Caterpillarpaving compactorvibratory compactor
Caterpillar CP-533C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CP-533C is a single-drum vibratory soil compactor, not an asphalt paving roller, despite falling under Cat's SIS "paving compactor" category label. The CP prefix denotes a padfoot (tamping-foot) drum built for cohesive soil and fill compaction; its CS-533C sibling carries a smooth steel drum on the same chassis for granular material and finish work. Power comes from a Cat 3116T turbocharged diesel, a mechanically governed 6.6 liter inline-six rated at 108 kW (145 hp) gross, with flash-code-only diagnostics and no modern engine ECM. Operating weight runs about 10,761 kg (23,722 lb), with a transport length near 5.26 m (17.3 ft), width of 2.29 m (7.5 ft), height of 2.77 m (9.1 ft), and a 2.74 m (9 ft) wheelbase. The C-series sits in the middle of a longer model lineage: earlier first-generation machines carried different serial prefixes ahead of the C-series (identified by 3XN serials), Caterpillar then moved the line through a D-series update, and later replaced it with the CP-533E/CS-533E, which switched to the Cat 3054C engine and more modern electronic controls.
Across the CP-533 family, the biggest engineering break is the shift from the mechanical 3116T of this generation to progressively more electronically managed engines in later generations, culminating in the 3054C-powered E-series. That shift changed diagnostics, emissions compliance, and parts commonality, so C-series machines should be serviced and sourced as their own generation rather than mixed with later-series parts or specs. In the used-equipment and parts market, the CP-533C holds value as a straightforward, low-electronics machine: its mechanical fuel system and basic wiring make it comparatively easy to keep running in the field, and demand centers on drum, vibratory-bearing, and propel-system wear parts rather than engine control components. Buyers should confirm the serial prefix before assuming a spec sheet or parts list from a later series applies to a C-series unit.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CP-533C specifications
Engine
| Engine model | Cat 3116T diesel, turbocharged, water-cooled inline design. This is the C-series powerplant used on CS-533C / CP-533C; the later CP-533E generation switched to a Cat 3054C engine, a different unit not shared with the C-series. |
| Gross power | 108.2 kW (145 hp) |
| Displacement | 6.6 L (402.8 cu in) |
| Cylinders | 6, inline, turbocharged, direct injection |
| Net power / emissions tier | Not published in available factory or dealer documentation for this generation |
Weights
| Operating weight | 10,761 kg (23,722 lb), standard configuration |
| Shipping weight | Not separately published |
| Ground pressure | Not published |
Dimensions
| Transport length (over blade) | 5.26 m (17.26 ft) |
| Overall width over tires | 2.29 m (7.5 ft) |
| Height to top of cab | 2.77 m (9.09 ft) |
| Wheelbase | 2.74 m (8.99 ft) |
| Ground clearance | 483 mm (19.02 in) |
| Drum width | 2130 mm (83.9 in) |
| Drum diameter (pad tip to tip) | 1549 mm (60.99 in) |
| Tire size | 23.1 x 26, 8-ply rating |
Performance
| Maximum travel speed | 12.8 km/h (8 mph); no separate low/high range or reverse figure published for this generation |
| Gradeability | Not published for this generation |
| Vibration frequency | 30 Hz |
| Centrifugal force, high amplitude | 235.8 kN (53,000 lbf) |
| Centrifugal force, low amplitude | 132.1 kN (29,700 lbf) |
Service capacities (summary)
| Fuel tank | 220 L (58.2 gal) |
| Hydraulic system | 110 L (29.1 gal) |
| Engine oil | 20 L (5.3 gal) |
| Cooling system | Not published |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CP-533C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filter) | 20 L (5.4 US gal) | Cat DEO (Diesel Engine Oil) for the Cat 3116T diesel. SAE 15W-40 for standard/warm ambient service; SAE 10W-30 is the preferred grade for this engine family in cooler climates (down to about -20°C/-4°F). Cat DEO SYN or Cat Arctic DEO SYN for sustained sub-zero operation. |
| Cooling system | 38 L (10 US gal) | Cat DEAC (Diesel Engine Antifreeze/Coolant), full-strength or 50/50 premix per climate. Cat ELC (Extended Life Coolant) is Caterpillar's current extended-service coolant for this engine family. |
| Fuel tank | 220 L (58 US gal) — varies by series; the earlier pre-C generation of this platform used a larger tank near 254 L (67 US gal) | No. 2-D diesel fuel meeting Caterpillar's fuel specification; use a winterized/low-temperature blend in cold ambient conditions. |
| Hydraulic system (tank) | 110 L (29 US gal); some lubricant-reference sources list full-system capacity near 117–118 L — treat as the same range | Cat HYDO (Hydraulic Oil), SAE 10W, standard fluid for this hydrostatic-drive compactor. Cat DEO or Cat TDTO are Cat-listed alternates where HYDO is unavailable. |
| Axle, differential & final drives (combined compartment) | 16 L (4.25 US gal) | Cat TDTO (Transmission/Drive Train Oil), SAE 50 for standard ambient; SAE 30 in cooler climates. |
| Vibratory system bearing lube (drum support and eccentric-weight oil-bath bearings) | 55 L (14.5 US gal) | Cat TDTO, SAE 50, matching Caterpillar's vibratory-support and eccentric-weight-housing spec for this compactor family. |
| Grease (chassis, articulation joint & drum-yoke pivot points) | Not a refill quantity — spec only; service per grease-fitting count on the lubrication chart | Cat MPGM (Multipurpose Grease), NLGI 2; a moly-fortified EP 2 grease is called out for heavy-load articulation/pivot pins where specified. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CP-533C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
Servicing the CP-533C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the engine, hydraulic tank, and vibratory eccentric weight housing to catch bearing and ring wear before failure and to justify extending the base 250-hour engine oil interval. The Cat 3116T's crankcase ventilation design is sensitive to oil grade: stick with the specified single-grade CF-4 diesel oil rather than substituting a modern multigrade, or oil consumption and blow-by can climb. Sample coolant annually for additive depletion, and check fuel for water and sediment given the mechanical fuel system's low tolerance for contamination.
Corrective & Common Repairs
Most corrective work on the CP-533C centers on the vibratory drum: eccentric-weight bearing wear shows up as reduced amplitude or growling under load, and worn padfoot shells or tips lose compaction effectiveness and need timely replacement. Hydraulic propel-motor wear is the next common failure point, showing up as sluggish travel speed or reduced drawbar pull on grade. Because this generation predates modern sealed connectors, wiring and sensor corrosion at engine and instrument connectors causes intermittent no-start or gauge faults; clean and dielectric-grease connections during any electrical troubleshooting.
Overhaul & Rebuild Points
Plan a vibratory bearing housing overhaul once amplitude drops or oil samples show metal content, replacing eccentric weight bearings and seals as a set rather than piecemeal. Drum shells and padfoot tips wear to a point where weld build-up no longer holds; budget for a shell or tip exchange once base metal is exposed. The 3116T's turbocharger and injection pump are the usual mid-life rebuild items on high-hour units, alongside propel motor and pump exchange when drift or slow response can't be tuned out.
Seasonal & Environment Servicing
Cold-start aids matter on the mechanically governed 3116T: check the intake air heater or ether-assist system and use winter-grade fuel before freezing weather, since this engine has no electronic cold-start management. In hot, dusty compaction sites, clean the radiator and oil cooler cores more often than the standard interval and inspect padfoot tips for accelerated wear in abrasive soils. During wet seasons, drain the fuel water separator more frequently and keep drum bearing seals and breathers clear of mud packing before storage.
