Caterpillarpaving compactorvibratory compactor
Caterpillar CS-433C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CS-433C is a single-drum vibratory soil compactor built for subgrade, base, and utility trench compaction on road and site work. It rides on a smooth steel drum up front and rubber tires at the rear, with drive to both ends of the machine. Power comes from the Cat 3054T, a turbocharged, mechanically governed four-cylinder diesel rated around 78.3 kW (105 hp) gross - fully mechanical fuel injection and governing, with no engine ECM. Operating weight runs roughly 6,670 to 6,977 kg depending on ballast, tire, and drum configuration (smooth-drum CS and pad-foot CP variants share the same chassis and powertrain). Caterpillar built this C-series under serial prefixes 2JM and 3TM from about 1997 to 2002. It followed the CS-433B and was itself replaced by the CS/CP-433E generation, which moved to an updated engine and electronically managed, emissions-compliant calibration.
The C-series update over the 433B centered on the engine and hydraulics rather than a ground-up redesign: the 3054T carried the compactor's proven single-drum, dual-propel architecture while refining fuel and cooling system details for the era. When Caterpillar moved on to the 433E generation, the bigger change was electronic engine management and tighter emissions compliance, which also added cost and complexity that many contractors running mixed older fleets prefer to avoid. That is part of why the CS-433C still circulates steadily in the used equipment and parts market: it is a simple, mechanical machine with no ECM to fail, no aftertreatment system, and a service base built around one of Caterpillar's most widely produced small diesels. For buyers and independent shops, that mechanical simplicity, paired with a straightforward vibratory drum and hydrostatic propel system, keeps the CS-433C a practical, repairable choice for site and utility compaction work well after factory production ended.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CS-433C specifications
Engine
| Engine model | Cat 3054T, 4-cylinder turbocharged diesel |
| Gross power | 78.3 kW (105 hp) |
| Net power | Not separately published for this model |
| Displacement | 4.0 L (244.1 cu in) |
| Cylinders | 4 |
| Emissions tier | Not documented for this model year range (1997-2002 production) - verify with your dealer |
Weights
| Operating weight | 6,670-6,977 kg (14,705-15,382 lb), varies by configuration/ballast |
| Shipping weight | Not published |
| Ground pressure | Not published |
Dimensions
| Transport length | 4.83 m (15 ft 10 in) |
| Transport width | 1.91 m (6 ft 3 in) |
| Transport height (to cab top) | 2.93 m (9 ft 7 in) |
| Wheelbase | 2.58 m (8 ft 6 in) |
| Ground clearance | 380 mm (14.97 in) |
| Drum width | 1.68 m (66.2 in) |
Performance
| Maximum travel speed | 12.8 km/h (8 mph) |
| Vibration frequency | 30 Hz |
| Centrifugal force, high amplitude | 56.6 kN (12,727 lbf) |
| Centrifugal force, low amplitude | 27.9 kN (6,273 lbf) |
| Gradeability | Not published |
Service capacities (summary)
| Fuel tank | 167 L (44.2 gal) |
| Hydraulic system | Not consistently documented — sources vary widely from about 7 L (1.9 gal) to about 71 L (18.8 gal); verify against this machine's OMM hydraulic-system capacity chart |
| Engine oil | 6.8 L (1.8 gal) |
| Cooling system | Not documented - verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CS-433C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3054T diesel | 6.8 L (1.8 US gal) | Cat DEO (Diesel Engine Oil), API CH-4 or higher / Cat ECF-1 quality level. Viscosity by ambient: SAE 10W-30 in cold climates, SAE 15W-40 for general multi-climate use, up to SAE 20W-50 in sustained hot ambient. |
| Cooling system — Cat 3054T, rear-mounted radiator | Not confirmed for this exact model in available public specs; comparable 3054-series industrial engine cooling systems run roughly 14-18 L (3.7-4.8 US gal). Verify against the machine's own OMM cooling-system chart. | Cat ELC (Extended Life Coolant), premixed 1:1 with water, or Cat DEAC (Diesel Engine Antifreeze/Coolant) on standard-interval service. ELC allows extended change intervals versus DEAC. |
| Fuel tank | 167 L (44.2 US gal) | No. 2-D diesel fuel meeting Cat's diesel fuel specification; switch to No. 1-D diesel fuel in extreme cold ambient to maintain cold flow properties. Use ultra-low-sulfur diesel where required by emissions configuration. |
| Hydraulic system (propel + vibratory circuit, tank and lines) | Reported values vary widely across specification listings for this machine, from about 7 L (1.9 US gal) up to about 71 L (18.8 US gal); the low figure looks inconsistent with typical hydraulic reservoir sizing for a compactor in this class and may reflect a transcription error on one or more listings. Treat as unconfirmed and verify against the machine's own OMM hydraulic-system capacity chart. | Cat HYDO Advanced (or equivalent Cat HYDO hydraulic oil) selected by viscosity grade to ambient operating temperature — lighter grade (e.g., HYDO 10W) for cold-weather startup, heavier grade (e.g., HYDO 30 or 10W-30 equivalent) for warm/general climate. |
| Wheel drive units / final drives (each), rear axle propel drive | Not documented in available public sources for this exact model; not broken out separately in the specification listings reviewed. Verify with the dealer parts/service system for the exact refill quantity per drive unit. | Cat TDTO (Transmission/Drive Train Oil), viscosity selected by ambient temperature per Cat's standard drive-train oil chart (lighter SAE 10W grade in cold climates, heavier SAE 30 grade in warm climates). |
| Grease points (chassis, articulation joint, drum bearings) — spec only, no fill capacity | Not applicable (grease gun application, not a fill-capacity system) | Cat multipurpose grease meeting NLGI Grade 2 consistency; Cat Advanced 3Moly Grease is the extended-service alternative where specified. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CS-433C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the CS-433C beyond the schedule
Predictive Maintenance & Fluid Analysis
On the CS-433C, S.O.S sampling of the 3054T's engine oil is the earliest warning for turbocharger bearing wear or injection pump wash-down, both known failure points on this mechanical fuel system. Pull hydraulic oil samples from the propel and vibratory circuits to catch pump or motor wear before drum drive or vibration output drops off. Coolant sampling (Level 1) protects the wet-liner block from cavitation erosion, a known 3054-family risk once inhibitor levels fall between scheduled changes.
Corrective & Common Repairs
Typical CS-433C repairs center on the propel system: hydrostatic pump and drum/wheel motor wear shows up as sluggish grade climbing or uneven tracking, usually traced to a worn charge pump or a drifting relief valve. On the engine side, the mechanical 3054T has no ECM to pull fault codes from, so injection pump timing, fuel return leakage, and turbocharger boost loss get diagnosed the old way - gauges, compression checks, and boost testing. Scraper bar wear and drum bearing seal weep round out the frequent shop visits.
Overhaul & Rebuild Points
Rebuild attention on the CS-433C concentrates on the vibratory drum: the eccentric weight shaft, its bearings, and the exciter housing seals wear from constant amplitude and frequency cycling, and are the usual overhaul trigger once oil samples or bearing play show it. Propel pump and motor units are the second major rebuild point on higher-hour machines. On the engine, expect turbocharger and injection pump rebuilds well before a full inline-four bottom-end rebuild - the 3054T's block and wet liners generally outlast its bolt-on wear components.
Seasonal & Environment Servicing
Cold-weather starts on the CS-433C depend on the 3054T's cold-start aid and correct antifreeze concentration; check coolant protection before winter layup, since this era predates factory block heaters as standard fit. Dusty or aggregate work accelerates air filter loading and drum scraper wear, so shorten primary element and scraper inspection intervals on quarry or subgrade jobs. On wet trench or utility work, check drum bearing seals more often, since standing water and mud push contamination into the eccentric housing faster than the baseline factory interval assumes.
CS-433C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 101-3743 | Seal | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 108-0671 | Filter Element-Air | Air intake service | Check fitment → |
| 108-0672 | Filter Element-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CS-433C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Coolant Temperature warning lamp (red) | Engine coolant temperature above the normal operating range | Low coolant level, plugged radiator fins, slipping or failed fan drive, or a faulty temperature sending unit | Shut down safely, let the engine cool, check coolant level and radiator core for debris, then verify sender/gauge circuit with a multimeter against the wiring schematic |
| Engine Oil Pressure warning lamp (red) | Engine oil pressure below the safe minimum | Low oil level, plugged oil filter, worn oil pump, or failed oil pressure switch | Stop the engine immediately, check oil level and filter condition, then test the pressure switch before restarting |
| Charging System warning lamp (amber/red) | Alternator not charging the battery circuit | Loose or worn alternator belt, failed alternator, or a broken charge wire/connector | Check belt tension and condition, inspect wiring connections, then bench-test or replace the alternator |
| Hydraulic Oil Temperature warning lamp | Hydraulic system oil temperature above normal range | Low hydraulic oil level, plugged hydraulic oil cooler, or sustained high-load operation such as continuous vibratory work in hot ambient conditions | Idle down and let temperature drop, check oil level and cooler fins for debris, then inspect the cooling fan drive |
| Air Cleaner Service (restriction) indicator | Air intake restriction has reached the service limit | Clogged primary air filter element from dusty compaction sites | Inspect and clean or replace the air filter element, then reset the restriction indicator |
| Parking/Propel Brake indicator lamp fault | Brake status circuit reads incorrectly or brake will not release as expected | Worn or failed brake switch contact block, a documented wear item on this compactor family | Inspect and replace the brake switch contact block, then verify brake release with the machine on stands |
| Hydraulic Filter Bypass indicator lamp | Hydraulic return or charge filter has bypassed due to restriction | Clogged hydraulic filter element or cold, high-viscosity oil at startup | Warm the machine per cold-start procedure, then replace the hydraulic filter element if the lamp stays on after warm-up |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CS-433C attachments & work tools
Smooth drum (base configuration)
Standard steel smooth drum, roughly 1.68 m (66 in) wide, for granular and semi-cohesive soils, base course and sub-base work. This is the factory CS-433C arrangement as sold before any shell conversion.
