26 in). |
| Track length on ground - Standard/XL | 2,310 mm (7.58 ft); not separately documented for LGP. |
Performance
| Transmission | Hydrostatic drive, stepless and continuously variable in both directions (no stepped gear ratios). |
| Travel speed, forward - all configs | 0-9.0 km/h (0-5.6 mph). |
| Travel speed, reverse - all configs | 0-9.6 km/h (0-6.0 mph). |
| Ground pressure - Standard/XL | 37 kPa (5.4 psi). |
| Ground pressure - LGP | 30-31 kPa (4.3-4.4 psi). |
| Ground contact area - Standard/XL | 2.36 sq m (3,663 sq in). |
| Ground contact area - LGP | 3.06 sq m (4,741 sq in). |
| Drawbar pull | Not published for this model/configuration in available spec sources; request dealer figures if needed for load or towing calculations. |
| Gradeability | Not documented in available spec sources for this model. |
| Hydrostatic system relief pressure | 20 MPa (2,900 psi). |
| Hydrostatic pump flow | 61-67 L/min (16.1-17.6 US gpm), varies by source. |
Blades
| Standard/XL dozing blade (VPAT) | Variable Pitch, Angle, Tilt (VPAT) moldboard, the sole factory blade type for this model. Width 2,690 mm (8.9 ft); height 1,101 mm (43.4 in); capacity approximately 2.2 cu m (2.9 cu yd); cutting depth 630 mm (24.8-24.9 in); angles 25 degrees each direction; pitch adjusts via a tool-free turnbuckle link. |
| LGP wide dozing blade (VPAT) | Variable Pitch, Angle, Tilt (VPAT) moldboard sized for the LGP undercarriage. Width 3,254 mm (10.7 ft); height 1,028 mm (40.5 in); capacity approximately 2.4 cu m (3.1 cu yd); cutting depth 582 mm (22.9 in); angles 25 degrees each direction. |
| Blade options note | VPAT is the only factory blade type offered on the D5G; width and capacity scale with the undercarriage configuration (Standard/XL, an intermediate width, LGP, and a narrower option). No separate straight, semi-U, U, or fixed-angle blade choice exists for this model. |
Service capacities
| Fuel tank - all configs | 184 L (48.6 US gal). |
| Cooling system | 16-17 L (4.3 US gal); one source lists roughly 21 L (22 US qt) - confirm against the specific engine serial. |
| Engine oil, crankcase with filter | 12.9-13.6 L (3.4 US gal). |
| Hydraulic/hydrostatic system tank | 45.5 L (12 US gal). |
| Final drives, per side | 15-22 L (3.9-5.7 US gal), varies by configuration; not separately published for the Standard package. |
Optional equipment
| Rear ripper | Parallelogram-type ripper offered; maximum penetration about 338 mm (13.3 in), maximum reach about 610 mm (24 in). |
| Winch | Hydrostatic-drive variable-speed winch offered; drum diameter 254 mm (10 in); rated line pull tapers from roughly 178 kN (40,000 lb) bare drum to about 111 kN (25,000 lb) full drum. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D5G fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3046T | 12.9 L (3.4 US gal) | Cat DEO diesel engine oil, SAE 15W-40 for roughly -18°C to 40°C (0°F to 104°F); SAE 10W-30 acceptable over a similar range for easier cold starts. Full-synthetic Cat DEO-ULS SYN or Cat Arctic DEO SYN where sustained ambient runs below about -20°C (-4°F). |
| Cooling system | 16.1 L (4.3 US gal) | Cat DEAC (Diesel Engine Antifreeze/Coolant), pre-mixed near 50/50 with water for about -37°C (-34°F) freeze protection. Cat ELC (Extended Life Coolant) accepted where an extended-service coolant is specified. |
| Fuel tank | 184 L (48.6 US gal) | No. 2-D diesel fuel meeting the sulfur-content requirement for the engine's build date/emissions tier; low- or ultra-low-sulfur diesel per regional fuel spec. |
| Power train and hydraulic system (combined tank, Hystat drive) | 45.5 L (12.0 US gal) | Cat TDTO (Transmission/Drive Train Oil). Grade by ambient temperature: SAE 10W below about 0°C (32°F), SAE 30 for roughly 0-35°C (32-95°F), SAE 50 for sustained high heat. One reservoir supplies both the hydrostatic drive pumps/motors and the implement hydraulic circuit on this Hystat-drive dozer — there is no separate bevel-gear/steering-clutch compartment like the older powershift small dozers used. |
| Final drive, each — XL undercarriage | 14.8 L (3.9 US gal) | Cat TDTO, same viscosity-by-ambient selection as the power train/hydraulic tank. |
| Final drive, each — LGP undercarriage | 21.6 L (5.7 US gal) | Cat TDTO, same viscosity-by-ambient selection as the power train/hydraulic tank. |
| Grease points (track roller frame, idlers, blade lift/tilt and linkage pins) | Applied by grease gun at individual fittings; no reservoir capacity | Cat Multipurpose Grease (MPGM), NLGI 2, for normal ambient service. Cat Advanced 3Moly Grease for heavily loaded pivot pins. Cat Arctic Platinum Grease where the machine works in sustained sub-zero cold. |
| Pivot shaft | Not documented as a separate lube point for this model | Not applicable. The D5G small-dozer track roller frame is rigidly mounted, with no oscillating equalizer/pivot-shaft oil compartment like larger cable-steer dozers. Frame and linkage pins are grease-lubricated — see grease row. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar D5G maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the D5G beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled oil sampling on the 3046T engine, hydrostatic transmission, and final drives to catch wear before it causes downtime. Rising iron or copper in hydrostatic oil samples signals drive pump or motor wear starting, and catching it early is far cheaper than a mid-life pump replacement. Track coolant condition to protect the turbocharged engine's components, and watch fuel filter change frequency as an early sign of tank or injector contamination. On a hydrostatic dozer like the D5G, oil analysis catches drivetrain problems long before symptoms show up in the seat.
Corrective & Common Repairs
Undercarriage wear is the D5G's most common high-dollar repair; the rotating-bushing track system still wears out tracks, idlers, and sprockets over time, and a full undercarriage replacement is a major expense on this size class. Hydrostatic drive pump and motor seals are another common leak point on higher-hour machines. The 3046T's turbocharger can develop shaft play or oil seepage, showing up as blue smoke or lost power. Check final drive seals whenever oil level drops unexpectedly.
Overhaul & Rebuild Points
At higher hours, the hydrostatic drive pumps and motors are the D5G's key rebuild point; efficiency loss here shows up as sluggish response or reduced pushing power before outright failure. Undercarriage rebuild (tracks, rollers, idlers, sprockets) typically comes due in the same wear window as pump service, so many owners plan both together. The 3046T can go to an in-frame overhaul (liners, pistons, rings, bearings) once oil analysis shows rising wear trends, keeping the block in service instead of a full engine replacement.
Seasonal & Environment Servicing
Cold-weather starts on the 3046T benefit from checking glow plug or ether-start function and confirming coolant freeze protection before winter. Fuel system water separators need more frequent draining in freeze-thaw conditions to prevent gelling and injector damage. In hot, dusty environments, check the air filter primary element more often than the standard interval and inspect the radiator core for packed debris that cuts cooling to the hydrostatic drive's oil cooler circuit. Recheck track tension after ground conditions shift from frozen to thawed or muddy.
D5G common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 237-5398 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 180-5474 | Filter Element As-Air | Air intake service | Check fitment → |
| 180-5475 | Filter Element As-Air | Air intake service | Check fitment → |
| 183-2813 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D5G fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0482-03 (displayed as E482) | Left track: unexpected forward movement detected by the Hystat transmission ECM | Left track speed sensor circuit open or shorted to a high voltage source; on some configurations the CID itself does not strictly apply and only the FMI 3 condition (sensor circuit fault) is the real issue | Inspect the left track speed sensor connector and harness for damage or corrosion, test sensor output, replace the sensor if faulty, then recalibrate the hydrostatic drivetrain with the Cat service tool |
| CID 0484-03 (displayed as E484) | Left track: unexpected reverse movement detected by the Hystat transmission ECM | Left track speed sensor circuit open or shorted to a high voltage source, same sensor family as CID 0482 | Check the same left track speed sensor and wiring, replace the sensor if it fails a resistance/output test, then recalibrate the drivetrain with the Cat service tool |
| CID 0681-05 | Parking brake release solenoid: current below normal, open circuit | Solenoid coil failed open, corroded or broken connector, or a break in the solenoid wiring; ECM failure is possible but far less common | Expect the parking brake to stay continuously engaged with this code active; check solenoid coil resistance and connector condition, repair or replace wiring/solenoid, confirm ECM output voltage before condemning the module |
| CID 0070-02 | Parking brake rocker switch: signal erratic, intermittent, or incorrect | Worn or dirty switch contacts, chafed harness near the switch, or moisture intrusion at the switch connector | Test the rocker switch for clean continuity in both positions, inspect and clean the connector, replace the switch if contacts fail the test |
| CID 0190-08 | Engine speed sensor: abnormal frequency, pulse width, or period | Sensor air gap out of adjustment, damaged sensor tip, flywheel timing-ring damage, or wiring routed too close to a source of electrical interference | Check and reset the sensor air gap per the service manual, inspect wiring shielding and routing, replace the sensor if the signal stays erratic after adjustment |
| CID 0468-03 | Service brake pedal position sensor: voltage above normal, shorted high | Sensor circuit shorted to a power source, internal sensor failure, or the sensor is out of calibration | Inspect the pedal position sensor wiring for a short to power, run the pedal calibration procedure with the Cat service tool, replace the sensor if the fault does not clear |
| CID 1705-05 | Hydrostatic pump/motor proportional solenoid valve: current below normal, open circuit (one of the proportional solenoid valve codes covering the pump and motor swashplate controls) | Solenoid coil open, damaged or corroded connector, or a broken wire between the ECM and the solenoid | Measure solenoid coil resistance, inspect the connector, repair or replace the solenoid, then recalibrate the drivetrain after the repair |
| CID 0041-01 | 8 DCV sensor power supply: voltage below normal operating range | Low battery state of charge or a charging system fault, corroded ECM or sensor grounds, or a fault in the ECM's own supply circuit; this control system is sensitive to supply voltage | Check battery condition and charging system output first, inspect ECM and sensor ground connections for corrosion, retest supply voltage before replacing any sensor fed by this circuit |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D5G attachments & work tools
Blades
The D5G (G-series hydrostatic dozer, introduced around 2001) ships with one blade type, the Variable Pitch, Angle and Tilt (VPAT) moldboard; factory literature for this model lists no separate S, SU, or A blade choice, only VPAT in several width/capacity configurations. Capacity scales with undercarriage: XL tracks carry a 2.19 cu m (2.9 cu yd) blade 2690 mm (106 in) wide, an intermediate-width option uses a 2.09 cu m blade at 2921 mm (115 in), and LGP undercarriage takes the largest 2.34 cu m (3.1 cu yd) blade at 3254 mm (128 in) wide; a narrower 1.43 cu m, 2456 mm (97 in) blade is also offered across all three undercarriage widths. Blade angle runs to 25 degrees either side, cutting-edge pitch adjusts between 50 and 55 degrees through a tool-free turnbuckle link, and blade tilt travel ranges roughly 369-471 mm depending on width. A forestry-spec VPAT blade matches the XL capacity and width (2.19 cu m, 2690 mm) but adds extra debris guarding and a thicker moldboard, close to 45 percent heavier than the standard XL blade.
Rippers
The D5G's factory rear ripper is a parallelogram-linkage, three-shank unit with spec shared across the D3G/D4G/D5G family; a single-shank ripper is not offered as a factory option for this small-tractor class. Maximum digging depth is 337 mm (13.3 in), reach at ground line is 615 mm (24.2 in), and ground clearance under the tip is 412 mm (16.2 in); overall width is about 1710 mm (67 in). The assembled ripper, shanks and tips included, weighs roughly 563 kg (1,240 lb); fitting it requires the optional 4-valve, 1-lever dozer-control hydraulic arrangement to run the raise/hold/lower ripper circuit.
Winches
Cat's G-series hydrostatic winch fits the D3G, D4G and D5G alike, one shared spec sheet covers all three tractors in this under-100-hp class. It runs off its own closed-loop hydrostatic pump/motor rather than a mechanical clutch-and-brake drive, giving infinitely variable line speed and pull instead of a fixed gear ratio. Bare-drum maximum line pull is about 18,144 kg (40,000 lb), dropping to roughly 11,340 kg (25,000 lb) full-drum; line speed runs 40 m/min bare drum up to 63 m/min full drum, and the drum holds 113 m of 16 mm recommended rope or 78 m of 19 mm optional rope. The winch itself weighs about 610 kg (1,345 lb) before a roughly 69 kg pump/lines/filter/control-lever install kit; a 3-roller fairlead, expandable to 4-roller, is available, and the winch carries its own integral mounted drawbar.
