Caterpillarpaving compactorvibratory compactor
Caterpillar CS-74
Maintenance schedule, common problems & OEM parts breakdown
The Cat CS74 is a mid-size single-drum vibratory soil compactor built for subgrade, embankment, and base compaction rather than asphalt mat paving; Caterpillar classifies it alongside the smaller CS56 and CS64 in its vibratory soil compactor line. It ran from roughly 2008 through 2014 on the Cat C6.6 ACERT electronic diesel, rated at 116 kW (158 hp) gross and about 108 kW (147 hp) net. Operating weight runs from about 15.1 tonnes (33,300 lb) in open-platform smooth-drum form up to roughly 17.1 tonnes (37,700 lb) with a full cab, leveling blade, and padfoot shell kit fitted together; exact figures vary by configuration. Caterpillar offered it as the smooth-drum CS74 or the factory padfoot CP74, with an open ROPS/FOPS canopy or an enclosed ROPS/FOPS cab with air conditioning, plus optional leveling blade, bolt-on padfoot shell kit, variable vibration frequency, and AccuGrade GPS compaction measurement. Documented sources do not tie a specific named predecessor to the CS74 designation; Caterpillar replaced it with the CS74B, a Tier 4 Final machine.
This generation's main change from prior Cat single-drum compactors was the move to the C6.6 ACERT engine paired with sealed, pod-style eccentric weight housings that dropped scheduled vibratory oil sampling and stretched the engine oil change interval to 500 hours and the hydraulic oil interval to roughly 2000 hours. A dual-pump propel system, delivering separate hydraulic flow to the drum motor and rear axle, gave the CS74 stronger gradeability and traction control than earlier single-pump designs, and the one-piece tilting hood grouped daily service points at ground level on one side of the machine. The follow-on CS74B moved to Tier 4 Final emissions with a C4.4 or C7.1 engine depending on market and source, adding aftertreatment hardware. That split keeps the pre-Tier 4 Final CS74 in demand on the used and parts market: buyers wanting to avoid DPF and SCR complexity, or needing drop-in parts commonality across the CS56/CS64/CS74 family's shared final drives, vibratory pods, and hydraulic architecture, still look to this generation first.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CS-74 specifications
Engine
| Engine model (CS74, 2008-2014 series) | Cat C6.6 electronic diesel with ACERT, 4-stroke, 6 cylinders |
| Displacement (CS74) | 6.6 L (402.8 in3), bore 105 mm x stroke 127 mm |
| Gross power (CS74) | 116 kW (158 hp) @ 2200 rpm |
| Net power (CS74) | 108 kW (147 hp), per EEC 80/1269 and ISO 9249 |
| Emissions tier (CS74) | Meets 97/68/EC Stage IIIA (Tier 3 equivalent) |
| Engine model (CS74B, later series) | Cat C4.4 with ACERT, 4-stroke, 4 cylinders |
| Displacement (CS74B) | 4.4 L (268.5 in3), bore 105 mm x stroke 127 mm |
| Gross power (CS74B) | 131.0 kW (175 hp) per SAE J1995; engine power 129.4 kW (173.5 hp) per ISO 14396 |
| Net power (CS74B) | 109.7 kW (147.1 hp) per ISO 9249; 108.3 kW (145.2 hp) per SAE J1349 |
| Emissions tier (CS74B) | U.S. EPA Tier 4 Final, EU Stage IV |
| Note on engine change | The B-series moved from the larger 6-cylinder C6.6 to a smaller 4-cylinder, more heavily turbocharged C4.4 while raising net power, typical of the Tier 4 Final generation change |
Weights
| Operating weight, CS74 w/ ROPS/FOPS cab and AC | 15,685 kg (34,580 lb) |
| Operating weight, CS74 w/ open platform | 15,145 kg (33,389 lb) |
| Operating weight, CS74 cab w/ leveling blade | 15,651 kg (34,502 lb) |
| Operating weight, CS74 cab w/ padfoot shell kit | 16,458 kg (36,281 lb) |
| Operating weight, CS74 cab w/ blade and shell kit | 17,121 kg (37,753 lb) |
| Weight at drum, CS74 cab | 10,150 kg (22,377 lb); open platform 10,010 kg (22,068 lb) |
| Operating weight, CS74B w/ ROPS/FOPS cab | 16,000 kg (35,264 lb) |
| Operating weight, CS74B w/ padfoot shell kit | 17,395 kg (38,338 lb) |
| Operating weight, CS74B w/ leveling blade | 16,645 kg (36,687 lb) |
| Operating weight, CS74B w/ blade and shell kit | 18,050 kg (39,777 lb) |
| Weight at drum, CS74B cab | 10,620 kg (23,410 lb); w/ padfoot shell kit 12,020 kg (26,494 lb); w/ leveling blade 11,580 kg (25,517 lb); w/ blade and shell kit 12,980 kg (28,603 lb) |
| Static linear load / ground pressure, CS74 | 46.9 kg/cm open platform, 47.7 kg/cm w/ cab and AC |
| Static linear load / ground pressure, CS74B | 49.7 kg/cm (278.7 lb/in) w/ ROPS/FOPS cab |
| Shipping weight | Not separately published in factory literature; operating weight configurations above are the documented figures. Verify exact crated/transport weight with a dealer for the specific serial and configuration |
Dimensions
| Overall length, CS74 | 5.97 m (19.6 ft); with optional leveling blade 6.52 m (21.4 ft) |
| Overall width, CS74 | 2.3 m (7.55 ft); with optional leveling blade 2.5 m (8.2 ft) |
| Height, CS74 | 3.07 m (10.1 ft), same for ROPS/FOPS canopy or cab |
| Wheelbase, CS74 | 2.9 m (9.5 ft) |
| Ground clearance, CS74 | 537-555 mm (21.1-21.9 in) depending on configuration |
| Curb clearance, CS74 | 490-510 mm (19.3-20.1 in) |
| Drum width, CS74 | 2.13 m (84 in) |
| Drum diameter, CS74 | 1.524 m (60 in); over pads with shell kit 1.746 m (68.7 in) |
| Turning radius, CS74 | Inside 3.68 m (12.1 ft); outside 5.81 m (19.1 ft) |
| Overall length, CS74B | 6.1 m (19.9 ft); with optional leveling blade 6.6 m (21.5 ft) |
| Overall width, CS74B | 2.3 m (7.6 ft); with optional leveling blade 2.5 m (8.3 ft) |
| Overall height, CS74B | 3.1 m (10.2 ft) |
| Wheelbase, CS74B | 2.9 m (9.5 ft) |
| Ground clearance, CS74B | 437 mm (17.2 in) |
| Curb clearance, CS74B | 489 mm (19.3 in) |
| Drum width, CS74B | 2134 mm (84 in) |
| Drum diameter, CS74B | 1534 mm (60.4 in); drum shell thickness 40 mm (1.6 in) |
| Turning radius, CS74B | Inside 3.7 m (12.1 ft) |
| Optional leveling blade height | 688 mm (27.1 in), CS74B; 680 mm (26.8 in), CS74 |
| Hitch articulation / oscillation angle | 34 degrees articulation, 15 degrees oscillation on both series |
Performance
| Travel speed, CS74 (forward or reverse) | Low range 5.7 km/h (3.5 mph); high range 11.4 km/h (7.1 mph), same for smooth or padfoot drum |
| Travel speed, CS74B (max, forward or reverse) | 11.4 km/h (7 mph) |
| Gradeability | CS74B: theoretical gradeability with or without vibration 59%. Not published as a numeric figure for the earlier C6.6-powered CS74; that series is described only in qualitative terms for its dual-pump propel gradeability |
| Vibration frequency, CS74 | Standard 30 Hz (1800 vpm); optional variable range 23.3-30 Hz (1400-1800 vpm) |
| Vibration frequency, CS74B | Standard 28 Hz (1680 vpm); Eco-mode 25.5 Hz (1527 vpm); optional variable range 23.3-28 Hz (1400-1680 vpm) |
| Nominal amplitude, CS74 | High 1.8 mm; low 0.9 mm |
| Nominal amplitude, CS74B | High 2.1 mm (0.083 in); low 0.98 mm (0.039 in), at 28 Hz |
| Centrifugal force, CS74 | Maximum 332 kN (74,600 lb) at 30 Hz; minimum 166 kN (37,300 lb) |
| Centrifugal force, CS74B | Maximum 335 kN (75,234 lb) at 30.5 Hz (1830 vpm); minimum 156 kN (35,163 lb) |
| Steering | Priority-demand hydraulic power-assist steering, 34 degree steering angle each direction, 15 degree oscillation each direction |
Service capacities (summary)
| Fuel tank, CS74 | 300 L (79 gal) nominal; full fuel capacity 345 L (91 gal) |
| Cooling system, CS74 | 22.8 L (6 gal) |
| Engine oil w/ filter, CS74 | 17.4 L (4.6 gal) |
| Eccentric weight housings (combined), CS74 | 26 L (6.9 gal) |
| Axle and final drives, CS74 | 18 L (4.8 gal) |
| Hydraulic tank, CS74 | 90 L (23.8 gal) |
| Fuel tank, CS74B | 332 L (88 gal) total capacity |
| Diesel exhaust fluid, CS74B | 19 L (5 gal) refill capacity |
| Cooling system, CS74B | 28.2 L (7.5 gal) |
| Engine oil w/ filter, CS74B | 11.6 L (3.1 gal) |
| Eccentric weight housings (combined), CS74B | 26 L (6.9 gal) |
| Axle and final drives, CS74B | 18 L (4.8 gal) |
| Hydraulic tank, CS74B | 50 L (13.2 gal) service refill |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CS-74 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | CS-74 (Cat C6.6 ACERT engine, Stage IIIA generation): 17.4 L (4.6 US gal). CS-74B (Cat C4.4 engine, Tier 4 Final/Stage IV generation): 11.6 L (3.1 US gal). Capacity varies by engine/series. | Cat DEO or Cat DEO-ULS multigrade Diesel Engine Oil. Viscosity by climate: SAE 10W-30 for -18C to 40C (0F to 104F); SAE 15W-40 for -9.5C to 50C (15F to 122F); SAE 5W-40 for -30C to 50C (-22F to 122F) in colder regions; SAE 0W-40 for extreme cold down to -40C (-40F). Commercial oil alternative must meet Cat ECF-1-a, ECF-2, or ECF-3 specification. |
| Cooling system | CS-74: 22.8 L (6.0 US gal). CS-74B: 28.2 L (7.5 US gal). Varies by engine/series. | Cat ELC (Extended Life Coolant) preferred, factory fill on current models; 6-year/12,000-hour service life. Cat DEAC (Diesel Engine Antifreeze/Coolant) is the acceptable conventional alternative, 3-year/3,000-hour service life. Mix 1:1 with distilled or deionized water, minimum 30 percent glycol; 50 percent concentration gives freeze protection to -37C (-34F). |
| Fuel tank | CS-74: usable 300 L (79.3 US gal), full fuel capacity 345 L (91.1 US gal). CS-74B: 332 L (88 US gal) total capacity. | Ultra Low Sulfur Diesel (ULSD, 15 ppm sulfur or less) meeting the Cat distillate diesel fuel specification. Biodiesel blends acceptable up to B5-B20 depending on engine tier per Cat biodiesel guidance. |
| Diesel Exhaust Fluid (DEF) | CS-74B only (Tier 4 Final/Stage IV with SCR aftertreatment): 19 L (5.0 US gal). Not applicable to earlier CS-74 (Stage IIIA, no aftertreatment DEF requirement). | DEF meeting ISO 22241, a 32.5 percent urea solution. |
