Caterpillarpaving compactorvibratory compactor
Caterpillar CB-535B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CB-535B is a combination vibratory compactor built for asphalt paving and finish-rolling work: a single smooth steel drum up front paired with three rubber-tired wheels at the rear, joined through an articulated, oscillating frame. It runs a Caterpillar 3054 DIT four-cylinder diesel, a turbocharged 4.0 liter (244 cu in) unit rated in the neighborhood of 75-80 kW (100-107 hp) depending on which rating basis a given source quotes. Operating weight falls in the 13.4-14 t (29,500-31,000 lb) range, varying by configuration, cab choice, and fluid fill. The drum measures 1.70 m (67 in) wide, vibrates at roughly 42 Hz, and the machine tops out near 12.7 km/h (7.9 mph) on the move. Cat built the CB-535B through the 1990s, with used units on record from the mid-1990s into the early 2000s carrying the 3AR serial prefix. It sits inside Caterpillar's combination-compactor family alongside the CB-434 and CB-534 lines, sharing much of the same driveline, vibratory hardware, and axle components. Factory configurations included an open canopy or an enclosed ROPS cab, a water-spray system feeding the front drum, and the standard 15.00R24 rear tire fitment.
The 'B' suffix marks a mid-1990s update to the original CB-535, refining hydraulics and cab/canopy options while keeping the same 3054 DIT engine and drum-plus-tire layout. Caterpillar kept developing this combination-roller concept afterward through the CB-534C and CB-534D generations, and eventually folded the whole family into its newer CW-series combination compactors, so there is no direct one-for-one CB-535C successor. Because the CB-535B shares its engine family, vibratory drum bearings, and axle hardware with siblings like the CB-434 and CB-534, parts interchange across that broader family is common in the field, which keeps these older units serviceable well past their factory production run. In today's used and parts market, the CB-535B mostly shows up with paving contractors, municipal crews, and rental fleets still running older asphalt equipment for patch work and shoulder compaction. Its mechanically simple 3054 powertrain and shared-family parts base make it a practical machine for shops doing their own repairs rather than relying on dealer-only diagnostics.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CB-535B specifications
Engine
| Engine model | Caterpillar 3054 DIT, 4-cylinder inline diesel, turbocharged direct injection |
| Gross power | 107 hp (79.8 kW) at 2200 rpm |
| Net power | approx. 100 hp (75 kW) — alternate spec listings quote this figure without rpm; treat as net rating for the same engine |
| Displacement | 4.0 L (244.1 cu in) |
| Cylinders | 4 |
| Emissions tier | Not published for this model. The 3054 DIT platform in this roller predates modern emissions-tier certification, so no tier rating is listed on spec sheets. |
Weights
| Operating weight | approx. 13,400 kg (29,547 lb) per factory spec sheet; individual used units are listed up to 13,500 kg (29,760 lb) — normal rounding/configuration variance |
| Shipping weight | Not separately published — verify with dealer for transport quoting |
| Ground pressure | Not published for this model |
Dimensions
| Overall length | 5.30 m (17 ft 5 in) |
| Overall width | 1.90 m (6 ft 3 in) |
| Height to cab top | 3.00 m (9 ft 10 in) |
| Wheelbase | 3.52 m (11 ft 6 in) |
| Drum width | 1.70 m (67 in) |
| Drum diameter | 1.30 m (51.2 in) |
| Tire size (rear wheels) | 15.00-24 |
Performance
| Maximum travel speed | 12.7 km/h (7.9 mph) |
| Vibration frequency | 42 Hz |
| Centrifugal force (high amplitude) | approx. 118 kN (26,550 lbf) |
| Gradeability | Not published for this model — verify with dealer if needed for site conditions |
Service capacities (summary)
| Fuel tank | 208 L (55 US gal) |
| Hydraulic system | 55.3 L (14.6 US gal) |
| Engine oil | Not documented for this specific chassis/installation — 3054 DIT oil capacity varies by cooling/accessory configuration |
| Cooling system | Not documented for this specific chassis/installation |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CB-535B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3054 DIT, 4-cyl turbocharged diesel | Approx. 11–13 L (11.6–13.7 US qt); no CB-535B-specific sump figure confirmed in available literature — this range reflects the 3054-series industrial engine family as fitted to comparable machines of this era. Varies by configuration; verify against the OMM or dealer. | Cat DEO (Diesel Engine Oil). Viscosity follows Cat's standard engine-oil chart: SAE 15W-40 for warm/temperate operation, SAE 10W-30 for cooler ranges, full-synthetic multigrade for sub-zero starts. Confirm exact grade against the OMM ambient-temperature chart. |
| Cooling system | Approx. 12–15 L (12.7–15.8 US qt), consistent with the 3054-series engine's typical block-and-radiator fill. CB-535B-specific figure not independently confirmed — varies by configuration. | Cat DEAC (Diesel Engine Antifreeze/Coolant) or Cat ELC (Extended Life Coolant), mixed 50/50 with water (up to 60/40 antifreeze in extreme cold) — Cat's standard coolant line for this engine generation. |
| Fuel tank | 208 L (54.9–55 US gal) | No. 2-D diesel fuel; No. 1-D in cold weather to guard against wax/gelling. Use fuel meeting Cat's diesel fuel-quality specification. |
| Transmission / powertrain (hydrostatic propel system) | No separate transmission compartment documented. The CB-535B propel system is hydrostatic, drawing from the main hydraulic reservoir rather than a discrete transmission case — confirm against the OMM. | Same fluid as the main hydraulic system (see hydraulic system row). |
| Hydraulic system (reservoir + circuit) | 55–55.2 L (14.5–14.6 US gal) | Cat HYDO Advanced 10W or Cat TDTO (Transmission/Drivetrain/Hydraulic Oil) — Cat's standard hydrostatic-drive fluid. Grade selected per ambient temperature per the OMM viscosity chart, lighter for cold starts, heavier for sustained heat. |
| Final drives (drum and wheel drive motor reduction units, each) | Not documented for this exact model in the literature reviewed. Cat OMMs for this compactor class typically list a small planetary-reduction fill per drive unit — verify against the machine's OMM or dealer. | Cat TDTO (Transmission/Drivetrain/Hydraulic Oil), matching the fluid used in the hydrostatic circuit elsewhere on this machine. |
| Axles / differentials | Not applicable. The CB-535B propels through individual hydrostatic drum and wheel drive motors rather than a differential axle. | N/A |
| Grease (chassis pivots, articulation joint, bearing points) | Spec only — no reservoir capacity; applied per the lubrication interval chart. | Cat Advanced 3Moly Grease (or Cat Multipurpose Grease, NLGI 2) for chassis, articulation, and bearing points. Use an arctic-grade grease in sub-zero climates per the OMM lubrication chart. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CB-535B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the CB-535B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the 3054 DIT crankcase, the shared hydraulic reservoir, and the rear axle/final-drive housing at every scheduled interval, not only when performance drops. The vibratory drum bearing housing deserves special attention: a milky or metal-laden sample there usually signals water intrusion from the drum spray system before the bearing itself fails. Because propel and vibratory functions draw off one hydraulic tank, contamination trends here affect both systems at once, so trend the data rather than reading single results in isolation.
Corrective & Common Repairs
Expect drum bearing seal failures first, driven by the water-spray system feeding moisture past worn seals into the bearing housing. Articulation center-pin and bushing wear shows up as steering play or drift under load and is a common mid-life repair on this frame layout. On the rear tire-drive side, check the final-drive hub motors for gear oil leaks at the axle seals. A drop in vibration frequency or a rough-sounding drum usually traces to worn exciter shaft bearings inside the vibratory housing, not the pump.
Overhaul & Rebuild Points
Major rebuild work on the CB-535B centers on the 3054 DIT engine (liners, injectors, and turbocharger once oil analysis or blow-by trends turn), the vibratory exciter housing (eccentric shaft and bearings that wear from constant impact loading), and the articulation joint (center pin and bushings carrying the full steering and oscillation load). Propel pump and motor rebuilds follow high-hour hydraulic contamination. Inspect the drum shell for cracking near the bearing hubs before committing to a bearing-only repair.
Seasonal & Environment Servicing
Before cold weather, drain the drum spray-water system completely and check antifreeze protection on the 3054 DIT cooling system; a cracked spray line or frozen water tank is a common winter failure on this machine. Switch to a lower-viscosity hydraulic oil grade if the compactor works through cold nights, since the propel and vibratory circuits share one tank. In hot, dusty asphalt-plant environments, service the engine air filter more often and keep the radiator core clear of asphalt dust to protect the 3054 DIT from overheating.
CB-535B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 108-0671 | Filter Element-Air | Air intake service | Check fitment → |
| 108-0672 | Filter Element-Air | Air intake service | Check fitment → |
| 124-5475 | Filter Element-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 1G-8446 | Screw-Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CB-535B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Coolant Temperature warning lamp (red, thermometer symbol) | Engine coolant temperature above normal operating range | Low coolant level, blocked radiator fins, slipping or broken fan belt, faulty thermostat | Idle down, do not shut off a hot engine abruptly; check coolant level and radiator once safe to open, inspect belt and fan drive |
| Engine Oil Pressure warning lamp (red, oil can symbol) | Engine oil pressure below the switch threshold | Low oil level, plugged oil filter, worn oil pump, failed pressure switch | Stop the engine immediately, check oil level and filter condition before restarting |
| Alternator / Battery charge warning lamp | Charging system not producing normal output | Broken or slipping alternator belt, faulty alternator, loose or corroded battery/wiring connections | Check belt tension and battery terminals; test alternator output if lamp stays on with engine running |
| Air Filter Restriction indicator (vacuum gauge or pop-up button, yellow band) | Intake air filter restriction has reached the service limit | Clogged primary air filter element, dusty jobsite conditions | Inspect and clean or replace the air filter element, reset the restriction indicator |
| Hydraulic Oil Temperature warning (gauge or lamp) | Hydraulic system oil running above normal temperature | Low hydraulic fluid level, clogged hydraulic oil cooler, cooling fan fault, prolonged high-load operation in hot weather | Check hydraulic fluid level and cooler fins, confirm cooling fan operation, let system cool before continuing |
| Water-in-Fuel / Fuel Filter warning indicator | Water or excessive contamination detected in the fuel/water separator | Water accumulation in the fuel-water separator bowl, contaminated fuel supply | Drain the water separator bowl and check fuel filter condition |
| Low Fuel Level lamp | Fuel tank level has reached the low-fuel threshold | Tank nearing empty, faulty fuel level sender | Refuel; if lamp stays on after refueling, check the fuel level sender/float |
| Engine Preheat / Glow indicator | Cold-start intake air preheat cycle active or required | Cold ambient temperature at start-up | Allow the preheat cycle to complete before cranking the starter |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CB-535B attachments & work tools
Front steel drum module
Single smooth steel drum mounted at the front of the machine, about 1.70 m (67 in) wide and 1.3 m (51.2 in) diameter. Drum is fixed to the frame and is not a swappable work tool; it is the machine's primary asphalt-compaction element.
