Caterpillarpaving compactorvibratory compactor
Caterpillar CD-54
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CD54 is a tandem vibratory asphalt roller, Cat's drum-steer entry in its paving-compactor line for intermediate and finish rolling on asphalt mats. Base operating weight runs about 9.5 tonnes (20,944 lb, roughly 10.5 US tons), with factory ballast options able to shift that figure by configuration. It is powered by a Cat 3054C turbocharged, direct-injection diesel rated at 74.5 kW (99.5 hp) gross at 2,200 rpm, a pre-Tier-4 engine with no exhaust aftertreatment. The machine rides on 1,700 mm (67 in) wide, 1,200 mm (47 in) diameter front and rear drums that split and offset roughly 1.3 m (51 in) for wide-mat coverage, and Cat built it in solid-drum and split-drum versions with an isolated, rotating operator's seat rather than a fixed console. It sits alongside the articulated-steer CB54 in Cat's roller lineup and was eventually succeeded by the CD54B.
The CD54B update swapped the mechanically governed 3054C for an electronically controlled C3.4B engine to meet Tier 4 Interim/Stage IIIB emissions rules, and added a handwheel-steering console; core compaction geometry, the 67 in drum width, dual high/low vibratory amplitude, and the filtered water-spray system carried over largely unchanged. Because the CD54 predates Tier 4 aftertreatment, it stays popular with contractors and rental fleets that want a simpler diesel system to maintain, and it remains common in the used market today. Parts demand on these units centers on drum scrapers, offset cylinders, vibratory bearings, water-spray hardware, and 3054C engine service items, since the drum-steer and split-drum layout is shared with only a narrow band of Cat and competitor rollers.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CD-54 specifications
Engine
| Engine model | Cat 3054C DIT — 4-cylinder, liquid-cooled, turbocharged direct-injection diesel, rated at 2200 rpm |
| Gross power (ISO 14396 / SAE J1995) | 74.5 kW (99.5 hp) |
| Net power (ISO 9249 / 80/1269/EEC) | 72 kW (98 hp) |
| Bore x stroke | 105 mm x 127 mm (4.13 in x 5.00 in) |
| Displacement | 4.4 L (269 in³) |
| Cylinders | 4 |
| Emissions certification | Meets U.S. EPA Tier 2 and EU Stage II off-highway emission standards. No published later-tier (Tier 3/Tier 4) revision found; the CD54 ran the 3054C DIT across its production. |
Weights
| Standard operating weight (w/ROPS/FOPS cab) | 9500 kg (20,944 lb) — includes lubricants, coolant, 80 kg (175 lb) operator, full fuel tank, full hydraulic system and half-full water tank |
| Maximum operating weight | 10,900 kg (24,030 lb) — with all attachments, full fluids and 80 kg (175 lb) operator |
| Weight at front drum | 4655 kg (10,263 lb) |
| Weight at rear drum | 4845 kg (10,681 lb) |
| Static linear load, standard | 28 kg/cm (153 lb/in) |
| Static linear load, maximum | 32 kg/cm (159 lb/in) |
Dimensions
| Overall transport length | 4270 mm (168 in) |
| Overall transport width | 1873 mm (74 in) |
| Overall height at ROPS/FOPS | 3042 mm (120 in) |
| Wheelbase | 3070 mm (121 in) |
| Ground clearance | 372 mm (14.5 in) |
| Curb (frame) clearance | 777 mm (30.5 in) |
| Drum width | 1700 mm (67 in) |
| Drum diameter | 1200 mm (47 in) |
| Drum shell thickness | 17 mm (0.67 in) |
| Drum offset (split-drum lateral travel) | 1300 mm (51 in) |
| Maximum compaction width (drum width plus full offset) | 3000 mm (118 in) |
Performance
| Travel speed, low range | 0-7 km/h (0-4.5 mph) |
| Travel speed, high range | 0-9 km/h (0-5.5 mph) |
| Turning radius, inside drum edge | 2800 mm (110 in) |
| Turning radius, outside drum edge | 4500 mm (177 in) |
| Articulation angle | 25° |
| Oscillation angle | ±8° |
| Vibration frequency, high/low | 53 Hz / 42 Hz (3180 / 2520 vpm) |
| Nominal amplitude, high/low | 0.62 mm / 0.34 mm (0.024 in / 0.013 in) |
| Centrifugal force per drum, high/low | 84 kN / 74.5 kN (18,900 lbf / 16,762 lbf) |
| Steering modes | Front, rear, coordinated front-and-rear, and crab (offset) steering, split-drum design |
| Gradeability | Not published in available factory literature — confirm with dealer for a specific job requirement |
Service capacities (summary)
| Fuel tank | 160 L (42.3 gal) |
| Cooling system | 28 L (7.4 gal) |
| Engine oil with filter | 9 L (2.4 gal) |
| Hydraulic system, including hoses | 82 L (21.6 gal) |
| Hydraulic tank | 49 L (12.9 gal) |
| Vibratory bearing lubrication, per drum | 8 L (2.1 gal) |
| Water spray tank | 750 L (198 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CD-54 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 9 L (2.4 US gal) | Cat 3054C DIT direct-injection turbo diesel (Tier 2 / Stage II, no aftertreatment). Cat DEO or Cat DEO-ULS diesel engine oil is the factory-recommended fluid. Viscosity by climate: SAE 15W-40 for -10 to 50 C (14 to 122 F); SAE 10W-30 for -18 to 40 C (0 to 104 F); Cat DEO-ULS Synthetic SAE 5W-40 extends the range to -30 to 50 C (-22 to 122 F); Cat DEO Cold Weather SAE 0W-40 covers down to -40 C (-40 F). |
| Cooling system | 28 L (7.4 US gal) | Cat Extended Life Coolant (ELC), premixed 50/50 with water, is preferred; gives freeze protection to about -37 C (-34 F) and boil protection above 106 C (223 F) in a pressurized system. Cat DEAC conventional heavy-duty antifreeze/coolant is an acceptable alternative, topped up with a supplemental coolant additive on a scheduled basis. |
| Fuel tank | 160 L (42.3 US gal) | Distillate diesel fuel meeting the factory distillate fuel specification. No. 2-D summer-grade fuel is standard; a No. 1-D blend is used in cold climates to lower the cloud and pour point. |
| Water spray tank (drum-wetting system) | 750 L (198 US gal) | Clean water only, drawn through the triple-filtered spray system. A freeze-protection kit for the water-supply lines is offered as optional equipment for cold-climate work. |
| Hydrostatic drive / hydraulic system and tank | Hydraulic tank 49 L (12.9 US gal); total system including hoses and drive motors 82 L (21.6 US gal) | Cat HYDO Advanced hydraulic oil is preferred for both the propel hydrostatic circuit and the steering/vibratory hydraulics. Viscosity by climate: HYDO Advanced 10 (SAE 10W) for -20 to 40 C (-4 to 104 F); HYDO Advanced 20 for -5 to 45 C (23 to 113 F); HYDO Advanced 30 for 10 to 50 C (50 to 122 F); Cat Bio HYDO Advanced biodegradable oil (ISO 46) covers -30 to 45 C (-22 to 113 F) and is used when the optional bio-oil fill is specified. Cat TDTO, Cat DEO/DEO-ULS, and Cat MTO are listed as alternate oils for this compartment at matching viscosity grades. |
| Vibratory drum bearing / pod housing (each drum) | 8 L (2.1 US gal) per drum, front and rear | Cat Synthetic Compactor Oil, a PAO-based synthetic gear-and-bearing lubricant of ISO 220 viscosity with no viscosity improvers, covers -20 to 50 C (-4 to 122 F). Ordinary API GL-4 or GL-5 gear oil is not approved for this sealed oil-bath eccentric-weight housing. |
| Grease points (spec only) | Not a fill capacity - lubricated at individual grease fittings | Cat Extreme Application Grease (NLGI 1 or 2, moly-fortified) covers the higher-load steering-cylinder pins and weight-bearing points; Cat Prime Application Grease or Cat Utility Grease suit lighter-duty points, chosen by load severity and ambient temperature per the standard compactor grease guide. The split-drum pod bearings, drum offset hitch, and articulation joints use maintenance-free tapered roller bearings that are sealed and greased for life at the factory, so they carry no scheduled grease points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CD-54 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the CD-54 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the 3054C engine and on the hydraulic tank at each scheduled interval; wear-metal trends flag vibratory-pump, propel-motor, or drum-bearing wear before a seal fails. Check the water-spray tank and its filtration stages for sediment that signals nozzle or spray-control wear. Listen for bearing whine or feel excess heat at the drum ends after vibrating; that is an early sign the vibratory bearing or eccentric-weight assembly needs attention before a shell failure develops.
Corrective & Common Repairs
Common CD54 fixes center on the drum offset system: reseal or replace offset cylinders and offset-linkage bushings when steering drifts under load. Worn or bent drum scrapers let mix build up on the shell and telegraph into the mat; replace them before they score the drum. Clogged spray nozzles or a fouled spray-filter screen cause streaking; flush the automatic water-spray circuit. On the 3054C, injector or lift-pump wear shows up as hard starting or smoke; pull an oil or fuel sample before swapping components.
Overhaul & Rebuild Points
Plan a rebuild around the vibratory drum assembly first: eccentric-weight bearings and shaft seals wear from constant high-frequency load and are the CD54's most common mid-life failure point. Propel and vibratory hydraulic pumps and motors come next; flow-test both before assuming a control valve is at fault. The 3054C engine typically reaches a top-end or in-frame overhaul window based on oil-sample trends and compression rather than a fixed hour figure. Reseal offset and steering cylinders during any drum-end teardown to avoid repeat labor.
