Caterpillarpaving compactorvibratory compactor
Caterpillar CS-563C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CS-563C is a single-drum vibratory soil compactor, an articulated frame-steer machine built for embankment, subgrade and landfill compaction rather than asphalt paving. C-series machines run the Cat 3116T, a turbocharged inline-six diesel rated around 145 hp (108 kW) gross with mechanical unit injection and no engine ECM. Operating weight runs roughly 11.2 to 11.7 tonnes (24,700 to 25,700 lb) depending on drum shell (smooth CS-563C or padfoot CP-563C) and cab type (open ROPS canopy or enclosed cab). Cat built the C-series from about 1995 to 2000 under PIN prefix 4KN, following the earlier naturally aspirated CS-563 (1YJ prefix) and ahead of the CS-563D that took over the line afterward.
The main change from the base CS-563 to the C-series was the switch to a turbocharged 3116T, which lifted output without altering the machine's signature dual-pump propel driveline: one pump drives the rear axle, a second drives the front drum motor, giving independent control of wheel and drum traction on grade. Later D- and E-series compactors moved to electronically controlled engines and updated vibratory systems, which makes the C-series the last fully mechanical version of this platform: no ECM, no aftertreatment, dash lamps instead of fault codes. That simplicity keeps it in demand with buyers who want fewer electronic failure points, though used units are now aging into their third decade, so axle, drum planetary and vibratory-housing wear parts are worth checking closely before purchase.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CS-563C specifications
Engine
| Engine model | Caterpillar 3116T turbocharged diesel, inline 6-cylinder, 105 mm bore x 127 mm stroke, 6.6 L (403 cu in) displacement |
| Gross power | 108 kW (145 hp) at 2200 rpm; earlier CS-563 series factory literature states 115.5 kW for the same 145 hp rating — kW figure varies by source, the 145 hp rating is consistent |
| Net power | Not published independently for this model |
| Cylinders | 6 |
| Emissions tier | Not published for this model/era; predates current off-highway emissions tier labeling — confirm with dealer for exact serial/build range |
Weights
| Operating weight (standard) | 11,215 kg (24,725 lb); earlier CS-563 series literature cites 11,130 kg (24,500 lb) — varies by series/production year |
| Shipping weight | Approx 10,900 kg (24,000 lb) per CS-563 series factory literature — not confirmed for the C-specific build, verify with dealer |
| Weight on drum | Approx 5,950 kg (13,073 lb), per CS-563 series factory literature |
| Static/dynamic linear load (ground pressure) | 28 kg/cm static, 106 kg/cm dynamic (155 / 595 lb/in), per CS-563 series factory literature — class-typical figure, confirm for exact C-series build |
Dimensions
| Overall length | 5400 mm (17'9"); earlier CS-563 series literature cites 5258 mm (17'3") — varies by series |
| Overall width | 2438 mm (8'0") |
| Overall height | Approx 2997 mm (9'10"), per CS-563 series factory literature |
| Wheelbase | Approx 2740 mm (9'0") |
| Drum width | 2130 mm (83.9 in / 7'0") |
| Drum diameter | 1520 mm (59.9 in / 60 in) |
| Ground clearance | 483 mm (19 in) |
| Axle/tread width | 1675 mm (5'6"), per CS-563 series factory literature |
Performance
| Travel speed | Two-range hydrostatic drive: 0-6.4 km/h (4.0 mph) low range, 0-12.8 km/h (8.0 mph) high range |
| Vibration frequency | 23.3 Hz (1400 vpm) low to 30 Hz (1800 vpm) high, independent of engine rpm |
| Amplitude | 1.70 mm (.067 in) high, 1.19 mm (.047 in) low, per CS-563 series factory literature |
| Centrifugal force | 107 kN (24,060 lbf) high / 53.5 kN (12,030 lbf) low; earlier CS-563 series factory literature cites a notably higher range (up to 222 kN / 50,000 lbf max, 156 kN / 35,000 lbf min) — figures vary by series/source, verify against the exact machine |
| Gross gradeability | 47% (calculated rating under ideal conditions), per CS-563 series factory literature |
| Minimum turning radius | 3800 mm (12'6") inside drum edge, 6170 mm (20'3") outside drum edge; steering angle 30 degrees each direction, per CS-563 series factory literature |
Service capacities (summary)
| Fuel tank | 220 L (58.2 gal); earlier CS-563 series factory literature cites 254 L (67 gal) — varies by series |
| Hydraulic system | 110 L (29.1 gal); earlier CS-563 series factory literature cites 132 L (35 gal) — varies by series |
| Engine oil (crankcase) | 20 L (5.3 gal); earlier CS-563 series factory literature cites 15.1 L (4 gal) — varies by series |
| Cooling system | 38 L (10 gal) per CS-563 series factory literature — not confirmed for the C-specific build, verify with dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CS-563C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3116T turbocharged diesel | 20 L (5.3 US gal) | Cat DEO (Diesel Engine Oil). Grade selected by ambient temperature per Cat's standard multigrade chart: lighter grades such as SAE 10W-30 for cold-climate starts, heavier SAE 15W-40 or straight SAE 30 for warm/hot climates. |
| Cooling system | approx. 33.1 L (8.7 US gal) — single-sourced, confirm before ordering | Cat DEAC (Diesel Engine Antifreeze/Coolant) or Cat ELC (Extended Life Coolant), mixed to full-strength or 50/50 concentration for freeze protection to roughly -37°C (-34°F). |
| Fuel tank | 220 L (58.2 US gal) | No. 2-D diesel fuel; switch to a No. 1-D winter blend or treated No. 2-D below about -7°C (20°F) for cold-weather starting, per Cat's standard fuel guidance. |
| Hydraulic system (tank) | 110 L (29.1 US gal) | Cat TDTO (Transmission/Drivetrain Oil) — the propel/hydraulic circuit on this hydrostatic-drive compactor is factory-filled with drivetrain oil rather than a dedicated hydraulic-only fluid. SAE 10W for cold-climate operation up to SAE 30/SAE 50 in warm climates. |
| Rear axle & wheel final drives (NoSPIN differential + planetary reduction, combined) | approx. 27 L (7.1 US gal) — single-sourced, confirm before ordering | Cat TDTO, same ambient-temperature grade selection as the hydraulic/propel circuit. |
| Drum final drive (hydrostatic drive gear case) | approx. 3.2 L (0.85 US gal) — single-sourced, confirm before ordering | Cat TDTO. |
| Vibratory eccentric weight housing (bearing lube) | approx. 55 L (14.5 US gal) | Cat Compactor Oil (ISO VG 220) or equivalent EP gear lube where Cat Compactor Oil is not stocked. |
| Vibratory support bearing (minor lube point) | approx. 0.85 L (0.22 US gal) — single-sourced, confirm before ordering | Same EP gear lube spec as the eccentric weight housing. |
| Grease points (articulation joints, drum bearings, pivot pins) | spec only — no bulk fill volume, per standard grease-gun service intervals | Cat Multipurpose Grease (Cat MPGM), NLGI 2. Use Cat Advanced 3Moly or equivalent extreme-pressure grease at heavily loaded articulation/pivot points if specified by the dealer service chart. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CS-563C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the CS-563C beyond the schedule
Predictive Maintenance & Fluid Analysis
The 3116T runs mechanical unit injection with no ECM, so there are no fault codes to read. Rely on Scheduled Oil Sampling for engine, hydraulic, rear axle and vibratory (eccentric weight housing) oil instead of dash warnings. The dual-pump propel circuit feeds both the rear axle motor and the front drum drive motor from one hydraulic reservoir, so a single contamination event shows up in both circuits. Pull hydraulic samples at every oil change and watch the magnetic drain plugs for steel fines that signal early planetary or bearing wear.
Corrective & Common Repairs
Common failures trace to the dual-pump propel driveline: a weak or overpressured propel pump shows up as sluggish travel, sometimes blowing the pressure-test port, and a locked drum final-drive planetary stops the machine in both directions. Drum bearings that bind cause the same symptom, so check the magnetic drain plug for metal before opening the planetary. On the engine side, boost leaks or shaft play in the 3116T turbocharger and drift in the mechanical injection pump are the usual causes of smoke or rough running, since there is no ECM to flag a code.
Overhaul & Rebuild Points
High-hour rebuild points center on the vibratory eccentric weight housing, where bearings and seals wear from constant shock load, plus the drum shell bearing housings and the final-drive planetary gear sets in both the rear axle and the drum. The articulation hitch pin and bushings carry the full steering load on this frame-steer chassis and loosen over time, showing up as wander on grade. Turbocharger cores and the mechanical injection pump are common exchange items once compression and fuel delivery fall off, and propel pump cores are worth rebuilding rather than replacing outright given parts scarcity on this generation.
Seasonal & Environment Servicing
Cold starts on the mechanical 3116T rely on ether or glow-assist rather than any ECM-managed strategy, so check starting-aid function before winter and keep coolant at full freeze protection. Mechanical injection pumps are unforgiving of fuel gelling, so switch to a winter blend or anti-gel additive early in cold regions. On hot, dusty jobsites, shorten the air filter and radiator/oil cooler core cleaning interval, and wash caked soil off the drum shell and scrapers regularly so vibration amplitude and drum-to-ground contact stay consistent.
CS-563C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2500 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CS-563C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure Warning Lamp (with buzzer) | Engine oil pressure has dropped below the safe minimum. | Low oil level, worn oil pump, clogged oil filter, or a failed oil pressure sending unit/switch. | Shut the engine down immediately, check oil level and condition, then test the sending unit and oil pressure before restarting. |
| Engine Coolant Temperature Warning Lamp (with buzzer) | Engine coolant temperature has risen above the safe operating range. | Low coolant level, blocked radiator core, slipping or broken fan belt, or a stuck thermostat. | Stop the machine and shut down or let it idle cool, then check coolant level, belt condition, and radiator for debris. |
| Alternator/Charging System Warning Lamp | Charging system output is below battery voltage; the battery is not being charged. | Failed or slipping alternator drive belt, worn brushes/regulator in the alternator, or a loose or corroded battery/ground connection. | Check belt tension first, then test alternator output at the battery terminals and inspect wiring connections. |
| Propulsion Lockout - dash warning lamp and buzzer, machine will not move forward or reverse | The drive interlock circuit has detected a condition that blocks the propel function as a safety measure. | Parking brake switch not releasing, operator-seat interlock switch misaligned or faulty, or the forward-neutral-reverse control switch out of adjustment. | Confirm the parking brake fully releases and the seat switch is seated, check F-N-R switch alignment and wiring, then inspect the propel pilot pressure circuit. |
| Air Cleaner Restriction Indicator | Intake air restriction across the air filter element has reached the service limit. | Clogged or dirty primary air filter element, or a collapsed/damaged filter. | Inspect and clean or replace the primary (and secondary, if fitted) air filter element, then reset the restriction indicator. |
| Hydraulic Oil Temperature Warning Lamp/Gauge in red range | Hydraulic system fluid temperature has exceeded the normal operating range. | Low hydraulic fluid level, plugged or fouled oil cooler, failed cooler fan, or sustained high-load operation. | Stop and let the system cool, check fluid level and cooler fins for debris, and confirm the cooler fan turns freely. |
| Parking Brake Indicator Lamp (stays on / will not release) | Parking brake is not fully releasing when commanded. | Low pilot/release pressure at the brake, a stuck brake release solenoid, or a faulty brake pressure switch. | Check park-brake release pressure at the test port and inspect the release solenoid and switch; do not tow with the brake mechanically released unless required. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CS-563C attachments & work tools
Machine class and drum type
CS-563C is a single-drum vibratory soil compactor with a smooth steel drum, roughly 11.2 t operating class, sold alongside the CP-563C padfoot version on the same base platform. Despite being catalogued under "paving compactor," factory literature treats it as a soil/embankment roller, not a dual-drum asphalt roller.
