Caterpillarpaving compactorvibratory compactor
Caterpillar CS-573C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CS-573C is a single-drum vibratory soil/paving compactor built on Caterpillar's C-series compactor platform of the mid-to-late 1990s, powered by a Cat 3116 turbocharged diesel inline-six shared across the related CS-531C, CS-533C, CS-563C, and CS-583C machines of the same generation. Operating weight runs roughly 13.2-13.6 t (29,000-30,000 lb) depending on cab, ROPS, and ballast configuration. It came as a smooth steel drum roller (CS-573C) or a padfoot drum roller (CP-573C), with shell-kit conversion available between the two, and with or without an enclosed ROPS/FOPS operator cab. The C-series line followed the original CS-573 of the early-to-mid 1990s and was itself succeeded by the CS-573D and later the CS-573E.
Across the 573 lineage, Caterpillar moved from the mechanically governed 3116 diesel and simple hydraulic controls of the C-series to electronically managed engines, extended-life coolant, and refrigerant-based cab climate control on the D and E series that followed. That shift added emissions controls and onboard diagnostics but also more electronics to fail. The CS-573C's mechanical fuel system, straightforward hydraulics, and lack of aftertreatment make it a machine contractors and rebuilders still favor today: parts commonality across the 531/533/563/573/583 family keeps used components affordable, and the design is simple enough for an independent shop to rebuild without dealer-only diagnostic tools. That keeps well-maintained or rebuilt CS-573C units circulating in the used compaction equipment and parts market well after Caterpillar stopped building them.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CS-573C specifications
Engine
| Engine model | Cat 3116T, turbocharged direct-injection diesel, 6 cylinders |
| Gross power | 108 kW (145 hp) |
| Net power | Not published for this configuration — verify with your dealer |
| Displacement | 6.6 L (402.8 cu in) |
| Emissions tier | Not documented for this model — predates modern off-road emissions tiers, verify with your dealer |
Weights
| Operating weight | 13,300 kg (29,322 lb) |
| Shipping weight | Not published |
| Ground pressure | Not published |
Dimensions
| Overall length | 5.40 m (17 ft 9 in) |
| Overall width | 2.51 m (8 ft 3 in) |
| Height to top of cab | 3.07 m (10 ft 1 in) |
| Wheelbase | 2.74 m (9 ft 0 in) |
| Ground clearance | 483 mm (19.0 in) |
| Drum width | 2.13 m (83.9 in) |
| Drum diameter | 1.52 m (59.9 in) |
| Tire size | 23.1x26, 8-ply |
Performance
| Maximum travel speed | 12.9 km/h (8 mph) |
| Vibration frequency | 30 Hz |
| Centrifugal force, high amplitude | 141.2 kN (31,750 lbf) |
| Centrifugal force, low amplitude | 74.2 kN (16,675 lbf) |
| Gradeability | Not published |
Service capacities (summary)
| Fuel tank | 220 L (58.2 gal) |
| Hydraulic system | 110 L (29.1 gal) |
| Engine oil | 20 L (5.3 gal) |
| Cooling system | Not published |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CS-573C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter | 20 L (5.3 US gal) | Cat DEO (Diesel Engine Oil) SAE 15W-40, API CH-4/CI-4 duty cycle. Cat DEO-ULS accepted on later reissues. Drop to SAE 10W-30 in cold-climate starts; use an engine oil pan heater or block heater below freezing per Cat cold-weather guidance. |
| Cooling system | approx. 33 L (8.7 US gal), varies by configuration/series | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), premixed 50/50 with water for a -37 C (-34 F) protection level. Not documented for CS-573C individually — verify exact fill against the machine's own OMM or a dealer; figure shown is the shared C-series compactor platform value. |
| Fuel tank | 220 L (58.1 US gal) | No. 2-D diesel fuel per ASTM D975. Switch to No. 1-D diesel in cold weather to keep pour point below ambient temperature. |
| Power train / transmission (transaxle) | approx. 27 L (7.1 US gal), varies by configuration/series | Cat TDTO (Transmission/Drive Train Oil), SAE 10W below 0 C (32 F) and SAE 30 above. Not confirmed for CS-573C specifically — shared C-series compactor platform figure, verify with dealer. |
| Final drive, each (drum drive) | approx. 3.2 L (0.85 US gal) per side, varies by configuration/series | Cat TDTO or Cat GO (Gear Oil) 80W-90, GL-5. Not confirmed for CS-573C specifically — shared C-series compactor platform figure, verify with dealer. |
| Vibratory drum drive / eccentric weight housing | approx. 55 L (14.5 US gal), varies by configuration/series — unverified for this exact model | Cat GO (Gear Oil) 80W-90, GL-5, or Cat TDTO depending on housing design. Figure carried over from the shared C-series compactor platform; confirm against the CS-573C OMM before filling. |
| Hydraulic system and tank | 110 L (29.1 US gal) | Cat HYDO Advanced 10 (Cat TDTO was the factory-era hydraulic fluid spec on this generation of compactor). Select viscosity grade by ambient temperature band per the Cat fluid viscosity chart; use a arctic-grade hydraulic oil in sustained sub-zero climates. |
| Grease points | spec only, no fill volume | Cat Multipurpose Grease (MPGM), NLGI 2, lithium-complex base, for chassis and articulation pivots. Cat Extreme Application (XA) grease where the OMM calls out high-load or high-heat vibratory bearing points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CS-573C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the CS-573C beyond the schedule
Predictive Maintenance and Fluid Analysis
Sample engine oil, hydraulic oil, and vibratory support (eccentric weight bearing) oil at every scheduled service and track wear metals as the Cat 3116 and drum drive age. Trend drum and axle final drive oil samples separately from engine oil - contamination on one system rarely signals contamination on the other on this platform. Watch coolant condition closely since the 3116 runs a conventional cooling system prone to scale without additive testing. Flag rising eccentric bearing temperature or vibration early; catching it early is far cheaper than a housing rebuild.
Corrective and Common Repairs
Expect drum scraper and isolation mount wear from constant vibratory loading, plus articulation joint and steering cylinder pin wear on the CS-573C's oscillating frame. The 3116's mechanical injection pump and valve train need periodic lash and timing checks rather than electronic recalibration. Turbocharger shaft play shows up as blue smoke under load, a common complaint on high-hour 3116 units. Check the eccentric weight bearing seals and vibratory isolation mounts for oil seepage - the most frequent leak path on this compactor.
Overhaul and Rebuild Points
Major rebuild targets center on the eccentric weight housing bearings and drum drive motor, which carry the heaviest cyclic load on the CS-573C. Plan a 3116 in-frame overhaul around the injection pump, turbocharger, and cylinder liner and ring wear once oil consumption climbs. Final drive planetary sets on both the rear axle and the drum are common rebuild candidates on machines pulled from long subgrade or soil work. Inspect the articulation hitch and drawbar pins for elongation before wear forces a frame-level repair.
Seasonal and Environment Servicing
Cold-start reliability on the mechanical 3116 depends on glow plug or ether-aid condition and correct-viscosity engine oil - check both before winter layup. Drain fuel tank water and sediment more often in humid or wet-season work since the 3116's mechanical injection system is sensitive to water contamination. In hot, dusty compaction work, service the primary air filter element ahead of the standard interval and check the radiator core for packed dust that cuts cooling capacity. Wash accumulated soil off drum scrapers and isolation mounts each shift in wet ground conditions.