Seasonal & Environment Servicing
Drain the water-spray tank, lines, and pump, or fit the factory freeze-protection kit, before any freezing-weather layup; a cracked spray manifold is the most common winter failure on this roller. Check coolant concentration for the expected low temperature and confirm the block heater, if fitted, works before cold starts. In hot, dusty asphalt work, clear packed fines from the radiator and oil-cooler fins daily and inspect rubber isolation mounts at the operator platform and engine cradle for heat-and-UV cracking each season.
CD-54 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 252-6338 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CD-54 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure data valid but below normal range (low oil pressure) | Low oil level, clogged oil filter, worn oil pump, or diluted/wrong-grade oil | Shut engine down immediately, check oil level and condition, inspect filter before restart |
| 100-03 | Engine oil pressure sensor circuit voltage above normal (open circuit or short to supply) | Damaged sensor wiring or connector, poor ground, or failed pressure sensor | Inspect sensor wiring and connector, test sensor output, replace sensor if out of spec |
| 110-00 | Engine coolant temperature data valid but above normal range (overheating) | Low coolant level, clogged radiator fins, slipping or failed fan drive, stuck thermostat, or failing water pump | Shut down and allow engine to cool, check coolant level and radiator condition, inspect fan drive and belt |
| 110-04 | Engine coolant temperature sensor circuit voltage below normal (short to ground) | Pinched or shorted sensor wiring, corroded connector, or failed sensor | Inspect sensor circuit for shorts, check connector condition, test and replace sensor if needed |
| 168-04 | Electrical system (battery) voltage below normal | Weak or sulfated battery, corroded/loose terminals, failing alternator, or slipping charge belt | Load-test battery, verify charging output at the alternator, clean and tighten all connections |
| 168-03 | Electrical system (battery) voltage above normal (overcharge condition) | Faulty voltage regulator in the alternator, or a poor ground causing a false high reading | Test charging system output against spec with the engine running, replace alternator/regulator if overcharging is confirmed |
| 190-08 | Engine speed/timing sensor signal abnormal (erratic frequency or pulse) | Damaged sensor, incorrect sensor air gap, debris on the timing wheel, or a wiring fault | Inspect sensor gap, clean debris from the timing wheel, check wiring, replace sensor if signal stays erratic |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CD-54 attachments & work tools
Machine type and work-tool scope
CD54/CD54B is a tandem vibratory asphalt roller with two steel drums (front and rear), not a bucket/tool-carrier machine. It has no quick-coupler system for swapping work tools; the drum shells themselves are the compaction tool and are fixed, not exchangeable in the field.
Drum arrangement (split vs solid)
The base CD54 (3054C engine) and the later CD54B (C3.4B engine) are both cataloged with a split-drum design as the core product line; front and rear drums pivot independently with several steering modes and can offset from each other by up to about 1.3 m (51 in) to widen compaction coverage. Cat separately catalogs a CD54B solid-drum variant alongside the split-drum version: split-drum favors mat quality in tight urban turning, solid-drum gives higher amplitude choices for tougher, thicker lifts, so drum type varies by configuration/series.
Drum size class
Standard drum width is about 1.7 m (67 in) with roughly 1.2 m (47 in) drum diameter on both series, giving a combined offset compaction width near 3 m (118 in). This puts the CD54 class in the 10-tonne-class tandem roller bracket used across CD54/CD54B.
Edge cutter
An edge cutter is offered as a factory option on both CD54 and CD54B configurators, used to trim and square the mat edge near the drum ends for a cleaner vertical joint face, adjustable from the operator's station. A detailed single-vs-dual side mounting mechanism is used on Cat's newer CB-series tandem rollers; that specific mechanism is not documented for CD54/CD54B, so treat it as unverified for this model.
Drum scraper and water-wetting system
Drums use scraper/cleaner bars working with an integrated two-pump spray-bar and nozzle system (with filtration ahead of the nozzles) to keep the steel shells free of asphalt pickup; these are standard fitted components serviced as maintenance items rather than swapped as attachments. Water tank capacity is about 750 L (198 US gal) for this weight class, with optional water distribution mats, cocoa (fiber) mats, and a freeze-protection kit for cold-weather operation. No padfoot/sheepsfoot drum shell kit applies to this tandem asphalt roller family; those shell kits belong to Cat's single-drum soil compactor line, not CD54.
Ballast / weight kit
A factory weight kit is listed as an option on the CD54 configurator to add ballast and shift operating weight and static linear drum load within the class; factory spec sheets show a step from about 9500 kg standard up toward roughly 10 900 kg maximum operating weight with the kit fitted. Exact kit mass alone is not published; confirm the specific kit weight with a dealer.
Chip-spreader-ready provision
A chip-spreader-ready option is listed on the CD54 factory configurator, indicating mounting and hydraulic provisions built in to support an auxiliary chip-spreading unit for surface-dressing/seal-coat work. No published kit contents or flow/pressure figures were found; treat as a dealer-order provision rather than a documented field-installed hydraulic kit, and confirm current availability on CD54B with a dealer since it is not documented for that configuration.
Vibratory arrangement
Vibration can be engaged independently on the front drum, rear drum, or both, with dual amplitude and dual frequency settings selectable for different mat thickness and mix requirements, plus automatic vibration control. Published centrifugal force is roughly 74.5-84 kN (16,762-18,900 lb) per drum at about 42-53 Hz on the CD54, with a closely comparable range on CD54B; this is a control-system arrangement built into the standard vibratory circuit, not a bolt-on tool, and figures vary by configuration/series.
Operator protection and cab options
Offered with an open ROPS structure and sun canopy/sun screen as base weather protection, plus handrails and floor mat, with an enclosed ROPS/FOPS cab and air conditioning available as factory options for cold or wet climates. An air-suspension heated seat is also offered as a comfort option, and the seat/console can rotate and slide to multiple positions for operating from either end.
Compaction measurement and telematics options
Cat Compaction Control is offered as an option to track pass counts and related data for quality-control documentation, layered onto the vibratory system rather than a physical work tool. Product Link telematics hardware and a data recording module are also available as factory or dealer-installed options for remote machine monitoring and record-keeping.
Lighting and visibility/guarding options
Optional packages include high-intensity discharge (HID) work lights, a warning beacon, additional external mirrors, and a drum-edge lighting package for tracking the drum edge relative to the mat joint in low light. A high-ambient cooling system option is also offered for hot-climate operation.
All CD-54 assemblies by section
Every catalogued assembly group for the Caterpillar CD-54. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
228-7571 Air Cleaner Gp
| 22***71 | Air Cleaner Group | 1 |
| 25***38 | Filter Element-Wtr Sep & Fuel | 1 |
231-0149 Cover Gp-Inlet Manifold
| 10***03 | Plate-Cover | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
227-9909 Muffler Gp
| 15***68 | Seal-O-Ring | 1 |
| 17***19 | Valve Group-Solenoid; (12-Volt)(Fuel Shutoff) | 1 |
| 22***09 | Muffler Group | 1 |
275-2925 Turbocharger Gp
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
Basic Engine
232-7528 Camshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 2 |
234-0251 Cover Gp-Valve Mechanism
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
359-0715 Crankshaft Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
232-7439 Crankshaft Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
232-7604 Cylinder Block Gp
| 15***55 | Adapter | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7606 Cylinder Block Gp