Rear pneumatic tire compaction module
Rear axle carries a bank of pneumatic tires sized 15.00R24 that knead and seal the asphalt mat behind the drum pass. This drum-plus-tire layout places the CB-535B in Cat's combination-compactor class rather than a straight tandem steel-drum roller, so tire tread wear and inflation are the main service items rather than interchangeable tools.
Vibratory drive and amplitude control
Drum vibrates at roughly 42 Hz with a rated high-amplitude centrifugal force in the order of 118 kN (about 26,500 lbf); operator selects vibration on/off and amplitude from the console. The vibratory exciter is a factory-integrated hydrostatic circuit built into the drum, not a bolt-on hydraulic attachment, so no separate hydraulic kit is fitted or required to run it.
Water spray / anti-stick wetting system
Pump-fed spray bars wet both the drum face and the tire faces to keep hot asphalt from picking up on the compaction surfaces; tank-mounted screen filters protect the nozzles from clogging. Nozzle counts differ between the drum bar and the tire-mounted spray points and vary by configuration/production run, so treat exact nozzle counts as indicative only.
Operator protection structure
An open ROPS-type canopy is the documented protective structure for this compactor class. A fully enclosed cab option is advertised on related/later Cat compaction rollers but is not separately confirmed in available documentation for this exact 535B configuration - verify cab availability with a dealer for a given serial range.
Work-tool mounting interface
The CB-535B is a dedicated self-propelled roller with no universal quick-coupler, 3-point hitch, or skid-steer-style mounting plate. Ancillary items such as scraper bars, edge guides, or lighting/beacon kits are factory-fitted or dealer-retrofitted rather than field-interchangeable attachments.
Articulated steering joint
The drum module and tire module are joined through a center-pivot articulated frame so the machine can steer while keeping both the drum and the tire bank in ground contact. This is a structural design trait of the combination-roller class this model belongs to, not an optional add-on.
Padfoot / shell-kit conversion
Bolt-on padfoot shell kits that convert a smooth drum to a padfoot drum are documented for Cat single-drum soil compactors (CS/CP families), not for this combination asphalt roller. No source ties a padfoot shell-kit option to the CB-535B specifically, so it should not be assumed available for this model.
All CB-535B assemblies by section
Every catalogued assembly group for the Caterpillar CB-535B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
126-3397 Air Cleaner Gp
| 07***82 | Hood | 1 |
| 10***54 | Air Cleaner Group | 1 |
| 10***24 | Hose | 1 |
178-0412 Air Cleaner Gp
| 07***82 | Hood | 1 |
| 10***54 | Air Cleaner Group | 1 |
| 10***24 | Band As-Air Cleaner | 2 |
105-4954 Air Cleaner Gp
| 10***54 | Air Cleaner Group | 1 |
| 10***71 | Filter Element-Air; (Primary) | 1 |
| 10***72 | Filter Element-Air; (Secondary) | 1 |
6i-4203 Cartridge Gp-Turbocharger
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 6I***04 | Housing As | 1 |
| 6I***05 | Wheel | 1 |
142-5073 Flange Gp-Exhaust
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***73 | Flange Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
146-4047 Guard Gp-Exhaust
| 13***02 | Plate As | 2 |
| 13***04 | Guard | 1 |
| 14***47 | Guard Group-Exhaust | 1 |
100-3163 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***64 | Manifold-Exhaust | 1 |
6i-4680 Manifold Gp-Inlet
| 06***58 | Clamp-Hose | 1 |
| 13***01 | Hose-Inlet | 1 |
| 13***05 | Manifold-Inlet | 1 |
126-3396 Muffler Gp
| 10***29 | Muffler | 1 |
| 11***52 | Pipe As | 1 |
| 11***14 | Guard | 1 |
178-0411 Muffler Gp
| 10***75 | Plate | 1 |
| 10***84 | Pipe As | 1 |
| 10***61 | Tube-Flexible | 1 |
138-2077 Turbocharger Gp
| 13***77 | Turbocharger Group | 1 |
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
6i-4195 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***66 | Gasket | 1 |
| 10***17 | Elbow-Exhaust | 1 |
118-8384 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 7C***29 | Housing As | 1 |
219-9766 Turbocharger Gp
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
| 16***92 | Cartridge Group-Turbocharger | 1 |
150-1213 Turbocharger Gp
| 10***54 | Nut | 3 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 6 |
Basic Engine
139-4669 Camshaft Gp
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
| 13***11 | Washer | 1 |
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 13***30 | Camshaft | 1 |
133-9820 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
6i-0643 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
105-4157 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 10***57 | Cover Group-Valve Mechanism | 1 |
156-0972 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 11***04 | Seal-O-Ring | 1 |
| 11***05 | Seal-O-Ring | 1 |
131-4698 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 11***04 | Seal-O-Ring | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
139-4664 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
254-0091 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
106-8759 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-4238 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
139-4663 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 11***40 | Housing As | 1 |
| 11***41 | Gasket | 1 |
209-6725 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
132-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-5557 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
132-9254 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
101-4072 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
164-6098 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
6i-1195 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
139-4666 Cylinder Head Gp
| 13***66 | Cylinder Head Group | 1 |
| 16***61 | Gasket-Cylinder Head | 1 |
| 16***20 | Pin | 2 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
138-7738 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 13***80 | Pulley-Fan Drive | 1 |
| 13***39 | Housing As | 1 |
114-4366 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 11***66 | Drive Group-Fan | 1 |
1g-9852 Drive Gp-Pump
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***70 | Adapter | 1 |
100-6321 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***21 | Flywheel Group | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
130-6352 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
101-3613 Housing Gp-Flywheel
| 06***23 | Dowel | 2 |
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
139-4668 Housing Gp-Front
| 10***77 | Stud | 2 |
| 13***68 | Housing Group-Front | 1 |
| 14***44 | Shield | 1 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
142-0348 Lifting Gp-Engine
| 14***53 | Plate | 1 |
| 14***48 | Lifting Group-Engine | 1 |
| 14***49 | Plate-Lifting | 1 |
6i-0652 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 6I***93 | Bolt; (M10x1.5x30-mm) | 2 |
| 6I***52 | Lifting Group-Engine | 1 |
114-4334 Mounting Gp-Alternator
| 10***04 | Bracket | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 10***17 | Washer | 1 |
131-5115 Mounting Gp-Alternator
| 10***04 | Bracket | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 10***17 | Washer | 1 |
110-5180 Mounting Gp-Engine Flexible
| 11***80 | Mounting Group-Engine Flexible | 1 |
| 12***57 | Mount As | 1 |
| 1G***29 | Mount As | 2 |
138-8106 Mounting Gp-Fan Drive
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 13***68 | Stud | 4 |
| 13***69 | Extension-Fan | 1 |
139-0668 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
106-8851 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 10***51 | Pan Group-Oil | 1 |
108-9620 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 10***20 | Piston & Rod Group | 1 |
| 11***20 | Kit-Piston Ring | 4 |
139-4665 Piston & Rod Gp
| 13***73 | Kit-Piston Ring | 4 |
