Caterpillarpaving compactorvibratory compactor
Caterpillar CP-433C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CP-433C is a single-drum vibratory padfoot soil compactor for subgrade, embankment, and trench compaction on cohesive and semi-cohesive ground, built in the roughly 1.68 m (66 in) compaction-width class. Operating weight runs about 6.6 to 6.9 t (14,600 to 15,240 lb) depending on canopy or blade configuration and by source. It runs the Cat 3054T turbocharged four-cylinder diesel, rated about 78 kW (105 hp) gross, driving a closed-loop hydrostatic propel system to the rear tired axle and a hydraulically actuated eccentric weight in the front drum. Cat built the C-series family through roughly 1997 to 2002, following the earlier B-series (CS-431B/CS-433B/CP-433B) and preceding the E-series (CS-423E/CS-433E/CP-433E) that took over from about 2001. One chassis, hitch, and propel system underpins three configurations: the CP-433C padfoot drum, the smooth-drum CS-433C, and the narrower CS-431C, offered with an open ROPS canopy as the base configuration.
Across the B- to C- to E-series changes, Cat kept the drum, chassis, and hitch architecture largely intact and updated the engine and controls each generation; the E-series moved to the Cat 3054C and refined amplitude-selection controls, while the padfoot-versus-smooth-drum and 431-versus-433 split carried through unchanged. The CP-433C's persistent weak points, dry-sleeve cylinder liners that don't forgive overheating, isolator mounts that crack at the top edge, and hydrostatic charge-pressure faults, are well documented by shops still running this generation, which keeps its used and parts market active well past factory support. It remains a common used-market machine for contractors who want a simple, mechanically governed compactor without chasing electronically controlled E-series or newer parts, and its shared chassis, hitch, and propel design with the CS-433C and CS-431C siblings makes cross-shopping salvage drums, axles, and hydraulic components a realistic sourcing strategy.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CP-433C specifications
Engine
| Engine model | Cat 3054T, 4-cylinder turbocharged diesel, direct injection (fitted throughout this model's production run) |
| Displacement | 4.4 L (269 cu in) |
| Gross power | 78 kW (105 hp) at 2200 rpm |
| Net power | Not published separately from the gross power rating in available spec sheets |
| Emissions certification | No formal emissions tier listed; production era predates tiered engine emissions rules for this size class. Some resale listings for early-build units describe the engine as pre-emission |
Weights
| Operating weight | About 6,910 kg (15,240 lb) per most published spec sheets; some listings show roughly 6,620 kg (14,600 lb) instead. Varies by configuration (blade, ROPS or cab, drum type) and by source |
| Shipping weight | Not separately published; operating weight is the figure carried in factory literature |
| Ground pressure | Not published for this model |
Dimensions
| Transport length, with blade | 4.85 m (15 ft 11 in) |
| Width over tires | 1.80-1.83 m (5 ft 11 in - 6 ft 0 in) |
| Height, to top of cab/ROPS | 2.93-2.96 m (9 ft 7 in - 9 ft 8 in) |
| Ground clearance | 38 cm (15 in) |
| Drum diameter | 122 cm (48.0 in) |
| Drum (compaction) width | 168 cm (66 in) |
| Rear tire size | 14.9x24, 6-ply |
Performance
| Travel speed, maximum | 13.4 km/h (8.3 mph) |
| Gradeability | Not published for this model |
| Compaction (centrifugal) force, high amplitude | 124.5 kN (28,000 lbf) |
| Compaction (centrifugal) force, low amplitude | 61.4 kN (13,800 lbf) |
| Vibration frequency | 1800 vpm (30 Hz) |
Service capacities (summary)
| Fuel tank | 167.3 L (44.2 gal) |
| Hydraulic system | 71.2 L (18.8 gal) |
| Engine oil | 6.8 L (1.8 gal) |
| Cooling system | Not published for this model |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CP-433C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 6.8 L (1.8 US gal) | Cat 3054 four-cylinder diesel. Use Cat DEO or Cat DEO-ULS diesel engine oil. SAE 15W-40 is preferred for -10 to 50 C (14 to 122 F). SAE 10W-30 covers a wider cold range, -18 to 40 C (0 to 104 F). For cold-soaked starts down to -40 C (-40 F) use Cat DEO Cold Weather SAE 0W-40. Non-Cat oils meeting Cat ECF-1-a, ECF-2 or ECF-3 are acceptable second-choice oils. Engine aspiration (naturally aspirated vs turbocharged 3054T) varies by source for this serial range; verify against the engine arrangement number on the machine before ordering parts. |
| Cooling system | Not published for this exact machine; the Cat 3054 family runs roughly 7 L (7.4 qt) for the engine block alone up to about 12-15 L (12.7-15.8 qt) for a complete installed system depending on radiator and configuration - confirm the actual fill with your dealer or by draining and refilling to the sight glass/neck level. | Cat ELC (Extended Life Coolant), premixed 1:1 with water, gives freeze protection to -37 C (-34 F); service life up to 12,000 hours or 6 years with a mid-life extender addition. Cat DEAC conventional coolant is also acceptable, with Cat SCA maintained between 1200 and 2400 ppm nitrite and changed every 3000 hours or 3 years. Minimum 30 percent glycol required, 50 percent recommended. |
| Fuel tank | 167.3 L (44.2 US gal) | Ultra low sulfur No. 1-D/No. 2-D distillate diesel per ASTM D975 or EN 590, cetane 40 minimum. Biodiesel blends up to B20 are acceptable in this engine family when the blend stock meets ASTM D6751/EN14214. Cat Diesel Fuel Conditioner or Fuel System Cleaner can be used if fuel quality or injector deposits are a concern. |
| Hydraulic system and tank (propel, steering, and vibratory drive circuit) | 71.2 L (18.8 US gal) | Cat HYDO Advanced is preferred: SAE 10W for -20 to 40 C (-4 to 104 F), SAE 20W for -5 to 45 C (23 to 113 F), SAE 30 for 10 to 50 C (50 to 122 F). Cat Bio HYDO Advanced (ISO 46 multigrade) is the option where biodegradable fluid is required, -30 to 45 C (-22 to 113 F). Cat TDTO can substitute at the same viscosity grades. Minimum acceptable commercial oil viscosity is 6.6 cSt at 100 C (212 F). |
| Rear drive axle / differential and wheel ends | Not published for this exact model - verify with your dealer. | Cat TDTO (Transmission/Drive Train Oil): SAE 10W for -20 to 0 C, SAE 30 for -25 to 25 C, SAE 50 for -15 to 50 C (5 to 122 F) is the typical factory fill grade for this duty; Cat TDTO-TMS multigrade covers a wider span in one product. Do not substitute API GL-4/GL-5 gear oil in this compartment unless specifically called out for the exact serial range. |
| Vibratory drum eccentric weight housing / drum bearing pack | Not published for this exact model - verify with your dealer. | Cat Synthetic Compactor Oil, a premium PAO synthetic gear and bearing oil with no viscosity improvers, ISO 220 grade, usable -20 to 50 C (-4 to 122 F); a full-synthetic ISO 68 alternative is used for extreme cold below about -20 C. Cat specifically warns against using API GL-4 or GL-5 gear oil in the eccentric weight housing, final drive planetary drum, or vibratory support. |
| Grease (chassis and drum bearing points) | N/A - grease gun application, no reservoir fill volume | For articulation/oscillating bearings, control cables, steering pins and cylinder ends, and drum weight bearings on a vibratory soil compactor: Cat Extreme Application Grease NLGI 1 in cold climates or NLGI 2 for moderate-to-high vibration and heavy cohesive soil duty (roughly -30 to 50 C). Cat Prime Application Grease NLGI 2 covers medium-duty granular-soil work, and Cat Utility Grease NLGI 2 covers light-duty/low-vibration use. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CP-433C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the CP-433C beyond the schedule
Predictive Maintenance & Fluid Analysis
Sample engine oil, hydraulic oil, and eccentric-housing oil on a fixed interval and track wear-metal trends instead of single readings, since the Cat 3054T's dry-sleeve liners tolerate almost no sustained overheating before piston-to-liner scuffing starts. Treat any overheating event as reason to check compression and oil for metal before the machine goes back to work, not just top off coolant. Track hydrostatic charge pressure at the test port over time to catch charge-pump wear before it shows up as sluggish, hesitant propel.
Corrective & Common Repairs
Recurring corrective items on this platform: weak charging from a worn belt or corroded battery cable, low oil pressure traced to a sludge-clogged relief valve rather than the pump, and sluggish hydrostatic propel from low charge pressure, a plugged charge filter, or cold heavy oil. On the drum, replace cracked or rounded padfoot shells and re-torque mounting bolts, and rotate cracking rubber isolator mounts 180 degrees to extend life before replacing the set. A documented brake-switch contact-block fix resolves intermittent brake and neutral-interlock faults on this compactor family.
Overhaul & Rebuild Points
At rebuild-level hours, treat the Cat 3054T's turbocharger, water pump, and cylinder liners as one job, since these liners can weld to the piston under sustained overheating; any overheat history means checking for internal damage before the machine returns to service. The eccentric-weight bearing pack is the compactor-specific overhaul point: lapsed servicing lets the shaft bind and can crack the drum shell. Rebuild the hydrostatic propel pump and drive motor together to keep travel speed and vibratory force matched, and renew articulation-hitch bushings and pins as wear dictates.
Seasonal & Environment Servicing
Cold starts stress this mechanically governed diesel; use Cat DEO Cold Weather 0W-40 below about -18C (0F) and confirm coolant freeze protection, since a hard-starting 3054T adds cranking wear on top of its known overheating sensitivity. In hot, dusty work, clean the radiator core more often than the standard interval and watch the temperature gauge, since the liner tolerates little heat. Wet or muddy sites accelerate corrosion at the articulation hitch, drum-yoke connectors, and isolator mounts; wash and grease these points each shift.