| 10***73 | Seal-O-Ring | 1 |
| 10***75 | Bearing | 1 |
| 10***76 | Clip | 1 |
232-7519 Cylinder Head Gp
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 19***81 | Support As-Engine | 1 |
232-7524 Cylinder Head Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 16***89 | Flywheel As | 1 |
303-6366 Drain Gp-Engine Oil
| 27***18 | Support As | 1 |
| 30***66 | Drain Group-Engine Oil | 1 |
| 33***01 | Guard As | 1 |
231-0047 Drive Gp-Accessory
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
186-5160 Drive Gp-Pump
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
230-7286 Flywheel Gp
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 1 |
| 23***86 | Flywheel Group | 1 |
285-6418 Guard Gp-Belt -Alternator
| 19***33 | Mount-Engine | 1 |
| 28***18 | Guard Group-Belt; -Alternator | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 3 |
348-5703 Guard Gp-Belt -Alternator
| 18***43 | Stud | 4 |
| 34***03 | Guard Group-Belt; -Alternator | 1 |
| 6H***16 | Plug-Protective | 10 |
223-7825 Housing Gp-Flywheel
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 12***02 | Tube As | 1 |
232-6179 Housing Gp-Front
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 22***05 | Gasket | 1 |
232-3713 Lifting Gp-Engine
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
186-5165 Mounting Gp-Engine
| 18***65 | Mounting Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
232-6206 Mounting Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 23***06 | Mounting Group-Engine | 1 |
232-2565 Pan Gp-Oil
| 23***65 | Pan Group-Oil; -Engine | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
230-8144 Pan Gp-Oil
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***44 | Pan Group-Oil; -Engine | 1 |
232-7442 Piston & Rod Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
232-6204 Plug Gp-Engine
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
| 23***04 | Plug Group-Engine | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
225-4317 Plug Gp-Engine
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***17 | Plug Group-Engine | 1 |
| 22***29 | Pump As-Engine Oil | 1 |
253-2479 Plug Gp-Engine
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 25***79 | Plug Group-Engine; -Cylinder Block | 1 |
| 25***69 | Connection Group-Water; (Temperature Regulator) | 1 |
230-7353 Pulley Gp-Crankshaft
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
360-7351 Pulley Gp-Crankshaft
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
232-7526 Valve Mechanism Gp
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
Braking System
253-2711 Lines Gp-Service Brake
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 2 |
| 14***42 | Connector Group | 1 |
| 14***74 | Elbow As | 1 |
333-5577 Lines Gp-Service Brake
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 16***61 | Nut; (M18x1.5-Thd) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
251-7592 Pump & Mtg Gp-Brake -Manual Release
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 1 |
| 25***92 | Pump & Mtg Group-Brake; -Manual Release | 1 |
| 31***44 | Steering Wheel Group | 1 |
333-5574 Pump & Mtg Gp-Brake -Manual Release
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 14***15 | Connector As | 1 |
| 14***90 | Elbow Group | 1 |
| 14***93 | Elbow Group | 1 |
229-9476 Pump Gp-Hand -Brake Release
| 13***89 | Clip; (Ladder) | 2 |
| 14***27 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
Cooling System
231-0038 Connection Gp-Water
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
354-1274 Cooler Gp-Engine Oil
| 11***79 | Gasket | 3 |
| 11***62 | Plate | 3 |
| 35***74 | Cooler Group-Engine Oil | 1 |
238-2799 Cooler Gp-Fltr Base & Eng Oil
| 20***00 | Universal Driveshaft, Mounting-Cable Tie; (Wrap) | 1 |
| 22***11 | Pipe-Exhaust | 1 |
| 23***99 | Cooler Group-Filter Base & Eng Oil | 1 |
230-7355 Pump Gp-Water
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***67 | Clamp-Hose | 2 |
| 14***53 | Stud | 3 |
317-7013 Radiator & Hyd Oil Cooler Gp
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 31***13 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 9X***00 | Seal-O-Ring | 1 |
334-7804 Radiator & Hyd Oil Cooler Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 1 |
| 11***18 | Clip | 2 |
228-8659 Tank & Lines Gp-Coolant
| 03***49 | Plug | 2 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 2 |
| 22***78 | Fitting-Compression | 2 |
Electrical And Starting System
321-5183 Alternator Gp-Charging -Engine
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
105-2813 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
228-9581 Battery & Wiring Gp
| 17***24 | Lamp; (12-Volt, 55-Watt, Hid)(Warning Beacon Lamp) | 1 |
| 22***81 | Battery & Wiring Group | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
252-5209 Control & Mtg Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
321-5831 Control Gp-Communication
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
228-9355 Electrical Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 4 |
| 13***47 | Harness As-Lighting; (Floodlights) | 4 |
232-6661 Glow Plug Gp
| 13***00 | Clip; (Tab) | 4 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
3e-7301 Lamp Gp-Dome
| 3E***01 | Lamp Group-Dome; -With Switch | 1 |
| 6V***44 | Nut - Self Locking (2nd Type) | 4 |
| 7X***32 | Washer-Hard; (11x36x6-mm Thk) | 16 |
9x-9484 Lamp Gp-Flood -Suspended
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
283-9272 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***84 | Clamp-Half | 4 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 08***51 | Lamp; (12-Volt, 15-Watt)(Roading Lights) | 6 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
151-2457 Lamp Gp-Head -Floodlight
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
256-0042 Lamp Gp-Registration Plate
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 20***00 | Universal Driveshaft, Mounting-Cable Tie; (Wrap) | 8 |
| 25***42 | Lamp Group-Registration Plate | 1 |
185-7016 Lamp Gp-Warning Beacon -Magnetic Mount
| 11***90 | Fuse; (10 Amp) | 14 |
| 11***91 | Fuse; (15-Ampere) | 4 |
| 11***92 | Fuse; (20 Amp) | 6 |
321-5821 Lighting Gp-Flood -Bumper
| 11***18 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 25***50 | Sensor Group-Speed | 1 |
298-1337 Lighting Gp-Flood
| 11***90 | Fuse; (10 Amp) | 5 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 14***39 | Relay As | 8 |
298-1338 Lighting Gp-Flood -Hid
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
250-6073 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
210-0162 Lighting Gp-Warning Beacon -Platform
| 21***62 | Lighting Group-Warning Beacon; -Platform | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
| 6I***94 | Nut; (M10x1.15-Thd) | 3 |
210-0161 Lighting Gp-Warning Beacon -Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
322-6816 Lighting Gp-Warning Beacon -Cab
| 31***39 | Starting Motor Group-Electric | 1 |
| 32***16 | Lighting Group-Warning Beacon; -Cab | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
306-7132 Panel Gp-Circuit Breaker
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 26***08 | Film-Identification; (Variable Speed Control) | 1 |
| 27***84 | Potentiometer As; (Conveyor Control, Rh) | 1 |
322-3998 Panel Gp-Fuse
| 2H***22 | Lockwasher | 2 |
| 32***98 | Panel Group-Fuse | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
322-3997 Panel Gp-Relay
| 17***44 | Switch Group-Magnetic | 1 |
| 17***45 | Switch Group-Magnetic | 1 |
| 32***97 | Panel Group-Relay | 1 |
250-4902 Sensor & Mounting Gp -Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***02 | Sensor & Mounting Group; -Steering | 1 |
255-6313 Sensor & Mtg Gp-Speed -Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***13 | Sensor & Mtg Group-Speed; -Propel | 1 |
261-4381 Sensor Gp-Speed -Vibratory
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 15***28 | Alarm As; (Backup) | 1 |
145-7028 Sensor Gp-Temperature -Hydraulic Oil
| 08***51 | Lamp; (12-Volt, 15-Watt)(Roading Lights) | 4 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
323-6678 Starting Motor Gp-Electric
| 11***80 | Switch Group-Magnetic; (Start Relay) | 2 |
| 13***00 | Clip; (Tab) | 3 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
323-5741 Starting Motor Gp-Electric
| 17***06 | Circuit Breaker As; (50-Ampere) | 1 |
| 19***73 | Strap-Cable | 2 |
| 20***00 | Universal Driveshaft, Mounting-Cable Tie; (Wrap) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***20 | Plug As-Connector; (2-Pin) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
265-4969 Switch Gp -Chipspreader
| 00***39 | Adapter-Pipe | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Clip; (Ladder) | 1 |