| 13***65 | Piston & Rod Group | 1 |
| 15***90 | Piston As | 4 |
130-4648 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
| 24***28 | Washer; (16.5x20.5x1.6-mm Thk) | 1 |
141-0728 Plug Gp-Engine
| 14***28 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
139-4667 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
Braking System
126-3434 Lines Gp-Service Brake
| 08***80 | Hose | 2 |
| 08***86 | Clamp | 2 |
| 11***41 | Hose As | 1 |
189-2066 Lines Gp-Service Brake
| 08***86 | Clamp | 2 |
| 10***02 | Hose As | 2 |
| 11***41 | Hose As | 1 |
178-0418 Lines Gp-Service Brake
| 08***86 | Clamp | 2 |
| 10***02 | Hose As | 2 |
| 11***41 | Hose As | 1 |
115-8488 Pump Gp-Hand
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
| 11***20 | Pump | 1 |
| 11***21 | Valve-Check | 2 |
126-3442 Pump Gp-Hand
| 11***88 | Pump Group-Brake; -Parking Brake Release | 1 |
| 12***42 | Pump Group-Hand | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
1g-2971 Valve Gp-Solenoid
| 08***79 | Head-Control | 1 |
| 1G***71 | Valve Group | 1 |
| 1G***52 | Nut | 1 |
126-3436 Valve Gp-Brake & Shift
| 08***80 | Screw | 8 |
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 2 |
| 11***75 | Valve-Needle | 1 |
178-3732 Valve Gp-Solenoid
| 10***84 | Kit-Seal | 1 |
| 10***86 | Solenoid | 2 |
| 17***32 | Valve Group-Solenoid | 1 |
1g-2973 Valve Gp-Solenoid
| 08***79 | Head-Control | 2 |
| 1G***73 | Valve Group-Solenoid | 1 |
| 1G***52 | Nut | 2 |
157-0425 Valve Gp-Solenoid
| 14***83 | Nut | 1 |
| 14***84 | Solenoid | 1 |
| 14***85 | Kit-Seal | 1 |
Cooling System
146-0001 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 14***01 | Connection Group-Water | 1 |
114-4361 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***50 | Clamp-Hose | 6 |
| 10***19 | Clip | 1 |
186-5381 Cooler Gp-Fltr Base & Eng Oil
| 06***66 | Washer | 2 |
| 10***73 | Bolt; (M10x1.5x60-mm) | 2 |
| 11***44 | Head As-Oil Filter; (Engine) | 1 |
142-0524 Fan Gp-Blower
| 10***14 | Fan-Blower | 1 |
| 14***24 | Fan Group-Blower | 1 |
| 14***94 | Guard As-Fan | 2 |
112-7904 Fan Gp-Blower
| 11***04 | Fan Group-Blower | 1 |
| 11***43 | Fan-Blower | 1 |
| 12***35 | Guard As-Fan | 1 |
6i-4040 Lines Gp-Water
| 10***89 | Clamp-Hose | 2 |
| 13***54 | Connector As | 1 |
| 13***56 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
139-0642 Plug Gp-Water Lines
| 10***87 | Plug | 16 |
| 13***70 | Plug | 4 |
| 13***42 | Plug Group-Water Lines | 1 |
179-6896 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
149-0539 Pump Gp-Water
| 14***39 | Pump Group-Water | 1 |
| 15***38 | Seal | 1 |
| 20***29 | Seal-O-Ring | 1 |
139-2614 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
6i-0441 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 6I***93 | Bolt; (M8x1.25x80-mm) | 1 |
| 6I***41 | Pump Group-Water | 1 |
133-9550 Pump Gp-Water
| 06***58 | Clamp-Hose | 2 |
| 10***11 | Gasket | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
6i-0442 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 6I***00 | Seal | 1 |
| 6I***42 | Pump Group-Water | 1 |
112-7899 Radiator & Hyd Oil Cooler Gp
| 08***92 | Valve As-Check | 1 |
| 10***56 | Cooler-Oil | 1 |
| 10***46 | Radiator Group | 1 |
140-1989 Radiator & Hyd Oil Cooler Gp
| 08***92 | Valve As-Check | 1 |
| 11***48 | Hose; (Lower) | 1 |
| 11***94 | Mount As | 1 |
Electrical And Starting System
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
145-2349 Alternator Gp-Charging
| 11***39 | Spacer; (10.5x18x21-mm Thk) | 1 |
| 14***11 | Strap | 1 |
| 14***12 | Bracket As | 1 |
102-2140 Alternator Gp-Charging
| 10***40 | Alternator Group-Charging | 1 |
| 10***87 | Bracket | 1 |
| 3P***11 | Spacer (11.13mm Thk); (11.13-mm Thk) | 1 |
1g-9878 Battery & Wiring Gp
| 03***97 | Boot | 1 |
| 10***39 | Cable As | 1 |
| 10***00 | Terminal As-Battery; (Remote Jump Start, Positive) | 1 |
178-0413 Electrical Ar
| 12***31 | Wiring Group-Offset | 1 |
| 17***13 | Electrical Ar | 1 |
| 17***14 | Wiring Group-Machine | 1 |
116-4518 Electrical Ar
| 11***18 | Electrical Ar | 1 |
| 12***29 | Wiring Group-Machine | 1 |
| 12***30 | Wiring Group-Engine | 1 |
106-9946 Lamp Gp-Head
| 08***05 | Connector | 1 |
| 08***26 | Connector | 1 |
| 08***35 | Protector | 1 |
081-3688 Lamp Gp-Flood -Front
| 08***14 | Bulb; (24-Volt, 70-Watt)(Flood. Front) | 1 |
| 08***88 | Lamp Group; -Front | 1 |
| 08***31 | Protector | 1 |
9x-4381 Lamp Gp-Flood -Suspended
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
162-3294 Lamp Gp-Flood -Vertical Mount
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
108-1621 Lamp Gp-Flood
| 08***88 | Lamp Group; -Front | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***21 | Lamp Group-Flood | 1 |
9x-1439 Lamp Gp-Flood -Vertical
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***39 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 9X***55 | Body As-Lamp | 1 |
111-9714 Lamp Gp-Head
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***14 | Lamp Group-Head | 1 |
| 22***45 | Lamp Group-Roading | 4 |
229-3445 Lamp Gp-Roading
| 08***05 | Connector | 1 |
| 08***26 | Connector | 1 |
| 08***35 | Protector | 1 |
111-9711 Lamp Gp-Signal
| 08***42 | Lamp Group; (Signal-Front) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***11 | Lamp Group-Signal | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
114-0860 Lamp Gp-Warning Beacon
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 11***60 | Lamp Group-Warning Beacon | 1 |
| 12***39 | Wire As | 1 |
178-4320 Lighting Gp-Flood
| 08***55 | Nut | 4 |
| 08***94 | Work Light Support | 2 |
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 4 |
126-3424 Lighting Gp-Flood
| 08***55 | Nut | 4 |
| 08***94 | Work Light Support | 2 |
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 4 |
178-4321 Lighting Gp-Roading
| 08***55 | Nut | 8 |
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 2 |
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 4 |
126-3425 Lighting Gp-Roading
| 08***55 | Nut | 8 |
| 08***79 | Lamp; (24-Volt, 15-Watt)(Rear, Rh) | 2 |
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 4 |
081-4135 Regulator Gp-Voltage
| 08***02 | Washer | 1 |
| 08***01 | Screw | 1 |
| 08***44 | Rotary Eccentric Relay | 1 |
193-2550 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 19***50 | Sensor Group-Speed; -Tmsn, Torque Converter Output | 1 |
120-4187 Solenoid Gp-Throttle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***17 | Solenoid | 1 |
| 12***87 | Solenoid Group-Throttle; -Governor | 1 |
130-4650 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 13***50 | Starting Aid Group; -Heater | 1 |
106-7344 Starting Aid Gp
| 10***44 | Starting Aid Group | 1 |
| 10***39 | Holder-Fuse | 1 |
| 1H***93 | Lockwasher (External Tooth) | 2 |
152-7787 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***54 | Clip | 1 |
108-9621 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
152-7565 Starting Motor Gp-Electric
| 11***85 | Ring | 1 |
| 14***41 | Starting Motor Group-Electric | 1 |
| 15***65 | Starting Motor Group-Electric | 1 |
1g-9963 Starting Motor Gp-Electric
| 14***41 | Starting Motor Group-Electric | 1 |
| 1G***63 | Starting Motor Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
143-0541 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
100-6929 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
3k-1650 Switch Gp-Rotary
| 3K***50 | Switch As-Light; -Floodlights | 1 |
| 5L***00 | Screw (Part Of 2s***42 Assem.) | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
3e-0075 Switch Gp-Magnetic
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
175-2322 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2324 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
137-2666 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 13***66 | Switch Group-Pressure; -Engine Oil | 1 |
| 25***10 | Switch As-Pressure; (Engine Oil) | 1 |
9g-7641 Switch Gp-Start
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
108-3190 Switch Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***90 | Switch Group-Temperature; -Engine Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