| Eccentric weight housings / vibratory system (combined) | CS-74 and CS-74B: 26 L (6.9 US gal) combined. | Cat Synthetic Compactor Oil, a full synthetic PAO gear and bearing lubricant with no viscosity improvers, ISO viscosity grade 220, minimum viscosity index 152, usable -20C to 50C (-4F to 122F). No scheduled oil sampling required on the pod-style weight housings; 3-year/3,000-hour lube service interval. |
| Axle and final drives | CS-74 and CS-74B: 18 L (4.8 US gal). | Cat TDTO (Transmission/Drive Train Oil) meeting the Cat TO-4 specification. Viscosity by climate: SAE 10W for -25C to 15C; SAE 30 for -20C to 43C (-4F to 110F); SAE 50 for 10C to 50C (50F to 122F); or Cat TDTO-TMS synthetic-blend multi-season oil for a wide -30C to 43C (-22F to 110F) range. |
| Hydraulic system and tank | CS-74: 90 L (23.8 US gal) service refill. CS-74B: 50 L (13.2 US gal) service refill. Capacity varies notably by series. | Cat HYDO Advanced 10 (SAE 10W) preferred, usable -20C to 40C (-4F to 104F); gives extended 3,000-hour drain interval. Cat BIO HYDO Advanced biodegradable HEES hydraulic fluid available as a factory fill option (EU Ecolabel approved). Alternate climate/second-choice oils include Cat HYDO, Cat TDTO, Cat MTO, or Cat DEO. |
| Grease (specification only) | Not a fluid reservoir; lubricated via grease fittings at articulation, cylinder pins, and bearing points as equipped. Articulation hitch bearings are sealed-for-life on this model and do not require greasing. | Cat Ultra 5Moly Grease (NLGI 1-2, calcium sulfonate complex with 5 percent moly) for heavily loaded pins and bearings; Cat Advanced 3Moly Grease (NLGI 2, lithium complex with 3 percent moly) for medium-load points; Cat Multipurpose Grease (NLGI 2, lithium complex) for low-severity, moderate-temperature points. Grade selection by load factor and ambient temperature per the compactor grease-application guidance. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CS-74 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the CS-74 beyond the schedule
Predictive Maintenance and Fluid Analysis
Run scheduled oil sampling on the C6.6 ACERT engine at 250 hours, and on the rear axle, hydraulic tank, and vibratory support housing at 500 hours. Trending these catches turbo, injector, and pod-bearing wear before failure. Pull a Level 1 coolant sample at 250 hours, a Level 2 sample at the initial 500-hour fill, then annually. The sealed eccentric weight pods carry no scheduled sampling of their own, so lean on vibratory support oil analysis and drum vibration feel to judge bearing condition between 3000-hour housing oil changes.
Corrective and Common Repairs
Most field repairs on the CS74 trace back to the dual-pump propel system: uneven flow between the drum motor and rear-wheel motor shows up as pulling to one side or spin-out on grade, usually a pump or flushing-valve fault rather than the C6.6 engine. Check the rubber isolation mounts under the vibratory frame for cracking; a failed mount transmits vibration into the chassis and accelerates hose and bracket fatigue. Sealed-for-life articulation hitch bearings rarely need attention; if the hitch binds, suspect the safety lock first, not the pins.
Overhaul and Rebuild Points
Eccentric weight pods are the CS74's core wear item: budget a bearing and seal overhaul once oil analysis or drum vibration drifts, beyond the standard 3000-hour housing oil change. Final drive planetaries at the drum and rear axle are the next likely rebuild point, especially on machines worked hard on grade through the dual-pump propel system. The C6.6 ACERT engine itself is a comparatively simple mid-life rebuild - injectors, turbocharger, valve train - without the DPF or SCR hardware fitted to later Tier 4 Final machines in this class.
Seasonal and Environment Servicing
Dusty subgrade and base work loads the rear-mounted radiator and hydraulic oil cooler fast; clean the core every shift in dry, dusty conditions rather than waiting for the 250-hour interval. Drain fuel tank water and sediment weekly, more often in wet-season work. Cold-climate starts benefit from the engine's thermal starting aid, but confirm coolant is current on the ELC extender/change schedule (6000 hours/3 years, full change at 12,000 hours/6 years) before winter. Check tire inflation weekly, since temperature swings shift pressure on this machine's drive tires.
CS-74 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 256-7902 | Filter Element As-Air | Air intake service | Check fitment → |
| 256-7903 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CS-74 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-3 | Engine oil pressure sensor circuit, voltage above normal range | Open circuit, damaged harness, or failed oil pressure sensor on the C6.6 ACERT engine | Confirm actual oil pressure with a mechanical gauge before condemning the sensor, then inspect sensor wiring and connector for damage or corrosion |
| 110-3 | Engine coolant temperature sensor circuit, voltage above normal range | Open or corroded sensor circuit, damaged connector, or failed coolant temperature sensor | Inspect sensor connector and wiring, check coolant level, verify sensor resistance against spec before replacing |
| 168-2 | Electrical system voltage erratic, intermittent, or incorrect | Loose or corroded battery terminals, failing alternator/voltage regulator, or a parasitic draw | Check battery terminals and grounds, load-test batteries, verify charging system output |
| 190-2 | Engine speed/timing sensor signal erratic, intermittent, or incorrect | Sensor air gap out of specification, debris on sensor tip, or damaged wiring | Inspect and clean the speed/timing sensor, verify air gap, check harness continuity |
| 247-9 | SAE J1939 data link, abnormal update rate (communication loss between control modules) | Damaged, loose, or corroded data link connector/wiring between the engine ECM and the machine control module | Inspect data link wiring and connectors, confirm both modules have power and ground, verify communication with Cat ET |
| 1-5 | Cylinder #1 injector solenoid circuit, open circuit | Damaged injector wiring harness or a failed injector solenoid on the ACERT fuel system | Check injector harness continuity, cross-test the injector on another cylinder, replace the injector if confirmed faulty |
| SPN 168 FMI 1 | Battery/system voltage below normal range (J1939 format used on the Tier 4 Final C7.1-powered B-series) | Weak or discharged battery, charging system fault, or corroded ground connection | Test battery condition and charging system output, clean and tighten ground connections |
| SPN 2650 FMI 7 | Aftertreatment/DPF differential pressure sensor not responding as expected | Blocked, kinked, or moisture-filled DPF sensor hoses, or a disconnected/failed pressure sensor, on the C7.1 aftertreatment system | Inspect DPF sensor hoses for blockage or condensation, check sensor connector, verify with Cat ET before replacing the sensor |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CS-74 attachments & work tools
Padfoot shell kit (drum conversion)
Bolt-on curved steel pad segments convert the standard 2.13 m (84 in) smooth drum for compacting cohesive and semi-cohesive soils; kit includes shells, mounting hardware, and bumper-mounted scrapers. Fitting the kit raises operating weight from roughly 16,000 kg (35,264 lb) to about 17,400 kg (38,338 lb), so it is treated as a factory or dealer-fit option rather than a quick-change tool.
Compaction control / measurement systems
Factory-integrated Cat Compaction Control offers Compaction Meter Value (CMV), an accelerometer-based system reading 1.0-1.2 m (3-4 ft) deep, and Machine Drive Power (MDP), which reads rolling resistance closer to the surface at 0.3-0.6 m (1-2 ft). Both can be combined on one machine, and GNSS mapping (SBAS or RTK) is available to overlay pass-count and stiffness data.
Scraper and edge-cleaning package
A front adjustable steel scraper is standard for keeping the drum face clean and preserving overlap visibility. Optional rear-side steel scraper and front/rear polyurethane scraper sets are offered for different material stickiness, and scraper hardware is also bundled with the padfoot shell kit.
Grading blade
A leveling/dozer-style blade is offered as an option on this compactor class for site cleanup and light grading between compaction passes. On the earlier (pre-B) CS74 a blade option was documented at roughly 685 mm (27 in) height, adding to overall machine length and width when fitted; treat exact blade dimensions as varying by configuration/series.
Cab, canopy, and operator station options
Machines are offered with an enclosed cab, a ROPS/FOPS canopy, or a steel sun canopy, each with a different operating weight. Cab units add climate control, glass panels, a pre-wire for radio, and an optional deluxe high-back cloth or air-ride seat; canopy machines use the standard rotating cloth seat.
Lighting, visibility, and guarding options
Optional upgrades include a halogen light package, rotating beacon, extra rear-view mirrors, and a transmission guard for underside protection. These are dealer/factory-installed options rather than field-swappable attachments.
Vibratory system (fixed, not a swappable tool)
The pod-style vibratory system runs a single frequency near 28 Hz with amplitude around 2.1 mm on the current smooth-drum model, generating roughly 330 kN centrifugal force; the compactor also supports high/low amplitude selection on other members of this size class. Amplitude/frequency figures vary by series and should be confirmed against the specific unit's spec sheet.
Fluids and monitoring add-ons
Optional bio-oil factory fill is available for the hydraulic system in environmentally sensitive work, and Product Link telematics can be factory fitted for remote machine monitoring. Italian Road Homologation (IRH) is offered as a regional compliance package rather than a work tool.
