Caterpillarpaving compactorvibratory compactor
Caterpillar CB-564D
Maintenance schedule, common problems & OEM parts breakdown
The Cat CB-564D is a tandem (double smooth-drum) vibratory asphalt compactor in Caterpillar's CB500 D-series, built for production paving on highways, city streets, county roads, and airport work. Every unit uses the Cat 3054C turbocharged diesel, rated at about 97 kW (130 hp) gross power. Operating weight with ROPS/FOPS runs about 12,600 kg (27,783 lb), with a 2.13 m (84 in) drum width. The D-series entered production around the mid-2000s and ran for roughly a decade, carrying PIN prefixes from C6D in early build to D4M in later production. Within the family it sits alongside the narrower CB-534D and the extra-wide CB-534D XW; Cat did not offer an XW variant of the 564 width.
The D-series update centered on the Versa-Vibe vibratory system: two selectable frequencies and two amplitude settings per drum, giving four force/amplitude combinations the operator can pick from the seat instead of running one fixed setup. A vertical-lift engine hood and simplified service points cut daily maintenance time versus the prior generation. Cat later retired the numeric-width naming (534/564) in favor of weight-class model names (CB13/CB15/CB16) for its next tandem-roller generation, so the CB-564D counts among the last of its naming line still at work. That, plus its simple 3054C powertrain and mechanically-adjusted vibratory controls, keeps steady demand for CB-564D parts and rebuilds in the used compaction-equipment market.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CB-564D specifications
Engine
| Engine model | Cat 3054C, turbocharged diesel, inline-4 cylinder |
| Gross power | 97 kW (130 hp) at 2,200 rpm, SAE J1995 |
| Net power | 93 kW (125 hp) per ISO 9249 and EEC 80/1269; 92 kW (124 hp) per SAE J1349 |
| Bore x stroke | 105 mm x 127 mm (4.12 in x 5.00 in) |
| Displacement | 4.4 L (268 in3) |
| Emissions certification | U.S. EPA Tier 2 equivalent, EU Stage II equivalent |
| Altitude capability | No power derate up to 2,134 m (7,000 ft) |
| Electrical system | 12V start system, 80-amp alternator, 950 CCA cold-start battery |
Weights
| Operating weight, standard machine (ROPS or ROPS cab) | 12,600 kg (27,783 lb) |
| Weight distribution, front drum | 6,340 kg (13,980 lb) |
| Weight distribution, rear drum | 6,260 kg (13,803 lb) |
| Maximum machine weight (full fluids, accessories, 80 kg/175 lb operator) | 13,507 kg (29,715 lb) |
| Static linear load at drum | 29.6 kg/cm (165 lb/in) |
Dimensions
| Overall length | 4.94 m (16 ft 2 in) |
| Overall width | approx. 2.31 m (91-92 in), figure varies slightly by print revision |
| Drum width | 2.13 m (84 in) |
| Drum diameter | 1.3 m (51 in / 4 ft 3 in) |
| Drum shell thickness | 18 mm (0.71 in) |
| Height to steering wheel | 2.32 m (8 ft 8 in) |
| Overall height at ROPS/FOPS | 3.13 m (10 ft 3 in) |
| Wheelbase | 3.64 m (11 ft 11 in) |
| Frame ground clearance | 306 mm (12 in) |
| Curb/hitch clearance | 870 mm (34.5 in) |
| Turning radius, inside drum edge | 3.94 m (12 ft 11 in) |
| Turning radius, outside drum edge | 6.07 m (19 ft 11 in) |
| Steering angle | 40 degrees each direction, frame oscillation +/-4 degrees |
Performance
| Travel speed, low range | 0-7.3 km/h (0-4.5 mph), forward and reverse |
| Travel speed, high range | 0-13 km/h (0-8 mph), forward and reverse |
| Vibration frequency (standard Versa Vibe system) | 42 Hz (2,520 vpm) low, 63.3 Hz (3,800 vpm) high |
| Nominal amplitude (standard Versa Vibe system) | 0.23-0.67 mm (0.009-0.026 in), depending on frequency/amplitude setting selected |
| Centrifugal force per drum (standard Versa Vibe system) | 76.7-112.6 kN (17,227-25,305 lb), depending on setting |
| Optional 5-amplitude vibratory system | single 42 Hz frequency; amplitude 0.41-1.03 mm (0.016-0.041 in); centrifugal force 55-138 kN (12,430-31,075 lb) per drum, depending on setting |
| Weight distribution / articulation | 50/50 front-to-rear weight split, centered articulation joint for true drum tracking |
| Gradeability | not published for this model |
Service capacities (summary)
| Fuel tank | 219 L (58 gal) |
| Cooling system | 19.5 L (5 gal) |
| Engine oil (with filter) | 9 L (2.4 gal) |
| Vibratory bearing/pod lubrication | 20 L (5.3 gal) |
| Hydraulic tank (fill-mark level; actual tank capacity is greater) | 60 L (15.8 gal) |
| Water spray tank | 1,100 L (290 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CB-564D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 9 L (2.4 US gal) | Cat DEO (API CI-4/CI-4 PLUS) or Cat DEO-ULS (API CJ-4) diesel engine oil. SAE 15W-40 for 14 to 122°F (-10 to 50°C) ambient; SAE 10W-30 for 0 to 104°F (-18 to 40°C). Cat DEO-ULS SYN SAE 5W-40 extends the cold end to -22°F (-30°C), and Cat DEO Cold Weather SAE 0W-40 covers down to -40°F (-40°C). Use the highest viscosity allowed for the coldest expected start-up temperature. |
| Cooling system | 19.5 L (5.0 US gal), machine total | Cat ELC (Extended Life Coolant) is preferred; Cat DEAC (conventional antifreeze/coolant) is acceptable. The air-to-air aftercooled 3054C requires a minimum 30 percent glycol mix, with 50 percent recommended. Water alone, or water with SCA or ELI only, is not allowed for this engine. A 50/50 glycol mix protects to -34°F (-37°C). |
| Fuel tank | 219 L (58 US gal) | Ultra low sulfur diesel (15 ppm sulfur max) or low sulfur diesel meeting Cat's distillate diesel fuel specification, equivalent to ASTM D975/EN590 grade No. 1-D or No. 2-D. Use a winter-blend or No. 1 grade fuel in cold climates for cloud point and pour point control. |
| Hydraulic system and tank (includes hydrostatic propel drive; no separate powershift transmission on this machine) | 60 L (15.8 US gal) to the full mark; actual system volume is higher | Cat HYDO Advanced 10 (SAE 10W) is the factory-fill oil for -4 to 104°F (-20 to 40°C) ambient. Cat HYDO Advanced 20 (SAE 20W) covers 23 to 113°F (-5 to 45°C), and Cat HYDO Advanced 30 (SAE 30) covers 50 to 122°F (10 to 50°C). Cat TDTO in the matching viscosity is an acceptable alternate. Cat Bio HYDO Advanced (ISO 46) covers -22 to 113°F (-30 to 45°C) where a biodegradable fluid is required. Charge oil is filtered to 10 microns. |
| Vibratory drum bearing housings and final drive planetary drums (oil-bath lubrication, both drums) | 20 L (5.3 US gal) combined | Cat Synthetic Compactor Oil, a PAO synthetic ISO 220 gear and bearing oil with no viscosity improvers, covers -4 to 122°F (-20 to 50°C). Do not substitute API GL-4 or GL-5 gear oil in this compartment; it is not suited to the eccentric weight bearings or the final drive planetary drum. |
| Grease (chassis, articulation, and vibratory system points) | No refill capacity; lubricate at scheduled grease points | Cat Extreme Application Grease, NLGI 1 or NLGI 2, for high-vibration, heavy-load points such as drum and weight bearings, oscillating pins, and steering cylinder ends, covering -31 to 104°F (-35 to 40°C) or -22 to 122°F (-30 to 50°C) respectively. Cat Prime Application Grease NLGI 2 suits medium-duty points, -4 to 104°F (-20 to 40°C). Cat Utility Grease NLGI 2 is acceptable for light-duty asphalt-mix service, -22 to 104°F (-30 to 40°C). The articulation hitch is sealed for life and needs no grease. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CB-564D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
Servicing the CB-564D beyond the schedule
Predictive Maintenance & Fluid Analysis
Sample 3054C engine oil and hydraulic oil at set intervals to track wear metals and catch turbocharger or injection-pump wear before failure. Monitor Versa-Vibe eccentric-weight bearing oil condition at each drum pod, since bearing wear is the costliest unplanned repair on this compactor. Track fuel filter differential pressure to flag injector contamination early. Check coolant condition given the turbocharged engine's heat load. Use these trends, not just the hour meter, to plan component replacement before a roadside breakdown.