Drawbars/counterweights
A bolt-on towing drawbar around 13 kg (29 lb) is available for rear-hitch towing work, separate from the winch's built-in drawbar. Front counterweight is optional at about 289 kg (637 lb) to help balance loads from a rear-mounted ripper or winch. Idler-mounted counterweight is listed for the D3G/D4G siblings in factory literature but is not called out as a separate D5G line item; idler rock guards for the D5G run about 31 kg (68 lb) and track-roller guards about 99 kg (218 lb), both aimed at undercarriage protection rather than added ballast.
Cab/ROPS guarding (forestry/waste)
Standard protection is a ROPS canopy meeting ISO 3471-1994 rollover criteria and ISO 3449-1992 Level II falling-object criteria; an enclosed ROPS cab with air conditioning, cloth comfort seat and 110-amp alternator is optional, adding about 403 kg (889 lb). For forestry/logging work Caterpillar offers a dedicated logging ROPS cab package, about 606 kg (1,336 lb), with polycarbonate door glazing and screens for all-around visibility with impact protection; a screened, hinged-door canopy version with a door dampening device and side/rear screen guarding is also available, built to meet OSHA and WCB screening requirements. A logging sweep option (about 133 kg / 293 lb) and heavy-duty grill (about 16 kg) add further debris protection, and a sandblast-rated radiator grid (about 12 kg) suits abrasive waste or demolition duty; the forestry-spec blade itself carries the extra guarding and thicker moldboard noted above.
Hydraulic arrangement (front/rear tools)
Standard blade hydraulics run a 3-valve circuit off a single lever with three functions, lift, angle and tilt, at 61.1 L/min pump output and a 20,000 kPa relief setting; blade pitch is set manually through the turnbuckle link, not hydraulically. Adding a rear work tool needs the upgraded 4-valve, 1-lever arrangement to bring in a fourth hydraulic function: one calibration serves the ripper's raise/hold/lower circuit, a separate calibration serves the winch control lever, so ripper and winch share the same rear valve slot and are not both run from the standard factory arrangement at once. The winch's own drive is a separate closed-loop hydrostatic pump/motor circuit, with its own pump, lines and filter kit, independent of the blade/ripper implement hydraulics, similar in principle to the tractor's dual-path hydrostatic track drive.
All D5G assemblies by section
Every catalogued assembly group for the Caterpillar D5G. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
213-6397 Air Cleaner Gp
| 10***01 | Tube | 1 |
| 13***79 | Precleaner Group; -Turbine | 1 |
| 14***67 | Clamp; (Hose) | 2 |
180-5459 Air Cleaner Gp
| 18***59 | Air Cleaner Group | 1 |
| 18***74 | Filter Element As-Air; (Primary) | 1 |
| 18***75 | Filter Element As-Air; (Secondary) | 1 |
176-1173 Manifold Gp-Exhaust
| 10***09 | Gasket | 1 |
| 17***73 | Manifold Group-Exhaust | 1 |
| 17***75 | Manifold-Exhaust | 1 |
206-4122 Muffler Gp
| 10***64 | Gasket | 1 |
| 15***41 | Manifold-Inlet | 1 |
| 20***22 | Muffler Group | 1 |
206-4125 Muffler Gp
| 09***66 | Bolt; (M8x1.25x75-mm) | 3 |
| 11***51 | Spacer; (10.5x18x53.5-mm Thk) | 1 |
| 1W***30 | Clamp-V-Band | 1 |
130-3279 Precleaner Gp -Turbine
| 09***66 | Bolt; (M8x1.25x75-mm) | 3 |
| 11***51 | Spacer; (10.5x18x53.5-mm Thk) | 1 |
| 13***79 | Precleaner Group; -Turbine | 1 |
219-1463 Turbocharger Gp
| 17***14 | Clamp; (T'Bolt) | 1 |
| 21***63 | Turbocharger Group | 1 |
Basic Engine
106-8228 Camshaft Gp
| 09***28 | Key | 1 |
| 10***28 | Camshaft Group | 1 |
| 10***69 | Camshaft As | 1 |
196-3831 Cover Gp-Valve Mechanism
| 10***69 | Gasket; (Valve Cover) | 1 |
| 11***75 | Cap; (Oil Fill) | 1 |
| 19***31 | Cover Group-Valve Mechanism | 1 |
106-8231 Crankshaft Gp
| 08***13 | Pin | 1 |
| 09***28 | Key | 1 |
| 10***88 | Plate-Thrust; (Standard) | 3 |
201-1037 Cylinder Block As
| 09***41 | Cap | 9 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
106-8230 Cylinder Block Gp
| 10***79 | Seal-Side | 2 |
| 10***30 | Cylinder Block Group | 1 |
| 12***11 | Kit-Jacket Water Heater | 1 |
106-8249 Cylinder Head Gp
| 09***35 | Plug-Drain | 2 |
| 10***66 | Plug-Cup | 12 |
| 10***82 | Spring | 12 |
116-6714 Flywheel Gp
| 11***14 | Flywheel Group | 1 |
| 12***98 | Flywheel As | 1 |
| 14***16 | Bolt; (M12x1.25x40-mm) | 6 |
220-0119 Gear Gp-Front
| 10***75 | Gear As-Idler; (57-Teeth) | 1 |
| 10***76 | Gear-Hydraulic Pump Drive; (31-Teeth) | 1 |
| 10***74 | Gear; (46-Teeth) | 1 |
116-6717 Housing Gp-Flywheel
| 09***24 | Stud | 3 |
| 10***80 | Gasket-Rear | 1 |
| 10***99 | Bolt (30mm Long) | 2 |
106-8252 Housing Gp-Front
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 10***71 | Cover-Timing | 1 |
106-8236 Lifting Gp-Engine
| 10***36 | Lifting Group-Engine; (Engine) | 1 |
| 23***94 | Gasket | 1 |
| 23***87 | Eye-Lifting; (Front Head) | 1 |
195-9871 Pan Gp-Oil
| 10***81 | Gasket | 2 |
| 10***06 | Gasket; (Engine Oil Pan) | 1 |
| 11***69 | Plug | 1 |
220-0118 Piston & Rod Gp
| 10***80 | Rod As-Connecting | 6 |
| 10***83 | Bearing-Connecting Rod | 12 |
| 10***84 | Bearing-Connecting Rod; (0.25-mm Us) | 12 |
106-8251 Pulley Gp-Crankshaft
| 09***28 | Key | 1 |
| 10***51 | Pulley Group-Crankshaft | 1 |
| 10***68 | Pulley | 1 |
229-1550 Pulley Gp-Fan
| 22***50 | Pulley Group-Fan | 1 |
| 22***51 | Pulley | 1 |
| 6L***61 | V-Belt Set | 1 |
199-6927 Support Gp-Engine
| 10***54 | Support As; (Rh) | 1 |
| 11***50 | Support As; (Lh) | 1 |
| 19***27 | Support Group-Engine | 1 |
233-4842 Support Gp-Engine & Xmsn
| 10***54 | Support As; (Rh) | 2 |
| 19***28 | Plate As | 2 |
| 19***29 | Plate As | 2 |
106-8238 Valve Mechanism Gp
| 10***65 | Plug-Rocker Arm Shaft | 2 |
| 10***67 | Bracket-Rocker Arm Shaft | 6 |
| 10***68 | Bolt-Rocker Bracket | 6 |
Cooling System
106-8262 Cooler Gp-Engine Oil
| 10***62 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
| 10***67 | Cooler-Oil; (Engine) | 1 |
| 19***89 | Gasket | 1 |
227-5720 Fan Gp-Blower
| 22***90 | Guard As-Fan | 1 |
| 22***35 | Guard As-Fan | 1 |
| 22***02 | Fan As-Blower; (7-Blade) | 1 |
116-6725 Lines Gp-Water
| 09***69 | Cover-Thermostat | 1 |
| 10***04 | Gasket; (Thermostat) | 1 |
| 11***50 | Gasket | 1 |
116-6724 Pump Gp-Water
| 11***24 | Pump Group-Water; (Water) | 1 |
| 11***32 | Gasket-Water Pump | 1 |
| 11***33 | Pump As-Water | 1 |
200-7910 Radiator & Hyd Oil Cooler Gp
| 14***09 | Tube; (1-M) | 0 |
| 17***29 | Hose-Radiator; (Upper) | 1 |
| 20***10 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
183-6321 Alternator Gp-Charging
| 11***10 | Gasket-Screen; (Hydraulic Tank) | 1 |
| 11***11 | Cover | 1 |
| 18***21 | Alternator Group-Charging; -Open Rops | 1 |
203-5492 Alternator Gp-Charging
| 13***77 | Strap As | 1 |
| 14***51 | Plate As | 1 |
| 20***92 | Alternator Group-Charging | 2 |
184-5295 Battery & Wiring Gp
| 11***58 | Pulley-Alternator | 1 |
| 11***65 | Kit-Alternator Bearing | 1 |
| 11***66 | Kit-Repair; (Alternator Brushes) | 1 |
242-7206 Control Gp-Communication -Product Link
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
168-7314 Control Gp-Unprogrammed -Product Link 201
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 2 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
213-6399 Electronics Gp-Machine
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
213-6400 Electronics Gp-Machine
| 21***00 | Electronics Group-Machine | 2 |
207-5262 Electronics Gp-Machine -Security
| 17***39 | Screw; (8-32x0.5-In) | 4 |
| 20***62 | Electronics Group-Machine | 1 |
| 2L***75 | Terminal; (14-Ga To 16-Ga, No. 8 Screw)(Relay Switch "B" & "S") | 1 |
223-3393 Grade Control Ar -Laser
| 22***93 | Grade Control Ar; -Laser | 1 |
| 27***13 | Software Group-Machine | 1 |
| 28***79 | Service Group-Machine | 1 |
261-9456 Grade Control Ar -Accugrade
| 18***26 | Hitch Group-Towing; -Towing | 1 |
| 22***96 | Mounting Group-Grade Control | 1 |
| 22***02 | Wiring Group-Grade Control | 1 |
265-8157 Grade Control Ar -Accugrade
| 24***44 | Wiring Group-Grade Control; -Global Positioning System | 1 |
| 26***65 | Mounting Group-Connector; -Blade Wiring | 1 |
| 26***69 | Mounting Group-Antenna; -Open Rops | 1 |
290-5569 Grade Control Ar-Laser -Accugrade, Dual
| 22***98 | Kit-Bracket; (Grade Control) | 1 |
| 22***33 | Mast Group; -Laser Receiver | 2 |
| 22***34 | Receiver Group-Laser; (Lr400c) | 2 |
231-5308 Grade Control Ar-Laser -Accugrade, Single
| 17***32 | Control Group-Hydraulic Hand; -Ripper | 1 |
| 19***82 | Lines Group-Rear Attachment | 1 |
| 22***96 | Mounting Group-Grade Control | 1 |
231-5309 Grade Control Ar-Laser -Accugrade, Dual
| 22***98 | Kit-Bracket; (Grade Control) | 1 |
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 22***34 | Receiver Group-Laser; (Lr400c) | 1 |
292-0282 Grade Control Ar-Laser -Accugrade, Single
| 22***98 | Kit-Bracket; (Grade Control) | 1 |
| 22***33 | Mast Group; -Laser Receiver | 2 |
| 23***70 | Mounting Group-Receiver; -Mast | 2 |
290-5571 Grade Control Ar-Satellite -Accugrade, Dual Gnss
| 25***36 | Cable-Coiled; (Receiver) | 2 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
| 28***37 | Receiver Group-Satellite; -Dual Gps, Ms980-Accugrade | 1 |
292-0280 Grade Control Ar-Satellite -Accugrade, Single Gnss
| 25***36 | Cable-Coiled; (Receiver) | 1 |
| 25***51 | Cable-Coiled; (Angle Sensor) | 1 |
| 27***46 | Sensor As-Position; (As400tc)(Angle) | 1 |
292-0279 Grade Control Ar-Satellite -Accugrade, Single Gps
| 24***00 | Mast As; (Satellite Receiver) | 2 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
| 28***24 | Display Group-Monitor; -Light Bar | 3 |
259-4747 Grade Control Ar-Satellite -Accugrade, Dual Gps
| 22***98 | Kit-Bracket; (Grade Control) | 1 |
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
290-5570 Grade Control Ar-Satellite -Accugrade, Dual Gps
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
267-6702 Grade Control Ar-Satellite -Upgrade From Laser To Gps
| 15***86 | Screw; (M4x0.7x16-mm) | 6 |
| 15***83 | Bolt-Socket Head; (M6x1x70-mm) | 2 |
| 19***31 | Adapter; (Compact) | 1 |
194-1967 Heater Gp-Jacket Water
| 19***67 | Heater Group-Jacket Water | 1 |
| 24***00 | Mast As; (Satellite Receiver) | 1 |
| 27***46 | Sensor As-Position; (As400tc)(Angle) | 1 |
221-5272 Installation Gp-Communication -Product Link
| 20***17 | Control Group-Communication; -Product Link 201 | 1 |
| 22***72 | Installation Group-Communication; -Product Link | 2 |
257-0430 Installation Gp-Communication -Radio, Product Link
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