CS-573C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 139-3531 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CS-573C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Coolant Temperature (red warning lamp) | Engine coolant temperature has risen above the safe operating range shown on the dash gauge. | Low coolant level, blocked radiator fins, slipping or failed fan belt, thermostat stuck closed, or overload of the mechanically governed 3116 diesel. | Idle down, let the engine cool, check coolant level and radiator/fan belt condition before restarting; do not open a hot cooling system. |
| Engine Oil Pressure (red warning lamp) | Oil pressure has dropped below the switch threshold on the mechanical oil pressure sender. | Low oil level, clogged oil filter, worn oil pump, or a failed pressure switch/sender. | Shut the engine down immediately, check oil level and filter condition, and inspect for leaks before restart. |
| Alternator / Charging System (amber warning lamp) | Alternator output is not charging the battery circuit. | Loose or broken alternator belt, worn brushes, failed regulator, or a bad battery/ground connection. | Check belt tension and battery terminals first, then test alternator output with a multimeter per the machine electrical schematic. |
| Hydraulic Oil Temperature (gauge / warning lamp) | Hydraulic tank oil temperature is above the normal operating band. | Low hydraulic fluid level, clogged oil cooler, extended high-load propel/vibratory operation, or a failing cooler fan drive. | Reduce load, check fluid level and cooler fins for debris, and let the system cool before resuming work. |
| Air Cleaner Restriction indicator | Intake air filter restriction has reached the service limit. | Dirty or clogged primary air filter element from dusty paving/compaction sites. | Inspect and clean or replace the air filter element per the service interval; reset the restriction indicator after service. |
| Fuel Level (low fuel warning) | Fuel tank level has dropped to the reserve range on the sender. | Normal fuel consumption nearing empty, or a fuel gauge sender fault if the lamp stays on after refueling. | Refuel; if the lamp persists after a full tank, check the tank sender and wiring. |
| Parking Brake Engaged indicator | Drum/wheel parking brake is applied, which on this machine also blocks propel. | Brake left engaged, low brake-release pressure, or a faulty brake pressure switch. | Confirm brake release lever/switch position and check hydraulic brake-release pressure before assuming a switch fault. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CS-573C attachments & work tools
Drum shell system
Standard equipment is a smooth steel drum sized for the 533C-583C family, about 2130 mm (84 in) wide. A bolt-on padfoot (sheepsfoot) shell kit is available to convert the smooth shell for cohesive and semi-cohesive soil compaction, letting one chassis serve as a dual-purpose granular/cohesive-soil machine.
Drum scraper bar
An adjustable scraper bar runs the length of the drum face as standard equipment to strip soil buildup and keep the shell clean; it is a bolted, tensioned bar rather than a plug-in attachment and is set up differently for smooth vs padfoot shells.
Vibratory system arrangement
The compactor is built with a two-amplitude/dual-frequency vibratory drive, selectable between high and low centrifugal force settings from the operator station for lift thickness and soil type. This is a factory drive arrangement, not a bolt-on tool, and force/frequency figures vary by configuration/series within the 533C-583C family.
Operator protection structure
Machines are offered with either a ROPS/FOPS open canopy or an enclosed ROPS/FOPS cab as a factory configuration choice. Cab-equipped machines can add heater/AC and an upgraded high-back or air-ride seat; canopy machines get handrails, floor mat, and mirrors as standard.
Water spray / dust suppression kit
An optional water spray system (tank, pump, and spray bar plumbed to the drum face) is available across this compactor class to limit material pickup and dust on the drum; it is an add-on plumbing kit rather than a quick-coupled tool.
Guarding and lighting package
Optional underguards for the engine and hydraulic lines, plus work-light and beacon packages, are offered for job-site protection and visibility on this compactor class; exact package content varies by configuration/series and region.
Mounting method for drum work tools
This machine class does not use a skid-steer-style quick coupler. Shell/pad changes are made by unbolting the smooth drum shell and bolting on the padfoot shell kit directly to the drum shell mounts, a shop-level conversion rather than a field quick-attach swap.
All CS-573C assemblies by section
Every catalogued assembly group for the Caterpillar CS-573C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
143-9753 Air Cleaner Gp
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
117-2884 Air Cleaner Gp
| 11***84 | Air Cleaner Group | 1 |
| 12***46 | Precleaner Group | 1 |
| 14***05 | Bracket | 1 |
140-1690 Air Cleaner Gp
| 14***90 | Air Cleaner Group | 1 |
| 7C***07 | Elbow | 1 |
| 7C***19 | Hose | 2 |
6i-2551 Air Cleaner Gp
| 12***46 | Precleaner Group | 1 |
| 14***05 | Bracket | 1 |
| 14***06 | Hose-Air | 1 |
1n-4877 Cover Gp-Inlet Manifold
| 11***50 | Gasket | 1 |
| 1N***77 | Cover Group-Inlet Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
1w-6029 Lines Gp-Air
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***40 | Pipe-Exhaust | 1 |
7w-9248 Manifold Gp-Exhaust
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***40 | Pipe-Exhaust | 1 |
4w-3480 Manifold Gp-Inlet
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***22 | Bracket | 1 |
141-4965 Muffler Gp
| 14***65 | Muffler Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 4P***84 | Turbocharger Group | 1 |
124-8533 Muffler Gp
| 12***33 | Muffler Group | 1 |
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
117-2882 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 11***82 | Muffler Group | 1 |
| 12***34 | Muffler | 1 |
140-1695 Muffler Gp
| 13***43 | Clamp-Hose | 1 |
| 14***95 | Muffler Group | 1 |
| 1M***50 | Bowl | 1 |
4m-0310 Precleaner Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4M***10 | Precleaner As | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***86 | Cartridge Group-Turbocharger | 1 |
4p-4682 Turbocharger Gp
| 10***64 | Cartridge Group-Turbocharger | 1 |
| 11***59 | Housing; (Turbine) | 1 |
| 12***39 | Housing (Compressor) | 1 |
135-6635 Turbocharger Gp
| 13***35 | Turbocharger Group | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
4p-4684 Turbocharger Gp
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***42 | Base Assem. | 1 |
141-8274 Turbocharger Gp
| 14***74 | Turbocharger Group | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
4p-2120 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***20 | Turbocharger Group | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
2w-9608 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2W***08 | Camshaft Group-Single | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
7c-0299 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
7e-2986 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
100-4948 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
2w-9746 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 2W***46 | Cylinder Block Group | 1 |
7c-5826 Cylinder Block Gp
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2W***11 | Bearing-Sleeve; (Camshaft) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
115-4108 Cylinder Head As
| 11***07 | Cylinder Head As | 1 |
| 11***08 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 12 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
119-3065 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 11***65 | Cylinder Head As | 1 |
| 12***53 | Insert-Valve Seat; (Inlet) | 6 |
140-7373 Cylinder Head As
| 11***36 | Seal-Valve Stem | 12 |
| 14***73 | Cylinder Head As | 1 |
| 19***66 | Cylinder Head As | 1 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
4p-8263 Cylinder Head Gp
| 11***80 | Valve-Inlet | 6 |
| 11***36 | Seal-Valve Stem | 12 |
| 11***65 | Cylinder Head As | 1 |
115-4165 Cylinder Head Gp
| 10***79 | Valve-Exhaust | 6 |
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
4p-8264 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
136-8877 Drain Gp-Engine Oil
| 13***77 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