Corrective & Common Repairs
Most CB-564D downtime traces to the vibratory system and drum edges: worn scraper bars let asphalt build up on the smooth drums, clogged water-spray nozzles cause pickup and scuffing, and hydraulic leaks at the eccentric-weight pod housings show up as oil residue on the drum shell. Check the articulated center-joint bushings if steering feels loose. On the 3054C, boost-hose leaks and turbocharger seal wear are common causes of smoke or power loss. Replace amplitude/frequency selector switches when Versa-Vibe settings stop responding.
Overhaul & Rebuild Points
Plan a full teardown of the Versa-Vibe eccentric-weight bearing and shaft-seal assemblies on both drums around the 3-year/3000-hour design point; this is the compactor's major wear item. Rebuild the 3054C top end (turbocharger, injection pump, valve train) once oil consumption or blow-by rises. Inspect the articulated frame center pivot and oscillation bushings for play at rebuild time. Resurface or replace drum shells and scraper bars if pitted. Overhaul propel pumps and motors together, since they share one hydraulic circuit and wear rate.
Seasonal & Environment Servicing
Drain and blow out the water-spray system before freezing weather; cracked spray lines and a split tank are the most common cold-weather failure on this compactor. Add a winter-grade coolant mix and check the 3054C's cold-start aid before low-temperature paving season. In hot, dusty asphalt work, clean the radiator and turbocharger cooling fins often, since baked-on asphalt fines choke airflow faster than ordinary construction dust. Rinse asphalt residue off the drums and scraper bars daily to stop buildup that affects vibratory contact.
CB-564D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 206-5234 | Filter Element As-Air | Air intake service | Check fitment → |
| 206-5235 | Filter Element As-Air | Air intake service | Check fitment → |
| 6C-9226 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CB-564D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100-01 | Engine oil pressure sensor circuit reading below the normal operating range (low oil pressure) | Low engine oil level, a plugged oil filter, worn oil pump, or a failing oil pressure sender | Shut the engine down, check oil level and filter condition, and verify the sender wiring/connector before replacing it |
| CID 0110-00 | Engine coolant temperature above the normal operating range (overheating) | Low coolant level, a blocked radiator core, a slipping or failed fan drive, or a stuck thermostat | Idle down and let the engine cool, check coolant level and radiator airflow, then confirm the sensor reading against a manual gauge |
| CID 0111-01 | Engine coolant level sensor reading below normal (low coolant level) | An external coolant leak, air trapped in the cooling system, or a fouled or ungrounded level probe | Inspect hoses, radiator and water pump for leaks, top off coolant, and clean the level probe contacts |
| CID 0168-04 | Electrical system voltage below normal (low charging system voltage) | A weak or discharged battery, worn alternator brushes or belt, or a loose or corroded ground strap | Load-test the battery, check alternator output and belt tension, and clean and tighten all ground connections |
| CID 0102-00 | Turbocharger boost pressure sensor reading above the expected range | A restricted air intake, a sticking wastegate, or a fault in the boost sensor or its sense line | Inspect the air intake and charge piping for restrictions and check the sensor line for kinks or blockage, then confirm with Cat Electronic Technician |
| CID 0190-08 | Engine speed/timing sensor signal abnormal or outside the expected update rate | A damaged sensor tip, incorrect sensor air gap, or a chafed harness near the front gear cover | Check sensor gap and connector, inspect harness routing near the timing gear cover, and clear the code with Cat Electronic Technician after repair |
| CID 0152 | Propulsion control diagnostic lamp circuit fault (the propel warning lamp circuit itself reports a problem) | An open or shorted lamp circuit, a failed bulb or LED driver, or a chafed harness near the operator console | Check the lamp, its fuse, and the wiring back to the control module before condemning the module |
| CID 0155 | Propel enable solenoid circuit fault, commonly seen as the machine staying in neutral or refusing to propel | An open circuit, a short to battery or ground, a failed solenoid coil, or a poor connector at the propel valve | Test solenoid coil resistance and check wiring for continuity or shorts, then check the connector before replacing the solenoid |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CB-564D attachments & work tools
Drum / compaction group
CB-564D is fitted with a fixed double smooth-steel drum arrangement, drum width 2130 mm (84 in), drum diameter roughly 1295 mm (51 in). No padfoot or split-drum shell conversion is documented for this asphalt-class roller; shell-kit drum conversions belong to Cat's separate soil-compactor line, not this model.
Vibratory system (Versa-Vibe)
Versa-Vibe gives a dual-frequency choice of about 42 Hz (2,520 vpm) or 63 Hz (3,800 vpm) selected from the operator station, combined with a mechanically-set dual-amplitude choice at each drum (nominal 0.25 cm / 0.1 in), for up to four centrifugal-force combinations per drum spanning roughly 82.6-112.6 kN (18,570-25,305 lb). Each drum's vibration runs independently through a hydraulic direct, auto-reversing drive.
Water spray system
A factory water spray kit feeds bars on both drums to stop asphalt pickup, drawing from a tank of roughly 1,100 L (290 gal). Spray on/off is built into the multifunction propel lever alongside propel speed and vibration on/off.
Drum offset
An optional drum-offset function, switched from the same multifunction propel lever, lets the operator shift the drum track sideways for edge and curb-line passes without repositioning the whole machine.
Drum scraper / edge cleaning
Front and rear drum scraper assemblies are standard drum-group hardware on Cat CB-series compactors, wiping debris and asphalt buildup off the drum face in operation; they are wear/maintenance items rather than swappable work tools.
Operator protection (ROPS/FOPS)
Published operating weight is always quoted with a ROPS/FOPS structure fitted, so the roll-over/falling-object canopy is standard on this model. An enclosed cab variant is not confirmed in factory literature for this specific model - verify cab availability with a dealer for a given serial range.
Speed and steering aids
Automatic Speed Control holds a set travel speed and shows an impact-spacing indicator to help hit a target pass count. The chassis uses a vertical-yoke frame with 50/50 articulation for tight-radius maneuvering rather than a rigid frame or four-wheel-steer layout.
Coupler / mounting notes
As a tandem roller, CB-564D has no quick-coupler or bucket/fork mounting system. Its field-configurable elements are limited to the water-spray kit, optional drum-offset feature, and ROPS/FOPS structure noted above, not a swappable work-tool lineup.