207-6795 Installation Gp-Communication -Product Link
| 13***64 | Element-Heating | 1 |
| 13***65 | Receptacle As | 1 |
| 16***11 | Screw-Pan Head; (10-32x1-In) | 2 |
211-1086 Installation Gp-Communication -Product Link 201
| 21***86 | Installation Group-Communication; -Product Link 201 | 1 |
| 22***72 | Installation Group-Communication; -Product Link | 1 |
| 24***06 | Control Group-Communication; -Product Link | 1 |
257-0428 Installation Gp-Communication -Product Link 121sr
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 7 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
211-1085 Installation Gp-Communication -Product Link 151
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 17***42 | Harness As-Control; (Product Link) | 1 |
243-1157 Installation Gp-Security
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
184-5299 Installation Gp-Security
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
237-5920 Installation Gp-Security -Machine Security System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 7 |
201-1422 Lamp Gp-Flood -Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
201-1423 Lamp Gp-Flood -Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
144-9933 Lamp Gp-Panel Illumination -Backlight
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
183-4270 Lighting Gp-Flood -Erops
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
183-4269 Lighting Gp-Flood -Orops
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***69 | Lighting Group-Flood; -Orops | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
226-2333 Mast Gp -Laser Receiver
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
292-0290 Mast Gp -Satellite Receiver
| 24***47 | Kit-Adapter; (Mast)(Grade Control) | 1 |
| 25***79 | Screw As | 1 |
| 25***80 | Motor As | 1 |
261-0165 Mounting Gp-Connector -Blade Wiring
| 24***00 | Mast As; (Satellite Receiver) | 1 |
| 26***65 | Mounting Group-Connector; -Blade Wiring | 1 |
| 29***03 | Mounting Group-Mast; -Satellite Receiver | 1 |
223-3396 Mounting Gp-Grade Control
| 22***96 | Mounting Group-Grade Control | 1 |
| 26***66 | Cover As | 1 |
| 26***58 | Plate | 1 |
292-0296 Mounting Gp-Grade Control
| 22***25 | Mounting Group-Monitor; -Grade Control | 1 |
| 22***69 | Module As-Power Supply | 1 |
| 22***82 | Mounting Group-Control; -Valve Interface Module | 1 |
226-9168 Mounting Gp-Receiver -Mast
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 6 |
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 2 |
| 22***68 | Mounting Group-Receiver; -Mast | 1 |
234-9970 Mounting Gp-Receiver -Mast
| 18***26 | Rod-Threaded | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 23***30 | Bracket | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 23***32 | Mount-Flexible | 4 |
| 23***33 | Gasket | 2 |
| 23***34 | Clamp | 1 |
234-9974 Receiver Ar-Laser -Upgrade From Single To Dual
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 22***34 | Receiver Group-Laser; (Lr400c) | 1 |
| 22***67 | Adapter; (Receiver) | 1 |
252-9699 Receiver Ar-Laser -Upgrade From Single To Dual
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 22***34 | Receiver Group-Laser; (Lr400c) | 1 |
| 22***67 | Adapter; (Receiver) | 1 |
292-0285 Receiver Gp-Laser -Accugrade, Dual
| 27***64 | Cable-Coiled; (Laser Receiver) | 1 |
| 29***85 | Receiver Group-Laser; -Accugrade, Dual | 1 |
| 34***59 | Receiver As-Laser | 1 |
292-0292 Receiver Gp-Satellite -Accugrade, Single Gnss, Ms992
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
292-0291 Receiver Gp-Satellite -Accugrade, Dual Gnss, Ms992
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
286-0137 Receiver Gp-Satellite -Dual Gps, Ms980
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 2 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
300-2118 Receiver Gp-Satellite -Accugrade, Upgrade From Gps To Gnss
| 29***13 | Receiver As-Satellite; (Gnss, Ms990) | 1 |
| 30***18 | Receiver Group-Satellite; -Accugrade, Upgrade From Gps To Gnss | 1 |
286-0136 Receiver Gp-Satellite -Single Gps, Ms980
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
160-2443 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
266-1467 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
183-4584 Sensor Gp-Speed
| 18***84 | Sensor Group-Speed | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
191-6587 Sensor Gp-Temperature
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
219-0705 Starting Aid Gp
| 10***53 | Elbow | 1 |
| 16***14 | Heater | 1 |
| 16***15 | Elbow As | 1 |
210-6219 Starting Aid Gp-Ether
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
105-9804 Starting Motor Gp-Electric
| 10***33 | Starting Motor Group-Electric | 1 |
| 10***04 | Starting Motor Group-Electric | 1 |
| 3K***57 | Gasket | 1 |
105-3133 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***33 | Starting Motor Group-Electric | 1 |
| 10***61 | Frame-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
183-4268 Warning Gp-Backup -Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***68 | Warning Group-Backup; -Rear | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
194-2469 Wiring Gp-Air Conditioner
| 10***74 | Seal-Connector | 2 |
| 10***04 | Suppressor As-Arc | 1 |
| 12***40 | Terminal-Socket | 2 |
238-7418 Wiring Gp-Cab
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
184-5294 Wiring Gp-Engine & Xmsn
| 09***97 | Switch-Oil Pressure; (Engine) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
223-3402 Wiring Gp-Grade Control
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
249-9044 Wiring Gp-Grade Control -Global Positioning System
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
196-6863 Wiring Gp-Heater
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
210-4624 Wiring Gp-Hood
| 10***74 | Seal-Connector | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
184-5292 Wiring Gp-Platform
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
Engine Arrangement
211-3012 Engine Ar-Primary
| 10***04 | Starting Motor Group-Electric | 1 |
| 10***28 | Camshaft Group | 1 |
| 10***30 | Cylinder Block Group | 1 |
280-6718 Engine Ar-Primary
| 10***04 | Starting Motor Group-Electric | 1 |
| 10***28 | Camshaft Group | 1 |
| 10***30 | Cylinder Block Group | 1 |
213-6391 Installation Ar-Engine
| 14***46 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 18***59 | Filler Group-Engine Oil | 1 |
| 19***27 | Support Group-Engine | 1 |
Frame And Body
223-4328 Case & Frame Gp -Lgp
| 12***43 | Seal; (70-cm) | 0 |
| 17***71 | Bracket | 2 |
| 20***27 | Enclosure As; (Rh) | 1 |
223-4327 Case & Frame Gp -Xl
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
| 21***28 | Counterweight; (281.11-Kg, Front) | 1 |
| 21***29 | Plate | 2 |
216-8327 Counterweight Gp-Front
| 12***43 | Seal; (70-cm) | 0 |
| 17***62 | Enclosure As; (Rh) | 1 |
| 17***71 | Bracket | 2 |
201-2126 Enclosure Gp-Platform
| 20***26 | Enclosure Group-Platform | 1 |
174-5865 Enclosure Gp-Rear
| 17***65 | Enclosure Group-Rear | 1 |
| 22***42 | Grill As | 1 |
216-1306 Grill Gp-Radiator -Heavy Duty
| 18***19 | Guard As-Rear | 1 |
| 21***06 | Grill As; -Heavy Duty | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
221-8653 Grill As-Radiator
| 15***35 | Cover | 2 |
| 17***11 | Guard As-Bottom; (Rear) | 1 |
| 21***41 | Spacer; (13.9x21.3x8-mm Thk) | 12 |
174-5873 Guard Gp-Bottom
| 17***73 | Guard Group-Bottom | 1 |
| 18***24 | Guard As; (Lh) | 1 |
| 18***29 | Guard As; (Rh) | 1 |
190-1190 Guard Gp-Brush -Side
| 13***75 | Keeper | 1 |
| 18***31 | Hinge | 2 |
| 18***32 | Guard As-Rear | 1 |
190-1195 Guard Gp-Brush -Front Access
| 12***18 | Seal; (1000-cm) | 0 |
| 19***95 | Guard Group-Brush; -Doors & Front | 1 |
| 22***55 | Guard As | 1 |
184-1623 Guard Gp-Brush -Side
| 10***71 | Clevis | 1 |
| 10***90 | Bolt; (M6x1x25-mm) | 8 |
| 11***84 | Bumper | 10 |
184-1621 Guard Gp-Brush -Rear
| 18***21 | Guard Group-Brush; -Rear | 1 |
| 19***91 | Guard As-Side; (Rh) | 1 |
| 19***92 | Guard As-Side; (Lh) | 1 |
190-1200 Guard Gp-Brush -Rear
| 12***18 | Seal; (1000-cm) | 0 |
| 19***00 | Guard Group-Brush; -Rear | 1 |
| 22***55 | Guard As | 1 |
220-0254 Guard Gp-Radiator
| 11***52 | Screw; (M8x1.25x30-mm) | 2 |
| 22***54 | Guard Group-Radiator | 1 |
| 22***11 | Plate | 1 |
228-0548 Guard Gp-Radiator
| 11***52 | Screw; (M8x1.25x30-mm) | 1 |
| 22***48 | Guard Group-Radiator | 1 |
| 23***26 | Boss; (1-1/8-18x0.708-In) | 1 |
261-9455 Guard Gp-Radiator
| 18***27 | Hitch As | 1 |
| 26***55 | Guard Group-Radiator | 1 |
| 5G***92 | Pin | 1 |
180-6626 Hitch Gp-Towing
| 17***82 | Support As | 2 |
| 18***26 | Hitch Group-Towing; -Towing | 1 |
| 18***67 | Panel As; (Rh) | 1 |
174-5864 Hitch Gp-Towing
| 17***64 | Hitch Group-Towing | 1 |
| 17***83 | Panel As; (Rh) | 1 |
| 17***84 | Panel As; (Lh) | 1 |
227-5711 Hood & Guard Gp -Sound Suppressed
| 18***46 | Liner | 1 |
| 18***33 | Liner | 1 |
| 18***34 | Liner | 1 |
174-5876 Hood & Guard Gp
| 17***76 | Hood & Guard Group | 1 |
| 18***67 | Panel As; (Rh) | 1 |
| 18***68 | Panel As; (Lh) | 1 |
227-5708 Liner Gp-Sound Suppression -Frame
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 20***25 | Muffler Group | 1 |
| 20***89 | Idler Group-Track; -Rh | 1 |
185-6345 Liner Gp-Sound Suppression -Cab
| 09***00 | Washer; (12.7x30x4-mm Thk) | 3 |
| 18***71 | Liner | 1 |
| 18***14 | Liner | 1 |
227-5706 Liner Gp-Sound Suppression -Guard
| 11***28 | Bolt; (M24x3x130-mm) | 4 |
| 17***19 | Support As | 1 |
| 17***39 | Cover | 1 |
174-5895 Support Gp-Platform
| 17***95 | Support Group-Platform | 1 |
| 20***25 | Muffler Group | 1 |
| 22***06 | Liner Group-Sound Suppression; -Guard | 1 |
222-5165 Suppression Ar-Sound
| 09***85 | Locknut; (M16x2-Thd) | 14 |
| 17***93 | Support As; (Rh) | 1 |
| 17***94 | Support As; (Lh) | 1 |
222-5169 Suppression Ar-Sound
| 09***85 | Locknut; (M16x2-Thd) | 14 |
| 17***93 | Support As; (Rh) | 1 |
| 17***94 | Support As; (Lh) | 1 |
213-8122 Sweep Gp -Enclosed Rops With Lights
| 09***85 | Locknut; (M16x2-Thd) | 14 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
213-8123 Sweep Gp -Open Rops With Lights
| 11***81 | Strip-Wear | 1 |
| 15***28 | Guard As; (Rh. Inner) | 2 |
| 15***30 | Guard As; (Rh. Outer) | 2 |
184-1620 Sweep Gp
| 09***85 | Locknut; (M16x2-Thd) | 14 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
Fuel System
276-2263 Cable Gp-Governor Control
| 10***38 | Turbocharger Group | 1 |
| 17***77 | Pipe-Drain | 1 |
| 17***48 | Hose | 1 |
213-6415 Lines Gp-Fuel
| 21***15 | Lines Group-Fuel | 1 |
| 23***56 | Clevis | 1 |