Drum shell kit conversion (smooth to padfoot)
A bolt-on padfoot shell kit converts the CS-563C smooth drum to CP-563C-style padfoot configuration for clay and cohesive-soil compaction, and a smooth shell kit reverses it. Kits consist of curved steel shell segments and pad tips that bolt directly to the drum shell using the drum's existing mounting flange; no quick-coupler is used.
Drum width and diameter class
Drum width is about 2130 mm (83.9 in) and drum diameter about 1520 mm (59.9 in) on this size class, common to both the smooth (CS) and padfoot (CP) 563C variants. These dimensions size any replacement shell, scraper, or edge kit fitted to the machine.
Vibratory exciter (high/low amplitude selection)
The drum exciter offers a dual amplitude/centrifugal-force setting selectable from the operator station, roughly 107 kN high force and 53 kN low force at about 30 Hz nominal frequency (values vary slightly by source and by series revision). This is a built-in hydraulic/mechanical arrangement rather than a bolt-on attachment, and no separate hydraulic kit is needed to use it.
Drum scraper bar
A drum-width scraper bar is fitted ahead of/behind the drum as standard equipment to keep the shell clean of soil and clay buildup, adjustable against the drum face. This is standard rather than optional on this class of soil compactor.
ROPS/FOPS operator protection
Standard protection is a two-post ROPS/FOPS overhead canopy that bolts to frame-integral mounting flanges, with handrails and foot rests for grade work. An enclosed, weather-protected ROPS/FOPS cab option existed on this platform for operators needing full weather protection, though canopy remained the more common factory configuration on the C-series.
Tire and axle configuration
The rear axle runs on 23.1x26, 8-ply-rated tires as the documented factory fitment for this size class; ply rating and tread pattern can vary by application (soil vs. rock-strewn sites).
Rubber/urethane pad drum liners (aftermarket)
Rubber roller-drum pad liners are sold in the aftermarket to fit the CP-563/CP-563C padfoot drum, intended to reduce shock and surface marking on partially cured or sensitive base material. These are not confirmed as a Cat factory-catalogued work tool for this model; verify fitment and sourcing with a dealer before ordering.
All CS-563C assemblies by section
Every catalogued assembly group for the Caterpillar CS-563C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
117-2884 Air Cleaner Gp
| 07***26 | Clamp | 3 |
| 11***20 | Tube | 1 |
| 11***84 | Air Cleaner Group | 1 |
6i-2551 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***51 | Air Cleaner Group | 1 |
140-1690 Air Cleaner Gp
| 12***46 | Precleaner Group | 1 |
| 14***90 | Air Cleaner Group | 1 |
| 14***05 | Bracket | 1 |
143-9753 Air Cleaner Gp
| 12***46 | Precleaner Group | 1 |
| 14***05 | Bracket | 1 |
| 14***53 | Air Cleaner Group | 1 |
1n-4877 Cover Gp-Inlet Manifold
| 1N***77 | Cover Group-Inlet Manifold | 1 |
| 4W***22 | Cover-Inlet Manifold | 1 |
| 6V***19 | Bolt; (M8x1.25x40-mm) | 20 |
1w-6029 Lines Gp-Air
| 1W***29 | Lines Group-Air | 1 |
| 7C***07 | Elbow | 1 |
| 7C***19 | Hose | 2 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
124-8533 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***40 | Pipe-Exhaust | 1 |
117-2882 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***40 | Pipe-Exhaust | 1 |
141-4965 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 12***34 | Muffler | 1 |
| 14***64 | Tube-Exhaust | 1 |
140-1695 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***22 | Bracket | 1 |
117-2881 Muffler Gp
| 10***75 | Pipe-Exhaust | 1 |
| 10***78 | Bar-Support | 1 |
| 11***40 | Pipe-Exhaust | 1 |
4m-0310 Precleaner Gp
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
| 4M***10 | Precleaner As | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 1M***50 | Bowl | 1 |
| 9M***39 | Cover Assem. | 1 |
4p-2120 Turbocharger Gp
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 4P***20 | Turbocharger Group | 1 |
| 4P***84 | Turbocharger Group | 1 |
4p-4684 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***84 | Turbocharger Group | 1 |
| 4P***86 | Cartridge Group-Turbocharger | 1 |
4p-4682 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***82 | Turbocharger Group | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
135-6635 Turbocharger Gp
| 10***64 | Cartridge Group-Turbocharger | 1 |
| 11***59 | Housing; (Turbine) | 1 |
| 12***39 | Housing (Compressor) | 1 |
141-8274 Turbocharger Gp
| 13***35 | Turbocharger Group | 1 |
| 14***74 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
2w-9608 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2W***08 | Camshaft Group-Single | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
7e-2986 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
7c-0299 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
7c-5826 Cylinder Block Gp
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2W***11 | Bearing-Sleeve; (Camshaft) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
2w-9746 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 2W***46 | Cylinder Block Group | 1 |
100-4948 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
115-4108 Cylinder Head As
| 11***07 | Cylinder Head As | 1 |
| 11***08 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 12 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
140-7373 Cylinder Head As
| 11***36 | Seal-Valve Stem | 12 |
| 14***73 | Cylinder Head As | 1 |
| 19***66 | Cylinder Head As | 1 |
119-3065 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 11***65 | Cylinder Head As | 1 |
| 12***53 | Insert-Valve Seat; (Inlet) | 6 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
4p-8264 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
4p-8263 Cylinder Head Gp
| 11***80 | Valve-Inlet | 6 |
| 11***36 | Seal-Valve Stem | 12 |
| 11***65 | Cylinder Head As | 1 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
115-4165 Cylinder Head Gp
| 10***79 | Valve-Exhaust | 6 |
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
136-8877 Drain Gp-Engine Oil
| 13***77 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
7e-8945 Drive Gp-Accessory
| 13***19 | Seal-Integral; (Integral) | 1 |
| 3G***97 | Seal-Lip Type | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
9y-0608 Drive Gp-Accessory
| 13***19 | Seal-Integral; (Integral) | 1 |
| 7C***89 | Adapter | 1 |
| 9H***72 | Gasket | 1 |
158-2203 Drive Gp-Accessory
| 10***69 | Adapter | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 15***03 | Drive Group-Accessory | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
124-8917 Drive Gp-Pump
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 11***76 | Plate-Adapter | 1 |
| 12***17 | Drive Group-Pump | 1 |
112-4722 Drive Gp-Pump
| 07***28 | Plate-Drive; (Drive) | 1 |
| 09***88 | Adapter-Pump | 1 |
| 11***22 | Drive Group-Pump | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***14 | Bearing As-Ball | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
115-4175 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***71 | Shaft | 1 |
| 11***72 | Bearing | 1 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
116-7494 Mounting Gp-Engine Flexible
| 10***04 | Mount As | 1 |
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 7X***53 | Bolt-Plt; (5/8unc X 4 1/4) | 2 |
4w-0269 Pan Gp-Oil
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
115-4084 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 11***84 | Piston & Rod Group | 1 |
108-5758 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 10***58 | Piston & Rod Group | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
| 10***22 | Rocker Arm Group-Valve | 1 |
4w-1016 Seal Gp-Crankshaft
| 4W***16 | Seal Group-Crankshaft | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
| 7C***63 | Seal Group-Crankshaft; (Front)(Front) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***09 | Seal Group-Crankshaft | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
| 11***21 | Seal Group-Crankshaft; (Front) | 1 |
2w-9607 Valve Mechanism Gp
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Braking System
109-2973 Control Gp-Service Brake
| 10***26 | Hose As | 1 |
| 10***79 | Hose As | 1 |
| 10***73 | Control Group-Service Brake | 1 |
106-9047 Lines Gp-Service Brake
| 08***35 | Tee | 1 |
| 10***55 | Hose As | 1 |
| 10***47 | Lines Group-Brake | 1 |
119-0546 Lines Gp-Service Brake
| 11***80 | Hose As | 1 |
| 11***81 | Hose As | 1 |
| 11***83 | Adapter | 1 |
118-3782 Lines Gp-Service Brake
| 08***35 | Tee | 1 |
| 11***24 | Hose As | 1 |
| 11***91 | Hose As | 1 |
147-2806 Lines Gp-Service Brake
| 11***80 | Hose As | 1 |
| 11***81 | Hose As | 1 |
| 14***36 | Hose As | 1 |
147-2805 Lines Gp-Service Brake
| 08***35 | Tee | 1 |
| 11***24 | Hose As | 1 |
| 11***91 | Hose As | 1 |
115-8488 Pump Gp-Hand
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
| 11***20 | Pump | 1 |
| 11***21 | Valve-Check | 2 |
1g-9630 Valve & Mtg Gp-Brake & Shift
| 1G***30 | Valve & Mtg Group-Brake & Shift | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
107-1107 Valve & Mtg Gp-Brake & Shift
| 10***07 | Valve & Mtg Group-Brake & Shift | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
124-8942 Valve & Mtg Gp-Brake & Shift
| 12***42 | Valve & Mtg Group-Brake & Shift | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
1g-9759 Valve Gp-Brake & Shift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1G***76 | Valve Group-Check; (Brake Control) | 1 |
| 1G***78 | Locknut | 1 |
Cooling System
7c-5467 Adapter Gp-Fan
| 6I***37 | Adapter; (Fan) | 1 |
| 7C***67 | Adapter Group-Fan | 1 |
| 8T***77 | Bolt-Plt; (M8 X 1.25 X 90) | 6 |
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 18***95 | Core As-Engine Oil Cooler | 1 |
| 7C***60 | Gasket | 1 |
4w-2913 Cooler Gp-Engine Oil