CP-533C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2500 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CP-533C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 55 | No detected faults. The diagnostic lamp flashes this code when the key switch is cycled ON and no active fault is present. | Normal condition, not a fault. Confirms the diagnostic lamp and flash-code circuit work. | No action needed. If an intermittent problem is suspected, connect Cat ET through the service connector to check logged (inactive) codes, since the flash sequence only shows active faults. |
| 13 | Coolant temperature sensor circuit fault (open or shorted signal). | Corroded or damaged connector at the sensor in the thermostat housing, damaged wiring, or a failed sensor. | Inspect the connector and wiring for corrosion or damage, clean and dry the connection, then test sensor resistance against spec and replace if out of range. |
| 21 | Throttle position sensor (TPS) signal out of expected range. | TPS misadjustment, worn sensor, or damaged wiring/connector at the throttle linkage. | Check TPS duty-cycle output at low idle and full throttle against spec, inspect wiring, adjust or replace the sensor if it will not calibrate. |
| 25 | Boost (intake manifold) pressure sensor circuit fault, typically an open circuit. | Failed boost pressure sensor or an open in its wiring harness; can trigger a power derate under load. | Unplug the sensor and jumper-test the harness pins per the service manual procedure; replace the sensor if it fails the test, otherwise repair the harness. |
| 34 (some ECM software levels display 42) | Loss of signal from an engine speed/timing sensor. The code alone does not identify whether it is the camshaft or crankshaft sensor. | Failed cam or crank speed sensor, damaged wiring or connector, or excessive sensor air gap. | Check each speed/timing sensor individually (a scan tool helps identify which one), inspect wiring and air gap, replace the faulty sensor. |
| 46 | Fuel injector actuation/control circuit fault. | Wiring fault in an individual injector solenoid circuit, a failed injector, or an ECM driver problem. | Run a cylinder cutout test to isolate the affected injector, inspect the injector wiring harness, replace the injector if it fails the cutout test. |
| 15 | Oil pressure sensor circuit fault or a genuine low engine oil pressure condition. | Failed sensor or wiring fault, or actual low oil pressure from low oil level, worn pump, or oil quality issues. | Check engine oil level and condition first, then inspect the sensor wiring; replace the sensor if wiring checks out and the condition persists. |
| 01 | Reserved/internal code. It will not flash out on the diagnostic lamp even though it exists in the code table. | Not applicable, this is a housekeeping entry in the flash-code system rather than a field fault. | No troubleshooting required. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CP-533C attachments & work tools
Drum shell conversion kits (padfoot / smooth)
The CP-533C's padfoot drum accepts a bolt-on smooth-drum shell kit for granular soil and finish-grade work, and the smooth-drum CS-533C sister machine in the same platform accepts the reverse padfoot shell kit for cohesive/clay compaction. Kits are sized to the roughly 2100-2400 mm (83-96 in) drum width shared across the C, D and E generations of this 500-series single-drum compactor line and include shell segments, mounting hardware, edge scrapers and bumpers.
Shell-kit mounting method
Shell segments bolt and pin directly to the drum body; there is no hydraulic quick-coupler system like those used on excavator-style work tools. Converting drum type is a mechanical service job done with the machine jacked and the existing shell unbolted, not an in-field quick-attach swap.
Front clearing/leveling blade
A factory front-mounted straight blade option is listed for this compactor size class, adding roughly 0.3 m (1 ft) to overall machine length over the bare-drum figure. It suits light dozing, spreading loose lifts and site cleanup ahead of compaction passes rather than heavy dozing duty; confirm exact actuation (fixed vs hydraulic) and availability for this serial range with a dealer, as documentation is thin on this specific option.
Dual-amplitude vibratory system
The compactor runs a selectable high/low centrifugal force (amplitude) setting from the standard exciter rather than an interchangeable exciter attachment, roughly 235 kN (53,000 lbf) high and 132 kN (29,700 lbf) low, at about 1800 vpm (30 Hz). This is a built-in operator selection, not a bolt-on kit, and draws on the machine's own vibratory drive without a separate auxiliary hydraulic circuit.
Operator platform / ROPS
Compactors in this size class are factory-fitted with a ROPS/FOPS-rated open canopy platform with perimeter handrails and angled footrests. An enclosed cab option is documented for the later E-series machines in this family; availability of an enclosed cab specific to the C-series CP-533C is not confirmed in available literature and should be checked with a dealer.
Running gear / tires
Standard fitment is a single rear traction tire pair sized about 23.1 x 26 in an 8-ply rating, a fitment shared across the CP/CS-533C and -563C family of this platform. No alternate wheel, dual-tire or crawler option is documented for this compactor class.
All CP-533C assemblies by section
Every catalogued assembly group for the Caterpillar CP-533C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
143-9753 Air Cleaner Gp
| 12***46 | Precleaner Group | 1 |
| 14***05 | Bracket | 1 |
| 14***53 | Air Cleaner Group | 1 |
117-2884 Air Cleaner Gp
| 07***26 | Clamp | 3 |
| 11***20 | Tube | 1 |
| 11***84 | Air Cleaner Group | 1 |
6i-2551 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***51 | Air Cleaner Group | 1 |
6i-2278 Cartridge Gp-Turbocharger
| 6I***78 | Cartridge Group-Turbocharger | 1 |
1n-4877 Cover Gp-Inlet Manifold
| 1N***77 | Cover Group-Inlet Manifold | 1 |
| 4W***22 | Cover-Inlet Manifold | 1 |
| 6V***19 | Bolt; (M8x1.25x40-mm) | 20 |
1w-6029 Lines Gp-Air
| 1W***29 | Lines Group-Air | 1 |
| 7C***07 | Elbow | 1 |
| 7C***19 | Hose | 2 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
140-1695 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***22 | Bracket | 1 |
117-2881 Muffler Gp
| 10***75 | Pipe-Exhaust | 1 |
| 10***78 | Bar-Support | 1 |
| 11***40 | Pipe-Exhaust | 1 |
117-2882 Muffler Gp
| 10***97 | Bar-Clamp | 2 |
| 10***98 | Bar-Bracket | 1 |
| 11***40 | Pipe-Exhaust | 1 |
141-6634 Muffler Gp
| 14***95 | Muffler Group | 1 |
| 14***34 | Muffler Group | 1 |
120-8199 Muffler Gp
| 11***82 | Muffler Group | 1 |
| 12***99 | Muffler Group | 1 |
4m-0310 Precleaner Gp
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
| 4M***10 | Precleaner As | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
4p-2120 Turbocharger Gp
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 4P***20 | Turbocharger Group | 1 |
| 4P***84 | Turbocharger Group | 1 |
4p-4682 Turbocharger Gp
| 4P***82 | Turbocharger Group | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
| 7C***26 | Housing (Compression) | 1 |
4p-4684 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***84 | Turbocharger Group | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
Basic Engine
2w-9608 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2W***08 | Camshaft Group-Single | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
7c-0299 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
7e-2986 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
2w-9746 Cylinder Block Gp
| 14***03 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 2W***46 | Cylinder Block Group | 1 |