| 3B***07 | Cotter--Yoke Assembly | 1 |
218-4936 Lines Gp-Fuel Injection
| 06***80 | Fitting | 1 |
| 09***40 | Clip | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
280-6719 Pump Gp-Fuel Injection
| 21***76 | Pump Group-Gov & Fuel Inj | 1 |
| 22***43 | Gasket | 1 |
| 22***44 | Flange | 1 |
216-5468 Pump Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 09***40 | Washer | 2 |
| 09***74 | Clip-Hose | 13 |
228-9129 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 22***43 | Gasket | 1 |
| 22***44 | Flange | 1 |
| 22***48 | Retainer | 1 |
237-8094 Pump Gp-Gov & Fuel Inj
| 23***97 | Wire As | 1 |
| 23***94 | Pump Group-Gov & Fuel Inj | 2 |
216-5476 Pump Gp-Gov & Fuel Inj
| 11***18 | Ring-Retaining | 1 |
| 14***54 | Drain As; (Sensor) | 1 |
| 19***18 | Sensor Group-Moisture; (Water Separator) | 1 |
280-6711 Pump Gp-Gov & Fuel Inj
| 11***03 | Washer | 4 |
| 23***96 | Solenoid As; (Fuel Shutoff) | 1 |
| 23***98 | Filter Element-Fuel; (Fuel Pump)(Internal Fuel Pump) | 1 |
280-6720 Pump Gp-Gov & Fuel Inj
| 11***03 | Washer | 4 |
| 21***04 | Cap Group-Protection | 1 |
| 23***96 | Solenoid As; (Fuel Shutoff) | 1 |
194-3103 Tank Gp-Fuel
| 19***03 | Tank Group-Fuel | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
194-3102 Tank Gp-Fuel
| 19***02 | Tank Group-Fuel | 1 |
| 23***97 | Wire As | 1 |
| 28***11 | Pump Group-Gov & Fuel Inj | 1 |
Hydraulic System
9t-7642 Valve Gp-Control -Angle, Tilt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 15***10 | Hose As | 1 |
238-2784 Valve Gp-Control -Blade Tilt
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
199-3476 Valve Gp-Control -Blade Lift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 15***10 | Hose As | 1 |
238-2779 Valve Gp-Control -Blade Lift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 13***91 | Body | 1 |
| 13***97 | Plate | 1 |
231-6135 Valve Gp-Control -Blade Tilt
| 17***76 | Valve Group-Pilot Relief | 2 |
| 19***90 | Bolt | 4 |
| 19***92 | Kit-Seal; (Solenoid) | 1 |
231-6137 Valve Gp-Control -Blade Lift
| 17***76 | Valve Group-Pilot Relief | 2 |
| 19***90 | Bolt | 4 |
| 19***92 | Kit-Seal; (Solenoid) | 1 |
214-6345 Valve Gp-Control -Hydrostatic Drive
| 09***83 | Seal-O-Ring (Id=14.80mm) | 1 |
| 12***76 | Seal | 1 |
| 21***45 | Valve Group-Control; -Hydrostatic Drive | 1 |
199-3477 Valve Gp-Control -Auxiliary
| 19***77 | Valve Group-Control; -Angle-Auxiliary | 1 |
| 23***60 | Plate | 2 |
| 23***61 | Seal-Wiper | 2 |
232-1698 Valve Gp-Control -Auxiliary
| 23***98 | Valve Group-Control; -Auxiliary | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
259-0460 Cylinder Gp-Angling
216-7388 Cylinder Gp-Angling
183-3721 Cylinder Gp-Bulldozer Lift
259-0459 Cylinder Gp-Hydraulic
192-0893 Cylinder Gp-Ripper -Lh
| 17***32 | Control Group-Hydraulic Hand; -Ripper | 1 |
| 19***93 | Cylinder Group-Ripper; (Lh Riphead) | 1 |
| 19***82 | Lines Group-Rear Attachment | 1 |
192-0891 Cylinder Gp-Ripper -Rh
183-8459 Cylinder Gp-Tilt
| 17***32 | Control Group-Hydraulic Hand; -Ripper | 1 |
| 18***94 | Lines Group-Rear Attachment | 1 |
| 18***59 | Cylinder Group-Tilt | 1 |
194-1083 Hydraulic Ar -Blade And Rear Attachment With Winch
| 10***36 | Clip | 2 |
| 13***17 | Hose Assem. | 2 |
| 18***37 | Plate | 2 |
198-3812 Hydraulic Ar
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***36 | Clip | 2 |
| 18***37 | Plate | 2 |
174-5983 Hydraulic Ar -Blade And Rear Lines
| 13***00 | Pump Group-Gear; -Implement | 1 |
| 17***83 | Hydraulic Ar; -Blade And Rear Lines | 1 |
| 17***90 | Control Group-Hydraulic Hand; -Bulldozer | 1 |
185-4761 Lines Gp-Angle & Tilt
| 18***61 | Lines Group-Angle & Tilt | 1 |
| 22***96 | Valve Group-Counterbalance | 1 |
| 22***09 | Tube As | 1 |
264-8953 Lines Gp-Angle & Tilt
| 22***96 | Valve Group-Counterbalance | 1 |
| 22***09 | Tube As | 1 |
| 22***10 | Hose As | 1 |
265-8159 Lines Gp-Bulldozer
| 17***07 | Clip | 1 |
| 17***37 | Bracket As | 1 |
| 18***02 | Plate | 1 |
227-0808 Lines Gp-Bulldozer
| 17***69 | Hose As | 4 |
| 17***93 | Tube As | 1 |
| 17***15 | Tube As | 1 |
174-5991 Lines Gp-Hydraulic -3 Circuits
| 14***74 | Tube As | 1 |
| 17***91 | Lines Group-Hydraulic; -3 Circuits | 1 |
| 17***64 | Hose As | 1 |
221-9805 Lines Gp-Pressure Test
| 18***91 | Hose As | 1 |
| 18***73 | Hose As | 1 |
| 18***53 | Cover | 1 |
174-5992 Lines Gp-Pump -Implement
| 17***92 | Lines Group-Pump; -Implement | 1 |
| 18***85 | Cover | 1 |
| 19***23 | Hose As | 1 |
194-1082 Lines Gp-Rear Attachment
| 10***36 | Clip | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 4 |
| 17***23 | Adapter | 1 |
180-3494 Lines Gp-Rear Attachment
| 18***94 | Lines Group-Rear Attachment | 1 |
| 19***27 | Hose As | 2 |
| 19***28 | Hose As | 2 |
193-2178 Lines Gp-Ripper
| 13***96 | Pump Group-Gear; -Implement | 1 |
| 19***78 | Lines Group-Ripper | 1 |
| 6D***04 | Gasket--To Housing Assembly Rear | 1 |
221-2957 Lines Gp-Winch
| 09***32 | Bolt-Socket Head; (M12x1.75x95-mm) | 4 |
| 13***81 | Kit-Seal; (Gear Pump) | 1 |
| 22***57 | Lines Group-Winch | 1 |
246-4958 Manifold Gp-Inlet
| 19***99 | Tank Group-Hydraulic | 1 |
| 24***58 | Manifold Group-Inlet | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
137-1296 Pump Gp-Gear
| 13***96 | Pump Group-Gear; -Implement | 1 |
| 19***18 | Plug | 2 |
| 22***95 | Valve Group-Bank 2; -Blade Lift, Tilt | 1 |
137-0300 Pump Gp-Gear
| 11***10 | Gasket-Screen; (Hydraulic Tank) | 1 |
| 13***00 | Pump Group-Gear; -Implement | 1 |
| 19***00 | Tank As-Hydraulic | 1 |
194-3099 Tank Gp-Hydraulic
| 17***60 | Bracket As | 1 |
| 19***99 | Tank Group-Hydraulic | 1 |
| 22***36 | Valve Group-Bank 3; -Blade Lift, Tilt | 1 |
194-3098 Tank Gp-Hydraulic
| 17***60 | Bracket As | 1 |
| 19***98 | Tank Group-Hydraulic | 1 |
| 21***33 | Valve Group-Bank 3; -Blade Lift, Tilt, Angle | 1 |
227-5701 Valve & Mtg Gp-Bulldozer
| 19***18 | Plug | 2 |
| 22***95 | Valve Group-Bank 2; -Blade Lift, Tilt | 1 |
| 22***22 | Plate | 1 |
265-8162 Valve & Mtg Gp-Control -Grade
| 23***24 | Manifold | 1 |
| 23***25 | Manifold-Inlet | 1 |
| 23***35 | Valve Group-Control; -Blade Tilt | 2 |
174-5995 Valve & Mtg Gp-Control
| 17***45 | Valve As | 1 |
| 17***48 | Valve As-Control; (End Cover) | 1 |
| 17***29 | Kit-Installation | 1 |
228-1650 Valve & Mtg Gp-Control
| 09***28 | Rod | 2 |
| 09***29 | Rod | 1 |
| 19***75 | Manifold; (Inlet) | 1 |
8j-6875 Valve Gp-Shuttle
| 15***23 | Boss As | 1 |
| 15***25 | Bar As | 1 |
| 15***15 | Boss As | 1 |
225-9595 Valve Gp-Bank 2 -Blade Lift, Tilt
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 22***95 | Valve Group-Bank 2; -Blade Lift, Tilt | 1 |
| 23***25 | Manifold-Inlet | 1 |
228-1636 Valve Gp-Bank 3 -Blade Lift, Tilt
| 09***25 | Rod | 2 |
| 09***26 | Rod | 1 |
| 18***09 | Valve Group-Relief; -Tilt Cylinder | 1 |
216-1633 Valve Gp-Bank 3 -Blade Lift, Tilt, Angle
| 09***28 | Rod | 2 |
| 09***29 | Rod | 1 |
| 19***75 | Manifold; (Inlet) | 1 |
243-3165 Valve Gp-Bank 3
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 2 |
| 23***25 | Manifold-Inlet | 1 |
| 23***35 | Valve Group-Control; -Blade Tilt | 2 |
228-1637 Valve Gp-Bank 3
| 22***37 | Valve Group-Bank 3; -Blade Lift, Tilt, Angle | 1 |
| 23***24 | Manifold | 1 |
| 23***25 | Manifold-Inlet | 1 |
294-7404 Valve Gp-Bank 4
| 09***32 | Cap | 1 |
| 29***04 | Valve Group-Bank 4 | 1 |
| 4J***27 | Seal-O-Ring -Pipe As. To Hydraulic Tank | 1 |
216-1634 Valve Gp-Bank 4 -Blade Lift Makeup
| 09***25 | Rod | 2 |
| 09***26 | Rod | 1 |
| 18***09 | Valve Group-Relief; -Tilt Cylinder | 1 |
228-1638 Valve Gp-Bank 4 -Blade Lift Makeup
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 22***38 | Valve Group-Bank 4; -Blade Lift Makeup | 1 |
265-4941 Valve Gp-Bank 4
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 26***41 | Valve Group-Bank 4 | 1 |
9t-7634 Valve Gp-Check
| 11***19 | Spring | 1 |
| 12***38 | Sleeve-Detent | 1 |
| 20***64 | Plate | 1 |
231-6138 Valve Gp-Check -Blade Lift
| 09***32 | Cap | 1 |
| 23***38 | Valve Group-Check; -Blade Lift | 1 |
| 4J***27 | Seal-O-Ring -Pipe As. To Hydraulic Tank | 1 |
225-9596 Valve Gp-Counterbalance
| 08***39 | Seal-O-Ring (Id=26.64mm) | 2 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 8 |
| 09***96 | Bolt-Socket Head; (M61x1x65-mm) | 4 |
180-7339 Valve Gp-Pilot -Winch Control
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 18***39 | Valve Group-Pilot; -Winch Control | 1 |
163-3109 Valve Gp-Pilot Cartridge
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 16***09 | Valve Group-Pilot Cartridge | 1 |
234-8822 Valve Gp-Pump Control
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***22 | Valve Group-Pump Control | 1 |
231-6142 Valve Gp-Relief -Line
| 15***51 | Spacer | 2 |
| 15***53 | Spacer | 4 |
| 17***57 | Trunnion | 1 |
185-7709 Valve Gp-Relief
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 18***09 | Valve Group-Relief; -Tilt Cylinder | 1 |
199-3478 Valve Gp-Relief -Main
| 19***78 | Valve Group-Relief; -Main | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
231-6140 Valve Gp-Relief -Main
| 15***51 | Spacer | 2 |
| 15***53 | Spacer | 4 |
| 17***57 | Trunnion | 1 |
Implements
264-8942 C-Frame Gp-Power Angling
| 26***42 | C-Frame Group-Power Angling | 1 |
174-5982 C-Frame Gp-Power Angling
| 15***25 | Boss As | 1 |
| 15***27 | Boss As | 1 |
| 15***29 | Bar As | 1 |
220-1985 Link Gp-Pitch
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
150-5131 Link Gp-Pitch
| 15***31 | Link Group-Pitch | 1 |
Lubrication System
180-3559 Filler Gp-Engine Oil
| 13***01 | Body As | 1 |
| 13***12 | Nut | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
195-9873 Filter Gp-Engine Oil
| 09***28 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 10***74 | Bolt | 1 |
151-5283 Fumes Disposal Gp
| 15***81 | Hose; (Upper Fumes Disposal) | 1 |
| 15***83 | Fumes Disposal Group | 1 |
| 15***19 | Hose; (Lower Fumes Disposal) | 1 |
106-8257 Gauge Gp-Oil Level (Dipstick) -Engine
| 10***57 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 12***41 | Tube As-Guide | 1 |
| 20***47 | Gauge-Oil Level; (Engine Oil Dipstick) | 1 |
106-8269 Pump Gp-Engine Oil
| 09***21 | Seal-O-Ring (Id=19.08mm) | 1 |
| 09***85 | Washer-Copper | 1 |
| 10***44 | Nut | 1 |
147-1046 Valve Gp-Fluid Sampling -Engine Oil
| 14***46 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3B***64 | Bushing; (Reducing) | 1 |
| 7J***11 | Elbow-Pipe; (1/4-18 Nptf Thd) | 1 |
Machine Arrangement
213-6360 Chassis Ar -Xl
| 17***64 | Hitch Group-Towing | 1 |
| 17***65 | Enclosure Group-Rear | 1 |
| 17***73 | Guard Group-Bottom | 1 |
213-6362 Chassis Ar -Lgp
| 17***64 | Hitch Group-Towing | 1 |