CP-433C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 101-3743 | Seal | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 108-0671 | Filter Element-Air | Air intake service | Check fitment → |
| 108-0672 | Filter Element-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CP-433C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Charging System Warning Lamp (dash icon, no alphanumeric readout) | Alternator output is below the system's normal charging voltage while the engine runs | Worn or loose alternator drive belt, corroded/loose battery or ground cable, faulty voltage regulator, or a failed alternator | Check belt condition and tension, inspect battery and ground cable connections, verify alternator output at the terminal before replacing the alternator |
| Engine Oil Pressure Warning Lamp / Buzzer | Engine oil pressure has dropped below the sending switch's normal operating set point | Low oil level, plugged oil filter, worn oil pump, or a faulty oil pressure sending switch | Shut the engine down immediately, check oil level and filter condition, and check sender wiring continuity before restarting |
| Engine Coolant Temperature Warning Lamp / Gauge in Red Zone | Coolant temperature has exceeded the normal operating range | Low coolant level, debris-plugged radiator core, slipping or broken fan belt, or a faulty thermostat or temperature sender | Idle down and shut off per the cooldown procedure, check coolant level once cool, inspect radiator core and fan belt, verify sender wiring |
| No-Crank Condition (Neutral Start Circuit Fault) | Starter will not engage even with the key in the start position and the propel control in neutral | Neutral start switch out of adjustment or failed, neutral start relay failure, or an open/corroded connection in the start circuit | Confirm the propel lever is fully in neutral, check neutral start switch adjustment and continuity, test the neutral start relay, then inspect start-circuit wiring and fuses |
| Propel Inoperative or Creep-Speed Only (Low Charge Pressure) | Hydrostatic propel charge pressure is below normal, so the propel system defaults to reduced or no propel | Low hydraulic oil level, plugged charge filter, cold/high-viscosity oil, or a plugged orifice in the brake or shift valve | Check hydraulic oil level and condition, replace the charge filter, allow the oil to warm before full-speed operation, then check charge pressure at the test port against spec |
| Air Cleaner Restriction Indicator (if equipped) | Intake air filter restriction has exceeded the allowable limit | Clogged air filter element or a collapsed/blocked intake hose | Inspect and replace the air filter element, then check intake piping for restriction or collapse |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CP-433C attachments & work tools
Padfoot drum (factory-fitted)
CP-433C is built as a padfoot single-drum vibratory soil compactor with a cast, tapered-pad drum shell, in the roughly 1.68 m (66 in) compaction-width class, aimed at cohesive and semi-cohesive soils. It shares chassis and propel/hitch design with its smooth-drum sibling CS-433C and the narrower CS-431C in the same C-series family.
Smooth-drum shell-kit conversion
A bolt-on smooth-drum shell kit is documented for this padfoot platform to convert it toward granular/base-material work, matching the CS-433C smooth-drum sibling. Shell halves bolt directly around the existing drum body; no separate hydraulic kit is required for the swap.
Front grading/leveling blade
Individual CP-433C units are documented with a front-mounted grading blade, roughly 2 m (78 in) class, raised and lowered off the machine's own hydraulic system rather than a bolt-on kit. Used for backfilling and leveling ahead of rolling passes; sale listings show it fitted to some units but it is not confirmed as a universal standard fitment.
Vibratory system / amplitude control
Compaction force comes from an eccentric weight shaft inside the drum; amplitude level is set by the direction of weight-shaft rotation, with frequency for this size class in the low-30s Hz range. Selectable or variable-frequency control is documented for the later E-series update of this platform - treat as series-dependent and verify rather than assume it applies to the C-series.
Articulated oscillating hitch
The drum module and the rear tired-axle module join through a sealed, oscillating articulation hitch, letting the drum follow ground contour independent of the rear frame. This joint and propel system is shared across the CS-431C, CS-433C and CP-433C family rather than being a work-tool mount.
Operator protection (ROPS/canopy)
Base configuration is open ROPS (OROPS); canopy-top OROPS fitment is documented on individual sale listings for this model. No enclosed-cab option is confirmed for the C-series - enclosed cab/ROPS references found in research belong to the later E-series platform, not this model.
All CP-433C assemblies by section
Every catalogued assembly group for the Caterpillar CP-433C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
141-9379 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
105-7597 Air Cleaner Gp
| 07***82 | Hood | 1 |
| 10***53 | Hose-Air | 1 |
| 10***97 | Air Cleaner Group | 1 |
110-4349 Air Cleaner Gp
| 10***71 | Filter Element-Air; (Primary) | 1 |
| 10***72 | Filter Element-Air; (Secondary) | 1 |
| 11***49 | Air Cleaner Group | 1 |
137-4682 Air Cleaner Gp
| 07***08 | Cover, . Ring; Slide | 1 |
| 13***82 | Air Cleaner Group | 1 |
| 14***79 | Air Cleaner Group | 1 |
140-2759 Air Cleaner Gp
| 07***08 | Cover, . Ring; Slide | 1 |
| 14***57 | Hose-Air | 1 |
| 14***59 | Air Cleaner Group | 1 |
6i-4203 Cartridge Gp-Turbocharger
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 6I***04 | Housing As | 1 |
| 6I***05 | Wheel | 1 |
142-0102 Extension Gp-Air Cleaner
| 07***54 | Clamp | 1 |
| 14***02 | Extension Group-Air Cleaner | 1 |
| 15***89 | Stack-Extension | 1 |
142-5073 Flange Gp-Exhaust
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***73 | Flange Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
110-7941 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 11***41 | Manifold Group-Exhaust | 1 |
| 15***33 | Stud | 4 |
100-3163 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***64 | Manifold-Exhaust | 1 |
6i-4680 Manifold Gp-Inlet
| 06***58 | Clamp-Hose | 1 |
| 13***01 | Hose-Inlet | 1 |
| 13***05 | Manifold-Inlet | 1 |
124-7710 Manifold Gp-Inlet
| 11***79 | Gasket | 2 |
| 11***60 | Manifold-Inlet | 1 |
| 11***62 | Plate | 1 |
105-7596 Muffler Gp
| 10***89 | Tube As | 1 |
| 10***96 | Muffler Group | 1 |
| 11***41 | Plate | 1 |
137-4547 Muffler Gp
| 13***45 | Tube As-Exhaust | 1 |
| 13***47 | Muffler Group | 1 |
| 14***76 | Connector; (S23, S25, S26) | 1 |
140-3001 Muffler Gp
| 14***01 | Muffler Group | 1 |
| 14***02 | Tube As | 1 |
| 14***76 | Connector; (S23, S25, S26) | 1 |
150-1213 Turbocharger Gp
| 10***54 | Nut | 3 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 6 |
219-9766 Turbocharger Gp
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
| 16***92 | Cartridge Group-Turbocharger | 1 |
6i-4195 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***66 | Gasket | 1 |
| 10***17 | Elbow-Exhaust | 1 |
118-8384 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 7C***29 | Housing As | 1 |
138-2077 Turbocharger Gp
| 13***77 | Turbocharger Group | 1 |
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
Basic Engine
139-4669 Camshaft Gp
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
| 13***11 | Washer | 1 |
6i-0421 Camshaft Gp
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 13***30 | Camshaft | 1 |
133-9820 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
6i-0643 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
156-0972 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 11***04 | Seal-O-Ring | 1 |
| 11***05 | Seal-O-Ring | 1 |
131-4698 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 11***04 | Seal-O-Ring | 1 |
131-5107 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 11***02 | Filler As | 1 |
105-4157 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 10***57 | Cover Group-Valve Mechanism | 1 |
139-4664 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
125-0377 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 4 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 4 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-6725 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
209-5557 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
233-4742 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
139-4663 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 11***40 | Housing As | 1 |
| 11***41 | Gasket | 1 |
106-8759 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
6i-4238 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-3873 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
6i-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
132-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-3884 Cylinder Block Gp-Short
| 6I***84 | Cylinder Block Group-Short | 1 |
132-9254 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***54 | Washer | 8 |
101-4072 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
6i-1195 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
101-3452 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