158-2203 Drive Gp-Accessory
| 10***69 | Adapter | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 15***03 | Drive Group-Accessory | 1 |
9y-0608 Drive Gp-Accessory
| 13***19 | Seal-Integral; (Integral) | 1 |
| 7C***89 | Adapter | 1 |
| 9H***72 | Gasket | 1 |
7e-8945 Drive Gp-Accessory
| 13***19 | Seal-Integral; (Integral) | 1 |
| 3G***97 | Seal-Lip Type | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
124-8917 Drive Gp-Pump
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 11***76 | Plate-Adapter | 1 |
| 12***17 | Drive Group-Pump | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***14 | Bearing As-Ball | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
115-4175 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***71 | Shaft | 1 |
| 11***72 | Bearing | 1 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
116-7494 Mounting Gp-Engine Flexible
| 10***04 | Mount As | 1 |
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 7X***53 | Bolt-Plt; (5/8unc X 4 1/4) | 2 |
4w-0269 Pan Gp-Oil
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
108-5758 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 10***58 | Piston & Rod Group | 1 |
115-4084 Piston & Rod Gp
| 11***84 | Piston & Rod Group | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
4w-5429 Pulley Gp-Crankshaft
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
9y-0757 Pulley Gp-Fan Drive
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
107-7722 Rocker Arm Gp
| 10***22 | Rocker Arm Group-Valve | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
| 7C***63 | Seal Group-Crankshaft; (Front)(Front) | 1 |
4w-1016 Seal Gp-Crankshaft
| 11***09 | Seal Group-Crankshaft | 1 |
| 11***21 | Seal Group-Crankshaft; (Front) | 1 |
| 4R***99 | Excluder-Crankshaft Seal | 1 |
115-4203 Seal Gp-Crankshaft
| 10***22 | Rocker Arm Group-Valve | 6 |
| 11***03 | Seal Group-Crankshaft | 1 |
| 14***47 | Arm As-Lifter | 4 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
2w-9607 Valve Mechanism Gp
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 2W***07 | Valve Mechanism Group; Fuel Pump And Valve Mechanism Group | 1 |
| 6V***21 | Bolt; (M8x1.25mmx110mm) | 1 |
Braking System
109-2973 Control Gp-Service Brake
| 10***73 | Control Group-Service Brake | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
106-9047 Lines Gp-Service Brake
| 10***47 | Lines Group-Brake | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
118-3782 Lines Gp-Service Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***82 | Lines Group-Service Brake | 1 |
| 1G***76 | Valve Group-Check; (Brake Control) | 1 |
147-2805 Lines Gp-Service Brake
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 12***68 | Steering Column | 1 |
115-8488 Pump Gp-Hand
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
124-8942 Valve & Mtg Gp-Brake & Shift
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***06 | Pin As | 4 |
| 11***19 | Cylinder Group-Hydraulic | 2 |
107-1107 Valve & Mtg Gp-Brake & Shift
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 10***07 | Valve & Mtg Group-Brake & Shift | 1 |
1g-9759 Valve Gp-Brake & Shift
| 10***66 | Sleeve-Abrasion | 1 |
| 10***90 | Clamp-Block | 1 |
| 12***66 | Bar | 2 |
Cooling System
7c-5467 Adapter Gp-Fan
| 08***85 | Guard As-Fan | 1 |
| 1F***50 | Nut Rops Support | 1 |
| 2P***21 | Spider As-Fan; Spider As--609.6 mm (24 In.) Diameter | 1 |
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
4w-2913 Cooler Gp-Engine Oil
| 08***85 | Guard As-Fan | 2 |
| 12***78 | Fan-Blower | 1 |
| 14***76 | Bushing; Replaces 420434a1, Bushing, Spacer; (11x25.4x26-mm Thk)(11x25.4x26mm Thk) | 6 |
125-7863 Fan Gp-Blower
| 12***63 | Fan Group-Blower | 1 |
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
117-2883 Fan Gp-Blower
| 11***83 | Fan Group-Blower | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
4w-6620 Housing & Regulator Gp
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-4508 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 17***58 | Plug | 1 |
159-3142 Pump Gp-Water
| 07***26 | Clamp | 3 |
| 11***20 | Tube | 1 |
| 11***19 | Bracket | 1 |
7c-6438 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 17***58 | Plug | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
159-3137 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
7c-7030 Pump Gp-Water
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 08***98 | Valve, Drain R/6b***63; (Radiator) | 1 |
| 11***00 | Radiator Group | 1 |
116-7496 Radiator & Hyd Oil Cooler Gp
| 07***26 | Clamp | 3 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***20 | Tube | 1 |
Electrical And Starting System
117-2885 Alternator Gp-Charging
| 11***85 | Alternator Group-Charging | 1 |
| 11***06 | Battery & Wiring Group | 1 |
| 12***60 | Wiring Group-Machine | 1 |
9w-3043 Alternator Gp-Charging
| 11***06 | Battery & Wiring Group | 1 |
| 12***60 | Wiring Group-Machine | 1 |
| 12***61 | Wiring Group-Engine | 1 |
118-6506 Battery & Wiring Gp
| 10***11 | Switch As-Roller | 1 |
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
160-3782 Electrical Ar
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
| 12***65 | Switch As-Roller; (Bucket Kickout & Positioner)) | 1 |
125-2645 Electrical Ar
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
| 12***45 | Electrical Ar | 1 |
117-2880 Interlock Gp-Vibr & Throttle
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
140-1738 Interlock Gp-Vibr & Throttle
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
9x-1439 Lamp Gp-Flood -Vertical
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***49 | Screw-Lens | 2 |
| 13***51 | Lens; (Registration Plate) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 08***42 | Lamp Group; (Signal-Front) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***50 | Lamp Group-Head & Signal; -Rh | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***49 | Lamp Group-Head & Signal; -Lh | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
117-8319 Lamp Gp-Registration Plate
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***19 | Lamp Group-Registration Plate; -Eu | 1 |
121-5904 Lamp Gp-Signal
| 12***04 | Lamp Group-Signal | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
127-1561 Lamp Gp-Signal
| 12***61 | Lamp Group-Signal | 1 |
| 1A***21 | Grommet | 2 |
| 2H***20 | Lockwasher (11.38mm Id) | 2 |
121-5903 Lamp Gp-Signal
| 12***03 | Lamp Group-Signal | 1 |
| 12***06 | Harness As-Lighting; (Signal) | 1 |
| 12***60 | Lamp; (Running Lt, Stop, Turn Sig, Lh) | 1 |
127-1558 Lamp Gp-Signal
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 12***58 | Lamp Group-Signal | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
3e-6466 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***50 | Lamp; (Front, Rh)(Running/Turn Signal) | 1 |
121-2547 Lamp Gp-Signal
| 12***47 | Lamp Group-Signal | 1 |
| 12***05 | Harness As-Lighting; (Signal) | 1 |
| 12***59 | Lamp; (Running Lt, Stop, Turn Sig, Rh) | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 1A***21 | Grommet | 2 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
146-8387 Lamp Gp-Warning Beacon
| 12***98 | Harness As-Wiring | 1 |
| 12***56 | Bracket-Guard | 2 |
| 14***87 | Lamp Group-Warning Beacon | 1 |
121-4058 Lighting Gp-Cab
| 08***55 | Nut | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
120-3996 Lighting Gp-Flood
| 08***55 | Nut | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
126-3628 Lighting Gp-Roading
| 08***02 | Washer | 1 |
| 08***01 | Screw | 1 |
| 08***44 | Rotary Eccentric Relay | 1 |
128-6557 Lighting Gp-Signal
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***57 | Lighting Group-Signal | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
175-7459 Lighting Gp-Warning
| 15***52 | Solenoid As; (Fuel Shutoff) | 1 |
| 17***59 | Lighting Group-Warning | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
081-4135 Regulator Gp-Voltage
| 08***35 | Regulator As | 1 |
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
120-3885 Sensor Gp-Speed
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
7c-4028 Solenoid Gp-Shutoff
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***66 | Wire As | 1 |
121-6812 Starting Aid Gp
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
102-8823 Starting Aid Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***23 | Starting Aid Group; (Heater) | 1 |
| 12***46 | Tube As | 1 |
140-2379 Starting Aid Gp
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 14***79 | Starting Aid Group; -Switch, Wiring | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