Mounting/coupler system note
This is a self-propelled single-drum vibratory compactor, not an excavator- or loader-style carrier, so there is no quick-coupler interface; drum shell kits and blades bolt directly to the drum shell or frame using dedicated mounting hardware supplied with each kit.
All CS-74 assemblies by section
Every catalogued assembly group for the Caterpillar CS-74. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
270-8357 Air Cleaner Gp
| 27***57 | Air Cleaner Group | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
| 30***80 | .. Bushing, Filter Group-Fuel; (Ultra High Efficiency) | 1 |
260-0312 Air Cleaner Gp
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
262-0764 Lines Gp-Air
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 26***64 | Lines Group-Air | 1 |
| 27***20 | Bowl As; (Fuel, Water Separator) | 1 |
288-3582 Manifold Gp-Inlet
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
| 16***08 | Lamp-Led; (24-Volt, White)(Fuel Level Gauge) | 1 |
| 28***82 | Manifold Group-Inlet | 1 |
262-0751 Muffler Gp
| 26***51 | Muffler Group | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
285-3414 Turbocharger Gp
| 27***39 | Seal | 1 |
| 28***14 | Turbocharger Group, Engine Oil Pump; In Alternative, Engine Oil Pump; Oil Pump Assembly; Alternate Part To 48***80, Engine Oil Pump; Alternative, Engine Oil Pump; Alternate, Serial Range: Part-48***80, Engine Oil Pump; In Alternative, Engine Oil Pump; In Alternative, Engine Oil Pump; Oil Pump Assembly; Alternate, Serial Range: Part-48***80 | 1 |
| 28***37 | Washer | 1 |
Basic Engine
286-7842 Adapter Gp-Auxiliary Drive
| 10***73 | Seal-O-Ring | 1 |
| 10***75 | Bearing | 1 |
| 10***76 | Clip | 1 |
279-8837 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***25 | Tappet | 12 |
| 27***26 | Rod-Push | 12 |
277-5018 Cover Gp-Valve Mechanism
| 10***66 | Clamp-Hose | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
345-6925 Cover Gp-Valve Mechanism
| 06***43 | Plug-Side-(1.251 Dia.) | 5 |
| 10***41 | Bolt; (M6x1x10-mm) | 6 |
| 18***84 | Dowel | 2 |
279-8762 Crankshaft Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
279-8711 Cylinder Block Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
306-6845 Cylinder Block Gp
| 17***41 | Head-Gasket | 1 |
| 27***15 | Cylinder Head As | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
309-6663 Cylinder Head As
| 15***55 | Adapter | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 19***03 | Elbow As | 1 |
276-8115 Cylinder Head As
| 17***41 | Head-Gasket | 1 |
| 27***15 | Cylinder Head As | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
279-8821 Cylinder Head Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 27***21 | Cylinder Head Group | 1 |
| 28***26 | Pulley | 1 |
291-2513 Drain Gp-Engine Oil
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 12 |
| 29***12 | Flywheel As | 1 |
260-0325 Drain Gp-Engine Oil
| 26***25 | Drain Group-Engine Oil | 1 |
| 3E***95 | Flange | 1 |
| 5L***94 | Bolt-Socket Head; (3/8-24x1.5-In) | 8 |
291-2515 Drive Gp-Fan
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 19***08 | Plug | 1 |
262-2961 Drive Gp-Pump
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
291-2526 Flywheel Gp
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
281-6332 Housing Gp-Flywheel
| 27***44 | Plate-Lifting | 1 |
| 27***45 | Plate-Lifting | 1 |
| 28***32 | Housing Group-Flywheel | 1 |
281-8964 Housing Gp-Front
| 27***48 | Support-Engine | 2 |
| 28***64 | Housing Group-Front | 1 |
| 7C***49 | Mount As | 2 |
277-4446 Lifting Gp-Engine
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 18***55 | Clip | 1 |
| 27***83 | Seal; (Sump Drain Plug) | 1 |
286-7844 Mounting Gp-Engine
| 12***36 | Ring-Retaining | 2 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
| 27***75 | Piston As | 6 |
260-0319 Mounting Gp-Engine Flexible
| 26***19 | Mounting Group-Engine Flexible | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
313-6578 Pan Gp-Oil
| 27***30 | Damper | 1 |
| 27***31 | Pulley | 1 |
| 27***32 | Hub | 1 |
279-8780 Piston & Rod Gp
| 27***00 | Plug-Shaft End | 1 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 5 |
277-5007 Plug Gp-Engine
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 27***74 | Plate As-Blk | 1 |
274-1929 Pulley Gp-Crankshaft
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 27***29 | Pulley Group-Crankshaft | 1 |
280-1911 Rocker Arm Gp
| 26***25 | Filter-Engine Oil | 1 |
| 28***11 | Rocker Arm Group | 1 |
279-8825 Valve Mechanism Gp
| 27***25 | Valve Mechanism Group | 1 |
| 31***45 | Pump-Oil; (Engine) | 1 |
| 6I***90 | Bolt; (M8x1.25x40-mm) | 4 |
Braking System
278-2279 Brake Ar -Standard
| 25***87 | Kit-Seal; (Steering Cylinder) | 1 |
| 27***79 | Brake Ar; -Standard | 1 |
278-2300 Brake Ar -Optional
| 14***05 | Adapter Group | 1 |
| 14***28 | Connector Assem. | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
273-0249 Control Gp-Parking Brake
| 08***72 | Plug-O-Ring | 2 |
| 11***28 | Screw | 2 |
| 11***79 | Bushing; (External) | 1 |
226-4392 Cylinder Gp-Brake
| 22***92 | Cylinder Group-Brake | 1 |
| 26***45 | Valve & Mtg Group-Control; -Shift | 1 |
| 26***60 | Pump & Mtg Group-Propel | 1 |
274-6944 Lines Gp-Brake
| 20***07 | Lines Group-Steering Cylinder | 1 |
| 26***46 | Pump & Mtg Group-Steering | 1 |
| 26***49 | Filter & Mtg Group-Hydraulic | 1 |
278-2264 Lines Gp-Brake
| 10***03 | Plate-Cover | 1 |
| 12***08 | Hose-Hydraulic; (21.3-Inches) | 0 |
| 13***72 | Cover | 4 |
273-0266 Lines Gp-Brake
| 26***45 | Valve & Mtg Group-Control; -Shift | 1 |
| 26***60 | Pump & Mtg Group-Propel | 1 |
| 26***86 | Motor & Mtg Group-Propel | 1 |
274-6943 Lines Gp-Service Brake
| 10***03 | Plate-Cover | 1 |
| 13***72 | Cover | 4 |
| 14***27 | Hose As | 1 |
Cooling System
283-4558 Cooler Gp-Fltr Base & Eng Oil
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
262-0741 Fan & Motor Gp -Suction
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
288-2360 Housing & Regulator Gp
| 06***86 | Connector | 3 |
| 11***59 | Mounting As | 2 |
| 16***80 | Rivet | 24 |
274-4969 Lines Gp-Water
| 13***89 | Clip; (Ladder) | 4 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***08 | Tank Group-Coolant | 1 |
277-2939 Pump Gp-Water
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 6 |
| 27***57 | Air Cleaner Group | 1 |
286-9045 Radiator & Hyd Oil Cooler Gp
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 2 |
| 19***25 | Grommet | 1 |
262-0753 Radiator & Hyd Oil Cooler Gp
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
332-2712 Radiator Gp
| 23***88 | Gasket-Inlet | 1 |
| 27***02 | Dowel | 2 |
| 27***74 | Elbow As-Air Inlet | 1 |
260-0322 Recovery Gp-Coolant
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
| 19***69 | Hose | 1 |
| 26***22 | Recovery Group-Coolant | 1 |
228-5108 Tank Gp-Coolant
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***38 | Bolt; (M6x20-mm) | 1 |
| 27***28 | Insulator | 1 |
| 27***08 | Cable As | 1 |
289-8646 Alternator Gp-Charging -Non A/C
| 28***46 | Alternator Group-Charging; -Non A/C | 1 |
| 29***88 | Mounting Group-Monitor | 1 |
| 31***62 | Wiring Group-Grade Control, Air Cleaner | 1 |
289-8648 Alternator Gp-Charging -With Air Conditioning
| 28***48 | Alternator Group-Charging; -With Air Conditioning | 1 |
| 31***65 | Mast Group | 1 |
| 31***66 | Wiring Group-Sensor; -Compaction Measurement | 1 |
259-6309 Battery & Wiring Gp
| 13***00 | Clip; (Tab) | 1 |
| 14***15 | Strap As | 1 |
| 25***09 | Battery & Wiring Group | 1 |
275-9293 Converter Gp-Electrical -12-Volt
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
262-0792 Electrical Ar
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
277-4410 Glow Plug Gp
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 4 |
| 27***83 | Switch As-Rocker; (Vibratory Amplitude) | 1 |
310-3251 Grade Control Ar -Accugrade
| 13***89 | Clip; (Ladder) | 2 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 4 |
| 27***83 | Switch As-Rocker; (Vibratory Amplitude) | 1 |
310-3264 Grade Control Ar
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 4 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 20***82 | Cover | 1 |
320-5143 Installation Gp-Communication -Rops
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 27***84 | Switch As-Rocker; (Warning Beacon) | 1 |
311-1889 Installation Gp-Communication -Cab
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 27***84 | Switch As-Rocker; (Warning Beacon) | 1 |
219-6487 Lamp Gp-Flood
| 08***19 | Seal-Rubber | 2 |
| 08***72 | Lever | 1 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
219-6485 Lamp Gp-Flood
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 1 |