117-9080 Switch Gp-Magnetic
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
175-2344 Switch Gp-Magnetic
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Seal-Connector | 1 |
175-2345 Switch Gp-Magnetic
| 17***45 | Switch Group-Magnetic | 1 |
| 23***27 | Mount | 12 |
| 25***88 | Plate | 1 |
246-3192 Warning Gp-Backup
| 15***49 | Elbow As | 1 |
| 19***87 | Clamp | 2 |
| 24***92 | Warning Group-Backup | 1 |
348-6768 Wiring Gp-Bumper -Chipspreader
| 24***88 | Valve & Mtg Group-Solenoid; -Propel | 1 |
| 25***82 | Valve & Mtg Group-Flushing | 1 |
| 25***83 | Lines Group-Flushing | 1 |
308-3521 Wiring Gp-Cab
| 25***92 | Pump & Mtg Group-Brake; -Manual Release | 1 |
| 25***53 | Valve & Mtg Group-Solenoid; -Propel | 1 |
| 25***11 | Lines Group-Service Brake | 1 |
308-4454 Wiring Gp-Electric Starting
| 22***08 | Plate | 2 |
| 23***27 | Mount | 12 |
| 30***54 | Wiring Group-Electric Starting | 1 |
322-5708 Wiring Gp-Engine
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
| 10***03 | Plate-Cover | 11 |
| 10***49 | Plate | 1 |
322-1299 Wiring Gp-Machine
| 09***12 | Clip | 2 |
| 10***59 | Hose As | 2 |
| 10***03 | Plate-Cover | 9 |
306-6898 Wiring Gp-Platform -Console
| 14***25 | Connector As. | 1 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
| 16***08 | Connector Group | 1 |
267-8890 Wiring Gp-Shutoff -Fuel
| 13***89 | Clip; (Ladder) | 2 |
| 14***18 | Connector As | 2 |
| 14***25 | Connector As. | 2 |
Engine Arrangement
321-5826 Engine Ar
| 26***90 | Wiring Group-Shutoff; -Fuel | 1 |
| 30***87 | Engine Ar-Primary | 1 |
| 31***39 | Starting Motor Group-Electric | 1 |
267-8899 Engine Ar
| 22***80 | Engine Ar-Primary | 1 |
| 26***90 | Wiring Group-Shutoff; -Fuel | 1 |
| 26***99 | Engine Ar | 1 |
341-1402 Engine Ar
| 26***90 | Wiring Group-Shutoff; -Fuel | 1 |
| 30***36 | Engine Ar-Primary | 1 |
| 34***02 | Engine Ar | 1 |
344-7218 Engine Ar
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***86 | Flywheel Group | 1 |
309-3887 Engine Ar-Primary
| 18***60 | Drive Group-Pump | 1 |
| 18***65 | Mounting Group-Engine | 1 |
| 20***82 | Control Group-Governor | 1 |
329-2194 Engine Ar-Primary
| 1B***36 | Key-Woodruff | 1 |
| 22***67 | Camshaft | 1 |
| 32***94 | Engine Ar-Primary | 1 |
309-0736 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***86 | Flywheel Group | 1 |
228-4580 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 22***80 | Engine Ar-Primary | 1 |
228-7578 Installation Ar-Engine
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
Frame And Body
270-0181 Ballast Gp-Frame -Split Drum
| 22***20 | Plate | 12 |
| 27***81 | Ballast Group-Frame; -Split Drum | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 96 |
270-3843 Ballast Gp-Frame -Solid Drum
| 26***98 | Guard As | 4 |
| 27***43 | Ballast Group-Frame; -Solid Drum | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 8 |
228-9352 Bumper Ar
| 20***77 | Lever | 2 |
| 22***13 | Handle As | 1 |
| 22***15 | Handle As | 1 |
297-4303 Cover Gp -Front
| 29***03 | Cover Group; -Front | 1 |
| 30***14 | Rail As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
311-2292 Cover Gp
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 18***46 | Sleeve | 1 |
| 25***08 | Plate | 2 |
229-2709 Frame Gp-Front
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 18***46 | Sleeve | 1 |
| 1K***90 | Cone-Roller Bearing | 2 |
297-4304 Frame Gp-Main
| 29***01 | Insulation | 1 |
| 29***05 | Insulation | 1 |
| 29***06 | Insulation-Rear | 1 |
249-7151 Frame Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
229-2662 Guard Gp-Bottom -Solid Drum
| 12***74 | Latch-Spring | 1 |
| 17***10 | Plate As | 2 |
| 22***62 | Guard Group-Bottom; -Solid Drum | 1 |
266-8597 Guard Gp-Lighting
| 12***74 | Latch-Spring | 1 |
| 17***10 | Plate As | 2 |
| 23***88 | Clamp-Half | 4 |
303-8173 Handrail Gp
| 30***73 | Handrail Group | 1 |
| 30***62 | Step As | 1 |
| 30***63 | Step As | 1 |
304-7245 Handrail Gp -Cab Access
| 30***45 | Handrail Group; -Cab Access | 1 |
| 31***95 | Plate As | 1 |
| 31***96 | Plate As | 1 |
344-7523 Hitch Gp-Articulating
| 29***07 | Insulation; (Top) | 1 |
| 32***23 | Insulation; (Seal) | 1 |
| 34***23 | Hitch Group-Articulating | 1 |
344-7522 Hitch Gp-Oscillating
| 17***15 | Strap; (Dual Clamp) | 29 |
| 18***73 | Hose As | 1 |
| 25***38 | Hose As | 1 |
292-0894 Insulation Gp-Heat
| 09***40 | Clip | 2 |
| 11***94 | Hose As | 1 |
| 11***14 | Hose As | 1 |
269-2884 Mounting Gp-Registration -Italian
| 14***16 | Connector Group | 1 |
| 14***61 | Elbow Group | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
339-0278 Scraper Gp-Drum -Rear
| 14***16 | Connector Group | 1 |
| 14***61 | Elbow Group | 1 |
| 15***29 | Tee As | 1 |
339-0279 Scraper Gp-Drum -Front
| 19***41 | Cartridge As-Valve | 1 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 33***79 | Kit-Seal | 0 |
304-7365 Step Gp
| 23***43 | Knob | 1 |
| 30***65 | Step Group | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
265-4929 Support Gp-Hopper -Chipspreader
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 16***76 | Adapter As | 2 |
| 16***54 | Seal | 1 |
321-5818 Suppression Gp-Sound
| 10***05 | Plate | 2 |
| 10***06 | Plate As | 1 |
| 13***23 | Hose As | 1 |
Fuel System
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 12***72 | Bolt | 3 |
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
204-6982 Control Gp-Governor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***23 | Seal; (32-cm) | 0 |
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
260-3128 Filter & Lines Gp-Fuel
| 11***57 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
252-6334 Filter Gp-Water Sep & Fuel
| 10***13 | Alternator Group-Charging | 1 |
| 11***42 | Strap | 1 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
245-5768 Lines Gp-Fuel
| 03***97 | Boot | 1 |
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***03 | Plate-Cover | 2 |
328-7358 Pump Gp-Fuel Injection
| 22***81 | Battery & Wiring Group | 1 |
| 24***92 | Warning Group-Backup | 1 |
| 25***02 | Sensor & Mounting Group; -Steering | 1 |
236-8228 Pump Gp-Fuel Injection
| 23***28 | Pump Group-Fuel Injection | 1 |
| 29***12 | Controller | 1 |
| 32***10 | Electronics Group-Machine; (Vibratory) | 1 |
236-8229 Pump Gp-Fuel Injection
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***05 | Cap-Receptacle | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
233-9417 Pump Gp-Fuel Prm & Prim Filter
| 23***26 | Clip | 1 |
| 23***62 | Glow Plug; (12-Volt) | 4 |
| 23***17 | Pump Group-Fuel Prm & Prim Filter | 1 |
227-7260 Tank & Mtg Gp-Fuel
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
| 10***54 | Body As; (Lamp) | 1 |
Hydraulic System
177-6949 Actuator Gp-Pump -Propel
| 08***72 | Plug-O-Ring | 1 |
| 09***87 | Bolt-Socket Head; (M14x2x45-mm) | 4 |
| 11***80 | Bushing; (Internal) | 1 |
308-3883 Actuator Gp-Pump -Vibratory
| 22***77 | Valve Group-Bypass | 1 |
| 22***85 | Filter & Mtg Group-Hydraulic | 1 |
| 22***05 | Lines Group-Hydraulic Oil Cooler | 1 |
196-4233 Actuator Gp-Pump -Propel
| 03***70 | Seal-O-Ring; (7.59mm Id) | 1 |
| 08***72 | Plug-O-Ring | 3 |
| 11***17 | Seal-O-Ring | 1 |
087-1788 Cap & Strainer Gp-Hyd Oil Fill
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 13***72 | Cover | 1 |
| 14***21 | Hose As | 1 |
229-8085 Filter & Mtg Gp-Hydraulic
| 22***85 | Filter & Mtg Group-Hydraulic | 1 |
| 32***21 | Hose | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 11***02 | Hose As | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 20***84 | Hose As | 1 |
243-0581 Head Gp-Pump -Vibratory
| 10***03 | Plate-Cover | 5 |
| 14***45 | Hose As | 1 |
| 14***51 | Elbow Group | 1 |
329-9803 Head Gp-Pump -Propel
| 10***05 | Plate | 1 |
| 13***72 | Cover | 1 |
| 14***57 | Hose As | 1 |
308-3885 Head Gp-Pump -Vibratory
| 10***03 | Plate-Cover | 3 |
| 14***25 | Connector As. | 1 |
| 14***63 | Elbow Group | 1 |
233-8509 Head Gp-Pump
| 10***05 | Plate | 5 |
| 13***97 | Connector | 2 |
| 14***63 | Elbow Group | 1 |
228-7579 Hydraulic Ar-Auxiliary
| 22***79 | Hydraulic Ar-Auxiliary | 1 |
| 23***57 | Clamp-Half | 2 |
| 26***99 | Hose As | 1 |
333-7532 Lines Gp-Auxiliary Hydraulic
| 33***32 | Lines Group-Auxiliary Hydraulic | 1 |
| 34***48 | Valve-Relief; (Gear Motor) | 1 |
| 34***49 | Washer | 1 |
265-3920 Lines Gp-Drain -Engine Oil, Fuel
| 12***59 | Bearing-Roller | 1 |
| 14***93 | Pin | 2 |
| 22***56 | Rotating Group-Motor | 1 |
251-7683 Lines Gp-Flushing
| 12***17 | Bearing | 1 |
| 18***26 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
| 25***87 | Rotating Group-Motor; -Vibratory | 1 |
265-4928 Lines Gp-Hopper -Chipspreader
| 09***69 | Bolt | 8 |
| 13***45 | Bearing | 1 |
| 14***70 | Plug | 1 |