Padfoot / sheepsfoot drum configuration
Same chassis is offered from the factory as the CP-433C with a pad (sheepsfoot) drum for clay and cohesive-soil kneading compaction. Bolt-on padfoot shell kits sized for this 1.68 m (66 in) drum class are also sold to convert an existing smooth-drum CS-433C into pad configuration without changing the base machine.
Shell-kit mounting method
Padfoot conversion uses curved steel shell segments that bolt directly over or in place of the smooth drum shell using the drum's existing mounting flange and cap-screw pattern. No hydraulic quick-coupler is involved; fitment is a shop/dealer-installed mechanical bolt-on job, not a field-swappable coupler system.
Foot-controlled leveling/dozer blade
A front-mounted, foot-pedal-controlled leveling blade is documented for this compactor family for light dozing, backfilling and material knockdown, letting the operator run the blade one-footed while both hands stay on propel/steering controls. Availability and hydraulic circuit provisioning should be confirmed against the exact CS-433C serial range, since this option is most clearly documented on the later E-series version of the same platform.
Drum scraper bar / edge cutters
A spring-loaded, dual-direction non-metallic scraper bar rides against the drum as standard equipment to prevent material buildup and reduce noise. Steel edge/trim cutters for berm and edge work are used on machines in this class, fitted as a bolt-on option to the drum end plates rather than a quick-coupler tool.
ROPS/cab enclosure options
The platform was offered with an open ROPS canopy or an enclosed ROPS/FOPS cab, the latter with heater/AC, sun visor and mirrors. These are frame-mounted factory/dealer-fit structures, not field-interchangeable attachments.
Power train arrangement (for reference, not a work tool)
The CS-433C runs a Cat 3054T turbocharged diesel rated around 78 kW (105 hp) gross. Note the later CS-433E generation on the same nominal drum width instead uses a 3054C-rated engine at about 75 kW (100 hp) gross, so engine rating differs by series/generation and should not be assumed interchangeable.
All CS-433C assemblies by section
Every catalogued assembly group for the Caterpillar CS-433C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
141-9379 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
105-7597 Air Cleaner Gp
| 07***82 | Hood | 1 |
| 10***53 | Hose-Air | 1 |
| 10***97 | Air Cleaner Group | 1 |
110-4349 Air Cleaner Gp
| 10***71 | Filter Element-Air; (Primary) | 1 |
| 10***72 | Filter Element-Air; (Secondary) | 1 |
| 11***49 | Air Cleaner Group | 1 |
140-2759 Air Cleaner Gp
| 07***08 | Cover, . Ring; Slide | 1 |
| 14***57 | Hose-Air | 1 |
| 14***59 | Air Cleaner Group | 1 |
137-4682 Air Cleaner Gp
| 07***08 | Cover, . Ring; Slide | 1 |
| 13***82 | Air Cleaner Group | 1 |
| 14***79 | Air Cleaner Group | 1 |
6i-4203 Cartridge Gp-Turbocharger
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 6I***04 | Housing As | 1 |
| 6I***05 | Wheel | 1 |
142-0102 Extension Gp-Air Cleaner
| 07***54 | Clamp | 1 |
| 14***02 | Extension Group-Air Cleaner | 1 |
| 15***89 | Stack-Extension | 1 |
142-5073 Flange Gp-Exhaust
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***73 | Flange Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
110-7941 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 11***41 | Manifold Group-Exhaust | 1 |
| 15***33 | Stud | 4 |
100-3163 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***64 | Manifold-Exhaust | 1 |
6i-4680 Manifold Gp-Inlet
| 06***58 | Clamp-Hose | 1 |
| 13***01 | Hose-Inlet | 1 |
| 13***05 | Manifold-Inlet | 1 |
124-7710 Manifold Gp-Inlet
| 11***79 | Gasket | 2 |
| 11***60 | Manifold-Inlet | 1 |
| 11***62 | Plate | 1 |
105-7596 Muffler Gp
| 10***89 | Tube As | 1 |
| 10***96 | Muffler Group | 1 |
| 11***41 | Plate | 1 |
140-3001 Muffler Gp
| 14***01 | Muffler Group | 1 |
| 14***02 | Tube As | 1 |
| 14***76 | Connector; (S23, S25, S26) | 1 |
137-4547 Muffler Gp
| 13***45 | Tube As-Exhaust | 1 |
| 13***47 | Muffler Group | 1 |
| 14***76 | Connector; (S23, S25, S26) | 1 |
219-9766 Turbocharger Gp
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
| 16***92 | Cartridge Group-Turbocharger | 1 |
150-1213 Turbocharger Gp
| 10***54 | Nut | 3 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 6 |
138-2077 Turbocharger Gp
| 13***77 | Turbocharger Group | 1 |
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
6i-4195 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***66 | Gasket | 1 |
| 10***17 | Elbow-Exhaust | 1 |
118-8384 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 7C***29 | Housing As | 1 |
Basic Engine
139-4669 Camshaft Gp
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
| 13***11 | Washer | 1 |
6i-0421 Camshaft Gp
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 13***30 | Camshaft | 1 |
133-9820 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
6i-0643 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
105-4157 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 10***57 | Cover Group-Valve Mechanism | 1 |
131-4698 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 11***04 | Seal-O-Ring | 1 |
131-5107 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 11***02 | Filler As | 1 |
156-0972 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 11***04 | Seal-O-Ring | 1 |
| 11***05 | Seal-O-Ring | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
139-4664 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
125-0377 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 4 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 4 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
209-5557 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-4238 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
139-4663 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 11***40 | Housing As | 1 |
| 11***41 | Gasket | 1 |
106-8759 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
233-4742 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
6i-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-6725 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
6i-3873 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
132-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-3884 Cylinder Block Gp-Short
| 6I***84 | Cylinder Block Group-Short | 1 |
101-3452 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
130-7007 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
132-9254 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***54 | Washer | 8 |
101-4072 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
164-6098 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 13***50 | Valve-Exhaust | 4 |
155-6650 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
139-4666 Cylinder Head Gp
| 13***66 | Cylinder Head Group | 1 |
| 16***61 | Gasket-Cylinder Head | 1 |
| 16***20 | Pin | 2 |
6i-1195 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
125-2551 Drain Gp-Engine Oil
| 12***51 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
114-4366 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 11***66 | Drive Group-Fan | 1 |
138-7738 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 13***80 | Pulley-Fan Drive | 1 |
| 13***39 | Housing As | 1 |
135-6394 Drive Gp-Fan
| 10***87 | Bolt; (M10x1.5x85-mm) | 4 |
| 13***79 | Pulley-Fan Drive | 1 |
| 13***38 | Housing As | 1 |
100-6321 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***21 | Flywheel Group | 1 |
6i-0788 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 25***09 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
101-3613 Housing Gp-Flywheel
| 06***23 | Dowel | 2 |
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
130-6352 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
101-4071 Housing Gp-Front
| 10***71 | Housing Group-Front | 1 |
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
139-4668 Housing Gp-Front
| 10***77 | Stud | 2 |
| 13***68 | Housing Group-Front | 1 |
| 14***44 | Shield | 1 |
142-0348 Lifting Gp-Engine
| 14***53 | Plate | 1 |
| 14***48 | Lifting Group-Engine | 1 |
| 14***49 | Plate-Lifting | 1 |
6i-0652 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 6I***93 | Bolt; (M10x1.5x30-mm) | 2 |
| 6I***52 | Lifting Group-Engine | 1 |
114-4334 Mounting Gp-Alternator
| 10***04 | Bracket | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 10***17 | Washer | 1 |
131-5115 Mounting Gp-Alternator
| 10***04 | Bracket | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 10***17 | Washer | 1 |
112-5054 Mounting Gp-Engine
| 10***54 | Mount As-Engine | 2 |