| 25***33 | Lamp Group-Warning Beacon; -Amber | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 08***02 | Washer | 1 |
| 08***01 | Screw | 1 |
| 08***44 | Rotary Eccentric Relay | 1 |
259-0133 Lamp Gp-Warning Beacon -Amber
| 10***78 | Bolt; (M10x1.5x55-mm) | 2 |
| 25***33 | Lamp Group-Warning Beacon; -Amber | 1 |
| 29***59 | Starting Motor-Electric | 1 |
287-2542 Lighting Gp-Flood
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 28***42 | Lighting Group-Flood | 1 |
287-2543 Lighting Gp-Flood -Cab
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 28***43 | Lighting Group-Flood; -Cab | 1 |
281-0030 Lighting Gp-Flood -Open Rops
| 28***30 | Lighting Group-Flood; -Open Rops | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
287-2540 Lighting Gp-Warning Beacon
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
287-2541 Lighting Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
287-2539 Lighting Gp-Warning Beacon -Open Rops
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
310-3265 Mast Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***02 | Harness As-Cab | 1 |
081-4135 Regulator Gp-Voltage
| 08***35 | Regulator As | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
292-7884 Starting Motor Gp-Electric
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 13***00 | Clip; (Tab) | 1 |
| 28***06 | Harness As-Switch; (Vibratory, Fixed Frequency) | 1 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
175-2308 Switch Gp-Magnetic
| 11***18 | Clip | 4 |
| 13***00 | Clip; (Tab) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 21***39 | Strap-Cable | 3 |
| 26***41 | Harness As-Engine | 1 |
167-0138 Switch Gp-Magnetic
| 11***18 | Clip | 4 |
| 13***00 | Clip; (Tab) | 2 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
175-2309 Switch Gp-Magnetic
| 03***14 | Screw; (10-32x1-In) | 6 |
| 10***03 | Plate-Cover | 5 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
262-0796 Warning Gp-Backup
| 10***76 | Clamp-Half | 2 |
| 16***42 | Sleeve-Abrasion; (23.6in) | 0 |
| 17***15 | Strap; (Dual Clamp) | 2 |
267-1542 Wiring Gp-Cab -Side Console
| 20***92 | Planetary Group-Final Drive; -Axle | 1 |
| 26***42 | Wiring Group-Cab; -Side Console | 1 |
| 28***73 | Axle Group-Drive; -With Brakes | 1 |
226-8940 Wiring Gp-Cab -Wiper
| 10***76 | Clamp-Half | 2 |
| 13***00 | Clip; (Tab) | 2 |
| 17***20 | Strap-Dual Clamp | 3 |
285-8407 Wiring Gp-Console -Vibratory, Fixed Frequency
| 26***96 | Lines Group-Shift | 1 |
| 27***43 | Lines Group-Service Brake | 1 |
| 28***07 | Wiring Group-Console; -Vibratory, Fixed Frequency | 1 |
279-0493 Wiring Gp-Console -Variable Vibratory
| 06***05 | . Ring; Slide, Washer; (26x63.5x6-mm Thk) | 16 |
| 20***92 | Planetary Group-Final Drive; -Axle | 1 |
| 21***19 | Plate | 2 |
292-8508 Wiring Gp-Engine
| 03***41 | Seal-O-Ring | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 4 |
| 19***55 | Breather; (Transfer Drive) | 1 |
310-3262 Wiring Gp-Grade Control
| 09***41 | Bearing As; (Tapered Roller) | 1 |
| 12***19 | Cone-Bearing | 4 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 4 |
272-2919 Wiring Gp-Machine
| 19***73 | Bushing | 2 |
| 19***94 | Bolt; (M14x2x40-mm) | 12 |
| 19***08 | Pin | 1 |
312-4211 Wiring Gp-Sensor
| 10***04 | Plate As | 1 |
| 11***52 | Seal-O-Ring | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
310-3266 Wiring Gp-Sensor -Compaction Measurement
| 10***04 | Plate As | 1 |
| 11***52 | Seal-O-Ring | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
Engine Arrangement
242-1327 Engine Ar-Primary
| 24***27 | Engine Ar-Primary | 1 |
| 27***29 | Pulley Group-Crankshaft | 1 |
| 27***73 | Filler Group-Engine Oil | 1 |
Frame And Body
262-0972 Bumper Ar
| 15***27 | Handrail | 2 |
| 26***72 | Bumper Ar; -With Blade | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
262-0957 Bumper Ar
| 14***64 | Hitch Group-Articulating & Osc; -Smooth Drum | 1 |
| 14***66 | Plate-End | 1 |
| 26***57 | Bumper Ar | 1 |
275-7701 Bumper Ar -Shell Kit, With Blade
| 14***65 | Cap-Bearing | 4 |
| 14***56 | Bearing-Tapered Roller | 4 |
| 16***94 | Shaft; (Articulation) | 1 |
275-7697 Bumper Ar -With Shell Kit
| 15***27 | Handrail | 1 |
| 20***61 | Handrail As | 1 |
| 27***97 | Bumper Ar; -With Shell Kit | 1 |
262-0970 Bumper Ar -Blade
| 26***70 | Bumper Ar; -Blade | 1 |
| 30***98 | Guard As-Transmission | 1 |
| 30***12 | Shield | 1 |
262-0958 Bumper Ar
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 14***53 | Clamp | 2 |
| 19***11 | Chain | 1 |
266-9164 Bumper Gp-Front
| 09***92 | Locknut; (M6x1-Thd) | 44 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 1 |
| 20***36 | Handle As | 1 |
281-0753 Bumper Gp-Front -Shell Kit, With Blade
| 14***65 | Scraper Group-Smooth Drum; -Flex, Front | 1 |
| 20***27 | Scraper Group-Smooth Drum; -Flex, Rear | 1 |
| 28***53 | Bumper Group-Front; -Shell Kit, With Blade | 1 |
270-8273 Bumper Gp-Front
| 15***70 | Scraper-Steel | 1 |
| 15***71 | Bracket | 3 |
| 15***63 | Bolt; (M20x2.5x54-mm)(M20x2.5x15.9-mm) | 3 |
266-9175 Bumper Gp-Front
| 16***30 | Scraper | 2 |
| 26***75 | Bumper Group-Front | 1 |
| 26***93 | Scraper-Steel | 4 |
281-0742 Bumper Gp-Front
| 15***70 | Scraper-Steel | 1 |
| 15***71 | Bracket | 3 |
| 15***63 | Bolt; (M20x2.5x54-mm)(M20x2.5x15.9-mm) | 3 |
270-8275 Bumper Gp-Front
| 11***34 | Plate-Backing | 2 |
| 11***35 | Scraper; (Flexible) | 1 |
| 11***27 | Plate-Retaining | 1 |
276-2409 Conversion Ar-Front
| 14***15 | Scraper Group-Smooth Drum; -Flex, Front | 1 |
| 21***37 | Scraper Group-Smooth Drum; -Flex | 1 |
| 27***09 | Conversion Ar-Front; -Padded Shell | 1 |
283-5150 Door Gp-Access
| 11***34 | Plate-Backing | 2 |
| 11***35 | Scraper; (Flexible) | 1 |
| 11***27 | Plate-Retaining | 1 |
262-0821 Enclosure Gp-Engine
| 09***92 | Locknut; (M6x1-Thd) | 8 |
| 26***21 | Enclosure Group-Engine | 1 |
| 27***36 | Screen; (Hood Side, Rear, Lh)(Air) | 1 |
268-6499 Frame Gp-Front
| 10***04 | Plate As | 2 |
| 15***75 | Ladder Clip | 3 |
| 16***80 | Rivet | 18 |
259-5542 Frame Gp-Rear
| 25***42 | Frame Group-Rear | 1 |
| 27***18 | Step As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 5 |
306-8900 Guard Gp-Transmission
| 27***44 | Lines Group-Brake | 1 |
| 30***00 | Guard Group-Transmission | 1 |
201-5160 Handrail Gp
| 11***75 | Valve-Needle | 1 |
| 11***68 | Hose As | 1 |
| 11***29 | Hose As | 1 |
159-8726 Handrail Gp
| 15***26 | Handrail Group | 1 |
| 27***49 | Control Group-Parking Brake | 1 |
| 27***64 | Lines Group-Brake | 1 |
329-0417 Handrail Gp
| 03***41 | Seal-O-Ring | 3 |
| 21***13 | Seal-Pin | 3 |
| 22***83 | Cylinder-Brake | 1 |
141-9864 Hitch Gp-Articulating & Osc
| 06***51 | Clamp | 1 |
| 10***49 | Plate | 1 |
| 13***67 | Hose As | 1 |
266-6620 Hood Gp
| 10***49 | Plate | 1 |
| 12***85 | Hose As | 1 |
| 14***25 | Connector As. | 1 |
268-0092 Scraper Gp-Padded Drum -With Shell Kit
| 06***51 | Clamp | 1 |
| 10***49 | Plate | 1 |
| 14***25 | Connector As. | 1 |
146-3165 Scraper Gp-Smooth Drum -Steel
| 10***49 | Plate | 1 |
| 14***65 | Scraper Group-Smooth Drum; -Flex, Front | 1 |
| 14***25 | Connector As. | 1 |
213-5237 Scraper Gp-Smooth Drum -Flex
| 11***46 | Hose As | 2 |
| 21***37 | Scraper Group-Smooth Drum; -Flex | 1 |
201-1727 Scraper Gp-Smooth Drum -Steel
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***06 | Pin As | 2 |
| 12***96 | Hose As | 1 |
213-3151 Scraper Gp-Smooth Drum -Front, Rear Flexible
| 10***05 | Plate | 1 |
| 10***06 | Plate As | 1 |
| 13***72 | Cover | 1 |
213-3150 Scraper Gp-Smooth Drum -Front, Rear Steel
| 21***50 | Scraper Group-Smooth Drum; -Front, Rear Steel | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
146-8415 Scraper Gp-Smooth Drum -Flex
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 4 |
| 10***41 | Cover | 1 |
| 11***78 | Cover | 1 |
289-2979 Screen Gp-Air
| 13***85 | Tee-Special | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 2 |
| 14***13 | Adapter Group | 1 |
309-1647 Shield Gp-Engine Compartment
| 00***63 | Seal-O-Ring; (55.24mm Id) | 1 |
| 10***99 | Screw | 2 |
| 15***58 | Spring | 1 |
342-7072 Shield Gp-Engine Compartment
| 11***73 | Seal-O-Ring | 2 |
| 14***10 | Cover | 1 |
| 14***11 | Cover | 1 |
275-1217 Step Gp
| 10***99 | Screw | 2 |
| 15***59 | Ring; (6.85-mm)(6.85mm Thk) | 1 |
| 15***49 | Ring-Retaining | 1 |
Fuel System
280-1394 Filter Gp-Secondary Fuel
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
| 21***52 | Washer; (Sealing) | 2 |
174-9570 Filter Gp-Water Sep & Fuel
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
321-3600 Injector Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
306-9380 Injector Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
292-3780 Injector Gp-Fuel
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