| 17***65 | Enclosure Group-Rear | 1 |
| 17***73 | Guard Group-Bottom | 1 |
213-6347 General Ar -Lgp
| 17***09 | Undercarriage Ar; -Lgp | 1 |
| 19***12 | Hydraulic Ar | 1 |
| 21***12 | Engine Ar-Primary | 1 |
213-6345 General Ar -Xl
| 17***06 | Undercarriage Ar; -Xl | 1 |
| 19***12 | Hydraulic Ar | 1 |
| 21***12 | Engine Ar-Primary | 1 |
Operator Station
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 10***80 | Clip | 2 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 17***45 | Air Conditioner Group | 1 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***13 | Grommet | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
173-1028 Adjuster Gp-Seat
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
| 17***02 | Air Conditioner Group | 1 |
233-7962 Air Conditioner Gp
| 19***90 | Guard Group-Brush; -Side | 1 |
| 19***00 | Guard Group-Brush; -Rear | 1 |
| 20***26 | Enclosure Group-Platform | 1 |
176-8302 Air Conditioner Gp
| 17***02 | Air Conditioner Group | 1 |
| 17***91 | Mirror Group-Rear View | 1 |
| 17***00 | Wiper Group-Window | 1 |
177-4345 Air Conditioner Gp
| 17***45 | Air Conditioner Group | 1 |
| 20***26 | Enclosure Group-Platform | 1 |
| 22***74 | Cab Ar | 1 |
233-7961 Cab Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 23***61 | Cab Ar | 1 |
233-7958 Cab Ar
| 12***13 | Support As-Foot | 1 |
| 12***80 | Shield-Striker | 2 |
| 14***71 | Louver As | 6 |
222-6974 Cab Ar
| 12***13 | Support As-Foot | 1 |
| 12***80 | Shield-Striker | 2 |
| 14***71 | Louver As | 6 |
222-6975 Cab Gp
| 1P***44 | V-Belt | 1 |
| 1S***98 | Rod | 1 |
| 20***86 | Plate | 2 |
222-6978 Cab Gp-Enclosed Rops -With Brush Guards
| 18***27 | Condenser Group-Refrigerant | 1 |
| 18***92 | Bracket As | 1 |
| 18***42 | Cover As | 1 |
3e-1908 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 12***66 | Socket-Connector; (14-Ga To 18-Ga) | 2 |
233-7945 Compressor Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***09 | Knob-Control | 2 |
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 5 |
183-4739 Condenser & Mtg Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***09 | Knob-Control | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
180-5927 Condenser Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***09 | Knob-Control | 2 |
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 5 |
231-0060 Control Gp-Air & Temperature
| 18***53 | Lever As | 1 |
| 21***23 | Pedal Group-Governor & Brake | 1 |
| 22***65 | Plate As | 1 |
177-5284 Control Gp-Air & Temperature -Open Rops
| 17***84 | Control Group-Air & Temperature; -Open Rops | 1 |
| 18***53 | Lever As | 1 |
| 21***23 | Pedal Group-Governor & Brake | 1 |
231-0061 Control Gp-Air & Temperature
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
| 23***61 | Control Group-Air & Temperature | 1 |
213-6365 Control Gp-Governor & Brake
| 11***90 | Lever | 1 |
| 12***30 | Rod | 1 |
| 17***91 | Nut-Spring | 8 |
292-2505 Control Gp-Handle -Bulldozer Control
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 19***31 | Adapter; (Compact) | 1 |
| 24***16 | Display Group-Monitor; (Cd700) | 1 |
178-8032 Control Gp-Hydraulic Hand -Ripper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***88 | Grommet | 2 |
| 10***71 | Clevis | 1 |
174-5990 Control Gp-Hydraulic Hand -Bulldozer
| 17***90 | Control Group-Hydraulic Hand; -Bulldozer | 1 |
| 23***09 | Receptacle As-Connector; (4-Pin) | 1 |
| 8T***37 | Plug-Seal; (40 Pin Connector) | 1 |
286-9124 Display Gp-Monitor -Light Bar
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***88 | Grommet | 2 |
| 10***71 | Clevis | 1 |
286-0134 Display Gp-Monitor -Cd700c
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***71 | Clevis | 1 |
| 10***90 | Bolt; (M6x1x25-mm) | 4 |
190-1199 Door Gp-Cab -Brush Guard, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***13 | Grommet | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
179-6472 Door Gp-Cab -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***88 | Grommet | 2 |
| 10***71 | Clevis | 1 |
190-1198 Door Gp-Cab -Brush Guard, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***71 | Clevis | 1 |
| 10***90 | Bolt; (M6x1x25-mm) | 4 |
179-6471 Door Gp-Cab -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***88 | Grommet | 2 |
| 10***71 | Clevis | 1 |
174-5875 Guard Gp-Vandalism
| 10***80 | Clip | 2 |
| 14***71 | Louver As | 4 |
| 17***75 | Guard Group-Vandalism | 1 |
222-4691 Heater Gp-Cab -Open Rops
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***55 | Cover-Speaker | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
185-1557 Heater Gp-Cab -Open Rops
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
174-2231 Housing Gp-Seat Suspension
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***25 | Screw-Machine; (8-32x1-In) | 4 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 20 |
179-6470 Installation Gp-Radio
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***96 | Clip | 2 |
| 10***93 | Valve As | 1 |
231-0066 Liner Gp-Cab -Operator Console
| 23***66 | Liner Group-Cab; -Operator Console | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
177-5273 Liner Gp-Cab
| 10***23 | Valve As-Shutoff; (Lower) | 2 |
| 17***73 | Liner Group-Cab | 1 |
| 1S***79 | Gasket | 2 |
184-6986 Lines Gp-Air Conditioner
| 18***86 | Lines Group-Air Conditioner | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
186-0872 Lines Gp-Heater
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***72 | Lines Group-Heater | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
6v-1971 Literature Gp -Machine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 20***23 | Cap; (Wiper) | 1 |
177-5291 Mirror Gp-Rear View
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Mirror Group-Rear View | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
223-6538 Module Gp-Warning Indicator
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 19***10 | Cap-Wiper | 1 |
179-4811 Motor Gp-Window Wiper -Door, Rh
| 17***11 | Motor Group-Window Wiper; -Door, Rh | 1 |
| 26***70 | Bracket As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
179-4810 Motor Gp-Window Wiper -Door, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***10 | Motor Group-Window Wiper; -Door, Lh | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
262-1995 Motor Gp-Window Wiper -Door, Lh
| 16***82 | Spacer; (10.5x25x0.25-mm Thk) | 2 |
| 26***74 | Bracket As | 1 |
| 26***95 | Motor Group-Window Wiper; -Door, Lh | 1 |
179-4809 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***09 | Motor Group-Window Wiper; -Front | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
262-1996 Motor Gp-Window Wiper -Door, Rh
| 22***84 | Plate As | 1 |
| 22***85 | Plate | 1 |
| 26***96 | Motor Group-Window Wiper; -Door, Rh | 1 |
261-0169 Mounting Gp-Antenna -Open Rops
| 26***69 | Mounting Group-Antenna; -Open Rops | 1 |
| 26***58 | Plate As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
261-0173 Mounting Gp-Antenna -Enclosed Rops
| 11***92 | Grommet | 1 |
| 22***86 | Plate As | 1 |
| 22***87 | Plate As | 1 |
228-2682 Mounting Gp-Control -Valve Interface Module
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 22***23 | Bracket As | 1 |
| 22***24 | Plate | 1 |
228-2683 Mounting Gp-Control -Power Supply Module
| 22***51 | Washer-Hard; (11x32x5-mm Thk) | 2 |
| 22***83 | Mounting Group-Control; -Power Supply Module | 1 |
| 24***34 | Knob | 2 |
270-2751 Mounting Gp-Monitor -Display, Light Bar
| 14***80 | Bracket-Mounting | 1 |
| 16***10 | Bracket As | 1 |
| 27***51 | Mounting Group-Monitor; -Display, Light Bar | 1 |
225-2625 Mounting Gp-Monitor -Grade Control
| 14***32 | Mounting As | 4 |
| 17***31 | Washer; (26x135x12-mm Thk) | 4 |
| 19***63 | Sleeve | 4 |
176-7728 Mounting Gp-Platform
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***28 | Mounting Group-Platform | 1 |
259-4746 Mounting Gp-Radio -Grade Control
| 16***83 | Knob-Lumbar | 1 |
| 16***97 | Cushion Assem. | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
292-9237 Pan Gp-Backrest -Lumbar
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
180-7305 Pan Gp-Backrest -Vinyl
| 16***83 | Knob-Lumbar | 1 |
| 18***05 | Pan Group-Backrest; -Vinyl | 1 |
| 25***28 | Plug | 3 |
178-0604 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***04 | Pan Group-Backrest; -Cloth, Lumbar | 1 |
292-9238 Pan Gp-Backrest -Vinyl
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 25***28 | Plug | 3 |
210-4622 Panel Gp-Instrument -Enclosed Rops
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
210-4623 Panel Gp-Instrument -Open Rops
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
217-8423 Pedal Gp-Governor & Brake
| 17***91 | Mirror Group-Rear View | 1 |
| 17***00 | Wiper Group-Window | 1 |
| 17***70 | Installation Group-Radio | 1 |
210-2270 Recliner Gp-Seat
| 0T***44 | Bolt (1.25" Long) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
| 21***70 | Recliner Group-Seat; -Cloth | 1 |
177-4935 Recliner Gp-Seat
| 12***13 | Support As-Foot | 1 |
| 17***09 | Platform As; (Open Rops) | 1 |
| 17***35 | Recliner Group-Seat | 1 |
222-6977 Rops Ar -With Brush Guards
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
222-6971 Rops Gp-Open
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
222-0345 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***91 | Rod | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
180-7304 Seat Gp -Vinyl
| 16***65 | Suspension Group-Seat | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
178-0603 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***26 | Cushion As | 1 |
178-0606 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***26 | Cushion As | 1 |
184-6011 Seat Gp -Vinyl
| 03***32 | Bolt; (5/16-18x0.43-In) | 2 |
| 10***14 | Plate As | 2 |
| 15***50 | Seat Group-Suspension; -Vinyl | 1 |
225-2611 Seat Gp-Suspension -Cloth
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 17***06 | Seat Group | 1 |
159-2950 Seat Gp-Suspension -Vinyl
| 03***32 | Bolt; (5/16-18x0.43-In) | 2 |
| 10***14 | Plate As | 2 |
| 15***50 | Seat Group-Suspension; -Vinyl | 1 |
261-7484 Seat Gp-Suspension -Air Suspension, Cloth
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
160-7186 Seat Gp-Suspension -Cloth
| 16***86 | Seat Group-Suspension; -Cloth | 1 |
| 26***33 | Seat Group-Suspension; -Air Suspension, Vinyl | 1 |
| 2V***60 | Grommet | 1 |
261-4180 Seat Gp-Suspension -Air Suspension, Vinyl
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 18***11 | Seat Group | 1 |
261-4181 Seat Gp-Suspension -Air Suspension, Cloth