| 11***54 | Mounting Group-Engine | 1 |
| 12***57 | Mount As | 1 |
124-7695 Mounting Gp-Fan Drive
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 12***95 | Mounting Group-Fan Drive | 1 |
| 13***62 | Stud | 4 |
138-8106 Mounting Gp-Fan Drive
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 13***68 | Stud | 4 |
| 13***69 | Extension-Fan | 1 |
139-0668 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
138-1653 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
106-8851 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 10***51 | Pan Group-Oil | 1 |
108-9620 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 10***20 | Piston & Rod Group | 1 |
| 11***20 | Kit-Piston Ring | 4 |
6i-0224 Piston & Rod Gp
| 06***58 | Bushing-End | 1 |
| 06***67 | Ring-Retaining | 2 |
| 06***79 | Rod As | 4 |
139-4665 Piston & Rod Gp
| 13***73 | Kit-Piston Ring | 4 |
| 13***65 | Piston & Rod Group | 1 |
| 15***90 | Piston As | 4 |
130-4648 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
141-0728 Plug Gp-Engine
| 14***28 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
139-4667 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
Braking System
174-1478 Lines Gp-Service Brake
| 10***63 | Hose As | 1 |
| 11***87 | Hose As | 1 |
| 11***88 | Hose As | 1 |
112-2034 Lines Gp-Service Brake
| 10***63 | Hose As | 1 |
| 11***34 | Lines Group-Service Brake | 1 |
| 11***87 | Hose As | 1 |
115-8488 Pump Gp-Hand
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
| 11***20 | Pump | 1 |
| 11***21 | Valve-Check | 2 |
1g-9759 Valve Gp-Brake & Shift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1G***76 | Valve Group-Check; (Brake Control) | 1 |
| 1G***78 | Locknut | 1 |
116-0043 Valve Gp-Brake Control
| 11***28 | Connector | 1 |
| 11***43 | Valve Group-Brake Control | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
Cooling System
146-0001 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 14***01 | Connection Group-Water | 1 |
114-4361 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***50 | Clamp-Hose | 6 |
| 10***19 | Clip | 1 |
186-5381 Cooler Gp-Fltr Base & Eng Oil
| 06***66 | Washer | 2 |
| 10***73 | Bolt; (M10x1.5x60-mm) | 2 |
| 11***44 | Head As-Oil Filter; (Engine) | 1 |
137-4546 Fan Gp
| 10***14 | Fan-Blower | 1 |
| 13***69 | Extension-Fan | 1 |
| 13***46 | Fan Group | 1 |
142-0524 Fan Gp-Blower
| 10***14 | Fan-Blower | 1 |
| 14***24 | Fan Group-Blower | 1 |
| 14***94 | Guard As-Fan | 2 |
112-7904 Fan Gp-Blower
| 11***04 | Fan Group-Blower | 1 |
| 11***43 | Fan-Blower | 1 |
| 12***35 | Guard As-Fan | 1 |
6i-4040 Lines Gp-Water
| 10***89 | Clamp-Hose | 2 |
| 13***54 | Connector As | 1 |
| 13***56 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
139-0642 Plug Gp-Water Lines
| 10***87 | Plug | 16 |
| 13***70 | Plug | 4 |
| 13***42 | Plug Group-Water Lines | 1 |
6i-4722 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 12***12 | Gear; (18-Teeth) | 1 |
| 6I***44 | Seal | 1 |
6i-4724 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 6I***93 | Bolt; (M8x1.25x80-mm) | 1 |
| 6I***48 | Bolt | 3 |
6i-0441 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 6I***93 | Bolt; (M8x1.25x80-mm) | 1 |
| 6I***41 | Pump Group-Water | 1 |
6i-0442 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 6I***00 | Seal | 1 |
| 6I***42 | Pump Group-Water | 1 |
179-6896 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
149-0539 Pump Gp-Water
| 14***39 | Pump Group-Water | 1 |
| 15***38 | Seal | 1 |
| 20***29 | Seal-O-Ring | 1 |
139-2614 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
133-9550 Pump Gp-Water
| 06***58 | Clamp-Hose | 2 |
| 10***11 | Gasket | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
140-2760 Radiator & Hyd Oil Cooler Gp
| 08***92 | Valve As-Check | 1 |
| 11***48 | Hose; (Lower) | 1 |
| 11***94 | Mount As | 1 |
122-1896 Radiator & Hyd Oil Cooler Gp
| 08***92 | Valve As-Check | 1 |
| 11***48 | Hose; (Lower) | 1 |
| 11***49 | Hose; (Upper) | 1 |
Electrical And Starting System
142-2612 Alternator Gp-Charging
| 11***39 | Spacer; (10.5x18x21-mm Thk) | 1 |
| 14***11 | Strap | 1 |
| 14***12 | Bracket As | 1 |
112-5053 Alternator Gp-Charging
| 10***87 | Bracket | 1 |
| 11***53 | Alternator Group-Charging | 1 |
| 11***01 | Guard As-Alternator | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
105-7631 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 2 |
| 10***31 | Battery & Wiring Group | 1 |
| 10***32 | Strap-Grounding | 1 |
1g-5981 Control Gp-Pump Electronic
| 03***05 | Seal-O-Ring | 1 |
| 10***37 | Gasket | 1 |
| 10***38 | Cover | 1 |
135-4917 Control Gp-Pump Electronic
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 10***14 | Seal-Interface | 1 |
| 13***17 | Control Group-Pump Electronic | 1 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
104-2956 Electrical Ar
| 10***56 | Electrical Ar | 1 |
| 10***31 | Battery & Wiring Group | 1 |
| 10***33 | Wiring Group-Machine | 1 |
123-8656 Electrical Ar
| 10***31 | Battery & Wiring Group | 1 |
| 10***33 | Wiring Group-Machine | 1 |
| 12***56 | Electrical Ar | 1 |
9x-1439 Lamp Gp-Flood -Vertical
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***39 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 9X***55 | Body As-Lamp | 1 |
162-3294 Lamp Gp-Flood -Vertical Mount
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
117-8319 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***19 | Lamp Group-Registration Plate; -Eu | 1 |
| 13***49 | Screw-Lens | 2 |
121-2547 Lamp Gp-Signal
| 08***42 | Lamp Group; (Signal-Front) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***47 | Lamp Group-Signal | 1 |
127-1558 Lamp Gp-Signal
| 12***05 | Harness As-Lighting; (Signal) | 1 |
| 12***58 | Lamp Group-Signal | 1 |
| 12***59 | Lamp; (Running Lt, Stop, Turn Sig, Rh) | 1 |
127-1561 Lamp Gp-Signal
| 12***06 | Harness As-Lighting; (Signal) | 1 |
| 12***60 | Lamp; (Running Lt, Stop, Turn Sig, Lh) | 1 |
| 12***61 | Lamp Group-Signal | 1 |
121-5903 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Lamp; (Front, Lh)(Running/Turn Signal) | 1 |
121-5904 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***50 | Lamp; (Front, Rh)(Running/Turn Signal) | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
146-8387 Lamp Gp-Warning Beacon
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
| 14***87 | Lamp Group-Warning Beacon | 1 |
5e-6579 Lighting Gp-Flood
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
| 5E***79 | Lighting Group | 1 |
| 5E***99 | Lead As | 2 |
140-8097 Lighting Gp-Flood
| 14***97 | Lighting Group-Flood | 1 |
| 2H***20 | Lockwasher (11.38mm Id) | 2 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
112-3204 Lighting Gp-Flood
| 11***04 | Lighting Group-Flood | 1 |
| 11***41 | Harness As | 1 |
| 12***56 | Bracket-Guard | 2 |
140-8098 Lighting Gp-Flood
| 12***98 | Harness As-Wiring | 1 |
| 14***98 | Lighting Group-Flood | 1 |
| 1A***21 | Grommet | 2 |
120-8201 Lighting Gp-Flood
| 12***98 | Harness As-Wiring | 1 |
| 12***01 | Lighting Group-Flood | 1 |
| 1A***21 | Grommet | 4 |
135-3219 Lighting Gp-Roading
| 08***55 | Nut | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***49 | Lamp Group-Head & Signal; -Lh | 1 |
130-2475 Lighting Gp-Signal
| 12***06 | Mount As | 4 |
| 12***47 | Lamp Group-Signal | 4 |
| 12***07 | Housing As-Switch | 1 |
081-4135 Regulator Gp-Voltage
| 08***02 | Washer | 1 |
| 08***01 | Screw | 1 |
| 08***44 | Rotary Eccentric Relay | 1 |
120-3885 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***85 | Sensor Group | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
124-7706 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***85 | Clip | 2 |
152-7787 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***54 | Clip | 1 |
130-4650 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 13***50 | Starting Aid Group; -Heater | 1 |
108-9621 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
143-0541 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
1g-9963 Starting Motor Gp-Electric
| 10***29 | Starting Motor Group-Electric | 1 |
| 1G***63 | Starting Motor Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
100-6929 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
137-2666 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 13***66 | Switch Group-Pressure; -Engine Oil | 1 |
| 25***10 | Switch As-Pressure; (Engine Oil) | 1 |
9g-7641 Switch Gp-Start
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
108-3190 Switch Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***90 | Switch Group-Temperature; -Engine Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
106-0569 Warning Gp-Backup