| 21***52 | Washer; (Sealing) | 2 |
| 23***15 | Clip-Pipe | 10 |
295-2760 Lines Gp-Fuel
| 10***58 | Hose As | 1 |
| 10***03 | Plate-Cover | 2 |
| 11***18 | Clip | 1 |
281-9015 Lines Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
311-0252 Lines Gp-Fuel
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
308-9075 Lines Gp-Fuel
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
351-0973 Pump Gp-Fuel
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
278-5319 Pump Gp-Fuel Injection
| 17***64 | Hinge | 1 |
| 20***00 | Latch As | 1 |
| 21***84 | Angle | 4 |
303-2925 Pump Gp-Fuel Injection
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 17***28 | Adapter | 1 |
276-8398 Pump Gp-Fuel Injection
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
| 27***98 | Pump Group-Fuel Injection | 1 |
317-8021 Pump Gp-Fuel Injection
| 19***42 | Belt Tensioner; (Air Compressor) | 1 |
| 22***47 | Alternator Group-Charging; (24-Volt, 75-Ampere) | 1 |
| 26***41 | Bracket | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 19***43 | Belt Tensioner | 1 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 22***47 | Alternator Group-Charging; (24-Volt, 75-Ampere) | 1 |
275-5165 Tank & Mtg Gp-Fuel -Fast Fill
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 03***17 | Tread-Nonskid | 2 |
| 10***03 | Plate-Cover | 13 |
285-3167 Tank & Mtg Gp-Fuel
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***38 | Film-Information; (12-Volt) | 1 |
310-9321 Tank Gp-Fuel
| 25***09 | Battery & Wiring Group | 1 |
| 26***96 | Warning Group-Backup | 1 |
| 27***19 | Wiring Group-Machine | 1 |
310-9323 Tank Gp-Fuel -Fast Fill
| 31***23 | Tank Group-Fuel; -Fast Fill | 1 |
| 33***09 | Software Group-Communication; (Product Link 300) | 1 |
| 33***10 | Service Group-Product Link; (Product Link 300) | 1 |
Hydraulic System
176-8246 Actuator Gp-Pump -Variable Displacement
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
320-0568 Actuator Gp-Pump -Fixed Displacement
| 08***56 | 90 Degrees Elbow | 1 |
| 12***09 | Elbow | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
177-6949 Actuator Gp-Pump -Propel
| 15***57 | Seal-O-Ring | 1 |
| 17***53 | Rotating Group-Motor; -Hydraulic Oil Cooling Fan | 1 |
| 17***49 | Actuator Group-Pump; -Steering-Pilot Pressure Control | 1 |
332-2713 Cooler Gp-Hydraulic Oil
| 08***56 | 90 Degrees Elbow | 1 |
| 12***09 | Elbow | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
164-6402 Cylinder Gp-Hydraulic -Steering
| 16***02 | Cylinder Group-Hydraulic; -Steering | 1 |
260-0349 Filter & Mtg Gp-Hydraulic
| 08***74 | Nozzle | 2 |
| 11***28 | Screw | 4 |
| 11***30 | Screw; (1-5/16-Thd) | 1 |
319-6499 Head Gp-Pump
| 08***74 | Nozzle | 2 |
| 11***28 | Screw | 4 |
| 11***30 | Screw; (1-5/16-Thd) | 1 |
320-0624 Head Gp-Pump -Fixed Displacement-Variable Displacement
| 11***26 | Pin | 1 |
| 11***27 | Screw-Lock | 1 |
| 11***28 | Screw | 3 |
264-2990 Hydraulic Ar
| 11***26 | Pin | 1 |
| 11***27 | Screw-Lock | 1 |
| 11***28 | Screw | 3 |
264-2991 Hydraulic Ar
| 11***16 | Screw | 14 |
| 13***83 | Pin-Center | 1 |
| 13***84 | Piston | 7 |
308-2687 Hydraulic Ar-Auxiliary
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 7 |
| 14***90 | Plate | 1 |
| 14***94 | Barrel | 1 |
262-0876 Lines Gp-Auxiliary Hydraulic
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
| 11***38 | Piston | 9 |
260-0353 Lines Gp-Auxiliary Hydraulic
| 10***65 | Circlip | 1 |
| 11***51 | Bearing | 1 |
| 19***83 | Seal-Shaft | 1 |
281-2434 Lines Gp-Blade
| 13***74 | Tube As-Drain | 1 |
| 14***46 | Insert-Nylon | 1 |
| 18***73 | Breather As; (Transmission) | 1 |
270-8268 Lines Gp-Blade
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
271-9323 Lines Gp-Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***14 | Switch As-Temperature; (Hydraulic Oil) | 1 |
| 11***18 | Clip | 2 |
260-0351 Lines Gp-Hydraulic Oil Cooler
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***57 | Elbow As. | 1 |
268-8018 Motor Gp-Gear -Hydraulic
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 2 |
| 15***68 | Tee Group | 1 |
123-5259 Motor Gp-Piston -Propel, Drum
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
| 12***34 | Valve Group-Bypass; (Hydraulic Oil Cooler) | 1 |
| 19***64 | Body-Valve | 1 |
172-4843 Motor Gp-Piston
| 10***17 | Seal-O-Ring | 2 |
| 12***91 | Plug | 2 |
| 12***96 | Valve-Piston | 1 |
123-5260 Motor Gp-Piston -Propel, Axle
| 11***16 | Orifice | 1 |
| 12***60 | Motor Group-Propel; -Propel, Axle | 1 |
| 12***98 | Plug | 1 |
270-4408 Pump & Mtg Gp-Piston -Variable Displacement
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
| 11***74 | Lever | 1 |
| 11***77 | Screw | 1 |
270-4407 Pump & Mtg Gp-Piston -Fixed Displacement
| 10***17 | Seal-O-Ring | 2 |
| 10***18 | Seal-O-Ring | 2 |
| 10***04 | Seal-O-Ring | 1 |
279-0480 Pump Gp-Gear
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
| 11***74 | Lever | 1 |
| 11***77 | Screw | 1 |
270-3952 Pump Gp-Piston -Variable Displacement
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 27***52 | Pump Group-Piston; -Variable Displacement | 1 |
| 6E***07 | Locknut-Sealing | 1 |
270-3948 Pump Gp-Piston -Propel, Axle
| 19***53 | Gasket | 1 |
| 19***45 | Bolt-Socket Head; (M6x1x45-mm) | 1 |
| 20***35 | Pin | 2 |
270-3951 Pump Gp-Piston -Fixed Displacement
| 12***34 | Ring-Backup | 1 |
| 17***25 | Pin-Threaded | 1 |
| 17***21 | Nut-Spring | 1 |
270-3947 Pump Gp-Piston -Propel, Drum
| 10***18 | Spring | 2 |
| 12***94 | Plug; (Break Off) | 2 |
| 16***57 | Plug | 1 |
137-4581 Rotating Gp-Motor -Propel
| 13***81 | Rotating Group-Motor; -Propel | 1 |
| 17***15 | Strap; (Dual Clamp) | 2 |
| 17***20 | Strap-Dual Clamp | 2 |
171-6853 Rotating Gp-Motor
| 17***53 | Rotating Group-Motor; -Hydraulic Oil Cooling Fan | 1 |
| 17***15 | Strap; (Dual Clamp) | 2 |
| 17***20 | Strap-Dual Clamp | 2 |
319-6708 Rotating Gp-Pump -Fixed Displacement-Variable Displacement
| 12***87 | Shaft | 1 |
| 12***39 | Seal | 2 |
| 12***40 | Bearing | 2 |
277-6551 Rotating Gp-Pump
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 15***62 | Bracket | 1 |
| 15***51 | Shaft As | 1 |
276-8206 Rotating Gp-Pump -Propel
| 07***70 | Bushing-Terminal | 1 |
| 14***48 | Edge-Cutting | 2 |
| 14***49 | Edge-Cutting | 2 |
260-0575 Tank & Mtg Gp-Hydraulic
| 12***88 | Shaft | 1 |
| 12***39 | Seal | 4 |
| 12***40 | Bearing | 2 |
264-4514 Tank Gp-Hydraulic
| 26***14 | Tank Group-Hydraulic | 1 |
| 27***07 | Pump & Mtg Group-Piston; -Fixed Displacement | 1 |
| 28***07 | Wiring Group-Console; -Vibratory, Fixed Frequency | 1 |
260-0350 Valve & Mtg Gp-Bypass
| 10***67 | Hose As | 1 |
| 13***08 | Clamp As | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
260-0345 Valve & Mtg Gp-Control -Shift
| 10***67 | Hose As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
162-2453 Valve Gp-Bypass -Hydraulic Oil Cooler
| 14***92 | Shaft | 1 |
| 16***64 | Lobe-Weight | 1 |
| 16***53 | Valve Group-Bypass; -Hydraulic Oil Cooler | 1 |
139-7747 Valve Gp-Flushing -Propel Motor
| 03***60 | Cup-Roller Bearing | 1 |
| 07***30 | Seal, Boot | 1 |
| 09***62 | Cone-Bearing | 1 |
194-8505 Valve Gp-Flushing -Vibratory Piston Motor
| 19***05 | Valve Group-Flushing; -Vibratory Piston Motor-Vibratory | 1 |
320-2114 Valve Gp-Pump Control -Variable Displacement
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 11***40 | Grommet | 1 |
320-1483 Valve Gp-Pump Control -Fixed Displacement
| 11***09 | Knob-Control | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***59 | Gasket; (Air Conditioner) | 1 |
177-9810 Valve Gp-Pump Control -Propel, Drum
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 17***10 | Valve Group-Pump Control; -Propel, Drum | 1 |
319-6674 Valve Gp-Pump Control
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
152-1811 Valve Gp-Relief -Pressure Override-Propel Pump
| 14***51 | Rops As | 1 |
| 15***11 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 16***67 | Bracket As | 1 |
126-4494 Valve Gp-Relief -Piston Pump
| 12***94 | Valve Group-Relief; -Vibratory Piston Pump | 1 |
| 14***48 | Duct Group-Cab Air | 1 |
| 22***93 | Wiper & Washer Group-Window; -Front | 1 |
Implements
276-2395 Blade Ar -Padded Drum
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***04 | Plate Assem.; (Lh) | 1 |
Lubrication System
307-1843 Filler Gp-Engine Oil
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 23***61 | Plug; (Blanking) | 1 |
277-1973 Filler Gp-Engine Oil
| 03***70 | Adapter-Pipe | 1 |
| 14***05 | Adapter Group | 1 |
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
277-2912 Filter Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 3 |
| 23***51 | Plate; (Blanking) | 2 |