139-4666 Cylinder Head Gp
| 13***66 | Cylinder Head Group | 1 |
| 16***61 | Gasket-Cylinder Head | 1 |
| 16***20 | Pin | 2 |
164-6098 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
130-7007 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
155-6650 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
125-2551 Drain Gp-Engine Oil
| 12***51 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
138-7738 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 13***80 | Pulley-Fan Drive | 1 |
| 13***39 | Housing As | 1 |
114-4366 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 11***66 | Drive Group-Fan | 1 |
135-6394 Drive Gp-Fan
| 10***87 | Bolt; (M10x1.5x85-mm) | 4 |
| 13***79 | Pulley-Fan Drive | 1 |
| 13***38 | Housing As | 1 |
100-6321 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***21 | Flywheel Group | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
6i-0788 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 25***09 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
130-6352 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
101-3613 Housing Gp-Flywheel
| 06***23 | Dowel | 2 |
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
139-4668 Housing Gp-Front
| 10***77 | Stud | 2 |
| 13***68 | Housing Group-Front | 1 |
| 14***44 | Shield | 1 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
101-4071 Housing Gp-Front
| 10***71 | Housing Group-Front | 1 |
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
142-0348 Lifting Gp-Engine
| 14***53 | Plate | 1 |
| 14***48 | Lifting Group-Engine | 1 |
| 14***49 | Plate-Lifting | 1 |
6i-0652 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 6I***93 | Bolt; (M10x1.5x30-mm) | 2 |
| 6I***52 | Lifting Group-Engine | 1 |
114-4334 Mounting Gp-Alternator
| 10***04 | Bracket | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 10***17 | Washer | 1 |
131-5115 Mounting Gp-Alternator
| 10***04 | Bracket | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 10***17 | Washer | 1 |
112-5054 Mounting Gp-Engine
| 10***54 | Mount As-Engine | 2 |
| 11***54 | Mounting Group-Engine | 1 |
| 12***57 | Mount As | 1 |
124-7695 Mounting Gp-Fan Drive
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 12***95 | Mounting Group-Fan Drive | 1 |
| 13***62 | Stud | 4 |
138-8106 Mounting Gp-Fan Drive
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 13***68 | Stud | 4 |
| 13***69 | Extension-Fan | 1 |
138-1653 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
106-8851 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 10***51 | Pan Group-Oil | 1 |
139-0668 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
108-9620 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 10***20 | Piston & Rod Group | 1 |
| 11***20 | Kit-Piston Ring | 4 |
139-4665 Piston & Rod Gp
| 13***73 | Kit-Piston Ring | 4 |
| 13***65 | Piston & Rod Group | 1 |
| 15***90 | Piston As | 4 |
6i-0224 Piston & Rod Gp
| 06***58 | Bushing-End | 1 |
| 06***67 | Ring-Retaining | 2 |
| 06***79 | Rod As | 4 |
130-4648 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
141-0728 Plug Gp-Engine
| 14***28 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
139-4667 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
Braking System
174-1478 Lines Gp-Service Brake
| 10***63 | Hose As | 1 |
| 11***87 | Hose As | 1 |
| 11***88 | Hose As | 1 |
112-2034 Lines Gp-Service Brake
| 10***63 | Hose As | 1 |
| 11***34 | Lines Group-Service Brake | 1 |
| 11***87 | Hose As | 1 |
115-8488 Pump Gp-Hand
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
| 11***20 | Pump | 1 |
| 11***21 | Valve-Check | 2 |
1g-9759 Valve Gp-Brake & Shift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1G***76 | Valve Group-Check; (Brake Control) | 1 |
| 1G***78 | Locknut | 1 |
116-0043 Valve Gp-Brake Control
| 11***28 | Connector | 1 |
| 11***43 | Valve Group-Brake Control | 1 |
| 1G***59 | Valve Group-Brake & Shift | 1 |
Cooling System
146-0001 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 14***01 | Connection Group-Water | 1 |
114-4361 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***50 | Clamp-Hose | 6 |
| 10***19 | Clip | 1 |
186-5381 Cooler Gp-Fltr Base & Eng Oil
| 06***66 | Washer | 2 |
| 10***73 | Bolt; (M10x1.5x60-mm) | 2 |
| 11***44 | Head As-Oil Filter; (Engine) | 1 |
137-4546 Fan Gp
| 10***14 | Fan-Blower | 1 |
| 13***69 | Extension-Fan | 1 |
| 13***46 | Fan Group | 1 |
142-0524 Fan Gp-Blower
| 10***14 | Fan-Blower | 1 |
| 14***24 | Fan Group-Blower | 1 |
| 14***94 | Guard As-Fan | 2 |
112-7904 Fan Gp-Blower
| 11***04 | Fan Group-Blower | 1 |
| 11***43 | Fan-Blower | 1 |
| 12***35 | Guard As-Fan | 1 |
6i-4040 Lines Gp-Water
| 10***89 | Clamp-Hose | 2 |
| 13***54 | Connector As | 1 |
| 13***56 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
139-0642 Plug Gp-Water Lines
| 10***87 | Plug | 16 |
| 13***70 | Plug | 4 |
| 13***42 | Plug Group-Water Lines | 1 |
179-6896 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
6i-4722 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 12***12 | Gear; (18-Teeth) | 1 |
| 6I***44 | Seal | 1 |
149-0539 Pump Gp-Water
| 14***39 | Pump Group-Water | 1 |
| 15***38 | Seal | 1 |
| 20***29 | Seal-O-Ring | 1 |
133-9550 Pump Gp-Water
| 06***58 | Clamp-Hose | 2 |
| 10***11 | Gasket | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
6i-4724 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 14***39 | Pump Group-Water | 1 |
| 6I***93 | Bolt; (M8x1.25x80-mm) | 1 |
139-2614 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
6i-0442 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 6I***00 | Seal | 1 |
| 6I***42 | Pump Group-Water | 1 |
6i-0441 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 6I***93 | Bolt; (M8x1.25x80-mm) | 1 |
| 6I***41 | Pump Group-Water | 1 |
140-2760 Radiator & Hyd Oil Cooler Gp
| 08***92 | Valve As-Check | 1 |
| 11***48 | Hose; (Lower) | 1 |
| 11***94 | Mount As | 1 |
122-1896 Radiator & Hyd Oil Cooler Gp
| 08***92 | Valve As-Check | 1 |
| 11***48 | Hose; (Lower) | 1 |
| 11***49 | Hose; (Upper) | 1 |
Electrical And Starting System
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
112-5053 Alternator Gp-Charging
| 10***87 | Bracket | 1 |
| 11***53 | Alternator Group-Charging | 1 |
| 11***01 | Guard As-Alternator | 1 |
142-2612 Alternator Gp-Charging
| 11***39 | Spacer; (10.5x18x21-mm Thk) | 1 |
| 14***11 | Strap | 1 |
| 14***12 | Bracket As | 1 |
105-7631 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 2 |
| 10***31 | Battery & Wiring Group | 1 |
| 10***32 | Strap-Grounding | 1 |
135-4917 Control Gp-Pump Electronic
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 10***14 | Seal-Interface | 1 |
| 13***17 | Control Group-Pump Electronic | 1 |
1g-5981 Control Gp-Pump Electronic
| 03***05 | Seal-O-Ring | 1 |
| 10***37 | Gasket | 1 |
| 10***38 | Cover | 1 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
104-2956 Electrical Ar
| 10***56 | Electrical Ar | 1 |
| 10***31 | Battery & Wiring Group | 1 |
| 10***33 | Wiring Group-Machine | 1 |
123-8656 Electrical Ar
| 10***31 | Battery & Wiring Group | 1 |
| 10***33 | Wiring Group-Machine | 1 |
| 12***56 | Electrical Ar | 1 |
162-3294 Lamp Gp-Flood -Vertical Mount
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-1439 Lamp Gp-Flood -Vertical
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***39 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 9X***55 | Body As-Lamp | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
117-8319 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***19 | Lamp Group-Registration Plate; -Eu | 1 |
| 13***49 | Screw-Lens | 2 |
127-1558 Lamp Gp-Signal
| 12***05 | Harness As-Lighting; (Signal) | 1 |
| 12***58 | Lamp Group-Signal | 1 |
| 12***59 | Lamp; (Running Lt, Stop, Turn Sig, Rh) | 1 |
121-2547 Lamp Gp-Signal
| 08***42 | Lamp Group; (Signal-Front) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***47 | Lamp Group-Signal | 1 |
127-1561 Lamp Gp-Signal
| 12***06 | Harness As-Lighting; (Signal) | 1 |
| 12***60 | Lamp; (Running Lt, Stop, Turn Sig, Lh) | 1 |
| 12***61 | Lamp Group-Signal | 1 |
121-5904 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***50 | Lamp; (Front, Rh)(Running/Turn Signal) | 1 |
121-5903 Lamp Gp-Signal
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Lamp; (Front, Lh)(Running/Turn Signal) | 1 |
146-8387 Lamp Gp-Warning Beacon
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
| 14***87 | Lamp Group-Warning Beacon | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
5e-6579 Lighting Gp-Flood
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
| 5E***79 | Lighting Group | 1 |
| 5E***99 | Lead As | 2 |
112-3204 Lighting Gp-Flood
| 11***04 | Lighting Group-Flood | 1 |
| 11***41 | Harness As | 1 |
| 12***56 | Bracket-Guard | 2 |
140-8098 Lighting Gp-Flood
| 12***98 | Harness As-Wiring | 1 |
| 14***98 | Lighting Group-Flood | 1 |
| 1A***21 | Grommet | 2 |
120-8201 Lighting Gp-Flood
| 12***98 | Harness As-Wiring | 1 |
| 12***01 | Lighting Group-Flood | 1 |
| 1A***21 | Grommet | 4 |
140-8097 Lighting Gp-Flood
| 14***97 | Lighting Group-Flood | 1 |
| 2H***20 | Lockwasher (11.38mm Id) | 2 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
135-3219 Lighting Gp-Roading
| 08***55 | Nut | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***49 | Lamp Group-Head & Signal; -Lh | 1 |
130-2475 Lighting Gp-Signal