All CB-564D assemblies by section
Every catalogued assembly group for the Caterpillar CB-564D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
204-7034 Air Cleaner Gp -Engine
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 20***34 | Air Cleaner Group; -Engine | 1 |
| 9X***00 | Seal-O-Ring | 1 |
189-5892 Air Cleaner Gp
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***53 | Stud | 7 |
| 17***38 | Bolt | 8 |
254-3775 Connection Gp-Inlet
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 1 |
| 11***18 | Clip | 2 |
205-7861 Lines Gp-Cooling
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 1 |
| 11***18 | Clip | 2 |
196-9587 Muffler Gp
| 00***64 | End; (Hose) | 2 |
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 10***03 | Plate-Cover | 2 |
232-6197 Turbocharger Gp
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
Basic Engine
232-7528 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 22***67 | Camshaft | 1 |
| 23***28 | Camshaft Group | 1 |
230-9149 Cover Gp-Valve Mechanism
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
| 15***32 | Seal-O-Ring | 1 |
232-7439 Crankshaft Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
359-0715 Crankshaft Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7604 Cylinder Block Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
232-7606 Cylinder Block Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
232-7524 Cylinder Head Gp
| 15***55 | Adapter | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 23***24 | Cylinder Head Group | 1 |
232-7519 Cylinder Head Gp
| 23***19 | Cylinder Head Group | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
303-6366 Drain Gp-Engine Oil
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 19***81 | Support As-Engine | 1 |
7c-4532 Drain Gp-Engine Oil
| 10***73 | Seal-O-Ring | 1 |
| 10***75 | Bearing | 1 |
| 10***76 | Clip | 1 |
231-0047 Drive Gp-Accessory
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 16***89 | Flywheel As | 1 |
186-5160 Drive Gp-Pump
| 18***60 | Drive Group-Pump | 1 |
| 21***16 | Guard As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 3 |
245-9831 Flywheel Gp
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
206-0314 Guard Gp-Belt -Alternator
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
223-7825 Housing Gp-Flywheel
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***48 | Plate-Lifting | 1 |
232-6179 Housing Gp-Front
| 19***33 | Mount-Engine | 1 |
| 23***79 | Housing Group-Front | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 3 |
232-3713 Lifting Gp-Engine
| 18***43 | Stud | 4 |
| 23***13 | Lifting Group-Engine | 1 |
| 6H***16 | Plug-Protective | 10 |
186-5165 Mounting Gp-Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 12***02 | Tube As | 1 |
232-6206 Mounting Gp-Engine
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
230-8144 Pan Gp-Oil -Engine
| 23***44 | Pan Group-Oil; -Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
232-7442 Piston & Rod Gp
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***61 | Plug; (Blanking) | 1 |
232-6204 Plug Gp-Engine
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
253-2479 Plug Gp-Engine -Cylinder Block
| 25***79 | Plug Group-Engine; -Cylinder Block | 1 |
| 7W***26 | Filter As-Engine Oil | 1 |
225-4317 Plug Gp-Engine
| 22***17 | Plug Group-Engine | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
360-7351 Pulley Gp-Crankshaft
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
| 36***51 | Pulley Group-Crankshaft | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
230-7353 Pulley Gp-Crankshaft
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 23***53 | Pulley Group-Crankshaft | 1 |
232-7526 Valve Mechanism Gp
| 23***26 | Valve Mechanism Group | 1 |
| 25***67 | Regulator Group-Temperature; (Includes Connector)(Water) | 1 |
| 25***70 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
Braking System
262-3693 Lines Gp-Brake & Shift -Power Train
| 14***63 | Elbow Group | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***74 | Elbow As | 2 |
271-3008 Lines Gp-Brake & Shift -Propel
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
282-9117 Lines Gp-Service Brake
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
189-8680 Pump & Mtg Gp-Brake -Manual Release
| 18***80 | Pump & Mtg Group-Brake; -Manual Release | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 10***05 | Plate | 2 |
| 10***06 | Plate As | 1 |
| 15***83 | Clamp-Half | 2 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 10***05 | Plate | 2 |
| 10***06 | Plate As | 1 |
| 15***83 | Clamp-Half | 2 |
Cooling System
231-0033 Connection Gp-Water
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***33 | Connection Group-Water | 1 |
354-1274 Cooler Gp-Engine Oil
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
232-3722 Cooler Gp-Engine Oil
| 08***97 | Washer; (13x50x6-mm Thk) | 4 |
| 11***26 | Mount | 4 |
| 20***75 | Mount As | 4 |
238-2799 Cooler Gp-Fltr Base & Eng Oil
| 09***79 | Setscrew-Socket | 2 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 14***16 | Connector Group | 1 |
203-0120 Mounting Gp-Rad & Oil Cooler
| 10***43 | Seal; (32-cm Each) | 0 |
| 14***25 | Connector As. | 1 |
| 15***24 | Valve Group-Fluid Sampling; (3/8-18 Nptf Thd) | 1 |
230-7355 Pump Gp-Water
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
| 14***94 | Recovery Group-Coolant | 1 |
327-0915 Radiator & Hyd Oil Cooler Gp
| 11***79 | Gasket | 3 |
| 11***62 | Plate | 3 |
| 23***88 | Gasket-Inlet | 1 |
222-4112 Radiator & Hyd Oil Cooler Gp
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 20***34 | Filter Element As-Air; (Primary) | 1 |
| 20***35 | Filter Element As-Air; (Secondary) | 1 |
196-4516 Radiator & Hyd Oil Cooler Gp
| 11***54 | Elbow; (90-Deg) | 1 |
| 13***47 | Bracket As | 1 |
| 19***16 | Radiator & Hydraulic Oil Cooler Group | 1 |
222-4115 Radiator Gp
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 19***82 | Hose | 1 |
204-2459 Recovery Gp-Coolant
| 13***99 | Clamp As | 1 |
| 15***06 | Clamp | 2 |
| 20***59 | Recovery Group-Coolant | 1 |
Electrical And Starting System
196-9583 Alternator Gp-Charging -Engine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***83 | Alternator Group-Charging; -Engine | 1 |
105-2813 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 20***88 | Battery & Wiring Group | 1 |
| 20***17 | Wiring Group-Engine | 1 |
204-6988 Battery & Wiring Gp
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
283-2492 Electrical Ar
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
| 21***82 | Lens; (Floodlight) | 1 |
| 28***92 | Electrical Ar | 1 |
232-6661 Glow Plug Gp
| 17***24 | Lamp; (12-Volt, 55-Watt, Hid)(Warning Beacon Lamp) | 1 |
| 23***61 | Glow Plug Group | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
3e-7301 Lamp Gp-Dome -With Switch
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
206-1311 Lamp Gp-Flood
| 11***18 | Clip | 1 |
| 15***84 | Clamp-Half | 16 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
9x-9484 Lamp Gp-Flood -Roading Lights
| 6V***44 | Nut - Self Locking (2nd Type) | 4 |
| 7X***32 | Washer-Hard; (11x36x6-mm Thk) | 8 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 11***18 | Clip | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
151-2457 Lamp Gp-Head
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