| 10***69 | Warning Group-Backup | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
159-3859 Wiring Gp-Air Conditioner
| 15***08 | Plate | 1 |
| 15***09 | Plate | 1 |
| 15***17 | Button | 2 |
114-8619 Wiring Gp-Cab
| 11***19 | Wire As | 1 |
| 11***20 | Wire As | 2 |
| 11***21 | Harness As | 1 |
116-0651 Wiring Gp-Cab
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***33 | Console Group-Instrument | 1 |
| 10***35 | Console Group-Operator | 1 |
141-7891 Wiring Gp-Cab
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
105-7633 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
147-4489 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
140-3695 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
105-7629 Wiring Gp-Platform
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***29 | Wiring Group-Platform | 1 |
| 10***33 | Console Group-Instrument | 1 |
141-7801 Wiring Gp-Platform
| 10***12 | Seal; (Interface) | 1 |
| 10***35 | Console Group-Operator | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 14 |
138-4376 Wiring Gp-Secondary Steering
| 13***72 | Harness As-Power | 1 |
| 13***73 | Harness As-Steering | 1 |
| 13***74 | Harness As-Panel | 1 |
Engine Arrangement
137-4829 Engine Ar
| 11***70 | Engine Ar-Primary | 1 |
| 13***46 | Fan Group | 1 |
| 13***47 | Muffler Group | 1 |
100-8184 Engine Ar
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***21 | Flywheel Group | 1 |
| 10***84 | Engine Ar | 1 |
130-4800 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
116-2870 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 10***76 | Filter Group-Fuel | 1 |
| 10***52 | Cylinder Head Group | 1 |
140-3688 Installation Ar-Engine
| 10***06 | Control Group-Direction & Speed | 1 |
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 11***54 | Mounting Group-Engine | 1 |
112-1989 Installation Ar-Engine
| 10***96 | Muffler Group | 1 |
| 10***97 | Air Cleaner Group | 1 |
| 10***04 | Lines Group-Fuel | 1 |
Frame And Body
112-2055 Bumper Gp
| 11***55 | Bumper Group | 1 |
| 11***83 | Scraper Group-Padded Drum | 1 |
| 11***16 | Shim | 6 |
180-4030 Bumper Gp-Drum
| 18***26 | Scraper Group-Padded Drum | 1 |
| 18***30 | Bumper Group-Drum | 1 |
| 19***22 | Shim | 4 |
171-4691 Bumper Gp-Drum
| 17***91 | Bumper Group-Drum | 1 |
| 17***92 | Bumper As | 1 |
| 8T***01 | Nut (M24 X 3 Thd); (M24x3.00 Thd) | 4 |
175-0397 Bumper Gp-Drum
| 17***97 | Bumper Group-Drum | 1 |
| 17***71 | Scraper Group-Padded Drum | 1 |
| 8T***01 | Nut (M24 X 3 Thd); (M24x3.00 Thd) | 4 |
180-0632 Bumper Gp-Drum
| 18***32 | Bumper Group-Drum | 1 |
| 18***34 | Scraper Group-Padded Drum | 1 |
| 19***22 | Shim | 4 |
111-9815 Bumper Gp-Drum
| 11***15 | Bumper Group-Drum | 1 |
| 11***16 | Bumper As | 1 |
| 11***16 | Shim | 6 |
178-9144 Bumper Gp-Drum
| 17***44 | Bumper Group-Drum | 1 |
| 17***45 | Bumper As | 1 |
| 8T***01 | Nut (M24 X 3 Thd); (M24x3.00 Thd) | 4 |
171-9634 Bumper Gp-Front
| 16***12 | Scraper | 12 |
| 16***19 | Scraper | 2 |
| 17***34 | Bumper Group-Front | 1 |
117-6064 Cowling Gp
| 11***64 | Cowling Group | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 12 |
133-0625 Cowling Gp
| 13***24 | Cowling As | 1 |
| 13***25 | Cowling Group | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 12 |
118-0511 Door Gp-Access
| 11***11 | Door Group-Access | 1 |
| 13***79 | Door As | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 8 |
118-0509 Door Gp-Access
| 11***09 | Door Group-Access | 1 |
| 13***78 | Door As | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 11 |
112-2056 Enclosure Gp-Engine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 09***12 | Bumper Plug, Rubber | 2 |
| 10***76 | Panel-Rear-Lh | 1 |
105-7609 Enclosure Gp-Engine
| 09***12 | Bumper Plug, Rubber | 2 |
| 10***09 | Enclosure Group-Engine | 1 |
| 10***47 | Grill As | 1 |
141-6962 Enclosure Gp-Engine
| 09***12 | Bumper Plug, Rubber | 2 |
| 10***64 | Door As | 1 |
| 10***66 | Door As | 1 |
113-8482 Frame As-Main
| 11***82 | Frame As-Main | 1 |
| 12***56 | Plate | 2 |
| 13***82 | Plate | 2 |
112-1855 Frame Gp
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 10***24 | Bushing-Spring | 2 |
| 10***25 | Bushing-Spring | 2 |
172-8825 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 10***24 | Bushing-Spring | 2 |
| 10***25 | Bushing-Spring | 2 |
132-9762 Grill Gp-Radiator
| 13***61 | Grill As | 1 |
| 13***62 | Grill Group-Radiator | 1 |
| 13***94 | Insulation | 1 |
118-0508 Grill Gp-Radiator
| 11***08 | Grill Group-Radiator | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 32 |
180-4026 Scraper Gp-Padded Drum
| 07***32 | Tip | 16 |
| 07***33 | Pin-Flexible | 16 |
| 10***50 | Bar | 8 |
175-2271 Scraper Gp-Padded Drum
| 07***32 | Tip | 12 |
| 07***33 | Pin-Flexible | 12 |
| 17***71 | Scraper Group-Padded Drum | 1 |
180-0634 Scraper Gp-Padded Drum
| 07***32 | Tip | 16 |
| 07***33 | Pin-Flexible | 16 |
| 10***50 | Bar | 8 |
138-6123 Scraper Gp-Padded Drum
| 07***32 | Tip | 8 |
| 07***33 | Pin-Flexible | 8 |
| 13***23 | Scraper Group-Padded Drum | 1 |
183-5771 Scraper Gp-Padded Drum
| 13***23 | Scraper Group-Padded Drum | 1 |
| 18***34 | Yoke As-Blade | 1 |
| 18***71 | Scraper Group-Padded Drum | 1 |
112-3583 Scraper Gp-Padded Drum
| 07***32 | Tip | 16 |
| 07***33 | Pin-Flexible | 16 |
| 11***94 | Scraper As | 1 |
107-3949 Scraper Gp-Smooth Drum
| 10***48 | Scraper | 2 |
| 10***94 | Bar-Adjustment | 4 |
| 10***95 | Plate | 2 |
183-5764 Scraper Gp-Smooth Drum
| 10***48 | Scraper | 2 |
| 10***94 | Bar-Adjustment | 4 |
| 10***95 | Plate | 2 |
105-7620 Scraper Gp-Smooth Drum
| 10***20 | Scraper Group-Smooth Drum | 1 |
| 10***94 | Bar-Adjustment | 4 |
| 10***97 | Scraper | 1 |
Fuel System
101-3376 Filter Gp-Fuel
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***76 | Filter Group-Fuel | 1 |
| 13***96 | Filter Group-Fuel | 1 |
148-5456 Filter Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 4 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
105-7604 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 10***25 | Separator Group-Water | 1 |
| 10***86 | Bracket | 1 |
143-4056 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 10***86 | Bracket | 1 |
| 10***87 | Tube As | 1 |
101-3900 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
| 03***93 | Ferrule | 2 |
114-4336 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
101-3885 Lines Gp-Fuel Injection
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***12 | Bolt | 3 |
| 06***80 | Bolt; (M8x1.25-Thd) | 1 |
115-1163 Pump Gp-Fuel Injection
| 10***86 | Kit-Pump Gasket; (Fuel Injection Pump) | 1 |
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 11***64 | Housing | 1 |
114-4340 Pump Gp-Fuel Injection
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 11***64 | Housing | 1 |
| 11***70 | Bolt | 2 |
114-4341 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
167-1179 Pump Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
115-1166 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
6i-0570 Pump Gp-Fuel Transfer
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 12***20 | Pump Group-Fuel Transfer | 1 |
101-3782 Pump Gp-Fuel Transfer
| 03***37 | Kit-Pump; (Fuel Transfer) | 1 |
| 10***82 | Pump Group-Fuel Transfer | 1 |
| 12***20 | Pump Group-Fuel Transfer | 1 |
101-3925 Separator Gp-Water
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
101-3924 Separator Gp-Water
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 10***24 | Separator Group-Water | 1 |
131-5114 Spring Gp-Governor
| 03***82 | Spring | 1 |
| 12***30 | Bracket | 1 |
| 13***14 | Spring Group-Governor | 1 |
105-7615 Tank & Mtg Gp-Fuel
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
Hydraulic System
111-8993 Cap & Strainer Gp-Hyd Oil Fill
| 11***93 | Cap & Strainer Group-Hydraulic Oil Fill | 1 |
| 3G***61 | Gasket | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
1g-7089 Cylinder Gp-Hydraulic
| 03***69 | Bearing | 1 |
| 07***02 | Wire, Lock | 1 |
| 1G***89 | Cylinder As-Hydraulic | 1 |
112-6220 Cylinder Gp-Hydraulic
| 03***69 | Bearing | 1 |
| 07***02 | Wire, Lock | 1 |
| 08***23 | Seal | 1 |
138-2274 Cylinder Gp-Hydraulic
| 07***02 | Wire, Lock | 1 |
| 07***85 | Washer | 1 |
| 07***69 | Fitting, Grease | 1 |
105-7652 Filter & Mtg Gp-Hydraulic
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 08***94 | Indicator As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
122-1786 Filter Gp-Oil
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
133-5343 Filter Gp-Oil
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
077-5200 Gauge Gp-Sight
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
104-2962 Hydraulic Ar-Auxiliary
| 10***62 | Hydraulic Ar-Auxiliary | 1 |