310-7174 Lines Gp-Hydraulic
| 03***34 | Seal-O-Ring | 1 |
| 09***94 | Ring-Retaining | 1 |
| 16***79 | Seal-Shaft | 1 |
335-9483 Lines Gp-Hydraulic -Sidecutter
| 08***72 | Plug-O-Ring | 1 |
| 09***46 | Ring; (Retaining) | 1 |
| 11***27 | Screw-Lock | 1 |
333-7530 Lines Gp-Hydraulic Filter
| 11***28 | Screw | 4 |
| 12***74 | Screw-Lock | 1 |
| 18***01 | Seal | 1 |
229-8805 Lines Gp-Hydraulic Oil Cooler
| 11***28 | Screw | 4 |
| 11***30 | Screw; (1-5/16-Thd) | 1 |
| 12***18 | Pin | 1 |
338-1037 Motor Gp-Gear -Hydraulic Fan
| 11***28 | Screw | 3 |
| 12***98 | Seal-Bonded | 8 |
| 12***38 | Pin-Joint | 2 |
253-4539 Motor Gp-Piston -Propel
| 12***32 | Piston | 9 |
| 12***33 | Spring-Cup | 1 |
| 12***38 | Plate-Retainer | 1 |
321-0639 Motor Gp-Piston -Propel
| 09***41 | Ring-Retaining | 1 |
| 11***57 | Pin | 1 |
| 11***40 | Cradle | 1 |
228-0454 Motor Gp-Piston -Vibratory
| 10***65 | Seal-Shaft | 1 |
| 11***63 | Roller-Bearing | 1 |
| 11***65 | Ring-Retaining | 1 |
197-6465 Motor Gp-Piston -Vibratory
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 12***67 | Disc-Slip | 1 |
338-8413 Pump Gp-Gear -Steering
| 09***41 | Ring-Retaining | 2 |
| 10***65 | Circlip | 1 |
| 11***45 | Shim; (1.2-mm Thk) | 1 |
187-3602 Pump Gp-Piston -Vibratory
| 14***39 | Bearing Assem. | 1 |
| 15***54 | Ring-Retaining | 2 |
| 18***02 | Pump Group-Piston; -Vibratory | 1 |
321-5132 Pump Gp-Piston -Propel
| 03***06 | Seal (Use As Required) | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
285-3599 Pump Gp-Piston -Propel
| 10***65 | Circlip | 1 |
| 11***51 | Bearing | 1 |
| 19***83 | Seal-Shaft | 1 |
197-6466 Pump Gp-Piston -Vibratory
| 14***25 | Piston Assem. | 9 |
| 14***26 | Spring Set | 1 |
| 14***34 | Plate-Retainer | 1 |
280-7343 Rotating Gp-Motor -Implement
| 12***42 | Plug-Pipe | 1 |
| 13***16 | Valve Group-Flushing; -Propel | 1 |
| 14***65 | Elbow | 1 |
226-2756 Rotating Gp-Motor
| 11***18 | Clip | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
251-1687 Rotating Gp-Motor -Vibratory
| 14***16 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
190-7632 Rotating Gp-Pump -Vibratory
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 1 |
256-9357 Rotating Gp-Pump -Hydraulic-Propel
| 24***81 | Flange | 1 |
| 25***57 | Rotating Group-Pump; -Hydraulic-Propel | 1 |
| 27***66 | Manifold | 1 |
256-8778 Rotating Gp-Pump -Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***68 | Connector | 1 |
| 14***99 | Insert-Nylon | 2 |
251-1733 Rotating Gp-Pump -Vibratory
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Connector Group | 1 |
| 14***25 | Connector As. | 1 |
276-8206 Rotating Gp-Pump -Propel
| 12***34 | Valve Group-Bypass; (Hydraulic Oil Cooler) | 1 |
| 19***64 | Body-Valve | 1 |
| 20***55 | Gasket | 1 |
335-8754 Tank & Mtg Gp-Hydraulic
| 08***04 | Tee-Straight Branch | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
283-1565 Valve & Mtg Gp-Auxiliary -Hydrostatic Braking Valve
| 22***73 | Kit-Seal; (Flow Control Valve)(Auxiliary Control Valve) | 1 |
| 24***61 | Seal-O-Ring | 1 |
| 28***65 | Valve & Mtg Group-Auxiliary; -Hydrostatic Braking Valve | 1 |
265-3472 Valve & Mtg Gp-Control -Chipspreader
| 26***72 | Valve & Mtg Group-Control; -Chipspreader | 1 |
| 27***28 | Kit-Seal | 1 |
| 27***43 | Valve-Check | 1 |
251-7682 Valve & Mtg Gp-Flushing
| 25***82 | Valve & Mtg Group-Flushing | 1 |
| 27***91 | Valve-Check | 2 |
| 27***92 | Valve-Check | 2 |
262-0891 Valve & Mtg Gp-Relief -Sidecutter
| 22***87 | Kit-Seal; (Counterbalance Valve) | 1 |
| 26***91 | Valve & Mtg Group-Relief; -Sidecutter | 1 |
| 27***93 | Kit-Seal | 1 |
337-4053 Valve & Mtg Gp-Sidecutter
| 1G***30 | Spring | 1 |
| 1G***31 | Plug | 1 |
| 1G***32 | Plug | 2 |
262-1611 Valve & Mtg Gp-Solenoid -Water Spray
| 03***43 | Seal-O-Ring | 2 |
| 20***48 | Solenoid | 1 |
| 20***65 | Seal | 1 |
279-6525 Valve & Mtg Gp-Solenoid -Auxiliary
| 19***53 | Gasket | 1 |
| 19***45 | Bolt-Socket Head; (M6x1x45-mm) | 1 |
| 20***35 | Pin | 2 |
162-2453 Valve Gp-Bypass -Hydraulic Oil Cooler
| 16***53 | Valve Group-Bypass; -Hydraulic Oil Cooler | 1 |
| 19***53 | Gasket | 1 |
| 19***45 | Bolt-Socket Head; (M6x1x45-mm) | 1 |
227-8377 Valve Gp-Bypass
| 12***75 | Screw-Lock | 1 |
| 12***89 | Valve-Bushing | 1 |
| 12***90 | Control-Piston | 1 |
321-0835 Valve Gp-Control -With Filter
| 16***13 | Ring-Backup | 1 |
| 32***35 | Valve Group-Control; -With Filter | 1 |
| 6E***07 | Locknut-Sealing | 1 |
348-2594 Valve Gp-Control -Chipspreader
| 11***45 | Spring | 1 |
| 16***15 | Retainer-Spring | 1 |
| 17***47 | Ring | 1 |
342-8435 Valve Gp-Control -Sidecutter
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 34***35 | Valve Group-Control; -Sidecutter | 1 |
| 6E***07 | Locknut-Sealing | 1 |
346-8702 Valve Gp-Flow Control -Steering
| 23***72 | Adapter | 1 |
| 23***73 | Valve | 1 |
| 34***02 | Valve Group-Flow Control; -Steering | 1 |
130-4816 Valve Gp-Flushing -Propel
| 13***16 | Valve Group-Flushing; -Propel | 1 |
| 24***81 | Flange | 1 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
237-9603 Valve Gp-Pump Control -Pressure-Vibratory
| 23***03 | Valve Group-Pump Control; -Pressure-Vibratory | 1 |
| 27***25 | Kit-Coil Nut | 1 |
| 33***19 | Coil | 2 |
290-0725 Valve Gp-Pump Control -Propel
| 27***99 | Coil-Solenoid | 2 |
| 27***25 | Kit-Coil Nut | 1 |
| 29***25 | Valve Group-Pump Control; -Propel | 1 |
290-2076 Valve Gp-Pump Control -Propel
| 29***76 | Valve Group-Pump Control; -Propel | 1 |
| 30***96 | Kit-Seal; (Solenoid Valve) | 1 |
| 30***97 | Kit-Coil Nut | 1 |
123-7557 Valve Gp-Relief -Pressure Override
| 12***57 | Valve Group-Relief; -Pressure Override | 1 |
| 25***05 | Sidecutter Group; -Split Drum | 1 |
| 26***11 | Valve & Mtg Group-Solenoid; -Water Spray | 1 |
152-1810 Valve Gp-Relief -Combination-Propel Pump
| 15***10 | Valve Group-Relief; -Combination-Hydrostatic Pump, Tow Release | 1 |
| 26***91 | Valve & Mtg Group-Relief; -Sidecutter | 1 |
| 26***11 | Valve & Mtg Group-Solenoid; -Water Spray | 1 |
152-1811 Valve Gp-Relief -Pressure Override-Propel Pump
| 12***07 | Roller As | 1 |
| 12***08 | Disc-Cutter | 1 |
| 15***11 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
177-7122 Valve Gp-Relief -Charge Pressure
| 12***07 | Roller As | 1 |
| 12***08 | Disc-Cutter | 1 |
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
233-9763 Valve Gp-Sequence
| 21***60 | Weight Group-Eccentric | 1 |
| 22***21 | Hub-Coupling | 1 |
| 23***63 | Valve Group-Sequence; -Propel Pump | 1 |
339-5296 Valve Gp-Solenoid -Rear Steer
| 09***12 | Clip | 4 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 10***03 | Plate-Cover | 4 |
339-5293 Valve Gp-Solenoid -Front Steer
| 25***40 | Valve & Mtg Group-Vibratory | 1 |
| 33***51 | Lines Group-Vibratory | 1 |
| 33***93 | Valve Group-Solenoid; -Front Steer | 1 |
279-6523 Valve Gp-Solenoid -Auxiliary
| 08***47 | Key-Woodruff | 1 |
| 18***02 | Fan; (Eccentric Weight) | 1 |
| 19***42 | Weight Group-Eccentric | 1 |
339-5017 Valve Gp-Solenoid -Sidecutter
| 08***47 | Key-Woodruff | 1 |
| 20***09 | Lever | 1 |
| 22***86 | Weight Group-Eccentric | 1 |
Implements
262-1619 Sidecutter Ar -Split Drum
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
262-1639 Sidecutter Ar -W/O Split Drum
| 14***18 | Connector As | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 19***65 | Motor Group-Piston; -Vibratory | 1 |
257-4205 Sidecutter Gp -Split Drum
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
296-2879 Sidecutter Gp
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 18***47 | Coupler As-Quick Disconnect | 2 |
310-3451 Sidecutter Gp -Without Split Drum
| 12***09 | Elbow | 2 |
| 14***88 | Elbow Group | 1 |
| 15***55 | Elbow Group | 1 |
Lubrication System
232-7378 Filter Gp-Engine Oil
| 23***78 | Filter Group-Engine Oil | 1 |
| 28***38 | Cap As; (Radiator) | 1 |
| 31***14 | Radiator As | 1 |
230-7578 Pump Gp-Engine Oil
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 2 |
| 12***23 | Seal; (32-cm) | 0 |
| 13***89 | Clip; (Ladder) | 1 |
205-8479 Valve Gp-Fluid Sampling -Engine Oil
| 00***90 | Elbow | 1 |
| 03***19 | Cap As-Radiator | 1 |
| 10***73 | Clip | 3 |
Machine Arrangement
297-5584 Chassis Ar
| 22***60 | Tank & Mtg Group-Fuel | 1 |
| 22***49 | Enclosure Group-Engine | 1 |
| 23***11 | Film Group; -Round Red Reflective | 1 |
265-1066 Chipspreader Ar
| 26***66 | Chipspreader Ar | 1 |
| 26***72 | Valve & Mtg Group-Control; -Chipspreader | 1 |
| 26***28 | Lines Group-Hopper; -Chipspreader | 1 |
297-5582 General Ar
| 22***78 | Installation Ar-Engine | 1 |
| 22***79 | Hydraulic Ar-Auxiliary | 1 |
| 22***52 | Bumper Ar | 1 |
Operator Station
255-7945 Air Conditioner Ar
| 00***73 | Terminal (To Horns) | 4 |
| 08***37 | Nut | 1 |