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
261-7533 Seat Gp-Suspension -Air Suspension, Vinyl
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
225-2610 Seat Gp-Suspension -Vinyl
| 22***10 | Seat Group-Suspension; -Vinyl | 1 |
| 26***84 | Seat Group-Suspension; -Air Suspension, Cloth | 1 |
| 2V***60 | Grommet | 1 |
261-7486 Suspension Gp-Seat -Air
| 13***32 | Seal; (600-cm) | 0 |
| 21***12 | Window Group-Cab; -Lh | 1 |
| 21***14 | Rail; (Lh) | 1 |
160-7165 Suspension Gp-Seat
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***65 | Suspension Group-Seat | 1 |
| 18***66 | Tank As-Window Washer | 1 |
261-7485 Suspension Gp-Seat -Air
| 13***32 | Seal; (600-cm) | 0 |
| 21***11 | Window Group-Cab; -Rh | 1 |
| 21***13 | Rail; (Rh) | 1 |
184-4361 Washer Gp-Window
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 1 |
| 13***32 | Seal; (600-cm) | 0 |
| 13***70 | Seal; (326-cm) | 0 |
179-6482 Window Gp-Cab -Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***61 | Arm As-Window Wiper; (Rear) | 2 |
| 17***09 | Motor Group-Window Wiper; -Front | 1 |
212-4211 Window Gp-Cab -Rh
| 15***31 | Link Group-Pitch | 1 |
| 18***66 | Blade Group-Angling; -Xl | 1 |
| 21***11 | Window Group-Cab; -Rh | 1 |
179-6481 Window Gp-Cab -Rh
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 1 |
| 13***32 | Seal; (600-cm) | 0 |
| 13***70 | Seal; (326-cm) | 0 |
212-4212 Window Gp-Cab -Lh
| 18***48 | Blade Group-Angling; -(Xl) | 1 |
| 21***12 | Window Group-Cab; -Lh | 1 |
| 22***85 | Link Group-Pitch | 1 |
177-5300 Wiper Gp-Window
| 15***31 | Link Group-Pitch | 1 |
| 17***00 | Wiper Group-Window | 1 |
| 18***83 | Blade Group-Angling; -(Lgp) | 1 |
Power Train
234-8821 Actuator Gp-Pump
| 00***64 | Seal-O-Ring | 2 |
| 18***68 | Cover | 1 |
| 18***69 | Cover | 1 |
212-7032 Actuator Gp-Pump -Servo
| 15***46 | Ring | 2 |
| 15***47 | Ring | 2 |
| 21***32 | Actuator Group-Pump; -Servo | 1 |
175-5473 Block Gp-Hydraulic
| 10***92 | Spring | 1 |
| 10***93 | Poppet | 2 |
| 12***35 | Spring | 1 |
178-7065 Brake Gp-Parking
| 11***74 | Housing-Spring | 1 |
| 11***82 | Gasket | 1 |
| 11***88 | Seal-Ring | 1 |
113-1760 Drive Gp-Final
| 10***04 | Hub-Ring Gear | 2 |
| 10***33 | Gear-Pinion; (21-Teeth) | 2 |
| 10***34 | Gear-Spur; (68-Teeth) | 2 |
113-1759 Drive Gp-Final
| 10***26 | Shaft-Sun Gear | 2 |
| 10***04 | Hub-Ring Gear | 2 |
| 10***33 | Gear-Pinion; (21-Teeth) | 2 |
214-6338 Drive Gp-Hydrostatic
| 09***69 | Bolt | 2 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 12***01 | Stud-Taperlock | 4 |
212-9363 Filter Gp-Oil -Front-Power Train
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 21***63 | Filter Group-Oil; -Front-Power Train | 1 |
199-1090 Head Gp-Motor
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 10***16 | Seal-O-Ring | 2 |
| 12***86 | Valve; (Pilot) | 2 |
267-2596 Head Gp-Motor
| 12***87 | Seat | 2 |
| 20***06 | Valve Group-Motor Control; -Propel Motor | 1 |
| 20***09 | Valve Group-Flushing; -Propel Motor | 1 |
212-7034 Head Gp-Pump
| 15***45 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
| 21***34 | Head Group-Pump | 1 |
234-9146 Head Gp-Pump
| 08***01 | Plug As | 1 |
| 11***29 | Screw | 1 |
| 12***94 | Plug; (Break Off) | 2 |
212-7036 Head Gp-Pump
| 08***72 | Plug-O-Ring | 3 |
| 10***99 | Plug | 1 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 4 |
234-8825 Head Gp-Pump
| 12***56 | Cap | 1 |
| 12***57 | Valve Group-Relief; -Pressure Override | 1 |
| 14***05 | Kit-Seal; (Pump Head Relief Valve) | 1 |
214-6340 Lines Gp-Hydrostatic
| 11***29 | Elbow | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 10 |
| 21***40 | Lines Group-Hydrostatic | 1 |
174-5869 Lines Gp-Power Train Cooler
| 17***69 | Lines Group-Power Train Cooler | 1 |
| 17***73 | Block Group-Hydraulic | 1 |
| 18***11 | Hose As | 1 |
214-6341 Lines Gp-Transmission Oil -Charge
| 13***51 | Spacer; (11x19x6-mm Thk) | 8 |
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 17***66 | Bracket As | 1 |
214-6342 Lines Gp-Transmission Oil -Case Drain
| 10***05 | Tee-O-Ring | 1 |
| 17***53 | Block | 1 |
| 17***55 | Tube As | 1 |
257-9785 Motor Gp-Piston
| 12***13 | Seal; (Shaft) | 1 |
| 12***81 | Cap | 2 |
| 19***88 | Rotating Group-Motor; -Hystat Propel | 1 |
200-1729 Motor Gp-Piston
| 09***00 | Setscrew-Socket | 1 |
| 13***39 | Seal-Lip Type | 1 |
| 14***05 | Setscrew; (M10x1.5x70mm) | 1 |
169-2976 Motor Gp-Piston
| 12***13 | Seal; (Shaft) | 1 |
| 12***81 | Cap | 2 |
| 16***76 | Motor Group-Piston | 1 |
213-6373 Power Train Ar -Xl
| 11***59 | Drive Group-Final | 1 |
| 16***76 | Motor Group-Piston | 2 |
| 17***69 | Lines Group-Power Train Cooler | 1 |
213-6374 Power Train Ar -Lgp
| 11***60 | Drive Group-Final | 1 |
| 16***76 | Motor Group-Piston | 2 |
| 17***69 | Lines Group-Power Train Cooler | 1 |
234-9147 Pump Gp-Charge
| 12***97 | Seal-O-Ring | 2 |
| 12***77 | Bushing-Coupling | 1 |
| 14***09 | Ring | 1 |
234-8824 Pump Gp-Charge
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 8 |
| 12***97 | Seal-O-Ring | 2 |
| 12***02 | Seal-O-Ring | 1 |
212-7037 Pump Gp-Charge
| 11***78 | Bushing; (Bearing) | 1 |
| 11***22 | Seal-Ring | 2 |
| 12***09 | Plate | 1 |
215-9302 Pump Gp-Piston
| 13***73 | Bolt-Socket Head; (M16x2x35-mm) | 2 |
| 21***02 | Pump Group-Piston | 1 |
| 22***67 | Pump Group-Piston; -Front | 1 |
221-3667 Pump Gp-Piston -Front
| 12***38 | Pin-Joint | 2 |
| 13***48 | Rotary Group; (Actuator Piston) | 1 |
| 14***22 | Screw-Eccentric | 1 |
221-3669 Pump Gp-Piston -Rear
| 12***38 | Pin-Joint | 2 |
| 14***22 | Screw-Eccentric | 1 |
| 16***05 | Pin | 2 |
178-4415 Pump Gp-Piston -Slipper
| 11***26 | Pin | 1 |
| 16***19 | Plug As | 1 |
| 16***05 | Pin | 2 |
214-3243 Pump Gp-Piston
| 21***43 | Pump Group-Piston | 1 |
| 22***67 | Pump Group-Piston; -Front | 1 |
| 22***69 | Pump Group-Piston; -Rear | 1 |
221-3668 Pump Gp-Piston -Rear
| 12***38 | Pin-Joint | 2 |
| 14***22 | Screw-Eccentric | 1 |
| 16***05 | Pin | 2 |
199-1088 Rotating Gp-Motor
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***32 | Shim; (3.50mm Thk) | 1 |
| 12***33 | Shim; (3.60mm Thk) | 1 |
188-7449 Rotating Gp-Pump
| 12***03 | Plate; (Adjustment) | 1 |
| 13***06 | Rod | 2 |
| 14***25 | Piston Assem. | 9 |
256-8778 Rotating Gp-Pump
| 19***77 | Segment-Sprocket | 4 |
| 19***78 | Segment-Sprocket | 6 |
| 25***78 | Rotating Group-Pump; -Vibratory | 1 |
256-9357 Rotating Gp-Pump
| 17***90 | Valve Group-Solenoid; -12-Volt | 1 |
| 20***71 | Valve Group-Solenoid; -Parking Brake | 1 |
| 25***57 | Rotating Group-Pump; -Hydraulic-Propel | 1 |
212-7031 Rotating Gp-Pump
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 12***40 | Bearing-Roller | 1 |
153-1335 Segment Gp-Sprocket
| 15***35 | Segment Group-Sprocket | 1 |
| 17***90 | Valve Group-Solenoid; -12-Volt | 1 |
| 26***74 | Valve Group-Solenoid; -Parking Brake | 1 |
200-6492 Valve & Mtg Gp-Solenoid -Brake, Override
| 10***17 | Seal-O-Ring | 2 |
| 12***04 | Shim; (1-mm Thk) | 1 |
| 12***05 | Shim; (0.3-mm Thk) | 1 |
278-8946 Valve Gp-Check
| 19***28 | Coil As; (12-Vdc) | 1 |
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***70 | Solenoid Group-Proportional; (12-Volt)(Hydraulic Fan) | 1 |
202-7709 Valve Gp-Flushing
| 19***28 | Coil As; (12-Vdc) | 1 |
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***70 | Solenoid Group-Proportional; (12-Volt)(Hydraulic Fan) | 1 |
202-7707 Valve Gp-Motor Control
| 16***15 | Retainer-Spring | 1 |
| 18***10 | Screw | 1 |
| 20***42 | Spring | 1 |
202-7706 Valve Gp-Motor Control
| 08***39 | Seal-O-Ring (Id=26.64mm) | 2 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 1 |
| 19***53 | Gasket | 1 |
212-7033 Valve Gp-Pump Control
| 12***75 | Screw-Lock | 1 |
| 12***89 | Valve-Bushing | 1 |
| 12***90 | Control-Piston | 1 |
212-7035 Valve Gp-Relief -Crossover
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 19***30 | Kit-Seal; (Solenoid Valve) | 1 |
| 20***70 | Valve As | 1 |
177-7122 Valve Gp-Relief -Charge Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
123-7557 Valve Gp-Relief -Pressure Override
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 12***57 | Valve Group-Relief; -Pressure Override | 1 |
154-9445 Valve Gp-Relief -Pressure Override
| 15***45 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 16***13 | Ring-Backup | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
6e-4402 Valve Gp-Relief -Charge Pressure
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 6E***07 | Locknut-Sealing | 1 |
| 6E***02 | Valve Group-Relief; -Charge Pressure-Hydrostatic Drive | 1 |
201-2171 Valve Gp-Solenoid -Parking Brake
| 09***00 | Washer; (12.7x30x4-mm Thk) | 4 |
| 16***41 | Bolt; (M10x1.5x50-mm) | 1 |
| 17***31 | Bar | 2 |
269-5774 Valve Gp-Solenoid -Parking Brake
| 09***00 | Washer; (12.7x30x4-mm Thk) | 4 |
| 16***41 | Bolt; (M10x1.5x50-mm) | 1 |
| 17***31 | Bar | 2 |
179-9390 Valve Gp-Solenoid
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 17***90 | Valve Group-Solenoid; -12-Volt | 1 |
| 19***30 | Kit-Seal; (Solenoid Valve) | 1 |
Service Equipment And Supplies
219-6304 Cap Gp-Protection
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 21***04 | Cap Group-Protection | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 3 |
200-6425 Film Gp
| 10***15 | Film-Notice; (Radio) | 2 |
| 18***53 | Film-Warning; (Cable Connection) | 1 |
| 18***62 | Film-Warning; (Read Omm) | 1 |
200-6933 Film Gp
| 18***56 | Film-Warning; (Jumper/Battery) | 1 |
| 18***63 | Film-Warning; (Read Operation Manual) | 1 |
| 20***33 | Film Group | 1 |
222-6455 Lock Gp-Vandalism
| 14***73 | Film-Notice; (Engine Starting) | 1 |
| 18***52 | Film-Warning; (Cable Connection) | 1 |
| 18***64 | Film-Warning; (Read Omm, Czech) | 1 |
209-0171 Plate & Film Gp
| 18***60 | Film-Warning; (Cable Connection) | 1 |
| 18***67 | Film-Warning; (Read Operation Manual) | 1 |
| 20***71 | Plate & Film Group | 1 |
209-0168 Plate & Film Gp
| 10***59 | Film-Notice; (Radio) | 2 |
| 18***48 | Film-Warning; (Cable Connection) | 1 |
| 18***65 | Film-Warning; (Read Omm) | 1 |
209-0175 Plate & Film Gp
| 18***58 | Film-Warning; (Cable Connection) | 1 |
| 18***71 | Film-Warning; (Read Operation Manual) | 1 |
| 20***75 | Plate & Film Group | 1 |
209-0183 Plate & Film Gp
| 10***19 | Film-Notice; (Engine Starting) | 1 |
| 10***62 | Film-Notice; (Radio) | 2 |
| 18***57 | Film-Warning; (Cable Connection) | 1 |
209-0182 Plate & Film Gp
| 10***08 | Film-Notice; (Radio) | 2 |
| 18***42 | Film-Warning; (Cable Connection) | 1 |
| 18***78 | Film-Warning; (Read Operation Manual) | 1 |