| 27***00 | Gasket-Housing | 1 |
277-4262 Pump Gp-Engine Oil
| 14***68 | Elbow Group | 1 |
| 14***82 | Elbow As | 1 |
| 15***32 | Elbow As | 1 |
260-0324 Valve Gp-Fluid Sampling -Coolant
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 26***24 | Valve Group-Fluid Sampling; -Coolant | 1 |
277-4694 Valve Gp-Fluid Sampling -Engine Oil
| 27***94 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 27***18 | Hose-Radiator; (Upper) | 1 |
| 28***61 | Grommet | 1 |
Machine Arrangement
262-0813 Chassis Ar
| 25***42 | Frame Group-Rear | 1 |
| 26***75 | Tank & Mtg Group-Hydraulic | 1 |
| 26***13 | Chassis Ar | 1 |
262-0814 Chassis Ar
| 25***42 | Frame Group-Rear | 1 |
| 26***75 | Tank & Mtg Group-Hydraulic | 1 |
| 26***14 | Chassis Ar | 1 |
262-0733 Common Ar
| 24***27 | Engine Ar-Primary | 1 |
| 26***33 | Common Ar | 1 |
| 26***35 | Machine Ar | 1 |
262-0734 Common Ar
| 24***27 | Engine Ar-Primary | 1 |
| 26***34 | Common Ar | 1 |
| 26***35 | Machine Ar | 1 |
262-0735 Machine Ar
| 26***12 | Air Cleaner Group | 1 |
| 26***19 | Mounting Group-Engine Flexible | 1 |
| 26***22 | Recovery Group-Coolant | 1 |
Operator Station
176-3900 Accumulator Gp-Refrigerant -With Desiccant
| 00***58 | Nut; (1/4-20-Thd) | 2 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 07***67 | Race-Thrust Bearing | 2 |
186-6190 Accumulator Gp-Refrigerant -With Desiccant
| 00***58 | Nut; (1/4-20-Thd) | 2 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 07***67 | Race-Thrust Bearing | 2 |
311-8547 Air Conditioner Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 28 |
| 11***59 | Screw-Pan Head; (10-16x0.75-In) | 15 |
| 14***33 | Duct | 1 |
180-9873 Air Conditioner Gp
| 08***19 | Seal-Rubber | 2 |
| 08***72 | Lever | 1 |
| 10***07 | Rivet-Pop | 2 |
287-2544 Air Conditioner Gp -With Control
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
214-7636 Arm Gp-Window Wiper
| 11***56 | Knob-Control | 2 |
| 12***13 | Gasket; (Cab Filter) | 1 |
| 18***86 | Plate Assem. | 1 |
320-9870 Cab Ar
| 1L***66 | Button (Plug) | 2 |
| 31***14 | Floor Mat | 1 |
| 31***42 | Floor Mat | 1 |
320-9883 Cab As
| 14***00 | Insulation | 1 |
| 16***19 | Insulation | 1 |
| 27***09 | Floor Mat-Cab | 1 |
320-9874 Cab Gp
| 15***74 | Bracket | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
| 1G***60 | Clamp | 2 |
183-5106 Compressor Gp-Refrigerant
| 17***22 | Bracket | 1 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 21***87 | Cover | 1 |
262-1635 Compressor Gp-Refrigerant
| 11***09 | Knob-Control | 1 |
| 11***59 | Gasket; (Air Conditioner) | 1 |
| 14***74 | Boot | 1 |
262-0942 Condenser & Mtg Gp-Refrigerant
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
272-9725 Control Gp-Blade
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
| 22***99 | Spacer; (13.5x22x14-mm Thk) | 1 |
| 27***25 | Control Group-Blade | 1 |
310-4090 Control Gp-Direction & Speed
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
282-9925 Control Gp-Direction & Speed -Automatic Vibratory
| 11***53 | Bracket Assem. | 1 |
| 11***54 | Cover | 1 |
| 11***18 | Clip | 1 |
282-9924 Control Gp-Direction & Speed
| 12***27 | Grommet | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
| 24***50 | Guard | 1 |
186-3380 Control Gp-Handle -Propel Lever
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
197-8545 Control Gp-Propel
| 03***68 | Elbow | 1 |
| 10***05 | Plate | 8 |
| 12***53 | Spacer-Special; (Split) | 1 |
216-9513 Control Gp-Propel
| 12***92 | Rod End | 1 |
| 12***80 | Nut-Special; (M8 X 1.25 Thd)L.Hand | 1 |
| 21***13 | Control Group-Propel | 1 |
197-3300 Control Gp-Propel
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
307-9804 Cylinder & Mtg Gp-Tilt
| 09***24 | Ring-Retaining | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 11***53 | Screw; (M6x1x16-mm) | 2 |
223-4276 Door Gp-Cab -Sliding Window, Lh
| 08***35 | Regulator As | 1 |
| 08***37 | Nut | 1 |
| 09***24 | Ring-Retaining | 1 |
143-5948 Duct Gp-Cab Air
| 11***56 | Plate | 2 |
| 14***48 | Duct Group-Cab Air | 1 |
| 23***46 | Nut-Jam; (3/8-16-Thd) | 2 |
240-4607 Filter Gp-Cab Air
| 13***82 | Arm-Mirror | 2 |
| 13***83 | Mirror-Convex | 2 |
| 23***70 | Plate | 2 |
179-4690 Floor Mat Gp -Open Platform
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 17***90 | Floor Mat Group; -Open Platform | 1 |
| 20***23 | Cap; (Wiper) | 1 |
288-4036 Floor Mat Gp-Cab
| 05***74 | Pin | 4 |
| 15***42 | Washer; (70.75x143x10-mm Thk) | 2 |
| 24***46 | Mount | 8 |
155-5234 Gauge Gp-Fuel Level
| 09***11 | Tube | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
292-5930 Gauge Gp-Vibratory
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 29***30 | Gauge Group-Vibratory | 1 |
| 31***85 | Plate | 1 |
210-5550 Guard Gp-Vandalism
| 21***50 | Guard Group-Vandalism | 1 |
| 23***71 | Mirror Group-Rear View; -Exterior | 1 |
| 24***07 | Filter Group-Cab Air | 1 |
240-4672 Heater & Mtg Gp-Cab
| 23***71 | Mirror Group-Rear View; -Exterior | 1 |
| 24***07 | Filter Group-Cab Air | 1 |
| 24***72 | Heater & Mtg Group-Cab | 2 |
180-9874 Heater Gp-Cab
| 18***74 | Heater Group-Cab | 1 |
| 20***60 | Handrail Group | 1 |
| 21***50 | Guard Group-Vandalism | 1 |
287-2571 Horn Gp-Electric -Rops
| 15***26 | Handrail Group | 1 |
| 17***17 | Rops Group | 1 |
| 17***90 | Floor Mat Group; -Open Platform | 1 |
287-2572 Horn Gp-Electric -Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***16 | Plug | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
273-0345 Installation Gp-Radio
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 4 |
320-9871 Liner Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***90 | Fuse; (10 Amp) | 4 |
| 11***91 | Fuse; (15-Ampere) | 2 |
262-0920 Lines Gp-Air Conditioner
| 05***74 | Pin | 4 |
| 15***41 | Mount As | 4 |
| 15***04 | Mount | 1 |
262-1633 Lines Gp-Cab Heater
| 11***75 | Film-Instruction; (Unlock, Release) | 1 |
| 18***85 | Film-Information; (Alternate Exit) | 1 |
| 22***76 | Door Group-Cab; -With Sliding Window | 1 |
292-5040 Linkage Gp
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 11***73 | Hook-Retainer | 2 |
| 29***40 | Linkage Group; -Servo | 1 |
328-2039 Meter Gp-Vibratory -Recording Module, Fixed Freq
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***91 | Plate | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
288-4737 Meter Gp-Vibratory
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***51 | Seat Group-Suspension; -Vinyl | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
317-8774 Meter Gp-Vibratory
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
| 24***37 | Seat Group-Suspension; -Vinyl | 1 |
328-2040 Meter Gp-Vibratory -Recording Module
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
237-8071 Mirror Gp-Rear View -Exterior
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
107-4643 Mirror Gp-Rear View -Interior
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***91 | Plate | 1 |
239-4009 Motor Gp-Window Wiper
| 15***77 | Reservoir | 1 |
| 23***09 | Motor Group-Window Wiper; -Rear | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
330-5044 Motor Gp-Window Wiper
| 33***44 | Motor Group-Window Wiper | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
155-5783 Motor Gp-Window Wiper -Front
| 09***24 | Ring-Retaining | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***93 | Grommet | 1 |
259-1188 Mounting Gp-Cab
| 09***57 | Screw-Machine; (M5x0.8x5.2-mm) | 6 |
| 13***70 | Seal; (326-cm) | 0 |
| 15***15 | Gasket | 1 |
292-8588 Mounting Gp-Monitor
| 13***70 | Seal; (326-cm) | 0 |
| 14***69 | Stop | 1 |
| 15***15 | Gasket | 1 |
310-3254 Mounting Gp-Radio
| 11***69 | Arm As-Window Wiper; (Rear) | 1 |
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
286-7088 Operator Ar
| 28***88 | Operator Ar, Air Intake Manifold | 1 |
| 30***02 | Film-Warning; (Falling Hazard, Read Omm) | 3 |
271-9220 Operator Ar -Open
| 27***20 | Operator Ar; -Open | 1 |
| 30***03 | Film-Warning; (Falling Hazard, Read Omm) | 3 |
267-2168 Operator Ar -Non A/C
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***44 | Film-Warning; -Universal | 1 |
| 22***46 | Film-Warning; (No Ether Spray/Air Intk, Intl) | 1 |
271-9246 Operator Ar -Open Rops
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***27 | Film-Warning; (Universal) | 1 |
262-0918 Operator Ar -Cab With Air Conditioner
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 26***18 | Operator Ar; -Cab With Air Conditioner | 1 |
| 29***33 | Film-Identification; (Caterpillar) | 1 |
272-7252 Panel Gp-Instrument -Center Console
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
278-0653 Panel Gp-Instrument -Side Console
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
281-4179 Platform Gp-Operator