| 15***57 | Lamp Group-Head; -Floodlight | 1 |
185-7016 Lamp Gp-Warning Beacon -Magnetic Mount
| 11***18 | Clip | 5 |
| 13***47 | Harness As-Lighting; (Floodlights) | 4 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
289-9150 Lighting Gp-Cab
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
189-9250 Lighting Gp-Flood -Front Frame
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
226-1745 Lighting Gp-Flood -Hid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***84 | Clamp-Half | 4 |
204-4287 Lighting Gp-Flood -High Intensity
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
289-9149 Lighting Gp-Flood
| 10***24 | Starting Motor Group-Electric, .. Track-Link; B | 1 |
| 11***85 | Ring | 1 |
| 28***49 | Lighting Group-Flood | 1 |
189-9252 Lighting Gp-Roading
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 12***53 | Housing As | 1 |
205-5805 Lighting Gp-Warning Beacon -Cab
| 20***05 | Lighting Group-Warning Beacon; -Cab | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
210-0162 Lighting Gp-Warning Beacon -Platform
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 1 |
| 18***20 | Relay As-Timer; (12-Volt) | 1 |
| 21***62 | Lighting Group-Warning Beacon; -Platform | 1 |
210-0161 Lighting Gp-Warning Beacon -Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
| 15***28 | Alarm As; (Backup) | 1 |
100-6329 Starting Motor Gp-Electric
| 10***29 | Starting Motor Group-Electric | 1 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 1 |
| 23***92 | Horn | 1 |
100-8224 Starting Motor Gp-Electric
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***24 | Starting Motor Group-Electric, .. Track-Link; B | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 06***51 | Clamp | 1 |
| 09***13 | Clip | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
237-0183 Warning Gp-Backup
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 5 |
| 11***92 | Fuse; (20 Amp) | 4 |
283-4450 Wiring Gp-Console
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 5 |
205-8117 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
205-8118 Wiring Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
265-5806 Wiring Gp-Platform
| 10***79 | Nut; (M22x1.5-mm Thd) | 20 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 16***48 | Plug As | 4 |
281-9264 Wiring Gp-Platform
| 22***71 | Mount | 16 |
| 25***91 | Plate | 1 |
| 25***92 | Plate | 1 |
300-0531 Wiring Gp-Platform
| 18***67 | Lines Group-Propel; -Hydraulic | 1 |
| 18***80 | Pump & Mtg Group-Brake; -Manual Release | 1 |
| 18***28 | Pump & Mtg Group-Propel | 1 |
326-0545 Wiring Gp-Platform
| 22***83 | Plate As | 2 |
| 22***70 | Plate As | 2 |
| 26***55 | Plate | 4 |
282-9461 Wiring Gp-Rear
| 14***01 | Hose As | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 3 |
| 15***83 | Clamp-Half | 6 |
Engine Arrangement
304-5604 Engine Ar
| 30***56 | Engine Ar-Primary, . Fannel | 1 |
| 30***04 | Engine Ar | 1 |
304-5603 Engine Ar
| 29***48 | Engine Ar-Primary | 1 |
| 30***03 | Engine Ar | 1 |
297-4048 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***53 | Pulley Group-Crankshaft | 1 |
208-7716 Engine Ar-Primary
| 20***16 | Engine Ar-Primary | 1 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
302-6256 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***53 | Pulley Group-Crankshaft | 1 |
189-5896 Installation Ar-Engine
| 10***29 | Starting Motor Group-Electric | 1 |
| 18***60 | Drive Group-Pump | 1 |
| 18***65 | Mounting Group-Engine | 1 |
Frame And Body
243-6354 Bumper Gp
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 12***23 | Plunger | 2 |
| 13***31 | Boss | 2 |
323-4324 Cover Gp-Access
| 20***38 | Lines Group-Hydraulic Fan; -Hitch | 1 |
| 21***94 | Hitch Group-Articulating; -Standard | 1 |
| 32***24 | Cover Group-Access | 1 |
205-3660 Cover Gp-Access
| 20***77 | Lever | 2 |
| 20***60 | Cover Group-Access | 1 |
| 22***13 | Handle As | 1 |
195-7060 Enclosure Gp-Engine
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 19***11 | Chain | 1 |
| 19***60 | Enclosure Group-Engine | 1 |
199-6326 Frame Gp -Main
| 10***71 | Clevis | 1 |
| 11***49 | Handle As | 1 |
| 19***61 | Hood As | 1 |
205-3248 Guard Gp-Radiator
| 09***12 | Spring | 8 |
| 17***05 | Plate As | 2 |
| 17***07 | Plate As | 2 |
233-7679 Handrail Gp
| 14***52 | Union As | 1 |
| 15***52 | Union As | 3 |
| 17***15 | Strap; (Dual Clamp) | 11 |
198-6776 Hitch Ar -Standard
| 10***03 | Plate-Cover | 3 |
| 13***52 | Hose As | 1 |
| 14***90 | Hose As | 1 |
217-4167 Hitch Gp-Articulating
| 13***37 | Hose Assem. | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
217-4594 Hitch Gp-Articulating -Standard
| 14***16 | Connector Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 15***29 | Tee As | 1 |
223-2344 Hood Gp
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
| 22***44 | Hood Group | 1 |
261-0463 Scraper Gp-Drum
| 23***43 | Knob | 1 |
| 26***63 | Scraper Group-Drum | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Fuel System
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 12***72 | Bolt | 3 |
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
204-6982 Control Gp-Governor
| 12***72 | Bolt | 3 |
| 20***82 | Control Group-Governor | 1 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
205-8348 Lines Gp-Fuel
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***48 | Lines Group-Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
232-1827 Pump Gp-Fuel Injection
| 15***86 | Plate As | 1 |
| 20***68 | Plate As | 1 |
| 20***00 | Plate As | 1 |
299-9265 Pump Gp-Fuel Prm & Prim Filter
| 10***13 | Alternator Group-Charging | 1 |
| 11***42 | Strap | 1 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
233-9417 Pump Gp-Fuel Prm & Prim Filter
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
270-6992 Pump Gp-Fuel Prm & Prim Filter
| 11***57 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
198-1247 Tank & Mtg Gp-Fuel
| 10***13 | Alternator Group-Charging | 1 |
| 11***42 | Strap | 1 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
189-6321 Tank Gp-Fuel
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 2 |
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***03 | Plate-Cover | 2 |
Hydraulic System
308-3883 Actuator Gp-Pump -Vibratory, Fixed Displacement-Vibratory
| 18***40 | Lines Group-Steering; -Hydraulic Oil | 1 |
| 18***54 | Filter & Mtg Group-Hydraulic | 1 |
| 18***58 | Lines Group-Hydraulic Filter | 1 |
177-6949 Actuator Gp-Pump
| 08***72 | Plug-O-Ring | 1 |
| 09***87 | Bolt-Socket Head; (M14x2x45-mm) | 4 |
| 11***80 | Bushing; (Internal) | 1 |
196-3856 Cylinder Gp-Hydraulic -Steering
| 13***28 | Clamp; (Half) | 2 |
| 14***44 | Plate-Retainer | 1 |
| 17***15 | Strap; (Dual Clamp) | 2 |
189-6554 Filter & Mtg Gp-Hydraulic
| 13***28 | Clamp; (Half) | 2 |
| 14***44 | Plate-Retainer | 1 |
| 17***08 | Plate As | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 10***05 | Plate | 3 |
| 15***83 | Clamp-Half | 6 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
233-8509 Head Gp-Pump -Propel
| 10***05 | Plate | 3 |
| 15***83 | Clamp-Half | 6 |
| 23***09 | Head Group-Pump; -Propel | 1 |
308-3885 Head Gp-Pump -Vibratory, Fixed Displacement-Vibratory
| 17***20 | Strap-Dual Clamp | 2 |
| 20***15 | Clamp-Half | 2 |
| 30***85 | Head Group-Pump; -Vibratory, Fixed Displacement-Vibratory | 1 |