| 12***06 | Mount As | 4 |
| 12***47 | Lamp Group-Signal | 4 |
| 12***07 | Housing As-Switch | 1 |
081-4135 Regulator Gp-Voltage
| 08***02 | Washer | 1 |
| 08***01 | Screw | 1 |
| 08***44 | Rotary Eccentric Relay | 1 |
120-3885 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***85 | Sensor Group | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
124-7706 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***85 | Clip | 2 |
130-4650 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 13***50 | Starting Aid Group; -Heater | 1 |
108-9621 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
152-7787 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***54 | Clip | 1 |
100-6929 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
1g-9963 Starting Motor Gp-Electric
| 10***29 | Starting Motor Group-Electric | 1 |
| 1G***63 | Starting Motor Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
143-0541 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
137-2666 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 13***66 | Switch Group-Pressure; -Engine Oil | 1 |
| 25***10 | Switch As-Pressure; (Engine Oil) | 1 |
9g-7641 Switch Gp-Start
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
108-3190 Switch Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***90 | Switch Group-Temperature; -Engine Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
106-0569 Warning Gp-Backup
| 10***69 | Warning Group-Backup | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
159-3859 Wiring Gp-Air Conditioner
| 15***08 | Plate | 1 |
| 15***09 | Plate | 1 |
| 15***17 | Button | 2 |
141-7891 Wiring Gp-Cab
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
116-0651 Wiring Gp-Cab
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***33 | Console Group-Instrument | 1 |
| 10***35 | Console Group-Operator | 1 |
114-8619 Wiring Gp-Cab
| 11***19 | Wire As | 1 |
| 11***20 | Wire As | 2 |
| 11***21 | Harness As | 1 |
105-7633 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
140-3695 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
147-4489 Wiring Gp-Machine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
141-7801 Wiring Gp-Platform
| 10***12 | Seal; (Interface) | 1 |
| 10***35 | Console Group-Operator | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 14 |
105-7629 Wiring Gp-Platform
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***29 | Wiring Group-Platform | 1 |
| 10***33 | Console Group-Instrument | 1 |
138-4376 Wiring Gp-Secondary Steering
| 13***72 | Harness As-Power | 1 |
| 13***73 | Harness As-Steering | 1 |
| 13***74 | Harness As-Panel | 1 |
Engine Arrangement
137-4829 Engine Ar
| 11***70 | Engine Ar-Primary | 1 |
| 13***46 | Fan Group | 1 |
| 13***47 | Muffler Group | 1 |
100-8184 Engine Ar
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***21 | Flywheel Group | 1 |
| 10***84 | Engine Ar | 1 |
116-2870 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 10***76 | Filter Group-Fuel | 1 |
| 10***52 | Cylinder Head Group | 1 |
130-4800 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
140-3688 Installation Ar-Engine
| 10***06 | Control Group-Direction & Speed | 1 |
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 11***54 | Mounting Group-Engine | 1 |
112-1989 Installation Ar-Engine
| 10***96 | Muffler Group | 1 |
| 10***97 | Air Cleaner Group | 1 |
| 10***04 | Lines Group-Fuel | 1 |
Frame And Body
112-2055 Bumper Gp
| 11***55 | Bumper Group | 1 |
| 11***83 | Scraper Group-Padded Drum | 1 |
| 11***16 | Shim | 6 |
180-0632 Bumper Gp-Drum
| 18***32 | Bumper Group-Drum | 1 |
| 18***34 | Scraper Group-Padded Drum | 1 |
| 19***22 | Shim | 4 |
171-4691 Bumper Gp-Drum
| 17***91 | Bumper Group-Drum | 1 |
| 17***92 | Bumper As | 1 |
| 8T***01 | Nut (M24 X 3 Thd); (M24x3.00 Thd) | 4 |
178-9144 Bumper Gp-Drum
| 17***44 | Bumper Group-Drum | 1 |
| 17***45 | Bumper As | 1 |
| 8T***01 | Nut (M24 X 3 Thd); (M24x3.00 Thd) | 4 |
175-0397 Bumper Gp-Drum
| 17***97 | Bumper Group-Drum | 1 |
| 17***71 | Scraper Group-Padded Drum | 1 |
| 8T***01 | Nut (M24 X 3 Thd); (M24x3.00 Thd) | 4 |
111-9815 Bumper Gp-Drum
| 11***15 | Bumper Group-Drum | 1 |
| 11***16 | Bumper As | 1 |
| 11***16 | Shim | 6 |
180-4030 Bumper Gp-Drum
| 18***26 | Scraper Group-Padded Drum | 1 |
| 18***30 | Bumper Group-Drum | 1 |
| 19***22 | Shim | 4 |
171-9634 Bumper Gp-Front
| 16***12 | Scraper | 12 |
| 16***19 | Scraper | 2 |
| 17***34 | Bumper Group-Front | 1 |
117-6064 Cowling Gp
| 11***64 | Cowling Group | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 12 |
133-0625 Cowling Gp
| 13***24 | Cowling As | 1 |
| 13***25 | Cowling Group | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 12 |
118-0511 Door Gp-Access
| 11***11 | Door Group-Access | 1 |
| 13***79 | Door As | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 8 |
118-0509 Door Gp-Access
| 11***09 | Door Group-Access | 1 |
| 13***78 | Door As | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 11 |
112-2056 Enclosure Gp-Engine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 09***12 | Bumper Plug, Rubber | 2 |
| 10***76 | Panel-Rear-Lh | 1 |
141-6962 Enclosure Gp-Engine
| 09***12 | Bumper Plug, Rubber | 2 |
| 10***64 | Door As | 1 |
| 10***66 | Door As | 1 |
105-7609 Enclosure Gp-Engine
| 09***12 | Bumper Plug, Rubber | 2 |
| 10***09 | Enclosure Group-Engine | 1 |
| 10***47 | Grill As | 1 |
113-8482 Frame As-Main
| 11***82 | Frame As-Main | 1 |
| 12***56 | Plate | 2 |
| 13***82 | Plate | 2 |
112-1855 Frame Gp
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 10***24 | Bushing-Spring | 2 |
| 10***25 | Bushing-Spring | 2 |
172-8825 Frame Gp-Main
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 10***24 | Bushing-Spring | 2 |
| 10***25 | Bushing-Spring | 2 |
118-0508 Grill Gp-Radiator
| 11***08 | Grill Group-Radiator | 1 |
| 6P***16 | Push Cap-.85 mm-On 3a***56 Sheet Assembly | 32 |
132-9762 Grill Gp-Radiator
| 13***61 | Grill As | 1 |
| 13***62 | Grill Group-Radiator | 1 |
| 13***94 | Insulation | 1 |
138-6123 Scraper Gp-Padded Drum
| 07***32 | Tip | 8 |
| 07***33 | Pin-Flexible | 8 |
| 13***23 | Scraper Group-Padded Drum | 1 |
180-0634 Scraper Gp-Padded Drum
| 07***32 | Tip | 16 |
| 07***33 | Pin-Flexible | 16 |
| 10***50 | Bar | 8 |
112-3583 Scraper Gp-Padded Drum
| 07***32 | Tip | 16 |
| 07***33 | Pin-Flexible | 16 |
| 11***94 | Scraper As | 1 |
175-2271 Scraper Gp-Padded Drum
| 07***32 | Tip | 12 |
| 07***33 | Pin-Flexible | 12 |
| 17***71 | Scraper Group-Padded Drum | 1 |
180-4026 Scraper Gp-Padded Drum
| 07***32 | Tip | 16 |
| 07***33 | Pin-Flexible | 16 |
| 10***50 | Bar | 8 |
183-5771 Scraper Gp-Padded Drum
| 13***23 | Scraper Group-Padded Drum | 1 |
| 18***34 | Yoke As-Blade | 1 |
| 18***71 | Scraper Group-Padded Drum | 1 |
183-5764 Scraper Gp-Smooth Drum
| 10***48 | Scraper | 2 |
| 10***94 | Bar-Adjustment | 4 |
| 10***95 | Plate | 2 |
105-7620 Scraper Gp-Smooth Drum
| 10***20 | Scraper Group-Smooth Drum | 1 |
| 10***94 | Bar-Adjustment | 4 |
| 10***97 | Scraper | 1 |
107-3949 Scraper Gp-Smooth Drum
| 10***48 | Scraper | 2 |
| 10***94 | Bar-Adjustment | 4 |
| 10***95 | Plate | 2 |
Fuel System
148-5456 Filter Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 4 |
101-3376 Filter Gp-Fuel
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***76 | Filter Group-Fuel | 1 |
| 13***96 | Filter Group-Fuel | 1 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
105-7604 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 10***25 | Separator Group-Water | 1 |
| 10***86 | Bracket | 1 |
143-4056 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 10***86 | Bracket | 1 |
| 10***87 | Tube As | 1 |
101-3900 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
| 03***93 | Ferrule | 2 |
101-3885 Lines Gp-Fuel Injection
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***12 | Bolt | 3 |
| 06***80 | Bolt; (M8x1.25-Thd) | 1 |
114-4336 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
115-1166 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
167-1179 Pump Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
115-1163 Pump Gp-Fuel Injection
| 10***86 | Kit-Pump Gasket; (Fuel Injection Pump) | 1 |
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 11***64 | Housing | 1 |
114-4340 Pump Gp-Fuel Injection
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 11***64 | Housing | 1 |
| 11***70 | Bolt | 2 |
114-4341 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
6i-0570 Pump Gp-Fuel Transfer
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 12***20 | Pump Group-Fuel Transfer | 1 |
101-3782 Pump Gp-Fuel Transfer
| 03***37 | Kit-Pump; (Fuel Transfer) | 1 |
| 10***82 | Pump Group-Fuel Transfer | 1 |
| 12***20 | Pump Group-Fuel Transfer | 1 |
101-3925 Separator Gp-Water
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
101-3924 Separator Gp-Water
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 10***24 | Separator Group-Water | 1 |
131-5114 Spring Gp-Governor
| 03***82 | Spring | 1 |
| 12***30 | Bracket | 1 |
| 13***14 | Spring Group-Governor | 1 |
105-7615 Tank & Mtg Gp-Fuel
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 05***33 | Gasket-Tank Unit | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
Hydraulic System
111-8993 Cap & Strainer Gp-Hyd Oil Fill
| 11***93 | Cap & Strainer Group-Hydraulic Oil Fill | 1 |
| 3G***61 | Gasket | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