100-4948 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 10***89 | Cylinder Block As | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
7c-5826 Cylinder Block Gp
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2W***11 | Bearing-Sleeve; (Camshaft) | 1 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
115-4108 Cylinder Head As
| 11***07 | Cylinder Head As | 1 |
| 11***08 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 12 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
115-4165 Cylinder Head Gp
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 11***36 | Seal-Valve Stem | 12 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
158-2203 Drive Gp-Accessory
| 10***69 | Adapter | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 15***03 | Drive Group-Accessory | 1 |
7e-8945 Drive Gp-Accessory
| 13***19 | Seal-Integral; (Integral) | 1 |
| 3G***97 | Seal-Lip Type | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
9y-0608 Drive Gp-Accessory
| 13***19 | Seal-Integral; (Integral) | 1 |
| 7C***89 | Adapter | 1 |
| 9H***72 | Gasket | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
124-8917 Drive Gp-Pump
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 11***76 | Plate-Adapter | 1 |
| 12***17 | Drive Group-Pump | 1 |
112-4722 Drive Gp-Pump
| 07***28 | Plate-Drive; (Drive) | 1 |
| 09***88 | Adapter-Pump | 1 |
| 11***22 | Drive Group-Pump | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***38 | Pulley As-Idler | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
2w-8475 Gear Gp-Front
| 2W***65 | Shaft-Idler | 1 |
| 2W***66 | Bearing-Sleeve | 1 |
| 2W***75 | Gear Group-Front; Front Gear Group | 1 |
115-4175 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***71 | Shaft | 1 |
| 11***72 | Bearing | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
116-7494 Mounting Gp-Engine Flexible
| 10***04 | Mount As | 1 |
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 7X***53 | Bolt-Plt; (5/8unc X 4 1/4) | 2 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
108-5758 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 10***58 | Piston & Rod Group | 1 |
115-4084 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 11***84 | Piston & Rod Group | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
4w-1016 Seal Gp-Crankshaft
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 4W***16 | Seal Group-Crankshaft | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Braking System
119-0546 Lines Gp-Service Brake
| 11***80 | Hose As | 1 |
| 11***81 | Hose As | 1 |
| 11***46 | Lines Group-Service Brake | 1 |
147-2806 Lines Gp-Service Brake
| 14***06 | Lines Group-Service Brake | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
1g-9630 Valve & Mtg Gp-Brake & Shift
| 1G***30 | Valve & Mtg Group-Brake & Shift | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
124-8942 Valve & Mtg Gp-Brake & Shift
| 10***18 | Coil | 2 |
| 12***42 | Valve & Mtg Group-Brake & Shift | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
1g-9759 Valve Gp-Brake & Shift
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***43 | Steering Column Group | 1 |
Cooling System
7c-5467 Adapter Gp-Fan
| 6I***37 | Adapter; (Fan) | 1 |
| 7C***67 | Adapter Group-Fan | 1 |
| 8T***77 | Bolt-Plt; (M8 X 1.25 X 90) | 6 |
4w-2913 Cooler Gp-Engine Oil
| 23***54 | Gasket | 1 |
| 23***55 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 1 |
117-2883 Fan Gp-Blower
| 08***85 | Guard As-Fan | 2 |
| 11***83 | Fan Group-Blower | 1 |
| 1F***50 | Nut Rops Support | 1 |
4w-6620 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 19***39 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
116-7496 Radiator & Hyd Oil Cooler Gp
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 08***98 | Valve, Drain R/6b***63; (Radiator) | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
117-2885 Alternator Gp-Charging
| 11***85 | Alternator Group-Charging | 1 |
| 14***93 | Spacer | 1 |
| 3P***11 | Spacer (11.13mm Thk); (11.13-mm Thk) | 1 |
118-6506 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 2 |
| 11***28 | Cable Assem. | 1 |
| 11***06 | Battery & Wiring Group | 1 |
125-2645 Electrical Ar
| 11***06 | Battery & Wiring Group | 1 |
| 12***45 | Electrical Ar | 1 |
| 12***60 | Wiring Group-Machine | 1 |
116-2614 Electrical Ar
| 11***14 | Electrical Ar | 1 |
| 11***35 | Wiring Group-Engine | 1 |
| 11***06 | Battery & Wiring Group | 1 |
140-2240 Electrical Ar
| 11***06 | Battery & Wiring Group | 1 |
| 12***60 | Wiring Group-Machine | 1 |
| 14***40 | Electrical Ar | 1 |
117-2880 Interlock Gp-Vibr & Throttle
| 10***11 | Switch As-Roller | 1 |
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
140-1738 Interlock Gp-Vibr & Throttle
| 11***16 | Bracket | 1 |
| 11***17 | Bracket | 1 |
| 12***65 | Switch As-Roller; (Bucket Kickout & Positioner)) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
120-8201 Lighting Gp-Flood
| 12***98 | Harness As-Wiring | 1 |
| 12***01 | Lighting Group-Flood | 1 |
| 1A***21 | Grommet | 4 |
7c-4028 Solenoid Gp-Shutoff -Fuel
| 15***52 | Solenoid As; (Fuel Shutoff) | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
160-7396 Solenoid Gp-Throttle -Governor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***96 | Solenoid Group-Throttle; -Governor | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
108-3858 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
207-1511 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
106-8557 Starting Motor Gp-Electric
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 3 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
6v-5720 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
104-7040 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
254-3783 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
118-6508 Warning Gp-Backup
| 11***08 | Warning Group-Backup | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
125-4461 Wiring Gp-Engine
| 05***02 | Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
118-2435 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***11 | Switch As-Pressure; (Engine Oil) | 1 |
146-8302 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
125-4460 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 12***60 | Wiring Group-Machine | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
118-6507 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 11***07 | Wiring Group-Machine | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
125-6726 Wiring Gp-Platform
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***35 | Console Group-Operator | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 14 |
118-3462 Wiring Gp-Platform
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
Engine Arrangement
111-7717 Engine Ar
| 10***32 | Pump Group-Fuel Injection | 6 |
| 10***58 | Piston & Rod Group | 6 |
| 11***17 | Engine Ar | 1 |
116-2612 Installation Ar-Engine
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***12 | Installation Ar-Engine | 1 |
| 11***94 | Mounting Group-Engine Flexible | 1 |
140-1819 Installation Ar-Engine
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***94 | Mounting Group-Engine Flexible | 1 |
| 11***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
Frame And Body
119-0539 Bumper Gp-Drum
| 11***39 | Bumper Group-Drum | 1 |
| 11***40 | Scraper Group-Padded Drum | 1 |
| 1G***05 | Washer; (10-mm Thk) | 8 |
115-4905 Bumper Gp-Drum
| 11***53 | Support As | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 1G***05 | Washer; (10-mm Thk) | 8 |
119-4996 Bumper Gp-Front
| 10***77 | Scraper As | 1 |
| 11***96 | Bumper Group-Front | 1 |
| 1G***05 | Washer; (10-mm Thk) | 8 |
119-5035 Enclosure Gp-Engine