190-4989 Switch Gp-Toggle
| 08***55 | Nut | 4 |
| 08***71 | Screw | 2 |
| 16***87 | Strip-Terminal | 1 |
126-3409 Switch Gp-Vibratory
| 08***09 | Nut; (Front & Rear) | 2 |
| 08***80 | Terminal Plate | 1 |
| 08***36 | Screw-Bolt | 2 |
232-3674 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
126-3463 Warning Gp-Backup
| 12***63 | Warning Group-Backup | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
131-5236 Wiring Gp-Console
| 05***02 | Plug | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
126-3430 Wiring Gp-Engine
| 05***33 | Gasket-Tank Unit | 1 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
178-1045 Wiring Gp-Engine
| 03***18 | Screw-Machine | 2 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 3 |
| 09***43 | Packing | 1 |
116-2360 Wiring Gp-Engine
| 11***01 | Harness As | 1 |
| 11***60 | Wiring Group-Engine | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 1 |
189-9050 Wiring Gp-Hyd Control Valve
| 18***49 | Harness As | 1 |
| 18***50 | Wiring Group-Hydraulic Control Valve | 1 |
| 2N***71 | Lamp As-Indicator; (Red) | 1 |
178-0414 Wiring Gp-Machine
| 08***91 | Clamp | 23 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
126-3429 Wiring Gp-Machine
| 08***91 | Clamp | 23 |
| 12***29 | Wiring Group-Machine | 1 |
| 12***98 | Harness As-Chassis | 1 |
126-3431 Wiring Gp-Offset
| 12***31 | Wiring Group-Offset | 1 |
| 12***31 | Harness As | 1 |
| 12***32 | Harness As | 1 |
Engine Arrangement
100-8184 Engine Ar
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***21 | Flywheel Group | 1 |
| 10***84 | Engine Ar | 1 |
130-4800 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
116-4525 Installation Ar-Engine
| 10***40 | Alternator Group-Charging | 1 |
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 11***80 | Mounting Group-Engine Flexible | 1 |
178-0410 Installation Ar-Engine
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 11***80 | Mounting Group-Engine Flexible | 1 |
| 12***98 | Lines Group-Fuel | 1 |
Frame And Body
126-3400 Bumper Gp-Drum
| 08***93 | Nut | 8 |
| 08***63 | Plate | 2 |
| 10***22 | Grill | 1 |
110-3793 Door Gp-Access
| 08***82 | Retainer | 2 |
| 10***16 | Plate | 4 |
| 10***44 | Lanyard | 1 |
131-2289 Door Gp-Access
| 08***82 | Retainer | 2 |
| 11***35 | Latch As | 1 |
| 11***51 | Insulation | 1 |
114-8939 Door Gp-Access
| 08***82 | Retainer | 2 |
| 08***08 | Handle | 1 |
| 11***35 | Latch As | 1 |
114-8938 Enclosure Gp-Engine
| 08***83 | Catch | 4 |
| 11***36 | Support | 4 |
| 11***38 | Enclosure Group-Engine | 1 |
126-3406 Enclosure Gp-Rear
| 08***24 | Handle | 2 |
| 08***98 | Latch; (Door) | 2 |
| 08***98 | Ring | 2 |
126-3399 Frame Gp-Main
| 08***19 | Ballast | 0 |
| 10***50 | Shaft | 1 |
| 10***90 | Plate As; (Lh) | 1 |
178-1066 Frame Gp-Main
| 08***19 | Ballast | 0 |
| 10***50 | Shaft | 1 |
| 10***86 | Sheet | 6 |
112-3874 Guard Gp-Crankcase
| 11***54 | Insulation | 1 |
| 11***73 | Guard As | 1 |
| 11***74 | Guard Group-Crankcase | 1 |
107-5735 Guard Gp-Platform
| 08***17 | Screw-Hex Socket; (M8x1.25-Thd) | 2 |
| 10***35 | Guard Group-Platform | 1 |
| 11***02 | Spacer; (52mm Thk) | 2 |
151-5209 Guard Gp-Platform
| 08***17 | Screw-Hex Socket; (M8x1.25-Thd) | 2 |
| 11***02 | Spacer; (52mm Thk) | 2 |
| 11***89 | Mount-Flexible | 4 |
138-0638 Hitch Gp-Articulating & Osc
| 09***07 | Bolt; (M16x2x120-mm) | 1 |
| 10***41 | Spacer; (0.8-mm Thk) | 4 |
| 10***46 | Spacer; (0.25-mm Thk) | 4 |
110-0938 Hitch Gp-Articulating & Osc
| 03***69 | Bearing | 3 |
| 08***23 | Handle | 2 |
| 09***07 | Bolt; (M16x2x120-mm) | 1 |
126-3402 Scraper Gp-Smooth Drum
| 10***46 | Plate | 2 |
| 10***47 | Plate | 2 |
| 10***48 | Scraper | 2 |
153-4855 Scraper Gp-Smooth Drum
| 10***47 | Plate | 2 |
| 12***44 | Plate | 2 |
| 14***62 | Bar | 4 |
127-5699 Scraper Gp-Tire
| 08***30 | Mount; (Cb521,Cb523,Cb525) | 6 |
| 08***66 | Scraper; (Cb521,Cb523,Cb525) | 3 |
| 08***24 | Plate; (Cb521,Cb523,Cb525) | 3 |
126-3455 Skirt Ar-Tire
| 12***55 | Skirt Ar-Tire | 1 |
| 12***60 | Skirt Group-Tire | 1 |
126-3460 Skirt Gp-Tire
| 08***98 | Ring | 15 |
| 08***54 | Link | 3 |
| 12***53 | Hook | 1 |
126-3401 Step Gp
| 12***01 | Step Group | 1 |
| 12***12 | Step As | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
122-9441 Support Gp-Platform
| 11***01 | Stop-Rubber | 2 |
| 12***68 | Bolt-Socket Head | 10 |
| 12***16 | Pin | 2 |
Fuel System
106-7345 Control Gp-Fuel
| 10***45 | Control Group-Fuel | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 2 |
| 11***51 | Bracket | 2 |
106-8365 Control Gp-Governor
| 03***77 | Ball Joint | 1 |
| 10***65 | Control Group-Governor | 1 |
| 11***29 | Bracket | 1 |
101-3376 Filter Gp-Fuel
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***76 | Filter Group-Fuel | 1 |
| 13***96 | Filter Group-Fuel | 1 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
148-5456 Filter Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 4 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
126-3398 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 08***86 | Clamp | 4 |
| 10***71 | Tube As | 1 |
188-9666 Lines Gp-Fuel
| 03***49 | Plug | 2 |
| 08***86 | Clamp | 2 |
| 08***91 | Adapter | 2 |
101-3900 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
| 03***93 | Ferrule | 2 |
114-4336 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
167-1179 Pump Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
114-4340 Pump Gp-Fuel Injection
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 11***64 | Housing | 1 |
| 11***70 | Bolt | 2 |
114-4341 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
6i-0570 Pump Gp-Fuel Transfer
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 12***20 | Pump Group-Fuel Transfer | 1 |
138-3097 Separator Gp-Water
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
Hydraulic System
126-3448 Block Gp-Hydraulic
| 08***15 | Connection | 6 |
| 08***48 | Gasket | 9 |
| 08***61 | Washer-Seal | 6 |
178-4307 Block Gp-Hydraulic
| 08***48 | Gasket | 9 |
| 08***61 | Washer-Seal | 6 |
| 12***51 | Adapter | 6 |
087-1788 Cap & Strainer Gp-Hyd Oil Fill
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2J***61 | Ring-Retaining | 1 |
177-9602 Control Gp-Hydraulic
| 11***22 | Plate As | 1 |
| 11***64 | Spacer | 1 |
| 11***64 | Anchor | 3 |
110-3263 Cylinder & Mtg Gp-Offset
| 03***69 | Bearing | 1 |
| 07***40 | Spacer; (1-mm Thk) | 1 |
| 07***08 | Bushing-Terminal; (16 Ga.) | 1 |
126-3457 Cylinder & Mtg Gp-Lift
| 08***48 | Gasket | 1 |
| 08***69 | Seal | 2 |
| 08***30 | Washer | 4 |
127-4823 Cylinder Gp-Hydraulic
| 12***23 | Cylinder Group-Hydraulic | 1 |
| 12***80 | Kit-Seal | 1 |
| 12***81 | Ball Joint | 2 |
110-2618 Cylinder Gp-Hydraulic
| 11***18 | Cylinder Group-Hydraulic | 1 |
| 23***87 | Kit-Seal | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
112-6220 Cylinder Gp-Hydraulic
| 03***69 | Bearing | 1 |
| 07***02 | Wire, Lock | 1 |
| 08***23 | Seal | 1 |
126-3451 Filter & Mtg Gp-Hydraulic
| 12***51 | Filter & Mtg Group-Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
178-1046 Filter & Mtg Gp-Hydraulic
| 11***18 | Tee-Swivel | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 17***46 | Filter & Mtg Group-Hydraulic | 1 |
122-1786 Filter Gp-Oil
| 12***86 | Filter Group-Hydraulic; -Hydraulic | 1 |
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
133-5343 Filter Gp-Oil
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 13***43 | Filter Group-Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
077-5200 Gauge Gp-Sight
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 2 |
| 8F***69 | Packing,Preformed Uoc:Bsv,Bsx | 4 |
178-0420 Hydraulic Ar-Auxiliary
| 11***63 | Cylinder & Mounting Group | 1 |
| 11***96 | Pump & Mtg Group-Hydraulic | 1 |
| 12***84 | Cylinder & Mtg Group-Steering | 1 |
116-4523 Hydraulic Ar-Auxiliary
| 11***63 | Cylinder & Mounting Group | 1 |
| 11***96 | Pump & Mtg Group-Hydraulic | 1 |
| 11***23 | Hydraulic Ar-Auxiliary | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
126-3405 Lines Gp-Drain