121-6814 Starting Aid Gp-Ether
| 12***14 | Starting Aid Group-Ether | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 3 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
207-1517 Starting Motor Gp-Electric
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
106-8558 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8557 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
108-3858 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
207-1511 Starting Motor Gp-Electric
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
106-8559 Starting Motor Gp-Electric
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
6v-5720 Starting Motor Gp-Electric
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
104-7040 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
167-0138 Switch Gp-Magnetic
| 12***77 | Bracket | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 2 |
175-2322 Switch Gp-Magnetic
| 15***08 | Plate | 1 |
| 15***09 | Plate | 1 |
| 15***17 | Button | 2 |
3e-0075 Switch Gp-Magnetic
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
175-2324 Switch Gp-Magnetic
| 11***19 | Wire As | 1 |
| 11***20 | Wire As | 2 |
| 11***21 | Harness As | 1 |
9g-7641 Switch Gp-Start
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***35 | Console Group-Operator | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 14 |
129-1551 Warning Gp-Backup
| 05***02 | Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
118-6508 Warning Gp-Backup
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***11 | Switch As-Pressure; (Engine Oil) | 1 |
| 11***13 | Harness As-Power | 1 |
159-3859 Wiring Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***11 | Switch As-Pressure; (Engine Oil) | 1 |
122-7091 Wiring Gp-Cab
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
114-8619 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 11***19 | Wiring Group-Cab | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
125-4461 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***35 | Console Group-Operator | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 14 |
140-1699 Wiring Gp-Engine
| 13***96 | Axle Group | 1 |
| 14***99 | Wiring Group-Engine | 1 |
| 1D***24 | Bolt--19 mm (3/4 Inches) X 229 mm (9 Inches) | 8 |
125-4460 Wiring Gp-Machine
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***44 | Rod-Brake Control | 2 |
| 05***55 | Pin-Pivot | 2 |
125-6726 Wiring Gp-Platform
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***44 | Rod-Brake Control | 2 |
| 05***55 | Pin-Pivot | 4 |
Engine Arrangement
111-7718 Engine Ar
| 10***32 | Pump Group-Fuel Injection | 6 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***18 | Engine Ar | 1 |
133-4248 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
140-9649 Installation Ar-Engine
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***82 | Muffler Group | 1 |
125-2643 Installation Ar-Engine
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***80 | Interlock Group-Vibr & Throttle | 1 |
Frame And Body
1g-4151 Block Gp
| 08***24 | Seal; (1.87-M Each) | 0 |
| 12***85 | Door As; (Rear) | 1 |
| 12***91 | Latch-Door | 1 |
119-4605 Bumper Gp-Front
| 06***44 | Grommet | 2 |
| 11***36 | Angle | 2 |
| 11***76 | Panel-Hood | 1 |
123-9307 Door Gp-Access
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 10***24 | Plate | 1 |
123-9304 Door Gp-Access
| 11***78 | Fender; (Rh) | 1 |
| 11***80 | Fender; (Lh) | 1 |
| 11***88 | Fender; (Lh) | 1 |
124-7184 Door Gp-Radiator
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 10***24 | Plate | 1 |
116-5278 Enclosure Gp-Engine
| 11***66 | Grill As | 1 |
| 11***79 | Guard As-Radiator | 1 |
| 11***78 | Enclosure Group-Engine | 1 |
144-0484 Enclosure Gp-Engine
| 11***99 | Rod As; (Enclosure-Engine) | 1 |
| 12***78 | Guard As-Radiator | 1 |
| 12***84 | Door Group-Radiator | 1 |
112-5036 Fender Gp-Wide
| 09***91 | Pin - Spring | 4 |
| 11***36 | Fender Group-Wide | 1 |
| 12***05 | Insulation | 1 |
125-4462 Frame Gp-Main
| 12***62 | Frame Group-Main | 1 |
| 3E***61 | Locknut; (5/8-11-Thd) | 4 |
| 7R***49 | Guard As | 1 |
142-6937 Frame Gp-Main
| 11***37 | Scraper Group-Drum; -Rear | 1 |
| 11***53 | Scraper Group-Drum | 1 |
| 14***37 | Frame Group-Main | 1 |
116-5280 Guard Gp-Radiator
| 11***37 | Scraper Group-Drum; -Rear | 1 |
| 11***80 | Guard Group-Radiator | 1 |
| 13***64 | Scraper Group-Smooth Drum | 1 |
122-0312 Guard Gp-Radiator
| 10***10 | Bolt-Carriage | 5 |
| 10***60 | Bracket | 4 |
| 11***34 | Plate-Backing | 2 |
123-3010 Guard Gp-Sound Suppression
| 10***10 | Bolt-Carriage | 5 |
| 11***69 | Bracket | 4 |
| 11***34 | Plate-Backing | 2 |
087-0776 Guard Gp-Transmission
| 08***76 | Guard Group-Transmission; Guard Gp-Transmission | 1 |
| 10***10 | Bolt-Carriage | 4 |
| 11***69 | Bracket | 4 |
115-4052 Scraper Ar-Drum
| 10***10 | Bolt-Carriage | 5 |
| 11***69 | Bracket | 4 |
| 11***34 | Plate-Backing | 2 |
139-4563 Scraper Ar-Drum
| 07***92 | Mount, Rubber Shock | 2 |
| 10***10 | Bolt-Carriage | 2 |
| 13***63 | Scraper Ar-Drum | 1 |
115-0537 Scraper Gp-Smooth Drum
| 11***37 | Scraper Group-Drum; -Rear | 1 |
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
115-4053 Scraper Gp-Smooth Drum
| 11***53 | Scraper Group-Drum | 1 |
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
115-4054 Scraper Gp-Smooth Drum
| 11***54 | Scraper Group-Drum | 1 |
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
154-2352 Scraper Gp-Smooth Drum
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
139-4564 Scraper Gp-Smooth Drum
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
124-4613 Suppression Ar-Sound
| 12***92 | Angle As | 1 |
| 12***93 | Angle As | 1 |
| 12***94 | Insulation | 1 |
124-8650 Suppression Ar-Sound
| 12***92 | Angle As | 1 |
| 12***93 | Angle As | 1 |
| 12***94 | Insulation | 1 |
124-8654 Suppression Ar-Sound
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
121-4659 Suppression Gp-Sound
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
124-2376 Suppression Gp-Sound
| 08***35 | Tee | 1 |
| 11***24 | Hose As | 1 |
| 11***91 | Hose As | 1 |
141-6630 Suppression Gp-Sound
| 08***35 | Tee | 1 |
| 11***24 | Hose As | 1 |
| 11***91 | Hose As | 1 |
162-2155 Suppression Gp-Sound
| 11***20 | Pump | 1 |
| 11***21 | Valve-Check | 2 |
| 16***55 | Suppression Group-Sound | 1 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 12***02 | Base Group-Fuel Filter | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
105-1695 Control Gp-Fuel Injection
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 10***95 | Control Group-Fuel Injection | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-6989 Control Gp-Fuel Injection
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 05***02 | Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
7e-9429 Control Gp-Governor
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
183-4680 Control Gp-Governor
| 00***64 | End; (Hose) | 2 |
| 09***88 | Clamp; (Hose) | 2 |
| 10***89 | Hose As | 1 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***01 | Insert-Filter | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 10***79 | Governor Group-Unit Injector | 1 |
| 4P***58 | Spring-Low Idle | 1 |
| 4P***74 | Cam-Torque | 1 |
6i-2693 Filter Gp-Fuel
| 4P***12 | Governor Group-Unit Injector | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
140-9008 Filter & Lines Gp-Fuel
| 13***52 | Governor Group-Unit Injector | 1 |
| 14***08 | Fuel Filter & Lines Group | 1 |
| 4P***58 | Spring-Low Idle | 1 |
131-4852 Governor Gp-Unit Injector
| 10***91 | Spring-Oil Side | 1 |
| 10***89 | Cam As | 1 |
| 13***52 | Governor Group-Unit Injector | 1 |
4p-5512 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
132-5238 Governor Gp-Unit Injector
| 10***68 | Adapter | 1 |
| 11***68 | Hose As | 1 |
| 13***38 | Governor Group-Unit Injector | 1 |
133-3062 Governor Gp-Unit Injector
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 10***68 | Adapter | 1 |
| 11***88 | Hose As | 1 |
133-3960 Governor Gp-Unit Injector
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
100-6179 Governor Gp-Unit Injector
| 10***90 | Spring-Air Side | 1 |
| 10***92 | Spring-Servo | 1 |
| 10***93 | Spring-Return | 1 |
7e-7661 Governor Gp-Unit Injector
| 13***60 | Governor Group-Unit Injector | 1 |
| 7E***61 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
125-4459 Lines Gp-Fuel
| 10***80 | Tube Assem. | 1 |
| 12***59 | Lines Group-Fuel | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
140-1693 Lines Gp-Fuel