1g-7089 Cylinder Gp-Hydraulic
| 03***69 | Bearing | 1 |
| 07***02 | Wire, Lock | 1 |
| 1G***89 | Cylinder As-Hydraulic | 1 |
112-6220 Cylinder Gp-Hydraulic
| 03***69 | Bearing | 1 |
| 07***02 | Wire, Lock | 1 |
| 08***23 | Seal | 1 |
138-2274 Cylinder Gp-Hydraulic
| 07***02 | Wire, Lock | 1 |
| 07***85 | Washer | 1 |
| 07***69 | Fitting, Grease | 1 |
105-7652 Filter & Mtg Gp-Hydraulic
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 08***94 | Indicator As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
122-1786 Filter Gp-Oil
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
133-5343 Filter Gp-Oil
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
077-5200 Gauge Gp-Sight
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
104-2962 Hydraulic Ar-Auxiliary
| 10***62 | Hydraulic Ar-Auxiliary | 1 |
| 10***51 | Cylinder & Mtg Group-Steering | 1 |
| 10***52 | Filter & Mtg Group-Hydraulic | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
105-7653 Lines Gp-Auxiliary Hydraulic
| 10***53 | Lines Group-Auxiliary Hydraulic | 1 |
| 10***82 | Hose As | 1 |
| 13***23 | Hose As | 1 |
174-1479 Lines Gp-Control
| 10***82 | Hose As | 1 |
| 10***84 | Hose As | 1 |
| 10***85 | Hose As | 1 |
148-8241 Lines Gp-Flushing
| 10***69 | Hose As | 2 |
| 10***70 | Hose As | 2 |
| 11***33 | Hose As | 1 |
111-8128 Lines Gp-Flushing
| 10***69 | Hose As | 2 |
| 10***70 | Hose As | 2 |
| 11***33 | Hose As | 1 |
148-8253 Lines Gp-Hydraulic Filter
| 10***61 | Hose As | 1 |
| 11***34 | Hose As | 1 |
| 12***12 | Hose As | 2 |
105-7655 Lines Gp-Hydraulic Filter
| 10***55 | Lines Group-Hydraulic Filter | 1 |
| 10***80 | Hose As | 1 |
| 10***61 | Hose As | 1 |
111-8127 Lines Gp-Hydraulic Oil Cooler
| 10***20 | Hose As | 1 |
| 10***78 | Hose As | 1 |
| 10***79 | Hose As | 1 |
111-8129 Lines Gp-Pilot
| 10***70 | Hose As | 3 |
| 10***72 | Hose As | 1 |
| 11***29 | Lines Group-Pilot | 1 |
105-5026 Motor Gp-Gear
| 05***23 | Dowel | 4 |
| 07***93 | Valve As | 2 |
| 10***26 | Motor Group-Gear | 1 |
109-3010 Motor Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 10***10 | Motor Group-Piston | 1 |
| 11***21 | Plug-Special | 2 |
111-0902 Motor Gp-Piston
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
| 10***53 | Bearing | 2 |
| 11***21 | Plug-Special | 2 |
127-5014 Pump Gp-Gear
| 11***95 | Kit-Pump | 1 |
| 11***01 | Gear-Helical | 1 |
| 11***02 | Nut-Sleeve | 1 |
105-5025 Pump Gp-Gear
| 10***25 | Pump Group-Gear | 1 |
| 11***94 | Seal-Backup | 2 |
| 11***95 | Seal | 2 |
145-8687 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 11***23 | Kit-Relief Shim; (Propel Motor) | 1 |
| 11***35 | Carrier-Shaft | 1 |
159-9836 Pump Gp-Piston
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 14***89 | Pump Group-Piston | 1 |
| 15***36 | Pump Group-Piston | 1 |
145-3623 Pump Gp-Piston
| 07***75 | Shim | 1 |
| 07***25 | Switch; (Neutral) | 1 |
| 08***53 | Bolt; (1/4-20x0.62-In) | 4 |
145-8689 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 11***23 | Kit-Relief Shim; (Propel Motor) | 1 |
| 11***23 | Spring | 1 |
122-0594 Pump Gp-Piston
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 12***94 | Pump Group-Piston | 1 |
| 12***95 | Pump Group-Piston | 1 |
105-2282 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 2 |
| 07***75 | Shim | 1 |
105-2281 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***05 | Seal-O-Ring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
122-0595 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 1 |
| 07***75 | Shim | 1 |
141-6964 Tank & Mtg Gp-Hydraulic
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***51 | Strap As-Hydraulic Tank | 2 |
105-7617 Tank & Mtg Gp-Hydraulic
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 10***17 | Tank & Mtg Group-Hydraulic | 1 |
| 10***65 | Tank As-Hydraulic | 1 |
112-3074 Valve & Mtg Gp-Blade
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 20***22 | Control Group-Blade | 1 |
| 2N***80 | Screw-Head; (1/4-20x0.75-In) | 2 |
111-8274 Valve & Mtg Gp-Bypass
| 11***74 | Valve & Mtg Group-Bypass | 1 |
| 11***75 | Valve-Bypass; (Hydraulic Oil Cooler) | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 3 |
105-7649 Valve & Mtg Gp-Flushing
| 10***49 | Valve & Mtg Group-Flushing | 1 |
| 10***15 | Valve Group-Flushing | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
116-0042 Valve & Mtg Gp-Flushing
| 11***75 | Valve-Needle | 1 |
| 11***76 | Elbow | 1 |
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
7x-8382 Valve Gp-Control
| 11***07 | Kit-Detent; (Valve Control) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 5L***18 | Bolt-Socket Head; (1/4-20x1.75-In) | 4 |
109-5915 Valve Gp-Flushing
| 08***89 | Valve; (Charge Relief) | 1 |
| 10***51 | Valve Group-Shuttle | 1 |
| 10***15 | Valve Group-Flushing | 1 |
Implements
178-8447 Blade Ar
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***81 | Yoke As-Blade | 1 |
178-8446 Blade Ar
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***81 | Yoke As-Blade | 1 |
175-2269 Blade Gp
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***49 | Blade Group-Leveling | 1 |
| 17***79 | Lines Group-Control | 1 |
178-8090 Blade Gp
| 07***70 | Bushing-Terminal | 1 |
| 12***78 | Washer; (25.5x85x12-mm Thk) | 4 |
| 13***74 | Cylinder Group-Hydraulic | 1 |
189-6235 Blade Gp-Leveling
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***71 | Plate As | 1 |
189-6234 Blade Gp-Leveling
| 11***74 | Valve & Mtg Group-Blade | 1 |
| 17***79 | Lines Group-Control | 1 |
| 17***71 | Plate As | 1 |
172-7949 Blade Gp-Leveling
| 07***70 | Bushing-Terminal | 1 |
| 11***79 | Spacer | 4 |
| 12***78 | Washer; (25.5x85x12-mm Thk) | 4 |
Lubrication System
114-4365 Filler Gp-Engine Oil
| 11***02 | Filler As | 1 |
| 11***03 | Cap; (Engine Oil Fill) | 1 |
| 11***04 | Seal-O-Ring | 1 |
119-1715 Filter Gp-Engine Oil
| 03***62 | Plug | 1 |
| 06***06 | Plug | 1 |
| 11***15 | Filter Group-Engine Oil | 1 |
101-3448 Fumes Disposal Gp
| 10***48 | Fumes Disposal Group | 1 |
| 10***49 | Hose; (Crankcase Breather) | 1 |
| 10***50 | Clamp-Hose | 1 |
108-8410 Gauge Gp-Oil Level (Dipstick)
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 12***47 | Gauge As-Oil Level (Dipstick) | 1 |
| 12***49 | Tube As | 1 |
114-2376 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***15 | Bolt | 3 |
| 10***12 | Tube | 1 |
6i-0252 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
139-4670 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
6i-0911 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
Machine Arrangement
172-8837 Chassis Ar
| 10***12 | Plate & Film Group; -English | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
| 14***62 | Enclosure Group-Engine | 1 |
112-2057 Chassis Ar
| 10***09 | Enclosure Group-Engine | 1 |
| 10***12 | Plate & Film Group; -English | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
112-1858 Chassis Ar
| 10***09 | Enclosure Group-Engine | 1 |
| 10***14 | Plate & Film Group | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
172-8838 Chassis Ar
| 10***14 | Plate & Film Group | 1 |
| 10***15 | Tank & Mtg Group-Fuel | 1 |
| 10***20 | Scraper Group-Smooth Drum | 1 |
138-4377 Conversion Ar-Roading
| 13***19 | Lighting Group-Roading | 1 |
| 13***77 | Conversion Ar-Roading | 1 |
| 13***48 | Steering Ar | 1 |
172-8841 General Ar
| 10***62 | Hydraulic Ar-Auxiliary | 1 |
| 12***56 | Electrical Ar | 1 |
| 13***00 | Engine Ar-Primary | 1 |
172-8840 General Ar
| 10***62 | Hydraulic Ar-Auxiliary | 1 |
| 12***56 | Electrical Ar | 1 |
| 13***00 | Engine Ar-Primary | 1 |
Operator Station
154-6318 Air Conditioner Ar
| 11***33 | Tube As | 1 |
| 15***74 | Latch-Door | 1 |
| 15***18 | Air Conditioner Ar | 1 |
183-5918 Cab Ar
| 11***72 | Lines Group-Cab Heater | 1 |
| 11***44 | Seat Group | 1 |
| 12***36 | Lines Group-Steering | 1 |
116-0044 Cab Ar
| 11***70 | Mounting Group-Cab | 1 |
| 11***72 | Lines Group-Cab Heater | 1 |
| 11***73 | Cylinder & Mtg Group-Tilt | 1 |
123-3878 Cab Gp
| 08***67 | Lamp; (24-Volt, 5-Watt) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***23 | Collar | 2 |
159-3860 Compressor Gp-Refrigerant
| 08***69 | Bolt-Socket Head; (M10x1.5x130-mm) | 1 |
| 15***70 | Compressor Group-Refrigerant | 1 |
| 15***10 | Bracket | 2 |
159-3867 Condenser & Mtg Gp-Refrigerant
| 08***00 | Lockwasher; (2.3mm Thk) | 4 |
| 15***71 | Condensor | 1 |
| 15***04 | Bracket | 1 |
109-1033 Console Gp-Instrument
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
| 10***33 | Console Group-Instrument | 1 |
140-3691 Console Gp-Instrument
| 10***16 | Plug | 1 |
| 10***42 | Diode Group | 3 |
| 10***08 | Film-Instrument | 0 |
109-1035 Console Gp-Operator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
| 10***35 | Console Group-Operator | 1 |
126-3629 Console Gp-Operator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
121-6951 Console Gp-Operator
| 03***32 | Board As-Terminal | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***20 | Film-Identification; (Operator Console) | 1 |
128-6558 Console Gp-Operator
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***35 | Console Group-Operator | 1 |
| 12***58 | Console Group-Operator | 1 |
105-7606 Control Gp-Direction & Speed
| 03***77 | Ball Joint | 1 |
| 07***17 | Switch, Neutral Start; (Secondary Brake/Neutral Pump) | 1 |
| 10***06 | Control Group-Direction & Speed | 1 |
7r-3147 Control Gp-Blade -Lever