189-5894 Hydraulic Ar-Auxiliary
| 18***94 | Hydraulic Ar-Auxiliary | 1 |
| 26***92 | Kit-Seal; (Hydraulic Fan Motor) | 1 |
201-7918 Lines Gp-Auxiliary Hydraulic
| 20***18 | Lines Group-Auxiliary Hydraulic | 1 |
| 3E***33 | Key-Woodruff | 1 |
| 4I***55 | Nut; (M12 X 1.25 Thd) | 1 |
205-5638 Lines Gp-Hydraulic Fan -Hitch
| 10***17 | Seal-O-Ring | 1 |
| 10***03 | Seal-O-Ring | 1 |
| 12***98 | Seat | 3 |
189-6558 Lines Gp-Hydraulic Filter
| 10***17 | Seal-O-Ring | 1 |
| 10***03 | Seal-O-Ring | 1 |
| 12***98 | Seat | 3 |
200-5943 Lines Gp-Hydraulic Oil Cooler
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***61 | Motor Group-Piston | 1 |
| 16***35 | Seal | 1 |
323-5160 Motor Gp-Gear -Hydraulic
| 09***24 | Ring-Retaining | 1 |
| 13***01 | Cover | 1 |
| 13***07 | Shim; (0.1-mm Thk) | 2 |
255-0107 Motor Gp-Gear -Hydraulic Fan
| 12***59 | Bearing-Roller | 1 |
| 14***93 | Pin | 2 |
| 22***56 | Rotating Group-Motor | 1 |
236-7615 Motor Gp-Piston -Propel
| 11***30 | Screw; (1-5/16-Thd) | 1 |
| 12***18 | Pin | 1 |
| 12***74 | Screw-Lock | 1 |
135-3260 Motor Gp-Piston -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 10***17 | Seal-O-Ring | 1 |
| 10***03 | Seal-O-Ring | 1 |
197-6467 Motor Gp-Piston -Vibratory
| 19***67 | Motor Group-Piston; -Vibratory | 1 |
| 24***67 | Kit-Valve; (Flow Divider)(Steering Gear Pump) | 1 |
| 26***06 | Kit-Seal; (Steering Gear Pump) | 1 |
150-4398 Motor Gp-Piston -Propel
| 00***14 | Coupling-Pipe | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 14***46 | Insert-Nylon | 1 |
197-6465 Motor Gp-Piston -Vibratory
| 19***65 | Motor Group-Piston; -Vibratory | 1 |
| 24***67 | Kit-Valve; (Flow Divider)(Steering Gear Pump) | 1 |
| 26***06 | Kit-Seal; (Steering Gear Pump) | 1 |
135-3261 Motor Gp-Piston
| 03***39 | Seal-O-Ring (Id=9.25mm) | 3 |
| 10***17 | Seal-O-Ring | 3 |
| 10***03 | Seal-O-Ring | 1 |
287-3601 Motor Gp-Piston
| 11***28 | Screw | 4 |
| 11***30 | Screw; (1-5/16-Thd) | 1 |
| 12***18 | Pin | 1 |
199-6165 Mounting Gp-Tank
| 11***28 | Screw | 4 |
| 12***74 | Screw-Lock | 1 |
| 18***01 | Seal | 1 |
255-0106 Pump Gp-Gear -Steering
| 11***16 | Screw | 14 |
| 13***83 | Pin-Center | 1 |
| 13***84 | Piston | 7 |
308-2054 Pump Gp-Gear -Steering
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 12***67 | Disc-Slip | 1 |
280-3455 Pump Gp-Piston -Propel
| 09***41 | Ring-Retaining | 1 |
| 10***65 | Circlip | 1 |
| 11***45 | Shim; (1.2-mm Thk) | 1 |
300-0124 Pump Gp-Piston -Vibratory, Fixed Displacement
| 13***29 | Bearing As | 1 |
| 14***35 | Shim; (2.65-mm Thk) | 1 |
| 14***36 | Shim; (2.70mm Thk) | 1 |
285-3599 Pump Gp-Piston -Propel
| 10***65 | Circlip | 1 |
| 11***51 | Bearing | 1 |
| 19***83 | Seal-Shaft | 1 |
269-3126 Pump Gp-Piston -Propel
| 12***32 | Piston | 9 |
| 12***33 | Spring-Cup | 1 |
| 12***38 | Plate-Retainer | 1 |
226-2756 Rotating Gp-Motor
| 11***18 | Clip | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 17***15 | Strap; (Dual Clamp) | 2 |
280-7343 Rotating Gp-Motor -Implement
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***74 | Elbow As | 1 |
137-4581 Rotating Gp-Motor -Propel
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
251-1733 Rotating Gp-Pump -Vibratory, Fixed Displacement-Vibratory
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***74 | Elbow As | 1 |
276-8206 Rotating Gp-Pump -Propel
| 11***83 | Connector | 1 |
| 14***13 | Adapter Group | 1 |
| 14***28 | Connector Assem. | 1 |
151-8877 Shaft Gp-Motor
| 14***05 | Adapter Group | 1 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
| 15***29 | Tee As | 1 |
257-7435 Tank Gp-Hydraulic
285-3591 Valve & Mtg Gp-Auxiliary
189-9093 Valve & Mtg Gp-Control -Vibratory
194-3668 Valve & Mtg Gp-Control -Auxiliary
282-9116 Valve & Mtg Gp-Solenoid
279-6525 Valve & Mtg Gp-Solenoid -Auxiliary
271-3007 Valve & Mtg Gp-Solenoid -Brake
162-2453 Valve Gp-Bypass -Hydraulic Oil Cooler
249-5646 Valve Gp-Flushing -Propel Motor
290-2076 Valve Gp-Pump Control
237-9603 Valve Gp-Pump Control -Pressure-Vibratory
270-1776 Valve Gp-Pump Control -Propel
177-7122 Valve Gp-Relief
| 08***47 | Key-Woodruff | 1 |
| 16***63 | Weight Group-Eccentric | 1 |
| 17***22 | Valve Group-Relief; -Charge Pressure-Vibratory Pump | 1 |
152-1811 Valve Gp-Relief
233-9763 Valve Gp-Sequence -Propel Pump
| 18***43 | Lines Group-Vibratory | 1 |
| 18***93 | Valve & Mtg Group-Control; -Vibratory | 1 |
| 23***63 | Valve Group-Sequence; -Propel Pump | 1 |
279-6523 Valve Gp-Solenoid -Auxiliary
| 10***49 | Plate | 1 |
| 12***12 | Clamp-Half | 2 |
| 13***65 | Hose As | 1 |
187-2975 Valve Gp-Solenoid -Solenoid Valve
| 18***75 | Valve Group-Solenoid; -Solenoid Valve | 1 |
| 18***24 | Pump & Mtg Group-Vibratory | 1 |
| 19***67 | Motor & Mtg Group-Vibratory | 2 |
Lubrication System
232-7378 Filter Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
230-7578 Pump Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
205-8479 Valve Gp-Fluid Sampling
| 20***79 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
Machine Arrangement
281-9269 Chassis Ar
| 18***21 | Tank Group-Fuel | 1 |
| 19***60 | Enclosure Group-Engine | 1 |
| 19***47 | Tank & Mtg Group-Fuel | 1 |
273-2535 General Ar
| 18***94 | Hydraulic Ar-Auxiliary | 1 |
| 18***95 | Hydraulic Ar-Vibratory | 1 |
| 18***96 | Installation Ar-Engine | 1 |
Operator Station
249-7136 Air Conditioner Gp -Cab
| 24***36 | Air Conditioner Group; -Cab | 1 |
| 27***84 | Potentiometer As; (Conveyor Control, Rh) | 1 |
| 31***17 | Knob As; (Potentiometer) | 1 |
312-3371 Air Conditioner Gp
| 20***80 | Floor Mat; (Lh) | 1 |
| 20***81 | Floor Mat; (Rh) | 1 |
| 20***82 | Floor Mat; (Rear) | 1 |
255-6293 Arm Gp-Window Wiper -Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 2 |
239-3473 Arm Gp-Window Wiper -Rear
| 21***63 | Panel-Floor; (Rh)(Rh) | 1 |
| 21***64 | Panel-Floor; (Lh)(Lh) | 1 |
| 21***65 | Panel-Floor; (Rear)(Rear) | 1 |
211-0841 Cab Gp
| 10***05 | Plate | 2 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 1 |
| 10***41 | Connector-Tube | 2 |
284-7037 Cab Gp
| 10***76 | Clamp-Half | 4 |
| 17***15 | Bearing | 2 |
| 17***28 | Knob | 1 |
266-0348 Console Gp-Instrument
| 11***90 | Washer; (11.1x37.9x3.3-mm Thk) | 2 |
| 13***83 | Mirror-Convex | 2 |
| 13***09 | Bracket As-Mirror | 1 |
326-0543 Console Gp-Operator -Side
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 26***23 | Cap-Wiper | 1 |
266-0331 Console Gp-Operator -Side
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 26***31 | Console Group-Operator; -Side | 1 |
300-2724 Control Gp-Direction & Speed
| 15***41 | Mount As | 2 |
| 30***24 | Control Group-Direction & Speed | 1 |
| 3E***83 | Sleeve | 2 |
266-0274 Control Gp-Direction & Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 19***10 | Cap-Wiper | 2 |
285-3590 Control Gp-Handle -Direction, Speed
| 15***41 | Mount As | 2 |
| 28***90 | Control Group-Handle; -Direction, Speed | 1 |
| 3E***83 | Sleeve | 2 |
337-3151 Control Gp-Handle -Direction, Speed
| 15***80 | Steering Wheel Group | 1 |
| 19***01 | Lock Group-Rotation | 1 |
| 20***26 | Control Group-Steering | 1 |
266-2405 Control Gp-Speed
| 19***99 | Guard Group-Vandalism | 1 |
| 19***09 | Mounting Group-Platform | 1 |
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
202-0032 Floor Mat Gp
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
| 20***32 | Floor Mat Group | 1 |
| 21***47 | Floor Mat Group-Cab | 1 |