| 11***80 | Guard Group-Radiator | 1 |
| 11***33 | Bar | 1 |
| 11***35 | Sheet-Rubber | 1 |
144-0483 Enclosure Gp-Engine
| 11***80 | Guard Group-Radiator | 1 |
| 11***33 | Bar | 1 |
| 11***35 | Sheet-Rubber | 1 |
119-4997 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 10***24 | Plate | 1 |
129-6393 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 10***24 | Plate | 1 |
142-6940 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 07***36 | Bushing | 2 |
| 10***24 | Plate | 1 |
116-5280 Guard Gp-Radiator
| 11***66 | Grill As | 1 |
| 11***79 | Guard As-Radiator | 1 |
| 11***80 | Guard Group-Radiator | 1 |
087-0776 Guard Gp-Transmission
| 08***76 | Guard Group-Transmission; Guard Gp-Transmission | 1 |
| 3E***61 | Locknut; (5/8-11-Thd) | 4 |
| 7R***49 | Guard As | 1 |
132-7107 Panel Gp-Side
| 11***37 | Pin | 4 |
| 11***37 | Bracket As | 2 |
| 11***39 | Spacer; (11x30x6-mm Thk) | 4 |
115-0533 Scraper Ar-Drum
| 11***33 | Scraper Ar-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 11***06 | Scraper Ar-Drum | 1 |
115-4906 Scraper Ar-Drum
| 11***36 | Scraper Group-Drum; -Front | 1 |
| 11***37 | Scraper Group-Drum; -Rear | 1 |
| 11***06 | Scraper Ar-Drum | 1 |
114-9044 Scraper Gp-Smooth Drum
| 10***10 | Bolt-Carriage | 5 |
| 10***59 | Bracket | 4 |
| 11***44 | Scraper Group-Drum | 1 |
115-0536 Scraper Gp-Smooth Drum -Front
| 10***10 | Bolt-Carriage | 5 |
| 10***60 | Bracket | 4 |
| 11***34 | Plate-Backing | 2 |
115-0537 Scraper Gp-Smooth Drum -Rear
| 11***37 | Scraper Group-Drum; -Rear | 1 |
| 11***80 | Hose As | 1 |
| 11***81 | Hose As | 1 |
122-8038 Scraper Gp-Padded Drum
| 07***32 | Tip | 18 |
| 07***33 | Pin-Flexible | 18 |
| 10***94 | Scraper As-Blade | 1 |
130-8344 Scraper Gp-Padded Drum -Rear
| 10***10 | Bolt-Carriage | 4 |
| 10***59 | Bracket | 4 |
| 11***71 | Scraper-Steel | 1 |
119-0540 Scraper Gp-Padded Drum
| 07***32 | Tip | 18 |
| 07***33 | Pin-Flexible | 18 |
| 11***40 | Scraper Group-Padded Drum | 1 |
086-9532 Scraper Gp-Padded Drum
| 08***96 | Support-Hose | 2 |
| 08***07 | Spacer; (2-mm Thk) | 4 |
| 08***08 | Spacer; (1.6-mm Thk) | 4 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***02 | Base Group-Fuel Filter | 1 |
174-2297 Cable Gp-Governor Control
| 16***12 | Head | 1 |
| 17***97 | Cable Group-Governor Control | 1 |
7w-6989 Control Gp-Fuel Injection
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
| 7W***89 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
183-4680 Control Gp-Governor
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 05***02 | Plug | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
140-9008 Filter & Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***88 | Clamp; (Hose) | 2 |
| 10***89 | Hose As | 1 |
100-6179 Governor Gp-Unit Injector
| 10***79 | Governor Group-Unit Injector | 1 |
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
4p-5512 Governor Gp-Unit Injector
| 13***52 | Governor Group-Unit Injector | 1 |
| 4P***58 | Spring-Low Idle | 1 |
| 4P***74 | Cam-Torque | 1 |
7e-7661 Governor Gp-Unit Injector
| 4P***12 | Governor Group-Unit Injector | 1 |
| 7E***61 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
131-4852 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
118-6505 Lines Gp-Fuel
| 10***68 | Adapter | 2 |
| 11***68 | Hose As | 1 |
| 11***05 | Lines Group-Fuel | 1 |
140-1693 Lines Gp-Fuel
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 10***68 | Adapter | 1 |
| 11***88 | Hose As | 1 |
125-4459 Lines Gp-Fuel
| 10***68 | Adapter | 1 |
| 11***68 | Hose As | 1 |
| 12***59 | Lines Group-Fuel | 1 |
6i-2420 Lines Gp-Fuel Filter
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
8n-5251 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
8n-3365 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
117-2887 Pump Gp-Fuel Priming
| 11***87 | Pump Group-Fuel Priming | 1 |
| 11***20 | Bracket | 1 |
| 8N***51 | Pump Group-Fuel Prime & Prim Filter | 1 |
127-6449 Pump Gp-Fuel Prm & Water Sep
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
102-9797 Tank & Mtg Gp-Fuel
| 00***70 | Nipple-Strainer To Flange | 1 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***97 | Tank & Mtg Group-Fuel | 1 |
124-8950 Tank & Mtg Gp-Fuel
| 00***70 | Nipple-Strainer To Flange | 1 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***51 | Tank Group-Fuel | 1 |
129-1101 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Hydraulic System
178-3886 Actuator Gp-Pump -Vibratory Piston Pump
| 17***86 | Actuator Group-Pump; -Vibratory Piston Pump | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2J***61 | Ring-Retaining | 1 |
087-1788 Cap & Strainer Gp-Hyd Oil Fill
| 07***86 | Lockwire | 1 |
| 08***05 | Seal | 1 |
| 08***80 | Kit-Seal; (Hydraulic Cylinder) | 1 |
7r-7638 Cylinder Gp-Hydraulic -Blade
| 07***02 | Wire, Lock | 1 |
| 07***85 | Washer | 1 |
| 14***68 | Kit-Seal; (Hydraulic Cylinder) | 1 |
109-6705 Cylinder Gp-Hydraulic
| 10***05 | Cylinder Group-Hydraulic | 1 |
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
1g-8877 Filter & Mtg Gp-Hydraulic
| 13***43 | Filter Group-Oil | 1 |
| 1G***77 | Filter & Mtg Group-Hydraulic | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
125-0650 Filter & Mtg Gp-Hydraulic
| 12***50 | Filter & Mtg Group-Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
117-0576 Filter & Mtg Gp-Hydraulic
| 11***76 | Filter & Mtg Group-Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
125-0652 Filter & Mtg Gp-Hydraulic
| 12***87 | Indicator Group-Oil Filter Change | 1 |
| 12***52 | Filter & Mtg Group-Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
122-1786 Filter Gp-Oil
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
133-5343 Filter Gp-Oil
| 13***43 | Filter Group-Oil | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
077-5200 Gauge Gp-Sight -Hydraulic Tank
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***28 | Screw | 2 |
177-0697 Head Gp-Pump -Vibratory Piston Pump
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***28 | Screw | 2 |
| 11***40 | Pin | 2 |
125-2656 Hydraulic Ar-Auxiliary
| 12***56 | Hydraulic Ar-Auxiliary | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
116-2632 Hydraulic Ar-Auxiliary
| 10***77 | Lines Group-Cylinder | 1 |
| 10***04 | Cylinder & Mtg Group-Steering | 1 |
| 11***32 | Hydraulic Ar-Auxiliary | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 11***16 | Seal | 1 |
| 12***69 | Plug | 2 |
| 12***32 | Solenoid | 2 |
128-1069 Kit-Pump Control
| 11***74 | Hose As | 1 |
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***69 | Kit-Pump Control | 1 |
125-3514 Lines Gp-Auxiliary Hydraulic
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
| 11***59 | Hose As | 2 |
117-0549 Lines Gp-Auxiliary Hydraulic
| 11***49 | Lines Group-Auxiliary Hydraulic | 1 |
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***36 | Hose As | 1 |
130-0153 Lines Gp-Blade
| 10***59 | Hose As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***82 | Hose As | 1 |
120-8675 Lines Gp-Blade
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
| 11***59 | Hose As | 1 |
125-0651 Lines Gp-Hydraulic Filter
| 11***66 | Hose As | 1 |
| 11***72 | Hose As | 2 |
| 11***05 | Hose As | 1 |
125-0649 Lines Gp-Hydraulic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 12***39 | Hose As | 1 |
117-2654 Lines Gp-Hydraulic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***78 | Hose As | 1 |
| 11***18 | Tee-Swivel | 1 |
117-4926 Lines Gp-Hydraulic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 11***26 | Lines Group-Hydraulic Filter | 1 |
124-9081 Lines Gp-Hydraulic Oil Cooler
| 10***00 | Kit-Check Valve | 1 |
| 10***23 | Ring-Retaining | 2 |
| 10***24 | Shim; (0.3mm Thk) | 1 |
117-3051 Lines Gp-Hydraulic Oil Cooler