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 4 |
312-3371 Air Conditioner Gp -Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 23***06 | Gasket | 1 |
239-3473 Arm Gp-Window Wiper -Rear
| 09***10 | Setscrew-Socket; (M14x2x14-mm) | 4 |
| 23***73 | Arm Group-Window Wiper; -Rear | 1 |
| 33***44 | Pad-Rebound | 1 |
297-5586 Cab Ar
| 15***41 | Mount As | 2 |
| 29***86 | Cab Ar | 1 |
| 3E***83 | Sleeve | 2 |
321-7904 Cab Gp
| 15***41 | Mount As | 2 |
| 32***04 | Cab Group | 1 |
| 3E***83 | Sleeve | 2 |
3e-1908 Compressor Gp-Refrigerant
| 24***98 | Platform Group-Operator; -Console | 1 |
| 25***36 | Console Group-Operator; -Side | 1 |
| 25***37 | Control Group-Direction & Speed; -Electronic | 1 |
334-7749 Compressor Gp-Refrigerant
| 19***99 | Guard Group-Vandalism | 1 |
| 19***08 | Mounting Group-Platform; -Operator | 1 |
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
287-3280 Condenser & Mtg Gp-Refrigerant
| 19***99 | Guard Group-Vandalism | 1 |
| 19***09 | Mounting Group-Platform | 1 |
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
306-6903 Console Gp-Instrument
| 14***64 | Seal; (142-cm) | 0 |
| 19***28 | Cover | 2 |
| 19***32 | Plate | 2 |
251-7636 Console Gp-Operator -Side
| 09***75 | Pin-Spring | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 19***08 | Holder | 1 |
251-7637 Control Gp-Direction & Speed -Electronic
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 19***32 | Plate | 2 |
| 20***26 | Support As | 2 |
354-2286 Control Gp-Handle
| 35***86 | Control Group-Handle | 1 |
343-0721 Door Gp-Cab -Lh
| 20***32 | Rops Group | 1 |
| 34***21 | Door Group-Cab; -Lh | 1 |
| 3E***83 | Sleeve | 2 |
343-0714 Door Gp-Cab -Rh
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 23***94 | Rops Group | 1 |
| 23***84 | Handrail As | 1 |
202-0032 Floor Mat Gp
| 20***32 | Floor Mat Group | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
296-7678 Floor Mat Gp-Cab
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
| 29***78 | Floor Mat Group-Cab | 1 |
190-4199 Guard Gp-Vandalism
| 19***99 | Guard Group-Vandalism | 1 |
| 23***33 | Foam-Seat; (Bottom) | 1 |
| 23***37 | Armrest; (Lh) | 1 |
301-0585 Lines Gp-Air Conditioner
| 23***30 | Cover-Seat; (Back, Vinyl) | 1 |
| 23***32 | Cover-Seat; (Bottom, Vinyl) | 1 |
| 23***33 | Foam-Seat; (Bottom) | 1 |
254-2141 Lines Gp-Heater
| 13***06 | Visor As-Window | 1 |
| 19***82 | Spacer; (8.5x12.7x38.2-mm Thk) | 4 |
| 25***41 | Lines Group-Heater | 1 |
309-0068 Lock Gp-Rotation
| 21***69 | Film-Identification; (Versa Vibe)(Versa-Vibe) | 2 |
| 22***59 | Film-Instruction; (Versa Vibe, Read Omm)(Instruction) | 1 |
| 30***68 | Lock Group-Rotation | 1 |
321-6968 Mirror Gp-Rear View
| 30***18 | Bearing, Thrust, Film-Identification; (Cd54) | 2 |
| 32***68 | Mirror Group-Rear View | 1 |
306-6819 Mirror Gp-Rear View
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 30***19 | Mirror Group-Rear View | 1 |
323-8157 Module Gp-Speed & Vibratory
| 29***60 | Film-Identification; (Caterpillar) | 2 |
| 30***23 | Film; (Cat, Lh) | 1 |
| 30***70 | Film-Identification; (Cat, Rh)(Rh-Cat) | 1 |
223-6539 Module Gp-Warning Indicator
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
| 29***60 | Film-Identification; (Caterpillar) | 2 |
| 29***44 | Film-Identification; (Cat, Lh) | 1 |
330-5029 Motor Gp-Window Wiper
| 21***04 | Film; (Variable Speed Control) | 1 |
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
334-1619 Mounting Gp-Cab
| 21***03 | Film; (Variable Speed Control) | 1 |
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
190-4208 Mounting Gp-Platform
| 17***41 | Film-Caution; (Lift Eye, Tie-Down Location) | 1 |
| 19***08 | Mounting Group-Platform; -Operator | 1 |
| 20***35 | Film-Information; (Exterior Sound, 107-Db)(Exterior) | 1 |
190-4209 Mounting Gp-Platform
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 2 |
| 19***09 | Mounting Group-Platform | 1 |
249-7140 Operator Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
269-6876 Operator Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***30 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
269-6877 Operator Ar-Open Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***27 | Sender As-Temperature Switch; (Hydraulic Oil) | 1 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
297-5761 Platform Gp-Operator
| 29***61 | Platform Group-Operator | 1 |
198-4624 Platform Gp-Operator
| 19***24 | Platform Group-Operator | 1 |
243-3598 Platform Gp-Operator
| 24***98 | Platform Group-Operator; -Console | 1 |
251-7638 Platform Gp-Operator -Steering
| 25***38 | Platform Group-Operator; -Steering | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
229-0716 Rops Gp
| 22***16 | Rops Group | 1 |
202-2632 Rops Gp
| 20***32 | Rops Group | 1 |
321-9752 Seat Gp-Suspension -Cloth
| 32***52 | Seat Group-Suspension; -Cloth | 1 |
191-6162 Seat Gp-Suspension -Cloth
| 19***62 | Seat Group-Suspension; -Cloth | 1 |
322-7608 Seat Gp-Suspension -Vinyl
| 32***08 | Seat Group-Suspension; -Vinyl | 1 |
191-5351 Seat Gp-Suspension -Vinyl
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
254-0162 Tank Gp-Window Washer
| 25***62 | Tank Group-Window Washer | 1 |
319-4952 Visor Gp-Cab
| 31***52 | Visor Group-Cab | 1 |
345-1166 Window Gp-Door -Lh
| 34***66 | Window Group-Door; -Lh | 1 |
345-1168 Window Gp-Door -Rh
| 34***68 | Window Group-Door; -Rh | 1 |
Power Train
227-9562 Drum Gp-Compactor
| 21***81 | Shaft Group-Drive | 2 |
| 22***87 | Drum Group-Compactor | 2 |
| 22***62 | Drum Group-Compactor | 1 |
226-1787 Drum Gp-Compactor
| 22***87 | Drum Group-Compactor | 1 |
| 22***62 | Drum Group-Compactor | 1 |
| 22***56 | Hydraulic Ar-Propel | 1 |
228-9356 Hydraulic Ar-Propel
| 12***01 | Hub As-Coupling; (Propel Pump) | 1 |
| 12***09 | Elbow | 1 |
| 12***47 | Elbow | 1 |
253-4503 Hydraulic Ar-Propel
| 10***84 | Tee-Face Seal | 1 |
| 10***54 | Plate-Adapter | 2 |
| 12***01 | Hub As-Coupling; (Propel Pump) | 1 |
306-4157 Installation Gp-Drum
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***80 | Kit-Dust Cap; (Drive Shaft)(Drive Shaft) | 1 |
| 12***45 | Kit-Universal Joint; (Drive Shaft) | 2 |
333-5578 Lines Gp-Propel
| 14***25 | Connector | 1 |
| 14***27 | Connector Group | 4 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
253-2712 Lines Gp-Propel
| 11***33 | Washer; (11x50x6-mm Thk) | 1 |
| 11***16 | Coupling | 1 |
| 19***45 | Shaft Group-Drive | 1 |
253-9328 Motor & Mtg Gp-Propel
| 11***29 | Washer; (6.6x22x2-mm Thk) | 2 |
| 14***05 | Adapter Group | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
335-6397 Motor & Mtg Gp-Propel
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 25***85 | Kit-Seal; (Flow Divider Valve) | 1 |
| 25***85 | Valve-Solenoid | 2 |
228-9386 Power Train Ar -Solid Drum
| 22***86 | Power Train Ar; -Solid Drum | 1 |
| 27***30 | Plate | 1 |
| 32***01 | Plate | 2 |
228-0466 Power Train Ar -Split Drum
| 21***75 | Seal-O-Ring | 1 |
| 22***66 | Power Train Ar; -Split Drum | 1 |
| 24***52 | Kit-Seal; (Brake Valve) | 1 |
333-5576 Pump & Mtg Gp-Propel
| 22***84 | Bar Group-Spray | 2 |
| 22***09 | Frame Group-Front | 1 |
| 24***51 | Frame Group-Rear | 1 |
253-3532 Pump & Mtg Gp-Propel
| 25***32 | Pump & Mtg Group-Propel | 1 |
| 27***30 | Plate | 1 |
| 27***97 | Plate | 12 |
211-0581 Shaft Gp-Drive
| 13***25 | Bumper | 2 |
| 21***81 | Shaft Group-Drive | 1 |
| 21***49 | Latch As | 2 |
190-9845 Shaft Gp-Drive
| 19***45 | Shaft Group-Drive | 1 |
| 34***97 | Cover-Front | 1 |
| 7X***32 | Washer-Hard; (11x36x6-mm Thk) | 6 |
306-4165 Support Gp-Motor -Vibratory
| 16***94 | Spring-Flat Wire | 1 |
| 27***19 | Washer; (17x30x4-mm Thk) | 5 |
| 28***73 | Block | 1 |
246-0588 Valve & Mtg Gp-Solenoid -Propel
| 16***94 | Spring-Flat Wire | 1 |
| 24***88 | Valve & Mtg Group-Solenoid; -Propel | 1 |
| 27***19 | Washer; (17x30x4-mm Thk) | 5 |
253-0853 Valve & Mtg Gp-Solenoid -Propel
| 10***04 | Plate As | 1 |
| 15***87 | Plate As | 5 |
| 17***05 | Plate As | 2 |
290-7999 Valve Gp-Flow Divider -Propel
| 15***86 | Plate As | 1 |
| 26***82 | Bracket As | 1 |
| 29***99 | Valve Group-Flow Divider; -Propel | 1 |
187-2975 Valve Gp-Solenoid
| 10***04 | Plate As | 1 |
| 13***00 | Clip; (Tab) | 4 |
| 15***87 | Plate As | 5 |
Service Equipment And Supplies
305-5344 Film Gp -Platform
| 30***44 | Film Group; -Platform | 1 |
219-5970 Film Gp -Versa Vibe
| 21***70 | Film Group; -Versa Vibe | 1 |
300-0485 Film Gp
| 30***85 | Film Group | 1 |
231-3811 Film Gp -Round Red Reflective
| 23***11 | Film Group; -Round Red Reflective | 1 |
305-5345 Film Gp -Cab
| 30***45 | Film Group; -Cab | 1 |
300-0524 Film Gp-International
| 30***24 | Film Group-International | 1 |
300-0525 Film Gp-U.S.