| 10***51 | Cylinder & Mtg Group-Steering | 1 |
| 10***52 | Filter & Mtg Group-Hydraulic | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
105-7653 Lines Gp-Auxiliary Hydraulic
| 10***53 | Lines Group-Auxiliary Hydraulic | 1 |
| 10***82 | Hose As | 1 |
| 13***23 | Hose As | 1 |
174-1479 Lines Gp-Control
| 10***82 | Hose As | 1 |
| 10***84 | Hose As | 1 |
| 10***85 | Hose As | 1 |
111-8128 Lines Gp-Flushing
| 10***69 | Hose As | 2 |
| 10***70 | Hose As | 2 |
| 11***33 | Hose As | 1 |
148-8241 Lines Gp-Flushing
| 10***69 | Hose As | 2 |
| 10***70 | Hose As | 2 |
| 11***33 | Hose As | 1 |
105-7655 Lines Gp-Hydraulic Filter
| 10***55 | Lines Group-Hydraulic Filter | 1 |
| 10***80 | Hose As | 1 |
| 10***61 | Hose As | 1 |
148-8253 Lines Gp-Hydraulic Filter
| 10***61 | Hose As | 1 |
| 11***34 | Hose As | 1 |
| 12***12 | Hose As | 2 |
111-8127 Lines Gp-Hydraulic Oil Cooler
| 10***20 | Hose As | 1 |
| 10***78 | Hose As | 1 |
| 10***79 | Hose As | 1 |
111-8129 Lines Gp-Pilot
| 10***70 | Hose As | 3 |
| 10***72 | Hose As | 1 |
| 11***29 | Lines Group-Pilot | 1 |
105-5026 Motor Gp-Gear
| 05***23 | Dowel | 4 |
| 07***93 | Valve As | 2 |
| 10***26 | Motor Group-Gear | 1 |
109-3010 Motor Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 10***10 | Motor Group-Piston | 1 |
| 11***21 | Plug-Special | 2 |
111-0902 Motor Gp-Piston
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
| 10***53 | Bearing | 2 |
| 11***21 | Plug-Special | 2 |
105-5025 Pump Gp-Gear
| 10***25 | Pump Group-Gear | 1 |
| 11***94 | Seal-Backup | 2 |
| 11***95 | Seal | 2 |
127-5014 Pump Gp-Gear
| 11***95 | Kit-Pump | 1 |
| 11***01 | Gear-Helical | 1 |
| 11***02 | Nut-Sleeve | 1 |
105-2281 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***05 | Seal-O-Ring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
145-8687 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 11***23 | Kit-Relief Shim; (Propel Motor) | 1 |
| 11***35 | Carrier-Shaft | 1 |
145-3623 Pump Gp-Piston
| 07***75 | Shim | 1 |
| 07***25 | Switch; (Neutral) | 1 |
| 08***53 | Bolt; (1/4-20x0.62-In) | 4 |
159-9836 Pump Gp-Piston
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 14***89 | Pump Group-Piston | 1 |
| 15***36 | Pump Group-Piston | 1 |
122-0595 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
| 07***75 | Shim | 1 |
122-0594 Pump Gp-Piston
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 12***94 | Pump Group-Piston | 1 |
| 12***95 | Pump Group-Piston | 1 |
105-2282 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 2 |
| 07***75 | Shim | 1 |
145-8689 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 11***23 | Kit-Relief Shim; (Propel Motor) | 1 |
| 11***23 | Spring | 1 |
105-7617 Tank & Mtg Gp-Hydraulic
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 10***17 | Tank & Mtg Group-Hydraulic | 1 |
| 10***65 | Tank As-Hydraulic | 1 |
141-6964 Tank & Mtg Gp-Hydraulic
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***51 | Strap As-Hydraulic Tank | 2 |
112-3074 Valve & Mtg Gp-Blade
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 20***22 | Control Group-Blade | 1 |
| 2N***80 | Screw-Head; (1/4-20x0.75-In) | 2 |
111-8274 Valve & Mtg Gp-Bypass
| 11***74 | Valve & Mtg Group-Bypass | 1 |
| 11***75 | Valve-Bypass; (Hydraulic Oil Cooler) | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 3 |
116-0042 Valve & Mtg Gp-Flushing
| 11***75 | Valve-Needle | 1 |
| 11***76 | Elbow | 1 |
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
105-7649 Valve & Mtg Gp-Flushing
| 10***49 | Valve & Mtg Group-Flushing | 1 |
| 10***15 | Valve Group-Flushing | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7x-8382 Valve Gp-Control
| 11***07 | Kit-Detent; (Valve Control) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 5L***18 | Bolt-Socket Head; (1/4-20x1.75-In) | 4 |
109-5915 Valve Gp-Flushing
| 08***89 | Valve; (Charge Relief) | 1 |
| 10***51 | Valve Group-Shuttle | 1 |
| 10***15 | Valve Group-Flushing | 1 |
Implements
178-8447 Blade Ar
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***81 | Yoke As-Blade | 1 |
178-8446 Blade Ar
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***81 | Yoke As-Blade | 1 |
178-8090 Blade Gp
| 07***70 | Bushing-Terminal | 1 |
| 12***78 | Washer; (25.5x85x12-mm Thk) | 4 |
| 13***74 | Cylinder Group-Hydraulic | 1 |
175-2269 Blade Gp
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***49 | Blade Group-Leveling | 1 |
| 17***79 | Lines Group-Control | 1 |
172-7949 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 11***79 | Spacer | 4 |
| 12***78 | Washer; (25.5x85x12-mm Thk) | 4 |
189-6234 Blade Gp-Leveling
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***71 | Plate As | 1 |
189-6235 Blade Gp-Leveling
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***71 | Plate As | 1 |
Lubrication System
114-4365 Filler Gp-Engine Oil
| 11***02 | Filler As | 1 |
| 11***03 | Cap; (Engine Oil Fill) | 1 |
| 11***04 | Seal-O-Ring | 1 |
119-1715 Filter Gp-Engine Oil
| 03***62 | Plug | 1 |
| 06***06 | Plug | 1 |
| 11***15 | Filter Group-Engine Oil | 1 |
101-3448 Fumes Disposal Gp
| 10***48 | Fumes Disposal Group | 1 |
| 10***49 | Hose; (Crankcase Breather) | 1 |
| 10***50 | Clamp-Hose | 1 |
108-8410 Gauge Gp-Oil Level (Dipstick)
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 12***47 | Gauge As-Oil Level (Dipstick) | 1 |
| 12***49 | Tube As | 1 |
114-2376 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***15 | Bolt | 3 |
| 10***12 | Tube | 1 |
139-4670 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
6i-0252 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
6i-0911 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
Machine Arrangement
172-8837 Chassis Ar
| 10***12 | Plate & Film Group; -English | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
| 14***62 | Enclosure Group-Engine | 1 |
112-2057 Chassis Ar
| 10***09 | Enclosure Group-Engine | 1 |
| 10***12 | Plate & Film Group; -English | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
172-8838 Chassis Ar
| 10***14 | Plate & Film Group | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
| 10***20 | Scraper Group-Smooth Drum | 1 |
112-1858 Chassis Ar
| 10***09 | Enclosure Group-Engine | 1 |
| 10***14 | Plate & Film Group | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
138-4377 Conversion Ar-Roading
| 13***19 | Lighting Group-Roading | 1 |
| 13***77 | Conversion Ar-Roading | 1 |
| 13***48 | Steering Ar | 1 |
172-8841 General Ar
| 10***62 | Hydraulic Ar-Auxiliary | 1 |
| 12***56 | Electrical Ar | 1 |
| 13***00 | Engine Ar-Primary | 1 |
172-8840 General Ar
| 10***62 | Hydraulic Ar-Auxiliary | 1 |
| 12***56 | Electrical Ar | 1 |
| 13***00 | Engine Ar-Primary | 1 |
Operator Station
154-6318 Air Conditioner Ar
| 11***33 | Tube As | 1 |
| 15***74 | Latch-Door | 1 |
| 15***18 | Air Conditioner Ar | 1 |
116-0044 Cab Ar
| 11***70 | Mounting Group-Cab | 1 |
| 11***72 | Lines Group-Cab Heater | 1 |
| 11***73 | Cylinder & Mtg Group-Tilt | 1 |
183-5918 Cab Ar
| 11***72 | Lines Group-Cab Heater | 1 |
| 11***44 | Seat Group | 1 |
| 12***36 | Lines Group-Steering | 1 |
123-3878 Cab Gp
| 08***67 | Lamp; (24-Volt, 5-Watt) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***23 | Collar | 2 |
159-3860 Compressor Gp-Refrigerant
| 08***69 | Bolt-Socket Head; (M10x1.5x130-mm) | 1 |
| 15***70 | Compressor Group-Refrigerant | 1 |
| 15***10 | Bracket | 2 |
159-3867 Condenser & Mtg Gp-Refrigerant
| 08***00 | Lockwasher; (2.3mm Thk) | 4 |
| 15***71 | Condensor | 1 |
| 15***04 | Bracket | 1 |
140-3691 Console Gp-Instrument
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
| 10***08 | Film-Instrument | 0 |
109-1033 Console Gp-Instrument
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
| 10***33 | Console Group-Instrument | 1 |
126-3629 Console Gp-Operator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
109-1035 Console Gp-Operator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
| 10***35 | Console Group-Operator | 1 |
128-6558 Console Gp-Operator
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***35 | Console Group-Operator | 1 |
| 12***58 | Console Group-Operator | 1 |
121-6951 Console Gp-Operator
| 03***32 | Board As-Terminal | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
105-7606 Control Gp-Direction & Speed
| 03***77 | Ball Joint | 1 |
| 07***17 | Switch, Neutral Start; (Secondary Brake/Neutral Pump) | 1 |
| 10***06 | Control Group-Direction & Speed | 1 |
7r-3147 Control Gp-Blade -Lever
| 12***21 | Kit-Cable | 1 |
| 1B***02 | Nut (.3125" Diameter); Nut-- Generator Line Leads | 2 |
| 1B***30 | Nut-- Flame Arrestor Or Adapter To Pipe Assembly | 2 |
132-8895 Cylinder & Mtg Gp-Tilt