| 14***93 | Lines Group-Fuel | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
6i-2420 Lines Gp-Fuel Filter
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
| 12***16 | Fuel Injector Group | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
7w-8434 Lines Gp-Governor Oil
| 11***20 | Bracket | 1 |
| 7W***34 | Lines Group-Governor Oil; Governor Oil Lines Group | 1 |
| 8N***51 | Pump Group-Fuel Prime & Prim Filter | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
8n-5251 Pump Gp-Fuel Prm & Prim Filter
| 00***70 | Nipple-Strainer To Flange | 1 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***51 | Tank Group-Fuel | 1 |
8n-3365 Pump Gp-Fuel Priming
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
117-2887 Pump Gp-Fuel Priming
| 00***70 | Nipple-Strainer To Flange | 1 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***51 | Tank Group-Fuel | 1 |
127-6449 Pump Gp-Fuel Prm & Water Sep
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***49 | Pump Group-Fuel Prm & Water Sep | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
124-8950 Tank & Mtg Gp-Fuel
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 12***50 | Tank & Mtg Group-Fuel | 1 |
129-1101 Valve Gp-Check
| 03***17 | Tread-Nonskid | 2 |
| 11***28 | Cable Assem. | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
Hydraulic System
178-3886 Actuator Gp-Pump
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 17***86 | Actuator Group-Pump; -Vibratory Piston Pump | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
087-1788 Cap & Strainer Gp-Hyd Oil Fill
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
119-7219 Cylinder Gp-Hydraulic
| 11***19 | Cylinder Group-Hydraulic | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
125-0652 Filter & Mtg Gp-Hydraulic
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***28 | Screw | 2 |
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
122-1786 Filter Gp-Oil -Hydraulic
| 10***77 | Lines Group-Cylinder | 1 |
| 11***20 | Cylinder & Mtg Group-Steering | 1 |
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
133-5343 Filter Gp-Oil
| 13***43 | Filter Group-Oil | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
077-5200 Gauge Gp-Sight
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 11***16 | Seal | 1 |
| 12***69 | Plug | 2 |
177-0697 Head Gp-Pump -Piston And Gear Pump
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 12***42 | Mounting Parts, Hose As | 1 |
125-2655 Hydraulic Ar-Auxiliary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 12***39 | Hose As | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 11***05 | Hose As | 1 |
| 12***37 | Hose As | 1 |
| 12***80 | Plate | 1 |
128-1069 Kit-Pump Control
| 10***23 | Ring-Retaining | 2 |
| 10***24 | Shim; (0.3mm Thk) | 1 |
| 10***25 | Shim; (0.4mm Thk) | 1 |
125-3514 Lines Gp-Auxiliary Hydraulic
| 11***73 | Orifice | 1 |
| 12***69 | Shim; (4.05 mm) | 1 |
| 12***70 | Shim; (5.1-mm) | 1 |
125-0649 Lines Gp-Hydraulic Filter
| 03***28 | Seal-O-Ring | 1 |
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 4 |
| 09***95 | Dowel | 1 |
125-0651 Lines Gp-Hydraulic Filter
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
124-9081 Lines Gp-Hydraulic Oil Cooler
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
172-4843 Motor Gp-Piston
| 03***05 | Seal-O-Ring | 2 |
| 07***80 | Handle | 1 |
| 07***53 | Pin; (Spring) | 2 |
149-0208 Motor Gp-Piston
| 00***63 | Seal-O-Ring; (55.24mm Id) | 3 |
| 09***15 | Ring-Retaining | 1 |
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
123-5259 Motor Gp-Piston -Propel, Drum
| 00***63 | Seal-O-Ring; (55.24mm Id) | 4 |
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
| 09***47 | Pin, Dowel | 2 |
116-7501 Motor Gp-Piston
| 10***54 | Spring | 1 |
| 10***55 | Seal-Shaft | 1 |
| 10***58 | Kit-Seal; (Valve) | 1 |
112-7188 Motor Gp-Piston
| 11***88 | Motor Group-Piston | 1 |
| 15***57 | Seal-O-Ring | 1 |
| 17***53 | Rotating Group-Motor; -Hydraulic Oil Cooling Fan | 1 |
108-4090 Motor Gp-Piston
| 03***28 | Seal-O-Ring | 1 |
| 09***97 | Washer, Spring | 6 |
| 09***94 | Pin, Dowel | 1 |
123-5260 Motor Gp-Piston -Propel, Axle
| 03***05 | Seal-O-Ring | 2 |
| 07***80 | Handle | 1 |
| 07***53 | Pin; (Spring) | 2 |
123-5263 Pump Gp-Gear
| 11***38 | Pump Group-Piston | 1 |
| 12***63 | Pump Group-Gear | 1 |
| 12***16 | Pump Group-Piston | 1 |
147-6697 Pump Gp-Hydraulic
| 08***74 | Nozzle | 2 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***26 | Pin | 1 |
159-9455 Pump Gp-Piston -Vibratory, Fixed Displacement
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
123-7316 Pump Gp-Piston
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 7 |
| 12***16 | Pump Group-Piston | 1 |
| 14***88 | Shaft | 1 |
117-0438 Pump Gp-Piston
| 11***38 | Pump Group-Piston | 1 |
| 7R***15 | Kit-Rotary | 1 |
| 7R***16 | Kit-Shaft & Bearing | 1 |
123-5262 Pump Gp-Piston
| 11***16 | Screw | 14 |
| 12***62 | Pump Group-Piston | 1 |
| 13***83 | Pin-Center | 1 |
147-6188 Pump Gp-Piston
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 7 |
| 14***90 | Plate | 1 |
| 14***94 | Barrel | 1 |
7r-3708 Rotating Gp-Motor
| 00***70 | Nipple-Strainer To Flange | 1 |
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
171-6853 Rotating Gp-Motor
| 11***16 | Orifice | 1 |
| 12***98 | Plug | 1 |
| 13***67 | Poppet-Relief V | 1 |
144-0585 Rotating Gp-Motor
| 10***17 | Seal-O-Ring | 2 |
| 10***18 | Seal-O-Ring | 3 |
| 11***73 | Orifice | 1 |
137-4581 Rotating Gp-Motor -Propel
| 12***85 | Valve Group-Bypass | 1 |
| 12***13 | Bracket As | 1 |
| 13***81 | Rotating Group-Motor; -Propel | 1 |
177-0251 Rotating Gp-Pump -Piston And Gear Pump
| 10***17 | Seal-O-Ring | 2 |
| 12***91 | Plug | 2 |
| 12***96 | Valve-Piston | 1 |
125-0656 Tank & Mtg Gp-Hydraulic
| 10***17 | Seal-O-Ring | 2 |
| 10***18 | Seal-O-Ring | 2 |
| 10***04 | Seal-O-Ring | 1 |
124-8921 Valve & Mtg Gp-Bypass
| 11***16 | Seal | 1 |
| 12***94 | Plug; (Break Off) | 2 |
| 12***21 | Valve & Mtg Group-Bypass | 1 |
110-6396 Valve Gp-Flushing
| 11***96 | Valve Group-Flushing | 1 |
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
139-7747 Valve Gp-Flushing -Propel Motor
| 12***34 | Ring-Backup | 1 |
| 13***47 | Valve Group-Flushing; -Propel Motor | 1 |
| 17***25 | Pin-Threaded | 1 |
194-8505 Valve Gp-Flushing -Vibratory Piston Motor
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 16***15 | Retainer-Spring | 1 |
208-8003 Valve Gp-Pump Control
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 14***74 | Plate | 1 |
| 14***75 | Plate As | 1 |
177-7122 Valve Gp-Relief
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
112-4634 Valve Gp-Relief
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 14***74 | Plate | 1 |
126-4494 Valve Gp-Relief -Piston Pump
| 06***08 | Ring-Retaining | 1 |
| 07***92 | Mount, Rubber Shock | 6 |
| 11***01 | Motor Group-Piston | 1 |
Lubrication System
1n-3477 Breather Gp
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6I***99 | Tube As | 1 |
6i-4515 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6I***15 | Filler Group-Oil | 1 |
| 6L***09 | Seal-Rubber | 1 |
7e-3626 Filler Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
4p-8183 Filter Gp-Engine Oil
| 1R***58 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2P***37 | Stud Engine Oil Filter | 1 |
7c-0271 Filter Gp-Engine Oil
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***71 | Filter Group-Engine Oil | 1 |
7w-8420 Fumes Disposal Gp
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 2 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
166-6543 Gauge Gp-Oil Level (Dipstick)
| 16***43 | Gauge Group-Oil Level (Dipstick) | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
6i-2685 Gauge Gp-Oil Level (Dipstick)
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
132-2792 Gauge Gp-Oil Level (Dipstick)
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 13***92 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
4w-2914 Lines Gp-Engine Oil
| 10***76 | Hose As | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 3 |
117-2886 Lines Gp-Engine Oil
| 11***86 | Lines Group-Engine Oil | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
1w-6030 Lines Gp-Turbocharger Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
4w-2195 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
| 2W***78 | Plunger-Relief | 1 |
200-4497 Pump Gp-Engine Oil
| 18***95 | Core As-Engine Oil Cooler | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7C***60 | Gasket | 1 |
119-2924 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 5P***96 | Plug; (Straight Thread O-Ring) | 1 |