| 12***21 | Kit-Cable | 1 |
| 1B***02 | Nut (.3125" Diameter); Nut-- Generator Line Leads | 2 |
| 1B***30 | Nut-- Flame Arrestor Or Adapter To Pipe Assembly | 2 |
132-8895 Cylinder & Mtg Gp-Tilt
| 08***19 | Seal-Rubber | 2 |
| 08***72 | Lever | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 2 |
115-8073 Cylinder & Mtg Gp-Tilt
| 06***51 | Clamp | 1 |
| 08***19 | Seal-Rubber | 2 |
| 08***96 | Adapter | 2 |
111-2548 Door Gp-Cab
| 10***41 | Handle | 1 |
| 10***44 | Latch As-Rotary | 1 |
| 11***26 | Window Group-Cab | 1 |
153-2672 Evaporator Gp-Refrigerant
| 15***72 | Evaporator Group-Refrigerant | 1 |
| 15***46 | Evaporator | 1 |
| 15***49 | Valve | 1 |
159-3836 Evaporator Gp-Refrigerant
| 15***72 | Evaporator Group-Refrigerant | 1 |
| 15***36 | Evaporator Group-Refrigerant | 1 |
| 15***53 | Bracket-Lh | 1 |
159-3868 Filter Gp-Cab Air
| 15***00 | Filter Element As-Cab Air | 1 |
| 15***15 | Bracket | 1 |
| 15***68 | Filter Group-Cab Air | 1 |
119-7867 Gauge Gp-Vibratory
| 10***89 | Guard-Magneto Sensor | 1 |
| 10***49 | Harness As-Sensor; (Vibratory) | 1 |
| 11***67 | Gauge Group-Vibratory | 1 |
153-9756 Gauge Gp-Vibratory
| 12***32 | Tachometer; (-Instrument) | 1 |
| 13***80 | Harness As-Sensor; (Vibratory) | 1 |
| 15***07 | Guard-Sensor | 1 |
108-7735 Guard Gp-Vandalism
| 10***51 | Cover | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 1G***95 | Bolt | 2 |
1g-6588 Control Gp-Handle
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***19 | Switch-Push Button; (Vibratory Select On/Off) | 1 |
| 10***21 | Cap | 1 |
1g-3752 Heater Gp-Cab
| 1G***52 | Heater Group-Cab | 1 |
| 1G***53 | Core As | 1 |
| 1G***72 | Turbine Group-Heater | 1 |
136-7204 Kit-Cab Mount
| 13***34 | Spacer | 2 |
| 13***37 | Bracket | 1 |
| 13***38 | Bracket | 1 |
7r-6606 Lever Gp-Propel
| 09***02 | Swivel | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 1 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
111-1366 Lever Gp-Propel
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
| 11***66 | Lever Group-Propel | 1 |
135-2929 Module Gp-Warning Indicator -Engine Temperature
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 13***29 | Lighting Group-Warning; -Engine Temperature | 1 |
159-3834 Lines Gp-Air Conditioner
| 15***75 | Hose As | 1 |
| 15***76 | Hose As | 1 |
| 15***77 | Hose As | 1 |
115-8072 Lines Gp-Cab Heater
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
124-7491 Mirror Gp-Rear View
| 12***91 | Mirror Group-Rear View | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
125-6573 Module Gp-Speed & Vibratory
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
197-5336 Module Gp-Speed & Vibratory
| 08***72 | Seal | 1 |
| 08***35 | Regulator As | 1 |
| 08***56 | Suspension Pad | 4 |
115-8070 Mounting Gp-Cab
| 08***97 | Washer | 2 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***51 | Mount As | 1 |
133-9645 Mounting Gp-Cab
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***89 | Panel | 1 |
| 11***72 | Panel-Front-Lh | 1 |
159-2040 Mounting Gp-Cab
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***89 | Panel | 1 |
| 13***34 | Spacer | 2 |
141-7800 Operator Ar
| 10***24 | Control Group-Steering | 1 |
| 10***26 | Lines Group-Steering | 1 |
| 10***28 | Seat Group | 1 |
104-2955 Operator Ar
| 10***55 | Operator Ar | 1 |
| 10***24 | Control Group-Steering | 1 |
| 10***26 | Lines Group-Steering | 1 |
176-0345 Operator Ar
| 10***24 | Control Group-Steering | 1 |
| 10***26 | Lines Group-Steering | 1 |
| 10***28 | Seat Group | 1 |
175-3178 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 11***25 | Door As | 1 |
| 11***04 | Plate As-Seat | 1 |
105-7627 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 10***27 | Platform Group-Operator | 1 |
| 10***26 | Platform As-Operator | 1 |
159-2776 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 10***80 | Boss | 1 |
| 10***26 | Platform As-Operator | 1 |
082-6396 Pump Gp-Cab Tilt
| 08***45 | Kit-Pump Repair | 1 |
| 08***96 | Pump Group-Cab Tilt | 1 |
| 08***27 | Lever-Control | 1 |
105-7621 Rops Gp
| 10***21 | Rops Group | 1 |
| 12***91 | Film-Warning | 1 |
| 22***61 | Rops As | 1 |
8y-6856 Seat Belt Gp
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
6c-7314 Seat Gp-Suspension
| 10***38 | Handle; (Reclining-Rh) | 1 |
| 10***39 | Handle-Height & Tilt | 1 |
| 13***31 | Kit-Arm Cushion; (Lh) | 1 |
6i-5381 Seat Gp
| 10***40 | Handle-Adjustment; (Lumbar) | 1 |
| 6I***79 | Kit; (Foam Seat) | 1 |
| 6I***80 | Kit-Foam Back; (Seat) | 1 |
116-0644 Seat Gp
| 11***43 | Plate | 2 |
| 11***44 | Seat Group | 1 |
| 12***56 | Belt-Tether | 2 |
105-7628 Seat Gp
| 10***28 | Seat Group | 1 |
| 10***29 | Seat Belt Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
9v-8184 Seat Gp-Suspension
| 03***43 | Nut; (5/16-18 Thd) | 4 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 4 |
| 4B***71 | Washer Pump Mounting Plate To Adjusting Strap | 4 |
9c-4449 Seat Gp
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 1 |
| 2K***61 | Screw-Machine; (3/8-16x1.5-In) | 1 |
120-8200 Seat Gp-Suspension
| 10***28 | Seat Group | 1 |
| 12***00 | Seat Group-Suspension | 1 |
9v-7924 Suspension Gp-Seat
| 02***24 | Locknut; (1/4-20-Thd) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 12 |
| 2K***11 | Pin (Spring-Outer) | 2 |
4i-9797 Suspension Gp-Seat
| 4I***97 | Suspension Group-Seat | 1 |
| 4I***98 | Damper Assembly. Kit | 1 |
| 8Y***05 | Kit-Bumper | 1 |
1g-3772 Heater Gp-Cab
| 10***98 | Motor | 1 |
| 10***56 | Plate-Base | 1 |
| 10***57 | Hood | 2 |
111-2525 Washer Gp-Window
| 11***25 | Washer Group-Window | 1 |
| 11***63 | Pump As-Washer | 2 |
| 11***88 | Tank As-Window Washer | 1 |
111-2526 Window Gp-Cab
| 11***26 | Window Group-Cab | 1 |
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
111-2529 Window Gp-Cab
| 11***29 | Window Group-Cab | 1 |
| 13***54 | Clamp-Window | 1 |
| 13***20 | Glass-Fixed | 1 |
Power Train
176-7313 Axle & Mtg Gp-Drive
| 17***88 | Axle Group-Drive | 1 |
| 17***13 | Axle & Mtg Group-Drive | 1 |
| 7X***65 | Bolt; (M24x3x180-mm) | 4 |
112-1942 Axle & Mtg Gp-Drive
| 11***42 | Axle & Mtg Group-Drive | 1 |
| 11***49 | Axle Group | 1 |
| 7X***68 | Bolt; (M20x2.5x180-mm) | 4 |
112-3749 Axle Gp
| 03***60 | Cup-Roller Bearing | 2 |
| 05***94 | Washer; (13.46x22.35x2.29-mm Thk) | 44 |
| 07***00 | Stud, Wheel | 24 |
175-2288 Axle Gp-Drive
| 03***60 | Cup-Roller Bearing | 2 |
| 05***94 | Washer; (13.46x22.35x2.29-mm Thk) | 44 |
| 07***00 | Stud, Wheel | 16 |
105-7639 Drive Gp-Drum
| 07***92 | Mount, Rubber Shock | 6 |
| 10***44 | Plate-Mounting | 1 |
| 10***94 | Plate | 3 |
147-3486 Drive Gp-Drum
| 10***10 | Motor Group-Piston | 1 |
| 10***00 | Seal-O-Ring | 1 |
| 14***86 | Drive Group-Drum | 1 |
149-7711 Drum Gp-Drive & Vibratory
| 14***86 | Drive Group-Drum | 1 |
| 14***10 | Drum Group-Smooth | 1 |
| 14***11 | Drum Group-Drive & Vibratory | 1 |
148-8272 Drum Gp-Drive & Vibratory
| 07***92 | Mount, Rubber Shock | 4 |
| 07***61 | Gasket | 1 |
| 07***04 | Bushing-Terminal | 1 |
153-7151 Drum Gp-Drive & Vibratory
| 14***86 | Drive Group-Drum | 1 |
| 15***51 | Drum Group-Drive & Vibratory | 1 |
| 15***55 | Drive Group-Support & Vibratory | 1 |
123-8601 Drum Gp-Padded
| 11***96 | Drum Group-Padded | 1 |
| 12***00 | Drive Group-Vibratory | 1 |
| 12***01 | Drum Group-Padded | 1 |
153-7160 Drum Gp-Padded
| 15***35 | Housing Group-Eccentric Weight | 1 |
| 15***60 | Drum Group-Padded | 1 |
| 16***34 | Pad-Drum | 108 |
112-3196 Drum Gp-Padded
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 07***64 | Pad | 108 |
| 07***54 | Retainer, Bearing | 2 |
112-2241 Drum Gp-Padded
| 10***39 | Drive Group-Drum | 1 |
| 11***64 | Drive Group-Vibratory | 1 |
| 11***41 | Drum Group-Padded | 1 |
123-5054 Drum Gp-Padded
| 11***55 | Bumper Group | 1 |
| 11***25 | Shim | 4 |
| 12***54 | Drum Group-Padded | 1 |
123-8602 Drum Gp-Smooth
| 11***50 | Drum Group-Smooth | 1 |
| 12***00 | Drive Group-Vibratory | 1 |
| 12***02 | Drum Group-Smooth | 1 |
123-5053 Drum Gp-Smooth
| 10***20 | Scraper Group-Smooth Drum | 1 |
| 11***15 | Bumper Group-Drum | 1 |
| 11***25 | Shim | 4 |
112-1852 Drum Gp-Smooth
| 10***39 | Drive Group-Drum | 1 |
| 11***50 | Drum Group-Smooth | 1 |
| 11***52 | Drum Group-Smooth | 1 |
149-7710 Drum Gp-Smooth
| 14***10 | Drum Group-Smooth | 1 |
| 15***35 | Housing Group-Eccentric Weight | 1 |
| 22***89 | Drum As-Smooth | 1 |
112-1850 Drum Gp-Smooth
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 07***54 | Retainer, Bearing | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
112-2035 Hydraulic Ar-Propel
| 10***45 | Motor & Mtg Group-Propel | 1 |
| 10***46 | Pump & Mtg Group-Propel | 1 |
| 10***49 | Valve & Mtg Group-Flushing | 1 |
175-0395 Hydraulic Ar-Propel
| 10***45 | Motor & Mtg Group-Propel | 1 |
| 10***49 | Valve & Mtg Group-Flushing | 1 |
| 10***50 | Valve Group-Propel | 1 |
171-6585 Installation Gp-Drum
| 17***85 | Installation Group-Drum | 1 |
| 17***64 | Shim; (3-mm Thk) | 6 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 12 |
112-3747 Installation Gp-Drum
| 11***47 | Installation Group-Drum | 1 |
| 11***25 | Shim | 6 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 6 |
126-1099 Installation Gp-Drum
| 11***52 | Drum Group-Smooth | 1 |
| 11***25 | Shim | 6 |
| 12***99 | Installation Group-Drum | 1 |
126-1097 Installation Gp-Drum
| 11***41 | Drum Group-Padded | 1 |
| 11***25 | Shim | 6 |