| 11***51 | Lines Group-Hydraulic Oil Cooler | 1 |
| 11***05 | Hose As | 1 |
| 12***37 | Hose As | 1 |
112-7188 Motor Gp-Piston
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
136-8869 Motor Gp-Piston -Vibratory
| 10***54 | Spring | 1 |
| 10***55 | Seal-Shaft | 1 |
| 10***58 | Kit-Seal; (Valve) | 1 |
123-5259 Motor Gp-Piston -Propel, Drum
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 03***41 | Seal-O-Ring | 1 |
| 10***17 | Seal-O-Ring | 1 |
123-5260 Motor Gp-Piston -Propel, Axle
| 09***15 | Ring-Retaining | 1 |
| 10***35 | Cone-Bearing | 1 |
| 10***13 | Bolt | 4 |
108-4090 Motor Gp-Piston
| 10***90 | Motor Group-Propel | 1 |
| 11***21 | Plug-Special | 2 |
| 11***22 | Spring | 2 |
108-4158 Motor Gp-Piston
| 10***58 | Motor Group-Vibratory | 1 |
| 11***73 | Orifice | 1 |
| 12***69 | Shim; (4.05 mm) | 1 |
123-5263 Pump Gp-Gear
| 00***63 | Seal-O-Ring; (55.24mm Id) | 6 |
| 09***15 | Ring-Retaining | 1 |
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
116-7497 Pump Gp-Gear
| 10***54 | Spring | 1 |
| 10***55 | Seal-Shaft | 1 |
| 10***58 | Kit-Seal; (Valve) | 1 |
147-2296 Pump Gp-Hydraulic
| 03***05 | Seal-O-Ring | 2 |
| 07***80 | Handle | 1 |
| 07***53 | Pin; (Spring) | 2 |
147-6188 Pump Gp-Piston
| 08***74 | Nozzle | 2 |
| 11***26 | Pin | 1 |
| 11***28 | Screw | 3 |
117-0438 Pump Gp-Piston
| 00***63 | Seal-O-Ring; (55.24mm Id) | 3 |
| 09***15 | Ring-Retaining | 1 |
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 4 |
123-7316 Pump Gp-Piston
| 11***38 | Pump Group-Piston | 1 |
| 12***16 | Pump Group-Piston | 2 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
159-9453 Pump Gp-Piston
| 15***53 | Pump Group-Piston; -Vibratory | 1 |
| 7R***16 | Kit-Shaft & Bearing | 1 |
| 7R***17 | Cover | 1 |
123-5262 Pump Gp-Piston
| 03***05 | Seal-O-Ring | 2 |
| 07***80 | Handle | 1 |
| 07***53 | Pin; (Spring) | 2 |
116-7498 Pump Gp-Piston
| 03***05 | Seal-O-Ring | 2 |
| 07***80 | Handle | 1 |
| 07***53 | Pin; (Spring) | 2 |
1g-9720 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***05 | Seal-O-Ring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
137-4581 Rotating Gp-Motor -Propel
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
7r-3708 Rotating Gp-Motor
| 11***16 | Screw | 14 |
| 13***83 | Pin-Center | 1 |
| 13***84 | Piston | 7 |
177-0251 Rotating Gp-Pump
| 00***70 | Nipple-Strainer To Flange | 1 |
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
319-6708 Rotating Gp-Pump
| 00***70 | Nipple-Strainer To Flange | 1 |
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
117-2658 Tank & Mtg Gp-Hydraulic
| 11***75 | Valve-Bypass; (Hydraulic Oil Cooler) | 1 |
| 11***58 | Tank & Mtg Group-Hydraulic | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 3 |
125-0656 Tank & Mtg Gp-Hydraulic
| 12***85 | Valve Group-Bypass | 1 |
| 12***13 | Bracket As | 1 |
| 12***56 | Tank & Mtg Group-Hydraulic | 1 |
102-5924 Valve & Mtg Gp-Control
| 10***24 | Valve & Mtg Group-Control | 1 |
| 11***28 | Manifold-Return | 1 |
| 11***21 | Bracket As | 1 |
117-2888 Valve & Mtg Gp-Bypass
| 11***88 | Valve & Mtg Group-Bypass | 1 |
| 2N***80 | Screw-Head; (1/4-20x0.75-In) | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
124-8921 Valve & Mtg Gp-Bypass
| 12***21 | Valve & Mtg Group-Bypass | 1 |
| 2N***80 | Screw-Head; (1/4-20x0.75-In) | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
122-1467 Valve & Mtg Gp-Control
| 11***07 | Kit-Detent; (Valve Control) | 1 |
| 12***67 | Valve & Mtg Group-Control | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
117-0696 Valve & Mtg Gp-Manifold
| 10***17 | Seal-O-Ring | 2 |
| 10***18 | Seal-O-Ring | 3 |
| 11***73 | Orifice | 1 |
7x-8382 Valve Gp-Control
| 11***16 | Orifice | 1 |
| 12***98 | Plug | 1 |
| 13***67 | Poppet-Relief V | 1 |
110-6396 Valve Gp-Flushing
| 10***17 | Seal-O-Ring | 2 |
| 11***96 | Valve Group-Flushing | 1 |
| 12***91 | Plug | 2 |
139-3269 Valve Gp-Flushing -Propel Motor
| 12***94 | Plug; (Break Off) | 2 |
| 13***69 | Valve Group-Flushing; -Propel Motor | 1 |
| 16***57 | Plug | 1 |
139-7747 Valve Gp-Flushing -Propel Motor
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
208-8003 Valve Gp-Pump Control -Vibratory, Fixed Displacement
| 12***34 | Ring-Backup | 1 |
| 17***25 | Pin-Threaded | 1 |
| 17***21 | Nut-Spring | 1 |
177-7122 Valve Gp-Relief
| 12***67 | Valve & Mtg Group-Control | 1 |
| 13***53 | Lines Group-Blade | 1 |
| 13***34 | Blade Group-Leveling | 1 |
112-4634 Valve Gp-Relief
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
126-4494 Valve Gp-Relief -Piston Pump
| 10***24 | Valve & Mtg Group-Control | 1 |
| 12***75 | Lines Group-Blade | 1 |
| 12***67 | Valve & Mtg Group-Control | 1 |
Implements
132-4535 Blade Ar
| 07***70 | Bushing-Terminal | 1 |
| 10***44 | Edge-Cutting | 2 |
| 10***45 | Edge-Cutting; (Mid-Section) | 1 |
120-8674 Blade Ar
| 07***70 | Bushing-Terminal | 1 |
| 10***44 | Edge-Cutting | 2 |
| 10***45 | Edge-Cutting; (Mid-Section) | 1 |
131-2924 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
132-9697 Blade Gp-Leveling
| 07***92 | Mount, Rubber Shock | 4 |
| 10***93 | Motor & Mtg Group-Vibratory | 1 |
| 12***04 | Plate As-Support | 1 |
132-4534 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
122-1500 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 10***10 | Tube As | 2 |
| 10***30 | Hose As | 2 |
Lubrication System
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
7e-3626 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 2 |
6i-4515 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6I***99 | Tube As | 1 |
| 6I***15 | Filler Group-Oil | 1 |
7c-0271 Filter Gp-Engine Oil
| 1R***39 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
6i-2685 Gauge Gp-Oil Level (Dipstick)
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 2 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
166-6543 Gauge Gp-Oil Level (Dipstick)
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 16***43 | Gauge Group-Oil Level (Dipstick) | 1 |
132-2792 Gauge Gp-Oil Level (Dipstick)
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 13***92 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
117-2886 Lines Gp-Engine Oil
| 10***76 | Hose As | 1 |
| 11***86 | Lines Group-Engine Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
1w-6030 Lines Gp-Turbocharger Oil
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
4w-2195 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
Machine Arrangement
144-0511 Chassis Ar
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 11***99 | Plate & Film Group | 1 |
116-2624 Chassis Ar
| 10***97 | Tank & Mtg Group-Fuel | 1 |
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
144-0512 Chassis Ar
| 11***39 | Bumper Group-Drum | 1 |
| 11***98 | Plate & Film Group | 1 |
| 12***50 | Tank & Mtg Group-Fuel | 1 |
116-2625 Chassis Ar
| 10***97 | Tank & Mtg Group-Fuel | 1 |
| 11***25 | Chassis Ar | 1 |
| 11***58 | Tank & Mtg Group-Hydraulic | 1 |
115-5959 General Ar
| 11***17 | Engine Ar | 1 |
| 11***59 | General Ar | 1 |
| 11***12 | Installation Ar-Engine | 1 |
115-5961 General Ar
| 11***17 | Engine Ar | 1 |
| 11***61 | General Ar | 1 |
| 11***12 | Installation Ar-Engine | 1 |
Operator Station
117-9982 Console Gp-Instrument
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
| 11***09 | Panel As-Control | 1 |
109-1035 Console Gp-Operator
| 03***77 | Ball Joint | 1 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
| 10***35 | Console Group-Operator | 1 |
140-1697 Control Gp-Direction & Speed
| 10***89 | Guard-Magneto Sensor | 1 |
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 12***32 | Tachometer; (-Instrument) | 1 |
117-2909 Control Gp-Direction & Speed
| 03***77 | Ball Joint | 1 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 3 |