209-0178 Plate & Film Gp
| 10***02 | Film-Notice; (Radio) | 2 |
| 12***91 | Plate-Warning; (High Pressure Cylinder) | 2 |
| 18***54 | Film-Warning; (Jumper/Battery) | 1 |
223-4795 Plate & Film Gp
| 22***95 | Plate & Film Group | 1 |
209-0186 Plate & Film Gp
| 20***86 | Plate & Film Group | 1 |
209-0179 Plate & Film Gp
| 14***30 | Film-Notice; (Radio) | 2 |
| 15***70 | Plate-Warning; (High Pressure Cylinder) | 1 |
| 18***59 | Film-Warning; (Cable Connection) | 1 |
209-0170 Plate & Film Gp
| 10***61 | Film-Notice; (Radio) | 2 |
| 18***50 | Film-Warning; (Cable Connection) | 1 |
| 18***66 | Film-Warning; (Read Omm) | 1 |
209-0176 Plate & Film Gp
| 18***51 | Film-Warning; (Cable Connection) | 1 |
| 18***72 | Film-Warning; (Read Omm) | 1 |
| 20***76 | Plate & Film Group | 1 |
209-0180 Plate & Film Gp
| 10***09 | Film-Notice; (Radio) | 2 |
| 18***45 | Film-Warning; (Cable Connection) | 1 |
| 18***76 | Film-Warning; (Read Operation Manual) | 1 |
209-0174 Plate & Film Gp
| 10***60 | Film-Notice; (Radio) | 2 |
| 18***49 | Film-Warning; (Cable Connection) | 1 |
| 18***70 | Film-Warning; (Read Omm) | 1 |
209-0185 Plate & Film Gp
| 12***56 | Film-Instruction; (Engine Idle Speed) | 1 |
| 16***70 | Film; (No Step) | 2 |
| 18***35 | Film-Warning; (Cable Connection) | 1 |
223-4797 Plate & Film Gp
| 22***97 | Plate & Film Group | 1 |
209-0177 Plate & Film Gp
| 10***58 | Film-Notice; (Radio) | 2 |
| 18***47 | Film-Warning; (Cable Connection) | 1 |
| 18***73 | Film-Warning; (Read Omm) | 1 |
209-0173 Plate & Film Gp
| 10***57 | Film-Notice; (Radio) | 2 |
| 18***46 | Film-Warning; (Cable Connection) | 1 |
| 18***69 | Film-Warning; (Read Omm) | 1 |
209-0184 Plate & Film Gp
| 12***56 | Film-Instruction; (Engine Idle Speed) | 1 |
| 16***70 | Film; (No Step) | 2 |
| 18***35 | Film-Warning; (Cable Connection) | 1 |
209-0172 Plate & Film Gp
| 10***54 | Film-Notice; (Radio) | 2 |
| 18***41 | Film-Warning; (Cable Connection) | 1 |
| 18***68 | Film-Warning; (Read Omm)(French) | 1 |
209-0181 Plate & Film Gp
| 10***03 | Film-Notice; (Radio) | 2 |
| 15***20 | Film-Notice; (Engine Start) | 1 |
| 15***21 | Plate-Warning; (High Pressure Cylinder) | 2 |
Steering And Braking System
230-1025 Control Gp-Steering & Xmsn
Undercarriage
180-9714 Frame Gp-Track Roller
| 17***66 | Tab As | 10 |
| 18***14 | Frame Group-Track Roller | 1 |
| 25***96 | Frame As; (Rh) | 1 |
174-5914 Frame Gp-Track Roller
| 11***81 | Strip-Wear | 1 |
| 15***28 | Guard As; (Rh. Inner) | 2 |
| 15***30 | Guard As; (Rh. Outer) | 2 |
231-0075 Frame Gp-Track Roller
| 17***77 | Guard As; (Rh)(Rh) | 1 |
| 17***78 | Guard As; (Lh)(Lh) | 1 |
| 17***81 | Guard-Idler | 2 |
174-5921 Guard Gp-Recoil Mechanism
| 17***21 | Guard Group-Recoil Mechanism | 1 |
| 19***78 | Cover Group; (Recoil) | 2 |
| 19***79 | Cover As | 1 |
231-0095 Guard Gp-Recoil Mechanism
| 13***61 | Guard | 2 |
| 16***46 | Guard As; (Rh Inner) | 1 |
| 16***47 | Guard As; (Lh Inner) | 1 |
104-3626 Guard Gp-Idler
| 10***26 | Guard Group-Rock | 1 |
| 17***77 | Guard As; (Rh)(Rh) | 1 |
| 17***78 | Guard As; (Lh)(Lh) | 1 |
174-5924 Guard Gp-Track Guide
| 13***61 | Guard | 2 |
| 17***24 | Guard Group-Track Guide | 1 |
| 27***90 | Guard As; (Rh Inner) | 1 |
276-1705 Guard Gp-Track Guide
| 13***46 | Plate | 4 |
| 15***46 | Bolt-Hex Head; (M12x1.75x300) | 10 |
| 18***21 | Plate | 4 |
276-1765 Guard Gp-Track Guide
| 15***46 | Bolt-Hex Head; (M12x1.75x300) | 10 |
| 18***21 | Plate | 4 |
| 27***80 | Guard As | 2 |
180-9823 Guard Gp-Track Guide -Rotating Bushing Track
| 18***23 | Guard Group-Track Guide; -Rotating Bushing Track | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
| 27***95 | Guard As | 2 |
276-1715 Guard Gp-Track Roller
| 17***04 | Yoke As | 2 |
| 17***72 | Adjuster As; (Rh) | 1 |
| 17***73 | Adjuster As; (Lh) | 1 |
183-2379 Guard Gp-Track Roller
| 17***99 | Stop; (Lh) | 2 |
| 17***00 | Stop; (Rh) | 2 |
| 17***04 | Yoke As | 2 |
231-0105 Idler Gp-Front
| 17***06 | Bearing; (Rh) | 1 |
| 17***07 | Bearing; (Rh) | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 2 |
174-5928 Idler Gp-Front
| 17***28 | Idler Group-Front | 1 |
| 19***09 | Valve-Fill; (Grease) | 2 |
| 1B***67 | Washer; (13.5x50.8x11.1-mm Thk) | 2 |
183-1860 Idler Gp-Front -Rotating Bushing Track
| 17***06 | Bearing; (Rh) | 1 |
| 17***07 | Bearing; (Rh) | 1 |
| 18***60 | Idler Group-Front; -Rotating Bushing Track | 1 |
184-6593 Idler Gp-Track -Lh
| 17***06 | Bearing; (Rh) | 1 |
| 17***07 | Bearing; (Rh) | 1 |
| 18***93 | Idler Group-Track; -Lh | 1 |
209-6489 Idler Gp-Track -Rh
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 20***89 | Idler Group-Track; -Rh | 1 |
184-6592 Idler Gp-Track -Rh
| 17***06 | Bearing; (Rh) | 1 |
| 17***07 | Bearing; (Rh) | 1 |
| 18***92 | Idler Group-Track; -Rh | 1 |
250-0367 Idler Gp-Track
209-6490 Idler Gp-Track -Lh
6y-5407 Link As-Track
312-2274 Link As-Track -Systemone
246-5709 Link As-Track -Systemone
235-2549 Link As-Track -Systemone
161-4000 Link As-Track
227-9976 Link As-Track
227-9960 Link As-Track
312-2269 Link As-Track Box -Link Box
235-2522 Link As-Track Box -Link Box
264-9770 Link As-Track Box -Link Box, Offset
264-9765 Link As-Track Box -Link Box
235-2523 Link As-Track Box -Link Box, Offset
312-2271 Link As-Track Box -Link Box, Offset
237-8201 Roller Gp-Track
6k-9880 Roller Gp-Track Carrier
227-5971 Roller Gp-Track Carrier -Heavy-Duty, Systemone
124-8240 Roller Gp-Track-Double Flange
125-4170 Roller Gp-Track-Double Flange
244-2324 Roller Gp-Track-Single Flange
124-8237 Roller Gp-Track-Single Flange
125-4169 Roller Gp-Track-Single Flange
227-9954 Seal & Bushing Gp-Track
224-2183 Track Ar -Lgp
293-3040 Track Ar -Systemone
224-2184 Track Ar -Lgp
224-2182 Track Ar
180-6165 Track Gp -2 Required
104-8664 Track Gp -2 Required
246-5712 Track Gp -2-Required, Systemone
198-7391 Track Gp -2 Required
235-2550 Track Gp -2-Required, Systemone
104-8663 Track Gp -2 Required
256-4934 Track Gp -2-Required, Systemone
246-5713 Track Gp -2-Required, Systemone
256-4935 Track Gp -2-Required, Systemone
198-6996 Track Gp -2 Required
246-5711 Track Gp -2-Required, Systemone
153-1299 Track Gp -2 Required
256-4938 Track Gp -2-Required, Systemone
256-4936 Track Gp -2-Required, Systemone
235-2552 Track Gp -2-Required, Systemone
256-4939 Track Gp -2-Required, Systemone
235-2551 Track Gp -2-Required, Systemone
231-0065 Undercarriage Ar
220-4347 Undercarriage Ar -Lgp-Rotating Bushing Track
174-5909 Undercarriage Ar -Lgp
231-0085 Undercarriage Ar
183-1882 Undercarriage Ar -Lgp-Rotating Bushing Track
174-5906 Undercarriage Ar -Xl
184-6600 Undercarriage Ar -Xl-Rotating Bushing Track
183-1881 Undercarriage Ar -Xl-Rotating Bushing Track
Work Tools
6y-5837 Edge Gp-Bit & Cutting
| 21***41 | Frame As-Fairlead | 1 |
| 21***42 | Shaft-Roller | 1 |
| 21***43 | Roller Group-Fairlead; -Top | 1 |
6y-5836 Edge Gp-Bit & Cutting
| 15***38 | Edge-Cutting | 2 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 20 |
| 4K***67 | Nut Rear Support To Frame | 20 |
8e-7088 Edge Gp-Bit & Cutting
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 14***91 | Filter-Oil; (Advanced Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
223-4587 Blade Ar-Pwr Angle & Tilt -(Lgp Grade Control)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 2 |
186-4860 Blade Ar-Pwr Angle & Tilt -(Lgp)
| 15***31 | Link Group-Pitch | 1 |
| 18***60 | Blade Ar-Pwr Angle & Tilt; -(Lgp) | 1 |
| 22***71 | Blade Group-Angling; -Xl Grade Control | 1 |
222-4083 Blade Ar-Pwr Angle & Tilt -(Xl Forestry)
| 15***31 | Link Group-Pitch | 1 |
| 22***83 | Blade Ar-Pwr Angle & Tilt; -(Xl Forestry) | 1 |
| 22***78 | Blade Group-Angling; -Lgp Grade Control | 1 |
223-4588 Blade Ar-Pwr Angle & Tilt -(115 Inch)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 1 |
223-4586 Blade Ar-Pwr Angle & Tilt -(Xl Grade Control)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 1 |
186-4861 Blade Ar-Pwr Angle & Tilt -(115 Inch)
| 18***61 | Blade Ar-Pwr Angle & Tilt; -(115 Inch) | 1 |
| 22***85 | Link Group-Pitch | 1 |
| 22***77 | Blade Group-Angling; -(Xl Grade Control) | 1 |
186-4859 Blade Ar-Pwr Angle & Tilt -(Xl)
| 18***59 | Blade Ar-Pwr Angle & Tilt; -(Xl) | 1 |
| 22***85 | Link Group-Pitch | 1 |
| 22***01 | Blade Group-Straight; -(Xl Forestry) | 1 |
185-3581 Blade Ar-Pwr Angle & Tilt -Xl
| 15***31 | Link Group-Pitch | 1 |
| 18***15 | Blade Group-Angling; -(115 Inch) | 1 |
| 18***81 | Blade Ar-Pwr Angle & Tilt; -(Xl) | 1 |
223-4580 Blade Ar-Pwr Angle & Tilt -Xl Grade Control
| 15***31 | Link Group-Pitch | 1 |
| 22***79 | Blade Group-Angling; -(115 Inch Grade Control) | 1 |
| 22***80 | Blade Ar-Pwr Angle & Tilt; -Xl Grade Control | 1 |
183-4248 Blade Gp-Angling -(Xl)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***97 | Edge Group-Bit & Cutting | 1 |
183-7383 Blade Gp-Angling -(Lgp)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 1 |
184-5415 Blade Gp-Angling -(115 Inch)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 1 |
223-4579 Blade Gp-Angling -(115 Inch Grade Control)
| 20***31 | Sun Gear | 1 |
| 21***68 | Brake Group-Winch; (Refer To Page 8) | 1 |
| 21***69 | Planetary Group-Winch; (Refer Below) | 1 |
223-4578 Blade Gp-Angling -Lgp Grade Control
| 11***86 | O-Ring | 2 |
| 21***66 | Brake & Planetary Group-Winch; (Refer To Page 7) | 1 |
| 22***78 | Blade Group-Angling; -Lgp Grade Control | 1 |
223-4571 Blade Gp-Angling -Xl Grade Control
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***97 | Edge Group-Bit & Cutting | 1 |
223-4577 Blade Gp-Angling -(Xl Grade Control)
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 1 |
183-9066 Blade Gp-Angling -Xl
| 15***51 | Spacer | 2 |
| 15***52 | Spacer | 4 |
| 17***55 | Cap; (Bearing) | 1 |
222-4001 Blade Gp-Straight -(Xl Forestry)
| 12***21 | Disc; (Friction) | 6 |
| 20***18 | Housing; (Brake) | 1 |
| 20***20 | Spring Backup Plate | 1 |
208-5548 Brake & Planetary Gp-Winch
| 05***78 | Dowel Pin | 2 |
| 20***08 | Kicker Block; (Rh) | 1 |
| 20***09 | Kicker Block; (Lh) | 1 |
211-8166 Brake & Planetary Gp-Winch
| 05***78 | Dowel Pin | 2 |
| 20***08 | Kicker Block; (Rh) | 1 |
| 20***09 | Kicker Block; (Lh) | 1 |
211-8168 Brake Gp-Winch
| 16***22 | Clutch-Freespool; (34-Teeth) | 1 |
| 16***75 | Freespool Spring | 1 |
| 16***80 | Retaining Ring | 1 |
208-5546 Case Gp-Winch
| 18***95 | Hose As | 1 |
| 18***96 | Hose As | 1 |
| 18***97 | Hose As | 1 |
208-5552 Clutch & Gear Gp-Winch
| 20***52 | Clutch & Gear Group-Winch | 1 |
| 21***02 | Pump Group-Piston | 1 |
222-5677 Control Gp-Winch
| 22***77 | Control Group-Winch | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 22 |