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 4W***13 | Cooler Group-Engine Oil | 1 |
| 5P***96 | Plug; (Straight Thread O-Ring) | 1 |
125-7863 Fan Gp-Blower
| 08***85 | Guard As-Fan | 2 |
| 12***78 | Fan-Blower | 1 |
| 12***63 | Fan Group-Blower | 1 |
117-2883 Fan Gp-Blower
| 08***85 | Guard As-Fan | 1 |
| 11***83 | Fan Group-Blower | 1 |
| 1F***50 | Nut Rops Support | 1 |
4w-6620 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 19***39 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
116-7496 Radiator & Hyd Oil Cooler Gp
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 08***98 | Valve, Drain R/6b***63; (Radiator) | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
117-2885 Alternator Gp-Charging
| 11***85 | Alternator Group-Charging | 1 |
| 14***93 | Spacer | 1 |
| 3P***11 | Spacer (11.13mm Thk); (11.13-mm Thk) | 1 |
118-6506 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 2 |
| 11***28 | Cable Assem. | 1 |
| 11***06 | Battery & Wiring Group | 1 |
1g-5981 Control Gp-Pump Electronic
| 03***05 | Seal-O-Ring | 1 |
| 10***37 | Gasket | 1 |
| 10***38 | Cover | 1 |
111-9383 Control Gp-Pump Electronic
| 11***83 | Control Group-Pump Electronic | 1 |
| 1G***81 | Control Group-Pump Electronic | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
114-7143 Converter Gp-Electrical
| 11***43 | Converter | 1 |
| 11***44 | Plate Assem. | 2 |
| 11***43 | Converter Group-Electrical | 1 |
125-2645 Electrical Ar
| 11***06 | Battery & Wiring Group | 1 |
| 12***45 | Electrical Ar | 1 |
| 12***60 | Wiring Group-Machine | 1 |
116-2614 Electrical Ar
| 11***14 | Electrical Ar | 1 |
| 11***35 | Wiring Group-Engine | 1 |
| 11***06 | Battery & Wiring Group | 1 |
160-3782 Electrical Ar
| 11***06 | Battery & Wiring Group | 1 |
| 12***60 | Wiring Group-Machine | 1 |
| 14***99 | Wiring Group-Engine | 1 |
117-2880 Interlock Gp-Vibr & Throttle
| 10***11 | Switch As-Roller | 1 |
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
140-1738 Interlock Gp-Vibr & Throttle
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
| 12***65 | Switch As-Roller; (Bucket Kickout & Positioner)) | 1 |
9x-1439 Lamp Gp-Flood -Vertical
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***39 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 9X***55 | Body As-Lamp | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
117-8319 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***19 | Lamp Group-Registration Plate; -Eu | 1 |
| 13***49 | Screw-Lens | 2 |
121-5904 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***50 | Lamp; (Front, Rh)(Running/Turn Signal) | 1 |
121-2547 Lamp Gp-Signal
| 08***42 | Lamp Group; (Signal-Front) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***47 | Lamp Group-Signal | 1 |
3e-6466 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
127-1558 Lamp Gp-Signal
| 12***05 | Harness As-Lighting; (Signal) | 1 |
| 12***58 | Lamp Group-Signal | 1 |
| 12***59 | Lamp; (Running Lt, Stop, Turn Sig, Rh) | 1 |
127-1561 Lamp Gp-Signal
| 12***06 | Harness As-Lighting; (Signal) | 1 |
| 12***60 | Lamp; (Running Lt, Stop, Turn Sig, Lh) | 1 |
| 12***61 | Lamp Group-Signal | 1 |
121-5903 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Lamp; (Front, Lh)(Running/Turn Signal) | 1 |
146-8387 Lamp Gp-Warning Beacon
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
| 14***87 | Lamp Group-Warning Beacon | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
121-4058 Lighting Gp-Cab
| 12***58 | Lighting Group-Cab | 1 |
| 1A***21 | Grommet | 2 |
| 2H***20 | Lockwasher (11.38mm Id) | 2 |
120-3996 Lighting Gp-Flood
| 12***96 | Lighting Group-Flood | 1 |
| 12***98 | Harness As-Wiring | 1 |
| 12***56 | Bracket-Guard | 2 |
126-3628 Lighting Gp-Roading
| 08***55 | Nut | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
132-8245 Lighting Gp-Roading
| 12***28 | Lighting Group-Roading | 1 |
| 13***07 | Plate As-Rh | 1 |
| 13***08 | Plate As-Lh | 1 |
152-8120 Lighting Gp-Roading
| 08***55 | Nut | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***80 | Boss | 8 |
128-6557 Lighting Gp-Signal
| 10***80 | Boss | 8 |
| 12***06 | Mount As | 2 |
| 12***47 | Lamp Group-Signal | 2 |
175-7459 Lighting Gp-Warning
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 17***59 | Lighting Group-Warning | 1 |
081-4135 Regulator Gp-Voltage
| 08***02 | Washer | 1 |
| 08***01 | Screw | 1 |
| 08***44 | Rotary Eccentric Relay | 1 |
120-3885 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***85 | Sensor Group | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
7c-4028 Solenoid Gp-Shutoff
| 15***52 | Solenoid As; (Fuel Shutoff) | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
121-6812 Starting Aid Gp
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
102-8823 Starting Aid Gp
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 10***23 | Starting Aid Group; (Heater) | 1 |
140-2379 Starting Aid Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***66 | Wire As | 1 |
121-6814 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***14 | Starting Aid Group-Ether | 1 |
| 12***46 | Tube As | 1 |
106-8557 Starting Motor Gp-Electric
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 3 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
108-3858 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
6v-5720 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
104-7040 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
207-1511 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
9g-7641 Switch Gp-Start
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
129-2808 Switch Gp-Vibratory
| 03***32 | Board As-Terminal | 1 |
| 05***02 | Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
118-6508 Warning Gp-Backup
| 11***08 | Warning Group-Backup | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
129-1551 Warning Gp-Backup
| 12***77 | Bracket | 1 |
| 12***51 | Warning Group-Backup | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 2 |
159-3859 Wiring Gp-Air Conditioner
| 15***08 | Plate | 1 |
| 15***09 | Plate | 1 |
| 15***17 | Button | 2 |
122-7091 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***35 | Console Group-Operator | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 14 |
114-8619 Wiring Gp-Cab
| 11***19 | Wire As | 1 |
| 11***20 | Wire As | 2 |
| 11***21 | Harness As | 1 |
140-1699 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***11 | Switch As-Pressure; (Engine Oil) | 1 |
118-2435 Wiring Gp-Engine
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***11 | Switch As-Pressure; (Engine Oil) | 1 |
| 11***13 | Harness As-Power | 1 |
125-4461 Wiring Gp-Engine
| 05***02 | Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
118-6507 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 11***07 | Wiring Group-Machine | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
125-4460 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 12***60 | Wiring Group-Machine | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
118-3462 Wiring Gp-Platform
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
125-6726 Wiring Gp-Platform
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
141-6642 Wiring Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***73 | Harness As-Steering | 1 |
Engine Arrangement
111-7718 Engine Ar
| 10***32 | Pump Group-Fuel Injection | 6 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***18 | Engine Ar | 1 |
147-5459 Engine Ar
| 13***48 | Engine Ar | 1 |
| 14***90 | Air Cleaner Group | 1 |
| 14***99 | Wiring Group-Engine | 1 |
133-4248 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
154-4090 Engine Ar
| 13***48 | Engine Ar | 1 |
| 15***90 | Engine Ar | 1 |
118-6591 Installation Ar-Engine
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***80 | Interlock Group-Vibr & Throttle | 1 |
140-9649 Installation Ar-Engine
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***82 | Muffler Group | 1 |
125-2643 Installation Ar-Engine
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 11***80 | Interlock Group-Vibr & Throttle | 1 |
Frame And Body
1g-4151 Block Gp
| 08***70 | Washer; (Cb524) | 4 |
| 1G***49 | Block | 1 |
| 1G***50 | Support-Block | 1 |
119-0539 Bumper Gp-Drum
| 11***39 | Bumper Group-Drum | 1 |
| 11***40 | Scraper Group-Padded Drum | 1 |
| 1G***05 | Washer; (10-mm Thk) | 8 |
115-4905 Bumper Gp-Drum
| 11***53 | Support As | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 1G***05 | Washer; (10-mm Thk) | 8 |
119-9227 Counterweight Gp
| 11***27 | Counterweight Group | 1 |
| 11***07 | Film-Identification; (Cs-463c-Aw) | 2 |
| 12***01 | Yoke As | 1 |
123-9304 Door Gp-Access
| 06***44 | Grommet | 1 |
| 08***24 | Seal; (1.87-M Each) | 0 |
| 11***34 | Latch-Door | 1 |
123-9307 Door Gp-Access
| 06***44 | Grommet | 1 |
| 08***24 | Seal; (1.87-M Each) | 0 |
| 11***34 | Latch-Door | 1 |
124-7184 Door Gp-Radiator
| 08***24 | Seal; (1.87-M Each) | 0 |
| 12***84 | Door Group-Radiator | 1 |
| 12***85 | Door As; (Rear) | 1 |
144-0484 Enclosure Gp-Engine
| 06***44 | Grommet | 2 |
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
116-5278 Enclosure Gp-Engine
| 06***44 | Grommet | 2 |
| 11***36 | Angle | 2 |
| 11***76 | Panel-Hood | 1 |
112-5036 Fender Gp-Wide
| 11***78 | Fender; (Rh) | 1 |
| 11***80 | Fender; (Lh) | 1 |
| 11***36 | Fender Group-Wide | 1 |
142-6935 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 09***29 | Stud-Weld | 2 |
119-0543 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 10***24 | Plate | 1 |
122-0312 Guard Gp-Radiator
| 11***99 | Rod As; (Enclosure-Engine) | 1 |
| 12***12 | Guard Group-Radiator | 1 |
| 12***78 | Guard As-Radiator | 1 |
116-5280 Guard Gp-Radiator
| 11***66 | Grill As | 1 |
| 11***79 | Guard As-Radiator | 1 |
| 11***80 | Guard Group-Radiator | 1 |
123-3010 Guard Gp-Sound Suppression
| 09***91 | Pin - Spring | 4 |
| 12***05 | Insulation | 1 |
| 12***06 | Insulation | 1 |
087-0776 Guard Gp-Transmission
| 08***76 | Guard Group-Transmission; Guard Gp-Transmission | 1 |