| 11***56 | Hose As | 1 |
| 12***92 | Hose As | 1 |
| 12***05 | Lines Group-Drain | 1 |
189-2064 Lines Gp-Hydraulic
| 08***86 | Clamp | 1 |
| 10***22 | Hose As | 1 |
| 10***26 | Hose As | 1 |
126-3433 Lines Gp-Hydraulic
| 08***80 | Connector | 2 |
| 08***80 | Hose | 2 |
| 08***86 | Clamp | 1 |
126-3452 Lines Gp-Hydraulic Filter
| 11***62 | Hose As | 2 |
| 11***35 | Hose As | 1 |
| 12***52 | Lines Group-Hydraulic Filter | 1 |
188-3230 Lines Gp-Hydraulic Filter
| 10***28 | Hose As | 2 |
| 10***68 | Hose As | 1 |
| 18***30 | Lines Group-Hydraulic Filter | 1 |
178-1060 Lines Gp-Hydraulic Filter
| 10***28 | Hose As | 2 |
| 11***35 | Hose As | 1 |
| 17***60 | Lines Group-Hydraulic Filter | 1 |
126-3450 Lines Gp-Hydraulic Oil Cooler
| 08***91 | Clamp | 2 |
| 10***20 | Hose As | 1 |
| 11***38 | Hose As | 1 |
126-3453 Lines Gp-Lifting
| 08***91 | Clamp | 3 |
| 11***88 | Hose As | 1 |
| 11***05 | Hose As | 1 |
190-4990 Lines Gp-Lifting
| 08***91 | Clamp | 5 |
| 11***88 | Hose As | 1 |
| 11***05 | Hose As | 1 |
126-3461 Lines Gp-Offset
| 12***31 | Hose As | 1 |
| 12***36 | Hose As | 1 |
| 12***61 | Lines Group-Offset | 1 |
126-3411 Lines Gp-Pilot
| 08***86 | Clamp | 2 |
| 10***88 | Bar | 1 |
| 10***13 | Clamp | 1 |
178-1194 Lines Gp-Pilot
| 08***86 | Clamp | 2 |
| 10***88 | Bar | 1 |
| 10***13 | Clamp | 1 |
083-2077 Motor Gp-Hydraulic
| 08***10 | Bolt | 12 |
| 08***70 | Lock Washer | 12 |
| 08***31 | Bearing | 1 |
158-1122 Motor Gp-Piston
| 08***76 | Seal | 1 |
| 08***24 | Seals Kit; Including The Items: 27-43-45-72-78-79-82-106 | 1 |
| 08***11 | Washer | 1 |
158-1120 Motor Gp-Piston
| 08***76 | Seal | 1 |
| 08***24 | Seals Kit; Including The Items: 27-43-45-72-78-79-82-106 | 1 |
| 08***11 | Washer | 1 |
082-7759 Motor Gp-Piston
| 08***59 | Motor Group-Piston | 1 |
| 12***01 | Seal-O-Ring | 1 |
| 12***10 | Rotary Group | 1 |
120-3960 Motor Gp-Piston
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
125-9115 Plate Gp-Motor
| 12***15 | Plate Group-Motor | 1 |
| 12***16 | Plate-Port | 1 |
| 12***17 | Bearing | 1 |
187-6164 Pump & Mtg Gp-Hydraulic
| 08***33 | Seal-O-Ring | 2 |
| 08***99 | Kit-Seal; (Secondary Pump) | 2 |
| 08***71 | Flange-Half | 2 |
115-9796 Pump & Mtg Gp-Hydraulic
| 08***33 | Seal-O-Ring | 2 |
| 08***71 | Flange-Half | 2 |
| 09***22 | Plug | 1 |
115-1897 Pump Gp-Gear
| 08***99 | Kit-Seal; (Secondary Pump) | 1 |
| 08***81 | Kit-Seal; (Primary Pump) | 1 |
| 11***97 | Pump Group-Gear | 1 |
134-2519 Pump Gp-Gear
| 08***99 | Kit-Seal; (Secondary Pump) | 2 |
| 13***19 | Pump Group-Gear | 1 |
| 13***63 | Seal | 1 |
1g-9900 Pump Gp-Piston
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 09***47 | Pin, Dowel | 2 |
| 10***03 | Nut-Seal | 1 |
122-1105 Pump Gp-Piston
| 10***96 | Spring-Piston | 2 |
| 10***97 | Valve-Relief | 2 |
| 10***98 | Ring-Backup | 2 |
122-0014 Pump Gp-Piston
| 09***47 | Pin, Dowel | 2 |
| 10***16 | Connector | 1 |
| 10***18 | Spring | 2 |
140-1203 Pump Gp-Piston
| 10***78 | Nut-Seal | 2 |
| 10***97 | Valve-Relief | 2 |
| 10***98 | Ring-Backup | 2 |
140-9471 Pump Gp-Piston
| 10***78 | Nut-Seal | 2 |
| 10***96 | Spring-Piston | 2 |
| 10***98 | Ring-Backup | 2 |
187-6162 Tank & Mtg Gp-Hydraulic & Fuel
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***48 | Gasket | 3 |
| 08***16 | Plug | 1 |
124-9843 Tank & Mtg Gp-Hydraulic & Fuel
| 05***33 | Gasket-Tank Unit | 1 |
| 07***00 | Gauge Group-Sight; -Hydraulic Tank | 1 |
| 08***88 | Cap Group-Hydraulic Oil Tank | 1 |
185-9881 Valve & Mtg Gp-Flow Divider
| 08***27 | Seal Washer | 2 |
| 14***43 | Valve Group-Shuttle | 1 |
| 18***57 | Bracket As | 1 |
137-6261 Valve & Mtg Gp-Offset
| 11***91 | Guard As | 1 |
| 13***60 | Valve Group-Offset | 1 |
| 13***61 | Valve & Mtg Group-Offset | 1 |
126-3456 Valve & Mtg Gp-Offset
| 11***67 | Valve Group-Offset | 1 |
| 11***91 | Guard As | 1 |
| 12***56 | Valve & Mtg Group-Offset | 1 |
188-3809 Valve & Mtg Gp-Solenoid
| 08***18 | Block | 1 |
| 08***80 | Screw | 4 |
| 08***91 | Plug; (Filling Filter) | 2 |
110-4433 Valve Gp-Control
| 11***33 | Valve Group-Control | 1 |
| 11***30 | Plate As | 1 |
| 11***37 | Valve Group-Pressure Control | 1 |
110-4511 Valve Gp-Control
| 08***41 | Tie Bar | 3 |
| 08***15 | Tube As | 2 |
| 10***45 | Valve Group-Speed Control | 1 |
123-7530 Valve Gp-Control
| 12***30 | Valve Group-Control | 1 |
| 12***31 | Kit-Seal; (Relief Valve) | 1 |
189-2068 Valve Gp-Flow Divider
| 17***76 | Valve Group-Flow Divider | 1 |
| 18***68 | Valve Group-Flow Divider | 1 |
| 18***70 | Orifice | 1 |
171-3076 Valve Gp-Flow Divider
| 12***21 | Cover | 1 |
| 12***22 | Cover | 1 |
| 12***23 | Flange | 2 |
119-2066 Valve Gp-Flushing
| 11***66 | Valve Group-Flushing | 1 |
| 12***46 | Body-Valve | 1 |
| 2U***58 | Seal Kit Comprises: | 1 |
115-8295 Valve Gp-Manifold
| 11***95 | Valve Group-Manifold | 1 |
| 11***17 | Valve-Flow Control | 2 |
| 11***19 | Kit-Repair; (Check Valve) | 2 |
115-4967 Valve Gp-Offset
| 11***98 | Plate-Locking | 1 |
| 11***67 | Valve Group-Offset | 1 |
| 11***65 | Valve-Relief | 1 |
137-6260 Valve Gp-Offset
| 11***98 | Plate-Locking | 1 |
| 11***66 | Control-Director | 1 |
| 11***67 | Valve-Check | 2 |
113-7137 Valve Gp-Pressure Control
| 08***84 | Bellows | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***37 | Valve Group-Pressure Control | 1 |
149-1282 Valve Gp-Relief
| 11***14 | Spring | 1 |
| 14***82 | Valve Group-Relief | 1 |
| 16***13 | Ring-Backup | 1 |
083-2582 Valve Gp-Relief
| 08***55 | Kit-Seal | 1 |
| 08***82 | Valve Group-Relief; (Pressure Limiter) | 1 |
| 5E***37 | Valve | 1 |
191-5177 Valve Gp-Relief
| 08***82 | Valve Group-Relief; (Pressure Limiter) | 1 |
| 19***76 | Spring | 1 |
| 19***77 | Valve Group-Relief | 1 |
141-5243 Valve Gp-Shuttle
| 14***43 | Valve Group-Shuttle | 1 |
| 18***13 | Fitting | 1 |
| 18***14 | Screw | 1 |
126-3454 Valve Gp-Solenoid
| 08***18 | Block | 1 |
| 08***91 | Plug; (Filling Filter) | 2 |
| 12***14 | Adapter | 2 |
Lubrication System
114-4365 Filler Gp-Engine Oil
| 11***02 | Filler As | 1 |
| 11***03 | Cap; (Engine Oil Fill) | 1 |
| 11***04 | Seal-O-Ring | 1 |
101-3448 Fumes Disposal Gp
| 10***48 | Fumes Disposal Group | 1 |
| 10***49 | Hose; (Crankcase Breather) | 1 |
| 10***50 | Clamp-Hose | 1 |
108-8410 Gauge Gp-Oil Level (Dipstick)
| 10***10 | Gauge Group-Oil Level (Dipstick) | 1 |
| 12***47 | Gauge As-Oil Level (Dipstick) | 1 |
| 12***49 | Tube As | 1 |
114-2376 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***15 | Bolt | 3 |
| 10***12 | Tube | 1 |
139-4670 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
6i-0911 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
Machine Arrangement
178-1065 Chassis Ar
| 11***74 | Guard Group-Crankcase | 1 |
| 11***38 | Enclosure Group-Engine | 1 |
| 12***43 | Tank & Mtg Group-Hydraulic & Fuel | 1 |
116-4515 Chassis Ar
| 11***38 | Hitch Group-Oscillating | 1 |
| 11***74 | Guard Group-Crankcase | 1 |
| 11***38 | Enclosure Group-Engine | 1 |
116-4526 General Ar
| 10***84 | Engine Ar | 1 |
| 11***34 | Seat Group | 1 |
| 11***15 | Chassis Ar | 1 |
Operator Station
1g-3795 Armrest Gp
| 1G***95 | Armrest Group | 1 |
| 1G***61 | Armrest As; (Rh) | 1 |
| 1G***62 | Armrest As; (Lh) | 1 |
125-8644 Bearing Gp-Self-Aligning
| 10***14 | Plate | 2 |
| 10***76 | Pin | 2 |
| 12***91 | Plate | 1 |
126-3422 Cab Ar
| 10***36 | Cab Group | 1 |
| 11***13 | Seat Group-Suspension | 1 |
| 11***60 | Washer Group-Window | 1 |
178-4298 Cab Ar
| 10***36 | Cab Group | 1 |
| 11***60 | Washer Group-Window | 1 |
| 11***61 | Lines Group-Cab Heater | 1 |
114-8905 Cab Gp
| 08***36 | Screw | 1 |
| 08***37 | Nut | 1 |
| 08***67 | Lamp; (24-Volt, 5-Watt) | 2 |
107-5736 Cab Gp
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 10***36 | Cab Group | 1 |
| 11***02 | Spacer; (52mm Thk) | 2 |
124-1808 Canopy Gp
| 12***87 | Canopy As | 1 |
| 12***08 | Canopy Group | 1 |
| 13***28 | Canopy-Soft | 1 |
125-2405 Console Gp-Instrument
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***39 | Holder-Fuse | 6 |
102-0253 Console Gp-Instrument
| 10***53 | Console Group-Instrument | 1 |