| 11***50 | Bracket-Cable | 1 |
7r-3147 Control Gp-Blade -Lever
| 03***77 | Ball Joint | 1 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 3 |
| 10***13 | Cable Group-Throttle | 1 |
145-0439 Gauge Gp-Vibratory
| 13***34 | Spacer | 2 |
| 13***35 | Spacer | 2 |
| 13***36 | Plate | 2 |
121-2001 Gauge Gp-Vibratory
| 10***51 | Cover | 1 |
| 12***01 | Gauge Group-Vibratory | 1 |
| 1G***95 | Bolt | 2 |
108-7735 Guard Gp-Vandalism
| 09***02 | Swivel | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 1 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
1g-6588 Control Gp-Handle
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 12***32 | Tachometer; (-Instrument) | 1 |
| 14***84 | Guard-Magneto Sensor | 1 |
136-6880 Kit-Cab Mount
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 13***80 | Kit-Cab Mount | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
7r-6606 Lever Gp-Propel
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 7R***06 | Lever As | 1 |
111-1366 Lever Gp-Propel
| 10***77 | Control Group-Steering | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 11***66 | Lever Group-Propel | 1 |
135-2929 Module Gp-Warning Indicator
| 10***35 | Guard Group-Vandalism | 1 |
| 11***22 | Seat Group | 1 |
| 12***57 | Platform Group-Operator | 1 |
116-2629 Operator Ar
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 2 |
133-7142 Operator Ar
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 2 |
125-0657 Platform Gp-Operator
| 12***57 | Platform Group-Operator | 1 |
| 1G***23 | Rops Group | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
119-5001 Platform Gp-Operator
| 11***01 | Platform Group-Operator | 1 |
| 12***37 | Rops As | 1 |
| 6V***46 | Trim; (5-Dm) | 0 |
122-4608 Rops Gp
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 2 |
| 12***08 | Rops Group | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
1g-8223 Rops Gp
| 10***29 | Seat Belt Group | 1 |
| 10***98 | Kit-Fastener; (Seat) | 1 |
| 1G***23 | Rops Group | 2 |
104-6546 Rops Gp
| 10***46 | Rops Group | 1 |
108-7829 Seat Belt Gp
| 10***29 | Seat Belt Group | 1 |
| 13***82 | Adjuster St | 1 |
| 13***83 | Cushion-Seat | 1 |
9v-8184 Seat Gp-Suspension
| 02***24 | Locknut; (1/4-20-Thd) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 12 |
| 2K***11 | Pin (Spring-Outer) | 2 |
105-7628 Seat Gp
| 03***43 | Nut; (5/16-18 Thd) | 4 |
| 10***28 | Seat Group | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 4 |
103-5953 Seat Gp -Vinyl
| 10***08 | Plate-Seat Base | 1 |
| 10***53 | Seat Group; -Vinyl | 2 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
119-5122 Seat Gp
| 10***28 | Seat Group | 1 |
| 11***22 | Seat Group | 1 |
9c-4449 Seat Gp
| 10***29 | Seat Belt Group | 1 |
| 10***97 | Kit-Fastener | 2 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
120-8200 Seat Gp-Suspension
| 00***45 | Sleeve | 2 |
| 00***39 | Elbow | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
9v-7924 Suspension Gp-Seat
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 10***58 | Film-Instruction; (Operator) | 1 |
| 9V***24 | Suspension Group-Seat | 1 |
Power Train
119-4995 Axle & Mtg Gp-Drive
| 11***95 | Axle & Mtg Group-Drive | 1 |
| 13***95 | Axle Group | 1 |
| 1D***24 | Bolt--19 mm (3/4 Inches) X 229 mm (9 Inches) | 8 |
334-0828 Axle & Mtg Gp-Drive
| 13***72 | Axle Group-Drive | 1 |
| 33***28 | Axle & Mtg Group-Drive | 1 |
| 7X***70 | Bolt; (M20x2.5x220-mm) | 8 |
168-8693 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 2 |
| 0T***18 | Bolt Strap To Front Cover | 2 |
117-7531 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 1 |
138-2497 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 1 |
117-7532 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 03***20 | Bolt; (1/2-13x1.45-In) | 8 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
138-2495 Axle Gp
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 1 |
136-8872 Axle Gp-Drive
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 05***59 | Housing-Brake; (Lh)(Lh) | 1 |
| 05***60 | Housing-Brake; (Outer)(Outer) | 1 |
163-0053 Differential Gp
| 16***53 | Differential Group | 1 |
116-5508 Drive Gp-Drum
| 07***92 | Mount, Rubber Shock | 8 |
| 11***52 | Seal-O-Ring | 1 |
| 11***35 | Plate | 1 |
116-5505 Drive Gp-Drum
| 07***92 | Mount, Rubber Shock | 6 |
| 11***52 | Seal-O-Ring | 1 |
| 11***36 | Plate | 1 |
139-2040 Drive Gp-Drum
| 11***52 | Seal-O-Ring | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
| 13***70 | Planetary Group-Final Drive; -Without Motor | 1 |
139-2038 Drive Gp-Drum
| 11***52 | Seal-O-Ring | 1 |
| 12***59 | Motor Group-Piston; -Propel, Drum | 1 |
| 13***70 | Planetary Group-Final Drive; -Without Motor | 1 |
158-7786 Drum Gp-Drive & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 13***36 | Drum Group-Padded | 1 |
| 14***46 | Plate-Drum Drive | 1 |
139-2033 Drum Gp-Drive & Vibratory
| 13***33 | Drum Group-Drive & Vibratory | 1 |
| 13***36 | Drum Group-Padded | 1 |
| 13***40 | Drive Group-Drum | 1 |
158-7787 Drum Gp-Drive & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 13***35 | Drum Group-Smooth | 1 |
| 13***78 | Plate-Drum Drive | 1 |
139-2032 Drum Gp-Drive & Vibratory
| 13***32 | Drum Group-Drive & Vibratory | 1 |
| 13***35 | Drum Group-Smooth | 1 |
| 13***38 | Drive Group-Drum | 1 |
121-2795 Drum Gp-Padded
| 11***39 | Bumper Group-Drum | 1 |
| 12***94 | Drum Group-Padded | 1 |
| 12***95 | Drum Group-Padded | 1 |
121-2794 Drum Gp-Padded
| 07***92 | Mount, Rubber Shock | 8 |
| 11***35 | Plate | 1 |
| 11***07 | Drum Group-Padded | 1 |
116-5509 Drum Gp-Padded
| 11***07 | Drum Group-Padded | 1 |
| 11***08 | Drive Group-Drum | 1 |
| 11***09 | Drum Group-Padded | 1 |
116-5507 Drum Gp-Padded
| 07***08 | Bearing; (Tapered Roller) | 4 |
| 07***84 | Shim; (0.8-mm Thk) | 2 |
| 07***54 | Retainer, Bearing | 4 |
139-2036 Drum Gp-Padded
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 12***16 | Plate As | 2 |
| 13***36 | Drum Group-Padded | 1 |
158-7788 Drum Gp-Smooth
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
121-2649 Drum Gp-Smooth
| 07***92 | Mount, Rubber Shock | 6 |
| 11***36 | Plate | 1 |
| 11***04 | Drum Group-Smooth | 1 |
139-2035 Drum Gp-Smooth
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 12***16 | Plate As | 2 |
| 13***35 | Drum Group-Smooth | 1 |
116-5506 Drum Gp-Smooth
| 11***04 | Drum Group-Smooth | 1 |
| 11***05 | Drive Group-Drum | 1 |
| 11***06 | Drum Group-Smooth | 1 |
116-5504 Drum Gp-Smooth
| 07***08 | Bearing; (Tapered Roller) | 4 |
| 07***84 | Shim; (0.8-mm Thk) | 2 |
| 07***54 | Retainer, Bearing | 4 |
121-2793 Drum Gp-Smooth
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 12***49 | Drum Group-Smooth | 1 |
160-7044 Drum Gp-Smooth
| 11***39 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
| 12***58 | Spacer; (2-mm Thk) | 2 |
160-7043 Drum Gp-Smooth
| 11***44 | Scraper Group-Drum | 1 |
| 11***05 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
158-7789 Drum Gp-Smooth
| 11***39 | Bumper Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 2 |
| 12***58 | Spacer; (2-mm Thk) | 2 |
7x-8144 Planetary Gp-Final Drive
| 07***90 | Ring-Retaining | 1 |
| 2L***93 | Pin,Straight | 3 |
| 7R***09 | Hub | 1 |
116-2630 Hydraulic Ar-Propel
| 11***30 | Hydraulic Ar-Propel | 1 |
| 11***38 | Motor & Mtg Group-Propel | 1 |
| 11***31 | Pump & Mtg Group-Propel | 1 |
122-1508 Installation Gp-Drum
| 12***08 | Installation Group-Drum | 1 |
| 12***57 | Spacer; (1.6-mm Thk) | 8 |
| 12***58 | Spacer; (2-mm Thk) | 8 |
129-6391 Lines Gp-Propel
| 10***88 | Bar | 5 |
| 11***17 | Hose As | 1 |
| 11***18 | Hose As | 1 |
119-0545 Lines Gp-Propel
| 10***88 | Bar | 5 |
| 10***82 | Hose As | 1 |
| 10***66 | Hose As | 1 |
116-7038 Motor & Mtg Gp-Propel