| 08***19 | Seal-Rubber | 2 |
| 08***72 | Lever | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 2 |
115-8073 Cylinder & Mtg Gp-Tilt
| 06***51 | Clamp | 1 |
| 08***19 | Seal-Rubber | 2 |
| 08***96 | Adapter | 2 |
111-2548 Door Gp-Cab
| 10***41 | Handle | 1 |
| 10***44 | Latch As-Rotary | 1 |
| 11***26 | Window Group-Cab | 1 |
159-3836 Evaporator Gp-Refrigerant
| 15***72 | Evaporator Group-Refrigerant | 1 |
| 15***36 | Evaporator Group-Refrigerant | 1 |
| 15***53 | Bracket-Lh | 1 |
153-2672 Evaporator Gp-Refrigerant
| 15***72 | Evaporator Group-Refrigerant | 1 |
| 15***46 | Evaporator | 1 |
| 15***49 | Valve | 1 |
159-3868 Filter Gp-Cab Air
| 15***00 | Filter Element As-Cab Air | 1 |
| 15***15 | Bracket | 1 |
| 15***68 | Filter Group-Cab Air | 1 |
119-7867 Gauge Gp-Vibratory
| 10***89 | Guard-Magneto Sensor | 1 |
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 11***67 | Gauge Group-Vibratory | 1 |
153-9756 Gauge Gp-Vibratory
| 12***32 | Tachometer; (-Instrument) | 1 |
| 13***80 | Harness As-Sensor; (Vibratory) | 1 |
| 15***07 | Guard-Sensor | 1 |
108-7735 Guard Gp-Vandalism
| 10***51 | Cover | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 1G***95 | Bolt | 2 |
1g-6588 Control Gp-Handle
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***19 | Switch-Push Button; (Vibratory Select On/Off) | 1 |
| 10***21 | Cap | 1 |
1g-3752 Heater Gp-Cab
| 1G***52 | Heater Group-Cab | 1 |
| 1G***53 | Core As | 1 |
| 1G***72 | Turbine Group-Heater | 1 |
136-7204 Kit-Cab Mount
| 13***34 | Spacer | 2 |
| 13***37 | Bracket | 1 |
| 13***38 | Bracket | 1 |
7r-6606 Lever Gp-Propel
| 09***02 | Swivel | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 1 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
111-1366 Lever Gp-Propel
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
| 11***66 | Lever Group-Propel | 1 |
135-2929 Module Gp-Warning Indicator -Engine Temperature
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 13***29 | Lighting Group-Warning; -Engine Temperature | 1 |
159-3834 Lines Gp-Air Conditioner
| 15***75 | Hose As | 1 |
| 15***76 | Hose As | 1 |
| 15***77 | Hose As | 1 |
115-8072 Lines Gp-Cab Heater
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
124-7491 Mirror Gp-Rear View
| 12***91 | Mirror Group-Rear View | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
125-6573 Module Gp-Speed & Vibratory
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
197-5336 Module Gp-Speed & Vibratory
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
133-9645 Mounting Gp-Cab
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***89 | Panel | 1 |
| 11***72 | Panel-Front-Lh | 1 |
115-8070 Mounting Gp-Cab
| 08***97 | Washer | 2 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***51 | Mount As | 1 |
159-2040 Mounting Gp-Cab
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***89 | Panel | 1 |
| 13***34 | Spacer | 2 |
104-2955 Operator Ar
| 10***55 | Operator Ar | 1 |
| 10***24 | Control Group-Steering | 1 |
| 10***26 | Lines Group-Steering | 1 |
176-0345 Operator Ar
| 10***24 | Control Group-Steering | 1 |
| 10***26 | Lines Group-Steering | 1 |
| 10***28 | Seat Group | 1 |
141-7800 Operator Ar
| 10***24 | Control Group-Steering | 1 |
| 10***26 | Lines Group-Steering | 1 |
| 10***28 | Seat Group | 1 |
175-3178 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
105-7627 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 10***27 | Platform Group-Operator | 1 |
| 10***26 | Platform As-Operator | 1 |
159-2776 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 10***80 | Boss | 1 |
| 10***26 | Platform As-Operator | 1 |
082-6396 Pump Gp-Cab Tilt
| 08***45 | Kit-Pump Repair | 1 |
| 08***96 | Pump Group-Cab Tilt | 1 |
| 08***27 | Lever-Control | 1 |
105-7621 Rops Gp
| 10***21 | Rops Group | 1 |
| 12***91 | Film-Warning | 1 |
| 22***61 | Rops As | 1 |
8y-6856 Seat Belt Gp
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
105-7628 Seat Gp
| 10***28 | Seat Group | 1 |
| 10***29 | Seat Belt Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
6i-5381 Seat Gp
| 10***40 | Handle-Adjustment; (Lumbar) | 1 |
| 6I***79 | Kit; (Foam Seat) | 1 |
| 6I***80 | Kit-Foam Back; (Seat) | 1 |
9v-8184 Seat Gp-Suspension
| 03***43 | Nut; (5/16-18 Thd) | 4 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 4 |
| 4B***71 | Washer Pump Mounting Plate To Adjusting Strap | 4 |
116-0644 Seat Gp
| 11***43 | Plate | 2 |
| 11***44 | Seat Group | 1 |
| 12***56 | Belt-Tether | 2 |
6c-7314 Seat Gp-Suspension
| 10***38 | Handle; (Reclining-Rh) | 1 |
| 10***39 | Handle-Height & Tilt | 1 |
| 13***31 | Kit-Arm Cushion; (Lh) | 1 |
9c-4449 Seat Gp
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
| 2K***61 | Screw-Machine; (3/8-16x1.5-In) | 1 |
120-8200 Seat Gp-Suspension
| 10***28 | Seat Group | 1 |
| 12***00 | Seat Group-Suspension | 1 |
9v-7924 Suspension Gp-Seat
| 02***24 | Locknut; (1/4-20-Thd) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 12 |
| 2K***11 | Pin (Spring-Outer) | 2 |
4i-9797 Suspension Gp-Seat
| 4I***97 | Suspension Group-Seat | 1 |
| 4I***98 | Damper Assembly. Kit | 1 |
| 8Y***05 | Kit-Bumper | 1 |
1g-3772 Heater Gp-Cab
| 10***98 | Motor | 1 |
| 10***56 | Plate-Base | 1 |
| 10***57 | Hood | 2 |
111-2525 Washer Gp-Window
| 11***25 | Washer Group-Window | 1 |
| 11***63 | Pump As-Washer | 2 |
| 11***88 | Tank As-Window Washer | 1 |
111-2526 Window Gp-Cab
| 11***26 | Window Group-Cab | 1 |
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
111-2529 Window Gp-Cab
| 11***29 | Window Group-Cab | 1 |
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
Power Train
176-7313 Axle & Mtg Gp-Drive
| 17***88 | Axle Group-Drive | 1 |
| 17***13 | Axle & Mtg Group-Drive | 1 |
| 7X***65 | Bolt; (M24x3x180-mm) | 4 |
112-1942 Axle & Mtg Gp-Drive
| 11***42 | Axle & Mtg Group-Drive | 1 |
| 11***49 | Axle Group | 1 |
| 7X***68 | Bolt; (M20x2.5x180-mm) | 4 |
112-3749 Axle Gp
| 03***60 | Cup-Roller Bearing | 2 |
| 05***94 | Washer; (13.46x22.35x2.29-mm Thk) | 44 |
| 07***00 | Stud, Wheel | 24 |
175-2288 Axle Gp-Drive
| 03***60 | Cup-Roller Bearing | 2 |
| 05***94 | Washer; (13.46x22.35x2.29-mm Thk) | 44 |
| 07***00 | Stud, Wheel | 16 |
147-3486 Drive Gp-Drum
| 10***10 | Motor Group-Piston | 1 |
| 10***00 | Seal-O-Ring | 1 |
| 14***50 | Mount | 6 |
105-7639 Drive Gp-Drum
| 07***92 | Mount, Rubber Shock | 6 |
| 10***44 | Plate-Mounting | 1 |
| 10***94 | Plate | 3 |
148-8272 Drum Gp-Drive & Vibratory
| 07***92 | Mount, Rubber Shock | 4 |
| 07***61 | Gasket | 1 |
| 07***04 | Bushing-Terminal | 1 |
153-7151 Drum Gp-Drive & Vibratory
| 14***86 | Drive Group-Drum | 1 |
| 15***51 | Drum Group-Drive & Vibratory | 1 |
| 15***55 | Drive Group-Support & Vibratory | 1 |
149-7711 Drum Gp-Drive & Vibratory
| 14***86 | Drive Group-Drum | 1 |
| 14***10 | Drum Group-Smooth | 1 |
| 14***11 | Drum Group-Drive & Vibratory | 1 |
123-8601 Drum Gp-Padded
| 11***96 | Drum Group-Padded | 1 |
| 12***00 | Drive Group-Vibratory | 1 |
| 12***01 | Drum Group-Padded | 1 |
112-2241 Drum Gp-Padded
| 10***39 | Drive Group-Drum | 1 |
| 11***64 | Drive Group-Vibratory | 1 |
| 11***41 | Drum Group-Padded | 1 |
123-5054 Drum Gp-Padded
| 11***55 | Bumper Group | 1 |
| 11***25 | Shim | 4 |
| 12***54 | Drum Group-Padded | 1 |
153-7160 Drum Gp-Padded
| 15***35 | Housing Group-Eccentric Weight | 1 |
| 15***60 | Drum Group-Padded | 1 |
| 16***34 | Pad-Drum | 108 |
112-3196 Drum Gp-Padded
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 07***64 | Pad | 108 |
| 07***54 | Retainer, Bearing | 2 |
112-1852 Drum Gp-Smooth
| 10***39 | Drive Group-Drum | 1 |
| 11***50 | Drum Group-Smooth | 1 |
| 11***52 | Drum Group-Smooth | 1 |
112-1850 Drum Gp-Smooth
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 07***54 | Retainer, Bearing | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
123-5053 Drum Gp-Smooth
| 10***20 | Scraper Group-Smooth Drum | 1 |
| 11***15 | Bumper Group-Drum | 1 |
| 11***25 | Shim | 4 |
149-7710 Drum Gp-Smooth
| 14***10 | Drum Group-Smooth | 1 |
| 15***35 | Housing Group-Eccentric Weight | 1 |
| 22***89 | Drum As-Smooth | 1 |
123-8602 Drum Gp-Smooth
| 11***50 | Drum Group-Smooth | 1 |
| 12***00 | Drive Group-Vibratory | 1 |
| 12***02 | Drum Group-Smooth | 1 |
112-2035 Hydraulic Ar-Propel
| 10***45 | Motor & Mtg Group-Propel | 1 |
| 10***46 | Pump & Mtg Group-Propel | 1 |
| 10***49 | Valve & Mtg Group-Flushing | 1 |
175-0395 Hydraulic Ar-Propel
| 10***45 | Motor & Mtg Group-Propel | 1 |
| 10***49 | Valve & Mtg Group-Flushing | 1 |
| 10***50 | Valve Group-Propel | 1 |
126-1099 Installation Gp-Drum
| 11***52 | Drum Group-Smooth | 1 |
| 11***25 | Shim | 6 |