Machine Arrangement
125-2648 Chassis Ar
| 11***54 | Scraper Group-Drum | 1 |
| 11***78 | Enclosure Group-Engine | 1 |
| 11***05 | Bumper Group-Front | 1 |
125-2640 General Ar
| 11***18 | Engine Ar | 1 |
| 11***18 | Power Train Ar | 1 |
| 12***40 | General Ar | 1 |
Operator Station
154-6318 Air Conditioner Ar
| 08***67 | Lamp; (24-Volt, 5-Watt) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***23 | Collar | 2 |
125-4138 Cab Ar
| 08***72 | Seal | 1 |
| 08***25 | Guide | 1 |
| 12***83 | Harness As | 1 |
122-5920 Cab Ar
| 08***25 | Guide | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***20 | Cab Ar | 1 |
125-9547 Cab Ar
| 08***69 | Bolt-Socket Head; (M10x1.5x130-mm) | 1 |
| 12***47 | Cab Ar | 1 |
| 15***70 | Compressor Group-Refrigerant | 1 |
123-3878 Cab Gp
| 08***00 | Lockwasher; (2.3mm Thk) | 4 |
| 12***78 | Cab Group | 1 |
| 15***71 | Condensor | 1 |
138-6212 Compactometer Ar-Cvm & Freq
| 08***35 | Lighting Group-Warning | 1 |
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
138-6213 Compactometer Ar-Cvm Frq & Spd
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
| 10***08 | Film-Instrument | 1 |
159-3860 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
| 11***09 | Panel As-Control | 1 |
159-3867 Condenser & Mtg Gp-Refrigerant
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
| 10***35 | Console Group-Operator | 1 |
117-9982 Console Gp-Instrument
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
126-3629 Console Gp-Operator
| 03***38 | Screw; (6-32x1.0in) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
134-3842 Console Gp-Operator
| 08***19 | Seal-Rubber | 2 |
| 08***96 | Adapter | 2 |
| 08***13 | Hose | 2 |
128-6558 Console Gp-Operator
| 03***77 | Ball Joint | 1 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
| 10***13 | Cable Group-Throttle | 1 |
109-1035 Console Gp-Operator
| 03***38 | Screw; (6-32x1.0in) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
117-2909 Control Gp-Direction & Speed
| 08***19 | Seal-Rubber | 2 |
| 08***72 | Lever | 1 |
| 08***82 | Clamp | 2 |
140-1697 Control Gp-Direction & Speed
| 10***41 | Handle | 1 |
| 10***44 | Latch As-Rotary | 1 |
| 11***26 | Window Group-Cab | 1 |
132-8896 Cylinder & Mtg Gp-Tilt
| 13***96 | Cylinder & Mtg Group-Tilt | 1 |
| 15***00 | Filter Element As-Cab Air | 1 |
| 15***15 | Bracket | 1 |
086-9528 Cylinder & Mtg Gp-Tilt
| 08***28 | Cylinder Group-Mounting | 1 |
| 15***72 | Evaporator Group-Refrigerant | 1 |
| 15***53 | Bracket-Lh | 1 |
111-2548 Door Gp-Cab
| 10***89 | Guard-Magneto Sensor | 1 |
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 11***48 | Door Group-Cab | 1 |
153-2672 Evaporator Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 12***32 | Tachometer; (-Instrument) | 1 |
159-3836 Evaporator Gp-Refrigerant
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 12***32 | Tachometer; (-Instrument) | 1 |
| 14***84 | Guard-Magneto Sensor | 1 |
159-3868 Filter Gp-Cab Air
| 10***51 | Cover | 1 |
| 15***68 | Filter Group-Cab Air | 1 |
| 1G***95 | Bolt | 2 |
121-2478 Gauge Gp-Vibratory
| 10***98 | Motor | 1 |
| 10***56 | Plate-Base | 1 |
| 10***57 | Hood | 2 |
145-0439 Gauge Gp-Vibratory
| 11***43 | Harness As | 1 |
| 14***39 | Gauge Group-Vibratory | 1 |
| 7T***69 | Horn As; (24-Volt, Low Tone) | 1 |
121-2001 Gauge Gp-Vibratory
| 12***01 | Gauge Group-Vibratory | 1 |
| 1G***53 | Core As | 1 |
| 1G***72 | Turbine Group-Heater | 1 |
108-7735 Guard Gp-Vandalism
| 10***35 | Guard Group-Vandalism | 1 |
| 13***34 | Spacer | 2 |
| 13***35 | Spacer | 2 |
1g-6588 Control Gp-Handle
| 15***46 | Evaporator | 1 |
| 15***49 | Valve | 1 |
| 15***50 | Clamp | 1 |
1g-3752 Heater Gp-Cab
| 12***73 | Plate | 2 |
| 1G***52 | Heater Group-Cab | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
112-9156 Horn Gp-Electric
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
| 11***56 | Horn Group-Electric | 1 |
136-6880 Kit-Cab Mount
| 13***80 | Kit-Cab Mount | 1 |
| 15***75 | Hose As | 1 |
| 15***76 | Hose As | 1 |
134-3013 Kit-Seat
| 10***41 | Connector-Tube | 4 |
| 13***61 | Sleeve-Abrasion; (93.5-cm Each) | 0 |
| 13***13 | Kit-Seat | 1 |
7r-6606 Lever Gp-Propel
| 10***41 | Connector-Tube | 4 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4S***55 | Clip--Clip Hose As. To 5-Stem Valve | 1 |
111-1366 Lever Gp-Propel
| 11***66 | Lever Group-Propel | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
135-2929 Module Gp-Warning Indicator -Engine Temperature
| 10***28 | Seat Group | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 12***57 | Platform Group-Operator | 1 |
159-3834 Lines Gp-Air Conditioner
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
121-6698 Lines Gp-Cab Heater
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
127-8898 Lines Gp-Cab Heater
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 12***98 | Lines Group-Cab Heater | 1 |
124-7491 Mirror Gp-Rear View
| 08***97 | Washer | 2 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***25 | Door As | 1 |
127-8668 Module Gp-Speed & Vibratory
| 08***97 | Washer | 2 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 12***68 | Module Group-Speed & Vibratory | 1 |
121-6697 Mounting Gp-Cab
| 05***02 | Plug | 1 |
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
133-9646 Mounting Gp-Cab
| 08***45 | Kit-Pump Repair | 1 |
| 08***27 | Lever-Control | 1 |
| 13***46 | Mounting Group-Cab | 1 |
125-2652 Operator Ar
| 10***73 | Control Group-Service Brake | 1 |
| 11***26 | Brake & Axle Group | 1 |
| 11***36 | Fender Group-Wide | 1 |
125-0657 Platform Gp-Operator
| 12***37 | Rops As | 1 |
| 12***57 | Platform Group-Operator | 1 |
| 6V***46 | Trim; (5-Dm) | 0 |
082-6396 Pump Gp-Cab Tilt
| 08***96 | Pump Group-Cab Tilt | 1 |
| 10***40 | Handle-Adjustment; (Lumbar) | 1 |
| 6I***79 | Kit; (Foam Seat) | 1 |
125-4137 Rops Ar
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 2 |
| 12***37 | Rops Ar | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
1g-8223 Rops Gp
| 10***29 | Seat Belt Group | 1 |
| 1G***23 | Rops Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
8y-6856 Seat Belt Gp
| 11***43 | Plate | 2 |
| 12***56 | Belt-Tether | 2 |
| 3E***25 | Bolt-Socket Head; (M8x1.25x50-mm) | 4 |
105-7628 Seat Gp
| 10***28 | Seat Group | 1 |
| 4I***98 | Damper Assembly. Kit | 1 |
| 8Y***05 | Kit-Bumper | 1 |
6c-7314 Seat Gp-Suspension
| 11***63 | Pump As-Washer | 2 |
| 11***88 | Tank As-Window Washer | 1 |
| 6C***14 | Seat Group | 1 |
6i-5381 Seat Gp
| 10***38 | Handle; (Reclining-Rh) | 1 |
| 10***39 | Handle-Height & Tilt | 1 |
| 13***31 | Kit-Arm Cushion; (Lh) | 1 |
116-0644 Seat Gp
| 02***24 | Locknut; (1/4-20-Thd) | 2 |
| 11***44 | Seat Group | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 12 |
9v-8184 Seat Gp-Suspension
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
| 13***21 | Glass-Sliding | 1 |
9c-4449 Seat Gp
| 03***43 | Nut; (5/16-18 Thd) | 4 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 4 |
| 4B***71 | Washer Pump Mounting Plate To Adjusting Strap | 4 |
9v-7924 Suspension Gp-Seat
| 00***45 | Sleeve | 2 |
| 00***39 | Elbow | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
4i-9797 Suspension Gp-Seat
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
| 13***21 | Glass-Sliding | 1 |
1g-3772 Heater Gp-Cab
| 09***02 | Swivel | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 1 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
111-2525 Washer Gp-Window
| 11***25 | Washer Group-Window | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
111-2526 Window Gp-Cab
| 11***26 | Window Group-Cab | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
111-2529 Window Gp-Cab
| 11***29 | Window Group-Cab | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
Power Train
117-2656 Axle & Mtg Gp-Drive
| 10***47 | Lines Group-Brake | 1 |
| 10***07 | Valve & Mtg Group-Brake & Shift | 1 |
| 11***56 | Axle & Mtg Group-Drive | 1 |
117-7530 Axle Gp
| 11***30 | Axle Group | 1 |
| 13***96 | Axle Group | 1 |
| 14***05 | Lines Group-Service Brake | 1 |
168-8694 Axle Gp
| 07***92 | Mount, Rubber Shock | 6 |
| 11***52 | Seal-O-Ring | 1 |
| 11***78 | Plate-Drive | 1 |
138-2496 Axle Gp
| 07***92 | Mount, Rubber Shock | 6 |
| 11***52 | Seal-O-Ring | 1 |
| 11***88 | Motor Group-Piston | 1 |
120-9769 Brake & Axle Gp
| 07***08 | Bearing; (Tapered Roller) | 4 |
| 07***84 | Shim; (0.8-mm Thk) | 4 |
| 07***54 | Retainer, Bearing | 4 |
112-4526 Brake & Axle Gp
| 11***52 | Seal-O-Ring | 1 |
| 11***26 | Brake & Axle Group | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