| 11***38 | Motor & Mtg Group-Propel | 1 |
| 12***60 | Motor Group-Propel; -Propel, Axle | 1 |
| 13***11 | Cap; (Tamper Resistant) | 2 |
123-6826 Planetary Gp-Final Drive
| 07***90 | Ring-Retaining | 1 |
| 11***33 | Coupling | 1 |
| 11***18 | Shaft-Planetary | 6 |
136-8870 Planetary Gp-Final Drive -Without Motor
| 09***07 | Bolt; (M16x2x120-mm) | 6 |
| 09***58 | Ring-Retaining | 3 |
| 13***64 | Disc-Friction | 5 |
152-0287 Planetary Gp-Final Drive -Without Motor
| 09***07 | Bolt; (M16x2x120-mm) | 6 |
| 09***58 | Ring-Retaining | 3 |
| 13***64 | Disc-Friction | 5 |
119-4993 Power Train Ar
| 11***09 | Drum Group-Padded | 1 |
| 11***51 | Wheel & Tire Group | 1 |
| 11***93 | Power Train Ar | 1 |
119-4992 Power Train Ar
| 11***06 | Drum Group-Smooth | 1 |
| 11***07 | Wheel & Tire Group | 1 |
| 11***92 | Power Train Ar | 1 |
117-1831 Pump & Mtg Gp-Propel
| 11***22 | Drive Group-Pump | 1 |
| 11***29 | Tee-O-Ring | 2 |
| 11***38 | Pump Group-Piston | 1 |
124-8918 Pump & Mtg Gp-Propel
| 11***81 | Hose As | 2 |
| 11***83 | Hub As-Coupling | 1 |
| 12***18 | Pump & Mtg Group-Propel | 1 |
104-2966 Axle Gp-Drive
| 10***66 | Traction Group | 1 |
| 11***31 | Axle Group; Axle Gp-Drive | 1 |
| 13***97 | Axle Group | 1 |
119-0551 Wheel & Tire Gp
| 11***51 | Wheel & Tire Group | 1 |
| 11***78 | Wheel & Tire Group | 1 |
| 11***79 | Wheel & Tire Group | 1 |
118-5607 Wheel & Tire Gp
| 11***07 | Wheel & Tire Group | 1 |
| 1G***05 | Wheel & Tire Group | 2 |
| 5H***04 | Washer Rear Bracket Assembly To Frame; Washer-Rear Bracket Assembly To Frame | 16 |
1g-3605 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
119-0679 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
119-0678 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
Service Equipment And Supplies
127-8781 Cart Gp-Filter
| 09***17 | Washer | 4 |
| 12***81 | Cart Group-Filter | 1 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
120-8180 Film Gp
| 12***80 | Film Group | 1 |
| 12***93 | Connector | 1 |
| 12***81 | Cart Group-Filter | 1 |
107-8697 Film Gp
| 09***17 | Washer | 4 |
| 10***97 | Film Group | 1 |
| 3E***40 | Film (Warning), Pinch Point Area; . Located On The Left Hand Side Of The Hydraulic Tank. | 2 |
120-8181 Film Gp
| 00***07 | Elbow; (90 Degree) | 1 |
| 12***81 | Film Group | 1 |
| 12***87 | Adapter | 1 |
128-4242 Flushing Gp-Drum
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***33 | Screw-Drilling | 4 |
| 11***03 | Film-Identification; (Fuse) | 1 |
128-4238 Flushing Gp-Drum
| 12***51 | Connector | 1 |
| 12***89 | Valve-Ball | 1 |
| 12***38 | Flushing Group-Drum | 1 |
128-4241 Flushing Gp-Drum
| 12***41 | Flushing Group-Drum | 1 |
120-8178 Plate & Film Gp
| 12***78 | Plate & Film Group | 1 |
119-4999 Plate & Film Gp
| 11***99 | Plate & Film Group | 1 |
115-5852 Plate & Film Gp -Engine Information
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 10***33 | Screw-Drilling | 4 |
| 11***52 | Plate & Film Group; -Engine Information | 1 |
119-4998 Plate & Film Gp
| 11***98 | Plate & Film Group | 1 |
| 5P***44 | Film Warning; On Front Vertical Surface Of Platform On Right Side & Left Side Of Fuel Tank Under The Grab Irons | 2 |
| 6V***11 | Film; Film-Warning. Located On Front Of Fuel | 1 |
Steering System
101-8677 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 10***77 | Control Group-Steering | 1 |
125-0663 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 12***68 | Steering Column | 1 |
109-6704 Cylinder & Mtg Gp-Steering
| 10***90 | Clamp-Block | 3 |
| 10***04 | Cylinder & Mtg Group-Steering | 1 |
| 12***66 | Bar | 6 |
101-8477 Lines Gp-Steering Cylinder
| 10***77 | Lines Group-Cylinder | 1 |
| 10***61 | Elbow-Face Seal | 1 |
| 11***97 | Pump Group-Gear | 1 |
123-6582 Lines Gp-Steering
| 10***90 | Clamp-Block | 2 |
| 12***66 | Bar | 4 |
| 12***82 | Lines Group-Steering | 1 |
125-0662 Lines Gp-Steering
| 11***46 | Hose As | 2 |
| 12***62 | Lines Group-Steering | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 8 |
125-1179 Pump & Mtg Gp-Steering
| 05***50 | Seal | 3 |
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
| 10***53 | Kit-Parts Control | 1 |
117-2655 Pump & Mtg Gp-Steering
| 10***61 | Elbow-Face Seal | 1 |
| 11***55 | Pump & Mtg Group-Steering | 1 |
| 12***63 | Pump Group-Gear | 1 |
1g-9787 Pump Gp-Metering
| 00***63 | Seal-O-Ring; (55.24mm Id) | 1 |
| 10***99 | Screw | 2 |
| 11***31 | Seal-O-Ring | 1 |
Vibratory System
121-2648 Drive Gp-Support & Vibratory
| 12***48 | Drive Group-Support & Vibratory | 1 |
| 12***87 | Shaft | 1 |
| 12***39 | Seal | 2 |
139-2054 Drive Gp-Support & Vibratory
| 12***88 | Shaft | 1 |
| 12***85 | Flange | 1 |
| 12***39 | Seal | 2 |
116-5887 Drive Gp-Support & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 11***87 | Drive Group-Support & Vibratory | 1 |
| 14***08 | Plate | 1 |
1g-8830 Support Gp-Vibratory
| 08***35 | Lighting Group-Warning | 1 |
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
140-8266 Housing Gp-Eccentric Weight -Lh
| 12***88 | Shaft | 1 |
| 12***39 | Seal | 4 |
| 12***40 | Bearing | 2 |
140-8267 Housing Gp-Eccentric Weight -Rh
| 11***64 | Hose As | 1 |
| 11***70 | Hose As | 1 |
| 11***75 | Hose As | 1 |
116-2633 Hydraulic Ar-Vibratory
| 11***33 | Hydraulic Ar-Vibratory | 1 |
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
160-7630 Lines Gp-Vibratory
| 13***69 | Motor Group-Piston; -Vibratory | 1 |
| 16***30 | Lines Group-Vibratory | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
119-0548 Lines Gp-Vibratory
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 11***48 | Lines Group-Vibratory | 1 |
| 12***38 | Hose As | 1 |
129-6392 Lines Gp-Vibratory
| 11***45 | Screen-Suction; (Hydraulic Tank) | 1 |
| 12***38 | Hose As | 1 |
| 12***41 | Hose As; (3/8-16x4.75in) | 1 |
145-0438 Lines Gp-Vibratory
| 13***76 | Flange | 4 |
| 14***38 | Lines Group-Vibratory | 1 |
| 14***42 | Hose As | 1 |
108-2793 Motor & Mtg Gp-Vibratory
| 10***69 | Seal; (27.5mm Id) | 2 |
| 10***93 | Motor & Mtg Group-Vibratory | 1 |
| 11***98 | Pump Group-Piston | 1 |
140-9614 Motor & Mtg Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***62 | Pump Group-Piston | 1 |
| 12***09 | Elbow | 2 |
119-0547 Pump & Mtg Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***47 | Pump & Mtg Group-Vibratory | 1 |
| 12***09 | Elbow | 2 |
124-8908 Pump & Mtg Gp-Vibratory
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***08 | Pump & Mtg Group-Vibratory | 1 |
| 12***09 | Elbow | 2 |
147-0333 Shaft Gp-Eccentric Weight
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***37 | Seal | 1 |
140-6316 Shaft Gp-Eccentric Weight
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***64 | Seal-O-Ring | 1 |
159-9405 Support Gp-Vibratory
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
| 10***08 | Film-Instrument | 1 |
CP-533C serial number reference
On CP-533C and CS-533C compactors the Cat serial/PIN plate is riveted to the main frame, typically on the right-hand side near the front axle or articulation joint, or on the frame rail just below the operator's platform; the number is sometimes also stamped into the frame nearby. Read the first three characters of the Product Identification Number as the serial prefix (identifies model and production block), and the remaining digits as the individual machine's build sequence. This C-series generation was documented in one combined parts manual covering both the padfoot (CP) and smooth-drum (CS) versions, and used several sequential prefix blocks (2WN, 2XN, 3XN, 3YN) across its production run rather than a single range. Match the full prefix against the parts or service manual's stated serial range before pulling parts, and confirm with your dealer if your machine's prefix is not one of these.