| 12***99 | Installation Group-Drum | 1 |
126-1097 Installation Gp-Drum
| 11***41 | Drum Group-Padded | 1 |
| 11***25 | Shim | 6 |
| 12***97 | Installation Group-Drum | 1 |
171-6585 Installation Gp-Drum
| 17***85 | Installation Group-Drum | 1 |
| 17***64 | Shim; (3-mm Thk) | 6 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 12 |
112-3747 Installation Gp-Drum
| 11***47 | Installation Group-Drum | 1 |
| 11***25 | Shim | 6 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
115-3983 Lines Gp-Propel
| 08***56 | Nut | 2 |
| 10***88 | Bar | 5 |
| 10***57 | Clamp-Block | 1 |
173-0361 Lines Gp-Propel
| 10***88 | Hose As | 1 |
| 10***90 | Hose As | 2 |
| 10***64 | Hose As | 1 |
152-5047 Lines Gp-Propel
| 10***88 | Bar | 1 |
| 10***88 | Hose As | 1 |
| 10***90 | Hose As | 2 |
105-7645 Motor & Mtg Gp-Propel
| 03***23 | Bolt-Self Locking; 4.45cm(1.75in)Lg Ea | 2 |
| 10***45 | Motor & Mtg Group-Propel | 1 |
| 11***02 | Motor Group-Piston | 1 |
210-7756 Planetary Gp-Final Drive
| 09***52 | Ring | 1 |
| 09***31 | Bolt; (Socket Head) (M10x1.5x120mm) | 32 |
| 13***64 | Disc-Friction | 3 |
109-3009 Planetary Gp-Final Drive
| 07***64 | Seal-O-Ring | 1 |
| 10***09 | Planetary Group-Final Drive | 1 |
| 11***62 | Spacer-Thrust | 1 |
179-0585 Planetary Gp-Final Drive
| 09***52 | Ring | 1 |
| 09***31 | Bolt; (Socket Head) (M10x1.5x120mm) | 32 |
| 13***64 | Disc-Friction | 3 |
175-0396 Power Train Ar
| 10***35 | Wheel Group | 1 |
| 15***51 | Drum Group-Drive & Vibratory | 1 |
| 17***85 | Installation Group-Drum | 1 |
171-6588 Power Train Ar
| 10***37 | Wheel & Tire Group | 1 |
| 14***11 | Drum Group-Drive & Vibratory | 1 |
| 17***85 | Installation Group-Drum | 1 |
112-2036 Power Train Ar
| 10***35 | Wheel Group | 1 |
| 11***42 | Axle & Mtg Group-Drive | 1 |
| 11***36 | Power Train Ar | 1 |
112-1854 Power Train Ar
| 10***37 | Wheel & Tire Group | 1 |
| 11***52 | Drum Group-Smooth | 1 |
| 11***54 | Power Train Ar | 1 |
152-3590 Pump & Mtg Gp-Propel
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***10 | Support As-Pump | 1 |
| 10***80 | Adapter | 1 |
105-7646 Pump & Mtg Gp-Propel
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***10 | Support As-Pump | 1 |
| 10***46 | Pump & Mtg Group-Propel | 1 |
183-5706 Shell Gp-Padded
| 16***00 | Shell As | 2 |
| 17***34 | Bumper Group-Front | 1 |
| 18***06 | Shell Group-Padded | 1 |
172-4220 Shell Gp-Padded
| 16***00 | Shell As | 2 |
| 17***34 | Bumper Group-Front | 1 |
| 17***20 | Shell Group-Padded | 1 |
187-2763 Shell Gp-Padded
| 16***00 | Shell As | 2 |
| 17***34 | Bumper Group-Front | 1 |
| 18***63 | Shell Group-Padded | 1 |
105-7650 Valve Gp-Propel
| 10***50 | Valve Group-Propel | 1 |
| 10***19 | Valve Group-Solenoid | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
109-5919 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***19 | Valve Group-Solenoid | 1 |
| 11***45 | Valve Group-Solenoid | 1 |
112-6545 Valve Gp-Solenoid
| 11***45 | Valve Group-Solenoid | 1 |
| 8X***80 | Kit-Solenoid | 1 |
105-7637 Wheel & Tire Gp
| 10***37 | Wheel & Tire Group | 1 |
| 10***97 | Wheel & Tire Group | 2 |
109-9798 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
171-7273 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
109-8011 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
109-9797 Wheel & Tire Gp
| 08***27 | Plug | 1 |
| 10***83 | Wheel | 1 |
| 10***97 | Wheel & Tire Group | 1 |
105-7635 Wheel Gp
| 10***35 | Wheel Group | 1 |
| 10***11 | Wheel & Tire Group | 1 |
| 10***98 | Wheel & Tire Group | 1 |
Service Equipment And Supplies
127-8781 Cart Gp-Filter
| 00***45 | Sleeve | 2 |
| 00***39 | Elbow | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
124-0386 Film Gp
| 12***86 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***59 | Film-Notice; (Starting Procedure) | 1 |
124-0393 Film Gp
| 12***93 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***61 | Film-Notice; (Starting Procedure) | 1 |
124-0390 Film Gp
| 12***90 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***62 | Film-Notice; (Starting Procedure)(Engine Starting) | 1 |
124-0392 Film Gp
| 12***92 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***63 | Film-Notice; (Starting Procedure)(Engine Starting) | 1 |
124-0387 Film Gp
| 12***87 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***60 | Film-Notice; (Starting Procedure)(Engine) | 1 |
114-5205 Film Gp
| 11***05 | Film Group | 1 |
| 3E***58 | Film-Notice; (Starting Procedure) | 1 |
| 5P***44 | Film Warning; On Front Vertical Surface Of Platform On Right Side & Left Side Of Fuel Tank Under The Grab Irons | 2 |
128-4240 Flushing Gp-Drum
| 12***93 | Connector | 1 |
| 12***90 | Valve-Ball | 1 |
| 12***40 | Flushing Group-Drum | 1 |
128-4239 Flushing Gp-Drum
| 00***07 | Elbow; (90 Degree) | 1 |
| 12***88 | Adapter | 1 |
| 12***89 | Valve-Ball | 1 |
128-4238 Flushing Gp-Drum
| 12***93 | Connector | 1 |
| 12***81 | Cart Group-Filter | 1 |
| 12***38 | Flushing Group-Drum | 1 |
105-7614 Plate & Film Gp
| 10***14 | Plate & Film Group | 1 |
| 11***94 | Film; (Cs-433c) | 2 |
| 11***05 | Film Group | 1 |
105-7612 Plate & Film Gp
| 10***12 | Plate & Film Group; -English | 1 |
| 11***05 | Film Group | 1 |
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
Steering System
105-7624 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***43 | Steering Column Group | 1 |
123-2337 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 11***42 | Pump Group-Metering; (Hmu) | 1 |
105-7651 Cylinder & Mtg Gp-Steering
| 03***69 | Bearing | 2 |
| 07***40 | Spacer; (1-mm Thk) | 8 |
| 07***08 | Bushing-Terminal; (16 Ga.) | 8 |
138-6140 Lines Gp-Secondary Steering
| 10***19 | Hose As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
105-7626 Lines Gp-Steering
| 10***26 | Lines Group-Steering | 1 |
| 10***90 | Clamp-Block | 2 |
| 10***87 | Hose As | 1 |
123-2336 Lines Gp-Steering
| 10***66 | Sleeve-Abrasion | 1 |
| 10***90 | Clamp-Block | 1 |
| 12***66 | Bar | 2 |
108-0054 Lines Gp-Steering
| 10***54 | Lines Group-Steering | 1 |
| 11***46 | Hose As | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 8 |
138-6127 Mounting Gp-Accessory Module
| 13***27 | Mounting Group-Accessory Module | 1 |
| 14***00 | Plate As | 1 |
| 14***01 | Pump & Motor Group-Sec Steering | 1 |
105-7654 Pump & Mtg Gp-Steering
| 09***66 | Bolt; (M8x1.25x75-mm) | 1 |
| 10***25 | Pump Group-Gear | 1 |
| 10***54 | Pump & Mtg Group-Steering | 1 |
117-8842 Pump Gp-Metering
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
138-4448 Steering Ar
| 13***76 | Wiring Group-Secondary Steering | 1 |
| 13***48 | Steering Ar | 1 |
| 13***27 | Mounting Group-Accessory Module | 1 |
Vibratory System
153-7155 Drive Gp-Support & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 15***14 | Plate | 1 |
| 15***06 | Bracket | 1 |
123-8600 Drive Gp-Vibratory
| 07***61 | Gasket | 1 |
| 07***04 | Bushing-Terminal | 1 |
| 07***12 | Coupling, Splined | 1 |
112-2164 Drive Gp-Vibratory
| 07***92 | Mount, Rubber Shock | 4 |
| 07***61 | Gasket | 1 |
| 07***04 | Bushing-Terminal | 1 |
1g-8830 Support Gp-Vibratory
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***64 | Seal-O-Ring | 1 |
153-7035 Housing Gp-Eccentric Weight
| 12***39 | Seal | 2 |
| 12***40 | Bearing | 2 |
| 12***24 | Seal-O-Ring | 1 |
171-5851 Hydraulic Ar-Vibratory
| 14***52 | Pump & Mtg Group-Vibratory | 1 |
| 17***51 | Hydraulic Ar-Vibratory | 1 |
| 17***60 | Lines Group-Vibratory | 1 |
122-0592 Hydraulic Ar-Vibratory
| 12***51 | Console Group-Operator | 1 |
| 12***92 | Hydraulic Ar-Vibratory | 1 |
| 12***93 | Pump & Mtg Group-Vibratory | 1 |
116-0045 Hydraulic Ar-Vibratory
| 10***57 | Pump & Mtg Group-Vibratory | 1 |
| 11***85 | Lines Group-Vibratory | 1 |
| 11***45 | Hydraulic Ar-Vibratory | 1 |
173-0360 Lines Gp-Vibratory
| 11***36 | Hose As | 1 |
| 11***63 | Hose As | 1 |
| 13***08 | Clamp As | 4 |
148-8273 Lines Gp-Vibratory
| 10***88 | Bar | 1 |
| 11***36 | Hose As | 1 |
| 11***57 | Clamp | 1 |
115-3985 Lines Gp-Vibratory
| 08***56 | Nut | 2 |
| 10***88 | Bar | 5 |
| 10***38 | Clamp-Half | 2 |
153-7022 Motor & Mtg Gp-Vibratory
| 14***92 | Motor Group-Piston | 1 |
| 15***22 | Motor & Mtg Group-Vibratory | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
148-8252 Pump & Mtg Gp-Vibratory
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
| 12***27 | Harness As-Pump | 1 |
| 14***87 | Pump Group-Piston | 1 |
148-8268 Pump & Mtg Gp-Vibratory
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
| 14***68 | Pump & Mtg Group-Vibratory | 1 |
| 15***36 | Pump Group-Piston | 1 |
105-7657 Pump & Mtg Gp-Vibratory
| 10***84 | Tee-Face Seal | 2 |
| 10***81 | Pump Group-Piston | 1 |
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