139-2041 Drive Gp-Drum
| 11***38 | Motor & Mtg Group-Propel | 1 |
| 11***82 | Lines Group-Service Brake | 1 |
| 12***18 | Pump & Mtg Group-Propel | 1 |
117-9828 Drive Gp-Drum
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 11***28 | Drive Group-Drum | 1 |
| 14***21 | Shaft | 1 |
139-2034 Drum Gp-Drive & Vibratory
| 13***34 | Drum Group-Drive & Vibratory | 1 |
| 1G***28 | Shim; (1.6-mm Thk) | 8 |
| 1G***29 | Shim; (3-mm Thk) | 8 |
117-9827 Drum Gp-Smooth
| 11***17 | Hose As | 1 |
| 11***18 | Hose As | 1 |
| 11***97 | Clamp | 1 |
139-2037 Drum Gp-Smooth
| 10***90 | Motor Group-Propel | 1 |
| 13***37 | Drum Group-Smooth | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
116-5510 Drum Gp-Smooth
| 10***88 | Bar | 5 |
| 11***17 | Hose As | 1 |
| 11***18 | Hose As | 1 |
7x-8144 Planetary Gp-Final Drive
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
125-2653 Hydraulic Ar-Propel
| 12***60 | Motor Group-Propel; -Propel, Axle | 1 |
| 12***53 | Hydraulic Ar-Propel | 1 |
| 13***11 | Cap; (Tamper Resistant) | 2 |
111-3746 Installation Gp-Drum
| 07***90 | Ring-Retaining | 1 |
| 11***46 | Installation Group-Drum | 1 |
| 2L***93 | Pin,Straight | 3 |
125-4465 Lines Gp-Propel
| 09***07 | Bolt; (M16x2x120-mm) | 6 |
| 09***58 | Ring-Retaining | 3 |
| 12***65 | Lines Group-Propel | 1 |
116-7038 Motor & Mtg Gp-Propel
| 11***38 | Motor & Mtg Group-Propel | 1 |
| 11***81 | Hose As | 2 |
| 11***83 | Hub As-Coupling | 1 |
123-6826 Planetary Gp-Final Drive
| 07***95 | Cap, Valve Stem | 2 |
| 07***06 | Nut-Valve Stem | 2 |
| 07***92 | Valve | 2 |
136-8870 Planetary Gp-Final Drive
| 13***70 | Planetary Group-Final Drive; -Without Motor | 1 |
| 1G***05 | Wheel & Tire Group | 2 |
| 5H***04 | Washer Rear Bracket Assembly To Frame; Washer-Rear Bracket Assembly To Frame | 16 |
116-2618 Power Train Ar
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
124-8918 Pump & Mtg Gp-Propel
| 12***18 | Pump & Mtg Group-Propel | 1 |
| 13***66 | Wheel & Tire Group | 2 |
| 5H***04 | Washer Rear Bracket Assembly To Frame; Washer-Rear Bracket Assembly To Frame | 16 |
130-7966 Wheel & Tire Gp
| 11***60 | Shim; (3-mm Thk) | 4 |
| 11***61 | Shim; (1.6-mm Thk) | 4 |
| 13***66 | Wheel & Tire Group | 1 |
118-5607 Wheel & Tire Gp
| 11***60 | Shim; (3-mm Thk) | 4 |
| 11***61 | Shim; (1.6-mm Thk) | 4 |
| 11***07 | Wheel & Tire Group | 1 |
155-4113 Wheel & Tire Gp
| 06***44 | Grommet | 1 |
| 08***24 | Seal; (1.87-M Each) | 0 |
| 11***34 | Latch-Door | 1 |
1g-3605 Wheel & Tire Gp
| 13***66 | Wheel & Tire Group | 2 |
| 1G***05 | Wheel & Tire Group | 1 |
| 5H***04 | Washer Rear Bracket Assembly To Frame; Washer-Rear Bracket Assembly To Frame | 16 |
130-7967 Wheel & Tire Gp
| 06***44 | Grommet | 1 |
| 08***24 | Seal; (1.87-M Each) | 0 |
| 11***34 | Latch-Door | 1 |
117-9167 Wheel & Tire Gp
| 08***70 | Washer; (Cb524) | 4 |
| 11***67 | Wheel & Tire Group | 1 |
| 1G***49 | Block | 1 |
Service Equipment And Supplies
127-8781 Cart Gp-Filter
| 12***81 | Cart Group-Filter | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
120-8179 Film Gp
| 12***79 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
120-8181 Film Gp
| 12***81 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***26 | Plate-Warning; (No Clearance, Dutch) | 2 |
120-8184 Film Gp
| 12***84 | Film Group | 1 |
| 12***51 | Connector | 1 |
| 12***89 | Valve-Ball | 1 |
120-8183 Film Gp
| 00***07 | Elbow; (90 Degree) | 1 |
| 12***83 | Film Group | 1 |
| 12***87 | Adapter | 1 |
125-7763 Film Gp
| 10***15 | Film-Notice | 1 |
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***08 | Film | 2 |
120-8182 Film Gp
| 12***82 | Film Group | 1 |
| 12***93 | Connector | 1 |
| 12***81 | Cart Group-Filter | 1 |
120-8180 Film Gp
| 12***80 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
128-4238 Flushing Gp-Drum
| 12***38 | Flushing Group-Drum | 1 |
| 5P***44 | Film Warning; On Front Vertical Surface Of Platform On Right Side & Left Side Of Fuel Tank Under The Grab Irons | 2 |
| 6V***11 | Film; Film-Warning. Located On Front Of Fuel | 1 |
128-4242 Flushing Gp-Drum
| 10***15 | Film-Notice | 1 |
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***08 | Film | 2 |
128-4241 Flushing Gp-Drum
| 10***15 | Film-Notice | 1 |
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***08 | Film | 2 |
124-8233 Plate & Film Gp
| 12***33 | Plate & Film Group | 1 |
120-8178 Plate & Film Gp
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***08 | Film | 2 |
| 12***78 | Plate & Film Group | 1 |
146-9426 Plate & Film Gp
| 14***26 | Plate & Film Group | 1 |
119-4607 Plate & Film Gp
| 11***07 | Plate & Film Group | 1 |
| 12***64 | Plate-Rops/Fops | 1 |
| 12***66 | Film-Instruction | 1 |
146-5083 Plate & Film Gp
| 14***83 | Plate & Film Group | 1 |
124-8235 Plate & Film Gp
| 12***35 | Plate & Film Group | 1 |
Steering System
121-6699 Control Gp-Steering
| 10***90 | Clamp-Block | 2 |
| 12***99 | Control Group-Steering | 1 |
| 12***66 | Bar | 4 |
125-0663 Control Gp-Steering
| 10***90 | Clamp-Block | 2 |
| 12***66 | Bar | 4 |
| 12***10 | Hose As | 1 |
119-7220 Cylinder & Mtg Gp-Steering
| 10***90 | Clamp-Block | 1 |
| 11***20 | Cylinder & Mtg Group-Steering | 1 |
| 12***66 | Bar | 1 |
101-8477 Lines Gp-Steering Cylinder
| 10***77 | Lines Group-Cylinder | 1 |
| 12***36 | Seal-Backup | 1 |
| 12***45 | Wiper-Rod | 1 |
125-0662 Lines Gp-Steering
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
121-6700 Lines Gp-Steering
| 11***46 | Hose As | 2 |
| 12***00 | Lines Group-Steering | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 8 |
125-9441 Lines Gp-Steering
| 00***63 | Seal-O-Ring; (55.24mm Id) | 1 |
| 10***99 | Screw | 2 |
| 11***31 | Seal-O-Ring | 1 |
125-1179 Pump & Mtg Gp-Steering
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 12***79 | Pump & Mtg Group-Steering | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
1g-9787 Pump Gp-Metering
| 13***43 | Filter Group-Oil | 1 |
| 1G***87 | Pump Group-Metering | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
Vibratory System
139-2055 Drive Gp-Support & Vibratory
| 12***87 | Shaft | 1 |
| 12***39 | Seal | 2 |
| 12***40 | Bearing | 2 |
117-9829 Drive Gp-Vibratory
| 11***29 | Drive Group-Vibratory | 1 |
| 12***88 | Shaft | 1 |
| 12***39 | Seal | 4 |
125-0650 Filter & Mtg Gp-Hydraulic
| 12***08 | Pump & Mtg Group-Vibratory | 1 |
| 12***49 | Lines Group-Hydraulic Filter | 1 |
| 12***50 | Filter & Mtg Group-Hydraulic | 2 |
1g-6666 Support Gp-Vibratory
| 10***73 | Control Group-Service Brake | 1 |
| 11***26 | Brake & Axle Group | 1 |
| 11***56 | Horn Group-Electric | 1 |
140-8263 Housing Gp-Eccentric Weight
| 10***88 | Bar | 5 |
| 10***38 | Clamp-Half | 2 |
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
140-8265 Housing Gp-Eccentric Weight
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
| 12***41 | Hose As; (3/8-16x4.75in) | 1 |
147-6698 Hydraulic Ar-Vibratory
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
| 12***41 | Hose As; (3/8-16x4.75in) | 1 |
125-2657 Hydraulic Ar-Vibratory
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
| 12***41 | Hose As; (3/8-16x4.75in) | 1 |
125-4466 Lines Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***62 | Pump Group-Piston | 1 |
| 12***09 | Elbow | 2 |
147-4537 Lines Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***09 | Elbow | 2 |
| 14***37 | Lines Group-Vibratory | 1 |
147-6194 Pump & Mtg Gp-Vibratory
| 11***33 | Tube As | 1 |
| 14***94 | Pump & Mtg Group-Vibratory | 1 |
| 15***74 | Latch-Door | 1 |
124-8908 Pump & Mtg Gp-Vibratory
| 07***64 | Seal-O-Ring | 1 |
| 12***08 | Pump & Mtg Group-Vibratory | 1 |
| 13***99 | Seal-Ring | 1 |
145-7341 Pump & Mtg Gp-Vibratory
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***37 | Seal | 1 |
147-0334 Shaft Gp-Eccentric Weight
| 08***28 | Cylinder Group-Mounting | 1 |
| 11***44 | Seat Group | 1 |
| 12***97 | Mounting Group-Cab | 1 |
159-9406 Support Gp-Vibratory -Drive
| 08***28 | Cylinder Group-Mounting | 1 |
| 11***44 | Seat Group | 1 |
| 12***97 | Mounting Group-Cab | 1 |
CS-573C serial number reference
On Cat vibratory compactors the PIN/serial plate is a metal tag riveted to the machine frame, commonly on the frame rail near the articulation joint, low enough to read from ground level without tools. Read the first three characters as the serial number prefix (identifies the specific model/build series), followed by a five-digit sequence number unique to that unit. A separate engine serial plate on the 3116 engine block carries its own prefix and should not be confused with the machine PIN.