| 28***79 | Platform Group-Operator | 1 |
281-4176 Platform Gp-Operator
| 28***76 | Platform Group-Operator | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
179-0717 Rops Gp
| 17***17 | Rops Group | 1 |
320-9873 Rops Gp-Enclosed
| 32***73 | Rops Group-Enclosed | 1 |
204-4390 Screen Gp-Sun -Cab
| 20***90 | Screen Group-Sun; -Cab | 1 |
262-1331 Seat & Mounting Gp -Cloth
| 26***31 | Seat & Mounting Group; -Cloth | 1 |
262-1330 Seat & Mounting Gp -Vinyl
| 26***30 | Seat & Mounting Group; -Vinyl | 1 |
235-0512 Seat & Mounting Gp -Vinyl
| 23***12 | Seat & Mounting Group; -Vinyl | 1 |
249-3237 Seat Gp-Suspension -Vinyl
| 24***37 | Seat Group-Suspension; -Vinyl | 1 |
248-1362 Seat Gp-Suspension -Cloth
| 24***62 | Seat Group-Suspension; -Cloth | 1 |
271-3171 Seat Gp-Suspension -Cloth
| 27***71 | Seat Group-Suspension; -Cloth | 1 |
235-4119 Seat Gp-Suspension -Cloth
| 23***19 | Seat Group-Suspension; -Cloth | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 23***51 | Seat Group-Suspension; -Vinyl | 1 |
262-1010 Speedometer Gp
| 26***10 | Speedometer Group | 1 |
155-4774 Tank Gp-Window Washer
| 15***74 | Tank Group-Window Washer | 1 |
107-4641 Visor Gp-Cab
| 10***41 | Visor Group-Cab | 1 |
288-8880 Window Gp-Cab
| 28***80 | Window Group-Cab; -Rh | 1 |
180-3871 Window Gp-Door -Sliding
| 18***71 | Window Group-Door; -Sliding | 1 |
223-4793 Wiper & Washer Gp-Window
| 22***93 | Wiper & Washer Group-Window; -Front | 1 |
Power Train
286-0402 Axle & Mtg Gp-Drive -With Brakes
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
| 12***58 | Spacer; (2-mm Thk) | 2 |
| 12***59 | Spacer; (3-mm Thk) | 2 |
286-0403 Axle & Mtg Gp-Drive
| 17***44 | Spacer; (1.6-mm Thk) | 2 |
| 17***48 | Spacer; (2.0mm Thk) | 2 |
| 17***50 | Spacer; (3.0mm Thk) | 2 |
268-5703 Axle Ar-Drive
| 20***33 | Drum Group-Smooth | 1 |
| 26***03 | Axle Rear Axle Drive | 1 |
| 28***40 | Drive Group-Drum | 1 |
268-5704 Axle Ar-Drive
| 22***71 | Drum Group-Padded | 1 |
| 26***04 | Axle Rear Axle Drive | 1 |
| 28***41 | Drive Group-Drum | 1 |
286-0873 Axle Gp-Drive -With Brakes
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 15***62 | Bracket | 1 |
| 15***51 | Shaft As | 1 |
286-0874 Axle Gp-Drive
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 14***70 | Plate-Drum Drive | 1 |
| 15***62 | Bracket | 1 |
226-4394 Differential Gp -Right Axle Housing
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 14***21 | Shaft | 1 |
| 14***79 | Drum As-Smooth | 1 |
226-4393 Differential Gp
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 14***21 | Shaft | 1 |
| 16***62 | Housing Group-Eccentric Weight | 1 |
287-3240 Drive Gp-Drum
| 06***07 | . Shaft, Sealant; (Gasket) | 0 |
| 09***28 | Bearing As; (Tapered Roller) | 1 |
| 09***24 | Ring-Retaining | 1 |
287-3241 Drive Gp-Drum
| 10***56 | Hose As | 1 |
| 13***08 | Clamp As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
276-2413 Drum Ar-Padded
| 10***56 | Hose As | 1 |
| 13***08 | Clamp As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
313-6888 Drum Ar-Smooth
| 10***03 | Plate-Cover | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
| 15***79 | Clamp-Half | 4 |
287-3611 Drum Gp-Drive & Vibratory
| 17***48 | Wheel & Tire Group | 2 |
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 28***11 | Drum Group-Drive & Vibratory | 1 |
287-3606 Drum Gp-Drive & Vibratory
| 12***60 | Motor Group-Propel; -Propel, Axle | 1 |
| 14***25 | Connector As. | 1 |
| 14***81 | Elbow Group | 1 |
314-5244 Drum Gp-Drive & Vibratory
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 24***53 | Wheel & Tire Group | 2 |
| 31***44 | Drum Group-Drive & Vibratory | 1 |
290-8651 Drum Gp-Drive & Vibratory
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 23***90 | Wheel & Tire Group | 2 |
| 29***51 | Drum Group-Drive & Vibratory | 1 |
228-4171 Drum Gp-Padded
| 10***79 | Nut; (M22x1.5-mm Thd) | 24 |
| 22***71 | Drum Group-Padded | 1 |
| 26***34 | Wheel & Tire Group; -Lh | 1 |
208-3933 Drum Gp-Smooth
| 09***92 | Pin-Spring | 2 |
| 09***19 | Ring-Retaining | 4 |
| 15***16 | Plug-Drain; (Final Drive Planetary) | 1 |
216-1609 Flange Gp-Wheel
| 19***53 | Ring-Retaining | 3 |
| 19***69 | Plug; (Thrust) | 1 |
| 19***60 | Bearing | 3 |
226-4390 Housing Gp-Axle -With Brakes
| 09***58 | Ring-Retaining | 3 |
| 10***19 | Ring-Retaining | 1 |
| 13***64 | Disc-Friction | 5 |
316-1172 Installation Gp-Drum
| 28***03 | Axle & Mtg Group-Drive | 1 |
| 28***11 | Drum Group-Drive & Vibratory | 1 |
| 31***72 | Installation Group-Drum | 2 |
231-0689 Kit-Differential
| 23***89 | Kit-Differential; (Kit) | 1 |
| 28***06 | Drum Group-Drive & Vibratory | 1 |
| 31***72 | Installation Group-Drum | 1 |
310-6627 Lines Gp-Propel
| 16***34 | Pad-Drum | 60 |
| 29***09 | Shell As; (Padded Drum) | 2 |
| 31***27 | Lines Group-Propel | 1 |
272-4962 Lines Gp-Propel
| 08***56 | 90 Degrees Elbow | 1 |
| 13***41 | Adapter-90 Degree | 1 |
| 14***32 | Plate-Adapter | 1 |
268-5696 Lines Gp-Shift
| 17***15 | Strap; (Dual Clamp) | 2 |
| 17***20 | Strap-Dual Clamp | 2 |
| 20***92 | Shell Group-Padded | 1 |
263-5386 Motor & Mtg Gp-Propel
| 09***94 | Seal-O-Ring | 2 |
| 11***19 | Spring | 1 |
| 13***81 | Valve-Relief; (Inlet) | 1 |
247-5651 Mounting Gp-Wheel
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
268-4033 Mounting Gp-Wheel
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
229-6664 Mounting Gp-Wheel
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 22***64 | Mounting Group-Wheel | 1 |
| 26***41 | Wheel & Tire Group; -Rh | 1 |
263-6349 Planetary Gp-Final Drive -Drum
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
203-4692 Planetary Gp-Final Drive -Axle
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
336-0281 Planetary Gp-Final Drive
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
229-5051 Planetary Gp-Final Drive -Axle
| 22***51 | Planetary Group-Final Drive; -Axle | 1 |
| 22***90 | Rim Group | 1 |
| 6C***68 | Tire; (20.5-25) | 1 |
287-3651 Power Train Ar
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
287-3612 Power Train Ar
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
262-2960 Pump & Mtg Gp-Propel
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
206-7492 Shell Gp-Padded
| 20***92 | Shell Group-Padded | 1 |
| 26***53 | Lines Group-Auxiliary Hydraulic | 1 |
| 26***63 | Plate & Film Group | 1 |
276-2391 Shell Gp-Padded -With Blade
| 26***53 | Lines Group-Auxiliary Hydraulic | 1 |
| 26***64 | Plate & Film Group | 1 |
| 27***73 | Bumper Group-Front | 1 |
211-1656 Valve Gp-Control -Blade
| 21***56 | Valve Group-Control; -Blade | 1 |
| 26***76 | Lines Group-Auxiliary Hydraulic | 1 |
| 26***63 | Plate & Film Group | 1 |
276-2609 Valve Gp-Shift Pressure
| 26***76 | Lines Group-Auxiliary Hydraulic | 1 |
| 26***64 | Plate & Film Group | 1 |
| 27***68 | Lines Group-Blade | 1 |
175-0050 Wheel & Mtg Gp-Drive
| 17***50 | Wheel & Mtg Group-Drive | 1 |
| 20***92 | Shell Group-Padded | 1 |
| 26***53 | Lines Group-Auxiliary Hydraulic | 1 |
268-4040 Wheel & Mtg Gp-Drive
| 20***92 | Shell Group-Padded | 1 |
| 26***76 | Lines Group-Auxiliary Hydraulic | 1 |
| 26***63 | Plate & Film Group | 1 |
229-5404 Wheel & Tire Gp -Lh
| 22***04 | Wheel & Tire Group; -Lh | 1 |
| 28***24 | Bumper As | 1 |
| 28***15 | Spacer | 4 |
268-4041 Wheel & Tire Gp -Rh
| 09***92 | Locknut; (M6x1-Thd) | 3 |
| 20***00 | Latch As | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
229-5406 Wheel & Tire Gp -Rh
| 16***77 | Shim; (1.5-mm Thk)(1.5mm Thk) | 3 |
| 21***63 | Nut; (M20x2.5-Thd)(Square) | 36 |
| 21***74 | Scraper | 18 |
175-0048 Wheel & Tire Gp
| 17***48 | Wheel & Tire Group | 1 |
| 26***43 | Bumper As | 1 |
| 28***15 | Spacer | 4 |
247-5653 Wheel & Tire Gp
| 24***53 | Wheel & Tire Group | 1 |
| 28***15 | Spacer | 4 |
| 28***54 | Bumper As | 1 |
230-9790 Wheel & Tire Gp
| 16***77 | Shim; (1.5-mm Thk)(1.5mm Thk) | 3 |
| 21***63 | Nut; (M20x2.5-Thd)(Square) | 36 |
| 21***74 | Scraper | 18 |
268-4035 Wheel & Tire Gp -Rh
| 20***92 | Shell Group-Padded | 1 |
| 26***92 | Scraper Group-Padded Drum; -With Shell Kit | 1 |
| 26***35 | Wheel & Tire Group; -Rh | 1 |
268-4044 Wheel & Tire Gp -Lh
| 08***68 | Washer; (13x27.5x2.5-mm Thk) | 1 |
| 11***63 | Striker As | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 9 |
268-4034 Wheel & Tire Gp -Lh
| 26***34 | Wheel & Tire Group; -Lh | 1 |
| 28***15 | Spacer | 4 |
| 28***71 | Bumper As | 1 |
Service Equipment And Supplies
292-4510 Film Gp
| 29***10 | Film Group | 1 |
260-0597 Film Gp-International
| 26***97 | Film Group-International | 1 |
310-3258 Film Gp-International
| 31***58 | Plate, Film Group-International, . Plate; Valve, Plate; (Sub For 30***26 Or 31***22) | 1 |
260-0595 Film Gp-U.S.