| 3E***61 | Locknut; (5/8-11-Thd) | 4 |
| 7R***49 | Guard As | 1 |
115-4906 Scraper Ar-Drum
| 11***36 | Scraper Group-Drum; -Front | 1 |
| 11***37 | Scraper Group-Drum; -Rear | 1 |
| 11***06 | Scraper Ar-Drum | 1 |
114-9044 Scraper Gp-Smooth Drum
| 10***10 | Bolt-Carriage | 4 |
| 10***59 | Bracket | 4 |
| 11***44 | Scraper Group-Drum | 1 |
115-0537 Scraper Gp-Smooth Drum
| 10***10 | Bolt-Carriage | 5 |
| 10***60 | Bracket | 4 |
| 11***34 | Plate-Backing | 2 |
115-0536 Scraper Gp-Smooth Drum
| 10***10 | Bolt-Carriage | 5 |
| 10***59 | Bracket | 4 |
| 11***34 | Plate-Backing | 2 |
115-4054 Scraper Gp-Smooth Drum
| 10***10 | Bolt-Carriage | 4 |
| 11***69 | Bracket | 4 |
| 11***54 | Scraper Group-Drum | 1 |
119-0540 Scraper Gp-Padded Drum
| 07***32 | Tip | 18 |
| 07***33 | Pin-Flexible | 18 |
| 11***40 | Scraper Group-Padded Drum | 1 |
122-8038 Scraper Gp-Padded Drum
| 07***32 | Tip | 18 |
| 07***33 | Pin-Flexible | 18 |
| 10***94 | Scraper As-Blade | 1 |
086-9532 Scraper Gp-Padded Drum
| 07***32 | Tip | 9 |
| 07***33 | Pin-Flexible | 9 |
| 08***96 | Support-Hose | 2 |
154-2352 Scraper Gp-Smooth Drum
| 07***92 | Mount, Rubber Shock | 2 |
| 10***10 | Bolt-Carriage | 2 |
| 15***49 | Plate As | 2 |
124-8652 Suppression Ar-Sound
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
| 12***33 | Plate & Film Group | 1 |
124-8649 Suppression Ar-Sound
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
| 12***34 | Plate & Film Group | 1 |
124-8653 Suppression Ar-Sound
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
| 12***34 | Plate & Film Group | 1 |
124-4613 Suppression Ar-Sound
| 12***59 | Suppression Group-Sound | 1 |
| 12***76 | Suppression Group-Sound | 1 |
| 12***13 | Suppression Ar-Sound | 1 |
121-4659 Suppression Gp-Sound
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
124-2376 Suppression Gp-Sound
| 12***76 | Suppression Group-Sound | 1 |
| 12***92 | Angle As | 1 |
| 12***93 | Angle As | 1 |
162-2155 Suppression Gp-Sound
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
141-6630 Suppression Gp-Sound
| 11***36 | Angle | 2 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***02 | Base Group-Fuel Filter | 1 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
7w-6989 Control Gp-Fuel Injection
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
| 7W***89 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
183-4680 Control Gp-Governor
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 05***02 | Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
140-9008 Filter & Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***88 | Clamp; (Hose) | 2 |
| 10***89 | Hose As | 1 |
100-6179 Governor Gp-Unit Injector
| 10***79 | Governor Group-Unit Injector | 1 |
| 10***76 | Setscrew-Hex Head | 1 |
| 10***39 | Sleeve-Limiting | 1 |
131-4852 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
133-3960 Governor Gp-Unit Injector
| 10***91 | Spring-Oil Side | 1 |
| 10***89 | Cam As | 1 |
| 13***62 | Governor Group-Unit Injector | 1 |
133-3062 Governor Gp-Unit Injector
| 10***90 | Spring-Air Side | 1 |
| 10***92 | Spring-Servo | 1 |
| 10***93 | Spring-Return | 1 |
7e-7661 Governor Gp-Unit Injector
| 4P***12 | Governor Group-Unit Injector | 1 |
| 7E***61 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
4p-5512 Governor Gp-Unit Injector
| 10***79 | Governor Group-Unit Injector | 1 |
| 4P***58 | Spring-Low Idle | 1 |
| 4P***74 | Cam-Torque | 1 |
132-5238 Governor Gp-Unit Injector
| 13***38 | Governor Group-Unit Injector | 1 |
| 13***60 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
118-6505 Lines Gp-Fuel
| 10***68 | Adapter | 2 |
| 11***68 | Hose As | 1 |
| 11***05 | Lines Group-Fuel | 1 |
125-4459 Lines Gp-Fuel
| 10***68 | Adapter | 1 |
| 11***68 | Hose As | 1 |
| 12***59 | Lines Group-Fuel | 1 |
140-1693 Lines Gp-Fuel
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 10***68 | Adapter | 1 |
| 11***88 | Hose As | 1 |
6i-2420 Lines Gp-Fuel Filter
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***80 | Tube Assem. | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
8n-5251 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
117-2887 Pump Gp-Fuel Priming
| 11***87 | Pump Group-Fuel Priming | 1 |
| 11***20 | Bracket | 1 |
| 8N***51 | Pump Group-Fuel Prime & Prim Filter | 1 |
8n-3365 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
127-6449 Pump Gp-Fuel Prm & Water Sep
| 00***70 | Nipple-Strainer To Flange | 1 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***51 | Tank Group-Fuel | 1 |
102-9797 Tank & Mtg Gp-Fuel
| 00***70 | Nipple-Strainer To Flange | 1 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***97 | Tank & Mtg Group-Fuel | 1 |
124-8950 Tank & Mtg Gp-Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***50 | Tank & Mtg Group-Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
129-1101 Valve Gp-Check
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
Hydraulic System
176-8246 Actuator Gp-Pump
| 00***63 | Seal-O-Ring; (55.24mm Id) | 1 |
| 10***99 | Screw | 2 |
| 15***58 | Spring | 1 |
178-3886 Actuator Gp-Pump
| 00***63 | Seal-O-Ring; (55.24mm Id) | 1 |
| 10***99 | Screw | 2 |
| 11***31 | Seal-O-Ring | 1 |
087-1788 Cap & Strainer Gp-Hyd Oil Fill
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2J***61 | Ring-Retaining | 1 |
119-7219 Cylinder Gp-Hydraulic
| 11***19 | Cylinder Group-Hydraulic | 1 |
| 12***36 | Seal-Backup | 1 |
| 12***45 | Wiper-Rod | 1 |
7r-7638 Cylinder Gp-Hydraulic -Blade
| 07***86 | Lockwire | 1 |
| 08***05 | Seal | 1 |
| 08***80 | Kit-Seal; (Hydraulic Cylinder) | 1 |
109-6705 Cylinder Gp-Hydraulic
| 07***02 | Wire, Lock | 1 |
| 07***85 | Washer | 1 |
| 10***05 | Cylinder Group-Hydraulic | 1 |
1g-8877 Filter & Mtg Gp-Hydraulic
| 13***43 | Filter Group-Oil | 1 |
| 1G***77 | Filter & Mtg Group-Hydraulic | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
125-0650 Filter & Mtg Gp-Hydraulic
| 12***50 | Filter & Mtg Group-Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
125-0652 Filter & Mtg Gp-Hydraulic
| 12***52 | Filter & Mtg Group-Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
117-0576 Filter & Mtg Gp-Hydraulic
| 11***76 | Filter & Mtg Group-Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
122-1786 Filter Gp-Oil -Hydraulic
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
133-5343 Filter Gp-Oil
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
077-5200 Gauge Gp-Sight
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
177-0697 Head Gp-Pump -Piston And Gear Pump
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***28 | Screw | 2 |
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
125-2655 Hydraulic Ar-Auxiliary
| 10***77 | Lines Group-Cylinder | 1 |
| 11***20 | Cylinder & Mtg Group-Steering | 1 |
| 12***21 | Valve & Mtg Group-Bypass | 1 |
116-2632 Hydraulic Ar-Auxiliary
| 10***77 | Lines Group-Cylinder | 1 |
| 10***04 | Cylinder & Mtg Group-Steering | 1 |
| 11***32 | Hydraulic Ar-Auxiliary | 1 |
120-8130 Hydraulic Ar-Auxiliary
| 10***77 | Lines Group-Cylinder | 1 |
| 11***49 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***96 | Valve & Mtg Group-Manifold | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
128-1069 Kit-Pump Control
| 11***16 | Seal | 1 |
| 12***69 | Plug | 2 |
| 12***69 | Kit-Pump Control | 1 |
125-3514 Lines Gp-Auxiliary Hydraulic
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***36 | Hose As | 1 |
| 12***45 | Hose As | 1 |
117-0549 Lines Gp-Auxiliary Hydraulic
| 11***74 | Hose As | 1 |
| 11***49 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
130-0153 Lines Gp-Blade
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
| 11***59 | Hose As | 1 |
120-8675 Lines Gp-Blade
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
| 11***59 | Hose As | 2 |
125-0651 Lines Gp-Hydraulic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 12***39 | Hose As | 1 |
125-0649 Lines Gp-Hydraulic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 12***42 | Mounting Parts, Hose As | 1 |
117-2654 Lines Gp-Hydraulic Filter
| 10***59 | Hose As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***82 | Hose As | 1 |
117-4926 Lines Gp-Hydraulic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***78 | Hose As | 1 |
| 11***18 | Tee-Swivel | 1 |
124-9081 Lines Gp-Hydraulic Oil Cooler
| 11***05 | Hose As | 1 |
| 12***37 | Hose As | 1 |
| 12***80 | Plate | 1 |
117-3051 Lines Gp-Hydraulic Oil Cooler
| 11***66 | Hose As | 1 |
| 11***72 | Hose As | 2 |
| 11***51 | Lines Group-Hydraulic Oil Cooler | 1 |
136-8869 Motor Gp-Piston -Vibratory
| 10***35 | Cone-Bearing | 1 |
| 10***36 | Cup-Bearing | 1 |
| 10***13 | Bolt | 4 |
112-7188 Motor Gp-Piston
| 11***73 | Orifice | 1 |
| 11***88 | Motor Group-Piston | 1 |
| 12***69 | Shim; (4.05 mm) | 1 |
141-0977 Motor Gp-Piston
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 10***35 | Cone-Bearing | 1 |
| 10***36 | Cup-Bearing | 1 |
123-5259 Motor Gp-Piston -Propel, Drum
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
108-4090 Motor Gp-Piston
| 10***23 | Ring-Retaining | 2 |
| 10***24 | Shim; (0.3mm Thk) | 1 |
| 10***25 | Shim; (0.4mm Thk) | 1 |
123-5260 Motor Gp-Piston -Propel, Axle
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
108-4158 Motor Gp-Piston
| 10***58 | Motor Group-Vibratory | 1 |
| 11***21 | Plug-Special | 2 |
| 11***22 | Spring | 2 |
123-5263 Pump Gp-Gear
116-7497 Pump Gp-Gear
| 10***54 | Spring | 1 |
| 10***55 | Seal-Shaft | 1 |
| 10***58 | Kit-Seal; (Valve) | 1 |
147-2296 Pump Gp-Hydraulic
121-4879 Pump Gp-Piston
159-9453 Pump Gp-Piston
117-0438 Pump Gp-Piston
123-7316 Pump Gp-Piston
147-6188 Pump Gp-Piston
134-3843 Pump Gp-Piston
116-7498 Pump Gp-Piston
121-4880 Pump Gp-Piston
159-9454 Pump Gp-Piston
123-5262 Pump Gp-Piston
1g-9720 Pump Gp-Piston
7r-3708 Rotating Gp-Motor
137-4581 Rotating Gp-Motor -Propel
| 11***26 | Pin | 1 |
| 11***27 | Screw-Lock | 1 |
| 11***28 | Screw | 3 |