| 30***25 | Film Group-U.S. | 1 |
322-3971 Plate & Film Gp -Biodegradable Hydraulic Oil
| 32***71 | Plate & Film Group; -Biodegradable Hydraulic Oil | 1 |
322-3970 Plate & Film Gp -Hydraulic Oil
| 32***70 | Plate & Film Group; -Hydraulic Oil | 1 |
269-4649 Plate & Film Gp
| 26***49 | Plate & Film Group | 1 |
297-8706 Plate & Film Gp
| 29***06 | Plate & Film Group | 1 |
344-8755 Plate & Film Gp
| 34***55 | Plate & Film Group | 1 |
Steering System
336-2008 Cylinder & Mtg Gp-Steering
| 11***73 | Seal-O-Ring | 2 |
| 14***10 | Cover | 1 |
| 14***11 | Cover | 1 |
333-7528 Lines Gp-Steering
| 00***64 | Seal-O-Ring | 2 |
| 10***32 | Spacer; (9.2x15.95x5.77-mm Thk) | 2 |
| 12***44 | Spring-Pressure | 2 |
259-0431 Pump & Mtg Gp-Steering
| 11***73 | Seal-O-Ring | 2 |
| 14***12 | Ring | 2 |
| 14***13 | Ring-Seal | 2 |
322-6563 Steering Column Gp
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2J***61 | Ring-Retaining | 1 |
| 32***63 | Steering Column Group | 1 |
322-4935 Steering Wheel Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
| 14***07 | Adapter As | 1 |
325-5197 Valve & Mtg Gp-Service Lock
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 32***97 | Valve & Mtg Group-Service Lock | 1 |
321-5851 Valve & Mtg Gp-Steering
| 08***72 | Plug-O-Ring | 2 |
| 11***79 | Bushing; (External) | 1 |
| 11***80 | Bushing; (Internal) | 1 |
333-7533 Valve Gp-Steering
| 12***57 | Valve Group-Relief; -Pressure Override | 1 |
| 12***62 | Seal-O-Ring | 1 |
| 16***13 | Ring-Backup | 1 |
Vibratory System
222-9885 Housing Gp-Eccentric Weight
| 12***09 | Elbow | 1 |
| 14***27 | Connector Group | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
204-2579 Housing Gp-Eccentric Weight
| 13***11 | Cap; (Tamper Resistant) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***59 | Elbow Group | 1 |
193-0908 Housing Gp-Eccentric Weight
| 12***09 | Elbow | 2 |
| 14***65 | Elbow | 1 |
| 14***88 | Elbow Group | 1 |
228-9358 Hydraulic Ar-Vibratory
| 16***80 | Kit-Service; (Counterbalance Valve) | 2 |
| 20***53 | Kit-Seal; (Valve)(Line, Boom) | 1 |
| 22***58 | Hydraulic Ar-Vibratory | 1 |
335-0951 Lines Gp-Vibratory
| 18***24 | Pump & Mtg Group-Vibratory | 1 |
| 26***18 | Motor & Mtg Group-Vibratory | 2 |
| 26***92 | Weight Group-Eccentric | 2 |
261-4818 Motor & Mtg Gp-Vibratory
| 19***08 | Housing Group-Eccentric Weight | 2 |
| 26***18 | Motor & Mtg Group-Vibratory | 1 |
| 26***13 | Motor & Mtg Group-Vibratory | 2 |
261-5513 Motor & Mtg Gp-Vibratory
| 22***85 | Housing Group-Eccentric Weight | 2 |
| 26***13 | Motor & Mtg Group-Vibratory | 3 |
| 28***23 | Pump & Mtg Group-Vibratory | 1 |
335-0952 Motor & Mtg Gp-Vibratory
| 20***79 | Housing Group-Eccentric Weight | 2 |
| 21***70 | Film Group; -Versa Vibe | 1 |
| 26***13 | Motor & Mtg Group-Vibratory | 2 |
288-1422 Pump & Mtg Gp-Vibratory
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
| 08***14 | Seal-O-Ring | 1 |
337-5144 Pump & Mtg Gp-Vibratory
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
288-1423 Pump & Mtg Gp-Vibratory
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
189-9224 Pump & Mtg Gp-Vibratory
| 18***24 | Pump & Mtg Group-Vibratory | 1 |
| 30***55 | Weight Group-Eccentric | 2 |
| 33***52 | Motor & Mtg Group-Vibratory | 2 |
197-4732 Shaft Gp-Eccentric Weight
| 11***95 | Cone-Bearing | 2 |
| 11***96 | Cup-Bearing | 2 |
| 14***69 | Socket-Hex Drive | 4 |
211-3663 Shaft Gp-Eccentric Weight
| 11***95 | Cone-Bearing | 2 |
| 11***96 | Cup-Bearing | 2 |
| 14***69 | Socket-Hex Drive | 4 |
251-6140 Valve & Mtg Gp-Vibratory
| 08***65 | Seal | 1 |
| 14***38 | Strainer; (Water Spray Nozzle) | 8 |
| 14***39 | Cap; (Water Spray) | 9 |
311-6358 Valve Gp-Vibratory
| 25***80 | Filter Element-Water; (Water Spray Filter) | 1 |
| 31***58 | Valve Group-Vibratory | 1 |
| 7H***44 | Seal | 1 |
256-3122 Vibratory Ar -5-Amplitude
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 01***24 | Bushing To Supply Port | 1 |
| 05***26 | Tee | 1 |
303-8754 Vibratory Ar -0.62-Amplitude
| 16***78 | Insert-Nylon | 1 |
| 17***15 | Strap; (Dual Clamp) | 3 |
| 19***04 | Bolt; (M6x1x40-mm) | 1 |
228-0457 Vibratory Ar -2-Amplitude
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 2 |
| 19***38 | Valve-Ball; (Water Spray, Additive Spray) | 1 |
| 19***64 | Filter Group-Water | 1 |
256-3123 Vibratory Ar -Versa Vibe
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 16***78 | Insert-Nylon | 1 |
| 17***15 | Strap; (Dual Clamp) | 3 |
256-3120 Vibratory Ar -2-Amplitude
| 00***14 | Coupling-Pipe | 1 |
| 12***90 | Valve | 1 |
| 13***55 | Hose; (8-cm) | 0 |
342-9242 Weight Gp-Eccentric
| 27***60 | Gauge As-Sight; (Water Tank) | 1 |
| 27***21 | Seal | 1 |
| 34***42 | Weight Group-Eccentric | 1 |
197-4742 Weight Gp-Eccentric
| 09***92 | Locknut; (M6x1-Thd) | 36 |
| 10***12 | Mat-Water; (Rubber)(170-cm) | 0 |
| 19***42 | Weight Group-Eccentric | 1 |
222-9886 Weight Gp-Eccentric
| 09***92 | Locknut; (M6x1-Thd) | 12 |
| 1G***09 | Mat-Water; (Cocoa) | 4 |
| 21***25 | Support As | 4 |
342-9243 Weight Gp-Eccentric
| 30***85 | Lines Group-Air Conditioner | 1 |
| 33***49 | Compressor Group-Refrigerant, Flexible Hose | 1 |
| 34***43 | Weight Group-Eccentric | 1 |
342-9831 Weight Gp-Eccentric
| 19***62 | Seat Group-Suspension; -Cloth | 1 |
| 25***41 | Lines Group-Heater | 1 |
| 29***78 | Floor Mat Group-Cab | 1 |
264-1092 Weight Gp-Eccentric
| 11***18 | Clip | 2 |
| 12***04 | Clamp-Half | 4 |
| 24***55 | Fitting-Elbow | 4 |
342-9241 Weight Gp-Eccentric
| 08***49 | Gasket | 1 |
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 19***03 | Cap; (Water Tank Fill) | 1 |
303-8755 Weight Gp-Eccentric
| 22***13 | Pump Group-Water Spray | 1 |
| 22***61 | Lines Group-Water Filter | 1 |
| 28***56 | Filter Group-Water | 1 |
342-9832 Weight Gp-Eccentric
| 31***71 | Air Conditioner Group; -Cab | 1 |
| 34***32 | Weight Group-Eccentric | 1 |
342-9833 Weight Gp-Eccentric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
Water System
229-2584 Bar Gp-Spray
| 19***53 | Plate | 1 |
| 20***60 | Bracket As | 1 |
| 22***84 | Bar Group-Spray | 1 |
194-4164 Filter Gp-Water
| 19***64 | Filter Group-Water | 1 |
| 19***60 | Condenser Group-Refrigerant | 1 |
| 3E***17 | Cap-Air Conditioner Valve | 1 |
286-2656 Filter Gp-Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
229-2661 Lines Gp-Water Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
310-7175 Lines Gp-Water Spray
| 20***80 | Floor Mat; (Lh) | 1 |
| 20***81 | Floor Mat; (Rh) | 1 |
| 20***82 | Floor Mat; (Rear) | 1 |
269-6939 Lines Gp-Water Spray -Cold Weather
| 11***18 | Clip | 1 |
| 13***00 | Clip; (Tab) | 4 |
| 26***39 | Lines Group-Water Spray; -Cold Weather | 1 |
336-0177 Lines Gp-Water Spray -Sidecutter
| 21***63 | Panel-Floor; (Rh)(Rh) | 1 |
| 21***64 | Panel-Floor; (Lh)(Lh) | 1 |
| 21***67 | Panel-Floor | 2 |
257-2312 Mat & Mtg Gp-Water -Rubber
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 4 |
| 20***63 | Cover | 1 |
| 20***39 | Plate | 2 |
257-2313 Mat & Mtg Gp-Water -Cocoa
| 10***05 | Plate | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***34 | Receiver-Refrigerant Dryer | 1 |
227-7513 Pump Gp-Water Spray
| 10***05 | Plate | 1 |
| 15***16 | Clamp-Half | 2 |
| 16***51 | Sleeve-Abrasion; (28.00in) | 0 |
297-5585 Spray Ar-Water
| 10***76 | Clamp-Half | 4 |
| 17***15 | Bearing | 2 |
| 17***28 | Knob | 1 |
320-3041 Tank Gp-Water
| 13***83 | Mirror-Convex | 4 |
| 13***25 | Bumper | 2 |
| 29***90 | Bracket | 4 |
297-5588 Tank Gp-Water
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 4 |
| 19***29 | Mirror As | 2 |
CD-54 serial number reference
On Cat tandem asphalt compactors like the CD-54/CD-54B, the PIN/serial tag is a riveted metal plate mounted on the main frame, usually near the operator's platform or console area or on the frame rail close to the articulation joint, separate from the engine's own serial plate under the hood. Read the first three characters as the serial prefix — it ties the unit to a specific model and engine build combination — and the digits after that as the sequential unit number within that prefix block.