211-0847 Floor Mat Gp-Cab
| 15***80 | Steering Wheel Group | 1 |
| 19***01 | Lock Group-Rotation | 1 |
| 20***26 | Control Group-Steering | 1 |
205-5249 Gauge Gp-Vibratory -Vpm
| 19***99 | Guard Group-Vandalism | 1 |
| 19***08 | Mounting Group-Platform; -Operator | 1 |
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
190-4199 Guard Gp-Vandalism
| 14***64 | Seal; (142-cm) | 0 |
| 19***99 | Guard Group-Vandalism | 1 |
| 19***28 | Cover | 2 |
214-9431 Lines Gp-Cab Heater
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 15***69 | Knob Group-Steering | 1 |
| 19***92 | Indicator As; (Water Level) | 1 |
190-4201 Lock Gp-Rotation
| 15***69 | Knob Group-Steering | 1 |
| 19***01 | Lock Group-Rotation | 1 |
| 19***92 | Indicator As; (Water Level) | 1 |
267-8553 Mirror Gp-Rear View -Interior
| 16***26 | Ball Bearing | 8 |
| 18***72 | Bearing-Pivot | 1 |
| 19***57 | Bracket As | 1 |
225-3156 Mirror Gp-Rear View
| 16***26 | Ball Bearing | 8 |
| 18***72 | Bearing-Pivot | 1 |
| 19***57 | Bracket As | 1 |
223-6539 Module Gp-Warning Indicator -With Alarm
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
| 23***84 | Handrail As | 1 |
239-3475 Motor Gp-Window Wiper
| 19***50 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
239-3474 Motor Gp-Window Wiper
| 23***30 | Cover-Seat; (Back, Vinyl) | 1 |
| 23***32 | Cover-Seat; (Bottom, Vinyl) | 1 |
| 23***33 | Foam-Seat; (Bottom) | 1 |
330-5061 Motor Gp-Window Wiper
| 23***30 | Cover-Seat; (Back, Vinyl) | 1 |
| 23***32 | Cover-Seat; (Bottom, Vinyl) | 1 |
| 23***33 | Foam-Seat; (Bottom) | 1 |
330-5029 Motor Gp-Window Wiper -Rear
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
| 23***56 | Fastener Group-Seat; (Vinyl) | 1 |
| 32***08 | Seat Group-Suspension; -Vinyl | 1 |
234-2021 Mounting Gp-Cab
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
| 19***94 | Speedometer As | 1 |
| 23***21 | Mounting Group-Cab | 1 |
190-4208 Mounting Gp-Platform -Operator
| 15***77 | Reservoir | 1 |
| 19***08 | Mounting Group-Platform; -Operator | 1 |
| 25***58 | Pump As-Washer; (Windshield) | 2 |
190-4209 Mounting Gp-Platform
| 13***06 | Visor As-Window | 1 |
| 19***09 | Mounting Group-Platform | 1 |
| 23***71 | Bushing | 4 |
300-0533 Operator Ar
| 12***10 | Film-Stripe; (165-cm Each) | 0 |
| 15***97 | Film-Identification; (Water For Water Spray) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
287-8376 Operator Ar
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***04 | Film; (Variable Speed Control) | 1 |
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
273-2816 Operator Ar
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 27***16 | Operator Ar | 1 |
300-0532 Operator Ar
| 30***32 | Operator Ar | 1 |
| 30***69 | Film-Identification; (Cat, Lh)(Lh-Cat) | 1 |
| 30***70 | Film-Identification; (Cat, Rh)(Rh-Cat) | 1 |
266-0329 Operator Ar
| 21***69 | Film-Identification; (Versa Vibe)(Versa-Vibe) | 2 |
| 22***59 | Film-Instruction; (Versa Vibe, Read Omm)(Instruction) | 1 |
| 26***29 | Operator Ar | 1 |
198-4624 Platform Gp-Operator
| 15***97 | Film-Identification; (Water For Water Spray) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
| 19***24 | Platform Group-Operator | 1 |
243-3598 Platform Gp-Operator -Console
| 16***99 | Plate-Warning; (Read Operation Manual) | 1 |
| 21***31 | Film-Notice; (Engine Starting) | 1 |
| 21***04 | Film; (Variable Speed Control) | 1 |
213-9092 Platform Gp-Operator -Steering
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***92 | Platform Group-Operator; -Steering | 1 |
| 21***03 | Film; (Variable Speed Control) | 1 |
262-4575 Rops Gp
| 16***75 | Plate-Warning; (Read Operation Manual) | 1 |
| 21***32 | Film-Notice; (Engine Starting) | 1 |
| 21***04 | Film; (Variable Speed Control) | 1 |
191-5350 Seat Gp-Suspension -Vinyl
| 19***50 | Seat Group-Suspension; -Vinyl | 1 |
| 1G***77 | Tack-Fastener | 4 |
| 23***86 | Plate-Identification; (Machine)(17-Pin) | 1 |
322-7608 Seat Gp-Suspension -Vinyl
| 32***08 | Seat Group-Suspension; -Vinyl | 1 |
191-5351 Seat Gp-Suspension -Vinyl
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
205-5250 Speedometer Gp
| 20***50 | Speedometer Group | 1 |
254-0162 Tank Gp-Window Washer
| 25***62 | Tank Group-Window Washer | 1 |
243-2456 Visor Gp-Cab
| 24***56 | Visor Group-Cab | 1 |
Power Train
262-3690 Drive Gp-Drum
| 14***01 | Hose As | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 3 |
| 15***83 | Clamp-Half | 6 |
260-4733 Drum Gp-Compactor
| 14***17 | Reducer As-Orfs | 1 |
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 1 |
| 14***55 | Union As | 6 |
262-3684 Hydraulic Ar-Propel
| 11***52 | Seal-O-Ring | 1 |
| 13***60 | Motor Group-Piston; -Propel | 1 |
| 14***68 | Elbow Group | 1 |
262-3691 Installation Gp-Drum
| 11***52 | Seal-O-Ring | 1 |
| 14***68 | Elbow Group | 1 |
| 15***98 | Motor Group-Piston; -Propel | 1 |
296-5879 Kit-Repair
| 11***52 | Seal-O-Ring | 1 |
| 14***25 | Connector As. | 1 |
| 17***67 | Union As | 1 |
189-6367 Lines Gp-Propel -Hydraulic
| 09***52 | Ring | 1 |
| 09***31 | Bolt; (Socket Head) (M10x1.5x120mm) | 32 |
| 13***64 | Disc-Friction | 4 |
262-3692 Lines Gp-Propel -Power Train
| 20***50 | Speedometer Group | 1 |
| 26***33 | Drum Group-Compactor | 2 |
| 26***54 | Shaft Group-Drive | 2 |
262-3688 Motor & Mtg Gp-Propel -Front
| 11***01 | Orifice | 2 |
| 11***54 | Valve-Control; (Distribution Block) | 2 |
| 12***01 | Hub As-Coupling; (Propel Pump) | 1 |
262-3687 Motor & Mtg Gp-Propel -Rear
| 19***48 | Support Group-Drum | 2 |
| 26***87 | Motor & Mtg Group-Propel; -Rear | 1 |
| 26***90 | Drive Group-Drum | 1 |
234-1649 Planetary Gp-Final Drive
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***80 | Kit-Dust Cap; (Drive Shaft)(Drive Shaft) | 1 |
| 12***45 | Kit-Universal Joint; (Drive Shaft) | 2 |
262-3689 Power Train Ar
| 19***49 | Support; (Propel) | 1 |
| 19***50 | Support; (Vibratory) | 1 |
| 21***11 | Cover; (Rh) | 1 |
262-3682 Power Train Ar -Extra Wide
| 11***33 | Washer; (11x50x6-mm Thk) | 1 |
| 11***16 | Coupling | 1 |
| 1G***27 | Indicator-Blade | 1 |
285-3593 Pump & Mtg Gp-Propel
| 28***93 | Pump & Mtg Group-Propel | 1 |
| 32***51 | Cover As | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 6 |
189-9228 Pump & Mtg Gp-Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
260-4738 Shaft Gp-Drive
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 1 |
| 11***63 | Striker As | 1 |
| 11***06 | Stud-Ball | 4 |
260-4754 Shaft Gp-Drive
| 10***06 | Plate As | 4 |
| 19***25 | Support As | 1 |
| 20***29 | Shim; (0.8-mm Thk) | 2 |
197-7648 Support Gp-Drum
| 10***06 | Plate As | 4 |
| 19***48 | Support Group-Drum | 1 |
| 19***25 | Support As | 1 |
Service Equipment And Supplies
231-3811 Film Gp -Round Red Reflective
| 23***11 | Film Group; -Round Red Reflective | 1 |
308-0818 Film Gp
| 30***18 | Rocker Lever Assembly, Rocker Lever, Film Group | 1 |
294-0582 Film Gp
| 29***82 | Film Group; -International | 1 |
219-5970 Film Gp -Versa Vibe
| 21***70 | Film Group; -Versa Vibe | 1 |
208-3547 Plate & Film Gp -French
| 20***47 | Plate & Film Group; -French | 1 |
208-3546 Plate & Film Gp -English
| 20***46 | Plate & Film Group; -English | 1 |
208-3549 Plate & Film Gp -Portuguese
| 20***49 | Plate & Film Group; -Portuguese | 1 |
276-0429 Plate & Film Gp
| 27***29 | Plate & Film Group | 1 |
207-5369 Plate & Film Gp -Chassis