177-0251 Rotating Gp-Pump -Piston And Gear Pump
| 17***51 | Rotating Group-Pump; -Vibratory Piston Pump | 1 |
| 7R***15 | Kit-Rotary | 1 |
| 7R***16 | Kit-Shaft & Bearing | 1 |
319-6708 Rotating Gp-Pump
| 11***16 | Screw | 14 |
| 13***83 | Pin-Center | 1 |
| 13***84 | Piston | 7 |
117-2658 Tank & Mtg Gp-Hydraulic
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
125-0656 Tank & Mtg Gp-Hydraulic
| 00***70 | Nipple-Strainer To Flange | 1 |
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
124-8921 Valve & Mtg Gp-Bypass
| 11***75 | Valve-Bypass; (Hydraulic Oil Cooler) | 1 |
| 12***21 | Valve & Mtg Group-Bypass | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 3 |
117-2888 Valve & Mtg Gp-Bypass
| 00***70 | Nipple-Strainer To Flange | 1 |
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
122-1467 Valve & Mtg Gp-Control
| 12***67 | Valve & Mtg Group-Control | 1 |
| 12***85 | Valve Group-Bypass | 1 |
| 12***13 | Bracket As | 1 |
117-0696 Valve & Mtg Gp-Manifold
| 11***96 | Valve & Mtg Group-Manifold | 1 |
| 2N***80 | Screw-Head; (1/4-20x0.75-In) | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
7x-8382 Valve Gp-Control
| 11***28 | Manifold-Return | 1 |
| 11***21 | Bracket As | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 8 |
110-6396 Valve Gp-Flushing
| 11***96 | Valve Group-Flushing | 1 |
| 11***07 | Kit-Detent; (Valve Control) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
139-7747 Valve Gp-Flushing -Propel Motor
| 10***17 | Seal-O-Ring | 2 |
| 10***18 | Seal-O-Ring | 3 |
| 11***73 | Orifice | 1 |
135-1774 Valve Gp-Pump Control
| 11***16 | Orifice | 1 |
| 12***98 | Plug | 1 |
| 13***74 | Valve Group-Pump Control | 1 |
177-2335 Valve Gp-Pump Control
| 10***17 | Seal-O-Ring | 2 |
| 12***91 | Plug | 2 |
| 12***96 | Valve-Piston | 1 |
208-8003 Valve Gp-Pump Control
| 10***13 | Connector | 1 |
| 10***16 | Connector | 1 |
| 10***17 | Kit-Seal; (Includes Parts Marked J) | 0 |
112-4634 Valve Gp-Relief
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 11***16 | Seal | 1 |
| 12***84 | Seal-O-Ring | 1 |
126-4494 Valve Gp-Relief -Piston Pump
| 11***16 | Seal | 1 |
| 12***94 | Plug; (Break Off) | 2 |
| 12***94 | Valve Group-Relief; -Vibratory Piston Pump | 1 |
177-7122 Valve Gp-Relief
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
| 19***53 | Gasket | 1 |
| 19***45 | Bolt-Socket Head; (M6x1x45-mm) | 1 |
Implements
132-4535 Blade Ar
| 12***34 | Ring-Backup | 1 |
| 13***35 | Blade Ar | 1 |
| 17***25 | Pin-Threaded | 1 |
120-8674 Blade Ar
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
132-9697 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
131-2924 Blade Gp-Leveling
| 12***75 | Lines Group-Blade | 1 |
| 12***67 | Valve & Mtg Group-Control | 1 |
| 12***00 | Blade Group-Leveling | 1 |
122-1500 Blade Gp-Leveling
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 12***00 | Blade Group-Leveling | 1 |
132-4534 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 10***44 | Edge-Cutting | 2 |
| 10***45 | Edge-Cutting; (Mid-Section) | 1 |
Lubrication System
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
1n-3477 Breather Gp
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 6V***21 | Bolt; (M8x1.25mmx110mm) | 1 |
7e-3626 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 2 |
6i-4515 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6I***99 | Tube As | 1 |
| 6I***15 | Filler Group-Oil | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7c-0271 Filter Gp-Engine Oil
| 1R***58 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2P***37 | Stud Engine Oil Filter | 1 |
7w-8420 Fumes Disposal Gp
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
132-2792 Gauge Gp-Oil Level (Dipstick)
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 13***92 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
166-6543 Gauge Gp-Oil Level (Dipstick)
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 16***43 | Gauge Group-Oil Level (Dipstick) | 1 |
6i-2685 Gauge Gp-Oil Level (Dipstick)
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 2 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
117-2886 Lines Gp-Engine Oil
| 10***76 | Hose As | 1 |
| 11***86 | Lines Group-Engine Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
1w-6030 Lines Gp-Turbocharger Oil
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
4w-2195 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
Machine Arrangement
116-2620 Chassis Ar
| 10***97 | Tank & Mtg Group-Fuel | 1 |
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
116-2622 Chassis Ar
| 10***97 | Tank & Mtg Group-Fuel | 1 |
| 11***22 | Chassis Ar | 1 |
| 11***78 | Enclosure Group-Engine | 1 |
140-7833 Conversion Ar-Roading
| 12***28 | Lighting Group-Roading | 1 |
| 14***74 | Steering Ar-Secondary | 1 |
| 14***33 | Conversion Ar-Roading | 1 |
120-9806 Conversion Gp-Machine
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***33 | Screw-Drilling | 4 |
| 11***44 | Scraper Group-Drum | 1 |
115-5964 General Ar
| 11***18 | Engine Ar | 1 |
| 11***64 | General Ar | 1 |
| 11***14 | Electrical Ar | 1 |
115-5966 General Ar
| 11***18 | Engine Ar | 1 |
| 11***66 | General Ar | 1 |
| 11***14 | Electrical Ar | 1 |
Operator Station
154-6318 Air Conditioner Ar
| 14***92 | Shaft | 1 |
| 15***18 | Air Conditioner Ar | 1 |
| 18***33 | Shot; (Steel)(10-Kg) | 0 |
122-5920 Cab Ar
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***64 | Seal-O-Ring | 1 |
176-8224 Cab Ar
| 10***73 | Control Group-Service Brake | 1 |
| 11***26 | Brake & Axle Group | 1 |
| 11***56 | Horn Group-Electric | 1 |
125-9547 Cab Ar
| 11***33 | Tube As | 1 |
| 12***47 | Cab Ar | 1 |
| 15***74 | Latch-Door | 1 |
172-5054 Cab Ar
| 08***28 | Cylinder Group-Mounting | 1 |
| 11***44 | Seat Group | 1 |
| 12***97 | Mounting Group-Cab | 1 |
125-4138 Cab Ar
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***37 | Seal | 1 |
123-3878 Cab Gp
| 11***44 | Seat Group | 1 |
| 12***91 | Wiring Group-Cab | 1 |
| 12***53 | Cab Group | 1 |
122-8953 Cab Gp
| 08***28 | Cylinder Group-Mounting | 1 |
| 11***44 | Seat Group | 1 |
| 12***97 | Mounting Group-Cab | 1 |
138-6212 Compactometer Ar-Cvm & Freq
| 08***67 | Lamp; (24-Volt, 5-Watt) | 1 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 10***41 | Handle | 1 |
138-6213 Compactometer Ar-Cvm Frq & Spd
| 08***67 | Lamp; (24-Volt, 5-Watt) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***23 | Collar | 2 |
159-3860 Compressor Gp-Refrigerant
| 08***25 | Guide | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***46 | Converter Group-Electrical; (24-Volt To 12-Volt) | 1 |
159-3867 Condenser & Mtg Gp-Refrigerant
| 08***72 | Seal | 1 |
| 08***25 | Guide | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
117-9982 Console Gp-Instrument
| 08***72 | Seal | 1 |
| 08***25 | Guide | 1 |
| 11***82 | Console Group-Instrument | 1 |
128-6558 Console Gp-Operator
| 03***32 | Board As-Terminal | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
126-3629 Console Gp-Operator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
| 11***09 | Panel As-Control | 1 |
147-0522 Console Gp-Operator
| 03***38 | Screw; (6-32x1.0in) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
134-3842 Console Gp-Operator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
152-8122 Console Gp-Operator
| 03***38 | Screw; (6-32x1.0in) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
109-1035 Console Gp-Operator
| 08***00 | Lockwasher; (2.3mm Thk) | 4 |
| 10***35 | Console Group-Operator | 1 |
| 15***71 | Condensor | 1 |
121-6951 Console Gp-Operator
| 08***35 | Lighting Group-Warning | 1 |
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
140-1697 Control Gp-Direction & Speed
| 06***87 | Terminal | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
117-2909 Control Gp-Direction & Speed
| 03***38 | Screw; (6-32x1.0in) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
137-1613 Control Gp-Handle
| 03***77 | Ball Joint | 1 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
| 10***13 | Cable Group-Throttle | 1 |
7r-3147 Control Gp-Blade -Lever
| 03***38 | Screw; (6-32x1.0in) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
132-8896 Cylinder & Mtg Gp-Tilt
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***19 | Switch-Push Button; (Vibratory Select On/Off) | 1 |
| 10***21 | Cap | 1 |
086-9528 Cylinder & Mtg Gp-Tilt
| 03***77 | Ball Joint | 1 |
| 08***28 | Cylinder Group-Mounting | 1 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 3 |
111-2548 Door Gp-Cab
| 08***72 | Seal-O-Ring | 1 |
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***19 | Switch-Push Button; (Vibratory Select On/Off) | 1 |
153-2672 Evaporator Gp-Refrigerant
| 08***19 | Seal-Rubber | 2 |
| 08***96 | Adapter | 2 |
| 08***13 | Hose | 2 |
159-3836 Evaporator Gp-Refrigerant
| 08***19 | Seal-Rubber | 2 |
| 08***72 | Lever | 1 |
| 08***82 | Clamp | 2 |
159-3868 Filter Gp-Cab Air
| 10***41 | Handle | 1 |
| 10***44 | Latch As-Rotary | 1 |
| 11***26 | Window Group-Cab | 1 |
145-0439 Gauge Gp-Vibratory
| 14***39 | Gauge Group-Vibratory | 1 |
| 15***72 | Evaporator Group-Refrigerant | 1 |
| 15***53 | Bracket-Lh | 1 |
121-2001 Gauge Gp-Vibratory
| 12***01 | Gauge Group-Vibratory | 1 |
| 15***46 | Evaporator | 1 |
| 15***49 | Valve | 1 |
108-7735 Guard Gp-Vandalism
| 10***35 | Guard Group-Vandalism | 1 |
| 15***00 | Filter Element As-Cab Air | 1 |
| 15***15 | Bracket | 1 |
1g-6588 Control Gp-Handle
| 12***21 | Kit-Cable | 1 |
| 1B***02 | Nut (.3125" Diameter); Nut-- Generator Line Leads | 2 |
| 1B***30 | Nut-- Flame Arrestor Or Adapter To Pipe Assembly | 2 |
1g-3752 Heater Gp-Cab
| 10***89 | Guard-Magneto Sensor | 1 |
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 12***32 | Tachometer; (-Instrument) | 1 |
112-9156 Horn Gp-Electric
| 10***51 | Cover | 1 |
| 11***56 | Horn Group-Electric | 1 |
| 1G***95 | Bolt | 2 |
136-6880 Kit-Cab Mount
134-3013 Kit-Seat
7r-6606 Lever Gp-Propel