| Prefix | Identifies | Notes |
|---|---|---|
| J5R | CD-54 (base model, pre-CD-54B) | Base CD-54 tandem split-drum asphalt compactor, powered by the Cat 3054C (3054 DIT) diesel rated about 74.5 kW (99.5 hp). Appears in parts records as J5R1-and-up. Ran ahead of the CD-54B update introduced around 2012; exact production end date is not documented — confirm with dealer for a precise date range. |
| GRT | CD-54B | CD-54B update to the electronically controlled Cat C3.4B diesel, about 75 kW (102 hp), meeting Tier 4 Interim / Stage IIIB emissions. GRT is one of several serial blocks documented for the CD-54B under this engine family. Whether it is the earliest CD-54B block is not documented — confirm with dealer for exact build year. |
| J9T | CD-54B | A CD-54B production serial block, same C3.4B engine family as GRT. More than one CD-54B serial block is documented under the same parts manual, and no spec or design change is tied specifically to the break between GRT and J9T — confirm with dealer if the distinction matters for parts fitment. |
Frequently asked questions
What engine does the Caterpillar CD54 use?
The CD54 runs a Cat 3054C turbocharged, direct-injection diesel rated at 74.5 kW (99.5 hp) gross at 2,200 rpm. It is a pre-Tier-4 engine with no exhaust aftertreatment; the later CD54B switched to a C3.4B engine to meet Tier 4 Interim/Stage IIIB rules.
What is the Caterpillar CD54's operating weight?
Base operating weight is about 9.5 tonnes (20,944 lb, roughly 10.5 US tons). Factory ballast or weight-kit options, plus solid- versus split-drum configuration, can shift the figure, so confirm the exact weight against the spec plate for a given unit.
What replaced the Caterpillar CD54?
Caterpillar carried the drum-steer, split/solid-drum concept forward in the CD54B, which added a C3.4B engine for Tier 4 Interim/Stage IIIB compliance and an updated handwheel-steering operator station, while keeping the same 1,700 mm (67 in) drum width and offset compaction approach.
What CD-54 owners discuss
What powertrain and propel-system quirks do operators report on the CD-54?
The most common complaint on this compactor platform is the machine refusing to move even after the parking brake releases. Techs usually find the culprit isn't the propel pump itself but a signal or restriction problem: corroded connectors between the joystick/controller and the propel valve, or a plugged passage in the brake-release circuit. Before condemning a pump, verify oil pressure at the drum drive motor matches what the pump is putting out, and check the hydraulic filter for metal or debris that points to internal pump wear. Sluggish or uneven propel between the two drums more often traces back to tired hydraulic oil or a loaded filter than a failed pump. Have your dealer verify hydraulic pressures before replacing the propel pump.
What wear pattern shows up in the drums and vibratory (exciter) system?
As a tandem vibratory roller, both drums on the CD-54 carry an eccentric weight shaft and bearing set running continuously in a wet, abrasive environment. Owners describe a grinding or humming noise plus a drop in compaction amplitude as the earliest signs of a worn exciter bearing. Continuing to run a machine in that state risks taking the eccentric shaft with it, since a seized or rough bearing stops the shaft turning freely and loads the gear train. Low oil level in the exciter housing is the most frequently cited root cause of premature bearing wear, so checking that level is treated as routine service rather than a fault-finding step.
Does the CD-54's engine change across model years, and what quirks come with each?
Yes. The base CD-54 runs a Cat 3054 direct-injection turbocharged engine rated around 74.5 kW (99.5 hp) at 2,200 rpm. The later CD-54B moved to the electronically controlled C3.4B, rated around 75 kW (102 hp), to meet Tier 4 Interim/Final and Stage IIIB/IV emissions rules, adding a diesel particulate filter and a requirement for ultra-low-sulfur diesel. On the earlier 3054-family engine, community reports commonly describe oil leaking past the gear case and turbo seals when crankcase pressure builds up, plus fuel lift-pump and injection-pump seal weeping into the engine oil over time. Fixes and parts differ by which engine generation your serial number actually carries, so confirm the engine tag before ordering seals, filters, or turbo components. Have your dealer verify the engine model and emissions tier against your serial number before ordering parts.
What issues come up with the split-drum offset steering and center hitch?
The CD-54's drum-steer, split-drum design lets each drum half turn independently and offsets roughly 1.3 m (51 in) for edge and confined-space work, and a center-articulating hitch is said to allow a few degrees of oscillation so both drums keep ground contact on uneven grade. Community buying and repair advice consistently flags the articulation/oscillation joint as one of the more expensive wear items on this class of roller -- play, knocking, or a clunk at the pivot under load is treated as a stop-and-inspect condition, not something to keep running through a season. Steering cylinder seal weeping is also a routine wear item reported on units with heavy offset-steering use. Have your dealer check articulation joint play and steering cylinder condition before returning the machine to service.
What electrical or sensor problems show up on these compactors?
Most "won't propel" or "vibrator only works sometimes" complaints on this compactor family trace back to wiring and connectors, not the controller or sensors themselves. Corrosion at harness connectors, chafed wiring near the articulation joint, and worn rocker switches or joystick inputs are the first things mechanics check. On Tier 4 units running the C3.4B's electronic controls, community advice is to pull stored fault codes with factory diagnostic software before chasing wiring, since an emissions-system or sensor fault can present symptoms that look purely electrical. Have your dealer pull and interpret fault codes with factory software before replacing any wiring or components.
Are there recurring complaints about the water spray system?
The water spray system is treated as mission-critical on this size of asphalt roller -- without spray, hot mix sticks to the drums almost immediately. The tank on this class of machine runs around 750 L (198 gal). Clogged spray nozzles and a worn or air-locked water pump are the most frequently reported causes of inconsistent or one-sided spray, and both get checked before assuming a switch or wiring fault. Community advice is to flush the system and clean strainers on a regular interval, especially after the machine sits idle between paving seasons, since sediment settling in the tank and lines is a common cause of nozzle clogging.
What should you check before buying a used CD-54?
Community buying advice for this class of tandem roller converges on a short checklist. Run the vibratory system on both drums and listen for exciter bearing noise or a loss of amplitude. Check the articulation/oscillation joint for play or knocking under load. Inspect the rubber drum isolator mounts for cracking or shearing, since worn isolators pass vibration into the frame and can damage electronics over time. Confirm the water spray system holds pressure and every nozzle fires evenly. Check hydraulic hoses, fittings, and the propel pump area for leaks, and pull the hydraulic filter to look for metal or debris. Identify which engine generation the machine carries -- 3054 DIT or C3.4B -- since that determines emissions-tier compliance, fuel requirements, and parts availability going forward. Have your dealer run a full inspection and pull complete fault-code history before you commit to purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CD-54 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.