| 10***51 | Box As-Instrument | 1 |
| 10***37 | Film-Instruction | 1 |
106-8366 Console Gp-Operator
| 08***45 | Spacer | 1 |
| 10***66 | Console Group-Operator | 1 |
| 11***00 | Harness As-Power | 1 |
125-0295 Door Gp-Cab
| 08***36 | Screw | 1 |
| 08***37 | Nut | 1 |
| 09***68 | Washer; (5x16x1.2-mm Thk) | 11 |
108-7735 Guard Gp-Vandalism
| 10***51 | Cover | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 1G***95 | Bolt | 2 |
123-7764 Handle Gp-Propel & Vib Control
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***19 | Switch-Push Button; (Vibratory Select On/Off) | 1 |
| 10***20 | Ring-Retaining | 1 |
1g-3752 Heater Gp-Cab
| 1G***52 | Heater Group-Cab | 1 |
| 1G***53 | Core As | 1 |
| 1G***72 | Turbine Group-Heater | 1 |
1g-9876 Horn Gp-Electric
| 1G***76 | Horn Group-Electric | 1 |
| 4S***19 | Spacer 12.7 mm(.5 In.) Thick; (10.31x25x12.7-mm Thk) | 1 |
| 6V***44 | Nut - Self Locking (2nd Type) | 1 |
117-5673 Module Gp-Warning Indicator
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 11***73 | Lighting Group-Functional | 1 |
117-5674 Module Gp-Warning Indicator
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 11***74 | Lighting Group-Warning | 1 |
135-2929 Module Gp-Warning Indicator -Engine Temperature
| 11***79 | Lamp; (24-Volt)(Temperature Selection) | 4 |
| 13***29 | Lighting Group-Warning; -Engine Temperature | 1 |
118-7961 Lines Gp-Cab Heater
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***41 | Connector-Tube | 2 |
| 11***61 | Lines Group-Cab Heater | 1 |
124-7002 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 12***02 | Literature Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
126-1332 Lock Gp-Rotation
| 08***38 | Screw As. | 2 |
| 08***77 | Fork | 3 |
| 08***19 | Spring | 1 |
115-3198 Meter Gp-Vibratory
| 10***42 | Diode Group | 1 |
| 11***97 | Harness As | 1 |
| 11***98 | Meter Group-Vibratory | 1 |
122-8681 Meter Gp-Vibratory
| 10***65 | Meter; (Vib Tach) | 1 |
| 12***81 | Meter Group-Vibratory | 1 |
| 5D***19 | Lamp (Miniature) | 1 |
126-3426 Module Gp-Speed & Vibratory
| 08***35 | Regulator As | 1 |
| 08***44 | Disc (Version 0 To 15 Km) | 1 |
| 08***45 | Spacer | 18 |
178-0408 Operator Ar
| 12***05 | Console Group-Instrument | 1 |
| 12***44 | Bearing Group-Self-Aligning | 1 |
| 12***32 | Lock Group-Rotation | 1 |
116-4517 Operator Ar
| 10***53 | Console Group-Instrument | 1 |
| 10***44 | Starting Aid Group | 1 |
| 10***45 | Control Group-Fuel | 1 |
178-0421 Platform Ar-Open
| 10***35 | Guard Group-Vandalism | 1 |
| 12***41 | Support Group-Platform | 1 |
| 14***08 | Seat Group | 1 |
126-3418 Platform Ar-Open
| 10***35 | Guard Group-Platform | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 12***41 | Support Group-Platform | 1 |
113-1876 Platform Ar-Rops
| 10***35 | Guard Group-Platform | 1 |
| 10***35 | Guard Group-Vandalism | 1 |
| 11***34 | Seat Group | 1 |
178-4292 Platform Ar-Rops
| 10***35 | Guard Group-Vandalism | 1 |
| 12***90 | Rops Group | 1 |
| 12***08 | Canopy Group | 1 |
131-5230 Platform Gp-Operator
| 05***02 | Plug | 1 |
| 08***86 | Washer | 1 |
| 08***66 | Screw-Bolt | 4 |
147-6305 Platform Gp-Operator
| 10***04 | Plate As | 2 |
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 11***02 | Spacer; (52mm Thk) | 2 |
125-9094 Platform Gp-Operator
| 10***88 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 11***02 | Spacer; (52mm Thk) | 2 |
| 11***78 | Cover | 1 |
126-1334 Platform Gp-Operator
| 08***86 | Washer | 1 |
| 08***66 | Screw-Bolt | 4 |
| 10***42 | Diode Group | 2 |
081-3628 Pump Gp-Cab Tilt
| 03***05 | Seal-O-Ring | 1 |
| 08***28 | Pump Group-Cab Tilt | 1 |
| 08***17 | Repairing Kit (Rep. 52 To 61) | 1 |
120-5290 Rops Gp
| 10***22 | Rops As | 1 |
| 10***27 | Support As | 1 |
| 10***49 | Support As | 1 |
8y-6856 Seat Belt Gp
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
103-2113 Seat Gp
| 10***72 | Seat | 1 |
| 10***13 | Seat Group | 1 |
| 13***35 | Kit-Adjuster; (Seat) | 1 |
147-1508 Seat Gp
| 10***13 | Seat Group | 1 |
| 10***29 | Seat Belt Group | 1 |
| 10***98 | Kit-Fastener; (Seat) | 1 |
6c-7314 Seat Gp-Suspension
| 10***38 | Handle; (Reclining-Rh) | 1 |
| 10***39 | Handle-Height & Tilt | 1 |
| 13***31 | Kit-Arm Cushion; (Lh) | 1 |
6i-5381 Seat Gp
| 10***40 | Handle-Adjustment; (Lumbar) | 1 |
| 6I***79 | Kit; (Foam Seat) | 1 |
| 6I***80 | Kit-Foam Back; (Seat) | 1 |
149-9685 Seat Gp
| 12***64 | Belt-Tether | 2 |
| 12***80 | Support | 1 |
| 14***85 | Seat Group | 1 |
110-4434 Seat Gp
| 10***13 | Seat Group | 1 |
| 10***29 | Seat Belt Group | 1 |
| 10***98 | Kit-Fastener; (Seat) | 1 |
110-4513 Seat Gp-Suspension
| 11***13 | Seat Group-Suspension | 1 |
| 12***64 | Belt-Tether | 2 |
| 12***80 | Support | 2 |
126-3421 Speedometer Gp
| 08***44 | Disc (Version 0 To 15 Km) | 1 |
| 08***45 | Spacer | 18 |
| 11***26 | Speedometer Group | 1 |
4i-9797 Suspension Gp-Seat
| 4I***97 | Suspension Group-Seat | 1 |
| 4I***98 | Damper Assembly. Kit | 1 |
| 8Y***05 | Kit-Bumper | 1 |
131-5234 Throttle Gp
| 11***18 | Ball Joint | 1 |
| 12***87 | Solenoid Group-Throttle; -Governor | 1 |
| 12***48 | Rod | 1 |
126-3423 Tilt Gp-Cab
| 08***28 | Pump Group-Cab Tilt | 1 |
| 08***96 | Adapter | 2 |
| 08***72 | Lever | 1 |
1g-3772 Heater Gp-Cab
| 10***98 | Motor | 1 |
| 10***56 | Plate-Base | 1 |
| 10***57 | Hood | 2 |
118-7960 Washer Gp-Window
| 11***60 | Washer Group-Window | 1 |
| 12***54 | Harness As | 1 |
| 4P***29 | Clip (26.5mm Id); (26.5 mm Id) | 1 |
121-0001 Window Gp-Sliding
| 12***01 | Window Group-Sliding | 1 |
| 13***54 | Clamp-Window | 2 |
| 13***06 | Glass-Fixed | 1 |
3t-7062 Wiper Gp-Window
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
| 3T***59 | Bracket | 1 |
| 3T***62 | Wiper Group-Window; -Rear | 1 |
Power Train
085-3563 Axle Gp
| 08***76 | Stud; (Wheel) | 10 |
| 08***77 | Nut; (Wheel) | 10 |
| 08***63 | Axle Group | 1 |
126-3443 Drive Gp-Drum
| 08***20 | Support | 2 |
| 10***89 | Support As | 1 |
| 10***72 | Plate As | 1 |
115-1379 Drum Gp-Compactor
| 07***92 | Mount, Rubber Shock | 12 |
| 08***40 | Bar As | 8 |
| 08***47 | Key-Woodruff | 1 |
175-7437 Drum Gp-Drive & Vibratory
| 07***92 | Mount, Rubber Shock | 12 |
| 08***47 | Key-Woodruff | 1 |
| 08***35 | Support | 1 |
126-3428 Drum Gp-Smooth
| 07***92 | Mount, Rubber Shock | 12 |
| 08***20 | Support | 2 |
| 08***40 | Bar As | 8 |
106-8929 Planetary Gp-Final Drive
| 07***64 | Seal-O-Ring | 2 |
| 07***90 | Ring-Retaining | 1 |
| 10***29 | Gearbox Group-Drum Drive; -Rear | 1 |
109-3960 Planetary Gp-Final Drive
| 07***64 | Seal-O-Ring | 1 |
| 10***60 | Gearbox Group-Drum Drive; -Front | 1 |
| 11***62 | Spacer-Thrust | 1 |
189-2067 Hydraulic Ar-Propel
| 18***81 | Valve & Mtg Group-Flow Divider | 1 |
| 18***64 | Lines Group-Hydraulic | 1 |
| 18***65 | Motor & Mtg Group-Propel | 1 |
178-0415 Hydraulic Ar-Propel
| 12***36 | Valve Group-Brake & Shift | 1 |
| 12***42 | Pump Group-Hand | 1 |
| 12***00 | Pump & Mtg Group-Propel | 1 |
116-4519 Hydraulic Ar-Propel
| 11***19 | Hydraulic Ar-Propel | 1 |
| 12***33 | Lines Group-Hydraulic | 1 |
| 12***34 | Lines Group-Service Brake | 1 |
5e-7729 Inflation Gp-Tire
| 08***31 | Collar | 1 |
| 08***12 | Union | 1 |
| 08***13 | Seal-O-Ring | 1 |
126-3432 Installation Gp-Drum
| 08***05 | Shim; (4.76-mm Thk) | 1 |
| 08***33 | Shim; (4.76-mm Thk) | 1 |
| 08***61 | Shim; (3.18-mm Thk) | 2 |
178-0417 Lines Gp-Propel
| 08***86 | Clamp | 1 |
| 10***22 | Hose As | 1 |
| 10***26 | Hose As | 2 |
127-5701 Motor & Mtg Gp-Propel
| 10***98 | Bolt-Head; (M20) | 2 |
| 10***51 | Plate-Adapter | 2 |
| 12***60 | Motor Group-Piston; -Rear | 1 |
189-2065 Motor & Mtg Gp-Propel
| 08***23 | Seal | 2 |
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 8 |
| 15***20 | Motor Group-Piston | 1 |
178-0416 Motor & Mtg Gp-Propel
| 08***23 | Seal | 2 |
| 15***20 | Motor Group-Piston | 1 |
| 15***22 | Motor Group-Piston | 1 |
128-5872 Motor & Mtg Gp-Propel
| 08***61 | Washer-Seal | 8 |
| 08***23 | Seal | 2 |
| 08***29 | Union | 2 |
168-7476 Planetary Gp-Final Drive
| 07***64 | Seal-O-Ring | 2 |
| 07***90 | Ring-Retaining | 1 |