| 12***97 | Installation Group-Drum | 1 |
115-3983 Lines Gp-Propel
| 08***56 | Nut | 2 |
| 10***88 | Bar | 5 |
| 10***57 | Clamp-Block | 1 |
152-5047 Lines Gp-Propel
| 10***88 | Bar | 1 |
| 10***88 | Hose As | 1 |
| 10***90 | Hose As | 2 |
173-0361 Lines Gp-Propel
| 10***88 | Hose As | 1 |
| 10***90 | Hose As | 2 |
| 10***64 | Hose As | 1 |
105-7645 Motor & Mtg Gp-Propel
| 03***23 | Bolt-Self Locking; 4.45cm(1.75in)Lg Ea | 2 |
| 10***45 | Motor & Mtg Group-Propel | 1 |
| 11***02 | Motor Group-Piston | 1 |
210-7756 Planetary Gp-Final Drive
| 09***52 | Ring | 1 |
| 09***31 | Bolt; (Socket Head) (M10x1.5x120mm) | 32 |
| 13***64 | Disc-Friction | 3 |
179-0585 Planetary Gp-Final Drive
| 09***52 | Ring | 1 |
| 09***31 | Bolt; (Socket Head) (M10x1.5x120mm) | 32 |
| 13***64 | Disc-Friction | 3 |
109-3009 Planetary Gp-Final Drive
| 07***64 | Seal-O-Ring | 1 |
| 10***09 | Planetary Group-Final Drive | 1 |
| 11***62 | Spacer-Thrust | 1 |
112-1854 Power Train Ar
| 10***37 | Wheel & Tire Group | 1 |
| 11***52 | Drum Group-Smooth | 1 |
| 11***54 | Power Train Ar | 1 |
175-0396 Power Train Ar
| 10***35 | Wheel Group | 1 |
| 15***51 | Drum Group-Drive & Vibratory | 1 |
| 17***85 | Installation Group-Drum | 1 |
171-6588 Power Train Ar
| 10***37 | Wheel & Tire Group | 1 |
| 14***11 | Drum Group-Drive & Vibratory | 1 |
| 17***85 | Installation Group-Drum | 1 |
112-2036 Power Train Ar
| 10***35 | Wheel Group | 1 |
| 11***42 | Axle & Mtg Group-Drive | 1 |
| 11***36 | Power Train Ar | 1 |
105-7646 Pump & Mtg Gp-Propel
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***10 | Support As-Pump | 1 |
| 10***46 | Pump & Mtg Group-Propel | 1 |
152-3590 Pump & Mtg Gp-Propel
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***10 | Support As-Pump | 1 |
| 10***80 | Adapter | 1 |
172-4220 Shell Gp-Padded
| 16***00 | Shell As | 2 |
| 17***34 | Bumper Group-Front | 1 |
| 17***20 | Shell Group-Padded | 1 |
187-2763 Shell Gp-Padded
| 16***00 | Shell As | 2 |
| 17***34 | Bumper Group-Front | 1 |
| 18***63 | Shell Group-Padded | 1 |
183-5706 Shell Gp-Padded
| 16***00 | Shell As | 2 |
| 17***34 | Bumper Group-Front | 1 |
| 18***06 | Shell Group-Padded | 1 |
105-7650 Valve Gp-Propel
| 10***50 | Valve Group-Propel | 1 |
| 10***19 | Valve Group-Solenoid | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
109-5919 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***19 | Valve Group-Solenoid | 1 |
| 11***45 | Valve Group-Solenoid | 1 |
112-6545 Valve Gp-Solenoid
| 11***45 | Valve Group-Solenoid | 1 |
| 8X***80 | Kit-Solenoid | 1 |
109-9798 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
171-7273 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
105-7637 Wheel & Tire Gp
| 10***37 | Wheel & Tire Group | 1 |
| 17***73 | Wheel & Tire Group | 2 |
109-9797 Wheel & Tire Gp
| 08***27 | Plug | 1 |
| 10***83 | Wheel | 1 |
| 10***97 | Wheel & Tire Group | 1 |
109-8011 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***06 | Nut-Valve Stem | 1 |
| 07***92 | Valve | 1 |
105-7635 Wheel Gp
| 10***35 | Wheel Group | 1 |
| 10***11 | Wheel & Tire Group | 1 |
| 10***98 | Wheel & Tire Group | 1 |
Service Equipment And Supplies
127-8781 Cart Gp-Filter
| 00***45 | Sleeve | 2 |
| 00***39 | Elbow | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
124-0386 Film Gp
| 12***86 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***59 | Film-Notice; (Starting Procedure) | 1 |
124-0392 Film Gp
| 12***92 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***63 | Film-Notice; (Starting Procedure)(Engine Starting) | 1 |
124-0393 Film Gp
| 12***93 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***61 | Film-Notice; (Starting Procedure) | 1 |
124-0387 Film Gp
| 12***87 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***60 | Film-Notice; (Starting Procedure)(Engine) | 1 |
124-0390 Film Gp
| 12***90 | Film Group | 1 |
| 13***39 | Washer; (3.2x9x0.5-mm Thk) | 4 |
| 3E***62 | Film-Notice; (Starting Procedure)(Engine Starting) | 1 |
114-5205 Film Gp
| 11***05 | Film Group | 1 |
| 3E***58 | Film-Notice; (Starting Procedure) | 1 |
| 5P***44 | Film Warning; On Front Vertical Surface Of Platform On Right Side & Left Side Of Fuel Tank Under The Grab Irons | 2 |
128-4239 Flushing Gp-Drum
| 00***07 | Elbow; (90 Degree) | 1 |
| 12***88 | Adapter | 1 |
| 12***89 | Valve-Ball | 1 |
128-4238 Flushing Gp-Drum
| 12***93 | Connector | 1 |
| 12***81 | Cart Group-Filter | 1 |
| 12***38 | Flushing Group-Drum | 1 |
128-4240 Flushing Gp-Drum
| 12***93 | Connector | 1 |
| 12***90 | Valve-Ball | 1 |
| 12***40 | Flushing Group-Drum | 1 |
105-7614 Plate & Film Gp
| 10***14 | Plate & Film Group | 1 |
| 11***94 | Film; (Cs-433c) | 2 |
| 11***05 | Film Group | 1 |
105-7612 Plate & Film Gp
| 10***12 | Plate & Film Group; -English | 1 |
| 11***05 | Film Group | 1 |
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
Steering System
105-7624 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***43 | Steering Column Group | 1 |
123-2337 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 11***42 | Pump Group-Metering; (Hmu) | 1 |
105-7651 Cylinder & Mtg Gp-Steering
| 03***69 | Bearing | 2 |
| 07***40 | Spacer; (1-mm Thk) | 8 |
| 07***08 | Bushing-Terminal; (16 Ga.) | 8 |
138-6140 Lines Gp-Secondary Steering
| 10***19 | Hose As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
123-2336 Lines Gp-Steering
| 10***66 | Sleeve-Abrasion | 1 |
| 10***90 | Clamp-Block | 1 |
| 12***66 | Bar | 2 |
108-0054 Lines Gp-Steering
| 10***54 | Lines Group-Steering | 1 |
| 11***46 | Hose As | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 8 |
105-7626 Lines Gp-Steering
| 10***26 | Lines Group-Steering | 1 |
| 10***90 | Clamp-Block | 2 |
| 10***87 | Hose As | 1 |
138-6127 Mounting Gp-Accessory Module
| 13***27 | Mounting Group-Accessory Module | 1 |
| 14***00 | Plate As | 1 |
| 14***01 | Pump & Motor Group-Sec Steering | 1 |
105-7654 Pump & Mtg Gp-Steering
| 09***66 | Bolt; (M8x1.25x75-mm) | 1 |
| 10***25 | Pump Group-Gear | 1 |
| 10***54 | Pump & Mtg Group-Steering | 1 |
117-8842 Pump Gp-Metering
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
138-4448 Steering Ar
| 13***76 | Wiring Group-Secondary Steering | 1 |
| 13***48 | Steering Ar | 1 |
| 13***27 | Mounting Group-Accessory Module | 1 |
Vibratory System
153-7155 Drive Gp-Support & Vibratory
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 15***14 | Plate | 1 |
| 15***06 | Bracket | 1 |
123-8600 Drive Gp-Vibratory
| 07***61 | Gasket | 1 |
| 07***04 | Bushing-Terminal | 1 |
| 07***12 | Coupling, Splined | 1 |
112-2164 Drive Gp-Vibratory
| 07***92 | Mount, Rubber Shock | 4 |
| 07***61 | Gasket | 1 |
| 07***04 | Bushing-Terminal | 1 |
1g-8830 Support Gp-Vibratory
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***64 | Seal-O-Ring | 1 |
153-7035 Housing Gp-Eccentric Weight
| 12***39 | Seal | 2 |
| 12***40 | Bearing | 2 |
| 12***24 | Seal-O-Ring | 1 |
171-5851 Hydraulic Ar-Vibratory
| 14***52 | Pump & Mtg Group-Vibratory | 1 |
| 17***51 | Hydraulic Ar-Vibratory | 1 |
| 17***60 | Lines Group-Vibratory | 1 |
122-0592 Hydraulic Ar-Vibratory
| 12***51 | Console Group-Operator | 1 |
| 12***92 | Hydraulic Ar-Vibratory | 1 |
| 12***93 | Pump & Mtg Group-Vibratory | 1 |
116-0045 Hydraulic Ar-Vibratory
| 10***57 | Pump & Mtg Group-Vibratory | 1 |
| 11***85 | Lines Group-Vibratory | 1 |
| 11***45 | Hydraulic Ar-Vibratory | 1 |
115-3985 Lines Gp-Vibratory
| 08***56 | Nut | 2 |
| 10***88 | Bar | 5 |
| 10***38 | Clamp-Half | 2 |
173-0360 Lines Gp-Vibratory
| 11***36 | Hose As | 1 |
| 11***63 | Hose As | 1 |
| 13***08 | Clamp As | 4 |
148-8273 Lines Gp-Vibratory
| 10***88 | Bar | 1 |
| 11***36 | Hose As | 1 |
| 11***57 | Clamp | 1 |
153-7022 Motor & Mtg Gp-Vibratory
| 14***92 | Motor Group-Piston | 1 |
| 15***22 | Motor & Mtg Group-Vibratory | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
148-8268 Pump & Mtg Gp-Vibratory
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
| 14***68 | Pump & Mtg Group-Vibratory | 1 |
| 15***36 | Pump Group-Piston | 1 |
122-0593 Pump & Mtg Gp-Vibratory
| 10***84 | Tee-Face Seal | 2 |
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
| 12***93 | Pump & Mtg Group-Vibratory | 1 |
148-8252 Pump & Mtg Gp-Vibratory
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
| 12***27 | Harness As-Pump | 1 |
| 14***87 | Pump Group-Piston | 1 |
105-7657 Pump & Mtg Gp-Vibratory
| 10***84 | Tee-Face Seal | 2 |
| 10***81 | Pump Group-Piston | 1 |
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 2 |
104-8556 Shaft Gp-Eccentric Weight
| 10***56 | Shaft Group-Eccentric Weight | 1 |
| 6V***87 | Plug-Pipe; (1/2 Npf) | 2 |
| 7X***05 | Shot; (Requires 208 Oz Of Shot) | 12 |
147-0333 Shaft Gp-Eccentric Weight
| 14***92 | Shaft | 1 |
| 14***33 | Shaft Group-Eccentric Weight | 1 |
| 18***33 | Shot; (Steel)(10-Kg) | 0 |
159-9405 Support Gp-Vibratory -Drum
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 07***37 | Seal | 1 |
CP-433C serial number reference
The PIN plate is riveted to the compactor's main frame, look on the front frame section near the articulation hitch, or on the frame rail below the operator's platform; check both frame halves since the machine is articulated. The serial reads as 8 characters: the first 3 letters/digits are the prefix (identifies the production block/model configuration), and the remaining 5 digits are the sequential unit number within that block.