| 20***69 | Plate & Film Group; -Chassis | 1 |
208-3550 Plate & Film Gp -Spanish
| 20***50 | Plate & Film Group; -Spanish | 1 |
Steering System
202-0026 Control Gp-Steering
| 10***05 | Plate | 2 |
| 10***06 | Plate As | 1 |
| 15***83 | Clamp-Half | 2 |
323-5318 Cylinder & Mtg Gp-Steering
| 10***05 | Plate | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 14***75 | Elbow Group | 2 |
196-5086 Cylinder & Mtg Gp-Steering
| 10***05 | Plate | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 14***75 | Elbow Group | 2 |
153-7369 Knob Gp-Steering
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 1 |
| 14***25 | Connector As. | 1 |
| 14***27 | Connector Group | 1 |
189-6540 Lines Gp-Steering -Hydraulic Oil
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 1 |
| 14***25 | Connector As. | 1 |
| 14***27 | Connector Group | 1 |
202-0028 Lines Gp-Steering -Operator
| 11***73 | Seal-O-Ring | 2 |
| 14***10 | Cover | 1 |
| 14***11 | Cover | 1 |
194-3673 Pump & Mtg Gp-Steering
| 11***73 | Seal-O-Ring | 2 |
| 14***12 | Ring | 2 |
| 14***13 | Ring-Seal | 2 |
213-6314 Pump Gp-Metering -Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***07 | Adapter As | 1 |
| 14***81 | Elbow Group | 1 |
280-6841 Steering Column Gp
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 28***41 | Steering Column Group | 1 |
153-9580 Steering Wheel Gp
| 08***72 | Plug-O-Ring | 2 |
| 11***79 | Bushing; (External) | 1 |
| 11***80 | Bushing; (Internal) | 1 |
Vibratory System
282-3093 Housing Gp-Eccentric Weight -Front
| 13***11 | Cap; (Tamper Resistant) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
282-3092 Housing Gp-Eccentric Weight -Rear
| 12***28 | Spacer; (11x20x10-mm Thk) | 2 |
| 14***66 | Elbow Group | 4 |
| 14***55 | Union As | 4 |
204-2579 Housing Gp-Eccentric Weight
| 11***99 | Hose As | 2 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 2 |
| 12***27 | Hose As | 2 |
265-7809 Hydraulic Ar-Vibratory -Versa Vibe
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 21***75 | Seal-O-Ring | 1 |
| 25***29 | Kit-Seal; (Solenoid Valve) | 2 |
189-5895 Hydraulic Ar-Vibratory
| 18***95 | Hydraulic Ar-Vibratory | 1 |
| 19***31 | Shaft Group-Eccentric Weight | 1 |
| 19***41 | Shot; (Tungsten)(11-Kg) | 0 |
262-3712 Lines Gp-Vibratory
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
| 08***85 | Bushing | 1 |
262-3713 Lines Gp-Vibratory -Versa Vibe
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
| 08***14 | Seal-O-Ring | 1 |
189-6443 Lines Gp-Vibratory
| 16***80 | Kit-Service; (Counterbalance Valve) | 2 |
| 18***43 | Lines Group-Vibratory | 1 |
| 20***53 | Kit-Seal; (Valve)(Line, Boom) | 1 |
194-3667 Motor & Mtg Gp-Vibratory
| 19***67 | Motor & Mtg Group-Vibratory | 1 |
| 28***92 | Housing Group-Eccentric Weight; -Rear | 1 |
| 28***93 | Housing Group-Eccentric Weight; -Front | 1 |
195-0714 Motor & Mtg Gp-Vibratory
| 08***65 | Seal | 1 |
| 14***38 | Strainer; (Water Spray Nozzle) | 7 |
| 14***39 | Cap; (Water Spray) | 1 |
300-0123 Pump & Mtg Gp-Vibratory
| 08***65 | Seal | 1 |
| 14***38 | Strainer; (Water Spray Nozzle) | 7 |
| 14***39 | Cap; (Water Spray) | 1 |
197-4732 Shaft Gp-Eccentric Weight
| 19***32 | Shaft Group-Eccentric Weight | 1 |
| 25***80 | Filter Element-Water; (Water Spray Filter) | 1 |
| 7H***44 | Seal | 1 |
311-6358 Valve Gp-Vibratory
| 00***70 | Tee-Pipe | 1 |
| 09***40 | Clip | 2 |
| 14***99 | Insert-Nylon | 2 |
236-7614 Valve Gp-Vibratory -Hydraulic Control
| 01***24 | Bushing To Supply Port | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 19***64 | Filter Group-Water | 1 |
287-8385 Vibratory Ar
| 00***70 | Tee-Pipe | 1 |
| 09***40 | Clip | 2 |
| 14***99 | Insert-Nylon | 1 |
342-9244 Weight Gp-Eccentric
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
| 12***90 | Valve | 1 |
197-4742 Weight Gp-Eccentric
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
| 12***90 | Valve | 1 |
164-3163 Weight Gp-Eccentric
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 11***86 | Cap; (Coolant Tank) | 1 |
342-9243 Weight Gp-Eccentric
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
| 12***90 | Valve | 1 |
342-9834 Weight Gp-Eccentric
| 09***92 | Locknut; (M6x1-Thd) | 32 |
| 12***05 | Support | 8 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 8 |
342-9833 Weight Gp-Eccentric
| 09***92 | Locknut; (M6x1-Thd) | 16 |
| 10***42 | Mat-Water | 4 |
| 12***05 | Support | 8 |
282-3094 Weight Gp-Eccentric
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 11***86 | Cap; (Coolant Tank) | 1 |
Water System
190-0097 Bar Gp-Spray
| 15***61 | Nozzle; (Water Spray) | 18 |
| 19***97 | Bar Group-Spray | 1 |
201-8035 Filter Gp-Water
| 10***05 | Plate | 2 |
| 12***04 | Clamp-Half | 4 |
| 13***77 | Bolt; (M6x1x120-mm) | 4 |
194-4164 Filter Gp-Water
| 12***26 | Nozzle | 18 |
| 19***64 | Filter Group-Water | 1 |
201-4309 Lines Gp-Water Spray
| 10***05 | Plate | 2 |
| 12***04 | Clamp-Half | 4 |
| 13***77 | Bolt; (M6x1x120-mm) | 4 |
229-1576 Lines Gp-Water Spray -Cold Weather
| 14***38 | Strainer; (Water Spray Nozzle) | 4 |
| 14***99 | Insert-Nylon | 3 |
| 14***44 | Plate-Retainer | 2 |
229-1673 Lines Gp-Water Spray -Cold Weather
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 08***49 | Gasket | 1 |
275-0593 Lines Gp-Water Spray
| 19***03 | Cap; (Water Tank Fill) | 1 |
| 27***93 | Lines Group-Water Spray; -Antifreeze | 1 |
| 29***35 | Bulkhead | 1 |
275-5153 Mat & Mtg Gp-Water -Rubber
| 13***89 | Clip | 3 |
| 19***71 | Hose; (116-cm) | 0 |
| 22***51 | Nozzle As | 1 |
275-5151 Mat & Mtg Gp-Water -Cocoa
| 20***21 | Resistor As | 1 |
| 20***98 | Knob-Control; (Temperature Select) | 3 |
| 24***59 | Cable As | 2 |
276-3407 Nozzle Gp-Water -Plastic
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 4 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
281-9268 Nozzle Gp-Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 19***32 | Plate | 2 |
276-2526 Nozzle Gp-Water -Brass
| 19***71 | Hose; (116-cm) | 0 |
| 22***28 | Nozzle As | 1 |
| 27***26 | Nozzle Group-Water; -Brass | 1 |
245-7712 Pump Gp-Water Spray
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***38 | Knob-Control | 1 |
319-7093 Pump Gp-Water Spray
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
201-8036 Pump Gp-Water Spray
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***38 | Knob-Control | 1 |
189-5899 Spray Ar-Water
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***18 | Clip | 2 |
| 11***59 | Base | 1 |
209-4367 Spray Gp-Water
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***18 | Clip | 2 |
| 11***59 | Base | 1 |
200-4073 Tank Gp-Water
| 11***18 | Clip | 1 |
| 20***73 | Tank Group-Water | 1 |
| 21***43 | Film; (Direction And Speed Control) | 1 |
297-0137 Tank Gp-Water
| 03***43 | Nut; (5/16-18 Thd) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***84 | Tube-Heat Shrink; (3.2-mm Dia)(6.5-cm Each) | 0 |
CB-564D serial number reference
The PIN plate on a CB-564D is riveted to the machine frame, typically near the articulation joint or engine compartment, visible from ground level or by opening the hood. It reads as an 8-character PIN: the first 3 characters are the letter/number prefix identifying the production block, followed by a 5-digit machine sequence number. Match the 3-character prefix (C6D or D4M) to the parts or service manual cover for the correct book.