| 26***95 | Film Group-U.S. | 1 |
310-3257 Film Gp-U.S.
| 31***57 | Film Group-U.S. | 1 |
262-0963 Plate & Film Gp
| 26***63 | Plate & Film Group | 1 |
280-6703 Plate & Film Gp
| 28***03 | Plate & Film Group | 1 |
262-0964 Plate & Film Gp
| 26***64 | Plate & Film Group | 1 |
280-6702 Plate & Film Gp
| 28***02 | Plate & Film Group | 1 |
Steering System
262-0879 Control Gp-Steering
| 10***05 | Plate | 7 |
| 10***06 | Plate As | 1 |
| 13***46 | Hose Assem. | 2 |
274-7253 Cylinder & Mtg Gp-Steering
| 10***05 | Plate | 10 |
| 10***06 | Plate As | 1 |
| 15***83 | Clamp-Half | 28 |
153-7369 Knob Gp-Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***65 | Tee As-Swivel | 1 |
| 15***69 | Knob Group-Steering | 1 |
260-0849 Lines Gp-Steering
| 19***06 | Bolt-Stacking; (M6x1x64-mm) | 4 |
| 22***85 | Hose As | 1 |
| 26***49 | Lines Group-Steering | 1 |
205-7407 Lines Gp-Steering Cylinder
| 11***21 | Seal-Shaft | 1 |
| 20***07 | Lines Group-Steering Cylinder | 1 |
| 23***97 | Kit-Seal; (Hydraulic Fan Motor) | 1 |
260-0346 Pump & Mtg Gp-Steering
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
Vibratory System
287-3610 Drive Gp-Support & Vibratory
| 28***10 | Drive Group-Support & Vibratory | 1 |
| 29***89 | Condenser As-Refrigerant | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
208-3934 Housing Gp-Eccentric Weight
| 14***15 | Connector As | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***90 | Elbow Group | 1 |
161-1162 Housing Gp-Eccentric Weight
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***62 | Housing Group-Eccentric Weight | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 12 |
270-4390 Hydraulic Ar-Vibratory -Variable Displacement
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***75 | Plate | 1 |
| 14***04 | Bracket | 1 |
270-4389 Hydraulic Ar-Vibratory -Fixed Displacement
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***75 | Plate | 1 |
| 14***04 | Bracket | 1 |
268-5699 Lines Gp-Vibratory
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***75 | Plate | 1 |
| 14***04 | Bracket | 1 |
268-5700 Lines Gp-Vibratory
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***75 | Plate | 1 |
| 14***04 | Bracket | 1 |
161-1163 Shaft Gp-Eccentric Weight
| 08***72 | Seal-O-Ring | 1 |
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***21 | Cap | 1 |
299-2443 Support Gp-Vibratory
| 00***58 | Nut; (1/4-20-Thd) | 2 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 07***67 | Race-Thrust Bearing | 2 |
Work Tools
287-6903 Blade Gp-Compactor
| 13***00 | Clip; (Tab) | 4 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 28***03 | Blade Group-Compactor | 1 |
276-2396 Blade Gp-Compactor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 27***96 | Blade Group-Compactor | 1 |
CS-74 serial number reference
On CS-74 compactors, the PIN/serial plate is a riveted metal tag; on the B-Series frame it is located at the rear of the machine on the left side, and placement is similar on the first-generation frame, but check the machine's own Operation and Maintenance Manual for the exact spot since it can shift slightly between generations. The plate shows the full 17-character PIN. The first three characters of the trailing serial/model-descriptor block are the prefix (for example C8S, C8F), which ties to a specific model and engine build combination; the remaining digits are the unit sequence number.
| Prefix | Identifies | Notes |
|---|---|---|
| C8S | CS-74 first-generation (pre-B-Series) smooth-drum vibratory soil compactor | Listed directly under the CS-74 model on the cover of the factory Operation and Maintenance Manual covering CS56/CS64/CS74/CS76 and CP56/CP64/CP74/CP76 compactors (S/N C8S1-Up = CS74). This is the first-generation machine, powered by the C6.6 engine. Exact cutover point versus the C8F block within the same generation is not documented in that manual - confirm with dealer. |
| C8F | CS-74 first-generation (pre-B-Series) smooth-drum vibratory soil compactor | Also listed directly under the CS-74 model on the same factory manual cover (S/N C8F1-Up = CS74), first-generation, C6.6-powered. The padfoot-drum CP-74 sibling on the shared chassis uses its own separate prefix (P8F) in the same document, not this one, so this block should not be used for CP-74 parts lookups. |
Frequently asked questions
What engine does the Caterpillar CS74 use?
A Cat C6.6 electronic diesel with ACERT technology, rated at 116 kW (158 hp) gross power and about 108 kW (147 hp) net. This is the C6.6 baseline for the 2008-2014 CS74; the later CS74B successor switched to a Tier 4 Final C4.4 or C7.1 engine depending on market.
What is the operating weight of the Caterpillar CS74?
Roughly 15.1 to 17.1 tonnes (about 33,300 to 37,700 lb), depending on configuration. An open-platform smooth-drum machine runs near the low end; a cab-equipped unit fitted with a leveling blade and padfoot shell kit runs near the high end. Always check the specific configuration, since weight varies by cab, canopy, blade, and shell kit.
What replaced the Caterpillar CS74?
The Cat CS74B. It carried the same smooth-drum vibratory soil compactor role forward but moved to Tier 4 Final emissions compliance, offered with either a Cat C4.4 or C7.1 engine depending on market and source. Verify the exact engine and weight for a given serial range with your dealer.
What CS-74 owners discuss
Is the Cat CS-74 an asphalt paving roller or a soil compactor?
The CS-74 is a single smooth-drum vibratory soil compactor built for granular soil and subgrade work, not a tandem asphalt/paving roller. It gets filed under "paving compactor" in used-equipment listings because contractors run it on road and subgrade prep ahead of paving crews, but the drum and vibratory tuning are set up for soil, not hot mix. Confirm the intended job before comparing it to a tandem asphalt roller — the two machine types aren't interchangeable.
Does the CS-74's engine change across the model's lifespan?
Yes, by series. The original CS-74 (built roughly 2008 to 2014) is documented with a Cat C6.6 diesel rated around 116 kW (156 hp) gross. The Tier 4 Final update, the CS-74B, moved to a Cat C4.4 ACERT rated about 129.5 kW (173.7 hp) gross. Treat the exact rating as varying by serial range and regional emissions spec — pull the engine serial tag rather than assuming based on model year.
What DPF/regen behavior do owners of the ACERT-engined CS-74B report?
The usual Tier 4 soot-and-regen pattern shows up: heavy idle time on compaction jobs (waiting on a paver, standing on subgrade) loads the DPF faster than steady travel would. Expect a dash regen prompt followed by a parked or manual regen cycle. Running the machine under load periodically keeps exhaust temperature high enough for passive regen and cuts down on forced regens. Low-ash engine oil and ultra-low-sulfur diesel are non-negotiable for the aftertreatment system to behave. Have your dealer verify the regen procedure and pull any active codes for your serial range before assuming a sensor has failed.
What's the known long-term wear point on the CS-74's vibratory system?
The pod-style exciter is the wear item owners point to. Bearing seals sit inside the drum, so when a seal fails, oil dumps into the drum interior instead of leaking where it would be visible from outside — the first sign is often weakening compaction force or a bearing letting go outright, and a failure on the non-driven side can take the exciter shaft with it. The preventive step is not skipping the vibratory-system oil change, which Cat schedules at roughly every 3 years or 3,000 hours; machines with skipped or unknown service history are the ones that turn up with exciter damage. Have your dealer verify vibratory-system oil condition and bearing play before running the machine hard.
Vibration cuts out when the machine slows down — is that a fault?
No, that's designed behavior. The CS-74 runs a dual-pump propel system, one pump dedicated to the drum drive motor and one to the rear axle motor, and vibration is set to disengage automatically once travel speed drops below a set threshold, then resume once speed picks back up. Don't chase a hydraulic fault because vibration stops on a slow crawl or a tight turn. If vibration or propel drops out at normal working speed, the usual diagnostic order is fuses, relays, and harness connectors first, then pump and motor — electrical faults get reported more often than an actual pump or motor failure. Have your dealer verify hydraulic flow and pressure before condemning a pump.
What electrical or sensor issues come up most on this machine?
Seat and neutral-start safety switches are the component flagged most often: a worn seat suspension or a sticking switch causes intermittent no-vibrate or no-start faults that look like a bigger problem than they are. Exposed harness connectors and blown fuses near the vibration relay are the next most common cause, ahead of anything hydraulic. These are safety interlocks, so treat any bypass as temporary at best — have your dealer verify the seat and neutral-switch circuit and interlock logic rather than wiring around it.
What should I check when buying a used CS-74?
Confirm which engine platform it carries — C6.6 or C4.4 ACERT — from the serial number, since that drives emissions compliance and parts sourcing. Ask for vibratory-system oil change records at the roughly 3-year/3,000-hour interval. Spin the drum and check both ends for any sign of oil weep, since a failed internal seal won't always show externally. Inspect the rubber isolator mounts between frame and drum for cracking or hardening. Run the vibration system through low and high amplitude at working speed and confirm the automatic low-speed cutoff and resume behaves correctly. Pull any stored fault codes, especially around the aftertreatment/DPF system on a B-series machine. Have your dealer verify exciter bearing condition and any active codes before committing to a price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CS-74 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.