| 11***43 | Harness As | 1 |
| 7R***06 | Lever As | 1 |
| 7T***69 | Horn As; (24-Volt, Low Tone) | 1 |
111-1366 Lever Gp-Propel
| 11***66 | Lever Group-Propel | 1 |
| 13***34 | Spacer | 2 |
| 13***35 | Spacer | 2 |
135-2929 Module Gp-Warning Indicator -Engine Temperature
| 10***41 | Connector-Tube | 4 |
| 13***29 | Lighting Group-Warning; -Engine Temperature | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
159-3834 Lines Gp-Air Conditioner
| 12***73 | Plate | 2 |
| 15***34 | Lines Group-Air Conditioner | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
121-6698 Lines Gp-Cab Heater
| 09***02 | Swivel | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 1 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
127-8898 Lines Gp-Cab Heater
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
| 12***98 | Lines Group-Cab Heater | 1 |
124-7491 Mirror Gp-Rear View
| 12***91 | Mirror Group-Rear View | 1 |
| 15***75 | Hose As | 1 |
| 15***76 | Hose As | 1 |
126-8055 Module Gp-Speed & Vibratory
| 10***41 | Connector-Tube | 4 |
| 12***55 | Module Group-Speed & Vibratory | 1 |
| 13***61 | Sleeve-Abrasion; (93.5-cm Each) | 0 |
121-6697 Mounting Gp-Cab
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
133-9646 Mounting Gp-Cab
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 13***46 | Mounting Group-Cab | 1 |
125-2652 Operator Ar
| 08***97 | Washer | 2 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 12***52 | Operator Ar | 1 |
116-2628 Operator Ar
| 08***97 | Washer | 2 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***25 | Door As | 1 |
117-1007 Platform Gp-Operator
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***07 | Platform Group-Operator | 1 |
| 13***34 | Spacer | 2 |
125-0657 Platform Gp-Operator
| 10***77 | Control Group-Steering | 1 |
| 10***28 | Seat Group | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
082-6396 Pump Gp-Cab Tilt
| 05***02 | Plug | 1 |
| 08***96 | Pump Group-Cab Tilt | 1 |
| 11***25 | Door As | 1 |
125-4137 Rops Ar
| 05***02 | Plug | 1 |
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
1g-8223 Rops Gp
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 2 |
8y-6856 Seat Belt Gp
| 08***45 | Kit-Pump Repair | 1 |
| 08***27 | Lever-Control | 1 |
| 8Y***56 | Seat Belt Group | 1 |
6c-7314 Seat Gp-Suspension
| 13***82 | Adjuster St | 1 |
| 13***83 | Cushion-Seat | 1 |
| 13***84 | Cushion-Back | 1 |
116-0644 Seat Gp
| 11***44 | Seat Group | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
119-5122 Seat Gp
| 03***43 | Nut; (5/16-18 Thd) | 4 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 4 |
| 11***22 | Seat Group | 1 |
9v-8184 Seat Gp-Suspension
| 10***29 | Seat Belt Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
105-7628 Seat Gp
| 10***28 | Seat Group | 1 |
| 10***40 | Handle-Adjustment; (Lumbar) | 1 |
| 6I***79 | Kit; (Foam Seat) | 1 |
6i-5381 Seat Gp
| 10***73 | Control Group-Service Brake | 1 |
| 11***26 | Brake & Axle Group | 1 |
| 11***36 | Fender Group-Wide | 1 |
103-5953 Seat Gp
| 10***53 | Seat Group; -Vinyl | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
9c-4449 Seat Gp
| 12***37 | Rops As | 1 |
| 6V***46 | Trim; (5-Dm) | 0 |
| 6V***82 | Nut-Full (3/4-10 Thd) | 8 |
9v-7924 Suspension Gp-Seat
| 10***08 | Plate-Seat Base | 1 |
| 10***53 | Seat Group; -Vinyl | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
4i-9797 Suspension Gp-Seat
| 11***43 | Plate | 2 |
| 12***56 | Belt-Tether | 2 |
| 3E***25 | Bolt-Socket Head; (M8x1.25x50-mm) | 4 |
1g-3772 Heater Gp-Cab
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 12***32 | Tachometer; (-Instrument) | 1 |
| 14***84 | Guard-Magneto Sensor | 1 |
111-2525 Washer Gp-Window
| 10***38 | Handle; (Reclining-Rh) | 1 |
| 10***39 | Handle-Height & Tilt | 1 |
| 11***25 | Washer Group-Window | 1 |
111-2529 Window Gp-Cab
| 02***24 | Locknut; (1/4-20-Thd) | 2 |
| 11***29 | Window Group-Cab | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 12 |
111-2526 Window Gp-Cab
| 11***26 | Window Group-Cab | 1 |
| 4I***98 | Damper Assembly. Kit | 1 |
| 8Y***05 | Kit-Bumper | 1 |
Power Train
119-4995 Axle & Mtg Gp-Drive
| 11***95 | Axle & Mtg Group-Drive | 1 |
| 13***95 | Axle Group | 1 |
| 15***44 | Planetary Group-Final Drive | 1 |
117-2657 Axle & Mtg Gp-Drive
| 11***57 | Axle & Mtg Group-Drive | 1 |
| 11***31 | Axle Group; Axle Gp-Drive | 1 |
| 1D***24 | Bolt--19 mm (3/4 Inches) X 229 mm (9 Inches) | 8 |
168-8693 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***58 | Housing-Brake; (Rh)(Rh) | 1 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
138-2495 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 1 |
138-2496 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***44 | Rod-Brake Control | 2 |
| 05***55 | Pin-Pivot | 4 |
117-7531 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 03***20 | Bolt; (1/2-13x1.45-In) | 8 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
117-7532 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 03***20 | Bolt; (1/2-13x1.45-In) | 8 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
138-2497 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 1 |
117-7530 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***44 | Rod-Brake Control | 2 |
| 05***55 | Pin-Pivot | 2 |
120-9769 Brake & Axle Gp
| 10***07 | Valve & Mtg Group-Brake & Shift | 1 |
| 11***82 | Lines Group-Service Brake | 1 |
| 12***69 | Brake & Axle Group | 1 |
112-4526 Brake & Axle Gp
| 10***47 | Lines Group-Brake | 1 |
| 10***07 | Valve & Mtg Group-Brake & Shift | 1 |
| 11***26 | Brake & Axle Group | 1 |
163-0053 Differential Gp
| 16***53 | Differential Group | 1 |
116-5505 Drive Gp-Drum
| 07***92 | Mount, Rubber Shock | 6 |
| 11***52 | Seal-O-Ring | 1 |
| 11***36 | Plate | 1 |
116-5508 Drive Gp-Drum
| 07***92 | Mount, Rubber Shock | 8 |
| 11***52 | Seal-O-Ring | 1 |
| 11***35 | Plate | 1 |
139-2038 Drive Gp-Drum
| 11***52 | Seal-O-Ring | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
| 13***70 | Planetary Group-Final Drive; -Without Motor | 1 |
139-2040 Drive Gp-Drum
| 11***52 | Seal-O-Ring | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
| 13***70 | Planetary Group-Final Drive; -Without Motor | 1 |
158-7787 Drum Gp-Drive & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 13***35 | Drum Group-Smooth | 1 |
| 13***78 | Plate-Drum Drive | 1 |
158-7786 Drum Gp-Drive & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 13***36 | Drum Group-Padded | 1 |
| 14***46 | Plate-Drum Drive | 1 |
139-2032 Drum Gp-Drive & Vibratory
| 13***32 | Drum Group-Drive & Vibratory | 1 |
| 13***35 | Drum Group-Smooth | 1 |
| 13***38 | Drive Group-Drum | 1 |
139-2033 Drum Gp-Drive & Vibratory
| 13***33 | Drum Group-Drive & Vibratory | 1 |
| 13***36 | Drum Group-Padded | 1 |
| 13***40 | Drive Group-Drum | 1 |
116-5509 Drum Gp-Padded
| 11***07 | Drum Group-Padded | 1 |
| 11***08 | Drive Group-Drum | 1 |
| 11***09 | Drum Group-Padded | 1 |
121-2794 Drum Gp-Padded
| 07***92 | Mount, Rubber Shock | 8 |
| 11***35 | Plate | 1 |
| 11***07 | Drum Group-Padded | 1 |
116-5507 Drum Gp-Padded
| 07***08 | Bearing; (Tapered Roller) | 4 |
| 07***84 | Shim; (0.8-mm Thk) | 2 |
| 07***54 | Retainer, Bearing | 4 |
139-2036 Drum Gp-Padded
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 13***36 | Drum Group-Padded | 1 |
| 13***81 | Drum As-Padded | 1 |
121-2795 Drum Gp-Padded
| 11***39 | Bumper Group-Drum | 1 |
| 12***94 | Drum Group-Padded | 1 |
| 12***95 | Drum Group-Padded | 1 |
116-5506 Drum Gp-Smooth
| 11***04 | Drum Group-Smooth | 1 |
| 11***05 | Drive Group-Drum | 1 |
| 11***06 | Drum Group-Smooth | 1 |
160-7044 Drum Gp-Smooth
| 11***39 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
| 12***58 | Spacer; (2-mm Thk) | 2 |
160-7043 Drum Gp-Smooth
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
121-2793 Drum Gp-Smooth
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 12***49 | Drum Group-Smooth | 1 |
139-2035 Drum Gp-Smooth
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 12***16 | Plate As | 2 |
| 13***35 | Drum Group-Smooth | 1 |
116-5504 Drum Gp-Smooth
| 07***08 | Bearing; (Tapered Roller) | 4 |
| 07***84 | Shim; (0.8-mm Thk) | 2 |
| 07***54 | Retainer, Bearing | 4 |
158-7788 Drum Gp-Smooth
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
121-2649 Drum Gp-Smooth
| 07***92 | Mount, Rubber Shock | 6 |
| 11***36 | Plate | 1 |
| 11***04 | Drum Group-Smooth | 1 |
158-7789 Drum Gp-Smooth
| 11***39 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
| 12***58 | Spacer; (2-mm Thk) | 2 |
7x-8144 Planetary Gp-Final Drive
| 07***90 | Ring-Retaining | 1 |
| 2L***93 | Pin,Straight | 3 |
| 7R***09 | Hub | 1 |
116-2630 Hydraulic Ar-Propel
| 11***30 | Hydraulic Ar-Propel | 1 |
| 11***38 | Motor & Mtg Group-Propel | 1 |
| 11***31 | Pump & Mtg Group-Propel | 1 |
122-1508 Installation Gp-Drum
| 12***08 | Installation Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 8 |
| 12***58 | Spacer; (2-mm Thk) | 8 |
119-0545 Lines Gp-Propel
| 10***88 | Bar | 5 |
| 10***82 | Hose As | 1 |
| 10***66 | Hose As | 1 |
129-6391 Lines Gp-Propel
| 10***88 | Bar | 5 |
| 11***17 | Hose As | 1 |
| 11***18 | Hose As | 1 |
116-7038 Motor & Mtg Gp-Propel
| 11***38 | Motor & Mtg Group-Propel | 1 |
| 12***60 | Motor Group-Propel; -Propel, Axle | 1 |
| 13***11 | Cap; (Tamper Resistant) | 2 |
123-6826 Planetary Gp-Final Drive
| 07***90 | Ring-Retaining | 1 |
| 11***33 | Coupling | 1 |
| 11***18 | Shaft-Planetary | 6 |
136-8870 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 6 |
| 09***58 | Ring-Retaining | 3 |
| 13***64 | Disc-Friction | 5 |
155-6744 Planetary Gp-Final Drive
| 09***92 | Pin-Spring | 2 |
| 09***19 | Ring-Retaining | 3 |
| 15***16 | Plug-Drain; (Final Drive Planetary) | 1 |
116-2616 Power Train Ar
| 11***16 | Power Train Ar | 1 |
| 11***09 | Drum Group-Padded | 1 |
| 11***57 | Axle & Mtg Group-Drive | 1 |
116-2615 Power Train Ar
| 11***15 | Power Train Ar | 1 |
| 11***06 | Drum Group-Smooth | 1 |