| 11***62 | Spacer-Thrust | 1 |
116-4521 Power Train Ar
| 11***79 | Drum Group-Compactor | 1 |
| 11***21 | Power Train Ar | 1 |
| 12***28 | Drum Group-Smooth | 1 |
127-5700 Pump & Mtg Gp-Propel
| 11***53 | Orifice | 2 |
| 11***54 | Valve-Control; (Distribution Block) | 1 |
| 11***66 | Valve Group-Flushing | 1 |
5e-7521 Tire Gp
| 08***94 | Tube | 1 |
| 1G***79 | Flap-Tire | 1 |
| 1G***81 | Valve | 1 |
084-5513 Tire Gp
| 08***13 | Tire Group; (Central) | 1 |
| 08***94 | Tube | 1 |
| 1G***79 | Flap-Tire | 1 |
082-7040 Tire Gp
| 08***40 | Tire Group; (Central) | 1 |
| 08***31 | Flap | 1 |
| 08***16 | Tire | 1 |
083-1985 Union Gp
| 08***84 | Bolt | 4 |
| 08***25 | Kit-Repair; (Tire Inflation) | 0 |
| 08***22 | Seal | 1 |
151-8457 Valve Gp-Propel
| 11***95 | Valve Group-Manifold | 1 |
| 11***25 | Tube As | 2 |
| 13***73 | Knob | 1 |
150-7844 Valve Gp-Propel
| 15***44 | Cutting Edge; 120 X 120, Cutting Edge; 120 X 120, Cutting Edge, Cutting Edge; 120 Xx 120, Valve Group-Propel | 1 |
| 17***02 | Control Group-Hydraulic | 1 |
| 19***86 | Clamp | 1 |
103-4745 Valve Gp-Speed Control
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***45 | Plug, Tapered | 2 |
| 10***45 | Valve Group-Speed Control | 1 |
116-4522 Wheel Ar-Rear
| 11***22 | Wheel Rear Axle | 1 |
| 12***59 | Wheel Group-Rear | 1 |
| 1G***29 | Wheel Group | 2 |
178-4299 Wheel Ar-Rear
| 17***24 | Wheel Group-Rear | 1 |
| 17***99 | Wheel Rear Axle | 1 |
| 1G***30 | Wheel Group | 2 |
128-5019 Wheel Ar-Rear
| 12***59 | Wheel Group-Rear | 1 |
| 12***19 | Wheel Rear Axle | 1 |
| 1G***30 | Wheel Group | 1 |
178-0423 Wheel Ar-Rear
| 17***23 | Wheel Rear Axle | 1 |
| 17***24 | Wheel Group-Rear | 1 |
| 1G***29 | Wheel Group | 2 |
1g-3931 Wheel Gp
| 08***40 | Tire Group; (Central) | 1 |
| 08***02 | Rim | 1 |
| 1G***31 | Wheel Group | 1 |
1g-3932 Wheel Gp
| 08***97 | Rim | 1 |
| 08***13 | Tire Group; (Central) | 1 |
| 1G***32 | Wheel Group | 1 |
1g-3930 Wheel Gp
| 1G***30 | Wheel Group | 1 |
| 5E***21 | Tire Group; (Scultured)(16-00-20xs) | 1 |
| 5E***22 | Rim | 1 |
1g-3929 Wheel Gp
| 08***24 | Wheel As; (Smooth)(15-00-24) | 1 |
| 08***31 | Flap | 1 |
| 08***98 | Rim | 1 |
178-0424 Wheel Gp-Rear
| 08***32 | Fitting; (Grease) | 1 |
| 08***07 | Snap Ring | 2 |
| 08***76 | Stud; (Wheel) | 10 |
126-3459 Wheel Gp-Rear
| 08***32 | Fitting; (Grease) | 1 |
| 08***08 | Lockwasher; (Cb521,Cb523,Cb525) | 26 |
| 08***07 | Snap Ring | 2 |
Service Equipment And Supplies
128-1729 Film Gp
| 12***29 | Line; Line, Film Group | 1 |
| 3E***58 | Film-Notice; (Starting Procedure) | 1 |
| 6V***11 | Film; Film-Warning. Located On Front Of Fuel | 1 |
128-1728 Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 1 |
| 12***28 | Line; Line, Film Group | 1 |
| 3E***59 | Film-Notice; (Starting Procedure) | 1 |
126-3404 Plate & Film Gp
| 10***22 | Film-Instruction; (Hydraulic Oil Level) | 1 |
| 12***04 | Plate & Film Group | 1 |
| 12***29 | Line; Line, Film Group | 1 |
Steering System
142-8009 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***43 | Steering Column Group | 1 |
116-2361 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 07***65 | Nut, 13/16 | 1 |
| 07***43 | Steering Column Group | 1 |
122-9784 Cylinder & Mtg Gp-Steering
| 03***69 | Bearing | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
126-3449 Lines Gp-Steering
| 08***91 | Clamp | 3 |
| 10***15 | Hose As | 1 |
| 10***25 | Hose As | 1 |
126-3408 Lines Gp-Steering
| 08***70 | Bracket | 1 |
| 10***03 | Plate-Cover | 2 |
| 10***05 | Plate | 1 |
188-9613 Lines Gp-Steering
| 05***58 | "P" Clip | 2 |
| 10***15 | Hose As | 1 |
| 10***25 | Hose As | 1 |
1g-9217 Pump Gp-Metering
| 07***23 | Seal | 1 |
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
| 10***00 | Gerotor | 1 |
Vibratory System
116-4520 Hydraulic Ar-Vibratory
| 11***20 | Hydraulic Ar-Vibratory | 1 |
| 12***44 | Motor & Mtg Group-Vibratory | 1 |
| 12***45 | Pump & Mtg Group-Vibratory | 1 |
178-0419 Hydraulic Ar-Vibratory
| 12***44 | Motor & Mtg Group-Vibratory | 1 |
| 12***45 | Pump & Mtg Group-Vibratory | 1 |
| 13***90 | Lines Group-Vibratory | 1 |
126-3446 Lines Gp-Vibratory
| 10***88 | Bar | 6 |
| 10***41 | Clamp | 1 |
| 10***89 | Hose As | 1 |
137-3390 Lines Gp-Vibratory
| 10***41 | Clamp | 1 |
| 10***89 | Hose As | 1 |
| 10***90 | Hose As | 1 |
126-3444 Motor & Mtg Gp-Vibratory
| 08***48 | Gasket | 1 |
| 08***28 | Disc | 1 |
| 08***33 | Seal-O-Ring | 2 |
126-3445 Pump & Mtg Gp-Vibratory
| 12***45 | Pump & Mtg Group-Vibratory | 1 |
| 1G***00 | Pump Group-Piston | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
178-5361 Pump & Mtg Gp-Vibratory
| 13***11 | Cap; (Tamper Resistant) | 1 |
| 17***61 | Pump & Mtg Group-Vibratory | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
119-0786 Shaft Gp-Vibratory Drive
| 11***80 | Kit-Dust Cap; (Drive Shaft)(Drive Shaft) | 1 |
| 11***86 | Shaft Group-Vibratory Drive | 1 |
| 12***45 | Kit-Universal Joint; (Drive Shaft) | 2 |
126-3447 Valve & Mtg Gp-Vibratory
| 10***29 | Spacer | 1 |
| 12***47 | Valve & Mtg Group-Vibratory | 1 |
| 12***15 | Valve Group-Vibratory; (Cooling/Control) | 1 |
137-1564 Valve & Mtg Gp-Vibratory
| 10***29 | Spacer | 1 |
| 13***84 | Valve Group-Vibratory | 1 |
| 13***64 | Valve & Mtg Group-Vibratory | 1 |
178-6895 Valve & Mtg Gp-Vibratory
| 10***29 | Spacer | 1 |
| 17***22 | Valve Group-Vibratory | 1 |
| 17***95 | Valve & Mtg Group-Vibratory | 1 |
178-0422 Valve Gp-Vibratory
| 08***35 | Kit-Seal | 1 |
| 11***52 | Valve-Pressure | 1 |
| 11***37 | Valve-Relief | 1 |
136-9484 Valve Gp-Vibratory
| 08***35 | Kit-Seal | 1 |
| 11***52 | Valve-Pressure | 1 |
| 11***37 | Valve-Relief | 1 |
127-9815 Valve Gp-Vibratory
| 08***89 | Valve; (Charge Relief) | 1 |
| 08***35 | Kit-Seal | 1 |
| 11***52 | Valve-Pressure | 1 |
106-4125 Weight Gp-Eccentric
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
146-5793 Weight Gp-Eccentric
| 07***08 | Bearing; (Tapered Roller) | 2 |
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
Water System
126-3415 Bar Gp-Spray
| 08***09 | Nut; (Front & Rear) | 2 |
| 08***84 | Cock | 2 |
| 10***93 | Bar Group-Spray; (Cb525b) | 1 |
105-4993 Bar Gp-Spray
| 08***48 | Nozzle | 6 |
| 08***63 | Cap | 6 |
| 08***65 | Seal | 6 |
126-3416 Lines Gp-Water Spray
| 12***16 | Lines Group-Water Spray | 1 |
| 15***86 | Hose; (0.06m)(2 Each) | 0 |
| 5P***61 | Clamp-Hose (11.11mm Id To 19.84mm Id) | 4 |
126-3420 Mat & Mtg Gp-Water
| 09***92 | Locknut; (M6x1-Thd) | 12 |
| 10***11 | Mat As | 1 |
| 12***20 | Mat & Mtg Group-Water | 1 |
6r-4138 Bar Gp-Spray
| 08***48 | Nozzle | 7 |
| 08***63 | Cap | 7 |
| 08***65 | Seal | 7 |
126-3414 Pump Gp-Water Spray
| 01***24 | Bushing To Supply Port | 2 |
| 08***09 | Strainer Group-Water | 1 |
| 08***31 | Elbow | 1 |
127-6228 Pump Gp-Water Spray
| 01***24 | Bushing To Supply Port | 2 |
| 08***09 | Strainer Group-Water | 1 |
| 10***05 | Plate | 1 |
174-9891 Pump Gp-Water Spray
| 13***83 | Kit-Diaphragm; (Water Spray) | 1 |
| 13***85 | Kit-Valve; (Water Spray) | 1 |
| 13***87 | Switch & Housing As; (Water Pressure) | 1 |
116-4516 Spray Ar-Water
| 11***16 | Spray Ar-Water | 1 |
| 12***14 | Pump Group-Water Spray | 1 |
| 12***15 | Bar Group-Spray | 1 |
149-1255 Spray Gp-Water
| 12***51 | Tank Group-Water | 1 |
| 12***28 | Pump Group-Water Spray | 1 |
| 14***55 | Spray Group-Water | 1 |
127-6227 Spray Gp-Water
| 12***51 | Tank Group-Water | 1 |
| 12***27 | Spray Group-Water | 1 |
| 12***28 | Pump Group-Water Spray | 1 |
081-2909 Strainer Gp-Water
| 08***09 | Strainer Group-Water | 1 |
| 13***22 | Bowl | 1 |
| 1G***88 | Screen; (Water) | 1 |
122-8251 Tank Gp-Water
| 08***67 | Screw | 4 |
| 08***49 | Gasket | 1 |
| 08***85 | Strainer | 1 |
126-3417 Tank Gp-Water
| 08***95 | Elbow | 1 |
| 08***44 | Strainer; (Fuel Tank) | 1 |
| 08***74 | Washer | 2 |
116-1391 Valve Gp-Water Check
| 11***91 | Valve Group-Water Check | 1 |
| 12***38 | Valve | 1 |
| 12***39 | Adapter | 1 |
CB-535B serial number reference