122-0593 Pump & Mtg Gp-Vibratory
| 10***84 | Tee-Face Seal | 2 |
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
| 12***93 | Pump & Mtg Group-Vibratory | 1 |
104-8556 Shaft Gp-Eccentric Weight
| 10***56 | Shaft Group-Eccentric Weight | 1 |
| 6V***87 | Plug-Pipe; (1/2 Npf) | 2 |
| 7X***05 | Shot; (Requires 208 Oz Of Shot) | 12 |
147-0333 Shaft Gp-Eccentric Weight
| 14***92 | Shaft | 1 |
| 14***33 | Shaft Group-Eccentric Weight | 1 |
| 18***33 | Shot; (Steel)(10-Kg) | 0 |
159-9405 Support Gp-Vibratory -Drum
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***37 | Seal | 1 |
CS-433C serial number reference
The PIN/serial data plate on the CS-433C is a riveted metal tag mounted on the machine frame, commonly near the front of the chassis by the radiator guard or on the frame rail below the operator platform (some units repeat it on the ROPS post). Read the three-character prefix that ties the unit to a specific production run and drum configuration (CS smooth-drum vs CP padfoot); the digits that follow are the sequential unit number within that run.
| Prefix | Identifies | Notes |
|---|---|---|
| 2JM | CS-433C / CP-433C shared production run (smooth-drum vs padfoot configuration) | Confirmed in the CP-433C/CS-433C parts catalog braking-system section and in the combined CS-431C/CP-433C/CS-433C electrical schematic index. Powered by the Cat 3054 engine. Falls in the 1997-2002 production window reported for this chassis. |
| 3TM | CS-433C / CP-433C shared production run (smooth-drum vs padfoot configuration) | Most commonly seen prefix on surviving CS-433C units. Confirmed in the CS-433C/CP-433C service manual range. Powered by the Cat 3054 turbocharged diesel with hydrostatic drive. Falls in the 1997-2002 production window. |
| 1ZN | CP-433C / CS-433C shared serial break | Appears in the lubrication-system section of the CP-433C/CS-433C parts catalog, Cat 3054 engine. Documented in only one catalog section - confirm with dealer before relying on this break for parts lookups. |
| 1XZ | CS-433C military-spec variant | Named specifically as a CS-433C military machine arrangement, paired with 1FS, Cat 3054 engine. Configuration differs from standard drum units - confirm exact differences with dealer. |
| 1FS | CS-433C military-spec variant | Named specifically as a CS-433C military machine arrangement, paired with 1XZ, Cat 3054 engine. Configuration differs from standard drum units - confirm exact differences with dealer. |
| 4JZ | CP-433C / CS-433C shared production run (padfoot vs smooth-drum configuration) | A propel-pump assembly range in the CP-433C parts catalog ties this serial break to the shared CP/CS-433C production run rather than the separate CS-431C chassis. Cat 3054 engine. Confirm exact drum configuration with dealer. |
| 5BZ | CP-433C / CS-433C shared production run (padfoot vs smooth-drum configuration) | Listed alongside 4JZ in the same propel-pump assembly range in the CP-433C parts catalog, tying it to the shared CP/CS-433C production run rather than CS-431C. Cat 3054 engine. Confirm exact drum configuration with dealer. |
Frequently asked questions
What engine does the Caterpillar CS-433C use?
The CS-433C is powered by the Caterpillar 3054T, a turbocharged four-cylinder diesel rated at roughly 78.3 kW (105 hp) gross. It's a fully mechanical engine - mechanical fuel injection and governing, no ECM or electronic controls - typical of Cat compaction equipment from this era.
What is the operating weight of the Caterpillar CS-433C?
Operating weight runs roughly 6,670 to 6,977 kg (about 14,700 to 15,380 lb), varying by configuration. Base smooth-drum builds sit toward the lower end of that range; heavier-ballast and pad-foot builds run higher.
What replaced the Caterpillar CS-433C?
Caterpillar replaced the CS-433C with the CS/CP-433E generation, which moved to an updated engine and electronically managed, emissions-compliant calibration in place of the mechanical 3054T. The CS-433C itself had succeeded the earlier CS-433B.
What CS-433C owners discuss
Why does the propel system on the CS-433C engage sluggishly or hesitate when shifting?
Slow propel engagement traces to low charge pressure in the piston pump circuit rather than a worn pump. Usual causes: plugged orifices in the propel piston pumps, hydraulic oil that is too cold or too viscous, a plugged charge filter, or a low hydraulic oil level. Listen for the relief valves opening and check charge and propel relief valve settings against the shop manual before condemning a pump. Warm the oil to operating temperature first, and confirm oil level and filter condition — most "bad pump" complaints turn out to be a starved charge circuit.
What causes hard starting or a no-start on the 3054T-powered CS-433C?
The 3054T fitted to this compactor is known for fuel-delivery hard starts rather than outright injection pump failure. Typical culprits are air trapped in the fuel system, a weak or air-locked lift/primer pump, clogged fuel filters, or fuel reaching the top filter but not the injectors. Some units also develop a weeping front shaft seal on the injection pump that lets fuel dilute the engine oil over time, showing up as a rising oil level or fuel smell on the dipstick. Bleed the fuel system fully after any filter or line work before chasing the injection pump itself.
Vibration won't engage, or cuts in and out — what's usually wrong?
Loss of vibration on this machine is usually electrical, not hydraulic or mechanical. Check fuses and the vibration relay first, then inspect the wiring harness and connector pins feeding the vibratory circuit for corrosion or chafing. A worn dash switch or vibration control solenoid can also cause intermittent drop-out. The vibratory mechanism itself tends to be trouble-free if service intervals are kept, so most no-vibe complaints trace back to a connector or switch rather than the exciter.
Is there a known brake switch issue on the CS-433C / CP-433C?
Yes. A contact block problem on the brake switch is a recognized issue across this compactor family, where worn or failed contacts disrupt the brake-related circuit. Because this switch feeds into the park brake and service brake interlock wiring, treat any dash brake warning or odd brake behavior as a switch and contact block inspection item rather than a simple wiring nuisance. Have your dealer verify the brake switch and contact block before returning the machine to service.
What wear pattern should owners watch for on the drum and exciter over time?
On a smooth single-drum compactor like this one, exciter bearings and drum bearings are the components that decide drum life. Neglecting them is what leads to an expensive warped drum rather than a straightforward bearing swap. Watch drum buffer condition, any drift in vibration frequency, and bearing noise or heat. Machines with a documented history of exciter and bearing service hold up well; gaps in that service history are what show up as drum problems on inspection.
What gear oil goes in the drum drive, and can a heavier grade be substituted?
Owners of this compactor have asked about running 80W-90 gear oil in the drum drive where the factory calls for a lighter 75W lubricant. General guidance from gear oil suppliers is that a heavier 80W-90 GL-5 gear oil will work in most final-drive housings outside of extreme cold, but the safer path is matching the viscosity grade specified in the factory service manual for this drive housing rather than assuming interchangeability — propel charge pump priming and cold-weather drive engagement both depend on the oil flowing at the intended viscosity.
What should I check before buying a used CS-433C?
Confirm the serial prefix (2JM or 3TM) so you know which factory manual and parts coverage applies, since the two prefixes span different production runs of this C-series compactor. Then work through: hours and service records with attention to exciter and drum bearing service plus vibration frequency checks; propel response both cold and at operating temperature (a sluggish shift points to the charge circuit, not necessarily a bad pump); vibration engagement and consistency, along with a look at harness connectors for corrosion; brake switch and contact block condition; and the 3054T's starting behavior, since slow crank-to-start or fuel-smelling oil points to lift pump or injection pump seal wear. Have your dealer verify brake and propel hydraulic function on a test drive before finalizing the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CS-433C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.