| 11***57 | Axle & Mtg Group-Drive | 1 |
117-1831 Pump & Mtg Gp-Propel
| 11***22 | Drive Group-Pump | 1 |
| 11***29 | Tee-O-Ring | 2 |
| 11***38 | Pump Group-Piston | 1 |
124-8918 Pump & Mtg Gp-Propel
| 11***81 | Hose As | 2 |
| 11***83 | Hub As-Coupling | 1 |
| 12***18 | Pump & Mtg Group-Propel | 1 |
119-0551 Wheel & Tire Gp
| 11***51 | Wheel & Tire Group | 1 |
| 11***78 | Wheel & Tire Group | 1 |
| 11***79 | Wheel & Tire Group | 1 |
1g-3605 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
118-5607 Wheel & Tire Gp
| 11***07 | Wheel & Tire Group | 1 |
| 1G***05 | Wheel & Tire Group | 2 |
| 5H***04 | Washer Rear Bracket Assembly To Frame; Washer-Rear Bracket Assembly To Frame | 16 |
119-0678 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
117-9167 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 2 |
| 07***06 | Nut-Valve Stem | 2 |
| 07***92 | Valve | 2 |
119-0679 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
Service Equipment And Supplies
127-8781 Cart Gp-Filter
| 11***63 | Pump As-Washer | 2 |
| 11***88 | Tank As-Window Washer | 1 |
| 12***81 | Cart Group-Filter | 1 |
Charts & Films
| 10***15 | Film-Notice | 1 |
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***06 | Film-Cp-563c | 2 |
120-8183 Film Gp
| 12***83 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
125-7763 Film Gp
| 12***63 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
107-8697 Film Gp
| 10***97 | Film Group | 1 |
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
120-8181 Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 10***58 | Film-Instruction; (Operator) | 1 |
| 12***81 | Film Group | 1 |
120-8180 Film Gp
| 00***45 | Sleeve | 2 |
| 00***39 | Elbow | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
120-8184 Film Gp
| 12***84 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
120-8179 Film Gp
| 12***79 | Film Group | 1 |
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
120-8182 Film Gp
| 12***82 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
128-4238 Flushing Gp-Drum
| 12***38 | Flushing Group-Drum | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
128-4241 Flushing Gp-Drum
| 12***41 | Flushing Group-Drum | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
128-4242 Flushing Gp-Drum
| 12***42 | Flushing Group-Drum | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***26 | Plate-Warning; (No Clearance, Dutch) | 2 |
119-0544 Plate & Film Gp
| 11***44 | Plate & Film Group | 1 |
| 12***93 | Connector | 1 |
| 12***81 | Cart Group-Filter | 1 |
124-8233 Plate & Film Gp
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***06 | Film-Cp-563c | 2 |
| 12***78 | Plate & Film Group | 1 |
119-3998 Plate & Film Gp
| 00***07 | Elbow; (90 Degree) | 1 |
| 11***98 | Plate & Film Group | 1 |
| 12***87 | Adapter | 1 |
120-8178 Plate & Film Gp
| 12***78 | Plate & Film Group | 1 |
| 12***51 | Connector | 1 |
| 12***89 | Valve-Ball | 1 |
146-9424 Plate & Film Gp
| 10***15 | Film-Notice | 1 |
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***08 | Film | 2 |
146-5083 Plate & Film Gp
| 14***83 | Plate & Film Group | 1 |
| 5P***44 | Film Warning; On Front Vertical Surface Of Platform On Right Side & Left Side Of Fuel Tank Under The Grab Irons | 2 |
| 6V***11 | Film; Film-Warning. Located On Front Of Fuel | 1 |
124-8234 Plate & Film Gp
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***05 | Film | 2 |
| 12***78 | Plate & Film Group | 1 |
152-8115 Plate & Film Gp
| 12***64 | Plate-Rops/Fops | 1 |
| 12***66 | Film-Instruction | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
146-9425 Plate & Film Gp
| 11***03 | Film-Identification; (Fuse) | 1 |
| 11***06 | Film-Cp-563c | 2 |
| 12***78 | Plate & Film Group | 1 |
Steering System
125-0663 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 12***68 | Steering Column | 1 |
121-6699 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 12***68 | Steering Column | 1 |
101-8677 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***43 | Steering Column Group | 1 |
109-6704 Cylinder & Mtg Gp-Steering
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***76 | Hose As | 2 |
| 10***04 | Cylinder & Mtg Group-Steering | 1 |
119-7220 Cylinder & Mtg Gp-Steering
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***06 | Pin As | 4 |
| 11***19 | Cylinder Group-Hydraulic | 2 |
101-8477 Lines Gp-Steering Cylinder
| 10***77 | Lines Group-Cylinder | 1 |
| 11***46 | Hose As | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 8 |
140-8155 Lines Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***88 | Hose As | 1 |
| 11***18 | Tee-Swivel | 1 |
125-9441 Lines Gp-Steering
| 10***90 | Clamp-Block | 1 |
| 12***66 | Bar | 1 |
| 12***10 | Hose As | 1 |
121-6700 Lines Gp-Steering
| 10***66 | Sleeve-Abrasion | 1 |
| 10***90 | Clamp-Block | 1 |
| 12***00 | Lines Group-Steering | 1 |
123-6582 Lines Gp-Steering
| 10***90 | Clamp-Block | 3 |
| 12***66 | Bar | 6 |
| 12***82 | Lines Group-Steering | 1 |
125-0662 Lines Gp-Steering
| 10***90 | Clamp-Block | 2 |
| 12***66 | Bar | 4 |
| 12***48 | Hose As | 1 |
141-1199 Mounting Gp-Accessory Module
| 14***99 | Mounting Group-Accessory Module | 1 |
| 14***00 | Plate As | 1 |
| 14***01 | Pump & Motor Group-Sec Steering | 1 |
141-1201 Pump & Motor Gp-Sec Steering
| 14***01 | Pump & Motor Group-Sec Steering | 1 |
| 14***02 | Motor-Electric | 1 |
| 14***03 | Pump-Secondary Steering | 1 |
117-2655 Pump & Mtg Gp-Steering
| 10***61 | Elbow-Face Seal | 1 |
| 11***97 | Pump Group-Gear | 1 |
| 11***55 | Pump & Mtg Group-Steering | 1 |
125-1179 Pump & Mtg Gp-Steering
| 10***61 | Elbow-Face Seal | 1 |
| 12***63 | Pump Group-Gear | 1 |
| 12***79 | Pump & Mtg Group-Steering | 1 |
1g-9787 Pump Gp-Metering
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
140-2974 Steering Ar-Secondary
| 14***74 | Steering Ar-Secondary | 1 |
| 14***55 | Lines Group-Secondary Steering | 1 |
| 14***99 | Mounting Group-Accessory Module | 1 |
Vibratory System
121-2648 Drive Gp-Support & Vibratory
| 07***70 | Bushing-Terminal | 1 |
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
139-2054 Drive Gp-Support & Vibratory
| 07***70 | Bushing-Terminal | 1 |
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
116-5887 Drive Gp-Support & Vibratory
| 07***70 | Bushing-Terminal | 1 |
| 10***44 | Edge-Cutting | 2 |
| 10***45 | Edge-Cutting; (Mid-Section) | 1 |
1g-8830 Support Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***09 | Elbow | 2 |
| 15***54 | Pump Group-Piston; -Vibratory | 1 |
140-8267 Housing Gp-Eccentric Weight -Rh
| 07***92 | Mount, Rubber Shock | 4 |
| 12***04 | Plate As-Support | 1 |
| 12***06 | Plate As-Support | 1 |
140-8266 Housing Gp-Eccentric Weight -Lh
| 07***92 | Mount, Rubber Shock | 4 |
| 10***93 | Motor & Mtg Group-Vibratory | 1 |
| 12***04 | Plate As-Support | 1 |
121-6949 Hydraulic Ar-Vibratory
| 12***49 | Hydraulic Ar-Vibratory | 1 |
| 12***87 | Shaft | 1 |
| 12***39 | Seal | 2 |
147-0521 Hydraulic Ar-Vibratory
| 11***76 | Filter & Mtg Group-Hydraulic | 1 |
| 11***26 | Lines Group-Hydraulic Filter | 1 |
| 11***47 | Pump & Mtg Group-Vibratory | 1 |
134-3841 Hydraulic Ar-Vibratory
| 12***88 | Shaft | 1 |
| 12***39 | Seal | 4 |
| 12***40 | Bearing | 2 |
116-2633 Hydraulic Ar-Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 11***33 | Hydraulic Ar-Vibratory | 1 |
| 14***08 | Plate | 1 |
160-7630 Lines Gp-Vibratory
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
| 12***41 | Hose As; (3/8-16x4.75in) | 1 |
119-0548 Lines Gp-Vibratory
| 11***76 | Filter & Mtg Group-Hydraulic | 1 |
| 11***26 | Lines Group-Hydraulic Filter | 1 |
| 11***48 | Lines Group-Vibratory | 2 |
145-0438 Lines Gp-Vibratory
| 11***64 | Hose As | 1 |
| 11***70 | Hose As | 1 |
| 11***75 | Hose As | 1 |
129-6392 Lines Gp-Vibratory
| 12***49 | Lines Group-Hydraulic Filter | 1 |
| 12***50 | Filter & Mtg Group-Hydraulic | 1 |
| 12***92 | Lines Group-Vibratory | 2 |
108-2793 Motor & Mtg Gp-Vibratory
| 10***93 | Motor & Mtg Group-Vibratory | 1 |
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
140-9614 Motor & Mtg Gp-Vibratory
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
| 12***41 | Hose As; (3/8-16x4.75in) | 1 |
134-3844 Pump & Mtg Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***62 | Pump Group-Piston | 1 |
| 12***09 | Elbow | 2 |
121-6950 Pump & Mtg Gp-Vibratory
| 12***50 | Pump & Mtg Group-Vibratory | 1 |
| 14***77 | Motor Group-Piston | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
124-8908 Pump & Mtg Gp-Vibratory
| 10***69 | Seal; (27.5mm Id) | 2 |
| 11***98 | Pump Group-Piston | 1 |
| 11***12 | Harness As | 1 |
119-0547 Pump & Mtg Gp-Vibratory
| 10***58 | Motor Group-Vibratory | 1 |
| 11***47 | Pump & Mtg Group-Vibratory | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
122-7974 Shaft Gp-Eccentric Weight
| 12***74 | Shaft Group-Eccentric Weight | 1 |
| 12***09 | Elbow | 2 |
| 13***43 | Pump Group-Piston | 1 |
147-0333 Shaft Gp-Eccentric Weight
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***09 | Elbow | 2 |
| 13***08 | Harness As-Pump | 1 |
159-9405 Support Gp-Vibratory -Drum
| 12***76 | Shaft As-Weight | 1 |
| 15***05 | Support Group-Vibratory; -Drum | 1 |
| 6V***87 | Plug-Pipe; (1/2 Npf) | 1 |
CS-563C serial number reference
On a CS-563C the ID plate is a riveted metal tag stamped with the model designation followed by the serial number. The first three characters of that serial number are the prefix identifying the build series (e.g. 4KN), and the digits that follow are the sequential unit number within that series. These pre-2000 units predate Cat's full 17-character PIN format, so what's stamped is essentially prefix plus sequence number, not a full PIN string. Exact plate mounting position on the frame is not consistently documented for this model — confirm placement against the machine's own operation and maintenance manual or with a dealer before relying on it in the field.