| Prefix | Identifies | Notes |
|---|---|---|
| 2JM | CP-433C padfoot vibratory compactor, early production block | Cat 3054 engine. Serial pool shared with the CS-433C smooth-drum sibling built on the same chassis (same prefix covers both drum configurations). Appears in fitment pairs with 3TM (frame, operator-platform wiring, padded-drum scraper), pointing to 3TM as the following block. Reported build era around mid-1990s comes from a single source, confirm exact year with dealer. |
| 1ZN | CP-433C padfoot vibratory compactor | Cat 3054 engine. Pairs with 2TN in shared fitments (steering metering pump, engine enclosure), indicating a closely sequential or parallel production block with 2TN. Reported mid-1990s build era is single-sourced, confirm with dealer. |
| 2TN | CP-433C padfoot vibratory compactor, concurrent with 1ZN | Cat 3054 engine. Documented alongside 1ZN in the same parts-fitment ranges, suggesting parallel or immediately sequential production with that prefix. No independent build-year source found, confirm with dealer. |
| 3TM | CP-433C padfoot vibratory compactor, follows 2JM block | Cat 3054 engine. Shares fitment ranges with 2JM (main frame, operator console, drum scraper), indicating this block runs after or alongside 2JM. No independent build-year source found, confirm with dealer. |
| 4JZ | CP-433C padfoot vibratory compactor, later production block | Cat 3054 engine. Pairs with 5BZ in the propel piston-pump fitment listing, indicating a shared production block with that prefix. Reported late-1990s build era is single-sourced, confirm with dealer. |
| 5BZ | CP-433C padfoot vibratory compactor, concurrent with 4JZ | Cat 3054 engine. Documented alongside 4JZ in the same propel-pump fitment range; likely the latest of the documented CP-433C prefixes. No independent build-year source found, confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar CP-433C use?
The CP-433C runs the Cat 3054T, a turbocharged four-cylinder diesel rated about 78 kW (105 hp) gross. It is mechanically governed with no engine ECM, so diagnostics run through gauges and warning lamps rather than a code reader.
What is the operating weight of the CP-433C?
Operating weight runs roughly 6.6 to 6.9 t (14,600 to 15,240 lb); the figure varies by source and by configuration such as canopy, blade, or drum type. Check the machine's data plate for the exact as-built weight.
What replaced the Caterpillar CP-433C?
Cat replaced the C-series with the E-series starting around 2001: the CP-433E carried the padfoot drum forward on the Cat 3054C engine, with the smooth-drum CS-433C succeeded by the CS-433E in the same generation change.
What CP-433C owners discuss
What's the reputation of the engine in the CP-433C among owners and mechanics?
The CP-433C runs the Cat 3054T turbocharged diesel, rated about 78 kW (105 hp) gross, sharing core architecture with the Perkins 1004 engine family used across many compact Cat machines of this era. Owners and techs flag the same weak points repeatedly: dry-sleeve cylinder liners and thin ring lands that don't tolerate sustained overheating. Once coolant temperature runs into the red even briefly, piston material can weld itself to the liner wall, with rod damage following. Turbocharger failures and low oil pressure complaints also recur, with low pressure often traced to a stuck or sludge-clogged relief valve rather than a bad pump. Keep the cooling system clean, change oil on interval, and treat any overheating event as a reason to inspect for internal damage before returning the machine to work.
Why does the drum sometimes lose vibration or run at the wrong amplitude?
Lost or reduced vibration on this machine usually comes down to a short list: damaged eccentric weight bearings that keep the shaft from turning freely, a broken vibratory motor coupling (motor spins but the weight shaft does not), or restricted oil flow through the vibratory circuit. One quirk specific to this system: overfilling the eccentric bearing lube reservoir raises the pressure needed to drive the weight shaft and can choke vibration on its own, so top up to the sight glass and no further. Amplitude is set by spherical steel shot that shifts inside the hollow eccentric weight depending on which way the weight shaft turns. A drum stuck on one amplitude setting instead of switching between high and low usually means the shaft isn't reversing fully, not a hydraulic fault elsewhere.
What's the common complaint about the propel/drive system?
The CP-433C shares its closed-loop hydrostatic propel circuit with its CS-431C and CS-433C siblings, and the most reported symptom is propel that engages sluggishly or shifts slowly between speed ranges. Diagnosis points to low charge pressure nearly every time: a plugged orifice in the piston pumps, oil too cold or too viscous, a plugged charge filter, low hydraulic oil level, a worn charge pump, or a plugged orifice in the brake-and-shift valve. Check oil level, filter condition, and oil grade first since those rule out the cheap causes before a pump teardown.
Are there known electrical or sensor issues on this machine?
A documented fix across this compactor family, including the CP-433C, is replacing the brake switch contact block. An intermittent brake-related fault or odd neutral/brake interlock behavior points to that block before a wiring hunt. Beyond that specific item, most electrical complaints on this vintage of machine (dropped vibration signal, erratic gauge readings) trace back to corroded or loose harness connectors at the flex points between drum yoke and frame, so check grounds and connector pins first. Have your dealer verify any brake-circuit repair before returning the machine to service.
What wear patterns show up on the drum shells, isolators, and articulation joint?
As the padfoot version of this platform, the CP-433C carries bolt-on curved shell segments over the drum rather than a smooth shell. Wear items specific to that setup are rounded or worn pad tips that stop kneading cohesive soil effectively, cracked shell segments at the welds under rocky ground, and shell mounting bolts that need periodic re-torque. Across this compactor class generally, the rubber isolator mounts between drum and frame are a known wear item, cracking first at the top outer edge. A common shop practice once cracking starts is rotating the mount 180 degrees to extend life before replacing the full set. The articulation/oscillation joint pins and bushings on a machine this size are a grease-and-inspect item rather than sealed-for-life (that came later on newer compactor generations), so listen for a knock in the pivot under load and check for play.
What should I check before buying a used CP-433C?
Start with the paperwork: match the hour meter to service records or an oil-sample history if available, and confirm the eccentric bearing lube was changed on the roughly 3-year/3,000-hour interval this system calls for. Then walk the machine: flex-test the rubber isolator mounts for cracking, especially the top outer crease; check padfoot shell segments for cracked welds or rounded/worn pad tips and confirm shell bolts are tight; check the articulation/oscillation joint for perceptible play. Run the engine and watch coolant temperature closely given this engine's known sensitivity to overheating; any history of running hot is a red flag for liner or piston damage even if it currently starts and runs fine. Cycle propel in both directions and feel for hesitation, which points to charge-pressure issues, and run the vibratory system through both amplitude settings to confirm it actually shifts. Have your dealer verify the brake switch and overall braking system condition before putting the machine back into daily service.
Is the CP-433C considered reliable, or is it prone to breakdowns?
Field experience splits cleanly along maintenance lines rather than pointing to one bad design. Techs who've worked on this engine and driveline generation put most serious failures down to skipped service rather than an inherent flaw. Machines that got the cooling system flushed on schedule, ran clean engine oil, and kept vibratory bearing lube at the correct level (not overfilled) tend to rack up hours without drama. Machines that ran hot even briefly, or sat with degraded hydraulic oil in the propel circuit, are the ones that show up with liner, turbo, or charge-pump failures. Treat a spotty maintenance history as a bigger red flag than raw hour count when evaluating a used unit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CP-433C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.