| Prefix | Identifies | Notes |
|---|---|---|
| 2WN | CP-533C / CS-533C vibratory soil compactor, C-series (shared chassis parts manual covers both padfoot and smooth-drum drum options) | Appears in chassis and drum parts documentation for this C-series machine, tied directly to the CS-533C by name. The CP-533C and CS-533C share one combined parts manual for this generation, so this range most likely covers both drum configurations. Uses the Cat 3116 turbocharged engine (3116T rating, about 108 kW / 145 hp gross). Confirm the CP-533C tie with your dealer before ordering parts, since only the CS-533C name was found directly tied to this specific range. |
| 2XN | CP-533C / CS-533C vibratory soil compactor, C-series (shared chassis parts manual) | Documented for cab, operator platform, and drum groups tied directly to the CS-533C by name, within the same combined C-series parts manual family as the other ranges here. Same 3116T engine as the rest of the C-series line. Confirm the CP-533C tie with your dealer before ordering parts, since only the CS-533C name was found directly tied to this specific range. |
| 3XN | CP-533C / CS-533C vibratory soil compactor, C-series | Confirmed directly against the CP-533C by name in parts catalog listings for the cooling system group, and against the CS-533C in the same manual's chassis/drum group. Powered by the Cat 3116 turbocharged engine (3116T rating, about 108 kW / 145 hp gross). |
| 3YN | CP-533C / CS-533C vibratory soil compactor, C-series | Confirmed directly against the CP-533C by name in one parts catalog listing and against the CS-533C cab assembly in another, both within the same combined C-series parts manual. Same 3116T engine as the rest of the C-series line. |
Frequently asked questions
What engine powers the Caterpillar CP-533C?
A Cat 3116T turbocharged diesel: a mechanically governed, 6.6 liter inline-six rated at 108 kW (145 hp) gross. It predates modern electronic engine control and uses simple flash-code diagnostics only.
How much does a CP-533C weigh?
Operating weight is about 10,761 kg (23,722 lb). Transport dimensions run roughly 5.26 m (17.3 ft) long, 2.29 m (7.5 ft) wide, and 2.77 m (9.1 ft) tall, with a 2.74 m (9 ft) wheelbase.
What replaced the CP-533C?
Caterpillar moved this model through a D-series update before replacing it with the CP-533E/CS-533E, which switched to the Cat 3054C engine and more modern electronic controls. The D- and E-series are distinct generations and should not be treated as parts- or spec-interchangeable with the C-series.
What CP-533C owners discuss
Why does the vibratory drum sometimes stop shaking mid-pass?
Most no-vibration complaints trace to the eccentric weight assembly inside the drum, not the pump. A worn splined coupling between the vibratory motor and shaft, loose eccentric weight fasteners, or worn weight bearings let the motor spin without turning the shaft. Low level in the vibratory bearing lube reservoir causes the same weak or intermittent vibration. The vibratory circuit only engages at high idle on this machine, so no vibration at low RPM is normal, not a fault. Check bearing lube level and the coupling before condemning the motor. Have your dealer verify shaft and bearing condition before any drum teardown.
What wears out first on the drum and pads?
Steel foot tips wear down first, especially in clay and other cohesive soils that pack solid between the pads and cut compaction effect. Below that, the drum bearing and seal are the classic failure point on any single-drum padfoot machine. Seal failure lets water and grit into the bearing race, and the bearing then damages the eccentric shaft and housing. A failed drum bearing usually means a full drum rebuild, not a simple seal swap. Skipped vibratory bearing lube service is the most commonly cited cause of early drum failure on this class of machine.
Any known engine quirks on this series?
The turbocharged 3116 inline-six in this compactor (108 kW / 145 hp, 6.6 L) is mechanically governed and generally solid, but picky about oil. Cat specifies single-grade oil meeting CF-4 or higher because of the closed crankcase ventilation design; multi-grade viscosity additives can foul the turbo and aftercooler with blow-by residue over time, showing up as smoke and lost power. Overheating complaints usually trace to a stuck thermostat, clogged coolant passages, or a tired water pump, not the block itself. These are known 3116 traits across marine, truck, and industrial use, not something unique to the compactor application.
What electrical or sensor problems come up?
Most electrical complaints on machines this age come from corroded connectors, not failed modules. Moisture or oil working into a sensor plug, such as the oil pressure sender, coolant temp switch, or speed sensor, causes intermittent gauge readings or unexplained shutdowns that clear up once the connector is cleaned and re-sealed. Corroded battery terminals and worn starter relay contacts are common on machines stored outside for long stretches. Chase the wiring and connectors before replacing a sensor outright.
What about the hydraulic propel drive?
The propel circuit runs on a hydraulic motor driving the drum, with wheel drive on some configurations. Shaft seal weeping at the motor and sluggish response on grade are the most-reported symptoms as hours climb. A machine that struggles on a grade it used to handle fine often has a propel motor losing internal efficiency, well before outright failure. Low hydraulic fluid level or a weak charge pump can mimic the same symptom, so check fluid level and filter condition first.
What should I check before buying a used CP-533C?
Spin the drum by hand where possible and listen for bearing roughness or play. Inspect padfoot tips for even wear versus one side chewed down, which points to frame or axle misalignment. Confirm the vibratory system engages cleanly at high idle and check the vibratory bearing lube reservoir level and color. On the engine, confirm single-grade CF-4 oil is in use and check for coolant-in-oil or oil-in-coolant cross-contamination, a sign of head gasket or cooler trouble. Walk the hydraulic lines and propel motor for seal weeping, and check the articulation joint and steering cylinders for play. Maintenance records on bearing lube and coolant service matter more than raw hour count on this machine type. Have your dealer verify drum bearing and eccentric shaft condition before finalizing a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CP-533C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.