| Prefix | Identifies | Notes |
|---|---|---|
| C6D | Base production block, 3054C engine | Earliest serial block for the CB-564D vibratory paving compactor, tied to the model's introduction around 2005-2006. Machine designation reads CB-564D Vibratory Compactor, powered by the 3054C turbocharged engine. No configuration split from the later D4M block; same engine and base machine throughout. |
| D4M | Later production block, 3054C engine | Second serial block for the CB-564D, following C6D. Same 3054C engine and machine designation as the C6D block. Steering, hydraulic, and electrical component listings pair this prefix with the CB-564D. Exact model-year cutoff between the C6D and D4M blocks is not documented in public parts references; confirm with dealer using the full PIN. |
Frequently asked questions
What engine powers the Cat CB-564D?
Every CB-564D uses the Cat 3054C turbocharged diesel, a four-cylinder engine of about 4.4 liter displacement rated near 97 kW (130 hp) gross power. This engine was standard across the model's production run; no alternate engine option is documented for this model.
What is the operating weight of the CB-564D?
Operating weight with the ROPS/FOPS canopy fitted is about 12,600 kg (27,783 lb). Actual weight varies a little with canopy, counterweight, and fluid-fill options, so treat this as a baseline figure rather than an exact spec for every serial number.
What replaced the Cat CB-564D?
Caterpillar did not publish a direct one-for-one replacement for the CB-564D. Its letter-suffix CB500 D-series (CB-534D, CB-534D XW, CB-564D) gave way over time to newer Cat tandem rollers named by weight class rather than drum width (CB13, CB15, CB16), which now cover the same mid-size paving segment.
What CB-564D owners discuss
What engine powers the CB-564D, and is it a reliable unit?
The CB-564D runs Cat's 3054C turbocharged diesel, rated around 97 kW (130 hp) gross, the same block used across the D-series double-drum line (CB-534D, CB-534D XW, CB-564D). It is a mechanically injected, pre-electronic-emissions engine, which owners like for its simplicity and lack of aftertreatment to fight. The one quirk worth knowing: injection pump timing is unforgiving after any pump removal or replacement. Get the pump gear and camshaft timing marks aligned exactly, or you get a no-start or rough-running engine. Cold start behavior is normal turbo-diesel lag; let oil pressure and coolant temp come up before working the drums hard.
What wear patterns show up on the drums and undercarriage of this machine type?
Like most vibratory double-drum compactors, the eccentric weight shaft bearings are the component to watch. Cat's dual-amplitude eccentric design keeps the weight shaft bearing lube isolated from the steel shot that shifts amplitude, but the bearing still needs its grease interval respected. Skip it and the bearing runs dry, overheats, and can seize in service. Running vibration on a mat that is already dense, or too cool to compact further, transfers shock load back into the machine and accelerates both isolator wear and bearing wear. Drum scraper blades and water spray nozzles at the drum edges are normal wear/consumable items on a working machine, not signs of a defective unit, and get checked daily.
Are there known electrical or sensor problems on this platform?
The propel system depends on a calibrated position sensor on the propel lever or pedal. If that calibration is lost, commonly after a battery disconnect, ECM work, or just age, the machine can refuse to move or propel erratically even with sound hydraulics. Running the recalibration procedure in the machine's test mode fixes most of these cases. Separately, the water spray system is relay-driven off the ECM, and a corroded or loose ground at the console or joystick wiring harness is a common reason one or both spray pumps stop running. Owners report checking rocker switches and harness connectors at the console before condemning the spray pump itself.
How does the Versa-Vibe amplitude and frequency system behave, and what tends to go wrong with it?
Versa-Vibe gives two amplitudes and two frequencies from a single switch, so one machine covers thin, fast lifts and thick, slower lifts. The amplitude change happens by repositioning steel shot inside a hollow eccentric weight rather than through a separate mechanical linkage, which is part of why the system has a reputation for being simple and durable. When vibration will not engage, or will not switch between modes, the usual causes are the selector switch itself, wiring to the vibratory solenoid, or the solenoid valve at the pump and motor package. The drum and bearing are rarely the actual fault in these cases.
What hydraulic behaviors do owners mention as normal versus a real fault?
Propel is hydrostatic. A small amount of creep on a grade with the lever in neutral is normal hydrostatic pump and motor internal leakage as the components age, and by itself is not a fault. It becomes a real concern once the creep rate is fast enough to matter on slope work, at which point pump or motor wear has progressed further than normal. Steering and articulation hydraulics run on a separate circuit from propel and vibratory, so a steering-only complaint with normal propel and vibration usually isolates to the steering cylinder or valve, not the main pump. Because drift on grade and parking-brake holding force are safety-relevant, have your dealer verify propel pump and motor condition and parking brake holding force before returning a machine like this to slope work.
What is the general reputation of the CB-564D among the crews who run it?
It is seen as a straightforward, low-tech double-drum compactor: mechanical engine, hydrostatic drive, no complex emissions aftertreatment to maintain. Owners who prefer older compactors over later Tier 4 machines often cite this simplicity as a plus for uptime and field repairability. Complaints tend to center on age-related electrical connections at the console and relays rather than on the core engine or hydraulic architecture. Consistent greasing and respecting the vibratory bearing service interval account for most of the difference between a high-hour unit that is still tight and one that is not.
What should I check when buying a used CB-564D?
Confirm the serial and engine data plate. The CB-534D, CB-534D XW, and CB-564D share the same engine and control platform but differ in drum width and operating weight, so verify you are pricing the size machine you actually need. Cycle propel in both directions and run both vibration amplitudes and frequencies, listening and feeling for smooth engagement rather than hesitation. Check drum surfaces for scoring or pitting, and confirm scraper blades and water spray nozzles are intact and functioning rather than just present. Inspect the articulation joint and center pivot for play, and confirm grease is actually reaching the joint rather than leaking past it. Check the hydraulic tank and hoses for weeping seals around the propel and vibratory pump and motor package. Have your dealer verify propel calibration status and overall hydraulic pump and motor condition before you commit the machine to daily production; a compactor that only sort of moves or vibrates intermittently is usually a bigger repair than it first looks.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CB-564D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.