| 4K***67 | Nut Rear Support To Frame | 22 |
187-1713 Conversion Gp-Winch -Fairlead Roller
| 18***13 | Conversion Group-Winch; -Fairlead Roller | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 18 |
| 4K***67 | Nut Rear Support To Frame | 18 |
221-8515 Drive Ar-Winch
| 22***15 | Drive Ar-Winch | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 20 |
| 3G***06 | Edge-Cutting | 2 |
179-2897 Edge Gp-Bit & Cutting
| 11***16 | Retaining Ring | 1 |
| 11***95 | Retaining Ring | 1 |
| 12***10 | Spacer; (2x2.75x0.125-In Thk)(3.18mm Thk) | 2 |
187-1710 Fairlead Gp-Winch
| 18***10 | Fairlead Group-Winch | 1 |
| 1F***71 | Bearing-Ball (Note D) | 1 |
| 1S***43 | Ball Bearing | 1 |
201-2744 Filter Gp-Oil -Hydraulic
| 17***15 | Pump Group-Piston; -Slipper | 1 |
| 20***44 | Filter Group-Oil; -Hydraulic | 1 |
| 21***04 | Mounting Group-Pump | 1 |
208-5551 Gear Gp-Winch
| 20***29 | Motor Group-Piston; -Winch | 1 |
| 20***51 | Gear Group-Winch | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
211-8171 Gear Gp-Winch Transfer
| 21***71 | Gear Group-Winch Transfer; (Refer To Page 6) | 1 |
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
221-2956 Installation Ar-Winch
| 22***56 | Installation Ar-Winch | 1 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
208-5549 Motor & Mtg Gp-Winch
| 20***49 | Motor & Mtg Group-Winch | 1 |
| 3E***56 | Washer-Hard; (17.5x30x6-mm Thk) | 2 |
| 7J***85 | Seal-O-Ring | 1 |
292-0303 Mounting Gp-Mast -Satellite Receiver
| 13***56 | Plate | 1 |
| 21***57 | Pin-Drawbar | 1 |
| 29***03 | Mounting Group-Mast; -Satellite Receiver | 1 |
292-0302 Mounting Gp-Mast -Laser Receiver
| 17***31 | Bar | 4 |
| 18***84 | Plate As; (Rh) | 1 |
| 18***38 | Pin | 4 |
217-2004 Mounting Gp-Pump
| 12***86 | Roller Bearing | 6 |
| 12***07 | Bearing Race, Line | 6 |
| 20***29 | Carrier-Planetary | 1 |
189-3275 Mounting Gp-Ripper
| 18***75 | Mounting Group-Ripper | 2 |
| 18***76 | Ripper Group | 1 |
| 19***91 | Cylinder Group-Ripper; (Rh Riphead) | 1 |
208-5553 Mounting Gp-Winch
| 17***31 | Bar | 4 |
| 18***63 | Frame As | 1 |
| 18***77 | Link As | 1 |
211-8169 Planetary Gp-Winch
| 21***69 | Planetary Group-Winch; (Refer Below) | 1 |
| 21***10 | Roller-Fairlead | 1 |
| 21***11 | Bearing | 2 |
186-6421 Ripper Ar
| 18***21 | Ripper Ar | 1 |
| 21***11 | Bearing | 2 |
| 21***12 | Wiper | 2 |
189-3276 Ripper Gp
| 16***17 | Drag Brake Disc | 1 |
| 18***76 | Ripper Group | 1 |
| 1J***34 | Seal-Lip Type | 2 |
214-9543 Roller Gp-Fairlead -Top
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***57 | Shank-Ripper | 1 |
214-9545 Roller Gp-Fairlead -Top
| 15***69 | Hose; (-4, Orfs) (20in) (508mm) (Payout Port To Brake Valve Br Port) | 1 |
| 15***05 | Hose As., -6 X 27 In. (685.8 mm) | 1 |
| 1Y***74 | Capscrew; (Socket Hd 3/8-16x2-1/2 Gd8) | 3 |
208-5547 Shaft Gp-Winch Drum
| 20***46 | Case Group-Winch | 1 |
| 20***47 | Shaft Group-Winch Drum | 2 |
| 20***48 | Brake & Planetary Group-Winch | 1 |
9j-1137 Tooth Gp-Ripper
| 22***62 | Cover; (Idle) | 1 |
| 22***63 | Cover; (Fuel) | 1 |
| 9J***37 | Tooth Group-Ripper | 1 |
208-5550 Valve & Lines Gp-Winch
| 20***73 | Film-Stripe; (Cat, Hood, Lh) | 1 |
| 20***74 | Film-Stripe; (Cat, Hood, Rh) | 1 |
| 20***75 | Film-Stripe; (Lgp) | 1 |
179-9513 Winch Ar
| 17***13 | Winch Ar | 1 |
| 20***73 | Film-Stripe; (Cat, Hood, Lh) | 1 |
| 20***74 | Film-Stripe; (Cat, Hood, Rh) | 1 |
D5G serial number reference
The PIN/serial number plate on a D5G is on the left side of the machine, on the engine compartment just ahead of the cab (some units also have the number stamped into the frame as a backup). The full Product Identification Number is a 17-character string; the machine's build serial -- a 3-letter prefix plus a sequential number, for example WGB01070 or RKG01070 -- makes up the trailing 8 characters of that PIN. Match the 3-letter prefix to the model/configuration table, then use the number that follows to place the machine within that build run.
| Prefix | Identifies | Notes |
|---|---|---|
| WGB | D5G XL | XL (extra-long, standard-gauge) undercarriage configuration of the D5G hydrostatic-drive track-type tractor. Listed as WGB1-Up in the D5G XL & LGP parts manual grouping alongside the LGP prefix RKG. Powered by the Tier 2 turbocharged Cat 3046T engine, about 67 kW (90 hp) net. D5G launched around 2001; WGB-prefixed machines are seen in listings from the early to mid-2000s. |
| RKG | D5G LGP | LGP (low ground pressure) undercarriage configuration of the D5G hydrostatic-drive track-type tractor, fitted with wider track shoes for reduced ground bearing pressure versus the XL. Listed as RKG1-Up in the same D5G XL & LGP parts manual grouping as WGB. Same Tier 2 turbocharged Cat 3046T engine and hydrostatic transmission/steering as the XL. D5G launched around 2001; RKG-prefixed machines fall in the same early-to-mid-2000s window as WGB. |
Frequently asked questions
What engine powers the Caterpillar D5G?
The D5G uses the Cat 3046T, a turbocharged inline six-cylinder diesel rated at approximately 90 hp (67 kW) net power, about 99 hp gross, certified to Tier 2 / Stage II emissions standards.
What is the operating weight of the Caterpillar D5G?
Operating weight runs roughly 8.9 to 9.3 tonnes (about 19,600 to 20,550 lb), varying by Standard, XL, or LGP undercarriage configuration.
What replaced the Caterpillar D5G?
Cat carried the hydrostatic small-dozer architecture forward into later small-dozer generations with updated engines and emissions tiers. The D5G should not be confused with the unrelated new-generation D5 introduced in 2019 onward, which uses a C7.1 engine on a different, larger chassis.
What D5G owners discuss
What's the most talked-about hydrostatic-drive weakness on the D5G?
Techs and owners point most often to the coupling linking the front and rear hystat pump. It's a plastic drive coupling on the pump-to-pump connection, and when the splines strip, both pumps lose charge pressure and the machine stops moving, often without warning. The second recurring complaint is calibration drift: over time the hystat pumps and drive motors fall out of calibration, so the machine gets sluggish or won't reach its top speed range. That calls for a dealer recalibration with Cat ET, not a field adjustment.
Why won't the parking brake release on some D5G units, and is it safe to keep running?
Reported causes vary: low voltage reaching the park-brake solenoid, a poppet stuck inside the brake valve body, a failed park-brake switch, or a broken drive coupling on the rear charge pump that kills the charge pressure needed to release the brake hydraulically. Corroded or loose wiring connectors get blamed as often as the solenoid itself. Because this circuit also functions as the machine's parking/secondary brake, have your dealer verify the diagnosis and repair before returning the machine to work.
What undercarriage wear patterns show up on the D5G?
The G-series uses Cat's rotating-bushing track design, letting the bushing rotate against the sprocket instead of the pin, which spreads wear more evenly across links and bottom rollers. XL and LGP undercarriages wear differently - the wider LGP shoes spread ground load for flotation, but there's more surface to inspect and maintain. Reported undercarriage life runs anywhere from a few thousand hours to well beyond that depending on ground conditions, shoe width, and tension maintenance - treat any single hour figure as a rough reference, not a guarantee. Track shoes, idlers, sprockets, and rollers are consistently cited as the priciest wear items to replace.
What engine quirks come up with the D5G's 3046T?
The 3046T is a Mitsubishi-derived block shared across the D3G/D4G/D5G line, tuned to a different power output in each machine. Oil pan and rear-main-seal leaks are a common age-related complaint. Injector wear shows up as black smoke on startup or under load, sometimes with visible injector drip. None of this is unique to the D5G application - it's the same wear pattern reported across the whole G-series small-dozer engine family.
What electrical and sensor problems come up most on the D5G?
Track speed sensors are a recurring failure point - oil works into the sensor and its connector over time and throws drive-related fault codes. Replacing one usually means recalibrating the hystat system afterward so the machine tracks straight. Owners also describe the hystat electronics as sensitive to system voltage - if charging voltage drifts out of its normal running range, the machine can behave erratically, so an alternator or wiring fault can masquerade as a transmission problem. Corroded or loose harness connectors get blamed for a good share of unexplained warning lights.
What's the overall owner consensus on D5G reliability?
Reactions run positive on the base machine with more caveats around hystat upkeep. Some owners log a couple thousand hours with no complaints, and like it as an easy, clutch-free machine to run since one joystick handles speed and direction while the other runs the blade. Others report needing hystat recalibration, drive-motor attention, cylinder bushing work, and thermostat or alternator replacement somewhere in the 5,000 to 6,500-hour range - normal wear-item turnover for a machine at that age rather than a design flaw. General consensus: well liked for finish grading and light dozing, but the hydrostatic system needs a dealer visit periodically rather than being fully field-serviceable.
What should a buyer check before purchasing a used D5G?
Start the engine cold and watch idle stability, smoke, and throttle response - heavy black smoke at startup points to injector wear. Run the machine through its full speed range in both directions; a machine stuck in a low speed step or slow to respond suggests the hystat needs recalibration. Check charging voltage while running, since voltage swings can cause electrical quirks that mimic drivetrain faults. With the machine in neutral, watch the parking brake light and any ECM warning light - a light that won't clear points to an undisclosed fault. Walk the full undercarriage checking shoe and link wear, roller and idler seal condition, and sprocket tooth wear, and compare that wear against the hour meter for consistency. Have your dealer pull the fault code history and verify hystat calibration before finalizing the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific D5G part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.