| Prefix | Identifies | Notes |
|---|---|---|
| 4KN | CS-563C single-drum vibratory smooth-drum soil compactor, Cat 3116 DIT diesel engine | Sole confirmed machine PIN prefix for the CS-563C. Production runs approximately 1995 through 2000, with some overlap reported against the CS-563D introduction — treat exact cutover year as approximate. Gross engine output is quoted variably across spec sheets as roughly 104-114 kW (140-153 hp) for the 3116 DIT; treat as varies by source/market rating rather than one fixed figure. The engine itself carries its own separate build serial number (commonly a 98Z-prefixed range) stamped on the engine block — do not confuse this with the 4KN machine PIN prefix stamped on the frame plate. |
Frequently asked questions
What engine does the Caterpillar CS-563C use?
A Cat 3116T, a turbocharged inline six-cylinder diesel rated around 145 hp (108 kW) gross, with mechanical unit injection and no engine ECM. The earlier, non-turbo CS-563 base model ran the naturally aspirated 3116; the turbo is what distinguishes the C-series.
What is the operating weight of the CS-563C?
Roughly 11.2 to 11.7 tonnes (about 24,700 to 25,700 lb), varying by configuration: the smooth-drum CS-563C sits toward the lower end, the padfoot CP-563C shell runs heavier, and cab type (open ROPS canopy vs enclosed cab) adds further variation. Confirm exact weight against the machine's nameplate.
What replaced the Caterpillar CS-563C?
The Cat CS-563D carried the model line forward from around 1998 to 2000 onward, followed later by an E-series update. The D-series kept the same general compactor layout but moved the platform beyond the fully mechanical C-series engine and controls.
What CS-563C owners discuss
What engine is actually in the CS-563C, and what do owners say about its quirks?
The CS-563C runs the Cat 3116 DIT, a direct-injection turbocharged inline-six diesel rated around 104 kW gross (roughly 140-145 hp gross, figures vary by source/configuration). It is a mechanical-injection engine, not the electronic units fitted to later D/E-series 563 rollers, so troubleshooting is closer to a classic diesel than a modern ECM-controlled unit. Two quirks come up repeatedly on 3116-powered machines of this era: the oil cooler is sealed with only two O-rings and seeps oil as they age, and the injector tip O-rings harden with heat cycling and eventually leak or let combustion gas past. Owners also flag the 3116 as unusually sensitive to air ingestion on the fuel suction side - a loose fitting or a filter change done without a proper bleed can starve injectors and, if run that way for any length of time, damage them. Low oil pressure on a tired unit is the other watch item, since spun main or rod bearings are a known 3116 failure mode when oil starvation goes unnoticed. Have your dealer verify oil pressure, compression, and oil cooler seal condition before putting a used CS-563C to work.
How does the CS-563C's dual-pump propel system behave, and what goes wrong with it?
The CS-563C uses Cat's dual-pump propel arrangement carried through the whole 563 family: one pump drives the rear axle, a second independently drives the front drum motor, giving balanced flow to both ends instead of splitting one pump's output. Owners who ran the original 563 head-to-head against competing single-pump rollers rate the driveline as best in its class for exactly this reason - both the tires and the drum get real drive power. The tradeoff is two pumps to maintain instead of one. A documented failure mode on a CS-563 propel pump was excess system pressure that blew out a hydraulic test port, pointing to a relief or pressure-control fault rather than a simple leak. If a used unit surges, won't hold steady propel speed, or feels weak on grade, compare inlet and outlet temperatures on both pumps rather than assuming a single bad part - the manual does not always list dedicated test ports, so a tee-in gauge on the line is often needed. Have your dealer verify propel system pressures against factory spec before the machine goes back into service.
The drum lost vibration - is it the exciter motor or something else?
Across the CS/CP-563 line, loss of vibration on the drum is one of the most common complaints, and the consensus among techs is that it is rarely the vibratory motor itself. Work the cheap checks first: fuses, wiring to the vibration solenoid, and hydraulic supply/flow to the drum before pulling anything apart. If flow and voltage both check out at the drum, the next suspect is the eccentric weight shaft bearings inside the drum - once they wear, the shaft can bind or lose amplitude, and fine metallic glitter showing up in the drum-drive oil or filter is the classic sign a bearing is breaking down internally. Lube service intervals for the eccentric shaft bearings differ across the CS-563 series generations, so confirm the interval against the O&M manual for the specific serial range rather than assuming a fixed number. Have your dealer verify eccentric-shaft bearing condition and vibratory hydraulic pressure before returning the drum to service.
What electrical or sensor issues show up on this class of Cat roller?
Because a vibratory roller shakes every wire and connector on the machine all day, chafed harnesses and corroded or loose connector pins are a recurring theme on this size of Cat compactor - more so than actual sensor failures. Reported symptoms range from a machine that cranks but won't reliably fire, to one that starts and runs for under a minute before dying like the key was switched off, with the fix traced to wiggling or reseating a harness connector rather than replacing a part. The practical approach owners and techs describe is to back-probe suspect connectors under load and look for heat discoloration or corrosion before condemning a sensor. On later D and E-series 563 rollers, drum-versus-tire speed mismatches have also been traced to contaminated hydraulic oil sticking a drive solenoid rather than a bad speed sensor - a useful reminder that fluid condition should be checked alongside any fault code, though that specific symptom is documented on the newer series and should not be assumed to apply unchanged to the C-series drivetrain. Have your dealer verify wiring continuity and sensor readings against the machine's electrical schematic before swapping components.
What undercarriage and wear items are typical for a single-drum roller like this?
Wear concentrates in a few predictable spots on this class of machine: drive tires, drum bearings, and the articulation center-pin and bushings at the frame hinge. Because a single-drum smooth roller steers by articulating at the center pivot rather than turning the wheels, uneven tire wear or a knock felt in the joint under load usually points to a worn center-pin bushing rather than a wheel alignment problem, and these joints see more flex-driven wear than a rigid-frame machine, so grease intervals matter more here. Tire sizing across the CS/CP-563 range is commonly cited around 23.1x26 section, though exact fitment can vary by configuration. Where a padfoot shell kit is fitted (CP-563C), inspect the shell segments for cracking and elongation at the foot welds first - that is where padfoot shells typically show fatigue before the underlying drum or bearing does.
What should I check before buying a used CS-563C?
Start with the serial plate and service history, then walk the machine cold: engine oil pressure and compression, listen for injector or turbo noise, and check for oil weeping at the oil cooler O-rings on the 3116. Run the hydraulics and compare temperatures across the propel pumps and the vibratory circuit rather than trusting gauges alone - a slow-rising or overly hot circuit under load is the first sign of internal pump wear. Cycle the vibration system with the drum off the ground and listen for bearing noise or a drop in amplitude. Check drum shell thickness and, on padfoot units, foot wear and weld cracking, plus tire tread depth and sidewall condition. Grab the articulation joint and check for play at the center pin under engine load. Given these are now roughly three-decade-old machines on the used market, most surviving CS-563C units are well past their first full driveline and undercarriage service cycle, so price accordingly and budget for a hydraulic pump or bearing job rather than expecting factory tolerances.
Is the CS-563C generally considered a reliable machine by people who have run one?
Yes, with the caveat that it is an older platform now. Operators who put the original 563 up against competing single-pump rollers when it was new rated its driveline as the strongest in its class, largely on the strength of the dual-pump propel system. Used-market listings show CS-563C units still working in the low thousands to 7,000-plus hours, which lines up with a generally durable base machine when hydraulic cleanliness and 3116 oil/fuel discipline have been maintained. The failure points that do surface - propel pump pressure faults, eccentric-shaft bearing wear, oil cooler seepage, and vibration-induced wiring faults - are wear-and-maintenance issues rather than design flaws, and they show up more on neglected units than on machines with a documented service history.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CS-563C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.