| Prefix | Identifies | Notes |
|---|---|---|
| 6LN | CS-573C single-drum vibratory soil/paving compactor (C-series), powered by the Cat 3116 diesel | Parts and service literature for the CS-573C consistently starts the serial range at 6LN00001 and up; no other prefix is documented for this model. The 3116 is shared across the C/D-series compactor family (CP-533/CP-563/CS-531/CS-533/CS-563/CS-573/CS-583); gross power for that 3116T turbo rating is commonly listed around 114 kW (153 hp), net around 108 kW (145 hp), but a CS-573C-specific spec sheet confirming that exact figure was not found -- treat the number as representative of the shared engine platform rather than a confirmed CS-573C datasheet value, and confirm with a Cat dealer if precision matters. The C-series line was later replaced by the E-series (CS-573E, serial prefixes ASZ/ASY), which switched to the 3056E engine -- this is directly documented, so 6LN units predate that changeover. Exact production year span and plant/region are not documented in available sources -- confirm with a Cat dealer using the full PIN. |
Frequently asked questions
What engine does the Caterpillar CS-573C use?
The CS-573C is powered by a Caterpillar 3116 turbocharged diesel inline-six, the same engine family used across the related CS-531C, CS-533C, CS-563C, and CS-583C compactors of that generation.
What is the operating weight of the Caterpillar CS-573C?
Operating weight runs roughly 13.2-13.6 t (29,000-30,000 lb). The exact figure varies by configuration - ROPS/FOPS cab, ballast, and smooth-drum versus padfoot drum all shift the number, so confirm against the specific machine.
What replaced the Caterpillar CS-573C?
The CS-573C was followed by the CS-573D and then the electronically controlled CS-573E. Caterpillar later folded this size class into its renumbered single-drum soil compactor lineup.
What CS-573C owners discuss
What engine powers the CS-573C, and how does it hold up long-term?
Service documentation tied to the CS-573C's 6LN-prefix serial range confirms the 3116 diesel as the power unit — a 6.6 L (402 cu in) mechanically-injected inline-six with a cast-iron block and dry cylinder liners. Owners generally rate the bottom end as strong and long-lived. The recurring complaint sits at the injector cups: cup failure lets combustion gases and coolant cross-contaminate, and it regularly gets misdiagnosed in the field as a blown head gasket or a ring/blow-by problem before a tech pulls the injectors and finds the real cause. Injector sleeve corrosion is the companion issue — sleeves need a dedicated puller and precise seating, or the replacement injector leaks again within a season. Because the block uses dry sleeves, any liner failure means a full bore-and-sleeve job, not a quick swap.
How do mechanics check compression or diagnose smoke on the 3116 in this machine?
Field consensus is that the 3116 has no published compression spec and no factory adapter to run a standard test, so a straight compression check is not how this engine gets diagnosed. Techs instead run a blow-by test with a Cat blow-by meter per Cat's own special-instruction procedure to judge ring and liner condition. Exhaust smoke color remains the quick field read: black points to an air/fuel imbalance (dirty filter, boost or injection issue), white points to low compression, excess fuel, or coolant reaching a cylinder, and blue means the engine is burning oil, most often past worn rings or valve guides. Persistent white or blue smoke is treated as a teardown flag, not a filter-change fix.
What's the typical failure pattern in the drum vibratory system?
Owners and techs trace a weak or dropped-out vibrator to a short list of causes. Worn or damaged weight-shaft bearings restrict oil flow through the system — this shows up as low vibrations-per-minute along with elevated oil pressure from the added mechanical friction. The other classic failure is a sheared splined coupling or drive shaft inside the drum: the vibratory motor keeps spinning but never turns the eccentric weight, so the machine sounds normal but stops compacting. On dual-amplitude drums, the eccentric-weight design is built to keep contamination out of the weight-shaft bearing lubricant, so a lube leak or low level at that housing is the first thing to rule out before condemning the motor or pump.
What electrical or switch issues show up most often?
This generation predates electronic engine controls, so reported electrical faults tend to be simple ones rather than sensor or module failures: a blown fuse or tired relay in the vibrate circuit, corrosion at wiring harness connector pins, and loose connections at the console or joystick that make vibration cut in and out intermittently instead of failing outright. The neutral-start/seat safety interlock is also a common culprit when the machine won't engage propel or vibration at all — a maladjusted or failed seat switch is reported more often than an actual wiring fault. Because interlocks are safety devices, have your dealer verify interlock and seat-switch function after any repair rather than bypassing them.
What wear patterns show up on the frame, drum, and running gear?
Single-drum compactors in this class — smooth steel drum forward, rubber-tired rear axle, articulated frame — concentrate wear at a few points. The center articulation joint (pin and bushings) is the big one: it needs greasing at every shift or two, and any noticeable front-to-back flex under load signals the joint is already worn. Owners flag it as the single most expensive repair on this type of machine short of the engine. Drum isolators, the rubber mounts separating the vibrating drum from the frame, crack or shear with age and let vibration transmit straight into the frame and cab, accelerating wear on gauges, switches, and operator comfort alike. Rear tire wear and a scarred or pitted drum shell round out the usual inspection points.
Is a CS-573C the same machine as a "573C" listed elsewhere in Cat's lineup?
No, and this naming collision trips people up. Cat also built a 573C as the largest machine in its C-series wheel feller buncher lineup — a forestry machine on a completely different chassis with a different engine family. It is also worth separating the CS-573C soil compactor from the later CS-573E: the C-series compactor documentation ties to a 6LN-prefix serial range and the 3116 engine, while E-series machines carry a different engine and electrical architecture. Parts, wiring diagrams, and service literature are not interchangeable across these three "573" families. Confirm the full serial prefix before ordering a manual or parts.
What should you check before buying a used CS-573C?
Start with the serial prefix to confirm you are actually looking at the C-series compactor rather than an E-series machine or a mis-tagged listing, and match any documentation to that prefix. On the machine: check the articulation joint for excessive play and ask for a greasing/service history, inspect the drum isolators for cracking, and look over the drum shell for pitting or scarring that would carry through as a poor finish on the mat. Run the vibration system through both amplitude settings and confirm it engages evenly side to side. On the engine, remember a standard compression test is not valid on the 3116 — ask for a blow-by check and note smoke color under load, and get the injector cup/sleeve service history since that's the recurring failure point. Because vibration engagement and propel interlocks are safety systems, have your dealer verify switch and interlock function, and confirm hydraulic system integrity, before putting the machine back to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CS-573C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.