The PIN plate on the CB-535B is a riveted metal tag mounted on the machine frame, typically near the articulation joint or on the frame rail below the operator platform. The plate reads as a 3-character prefix followed by a sequential serial number (e.g. 3AR00001); the prefix identifies the model/build series while the digits track build sequence within that series.
| Prefix | Identifies | Notes |
|---|---|---|
| 3AR | CB-535B vibratory smooth-drum paving compactor, base/standard configuration | Full production run of the CB-535B carries this prefix, serial range 3AR00001-UP, powered by the Cat 3054 DIT (turbocharged direct-injection) 4-cylinder diesel, about 80 kW (107 hp) gross at 2200 rpm. Operating weight about 13.4 t (29,547 lb). Drum width 1.7 m (67 in), drum diameter about 1.3 m (51 in). Vibration frequency around 42 Hz. No separate prefix found for a padfoot-shell or extra-width variant; those run as kit options on the same 3AR-prefixed base machine rather than distinct PINs. Confirm exact configuration and any mid-run running changes with your dealer using the full serial number. |
Frequently asked questions
What engine does the Caterpillar CB-535B use?
The CB-535B runs a Caterpillar 3054 DIT, a turbocharged four-cylinder diesel displacing 4.0 liters (244 cu in). Published ratings for this engine sit around 75-80 kW (100-107 hp) near 2200 rpm, with the exact figure depending on whether a gross or net basis is quoted.
What is the operating weight of the Caterpillar CB-535B?
Operating weight runs about 13.4 to 14 t (29,500 to 31,000 lb), depending on cab or canopy choice, tire fitment, and fluid fill. Treat any single published figure as a starting point and confirm against the specific unit's configuration.
What replaced the Caterpillar CB-535B?
Caterpillar carried the combination-compactor concept forward through the CB-534C and CB-534D generations before consolidating the line into its newer CW-series combination compactors. There is no direct like-for-like CB-535C, so parts and service support for this model now leans on that shared combination-compactor family.
What CB-535B owners discuss
What engine is actually in the CB-535B, and what quirks does it have?
The CB-535B runs Cat's 3054 DIT, a turbocharged 4-cylinder diesel of about 4.0 L displacement. Gross output is commonly listed near 80 kW (107 hp) at 2200 rpm; some spec sheets quote a lower net figure around 75 kW (100 hp) — check the engine plate on your unit since gross vs. net rating explains the spread, not two different engines. Known quirks on this engine family: the injection pump front shaft seal can weep diesel into the crankcase, diluting oil (watch for a rising oil level or fuel smell on the dipstick); a weak or intermittent lift pump causes hard starting or stalling under load; and a clogged fuel tank vent can starve the engine by pulling a vacuum in the tank. Routine fuel filter changes and clean fuel prevent most of this. Have your dealer verify any suspected fuel-into-oil contamination before running the engine further.
How does the vibratory drum system typically fail, and what should an owner check first?
The drum is vibrated by a hydraulically driven eccentric weight shaft running on internal bearings. Community consensus on this class of machine: worn or failed eccentric-shaft bearings are the most common cause of weak, intermittent, or dead vibration, often with a grinding or rumbling noise from the drum. A sheared splined coupling between the vibratory motor and the weight shaft produces a similar symptom — the motor turns but the weight doesn't, so vibration stops even though hydraulic pressure looks normal. Before condemning the motor or bearings, check the vibratory bearing lube reservoir level — an overfilled reservoir raises internal case pressure and can choke off the shaft's free rotation, mimicking a bearing failure. Have your dealer verify hydraulic pressure and case-drain flow before replacing any drum-side components.
What wear patterns show up on the drum and tire side of this combination roller?
The CB-535B is a combination compactor: one smooth steel drum up front and pneumatic tires (three-wheel arrangement) at the rear, not a full double-steel-drum tandem. Owners report uneven tire wear and vibration at travel speed when tire pressures aren't kept equal across the axle — this stresses the frame over time. Both the drum scraper and the tire scraper bars need regular adjustment; if they're loose or worn, asphalt or aggregate builds up on the drum and pits the tire rubber, which gets worse if the machine was previously used on aggregate base before switching to asphalt work. The water/release-agent spray system for the drum and tires is a frequent complaint point across this type of roller generally — clogged nozzles or a weak spray pump let material stick and build up, so nozzle and pump checks belong in the daily routine.
What electrical or sensor problems come up on this compactor's propel and vibration controls?
Given the age of this model (built roughly mid-1990s onward), the most reported issue is corrosion or a loose connection in the harness around the propel joystick and console, causing intermittent loss of propel or vibration. First checks are relays, fuses, and harness connectors near the console and joystick before assuming a sensor is bad. The propel circuit reads both a handle/joystick position sensor and a separate proximity sensor for neutral; if the two disagree, the control logic trips a neutral fault and blocks propel even though the handle feels fine. Recalibrating the handle or adjusting the proximity switch gap resolves many of these faults without parts replacement. Exact fault code numbering varies by control system revision, so read active codes with the proper Cat diagnostic tool rather than assuming a code from a different model year applies. Have your dealer verify sensor calibration and wiring before replacing the handle assembly.
Is this a single-drum roller or a tandem, and how does that change maintenance?
Neither in the strict sense — it's a combination utility compactor, sold with a smooth steel drum on one end and pneumatic tires on the other. This matters for maintenance planning: it combines drum-side service items (scraper adjustment, drum bearing lube level, vibratory motor coupling) with tire-side items (pressure equalization across the wheel set, tread and sidewall inspection, tire scraper condition) rather than the all-steel-drum wear pattern of a true tandem asphalt roller. Sources that list it as a plain "single drum roller" or "tandem roller" are using loose category labels; the actual axle layout is drum-front, tire-rear.
What should a buyer check before purchasing a used CB-535B?
This model dates to the mid-1990s through early 2000s, so most surviving units are well past 8,000-9,000 hours; treat a low hour meter reading with suspicion and cross-check it against drum, tire, and seat wear. Inspect the drum shell for dents, pitting, or repair welds. Check tires for even wear across the set and for age-related dry rot/cracking even on low-hour machines, since rubber degrades with time regardless of use. Run the vibration system through its settings and listen for the bearing/coupling symptoms described above. Confirm the water/release spray pump and nozzles actually spray on all outlets. Check engine oil for a milky look or diesel smell (fuel or coolant contamination tied to known 3054 wear points) and check coolant for oil sheen. Cycle the propel joystick through forward, neutral, and reverse repeatedly to check for erratic neutral faults tied to harness or sensor issues. Because this model is long out of production, also confirm with a Cat dealer that replacement parts and service support are still realistically available for the unit's serial/prefix range before committing to purchase. Have your dealer verify engine and hydraulic condition with a full inspection and fluid analysis before finalizing any purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CB-535B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.